* [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 @ 2020-07-08 7:43 Maeva Manuel 2020-07-08 12:14 ` Gary Bisson 2020-07-09 14:44 ` [Buildroot] [PATCH v2 " Maeva Manuel 0 siblings, 2 replies; 7+ messages in thread From: Maeva Manuel @ 2020-07-08 7:43 UTC (permalink / raw) To: buildroot This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision. Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)] Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> --- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/freescale-imx/imx-seco/imx-seco.hash b/package/freescale-imx/imx-seco/imx-seco.hash index 56f56369d4..930801e839 100644 --- a/package/freescale-imx/imx-seco/imx-seco.hash +++ b/package/freescale-imx/imx-seco/imx-seco.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING diff --git a/package/freescale-imx/imx-seco/imx-seco.mk b/package/freescale-imx/imx-seco/imx-seco.mk index d06bf4c5cc..be3f3c4419 100644 --- a/package/freescale-imx/imx-seco/imx-seco.mk +++ b/package/freescale-imx/imx-seco/imx-seco.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin @@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in post-image script. ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qm-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qmb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef endif -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-08 7:43 [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 Maeva Manuel @ 2020-07-08 12:14 ` Gary Bisson 2020-07-09 6:54 ` Maeva Manuel 2020-07-09 14:44 ` [Buildroot] [PATCH v2 " Maeva Manuel 1 sibling, 1 reply; 7+ messages in thread From: Gary Bisson @ 2020-07-08 12:14 UTC (permalink / raw) To: buildroot Hi Maeva, Thank you for your contribution, please see my comments below. On Wed, Jul 08, 2020 at 09:43:52AM +0200, Maeva Manuel wrote: > This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. > Firmware file names now include the SoC revision. > > Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) > and on i.MX8QM MEK (SoC rev B0)] > Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > --- > package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- > package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/package/freescale-imx/imx-seco/imx-seco.hash b/package/freescale-imx/imx-seco/imx-seco.hash > index 56f56369d4..930801e839 100644 > --- a/package/freescale-imx/imx-seco/imx-seco.hash > +++ b/package/freescale-imx/imx-seco/imx-seco.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin > -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA > -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING > +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin > +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA > +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING Usually when EULA/COPYING is updated it means there are new terms, can you drop a line on this in your commit log? > diff --git a/package/freescale-imx/imx-seco/imx-seco.mk b/package/freescale-imx/imx-seco/imx-seco.mk > index d06bf4c5cc..be3f3c4419 100644 > --- a/package/freescale-imx/imx-seco/imx-seco.mk > +++ b/package/freescale-imx/imx-seco/imx-seco.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -IMX_SECO_VERSION = 2.3.1 > +IMX_SECO_VERSION = 3.6.3 > IMX_SECO_SITE = $(FREESCALE_IMX_SITE) > IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin > > @@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES > # is done in post-image script. > ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) > define IMX_SECO_INSTALL_IMAGES_CMDS > - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ > + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ > $(BINARIES_DIR)/ahab-container.img What about C0 firmware? Are C0 CPU already available? If so, maybe there should be a way to select which version we want to use. Or another approach would be to copy them all without renaming and have the final script pick the right one depending on some configuration. Let me know your thoughts. Regards, Gary ^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-08 12:14 ` Gary Bisson @ 2020-07-09 6:54 ` Maeva Manuel 2020-07-09 7:30 ` Heiko Thiery 2020-07-09 7:44 ` Gary Bisson 0 siblings, 2 replies; 7+ messages in thread From: Maeva Manuel @ 2020-07-09 6:54 UTC (permalink / raw) To: buildroot Hello Gary, License was updated from: LA_OPT_NXP_Software_License v10 December 2019 to: LA_OPT_NXP_Software_License v11 February 2020 which explain the change of EULA/COPYING license files. This LA_OPT_NXP_Software_License is used by a wide range proprietary binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, VPU firmwares, ...). It is periodically updated with the introduction of new products. It's recommended to review it in detail with, if a system uses it in production. Regarding the C0 revision of i.MX8QXP: 1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK boards. 