* [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
@ 2020-02-04 17:42 ` Jordan Crouse
0 siblings, 0 replies; 8+ messages in thread
From: Jordan Crouse @ 2020-02-04 17:42 UTC (permalink / raw)
To: linux-arm-msm
Cc: Sean Paul, Sharat Masetty, dri-devel, linux-kernel, Rob Clark,
David Airlie, freedreno, Daniel Vetter
Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
universal GBIF un-halt into a6xx_start(). This can cause problems for
a630 targets which do not use GBIF and might have access protection
enabled on the region now occupied by the GBIF registers.
But it turns out that we didn't need to unhalt the GBIF in this path
since the stop function already takes care of that after executing a flush
but before turning off the headswitch. We should be confident that the
GBIF is open for business when we restart the hardware.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index daf0780..e51c723 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
int ret;
- /*
- * During a previous slumber, GBIF halt is asserted to ensure
- * no further transaction can go through GPU before GPU
- * headswitch is turned off.
- *
- * This halt is deasserted once headswitch goes off but
- * incase headswitch doesn't goes off clear GBIF halt
- * here to ensure GPU wake-up doesn't fail because of
- * halted GPU transactions.
- */
- gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
-
/* Make sure the GMU keeps the GPU on while we set it up */
a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
@ 2020-02-04 17:42 ` Jordan Crouse
0 siblings, 0 replies; 8+ messages in thread
From: Jordan Crouse @ 2020-02-04 17:42 UTC (permalink / raw)
To: linux-arm-msm
Cc: David Airlie, freedreno, Sharat Masetty, linux-kernel, dri-devel,
Sean Paul
Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
universal GBIF un-halt into a6xx_start(). This can cause problems for
a630 targets which do not use GBIF and might have access protection
enabled on the region now occupied by the GBIF registers.
But it turns out that we didn't need to unhalt the GBIF in this path
since the stop function already takes care of that after executing a flush
but before turning off the headswitch. We should be confident that the
GBIF is open for business when we restart the hardware.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index daf0780..e51c723 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
int ret;
- /*
- * During a previous slumber, GBIF halt is asserted to ensure
- * no further transaction can go through GPU before GPU
- * headswitch is turned off.
- *
- * This halt is deasserted once headswitch goes off but
- * incase headswitch doesn't goes off clear GBIF halt
- * here to ensure GPU wake-up doesn't fail because of
- * halted GPU transactions.
- */
- gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
-
/* Make sure the GMU keeps the GPU on while we set it up */
a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
2020-02-04 17:42 ` Jordan Crouse
@ 2020-02-04 18:03 ` Rob Clark
-1 siblings, 0 replies; 8+ messages in thread
From: Rob Clark @ 2020-02-04 18:03 UTC (permalink / raw)
To: Jordan Crouse
Cc: linux-arm-msm, Sean Paul, Sharat Masetty, dri-devel,
Linux Kernel Mailing List, David Airlie, freedreno,
Daniel Vetter, John Stultz
+jstultz
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
>
> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index daf0780..e51c723 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
> int ret;
>
> - /*
> - * During a previous slumber, GBIF halt is asserted to ensure
> - * no further transaction can go through GPU before GPU
> - * headswitch is turned off.
> - *
> - * This halt is deasserted once headswitch goes off but
> - * incase headswitch doesn't goes off clear GBIF halt
> - * here to ensure GPU wake-up doesn't fail because of
> - * halted GPU transactions.
> - */
> - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
> -
> /* Make sure the GMU keeps the GPU on while we set it up */
> a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
@ 2020-02-04 18:03 ` Rob Clark
0 siblings, 0 replies; 8+ messages in thread
From: Rob Clark @ 2020-02-04 18:03 UTC (permalink / raw)
To: Jordan Crouse
Cc: freedreno, David Airlie, linux-arm-msm, Sharat Masetty,
Linux Kernel Mailing List, dri-devel, Sean Paul
+jstultz
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
>
> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index daf0780..e51c723 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
> int ret;
>
> - /*
> - * During a previous slumber, GBIF halt is asserted to ensure
> - * no further transaction can go through GPU before GPU
> - * headswitch is turned off.
> - *
> - * This halt is deasserted once headswitch goes off but
> - * incase headswitch doesn't goes off clear GBIF halt
> - * here to ensure GPU wake-up doesn't fail because of
> - * halted GPU transactions.
