* [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 23:36 ` David Gibson
2021-05-14 3:02 ` Bin Meng
2021-05-13 16:38 ` [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV Philippe Mathieu-Daudé
` (9 subsequent siblings)
10 siblings, 2 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, open list:ARM TCG CPUs,
open list:PowerPC TCG CPUs, Igor Mammedov, Paolo Bonzini,
Philippe Mathieu-Daudé,
David Gibson
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device (it is certainly possible
to start a machine without NVDIMM) , so use the 'imply' weak
reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
default-configs/devices/ppc64-softmmu.mak | 1 -
hw/arm/Kconfig | 1 +
hw/i386/Kconfig | 1 +
hw/mem/Kconfig | 2 --
hw/ppc/Kconfig | 1 +
5 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
index ae0841fa3a1..cca52665d90 100644
--- a/default-configs/devices/ppc64-softmmu.mak
+++ b/default-configs/devices/ppc64-softmmu.mak
@@ -8,4 +8,3 @@ CONFIG_POWERNV=y
# For pSeries
CONFIG_PSERIES=y
-CONFIG_NVDIMM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index b887f6a5b17..67723d9ea6a 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -6,6 +6,7 @@ config ARM_VIRT
imply VFIO_PLATFORM
imply VFIO_XGMAC
imply TPM_TIS_SYSBUS
+ imply NVDIMM
select ARM_GIC
select ACPI
select ARM_SMMUV3
diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
index 7f91f30877f..66838fa397b 100644
--- a/hw/i386/Kconfig
+++ b/hw/i386/Kconfig
@@ -23,6 +23,7 @@ config PC
imply TPM_TIS_ISA
imply VGA_PCI
imply VIRTIO_VGA
+ imply NVDIMM
select FDC
select I8259
select I8254
diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
index a0ef2cf648e..8b19fdc49f1 100644
--- a/hw/mem/Kconfig
+++ b/hw/mem/Kconfig
@@ -7,6 +7,4 @@ config MEM_DEVICE
config NVDIMM
bool
- default y
- depends on (PC || PSERIES || ARM_VIRT)
select MEM_DEVICE
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index e51e0e5e5ac..66e0b15d9ef 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -3,6 +3,7 @@ config PSERIES
imply PCI_DEVICES
imply TEST_DEVICES
imply VIRTIO_VGA
+ imply NVDIMM
select DIMM
select PCI
select SPAPR_VSCSI
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-13 16:38 ` [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on' Philippe Mathieu-Daudé
@ 2021-05-13 23:36 ` David Gibson
2021-05-14 3:02 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: David Gibson @ 2021-05-13 23:36 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, qemu-devel, Greg Kurz, open list:ARM TCG CPUs,
open list:PowerPC TCG CPUs, Igor Mammedov, Paolo Bonzini
[-- Attachment #1: Type: text/plain, Size: 2735 bytes --]
On Thu, May 13, 2021 at 06:38:49PM +0200, Philippe Mathieu-Daudé wrote:
> Per the kconfig.rst:
>
> A device should be listed [...] ``imply`` if (depending on
> the QEMU command line) the board may or may not be started
> without it.
>
> This is the case with the NVDIMM device (it is certainly possible
> to start a machine without NVDIMM) , so use the 'imply' weak
> reverse dependency to select the symbol.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
ppc part
Acked-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> default-configs/devices/ppc64-softmmu.mak | 1 -
> hw/arm/Kconfig | 1 +
> hw/i386/Kconfig | 1 +
> hw/mem/Kconfig | 2 --
> hw/ppc/Kconfig | 1 +
> 5 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
> index ae0841fa3a1..cca52665d90 100644
> --- a/default-configs/devices/ppc64-softmmu.mak
> +++ b/default-configs/devices/ppc64-softmmu.mak
> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
>
> # For pSeries
> CONFIG_PSERIES=y
> -CONFIG_NVDIMM=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index b887f6a5b17..67723d9ea6a 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -6,6 +6,7 @@ config ARM_VIRT
> imply VFIO_PLATFORM
> imply VFIO_XGMAC
> imply TPM_TIS_SYSBUS
> + imply NVDIMM
> select ARM_GIC
> select ACPI
> select ARM_SMMUV3
> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
> index 7f91f30877f..66838fa397b 100644
> --- a/hw/i386/Kconfig
> +++ b/hw/i386/Kconfig
> @@ -23,6 +23,7 @@ config PC
> imply TPM_TIS_ISA
> imply VGA_PCI
> imply VIRTIO_VGA
> + imply NVDIMM
> select FDC
> select I8259
> select I8254
> diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
> index a0ef2cf648e..8b19fdc49f1 100644
> --- a/hw/mem/Kconfig
> +++ b/hw/mem/Kconfig
> @@ -7,6 +7,4 @@ config MEM_DEVICE
>
> config NVDIMM
> bool
> - default y
> - depends on (PC || PSERIES || ARM_VIRT)
> select MEM_DEVICE
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index e51e0e5e5ac..66e0b15d9ef 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -3,6 +3,7 @@ config PSERIES
> imply PCI_DEVICES
> imply TEST_DEVICES
> imply VIRTIO_VGA
> + imply NVDIMM
> select DIMM
> select PCI
> select SPAPR_VSCSI
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-13 16:38 ` [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on' Philippe Mathieu-Daudé
2021-05-13 23:36 ` David Gibson
@ 2021-05-14 3:02 ` Bin Meng
2021-05-15 17:33 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 39+ messages in thread
From: Bin Meng @ 2021-05-14 3:02 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, qemu-devel@nongnu.org Developers,
open list:ARM TCG CPUs, open list:PowerPC TCG CPUs,
Paolo Bonzini, Igor Mammedov, David Gibson
On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Per the kconfig.rst:
>
> A device should be listed [...] ``imply`` if (depending on
> the QEMU command line) the board may or may not be started
> without it.
>
> This is the case with the NVDIMM device (it is certainly possible
> to start a machine without NVDIMM) , so use the 'imply' weak
> reverse dependency to select the symbol.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> default-configs/devices/ppc64-softmmu.mak | 1 -
> hw/arm/Kconfig | 1 +
> hw/i386/Kconfig | 1 +
> hw/mem/Kconfig | 2 --
> hw/ppc/Kconfig | 1 +
> 5 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
> index ae0841fa3a1..cca52665d90 100644
> --- a/default-configs/devices/ppc64-softmmu.mak
> +++ b/default-configs/devices/ppc64-softmmu.mak
> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
>
> # For pSeries
> CONFIG_PSERIES=y
> -CONFIG_NVDIMM=y
I think only removing this one makes sense. I fail to see any
difference of other changes in this patch.
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index b887f6a5b17..67723d9ea6a 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -6,6 +6,7 @@ config ARM_VIRT
> imply VFIO_PLATFORM
> imply VFIO_XGMAC
> imply TPM_TIS_SYSBUS
> + imply NVDIMM
> select ARM_GIC
> select ACPI
> select ARM_SMMUV3
> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
> index 7f91f30877f..66838fa397b 100644
> --- a/hw/i386/Kconfig
> +++ b/hw/i386/Kconfig
> @@ -23,6 +23,7 @@ config PC
> imply TPM_TIS_ISA
> imply VGA_PCI
> imply VIRTIO_VGA
> + imply NVDIMM
> select FDC
> select I8259
> select I8254
> diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
> index a0ef2cf648e..8b19fdc49f1 100644
> --- a/hw/mem/Kconfig
> +++ b/hw/mem/Kconfig
> @@ -7,6 +7,4 @@ config MEM_DEVICE
>
> config NVDIMM
> bool
> - default y
> - depends on (PC || PSERIES || ARM_VIRT)
> select MEM_DEVICE
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index e51e0e5e5ac..66e0b15d9ef 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -3,6 +3,7 @@ config PSERIES
> imply PCI_DEVICES
> imply TEST_DEVICES
> imply VIRTIO_VGA
> + imply NVDIMM
> select DIMM
> select PCI
> select SPAPR_VSCSI
Regards,
Bin
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-14 3:02 ` Bin Meng
@ 2021-05-15 17:33 ` Philippe Mathieu-Daudé
2021-05-16 0:50 ` Bin Meng
0 siblings, 1 reply; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-15 17:33 UTC (permalink / raw)
To: Bin Meng
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, qemu-devel@nongnu.org Developers,
open list:ARM TCG CPUs, open list:PowerPC TCG CPUs,
Paolo Bonzini, Igor Mammedov, David Gibson
On 5/14/21 5:02 AM, Bin Meng wrote:
> On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
>>
>> Per the kconfig.rst:
>>
>> A device should be listed [...] ``imply`` if (depending on
>> the QEMU command line) the board may or may not be started
>> without it.
