* [PATCH] drm: add FOURCC formats for compute dma_buf interop. [not found] <CAEDM96guoV3x1TpV7Lo1SUL1MXPG9yOir9Kn9Of5Po9YsVn_=A@mail.gmail.com> @ 2014-03-14 17:59 ` Gwenole Beauchesne 2014-03-14 21:52 ` Daniel Vetter 0 siblings, 1 reply; 6+ messages in thread From: Gwenole Beauchesne @ 2014-03-14 17:59 UTC (permalink / raw) To: mesa-dev, dri-devel This is a follow-up to: http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html Add formats meant to convey a "compute" dimension when a DRM fourcc format is needed for dma_buf interop (EGL, OpenCL). Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). - <num_elements>: number of elements in the tuple. Range: [0..3]. - <type>: type of each element. Values: {'_','I','U','F'}, respectively for normalized to [0..1] range, signed integers, unsigned integers, floating-point. - <size_element>: size of the element. Values: {1, 2, 4, 8}. All entities are represented in native-endian byte-order in memory. For example, 'T2F4' format would represent the (float, float) tuple where elements are stored in little-endian byte-order on x86. Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> --- include/drm/drm_fourcc.h | 78 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h index 85facb0..26a2ca8 100644 --- a/include/drm/drm_fourcc.h +++ b/include/drm/drm_fourcc.h @@ -127,4 +127,82 @@ #define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */ #define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */ +/** + * \defgroup api_drm_tuples Compute formats (tuples) + * + * The following formats are not meant for display. Rather, they are + * meant to convey a "compute" dimension when a DRM fourcc format is + * needed for dma_buf interop (EGL, OpenCL). + * + * Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). + * - <num_elements>: number of elements in the tuple. Range: [0..3]. + * - <type>: type of each element. Values: {'_','I','U','F'}, + * respectively for normalized to [0..1] range, signed integers, + * unsigned integers, floating-point. + * - <size_element>: size of the element. Values: {1, 2, 4, 8}. + * + * All entities are represented in native-endian byte-order in memory. + * For example, 'T2F4' format would represent the (float, float) tuple + * where elements are stored in little-endian byte-order on x86. + * + * @{ + */ + +/** Type of a tuple element */ +enum { + DRM_FORMAT_TUPLE_TYPE_UNORM = '_', /**< Unsigned integer value normalized to [0..1] range */ + DRM_FORMAT_TUPLE_TYPE_SINT = 'I', /**< Signed integer value */ + DRM_FORMAT_TUPLE_TYPE_UINT = 'U', /**< Unsigned integer value */ + DRM_FORMAT_TUPLE_TYPE_FLOAT = 'F', /**< Floating-point value */ +}; + +/** Generates a FOURCC value for a tuple */ +#define DRM_FORMAT_TUPLE(num_elements, type, size) \ + fourcc_code('T', '0'+(num_elements), DRM_FORMAT_TUPLE_TYPE_##type, '0'+(size)) + +/** @name Unsigned integers normalized to [0..1] range */ +/**@{*/ +#define DRM_FORMAT_T1_1 DRM_FORMAT_TUPLE(1, UNORM, 1) /** (X), 8-bit integers normalized to [0..1] range */ +#define DRM_FORMAT_T2_1 DRM_FORMAT_TUPLE(2, UNORM, 1) /** (X, Y), 8-bit integers normalized to [0..1] range */ +#define DRM_FORMAT_T4_1 DRM_FORMAT_TUPLE(4, UNORM, 1) /** (X, Y, Z, W), 8-bit integers normalized to [0..1] range */ +#define DRM_FORMAT_T1_2 DRM_FORMAT_TUPLE(1, UNORM, 2) /** (X), 16-bit integers normalized to [0..1] range */ +#define DRM_FORMAT_T2_2 DRM_FORMAT_TUPLE(2, UNORM, 2) /** (X, Y), 16-bit integers normalized to [0..1] range */ +#define DRM_FORMAT_T4_2 DRM_FORMAT_TUPLE(4, UNORM, 2) /** (X, Y, Z, W), 16-bit integers normalized to [0..1] range */ +/**@}*/ + +/** @name Signed integer values */ +/**@{*/ +#define DRM_FORMAT_T1I1 DRM_FORMAT_TUPLE(1, SINT, 1) /** (X), 8-bit signed integer */ +#define DRM_FORMAT_T2I1 DRM_FORMAT_TUPLE(2, SINT, 1) /** (X, Y), 8-bit signed integer */ +#define DRM_FORMAT_T4I1 DRM_FORMAT_TUPLE(4, SINT, 1) /** (X, Y, Z, W), 8-bit signed integer */ +#define DRM_FORMAT_T1I2 DRM_FORMAT_TUPLE(1, SINT, 2) /** (X), 16-bit signed integer */ +#define DRM_FORMAT_T2I2 DRM_FORMAT_TUPLE(2, SINT, 2) /** (X, Y), 16-bit signed integer */ +#define DRM_FORMAT_T4I2 DRM_FORMAT_TUPLE(4, SINT, 2) /** (X, Y, Z, W), 16-bit