[PATCH v2 0/3] Add basic support for Allwinner A83T SOC

[PATCH v2 0/3] Add basic support for Allwinner A83T SOC

[Vishnu Patekar]

This patch series adds very basic support for Allwinner A83T SOC.
Clock, peripherals, smp support will be added later.

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Note: A83T pincontroller patch is already applied by Linus, so not added in this
patch.

changes from v1->v2:
1. used UART0 header with PB9, PB10 pins.
2. removed unnecessary includes and comments from dtsi.
3. arranged nodes in alphabatical order.
4. arrnaged compatible in alphabatical order.
5. changed cpu nodes to use cpu@100 -cpu@-103.
6. changed dts filename.

Vishnu Patekar (3):
  ARM: sunxi: Introduce Allwinner for A83T support
  ARM: dts: sun8i: Add Allwinner A83T dtsi
  ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

 Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  |  64 ++++++
 arch/arm/boot/dts/sun8i-a83t.dtsi                  | 247 +++++++++++++++++++++
 arch/arm/mach-sunxi/sunxi.c                        |   1 +
 drivers/clk/sunxi/clk-sunxi.c                      |   6 +
 5 files changed, 319 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

-- 
1.9.1

[PATCH v2 0/3] Add basic support for Allwinner A83T SOC

[Vishnu Patekar]

This patch series adds very basic support for Allwinner A83T SOC.
Clock, peripherals, smp support will be added later.

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Note: A83T pincontroller patch is already applied by Linus, so not added in this
patch.

changes from v1->v2:
1. used UART0 header with PB9, PB10 pins.
2. removed unnecessary includes and comments from dtsi.
3. arranged nodes in alphabatical order.
4. arrnaged compatible in alphabatical order.
5. changed cpu nodes to use cpu at 100 -cpu at -103.
6. changed dts filename.

Vishnu Patekar (3):
  ARM: sunxi: Introduce Allwinner for A83T support
  ARM: dts: sun8i: Add Allwinner A83T dtsi
  ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

 Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  |  64 ++++++
 arch/arm/boot/dts/sun8i-a83t.dtsi                  | 247 +++++++++++++++++++++
 arch/arm/mach-sunxi/sunxi.c                        |   1 +
 drivers/clk/sunxi/clk-sunxi.c                      |   6 +
 5 files changed, 319 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

-- 
1.9.1

[PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Vishnu Patekar]

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Signed-off-by: Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 arch/arm/mach-sunxi/sunxi.c                     | 1 +
 drivers/clk/sunxi/clk-sunxi.c                   | 6 ++++++
 3 files changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index bb9b0faa..7e79fcc 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -11,5 +11,6 @@ using one of the following compatible strings:
   allwinner,sun7i-a20
   allwinner,sun8i-a23
   allwinner,sun8i-a33
+  allwinner,sun8i-a83t
   allwinner,sun8i-h3
   allwinner,sun9i-a80
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 8583a9c..d64e92d 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -69,6 +69,7 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
+	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
 	NULL,
 };
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 9c79af0c..1632201 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1213,6 +1213,12 @@ CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
 
+static void __init sun8i_a83t_init_clocks(struct device_node *node)
+{
+	sunxi_init_clocks(NULL, 0);
+}
+CLK_OF_DECLARE(sun8i_a83t_clk_init, "allwinner,sun8i-a83t", sun8i_a83t_init_clocks);
+
 static void __init sun9i_init_clocks(struct device_node *node)
 {
 	sunxi_init_clocks(NULL, 0);
-- 
1.9.1

[PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Vishnu Patekar]

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 arch/arm/mach-sunxi/sunxi.c                     | 1 +
 drivers/clk/sunxi/clk-sunxi.c                   | 6 ++++++
 3 files changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index bb9b0faa..7e79fcc 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -11,5 +11,6 @@ using one of the following compatible strings:
   allwinner,sun7i-a20
   allwinner,sun8i-a23
   allwinner,sun8i-a33
+  allwinner,sun8i-a83t
   allwinner,sun8i-h3
   allwinner,sun9i-a80
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 8583a9c..d64e92d 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -69,6 +69,7 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
+	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
 	NULL,
 };
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 9c79af0c..1632201 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1213,6 +1213,12 @@ CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
 
+static void __init sun8i_a83t_init_clocks(struct device_node *node)
+{
+	sunxi_init_clocks(NULL, 0);
+}
+CLK_OF_DECLARE(sun8i_a83t_clk_init, "allwinner,sun8i-a83t", sun8i_a83t_init_clocks);
+
 static void __init sun9i_init_clocks(struct device_node *node)
 {
 	sunxi_init_clocks(NULL, 0);
-- 
1.9.1

[PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Vishnu Patekar]

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 arch/arm/mach-sunxi/sunxi.c                     | 1 +
 drivers/clk/sunxi/clk-sunxi.c                   | 6 ++++++
 3 files changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index bb9b0faa..7e79fcc 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -11,5 +11,6 @@ using one of the following compatible strings:
   allwinner,sun7i-a20
   allwinner,sun8i-a23
   allwinner,sun8i-a33
+  allwinner,sun8i-a83t
   allwinner,sun8i-h3
   allwinner,sun9i-a80
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 8583a9c..d64e92d 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -69,6 +69,7 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
+	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
 	NULL,
 };
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 9c79af0c..1632201 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1213,6 +1213,12 @@ CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
 CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
 
+static void __init sun8i_a83t_init_clocks(struct device_node *node)
+{
+	sunxi_init_clocks(NULL, 0);
+}
+CLK_OF_DECLARE(sun8i_a83t_clk_init, "allwinner,sun8i-a83t", sun8i_a83t_init_clocks);
+
 static void __init sun9i_init_clocks(struct device_node *node)
 {
 	sunxi_init_clocks(NULL, 0);
-- 
1.9.1

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Allwinner A83T is new octa-core cortex-a7 SOC.
This adds the basic dtsi, the clocks differs from
earlier sun8i SOCs.

Signed-off-by: Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 247 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 247 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 0000000..e85995f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+		cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <4>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <5>;
+		};
+		cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <6>;
+		};
+
+		cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <7>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&osc24M>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2",
+						 "PG3", "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC5", "PC6", "PC8",
+						 "PC9", "PC10", "PC11",
+						 "PC12", "PC13", "PC14",
+						 "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PB9", "PB10";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.9.1

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Allwinner A83T is new octa-core cortex-a7 SOC.
This adds the basic dtsi, the clocks differs from
earlier sun8i SOCs.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 247 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 247 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 0000000..e85995f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+		cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <4>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <5>;
+		};
+		cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <6>;
+		};
+
+		cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <7>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&osc24M>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2",
+						 "PG3", "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC5", "PC6", "PC8",
+						 "PC9", "PC10", "PC11",
+						 "PC12", "PC13", "PC14",
+						 "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PB9", "PB10";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.9.1

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Allwinner A83T is new octa-core cortex-a7 SOC.
This adds the basic dtsi, the clocks differs from
earlier sun8i SOCs.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 247 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 247 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 0000000..e85995f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu at 1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu at 2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu at 3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+		cpu at 100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <4>;
+		};
+
+		cpu at 101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <5>;
+		};
+		cpu at 102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <6>;
+		};
+
+		cpu at 103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <7>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc at 01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller at 01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pio: pinctrl at 01c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&osc24M>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0 at 0 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1 at 0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2 at 0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0 at 0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1 at 0 {
+				allwinner,pins = "PG0", "PG1", "PG2",
+						 "PG3", "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC5", "PC6", "PC8",
+						 "PC9", "PC10", "PC11",
+						 "PC12", "PC13", "PC14",
+						 "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0 at 0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0 at 1 {
+				allwinner,pins = "PB9", "PB10";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial at 01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.9.1

[PATCH v2 3/3] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

[Vishnu Patekar]

H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
It has UART, ethernet, USB, HDMI, etc ports on it.

A83T patches are tested on this board.
It has UART, ethernet, USB, HDMI, etc ports on it.

For FEL mode it needs USB A-A(Male) cable. I used uart0 which
is multiplexed to microsd pins PF2 and PF4.

Enabled UART0 Header(PB9, PB10 pins).

Signed-off-by: Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  | 64 ++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 0000000..342e1d3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
-- 
1.9.1

[PATCH v2 3/3] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

[Vishnu Patekar]

H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
It has UART, ethernet, USB, HDMI, etc ports on it.

A83T patches are tested on this board.
It has UART, ethernet, USB, HDMI, etc ports on it.

For FEL mode it needs USB A-A(Male) cable. I used uart0 which
is multiplexed to microsd pins PF2 and PF4.

Enabled UART0 Header(PB9, PB10 pins).

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  | 64 ++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 0000000..342e1d3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
-- 
1.9.1

[PATCH v2 3/3] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

[Vishnu Patekar]

H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
It has UART, ethernet, USB, HDMI, etc ports on it.

A83T patches are tested on this board.
It has UART, ethernet, USB, HDMI, etc ports on it.

