* [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
2016-02-09 0:56 [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports York Sun
@ 2016-02-09 0:57 ` York Sun
2016-02-14 3:01 ` Bin Meng
2016-02-22 7:05 ` Huan Wang
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver York Sun
2016-02-09 21:19 ` [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports york sun
2 siblings, 2 replies; 10+ messages in thread
From: York Sun @ 2016-02-09 0:57 UTC (permalink / raw)
To: u-boot
Split duart configuration as device tree file. Move /chosen node
out of board commone device tree. Convert ls1021aqds nor and SD
configurations to driver model support (qspi already uses DM).
Enable ns16550 DM serial driver for nor configurations.
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Alison Wang <alison.wang@nxp.com>
CC: Bin Meng <bmeng.cn@gmail.com>
---
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/ls1021a-qds-duart.dts | 16 ++++++++++++++++
arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +--
configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++
configs/ls1021aqds_nor_defconfig | 4 ++++
configs/ls1021aqds_qspi_defconfig | 2 +-
configs/ls1021aqds_sdcard_defconfig | 3 +++
include/configs/ls1021aqds.h | 2 ++
8 files changed, 32 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts
rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0fa5796..ef58aec 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -94,7 +94,7 @@ dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb
dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
-dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
+dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb
diff --git a/arch/arm/dts/ls1021a-qds-duart.dts b/arch/arm/dts/ls1021a-qds-duart.dts
new file mode 100644
index 0000000..bc56867
--- /dev/null
+++ b/arch/arm/dts/ls1021a-qds-duart.dts
@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart0;
+ };
+};
diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dtsi
similarity index 98%
rename from arch/arm/dts/ls1021a-qds.dts
rename to arch/arm/dts/ls1021a-qds.dtsi
index e634292..ca9e835 100644
--- a/arch/arm/dts/ls1021a-qds.dts
+++ b/arch/arm/dts/ls1021a-qds.dtsi
@@ -1,12 +1,11 @@
/*
- * Freescale ls1021a QDS board device tree source
+ * Freescale ls1021a QDS board common device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
-/dts-v1/;
#include "ls1021a.dtsi"
/ {
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index 2f16339..842f645 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index 6878df4..f4c81e2 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -1,6 +1,10 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index 0f740fd..2e98d6c 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds"
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_defconfig
index 3249b48..e283f69 100644
--- a/configs/ls1021aqds_sdcard_defconfig
+++ b/configs/ls1021aqds_sdcard_defconfig
@@ -1,8 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index f6efc55..5bdc124 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -375,7 +375,9 @@ unsigned long get_board_ddr_clk(void);
#else
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
+#endif
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support York Sun
@ 2016-02-14 3:01 ` Bin Meng
2016-02-22 7:05 ` Huan Wang
1 sibling, 0 replies; 10+ messages in thread
From: Bin Meng @ 2016-02-14 3:01 UTC (permalink / raw)
To: u-boot
On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york.sun@nxp.com> wrote:
> Split duart configuration as device tree file. Move /chosen node
> out of board commone device tree. Convert ls1021aqds nor and SD
> configurations to driver model support (qspi already uses DM).
> Enable ns16550 DM serial driver for nor configurations.
>
> Signed-off-by: York Sun <york.sun@nxp.com>
> CC: Alison Wang <alison.wang@nxp.com>
> CC: Bin Meng <bmeng.cn@gmail.com>
> ---
>
> arch/arm/dts/Makefile | 2 +-
> arch/arm/dts/ls1021a-qds-duart.dts | 16 ++++++++++++++++
> arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +--
> configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++
> configs/ls1021aqds_nor_defconfig | 4 ++++
> configs/ls1021aqds_qspi_defconfig | 2 +-
> configs/ls1021aqds_sdcard_defconfig | 3 +++
> include/configs/ls1021aqds.h | 2 ++
> 8 files changed, 32 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts
> rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support York Sun
2016-02-14 3:01 ` Bin Meng
@ 2016-02-22 7:05 ` Huan Wang
1 sibling, 0 replies; 10+ messages in thread
From: Huan Wang @ 2016-02-22 7:05 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: York Sun [mailto:york.sun at nxp.com]
> Sent: Tuesday, February 09, 2016 8:57 AM
> To: u-boot at lists.denx.de
> Cc: jteki at openedev.com; sjg at chromium.org; yamada.masahiro at socionext.com;
> lokeshvutla at ti.com; bmeng.cn at gmail.com; ijc at hellion.org.uk;
> hdegoede at redhat.com; albert.u.boot at aribaud.net; sr at denx.de;
> alison.wang at freescale.com; york sun; Huan Wang
> Subject: [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and
> enable serial support
>
> Split duart configuration as device tree file. Move /chosen node out of
> board commone device tree. Convert ls1021aqds nor and SD configurations
> to driver model support (qspi already uses DM).
