* 3.18 xen-pcifront regression?
@ 2015-03-24 15:14 Michael D Labriola
2015-03-24 15:28 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 13+ messages in thread
From: Michael D Labriola @ 2015-03-24 15:14 UTC (permalink / raw)
To: xen-devel; +Cc: Stuart Wehrly, michael.d.labriola, Jayson A Dyke
I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
through. It only seems to be the domU kernel that's upset (i.e., Behavior
is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
following Oops when trying to boot my domU with a couple PCI cards passed
through:
BUG: unable to handle kernel paging request at 0030303e
IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
*pdpt = 00000000019f1027 *pde = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
task: cb869950 ti: cb8ae000 task.ti: cb8ae000
EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
EIP is at acpi_ns_validate_handle+0x12/0x1a
EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
Stack:
c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
Call Trace:
[<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
[<c096a21d>] ? resume_kernel+0x5/0x7
[<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
[<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
[<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
[<c0699d34>] ? pci_device_add+0x24/0x450
[<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
[<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
[<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
[<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
[<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
[<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
[<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
[<c070dd0f>] ? xenbus_gather+0x5f/0x90
[<c070dd0f>] ? xenbus_gather+0x5f/0x90
[<c070c393>] ? xenbus_read_driver_state+0x33/0x50
[<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
[<c0710a5f>] ? backend_changed+0xf/0x20
[<c070d712>] ? xenwatch_thread+0x72/0x110
[<c0486140>] ? bit_waitqueue+0x50/0x50
[<c070d6a0>] ? join+0x70/0x70
[<c046e59b>] ? kthread+0xab/0xd0
[<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
[<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
CR2: 000000000030303e
---[ end trace d4ddeb038cbcbdf7 ]---
I've bisected down to the following commit in 3.18, which breaks my
system.
6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Aug 27 14:29:47 2014 -0600
PCI: Add pci_configure_device() during enumeration
Some platforms can tell the OS how to configure PCI devices, e.g., how
to
set cache line size, error reporting enables, etc. ACPI defines _HPP
and
_HPX methods for this purpose.
This configuration was previously done by some of the hotplug drivers
using
pci_configure_slot(). But not all hotplug drivers did this, and per
the
spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
configured by the BIOS at system boot."
Move this configuration into the PCI core by adding
pci_configure_device()
and calling it from pci_device_add(), so we do this for all devices as
we
enumerate them.
This is based on pci_configure_slot(), which is used by hotplug
drivers.
I omitted:
- pcie_bus_configure_settings() because it configures MPS and MRRS,
which
requires global knowledge of the fabric and must be done later,
and
- configuration of subordinate devices; that will happen when we
call
pci_device_add() for those devices.
Because pci_configure_slot() was only done by hotplug drivers, this
initial
version of pci_configure_device() only configures hot-added devices,
ignoring anything added during boot.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
:040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
I've reverted that commit on top of 3.19, which feels incredibly wrong,
but does fix the problem on my system. This is a little over my head,
though... ;-)
Thoughts?
---
Michael D Labriola
Electric Boat
mlabriol@gdeb.com
401-848-8871 (desk)
401-848-8513 (lab)
401-316-9844 (cell)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-24 15:14 3.18 xen-pcifront regression? Michael D Labriola
@ 2015-03-24 15:28 ` Konrad Rzeszutek Wilk
2015-03-24 17:27 ` Bjorn Helgaas
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
0 siblings, 2 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2015-03-24 15:28 UTC (permalink / raw)
To: Michael D Labriola, bhelgaas
Cc: xen-devel, michael.d.labriola, Jayson A Dyke, Stuart Wehrly
On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
> through. It only seems to be the domU kernel that's upset (i.e., Behavior
> is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
> dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> following Oops when trying to boot my domU with a couple PCI cards passed
> through:
>
> BUG: unable to handle kernel paging request at 0030303e
> IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> *pdpt = 00000000019f1027 *pde = 0000000000000000
> Oops: 0000 [#1] PREEMPT SMP
> Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> EIP is at acpi_ns_validate_handle+0x12/0x1a
> EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> Stack:
> c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
> 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
> 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
> Call Trace:
> [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
We should not be calling in any acpi code in PV domU guests.
WE actually disable it (acpi=0) to make sure we don't call it - as
there is no ACPI AML data at all in the guest.
CC-ing Bjorn.
> [<c096a21d>] ? resume_kernel+0x5/0x7
> [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> [<c0699d34>] ? pci_device_add+0x24/0x450
> [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> [<c0710a5f>] ? backend_changed+0xf/0x20
> [<c070d712>] ? xenwatch_thread+0x72/0x110
> [<c0486140>] ? bit_waitqueue+0x50/0x50
> [<c070d6a0>] ? join+0x70/0x70
> [<c046e59b>] ? kthread+0xab/0xd0
> [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
> 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
> 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
> CR2: 000000000030303e
> ---[ end trace d4ddeb038cbcbdf7 ]---
>
>
> I've bisected down to the following commit in 3.18, which breaks my
> system.
>
> 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Wed Aug 27 14:29:47 2014 -0600
>
> PCI: Add pci_configure_device() during enumeration
>
> Some platforms can tell the OS how to configure PCI devices, e.g., how
> to
> set cache line size, error reporting enables, etc. ACPI defines _HPP
> and
> _HPX methods for this purpose.
>
> This configuration was previously done by some of the hotplug drivers
> using
> pci_configure_slot(). But not all hotplug drivers did this, and per
> the
> spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
> configured by the BIOS at system boot."
>
> Move this configuration into the PCI core by adding
> pci_configure_device()
> and calling it from pci_device_add(), so we do this for all devices as
> we
> enumerate them.
>
> This is based on pci_configure_slot(), which is used by hotplug
> drivers.
> I omitted:
>
> - pcie_bus_configure_settings() because it configures MPS and MRRS,
> which
> requires global knowledge of the fabric and must be done later,
> and
>
> - configuration of subordinate devices; that will happen when we
> call
> pci_device_add() for those devices.
>
> Because pci_configure_slot() was only done by hotplug drivers, this
> initial
> version of pci_configure_device() only configures hot-added devices,
> ignoring anything added during boot.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Acked-by: Yinghai Lu <yinghai@kernel.org>
>
> :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
>
>
> I've reverted that commit on top of 3.19, which feels incredibly wrong,
> but does fix the problem on my system. This is a little over my head,
> though... ;-)
>
> Thoughts?
>
> ---
> Michael D Labriola
> Electric Boat
> mlabriol@gdeb.com
> 401-848-8871 (desk)
> 401-848-8513 (lab)
> 401-316-9844 (cell)
>
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xen-devel] 3.18 xen-pcifront regression?
2015-03-24 15:28 ` Konrad Rzeszutek Wilk
2015-03-24 17:27 ` Bjorn Helgaas
@ 2015-03-24 17:27 ` Bjorn Helgaas
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
` (2 more replies)
1 sibling, 3 replies; 13+ messages in thread
From: Bjorn Helgaas @ 2015-03-24 17:27 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: Michael D Labriola, xen-devel, Stuart Wehrly, michael.d.labriola,
Jayson A Dyke, Rafael J. Wysocki, linux-pci, linux-acpi
[+cc Rafael, linux-pci, linux-acpi]
On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
> > through. It only seems to be the domU kernel that's upset (i.e., Behavior
> > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
> > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > following Oops when trying to boot my domU with a couple PCI cards passed
> > through:
> >
> > BUG: unable to handle kernel paging request at 0030303e
> > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > Oops: 0000 [#1] PREEMPT SMP
> > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > Stack:
> > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
> > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
> > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
> > Call Trace:
> > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
>
> We should not be calling in any acpi code in PV domU guests.
>
> WE actually disable it (acpi=0) to make sure we don't call it - as
> there is no ACPI AML data at all in the guest.
>
> CC-ing Bjorn.
> > [<c096a21d>] ? resume_kernel+0x5/0x7
> > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > [<c0699d34>] ? pci_device_add+0x24/0x450
> > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > [<c0710a5f>] ? backend_changed+0xf/0x20
> > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > [<c070d6a0>] ? join+0x70/0x70
> > [<c046e59b>] ? kthread+0xab/0xd0
> > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
> > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
> > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
> > CR2: 000000000030303e
> > ---[ end trace d4ddeb038cbcbdf7 ]---
> >
> >
> > I've bisected down to the following commit in 3.18, which breaks my
> > system.
> >
> > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > Author: Bjorn Helgaas <bhelgaas@google.com>
> > Date: Wed Aug 27 14:29:47 2014 -0600
> >
> > PCI: Add pci_configure_device() during enumeration
> >
> > Some platforms can tell the OS how to configure PCI devices, e.g., how
> > to
> > set cache line size, error reporting enables, etc. ACPI defines _HPP
> > and
> > _HPX methods for this purpose.
> >
> > This configuration was previously done by some of the hotplug drivers
> > using
> > pci_configure_slot(). But not all hotplug drivers did this, and per
> > the
> > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
> > configured by the BIOS at system boot."
> >
> > Move this configuration into the PCI core by adding
> > pci_configure_device()
> > and calling it from pci_device_add(), so we do this for all devices as
> > we
> > enumerate them.
> >
> > This is based on pci_configure_slot(), which is used by hotplug
> > drivers.
> > I omitted:
> >
> > - pcie_bus_configure_settings() because it configures MPS and MRRS,
> > which
> > requires global knowledge of the fabric and must be done later,
> > and
> >
> > - configuration of subordinate devices; that will happen when we
> > call
> > pci_device_add() for those devices.
