* XFX RX 5600 XT Raw II graphics card slow
@ 2020-05-17 20:51 Javad Karabi
2020-05-17 21:02 ` Javad Karabi
0 siblings, 1 reply; 4+ messages in thread
From: Javad Karabi @ 2020-05-17 20:51 UTC (permalink / raw)
To: amd-gfx
[-- Attachment #1.1: Type: text/plain, Size: 4006 bytes --]
Heres my setup:
kernel: linux-5.6.13
card: XFX RX 5600 XT Raw II (
https://www.bestbuy.com/site/xfx-amd-radeon-rx-5600-xt-raw-ii-pro-6gb-gddr6-pci-express-4-0-graphics-card/6398005.p?skuId=6398005
)
x1 carbon 7th gen -thunderbolt-> Razer Core X -> rx 5600 xt -> hdmi
connection to my monitor (asus mg248)
when i boot into windows, the card works totally fine (installed the radeon
drivers and everything)
when im in linux, the card works, my monitor works, radeontop shows the gpu
being used when i run DRI_PRIME=1 glxgears, etc etc, so it seems that the
card is being properly utilized by everything.
one interesting detail: when i install the kernel, update-initramfs reports
that there is "possibly missing firmware". i dont see any errors in dmesg
about missing firmware so im assuming thats not a problem?
problem is, its very low fps. for example, heres my glxinfo/glxgears output:
$ DRI_PRIME=0 glxgears
3148 frames in 5.0 seconds = 628.420 FPS
1950 frames in 5.0 seconds = 389.999 FPS
^C
$ DRI_PRIME=1 glxgears
755 frames in 5.0 seconds = 150.698 FPS
662 frames in 5.0 seconds = 132.296 FPS
^C
$ DRI_PRIME=0 glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: Intel
$ DRI_PRIME=1 glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
$ dmesg | egrep -i "amdgpu|radeon"
[ 4.798043] amdgpu: unknown parameter 'si_support' ignored
[ 4.802600] amdgpu: unknown parameter 'cik_support' ignored
[ 4.813305] [drm] amdgpu kernel modesetting enabled.
[ 4.813449] amdgpu 0000:0c:00.0: enabling device (0000 -> 0003)
[ 5.051950] amdgpu 0000:0c:00.0: VRAM: 6128M 0x0000008000000000 -
0x000000817EFFFFFF (6128M used)
[ 5.051952] amdgpu 0000:0c:00.0: GART: 512M 0x0000000000000000 -
0x000000001FFFFFFF
[ 5.052081] [drm] amdgpu: 6128M of VRAM memory ready
[ 5.052084] [drm] amdgpu: 6128M of GTT memory ready.
[ 6.125885] amdgpu 0000:0c:00.0: RAS: ras ta ucode is not available
[ 6.131800] amdgpu: [powerplay] use vbios provided pptable
[ 6.131973] amdgpu: [powerplay] smu driver if version = 0x00000033, smu
fw if version = 0x00000035, smu fw version = 0x002a3200 (42.50.0)
[ 6.131979] amdgpu: [powerplay] SMU driver if version not matched
[ 6.176170] amdgpu: [powerplay] SMU is initialized successfully!
[ 6.298473] amdgpu 0000:0c:00.0: fb0: amdgpudrmfb frame buffer device
[ 6.310927] amdgpu 0000:0c:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub
0
[ 6.311158] amdgpu 0000:0c:00.0: ring comp_1.0.0 uses VM inv eng 1 on
hub 0
[ 6.311401] amdgpu 0000:0c:00.0: ring comp_1.1.0 uses VM inv eng 4 on
hub 0
[ 6.311648] amdgpu 0000:0c:00.0: ring comp_1.2.0 uses VM inv eng 5 on
hub 0
[ 6.311904] amdgpu 0000:0c:00.0: ring comp_1.3.0 uses VM inv eng 6 on
hub 0
[ 6.312133] amdgpu 0000:0c:00.0: ring comp_1.0.1 uses VM inv eng 7 on
hub 0
[ 6.312376] amdgpu 0000:0c:00.0: ring comp_1.1.1 uses VM inv eng 8 on
hub 0
[ 6.312619] amdgpu 0000:0c:00.0: ring comp_1.2.1 uses VM inv eng 9 on
hub 0
[ 6.312863] amdgpu 0000:0c:00.0: ring comp_1.3.1 uses VM inv eng 10 on
hub 0
[ 6.313110] amdgpu 0000:0c:00.0: ring kiq_2.1.0 uses VM inv eng 11 on
hub 0
[ 6.313355] amdgpu 0000:0c:00.0: ring sdma0 uses VM inv eng 12 on hub 0
[ 6.313585] amdgpu 0000:0c:00.0: ring sdma1 uses VM inv eng 13 on hub 0
[ 6.313821] amdgpu 0000:0c:00.0: ring vcn_dec uses VM inv eng 0 on hub 1
[ 6.314059] amdgpu 0000:0c:00.0: ring vcn_enc0 uses VM inv eng 1 on hub 1
[ 6.314298] amdgpu 0000:0c:00.0: ring vcn_enc1 uses VM inv eng 4 on hub 1
[ 6.314536] amdgpu 0000:0c:00.0: ring jpeg_dec uses VM inv eng 5 on hub 1
[ 6.316101] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:0c:00.0 on
minor 1
[ 10.797203] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops
amdgpu_dm_audio_component_bind_ops [amdgpu])
is this perhaps a power management issue?