>>
>> This is the case with the NVDIMM device (it is certainly possible
>> to start a machine without NVDIMM) , so use the 'imply' weak
>> reverse dependency to select the symbol.
>>
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>> default-configs/devices/ppc64-softmmu.mak | 1 -
>> hw/arm/Kconfig | 1 +
>> hw/i386/Kconfig | 1 +
>> hw/mem/Kconfig | 2 --
>> hw/ppc/Kconfig | 1 +
>> 5 files changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
>> index ae0841fa3a1..cca52665d90 100644
>> --- a/default-configs/devices/ppc64-softmmu.mak
>> +++ b/default-configs/devices/ppc64-softmmu.mak
>> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
>>
>> # For pSeries
>> CONFIG_PSERIES=y
>> -CONFIG_NVDIMM=y
>
> I think only removing this one makes sense. I fail to see any
> difference of other changes in this patch.
See below "depends on (PC || PSERIES || ARM_VIRT)"
>
>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>> index b887f6a5b17..67723d9ea6a 100644
>> --- a/hw/arm/Kconfig
>> +++ b/hw/arm/Kconfig
>> @@ -6,6 +6,7 @@ config ARM_VIRT
>> imply VFIO_PLATFORM
>> imply VFIO_XGMAC
>> imply TPM_TIS_SYSBUS
>> + imply NVDIMM
>> select ARM_GIC
>> select ACPI
>> select ARM_SMMUV3
>> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
>> index 7f91f30877f..66838fa397b 100644
>> --- a/hw/i386/Kconfig
>> +++ b/hw/i386/Kconfig
>> @@ -23,6 +23,7 @@ config PC
>> imply TPM_TIS_ISA
>> imply VGA_PCI
>> imply VIRTIO_VGA
>> + imply NVDIMM
>> select FDC
>> select I8259
>> select I8254
>> diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
>> index a0ef2cf648e..8b19fdc49f1 100644
>> --- a/hw/mem/Kconfig
>> +++ b/hw/mem/Kconfig
>> @@ -7,6 +7,4 @@ config MEM_DEVICE
>>
>> config NVDIMM
>> bool
>> - default y
>> - depends on (PC || PSERIES || ARM_VIRT)
>> select MEM_DEVICE
>> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
>> index e51e0e5e5ac..66e0b15d9ef 100644
>> --- a/hw/ppc/Kconfig
>> +++ b/hw/ppc/Kconfig
>> @@ -3,6 +3,7 @@ config PSERIES
>> imply PCI_DEVICES
>> imply TEST_DEVICES
>> imply VIRTIO_VGA
>> + imply NVDIMM
>> select DIMM
>> select PCI
>> select SPAPR_VSCSI
>
> Regards,
> Bin
>
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-15 17:33 ` Philippe Mathieu-Daudé
@ 2021-05-16 0:50 ` Bin Meng
2021-05-16 12:42 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 39+ messages in thread
From: Bin Meng @ 2021-05-16 0:50 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, qemu-devel@nongnu.org Developers,
open list:ARM TCG CPUs, open list:PowerPC TCG CPUs,
Paolo Bonzini, Igor Mammedov, David Gibson
On Sun, May 16, 2021 at 1:33 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 5/14/21 5:02 AM, Bin Meng wrote:
> > On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
> > <philmd@redhat.com> wrote:
> >>
> >> Per the kconfig.rst:
> >>
> >> A device should be listed [...] ``imply`` if (depending on
> >> the QEMU command line) the board may or may not be started
> >> without it.
> >>
> >> This is the case with the NVDIMM device (it is certainly possible
> >> to start a machine without NVDIMM) , so use the 'imply' weak
> >> reverse dependency to select the symbol.
> >>
> >> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> >> ---
> >> default-configs/devices/ppc64-softmmu.mak | 1 -
> >> hw/arm/Kconfig | 1 +
> >> hw/i386/Kconfig | 1 +
> >> hw/mem/Kconfig | 2 --
> >> hw/ppc/Kconfig | 1 +
> >> 5 files changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
> >> index ae0841fa3a1..cca52665d90 100644
> >> --- a/default-configs/devices/ppc64-softmmu.mak
> >> +++ b/default-configs/devices/ppc64-softmmu.mak
> >> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
> >>
> >> # For pSeries
> >> CONFIG_PSERIES=y
> >> -CONFIG_NVDIMM=y
> >
> > I think only removing this one makes sense. I fail to see any
> > difference of other changes in this patch.
>
> See below "depends on (PC || PSERIES || ARM_VIRT)"
Yes, I saw that. This change does not make any difference compared to
"depends on"
>
> >
> >> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> >> index b887f6a5b17..67723d9ea6a 100644
> >> --- a/hw/arm/Kconfig
> >> +++ b/hw/arm/Kconfig
> >> @@ -6,6 +6,7 @@ config ARM_VIRT
> >> imply VFIO_PLATFORM
> >> imply VFIO_XGMAC
> >> imply TPM_TIS_SYSBUS
> >> + imply NVDIMM
> >> select ARM_GIC
> >> select ACPI
> >> select ARM_SMMUV3
> >> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
> >> index 7f91f30877f..66838fa397b 100644
> >> --- a/hw/i386/Kconfig
> >> +++ b/hw/i386/Kconfig
> >> @@ -23,6 +23,7 @@ config PC
> >> imply TPM_TIS_ISA
> >> imply VGA_PCI
> >> imply VIRTIO_VGA
> >> + imply NVDIMM
> >> select FDC
> >> select I8259
> >> select I8254
> >> diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
> >> index a0ef2cf648e..8b19fdc49f1 100644
> >> --- a/hw/mem/Kconfig
> >> +++ b/hw/mem/Kconfig
> >> @@ -7,6 +7,4 @@ config MEM_DEVICE
> >>
> >> config NVDIMM
> >> bool
> >> - default y
> >> - depends on (PC || PSERIES || ARM_VIRT)
> >> select MEM_DEVICE
> >> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> >> index e51e0e5e5ac..66e0b15d9ef 100644
> >> --- a/hw/ppc/Kconfig
> >> +++ b/hw/ppc/Kconfig
> >> @@ -3,6 +3,7 @@ config PSERIES
> >> imply PCI_DEVICES
> >> imply TEST_DEVICES
> >> imply VIRTIO_VGA
> >> + imply NVDIMM
> >> select DIMM
> >> select PCI
> >> select SPAPR_VSCSI
Regards,
Bin
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-16 0:50 ` Bin Meng
@ 2021-05-16 12:42 ` Philippe Mathieu-Daudé
2021-05-16 14:15 ` Bin Meng
0 siblings, 1 reply; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-16 12:42 UTC (permalink / raw)
To: Bin Meng
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, qemu-devel@nongnu.org Developers,
open list:ARM TCG CPUs, open list:PowerPC TCG CPUs,
Paolo Bonzini, Igor Mammedov, David Gibson
On 5/16/21 2:50 AM, Bin Meng wrote:
> On Sun, May 16, 2021 at 1:33 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
>>
>> On 5/14/21 5:02 AM, Bin Meng wrote:
>>> On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
>>> <philmd@redhat.com> wrote:
>>>>
>>>> Per the kconfig.rst:
>>>>
>>>> A device should be listed [...] ``imply`` if (depending on
>>>> the QEMU command line) the board may or may not be started
>>>> without it.
