* [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults)
@ 2017-02-08 11:30 Vincent McIntyre
2017-02-08 13:37 ` Sean Young
2017-02-15 15:14 ` Sean Young
0 siblings, 2 replies; 5+ messages in thread
From: Vincent McIntyre @ 2017-02-08 11:30 UTC (permalink / raw)
To: linux-media; +Cc: Sean Young
[-- Attachment #1: Type: text/plain, Size: 3259 bytes --]
Hi
I have been working with Sean on figuring out the protocol used by a
dvico remote.
I thought the patch he sent was at fault but I backed it out and tried again.
I've attached a full dmesg but the core of it is when dvb_usb_cxusb
tries to load:
[ 7.858907] WARNING: You are using an experimental version of the
media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
47b037a0512d9f8675ec2693bed46c8ea6a884ab [media]
v4l2-async: failing functions shouldn't have side effects
79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media]
mantis_dvb: fix some error codes in mantis_dvb_init()
c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media]
exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
[ 7.861968] dvb_usb_af9035 1-4:1.0: prechip_version=83
chip_version=02 chip_type=9135
[ 7.887476] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_generic_rw
[ 7.887477] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
[ 7.887499] dvb_usb_cxusb: disagrees about version of symbol rc_keydown
[ 7.887500] dvb_usb_cxusb: Unknown symbol rc_keydown (err -22)
[ 7.887507] dvb_usb_cxusb: disagrees about version of symbol
dib0070_wbd_offset
[ 7.887508] dvb_usb_cxusb: Unknown symbol dib0070_wbd_offset (err -22)
[ 7.887513] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_device_init
[ 7.887514] dvb_usb_cxusb: Unknown symbol dvb_usb_device_init (err -22)
[ 7.887518] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_generic_write
[ 7.887519] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_write (err -22)
[ 7.900099] usb 1-4: dvb_usb_v2: found a 'Leadtek WinFast DTV
Dongle Dual' in cold state
[ 7.900768] usb 1-4: dvb_usb_v2: downloading firmware from file
'dvb-usb-it9135-02.fw'
[ 8.124533] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 8.124616] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 8.124690] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 8.124763] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.144601] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_generic_rw
[ 8.144603] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
[ 8.144638] dvb_usb_cxusb: disagrees about version of symbol rc_keydown
[ 8.144639] dvb_usb_cxusb: Unknown symbol rc_keydown (err -22)
[ 8.144648] dvb_usb_cxusb: disagrees about version of symbol
dib0070_wbd_offset
[ 8.144649] dvb_usb_cxusb: Unknown symbol dib0070_wbd_offset (err -22)
[ 8.144654] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_device_init
[ 8.144655] dvb_usb_cxusb: Unknown symbol dvb_usb_device_init (err -22)
[ 8.144659] dvb_usb_cxusb: disagrees about version of symbol
dvb_usb_generic_write
[ 8.144660] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_write (err -22)
Vince
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 81791 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=420e8415-6799-4f8e-bb39-7d9077271ea6 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ed12fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ed13000-0x000000007ed14fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ed15000-0x000000007ee2dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ee2e000-0x000000007eee4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007eee5000-0x000000007eee8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eee9000-0x000000007eef2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eef3000-0x000000007eef3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eef4000-0x000000007eefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eeff000-0x000000007eefffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ef00000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: /DG33BU, BIOS DPP3510J.86A.0293.2007.1002.1519 10/02/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ef00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 07EF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2032MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 2031MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2031M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2031MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2032MB, range: 16MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x339be000-0x35cd6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 0x000000007EEFD038 000060 (v01 INTEL DG33BU 00000125 01000013)
[ 0.000000] ACPI: FACP 0x000000007EEFC000 000074 (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x000000007EEF8000 003D05 (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x000000007EE99000 000040
[ 0.000000] ACPI: APIC 0x000000007EEF7000 000078 (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: WDDT 0x000000007EEF6000 000040 (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x000000007EEF5000 00003C (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: ASF! 0x000000007EEF4000 0000A6 (v32 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: DMAR 0x000000007EEF2000 000128 (v01 INTEL DG33BU 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEF1000 000204 (v01 INTEL CpuPm 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEF0000 000175 (v01 INTEL Cpu0Ist 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEEF000 000175 (v01 INTEL Cpu1Ist 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEEE000 000175 (v01 INTEL Cpu2Ist 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEED000 000175 (v01 INTEL Cpu3Ist 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEEC000 0000DD (v01 INTEL Cpu0Cst 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEEB000 0000DD (v01 INTEL Cpu1Cst 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEEA000 0000DD (v01 INTEL Cpu2Cst 00000125 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x000000007EEE9000 0000DD (v01 INTEL Cpu3Cst 00000125 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007eefffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7ee29000-0x7ee2dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007eefffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ed12fff]
[ 0.000000] node 0: [mem 0x000000007ed15000-0x000000007ee2dfff]
[ 0.000000] node 0: [mem 0x000000007eee5000-0x000000007eee8fff]
[ 0.000000] node 0: [mem 0x000000007eef3000-0x000000007eef3fff]
[ 0.000000] node 0: [mem 0x000000007eeff000-0x000000007eefffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007eefffff]
[ 0.000000] On node 0 totalpages: 519631
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8060 pages used for memmap
[ 0.000000] DMA32 zone: 515634 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ed13000-0x7ed14fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ee2e000-0x7eee4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eee9000-0x7eef2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eef4000-0x7eefefff]
[ 0.000000] e820: [mem 0x7f000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007ea00000 s98264 r8192 d28712 u524288
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 511486
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=420e8415-6799-4f8e-bb39-7d9077271ea6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at /build/linux-EO9xOi/linux-4.4.0/drivers/iommu/dmar.c:830 warn_invalid_dmar+0x79/0x90()
[ 0.000000] Your BIOS is broken; DMAR reported at address feb00000 returns all ones!
BIOS vendor: Intel Corp.; Ver: DPP3510J.86A.0293.2007.1002.1519; Product Version:
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-59-generic #80-Ubuntu
[ 0.000000] Hardware name: /DG33BU, BIOS DPP3510J.86A.0293.2007.1002.1519 10/02/2007
[ 0.000000] 0000000000000086 29a630b03aad7f1d ffffffff81e03d40 ffffffff813f7583
[ 0.000000] ffffffff81e03d88 ffffffff81d36bf0 ffffffff81e03d78 ffffffff810812d2
[ 0.000000] 00000000feb00000 ffffffff81d0e0a9 ffffffff8220a00c ffffffff81abce58
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff813f7583>] dump_stack+0x63/0x90
[ 0.000000] [<ffffffff810812d2>] warn_slowpath_common+0x82/0xc0
[ 0.000000] [<ffffffff810813e4>] warn_slowpath_fmt_taint+0x54/0x70
[ 0.000000] [<ffffffff81f91513>] ? __early_ioremap+0x13e/0x1be
[ 0.000000] [<ffffffff81542269>] warn_invalid_dmar+0x79/0x90
[ 0.000000] [<ffffffff8182f5e6>] dmar_validate_one_drhd+0x86/0xc0
[ 0.000000] [<ffffffff815423e2>] dmar_walk_remapping_entries+0x82/0x190
[ 0.000000] [<ffffffff81fae391>] detect_intel_iommu+0x61/0xf2
[ 0.000000] [<ffffffff8182f560>] ? xen_swiotlb_init+0x4a0/0x4a0
[ 0.000000] [<ffffffff81f6bc41>] pci_iommu_alloc+0x50/0x6c
[ 0.000000] [<ffffffff81f7af7d>] mem_init+0x17/0x9d
[ 0.000000] [<ffffffff81f5cde9>] start_kernel+0x259/0x4a2
[ 0.000000] [<ffffffff81f5c120>] ? early_idt_handler_array+0x120/0x120
[ 0.000000] [<ffffffff81f5c339>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff81f5c485>] x86_64_start_kernel+0x14a/0x16d
[ 0.000000] ---[ end trace f959d5c84da9892e ]---
[ 0.000000] Memory: 1990436K/2078524K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 88088K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2333.041 MHz processor
[ 0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.08 BogoMIPS (lpj=9332164)
[ 0.008119] pid_max: default: 32768 minimum: 301
[ 0.008176] ACPI: Core revision 20150930
[ 0.016900] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.017041] Security Framework initialized
[ 0.017094] Yama: becoming mindful.