For FEL mode it needs USB A-A(Male) cable. I used uart0 which
is multiplexed to microsd pins PF2 and PF4.

Enabled UART0 Header(PB9, PB10 pins).

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  | 64 ++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 0000000..342e1d3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
-- 
1.9.1

Re: [PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Chen-Yu Tsai]

On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
<vishnupatekar0510@gmail.com> wrote:
> Allwinner A83T is octa-core cortex-a7 based SoC.
> It's clock control unit and prcm, pinmux are different from previous sun8i
> series.
> Its processor cores are arragned in two clusters 4 cores each,
> similar to A80.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>

Could you also update Documentation/arm/sunxi/README, so it says A83T
is supported?

Otherwise,

Acked-by: Chen-Yu Tsai <wens@csie.org>

[PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Chen-Yu Tsai]

On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
<vishnupatekar0510@gmail.com> wrote:
> Allwinner A83T is octa-core cortex-a7 based SoC.
> It's clock control unit and prcm, pinmux are different from previous sun8i
> series.
> Its processor cores are arragned in two clusters 4 cores each,
> similar to A80.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>

Could you also update Documentation/arm/sunxi/README, so it says A83T
is supported?

Otherwise,

Acked-by: Chen-Yu Tsai <wens@csie.org>

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 3856 bytes --]

Hi,

On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
> +	memory {
> +		reg = <0x40000000 0x80000000>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;

Shouldn't the number of CPUs be 8?

> +		clock-frequency = <24000000>;
> +		arm,cpu-registers-not-fw-configured;
> +	};

Is there some u-boot support for this SoC yet?

If so, both the memory node and the clock-frequency and
arm,cpu-registers-not-fw-configured properties are useless (and
harmful for the latter).

> +	soc@01c00000 {

Please remove the address. It's both wrong and useless.

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		gic: interrupt-controller@01c81000 {
> +			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> +			reg = <0x01c81000 0x1000>,
> +			      <0x01c82000 0x1000>,
> +			      <0x01c84000 0x2000>,
> +			      <0x01c86000 0x2000>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		pio: pinctrl@01c20800 {
> +			compatible = "allwinner,sun8i-a83t-pinctrl";
> +			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;

Please align these lines with the first one, like you did for the
GIC's reg for example.

> +			reg = <0x01c20800 0x400>;
> +			clocks = <&osc24M>;
> +			gpio-controller;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#gpio-cells = <3>;
> +
> +			i2c0_pins_a: i2c0@0 {
> +				allwinner,pins = "PH0", "PH1";
> +				allwinner,function = "i2c0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c1_pins_a: i2c1@0 {
> +				allwinner,pins = "PH2", "PH3";
> +				allwinner,function = "i2c1";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c2_pins_a: i2c2@0 {
> +				allwinner,pins = "PH4", "PH5";
> +				allwinner,function = "i2c2";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc0_pins_a: mmc0@0 {
> +				allwinner,pins = "PF0", "PF1", "PF2",
> +						 "PF3", "PF4", "PF5";
> +				allwinner,function = "mmc0";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc1_pins_a: mmc1@0 {
> +				allwinner,pins = "PG0", "PG1", "PG2",
> +						 "PG3", "PG4", "PG5";
> +				allwinner,function = "mmc1";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc2_8bit_pins: mmc2_8bit {
> +				allwinner,pins = "PC5", "PC6", "PC8",
> +						 "PC9", "PC10", "PC11",
> +						 "PC12", "PC13", "PC14",
> +						 "PC15";
> +				allwinner,function = "mmc2";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_a: uart0@0 {
> +				allwinner,pins = "PF2", "PF4";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_b: uart0@1 {
> +				allwinner,pins = "PB9", "PB10";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};

Are you going to use all these options?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 3989 bytes --]

Hi,

On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
> +	memory {
> +		reg = <0x40000000 0x80000000>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;

Shouldn't the number of CPUs be 8?

> +		clock-frequency = <24000000>;
> +		arm,cpu-registers-not-fw-configured;
> +	};

Is there some u-boot support for this SoC yet?

If so, both the memory node and the clock-frequency and
arm,cpu-registers-not-fw-configured properties are useless (and
harmful for the latter).

> +	soc@01c00000 {

Please remove the address. It's both wrong and useless.

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		gic: interrupt-controller@01c81000 {
> +			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> +			reg = <0x01c81000 0x1000>,
> +			      <0x01c82000 0x1000>,
> +			      <0x01c84000 0x2000>,
> +			      <0x01c86000 0x2000>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		pio: pinctrl@01c20800 {
> +			compatible = "allwinner,sun8i-a83t-pinctrl";
> +			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;

Please align these lines with the first one, like you did for the
GIC's reg for example.