>>>>
>>>> This is the case with the NVDIMM device (it is certainly possible
>>>> to start a machine without NVDIMM) , so use the 'imply' weak
>>>> reverse dependency to select the symbol.
>>>>
>>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>>> ---
>>>> default-configs/devices/ppc64-softmmu.mak | 1 -
>>>> hw/arm/Kconfig | 1 +
>>>> hw/i386/Kconfig | 1 +
>>>> hw/mem/Kconfig | 2 --
>>>> hw/ppc/Kconfig | 1 +
>>>> 5 files changed, 3 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
>>>> index ae0841fa3a1..cca52665d90 100644
>>>> --- a/default-configs/devices/ppc64-softmmu.mak
>>>> +++ b/default-configs/devices/ppc64-softmmu.mak
>>>> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
>>>>
>>>> # For pSeries
>>>> CONFIG_PSERIES=y
>>>> -CONFIG_NVDIMM=y
>>>
>>> I think only removing this one makes sense. I fail to see any
>>> difference of other changes in this patch.
>>
>> See below "depends on (PC || PSERIES || ARM_VIRT)"
>
> Yes, I saw that. This change does not make any difference compared to
> "depends on"
No, there is no logical change indeed. Simply IIUC the documentation
"imply" is the preferred form.
>
>>
>>>
>>>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>>>> index b887f6a5b17..67723d9ea6a 100644
>>>> --- a/hw/arm/Kconfig
>>>> +++ b/hw/arm/Kconfig
>>>> @@ -6,6 +6,7 @@ config ARM_VIRT
>>>> imply VFIO_PLATFORM
>>>> imply VFIO_XGMAC
>>>> imply TPM_TIS_SYSBUS
>>>> + imply NVDIMM
>>>> select ARM_GIC
>>>> select ACPI
>>>> select ARM_SMMUV3
>>>> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
>>>> index 7f91f30877f..66838fa397b 100644
>>>> --- a/hw/i386/Kconfig
>>>> +++ b/hw/i386/Kconfig
>>>> @@ -23,6 +23,7 @@ config PC
>>>> imply TPM_TIS_ISA
>>>> imply VGA_PCI
>>>> imply VIRTIO_VGA
>>>> + imply NVDIMM
>>>> select FDC
>>>> select I8259
>>>> select I8254
>>>> diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
>>>> index a0ef2cf648e..8b19fdc49f1 100644
>>>> --- a/hw/mem/Kconfig
>>>> +++ b/hw/mem/Kconfig
>>>> @@ -7,6 +7,4 @@ config MEM_DEVICE
>>>>
>>>> config NVDIMM
>>>> bool
>>>> - default y
>>>> - depends on (PC || PSERIES || ARM_VIRT)
>>>> select MEM_DEVICE
>>>> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
>>>> index e51e0e5e5ac..66e0b15d9ef 100644
>>>> --- a/hw/ppc/Kconfig
>>>> +++ b/hw/ppc/Kconfig
>>>> @@ -3,6 +3,7 @@ config PSERIES
>>>> imply PCI_DEVICES
>>>> imply TEST_DEVICES
>>>> imply VIRTIO_VGA
>>>> + imply NVDIMM
>>>> select DIMM
>>>> select PCI
>>>> select SPAPR_VSCSI
>
> Regards,
> Bin
>
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
2021-05-16 12:42 ` Philippe Mathieu-Daudé
@ 2021-05-16 14:15 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-16 14:15 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Eduardo Habkost, Michael S. Tsirkin,
Richard Henderson, Greg Kurz, qemu-devel@nongnu.org Developers,
open list:ARM TCG CPUs, open list:PowerPC TCG CPUs,
Paolo Bonzini, Igor Mammedov, David Gibson
On Sun, May 16, 2021 at 8:42 PM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 5/16/21 2:50 AM, Bin Meng wrote:
> > On Sun, May 16, 2021 at 1:33 AM Philippe Mathieu-Daudé
> > <philmd@redhat.com> wrote:
> >>
> >> On 5/14/21 5:02 AM, Bin Meng wrote:
> >>> On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
> >>> <philmd@redhat.com> wrote:
> >>>>
> >>>> Per the kconfig.rst:
> >>>>
> >>>> A device should be listed [...] ``imply`` if (depending on
> >>>> the QEMU command line) the board may or may not be started
> >>>> without it.
> >>>>
> >>>> This is the case with the NVDIMM device (it is certainly possible
> >>>> to start a machine without NVDIMM) , so use the 'imply' weak
> >>>> reverse dependency to select the symbol.
> >>>>
> >>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> >>>> ---
> >>>> default-configs/devices/ppc64-softmmu.mak | 1 -
> >>>> hw/arm/Kconfig | 1 +
> >>>> hw/i386/Kconfig | 1 +
> >>>> hw/mem/Kconfig | 2 --
> >>>> hw/ppc/Kconfig | 1 +
> >>>> 5 files changed, 3 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/default-configs/devices/ppc64-softmmu.mak b/default-configs/devices/ppc64-softmmu.mak
> >>>> index ae0841fa3a1..cca52665d90 100644
> >>>> --- a/default-configs/devices/ppc64-softmmu.mak
> >>>> +++ b/default-configs/devices/ppc64-softmmu.mak
> >>>> @@ -8,4 +8,3 @@ CONFIG_POWERNV=y
> >>>>
> >>>> # For pSeries
> >>>> CONFIG_PSERIES=y
> >>>> -CONFIG_NVDIMM=y
> >>>
> >>> I think only removing this one makes sense. I fail to see any
> >>> difference of other changes in this patch.
> >>
> >> See below "depends on (PC || PSERIES || ARM_VIRT)"
> >
> > Yes, I saw that. This change does not make any difference compared to
> > "depends on"
>
> No, there is no logical change indeed. Simply IIUC the documentation
> "imply" is the preferred form.
Okay, per the documentation "imply" is the preferred way over "default
y && depends on".
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
2021-05-13 16:38 ` [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on' Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-14 3:03 ` Bin Meng
2021-05-13 16:38 ` [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS Philippe Mathieu-Daudé
` (8 subsequent siblings)
10 siblings, 1 reply; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: John Snow, Paolo Bonzini, Philippe Mathieu-Daudé, open list:IDE
The pci_ide_create_devs() function is declared i hw/ide/qdev.c:
$ git grep ide_create_drive
hw/ide/pci.c:491: ide_create_drive(d->bus + bus[i], unit[i], hd_table[i]);
hw/ide/qdev.c:127:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
include/hw/ide/internal.h:653:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
Fix the correct symbol dependency to avoid build failure when
deselecting some machines:
/usr/bin/ld: libcommon.fa.p/hw_ide_pci.c.o: in function `pci_ide_create_devs':
hw/ide/pci.c:491: undefined reference to `ide_create_drive'
Fixes: 8f01b41e109 ("ide: express dependencies with Kconfig")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/ide/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/ide/Kconfig b/hw/ide/Kconfig
index 8e2c8934549..dd85fa3619f 100644
--- a/hw/ide/Kconfig
+++ b/hw/ide/Kconfig
@@ -8,7 +8,7 @@ config IDE_QDEV
config IDE_PCI
bool
depends on PCI
- select IDE_CORE
+ select IDE_QDEV
config IDE_ISA
bool
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV
2021-05-13 16:38 ` [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV Philippe Mathieu-Daudé
@ 2021-05-14 3:03 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 3:03 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Paolo Bonzini, John Snow, qemu-devel@nongnu.org Developers,
open list:IDE
On Fri, May 14, 2021 at 12:56 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> The pci_ide_create_devs() function is declared i hw/ide/qdev.c:
>
> $ git grep ide_create_drive
> hw/ide/pci.c:491: ide_create_drive(d->bus + bus[i], unit[i], hd_table[i]);
> hw/ide/qdev.c:127:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
> include/hw/ide/internal.h:653:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
>
> Fix the correct symbol dependency to avoid build failure when
> deselecting some machines:
>
> /usr/bin/ld: libcommon.fa.p/hw_ide_pci.c.o: in function `pci_ide_create_devs':
> hw/ide/pci.c:491: undefined reference to `ide_create_drive'
>
> Fixes: 8f01b41e109 ("ide: express dependencies with Kconfig")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/ide/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
2021-05-13 16:38 ` [PATCH 01/10] hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on' Philippe Mathieu-Daudé
2021-05-13 16:38 ` [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 16:42 ` Hao Wu
2021-05-14 2:42 ` Bin Meng
2021-05-13 16:38 ` [PATCH 04/10] hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board Philippe Mathieu-Daudé
` (7 subsequent siblings)
10 siblings, 2 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Corey Minyard, Peter Maydell, Doug Evans, Hao Wu, Tyrong Ting,
open list:ARM TCG CPUs, Paolo Bonzini,
Philippe Mathieu-Daudé
The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but
this isn't advertised with proper Kconfig symbol, leading
to an early build failure when building NPCM7XX machines
standalone:
The following clauses were found for AT24C
config AT24C depends on I2C
select AT24C if NPCM7XX
Fix by adding SMBUS to NPCM7XX.