2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) adds support for this chip. 3) In order not to break the compatibility with the BR imx-seco 2.3.1 package, it remains with B0 support. 4) I think it's not a good idea that it's the final script that chooses the right file, because the names often change. This could mean that the script would have to be updated every time the package is updated too. By being in the recipe it collects all the changes in the recipe. 5) C0 support should introduce a Kconfig, and this will be done in a future patch. Regards, Maeva -----Original Message----- From: Gary Bisson <gary.bisson@boundarydevices.com> Sent: Wednesday, July 8, 2020 2:15 PM To: Maeva Manuel (OSS) <maeva.manuel@oss.nxp.com> Cc: buildroot at buildroot.org; Gary Bisson <bisson.gary@gmail.com>; Refik Tuzakli <tuzakli.refik@gmail.com> Subject: Re: [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 Hi Maeva, Thank you for your contribution, please see my comments below. On Wed, Jul 08, 2020 at 09:43:52AM +0200, Maeva Manuel wrote: > This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. > Firmware file names now include the SoC revision. > > Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on > i.MX8QM MEK (SoC rev B0)] > Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > --- > package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- > package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/package/freescale-imx/imx-seco/imx-seco.hash > b/package/freescale-imx/imx-seco/imx-seco.hash > index 56f56369d4..930801e839 100644 > --- a/package/freescale-imx/imx-seco/imx-seco.hash > +++ b/package/freescale-imx/imx-seco/imx-seco.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 > b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 > imx-seco-2.3.1.bin > -sha256 > 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA > -sha256 > 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 > COPYING > +sha256 > +52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd > +imx-seco-3.6.3.bin > +sha256 > +7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 > +EULA > +sha256 > +2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d > +COPYING Usually when EULA/COPYING is updated it means there are new terms, can you drop a line on this in your commit log? > diff --git a/package/freescale-imx/imx-seco/imx-seco.mk > b/package/freescale-imx/imx-seco/imx-seco.mk > index d06bf4c5cc..be3f3c4419 100644 > --- a/package/freescale-imx/imx-seco/imx-seco.mk > +++ b/package/freescale-imx/imx-seco/imx-seco.mk > @@ -4,7 +4,7 @@ > # > > ###################################################################### > ########## > > -IMX_SECO_VERSION = 2.3.1 > +IMX_SECO_VERSION = 3.6.3 > IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = > imx-seco-$(IMX_SECO_VERSION).bin > > @@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in > post-image script. > ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) > define IMX_SECO_INSTALL_IMAGES_CMDS > - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ > + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ > $(BINARIES_DIR)/ahab-container.img What about C0 firmware? Are C0 CPU already available? If so, maybe there should be a way to select which version we want to use. Or another approach would be to copy them all without renaming and have the final script pick the right one depending on some configuration. Let me know your thoughts. Regards, Gary ^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-09 6:54 ` Maeva Manuel @ 2020-07-09 7:30 ` Heiko Thiery 2020-07-09 7:44 ` Gary Bisson 1 sibling, 0 replies; 7+ messages in thread From: Heiko Thiery @ 2020-07-09 7:30 UTC (permalink / raw) To: buildroot Hi, Maeva Manuel (OSS) <maeva.manuel@oss.nxp.com> schrieb am Do., 9. Juli 2020, 08:54: > Hello Gary, > > License was updated from: > LA_OPT_NXP_Software_License v10 December 2019 > to: > LA_OPT_NXP_Software_License v11 February 2020 > which explain the change of EULA/COPYING license files. > > This LA_OPT_NXP_Software_License is used by a wide range proprietary > binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, > VPU firmwares, ...). It is periodically updated with the introduction > of new products. It's recommended to review it in detail with, if a > system uses it in production. > > Regarding the C0 revision of i.MX8QXP: > > 1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK > boards. > 2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) > adds support for this chip. > 3) In order not to break the compatibility with the BR imx-seco 2.3.1 > package, it remains with B0 support. > 4) I think it's not a good idea that it's the final script that chooses > the right file, because the names often change. This could mean that the > script would have to be updated every time the package is updated too. By > being in the recipe it collects all the changes in the recipe. > What about other boards that rely on e.g. the C0 Firmware. Shouln't we export all variants and create a link to the one used for the EVK board? 