[PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD (0x10e8),
PCI_DEVICE_ID_ADDIDATA_APCI7800 (0x818e) to recognize the original
ADDI-DATA APCI-7800 PCI serial card.  However vendor ID 0x10e8 was
assigned by PCI-SIG to Applied Micro Circuits Corporation (AMCC) and the
associated device ID 0x818e was assigned by AMCC to ADDI-DATA.

Comedi already defines PCI_VENDOR_ID_AMCC as 0x10e8 in one of its header
files, so that definition can be moved into pci_ids.h and the 8250_pci
driver changed to use it.  The PCI_DEVICE_ID_ADDIDATA_APCI7800 define
seems out of place in pci_ids.h since it isn't associated with
ADDI-DATA's vendor ID but with AMCC's vendor ID.  It's only used in
8250_pci.c so it can be moved there and renamed to something more
sensible.

1) pci_ids.h: move PCI_VENDOR_ID_AMCC here
2) serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD
3) serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800
4) pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and
   PCI_DEVICE_ID_ADDIDATA_APCI7800

 drivers/staging/comedi/comedidev.h | 1 -
 drivers/tty/serial/8250/8250_pci.c | 9 +++++----
 include/linux/pci_ids.h            | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

[PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD (0x10e8),
PCI_DEVICE_ID_ADDIDATA_APCI7800 (0x818e) to recognize the original
ADDI-DATA APCI-7800 PCI serial card.  However vendor ID 0x10e8 was
assigned by PCI-SIG to Applied Micro Circuits Corporation (AMCC) and the
associated device ID 0x818e was assigned by AMCC to ADDI-DATA.

Comedi already defines PCI_VENDOR_ID_AMCC as 0x10e8 in one of its header
files, so that definition can be moved into pci_ids.h and the 8250_pci
driver changed to use it.  The PCI_DEVICE_ID_ADDIDATA_APCI7800 define
seems out of place in pci_ids.h since it isn't associated with
ADDI-DATA's vendor ID but with AMCC's vendor ID.  It's only used in
8250_pci.c so it can be moved there and renamed to something more
sensible.

1) pci_ids.h: move PCI_VENDOR_ID_AMCC here
2) serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD
3) serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800
4) pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and
   PCI_DEVICE_ID_ADDIDATA_APCI7800

 drivers/staging/comedi/comedidev.h | 1 -
 drivers/tty/serial/8250/8250_pci.c | 9 +++++----
 include/linux/pci_ids.h            | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

[PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD (0x10e8),
PCI_DEVICE_ID_ADDIDATA_APCI7800 (0x818e) to recognize the original
ADDI-DATA APCI-7800 PCI serial card.  However vendor ID 0x10e8 was
assigned by PCI-SIG to Applied Micro Circuits Corporation (AMCC) and the
associated device ID 0x818e was assigned by AMCC to ADDI-DATA.

Comedi already defines PCI_VENDOR_ID_AMCC as 0x10e8 in one of its header
files, so that definition can be moved into pci_ids.h and the 8250_pci
driver changed to use it.  The PCI_DEVICE_ID_ADDIDATA_APCI7800 define
seems out of place in pci_ids.h since it isn't associated with
ADDI-DATA's vendor ID but with AMCC's vendor ID.  It's only used in
8250_pci.c so it can be moved there and renamed to something more
sensible.

1) pci_ids.h: move PCI_VENDOR_ID_AMCC here
2) serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD
3) serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800
4) pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and
   PCI_DEVICE_ID_ADDIDATA_APCI7800

 drivers/staging/comedi/comedidev.h | 1 -
 drivers/tty/serial/8250/8250_pci.c | 9 +++++----
 include/linux/pci_ids.h            | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 1/4] pci_ids.h: move PCI_VENDOR_ID_AMCC here

[Ian Abbott]

PCI_VENDOR_ID_AMCC is defined locally in
"drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers,
namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also
"addi_apci_1710" but that is not currently built and will probably be
removed soon).  Move the define into "include/linux/pci_ids.h" as it is
shared by several drivers (albeit all comedi drivers currently).

PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as
PCI_VENDOR_ID_ADDIDATA_OLD.  The vendor ID is actually assigned to
Applied Micro Circuits Corporation and Addi-Data were using device IDs
assigned by AMCC on some of their earlier PCI boards. The
PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci"
PCI serial board driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/staging/comedi/comedidev.h | 1 -
 include/linux/pci_ids.h            | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index b75915f..9f4f73f 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -400,7 +400,6 @@ int comedi_driver_unregister(struct comedi_driver *);
  */
 #define PCI_VENDOR_ID_KOLTER		0x1001
 #define PCI_VENDOR_ID_ICP		0x104c
-#define PCI_VENDOR_ID_AMCC		0x10e8
 #define PCI_VENDOR_ID_DT		0x1116
 #define PCI_VENDOR_ID_IOTECH		0x1616
 #define PCI_VENDOR_ID_CONTEC		0x1221
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3bed2e8..9d99119 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1311,6 +1311,8 @@
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
 #define PCI_DEVICE_ID_IMS_TT3D		0x9135
 
+#define PCI_VENDOR_ID_AMCC		0x10e8
+
 #define PCI_VENDOR_ID_INTERG		0x10ea
 #define PCI_DEVICE_ID_INTERG_1682	0x1682
 #define PCI_DEVICE_ID_INTERG_2000	0x2000
@@ -2256,7 +2258,7 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
+#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
-- 
1.8.2.1

[PATCH 1/4] pci_ids.h: move PCI_VENDOR_ID_AMCC here

[Ian Abbott]

PCI_VENDOR_ID_AMCC is defined locally in
"drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers,
namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also
"addi_apci_1710" but that is not currently built and will probably be
removed soon).  Move the define into "include/linux/pci_ids.h" as it is
shared by several drivers (albeit all comedi drivers currently).

PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as
PCI_VENDOR_ID_ADDIDATA_OLD.  The vendor ID is actually assigned to
Applied Micro Circuits Corporation and Addi-Data were using device IDs
assigned by AMCC on some of their earlier PCI boards. The
PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci"
PCI serial board driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/staging/comedi/comedidev.h | 1 -
 include/linux/pci_ids.h            | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index b75915f..9f4f73f 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -400,7 +400,6 @@ int comedi_driver_unregister(struct comedi_driver *);
  */
 #define PCI_VENDOR_ID_KOLTER		0x1001
 #define PCI_VENDOR_ID_ICP		0x104c
-#define PCI_VENDOR_ID_AMCC		0x10e8
 #define PCI_VENDOR_ID_DT		0x1116
 #define PCI_VENDOR_ID_IOTECH		0x1616
 #define PCI_VENDOR_ID_CONTEC		0x1221
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3bed2e8..9d99119 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1311,6 +1311,8 @@
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
 #define PCI_DEVICE_ID_IMS_TT3D		0x9135
 
+#define PCI_VENDOR_ID_AMCC		0x10e8
+
 #define PCI_VENDOR_ID_INTERG		0x10ea
 #define PCI_DEVICE_ID_INTERG_1682	0x1682
 #define PCI_DEVICE_ID_INTERG_2000	0x2000
@@ -2256,7 +2258,7 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
+#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
-- 
1.8.2.1

[PATCH 1/4] pci_ids.h: move PCI_VENDOR_ID_AMCC here

[Ian Abbott]

PCI_VENDOR_ID_AMCC is defined locally in
"drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers,
namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also
"addi_apci_1710" but that is not currently built and will probably be
removed soon).  Move the define into "include/linux/pci_ids.h" as it is
shared by several drivers (albeit all comedi drivers currently).

PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as
PCI_VENDOR_ID_ADDIDATA_OLD.  The vendor ID is actually assigned to
Applied Micro Circuits Corporation and Addi-Data were using device IDs
assigned by AMCC on some of their earlier PCI boards. The
PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci"
PCI serial board driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/staging/comedi/comedidev.h | 1 -
 include/linux/pci_ids.h            | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index b75915f..9f4f73f 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -400,7 +400,6 @@ int comedi_driver_unregister(struct comedi_driver *);
  */
 #define PCI_VENDOR_ID_KOLTER		0x1001
 #define PCI_VENDOR_ID_ICP		0x104c
-#define PCI_VENDOR_ID_AMCC		0x10e8
 #define PCI_VENDOR_ID_DT		0x1116
 #define PCI_VENDOR_ID_IOTECH		0x1616
 #define PCI_VENDOR_ID_CONTEC		0x1221
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3bed2e8..9d99119 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1311,6 +1311,8 @@
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
 #define PCI_DEVICE_ID_IMS_TT3D		0x9135
 