Fixes: 94e77879395 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Cc: Doug Evans<dje@google.com>
Cc: Hao Wu <wuhaotsh@google.com>
Cc: Tyrong Ting<kfting@nuvoton.com>
Cc: Corey Minyard <cminyard@mvista.com>
---
hw/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 67723d9ea6a..85c6a1a088c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -373,6 +373,7 @@ config NPCM7XX
bool
select A9MPCORE
select ARM_GIC
+ select SMBUS
select AT24C # EEPROM
select PL310 # cache controller
select SERIAL
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS
2021-05-13 16:38 ` [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS Philippe Mathieu-Daudé
@ 2021-05-13 16:42 ` Hao Wu
2021-05-14 2:42 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: Hao Wu @ 2021-05-13 16:42 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: QEMU Developers, Paolo Bonzini, Doug Evans, Tyrong Ting,
Corey Minyard, Peter Maydell, open list:ARM TCG CPUs
[-- Attachment #1: Type: text/plain, Size: 1234 bytes --]
Reviewed-by: Hao Wu <wuhaotsh@google.com>
On Thu, May 13, 2021 at 9:39 AM Philippe Mathieu-Daudé <philmd@redhat.com>
wrote:
> The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but
> this isn't advertised with proper Kconfig symbol, leading
> to an early build failure when building NPCM7XX machines
> standalone:
>
> The following clauses were found for AT24C
>
> config AT24C depends on I2C
> select AT24C if NPCM7XX
>
> Fix by adding SMBUS to NPCM7XX.
>
> Fixes: 94e77879395 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Doug Evans<dje@google.com>
> Cc: Hao Wu <wuhaotsh@google.com>
> Cc: Tyrong Ting<kfting@nuvoton.com>
> Cc: Corey Minyard <cminyard@mvista.com>
> ---
> hw/arm/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 67723d9ea6a..85c6a1a088c 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -373,6 +373,7 @@ config NPCM7XX
> bool
> select A9MPCORE
> select ARM_GIC
> + select SMBUS
> select AT24C # EEPROM
> select PL310 # cache controller
> select SERIAL
> --
> 2.26.3
>
>
[-- Attachment #2: Type: text/html, Size: 1985 bytes --]
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS
2021-05-13 16:38 ` [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS Philippe Mathieu-Daudé
2021-05-13 16:42 ` Hao Wu
@ 2021-05-14 2:42 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:42 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Corey Minyard, Peter Maydell, qemu-devel@nongnu.org Developers,
Doug Evans, Hao Wu, Tyrong Ting, open list:ARM TCG CPUs,
Paolo Bonzini
On Fri, May 14, 2021 at 12:53 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but
> this isn't advertised with proper Kconfig symbol, leading
> to an early build failure when building NPCM7XX machines
> standalone:
>
> The following clauses were found for AT24C
>
> config AT24C depends on I2C
> select AT24C if NPCM7XX
>
> Fix by adding SMBUS to NPCM7XX.
>
> Fixes: 94e77879395 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Doug Evans<dje@google.com>
> Cc: Hao Wu <wuhaotsh@google.com>
> Cc: Tyrong Ting<kfting@nuvoton.com>
> Cc: Corey Minyard <cminyard@mvista.com>
> ---
> hw/arm/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 04/10] hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2021-05-13 16:38 ` [PATCH 03/10] hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-14 2:43 ` Bin Meng
2021-05-13 16:38 ` [PATCH 05/10] hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25 Philippe Mathieu-Daudé
` (6 subsequent siblings)
10 siblings, 1 reply; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Paolo Bonzini, open list:ARM TCG CPUs,
Philippe Mathieu-Daudé,
Peter Maydell
In commit c4f00daa5b3 ("imx25-pdk: create ds1338 for qtest inside
the test") we removed the DS1338 device from the i.MX25 machine
but forgot to remove it in the machine Kconfig definitions, do
it now.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/arm/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 85c6a1a088c..5827c092b28 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -386,7 +386,6 @@ config FSL_IMX25
select IMX_FEC
select IMX_I2C
select WDT_IMX2
- select DS1338
config FSL_IMX31
bool
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 04/10] hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board
2021-05-13 16:38 ` [PATCH 04/10] hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board Philippe Mathieu-Daudé
@ 2021-05-14 2:43 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:43 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Paolo Bonzini, open list:ARM TCG CPUs,
qemu-devel@nongnu.org Developers, Peter Maydell
On Fri, May 14, 2021 at 12:56 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> In commit c4f00daa5b3 ("imx25-pdk: create ds1338 for qtest inside
> the test") we removed the DS1338 device from the i.MX25 machine
> but forgot to remove it in the machine Kconfig definitions, do
> it now.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/arm/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 05/10] hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (3 preceding siblings ...)