> Enable ns16550 DM serial driver for nor configurations.
>
> Signed-off-by: York Sun <york.sun@nxp.com>
> CC: Alison Wang <alison.wang@nxp.com>
> CC: Bin Meng <bmeng.cn@gmail.com>
> ---
>
> arch/arm/dts/Makefile | 2 +-
> arch/arm/dts/ls1021a-qds-duart.dts | 16
> ++++++++++++++++
> arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +--
> configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++
> configs/ls1021aqds_nor_defconfig | 4 ++++
> configs/ls1021aqds_qspi_defconfig | 2 +-
> configs/ls1021aqds_sdcard_defconfig | 3 +++
> include/configs/ls1021aqds.h | 2 ++
> 8 files changed, 32 insertions(+), 4 deletions(-) create mode 100644
> arch/arm/dts/ls1021a-qds-duart.dts
> rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
2016-02-09 0:56 [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports York Sun
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support York Sun
@ 2016-02-09 0:57 ` York Sun
2016-02-14 3:01 ` Bin Meng
2016-02-09 21:19 ` [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports york sun
2 siblings, 1 reply; 10+ messages in thread
From: York Sun @ 2016-02-09 0:57 UTC (permalink / raw)
To: u-boot
Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart
to driver model suport. Enable lpuart port driver.
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Alison Wang <alison.wang@nxp.com>
CC: Bin Meng <bmeng.cn@gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
4 files changed, 25 insertions(+)
create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ef58aec..c27b80c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
+ ls1021a-qds-lpuart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb
diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts b/arch/arm/dts/ls1021a-qds-lpuart.dts
new file mode 100644
index 0000000..1d16ffd
--- /dev/null
+++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &lpuart0;
+ };
+};
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 44b2a0d..ffac6dd 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 1186af2..e81448d 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
CONFIG_SYS_EXTRA_OPTIONS="LPUART"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_LPUART=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver York Sun
@ 2016-02-14 3:01 ` Bin Meng
2016-02-22 7:07 ` Huan Wang
0 siblings, 1 reply; 10+ messages in thread
From: Bin Meng @ 2016-02-14 3:01 UTC (permalink / raw)
To: u-boot
Hi York,
On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york.sun@nxp.com> wrote:
> Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart
> to driver model suport. Enable lpuart port driver.
>
> Signed-off-by: York Sun <york.sun@nxp.com>
> CC: Alison Wang <alison.wang@nxp.com>
> CC: Bin Meng <bmeng.cn@gmail.com>
>
> ---
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
> configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
> 4 files changed, 25 insertions(+)
> create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ef58aec..c27b80c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
> dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
>
> dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
> + ls1021a-qds-lpuart.dtb \
> ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
> dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
> fsl-ls2080a-rdb.dtb
> diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts b/arch/arm/dts/ls1021a-qds-lpuart.dts
> new file mode 100644
> index 0000000..1d16ffd
> --- /dev/null
> +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
> @@ -0,0 +1,16 @@
> +/*
> + * Freescale ls1021a QDS board common device tree source
> + *
> + * Copyright 2013-2015 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +/dts-v1/;
> +#include "ls1021a-qds.dtsi"
> +
> +/ {
> + chosen {
> + stdout-path = &lpuart0;
> + };
> +};
> diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> index 44b2a0d..ffac6dd 100644
> --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> @@ -1,7 +1,11 @@
> CONFIG_ARM=y
> CONFIG_TARGET_LS1021AQDS=y
> CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
> +CONFIG_DM_SERIAL=y
> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
I believe this should be "ls1021a-qds-lpuart"?
> # CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM=y
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> CONFIG_FSL_LPUART=y
> diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
> index 1186af2..e81448d 100644
> --- a/configs/ls1021aqds_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_nor_lpuart_defconfig
> @@ -1,7 +1,11 @@
> CONFIG_ARM=y
> CONFIG_TARGET_LS1021AQDS=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
> CONFIG_SYS_EXTRA_OPTIONS="LPUART"
> # CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM=y
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> CONFIG_FSL_LPUART=y
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
2016-02-14 3:01 ` Bin Meng
@ 2016-02-22 7:07 ` Huan Wang
2016-02-22 17:19 ` york sun
0 siblings, 1 reply; 10+ messages in thread
From: Huan Wang @ 2016-02-22 7:07 UTC (permalink / raw)
To: u-boot
Hi, York,
> On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york.sun@nxp.com> wrote:
> > Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver
> > model suport. Enable lpuart port driver.
