* 1.1.2 Full Pass consolidated Test Report
@ 2012-07-13 20:52 Serban, Laurentiu
2012-07-16 22:10 ` McClintock Matthew-B29882
0 siblings, 1 reply; 7+ messages in thread
From: Serban, Laurentiu @ 2012-07-13 20:52 UTC (permalink / raw)
To: yocto
[-- Attachment #1.1: Type: text/plain, Size: 4996 bytes --]
Hello,
Here are the results for the full pass testing on 1.1.2 release.
Issues:
Crownbay image was copied to the wrong folder which we didn’t find and had no response from anybody, so all cases on crownbay are blocked. LTP on sugarbay is still running.
FRI2 sato image was not created so FRI2 tests were blocked.
Summary:
There were 5 open bugs, three of them were for core build system , they are lib64 sato image build failed due to non-existent tasks, core-image-sato ipk build failed due to dependency of lib32-ofono and mklibs-native failed to compile fedora17 64bit. one issue for ADT, qemu launch failed due to not finding GLIBC_2.14, reported as bug 2748 and another is Ioatdma error found in dmesg log on Jasperforest. All these 5 bugs are also in Yocto 1.2 test cycle. For build performance, one qemux86 sato build on a Core i7 machine takes 115 minutes.
For non-intel platforms there is a new bug found for build image with PAM support, reported as bug 2743. This issue has been fixed in master branch but the patches aren't merged into edison.
Commit information
--------------------------------
Tree/Branch: poky/edison
Poky Commit: 8886aee5b9741c05886994967d9ecf420331c600
Critical bugs, more than 50% test cases are blocked
Only Normal, Minor or Enhancement bugs, or less than 10% test cases failed
Normal, Major and Critical bugs, and more than 10% test cases failed
Test Result Summary
Component
Target
Status
Comments
BSP
Beagleboard
GOOD
Everything runs well
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
GOOD
Everything runs well
eMenlow
GOOD
Vnc server issue (2700)
Blacksand
GOOD
syslog is not started by default in background on bsps
Crownbay-emgd
BLOCK
No image
Sugarbay
GOOD
Everything runs well
FRI2-sato-sdk
BLOCK
No image
HuronRiver-sato-sdk
GOOD
Everything runs well
Jasperforest-lsb
GOOD
Bug 2742 - system dmesg log check issue
QEMU
qemuarm
GOOD
Everything runs well
qemuppc
GOOD
Everything runs well
qemumips
GOOD
Everything runs well
qemux86
BUGGY
Zypper issue (2694)
qemux86-64
BUGGY
Zypper issue (2694)
Core build system
BUGGY
Build image with PAM support failed.
Multilib issues (2744, 2747), mklibs compile failure (2746)
HOB
GOOD
Everything runs well
Compliance
GOOD
LTP result: https://wiki.pokylinux.org/wiki/LTP_result
POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
Stress
GOOD
Everything runs well
Distribution Support
GOOD
beecrypt-native failed to compile on Fedora17(final) 64bit
ADT
BUGGY
2748 (qemu launch failure)
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Beagleboard Sato-SDK
40
0
40
0
0
Routerstationpro Sato-SDK
33
0
33
0
0
Mpc8315e-rdb Sato-SDK
36
0
36
0
0
eMenlow Sato-SDK
67
0
66
1(bug 2700)
0
n450 Sato-SDK
71
0
70
1 (bug 2646)
0
Crownbay-Sato-SDK
67
0
0
0
67
FRI2 Sato-SDK
86
0
0
0
86 (bug 2527)
HuronRiver Sato-SDK
61
0
61
0
0
Sugarbay Sato-SDK
68
0
68
0
0
Jasperforest lsb-SDK
32
0
31
1 (2742)
0
Qemuarm Sato
30
0
30
0
0
Qemuarm Sato-SDK
35
0
35
0
0
Qemumips Sato
30
0
30
0
0
Qemumips Sato-SDK
35
0
35
0
0
Qemuppc Sato
30
0
30
0
0
Qemuppc Sato-SDK
35
0
35
0
0
Qemux86-64 Sato
37
0
31
5 (bug 2694)
1 (2694)
Qemux86-64 Sato-SDK
37
0
31
5 (bug 2694)
1 (2694)
Qemux86 Sato
37
0
31
5 (bug 2694)
1 (2694)
Qemux86 Sato-SDK
37
0
31
5 (bug 2694)
1 (2694)
Core build system
20
0
17
3 (2746, 2744, 2747)
0
HOB
26
0
26
0
0
ADT
6
0
5
1 (2748)
0
Total
956
839
27
90
Component
Bug Number
Target Milestone
System & Core OS
System Usage
Bug 2694 [QEMU-X86_64]zypper refresh fail
Bug 2700 cannot reconnect to x11vnc
Bug 2742 ioatdma error happened on jasperforest platform with edison branch