2021-05-13 16:38 ` [PATCH 04/10] hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-14 2:45 ` Bin Meng
2021-05-13 16:38 ` Philippe Mathieu-Daudé
` (5 subsequent siblings)
10 siblings, 1 reply; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Paolo Bonzini, open list:ARM TCG CPUs,
Philippe Mathieu-Daudé,
Guenter Roeck, Peter Maydell
Commit bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
added a dependency on the TYPE_IMX_USDHC model, but forgot to add
the Kconfig selector. Fix that to solve when built stand-alone:
$ qemu-system-arm -M imx25-pdk
qemu-system-arm: missing object type 'imx-usdhc'
Aborted (core dumped)
Fixes: bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Cc: Guenter Roeck <linux@roeck-us.net>
---
hw/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 5827c092b28..6bb34926bb5 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -386,6 +386,7 @@ config FSL_IMX25
select IMX_FEC
select IMX_I2C
select WDT_IMX2
+ select SDHCI
config FSL_IMX31
bool
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 05/10] hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25
2021-05-13 16:38 ` [PATCH 05/10] hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25 Philippe Mathieu-Daudé
@ 2021-05-14 2:45 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:45 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Paolo Bonzini, open list:ARM TCG CPUs,
qemu-devel@nongnu.org Developers, Guenter Roeck, Peter Maydell
On Fri, May 14, 2021 at 12:56 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Commit bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
> added a dependency on the TYPE_IMX_USDHC model, but forgot to add
> the Kconfig selector. Fix that to solve when built stand-alone:
>
> $ qemu-system-arm -M imx25-pdk
> qemu-system-arm: missing object type 'imx-usdhc'
> Aborted (core dumped)
>
> Fixes: bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Guenter Roeck <linux@roeck-us.net>
> ---
> hw/arm/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 16:38 ` [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV Philippe Mathieu-Daudé
` (9 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: open list:RISC-V TCG CPUs, Bin Meng, Alistair Francis,
Paolo Bonzini, Philippe Mathieu-Daudé,
Palmer Dabbelt
Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
emulation") added a dependency on the SERIAL model, but forgot to
add the Kconfig selector. Fix that to solve when built the
MICROCHIP_PFSOC machine stand-alone:
/usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 86957ec7b06..b72a248809e 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
select SIFIVE_CLINT
select SIFIVE_PDMA
select SIFIVE_PLIC
+ select SERIAL
select UNIMP
config OPENTITAN
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Paolo Bonzini, Philippe Mathieu-Daudé,
Bin Meng, Alistair Francis, Palmer Dabbelt,
open list:RISC-V TCG CPUs
Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
emulation") added a dependency on the SERIAL model, but forgot to
add the Kconfig selector. Fix that to solve when built the
MICROCHIP_PFSOC machine stand-alone:
/usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 86957ec7b06..b72a248809e 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
select SIFIVE_CLINT
select SIFIVE_PDMA
select SIFIVE_PLIC
+ select SERIAL
select UNIMP
config OPENTITAN
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
2021-05-13 16:38 ` Philippe Mathieu-Daudé
@ 2021-05-14 2:47 ` Bin Meng
-1 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:47 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: open list:RISC-V TCG CPUs, Bin Meng,
qemu-devel@nongnu.org Developers, Alistair Francis,
Paolo Bonzini, Palmer Dabbelt
Hi Philippe,
On Fri, May 14, 2021 at 12:57 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
> emulation") added a dependency on the SERIAL model, but forgot to
> add the Kconfig selector. Fix that to solve when built the
> MICROCHIP_PFSOC machine stand-alone:
>
> /usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
> hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
>
> Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Bin Meng <bin.meng@windriver.com>
> Cc: Alistair Francis <alistair.francis@wdc.com>
> ---
> hw/riscv/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> index 86957ec7b06..b72a248809e 100644
> --- a/hw/riscv/Kconfig
> +++ b/hw/riscv/Kconfig
> @@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
> select SIFIVE_CLINT
> select SIFIVE_PDMA
> select SIFIVE_PLIC
> + select SERIAL
This dependency should be expressed by MCHP_PFSOC_MMUART in hw/char/Kconfig
> select UNIMP
>
> config OPENTITAN
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
@ 2021-05-14 2:47 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:47 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: qemu-devel@nongnu.org Developers, open list:RISC-V TCG CPUs,
Bin Meng, Alistair Francis, Paolo Bonzini, Palmer Dabbelt
Hi Philippe,
On Fri, May 14, 2021 at 12:57 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
> emulation") added a dependency on the SERIAL model, but forgot to
> add the Kconfig selector. Fix that to solve when built the
> MICROCHIP_PFSOC machine stand-alone:
>
> /usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
> hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
>
> Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Bin Meng <bin.meng@windriver.com>
> Cc: Alistair Francis <alistair.francis@wdc.com>
> ---
> hw/riscv/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> index 86957ec7b06..b72a248809e 100644
> --- a/hw/riscv/Kconfig
> +++ b/hw/riscv/Kconfig
> @@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
> select SIFIVE_CLINT
> select SIFIVE_PDMA
> select SIFIVE_PLIC
> + select SERIAL
This dependency should be expressed by MCHP_PFSOC_MMUART in hw/char/Kconfig
> select UNIMP
>
> config OPENTITAN
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
2021-05-14 2:47 ` Bin Meng
@ 2021-05-14 8:14 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-14 8:14 UTC (permalink / raw)
To: Bin Meng
Cc: open list:RISC-V TCG CPUs, Bin Meng,
qemu-devel@nongnu.org Developers, Alistair Francis,
Paolo Bonzini, Palmer Dabbelt
On 5/14/21 4:47 AM, Bin Meng wrote:
> Hi Philippe,
>
> On Fri, May 14, 2021 at 12:57 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
>>
>> Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
>> emulation") added a dependency on the SERIAL model, but forgot to
>> add the Kconfig selector. Fix that to solve when built the
>> MICROCHIP_PFSOC machine stand-alone:
>>
>> /usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
>> hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
>>
>> Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>> Cc: Bin Meng <bin.meng@windriver.com>
>> Cc: Alistair Francis <alistair.francis@wdc.com>
>> ---
>> hw/riscv/Kconfig | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
>> index 86957ec7b06..b72a248809e 100644
>> --- a/hw/riscv/Kconfig
>> +++ b/hw/riscv/Kconfig
>> @@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
>> select SIFIVE_CLINT
>> select SIFIVE_PDMA
>> select SIFIVE_PLIC
>> + select SERIAL
>
> This dependency should be expressed by MCHP_PFSOC_MMUART in hw/char/Kconfig
Oh I missed this symbol, good catch!
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 06/10] hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
@ 2021-05-14 8:14 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-14 8:14 UTC (permalink / raw)
To: Bin Meng
Cc: qemu-devel@nongnu.org Developers, open list:RISC-V TCG CPUs,
Bin Meng, Alistair Francis, Paolo Bonzini, Palmer Dabbelt
On 5/14/21 4:47 AM, Bin Meng wrote:
> Hi Philippe,
>
> On Fri, May 14, 2021 at 12:57 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
>>
>> Commit a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART
>> emulation") added a dependency on the SERIAL model, but forgot to
>> add the Kconfig selector. Fix that to solve when built the
>> MICROCHIP_PFSOC machine stand-alone:
>>
>> /usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
>> hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
>>
>> Fixes: a8fb0a500a6 ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>> Cc: Bin Meng <bin.meng@windriver.com>
>> Cc: Alistair Francis <alistair.francis@wdc.com>
>> ---
>> hw/riscv/Kconfig | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
>> index 86957ec7b06..b72a248809e 100644
>> --- a/hw/riscv/Kconfig
>> +++ b/hw/riscv/Kconfig
>> @@ -12,6 +12,7 @@ config MICROCHIP_PFSOC
>> select SIFIVE_CLINT
>> select SIFIVE_PDMA
>> select SIFIVE_PLIC
>> + select SERIAL
>
> This dependency should be expressed by MCHP_PFSOC_MMUART in hw/char/Kconfig
Oh I missed this symbol, good catch!
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 07/10] hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 16:38 ` [PATCH 02/10] hw/ide/Kconfig: Add missing dependency PCI -> QDEV Philippe Mathieu-Daudé
` (9 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: open list:RISC-V TCG CPUs, Bin Meng, Alistair Francis,
Paolo Bonzini, Philippe Mathieu-Daudé,
Palmer Dabbelt
Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
symbol and only have these machines select it. Adapt the Meson file
to only built it if required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/riscv/Kconfig | 5 +++++
hw/riscv/meson.build | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index b72a248809e..b22736169c1 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -1,3 +1,6 @@
+config RISCV_NUMA
+ bool
+
config IBEX
bool
@@ -35,6 +38,7 @@ config RISCV_VIRT
imply PCI_DEVICES
imply VIRTIO_VGA
imply TEST_DEVICES
+ select RISCV_NUMA
select GOLDFISH_RTC
select MSI_NONBROKEN
select PCI
@@ -75,6 +79,7 @@ config SIFIVE_U
config SPIKE
bool
+ select RISCV_NUMA
select HTIF
select MSI_NONBROKEN
select SIFIVE_CLINT
diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build
index a97454661c0..ab6cae57eae 100644
--- a/hw/riscv/meson.build
+++ b/hw/riscv/meson.build
@@ -1,6 +1,6 @@
riscv_ss = ss.source_set()
riscv_ss.add(files('boot.c'), fdt)
-riscv_ss.add(files('numa.c'))
+riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c'))
riscv_ss.add(files('riscv_hart.c'))
riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c'))
riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c'))
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH 07/10] hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Paolo Bonzini, Philippe Mathieu-Daudé,
Palmer Dabbelt, Alistair Francis, Bin Meng,
open list:RISC-V TCG CPUs
Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
symbol and only have these machines select it. Adapt the Meson file
to only built it if required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/riscv/Kconfig | 5 +++++
hw/riscv/meson.build | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index b72a248809e..b22736169c1 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -1,3 +1,6 @@
+config RISCV_NUMA
+ bool
+
config IBEX
bool
@@ -35,6 +38,7 @@ config RISCV_VIRT
imply PCI_DEVICES
imply VIRTIO_VGA
imply TEST_DEVICES
+ select RISCV_NUMA
select GOLDFISH_RTC
select MSI_NONBROKEN
select PCI
@@ -75,6 +79,7 @@ config SIFIVE_U
config SPIKE
bool
+ select RISCV_NUMA
select HTIF
select MSI_NONBROKEN
select SIFIVE_CLINT
diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build
index a97454661c0..ab6cae57eae 100644
--- a/hw/riscv/meson.build
+++ b/hw/riscv/meson.build
@@ -1,6 +1,6 @@
riscv_ss = ss.source_set()
riscv_ss.add(files('boot.c'), fdt)
-riscv_ss.add(files('numa.c'))
+riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c'))
riscv_ss.add(files('riscv_hart.c'))
riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c'))
riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c'))
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 07/10] hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
2021-05-13 16:38 ` Philippe Mathieu-Daudé
@ 2021-05-14 2:49 ` Bin Meng
-1 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:49 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: open list:RISC-V TCG CPUs, Bin Meng,
qemu-devel@nongnu.org Developers, Alistair Francis,
Paolo Bonzini, Palmer Dabbelt
On Fri, May 14, 2021 at 12:58 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
> symbol and only have these machines select it. Adapt the Meson file
> to only built it if required.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/riscv/Kconfig | 5 +++++
> hw/riscv/meson.build | 2 +-
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 07/10] hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
@ 2021-05-14 2:49 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:49 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: qemu-devel@nongnu.org Developers, open list:RISC-V TCG CPUs,
Bin Meng, Alistair Francis, Paolo Bonzini, Palmer Dabbelt
On Fri, May 14, 2021 at 12:58 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
> symbol and only have these machines select it. Adapt the Meson file
> to only built it if required.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/riscv/Kconfig | 5 +++++
> hw/riscv/meson.build | 2 +-
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (6 preceding siblings ...)