[ 0.017167] AppArmor: AppArmor initialized
[ 0.017410] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.018340] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.018925] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.018984] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.019348] Initializing cgroup subsys io
[ 0.019405] Initializing cgroup subsys memory
[ 0.019467] Initializing cgroup subsys devices
[ 0.019522] Initializing cgroup subsys freezer
[ 0.019575] Initializing cgroup subsys net_cls
[ 0.019629] Initializing cgroup subsys perf_event
[ 0.019683] Initializing cgroup subsys net_prio
[ 0.019739] Initializing cgroup subsys hugetlb
[ 0.019792] Initializing cgroup subsys pids
[ 0.019867] CPU: Physical Processor ID: 0
[ 0.019917] CPU: Processor Core ID: 0
[ 0.019969] mce: CPU supports 6 MCE banks
[ 0.020013] CPU0: Thermal monitoring enabled (TM2)
[ 0.020069] process: using mwait in idle threads
[ 0.020124] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.020177] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.020580] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[ 0.024005] ftrace: allocating 32064 entries in 126 pages
[ 0.036113] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.040062] smpboot: Max logical packages: 2
[ 0.040132] DMAR: Host address width 36
[ 0.040183] DMAR: DRHD base: 0x000000feb00000 flags: 0x0
[ 0.040245] DMAR: Failed to map dmar0
[ 0.040296] DMAR: Parse DMAR table failure.
[ 0.040706] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.084000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.084000] core: PEBS disabled due to CPU errata
[ 0.084000] ... version: 2
[ 0.084000] ... bit width: 40
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 000000ffffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 3
[ 0.084000] ... event mask: 0000000700000003
[ 0.084000] x86: Booting SMP configuration:
[ 0.084000] .... node #0, CPUs: #1
[ 0.084048] x86: Booted up 1 node, 2 CPUs
[ 0.084152] smpboot: Total of 2 processors activated (9332.16 BogoMIPS)
[ 0.085948] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.086153] devtmpfs: initialized
[ 0.089465] evm: security.selinux
[ 0.089516] evm: security.SMACK64
[ 0.089565] evm: security.SMACK64EXEC
[ 0.089615] evm: security.SMACK64TRANSMUTE
[ 0.089665] evm: security.SMACK64MMAP
[ 0.089715] evm: security.ima
[ 0.089764] evm: security.capability
[ 0.089867] PM: Registering ACPI NVS region [mem 0x7ee2e000-0x7eee4fff] (749568 bytes)
[ 0.090033] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.090146] pinctrl core: initialized pinctrl subsystem
[ 0.090146] RTC time: 11:16:59, date: 02/08/17
[ 0.090146] NET: Registered protocol family 16
[ 0.100006] cpuidle: using governor ladder
[ 0.108004] cpuidle: using governor menu
[ 0.108059] PCCT header not found.
[ 0.108164] ACPI: bus type PCI registered
[ 0.108217] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108360] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.108435] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.108496] PCI: Using configuration type 1 for base access
[ 0.116093] ACPI: Added _OSI(Module Device)
[ 0.116145] ACPI: Added _OSI(Processor Device)
[ 0.116197] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116249] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.118767] ACPI: Interpreter enabled
[ 0.118836] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.118888] ACPI: Using IOAPIC for interrupt routing
[ 0.118962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.125180] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125240] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125316] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.125378] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.126206] PCI host bridge to bus 0000:00
[ 0.126259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.126316] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.126372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.126443] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[ 0.126513] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff window]
[ 0.126584] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff window]
[ 0.126655] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.126716] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.126827] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.126865] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.126913] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.127018] pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000
[ 0.127036] pci 0000:00:03.0: reg 0x10: [mem 0x93326100-0x9332610f 64bit]
[ 0.127072] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.127181] pci 0000:00:19.0: [8086:294c] type 00 class 0x020000
[ 0.127205] pci 0000:00:19.0: reg 0x10: [mem 0x93300000-0x9331ffff]
[ 0.127213] pci 0000:00:19.0: reg 0x14: [mem 0x93324000-0x93324fff]
[ 0.127221] pci 0000:00:19.0: reg 0x18: [io 0x4400-0x441f]
[ 0.127267] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.127313] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.127417] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.127461] pci 0000:00:1a.0: reg 0x20: [io 0x40e0-0x40ff]
[ 0.127550] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.127653] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.127697] pci 0000:00:1a.1: reg 0x20: [io 0x40c0-0x40df]
[ 0.127785] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.127889] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.127932] pci 0000:00:1a.2: reg 0x20: [io 0x40a0-0x40bf]
[ 0.128023] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.128133] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.128159] pci 0000:00:1a.7: reg 0x10: [mem 0x93325c00-0x93325fff]
[ 0.128228] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.128294] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.128399] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.128424] pci 0000:00:1b.0: reg 0x10: [mem 0x93320000-0x93323fff 64bit]
[ 0.128481] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.128548] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.128652] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.128711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.128761] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.128865] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.128929] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.128979] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.129081] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.129140] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.129189] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.129291] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.129350] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.129400] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.129503] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.129562] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.129612] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.129716] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.129760] pci 0000:00:1d.0: reg 0x20: [io 0x4080-0x409f]
[ 0.129848] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.129951] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.129994] pci 0000:00:1d.1: reg 0x20: [io 0x4060-0x407f]
[ 0.130081] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.130185] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.130228] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f]
[ 0.130315] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.130423] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.130450] pci 0000:00:1d.7: reg 0x10: [mem 0x93325800-0x93325bff]
[ 0.130519] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.130585] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.130687] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.130773] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.130878] pci 0000:00:1f.0: [8086:2912] type 00 class 0x060100
[ 0.130959] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
[ 0.131039] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.131098] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.131170] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[ 0.131340] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.131363] pci 0000:00:1f.2: reg 0x10: [io 0x4428-0x442f]
[ 0.131371] pci 0000:00:1f.2: reg 0x14: [io 0x4434-0x4437]
[ 0.131378] pci 0000:00:1f.2: reg 0x18: [io 0x4420-0x4427]
[ 0.131386] pci 0000:00:1f.2: reg 0x1c: [io 0x4430-0x4433]
[ 0.131393] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.131401] pci 0000:00:1f.2: reg 0x24: [mem 0x93325000-0x933257ff]
[ 0.131431] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.131520] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.131537] pci 0000:00:1f.3: reg 0x10: [mem 0x93326000-0x933260ff 64bit]
[ 0.131556] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.131693] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000
[ 0.131713] pci 0000:01:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.131723] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.131733] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.131740] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.131748] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.131830] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.131848] pci 0000:01:00.1: reg 0x10: [mem 0x93000000-0x93003fff]
[ 0.131965] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.132004] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.132007] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.132011] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.132057] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.132114] pci 0000:00:1c.0: bridge window [mem 0x93400000-0x934fffff]
[ 0.132178] pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f
[ 0.132211] pci 0000:03:00.0: reg 0x10: [io 0x2018-0x201f]
[ 0.132223] pci 0000:03:00.0: reg 0x14: [io 0x2024-0x2027]
[ 0.132235] pci 0000:03:00.0: reg 0x18: [io 0x2010-0x2017]
[ 0.132246] pci 0000:03:00.0: reg 0x1c: [io 0x2020-0x2023]
[ 0.132258] pci 0000:03:00.0: reg 0x20: [io 0x2000-0x200f]
[ 0.132269] pci 0000:03:00.0: reg 0x24: [mem 0x93200000-0x932001ff]
[ 0.132321] pci 0000:03:00.0: supports D1
[ 0.132323] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.132385] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.132468] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.132523] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.132527] pci 0000:00:1c.1: bridge window [mem 0x93200000-0x932fffff]
[ 0.132576] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.132632] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x935fffff]
[ 0.132682] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.132739] pci 0000:00:1c.3: bridge window [mem 0x93600000-0x936fffff]
[ 0.132788] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.132845] pci 0000:00:1c.4: bridge window [mem 0x93700000-0x937fffff]