Bug 2646 Windows switching failure
Core build system
Bug 2747 core-image-sato ipk build failed due to dependency of lib32-bluez4/lib32-bluez4/lib32-bluez4
Bug 2746 mklibs-native failed to compile fedora17-X86_64
Bug 2744 lib64 sato image build failed due to nonexistant task
Bug 2743 Useradd command fails after 10 retries with 1.1.2 20120630 build
ADT
Bug 2748 qemu cannot be started
Laurentiu Serban
QA Engineer
Open Source Technology Center
System Software Division Romania
Desk: +40 31 8604742
iNET: 88451042
[-- Attachment #1.2: Type: text/html, Size: 98681 bytes --]
[-- Attachment #2: Yocto 1.1.2 detailed_testreport_Full_Pass.xlsx --]
[-- Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet, Size: 68760 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-13 20:52 1.1.2 Full Pass consolidated Test Report Serban, Laurentiu
@ 2012-07-16 22:10 ` McClintock Matthew-B29882
2012-07-17 5:31 ` McClintock Matthew-B29882
0 siblings, 1 reply; 7+ messages in thread
From: McClintock Matthew-B29882 @ 2012-07-16 22:10 UTC (permalink / raw)
To: Serban, Laurentiu; +Cc: yocto
Comment on 1.1.2 - I'm seeing the following issue on a CentOS 5.8 box
- do you do any QA tests on such a distribution?
| DEBUG: Staging files from
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
to /home/mattsm/git/poky/build-edison-old/tmp/pkgdata/ppc603e-poky-linux
| DEBUG: Staging files from
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
to /home/mattsm/git/poky/build-edison-old/tmp/pkgdata/ppc603e-poky-linux
| DEBUG: Staging files from
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/shlibs
to /home/mattsm/git/poky/build-edison-old/tmp/sysroots/mpc8315e-rdb/shlibs
| DEBUG: Preparing tree
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
for packaging at
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/pkgdata
| DEBUG: Preparing tree
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/shlibs
for packaging at
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/shlibs
| /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/run.sstate_create_package.16637:
line 83: 7735 Segmentation fault rm -rf
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/
| ERROR: Function 'sstate_create_package' failed (see
/home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/log.do_package.16637
for further information)
NOTE: package eglibc-locale-2.13-r16: task do_package: Failed
ERROR: Task 9 (/home/mattsm/git/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
do_package) failed with exit code '1'
ERROR: '/home/mattsm/git/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb'
failed
On Fri, Jul 13, 2012 at 3:52 PM, Serban, Laurentiu
<laurentiu.serban@intel.com> wrote:
>
> Hello,
>
> Here are the results for the full pass testing on 1.1.2 release.
>
>
>
> Issues:
>
> Crownbay image was copied to the wrong folder which we didn’t find and had no response from anybody, so all cases on crownbay are blocked. LTP on sugarbay is still running.
>
> FRI2 sato image was not created so FRI2 tests were blocked.
>
>
>
> Summary:
>
> There were 5 open bugs, three of them were for core build system , they are lib64 sato image build failed due to non-existent tasks, core-image-sato ipk build failed due to dependency of lib32-ofono and mklibs-native failed to compile fedora17 64bit. one issue for ADT, qemu launch failed due to not finding GLIBC_2.14, reported as bug 2748 and another is Ioatdma error found in dmesg log on Jasperforest. All these 5 bugs are also in Yocto 1.2 test cycle. For build performance, one qemux86 sato build on a Core i7 machine takes 115 minutes.
>
> For non-intel platforms there is a new bug found for build image with PAM support, reported as bug 2743. This issue has been fixed in master branch but the patches aren't merged into edison.