i can include my kernel config and X logs etc if yall need.
[-- Attachment #1.2: Type: text/html, Size: 4708 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: XFX RX 5600 XT Raw II graphics card slow
2020-05-17 20:51 XFX RX 5600 XT Raw II graphics card slow Javad Karabi
@ 2020-05-17 21:02 ` Javad Karabi
2020-05-17 21:25 ` Javad Karabi
0 siblings, 1 reply; 4+ messages in thread
From: Javad Karabi @ 2020-05-17 21:02 UTC (permalink / raw)
To: amd-gfx
[-- Attachment #1.1: Type: text/plain, Size: 4960 bytes --]
oh, i also flashed the card bios with the bios provided at:
https://www.xfxforce.com/gpus/xfx-amd-radeon-tm-rx-5600-xt-6gb-gddr6-raw-ii
if you scroll down a bit and click on downloads, they have a link to a
"performance bios". i flashed that, and nothing changed. after the flash,
the card still worked great in windows, and still terrible in linux. so i
guess that flash didnt change anything.
also, fyi i do have the latest linux-firmware installed (since apparently
there was some issue with the firmware for the rx 5600 which was solved in
the latest firmware i guess)
$ md5sum /lib/firmware/amdgpu/navi10_smc.bin
632de739379e484c0233f6808cba2c7f /lib/firmware/amdgpu/navi10_smc.bin
On Sun, May 17, 2020 at 3:51 PM Javad Karabi <karabijavad@gmail.com> wrote:
> Heres my setup:
>
> kernel: linux-5.6.13
> card: XFX RX 5600 XT Raw II (
> https://www.bestbuy.com/site/xfx-amd-radeon-rx-5600-xt-raw-ii-pro-6gb-gddr6-pci-express-4-0-graphics-card/6398005.p?skuId=6398005
> )
>
> x1 carbon 7th gen -thunderbolt-> Razer Core X -> rx 5600 xt -> hdmi
> connection to my monitor (asus mg248)
>
> when i boot into windows, the card works totally fine (installed the
> radeon drivers and everything)
>
> when im in linux, the card works, my monitor works, radeontop shows the
> gpu being used when i run DRI_PRIME=1 glxgears, etc etc, so it seems that
> the card is being properly utilized by everything.
>
> one interesting detail: when i install the kernel, update-initramfs
> reports that there is "possibly missing firmware". i dont see any errors in
> dmesg about missing firmware so im assuming thats not a problem?
>
> problem is, its very low fps. for example, heres my glxinfo/glxgears
> output:
>
> $ DRI_PRIME=0 glxgears
> 3148 frames in 5.0 seconds = 628.420 FPS
> 1950 frames in 5.0 seconds = 389.999 FPS
> ^C
> $ DRI_PRIME=1 glxgears
> 755 frames in 5.0 seconds = 150.698 FPS
> 662 frames in 5.0 seconds = 132.296 FPS
> ^C
> $ DRI_PRIME=0 glxinfo | grep vendor
> server glx vendor string: SGI
> client glx vendor string: Mesa Project and SGI
> OpenGL vendor string: Intel
> $ DRI_PRIME=1 glxinfo | grep vendor
> server glx vendor string: SGI
> client glx vendor string: Mesa Project and SGI
> OpenGL vendor string: X.Org
>
> $ dmesg | egrep -i "amdgpu|radeon"
> [ 4.798043] amdgpu: unknown parameter 'si_support' ignored
> [ 4.802600] amdgpu: unknown parameter 'cik_support' ignored
> [ 4.813305] [drm] amdgpu kernel modesetting enabled.
