[DPU PATCH v3 2/5] drm: add constant N value in helper file

[DPU PATCH v3 2/5] drm: add constant N value in helper file

[Chandan Uddaraju]

The constant N value (0x8000) is used by multiple DP
drivers. Define this value in header file and use this
in the existing i915 display driver.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/i915/display/intel_display.c | 2 +-
 include/drm/drm_dp_helper.h                  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index ce05e80..1a4ccfd 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7496,7 +7496,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
 	 * which the devices expect also in synchronous clock mode.
 	 */
 	if (constant_n)
-		*ret_n = 0x8000;
+		*ret_n = DP_LINK_CONSTANT_N_VALUE;
 	else
 		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
 
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 8364502..69b8251 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1357,6 +1357,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
  * DisplayPort link
  */
 #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
+#define DP_LINK_CONSTANT_N_VALUE 0x8000
 
 struct drm_dp_link {
 	unsigned char revision;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[DPU PATCH v3 2/5] drm: add constant N value in helper file

[Chandan Uddaraju]

The constant N value (0x8000) is used by multiple DP
drivers. Define this value in header file and use this
in the existing i915 display driver.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/i915/display/intel_display.c | 2 +-
 include/drm/drm_dp_helper.h                  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index ce05e80..1a4ccfd 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7496,7 +7496,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
 	 * which the devices expect also in synchronous clock mode.
 	 */
 	if (constant_n)
-		*ret_n = 0x8000;
+		*ret_n = DP_LINK_CONSTANT_N_VALUE;
 	else
 		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
 
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 8364502..69b8251 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1357,6 +1357,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
  * DisplayPort link
  */
 #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
+#define DP_LINK_CONSTANT_N_VALUE 0x8000
 
 struct drm_dp_link {
 	unsigned char revision;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 2/5] drm: add constant N value in helper file

[Jani Nikula]

On Mon, 02 Dec 2019, Chandan Uddaraju <chandanu@codeaurora.org> wrote:
> The constant N value (0x8000) is used by multiple DP
> drivers. Define this value in header file and use this
> in the existing i915 display driver.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

and ack for merging via drm-misc or whichever tree you find suitable.


> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 2 +-
>  include/drm/drm_dp_helper.h                  | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index ce05e80..1a4ccfd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7496,7 +7496,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
>  	 * which the devices expect also in synchronous clock mode.
>  	 */
>  	if (constant_n)
> -		*ret_n = 0x8000;
> +		*ret_n = DP_LINK_CONSTANT_N_VALUE;
>  	else
>  		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
>  
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 8364502..69b8251 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1357,6 +1357,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>   * DisplayPort link
>   */
>  #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
> +#define DP_LINK_CONSTANT_N_VALUE 0x8000
>  
>  struct drm_dp_link {
>  	unsigned char revision;

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [DPU PATCH v3 2/5] drm: add constant N value in helper file

[Jani Nikula]

On Mon, 02 Dec 2019, Chandan Uddaraju <chandanu@codeaurora.org> wrote:
> The constant N value (0x8000) is used by multiple DP
> drivers. Define this value in header file and use this
> in the existing i915 display driver.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

and ack for merging via drm-misc or whichever tree you find suitable.


> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 2 +-
>  include/drm/drm_dp_helper.h                  | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index ce05e80..1a4ccfd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7496,7 +7496,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
>  	 * which the devices expect also in synchronous clock mode.
>  	 */
>  	if (constant_n)
> -		*ret_n = 0x8000;
> +		*ret_n = DP_LINK_CONSTANT_N_VALUE;
>  	else
>  		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
>  
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 8364502..69b8251 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1357,6 +1357,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>   * DisplayPort link
>   */
>  #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
> +#define DP_LINK_CONSTANT_N_VALUE 0x8000
>  
>  struct drm_dp_link {
>  	unsigned char revision;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 2/5] drm: add constant N value in helper file

[Jani Nikula]

On Mon, 02 Dec 2019, Chandan Uddaraju <chandanu@codeaurora.org> wrote:
> The constant N value (0x8000) is used by multiple DP
> drivers. Define this value in header file and use this
> in the existing i915 display driver.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

and ack for merging via drm-misc or whichever tree you find suitable.


> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 2 +-
>  include/drm/drm_dp_helper.h                  | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index ce05e80..1a4ccfd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7496,7 +7496,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
>  	 * which the devices expect also in synchronous clock mode.
>  	 */
>  	if (constant_n)
> -		*ret_n = 0x8000;
> +		*ret_n = DP_LINK_CONSTANT_N_VALUE;
>  	else
>  		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
>  
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 8364502..69b8251 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1357,6 +1357,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>   * DisplayPort link
>   */
>  #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
> +#define DP_LINK_CONSTANT_N_VALUE 0x8000
>  
>  struct drm_dp_link {
>  	unsigned char revision;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Chandan Uddaraju]

Add bindings for Snapdragon 845 DisplayPort and
display-port PLL driver.

Changes in V2:
Provide details about sel-gpio

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
 .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
 2 files changed, 261 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt

diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
new file mode 100644
index 0000000..38be36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp.txt
@@ -0,0 +1,249 @@
+Qualcomm Technologies, Inc.
+DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
+DP Controller: Required properties:
+- compatible:           Should be "qcom,dp-display".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the controller instance.
+- reg-names:            A list of strings that name the list of regs.
+			"dp_ahb" - DP controller memory region.
+			"dp_aux" - DP AUX memory region.
+			"dp_link" - DP link layer memory region.
+			"dp_p0" - DP pixel clock domain memory region.
+			"dp_phy" - DP PHY memory region.
+			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
+			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
+			"dp_mmss_cc" - Display Clock Control memory region.
+			"qfprom_physical" - QFPROM Phys memory region.
+			"dp_pll" - USB3 DP combo PLL memory region.
+			"usb3_dp_com" - USB3 DP PHY combo memory region.
+			"hdcp_physical" - DP HDCP memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
+			"ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".
+- pll-node:		phandle to DP PLL node.
+- vdda-1p2-supply:		phandle to vdda 1.2V regulator node.
+- vdda-0p9-supply:		phandle to vdda 0.9V regulator node.
+- qcom,aux-cfg0-settings:		Specifies the DP AUX configuration 0 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg1-settings:		Specifies the DP AUX configuration 1 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg2-settings:		Specifies the DP AUX configuration 2 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg3-settings:		Specifies the DP AUX configuration 3 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg4-settings:		Specifies the DP AUX configuration 4 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg5-settings:		Specifies the DP AUX configuration 5 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg6-settings:		Specifies the DP AUX configuration 6 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg7-settings:		Specifies the DP AUX configuration 7 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg8-settings:		Specifies the DP AUX configuration 8 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg9-settings:		Specifies the DP AUX configuration 9 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,max-pclk-frequency-khz:	An integer specifying the maximum. pixel clock in KHz supported by Display Port.
+- extcon:				Phandle for the external connector class interface.
+- qcom,<type>-supply-entries:		A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
+					can be "core", "ctrl", and "phy". Within the same type,
+					there can be more than one instance of this binding,
+					in which case the entry would be appended with the
+					supply entry index.
+					e.g. qcom,ctrl-supply-entry@0
+					-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
+					-- qcom,supply-min-voltage: minimum voltage level (uV)
+					-- qcom,supply-max-voltage: maximum voltage level (uV)
+					-- qcom,supply-enable-load: load drawn (uA) from enabled supply
+					-- qcom,supply-disable-load: load drawn (uA) from disabled supply
+					-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
+					-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