> >
> > Because pci_configure_slot() was only done by hotplug drivers, this
> > initial
> > version of pci_configure_device() only configures hot-added devices,
> > ignoring anything added during boot.
> >
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > Acked-by: Yinghai Lu <yinghai@kernel.org>
> >
> > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> >
> >
> > I've reverted that commit on top of 3.19, which feels incredibly wrong,
> > but does fix the problem on my system. This is a little over my head,
> > though... ;-)
> >
> > Thoughts?
Thanks for the report, Michael, and sorry for the inconvenience. I think
the patch below will fix it, but I don't think it's the right fix either
because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
around like fairy dust. I wonder if we can set things up so ACPI methods
would fail gracefully like they do when ACPI is disabled at compile-time.
I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
device handles, we just get NULL pointers, so everything works out even
without a fix like the one below.
There must be something different about the way things get set up in that
domU kernel. I'll try to look into that some more, but I'm going on
vacation for the next week, so if you learn anything before then, let me
know.
Bjorn
commit 6678b0fb6504c890481863b4916089b41e6042bf
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Tue Mar 24 11:12:45 2015 -0500
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
(_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
disabled at runtime, e.g., with "acpi=off", this causes an oops because
there's no AML at all.
Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
we only used pci_get_hp_params() for hot-added devices, but after it, we
use it for all devices, so we're much more likely to see the oops.
Don't bother looking for ACPI configuration information if ACPI has been
disabled.
Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
Reported-by: Michael D Labriola <mlabriol@gdeb.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.18+
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 489063987325..c93fbe76d281 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
acpi_handle handle, phandle;
struct pci_bus *pbus;
+ if (acpi_pci_disabled)
+ return -ENODEV;
+
handle = NULL;
for (pbus = dev->bus; pbus; pbus = pbus->parent) {
handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-24 15:28 ` Konrad Rzeszutek Wilk
@ 2015-03-24 17:27 ` Bjorn Helgaas
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
1 sibling, 0 replies; 13+ messages in thread
From: Bjorn Helgaas @ 2015-03-24 17:27 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: Jayson A Dyke, Stuart Wehrly, michael.d.labriola,
Rafael J. Wysocki, linux-acpi, Michael D Labriola, linux-pci,
xen-devel
[+cc Rafael, linux-pci, linux-acpi]
On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
> > through. It only seems to be the domU kernel that's upset (i.e., Behavior
> > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
> > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > following Oops when trying to boot my domU with a couple PCI cards passed
> > through:
> >
> > BUG: unable to handle kernel paging request at 0030303e
> > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > Oops: 0000 [#1] PREEMPT SMP
> > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > Stack:
> > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
> > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
> > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
> > Call Trace:
> > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
>
> We should not be calling in any acpi code in PV domU guests.
>
> WE actually disable it (acpi=0) to make sure we don't call it - as
> there is no ACPI AML data at all in the guest.
>
> CC-ing Bjorn.
> > [<c096a21d>] ? resume_kernel+0x5/0x7
> > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > [<c0699d34>] ? pci_device_add+0x24/0x450
> > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > [<c0710a5f>] ? backend_changed+0xf/0x20
> > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > [<c070d6a0>] ? join+0x70/0x70
> > [<c046e59b>] ? kthread+0xab/0xd0
> > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
> > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
> > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
> > CR2: 000000000030303e
> > ---[ end trace d4ddeb038cbcbdf7 ]---
> >
> >
> > I've bisected down to the following commit in 3.18, which breaks my
> > system.
> >
> > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > Author: Bjorn Helgaas <bhelgaas@google.com>
> > Date: Wed Aug 27 14:29:47 2014 -0600
> >
> > PCI: Add pci_configure_device() during enumeration
> >
> > Some platforms can tell the OS how to configure PCI devices, e.g., how
> > to
> > set cache line size, error reporting enables, etc. ACPI defines _HPP
> > and
> > _HPX methods for this purpose.
> >
> > This configuration was previously done by some of the hotplug drivers
> > using
> > pci_configure_slot(). But not all hotplug drivers did this, and per
> > the
> > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
> > configured by the BIOS at system boot."
> >
> > Move this configuration into the PCI core by adding
> > pci_configure_device()
> > and calling it from pci_device_add(), so we do this for all devices as
> > we
> > enumerate them.
> >
> > This is based on pci_configure_slot(), which is used by hotplug
> > drivers.
> > I omitted:
> >
> > - pcie_bus_configure_settings() because it configures MPS and MRRS,
> > which
> > requires global knowledge of the fabric and must be done later,
> > and
> >
> > - configuration of subordinate devices; that will happen when we
> > call
> > pci_device_add() for those devices.
> >
> > Because pci_configure_slot() was only done by hotplug drivers, this
> > initial
> > version of pci_configure_device() only configures hot-added devices,
> > ignoring anything added during boot.
> >
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > Acked-by: Yinghai Lu <yinghai@kernel.org>
> >
> > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> >
> >
> > I've reverted that commit on top of 3.19, which feels incredibly wrong,
> > but does fix the problem on my system. This is a little over my head,
> > though... ;-)
> >
> > Thoughts?
Thanks for the report, Michael, and sorry for the inconvenience. I think
the patch below will fix it, but I don't think it's the right fix either
because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
around like fairy dust. I wonder if we can set things up so ACPI methods
would fail gracefully like they do when ACPI is disabled at compile-time.
I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
device handles, we just get NULL pointers, so everything works out even
without a fix like the one below.
There must be something different about the way things get set up in that
domU kernel. I'll try to look into that some more, but I'm going on
vacation for the next week, so if you learn anything before then, let me
know.
Bjorn
commit 6678b0fb6504c890481863b4916089b41e6042bf
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Tue Mar 24 11:12:45 2015 -0500
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
(_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
disabled at runtime, e.g., with "acpi=off", this causes an oops because
there's no AML at all.
Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
we only used pci_get_hp_params() for hot-added devices, but after it, we
use it for all devices, so we're much more likely to see the oops.
Don't bother looking for ACPI configuration information if ACPI has been
disabled.
Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
Reported-by: Michael D Labriola <mlabriol@gdeb.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.18+
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 489063987325..c93fbe76d281 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
acpi_handle handle, phandle;
struct pci_bus *pbus;
+ if (acpi_pci_disabled)
+ return -ENODEV;
+
handle = NULL;
for (pbus = dev->bus; pbus; pbus = pbus->parent) {
handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
@ 2015-03-24 22:27 ` Michael D Labriola
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
2015-03-25 20:27 ` Konrad Rzeszutek Wilk
2 siblings, 0 replies; 13+ messages in thread
From: Michael D Labriola @ 2015-03-24 22:27 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Jayson A Dyke, linux-pci, michael.d.labriola, Rafael J. Wysocki,
linux-acpi, Stuart Wehrly, xen-devel
Bjorn Helgaas <bhelgaas@google.com> wrote on 03/24/2015 01:27:02 PM:
> From: Bjorn Helgaas <bhelgaas@google.com>
> To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
> Cc: Michael D Labriola <mlabriol@gdeb.com>, xen-
> devel@lists.xenproject.org, Stuart Wehrly <swehrly@gdeb.com>,
> michael.d.labriola@gmail.com, Jayson A Dyke <jdyke@gdeb.com>, "Rafael
> J. Wysocki" <rjw@rjwysocki.net>, linux-pci@vger.kernel.org, linux-
> acpi@vger.kernel.org
> Date: 03/24/2015 01:29 PM
> Subject: Re: [Xen-devel] 3.18 xen-pcifront regression?
>
> [+cc Rafael, linux-pci, linux-acpi]
>
> On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > > I'm having problems booting a 3.18 or newer domU w/ PCI devices
passed
> > > through. It only seems to be the domU kernel that's upset (i.e.,
Behavior
> > > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a
32bit
> > > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > > following Oops when trying to boot my domU with a couple PCI cards
passed
> > > through:
> > >
> > > BUG: unable to handle kernel paging request at 0030303e
> > > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > > Oops: 0000 [#1] PREEMPT SMP
> > > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > > Stack:
> > > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000
c0c102c0
> > > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1
cb8afd60
> > > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8
cb8afdb0
> > > Call Trace:
> > > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
> >
> > We should not be calling in any acpi code in PV domU guests.
> >
> > WE actually disable it (acpi=0) to make sure we don't call it - as
> > there is no ACPI AML data at all in the guest.
> >
> > CC-ing Bjorn.
> > > [<c096a21d>] ? resume_kernel+0x5/0x7
> > > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > > [<c0699d34>] ? pci_device_add+0x24/0x450
> > > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > > [<c0710a5f>] ? backend_changed+0xf/0x20
> > > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > > [<c070d6a0>] ? join+0x70/0x70
> > > [<c046e59b>] ? kthread+0xab/0xd0
> > > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b
5e 5f
> > > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a
04 0f
> > > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP
0069:cb8afd00
> > > CR2: 000000000030303e
> > > ---[ end trace d4ddeb038cbcbdf7 ]---
> > >
> > >
> > > I've bisected down to the following commit in 3.18, which breaks my
> > > system.
> > >
> > > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > > Author: Bjorn Helgaas <bhelgaas@google.com>
> > > Date: Wed Aug 27 14:29:47 2014 -0600
> > >
> > > PCI: Add pci_configure_device() during enumeration
> > >
> > > Some platforms can tell the OS how to configure PCI devices,
e.g., how
> > > to
> > > set cache line size, error reporting enables, etc. ACPI defines
_HPP
> > > and
> > > _HPX methods for this purpose.