2021-05-13 16:38 ` Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 23:36 ` David Gibson
2021-05-14 2:50 ` Bin Meng
2021-05-13 16:38 ` [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config Philippe Mathieu-Daudé
` (2 subsequent siblings)
10 siblings, 2 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel
Cc: Greg Kurz, Amit Singh Tomar, open list:PowerPC TCG CPUs,
Paolo Bonzini, Philippe Mathieu-Daudé,
Andrew Randrianasulu, David Gibson
Commit 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate
RTC with it") added a global dependency on the DS1338 model, instead
of a machine one (via Kconfig). This gives trouble when building
standalone machines not exposing I2C bus:
The following clauses were found for DS1338
CONFIG_DS1338=y
config DS1338 depends on I2C
Fix by selecting the DS1338 symbol in the single machine requiring
it, the E500.
Fixes: 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Cc: Amit Singh Tomar <amit.tomar@freescale.com>
Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
---
default-configs/devices/ppc-softmmu.mak | 1 -
hw/ppc/Kconfig | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/default-configs/devices/ppc-softmmu.mak b/default-configs/devices/ppc-softmmu.mak
index c2d41198cde..5a7f99d1e45 100644
--- a/default-configs/devices/ppc-softmmu.mak
+++ b/default-configs/devices/ppc-softmmu.mak
@@ -1,7 +1,6 @@
# Default configuration for ppc-softmmu
# For embedded PPCs:
-CONFIG_DS1338=y
CONFIG_E500=y
CONFIG_PPC405=y
CONFIG_PPC440=y
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 66e0b15d9ef..2e4c56eb770 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -128,6 +128,7 @@ config E500
select SERIAL
select MPC_I2C
select FDT_PPC
+ select DS1338
config VIRTEX
bool
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
2021-05-13 16:38 ` [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC Philippe Mathieu-Daudé
@ 2021-05-13 23:36 ` David Gibson
2021-05-14 2:50 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: David Gibson @ 2021-05-13 23:36 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Greg Kurz, qemu-devel, Amit Singh Tomar,
open list:PowerPC TCG CPUs, Paolo Bonzini, Andrew Randrianasulu
[-- Attachment #1: Type: text/plain, Size: 1926 bytes --]
On Thu, May 13, 2021 at 06:38:56PM +0200, Philippe Mathieu-Daudé wrote:
> Commit 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate
> RTC with it") added a global dependency on the DS1338 model, instead
> of a machine one (via Kconfig). This gives trouble when building
> standalone machines not exposing I2C bus:
>
> The following clauses were found for DS1338
>
> CONFIG_DS1338=y
> config DS1338 depends on I2C
>
> Fix by selecting the DS1338 symbol in the single machine requiring
> it, the E500.
>
> Fixes: 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> Cc: Amit Singh Tomar <amit.tomar@freescale.com>
> Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
> ---
> default-configs/devices/ppc-softmmu.mak | 1 -
> hw/ppc/Kconfig | 1 +
> 2 files changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/default-configs/devices/ppc-softmmu.mak b/default-configs/devices/ppc-softmmu.mak
> index c2d41198cde..5a7f99d1e45 100644
> --- a/default-configs/devices/ppc-softmmu.mak
> +++ b/default-configs/devices/ppc-softmmu.mak
> @@ -1,7 +1,6 @@
> # Default configuration for ppc-softmmu
>
> # For embedded PPCs:
> -CONFIG_DS1338=y
> CONFIG_E500=y
> CONFIG_PPC405=y
> CONFIG_PPC440=y
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 66e0b15d9ef..2e4c56eb770 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -128,6 +128,7 @@ config E500
> select SERIAL
> select MPC_I2C
> select FDT_PPC
> + select DS1338
>
> config VIRTEX
> bool
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
2021-05-13 16:38 ` [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC Philippe Mathieu-Daudé
2021-05-13 23:36 ` David Gibson
@ 2021-05-14 2:50 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:50 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: qemu-devel@nongnu.org Developers, Greg Kurz, Amit Singh Tomar,
open list:PowerPC TCG CPUs, Paolo Bonzini, Andrew Randrianasulu,
David Gibson
On Fri, May 14, 2021 at 1:02 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Commit 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate
> RTC with it") added a global dependency on the DS1338 model, instead
> of a machine one (via Kconfig). This gives trouble when building
> standalone machines not exposing I2C bus:
>
> The following clauses were found for DS1338
>
> CONFIG_DS1338=y
> config DS1338 depends on I2C
>
> Fix by selecting the DS1338 symbol in the single machine requiring
> it, the E500.
>
> Fixes: 7abb479c7ab ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Cc: Amit Singh Tomar <amit.tomar@freescale.com>
> Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
> ---
> default-configs/devices/ppc-softmmu.mak | 1 -
> hw/ppc/Kconfig | 1 +
> 2 files changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (7 preceding siblings ...)
2021-05-13 16:38 ` [PATCH 08/10] hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 17:00 ` Philippe Mathieu-Daudé
2021-05-14 2:53 ` Bin Meng
2021-05-13 16:38 ` [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required Philippe Mathieu-Daudé
2021-05-13 17:59 ` [PATCH 00/10] hw: Various Kconfig fixes Paolo Bonzini
10 siblings, 2 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Philippe Mathieu-Daudé
Cmmit 56b5170c87e ("semihosting: Move ARM semihosting code to
shared directories"), added the ARM_COMPATIBLE_SEMIHOSTING symbol
which selects SEMIHOSTING.