> [ 4.813449] amdgpu 0000:0c:00.0: enabling device (0000 -> 0003)
> [ 5.051950] amdgpu 0000:0c:00.0: VRAM: 6128M 0x0000008000000000 -
> 0x000000817EFFFFFF (6128M used)
> [ 5.051952] amdgpu 0000:0c:00.0: GART: 512M 0x0000000000000000 -
> 0x000000001FFFFFFF
> [ 5.052081] [drm] amdgpu: 6128M of VRAM memory ready
> [ 5.052084] [drm] amdgpu: 6128M of GTT memory ready.
> [ 6.125885] amdgpu 0000:0c:00.0: RAS: ras ta ucode is not available
> [ 6.131800] amdgpu: [powerplay] use vbios provided pptable
> [ 6.131973] amdgpu: [powerplay] smu driver if version = 0x00000033, smu
> fw if version = 0x00000035, smu fw version = 0x002a3200 (42.50.0)
> [ 6.131979] amdgpu: [powerplay] SMU driver if version not matched
> [ 6.176170] amdgpu: [powerplay] SMU is initialized successfully!
> [ 6.298473] amdgpu 0000:0c:00.0: fb0: amdgpudrmfb frame buffer device
> [ 6.310927] amdgpu 0000:0c:00.0: ring gfx_0.0.0 uses VM inv eng 0 on
> hub 0
> [ 6.311158] amdgpu 0000:0c:00.0: ring comp_1.0.0 uses VM inv eng 1 on
> hub 0
> [ 6.311401] amdgpu 0000:0c:00.0: ring comp_1.1.0 uses VM inv eng 4 on
> hub 0
> [ 6.311648] amdgpu 0000:0c:00.0: ring comp_1.2.0 uses VM inv eng 5 on
> hub 0
> [ 6.311904] amdgpu 0000:0c:00.0: ring comp_1.3.0 uses VM inv eng 6 on
> hub 0
> [ 6.312133] amdgpu 0000:0c:00.0: ring comp_1.0.1 uses VM inv eng 7 on
> hub 0
> [ 6.312376] amdgpu 0000:0c:00.0: ring comp_1.1.1 uses VM inv eng 8 on
> hub 0
> [ 6.312619] amdgpu 0000:0c:00.0: ring comp_1.2.1 uses VM inv eng 9 on
> hub 0
> [ 6.312863] amdgpu 0000:0c:00.0: ring comp_1.3.1 uses VM inv eng 10 on
> hub 0
> [ 6.313110] amdgpu 0000:0c:00.0: ring kiq_2.1.0 uses VM inv eng 11 on
> hub 0
> [ 6.313355] amdgpu 0000:0c:00.0: ring sdma0 uses VM inv eng 12 on hub 0
> [ 6.313585] amdgpu 0000:0c:00.0: ring sdma1 uses VM inv eng 13 on hub 0
> [ 6.313821] amdgpu 0000:0c:00.0: ring vcn_dec uses VM inv eng 0 on hub 1
> [ 6.314059] amdgpu 0000:0c:00.0: ring vcn_enc0 uses VM inv eng 1 on hub
> 1
> [ 6.314298] amdgpu 0000:0c:00.0: ring vcn_enc1 uses VM inv eng 4 on hub
> 1
> [ 6.314536] amdgpu 0000:0c:00.0: ring jpeg_dec uses VM inv eng 5 on hub
> 1
> [ 6.316101] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:0c:00.0
> on minor 1
> [ 10.797203] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops
> amdgpu_dm_audio_component_bind_ops [amdgpu])
>
> is this perhaps a power management issue?
> i can include my kernel config and X logs etc if yall need.
>
>
[-- Attachment #1.2: Type: text/html, Size: 5966 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: XFX RX 5600 XT Raw II graphics card slow
2020-05-17 21:02 ` Javad Karabi
@ 2020-05-17 21:25 ` Javad Karabi
2020-05-18 13:51 ` Alex Deucher
0 siblings, 1 reply; 4+ messages in thread
From: Javad Karabi @ 2020-05-17 21:25 UTC (permalink / raw)
To: amd-gfx
hmm, actually upon digging deeper, it looks like the latest
linux-firmware doesnt have navi10_mes.bin.
if i understand correctly, the rx 5600 xt is navi10, right?
navi10_mes.bin is one of the firmware files that update-initramfs is
saying is missing.
is there any way i can get my hands on navi10_mes.bin?