[ 0.132891] pci 0000:07:01.0: [1106:3038] type 00 class 0x0c0300
[ 0.132940] pci 0000:07:01.0: reg 0x20: [io 0x1020-0x103f]
[ 0.132977] pci 0000:07:01.0: supports D1 D2
[ 0.132979] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133036] pci 0000:07:01.1: [1106:3038] type 00 class 0x0c0300
[ 0.133085] pci 0000:07:01.1: reg 0x20: [io 0x1000-0x101f]
[ 0.133122] pci 0000:07:01.1: supports D1 D2
[ 0.133124] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133181] pci 0000:07:01.2: [1106:3104] type 00 class 0x0c0320
[ 0.133202] pci 0000:07:01.2: reg 0x10: [mem 0x93104800-0x931048ff]
[ 0.133267] pci 0000:07:01.2: supports D1 D2
[ 0.133269] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133332] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.133354] pci 0000:07:03.0: reg 0x10: [mem 0x93104000-0x931047ff]
[ 0.133364] pci 0000:07:03.0: reg 0x14: [mem 0x93100000-0x93103fff]
[ 0.133424] pci 0000:07:03.0: supports D1 D2
[ 0.133427] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.133507] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.133565] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.133569] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.133575] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.133577] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.133580] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.133582] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[ 0.133585] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff window] (subtractive decode)
[ 0.133587] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff window] (subtractive decode)
[ 0.133690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.134110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.134524] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.134938] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.135351] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.135764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.136197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.136610] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.137473] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.137699] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.137699] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.137699] vgaarb: loaded
[ 0.137699] vgaarb: bridge control possible 0000:01:00.0
[ 0.137699] SCSI subsystem initialized
[ 0.137699] libata version 3.00 loaded.
[ 0.137699] ACPI: bus type USB registered
[ 0.137699] usbcore: registered new interface driver usbfs
[ 0.137699] usbcore: registered new interface driver hub
[ 0.137699] usbcore: registered new device driver usb
[ 0.137699] PCI: Using ACPI for IRQ routing
[ 0.141372] PCI: pci_cache_line_size set to 64 bytes
[ 0.141435] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.141437] e820: reserve RAM buffer [mem 0x7ed13000-0x7fffffff]
[ 0.141439] e820: reserve RAM buffer [mem 0x7ee2e000-0x7fffffff]
[ 0.141441] e820: reserve RAM buffer [mem 0x7eee9000-0x7fffffff]
[ 0.141443] e820: reserve RAM buffer [mem 0x7eef4000-0x7fffffff]
[ 0.141445] e820: reserve RAM buffer [mem 0x7ef00000-0x7fffffff]
[ 0.141583] NetLabel: Initializing
[ 0.141634] NetLabel: domain hash size = 128
[ 0.141684] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.141751] NetLabel: unlabeled traffic allowed by default
[ 0.141827] amd_nb: Cannot enumerate AMD northbridges
[ 0.141827] clocksource: Switched to clocksource refined-jiffies
[ 0.151054] AppArmor: AppArmor Filesystem Enabled
[ 0.151197] pnp: PnP ACPI init
[ 0.151384] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.151441] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.151498] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.151554] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.151611] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.151667] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.151723] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.151779] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.151835] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
[ 0.151891] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.151948] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.152007] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.152066] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152239] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.152306] system 00:02: [io 0x0500-0x053f] has been reserved
[ 0.152362] system 00:02: [io 0x0400-0x047f] could not be reserved
[ 0.152418] system 00:02: [io 0x0680-0x06ff] has been reserved
[ 0.152474] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152567] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152938] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.153010] pnp: PnP ACPI: found 5 devices
[ 0.159627] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.159712] clocksource: Switched to clocksource acpi_pm
[ 0.159771] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.159862] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.159866] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.159877] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.159884] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.159887] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.159895] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.159898] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.159905] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.159908] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[ 0.159921] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.159979] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159982] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159985] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159988] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159991] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159993] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159996] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159999] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159999] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159999] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.159999] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.159999] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.159999] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.159999] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.159999] pci 0000:00:1c.4: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.159999] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref]
[ 0.159999] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.159999] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.159999] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.159999] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.159999] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.159999] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.159999] pci 0000:00:1c.0: bridge window [mem 0x93400000-0x934fffff]
[ 0.159999] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.159999] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.160034] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.160091] pci 0000:00:1c.1: bridge window [mem 0x93200000-0x932fffff]
[ 0.160149] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.160223] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.160277] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.160334] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x935fffff]
[ 0.160392] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.160466] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.160520] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
[ 0.160577] pci 0000:00:1c.3: bridge window [mem 0x93600000-0x936fffff]
[ 0.160634] pci 0000:00:1c.3: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.160708] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.160762] pci 0000:00:1c.4: bridge window [io 0x8000-0x8fff]
[ 0.160819] pci 0000:00:1c.4: bridge window [mem 0x93700000-0x937fffff]
[ 0.160877] pci 0000:00:1c.4: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.160952] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.161006] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.161063] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.161125] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.161127] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.161130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.161132] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[ 0.161134] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff window]
[ 0.161137] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff window]
[ 0.161139] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.161141] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff]
[ 0.161144] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.161146] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.161148] pci_bus 0000:02: resource 1 [mem 0x93400000-0x934fffff]
[ 0.161150] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.161153] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.161155] pci_bus 0000:03: resource 1 [mem 0x93200000-0x932fffff]
[ 0.161157] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.161159] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
[ 0.161161] pci_bus 0000:04: resource 1 [mem 0x93500000-0x935fffff]
[ 0.161164] pci_bus 0000:04: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.161166] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.161168] pci_bus 0000:05: resource 1 [mem 0x93600000-0x936fffff]
[ 0.161170] pci_bus 0000:05: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.161172] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 0.161175] pci_bus 0000:06: resource 1 [mem 0x93700000-0x937fffff]
[ 0.161177] pci_bus 0000:06: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.161179] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.161181] pci_bus 0000:07: resource 1 [mem 0x93100000-0x931fffff]
[ 0.161183] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.161186] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.161188] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.161190] pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff window]
[ 0.161193] pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff window]
[ 0.161195] pci_bus 0000:07: resource 9 [mem 0x80000000-0xefffffff window]
[ 0.161233] NET: Registered protocol family 2
[ 0.161485] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.161615] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.161762] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.161861] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.161928] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.162040] NET: Registered protocol family 1
[ 0.164302] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.164832] PCI: CLS 64 bytes, default 64
[ 0.164888] Trying to unpack rootfs image as initramfs...