+#define PCI_VENDOR_ID_AMCC		0x10e8
+
 #define PCI_VENDOR_ID_INTERG		0x10ea
 #define PCI_DEVICE_ID_INTERG_1682	0x1682
 #define PCI_DEVICE_ID_INTERG_2000	0x2000
@@ -2256,7 +2258,7 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
+#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
-- 
1.8.2.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 2/4] serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

PCI_VENDOR_ID_ADDIDATA_OLD has the same value (0x10e8) as
PCI_VENDOR_ID_AMCC in <linux/pci_ids.h>.  The vender ID is actually
assigned to Applied Micro Circuits Corporation.  The 8250_pci driver
uses PCI_VENDOR_ID_ADDIDATA_OLD in the lists of quirks and PCI IDs for
the ADDI-DATA APCI-7800 card.  Change it to use the more accurate
PCI_VENDOR_ID_AMCC.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c52948b..3e3d59b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1587,7 +1587,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	* ADDI-DATA GmbH communication cards <info@addi-data.com>
 	*/
 	{
-		.vendor         = PCI_VENDOR_ID_ADDIDATA_OLD,
+		.vendor         = PCI_VENDOR_ID_AMCC,
 		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
@@ -4697,7 +4697,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_b0_1_115200 },
 
-	{	PCI_VENDOR_ID_ADDIDATA_OLD,
+	{	PCI_VENDOR_ID_AMCC,
 		PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
-- 
1.8.2.1

[PATCH 2/4] serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

PCI_VENDOR_ID_ADDIDATA_OLD has the same value (0x10e8) as
PCI_VENDOR_ID_AMCC in <linux/pci_ids.h>.  The vender ID is actually
assigned to Applied Micro Circuits Corporation.  The 8250_pci driver
uses PCI_VENDOR_ID_ADDIDATA_OLD in the lists of quirks and PCI IDs for
the ADDI-DATA APCI-7800 card.  Change it to use the more accurate
PCI_VENDOR_ID_AMCC.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c52948b..3e3d59b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1587,7 +1587,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	* ADDI-DATA GmbH communication cards <info@addi-data.com>
 	*/
 	{
-		.vendor         = PCI_VENDOR_ID_ADDIDATA_OLD,
+		.vendor         = PCI_VENDOR_ID_AMCC,
 		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
@@ -4697,7 +4697,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_b0_1_115200 },
 
-	{	PCI_VENDOR_ID_ADDIDATA_OLD,
+	{	PCI_VENDOR_ID_AMCC,
 		PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
-- 
1.8.2.1

[PATCH 2/4] serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD

[Ian Abbott]

PCI_VENDOR_ID_ADDIDATA_OLD has the same value (0x10e8) as
PCI_VENDOR_ID_AMCC in <linux/pci_ids.h>.  The vender ID is actually
assigned to Applied Micro Circuits Corporation.  The 8250_pci driver
uses PCI_VENDOR_ID_ADDIDATA_OLD in the lists of quirks and PCI IDs for
the ADDI-DATA APCI-7800 card.  Change it to use the more accurate
PCI_VENDOR_ID_AMCC.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c52948b..3e3d59b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1587,7 +1587,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	* ADDI-DATA GmbH communication cards <info@addi-data.com>
 	*/
 	{
-		.vendor         = PCI_VENDOR_ID_ADDIDATA_OLD,
+		.vendor         = PCI_VENDOR_ID_AMCC,
 		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
@@ -4697,7 +4697,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_b0_1_115200 },
 
-	{	PCI_VENDOR_ID_ADDIDATA_OLD,
+	{	PCI_VENDOR_ID_AMCC,
 		PCI_DEVICE_ID_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
-- 
1.8.2.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 3/4] serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800

[Ian Abbott]