>
>
>
> Commit information
>
> --------------------------------
>
> Tree/Branch: poky/edison
>
> Poky Commit: 8886aee5b9741c05886994967d9ecf420331c600
>
>
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
> Only Normal, Minor or Enhancement bugs, or less than 10% test cases failed
>
>
>
> Normal, Major and Critical bugs, and more than 10% test cases failed
>
>
>
>
>
> Test Result Summary
>
> Component
>
> Target
>
> Status
>
> Comments
>
> BSP
>
> Beagleboard
>
> GOOD
>
> Everything runs well
>
> Routerstationpro
>
> GOOD
>
> Everything runs well
>
> Mpc8315e-rdb
>
> GOOD
>
> Everything runs well
>
> eMenlow
>
> GOOD
>
> Vnc server issue (2700)
>
> Blacksand
>
> GOOD
>
> syslog is not started by default in background on bsps
>
> Crownbay-emgd
>
> BLOCK
>
> No image
>
> Sugarbay
>
> GOOD
>
> Everything runs well
>
> FRI2-sato-sdk
>
> BLOCK
>
> No image
>
> HuronRiver-sato-sdk
>
> GOOD
>
> Everything runs well
>
> Jasperforest-lsb
>
> GOOD
>
> Bug 2742 – system dmesg log check issue
>
> QEMU
>
> qemuarm
>
> GOOD
>
> Everything runs well
>
> qemuppc
>
> GOOD
>
> Everything runs well
>
> qemumips
>
> GOOD
>
> Everything runs well
>
> qemux86
>
> BUGGY
>
> Zypper issue (2694)
>
> qemux86-64
>
> BUGGY
>
> Zypper issue (2694)
>
> Core build system
>
>
>
> BUGGY
>
> Build image with PAM support failed.
>
> Multilib issues (2744, 2747), mklibs compile failure (2746)
>
> HOB
>
>
>
> GOOD
>
> Everything runs well
>
> Compliance
>
> GOOD
>
> LTP result: https://wiki.pokylinux.org/wiki/LTP_result
> POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
>
> Stress
>
> GOOD
>
> Everything runs well
>
> Distribution Support
>
> GOOD
>
> beecrypt-native failed to compile on Fedora17(final) 64bit
>
> ADT
>
>
>
> BUGGY
>
> 2748 (qemu launch failure)
>
>
>
>
>
> Detailed Test Result for each component
>
> Target
>
> Total TCs
>
> Not Run
>
> Passed
>
> Failed
>
> Not testable (Blocked)
>
> Beagleboard Sato-SDK
>
> 40
>
> 0
>
> 40
>
> 0
>
> 0
>
> Routerstationpro Sato-SDK
>
> 33
>
> 0
>
> 33
>
> 0
>
> 0
>
> Mpc8315e-rdb Sato-SDK
>
> 36
>
> 0
>
> 36
>
> 0
>
> 0
>
> eMenlow Sato-SDK
>
> 67
>
> 0
>
> 66
>
> 1(bug 2700)
>
> 0
>
> n450 Sato-SDK
>
> 71
>
> 0
>
> 70
>
> 1 (bug 2646)
>
> 0
>
> Crownbay-Sato-SDK
>
> 67
>
> 0
>
> 0
>
> 0
>
> 67
>
> FRI2 Sato-SDK
>
> 86
>
> 0
>
> 0
>
> 0
>
> 86 (bug 2527)
>
> HuronRiver Sato-SDK
>
> 61
>
> 0
>
> 61
>
> 0
>
> 0
>
> Sugarbay Sato-SDK
>
> 68
>
> 0
>
> 68
>
> 0
>
> 0
>
> Jasperforest lsb-SDK
>
> 32
>
> 0
>
> 31
>
> 1 (2742)
>
> 0
>
> Qemuarm Sato
>
> 30
>
> 0
>
> 30
>
> 0
>
> 0
>
> Qemuarm Sato-SDK
>
> 35
>
> 0
>
> 35
>
> 0
>
> 0
>
> Qemumips Sato
>
> 30
>
> 0
>
> 30
>
> 0
>
> 0
>
> Qemumips Sato-SDK
>
> 35
>
> 0
>
> 35
>
> 0
>
> 0
>
> Qemuppc Sato
>
> 30
>
> 0
>
> 30
>
> 0
>
> 0
>
> Qemuppc Sato-SDK
>
> 35
>
> 0
>
> 35
>
> 0
>
> 0
>
> Qemux86-64 Sato
>
> 37
>
> 0
>
> 31
>
> 5 (bug 2694)
>
> 1 (2694)
>
> Qemux86-64 Sato-SDK
>
> 37
>
> 0
>
> 31
>
> 5 (bug 2694)
>
> 1 (2694)
>
> Qemux86 Sato
>
> 37
>
> 0
>
> 31
>
> 5 (bug 2694)
>
> 1 (2694)
>
> Qemux86 Sato-SDK
>
> 37
>
> 0
>
> 31
>
> 5 (bug 2694)
>
> 1 (2694)
>
> Core build system
>
> 20
>
> 0
>
> 17
>
> 3 (2746, 2744, 2747)
>
> 0
>
> HOB
>
> 26
>
> 0
>
> 26
>
> 0
>
> 0
>
> ADT
>
> 6
>
> 0
>
> 5
>
> 1 (2748)
>
> 0
>
> Total
>
> 956
>
>
>
> 839
>
> 27
>
> 90
>
>
>
>
>
> Component
>
> Bug Number
>
> Target Milestone
>
> System & Core OS
>
> System Usage
>
> Bug 2694 [QEMU-X86_64]zypper refresh fail
>
> Bug 2700 cannot reconnect to x11vnc
>