> > >
> > > This configuration was previously done by some of the hotplug
drivers
> > > using
> > > pci_configure_slot(). But not all hotplug drivers did this, and
per
> > > the
> > > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices
not
> > > configured by the BIOS at system boot."
> > >
> > > Move this configuration into the PCI core by adding
> > > pci_configure_device()
> > > and calling it from pci_device_add(), so we do this for all
devices as
> > > we
> > > enumerate them.
> > >
> > > This is based on pci_configure_slot(), which is used by hotplug
> > > drivers.
> > > I omitted:
> > >
> > > - pcie_bus_configure_settings() because it configures MPS and
MRRS,
> > > which
> > > requires global knowledge of the fabric and must be done
later,
> > > and
> > >
> > > - configuration of subordinate devices; that will happen when
we
> > > call
> > > pci_device_add() for those devices.
> > >
> > > Because pci_configure_slot() was only done by hotplug drivers,
this
> > > initial
> > > version of pci_configure_device() only configures hot-added
devices,
> > > ignoring anything added during boot.
> > >
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > Acked-by: Yinghai Lu <yinghai@kernel.org>
> > >
> > > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> > >
> > >
> > > I've reverted that commit on top of 3.19, which feels incredibly
wrong,
> > > but does fix the problem on my system. This is a little over my
head,
> > > though... ;-)
> > >
> > > Thoughts?
>
> Thanks for the report, Michael, and sorry for the inconvenience. I
think
> the patch below will fix it, but I don't think it's the right fix either
> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> around like fairy dust. I wonder if we can set things up so ACPI
methods
> would fail gracefully like they do when ACPI is disabled at
compile-time.
>
> I can boot with "acpi=off" on qemu just fine, and when we look up the
ACPI
> device handles, we just get NULL pointers, so everything works out even
> without a fix like the one below.
FYI, I'm not passing "acpi=off" on the guest's command line... I believe
it's getting turned off dynamically by the guest kernel. I get the
following in dmesg within the 1st dozen lines:
ACPI in unprivileged domain disabled
>
> There must be something different about the way things get set up in
that
> domU kernel. I'll try to look into that some more, but I'm going on
> vacation for the next week, so if you learn anything before then, let me
> know.
I can confirm that your patch definitely fixes my problem.
If you need logs, kernel config, or someone to test patches, let me know.
>
> Bjorn
>
>
> commit 6678b0fb6504c890481863b4916089b41e6042bf
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Tue Mar 24 11:12:45 2015 -0500
>
> PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
>
> In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI
methods
> (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has
been
> disabled at runtime, e.g., with "acpi=off", this causes an oops
because
> there's no AML at all.
>
> Before 6cd33649fa83 ("PCI: Add pci_configure_device() during
enumeration"),
> we only used pci_get_hp_params() for hot-added devices, but after
it, we
> use it for all devices, so we're much more likely to see the oops.
>
> Don't bother looking for ACPI configuration information if ACPI has
been
> disabled.
>
> Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during
enumeration")
> Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> CC: stable@vger.kernel.org # v3.18+
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 489063987325..c93fbe76d281 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct
> hotplug_params *hpp)
> acpi_handle handle, phandle;
> struct pci_bus *pbus;
>
> + if (acpi_pci_disabled)
> + return -ENODEV;
> +
> handle = NULL;
> for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> handle = acpi_pci_get_bridge_handle(pbus);
---
Michael D Labriola
Electric Boat
mlabriol@gdeb.com
401-848-8871 (desk)
401-848-8513 (lab)
401-316-9844 (cell)
<<<DO_NOT_REMOVE_AUTOMATIC_FOOTER_GOES_HERE>>>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xen-devel] 3.18 xen-pcifront regression?
@ 2015-03-24 22:27 ` Michael D Labriola
0 siblings, 0 replies; 13+ messages in thread
From: Michael D Labriola @ 2015-03-24 22:27 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Jayson A Dyke, Konrad Rzeszutek Wilk, linux-acpi, linux-pci,
michael.d.labriola, Rafael J. Wysocki, Stuart Wehrly, xen-devel
Bjorn Helgaas <bhelgaas@google.com> wrote on 03/24/2015 01:27:02 PM:
> From: Bjorn Helgaas <bhelgaas@google.com>
> To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
> Cc: Michael D Labriola <mlabriol@gdeb.com>, xen-
> devel@lists.xenproject.org, Stuart Wehrly <swehrly@gdeb.com>,
> michael.d.labriola@gmail.com, Jayson A Dyke <jdyke@gdeb.com>, "Rafael
> J. Wysocki" <rjw@rjwysocki.net>, linux-pci@vger.kernel.org, linux-
> acpi@vger.kernel.org
> Date: 03/24/2015 01:29 PM
> Subject: Re: [Xen-devel] 3.18 xen-pcifront regression?
>
> [+cc Rafael, linux-pci, linux-acpi]
>
> On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > > I'm having problems booting a 3.18 or newer domU w/ PCI devices
passed
> > > through. It only seems to be the domU kernel that's upset (i.e.,
Behavior
> > > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a
32bit
> > > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > > following Oops when trying to boot my domU with a couple PCI cards
passed
> > > through:
> > >
> > > BUG: unable to handle kernel paging request at 0030303e
> > > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > > Oops: 0000 [#1] PREEMPT SMP
> > > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > > Stack:
> > > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000
c0c102c0
> > > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1
cb8afd60
> > > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8
cb8afdb0
> > > Call Trace:
> > > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
> >
> > We should not be calling in any acpi code in PV domU guests.
> >
> > WE actually disable it (acpi=0) to make sure we don't call it - as
> > there is no ACPI AML data at all in the guest.
> >
> > CC-ing Bjorn.
> > > [<c096a21d>] ? resume_kernel+0x5/0x7
> > > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > > [<c0699d34>] ? pci_device_add+0x24/0x450
> > > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > > [<c0710a5f>] ? backend_changed+0xf/0x20
> > > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > > [<c070d6a0>] ? join+0x70/0x70
> > > [<c046e59b>] ? kthread+0xab/0xd0
> > > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b
5e 5f
> > > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a
04 0f
> > > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP
0069:cb8afd00
> > > CR2: 000000000030303e
> > > ---[ end trace d4ddeb038cbcbdf7 ]---
> > >
> > >
> > > I've bisected down to the following commit in 3.18, which breaks my
> > > system.
> > >
> > > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > > Author: Bjorn Helgaas <bhelgaas@google.com>
> > > Date: Wed Aug 27 14:29:47 2014 -0600
> > >
> > > PCI: Add pci_configure_device() during enumeration
> > >
> > > Some platforms can tell the OS how to configure PCI devices,
e.g., how
> > > to
> > > set cache line size, error reporting enables, etc. ACPI defines
_HPP
> > > and
> > > _HPX methods for this purpose.
> > >
> > > This configuration was previously done by some of the hotplug
drivers
> > > using
> > > pci_configure_slot(). But not all hotplug drivers did this, and
per
> > > the
> > > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices
not
> > > configured by the BIOS at system boot."
> > >
> > > Move this configuration into the PCI core by adding
> > > pci_configure_device()
> > > and calling it from pci_device_add(), so we do this for all
devices as
> > > we
> > > enumerate them.
> > >
> > > This is based on pci_configure_slot(), which is used by hotplug
> > > drivers.
> > > I omitted:
> > >
> > > - pcie_bus_configure_settings() because it configures MPS and
MRRS,
> > > which
> > > requires global knowledge of the fabric and must be done
later,
> > > and
> > >
> > > - configuration of subordinate devices; that will happen when
we
> > > call
> > > pci_device_add() for those devices.
> > >
> > > Because pci_configure_slot() was only done by hotplug drivers,
this
> > > initial
> > > version of pci_configure_device() only configures hot-added
devices,
> > > ignoring anything added during boot.
> > >
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > Acked-by: Yinghai Lu <yinghai@kernel.org>
> > >
> > > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> > >
> > >
> > > I've reverted that commit on top of 3.19, which feels incredibly
wrong,
> > > but does fix the problem on my system. This is a little over my
head,
> > > though... ;-)
> > >
> > > Thoughts?
>
> Thanks for the report, Michael, and sorry for the inconvenience. I
think
> the patch below will fix it, but I don't think it's the right fix either
> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> around like fairy dust. I wonder if we can set things up so ACPI
methods
> would fail gracefully like they do when ACPI is disabled at
compile-time.
>
> I can boot with "acpi=off" on qemu just fine, and when we look up the
ACPI
> device handles, we just get NULL pointers, so everything works out even
> without a fix like the one below.
FYI, I'm not passing "acpi=off" on the guest's command line... I believe
it's getting turned off dynamically by the guest kernel. I get the
following in dmesg within the 1st dozen lines:
ACPI in unprivileged domain disabled
>
> There must be something different about the way things get set up in
that
> domU kernel. I'll try to look into that some more, but I'm going on
> vacation for the next week, so if you learn anything before then, let me
> know.
I can confirm that your patch definitely fixes my problem.
If you need logs, kernel config, or someone to test patches, let me know.
>
> Bjorn
>
>
> commit 6678b0fb6504c890481863b4916089b41e6042bf
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Tue Mar 24 11:12:45 2015 -0500
>
> PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
>
> In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI
methods
> (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has
been
> disabled at runtime, e.g., with "acpi=off", this causes an oops
because
> there's no AML at all.