+					-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
+					-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
+- pinctrl-names:	List of names to assign mdss pin states defined in pinctrl device node
+					Refer to pinctrl-bindings.txt
+- pinctrl-<0..n>:	Lists phandles each pointing to the pin configuration node within a pin
+					controller. These pin configurations are installed in the pinctrl
+					device node. Refer to pinctrl-bindings.txt
+DP Endpoint properties:
+  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
+    input endpoint. For port@1, set to the DPU interface output. See [2] for
+    device graph info.
+
+Optional properties:
+- qcom,aux-en-gpio:		Specifies the aux-channel enable gpio.
+- qcom,aux-sel-gpio:		Specifies the mux-selection that might be needed for aux interface.
+
+
+DP PLL: Required properties:
+- compatible:           Should be "qcom,dp-pll-10nm".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the PLL instance.
+- reg-names:            A list of strings that name the list of regs.
+			"pll_base" - DP PLL memory region.
+			"phy_base" - DP PHY memory region.
+			"ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
+			"ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
+			"gdsc_base" - gdsc memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
+- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value			     is set to zero so that minimum clock value is configured. Non-zero clock
+			value can be used to configure DP pixel clock.
+
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/graph.txt
+
+Example:
+	msm_dp: dp_display@ae90000{
+		cell-index = <0>;
+		compatible = "qcom,dp-display";
+
+		reg =   <0 0x90000 0x0dc>,
+			<0 0x90200 0x0c0>,
+			<0 0x90400 0x508>,
+			<0 0x90a00 0x094>,
+			<1 0xeaa00 0x200>,
+			<1 0xea200 0x200>,
+			<1 0xea600 0x200>,
+			<2 0x02000 0x1a0>,
+			<3 0x00000 0x621c>,
+			<1 0xea000 0x180>,
+			<1 0xe8000 0x20>,
+			<4 0xe1000 0x034>;
+		reg-names = "dp_ahb", "dp_aux", "dp_link",
+			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
+			"dp_mmss_cc", "qfprom_physical", "dp_pll",
+			"usb3_dp_com", "hdcp_physical";
+
+		interrupt-parent = <&mdss>;
+		interrupts = <12 0>;
+
+		extcon = <&usb_1_ssphy>;
+		clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+			<&rpmhcc RPMH_CXO_CLK>,
+			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+		clock-names = "core_aux_clk", "core_ref_clk_src",
+			"core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk",
+			"ctrl_link_iface_clk", "ctrl_pixel_clk",
+			"crypto_clk", "pixel_clk_rcg";
+
+		pll-node = <&dp_pll>;
+		qcom,aux-cfg0-settings = [20 00];
+		qcom,aux-cfg1-settings = [24 13 23 1d];
+		qcom,aux-cfg2-settings = [28 24];
+		qcom,aux-cfg3-settings = [2c 00];
+		qcom,aux-cfg4-settings = [30 0a];
+		qcom,aux-cfg5-settings = [34 26];
+		qcom,aux-cfg6-settings = [38 0a];
+		qcom,aux-cfg7-settings = [3c 03];
+		qcom,aux-cfg8-settings = [40 bb];
+		qcom,aux-cfg9-settings = [44 03];
+
+		qcom,max-pclk-frequency-khz = <675000>;
+
+		qcom,ctrl-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,ctrl-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-1p2";
+				qcom,supply-min-voltage = <1200000>;
+				qcom,supply-max-voltage = <1200000>;
+				qcom,supply-enable-load = <21800>;
+				qcom,supply-disable-load = <4>;
+			};
+		};
+
+		qcom,phy-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,phy-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-0p9";
+				qcom,supply-min-voltage = <880000>;
+				qcom,supply-max-voltage = <880000>;
+				qcom,supply-enable-load = <36000>;
+				qcom,supply-disable-load = <32>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dp_in: endpoint {
+					remote-endpoint = <&dpu_intf0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dp_out: endpoint {
+				};
+			};
+		};
+	};
+
+	dp_pll: dp-pll@c011000 {
+		compatible = "qcom,dp-pll-10nm";
+		label = "DP PLL";
+		cell-index = <0>;
+		#clock-cells = <1>;
+
+		reg = <1 0xea000 0x200>,
+		      <1 0xeaa00 0x200>,
+		      <1 0xea200 0x200>,
+		      <1 0xea600 0x200>,
+		      <2 0x03000 0x8>;
+		reg-names = "pll_base", "phy_base", "ln_tx0_base",
+			"ln_tx1_base", "gdsc_base";
+
+		clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+			 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+		clock-names = "iface_clk", "ref_clk",
+			"cfg_ahb_clk", "pipe_clk";
+		clock-rate = <0>;
+
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index a61dd40..eac6e1c 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -63,8 +63,9 @@ Required properties:
 	Documentation/devicetree/bindings/graph.txt
 	Documentation/devicetree/bindings/media/video-interfaces.txt
 