Since the ARM/RISC-V targets select ARM_COMPATIBLE_SEMIHOSTING,
they don't need to select SEMIHOSTING manually. Simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
default-configs/devices/arm-softmmu.mak | 1 -
default-configs/devices/riscv32-softmmu.mak | 1 -
default-configs/devices/riscv64-softmmu.mak | 1 -
3 files changed, 3 deletions(-)
diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 0500156a0c7..341d439de6f 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -41,6 +41,5 @@ CONFIG_MICROBIT=y
CONFIG_FSL_IMX25=y
CONFIG_FSL_IMX7=y
CONFIG_FSL_IMX6UL=y
-CONFIG_SEMIHOSTING=y
CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
CONFIG_ALLWINNER_H3=y
diff --git a/default-configs/devices/riscv32-softmmu.mak b/default-configs/devices/riscv32-softmmu.mak
index d847bd5692e..5c9ad2590ef 100644
--- a/default-configs/devices/riscv32-softmmu.mak
+++ b/default-configs/devices/riscv32-softmmu.mak
@@ -3,7 +3,6 @@
# Uncomment the following lines to disable these optional devices:
#
#CONFIG_PCI_DEVICES=n
-CONFIG_SEMIHOSTING=y
CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
# Boards:
diff --git a/default-configs/devices/riscv64-softmmu.mak b/default-configs/devices/riscv64-softmmu.mak
index bc69301fa4a..8a92f0a2c74 100644
--- a/default-configs/devices/riscv64-softmmu.mak
+++ b/default-configs/devices/riscv64-softmmu.mak
@@ -3,7 +3,6 @@
# Uncomment the following lines to disable these optional devices:
#
#CONFIG_PCI_DEVICES=n
-CONFIG_SEMIHOSTING=y
CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
# Boards:
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config
2021-05-13 16:38 ` [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config Philippe Mathieu-Daudé
@ 2021-05-13 17:00 ` Philippe Mathieu-Daudé
2021-05-14 2:53 ` Bin Meng
1 sibling, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 17:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Alex Bennée
Forgot to Cc Alex.
On 5/13/21 6:38 PM, Philippe Mathieu-Daudé wrote:
> Cmmit 56b5170c87e ("semihosting: Move ARM semihosting code to
> shared directories"), added the ARM_COMPATIBLE_SEMIHOSTING symbol
> which selects SEMIHOSTING.
>
> Since the ARM/RISC-V targets select ARM_COMPATIBLE_SEMIHOSTING,
> they don't need to select SEMIHOSTING manually. Simplify.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> default-configs/devices/arm-softmmu.mak | 1 -
> default-configs/devices/riscv32-softmmu.mak | 1 -
> default-configs/devices/riscv64-softmmu.mak | 1 -
> 3 files changed, 3 deletions(-)
>
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 0500156a0c7..341d439de6f 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -41,6 +41,5 @@ CONFIG_MICROBIT=y
> CONFIG_FSL_IMX25=y
> CONFIG_FSL_IMX7=y
> CONFIG_FSL_IMX6UL=y
> -CONFIG_SEMIHOSTING=y
> CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> CONFIG_ALLWINNER_H3=y
> diff --git a/default-configs/devices/riscv32-softmmu.mak b/default-configs/devices/riscv32-softmmu.mak
> index d847bd5692e..5c9ad2590ef 100644
> --- a/default-configs/devices/riscv32-softmmu.mak
> +++ b/default-configs/devices/riscv32-softmmu.mak
> @@ -3,7 +3,6 @@
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_SEMIHOSTING=y
> CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
> diff --git a/default-configs/devices/riscv64-softmmu.mak b/default-configs/devices/riscv64-softmmu.mak
> index bc69301fa4a..8a92f0a2c74 100644
> --- a/default-configs/devices/riscv64-softmmu.mak
> +++ b/default-configs/devices/riscv64-softmmu.mak
> @@ -3,7 +3,6 @@
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_SEMIHOSTING=y
> CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
>
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config
2021-05-13 16:38 ` [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config Philippe Mathieu-Daudé
2021-05-13 17:00 ` Philippe Mathieu-Daudé
@ 2021-05-14 2:53 ` Bin Meng
2021-05-14 2:54 ` Bin Meng
1 sibling, 1 reply; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:53 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Paolo Bonzini, qemu-devel@nongnu.org Developers
On Fri, May 14, 2021 at 12:58 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Cmmit 56b5170c87e ("semihosting: Move ARM semihosting code to
> shared directories"), added the ARM_COMPATIBLE_SEMIHOSTING symbol
> which selects SEMIHOSTING.
>
> Since the ARM/RISC-V targets select ARM_COMPATIBLE_SEMIHOSTING,
> they don't need to select SEMIHOSTING manually. Simplify.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> default-configs/devices/arm-softmmu.mak | 1 -
> default-configs/devices/riscv32-softmmu.mak | 1 -
> default-configs/devices/riscv64-softmmu.mak | 1 -
> 3 files changed, 3 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config
2021-05-14 2:53 ` Bin Meng
@ 2021-05-14 2:54 ` Bin Meng
0 siblings, 0 replies; 39+ messages in thread
From: Bin Meng @ 2021-05-14 2:54 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Paolo Bonzini, qemu-devel@nongnu.org Developers
On Fri, May 14, 2021 at 10:53 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Fri, May 14, 2021 at 12:58 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
> >
> > Cmmit 56b5170c87e ("semihosting: Move ARM semihosting code to
typo: Commit
> > shared directories"), added the ARM_COMPATIBLE_SEMIHOSTING symbol
> > which selects SEMIHOSTING.
> >
> > Since the ARM/RISC-V targets select ARM_COMPATIBLE_SEMIHOSTING,
> > they don't need to select SEMIHOSTING manually. Simplify.
> >
> > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> > ---
> > default-configs/devices/arm-softmmu.mak | 1 -
> > default-configs/devices/riscv32-softmmu.mak | 1 -
> > default-configs/devices/riscv64-softmmu.mak | 1 -
> > 3 files changed, 3 deletions(-)
> >
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (8 preceding siblings ...)
2021-05-13 16:38 ` [PATCH 09/10] default-configs/devices: Remove implicy SEMIHOSTING config Philippe Mathieu-Daudé
@ 2021-05-13 16:38 ` Philippe Mathieu-Daudé
2021-05-13 17:00 ` Philippe Mathieu-Daudé
2021-05-13 17:58 ` Paolo Bonzini
2021-05-13 17:59 ` [PATCH 00/10] hw: Various Kconfig fixes Paolo Bonzini
10 siblings, 2 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 16:38 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Philippe Mathieu-Daudé
ARM_COMPATIBLE_SEMIHOSTING is not optional on these targets.
Move the variable assignment out of the block documented with
"Uncomment the following lines to disable these optional devices".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
default-configs/devices/arm-softmmu.mak | 4 +++-
default-configs/devices/riscv32-softmmu.mak | 4 +++-
default-configs/devices/riscv64-softmmu.mak | 4 +++-
3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 341d439de6f..2713e5e9eb7 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -1,5 +1,8 @@
# Default configuration for arm-softmmu
+# TODO: semihosting is always required - move to default-configs/targets/
+CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
+
# TODO: ARM_V7M is currently always required - make this more flexible!
CONFIG_ARM_V7M=y
@@ -41,5 +44,4 @@ CONFIG_MICROBIT=y
CONFIG_FSL_IMX25=y
CONFIG_FSL_IMX7=y
CONFIG_FSL_IMX6UL=y
-CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
CONFIG_ALLWINNER_H3=y
diff --git a/default-configs/devices/riscv32-softmmu.mak b/default-configs/devices/riscv32-softmmu.mak
index 5c9ad2590ef..7219f9749ad 100644
--- a/default-configs/devices/riscv32-softmmu.mak
+++ b/default-configs/devices/riscv32-softmmu.mak
@@ -1,9 +1,11 @@
# Default configuration for riscv32-softmmu
+# TODO: semihosting is always required - move to default-configs/targets/
+CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
+
# Uncomment the following lines to disable these optional devices:
#
#CONFIG_PCI_DEVICES=n
-CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
# Boards:
#
diff --git a/default-configs/devices/riscv64-softmmu.mak b/default-configs/devices/riscv64-softmmu.mak
index 8a92f0a2c74..1d1b8bb9f68 100644
--- a/default-configs/devices/riscv64-softmmu.mak
+++ b/default-configs/devices/riscv64-softmmu.mak
@@ -1,9 +1,11 @@
# Default configuration for riscv64-softmmu
+# TODO: semihosting is always required - move to default-configs/targets/
+CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
+
# Uncomment the following lines to disable these optional devices:
#
#CONFIG_PCI_DEVICES=n
-CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
# Boards:
#
--
2.26.3
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required
2021-05-13 16:38 ` [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required Philippe Mathieu-Daudé
@ 2021-05-13 17:00 ` Philippe Mathieu-Daudé
2021-05-13 17:58 ` Paolo Bonzini
1 sibling, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 17:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Thomas Huth, Alex Bennée
Cc Alex & Thomas
On 5/13/21 6:38 PM, Philippe Mathieu-Daudé wrote:
> ARM_COMPATIBLE_SEMIHOSTING is not optional on these targets.