>
> Before 6cd33649fa83 ("PCI: Add pci_configure_device() during
enumeration"),
> we only used pci_get_hp_params() for hot-added devices, but after
it, we
> use it for all devices, so we're much more likely to see the oops.
>
> Don't bother looking for ACPI configuration information if ACPI has
been
> disabled.
>
> Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during
enumeration")
> Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> CC: stable@vger.kernel.org # v3.18+
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 489063987325..c93fbe76d281 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct
> hotplug_params *hpp)
> acpi_handle handle, phandle;
> struct pci_bus *pbus;
>
> + if (acpi_pci_disabled)
> + return -ENODEV;
> +
> handle = NULL;
> for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> handle = acpi_pci_get_bridge_handle(pbus);
---
Michael D Labriola
Electric Boat
mlabriol@gdeb.com
401-848-8871 (desk)
401-848-8513 (lab)
401-316-9844 (cell)
<<<DO_NOT_REMOVE_AUTOMATIC_FOOTER_GOES_HERE>>>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xen-devel] 3.18 xen-pcifront regression?
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
(?)
@ 2015-03-24 23:31 ` Bjorn Helgaas
-1 siblings, 0 replies; 13+ messages in thread
From: Bjorn Helgaas @ 2015-03-24 23:31 UTC (permalink / raw)
To: Michael D Labriola
Cc: Jayson A Dyke, Konrad Rzeszutek Wilk, linux-acpi, linux-pci,
michael.d.labriola, Rafael J. Wysocki, Stuart Wehrly, xen-devel
On Tue, Mar 24, 2015 at 5:27 PM, Michael D Labriola <mlabriol@gdeb.com> wrote:
> Bjorn Helgaas <bhelgaas@google.com> wrote on 03/24/2015 01:27:02 PM:
>> Thanks for the report, Michael, and sorry for the inconvenience. I
> think
>> the patch below will fix it, but I don't think it's the right fix either
>> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
>> around like fairy dust. I wonder if we can set things up so ACPI
> methods
>> would fail gracefully like they do when ACPI is disabled at
> compile-time.
>>
>> I can boot with "acpi=off" on qemu just fine, and when we look up the
> ACPI
>> device handles, we just get NULL pointers, so everything works out even
>> without a fix like the one below.
>
> FYI, I'm not passing "acpi=off" on the guest's command line... I believe
> it's getting turned off dynamically by the guest kernel. I get the
> following in dmesg within the 1st dozen lines:
>
> ACPI in unprivileged domain disabled
That's from xen_arch_setup(), which prints it when it calls
disable_acpi(). Booting with "acpi=off" also calls disable_acpi(), so
the effect should be similar. But of course xen's PCI enumeration is
started a little differently and my guess is that difference is what
leads to this oops.
Bjorn
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
(?)
(?)
@ 2015-03-24 23:31 ` Bjorn Helgaas
-1 siblings, 0 replies; 13+ messages in thread
From: Bjorn Helgaas @ 2015-03-24 23:31 UTC (permalink / raw)
To: Michael D Labriola
Cc: Jayson A Dyke, linux-pci, michael.d.labriola, Rafael J. Wysocki,
linux-acpi, Stuart Wehrly, xen-devel
On Tue, Mar 24, 2015 at 5:27 PM, Michael D Labriola <mlabriol@gdeb.com> wrote:
> Bjorn Helgaas <bhelgaas@google.com> wrote on 03/24/2015 01:27:02 PM:
>> Thanks for the report, Michael, and sorry for the inconvenience. I
> think
>> the patch below will fix it, but I don't think it's the right fix either
>> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
>> around like fairy dust. I wonder if we can set things up so ACPI
> methods
>> would fail gracefully like they do when ACPI is disabled at
> compile-time.
>>
>> I can boot with "acpi=off" on qemu just fine, and when we look up the
> ACPI
>> device handles, we just get NULL pointers, so everything works out even
>> without a fix like the one below.
>
> FYI, I'm not passing "acpi=off" on the guest's command line... I believe
> it's getting turned off dynamically by the guest kernel. I get the
> following in dmesg within the 1st dozen lines:
>
> ACPI in unprivileged domain disabled
That's from xen_arch_setup(), which prints it when it calls
disable_acpi(). Booting with "acpi=off" also calls disable_acpi(), so
the effect should be similar. But of course xen's PCI enumeration is
started a little differently and my guess is that difference is what
leads to this oops.
Bjorn
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xen-devel] 3.18 xen-pcifront regression?
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
@ 2015-03-25 20:27 ` Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
` (2 more replies)
2015-03-25 20:27 ` Konrad Rzeszutek Wilk
2 siblings, 3 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2015-03-25 20:27 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Michael D Labriola, xen-devel, Stuart Wehrly, michael.d.labriola,
Jayson A Dyke, Rafael J. Wysocki, linux-pci, linux-acpi
On Tue, Mar 24, 2015 at 12:27:02PM -0500, Bjorn Helgaas wrote:
> [+cc Rafael, linux-pci, linux-acpi]
>
> On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > > I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
> > > through. It only seems to be the domU kernel that's upset (i.e., Behavior
> > > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
> > > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > > following Oops when trying to boot my domU with a couple PCI cards passed
> > > through:
> > >
> > > BUG: unable to handle kernel paging request at 0030303e
> > > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > > Oops: 0000 [#1] PREEMPT SMP
> > > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > > Stack:
> > > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
> > > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
> > > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
> > > Call Trace:
> > > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
> >
> > We should not be calling in any acpi code in PV domU guests.
> >
> > WE actually disable it (acpi=0) to make sure we don't call it - as
> > there is no ACPI AML data at all in the guest.
> >
> > CC-ing Bjorn.
> > > [<c096a21d>] ? resume_kernel+0x5/0x7
> > > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > > [<c0699d34>] ? pci_device_add+0x24/0x450
> > > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > > [<c0710a5f>] ? backend_changed+0xf/0x20
> > > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > > [<c070d6a0>] ? join+0x70/0x70
> > > [<c046e59b>] ? kthread+0xab/0xd0
> > > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
> > > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
> > > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
> > > CR2: 000000000030303e
> > > ---[ end trace d4ddeb038cbcbdf7 ]---
> > >
> > >
> > > I've bisected down to the following commit in 3.18, which breaks my
> > > system.
> > >
> > > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > > Author: Bjorn Helgaas <bhelgaas@google.com>
> > > Date: Wed Aug 27 14:29:47 2014 -0600
> > >
> > > PCI: Add pci_configure_device() during enumeration
> > >
> > > Some platforms can tell the OS how to configure PCI devices, e.g., how
> > > to
> > > set cache line size, error reporting enables, etc. ACPI defines _HPP
> > > and
> > > _HPX methods for this purpose.
> > >
> > > This configuration was previously done by some of the hotplug drivers
> > > using
> > > pci_configure_slot(). But not all hotplug drivers did this, and per
> > > the
> > > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
> > > configured by the BIOS at system boot."
> > >
> > > Move this configuration into the PCI core by adding
> > > pci_configure_device()
> > > and calling it from pci_device_add(), so we do this for all devices as
> > > we
> > > enumerate them.
> > >
> > > This is based on pci_configure_slot(), which is used by hotplug
> > > drivers.
> > > I omitted:
> > >
> > > - pcie_bus_configure_settings() because it configures MPS and MRRS,
> > > which
> > > requires global knowledge of the fabric and must be done later,
> > > and
> > >
> > > - configuration of subordinate devices; that will happen when we
> > > call
> > > pci_device_add() for those devices.
> > >
> > > Because pci_configure_slot() was only done by hotplug drivers, this
> > > initial
> > > version of pci_configure_device() only configures hot-added devices,
> > > ignoring anything added during boot.
> > >
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > Acked-by: Yinghai Lu <yinghai@kernel.org>
> > >
> > > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> > >
> > >
> > > I've reverted that commit on top of 3.19, which feels incredibly wrong,
> > > but does fix the problem on my system. This is a little over my head,
> > > though... ;-)
> > >
> > > Thoughts?
>
> Thanks for the report, Michael, and sorry for the inconvenience. I think
> the patch below will fix it, but I don't think it's the right fix either
> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> around like fairy dust. I wonder if we can set things up so ACPI methods
> would fail gracefully like they do when ACPI is disabled at compile-time.
>
> I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
> device handles, we just get NULL pointers, so everything works out even
> without a fix like the one below.
<nods>
>
> There must be something different about the way things get set up in that
> domU kernel. I'll try to look into that some more, but I'm going on
> vacation for the next week, so if you learn anything before then, let me
> know.
And I don't see where 'resume_kernel' gets called.
And under my PV guest I see:
# lspci
00:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
00:01.0 USB Controller: NEC Corporation Device 0194 (rev 03)
when the guest boots up. Hm, what kind of cards are these?
Could you also provide the config file and the guest config please?
Thank you!
>
> Bjorn
>
>
> commit 6678b0fb6504c890481863b4916089b41e6042bf
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Tue Mar 24 11:12:45 2015 -0500
>
> PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
>
> In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
> (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
> disabled at runtime, e.g., with "acpi=off", this causes an oops because
> there's no AML at all.
>
> Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
> we only used pci_get_hp_params() for hot-added devices, but after it, we
> use it for all devices, so we're much more likely to see the oops.
>
> Don't bother looking for ACPI configuration information if ACPI has been
> disabled.