-	Port 0 -> DPU_INTF1 (DSI1)
-	Port 1 -> DPU_INTF2 (DSI2)
+	Port 0 -> DPU_INTF0 (DP)
+	Port 1 -> DPU_INTF1 (DSI1)
+	Port 2 -> DPU_INTF2 (DSI2)
 
 Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -125,13 +126,20 @@ Example:
 
 				port@0 {
 					reg = <0>;
-					dpu_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
+					dpu_intf0_out: endpoint {
+						remote-endpoint = <&dp_in>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
+					dpu_intf1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
 					dpu_intf2_out: endpoint {
 						remote-endpoint = <&dsi1_in>;
 					};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Rob Herring]

On Mon, Dec 02, 2019 at 01:47:45PM +0000, Chandan Uddaraju wrote:
> Add bindings for Snapdragon 845 DisplayPort and
> display-port PLL driver.

Is it just me, but I keep getting 2 copies of codeaurora emails?

> 
> Changes in V2:
> Provide details about sel-gpio

This is V3, what changed in V3?

> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
>  2 files changed, 261 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt

New bindings should be in DT schema format.

> diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
> new file mode 100644
> index 0000000..38be36d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp.txt
> @@ -0,0 +1,249 @@
> +Qualcomm Technologies, Inc.
> +DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
> +DP Controller: Required properties:
> +- compatible:           Should be "qcom,dp-display".

Needs to be more specific like including the SoC name.

> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the controller instance.

FDT doesn't use cell-index.

> +- reg-names:            A list of strings that name the list of regs.
> +			"dp_ahb" - DP controller memory region.
> +			"dp_aux" - DP AUX memory region.
> +			"dp_link" - DP link layer memory region.
> +			"dp_p0" - DP pixel clock domain memory region.
> +			"dp_phy" - DP PHY memory region.
> +			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
> +			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
> +			"dp_mmss_cc" - Display Clock Control memory region.

Sounds like a separate clock controller node...

> +			"qfprom_physical" - QFPROM Phys memory region.
> +			"dp_pll" - USB3 DP combo PLL memory region.
> +			"usb3_dp_com" - USB3 DP PHY combo memory region.

Should be a separate phy node?

> +			"hdcp_physical" - DP HDCP memory region.

The 'dp_' part is redundant.

What does 'physical' mean? Addresses in DT are always physical.

> +- interrupt-parent	phandle to the interrupt parent device node.

Don't document interrupt-parent. It's not required either because it 
could be in a parent node.

> +- interrupts:		The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +			"core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +			"core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
> +			"ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".

Clocks should be actual clock inputs to the module. If 'pixel_parent' is 
just some parent clock you want to assign, then use assigned-clocks.

> +- pll-node:		phandle to DP PLL node.

But you have a DP PLL reg region defined. Is this something else?

Needs a 'qcom' prefix if it stays.

> +- vdda-1p2-supply:		phandle to vdda 1.2V regulator node.
> +- vdda-0p9-supply:		phandle to vdda 0.9V regulator node.
> +- qcom,aux-cfg0-settings:		Specifies the DP AUX configuration 0 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.

Needs more details on what these are and why they must be in DT. We 
generally don't just stuff DT with raw values to initial registers with.

Line lengths should be <80 char.

> +- qcom,aux-cfg1-settings:		Specifies the DP AUX configuration 1 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg2-settings:		Specifies the DP AUX configuration 2 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg3-settings:		Specifies the DP AUX configuration 3 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg4-settings:		Specifies the DP AUX configuration 4 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg5-settings:		Specifies the DP AUX configuration 5 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg6-settings:		Specifies the DP AUX configuration 6 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg7-settings:		Specifies the DP AUX configuration 7 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg8-settings:		Specifies the DP AUX configuration 8 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg9-settings:		Specifies the DP AUX configuration 9 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,max-pclk-frequency-khz:	An integer specifying the maximum. pixel clock in KHz supported by Display Port.