> +			reg = <0x01c20800 0x400>;
> +			clocks = <&osc24M>;
> +			gpio-controller;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#gpio-cells = <3>;
> +
> +			i2c0_pins_a: i2c0@0 {
> +				allwinner,pins = "PH0", "PH1";
> +				allwinner,function = "i2c0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c1_pins_a: i2c1@0 {
> +				allwinner,pins = "PH2", "PH3";
> +				allwinner,function = "i2c1";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c2_pins_a: i2c2@0 {
> +				allwinner,pins = "PH4", "PH5";
> +				allwinner,function = "i2c2";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc0_pins_a: mmc0@0 {
> +				allwinner,pins = "PF0", "PF1", "PF2",
> +						 "PF3", "PF4", "PF5";
> +				allwinner,function = "mmc0";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc1_pins_a: mmc1@0 {
> +				allwinner,pins = "PG0", "PG1", "PG2",
> +						 "PG3", "PG4", "PG5";
> +				allwinner,function = "mmc1";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc2_8bit_pins: mmc2_8bit {
> +				allwinner,pins = "PC5", "PC6", "PC8",
> +						 "PC9", "PC10", "PC11",
> +						 "PC12", "PC13", "PC14",
> +						 "PC15";
> +				allwinner,function = "mmc2";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_a: uart0@0 {
> +				allwinner,pins = "PF2", "PF4";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_b: uart0@1 {
> +				allwinner,pins = "PB9", "PB10";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};

Are you going to use all these options?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

Hi,

On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
> +	memory {
> +		reg = <0x40000000 0x80000000>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;

Shouldn't the number of CPUs be 8?

> +		clock-frequency = <24000000>;
> +		arm,cpu-registers-not-fw-configured;
> +	};

Is there some u-boot support for this SoC yet?

If so, both the memory node and the clock-frequency and
arm,cpu-registers-not-fw-configured properties are useless (and
harmful for the latter).

> +	soc at 01c00000 {

Please remove the address. It's both wrong and useless.

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		gic: interrupt-controller at 01c81000 {
> +			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> +			reg = <0x01c81000 0x1000>,
> +			      <0x01c82000 0x1000>,
> +			      <0x01c84000 0x2000>,
> +			      <0x01c86000 0x2000>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		pio: pinctrl at 01c20800 {
> +			compatible = "allwinner,sun8i-a83t-pinctrl";
> +			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;

Please align these lines with the first one, like you did for the
GIC's reg for example.

> +			reg = <0x01c20800 0x400>;
> +			clocks = <&osc24M>;
> +			gpio-controller;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#gpio-cells = <3>;
> +
> +			i2c0_pins_a: i2c0 at 0 {
> +				allwinner,pins = "PH0", "PH1";
> +				allwinner,function = "i2c0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c1_pins_a: i2c1 at 0 {
> +				allwinner,pins = "PH2", "PH3";
> +				allwinner,function = "i2c1";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			i2c2_pins_a: i2c2 at 0 {
> +				allwinner,pins = "PH4", "PH5";
> +				allwinner,function = "i2c2";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc0_pins_a: mmc0 at 0 {
> +				allwinner,pins = "PF0", "PF1", "PF2",
> +						 "PF3", "PF4", "PF5";
> +				allwinner,function = "mmc0";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc1_pins_a: mmc1 at 0 {
> +				allwinner,pins = "PG0", "PG1", "PG2",
> +						 "PG3", "PG4", "PG5";
> +				allwinner,function = "mmc1";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			mmc2_8bit_pins: mmc2_8bit {
> +				allwinner,pins = "PC5", "PC6", "PC8",
> +						 "PC9", "PC10", "PC11",
> +						 "PC12", "PC13", "PC14",
> +						 "PC15";
> +				allwinner,function = "mmc2";
> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_a: uart0 at 0 {
> +				allwinner,pins = "PF2", "PF4";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};
> +
> +			uart0_pins_b: uart0 at 1 {
> +				allwinner,pins = "PB9", "PB10";
> +				allwinner,function = "uart0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +			};

Are you going to use all these options?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151025/68c3b57a/attachment.sig>

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Chen-Yu Tsai]

On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
<vishnupatekar0510@gmail.com> wrote:
> Allwinner A83T is new octa-core cortex-a7 SOC.
> This adds the basic dtsi, the clocks differs from
> earlier sun8i SOCs.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 247 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 247 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> new file mode 100644
> index 0000000..e85995f
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -0,0 +1,247 @@
> +               cpu@100 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <4>;
> +               };
> +
> +               cpu@101 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <5>;
> +               };
> +               cpu@102 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <6>;
> +               };
> +
> +               cpu@103 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <7>;
> +               };

The reg values are still wrong for the second cluster.