>
> Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
> Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> CC: stable@vger.kernel.org # v3.18+
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 489063987325..c93fbe76d281 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
> acpi_handle handle, phandle;
> struct pci_bus *pbus;
>
> + if (acpi_pci_disabled)
> + return -ENODEV;
> +
> handle = NULL;
> for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
@ 2015-03-25 20:27 ` Konrad Rzeszutek Wilk
2 siblings, 0 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2015-03-25 20:27 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Jayson A Dyke, Stuart Wehrly, michael.d.labriola,
Rafael J. Wysocki, linux-acpi, Michael D Labriola, linux-pci,
xen-devel
On Tue, Mar 24, 2015 at 12:27:02PM -0500, Bjorn Helgaas wrote:
> [+cc Rafael, linux-pci, linux-acpi]
>
> On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > > I'm having problems booting a 3.18 or newer domU w/ PCI devices passed
> > > through. It only seems to be the domU kernel that's upset (i.e., Behavior
> > > is identical whether I'm running 3.19 or 3.13 dom0). I'm running a 32bit
> > > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get the
> > > following Oops when trying to boot my domU with a couple PCI cards passed
> > > through:
> > >
> > > BUG: unable to handle kernel paging request at 0030303e
> > > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > > Oops: 0000 [#1] PREEMPT SMP
> > > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > > Stack:
> > > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000 c0c102c0
> > > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1 cb8afd60
> > > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8 cb8afdb0
> > > Call Trace:
> > > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
> >
> > We should not be calling in any acpi code in PV domU guests.
> >
> > WE actually disable it (acpi=0) to make sure we don't call it - as
> > there is no ACPI AML data at all in the guest.
> >
> > CC-ing Bjorn.
> > > [<c096a21d>] ? resume_kernel+0x5/0x7
> > > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > > [<c0699d34>] ? pci_device_add+0x24/0x450
> > > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654 [xen_pcifront]
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > > [<c0710a5f>] ? backend_changed+0xf/0x20
> > > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > > [<c070d6a0>] ? join+0x70/0x70
> > > [<c046e59b>] ? kthread+0xab/0xd0
> > > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31 c0 5b 5e 5f
> > > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80> 7a 04 0f
> > > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP 0069:cb8afd00
> > > CR2: 000000000030303e
> > > ---[ end trace d4ddeb038cbcbdf7 ]---
> > >
> > >
> > > I've bisected down to the following commit in 3.18, which breaks my
> > > system.
> > >
> > > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > > Author: Bjorn Helgaas <bhelgaas@google.com>
> > > Date: Wed Aug 27 14:29:47 2014 -0600
> > >
> > > PCI: Add pci_configure_device() during enumeration
> > >
> > > Some platforms can tell the OS how to configure PCI devices, e.g., how
> > > to
> > > set cache line size, error reporting enables, etc. ACPI defines _HPP
> > > and
> > > _HPX methods for this purpose.
> > >
> > > This configuration was previously done by some of the hotplug drivers
> > > using
> > > pci_configure_slot(). But not all hotplug drivers did this, and per
> > > the
> > > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices not
> > > configured by the BIOS at system boot."
> > >
> > > Move this configuration into the PCI core by adding
> > > pci_configure_device()
> > > and calling it from pci_device_add(), so we do this for all devices as
> > > we
> > > enumerate them.
> > >
> > > This is based on pci_configure_slot(), which is used by hotplug
> > > drivers.
> > > I omitted:
> > >
> > > - pcie_bus_configure_settings() because it configures MPS and MRRS,
> > > which
> > > requires global knowledge of the fabric and must be done later,
> > > and
> > >
> > > - configuration of subordinate devices; that will happen when we
> > > call
> > > pci_device_add() for those devices.
> > >
> > > Because pci_configure_slot() was only done by hotplug drivers, this
> > > initial
> > > version of pci_configure_device() only configures hot-added devices,
> > > ignoring anything added during boot.
> > >
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > Acked-by: Yinghai Lu <yinghai@kernel.org>
> > >
> > > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> > >
> > >
> > > I've reverted that commit on top of 3.19, which feels incredibly wrong,
> > > but does fix the problem on my system. This is a little over my head,
> > > though... ;-)
> > >
> > > Thoughts?
>
> Thanks for the report, Michael, and sorry for the inconvenience. I think
> the patch below will fix it, but I don't think it's the right fix either
> because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> around like fairy dust. I wonder if we can set things up so ACPI methods
> would fail gracefully like they do when ACPI is disabled at compile-time.
>
> I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
> device handles, we just get NULL pointers, so everything works out even
> without a fix like the one below.
<nods>
>
> There must be something different about the way things get set up in that
> domU kernel. I'll try to look into that some more, but I'm going on
> vacation for the next week, so if you learn anything before then, let me
> know.
And I don't see where 'resume_kernel' gets called.
And under my PV guest I see:
# lspci
00:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
00:01.0 USB Controller: NEC Corporation Device 0194 (rev 03)
when the guest boots up. Hm, what kind of cards are these?
Could you also provide the config file and the guest config please?
Thank you!
>
> Bjorn
>
>
> commit 6678b0fb6504c890481863b4916089b41e6042bf
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Tue Mar 24 11:12:45 2015 -0500
>
> PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
>
> In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
> (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
> disabled at runtime, e.g., with "acpi=off", this causes an oops because
> there's no AML at all.
>
> Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
> we only used pci_get_hp_params() for hot-added devices, but after it, we
> use it for all devices, so we're much more likely to see the oops.
>
> Don't bother looking for ACPI configuration information if ACPI has been
> disabled.
>
> Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
> Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> CC: stable@vger.kernel.org # v3.18+
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 489063987325..c93fbe76d281 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
> acpi_handle handle, phandle;
> struct pci_bus *pbus;
>
> + if (acpi_pci_disabled)
> + return -ENODEV;
> +
> handle = NULL;
> for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xen-devel] 3.18 xen-pcifront regression?
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
@ 2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 21:01 ` Michael D Labriola
2 siblings, 0 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2015-03-25 20:40 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Michael D Labriola, xen-devel, Stuart Wehrly, michael.d.labriola,
Jayson A Dyke, Rafael J. Wysocki, linux-pci, linux-acpi
> > Thanks for the report, Michael, and sorry for the inconvenience. I think
> > the patch below will fix it, but I don't think it's the right fix either
> > because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> > around like fairy dust. I wonder if we can set things up so ACPI methods
> > would fail gracefully like they do when ACPI is disabled at compile-time.
> >
> > I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
> > device handles, we just get NULL pointers, so everything works out even
> > without a fix like the one below.
>
> <nods>
> >
> > There must be something different about the way things get set up in that
> > domU kernel. I'll try to look into that some more, but I'm going on
> > vacation for the next week, so if you learn anything before then, let me
> > know.
>
> And I don't see where 'resume_kernel' gets called.
>
>
> And under my PV guest I see:
> # lspci
> 00:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
> 00:01.0 USB Controller: NEC Corporation Device 0194 (rev 03)
>
> when the guest boots up. Hm, what kind of cards are these?
> Could you also provide the config file and the guest config please?
It helps when I boot an proper kernel (I had booted 3.16 by mistake).