Wrap your lines.

> +- extcon:				Phandle for the external connector class interface.

Don't use extcon. Either dp-connector or usb-connector binding instead.

> +- qcom,<type>-supply-entries:		A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
> +					can be "core", "ctrl", and "phy". Within the same type,
> +					there can be more than one instance of this binding,
> +					in which case the entry would be appended with the
> +					supply entry index.
> +					e.g. qcom,ctrl-supply-entry@0
> +					-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
> +					-- qcom,supply-min-voltage: minimum voltage level (uV)
> +					-- qcom,supply-max-voltage: maximum voltage level (uV)
> +					-- qcom,supply-enable-load: load drawn (uA) from enabled supply
> +					-- qcom,supply-disable-load: load drawn (uA) from disabled supply
> +					-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
> +					-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
> +					-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
> +					-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off

Not sure what you're trying to do here, but looks like the regulator 
binding should be used.

> +- pinctrl-names:	List of names to assign mdss pin states defined in pinctrl device node
> +					Refer to pinctrl-bindings.txt
> +- pinctrl-<0..n>:	Lists phandles each pointing to the pin configuration node within a pin
> +					controller. These pin configurations are installed in the pinctrl
> +					device node. Refer to pinctrl-bindings.txt
> +DP Endpoint properties:
> +  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
> +    input endpoint. For port@1, set to the DPU interface output. See [2] for
> +    device graph info.
> +
> +Optional properties:
> +- qcom,aux-en-gpio:		Specifies the aux-channel enable gpio.
> +- qcom,aux-sel-gpio:		Specifies the mux-selection that might be needed for aux interface.

-gpios is the preferred form.

> +
> +
> +DP PLL: Required properties:

Should be a separate doc.