The quirks and PCI ID table entries for the original ADDI-DATA APCI-7800
(not the newer APCI-7800-3) use PCI_DEVICE_ID_ADDIDATA_APCI7800 from
<linux/pci_ids.h> but the device ID was actually assigned to ADDI-DATA
by Applied Micro Circuits Corporation (PCI_VENDOR_ID_AMCC).  Replace it
locally with #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 3e3d59b..e9b915c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1565,6 +1565,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
+#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1588,7 +1589,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	*/
 	{
 		.vendor         = PCI_VENDOR_ID_AMCC,
-		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		.device         = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
 		.setup          = addidata_apci7800_setup,
@@ -4698,7 +4699,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_b0_1_115200 },
 
 	{	PCI_VENDOR_ID_AMCC,
-		PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
 		0,
-- 
1.8.2.1

[PATCH 3/4] serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800

[Ian Abbott]

The quirks and PCI ID table entries for the original ADDI-DATA APCI-7800
(not the newer APCI-7800-3) use PCI_DEVICE_ID_ADDIDATA_APCI7800 from
<linux/pci_ids.h> but the device ID was actually assigned to ADDI-DATA
by Applied Micro Circuits Corporation (PCI_VENDOR_ID_AMCC).  Replace it
locally with #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 3e3d59b..e9b915c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1565,6 +1565,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
+#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1588,7 +1589,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	*/
 	{
 		.vendor         = PCI_VENDOR_ID_AMCC,
-		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		.device         = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
 		.setup          = addidata_apci7800_setup,
@@ -4698,7 +4699,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_b0_1_115200 },
 
 	{	PCI_VENDOR_ID_AMCC,
-		PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
 		0,
-- 
1.8.2.1

[PATCH 3/4] serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800

[Ian Abbott]

The quirks and PCI ID table entries for the original ADDI-DATA APCI-7800
(not the newer APCI-7800-3) use PCI_DEVICE_ID_ADDIDATA_APCI7800 from
<linux/pci_ids.h> but the device ID was actually assigned to ADDI-DATA
by Applied Micro Circuits Corporation (PCI_VENDOR_ID_AMCC).  Replace it
locally with #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/tty/serial/8250/8250_pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 3e3d59b..e9b915c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1565,6 +1565,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
+#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1588,7 +1589,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	*/
 	{
 		.vendor         = PCI_VENDOR_ID_AMCC,
-		.device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		.device         = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
 		.setup          = addidata_apci7800_setup,
@@ -4698,7 +4699,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_b0_1_115200 },
 
 	{	PCI_VENDOR_ID_AMCC,
-		PCI_DEVICE_ID_ADDIDATA_APCI7800,
+		PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
 		0,
-- 
1.8.2.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 4/4] pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and PCI_DEVICE_ID_ADDIDATA_APCI7800

[Ian Abbott]

These two defines are no longer used.  They were only used by the PCI
serial driver "8250_pci" to support the original ADDI-DATA APCI-7800
card.  In that driver, PCI_VENDOR_ID_ADDIDATA_OLD has been replaced with
PCI_VENDOR_ID_AMCC which has the same value (0x10e8), and
PCI_DEVICE_ID_ADDIDATA_APCI7800 has been replaced with a local #define
PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 with the same value (0x818e).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 include/linux/pci_ids.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d99119..6dec3d6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2258,12 +2258,10 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
-#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
-- 
1.8.2.1

[PATCH 4/4] pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and PCI_DEVICE_ID_ADDIDATA_APCI7800

[Ian Abbott]

These two defines are no longer used.  They were only used by the PCI
serial driver "8250_pci" to support the original ADDI-DATA APCI-7800
card.  In that driver, PCI_VENDOR_ID_ADDIDATA_OLD has been replaced with
PCI_VENDOR_ID_AMCC which has the same value (0x10e8), and
PCI_DEVICE_ID_ADDIDATA_APCI7800 has been replaced with a local #define
PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 with the same value (0x818e).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 include/linux/pci_ids.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d99119..6dec3d6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2258,12 +2258,10 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
-#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
-- 
1.8.2.1

[PATCH 4/4] pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and PCI_DEVICE_ID_ADDIDATA_APCI7800

[Ian Abbott]