> Bug 2742 ioatdma error happened on jasperforest platform with edison branch
>
> Bug 2646 Windows switching failure
>
> Core build system
>
> Bug 2747 core-image-sato ipk build failed due to dependency of lib32-bluez4/lib32-bluez4/lib32-bluez4
>
> Bug 2746 mklibs-native failed to compile fedora17-X86_64
>
> Bug 2744 lib64 sato image build failed due to nonexistant task
>
> Bug 2743 Useradd command fails after 10 retries with 1.1.2 20120630 build
>
> ADT
>
> Bug 2748 qemu cannot be started
>
>
>
>
>
> Laurentiu Serban
>
> QA Engineer
>
> Open Source Technology Center
>
> System Software Division Romania
>
> Desk: +40 31 8604742
>
> iNET: 88451042
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-16 22:10 ` McClintock Matthew-B29882
@ 2012-07-17 5:31 ` McClintock Matthew-B29882
2012-07-17 5:51 ` Khem Raj
0 siblings, 1 reply; 7+ messages in thread
From: McClintock Matthew-B29882 @ 2012-07-17 5:31 UTC (permalink / raw)
To: Serban, Laurentiu; +Cc: yocto
On Mon, Jul 16, 2012 at 5:10 PM, Matthew McClintock <msm@freescale.com> wrote:
> Comment on 1.1.2 - I'm seeing the following issue on a CentOS 5.8 box
> - do you do any QA tests on such a distribution?
>
> | DEBUG: Staging files from
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
> to /home/mattsm/git/poky/build-edison-old/tmp/pkgdata/ppc603e-poky-linux
> | DEBUG: Staging files from
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
> to /home/mattsm/git/poky/build-edison-old/tmp/pkgdata/ppc603e-poky-linux
> | DEBUG: Staging files from
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/shlibs
> to /home/mattsm/git/poky/build-edison-old/tmp/sysroots/mpc8315e-rdb/shlibs
> | DEBUG: Preparing tree
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/pkgdata
> for packaging at
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/pkgdata
> | DEBUG: Preparing tree
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/shlibs
> for packaging at
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/shlibs
> | /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/run.sstate_create_package.16637:
> line 83: 7735 Segmentation fault rm -rf
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/sstate-build-package/
> | ERROR: Function 'sstate_create_package' failed (see
> /home/mattsm/git/poky/build-edison-old/tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/log.do_package.16637
> for further information)
> NOTE: package eglibc-locale-2.13-r16: task do_package: Failed
> ERROR: Task 9 (/home/mattsm/git/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
> do_package) failed with exit code '1'
> ERROR: '/home/mattsm/git/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb'
> failed
Some more follow up... the following seems to "hide" my issue. Does
anyone have any ideas?
diff --git a/meta/classes/sstate.bbclass b/meta/classes/sstate.bbclass
index d2a45c3..9a739d1 100644
--- a/meta/classes/sstate.bbclass
+++ b/meta/classes/sstate.bbclass
@@ -463,7 +463,7 @@ sstate_create_package () {
mv $TFILE ${SSTATE_PKG}
cd ${WORKDIR}
- rm -rf ${SSTATE_BUILDDIR}
+ strace rm -rf ${SSTATE_BUILDDIR}
}
#
-M
>
> On Fri, Jul 13, 2012 at 3:52 PM, Serban, Laurentiu
> <laurentiu.serban@intel.com> wrote:
>>
>> Hello,
>>
>> Here are the results for the full pass testing on 1.1.2 release.
>>
>>
>>
>> Issues:
>>
>> Crownbay image was copied to the wrong folder which we didn’t find and had no response from anybody, so all cases on crownbay are blocked. LTP on sugarbay is still running.
>>
>> FRI2 sato image was not created so FRI2 tests were blocked.