> +- compatible:           Should be "qcom,dp-pll-10nm".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the PLL instance.
> +- reg-names:            A list of strings that name the list of regs.
> +			"pll_base" - DP PLL memory region.
> +			"phy_base" - DP PHY memory region.
> +			"ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
> +			"ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
> +			"gdsc_base" - gdsc memory region.
> +- interrupt-parent	phandle to the interrupt parent device node.
> +- interrupts:		The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +			"iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
> +- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value			     is set to zero so that minimum clock value is configured. Non-zero clock
> +			value can be used to configure DP pixel clock.
> +
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/graph.txt
> +
> +Example:
> +	msm_dp: dp_display@ae90000{
> +		cell-index = <0>;
> +		compatible = "qcom,dp-display";
> +
> +		reg =   <0 0x90000 0x0dc>,
> +			<0 0x90200 0x0c0>,
> +			<0 0x90400 0x508>,
> +			<0 0x90a00 0x094>,
> +			<1 0xeaa00 0x200>,
> +			<1 0xea200 0x200>,
> +			<1 0xea600 0x200>,
> +			<2 0x02000 0x1a0>,
> +			<3 0x00000 0x621c>,
> +			<1 0xea000 0x180>,
> +			<1 0xe8000 0x20>,
> +			<4 0xe1000 0x034>;
> +		reg-names = "dp_ahb", "dp_aux", "dp_link",
> +			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
> +			"dp_mmss_cc", "qfprom_physical", "dp_pll",
> +			"usb3_dp_com", "hdcp_physical";
> +
> +		interrupt-parent = <&mdss>;
> +		interrupts = <12 0>;
> +
> +		extcon = <&usb_1_ssphy>;
> +		clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +			<&rpmhcc RPMH_CXO_CLK>,
> +			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +			<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +		clock-names = "core_aux_clk", "core_ref_clk_src",
> +			"core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +			"core_usb_pipe_clk", "ctrl_link_clk",
> +			"ctrl_link_iface_clk", "ctrl_pixel_clk",
> +			"crypto_clk", "pixel_clk_rcg";
> +
> +		pll-node = <&dp_pll>;
> +		qcom,aux-cfg0-settings = [20 00];
> +		qcom,aux-cfg1-settings = [24 13 23 1d];
> +		qcom,aux-cfg2-settings = [28 24];
> +		qcom,aux-cfg3-settings = [2c 00];
> +		qcom,aux-cfg4-settings = [30 0a];
> +		qcom,aux-cfg5-settings = [34 26];
> +		qcom,aux-cfg6-settings = [38 0a];
> +		qcom,aux-cfg7-settings = [3c 03];
> +		qcom,aux-cfg8-settings = [40 bb];
> +		qcom,aux-cfg9-settings = [44 03];
> +
> +		qcom,max-pclk-frequency-khz = <675000>;
> +
> +		qcom,ctrl-supply-entries {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			qcom,ctrl-supply-entry@0 {
> +				reg = <0>;
> +				qcom,supply-name = "vdda-1p2";
> +				qcom,supply-min-voltage = <1200000>;
> +				qcom,supply-max-voltage = <1200000>;
> +				qcom,supply-enable-load = <21800>;
> +				qcom,supply-disable-load = <4>;
> +			};
> +		};
> +
> +		qcom,phy-supply-entries {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			qcom,phy-supply-entry@0 {
> +				reg = <0>;
> +				qcom,supply-name = "vdda-0p9";
> +				qcom,supply-min-voltage = <880000>;
> +				qcom,supply-max-voltage = <880000>;
> +				qcom,supply-enable-load = <36000>;
> +				qcom,supply-disable-load = <32>;
> +			};
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				dp_in: endpoint {
> +					remote-endpoint = <&dpu_intf0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				dp_out: endpoint {
> +				};
> +			};
> +		};
> +	};
> +
> +	dp_pll: dp-pll@c011000 {
> +		compatible = "qcom,dp-pll-10nm";
> +		label = "DP PLL";
> +		cell-index = <0>;
> +		#clock-cells = <1>;
> +
> +		reg = <1 0xea000 0x200>,
> +		      <1 0xeaa00 0x200>,
> +		      <1 0xea200 0x200>,
> +		      <1 0xea600 0x200>,
> +		      <2 0x03000 0x8>;
> +		reg-names = "pll_base", "phy_base", "ln_tx0_base",
> +			"ln_tx1_base", "gdsc_base";
> +
> +		clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +			 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +			 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +		clock-names = "iface_clk", "ref_clk",
> +			"cfg_ahb_clk", "pipe_clk";
> +		clock-rate = <0>;
> +
> +	};
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index a61dd40..eac6e1c 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -63,8 +63,9 @@ Required properties:
>  	Documentation/devicetree/bindings/graph.txt
>  	Documentation/devicetree/bindings/media/video-interfaces.txt
>  
> -	Port 0 -> DPU_INTF1 (DSI1)
> -	Port 1 -> DPU_INTF2 (DSI2)
> +	Port 0 -> DPU_INTF0 (DP)
> +	Port 1 -> DPU_INTF1 (DSI1)
> +	Port 2 -> DPU_INTF2 (DSI2)

No, you can't redefine existing binding.

>  
>  Optional properties:
>  - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -125,13 +126,20 @@ Example:
>  
>  				port@0 {
>  					reg = <0>;
> -					dpu_intf1_out: endpoint {
> -						remote-endpoint = <&dsi0_in>;
> +					dpu_intf0_out: endpoint {
> +						remote-endpoint = <&dp_in>;
>  					};
>  				};
>  
>  				port@1 {
>  					reg = <1>;
> +					dpu_intf1_out: endpoint {
> +						remote-endpoint = <&dsi0_in>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
>  					dpu_intf2_out: endpoint {
>  						remote-endpoint = <&dsi1_in>;
>  					};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Rob Herring]

On Mon, Dec 02, 2019 at 01:47:45PM +0000, Chandan Uddaraju wrote:
> Add bindings for Snapdragon 845 DisplayPort and
> display-port PLL driver.

Is it just me, but I keep getting 2 copies of codeaurora emails?

> 
> Changes in V2:
> Provide details about sel-gpio

This is V3, what changed in V3?

> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
>  2 files changed, 261 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt

New bindings should be in DT schema format.

> diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
> new file mode 100644
> index 0000000..38be36d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp.txt
> @@ -0,0 +1,249 @@
> +Qualcomm Technologies, Inc.
> +DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
> +DP Controller: Required properties:
> +- compatible:           Should be "qcom,dp-display".

Needs to be more specific like including the SoC name.

> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the controller instance.

FDT doesn't use cell-index.

> +- reg-names:            A list of strings that name the list of regs.
> +			"dp_ahb" - DP controller memory region.
> +			"dp_aux" - DP AUX memory region.
> +			"dp_link" - DP link layer memory region.
> +			"dp_p0" - DP pixel clock domain memory region.
> +			"dp_phy" - DP PHY memory region.
> +			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
> +			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
> +			"dp_mmss_cc" - Display Clock Control memory region.

Sounds like a separate clock controller node...

> +			"qfprom_physical" - QFPROM Phys memory region.
> +			"dp_pll" - USB3 DP combo PLL memory region.
> +			"usb3_dp_com" - USB3 DP PHY combo memory region.

Should be a separate phy node?

> +			"hdcp_physical" - DP HDCP memory region.

The 'dp_' part is redundant.

What does 'physical' mean? Addresses in DT are always physical.

> +- interrupt-parent	phandle to the interrupt parent device node.

Don't document interrupt-parent. It's not required either because it 
could be in a parent node.

> +- interrupts:		The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +			"core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +			"core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
> +			"ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".

Clocks should be actual clock inputs to the module. If 'pixel_parent' is 
just some parent clock you want to assign, then use assigned-clocks.

> +- pll-node:		phandle to DP PLL node.

But you have a DP PLL reg region defined. Is this something else?

Needs a 'qcom' prefix if it stays.

> +- vdda-1p2-supply:		phandle to vdda 1.2V regulator node.
> +- vdda-0p9-supply:		phandle to vdda 0.9V regulator node.
> +- qcom,aux-cfg0-settings:		Specifies the DP AUX configuration 0 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.

Needs more details on what these are and why they must be in DT. We 
generally don't just stuff DT with raw values to initial registers with.

Line lengths should be <80 char.

> +- qcom,aux-cfg1-settings:		Specifies the DP AUX configuration 1 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg2-settings:		Specifies the DP AUX configuration 2 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg3-settings:		Specifies the DP AUX configuration 3 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg4-settings:		Specifies the DP AUX configuration 4 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg5-settings:		Specifies the DP AUX configuration 5 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg6-settings:		Specifies the DP AUX configuration 6 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg7-settings:		Specifies the DP AUX configuration 7 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg8-settings:		Specifies the DP AUX configuration 8 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,aux-cfg9-settings:		Specifies the DP AUX configuration 9 settings. The first
> +					entry in this array corresponds to the register offset
> +					within DP AUX, while the remaining entries indicate the
> +					programmable values.
> +- qcom,max-pclk-frequency-khz:	An integer specifying the maximum. pixel clock in KHz supported by Display Port.

Wrap your lines.

> +- extcon:				Phandle for the external connector class interface.

Don't use extcon. Either dp-connector or usb-connector binding instead.

> +- qcom,<type>-supply-entries:		A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
> +					can be "core", "ctrl", and "phy". Within the same type,
> +					there can be more than one instance of this binding,
> +					in which case the entry would be appended with the
> +					supply entry index.
> +					e.g. qcom,ctrl-supply-entry@0
> +					-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
> +					-- qcom,supply-min-voltage: minimum voltage level (uV)
> +					-- qcom,supply-max-voltage: maximum voltage level (uV)
> +					-- qcom,supply-enable-load: load drawn (uA) from enabled supply
> +					-- qcom,supply-disable-load: load drawn (uA) from disabled supply
> +					-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
> +					-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
> +					-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
> +					-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off

Not sure what you're trying to do here, but looks like the regulator 
binding should be used.