[ 0.828330] Freeing initrd memory: 35940K (ffff8800339be000 - ffff880035cd7000)
[ 0.828636] Scanning for low memory corruption every 60 seconds
[ 0.829139] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.829243] audit: initializing netlink subsys (disabled)
[ 0.829324] audit: type=2000 audit(1486552619.827:1): initialized
[ 0.829764] Initialise system trusted keyring
[ 0.829974] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.832300] zbud: loaded
[ 0.832563] VFS: Disk quotas dquot_6.6.0
[ 0.832660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.833088] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.833468] fuse init (API version 7.23)
[ 0.833694] Key type big_key registered
[ 0.833762] Allocating IMA MOK and blacklist keyrings.
[ 0.834317] Key type asymmetric registered
[ 0.834372] Asymmetric key parser 'x509' registered
[ 0.834475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.834581] io scheduler noop registered
[ 0.834634] io scheduler deadline registered (default)
[ 0.834728] io scheduler cfq registered
[ 0.835145] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.835577] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.835832] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.836095] pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.836352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.836413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.836513] intel_idle: does not run on family 6 model 15
[ 0.836602] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.836677] ACPI: Sleep Button [SLPB]
[ 0.836784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.836856] ACPI: Power Button [PWRF]
[ 0.836984] Monitor-Mwait will be used to enter C-1 state
[ 0.837214] GHES: HEST is not enabled!
[ 0.837380] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.857797] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.859731] Linux agpgart interface v0.103
[ 0.863271] brd: module loaded
[ 0.864785] loop: module loaded
[ 0.865123] libphy: Fixed MDIO Bus: probed
[ 0.865177] tun: Universal TUN/TAP device driver, 1.6
[ 0.865230] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.865334] PPP generic driver version 2.4.2
[ 0.865459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.865519] ehci-pci: EHCI PCI platform driver
[ 0.865763] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.865823] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.865903] ehci-pci 0000:00:1a.7: debug port 1
[ 0.869856] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.869873] ehci-pci 0000:00:1a.7: irq 17, io mem 0x93325c00
[ 0.880032] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.880160] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880218] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880289] usb usb1: Product: EHCI Host Controller
[ 0.880342] usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
[ 0.880397] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.880584] hub 1-0:1.0: USB hub found
[ 0.880642] hub 1-0:1.0: 6 ports detected
[ 0.881019] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.881078] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.881157] ehci-pci 0000:00:1d.7: debug port 1
[ 0.885113] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.885124] ehci-pci 0000:00:1d.7: irq 23, io mem 0x93325800
[ 0.896048] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.896141] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.896199] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.896276] usb usb2: Product: EHCI Host Controller
[ 0.896329] usb usb2: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
[ 0.896384] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.896559] hub 2-0:1.0: USB hub found
[ 0.896615] hub 2-0:1.0: 6 ports detected
[ 0.896942] ehci-pci 0000:07:01.2: EHCI Host Controller
[ 0.897001] ehci-pci 0000:07:01.2: new USB bus registered, assigned bus number 3
[ 0.897104] ehci-pci 0000:07:01.2: irq 20, io mem 0x93104800
[ 0.908046] ehci-pci 0000:07:01.2: USB 2.0 started, EHCI 1.00
[ 0.908147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.908205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908282] usb usb3: Product: EHCI Host Controller
[ 0.908335] usb usb3: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
[ 0.908390] usb usb3: SerialNumber: 0000:07:01.2
[ 0.908562] hub 3-0:1.0: USB hub found
[ 0.908621] hub 3-0:1.0: 4 ports detected
[ 0.908810] ehci-platform: EHCI generic platform driver
[ 0.908877] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908935] ohci-pci: OHCI PCI platform driver
[ 0.909000] ohci-platform: OHCI generic platform driver
[ 0.909065] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.909263] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.909321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 0.909396] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.909470] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0
[ 0.909569] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.909625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.909696] usb usb4: Product: UHCI Host Controller
[ 0.909748] usb usb4: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.909804] usb usb4: SerialNumber: 0000:00:1a.0
[ 0.909971] hub 4-0:1.0: USB hub found
[ 0.910029] hub 4-0:1.0: 2 ports detected
[ 0.910311] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.910369] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
[ 0.910444] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.910519] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 0.910616] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.910673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.910744] usb usb5: Product: UHCI Host Controller
[ 0.910796] usb usb5: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.910852] usb usb5: SerialNumber: 0000:00:1a.1
[ 0.911024] hub 5-0:1.0: USB hub found
[ 0.911080] hub 5-0:1.0: 2 ports detected
[ 0.911354] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.911413] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
[ 0.911489] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.911557] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0
[ 0.911654] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.911711] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.911782] usb usb6: Product: UHCI Host Controller
[ 0.911835] usb usb6: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.911890] usb usb6: SerialNumber: 0000:00:1a.2
[ 0.912067] hub 6-0:1.0: USB hub found
[ 0.912124] hub 6-0:1.0: 2 ports detected
[ 0.912403] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.912463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
[ 0.912538] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.912606] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 0.912703] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.912760] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.912830] usb usb7: Product: UHCI Host Controller
[ 0.912883] usb usb7: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.912938] usb usb7: SerialNumber: 0000:00:1d.0
[ 0.915598] hub 7-0:1.0: USB hub found
[ 0.915656] hub 7-0:1.0: 2 ports detected
[ 0.915933] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.915991] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
[ 0.916082] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.916155] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 0.916252] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916309] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916379] usb usb8: Product: UHCI Host Controller
[ 0.916432] usb usb8: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.916487] usb usb8: SerialNumber: 0000:00:1d.1
[ 0.916657] hub 8-0:1.0: USB hub found
[ 0.916714] hub 8-0:1.0: 2 ports detected
[ 0.916992] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.917051] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
[ 0.917125] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.917193] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 0.917290] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.917347] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917417] usb usb9: Product: UHCI Host Controller
[ 0.917470] usb usb9: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.917526] usb usb9: SerialNumber: 0000:00:1d.2
[ 0.917704] hub 9-0:1.0: USB hub found
[ 0.917760] hub 9-0:1.0: 2 ports detected
[ 0.918008] uhci_hcd 0000:07:01.0: UHCI Host Controller
[ 0.918067] uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 10
[ 0.918141] uhci_hcd 0000:07:01.0: detected 2 ports
[ 0.918217] uhci_hcd 0000:07:01.0: irq 22, io base 0x00001020
[ 0.918313] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.918370] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918441] usb usb10: Product: UHCI Host Controller
[ 0.918494] usb usb10: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.918549] usb usb10: SerialNumber: 0000:07:01.0
[ 0.918717] hub 10-0:1.0: USB hub found
[ 0.918774] hub 10-0:1.0: 2 ports detected
[ 0.919019] uhci_hcd 0000:07:01.1: UHCI Host Controller
[ 0.919077] uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 11
[ 0.919152] uhci_hcd 0000:07:01.1: detected 2 ports
[ 0.919219] uhci_hcd 0000:07:01.1: irq 21, io base 0x00001000
[ 0.919318] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.919375] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.919445] usb usb11: Product: UHCI Host Controller
[ 0.919498] usb usb11: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 0.919553] usb usb11: SerialNumber: 0000:07:01.1
[ 0.919726] hub 11-0:1.0: USB hub found
[ 0.919782] hub 11-0:1.0: 2 ports detected
[ 0.919993] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.923295] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.923351] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.923570] mousedev: PS/2 mouse device common for all mice
[ 0.923788] rtc_cmos 00:01: RTC can wake from S4
[ 0.923961] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.924050] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 0.924112] i2c /dev entries driver
[ 0.924231] device-mapper: uevent: version 1.0.3
[ 0.924364] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.924452] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.924914] NET: Registered protocol family 10
[ 0.925178] NET: Registered protocol family 17
[ 0.925243] Key type dns_resolver registered
[ 0.925481] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3
[ 0.925540] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3
[ 0.925632] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.925883] registered taskstats version 1
[ 0.925951] Loading compiled-in X.509 certificates
[ 0.927173] Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
[ 0.927264] zswap: loaded using pool lzo/zbud
[ 0.929717] Key type trusted registered
[ 0.933851] Key type encrypted registered
[ 0.933909] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.933965] ima: No TPM chip found, activating TPM-bypass!
