* [PATCH] drm/exynos: restore core HDMI settings
@ 2014-02-14 7:34 Shirish S
2014-02-19 10:32 ` Inki Dae
0 siblings, 1 reply; 4+ messages in thread
From: Shirish S @ 2014-02-14 7:34 UTC (permalink / raw)
To: dri-devel, inki.dae; +Cc: sw0312.kim, Shirish S
In DVI mode the video preamble and Guard band should
be disabled whereas it should be applied in HDMI mode,
the re-applying of preamble and guard band was missing,
which resulted in display failures when switched to HDMI
mode from DVI mode.
This patch ensures the setting is applied in HDMI mode.
Signed-off-by: Shirish S <s.shirish@samsung.com>
---
drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index a0e10ae..a102076 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -994,6 +994,8 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
/* choose HDMI mode */
hdmi_reg_writemask(hdata, HDMI_MODE_SEL,
HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
+ /* Apply Video preable and Guard band in HDMI mode only */
+ hdmi_reg_writeb(hdata, HDMI_CON_2, 0);
/* disable bluescreen */
hdmi_reg_writemask(hdata, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/exynos: restore core HDMI settings
2014-02-14 7:34 [PATCH] drm/exynos: restore core HDMI settings Shirish S
@ 2014-02-19 10:32 ` Inki Dae
2014-05-13 4:44 ` Shirish S
0 siblings, 1 reply; 4+ messages in thread
From: Inki Dae @ 2014-02-19 10:32 UTC (permalink / raw)
To: Shirish S; +Cc: Seung-Woo Kim, DRI mailing list
2014-02-14 16:34 GMT+09:00 Shirish S <s.shirish@samsung.com>:
> In DVI mode the video preamble and Guard band should
> be disabled whereas it should be applied in HDMI mode,
> the re-applying of preamble and guard band was missing,
> which resulted in display failures when switched to HDMI
> mode from DVI mode.
> This patch ensures the setting is applied in HDMI mode.
>
> Signed-off-by: Shirish S <s.shirish@samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index a0e10ae..a102076 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -994,6 +994,8 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
> /* choose HDMI mode */
> hdmi_reg_writemask(hdata, HDMI_MODE_SEL,
> HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
> + /* Apply Video preable and Guard band in HDMI mode only */
> + hdmi_reg_writeb(hdata, HDMI_CON_2, 0);
Isn't hdmi_conf_init function always called after hdmi core is reset?
And HDMI_CON_2 would have 0 as reset value. It seems that your code
isn't meaningful.
If you want to set HDMI_CON_2 to HDMI mode in there then it would
better to use meaningful macro, HDMI_VID_PREAMBLE_DIS and
HDMI_GUARD_BAND_DIS.
Thanks,
Inki Dae
> /* disable bluescreen */
> hdmi_reg_writemask(hdata, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
>
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/exynos: restore core HDMI settings
2014-02-19 10:32 ` Inki Dae
@ 2014-05-13 4:44 ` Shirish S
2014-05-16 6:38 ` Inki Dae
0 siblings, 1 reply; 4+ messages in thread
From: Shirish S @ 2014-05-13 4:44 UTC (permalink / raw)
To: Inki Dae; +Cc: Seung-Woo Kim, Shirish S, DRI mailing list
Hi,
On Wed, Feb 19, 2014 at 4:02 PM, Inki Dae <inki.dae@samsung.com> wrote:
> 2014-02-14 16:34 GMT+09:00 Shirish S <s.shirish@samsung.com>:
>> In DVI mode the video preamble and Guard band should
>> be disabled whereas it should be applied in HDMI mode,
>> the re-applying of preamble and guard band was missing,
>> which resulted in display failures when switched to HDMI
>> mode from DVI mode.
>> This patch ensures the setting is applied in HDMI mode.