> >
> > Signed-off-by: York Sun <york.sun@nxp.com>
> > CC: Alison Wang <alison.wang@nxp.com>
> > CC: Bin Meng <bmeng.cn@gmail.com>
> >
> > ---
> >
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
> > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
> > configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
> > 4 files changed, 25 insertions(+)
> > create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
> > ef58aec..c27b80c 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) +=
> > am57xx-beagle-x15.dtb
> > dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
> >
> > dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
> > + ls1021a-qds-lpuart.dtb \
> > ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
> > dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
> > fsl-ls2080a-rdb.dtb
> > diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts
> > b/arch/arm/dts/ls1021a-qds-lpuart.dts
> > new file mode 100644
> > index 0000000..1d16ffd
> > --- /dev/null
> > +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
> > @@ -0,0 +1,16 @@
> > +/*
> > + * Freescale ls1021a QDS board common device tree source
> > + *
> > + * Copyright 2013-2015 Freescale Semiconductor, Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +/dts-v1/;
> > +#include "ls1021a-qds.dtsi"
> > +
> > +/ {
> > + chosen {
> > + stdout-path = &lpuart0;
> > + };
> > +};
> > diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > index 44b2a0d..ffac6dd 100644
> > --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > @@ -1,7 +1,11 @@
> > CONFIG_ARM=y
> > CONFIG_TARGET_LS1021AQDS=y
> > CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
> > +CONFIG_DM_SERIAL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
>
> I believe this should be "ls1021a-qds-lpuart"?
>
> > # CONFIG_CMD_SETEXPR is not set
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_DM=y
> > CONFIG_NETDEVICES=y
> > CONFIG_E1000=y
> > CONFIG_FSL_LPUART=y
> > diff --git a/configs/ls1021aqds_nor_lpuart_defconfig
> > b/configs/ls1021aqds_nor_lpuart_defconfig
> > index 1186af2..e81448d 100644
> > --- a/configs/ls1021aqds_nor_lpuart_defconfig
> > +++ b/configs/ls1021aqds_nor_lpuart_defconfig
> > @@ -1,7 +1,11 @@
> > CONFIG_ARM=y
> > CONFIG_TARGET_LS1021AQDS=y
> > +CONFIG_DM_SERIAL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
> > CONFIG_SYS_EXTRA_OPTIONS="LPUART"
> > # CONFIG_CMD_SETEXPR is not set
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_DM=y
> > CONFIG_NETDEVICES=y
> > CONFIG_E1000=y
> > CONFIG_FSL_LPUART=y
> > --
>
[Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.
BTW, I tested this set on LS1021AQDS board with that little modification about the comment.
Best Regards,
Alison Wang
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
2016-02-22 7:07 ` Huan Wang
@ 2016-02-22 17:19 ` york sun
0 siblings, 0 replies; 10+ messages in thread
From: york sun @ 2016-02-22 17:19 UTC (permalink / raw)
To: u-boot
On 02/21/2016 11:07 PM, Huan Wang wrote:
> Hi, York,
>
>> On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york.sun@nxp.com> wrote:
>>> Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver
>>> model suport. Enable lpuart port driver.
>>>
>>> Signed-off-by: York Sun <york.sun@nxp.com>
>>> CC: Alison Wang <alison.wang@nxp.com>
>>> CC: Bin Meng <bmeng.cn@gmail.com>
>>>
>>> ---
>>>
>>> arch/arm/dts/Makefile | 1 +
>>> arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
>>> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
>>> configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
>>> 4 files changed, 25 insertions(+)
>>> create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
>>>
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
>>> ef58aec..c27b80c 100644
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) +=
>>> am57xx-beagle-x15.dtb
>>> dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
>>>
>>> dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
>>> + ls1021a-qds-lpuart.dtb \
>>> ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
>>> dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
>>> fsl-ls2080a-rdb.dtb
>>> diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> b/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> new file mode 100644
>>> index 0000000..1d16ffd
>>> --- /dev/null
>>> +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> @@ -0,0 +1,16 @@
>>> +/*
>>> + * Freescale ls1021a QDS board common device tree source
>>> + *
>>> + * Copyright 2013-2015 Freescale Semiconductor, Inc.
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "ls1021a-qds.dtsi"
>>> +
>>> +/ {
>>> + chosen {
>>> + stdout-path = &lpuart0;
>>> + };
>>> +};
>>> diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> index 44b2a0d..ffac6dd 100644
>>> --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> @@ -1,7 +1,11 @@
>>> CONFIG_ARM=y
>>> CONFIG_TARGET_LS1021AQDS=y
>>> CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
>>
>> I believe this should be "ls1021a-qds-lpuart"?