ChenYu

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Chen-Yu Tsai]

On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
<vishnupatekar0510@gmail.com> wrote:
> Allwinner A83T is new octa-core cortex-a7 SOC.
> This adds the basic dtsi, the clocks differs from
> earlier sun8i SOCs.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 247 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 247 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> new file mode 100644
> index 0000000..e85995f
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -0,0 +1,247 @@
> +               cpu at 100 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <4>;
> +               };
> +
> +               cpu at 101 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <5>;
> +               };
> +               cpu at 102 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <6>;
> +               };
> +
> +               cpu at 103 {
> +                       compatible = "arm,cortex-a7";
> +                       device_type = "cpu";
> +                       reg = <7>;
> +               };

The reg values are still wrong for the second cluster.

ChenYu

Re: [PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Vishnu Patekar]

Hello,
Sorry for delayed response.

On Fri, Oct 23, 2015 at 9:37 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
> <vishnupatekar0510@gmail.com> wrote:
>> Allwinner A83T is octa-core cortex-a7 based SoC.
>> It's clock control unit and prcm, pinmux are different from previous sun8i
>> series.
>> Its processor cores are arragned in two clusters 4 cores each,
>> similar to A80.
>>
>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
>
> Could you also update Documentation/arm/sunxi/README, so it says A83T
> is supported?
I'll update and send next version.
>
> Otherwise,
>
> Acked-by: Chen-Yu Tsai <wens@csie.org>

[PATCH v2 1/3] ARM: sunxi: Introduce Allwinner for A83T support

[Vishnu Patekar]

Hello,
Sorry for delayed response.

On Fri, Oct 23, 2015 at 9:37 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Fri, Oct 23, 2015 at 7:46 AM, Vishnu Patekar
> <vishnupatekar0510@gmail.com> wrote:
>> Allwinner A83T is octa-core cortex-a7 based SoC.
>> It's clock control unit and prcm, pinmux are different from previous sun8i
>> series.
>> Its processor cores are arragned in two clusters 4 cores each,
>> similar to A80.
>>
>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
>
> Could you also update Documentation/arm/sunxi/README, so it says A83T
> is supported?
I'll update and send next version.
>
> Otherwise,
>
> Acked-by: Chen-Yu Tsai <wens@csie.org>

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Hello Maxime,
Sorry for delayed response.

On Mon, Oct 26, 2015 at 4:20 AM, Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> Hi,
>
> On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
>> +     memory {
>> +             reg = <0x40000000 0x80000000>;
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv7-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>
> Shouldn't the number of CPUs be 8?
Yes, It should be 8, also need to change in gic node to 8 CPUs.
No, smp support till now, still I'll change it in next patch version.
>
>> +             clock-frequency = <24000000>;
>> +             arm,cpu-registers-not-fw-configured;
>> +     };
>
> Is there some u-boot support for this SoC yet?
recently, I've posted the v2 of u-boot patch.
>
> If so, both the memory node and the clock-frequency and
> arm,cpu-registers-not-fw-configured properties are useless (and
> harmful for the latter).
Correct, As, timer support is added in u-boot, I'll remove these two.
>
>> +     soc@01c00000 {
>
> Please remove the address. It's both wrong and useless.
>
>> +             compatible = "simple-bus";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller@01c81000 {
>> +                     compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
>> +                     reg = <0x01c81000 0x1000>,
>> +                           <0x01c82000 0x1000>,
>> +                           <0x01c84000 0x2000>,
>> +                           <0x01c86000 0x2000>;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             pio: pinctrl@01c20800 {
>> +                     compatible = "allwinner,sun8i-a83t-pinctrl";
>> +                     interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>
> Please align these lines with the first one, like you did for the
> GIC's reg for example.
Okie.
>
>> +                     reg = <0x01c20800 0x400>;
>> +                     clocks = <&osc24M>;
>> +                     gpio-controller;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     #gpio-cells = <3>;
>> +
>> +                     i2c0_pins_a: i2c0@0 {
>> +                             allwinner,pins = "PH0", "PH1";
>> +                             allwinner,function = "i2c0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c1_pins_a: i2c1@0 {
>> +                             allwinner,pins = "PH2", "PH3";
>> +                             allwinner,function = "i2c1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c2_pins_a: i2c2@0 {
>> +                             allwinner,pins = "PH4", "PH5";
>> +                             allwinner,function = "i2c2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc0_pins_a: mmc0@0 {
>> +                             allwinner,pins = "PF0", "PF1", "PF2",
>> +                                              "PF3", "PF4", "PF5";
>> +                             allwinner,function = "mmc0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc1_pins_a: mmc1@0 {
>> +                             allwinner,pins = "PG0", "PG1", "PG2",
>> +                                              "PG3", "PG4", "PG5";
>> +                             allwinner,function = "mmc1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc2_8bit_pins: mmc2_8bit {
>> +                             allwinner,pins = "PC5", "PC6", "PC8",
>> +                                              "PC9", "PC10", "PC11",
>> +                                              "PC12", "PC13", "PC14",
>> +                                              "PC15";
>> +                             allwinner,function = "mmc2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_a: uart0@0 {
>> +                             allwinner,pins = "PF2", "PF4";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_b: uart0@1 {
>> +                             allwinner,pins = "PB9", "PB10";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>
> Are you going to use all these options?
Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
As, these are not enabled, I don't see any harm in keeping those here.