signed integer */ +#define DRM_FORMAT_T1I4 DRM_FORMAT_TUPLE(1, SINT, 4) /** (X), 32-bit signed integer */ +#define DRM_FORMAT_T2I4 DRM_FORMAT_TUPLE(2, SINT, 4) /** (X, Y), 32-bit signed integer */ +#define DRM_FORMAT_T4I4 DRM_FORMAT_TUPLE(4, SINT, 4) /** (X, Y, Z, W), 32-bit signed integer */ +/**@}*/ + +/** @name Unsigned integer values */ +/**@{*/ +#define DRM_FORMAT_T1U1 DRM_FORMAT_TUPLE(1, UINT, 1) /** (X), 8-bit unsigned integer */ +#define DRM_FORMAT_T2U1 DRM_FORMAT_TUPLE(2, UINT, 1) /** (X, Y), 8-bit unsigned integer */ +#define DRM_FORMAT_T4U1 DRM_FORMAT_TUPLE(4, UINT, 1) /** (X, Y, Z, W), 8-bit unsigned integer */ +#define DRM_FORMAT_T1U2 DRM_FORMAT_TUPLE(1, UINT, 2) /** (X), 16-bit unsigned integer */ +#define DRM_FORMAT_T2U2 DRM_FORMAT_TUPLE(2, UINT, 2) /** (X, Y), 16-bit unsigned integer */ +#define DRM_FORMAT_T4U2 DRM_FORMAT_TUPLE(4, UINT, 2) /** (X, Y, Z, W), 16-bit unsigned integer */ +#define DRM_FORMAT_T1U4 DRM_FORMAT_TUPLE(1, UINT, 4) /** (X), 32-bit unsigned integer */ +#define DRM_FORMAT_T2U4 DRM_FORMAT_TUPLE(2, UINT, 4) /** (X, Y), 32-bit unsigned integer */ +#define DRM_FORMAT_T4U4 DRM_FORMAT_TUPLE(4, UINT, 4) /** (X, Y, Z, W), 32-bit unsigned integer */ +/**@}*/ + +/** @name Floating-point values */ +/**@{*/ +#define DRM_FORMAT_T1F4 DRM_FORMAT_TUPLE(1, FLOAT, 4) /** (X), 32-bit floating-point */ +#define DRM_FORMAT_T2F4 DRM_FORMAT_TUPLE(2, FLOAT, 4) /** (X, Y), 32-bit floating-point */ +#define DRM_FORMAT_T4F4 DRM_FORMAT_TUPLE(4, FLOAT, 4) /** (X, Y, Z, W), 32-bit floating-point */ +/**@}*/ + +/**@}*/ + #endif /* DRM_FOURCC_H */ -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] drm: add FOURCC formats for compute dma_buf interop. 2014-03-14 17:59 ` [PATCH] drm: add FOURCC formats for compute dma_buf interop Gwenole Beauchesne @ 2014-03-14 21:52 ` Daniel Vetter 2014-03-15 4:41 ` Gwenole Beauchesne 0 siblings, 1 reply; 6+ messages in thread From: Daniel Vetter @ 2014-03-14 21:52 UTC (permalink / raw) To: Gwenole Beauchesne; +Cc: mesa-dev, dri-devel On Fri, Mar 14, 2014 at 06:59:21PM +0100, Gwenole Beauchesne wrote: > This is a follow-up to: > http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html > > Add formats meant to convey a "compute" dimension when a DRM fourcc > format is needed for dma_buf interop (EGL, OpenCL). > > Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). > - <num_elements>: number of elements in the tuple. Range: [0..3]. > - <type>: type of each element. Values: {'_','I','U','F'}, > respectively for normalized to [0..1] range, signed integers, > unsigned integers, floating-point. > - <size_element>: size of the element. Values: {1, 2, 4, 8}. > > All entities are represented in native-endian byte-order in memory. > For example, 'T2F4' format would represent the (float, float) tuple > where elements are stored in little-endian byte-order on x86. > > Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> So this fourcc stuff started out as pixel formats for the ADDFB2 ioctl, i.e. stuff that can be displayed. Hence my first question: How can we display these bastards here? Next up: dma-buf has absolutely no intrinsic concept of the contents of a buffer. It's a raw pile of bytes with a fixed length. So given all this: Why do we need this in the kernel's header? It sounds like purely a userspace business with no need at all the enshrine this into kernel ABI headers. Note that e.g. the mesa import/export interface have their own fourcc #defines for exactly this reason. -Daniel > --- > include/drm/drm_fourcc.h | 78 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 78 insertions(+) > > diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h > index 85facb0..26a2ca8 100644 > --- a/include/drm/drm_fourcc.h > +++ b/include/drm/drm_fourcc.h > @@ -127,4 +127,82 @@ > #define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */ > #define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */ > > +/** > + * \defgroup api_drm_tuples Compute formats (tuples) > + * > + * The following formats are not meant for display. Rather, they are > + * meant to convey a "compute" dimension when a DRM fourcc format is > + * needed for dma_buf interop (EGL, OpenCL). > + * > + * Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). > + * - <num_elements>: number of elements in the tuple. Range: [0..3]. > + * - <type>: type of each element. Values: {'_','I','U','F'}, > + * respectively for normalized to [0..1] range, signed integers, > + * unsigned integers, floating-point. > + * - <size_element>: size of the element. Values: {1, 2, 4, 8}. > + * > + * All entities are represented in native-endian byte-order in memory. > + * For example, 'T2F4' format would represent the (float, float) tuple > + * where elements are stored in little-endian byte-order on x86. > + * > + * @{ > + */ > + > +/** Type of a tuple element */ > +enum { > + DRM_FORMAT_TUPLE_TYPE_UNORM = '_', /**< Unsigned integer value normalized to [0..1] range */ > + DRM_FORMAT_TUPLE_TYPE_SINT = 'I', /**< Signed integer value */ > + DRM_FORMAT_TUPLE_TYPE_UINT = 'U', /**< Unsigned integer value */ > + DRM_FORMAT_TUPLE_TYPE_FLOAT = 'F', /**< Floating-point value */ > +}; > + > +/** Generates a FOURCC value for a tuple */ > +#define DRM_FORMAT_TUPLE(num_elements, type, size) \ > + fourcc_code('T', '0'+(num_elements), DRM_FORMAT_TUPLE_TYPE_##type, '0'+(size)) > + > +/** @name Unsigned integers normalized to [0..1] range */ > +/**@{*/ > +#define DRM_FORMAT_T1_1 DRM_FORMAT_TUPLE(1, UNORM, 1) /** (X), 8-bit integers normalized to [0..1] range */ > +#define DRM_FORMAT_T2_1 DRM_FORMAT_TUPLE(2, UNORM, 1) /** (X, Y), 8-bit integers normalized to [0..1] range */ > +#define DRM_FORMAT_T4_1 DRM_FORMAT_TUPLE(4, UNORM, 1) /** (X, Y, Z, W), 8-bit integers normalized to [0..1] range */ > +#define DRM_FORMAT_T1_2 DRM_FORMAT_TUPLE(1, UNORM, 2) /** (X), 16-bit integers normalized to [0..1] range */ > +#define DRM_FORMAT_T2_2 DRM_FORMAT_TUPLE(2, UNORM, 2) /** (X, Y), 16-bit integers normalized to [0..1] range */ > +#define DRM_FORMAT_T4_2 DRM_FORMAT_TUPLE(4, UNORM, 2) /** (X, Y, Z, W), 16-bit integers normalized to [0..1] range */ > +/**@}*/ > + > +/** @name Signed integer values */ > +/**@{*/ > +#define DRM_FORMAT_T1I1 DRM_FORMAT_TUPLE(1, SINT, 1) /** (X), 8-bit signed integer */ > +#define DRM_FORMAT_T2I1 DRM_FORMAT_TUPLE(2, SINT, 1) /** (X, Y), 8-bit signed integer */ > +#define DRM_FORMAT_T4I1 DRM_FORMAT_TUPLE(4, SINT, 1) /** (X, Y, Z, W), 8-bit signed integer */ > +#define DRM_FORMAT_T1I2 DRM_FORMAT_TUPLE(1, SINT, 2) /** (X), 16-bit signed integer */ > +#define DRM_FORMAT_T2I2 DRM_FORMAT_TUPLE(2, SINT, 2) /** (X, Y), 16-bit signed integer */ > +#define DRM_FORMAT_T4I2 DRM_FORMAT_TUPLE(4, SINT, 2) /** (X, Y, Z, W), 16-bit signed integer */ > +#define DRM_FORMAT_T1I4 DRM_FORMAT_TUPLE(1, SINT, 4) /** (X), 32-bit signed integer */ > +#define DRM_FORMAT_T2I4 DRM_FORMAT_TUPLE(2, SINT, 4) /** (X, Y), 32-bit signed integer */ > +#define DRM_FORMAT_T4I4 DRM_FORMAT_TUPLE(4, SINT, 4) /** (X, Y, Z, W), 32-bit signed integer */ > +/**@}*/ > + > +/** @name Unsigned integer values */ > +/**@{*/ > +#define DRM_FORMAT_T1U1 DRM_FORMAT_TUPLE(1, UINT, 1) /** (X), 8-bit unsigned integer */ > +#define DRM_FORMAT_T2U1 DRM_FORMAT_TUPLE(2, UINT, 1) /** (X, Y), 8-bit unsigned integer */ > +#define DRM_FORMAT_T4U1 DRM_FORMAT_TUPLE(4, UINT, 1) /** (X, Y, Z, W), 8-bit unsigned integer */ > +#define DRM_FORMAT_T1U2 DRM_FORMAT_TUPLE(1, UINT, 2) /** (X), 16-bit unsigned integer */ > +#define DRM_FORMAT_T2U2 DRM_FORMAT_TUPLE(2, UINT, 2) /** (X, Y), 16-bit unsigned integer */ > +#define DRM_FORMAT_T4U2 DRM_FORMAT_TUPLE(4, UINT, 2) /** (X, Y, Z, W), 16-bit unsigned integer */ > +#define DRM_FORMAT_T1U4 DRM_FORMAT_TUPLE(1, UINT, 4) /** (X), 32-bit unsigned integer */ > +#define DRM_FORMAT_T2U4 DRM_FORMAT_TUPLE(2, UINT, 4) /** (X, Y), 32-bit unsigned integer */ > +#define DRM_FORMAT_T4U4 DRM_FORMAT_TUPLE(4, UINT, 4) /** (X, Y, Z, W), 32-bit unsigned integer */ > +/**@}*/ > + > +/** @name Floating-point values */ > +/**@{*/ > +#define DRM_FORMAT_T1F4 DRM_FORMAT_TUPLE(1, FLOAT, 4) /** (X), 32-bit floating-point */ > +#define DRM_FORMAT_T2F4 DRM_FORMAT_TUPLE(2, FLOAT, 4) /** (X, Y), 32-bit floating-point */ > +#define DRM_FORMAT_T4F4 DRM_FORMAT_TUPLE(4, FLOAT, 4) /** (X, Y, Z, W), 32-bit floating-point */ > +/**@}*/ > + > +/**@}*/ > + > #endif /* DRM_FOURCC_H */ > -- > 1.7.9.5 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm: add FOURCC formats for compute dma_buf interop. 