>>
>>> # CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_DM=y
>>> CONFIG_NETDEVICES=y
>>> CONFIG_E1000=y
>>> CONFIG_FSL_LPUART=y
>>> diff --git a/configs/ls1021aqds_nor_lpuart_defconfig
>>> b/configs/ls1021aqds_nor_lpuart_defconfig
>>> index 1186af2..e81448d 100644
>>> --- a/configs/ls1021aqds_nor_lpuart_defconfig
>>> +++ b/configs/ls1021aqds_nor_lpuart_defconfig
>>> @@ -1,7 +1,11 @@
>>> CONFIG_ARM=y
>>> CONFIG_TARGET_LS1021AQDS=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
>>> CONFIG_SYS_EXTRA_OPTIONS="LPUART"
>>> # CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_DM=y
>>> CONFIG_NETDEVICES=y
>>> CONFIG_E1000=y
>>> CONFIG_FSL_LPUART=y
>>> --
>>
> [Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.
>
> BTW, I tested this set on LS1021AQDS board with that little modification about the comment.
>
Thanks. I will send out an update.
York
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports
2016-02-09 0:56 [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports York Sun
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support York Sun
2016-02-09 0:57 ` [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver York Sun
@ 2016-02-09 21:19 ` york sun
2016-02-22 5:47 ` Huan Wang
2 siblings, 1 reply; 10+ messages in thread
From: york sun @ 2016-02-09 21:19 UTC (permalink / raw)
To: u-boot
On 02/08/2016 04:57 PM, York Sun wrote:
> Since a recent merge 5160def "dm: lpuart: Drop the legacy code",
> ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to
> compile because they are using legacy driver for lpuart. Following
> ls1021atwr, ls1021aqds should be converted as well.
>
> Not tested on boards yet. Serial DM driver is not enabled for SD
> and QSPI configuration.
>
>
> York Sun (2):
> arm: ls1021aqds: Convert to driver model and enable serial support
> arm: ls1021aqds: Enable driver model lpuart serial driver
>
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/ls1021a-qds-duart.dts | 16 ++++++++++++++++
> arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
> arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +--
> configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++
> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
> configs/ls1021aqds_nor_defconfig | 4 ++++
> configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
> configs/ls1021aqds_qspi_defconfig | 2 +-
> configs/ls1021aqds_sdcard_defconfig | 3 +++
> include/configs/ls1021aqds.h | 2 ++
> 11 files changed, 57 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts
> create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
> rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
>
Alison,
Please review this set when you come back. I could only test NOR boot on the
remote board.
York
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports
2016-02-09 21:19 ` [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports york sun
@ 2016-02-22 5:47 ` Huan Wang
0 siblings, 0 replies; 10+ messages in thread
From: Huan Wang @ 2016-02-22 5:47 UTC (permalink / raw)
To: u-boot
Hi, York,
> On 02/08/2016 04:57 PM, York Sun wrote:
> > Since a recent merge 5160def "dm: lpuart: Drop the legacy code",
> > ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to compile
> > because they are using legacy driver for lpuart. Following ls1021atwr,
> > ls1021aqds should be converted as well.
> >
> > Not tested on boards yet. Serial DM driver is not enabled for SD and
> > QSPI configuration.
> >
> >
> > York Sun (2):
> > arm: ls1021aqds: Convert to driver model and enable serial support
> > arm: ls1021aqds: Enable driver model lpuart serial driver
> >
> > arch/arm/dts/Makefile | 3 ++-
> > arch/arm/dts/ls1021a-qds-duart.dts | 16
> ++++++++++++++++
> > arch/arm/dts/ls1021a-qds-lpuart.dts | 16
> ++++++++++++++++
> > arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +--
> > configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++
> > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
> > configs/ls1021aqds_nor_defconfig | 4 ++++
> > configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
> > configs/ls1021aqds_qspi_defconfig | 2 +-
> > configs/ls1021aqds_sdcard_defconfig | 3 +++
> > include/configs/ls1021aqds.h | 2 ++
> > 11 files changed, 57 insertions(+), 4 deletions(-) create mode
> > 100644 arch/arm/dts/ls1021a-qds-duart.dts
> > create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
> > rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
> >
>
> Alison,
>
> Please review this set when you come back. I could only test NOR boot on
> the remote board.
>
[Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.
BTW, I tested this set on LS1021AQDS board with that little modification.
Best Regards,
Alison Wang
^ permalink raw reply [flat|nested] 10+ messages in thread