On Sun, May 17, 2020 at 4:02 PM Javad Karabi <karabijavad@gmail.com> wrote:
>
> oh, i also flashed the card bios with the bios provided at:
> https://www.xfxforce.com/gpus/xfx-amd-radeon-tm-rx-5600-xt-6gb-gddr6-raw-ii
>
> if you scroll down a bit and click on downloads, they have a link to a "performance bios". i flashed that, and nothing changed. after the flash, the card still worked great in windows, and still terrible in linux. so i guess that flash didnt change anything.
>
> also, fyi i do have the latest linux-firmware installed (since apparently there was some issue with the firmware for the rx 5600 which was solved in the latest firmware i guess)
>
> $ md5sum /lib/firmware/amdgpu/navi10_smc.bin
> 632de739379e484c0233f6808cba2c7f /lib/firmware/amdgpu/navi10_smc.bin
>
> On Sun, May 17, 2020 at 3:51 PM Javad Karabi <karabijavad@gmail.com> wrote:
>>
>> Heres my setup:
>>
>> kernel: linux-5.6.13
>> card: XFX RX 5600 XT Raw II (https://www.bestbuy.com/site/xfx-amd-radeon-rx-5600-xt-raw-ii-pro-6gb-gddr6-pci-express-4-0-graphics-card/6398005.p?skuId=6398005)
>>
>> x1 carbon 7th gen -thunderbolt-> Razer Core X -> rx 5600 xt -> hdmi connection to my monitor (asus mg248)
>>
>> when i boot into windows, the card works totally fine (installed the radeon drivers and everything)
>>
>> when im in linux, the card works, my monitor works, radeontop shows the gpu being used when i run DRI_PRIME=1 glxgears, etc etc, so it seems that the card is being properly utilized by everything.
>>
>> one interesting detail: when i install the kernel, update-initramfs reports that there is "possibly missing firmware". i dont see any errors in dmesg about missing firmware so im assuming thats not a problem?
>>
>> problem is, its very low fps. for example, heres my glxinfo/glxgears output:
>>
>> $ DRI_PRIME=0 glxgears
>> 3148 frames in 5.0 seconds = 628.420 FPS
>> 1950 frames in 5.0 seconds = 389.999 FPS
>> ^C
>> $ DRI_PRIME=1 glxgears
>> 755 frames in 5.0 seconds = 150.698 FPS
>> 662 frames in 5.0 seconds = 132.296 FPS
>> ^C
>> $ DRI_PRIME=0 glxinfo | grep vendor
>> server glx vendor string: SGI
>> client glx vendor string: Mesa Project and SGI
>> OpenGL vendor string: Intel
>> $ DRI_PRIME=1 glxinfo | grep vendor
>> server glx vendor string: SGI
>> client glx vendor string: Mesa Project and SGI
>> OpenGL vendor string: X.Org
>>
>> $ dmesg | egrep -i "amdgpu|radeon"
>> [ 4.798043] amdgpu: unknown parameter 'si_support' ignored
>> [ 4.802600] amdgpu: unknown parameter 'cik_support' ignored
>> [ 4.813305] [drm] amdgpu kernel modesetting enabled.
>> [ 4.813449] amdgpu 0000:0c:00.0: enabling device (0000 -> 0003)
>> [ 5.051950] amdgpu 0000:0c:00.0: VRAM: 6128M 0x0000008000000000 - 0x000000817EFFFFFF (6128M used)
>> [ 5.051952] amdgpu 0000:0c:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
>> [ 5.052081] [drm] amdgpu: 6128M of VRAM memory ready
>> [ 5.052084] [drm] amdgpu: 6128M of GTT memory ready.
>> [ 6.125885] amdgpu 0000:0c:00.0: RAS: ras ta ucode is not available
>> [ 6.131800] amdgpu: [powerplay] use vbios provided pptable
>> [ 6.131973] amdgpu: [powerplay] smu driver if version = 0x00000033, smu fw if version = 0x00000035, smu fw version = 0x002a3200 (42.50.0)
>> [ 6.131979] amdgpu: [powerplay] SMU driver if version not matched
>> [ 6.176170] amdgpu: [powerplay] SMU is initialized successfully!