[ 0.934039] evm: HMAC attrs: 0x1
[ 0.934446] Magic number: 5:460:276
[ 0.934514] usb usb1-port4: hash matches
[ 0.934598] tty tty13: hash matches
[ 0.934713] rtc_cmos 00:01: setting system clock to 2017-02-08 11:17:00 UTC (1486552620)
[ 0.935045] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.935100] EDD information not available.
[ 0.935232] PM: Hibernation image not present or could not be loaded.
[ 0.936920] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[ 0.936992] Write protecting the kernel read-only data: 14336k
[ 0.937839] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
[ 0.938333] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.951167] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.951344] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.951439] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.951537] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.951865] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.951992] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.952316] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.952462] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.952607] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.952754] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.998815] pps_core: LinuxPPS API ver. 1 registered
[ 0.998875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.003446] scsi host0: pata_marvell
[ 1.003933] PTP clock support registered
[ 1.008880] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.009088] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.009146] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.009423] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.009844] scsi host1: pata_marvell
[ 1.009973] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
[ 1.010032] ata2: DUMMY
[ 1.088062] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.220029] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.248033] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1.316271] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:22:1d:46
[ 1.316346] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.316426] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
[ 1.316502] ahci 0000:00:1f.2: version 3.0
[ 1.316772] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.316847] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems
[ 1.317636] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.348112] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.356058] usb 8-2: new low-speed USB device number 2 using uhci_hcd
[ 1.357608] usb 3-1: New USB device found, idVendor=0fe9, idProduct=db78
[ 1.357667] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 1.357729] usb 3-1: Product: Bluebird
[ 1.357782] usb 3-1: Manufacturer: Dvico
[ 1.357840] usb 3-1: SerialNumber: 0000827b
[ 1.360905] scsi host2: ahci
[ 1.361074] scsi host3: ahci
[ 1.361237] scsi host4: ahci
[ 1.361399] scsi host5: ahci
[ 1.361557] scsi host6: ahci
[ 1.361720] scsi host7: ahci
[ 1.361837] ata3: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325100 irq 31
[ 1.361918] ata4: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325180 irq 31
[ 1.361990] ata5: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325200 irq 31
[ 1.362061] ata6: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325280 irq 31
[ 1.362133] ata7: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325300 irq 31
[ 1.362205] ata8: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325380 irq 31
[ 1.383969] usb 1-4: New USB device found, idVendor=0413, idProduct=6a05
[ 1.384038] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.384096] usb 1-4: Product: WinFast DTV Dongle Dual
[ 1.384151] usb 1-4: Manufacturer: Leadtek
[ 1.404031] usb 9-1: new low-speed USB device number 2 using uhci_hcd
[ 1.468036] usb 3-2: new high-speed USB device number 3 using ehci-pci
[ 1.529056] usb 5-1: New USB device found, idVendor=045e, idProduct=0040
[ 1.529115] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.529174] usb 5-1: Product: Microsoft Wheel Mouse Optical®
[ 1.531748] usb 5-1: Manufacturer: Microsoft
[ 1.533046] usb 8-2: New USB device found, idVendor=413c, idProduct=2107
[ 1.533105] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.533164] usb 8-2: Product: Dell USB Entry Keyboard
[ 1.533219] usb 8-2: Manufacturer: Dell
[ 1.537885] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.563458] usb 9-1: New USB device found, idVendor=15c2, idProduct=ffdc
[ 1.563519] usb 9-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.570281] usbcore: registered new interface driver usbhid
[ 1.570337] usbhid: USB HID core driver
[ 1.572404] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1a.1/usb5/5-1/5-1:1.0/0003:045E:0040.0001/input/input5
[ 1.572931] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1a.1-1/input0
[ 1.573272] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.1/usb8/8-2/8-2:1.0/0003:413C:2107.0002/input/input6
[ 1.588124] firewire_core 0000:07:03.0: created device fw0: GUID 0090270001fd63fb, S400
[ 1.605512] usb 3-2: New USB device found, idVendor=0fe9, idProduct=db78
[ 1.605573] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 1.605634] usb 3-2: Product: Bluebird
[ 1.605687] usb 3-2: Manufacturer: Dvico
[ 1.605746] usb 3-2: SerialNumber: 0000027b
[ 1.628134] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.1-2/input0
[ 1.684037] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.684110] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.828030] tsc: Refined TSC clocksource calibration: 2333.067 MHz
[ 1.828089] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21a13a55cc1, max_idle_ns: 440795221981 ns
[ 1.852037] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.852105] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.852180] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.852638] ata7.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133
[ 1.852701] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.852765] ata3.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133
[ 1.852827] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.853376] ata7.00: configured for UDMA/133
[ 1.853493] ata3.00: configured for UDMA/133
[ 1.853704] scsi 2:0:0:0: Direct-Access ATA WDC WD30EURS-73T 0A80 PQ: 0 ANSI: 5
[ 1.854053] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.854139] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.854168] ata8.00: supports DRM functions and may not be fully accessible
[ 1.854263] ata8.00: disabling queued TRIM support
[ 1.854266] ata8.00: ATA-9: Samsung SSD 850 PRO 128GB, EXM02B6Q, max UDMA/133
[ 1.854318] sd 2:0:0:0: [sda] Write Protect is off
[ 1.854320] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.854345] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.854462] ata8.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.854490] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.854962] ata8.00: supports DRM functions and may not be fully accessible
[ 1.855092] ata8.00: disabling queued TRIM support
[ 1.855150] ata8.00: configured for UDMA/133
[ 1.932451] sda: sda1
[ 1.932781] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.024049] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.025453] ata4.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66
[ 2.026867] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
[ 2.050399] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5
[ 2.082407] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.082482] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.082676] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.082751] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.083170] scsi 6:0:0:0: Direct-Access ATA WDC WD30EURS-73T 0A80 PQ: 0 ANSI: 5
[ 2.083476] sd 6:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.083555] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 2.083630] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.083674] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.083676] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.083701] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.083932] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.084236] sd 7:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.084384] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.084444] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.084473] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.084478] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 2.086955] sdc: sdc1 sdc2 < sdc5 >
[ 2.087350] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.166804] sdb: sdb1
[ 2.167118] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.828109] clocksource: Switched to clocksource tsc
[ 4.032041] floppy0: no floppy controllers found
[ 5.156977] md: linear personality registered for level -1
[ 5.160050] md: multipath personality registered for level -4
[ 5.163092] md: raid0 personality registered for level 0
[ 5.166515] md: raid1 personality registered for level 1
[ 5.236006] raid6: sse2x1 gen() 4320 MB/s
[ 5.304004] raid6: sse2x1 xor() 3975 MB/s
[ 5.372009] raid6: sse2x2 gen() 5862 MB/s
[ 5.440008] raid6: sse2x2 xor() 4826 MB/s
[ 5.508007] raid6: sse2x4 gen() 6987 MB/s
[ 5.576008] raid6: sse2x4 xor() 5372 MB/s
[ 5.576060] raid6: using algorithm sse2x4 gen() 6987 MB/s
[ 5.576113] raid6: .... xor() 5372 MB/s, rmw enabled
[ 5.576167] raid6: using ssse3x2 recovery algorithm
[ 5.577674] xor: measuring software checksum speed
[ 5.616006] prefetch64-sse: 9305.000 MB/sec
[ 5.656003] generic_sse: 8227.000 MB/sec
[ 5.656055] xor: using function: prefetch64-sse (9305.000 MB/sec)
[ 5.657523] async_tx: api initialized (async)
[ 5.666360] md: raid6 personality registered for level 6
[ 5.666420] md: raid5 personality registered for level 5
[ 5.666474] md: raid4 personality registered for level 4
[ 5.673137] md: raid10 personality registered for level 10
[ 5.846585] Btrfs loaded
[ 5.947890] random: nonblocking pool is initialized
[ 6.064998] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.177029] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.177260] systemd[1]: Detected architecture x86-64.