5) C0 support should introduce a Kconfig, and this will be done in a future > patch. > > Regards, > > Maeva > > -----Original Message----- > From: Gary Bisson <gary.bisson@boundarydevices.com> > Sent: Wednesday, July 8, 2020 2:15 PM > To: Maeva Manuel (OSS) <maeva.manuel@oss.nxp.com> > Cc: buildroot at buildroot.org; Gary Bisson <bisson.gary@gmail.com>; Refik > Tuzakli <tuzakli.refik@gmail.com> > Subject: Re: [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump > version to 3.6.3 > > Hi Maeva, > > Thank you for your contribution, please see my comments below. > > On Wed, Jul 08, 2020 at 09:43:52AM +0200, Maeva Manuel wrote: > > This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. > > Firmware file names now include the SoC revision. > > > > Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > > [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on > > i.MX8QM MEK (SoC rev B0)] > > Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > > --- > > package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- > > package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- > > 2 files changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/package/freescale-imx/imx-seco/imx-seco.hash > > b/package/freescale-imx/imx-seco/imx-seco.hash > > index 56f56369d4..930801e839 100644 > > --- a/package/freescale-imx/imx-seco/imx-seco.hash > > +++ b/package/freescale-imx/imx-seco/imx-seco.hash > > @@ -1,4 +1,4 @@ > > # Locally calculated > > -sha256 > > b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 > > imx-seco-2.3.1.bin > > -sha256 > > 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA > > -sha256 > > 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 > > COPYING > > +sha256 > > +52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd > > +imx-seco-3.6.3.bin > > +sha256 > > +7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 > > +EULA > > +sha256 > > +2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d > > +COPYING > > Usually when EULA/COPYING is updated it means there are new terms, can you > drop a line on this in your commit log? > > > diff --git a/package/freescale-imx/imx-seco/imx-seco.mk > > b/package/freescale-imx/imx-seco/imx-seco.mk > > index d06bf4c5cc..be3f3c4419 100644 > > --- a/package/freescale-imx/imx-seco/imx-seco.mk > > +++ b/package/freescale-imx/imx-seco/imx-seco.mk > > @@ -4,7 +4,7 @@ > > # > > > > ###################################################################### > > ########## > > > > -IMX_SECO_VERSION = 2.3.1 > > +IMX_SECO_VERSION = 3.6.3 > > IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = > > imx-seco-$(IMX_SECO_VERSION).bin > > > > @@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in > > post-image script. > > ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) > > define IMX_SECO_INSTALL_IMAGES_CMDS > > - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ > > + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ > > $(BINARIES_DIR)/ahab-container.img > > What about C0 firmware? Are C0 CPU already available? If so, maybe there > should be a way to select which version we want to use. > Or another approach would be to copy them all without renaming and have > the final script pick the right one depending on some configuration. > > Let me know your thoughts. > > Regards, > Gary > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200709/747d7473/attachment.html> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-09 6:54 ` Maeva Manuel 2020-07-09 7:30 ` Heiko Thiery @ 2020-07-09 7:44 ` Gary Bisson 1 sibling, 0 replies; 7+ messages in thread From: Gary Bisson @ 2020-07-09 7:44 UTC (permalink / raw) To: buildroot Hi Maeva, On Thu, Jul 09, 2020 at 06:54:12AM +0000, Maeva Manuel (OSS) wrote: > Hello Gary, > > License was updated from: > LA_OPT_NXP_Software_License v10 December 2019 > to: > LA_OPT_NXP_Software_License v11 February 2020 > which explain the change of EULA/COPYING license files. > > This LA_OPT_NXP_Software_License is used by a wide range proprietary > binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, > VPU firmwares, ...). It is