>>
>>
>>
>> Summary:
>>
>> There were 5 open bugs, three of them were for core build system , they are lib64 sato image build failed due to non-existent tasks, core-image-sato ipk build failed due to dependency of lib32-ofono and mklibs-native failed to compile fedora17 64bit. one issue for ADT, qemu launch failed due to not finding GLIBC_2.14, reported as bug 2748 and another is Ioatdma error found in dmesg log on Jasperforest. All these 5 bugs are also in Yocto 1.2 test cycle. For build performance, one qemux86 sato build on a Core i7 machine takes 115 minutes.
>>
>> For non-intel platforms there is a new bug found for build image with PAM support, reported as bug 2743. This issue has been fixed in master branch but the patches aren't merged into edison.
>>
>>
>>
>> Commit information
>>
>> --------------------------------
>>
>> Tree/Branch: poky/edison
>>
>> Poky Commit: 8886aee5b9741c05886994967d9ecf420331c600
>>
>>
>>
>>
>>
>>
>>
>> Critical bugs, more than 50% test cases are blocked
>>
>>
>>
>> Only Normal, Minor or Enhancement bugs, or less than 10% test cases failed
>>
>>
>>
>> Normal, Major and Critical bugs, and more than 10% test cases failed
>>
>>
>>
>>
>>
>> Test Result Summary
>>
>> Component
>>
>> Target
>>
>> Status
>>
>> Comments
>>
>> BSP
>>
>> Beagleboard
>>
>> GOOD
>>
>> Everything runs well
>>
>> Routerstationpro
>>
>> GOOD
>>
>> Everything runs well
>>
>> Mpc8315e-rdb
>>
>> GOOD
>>
>> Everything runs well
>>
>> eMenlow
>>
>> GOOD
>>
>> Vnc server issue (2700)
>>
>> Blacksand
>>
>> GOOD
>>
>> syslog is not started by default in background on bsps
>>
>> Crownbay-emgd
>>
>> BLOCK
>>
>> No image
>>
>> Sugarbay
>>
>> GOOD
>>
>> Everything runs well
>>
>> FRI2-sato-sdk
>>
>> BLOCK
>>
>> No image
>>
>> HuronRiver-sato-sdk
>>
>> GOOD
>>
>> Everything runs well
>>
>> Jasperforest-lsb
>>
>> GOOD
>>
>> Bug 2742 – system dmesg log check issue
>>
>> QEMU
>>
>> qemuarm
>>
>> GOOD
>>
>> Everything runs well
>>
>> qemuppc
>>
>> GOOD
>>
>> Everything runs well
>>
>> qemumips
>>
>> GOOD
>>
>> Everything runs well
>>
>> qemux86
>>
>> BUGGY
>>
>> Zypper issue (2694)
>>
>> qemux86-64
>>
>> BUGGY
>>
>> Zypper issue (2694)
>>
>> Core build system
>>
>>
>>
>> BUGGY
>>
>> Build image with PAM support failed.
>>
>> Multilib issues (2744, 2747), mklibs compile failure (2746)
>>
>> HOB
>>
>>
>>
>> GOOD
>>
>> Everything runs well
>>
>> Compliance
>>
>> GOOD
>>
>> LTP result: https://wiki.pokylinux.org/wiki/LTP_result
>> POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
>>
>> Stress
>>
>> GOOD
>>
>> Everything runs well
>>
>> Distribution Support
>>
>> GOOD
>>
>> beecrypt-native failed to compile on Fedora17(final) 64bit
>>
>> ADT
>>
>>
>>
>> BUGGY
>>
>> 2748 (qemu launch failure)
>>
>>
>>
>>
>>
>> Detailed Test Result for each component
>>
>> Target
>>
>> Total TCs
>>
>> Not Run
>>
>> Passed
>>
>> Failed
>>
>> Not testable (Blocked)
>>
>> Beagleboard Sato-SDK
>>
>> 40
>>
>> 0
>>
>> 40
>>
>> 0
>>
>> 0
>>
>> Routerstationpro Sato-SDK
>>
>> 33
>>
>> 0
>>
>> 33
>>
>> 0
>>
>> 0
>>
>> Mpc8315e-rdb Sato-SDK
>>
>> 36
>>
>> 0
>>
>> 36
>>
>> 0
>>
>> 0
>>
>> eMenlow Sato-SDK
>>
>> 67
>>
>> 0
>>
>> 66
>>
>> 1(bug 2700)
>>
>> 0
>>
>> n450 Sato-SDK
>>
>> 71
>>
>> 0
>>
>> 70
>>
>> 1 (bug 2646)
>>
>> 0
>>
>> Crownbay-Sato-SDK
>>
>> 67
>>
>> 0
>>
>> 0
>>
>> 0