2014-03-14 21:52 ` Daniel Vetter @ 2014-03-15 4:41 ` Gwenole Beauchesne 2014-03-15 11:28 ` Daniel Vetter 0 siblings, 1 reply; 6+ messages in thread From: Gwenole Beauchesne @ 2014-03-15 4:41 UTC (permalink / raw) To: Daniel Vetter; +Cc: mesa-dev, dri-devel Hi, 2014-03-14 22:52 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: > On Fri, Mar 14, 2014 at 06:59:21PM +0100, Gwenole Beauchesne wrote: >> This is a follow-up to: >> http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html >> >> Add formats meant to convey a "compute" dimension when a DRM fourcc >> format is needed for dma_buf interop (EGL, OpenCL). >> >> Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). >> - <num_elements>: number of elements in the tuple. Range: [0..3]. >> - <type>: type of each element. Values: {'_','I','U','F'}, >> respectively for normalized to [0..1] range, signed integers, >> unsigned integers, floating-point. >> - <size_element>: size of the element. Values: {1, 2, 4, 8}. >> >> All entities are represented in native-endian byte-order in memory. >> For example, 'T2F4' format would represent the (float, float) tuple >> where elements are stored in little-endian byte-order on x86. >> >> Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> > > So this fourcc stuff started out as pixel formats for the ADDFB2 ioctl, > i.e. stuff that can be displayed. Hence my first question: How can we > display these bastards here? It's not meant to be displayed. The idea was maybe we could detect the fourcc (e.g. (fourcc & 0xff) == 'T') and reject the buffer accordingly when submitted to one of the display ioctl? > So given all this: Why do we need this in the kernel's header? It sounds > like purely a userspace business with no need at all the enshrine this > into kernel ABI headers. Note that e.g. the mesa import/export interface > have their own fourcc #defines for exactly this reason. I could have stuffed everything in gbm.h for instance, or another new header, but the EXT_dma_buf_import extension actually mentions drm_fourcc.h. So, that's why I finally moved the definitions to there. :) What would be the better place? Can we make the userspace libdrm version of the file live totally unsynchronized from the kernel headers then? Thanks, Gwenole. >> include/drm/drm_fourcc.h | 78 ++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 78 insertions(+) >> >> diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h >> index 85facb0..26a2ca8 100644 >> --- a/include/drm/drm_fourcc.h >> +++ b/include/drm/drm_fourcc.h >> @@ -127,4 +127,82 @@ >> #define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */ >> #define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */ >> >> +/** >> + * \defgroup api_drm_tuples Compute formats (tuples) >> + * >> + * The following formats are not meant for display. Rather, they are >> + * meant to convey a "compute" dimension when a DRM fourcc format is >> + * needed for dma_buf interop (EGL, OpenCL). >> + * >> + * Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). >> + * - <num_elements>: number of elements in the tuple. Range: [0..3]. >> + * - <type>: type of each element. Values: {'_','I','U','F'}, >> + * respectively for normalized to [0..1] range, signed integers, >> + * unsigned integers, floating-point. >> + * - <size_element>: size of the element. Values: {1, 2, 4, 8}. >> + * >> + * All entities are represented in native-endian byte-order in memory. >> + * For example, 'T2F4' format would represent the (float, float) tuple >> + * where elements are stored in little-endian byte-order on x86. >> + * >> + * @{ >> + */ >> + >> +/** Type of a tuple element */ >> +enum { >> + DRM_FORMAT_TUPLE_TYPE_UNORM = '_', /**< Unsigned integer value normalized to [0..1] range */ >> + DRM_FORMAT_TUPLE_TYPE_SINT = 'I', /**< Signed integer value */ >> + DRM_FORMAT_TUPLE_TYPE_UINT = 'U', /**< Unsigned integer value */ >> + DRM_FORMAT_TUPLE_TYPE_FLOAT = 'F', /**< Floating-point value */ >> +}; >> + >> +/** Generates a FOURCC value for a tuple */ >> +#define DRM_FORMAT_TUPLE(num_elements, type, size) \ >> + fourcc_code('T', '0'+(num_elements), DRM_FORMAT_TUPLE_TYPE_##type, '0'+(size)) >> + >> +/** @name Unsigned integers normalized to [0..1] range */ >> +/**@{*/ >> +#define DRM_FORMAT_T1_1 DRM_FORMAT_TUPLE(1, UNORM, 1) /** (X), 8-bit integers normalized to [0..1] range */ >> +#define DRM_FORMAT_T2_1 DRM_FORMAT_TUPLE(2, UNORM, 1) /** (X, Y), 8-bit integers normalized to [0..1] range */ >> +#define DRM_FORMAT_T4_1 DRM_FORMAT_TUPLE(4, UNORM, 1) /** (X, Y, Z, W), 8-bit integers normalized to [0..1] range */ >> +#define DRM_FORMAT_T1_2 DRM_FORMAT_TUPLE(1, UNORM, 2) /** (X), 16-bit integers normalized to [0..1] range */ >> +#define DRM_FORMAT_T2_2 DRM_FORMAT_TUPLE(2, UNORM, 2) /** (X, Y), 16-bit integers normalized to [0..1] range */ >> +#define DRM_FORMAT_T4_2 DRM_FORMAT_TUPLE(4, UNORM, 2) /** (X, Y, Z, W), 16-bit integers normalized to [0..1] range */ >> +/**@}*/ >> + >> +/** @name Signed integer values */ >> +/**@{*/ >> +#define DRM_FORMAT_T1I1 DRM_FORMAT_TUPLE(1, SINT, 1) /** (X), 8-bit signed integer */ >> +#define DRM_FORMAT_T2I1 DRM_FORMAT_TUPLE(2, SINT, 1) /** (X, Y), 8-bit signed integer */ >> +#define DRM_FORMAT_T4I1 DRM_FORMAT_TUPLE(4, SINT, 1) /** (X, Y, Z, W), 8-bit signed integer */ >> +#define DRM_FORMAT_T1I2 DRM_FORMAT_TUPLE(1, SINT, 2) /** (X), 16-bit signed integer */ >> +#define DRM_FORMAT_T2I2 DRM_FORMAT_TUPLE(2, SINT, 2) /** (X, Y), 16-bit signed integer */ >> +#define DRM_FORMAT_T4I2 DRM_FORMAT_TUPLE(4, SINT, 2) /** (X, Y, Z, W), 16-bit signed integer */ >> +#define DRM_FORMAT_T1I4 DRM_FORMAT_TUPLE(1, SINT, 4) /** (X), 32-bit signed integer */ >> +#define DRM_FORMAT_T2I4 DRM_FORMAT_TUPLE(2, SINT, 4) /** (X, Y), 32-bit signed integer */ >> +#define DRM_FORMAT_T4I4 DRM_FORMAT_TUPLE(4, SINT, 4) /** (X, Y, Z, W), 32-bit signed integer */ >> +/**@}*/ >> + >> +/** @name Unsigned integer values */ >> +/**@{*/ >> +#define DRM_FORMAT_T1U1 DRM_FORMAT_TUPLE(1, UINT, 1) /** (X), 8-bit unsigned integer */ >> +#define DRM_FORMAT_T2U1 DRM_FORMAT_TUPLE(2, UINT, 1) /** (X, Y), 8-bit unsigned integer */ >> +#define DRM_FORMAT_T4U1 DRM_FORMAT_TUPLE(4, UINT, 1) /** (X, Y, Z, W), 8-bit unsigned integer */ >> +#define DRM_FORMAT_T1U2 DRM_FORMAT_TUPLE(1, UINT, 2) /** (X), 16-bit unsigned integer */ >> +#define DRM_FORMAT_T2U2 DRM_FORMAT_TUPLE(2, UINT, 2) /** (X, Y), 16-bit unsigned integer */ >> +#define DRM_FORMAT_T4U2 DRM_FORMAT_TUPLE(4, UINT, 2) /** (X, Y, Z, W), 16-bit unsigned integer */ >> +#define DRM_FORMAT_T1U4 DRM_FORMAT_TUPLE(1, UINT, 4) /** (X), 32-bit unsigned integer */ >> +#define DRM_FORMAT_T2U4 DRM_FORMAT_TUPLE(2, UINT, 4) /** (X, Y), 32-bit unsigned integer */ >> +#define DRM_FORMAT_T4U4 DRM_FORMAT_TUPLE(4, UINT, 4) /** (X, Y, Z, W), 32-bit unsigned integer */ >> +/**@}*/ >> + >> +/** @name Floating-point values */ >> +/**@{*/ >> +#define DRM_FORMAT_T1F4 DRM_FORMAT_TUPLE(1, FLOAT, 4) /** (X), 32-bit floating-point */ >> +#define DRM_FORMAT_T2F4 DRM_FORMAT_TUPLE(2, FLOAT, 4) /** (X, Y), 32-bit floating-point */ >> +#define DRM_FORMAT_T4F4 DRM_FORMAT_TUPLE(4, FLOAT, 4) /** (X, Y, Z, W), 32-bit floating-point */ >> +/**@}*/ >> + >> +/**@}*/ >> + >> #endif /* DRM_FOURCC_H */ >> -- >> 1.7.9.5 >> >> _______________________________________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/dri-devel > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm: add FOURCC formats for compute dma_buf interop. 2014-03-15 4:41 ` Gwenole Beauchesne @ 2014-03-15 11:28 ` Daniel Vetter 2014-03-19 6:30 ` Gwenole Beauchesne 0 siblings, 1 reply; 6+ messages in thread From: Daniel Vetter @ 2014-03-15 11:28 UTC (permalink / raw) To: Gwenole Beauchesne; +Cc: mesa-dev, dri-devel On Sat, Mar 15, 2014 at 05:41:05AM +0100, Gwenole Beauchesne wrote: > Hi, > > 2014-03-14 22:52 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: > > On Fri, Mar 14, 2014 at 06:59:21PM +0100, Gwenole Beauchesne wrote: > >> This is a follow-up to: > >> http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html > >> > >> Add formats meant to convey a "compute" dimension when a DRM fourcc > >> format is needed for dma_buf interop (EGL, OpenCL). > >> > >> Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). > >> - <num_elements>: number of elements in the tuple. Range: [0..3]. > >> - <type>: type of each element. Values: {'_','I','U','F'}, > >> respectively for normalized to [0..1] range, signed integers, > >> unsigned integers, floating-point. > >> - <size_element>: size of the element. Values: {1, 2, 4, 8}. > >> > >> All entities are represented in native-endian byte-order in memory. > >> For example, 'T2F4' format would represent the (float, float) tuple > >> where elements are stored in little-endian byte-order on x86. > >> > >> Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> > > > > So this fourcc stuff started out as pixel formats for the ADDFB2 ioctl, > > i.e. stuff that can be displayed. Hence my first question: How can we > > display these bastards here? > > It's not meant to be displayed. The idea was maybe we could detect the > fourcc (e.g. (fourcc & 0xff) == 'T') and reject the buffer accordingly > when submitted to one of the display ioctl? Well we already have explicit lists for all that, so no need to add a pile of formats just to be able to reject them ;-) > > So given all this: Why do we need this in the kernel's header? It sounds > > like purely a userspace business with no need at all the enshrine this > > into kernel ABI headers. Note that e.g. the mesa import/export interface > > have their own fourcc #defines for exactly this reason. > > I could have stuffed everything in gbm.h for instance, or another new > header, but the EXT_dma_buf_import extension actually mentions > drm_fourcc.h. So, that's why I finally moved the definitions to there. > :) That's a bit unfortunate ... But the spec also clearly states "as used by the drm_mode_fb_cmd2 ioctl". And imo we can't make a case that this is true. > What would be the better place? Can we make the userspace libdrm > version of the file live totally unsynchronized from the kernel > headers then? I think the right approach would be to ref the specification and also allow other fourcc codes for non-display related buffer layaouts, maybe in a different namespace. This entire fourcc stuff was only done since it was a somewhat ill-defined "standard" for all kinds of YUV buffers. We've already had to massivel pimp it to make it work properly with RGB. Pimping this even further to support all kinds of random compute/gl buffers sounds ill-advised. I think we need to steal a new namespace from some existing standard for all this, maybe ogl or ocl has something? Ofc that means creating a new dma_buf_import atttribute for eglCreateImageKHR which could be used instead of DRM_FOURCC_EXT. Cheers, Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm: add FOURCC formats for compute dma_buf interop. 2014-03-15 11:28 ` Daniel Vetter @ 2014-03-19 6:30 ` Gwenole Beauchesne 2014-03-19 10:31 ` Daniel Vetter 0 siblings, 1 reply; 6+ messages in thread From: Gwenole Beauchesne @ 2014-03-19 6:30 UTC (permalink / raw) To: Daniel Vetter; +Cc: mesa-dev, dri-devel Hi, 2014-03-15 12:28 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: > On Sat, Mar 15, 2014 at 05:41:05AM +0100, Gwenole Beauchesne wrote: >> Hi, >> >> 2014-03-14 22:52 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: >> > On Fri, Mar 14, 2014 at 06:59:21PM +0100, Gwenole Beauchesne wrote: >> >> This is a follow-up to: >> >> http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html >> >> >> >> Add formats meant to convey a "compute" dimension when a DRM fourcc >> >> format is needed for dma_buf interop (EGL, OpenCL). >> >> >> >> Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). >> >> - <num_elements>: number of elements in the tuple. Range: [0..3]. >> >> - <type>: type of each element. Values: {'_','I','U','F'}, >> >> respectively for normalized to [0..1] range, signed integers, >> >> unsigned integers, floating-point. >> >> - <size_element>: size of the element. Values: {1, 2, 4, 8}. >> >> >> >> All entities are represented in native-endian byte-order in memory. >> >> For example, 'T2F4' format would represent the (float, float) tuple >> >> where elements are stored in little-endian byte-order on x86. >> >> >> >> Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> >> > >> > So