periodically updated with the introduction > of new products. It's recommended to review it in detail with, if a > system uses it in production. Yes that's fine, a simple line to explain the EULA was updated to its Feb. 2020 version is sufficient, but it should be there. > Regarding the C0 revision of i.MX8QXP: > > 1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK boards. > 2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) adds support for this chip. > 3) In order not to break the compatibility with the BR imx-seco 2.3.1 package, it remains with B0 support. > 4) I think it's not a good idea that it's the final script that chooses the right file, because the names often change. This could mean that the script would have to be updated every time the package is updated too. By being in the recipe it collects all the changes in the recipe. > 5) C0 support should introduce a Kconfig, and this will be done in a future patch. Fair enough, but same it then should be in the commit log so that people using C0 firmware know it is coming. Regards, Gary ^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH v2 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-08 7:43 [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 Maeva Manuel 2020-07-08 12:14 ` Gary Bisson @ 2020-07-09 14:44 ` Maeva Manuel 2020-07-09 15:12 ` Gary Bisson 1 sibling, 1 reply; 7+ messages in thread From: Maeva Manuel @ 2020-07-09 14:44 UTC (permalink / raw) To: buildroot This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision. In order not to break the compatibility with the imx-seco 2.3.1 package, it remains B0 support for i.MX8QXP MEK. C0 support should introduce a Kconfig and this will be done in a future patch. License was updated from: LA_OPT_NXP_Software_License v10 December 2019 to: LA_OPT_NXP_Software_License v11 February 2020 which explains the change of EULA/COPYING license files. Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)] Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> --- Changes v1 -> v2: Suggested by Gary: - Add a commit log comment about license change - Add a commit log comment about the rev C0 support of i.MX8QXP MEK --- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/freescale-imx/imx-seco/imx-seco.hash b/package/freescale-imx/imx-seco/imx-seco.hash index 56f56369d4..930801e839 100644 --- a/package/freescale-imx/imx-seco/imx-seco.hash +++ b/package/freescale-imx/imx-seco/imx-seco.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING diff --git a/package/freescale-imx/imx-seco/imx-seco.mk b/package/freescale-imx/imx-seco/imx-seco.mk index d06bf4c5cc..be3f3c4419 100644 --- a/package/freescale-imx/imx-seco/imx-seco.mk +++ b/package/freescale-imx/imx-seco/imx-seco.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin @@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in post-image script. ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qm-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qmb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef endif -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH v2 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 2020-07-09 14:44 ` [Buildroot] [PATCH v2 " Maeva Manuel @ 2020-07-09 15:12 ` Gary Bisson 0 siblings, 0 replies; 7+ messages in thread From: Gary Bisson @ 2020-07-09 15:12 UTC (permalink / raw) To: buildroot Hi Maeva, On Thu, Jul 09, 2020 at 04:44:57PM +0200, Maeva Manuel wrote: > This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. > Firmware file names now include the SoC revision. > > In order not to break the compatibility with the imx-seco 2.3.1 package, > it remains B0 support for i.MX8QXP MEK. > C0 support should introduce a Kconfig and this will be done in a future > patch. > > License was updated from: > LA_OPT_NXP_Software_License v10 December 2019 > to: > LA_OPT_NXP_Software_License v11 February 2020 > which explains the change of EULA/COPYING license files. > > Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com> > [Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) > and on i.MX8QM MEK (SoC rev B0)] > Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com> Thanks for spinning the v2 quickly and for the contribution. Regards, Gary ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-07-09 15:12 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-08 7:43 [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3 Maeva Manuel 2020-07-08 12:14 ` Gary Bisson 2020-07-09 6:54 ` Maeva Manuel 2020-07-09 7:30 ` Heiko Thiery 2020-07-09 7:44 ` Gary Bisson 2020-07-09 14:44 ` [Buildroot] [PATCH v2 " Maeva Manuel 2020-07-09 15:12 ` Gary Bisson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.