* [U-Boot] U-boot for MPC8280 Processor
@ 2012-03-13 8:16 srujan varma
2012-03-13 20:16 ` Scott Wood
0 siblings, 1 reply; 2+ messages in thread
From: srujan varma @ 2012-03-13 8:16 UTC (permalink / raw)
To: u-boot
Hi all,
I am presently working on MPC8280 processor, can any one please send me the
MPC8280 code for u-boot. I already tried to modify MPC8260 code but my
board is not booting up.
Regards
Srujan
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] U-boot for MPC8280 Processor
2012-03-13 8:16 [U-Boot] U-boot for MPC8280 Processor srujan varma
@ 2012-03-13 20:16 ` Scott Wood
0 siblings, 0 replies; 2+ messages in thread
From: Scott Wood @ 2012-03-13 20:16 UTC (permalink / raw)
To: u-boot
On 03/13/2012 03:16 AM, srujan varma wrote:
> Hi all,
>
> I am presently working on MPC8280 processor, can any one please send me the
> MPC8280 code for u-boot. I already tried to modify MPC8260 code but my
> board is not booting up.
It is already supported by arch/powerpc/cpu/mpc8260, e.g. the PQ2FADS
target.
I'm not sure if it's been tested recently, though.
-Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-13 20:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-13 8:16 [U-Boot] U-boot for MPC8280 Processor srujan varma
2012-03-13 20:16 ` Scott Wood
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.