Let me know in case you want to remove, I'll do it.

>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Hello Maxime,
Sorry for delayed response.

On Mon, Oct 26, 2015 at 4:20 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi,
>
> On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
>> +     memory {
>> +             reg = <0x40000000 0x80000000>;
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv7-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>
> Shouldn't the number of CPUs be 8?
Yes, It should be 8, also need to change in gic node to 8 CPUs.
No, smp support till now, still I'll change it in next patch version.
>
>> +             clock-frequency = <24000000>;
>> +             arm,cpu-registers-not-fw-configured;
>> +     };
>
> Is there some u-boot support for this SoC yet?
recently, I've posted the v2 of u-boot patch.
>
> If so, both the memory node and the clock-frequency and
> arm,cpu-registers-not-fw-configured properties are useless (and
> harmful for the latter).
Correct, As, timer support is added in u-boot, I'll remove these two.
>
>> +     soc@01c00000 {
>
> Please remove the address. It's both wrong and useless.
>
>> +             compatible = "simple-bus";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller@01c81000 {
>> +                     compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
>> +                     reg = <0x01c81000 0x1000>,
>> +                           <0x01c82000 0x1000>,
>> +                           <0x01c84000 0x2000>,
>> +                           <0x01c86000 0x2000>;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             pio: pinctrl@01c20800 {
>> +                     compatible = "allwinner,sun8i-a83t-pinctrl";
>> +                     interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>
> Please align these lines with the first one, like you did for the
> GIC's reg for example.
Okie.
>
>> +                     reg = <0x01c20800 0x400>;
>> +                     clocks = <&osc24M>;
>> +                     gpio-controller;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     #gpio-cells = <3>;
>> +
>> +                     i2c0_pins_a: i2c0@0 {
>> +                             allwinner,pins = "PH0", "PH1";
>> +                             allwinner,function = "i2c0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c1_pins_a: i2c1@0 {
>> +                             allwinner,pins = "PH2", "PH3";
>> +                             allwinner,function = "i2c1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c2_pins_a: i2c2@0 {
>> +                             allwinner,pins = "PH4", "PH5";
>> +                             allwinner,function = "i2c2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc0_pins_a: mmc0@0 {
>> +                             allwinner,pins = "PF0", "PF1", "PF2",
>> +                                              "PF3", "PF4", "PF5";
>> +                             allwinner,function = "mmc0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc1_pins_a: mmc1@0 {
>> +                             allwinner,pins = "PG0", "PG1", "PG2",
>> +                                              "PG3", "PG4", "PG5";
>> +                             allwinner,function = "mmc1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc2_8bit_pins: mmc2_8bit {
>> +                             allwinner,pins = "PC5", "PC6", "PC8",
>> +                                              "PC9", "PC10", "PC11",
>> +                                              "PC12", "PC13", "PC14",
>> +                                              "PC15";
>> +                             allwinner,function = "mmc2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_a: uart0@0 {
>> +                             allwinner,pins = "PF2", "PF4";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_b: uart0@1 {
>> +                             allwinner,pins = "PB9", "PB10";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>
> Are you going to use all these options?
Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
As, these are not enabled, I don't see any harm in keeping those here.

Let me know in case you want to remove, I'll do it.

>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Vishnu Patekar]

Hello Maxime,
Sorry for delayed response.