this fourcc stuff started out as pixel formats for the ADDFB2 ioctl, >> > i.e. stuff that can be displayed. Hence my first question: How can we >> > display these bastards here? >> >> It's not meant to be displayed. The idea was maybe we could detect the >> fourcc (e.g. (fourcc & 0xff) == 'T') and reject the buffer accordingly >> when submitted to one of the display ioctl? > > Well we already have explicit lists for all that, so no need to add a pile > of formats just to be able to reject them ;-) > >> > So given all this: Why do we need this in the kernel's header? It sounds >> > like purely a userspace business with no need at all the enshrine this >> > into kernel ABI headers. Note that e.g. the mesa import/export interface >> > have their own fourcc #defines for exactly this reason. >> >> I could have stuffed everything in gbm.h for instance, or another new >> header, but the EXT_dma_buf_import extension actually mentions >> drm_fourcc.h. So, that's why I finally moved the definitions to there. >> :) > > That's a bit unfortunate ... But the spec also clearly states "as used by > the drm_mode_fb_cmd2 ioctl". And imo we can't make a case that this is > true. > >> What would be the better place? Can we make the userspace libdrm >> version of the file live totally unsynchronized from the kernel >> headers then? > > I think the right approach would be to ref the specification and also > allow other fourcc codes for non-display related buffer layaouts, maybe in > a different namespace. This entire fourcc stuff was only done since it was > a somewhat ill-defined "standard" for all kinds of YUV buffers. We've > already had to massivel pimp it to make it work properly with RGB. > > Pimping this even further to support all kinds of random compute/gl > buffers sounds ill-advised. I think we need to steal a new namespace from > some existing standard for all this, maybe ogl or ocl has something? Ofc > that means creating a new dma_buf_import atttribute for eglCreateImageKHR > which could be used instead of DRM_FOURCC_EXT. Thinking further about it, the patch is totally useless. It should be enough to amend the EXT_image_dma_buf_import spec to allow for using the GL format/type enums instead... Now, what are the chances to have the required changes to appear in a new revision of the spec? :) I'd suggest the following formalism: - If EGL_LINUX_DRM_FOURCC_EXT attribute is 0 (zero), then a GL format/type pair needs to be supplied to the <attrib_list> - Accepted as an attribute to <attrib_list> would be EGL_GL_FORMAT_EXT / EGL_GL_TYPE_EXT, where EGL_GL_FORMAT_EXT attribute value would be GL_{RED,RG,RGB,RGBA} as usual, and EGL_GL_TYPE_EXT value would be GL_{{UNSIGNED_,}{BYTE,SHORT,INT},{HALF_,}FLOAT}. Alternative would be to provide a unique "internal format", but this would complicate implementations, for sanity checks (too large switch cases). WDYT? ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm: add FOURCC formats for compute dma_buf interop. 2014-03-19 6:30 ` Gwenole Beauchesne @ 2014-03-19 10:31 ` Daniel Vetter 0 siblings, 0 replies; 6+ messages in thread From: Daniel Vetter @ 2014-03-19 10:31 UTC (permalink / raw) To: Gwenole Beauchesne, Tom Cooksey, Jesse Barker, Clark, Rob Cc: mesa-dev, dri-devel On Wed, Mar 19, 2014 at 7:30 AM, Gwenole Beauchesne <gb.devel@gmail.com> wrote: > 2014-03-15 12:28 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: >> On Sat, Mar 15, 2014 at 05:41:05AM +0100, Gwenole Beauchesne wrote: >>> Hi, >>> >>> 2014-03-14 22:52 GMT+01:00 Daniel Vetter <daniel@ffwll.ch>: >>> > On Fri, Mar 14, 2014 at 06:59:21PM +0100, Gwenole Beauchesne wrote: >>> >> This is a follow-up to: >>> >> http://lists.freedesktop.org/archives/mesa-dev/2014-March/055742.html >>> >> >>> >> Add formats meant to convey a "compute" dimension when a DRM fourcc >>> >> format is needed for dma_buf interop (EGL, OpenCL). >>> >> >>> >> Intended FOURCC format: ('T',<num_elements>,<type>,<size_element>). >>> >> - <num_elements>: number of elements in the tuple. Range: [0..3]. >>> >> - <type>: type of each element. Values: {'_','I','U','F'}, >>> >> respectively for normalized to [0..1] range, signed integers, >>> >> unsigned