>>
>> 67
>>
>> FRI2 Sato-SDK
>>
>> 86
>>
>> 0
>>
>> 0
>>
>> 0
>>
>> 86 (bug 2527)
>>
>> HuronRiver Sato-SDK
>>
>> 61
>>
>> 0
>>
>> 61
>>
>> 0
>>
>> 0
>>
>> Sugarbay Sato-SDK
>>
>> 68
>>
>> 0
>>
>> 68
>>
>> 0
>>
>> 0
>>
>> Jasperforest lsb-SDK
>>
>> 32
>>
>> 0
>>
>> 31
>>
>> 1 (2742)
>>
>> 0
>>
>> Qemuarm Sato
>>
>> 30
>>
>> 0
>>
>> 30
>>
>> 0
>>
>> 0
>>
>> Qemuarm Sato-SDK
>>
>> 35
>>
>> 0
>>
>> 35
>>
>> 0
>>
>> 0
>>
>> Qemumips Sato
>>
>> 30
>>
>> 0
>>
>> 30
>>
>> 0
>>
>> 0
>>
>> Qemumips Sato-SDK
>>
>> 35
>>
>> 0
>>
>> 35
>>
>> 0
>>
>> 0
>>
>> Qemuppc Sato
>>
>> 30
>>
>> 0
>>
>> 30
>>
>> 0
>>
>> 0
>>
>> Qemuppc Sato-SDK
>>
>> 35
>>
>> 0
>>
>> 35
>>
>> 0
>>
>> 0
>>
>> Qemux86-64 Sato
>>
>> 37
>>
>> 0
>>
>> 31
>>
>> 5 (bug 2694)
>>
>> 1 (2694)
>>
>> Qemux86-64 Sato-SDK
>>
>> 37
>>
>> 0
>>
>> 31
>>
>> 5 (bug 2694)
>>
>> 1 (2694)
>>
>> Qemux86 Sato
>>
>> 37
>>
>> 0
>>
>> 31
>>
>> 5 (bug 2694)
>>
>> 1 (2694)
>>
>> Qemux86 Sato-SDK
>>
>> 37
>>
>> 0
>>
>> 31
>>
>> 5 (bug 2694)
>>
>> 1 (2694)
>>
>> Core build system
>>
>> 20
>>
>> 0
>>
>> 17
>>
>> 3 (2746, 2744, 2747)
>>
>> 0
>>
>> HOB
>>
>> 26
>>
>> 0
>>
>> 26
>>
>> 0
>>
>> 0
>>
>> ADT
>>
>> 6
>>
>> 0
>>
>> 5
>>
>> 1 (2748)
>>
>> 0
>>
>> Total
>>
>> 956
>>
>>
>>
>> 839
>>
>> 27
>>
>> 90
>>
>>
>>
>>
>>
>> Component
>>
>> Bug Number
>>
>> Target Milestone
>>
>> System & Core OS
>>
>> System Usage
>>
>> Bug 2694 [QEMU-X86_64]zypper refresh fail
>>
>> Bug 2700 cannot reconnect to x11vnc
>>
>> Bug 2742 ioatdma error happened on jasperforest platform with edison branch
>>
>> Bug 2646 Windows switching failure
>>
>> Core build system
>>
>> Bug 2747 core-image-sato ipk build failed due to dependency of lib32-bluez4/lib32-bluez4/lib32-bluez4
>>
>> Bug 2746 mklibs-native failed to compile fedora17-X86_64
>>
>> Bug 2744 lib64 sato image build failed due to nonexistant task
>>
>> Bug 2743 Useradd command fails after 10 retries with 1.1.2 20120630 build
>>
>> ADT
>>
>> Bug 2748 qemu cannot be started
>>
>>
>>
>>
>>
>> Laurentiu Serban
>>
>> QA Engineer
>>
>> Open Source Technology Center
>>
>> System Software Division Romania
>>
>> Desk: +40 31 8604742
>>
>> iNET: 88451042
>>
>>
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-17 5:31 ` McClintock Matthew-B29882
@ 2012-07-17 5:51 ` Khem Raj
2012-07-17 14:57 ` McClintock Matthew-B29882
0 siblings, 1 reply; 7+ messages in thread
From: Khem Raj @ 2012-07-17 5:51 UTC (permalink / raw)
To: McClintock Matthew-B29882; +Cc: yocto
On Mon, Jul 16, 2012 at 10:31 PM, McClintock Matthew-B29882
<B29882@freescale.com> wrote:
> }
> - rm -rf ${SSTATE_BUILDDIR}
> + strace rm -rf ${SSTATE_BUILDDIR}
strace is probably eating the return value
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-17 5:51 ` Khem Raj
@ 2012-07-17 14:57 ` McClintock Matthew-B29882
2012-07-17 17:35 ` McClintock Matthew-B29882
0 siblings, 1 reply; 7+ messages in thread
From: McClintock Matthew-B29882 @ 2012-07-17 14:57 UTC (permalink / raw)
To: Khem Raj; +Cc: McClintock Matthew-B29882, yocto
On Tue, Jul 17, 2012 at 12:51 AM, Khem Raj <raj.khem@gmail.com> wrote:
> On Mon, Jul 16, 2012 at 10:31 PM, McClintock Matthew-B29882
> <B29882@freescale.com> wrote:
>> }
>> - rm -rf ${SSTATE_BUILDDIR}
>> + strace rm -rf ${SSTATE_BUILDDIR}
>
> strace is probably eating the return value
And you would be right....