[ 6.179340] systemd[1]: Set hostname to <testbox>.
[ 6.281949] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.282340] systemd[1]: Reached target User and Group Name Lookups.
[ 6.282671] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.283044] systemd[1]: Listening on Journal Audit Socket.
[ 6.283384] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.283726] systemd[1]: Listening on udev Kernel Socket.
[ 6.284409] systemd[1]: Created slice User and Session Slice.
[ 6.284745] systemd[1]: Listening on udev Control Socket.
[ 6.285170] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.285813] systemd[1]: Created slice System Slice.
[ 6.286453] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.286789] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.287133] systemd[1]: Listening on Journal Socket.
[ 6.300155] systemd[1]: Starting Load Kernel Modules...
[ 6.301253] systemd[1]: Starting Set console keymap...
[ 6.302348] systemd[1]: Mounting NFSD configuration filesystem...
[ 6.304107] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.305513] systemd[1]: Starting Nameserver information manager...
[ 6.306925] systemd[1]: Mounting Debug File System...
[ 6.313108] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.315703] Loading iSCSI transport class v2.0-870.
[ 6.317206] systemd[1]: Mounting RPC Pipe File System...
[ 6.317560] systemd[1]: Reached target Slices.
[ 6.317960] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.319488] systemd[1]: Listening on Syslog Socket.
[ 6.320766] systemd[1]: Mounting Huge Pages File System...
[ 6.321102] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.322243] systemd[1]: Starting Uncomplicated firewall...
[ 6.322549] systemd[1]: Reached target Encrypted Volumes.
[ 6.323301] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.325517] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.326850] systemd[1]: Starting Journal Service...
[ 6.327867] systemd[1]: PNFS blkmaping enablement. is not active.
[ 6.328229] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[ 6.328564] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[ 6.330653] systemd[1]: Mounted Debug File System.
[ 6.331015] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.331917] systemd[1]: Mounted Huge Pages File System.
[ 6.332897] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.344210] RPC: Registered named UNIX socket transport module.
[ 6.344273] RPC: Registered udp transport module.
[ 6.344337] RPC: Registered tcp transport module.
[ 6.344391] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.346120] systemd[1]: Started Uncomplicated firewall.
[ 6.354783] systemd[1]: Mounted RPC Pipe File System.
[ 6.361957] systemd[1]: Started Nameserver information manager.
[ 6.367275] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.372359] systemd[1]: Mounted NFSD configuration filesystem.
[ 6.378535] iscsi: registered transport (tcp)
[ 6.436193] systemd[1]: Started LVM2 metadata daemon.
[ 6.437628] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.460735] systemd[1]: Started Create Static Device Nodes in /dev.
[ 6.462081] systemd[1]: Starting udev Kernel Device Manager...
[ 6.469916] iscsi: registered transport (iser)
[ 6.470886] systemd[1]: Started Load Kernel Modules.
[ 6.472306] systemd[1]: Starting Apply Kernel Variables...
[ 6.473512] systemd[1]: Mounting FUSE Control File System...
[ 6.478132] systemd[1]: Mounted FUSE Control File System.
[ 6.497904] systemd[1]: Started Apply Kernel Variables.
[ 6.499491] systemd[1]: Started Journal Service.
[ 6.556156] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 6.691471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.720660] rc_core: module verification failed: signature and/or required key missing - tainting kernel
[ 6.721241] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
47b037a0512d9f8675ec2693bed46c8ea6a884ab [media] v4l2-async: failing functions shouldn't have side effects
79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media] mantis_dvb: fix some error codes in mantis_dvb_init()
c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media] exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
[ 6.774610] [drm] Initialized drm 1.1.0 20060810
[ 6.801091] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1:1.0/input/input7
[ 6.820067] imon 9-1:1.0: 0xffdc iMON LCD, MCE IR
[ 6.820072] (id 0x9f)
[ 6.820129] rc rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1:1.0/rc/rc0
[ 6.820859] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\IGPO) (20150930/utaddress-254)
[ 6.820867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.848077] Registered IR keymap rc-imon-mce
[ 6.860114] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1:1.0/rc/rc0/input8
[ 6.860254] imon 9-1:1.0: iMON device (15c2:ffdc, intf0) on usb<9:2> initialized
[ 6.860288] usbcore: registered new interface driver imon
[ 6.870218] nvidia: module license 'NVIDIA' taints kernel.
[ 6.870222] Disabling lock debugging due to kernel taint
[ 6.892342] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.892690] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 6.892701] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.101 Thu Dec 1 15:52:31 PST 2016
[ 6.958119] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.958145] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.975563] snd_hda_codec_realtek hdaudioC0D2: ALC888: SKU not ready 0x411111f0
[ 6.975933] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.975936] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.975939] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 6.975941] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 6.975943] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 6.975946] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x19
[ 6.975949] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x18
[ 6.975951] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 6.997611] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.997697] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.997771] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.997846] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.997922] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.065762] coretemp coretemp.0: Using relative temperature scale!
[ 7.065778] coretemp coretemp.0: Using relative temperature scale!