integers, floating-point. >>> >> - <size_element>: size of the element. Values: {1, 2, 4, 8}. >>> >> >>> >> All entities are represented in native-endian byte-order in memory. >>> >> For example, 'T2F4' format would represent the (float, float) tuple >>> >> where elements are stored in little-endian byte-order on x86. >>> >> >>> >> Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com> >>> > >>> > So this fourcc stuff started out as pixel formats for the ADDFB2 ioctl, >>> > i.e. stuff that can be displayed. Hence my first question: How can we >>> > display these bastards here? >>> >>> It's not meant to be displayed. The idea was maybe we could detect the >>> fourcc (e.g. (fourcc & 0xff) == 'T') and reject the buffer accordingly >>> when submitted to one of the display ioctl? >> >> Well we already have explicit lists for all that, so no need to add a pile >> of formats just to be able to reject them ;-) >> >>> > So given all this: Why do we need this in the kernel's header? It sounds >>> > like purely a userspace business with no need at all the enshrine this >>> > into kernel ABI headers. Note that e.g. the mesa import/export interface >>> > have their own fourcc #defines for exactly this reason. >>> >>> I could have stuffed everything in gbm.h for instance, or another new >>> header, but the EXT_dma_buf_import extension actually mentions >>> drm_fourcc.h. So, that's why I finally moved the definitions to there. >>> :) >> >> That's a bit unfortunate ... But the spec also clearly states "as used by >> the drm_mode_fb_cmd2 ioctl". And imo we can't make a case that this is >> true. >> >>> What would be the better place? Can we make the userspace libdrm >>> version of the file live totally unsynchronized from the kernel >>> headers then? >> >> I think the right approach would be to ref the specification and also >> allow other fourcc codes for non-display related buffer layaouts, maybe in >> a different namespace. This entire fourcc stuff was only done since it was >> a somewhat ill-defined "standard" for all kinds of YUV buffers. We've >> already had to massivel pimp it to make it work properly with RGB. >> >> Pimping this even further to support all kinds of random compute/gl >> buffers sounds ill-advised. I think we need to steal a new namespace from >> some existing standard for all this, maybe ogl or ocl has something? Ofc >> that means creating a new dma_buf_import atttribute for eglCreateImageKHR >> which could be used instead of DRM_FOURCC_EXT. > > Thinking further about it, the patch is totally useless. It should be > enough to amend the EXT_image_dma_buf_import spec to allow for using > the GL format/type enums instead... Now, what are the chances to have > the required changes to appear in a new revision of the spec? :) > > I'd suggest the following formalism: > - If EGL_LINUX_DRM_FOURCC_EXT attribute is 0 (zero), then a GL > format/type pair needs to be supplied to the <attrib_list> > - Accepted as an attribute to <attrib_list> would be EGL_GL_FORMAT_EXT > / EGL_GL_TYPE_EXT, where EGL_GL_FORMAT_EXT attribute value would be > GL_{RED,RG,RGB,RGBA} as usual, and EGL_GL_TYPE_EXT value would be > GL_{{UNSIGNED_,}{BYTE,SHORT,INT},{HALF_,}FLOAT}. > > Alternative would be to provide a unique "internal format", but this > would complicate implementations, for sanity checks (too large switch > cases). > > WDYT? Sounds imo sane, but my useful knowledge sharply drops off a steep cliff as soon as we leave the kernel. Pulling in the original authors of the spec. Maybe we can just add this as a revision/clarification ... Iirc Jesse Barker isn't at linaro any more, but I don't have his latest mail. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-03-19 10:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAEDM96guoV3x1TpV7Lo1SUL1MXPG9yOir9Kn9Of5Po9YsVn_=A@mail.gmail.com>
2014-03-14 17:59 ` [PATCH] drm: add FOURCC formats for compute dma_buf interop Gwenole Beauchesne
2014-03-14 21:52 ` Daniel Vetter
2014-03-15 4:41 ` Gwenole Beauchesne
2014-03-15 11:28 ` Daniel Vetter
2014-03-19 6:30 ` Gwenole Beauchesne
2014-03-19 10:31 ` Daniel Vetter
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.