With the 4.0 kernel I see this as well:
[ 4.059387] pci 0000:00:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[ 4.114184] BUG: unable to handle kernel paging request at 0030303e
[ 4.114199] IP: [<c1379c1c>] acpi_ns_validate_handle+0x1c/0x26
[ 4.114216] *pdpt = 0000000000000000 *pde = c2c2c2c2c2c2c2c2
[ 4.114230] Oops: 0000 [#1] SMP
[ 4.114241] Modules linked in:
[ 4.114252] CPU: 0 PID: 22 Comm: xenwatch Not tainted 4.0.0-rc5upstream-00070-g3a88f16 #1
[ 4.114268] task: dd557370 ti: dd55a000 task.ti: dd55a000
[ 4.114278] EIP: e019:[<c1379c1c>] EFLAGS: 00010246 CPU: 0
[ 4.114289] EIP is at acpi_ns_validate_handle+0x1c/0x26
[ 4.114299] EAX: 00000000 EBX: 0030303a ECX: 00000000 EDX: 00000000
[ 4.114310] ESI: dd66e7c0 EDI: 0030303a EBP: dd55bcd8 ESP: dd55bcd4
[ 4.114322] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: e021
[ 4.114334] CR0: 80050033 CR2: 0030303e CR3: 019a4000 CR4: 00042660
[ 4.114347] Stack:
[ 4.114354] c17ae853 dd55bd14 c137ae18 00000010 c1a602c0 dd55bcf0 c109ae9a dd55bcfc
[ 4.114376] c13a9c57 deadbeef dd55bd50 00000000 deadbeef 0030303a dd55bd78 dd55bdd0
[ 4.114397] dd55bd58 c1336d90 dd55bd40 0000007b 0000007b 000000d8 dd55bd94 dd55bd8c
[ 4.114419] Call Trace:
[ 4.114429] [<c137ae18>] acpi_evaluate_object+0x6f/0x366
[ 4.114443] [<c109ae9a>] ? irq_exit+0x4a/0xc0
[ 4.114456] [<c13a9c57>] ? xen_evtchn_do_upcall+0x27/0x40
[ 4.114468] [<c1336d90>] pci_get_hp_params+0x110/0x4b0
[ 4.114480] [<c1316436>] pci_device_add+0x26/0x450
[ 4.114494] [<c10409db>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 4.115132] [<c16509c6>] ? _raw_spin_unlock_irqrestore+0x16/0x40
[ 4.115132] [<c13171eb>] pci_scan_single_device+0x8b/0xb0
[ 4.115132] [<c1317253>] pci_scan_slot+0x43/0x100
[ 4.115132] [<c1317cfc>] pci_scan_child_bus+0x1c/0xa0
[ 4.115132] [<c1318254>] pci_scan_bus_parented+0x64/0x90
[ 4.115132] [<c1337730>] pcifront_scan_root+0x90/0x120
[ 4.115132] [<c164b8e5>] pcifront_backend_changed+0x475/0x63c
[ 4.115132] [<c164b200>] ? kmemleak_free+0x20/0x50
[ 4.115132] [<c119ec9d>] ? kfree+0x7d/0x100
[ 4.115132] [<c13a028d>] ? __cleanup+0xfd/0x180
[ 4.115132] [<c13ae28d>] ? xenbus_gather+0x5d/0x90
[ 4.115132] [<c13ac475>] ? xenbus_read_driver_state+0x35/0x50
[ 4.115132] [<c13af3cd>] xenbus_otherend_changed+0x7d/0x80
[ 4.115132] [<c13b0bf2>] backend_changed+0x12/0x20
[ 4.115132] [<c13adb12>] xenwatch_thread+0x72/0x120
[ 4.115132] [<c10ccc00>] ? woken_wake_function+0x20/0x20
[ 4.115132] [<c10b10bc>] kthread+0xac/0xd0
[ 4.115132] [<c13adaa0>] ? xenbus_transaction_start+0x60/0x60
[ 4.115132] [<c1650fc1>] ret_from_kernel_thread+0x21/0x30
[ 4.115132] [<c10b1010>] ? kthread_freezable_should_stop+0x60/0x60
[ 4.115132] Code: 4f b2 00 00 31 c0 83 c4 2c 5b 5e 5f 5d c3 90 55 89 e5 53 89 c3 e8 45 b0 00 00 8d 43 ff 83 f8 fd 76 07 a1 20 80 a6 c1 eb 09 31 c0 <80> 7b 04 0f 0f 44 c3 5b 5d c3 55 89 e5 53 89 c3 e8 1f b0 00 00
[ 4.115132] EIP: [<c1379c1c>] acpi_ns_validate_handle+0x1c/0x26 SS:ESP e021:dd55bcd4
[ 4.115132] CR2: 000000000030303e
[ 4.115132] ---[ end trace 21d8bfe52b77b825 ]---
[ 4.115132] Kernel panic - not syncing: Fatal exception
[ 4.115132] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xedbfdfff)
The interesting thing is that under 64-bit kernels I see this:
[ 3.304732] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]^M
[ 3.304748] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]^M
[ 3.304764] pci_bus 0000:00: root bus resource [bus 00-ff]^M
[ 3.305023] pci 0000:00:00.0: [1033:0194] type 00 class 0x0c0330^M
[ 3.322181] pci 0000:00:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]^M
[ 3.377359] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.377379] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.379202] pci 0000:00:01.0: [1033:0194] type 00 class 0x0c0330^M
[ 3.396282] pci 0000:00:01.0: reg 0x10: [mem 0xfba00000-0xfba01fff 64bit]^M
[ 3.451422] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.451440] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.456133] pcifront pci-0: claiming resource 0000:00:00.0/0^M
[ 3.456147] pcifront pci-0: claiming resource 0000:00:01.0/0^M
[ 3.456461] pci 0000:00:00.0: Xen PCI mapped GSI18 to IRQ25^M
>
> Thank you!
>
> >
> > Bjorn
> >
> >
> > commit 6678b0fb6504c890481863b4916089b41e6042bf
> > Author: Bjorn Helgaas <bhelgaas@google.com>
> > Date: Tue Mar 24 11:12:45 2015 -0500
> >
> > PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
> >
> > In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
> > (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
> > disabled at runtime, e.g., with "acpi=off", this causes an oops because
> > there's no AML at all.
> >
> > Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
> > we only used pci_get_hp_params() for hot-added devices, but after it, we
> > use it for all devices, so we're much more likely to see the oops.
> >
> > Don't bother looking for ACPI configuration information if ACPI has been
> > disabled.
> >
> > Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
> > Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > CC: stable@vger.kernel.org # v3.18+
> >
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index 489063987325..c93fbe76d281 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
> > acpi_handle handle, phandle;
> > struct pci_bus *pbus;
> >
> > + if (acpi_pci_disabled)
> > + return -ENODEV;
> > +
> > handle = NULL;
> > for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> > handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
@ 2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 21:01 ` Michael D Labriola
2 siblings, 0 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2015-03-25 20:40 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Jayson A Dyke, Stuart Wehrly, michael.d.labriola,
Rafael J. Wysocki, linux-acpi, Michael D Labriola, linux-pci,
xen-devel
> > Thanks for the report, Michael, and sorry for the inconvenience. I think
> > the patch below will fix it, but I don't think it's the right fix either
> > because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> > around like fairy dust. I wonder if we can set things up so ACPI methods
> > would fail gracefully like they do when ACPI is disabled at compile-time.
> >
> > I can boot with "acpi=off" on qemu just fine, and when we look up the ACPI
> > device handles, we just get NULL pointers, so everything works out even
> > without a fix like the one below.
>
> <nods>
> >
> > There must be something different about the way things get set up in that
> > domU kernel. I'll try to look into that some more, but I'm going on
> > vacation for the next week, so if you learn anything before then, let me
> > know.
>
> And I don't see where 'resume_kernel' gets called.
>
>
> And under my PV guest I see:
> # lspci
> 00:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
> 00:01.0 USB Controller: NEC Corporation Device 0194 (rev 03)
>
> when the guest boots up. Hm, what kind of cards are these?
> Could you also provide the config file and the guest config please?
It helps when I boot an proper kernel (I had booted 3.16 by mistake).
With the 4.0 kernel I see this as well:
[ 4.059387] pci 0000:00:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[ 4.114184] BUG: unable to handle kernel paging request at 0030303e
[ 4.114199] IP: [<c1379c1c>] acpi_ns_validate_handle+0x1c/0x26
[ 4.114216] *pdpt = 0000000000000000 *pde = c2c2c2c2c2c2c2c2
[ 4.114230] Oops: 0000 [#1] SMP
[ 4.114241] Modules linked in:
[ 4.114252] CPU: 0 PID: 22 Comm: xenwatch Not tainted 4.0.0-rc5upstream-00070-g3a88f16 #1
[ 4.114268] task: dd557370 ti: dd55a000 task.ti: dd55a000
[ 4.114278] EIP: e019:[<c1379c1c>] EFLAGS: 00010246 CPU: 0
[ 4.114289] EIP is at acpi_ns_validate_handle+0x1c/0x26
[ 4.114299] EAX: 00000000 EBX: 0030303a ECX: 00000000 EDX: 00000000
[ 4.114310] ESI: dd66e7c0 EDI: 0030303a EBP: dd55bcd8 ESP: dd55bcd4
[ 4.114322] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: e021
[ 4.114334] CR0: 80050033 CR2: 0030303e CR3: 019a4000 CR4: 00042660
[ 4.114347] Stack:
[ 4.114354] c17ae853 dd55bd14 c137ae18 00000010 c1a602c0 dd55bcf0 c109ae9a dd55bcfc
[ 4.114376] c13a9c57 deadbeef dd55bd50 00000000 deadbeef 0030303a dd55bd78 dd55bdd0
[ 4.114397] dd55bd58 c1336d90 dd55bd40 0000007b 0000007b 000000d8 dd55bd94 dd55bd8c
[ 4.114419] Call Trace:
[ 4.114429] [<c137ae18>] acpi_evaluate_object+0x6f/0x366
[ 4.114443] [<c109ae9a>] ? irq_exit+0x4a/0xc0
[ 4.114456] [<c13a9c57>] ? xen_evtchn_do_upcall+0x27/0x40
[ 4.114468] [<c1336d90>] pci_get_hp_params+0x110/0x4b0
[ 4.114480] [<c1316436>] pci_device_add+0x26/0x450
[ 4.114494] [<c10409db>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 4.115132] [<c16509c6>] ? _raw_spin_unlock_irqrestore+0x16/0x40
[ 4.115132] [<c13171eb>] pci_scan_single_device+0x8b/0xb0
[ 4.115132] [<c1317253>] pci_scan_slot+0x43/0x100
[ 4.115132] [<c1317cfc>] pci_scan_child_bus+0x1c/0xa0
[ 4.115132] [<c1318254>] pci_scan_bus_parented+0x64/0x90
[ 4.115132] [<c1337730>] pcifront_scan_root+0x90/0x120
[ 4.115132] [<c164b8e5>] pcifront_backend_changed+0x475/0x63c
[ 4.115132] [<c164b200>] ? kmemleak_free+0x20/0x50
[ 4.115132] [<c119ec9d>] ? kfree+0x7d/0x100
[ 4.115132] [<c13a028d>] ? __cleanup+0xfd/0x180
[ 4.115132] [<c13ae28d>] ? xenbus_gather+0x5d/0x90
[ 4.115132] [<c13ac475>] ? xenbus_read_driver_state+0x35/0x50
[ 4.115132] [<c13af3cd>] xenbus_otherend_changed+0x7d/0x80
[ 4.115132] [<c13b0bf2>] backend_changed+0x12/0x20
[ 4.115132] [<c13adb12>] xenwatch_thread+0x72/0x120
[ 4.115132] [<c10ccc00>] ? woken_wake_function+0x20/0x20
[ 4.115132] [<c10b10bc>] kthread+0xac/0xd0
[ 4.115132] [<c13adaa0>] ? xenbus_transaction_start+0x60/0x60
[ 4.115132] [<c1650fc1>] ret_from_kernel_thread+0x21/0x30
[ 4.115132] [<c10b1010>] ? kthread_freezable_should_stop+0x60/0x60
[ 4.115132] Code: 4f b2 00 00 31 c0 83 c4 2c 5b 5e 5f 5d c3 90 55 89 e5 53 89 c3 e8 45 b0 00 00 8d 43 ff 83 f8 fd 76 07 a1 20 80 a6 c1 eb 09 31 c0 <80> 7b 04 0f 0f 44 c3 5b 5d c3 55 89 e5 53 89 c3 e8 1f b0 00 00
[ 4.115132] EIP: [<c1379c1c>] acpi_ns_validate_handle+0x1c/0x26 SS:ESP e021:dd55bcd4
[ 4.115132] CR2: 000000000030303e
[ 4.115132] ---[ end trace 21d8bfe52b77b825 ]---
[ 4.115132] Kernel panic - not syncing: Fatal exception
[ 4.115132] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xedbfdfff)
The interesting thing is that under 64-bit kernels I see this:
[ 3.304732] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]^M
[ 3.304748] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]^M
[ 3.304764] pci_bus 0000:00: root bus resource [bus 00-ff]^M
[ 3.305023] pci 0000:00:00.0: [1033:0194] type 00 class 0x0c0330^M
[ 3.322181] pci 0000:00:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]^M
[ 3.377359] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.377379] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.379202] pci 0000:00:01.0: [1033:0194] type 00 class 0x0c0330^M
[ 3.396282] pci 0000:00:01.0: reg 0x10: [mem 0xfba00000-0xfba01fff 64bit]^M
[ 3.451422] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.451440] ACPI Exception: AE_BAD_PARAMETER, Thread 520623344 could not acquire Mutex [0x1] (20150204/utmutex-285)^M
[ 3.456133] pcifront pci-0: claiming resource 0000:00:00.0/0^M
[ 3.456147] pcifront pci-0: claiming resource 0000:00:01.0/0^M
[ 3.456461] pci 0000:00:00.0: Xen PCI mapped GSI18 to IRQ25^M
>
> Thank you!