[ 7.507293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.514640] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.573964] ppdev: user-space parallel port driver
[ 7.610265] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 7.665985] nvidia_uvm: Loaded the UVM driver, major device number 243
[ 7.856698] media: Linux media interface: v0.10
[ 7.858907] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
47b037a0512d9f8675ec2693bed46c8ea6a884ab [media] v4l2-async: failing functions shouldn't have side effects
79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media] mantis_dvb: fix some error codes in mantis_dvb_init()
c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media] exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
[ 7.861968] dvb_usb_af9035 1-4:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 7.887476] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_generic_rw
[ 7.887477] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
[ 7.887499] dvb_usb_cxusb: disagrees about version of symbol rc_keydown
[ 7.887500] dvb_usb_cxusb: Unknown symbol rc_keydown (err -22)
[ 7.887507] dvb_usb_cxusb: disagrees about version of symbol dib0070_wbd_offset
[ 7.887508] dvb_usb_cxusb: Unknown symbol dib0070_wbd_offset (err -22)
[ 7.887513] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_device_init
[ 7.887514] dvb_usb_cxusb: Unknown symbol dvb_usb_device_init (err -22)
[ 7.887518] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_generic_write
[ 7.887519] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_write (err -22)
[ 7.900099] usb 1-4: dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in cold state
[ 7.900768] usb 1-4: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[ 8.124533] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 8.124616] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 8.124690] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 8.124763] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.144601] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_generic_rw
[ 8.144603] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
[ 8.144638] dvb_usb_cxusb: disagrees about version of symbol rc_keydown
[ 8.144639] dvb_usb_cxusb: Unknown symbol rc_keydown (err -22)
[ 8.144648] dvb_usb_cxusb: disagrees about version of symbol dib0070_wbd_offset
[ 8.144649] dvb_usb_cxusb: Unknown symbol dib0070_wbd_offset (err -22)
[ 8.144654] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_device_init
[ 8.144655] dvb_usb_cxusb: Unknown symbol dvb_usb_device_init (err -22)
[ 8.144659] dvb_usb_cxusb: disagrees about version of symbol dvb_usb_generic_write
[ 8.144660] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_write (err -22)
[ 8.288238] Adding 3903484k swap on /dev/mapper/testbox-swap0. Priority:-1 extents:1 across:3903484k SSFS
[ 8.607635] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.615882] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.617513] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.625554] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 8.632108] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.669901] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.673732] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.677859] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.817555] systemd-journald[427]: Received request to flush runtime journal from PID 1
[ 8.983418] audit: type=1400 audit(1486552628.541:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1272 comm="apparmor_parser"
[ 8.983429] audit: type=1400 audit(1486552628.541:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1272 comm="apparmor_parser"
[ 8.989025] audit: type=1400 audit(1486552628.549:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1274 comm="apparmor_parser"
[ 8.989037] audit: type=1400 audit(1486552628.549:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1274 comm="apparmor_parser"
[ 8.989045] audit: type=1400 audit(1486552628.549:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1274 comm="apparmor_parser"
[ 8.989051] audit: type=1400 audit(1486552628.549:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1274 comm="apparmor_parser"
[ 8.991017] audit: type=1400 audit(1486552628.549:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1275 comm="apparmor_parser"
[ 8.994850] audit: type=1400 audit(1486552628.553:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1273 comm="apparmor_parser"
[ 8.994862] audit: type=1400 audit(1486552628.553:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1273 comm="apparmor_parser"
[ 8.994869] audit: type=1400 audit(1486552628.553:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1273 comm="apparmor_parser"
[ 9.458670] cgroup: new mount options do not match the existing superblock, will be ignored
[ 9.548218] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9.776041] floppy0: no floppy controllers found
[ 9.894722] dvb_usb_af9035 1-4:1.0: firmware version=3.40.1.0
[ 9.894731] usb 1-4: dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in warm state
[ 9.894736] dvb_usb_af9035 1-4:1.0: [0] overriding tuner from 38 to 60
[ 9.894739] dvb_usb_af9035 1-4:1.0: [1] overriding tuner from 38 to 60
[ 9.895348] usb 1-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 9.895379] dvbdev: DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
[ 9.895383] usb 1-4: media controller created
[ 9.895737] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 9.903348] af9033 4-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 9.903353] af9033 4-001c: Afatech AF9033 successfully attached
[ 9.903363] usb 1-4: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 9.903370] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 9.905805] it913x it9133bx-tuner.2.auto: ITE IT913X BX successfully attached
[ 9.906083] usb 1-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 9.906113] dvbdev: DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
[ 9.906117] usb 1-4: media controller created
[ 9.906457] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 9.922097] af9033 4-001d: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 9.922102] af9033 4-001d: Afatech AF9033 successfully attached
[ 9.922112] usb 1-4: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[ 9.922118] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 9.923448] it913x it9133bx-tuner.3.auto: ITE IT913X BX successfully attached
[ 9.935639] rc rc1: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1
[ 9.935642] Registered IR keymap rc-empty
[ 9.935709] input: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input18
[ 9.935769] usb 1-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 9.935774] usb 1-4: dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual' successfully initialized and connected
[ 9.935809] usbcore: registered new interface driver dvb_usb_af9035
[ 11.396871] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.396980] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 11.397011] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 13.538466] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.538630] NFSD: starting 90-second grace period (net ffffffff81ef56c0)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults)
2017-02-08 11:30 [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults) Vincent McIntyre
@ 2017-02-08 13:37 ` Sean Young
2017-02-13 20:53 ` Vincent McIntyre
2017-02-15 15:14 ` Sean Young
1 sibling, 1 reply; 5+ messages in thread
From: Sean Young @ 2017-02-08 13:37 UTC (permalink / raw)
To: Vincent McIntyre; +Cc: linux-media
Hi Vincent,
On Wed, Feb 08, 2017 at 10:30:30PM +1100, Vincent McIntyre wrote:
> Hi
>
> I have been working with Sean on figuring out the protocol used by a
> dvico remote.
> I thought the patch he sent was at fault but I backed it out and tried again.
>
> I've attached a full dmesg but the core of it is when dvb_usb_cxusb
> tries to load:
>
> [ 7.858907] WARNING: You are using an experimental version of the
> media stack.
> As the driver is backported to an older kernel, it doesn't offer
> enough quality for its usage in production.
> Use it with care.
> Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> 47b037a0512d9f8675ec2693bed46c8ea6a884ab [media]
> v4l2-async: failing functions shouldn't have side effects
> 79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media]
> mantis_dvb: fix some error codes in mantis_dvb_init()
> c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media]
> exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
> [ 7.861968] dvb_usb_af9035 1-4:1.0: prechip_version=83
> chip_version=02 chip_type=9135
> [ 7.887476] dvb_usb_cxusb: disagrees about version of symbol
> dvb_usb_generic_rw
> [ 7.887477] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
-snip-
This is a problem with media_build. I'm not familiar with media_build, I
did try it out last night (for the first time) and got the same issue on
Ubuntu 16.04. I haven't been able to figure out what the problem is yet.
I'll have a look again tonight or tomorrow night. In the mean time, if
anyone else knows then that would be great. :)
Sean
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults)
2017-02-08 13:37 ` Sean Young
@ 2017-02-13 20:53 ` Vincent McIntyre
0 siblings, 0 replies; 5+ messages in thread
From: Vincent McIntyre @ 2017-02-13 20:53 UTC (permalink / raw)
To: linux-media
ping?
My media_build tree is updated as far as:
$ git log -1
commit 0721d4bde661c71cd4e41de37afb24b0694c65a3
Author: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon Nov 21 13:17:19 2016 +0100
Only use Makefile.mm if frame_vector.c is present.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> On Wed, Feb 08, 2017 at 10:30:30PM +1100, Vincent McIntyre wrote:
>> Hi
>>
>> I have been working with Sean on figuring out the protocol used by a
>> dvico remote.
>> I thought the patch he sent was at fault but I backed it out and tried
>> again.
>>
>> I've attached a full dmesg but the core of it is when dvb_usb_cxusb
>> tries to load:
>>
>> [ 7.858907] WARNING: You are using an experimental version of the
>> media stack.
>> As the driver is backported to an older kernel, it doesn't
>> offer
>> enough quality for its usage in production.
>> Use it with care.