> - */
> - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
> -
> /* Make sure the GMU keeps the GPU on while we set it up */
> a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>
> --
> 2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
2020-02-04 17:42 ` Jordan Crouse
@ 2020-02-05 20:41 ` John Stultz
-1 siblings, 0 replies; 8+ messages in thread
From: John Stultz @ 2020-02-05 20:41 UTC (permalink / raw)
To: Jordan Crouse
Cc: linux-arm-msm, David Airlie, freedreno, Sharat Masetty, lkml,
dri-devel, Sean Paul
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Sorry, yesterday got busy with other things and I didn't get around to
testing your patch, but I have tested earlier with my own patch which
is identical:
https://git.linaro.org/people/john.stultz/android-dev.git/commit/?h=dev/db845c-mainline-WIP&id=4e6a2e84dd77fe74faa1a6b797eb0ee7bf11ffd7
So, I think I can safely add:
Tested-by: John Stultz <john.stultz@linaro.org>
Thanks so much for the quick turnaround on this!
-john
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
@ 2020-02-05 20:41 ` John Stultz
0 siblings, 0 replies; 8+ messages in thread
From: John Stultz @ 2020-02-05 20:41 UTC (permalink / raw)
To: Jordan Crouse
Cc: Sean Paul, David Airlie, linux-arm-msm, Sharat Masetty, lkml,
dri-devel, freedreno
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Sorry, yesterday got busy with other things and I didn't get around to
testing your patch, but I have tested earlier with my own patch which
is identical:
https://git.linaro.org/people/john.stultz/android-dev.git/commit/?h=dev/db845c-mainline-WIP&id=4e6a2e84dd77fe74faa1a6b797eb0ee7bf11ffd7
So, I think I can safely add:
Tested-by: John Stultz <john.stultz@linaro.org>
Thanks so much for the quick turnaround on this!
-john
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
2020-02-04 17:42 ` Jordan Crouse
@ 2020-02-05 21:20 ` Rob Clark
-1 siblings, 0 replies; 8+ messages in thread
From: Rob Clark @ 2020-02-05 21:20 UTC (permalink / raw)
To: Jordan Crouse
Cc: linux-arm-msm, Sean Paul, Sharat Masetty, dri-devel,
Linux Kernel Mailing List, David Airlie, freedreno,
Daniel Vetter
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618")
> ---
>
> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index daf0780..e51c723 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
> int ret;
>
> - /*
> - * During a previous slumber, GBIF halt is asserted to ensure
> - * no further transaction can go through GPU before GPU
> - * headswitch is turned off.
> - *
> - * This halt is deasserted once headswitch goes off but
> - * incase headswitch doesn't goes off clear GBIF halt
> - * here to ensure GPU wake-up doesn't fail because of
> - * halted GPU transactions.
> - */
> - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
> -
> /* Make sure the GMU keeps the GPU on while we set it up */
> a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
@ 2020-02-05 21:20 ` Rob Clark
0 siblings, 0 replies; 8+ messages in thread
From: Rob Clark @ 2020-02-05 21:20 UTC (permalink / raw)
To: Jordan Crouse
Cc: freedreno, David Airlie, linux-arm-msm, Sharat Masetty,
Linux Kernel Mailing List, dri-devel, Sean Paul
On Tue, Feb 4, 2020 at 9:42 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a
> universal GBIF un-halt into a6xx_start(). This can cause problems for
> a630 targets which do not use GBIF and might have access protection
> enabled on the region now occupied by the GBIF registers.
>
> But it turns out that we didn't need to unhalt the GBIF in this path
> since the stop function already takes care of that after executing a flush
> but before turning off the headswitch. We should be confident that the
> GBIF is open for business when we restart the hardware.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618")
> ---
>
> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index daf0780..e51c723 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
> int ret;
>
> - /*
> - * During a previous slumber, GBIF halt is asserted to ensure
> - * no further transaction can go through GPU before GPU
> - * headswitch is turned off.
> - *
> - * This halt is deasserted once headswitch goes off but
> - * incase headswitch doesn't goes off clear GBIF halt
> - * here to ensure GPU wake-up doesn't fail because of
> - * halted GPU transactions.
> - */
> - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0);
> -
> /* Make sure the GMU keeps the GPU on while we set it up */
> a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>
> --
> 2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-02-05 21:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-04 17:42 [PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt Jordan Crouse
2020-02-04 17:42 ` Jordan Crouse
2020-02-04 18:03 ` Rob Clark
2020-02-04 18:03 ` Rob Clark
2020-02-05 20:41 ` John Stultz
2020-02-05 20:41 ` John Stultz
2020-02-05 21:20 ` Rob Clark
2020-02-05 21:20 ` Rob Clark
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.