>
> >
> > Bjorn
> >
> >
> > commit 6678b0fb6504c890481863b4916089b41e6042bf
> > Author: Bjorn Helgaas <bhelgaas@google.com>
> > Date: Tue Mar 24 11:12:45 2015 -0500
> >
> > PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
> >
> > In a kernel with CONFIG_ACPI=y, pci_get_hp_params() evaluates ACPI methods
> > (_HPX, _HPP, etc.) to learn how to configure devices. If ACPI has been
> > disabled at runtime, e.g., with "acpi=off", this causes an oops because
> > there's no AML at all.
> >
> > Before 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration"),
> > we only used pci_get_hp_params() for hot-added devices, but after it, we
> > use it for all devices, so we're much more likely to see the oops.
> >
> > Don't bother looking for ACPI configuration information if ACPI has been
> > disabled.
> >
> > Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
> > Reported-by: Michael D Labriola <mlabriol@gdeb.com>
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > CC: stable@vger.kernel.org # v3.18+
> >
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index 489063987325..c93fbe76d281 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -248,6 +248,9 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
> > acpi_handle handle, phandle;
> > struct pci_bus *pbus;
> >
> > + if (acpi_pci_disabled)
> > + return -ENODEV;
> > +
> > handle = NULL;
> > for (pbus = dev->bus; pbus; pbus = pbus->parent) {
> > handle = acpi_pci_get_bridge_handle(pbus);
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 3.18 xen-pcifront regression?
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
@ 2015-03-25 21:01 ` Michael D Labriola
2 siblings, 0 replies; 13+ messages in thread
From: Michael D Labriola @ 2015-03-25 21:01 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: Jayson A Dyke, linux-pci, michael.d.labriola, Rafael J. Wysocki,
linux-acpi, Stuart Wehrly, Bjorn Helgaas, xen-devel
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote on 03/25/2015
04:27:00 PM:
> From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> To: Bjorn Helgaas <bhelgaas@google.com>,
> Cc: Michael D Labriola <mlabriol@gdeb.com>, xen-
> devel@lists.xenproject.org, Stuart Wehrly <swehrly@gdeb.com>,
> michael.d.labriola@gmail.com, Jayson A Dyke <jdyke@gdeb.com>, "Rafael
> J. Wysocki" <rjw@rjwysocki.net>, linux-pci@vger.kernel.org, linux-
> acpi@vger.kernel.org
> Date: 03/25/2015 04:27 PM
> Subject: Re: [Xen-devel] 3.18 xen-pcifront regression?
>
> On Tue, Mar 24, 2015 at 12:27:02PM -0500, Bjorn Helgaas wrote:
> > [+cc Rafael, linux-pci, linux-acpi]
> >
> > On Tue, Mar 24, 2015 at 11:28:06AM -0400, Konrad Rzeszutek Wilk wrote:
> > > On Tue, Mar 24, 2015 at 11:14:29AM -0400, Michael D Labriola wrote:
> > > > I'm having problems booting a 3.18 or newer domU w/ PCI devices
passed
> > > > through. It only seems to be the domU kernel that's upset
> (i.e., Behavior
> > > > is identical whether I'm running 3.19 or 3.13 dom0). I'm running
a 32bit
> > > > dom0 (3.13.11) w/ 64bit 4.4.0 hypervisor and 32bit domU. I get
the
> > > > following Oops when trying to boot my domU with a couple PCI cards
passed
> > > > through:
> > > >
> > > > BUG: unable to handle kernel paging request at 0030303e
> > > > IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
> > > > *pdpt = 00000000019f1027 *pde = 0000000000000000
> > > > Oops: 0000 [#1] PREEMPT SMP
> > > > Modules linked in: xen_pcifront(+) pcspkr xen_blkfront loop
> > > > CPU: 0 PID: 18 Comm: xenwatch Not tainted 3.17.0-test+ #6
> > > > task: cb869950 ti: cb8ae000 task.ti: cb8ae000
> > > > EIP: 0061:[<c06ed0e6>] EFLAGS: 00010246 CPU: 0
> > > > EIP is at acpi_ns_validate_handle+0x12/0x1a
> > > > EAX: 00000000 EBX: cb895dc0 ECX: 00000000 EDX: 0030303a
> > > > ESI: c0a6bccd EDI: 00000000 EBP: 00000004 ESP: cb8afd00
> > > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > > > CR0: 8005003b CR2: 0030303e CR3: 0a68e000 CR4: 00040660
> > > > Stack:
> > > > c06eda4d 00000000 c096a21d 00000000 00000000 00006462 00000000
c0c102c0
> > > > 0030303a 00040004 0030303a cb8afd94 cb8afdec cb8afd60 c06b78e1
cb8afd60
> > > > 00000061 00000246 c0407bc7 c0c102c0 00000000 cb8afda0 cb8afda8
cb8afdb0
> > > > Call Trace:
> > > > [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
> > >
> > > We should not be calling in any acpi code in PV domU guests.
> > >
> > > WE actually disable it (acpi=0) to make sure we don't call it - as
> > > there is no ACPI AML data at all in the guest.
> > >
> > > CC-ing Bjorn.
> > > > [<c096a21d>] ? resume_kernel+0x5/0x7
> > > > [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
> > > > [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
> > > > [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
> > > > [<c0699d34>] ? pci_device_add+0x24/0x450
> > > > [<c06975ce>] ? pci_bus_read_config_word+0x6e/0x80
> > > > [<c069a66d>] ? pci_scan_single_device+0x8d/0xb0
> > > > [<c069a6cc>] ? pci_scan_slot+0x3c/0xf0
> > > > [<c069b1bc>] ? pci_scan_child_bus+0x1c/0x90
> > > > [<c069b71a>] ? pci_scan_bus_parented+0x6a/0x90
> > > > [<d088d241>] ? pcifront_scan_root+0x91/0x130 [xen_pcifront]
> > > > [<d088e69f>] ? pcifront_backend_changed+0x4af/0x654
[xen_pcifront]
> > > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > > [<c070dd0f>] ? xenbus_gather+0x5f/0x90
> > > > [<c070c393>] ? xenbus_read_driver_state+0x33/0x50
> > > > [<c070f375>] ? xenbus_otherend_changed+0x95/0xa0
> > > > [<c0710a5f>] ? backend_changed+0xf/0x20
> > > > [<c070d712>] ? xenwatch_thread+0x72/0x110
> > > > [<c0486140>] ? bit_waitqueue+0x50/0x50
> > > > [<c070d6a0>] ? join+0x70/0x70
> > > > [<c046e59b>] ? kthread+0xab/0xd0
> > > > [<c096a1c1>] ? ret_from_kernel_thread+0x21/0x30
> > > > [<c046e4f0>] ? flush_kthread_worker+0xa0/0xa0
> > > > Code: 03 10 00 00 eb 0e 46 83 c2 04 4b 85 db 75 b9 c6 02 00 31
> c0 5b 5e 5f
> > > > 5d c3 89 c2 8d 40 ff 83 f8 fd 76 06 a1 2c 32 c1 c0 c3 31 c0 <80>7a
04 0f
> > > > 0f 44 c2 c3 83 ec 10 83 f8 1d 76 24 89 44 24 0c c7
> > > > EIP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a SS:ESP
0069:cb8afd00
> > > > CR2: 000000000030303e
> > > > ---[ end trace d4ddeb038cbcbdf7 ]---
> > > >
> > > >
> > > > I've bisected down to the following commit in 3.18, which breaks
my
> > > > system.