> Move the variable assignment out of the block documented with
> "Uncomment the following lines to disable these optional devices".
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> default-configs/devices/arm-softmmu.mak | 4 +++-
> default-configs/devices/riscv32-softmmu.mak | 4 +++-
> default-configs/devices/riscv64-softmmu.mak | 4 +++-
> 3 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 341d439de6f..2713e5e9eb7 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -1,5 +1,8 @@
> # Default configuration for arm-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # TODO: ARM_V7M is currently always required - make this more flexible!
> CONFIG_ARM_V7M=y
>
> @@ -41,5 +44,4 @@ CONFIG_MICROBIT=y
> CONFIG_FSL_IMX25=y
> CONFIG_FSL_IMX7=y
> CONFIG_FSL_IMX6UL=y
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> CONFIG_ALLWINNER_H3=y
> diff --git a/default-configs/devices/riscv32-softmmu.mak b/default-configs/devices/riscv32-softmmu.mak
> index 5c9ad2590ef..7219f9749ad 100644
> --- a/default-configs/devices/riscv32-softmmu.mak
> +++ b/default-configs/devices/riscv32-softmmu.mak
> @@ -1,9 +1,11 @@
> # Default configuration for riscv32-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
> #
> diff --git a/default-configs/devices/riscv64-softmmu.mak b/default-configs/devices/riscv64-softmmu.mak
> index 8a92f0a2c74..1d1b8bb9f68 100644
> --- a/default-configs/devices/riscv64-softmmu.mak
> +++ b/default-configs/devices/riscv64-softmmu.mak
> @@ -1,9 +1,11 @@
> # Default configuration for riscv64-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
> #
>
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required
2021-05-13 16:38 ` [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required Philippe Mathieu-Daudé
2021-05-13 17:00 ` Philippe Mathieu-Daudé
@ 2021-05-13 17:58 ` Paolo Bonzini
2021-05-13 18:16 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 39+ messages in thread
From: Paolo Bonzini @ 2021-05-13 17:58 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel
On 13/05/21 18:38, Philippe Mathieu-Daudé wrote:
> ARM_COMPATIBLE_SEMIHOSTING is not optional on these targets.
> Move the variable assignment out of the block documented with
> "Uncomment the following lines to disable these optional devices".
Can you document why it is always required in the commit message?
I suppose you cannot move it to default-configs/targets/ because you
want to have CONFIG_SEMIHOSTING selected automatically (patch 9).
Paolo
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> default-configs/devices/arm-softmmu.mak | 4 +++-
> default-configs/devices/riscv32-softmmu.mak | 4 +++-
> default-configs/devices/riscv64-softmmu.mak | 4 +++-
> 3 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 341d439de6f..2713e5e9eb7 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -1,5 +1,8 @@
> # Default configuration for arm-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # TODO: ARM_V7M is currently always required - make this more flexible!
> CONFIG_ARM_V7M=y
>
> @@ -41,5 +44,4 @@ CONFIG_MICROBIT=y
> CONFIG_FSL_IMX25=y
> CONFIG_FSL_IMX7=y
> CONFIG_FSL_IMX6UL=y
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> CONFIG_ALLWINNER_H3=y
> diff --git a/default-configs/devices/riscv32-softmmu.mak b/default-configs/devices/riscv32-softmmu.mak
> index 5c9ad2590ef..7219f9749ad 100644
> --- a/default-configs/devices/riscv32-softmmu.mak
> +++ b/default-configs/devices/riscv32-softmmu.mak
> @@ -1,9 +1,11 @@
> # Default configuration for riscv32-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
> #
> diff --git a/default-configs/devices/riscv64-softmmu.mak b/default-configs/devices/riscv64-softmmu.mak
> index 8a92f0a2c74..1d1b8bb9f68 100644
> --- a/default-configs/devices/riscv64-softmmu.mak
> +++ b/default-configs/devices/riscv64-softmmu.mak
> @@ -1,9 +1,11 @@
> # Default configuration for riscv64-softmmu
>
> +# TODO: semihosting is always required - move to default-configs/targets/
> +CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> +
> # Uncomment the following lines to disable these optional devices:
> #
> #CONFIG_PCI_DEVICES=n
> -CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
>
> # Boards:
> #
>
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required
2021-05-13 17:58 ` Paolo Bonzini
@ 2021-05-13 18:16 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 39+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-13 18:16 UTC (permalink / raw)
To: Paolo Bonzini, qemu-devel, Alex Bennée
On 5/13/21 7:58 PM, Paolo Bonzini wrote:
> On 13/05/21 18:38, Philippe Mathieu-Daudé wrote:
>> ARM_COMPATIBLE_SEMIHOSTING is not optional on these targets.
>> Move the variable assignment out of the block documented with
>> "Uncomment the following lines to disable these optional devices".
>
> Can you document why it is always required in the commit message?
OK, basically SEMIHOSTING is not a device but an architectural thing.
Maybe we are mixing various things, like a semihosting console (yes,
a device) and the architectural part, I will discuss that with Alex.
> I suppose you cannot move it to default-configs/targets/ because you
> want to have CONFIG_SEMIHOSTING selected automatically (patch 9).
That and other things. This is annoying me since more than 1 year.
I'm waiting Claudio's ARM KVM/TCG series get merged before getting
my hands dirty with meson.build. Let's postpone this patch (and the
previous one) for now.
Thanks for the review,
Phil.
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 00/10] hw: Various Kconfig fixes
2021-05-13 16:38 [PATCH 00/10] hw: Various Kconfig fixes Philippe Mathieu-Daudé
` (9 preceding siblings ...)
2021-05-13 16:38 ` [PATCH 10/10] default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is required Philippe Mathieu-Daudé
@ 2021-05-13 17:59 ` Paolo Bonzini
10 siblings, 0 replies; 39+ messages in thread
From: Paolo Bonzini @ 2021-05-13 17:59 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel
On 13/05/21 18:38, Philippe Mathieu-Daudé wrote:
> Various Kconfig fixes when building stand-alone machine binaries.
>
> FYI I'm looking at a way to test this automatically, by generating
> all the configurations using:
> https://docs.gitlab.com/ee/ci/parent_child_pipelines.html#dynamic-child-pipel=
> ines
> This way we could run this on release candidate tags.
>
> Philippe Mathieu-Daud=C3=A9 (10):
> hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
> hw/ide/Kconfig: Add missing dependency PCI -> QDEV
> hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS
> hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board
> hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25
> hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
> hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
> hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
> default-configs/devices: Remove implicy SEMIHOSTING config
> default-configs/devices: Clarify ARM_COMPATIBLE_SEMIHOSTING is
> required
>
> default-configs/devices/arm-softmmu.mak | 5 +++--
> default-configs/devices/ppc-softmmu.mak | 1 -
> default-configs/devices/ppc64-softmmu.mak | 1 -
> default-configs/devices/riscv32-softmmu.mak | 5 +++--
> default-configs/devices/riscv64-softmmu.mak | 5 +++--
> hw/arm/Kconfig | 4 +++-
> hw/i386/Kconfig | 1 +
> hw/ide/Kconfig | 2 +-
> hw/mem/Kconfig | 2 --
> hw/ppc/Kconfig | 2 ++
> hw/riscv/Kconfig | 6 ++++++
> hw/riscv/meson.build | 2 +-
> 12 files changed, 23 insertions(+), 13 deletions(-)
>
> --=20
> 2.26.3
>
>
>
For patches 1-8
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Feel free to send a pull request once the target maintainers for
ARM/RISC-V/PPC have had a look.
Paolo
^ permalink raw reply [flat|nested] 39+ messages in thread