On Mon, Oct 26, 2015 at 4:20 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi,
>
> On Fri, Oct 23, 2015 at 07:46:16AM +0800, Vishnu Patekar wrote:
>> +     memory {
>> +             reg = <0x40000000 0x80000000>;
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv7-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>
> Shouldn't the number of CPUs be 8?
Yes, It should be 8, also need to change in gic node to 8 CPUs.
No, smp support till now, still I'll change it in next patch version.
>
>> +             clock-frequency = <24000000>;
>> +             arm,cpu-registers-not-fw-configured;
>> +     };
>
> Is there some u-boot support for this SoC yet?
recently, I've posted the v2 of u-boot patch.
>
> If so, both the memory node and the clock-frequency and
> arm,cpu-registers-not-fw-configured properties are useless (and
> harmful for the latter).
Correct, As, timer support is added in u-boot, I'll remove these two.
>
>> +     soc at 01c00000 {
>
> Please remove the address. It's both wrong and useless.
>
>> +             compatible = "simple-bus";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller at 01c81000 {
>> +                     compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
>> +                     reg = <0x01c81000 0x1000>,
>> +                           <0x01c82000 0x1000>,
>> +                           <0x01c84000 0x2000>,
>> +                           <0x01c86000 0x2000>;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             pio: pinctrl at 01c20800 {
>> +                     compatible = "allwinner,sun8i-a83t-pinctrl";
>> +                     interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>
> Please align these lines with the first one, like you did for the
> GIC's reg for example.
Okie.
>
>> +                     reg = <0x01c20800 0x400>;
>> +                     clocks = <&osc24M>;
>> +                     gpio-controller;
>> +                     interrupt-controller;
>> +                     #interrupt-cells = <3>;
>> +                     #gpio-cells = <3>;
>> +
>> +                     i2c0_pins_a: i2c0 at 0 {
>> +                             allwinner,pins = "PH0", "PH1";
>> +                             allwinner,function = "i2c0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c1_pins_a: i2c1 at 0 {
>> +                             allwinner,pins = "PH2", "PH3";
>> +                             allwinner,function = "i2c1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     i2c2_pins_a: i2c2 at 0 {
>> +                             allwinner,pins = "PH4", "PH5";
>> +                             allwinner,function = "i2c2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc0_pins_a: mmc0 at 0 {
>> +                             allwinner,pins = "PF0", "PF1", "PF2",
>> +                                              "PF3", "PF4", "PF5";
>> +                             allwinner,function = "mmc0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc1_pins_a: mmc1 at 0 {
>> +                             allwinner,pins = "PG0", "PG1", "PG2",
>> +                                              "PG3", "PG4", "PG5";
>> +                             allwinner,function = "mmc1";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     mmc2_8bit_pins: mmc2_8bit {
>> +                             allwinner,pins = "PC5", "PC6", "PC8",
>> +                                              "PC9", "PC10", "PC11",
>> +                                              "PC12", "PC13", "PC14",
>> +                                              "PC15";
>> +                             allwinner,function = "mmc2";
>> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_a: uart0 at 0 {
>> +                             allwinner,pins = "PF2", "PF4";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>> +
>> +                     uart0_pins_b: uart0 at 1 {
>> +                             allwinner,pins = "PB9", "PB10";
>> +                             allwinner,function = "uart0";
>> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +                     };
>
> Are you going to use all these options?
Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
As, these are not enabled, I don't see any harm in keeping those here.

Let me know in case you want to remove, I'll do it.

>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 4141 bytes --]

Hi!

On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> +                     reg = <0x01c20800 0x400>;
> >> +                     clocks = <&osc24M>;
> >> +                     gpio-controller;
> >> +                     interrupt-controller;
> >> +                     #interrupt-cells = <3>;
> >> +                     #gpio-cells = <3>;
> >> +
> >> +                     i2c0_pins_a: i2c0@0 {
> >> +                             allwinner,pins = "PH0", "PH1";
> >> +                             allwinner,function = "i2c0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c1_pins_a: i2c1@0 {
> >> +                             allwinner,pins = "PH2", "PH3";
> >> +                             allwinner,function = "i2c1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c2_pins_a: i2c2@0 {
> >> +                             allwinner,pins = "PH4", "PH5";
> >> +                             allwinner,function = "i2c2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc0_pins_a: mmc0@0 {
> >> +                             allwinner,pins = "PF0", "PF1", "PF2",
> >> +                                              "PF3", "PF4", "PF5";
> >> +                             allwinner,function = "mmc0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc1_pins_a: mmc1@0 {
> >> +                             allwinner,pins = "PG0", "PG1", "PG2",
> >> +                                              "PG3", "PG4", "PG5";
> >> +                             allwinner,function = "mmc1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc2_8bit_pins: mmc2_8bit {
> >> +                             allwinner,pins = "PC5", "PC6", "PC8",
> >> +                                              "PC9", "PC10", "PC11",
> >> +                                              "PC12", "PC13", "PC14",
> >> +                                              "PC15";
> >> +                             allwinner,function = "mmc2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_a: uart0@0 {
> >> +                             allwinner,pins = "PF2", "PF4";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_b: uart0@1 {
> >> +                             allwinner,pins = "PB9", "PB10";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.