>> [ 6.298473] amdgpu 0000:0c:00.0: fb0: amdgpudrmfb frame buffer device
>> [ 6.310927] amdgpu 0000:0c:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
>> [ 6.311158] amdgpu 0000:0c:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
>> [ 6.311401] amdgpu 0000:0c:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
>> [ 6.311648] amdgpu 0000:0c:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
>> [ 6.311904] amdgpu 0000:0c:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
>> [ 6.312133] amdgpu 0000:0c:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
>> [ 6.312376] amdgpu 0000:0c:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
>> [ 6.312619] amdgpu 0000:0c:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
>> [ 6.312863] amdgpu 0000:0c:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
>> [ 6.313110] amdgpu 0000:0c:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
>> [ 6.313355] amdgpu 0000:0c:00.0: ring sdma0 uses VM inv eng 12 on hub 0
>> [ 6.313585] amdgpu 0000:0c:00.0: ring sdma1 uses VM inv eng 13 on hub 0
>> [ 6.313821] amdgpu 0000:0c:00.0: ring vcn_dec uses VM inv eng 0 on hub 1
>> [ 6.314059] amdgpu 0000:0c:00.0: ring vcn_enc0 uses VM inv eng 1 on hub 1
>> [ 6.314298] amdgpu 0000:0c:00.0: ring vcn_enc1 uses VM inv eng 4 on hub 1
>> [ 6.314536] amdgpu 0000:0c:00.0: ring jpeg_dec uses VM inv eng 5 on hub 1
>> [ 6.316101] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:0c:00.0 on minor 1
>> [ 10.797203] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
>>
>> is this perhaps a power management issue?
>> i can include my kernel config and X logs etc if yall need.
>>
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: XFX RX 5600 XT Raw II graphics card slow
2020-05-17 21:25 ` Javad Karabi
@ 2020-05-18 13:51 ` Alex Deucher
0 siblings, 0 replies; 4+ messages in thread
From: Alex Deucher @ 2020-05-18 13:51 UTC (permalink / raw)
To: Javad Karabi; +Cc: amd-gfx list
On Sun, May 17, 2020 at 5:25 PM Javad Karabi <karabijavad@gmail.com> wrote:
>
> hmm, actually upon digging deeper, it looks like the latest
> linux-firmware doesnt have navi10_mes.bin.
> if i understand correctly, the rx 5600 xt is navi10, right?
> navi10_mes.bin is one of the firmware files that update-initramfs is
> saying is missing.
>
> is there any way i can get my hands on navi10_mes.bin?
It's an optional firmware that is not used by the driver at this
point. You can ignore it.
Alex
>
>
> On Sun, May 17, 2020 at 4:02 PM Javad Karabi <karabijavad@gmail.com> wrote:
> >
> > oh, i also flashed the card bios with the bios provided at:
> > https://www.xfxforce.com/gpus/xfx-amd-radeon-tm-rx-5600-xt-6gb-gddr6-raw-ii
> >
> > if you scroll down a bit and click on downloads, they have a link to a "performance bios". i flashed that, and nothing changed. after the flash, the card still worked great in windows, and still terrible in linux. so i guess that flash didnt change anything.
> >
> > also, fyi i do have the latest linux-firmware installed (since apparently there was some issue with the firmware for the rx 5600 which was solved in the latest firmware i guess)
> >
> > $ md5sum /lib/firmware/amdgpu/navi10_smc.bin
> > 632de739379e484c0233f6808cba2c7f /lib/firmware/amdgpu/navi10_smc.bin
> >
> > On Sun, May 17, 2020 at 3:51 PM Javad Karabi <karabijavad@gmail.com> wrote:
> >>
> >> Heres my setup:
> >>
> >> kernel: linux-5.6.13
> >> card: XFX RX 5600 XT Raw II (https://www.bestbuy.com/site/xfx-amd-radeon-rx-5600-xt-raw-ii-pro-6gb-gddr6-pci-express-4-0-graphics-card/6398005.p?skuId=6398005)
> >>
> >> x1 carbon 7th gen -thunderbolt-> Razer Core X -> rx 5600 xt -> hdmi connection to my monitor (asus mg248)
> >>
> >> when i boot into windows, the card works totally fine (installed the radeon drivers and everything)
> >>
> >> when im in linux, the card works, my monitor works, radeontop shows the gpu being used when i run DRI_PRIME=1 glxgears, etc etc, so it seems that the card is being properly utilized by everything.
> >>
> >> one interesting detail: when i install the kernel, update-initramfs reports that there is "possibly missing firmware". i dont see any errors in dmesg about missing firmware so im assuming thats not a problem?