I want to point out running the
./tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/run.sstate_create_package.17463
generated script directly does not fail (without the strace
modification)
-M
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-17 14:57 ` McClintock Matthew-B29882
@ 2012-07-17 17:35 ` McClintock Matthew-B29882
2012-07-18 18:51 ` McClintock Matthew-B29882
0 siblings, 1 reply; 7+ messages in thread
From: McClintock Matthew-B29882 @ 2012-07-17 17:35 UTC (permalink / raw)
To: Khem Raj; +Cc: McClintock Matthew-B29882, yocto
On Tue, Jul 17, 2012 at 9:57 AM, Matthew McClintock <msm@freescale.com> wrote:
> On Tue, Jul 17, 2012 at 12:51 AM, Khem Raj <raj.khem@gmail.com> wrote:
>> On Mon, Jul 16, 2012 at 10:31 PM, McClintock Matthew-B29882
>> <B29882@freescale.com> wrote:
>>> }
>>> - rm -rf ${SSTATE_BUILDDIR}
>>> + strace rm -rf ${SSTATE_BUILDDIR}
>>
>> strace is probably eating the return value
>
> And you would be right....
>
> I want to point out running the
> ./tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/run.sstate_create_package.17463
> generated script directly does not fail (without the strace
> modification)
Also, the follow does work:
diff --git a/meta/classes/sstate.bbclass b/meta/classes/sstate.bbclass
index d2a45c3..92a1e4d 100644
--- a/meta/classes/sstate.bbclass
+++ b/meta/classes/sstate.bbclass
@@ -463,7 +463,14 @@ sstate_create_package () {
mv $TFILE ${SSTATE_PKG}
cd ${WORKDIR}
- rm -rf ${SSTATE_BUILDDIR}
+ for i in `find ${SSTATE_BUILDDIR} -type f`; do
+ bbnote "deleting $i"
+ rm -rf $i
+ done
+ for i in `find ${SSTATE_BUILDDIR} -type d -depth`; do
+ bbnote "rmdir $i"
+ rmdir $i
+ done
}
Still debugging....