These two defines are no longer used.  They were only used by the PCI
serial driver "8250_pci" to support the original ADDI-DATA APCI-7800
card.  In that driver, PCI_VENDOR_ID_ADDIDATA_OLD has been replaced with
PCI_VENDOR_ID_AMCC which has the same value (0x10e8), and
PCI_DEVICE_ID_ADDIDATA_APCI7800 has been replaced with a local #define
PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 with the same value (0x818e).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 include/linux/pci_ids.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d99119..6dec3d6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2258,12 +2258,10 @@
 /*
  * ADDI-DATA GmbH communication cards <info@addi-data.com>
  */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8	/* actually AMCC */
 #define PCI_VENDOR_ID_ADDIDATA                 0x15B8
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
-#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
 #define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
-- 
1.8.2.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[Bjorn Helgaas]

On Tue, Jul 16, 2013 at 9:14 AM, Ian Abbott <abbotti@mev.co.uk> wrote:
> The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD (0x10e8),
> PCI_DEVICE_ID_ADDIDATA_APCI7800 (0x818e) to recognize the original
> ADDI-DATA APCI-7800 PCI serial card.  However vendor ID 0x10e8 was
> assigned by PCI-SIG to Applied Micro Circuits Corporation (AMCC) and the
> associated device ID 0x818e was assigned by AMCC to ADDI-DATA.
>
> Comedi already defines PCI_VENDOR_ID_AMCC as 0x10e8 in one of its header
> files, so that definition can be moved into pci_ids.h and the 8250_pci
> driver changed to use it.  The PCI_DEVICE_ID_ADDIDATA_APCI7800 define
> seems out of place in pci_ids.h since it isn't associated with
> ADDI-DATA's vendor ID but with AMCC's vendor ID.  It's only used in
> 8250_pci.c so it can be moved there and renamed to something more
> sensible.
>
> 1) pci_ids.h: move PCI_VENDOR_ID_AMCC here
> 2) serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD
> 3) serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800
> 4) pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and
>    PCI_DEVICE_ID_ADDIDATA_APCI7800
>
>  drivers/staging/comedi/comedidev.h | 1 -
>  drivers/tty/serial/8250/8250_pci.c | 9 +++++----
>  include/linux/pci_ids.h            | 4 ++--
>  3 files changed, 7 insertions(+), 7 deletions(-)

For patches 1 & 4 (the ones that touch pci_ids.h):

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Please merge them along with the 8250 changes.

Re: [PATCH 0/4] pci_ids, 8250_pci: remove PCI_VENDOR_ID_ADDIDATA_OLD

[Greg Kroah-Hartman]

On Fri, Jul 19, 2013 at 03:37:26PM -0600, Bjorn Helgaas wrote:
> On Tue, Jul 16, 2013 at 9:14 AM, Ian Abbott <abbotti@mev.co.uk> wrote:
> > The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD (0x10e8),
> > PCI_DEVICE_ID_ADDIDATA_APCI7800 (0x818e) to recognize the original
> > ADDI-DATA APCI-7800 PCI serial card.  However vendor ID 0x10e8 was
> > assigned by PCI-SIG to Applied Micro Circuits Corporation (AMCC) and the
> > associated device ID 0x818e was assigned by AMCC to ADDI-DATA.
> >
> > Comedi already defines PCI_VENDOR_ID_AMCC as 0x10e8 in one of its header
> > files, so that definition can be moved into pci_ids.h and the 8250_pci
> > driver changed to use it.  The PCI_DEVICE_ID_ADDIDATA_APCI7800 define
> > seems out of place in pci_ids.h since it isn't associated with
> > ADDI-DATA's vendor ID but with AMCC's vendor ID.  It's only used in
> > 8250_pci.c so it can be moved there and renamed to something more
> > sensible.
> >
> > 1) pci_ids.h: move PCI_VENDOR_ID_AMCC here
> > 2) serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD
> > 3) serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800
> > 4) pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and
> >    PCI_DEVICE_ID_ADDIDATA_APCI7800
> >
> >  drivers/staging/comedi/comedidev.h | 1 -
> >  drivers/tty/serial/8250/8250_pci.c | 9 +++++----
> >  include/linux/pci_ids.h            | 4 ++--
> >  3 files changed, 7 insertions(+), 7 deletions(-)
> 
> For patches 1 & 4 (the ones that touch pci_ids.h):
> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> Please merge them along with the 8250 changes.

Thanks, will do.

greg k-h