All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] net: eth_designware: select PHYLIB in Kconfig
Date: Mon, 7 Dec 2015 17:33:43 +0800	[thread overview]
Message-ID: <CAEUhbmX_Waw-6sZfD=CCGSxaX=Lj8m8LaoCREmXipNFb=kB4aA@mail.gmail.com> (raw)
In-Reply-To: <1449407996-4062-1-git-send-email-thomas@wytron.com.tw>

On Sun, Dec 6, 2015 at 9:19 PM, Thomas Chou <thomas@wytron.com.tw> wrote:
> Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
> from legacy board header files.
>
> This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
> are selected.
>
> Reported-by: Pavel Machek <pavel@denx.de>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
>  drivers/net/Kconfig              | 1 +
>  include/configs/axs101.h         | 1 -
>  include/configs/bf609-ezkit.h    | 1 -
>  include/configs/galileo.h        | 1 -
>  include/configs/socfpga_common.h | 1 -
>  include/configs/spear-common.h   | 1 -
>  include/configs/stv0991.h        | 1 -
>  include/configs/sunxi-common.h   | 1 -
>  include/configs/tb100.h          | 1 -
>  include/configs/x600.h           | 1 -
>  10 files changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index a03a95d..4b04d09 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW
>
>  config ETH_DESIGNWARE
>         bool "Synopsys Designware Ethernet MAC"
> +       select PHYLIB
>         help
>           This MAC is present in SoCs from various vendors. It supports
>           100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
> diff --git a/include/configs/axs101.h b/include/configs/axs101.h
> index 650d97d..eeb2ae6 100644
> --- a/include/configs/axs101.h
> +++ b/include/configs/axs101.h
> @@ -95,7 +95,6 @@
>  /*
>   * Ethernet PHY configuration
>   */
> -#define CONFIG_PHYLIB
>  #define CONFIG_MII
>  #define CONFIG_PHY_GIGE
>
> diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
> index 0e353b9..b5d4847 100644
> --- a/include/configs/bf609-ezkit.h
> +++ b/include/configs/bf609-ezkit.h
> @@ -75,7 +75,6 @@
>  #define CONFIG_DW_ALTDESCRIPTOR
>  #define CONFIG_CMD_MII
>  #define CONFIG_MII
> -#define CONFIG_PHYLIB
>
>  /* i2c Settings */
>  #define CONFIG_SYS_I2C
> diff --git a/include/configs/galileo.h b/include/configs/galileo.h
> index eb16a5e..14a42b1 100644
> --- a/include/configs/galileo.h
> +++ b/include/configs/galileo.h
> @@ -45,7 +45,6 @@
>  /* 10/100M Ethernet support */
>  #define CONFIG_DESIGNWARE_ETH
>  #define CONFIG_DW_ALTDESCRIPTOR
> -#define CONFIG_PHYLIB
>
>  /* Environment configuration */
>  #define CONFIG_ENV_SECT_SIZE           0x1000
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index b3f65b6..86eccba 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -105,7 +105,6 @@
>  #define CONFIG_DW_ALTDESCRIPTOR
>  #define CONFIG_MII
>  #define CONFIG_AUTONEG_TIMEOUT         (15 * CONFIG_SYS_HZ)
> -#define CONFIG_PHYLIB
>  #define CONFIG_PHY_GIGE
>  #endif
>
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> index 1d69477..d2630f4 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -17,7 +17,6 @@
>
>  /* Ethernet driver configuration */
>  #define CONFIG_MII
> -#define CONFIG_PHYLIB
>  #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
>  #define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
>
> diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
> index 14c6a9e..f421321 100644
> --- a/include/configs/stv0991.h
> +++ b/include/configs/stv0991.h
> @@ -53,7 +53,6 @@
>  /* GMAC related configs */
>
>  #define CONFIG_MII
> -#define CONFIG_PHYLIB
>  #define CONFIG_DW_ALTDESCRIPTOR
>  #define CONFIG_PHY_MICREL
>
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 98a2c74..31a68ac 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -312,7 +312,6 @@ extern int soft_i2c_gpio_scl;
>  #define CONFIG_PHY_GIGE                        /* GMAC can use gigabit PHY     */
>  #define CONFIG_PHY_ADDR                1
>  #define CONFIG_MII                     /* MII PHY management           */
> -#define CONFIG_PHYLIB
>  #endif
>
>  #ifdef CONFIG_USB_EHCI_HCD
> diff --git a/include/configs/tb100.h b/include/configs/tb100.h
> index 8660ed4..e06484f 100644
> --- a/include/configs/tb100.h
> +++ b/include/configs/tb100.h
> @@ -42,7 +42,6 @@
>  /*
>   * Ethernet PHY configuration
>   */
> -#define CONFIG_PHYLIB
>  #define CONFIG_PHY_GIGE
>
>  /*
> diff --git a/include/configs/x600.h b/include/configs/x600.h
> index 58f1aca..0263c50 100644
> --- a/include/configs/x600.h
> +++ b/include/configs/x600.h
> @@ -77,7 +77,6 @@
>
>  /* Ethernet config options */
>  #define CONFIG_MII
> -#define CONFIG_PHYLIB
>  #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
>  #define CONFIG_PHY_ADDR                0       /* PHY address */
>  #define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
> --

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

  parent reply	other threads:[~2015-12-07  9:33 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-06 13:19 [U-Boot] [PATCH] net: eth_designware: select PHYLIB in Kconfig Thomas Chou
2015-12-06 18:52 ` Marek Vasut
2015-12-07  6:37   ` Thomas Chou
2015-12-07  1:50 ` Bin Meng
2015-12-07  6:35   ` Thomas Chou
2015-12-07  9:32     ` Bin Meng
2015-12-07  6:09 ` Chin Liang See
2015-12-07  7:59 ` Pavel Machek
2015-12-07  9:33 ` Bin Meng [this message]
2015-12-07 12:53 ` [U-Boot] [PATCH v2] " Thomas Chou
2015-12-19  3:56   ` Thomas Chou
2015-12-19  5:47     ` Marek Vasut
2015-12-19  8:24       ` Thomas Chou
2015-12-21 14:20         ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEUhbmX_Waw-6sZfD=CCGSxaX=Lj8m8LaoCREmXipNFb=kB4aA@mail.gmail.com' \
    --to=bmeng.cn@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.