-M
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: 1.1.2 Full Pass consolidated Test Report
2012-07-17 17:35 ` McClintock Matthew-B29882
@ 2012-07-18 18:51 ` McClintock Matthew-B29882
0 siblings, 0 replies; 7+ messages in thread
From: McClintock Matthew-B29882 @ 2012-07-18 18:51 UTC (permalink / raw)
To: Khem Raj; +Cc: McClintock Matthew-B29882, yocto
Ok, so I've found downgrading coreutils package to the last working
version (from CentOS 5.6) makes this issue go away:
$ wget http://vault.centos.org/5.6/os/x86_64/CentOS/coreutils-5.97-23.el5_4.2.x86_64.rpm
$ sudo rpm -Uvh --oldpackage coreutils-5.97-23.el5_4.2.x86_64.rpm
I've looked at the changelog of coreutils package for centos and
nothing stands out as causing the issue. The most likely candiate is:
https://bugzilla.redhat.com/show_bug.cgi?id=523923
$ rpm -q --changelog coreutils
* Wed Mar 14 2012 Ondrej Vasik <ovasik@redhat.com> 5.97-34.1
- fix backup of the individual files (broken by backupdir
patch - #803356)
* Wed May 11 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-34
- su: fix shell suspend in tcsh (#681598)
* Fri Apr 29 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-33
- workaround wrong workarounds for the runcon argument
reordering (related #628953)
* Tue Apr 19 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-32
- fix descriptor leak in fts tight cycle fix (#537463)
* Thu Apr 14 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-31
- improve error chmod handling in ro xattrs fix (#525199)
* Thu Mar 31 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-30
- improve the fix for preserving xattrs in read only mode
(#525199)
* Fri Mar 25 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-28
- fix incorrect output of ls -1U with more than one
argument(#515499)
- runuser documentation improved (#524805)
- cp/mv: preserving xattrs should work on read only
files too (#525199)
- fix failure of rmdir --ignore-fail-on-non-empty on vxfs
filesystem (#664895)
- mv: fix confusing 'subdirectory of itself' error message
(#658839)
- don't reorder runcon arguments (#628953)
- clarify mkdir --mode behaviour in info documentation
(#610559)
- improve escaping in colorls scriptlets(#586957)
- add info documentation for chcon and runcon(#660186)
- document that groups are not reflecting changes within
existing login session (#584802)
- pwd: add support for -P (physical) and -L (logical) (#582774)
- cp/mv: do not inform about ACL preserving failure, when
preserving not explicitely requested (#513153)
- du using ghosted automounted directory no longer
results in 'No such file or directory' (#537463)
- fix segfault in sort if LC_TIME differs from the rest
of locales(#684249)
- speed up deleting many files (#523923)
- allow mv backups for directories (#627285)
* Wed Jan 26 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-27
- fix exit status of terminated child processes in su with
pam(#559098)
* Mon Jan 10 2011 Ondrej Vasik <ovasik@redhat.com> 5.97-26
- add support for iflag=fullblock in dd (#668247)
- fix the build with gettext-0.17
* Mon Feb 22 2010 Ondrej Vasik <ovasik@redhat.com> 5.97-25
- readlink cannot handle recursive symlinks(#510809)
* Mon Oct 12 2009 Ondrej Vasik <ovasik@redhat.com> 5.97-24
- fixed regression where df -l <device> as regular user
cause "Permission denied" (#520630, introduced by fix for
rhbz #497830)
On Tue, Jul 17, 2012 at 12:35 PM, Matthew McClintock <msm@freescale.com> wrote:
> On Tue, Jul 17, 2012 at 9:57 AM, Matthew McClintock <msm@freescale.com> wrote:
>> On Tue, Jul 17, 2012 at 12:51 AM, Khem Raj <raj.khem@gmail.com> wrote:
>>> On Mon, Jul 16, 2012 at 10:31 PM, McClintock Matthew-B29882
>>> <B29882@freescale.com> wrote:
>>>> }
>>>> - rm -rf ${SSTATE_BUILDDIR}
>>>> + strace rm -rf ${SSTATE_BUILDDIR}
>>>
>>> strace is probably eating the return value
>>
>> And you would be right....
>>
>> I want to point out running the
>> ./tmp/work/ppc603e-poky-linux/eglibc-locale-2.13-r16/temp/run.sstate_create_package.17463
>> generated script directly does not fail (without the strace
>> modification)
>
> Also, the follow does work:
>
> diff --git a/meta/classes/sstate.bbclass b/meta/classes/sstate.bbclass
> index d2a45c3..92a1e4d 100644
> --- a/meta/classes/sstate.bbclass
> +++ b/meta/classes/sstate.bbclass
> @@ -463,7 +463,14 @@ sstate_create_package () {
> mv $TFILE ${SSTATE_PKG}
>
> cd ${WORKDIR}
> - rm -rf ${SSTATE_BUILDDIR}
> + for i in `find ${SSTATE_BUILDDIR} -type f`; do
> + bbnote "deleting $i"
> + rm -rf $i
> + done
> + for i in `find ${SSTATE_BUILDDIR} -type d -depth`; do
> + bbnote "rmdir $i"
> + rmdir $i
> + done
> }
>
> Still debugging....
>
> -M
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-07-18 18:51 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-13 20:52 1.1.2 Full Pass consolidated Test Report Serban, Laurentiu
2012-07-16 22:10 ` McClintock Matthew-B29882
2012-07-17 5:31 ` McClintock Matthew-B29882
2012-07-17 5:51 ` Khem Raj
2012-07-17 14:57 ` McClintock Matthew-B29882
2012-07-17 17:35 ` McClintock Matthew-B29882
2012-07-18 18:51 ` McClintock Matthew-B29882
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.