> > > >
> > > > 6cd33649fa83d97ba7b66f1d871a360e867c5220 is the first bad commit
> > > > commit 6cd33649fa83d97ba7b66f1d871a360e867c5220
> > > > Author: Bjorn Helgaas <bhelgaas@google.com>
> > > > Date: Wed Aug 27 14:29:47 2014 -0600
> > > >
> > > > PCI: Add pci_configure_device() during enumeration
> > > >
> > > > Some platforms can tell the OS how to configure PCI
devices,e.g., how
> > > > to
> > > > set cache line size, error reporting enables, etc. ACPI
defines _HPP
> > > > and
> > > > _HPX methods for this purpose.
> > > >
> > > > This configuration was previously done by some of the hotplug
drivers
> > > > using
> > > > pci_configure_slot(). But not all hotplug drivers did this,
and per
> > > > the
> > > > spec (ACPI rev 5.0, sec 6.2.7), we can also do it for "devices
not
> > > > configured by the BIOS at system boot."
> > > >
> > > > Move this configuration into the PCI core by adding
> > > > pci_configure_device()
> > > > and calling it from pci_device_add(), so we do this for all
> devices as
> > > > we
> > > > enumerate them.
> > > >
> > > > This is based on pci_configure_slot(), which is used by
hotplug
> > > > drivers.
> > > > I omitted:
> > > >
> > > > - pcie_bus_configure_settings() because it configures MPS
and MRRS,
> > > > which
> > > > requires global knowledge of the fabric and must be done
later,
> > > > and
> > > >
> > > > - configuration of subordinate devices; that will happen
when we
> > > > call
> > > > pci_device_add() for those devices.
> > > >
> > > > Because pci_configure_slot() was only done by hotplug drivers,
this
> > > > initial
> > > > version of pci_configure_device() only configures hot-added
devices,
> > > > ignoring anything added during boot.
> > > >
> > > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > > Acked-by: Yinghai Lu <yinghai@kernel.org>
> > > >
> > > > :040000 040000 4fadbe1e5f8f18daa6be7bdb7c9c1d6def0a2615
> > > > 9aef037aa35ca156ac46553f7fc4c5b1b3980c19 M drivers
> > > >
> > > >
> > > > I've reverted that commit on top of 3.19, which feels incredibly
wrong,
> > > > but does fix the problem on my system. This is a little over my
head,
> > > > though... ;-)
> > > >
> > > > Thoughts?
> >
> > Thanks for the report, Michael, and sorry for the inconvenience. I
think
> > the patch below will fix it, but I don't think it's the right fix
either
> > because it seems a little ad hoc to sprinkle "acpi_pci_disabled" tests
> > around like fairy dust. I wonder if we can set things up so ACPI
methods
> > would fail gracefully like they do when ACPI is disabled at
compile-time.
> >
> > I can boot with "acpi=off" on qemu just fine, and when we look up the
ACPI
> > device handles, we just get NULL pointers, so everything works out
even
> > without a fix like the one below.
>
> <nods>
> >
> > There must be something different about the way things get set up in
that
> > domU kernel. I'll try to look into that some more, but I'm going on
> > vacation for the next week, so if you learn anything before then, let
me
> > know.
>
> And I don't see where 'resume_kernel' gets called.
>
>
> And under my PV guest I see:
> # lspci
> 00:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
> 00:01.0 USB Controller: NEC Corporation Device 0194 (rev 03)
>
> when the guest boots up. Hm, what kind of cards are these?
> Could you also provide the config file and the guest config please?
The cards I've tried to pass are:
03:04.0 Communication controller: Sabtech Industries NTDS Swift Type E
(rev 01)
Subsystem: Sabtech Industries NTDS Swift Type E
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 44
Memory at fe901000 (32-bit, non-prefetchable) [size=512]
I/O ports at d100 [size=256]
Memory at fe900000 (32-bit, non-prefetchable) [size=256]
I/O ports at d000 [size=256]
Capabilities: [40] Power Management version 0
Capabilities: [48] #00 [0000]
Kernel driver in use: pciback
05:00.0 Serial controller: Systembase Co Ltd Device 4d02 (rev b0) (prog-if
02 [16550])
Subsystem: Systembase Co Ltd Device 4d02
Flags: 66MHz, medium devsel, IRQ 32
I/O ports at c090 [size=16]
I/O ports at c040 [size=64]
Capabilities: [40] Power Management version 3
Kernel driver in use: pciback
05:01.0 Serial controller: Systembase Co Ltd Device 4d02 (rev b0) (prog-if
02 [16550])
Subsystem: Systembase Co Ltd Device 4d02
Flags: 66MHz, medium devsel, IRQ 33
I/O ports at c080 [size=16]
I/O ports at c000 [size=64]
Capabilities: [40] Power Management version 3
Kernel driver in use: pciback
07:04.0 Communication controller: Sabtech Industries NTDS Swift Type E
(rev 01)
Subsystem: Sabtech Industries NTDS Swift Type E
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 40
Memory at fe801000 (32-bit, non-prefetchable) [size=512]
I/O ports at b100 [size=256]
Memory at fe800000 (32-bit, non-prefetchable) [size=256]
I/O ports at b000 [size=256]
Capabilities: [40] Power Management version 0
Capabilities: [48] #00 [0000]
Kernel driver in use: pciback
No combination of cards and/or permissive made any difference.
Here's my guest config:
kernel = "/boot/vmlinuz-test"
ramdisk = "/boot/initrd-test.img"
disk = ["drbd:sim2,xvda1,w"]
memory = 256
name = "sim2"
vif = [ "mac=00:16:3e:3b:c2:82" ]
extra = "root=/dev/xvda1 console=hvc0 quiet iommu=soft"
pci = ["05:0.0,permissive=1", "05:01.0,permissive=1",
"03:04.0,permissive=1", "07:04.0,permissive=1"]
And here's my kernel config:
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.19.2 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-test"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_INIT_FALLBACK is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=64
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_UP_APIC_MSI=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_AMD_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_GX_SUSPMOD=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_LONGHAUL=m
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_NAT is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_NAT is not set
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_REJECT_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_NAT_IPV4=m
# CONFIG_NFT_CHAIN_NAT_IPV4 is not set
# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_OSD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=m
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
# CONFIG_PATA_WINBOND_VLB is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
# CONFIG_CS89x0_PLATFORM is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=m
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
# CONFIG_MLX4_DEBUG is not set
# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2000=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_ULTRA=m
CONFIG_WD80x3=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=y
CONFIG_SFC_MCDI_MON=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=m
# CONFIG_STMMAC_PCI is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOATM is not set
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCMFMAC_PCIE is not set
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not set
# CONFIG_IPW2100_DEBUG is not set
# CONFIG_IPW2200 is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
# CONFIG_IWLWIFI_UAPSD is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_MESH is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
# CONFIG_RT2800PCI_RT35XX is not set
# CONFIG_RT2800PCI_RT53XX is not set
# CONFIG_RT2800PCI_RT3290 is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_RT3573 is not set
# CONFIG_RT2800USB_RT53XX is not set
# CONFIG_RT2800USB_RT55XX is not set
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
# CONFIG_RTL8723BE is not set
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
# CONFIG_RSI_91X is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_EBTAXI=m
CONFIG_EBTAXI_MAX_DEVS=64
CONFIG_EBTAXI_CHANNELS_PER_BOARD=2
CONFIG_EBTAXI_DEBUG=y
CONFIG_SABTECH=m
# CONFIG_SABTECH_METER_LOG_WORDS is not set
CONFIG_GOLDEN_TULIP=m
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_XEN=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INT340X_THERMAL is not set
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_XEN_WDT=y
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_UMS is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_GMA600 is not set
# CONFIG_DRM_GMA3600 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
# CONFIG_SND_ISA is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
CONFIG_SND_FM801=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_INPUT is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=m
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers
(HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD64 is not set
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_LINE6_USB is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_XGI is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_HP_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_CHROME_PLATFORMS is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_RUNTIME_MAP=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_EFIVAR_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_DEVICE_ASSIGNMENT=y
# CONFIG_LGUEST is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=m
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
---
Michael D Labriola
Electric Boat
mlabriol@gdeb.com
401-848-8871 (desk)
401-848-8513 (lab)
401-316-9844 (cell)
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-03-25 21:01 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-24 15:14 3.18 xen-pcifront regression? Michael D Labriola
2015-03-24 15:28 ` Konrad Rzeszutek Wilk
2015-03-24 17:27 ` Bjorn Helgaas
2015-03-24 17:27 ` [Xen-devel] " Bjorn Helgaas
2015-03-24 22:27 ` Michael D Labriola
2015-03-24 22:27 ` [Xen-devel] " Michael D Labriola
2015-03-24 23:31 ` Bjorn Helgaas
2015-03-24 23:31 ` Bjorn Helgaas
2015-03-25 20:27 ` [Xen-devel] " Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 20:40 ` Konrad Rzeszutek Wilk
2015-03-25 21:01 ` Michael D Labriola
2015-03-25 20:27 ` Konrad Rzeszutek Wilk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.