>> Latest git patches (needed if you report a bug to
>> linux-media@vger.kernel.org):
>> 47b037a0512d9f8675ec2693bed46c8ea6a884ab [media]
>> v4l2-async: failing functions shouldn't have side effects
>> 79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media]
>> mantis_dvb: fix some error codes in mantis_dvb_init()
>> c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media]
>> exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
>> [ 7.861968] dvb_usb_af9035 1-4:1.0: prechip_version=83
>> chip_version=02 chip_type=9135
>> [ 7.887476] dvb_usb_cxusb: disagrees about version of symbol
>> dvb_usb_generic_rw
>> [ 7.887477] dvb_usb_cxusb: Unknown symbol dvb_usb_generic_rw (err -22)
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults)
2017-02-08 11:30 [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults) Vincent McIntyre
2017-02-08 13:37 ` Sean Young
@ 2017-02-15 15:14 ` Sean Young
[not found] ` <CAEsFdVNXCO4n8tMVpKsYme1K1qH1Nm0zAwCFJgS8sfuCiTHbhw@mail.gmail.com>
1 sibling, 1 reply; 5+ messages in thread
From: Sean Young @ 2017-02-15 15:14 UTC (permalink / raw)
To: Vincent McIntyre; +Cc: linux-media
On Wed, Feb 08, 2017 at 10:30:30PM +1100, Vincent McIntyre wrote:
> Hi
>
> I have been working with Sean on figuring out the protocol used by a
> dvico remote.
> I thought the patch he sent was at fault but I backed it out and tried again.
>
> I've attached a full dmesg but the core of it is when dvb_usb_cxusb
> tries to load:
>
> [ 7.858907] WARNING: You are using an experimental version of the
> media stack.
> As the driver is backported to an older kernel, it doesn't offer
> enough quality for its usage in production.
> Use it with care.
> Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> 47b037a0512d9f8675ec2693bed46c8ea6a884ab [media]
> v4l2-async: failing functions shouldn't have side effects
> 79a2eda80c6dab79790c308d9f50ecd2e5021ba3 [media]
> mantis_dvb: fix some error codes in mantis_dvb_init()
> c2987aaf0c9c2bcb0d4c5902d61473d9aa018a3d [media]
> exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT
> [ 7.861968] dvb_usb_af9035 1-4:1.0: prechip_version=83
> chip_version=02 chip_type=9135
> [ 7.887476] dvb_usb_cxusb: disagrees about version of symbol
Sorry about not getting back to you sooner, life got in the way. The
problem here is that the dvb-usb-cxusb did not get selected, so it
was not recompiled.
The problem is that DVB_USB_CXUSB Kconfig has this line:
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
The make_kconfig.pl script transforms this into a dependency, but
DVB_SI2168 is only available when compiling against kernel 4.7 or later.
I think only one select line needs to match, so I created this patch.
Please apply this patch against media_build, you might need to do make
clean before building again.
Thanks,
Sean
From: Sean Young <sean@mess.org>
Date: Wed, 15 Feb 2017 14:58:00 +0000
Subject: [PATCH] only one select Kconfig needs to match
---
v4l/scripts/make_kconfig.pl | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/v4l/scripts/make_kconfig.pl b/v4l/scripts/make_kconfig.pl
index ba8c134..a11f820 100755
--- a/v4l/scripts/make_kconfig.pl
+++ b/v4l/scripts/make_kconfig.pl
@@ -169,6 +169,7 @@ sub depends($$)
push @{$depends{$key}}, $deps;
}
+my %selectdepends = ();
sub selects($$$)
{
my $key = shift;
@@ -181,7 +182,7 @@ sub selects($$$)
# Transform "select X if Y" into "depends on !Y || X"
$select = "!($if) || ($select)";
}
- push @{$depends{$key}}, $select;
+ push @{$selectdepends{$key}}, $select;
}
# Needs:
@@ -228,6 +229,23 @@ sub checkdeps()
return 0;
}
}
+ my $selectdeps = $selectdepends{$key};
+ if ($selectdeps) {
+ my $found = 0;
+ foreach (@$selectdeps) {
+ next if($_ eq '');
+ if (eval(toperl($_))) {
+ $found = 1;
+ last;
+ }
+ }
+ if ($found == 0) {
+ print "Disabling $key, select dependency '$_' not met\n" if $debug;
+ $allconfig{$key} = 0;
+ return 0;
+ }
+ }
+
return 1;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Fwd: [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults)
[not found] ` <CAEsFdVNXCO4n8tMVpKsYme1K1qH1Nm0zAwCFJgS8sfuCiTHbhw@mail.gmail.com>
@ 2017-02-16 13:09 ` Vincent McIntyre
0 siblings, 0 replies; 5+ messages in thread
From: Vincent McIntyre @ 2017-02-16 13:09 UTC (permalink / raw)
To: linux-media
Hi list
I missed you in the cc: field...
---------- Forwarded message ----------
From: Vincent McIntyre <vincent.mcintyre@gmail.com>
Date: Thu, 16 Feb 2017 23:51:05 +1100
Subject: Re: [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite
loops, segfaults)
To: Sean Young <sean@mess.org>
On 2/16/17, Sean Young <sean@mess.org> wrote:
>
> The problem is that DVB_USB_CXUSB Kconfig has this line:
> select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
> The make_kconfig.pl script transforms this into a dependency, but
> DVB_SI2168 is only available when compiling against kernel 4.7 or later.
> I think only one select line needs to match, so I created this patch.
>
> Please apply this patch against media_build, you might need to do make
> clean before building again.
Awsome - build is working again, thank you. See the other thread for
my progress report.
> Thanks,
>
> Sean
>
>
> From: Sean Young <sean@mess.org>
> Date: Wed, 15 Feb 2017 14:58:00 +0000
> Subject: [PATCH] only one select Kconfig needs to match
Tested-by: vincent.mcintyre@gmail.com
> ---
> v4l/scripts/make_kconfig.pl | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/v4l/scripts/make_kconfig.pl b/v4l/scripts/make_kconfig.pl
> index ba8c134..a11f820 100755
> --- a/v4l/scripts/make_kconfig.pl
> +++ b/v4l/scripts/make_kconfig.pl
> @@ -169,6 +169,7 @@ sub depends($$)
> push @{$depends{$key}}, $deps;
> }
>
> +my %selectdepends = ();
> sub selects($$$)
> {
> my $key = shift;
> @@ -181,7 +182,7 @@ sub selects($$$)
> # Transform "select X if Y" into "depends on !Y || X"
> $select = "!($if) || ($select)";
> }
> - push @{$depends{$key}}, $select;
> + push @{$selectdepends{$key}}, $select;
> }
>
> # Needs:
> @@ -228,6 +229,23 @@ sub checkdeps()
> return 0;
> }
> }
> + my $selectdeps = $selectdepends{$key};
> + if ($selectdeps) {
> + my $found = 0;
> + foreach (@$selectdeps) {
> + next if($_ eq '');
> + if (eval(toperl($_))) {
> + $found = 1;
> + last;
> + }
> + }
> + if ($found == 0) {
> + print "Disabling $key, select dependency '$_' not met\n" if $debug;
> + $allconfig{$key} = 0;
> + return 0;
> + }
> + }
> +
> return 1;
> }
>
> --
> 2.7.4
Vince
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-02-16 13:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-08 11:30 [regression] dvb_usb_cxusb (was Re: ir-keytable: infinite loops, segfaults) Vincent McIntyre
2017-02-08 13:37 ` Sean Young
2017-02-13 20:53 ` Vincent McIntyre
2017-02-15 15:14 ` Sean Young
[not found] ` <CAEsFdVNXCO4n8tMVpKsYme1K1qH1Nm0zAwCFJgS8sfuCiTHbhw@mail.gmail.com>
2017-02-16 13:09 ` Fwd: " Vincent McIntyre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.