> >>
> >> problem is, its very low fps. for example, heres my glxinfo/glxgears output:
> >>
> >> $ DRI_PRIME=0 glxgears
> >> 3148 frames in 5.0 seconds = 628.420 FPS
> >> 1950 frames in 5.0 seconds = 389.999 FPS
> >> ^C
> >> $ DRI_PRIME=1 glxgears
> >> 755 frames in 5.0 seconds = 150.698 FPS
> >> 662 frames in 5.0 seconds = 132.296 FPS
> >> ^C
> >> $ DRI_PRIME=0 glxinfo | grep vendor
> >> server glx vendor string: SGI
> >> client glx vendor string: Mesa Project and SGI
> >> OpenGL vendor string: Intel
> >> $ DRI_PRIME=1 glxinfo | grep vendor
> >> server glx vendor string: SGI
> >> client glx vendor string: Mesa Project and SGI
> >> OpenGL vendor string: X.Org
> >>
> >> $ dmesg | egrep -i "amdgpu|radeon"
> >> [ 4.798043] amdgpu: unknown parameter 'si_support' ignored
> >> [ 4.802600] amdgpu: unknown parameter 'cik_support' ignored
> >> [ 4.813305] [drm] amdgpu kernel modesetting enabled.
> >> [ 4.813449] amdgpu 0000:0c:00.0: enabling device (0000 -> 0003)
> >> [ 5.051950] amdgpu 0000:0c:00.0: VRAM: 6128M 0x0000008000000000 - 0x000000817EFFFFFF (6128M used)
> >> [ 5.051952] amdgpu 0000:0c:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
> >> [ 5.052081] [drm] amdgpu: 6128M of VRAM memory ready
> >> [ 5.052084] [drm] amdgpu: 6128M of GTT memory ready.
> >> [ 6.125885] amdgpu 0000:0c:00.0: RAS: ras ta ucode is not available
> >> [ 6.131800] amdgpu: [powerplay] use vbios provided pptable
> >> [ 6.131973] amdgpu: [powerplay] smu driver if version = 0x00000033, smu fw if version = 0x00000035, smu fw version = 0x002a3200 (42.50.0)
> >> [ 6.131979] amdgpu: [powerplay] SMU driver if version not matched
> >> [ 6.176170] amdgpu: [powerplay] SMU is initialized successfully!
> >> [ 6.298473] amdgpu 0000:0c:00.0: fb0: amdgpudrmfb frame buffer device
> >> [ 6.310927] amdgpu 0000:0c:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
> >> [ 6.311158] amdgpu 0000:0c:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
> >> [ 6.311401] amdgpu 0000:0c:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
> >> [ 6.311648] amdgpu 0000:0c:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
> >> [ 6.311904] amdgpu 0000:0c:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
> >> [ 6.312133] amdgpu 0000:0c:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
> >> [ 6.312376] amdgpu 0000:0c:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
> >> [ 6.312619] amdgpu 0000:0c:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
> >> [ 6.312863] amdgpu 0000:0c:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
> >> [ 6.313110] amdgpu 0000:0c:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
> >> [ 6.313355] amdgpu 0000:0c:00.0: ring sdma0 uses VM inv eng 12 on hub 0
> >> [ 6.313585] amdgpu 0000:0c:00.0: ring sdma1 uses VM inv eng 13 on hub 0
> >> [ 6.313821] amdgpu 0000:0c:00.0: ring vcn_dec uses VM inv eng 0 on hub 1
> >> [ 6.314059] amdgpu 0000:0c:00.0: ring vcn_enc0 uses VM inv eng 1 on hub 1
> >> [ 6.314298] amdgpu 0000:0c:00.0: ring vcn_enc1 uses VM inv eng 4 on hub 1
> >> [ 6.314536] amdgpu 0000:0c:00.0: ring jpeg_dec uses VM inv eng 5 on hub 1
> >> [ 6.316101] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:0c:00.0 on minor 1
> >> [ 10.797203] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
> >>
> >> is this perhaps a power management issue?
> >> i can include my kernel config and X logs etc if yall need.
> >>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-05-18 13:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-17 20:51 XFX RX 5600 XT Raw II graphics card slow Javad Karabi
2020-05-17 21:02 ` Javad Karabi
2020-05-17 21:25 ` Javad Karabi
2020-05-18 13:51 ` Alex Deucher
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.