>>
>> Signed-off-by: Shirish S <s.shirish@samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index a0e10ae..a102076 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -994,6 +994,8 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
>> /* choose HDMI mode */
>> hdmi_reg_writemask(hdata, HDMI_MODE_SEL,
>> HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
>> + /* Apply Video preable and Guard band in HDMI mode only */
>> + hdmi_reg_writeb(hdata, HDMI_CON_2, 0);
>
> Isn't hdmi_conf_init function always called after hdmi core is reset?
> And HDMI_CON_2 would have 0 as reset value. It seems that your code
> isn't meaningful.
>
Now that rahul's patch of "drm/exynos: replace hdmi reset with hdmi disable"
which removes hdmi core reset is merged in your tree,
my patch is required since if the user
connects HDMI monitor via DVI connector,
unplugs and then connects to HDMI TV via HDMI cable, it wont work
as the settings of DVI are still on and not reset-ted.
Can you kindly apply this patch?
> If you want to set HDMI_CON_2 to HDMI mode in there then it would
> better to use meaningful macro, HDMI_VID_PREAMBLE_DIS and
> HDMI_GUARD_BAND_DIS.
>
> Thanks,
> Inki Dae
>
>> /* disable bluescreen */
>> hdmi_reg_writemask(hdata, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
>>
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
Thanks & Regards,
Shirish S
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/exynos: restore core HDMI settings
2014-05-13 4:44 ` Shirish S
@ 2014-05-16 6:38 ` Inki Dae
0 siblings, 0 replies; 4+ messages in thread
From: Inki Dae @ 2014-05-16 6:38 UTC (permalink / raw)
To: Shirish S; +Cc: Seung-Woo Kim, Shirish S, DRI mailing list
On 2014년 05월 13일 13:44, Shirish S wrote:
> Hi,
>
> On Wed, Feb 19, 2014 at 4:02 PM, Inki Dae <inki.dae@samsung.com> wrote:
>> 2014-02-14 16:34 GMT+09:00 Shirish S <s.shirish@samsung.com>:
>>> In DVI mode the video preamble and Guard band should
>>> be disabled whereas it should be applied in HDMI mode,
>>> the re-applying of preamble and guard band was missing,
>>> which resulted in display failures when switched to HDMI
>>> mode from DVI mode.
>>> This patch ensures the setting is applied in HDMI mode.
>>>
>>> Signed-off-by: Shirish S <s.shirish@samsung.com>
>>> ---
>>> drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> index a0e10ae..a102076 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> @@ -994,6 +994,8 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
>>> /* choose HDMI mode */
>>> hdmi_reg_writemask(hdata, HDMI_MODE_SEL,
>>> HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
>>> + /* Apply Video preable and Guard band in HDMI mode only */
>>> + hdmi_reg_writeb(hdata, HDMI_CON_2, 0);
>>
>> Isn't hdmi_conf_init function always called after hdmi core is reset?
>> And HDMI_CON_2 would have 0 as reset value. It seems that your code
>> isn't meaningful.
>>
> Now that rahul's patch of "drm/exynos: replace hdmi reset with hdmi disable"
> which removes hdmi core reset is merged in your tree,
> my patch is required since if the user
> connects HDMI monitor via DVI connector,
> unplugs and then connects to HDMI TV via HDMI cable, it wont work
> as the settings of DVI are still on and not reset-ted.
> Can you kindly apply this patch?
>
Thanks for the report. Applied.
Thanks,
Inki Dae
>> If you want to set HDMI_CON_2 to HDMI mode in there then it would
>> better to use meaningful macro, HDMI_VID_PREAMBLE_DIS and
>> HDMI_GUARD_BAND_DIS.
>>
>> Thanks,
>> Inki Dae
>>
>>> /* disable bluescreen */
>>> hdmi_reg_writemask(hdata, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
>>>
>>> --
>>> 1.7.9.5
>>>
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel@lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> Thanks & Regards,
> Shirish S
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-05-16 6:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-14 7:34 [PATCH] drm/exynos: restore core HDMI settings Shirish S
2014-02-19 10:32 ` Inki Dae
2014-05-13 4:44 ` Shirish S
2014-05-16 6:38 ` Inki Dae
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.