It bloats the DT for no particular reason.

> Let me know in case you want to remove, I'll do it.

Yes, please.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 4231 bytes --]

Hi!

On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> +                     reg = <0x01c20800 0x400>;
> >> +                     clocks = <&osc24M>;
> >> +                     gpio-controller;
> >> +                     interrupt-controller;
> >> +                     #interrupt-cells = <3>;
> >> +                     #gpio-cells = <3>;
> >> +
> >> +                     i2c0_pins_a: i2c0@0 {
> >> +                             allwinner,pins = "PH0", "PH1";
> >> +                             allwinner,function = "i2c0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c1_pins_a: i2c1@0 {
> >> +                             allwinner,pins = "PH2", "PH3";
> >> +                             allwinner,function = "i2c1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c2_pins_a: i2c2@0 {
> >> +                             allwinner,pins = "PH4", "PH5";
> >> +                             allwinner,function = "i2c2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc0_pins_a: mmc0@0 {
> >> +                             allwinner,pins = "PF0", "PF1", "PF2",
> >> +                                              "PF3", "PF4", "PF5";
> >> +                             allwinner,function = "mmc0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc1_pins_a: mmc1@0 {
> >> +                             allwinner,pins = "PG0", "PG1", "PG2",
> >> +                                              "PG3", "PG4", "PG5";
> >> +                             allwinner,function = "mmc1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc2_8bit_pins: mmc2_8bit {
> >> +                             allwinner,pins = "PC5", "PC6", "PC8",
> >> +                                              "PC9", "PC10", "PC11",
> >> +                                              "PC12", "PC13", "PC14",
> >> +                                              "PC15";
> >> +                             allwinner,function = "mmc2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_a: uart0@0 {
> >> +                             allwinner,pins = "PF2", "PF4";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_b: uart0@1 {
> >> +                             allwinner,pins = "PB9", "PB10";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.

It bloats the DT for no particular reason.

> Let me know in case you want to remove, I'll do it.

Yes, please.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Maxime Ripard]

Hi!

On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> +                     reg = <0x01c20800 0x400>;
> >> +                     clocks = <&osc24M>;
> >> +                     gpio-controller;
> >> +                     interrupt-controller;
> >> +                     #interrupt-cells = <3>;
> >> +                     #gpio-cells = <3>;
> >> +
> >> +                     i2c0_pins_a: i2c0 at 0 {
> >> +                             allwinner,pins = "PH0", "PH1";
> >> +                             allwinner,function = "i2c0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c1_pins_a: i2c1 at 0 {
> >> +                             allwinner,pins = "PH2", "PH3";
> >> +                             allwinner,function = "i2c1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c2_pins_a: i2c2 at 0 {
> >> +                             allwinner,pins = "PH4", "PH5";
> >> +                             allwinner,function = "i2c2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc0_pins_a: mmc0 at 0 {
> >> +                             allwinner,pins = "PF0", "PF1", "PF2",
> >> +                                              "PF3", "PF4", "PF5";
> >> +                             allwinner,function = "mmc0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc1_pins_a: mmc1 at 0 {
> >> +                             allwinner,pins = "PG0", "PG1", "PG2",
> >> +                                              "PG3", "PG4", "PG5";
> >> +                             allwinner,function = "mmc1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc2_8bit_pins: mmc2_8bit {
> >> +                             allwinner,pins = "PC5", "PC6", "PC8",
> >> +                                              "PC9", "PC10", "PC11",
> >> +                                              "PC12", "PC13", "PC14",
> >> +                                              "PC15";
> >> +                             allwinner,function = "mmc2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_a: uart0 at 0 {
> >> +                             allwinner,pins = "PF2", "PF4";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_b: uart0 at 1 {
> >> +                             allwinner,pins = "PB9", "PB10";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.

It bloats the DT for no particular reason.

> Let me know in case you want to remove, I'll do it.

Yes, please.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151201/2217a184/attachment.sig>