> +- pinctrl-names:	List of names to assign mdss pin states defined in pinctrl device node
> +					Refer to pinctrl-bindings.txt
> +- pinctrl-<0..n>:	Lists phandles each pointing to the pin configuration node within a pin
> +					controller. These pin configurations are installed in the pinctrl
> +					device node. Refer to pinctrl-bindings.txt
> +DP Endpoint properties:
> +  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
> +    input endpoint. For port@1, set to the DPU interface output. See [2] for
> +    device graph info.
> +
> +Optional properties:
> +- qcom,aux-en-gpio:		Specifies the aux-channel enable gpio.
> +- qcom,aux-sel-gpio:		Specifies the mux-selection that might be needed for aux interface.

-gpios is the preferred form.

> +
> +
> +DP PLL: Required properties:

Should be a separate doc.

> +- compatible:           Should be "qcom,dp-pll-10nm".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the PLL instance.
> +- reg-names:            A list of strings that name the list of regs.
> +			"pll_base" - DP PLL memory region.
> +			"phy_base" - DP PHY memory region.
> +			"ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
> +			"ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
> +			"gdsc_base" - gdsc memory region.
> +- interrupt-parent	phandle to the interrupt parent device node.
> +- interrupts:		The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +			"iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
> +- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value			     is set to zero so that minimum clock value is configured. Non-zero clock
> +			value can be used to configure DP pixel clock.
> +
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/graph.txt
> +
> +Example:
> +	msm_dp: dp_display@ae90000{
> +		cell-index = <0>;
> +		compatible = "qcom,dp-display";
> +
> +		reg =   <0 0x90000 0x0dc>,
> +			<0 0x90200 0x0c0>,
> +			<0 0x90400 0x508>,
> +			<0 0x90a00 0x094>,
> +			<1 0xeaa00 0x200>,
> +			<1 0xea200 0x200>,
> +			<1 0xea600 0x200>,
> +			<2 0x02000 0x1a0>,
> +			<3 0x00000 0x621c>,
> +			<1 0xea000 0x180>,
> +			<1 0xe8000 0x20>,
> +			<4 0xe1000 0x034>;
> +		reg-names = "dp_ahb", "dp_aux", "dp_link",
> +			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
> +			"dp_mmss_cc", "qfprom_physical", "dp_pll",
> +			"usb3_dp_com", "hdcp_physical";
> +
> +		interrupt-parent = <&mdss>;
> +		interrupts = <12 0>;
> +
> +		extcon = <&usb_1_ssphy>;
> +		clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +			<&rpmhcc RPMH_CXO_CLK>,
> +			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +			<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
> +			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +		clock-names = "core_aux_clk", "core_ref_clk_src",
> +			"core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +			"core_usb_pipe_clk", "ctrl_link_clk",
> +			"ctrl_link_iface_clk", "ctrl_pixel_clk",
> +			"crypto_clk", "pixel_clk_rcg";
> +
> +		pll-node = <&dp_pll>;
> +		qcom,aux-cfg0-settings = [20 00];
> +		qcom,aux-cfg1-settings = [24 13 23 1d];
> +		qcom,aux-cfg2-settings = [28 24];
> +		qcom,aux-cfg3-settings = [2c 00];
> +		qcom,aux-cfg4-settings = [30 0a];
> +		qcom,aux-cfg5-settings = [34 26];
> +		qcom,aux-cfg6-settings = [38 0a];
> +		qcom,aux-cfg7-settings = [3c 03];
> +		qcom,aux-cfg8-settings = [40 bb];
> +		qcom,aux-cfg9-settings = [44 03];
> +
> +		qcom,max-pclk-frequency-khz = <675000>;
> +
> +		qcom,ctrl-supply-entries {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			qcom,ctrl-supply-entry@0 {
> +				reg = <0>;
> +				qcom,supply-name = "vdda-1p2";
> +				qcom,supply-min-voltage = <1200000>;
> +				qcom,supply-max-voltage = <1200000>;
> +				qcom,supply-enable-load = <21800>;
> +				qcom,supply-disable-load = <4>;
> +			};
> +		};
> +
> +		qcom,phy-supply-entries {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			qcom,phy-supply-entry@0 {
> +				reg = <0>;
> +				qcom,supply-name = "vdda-0p9";
> +				qcom,supply-min-voltage = <880000>;
> +				qcom,supply-max-voltage = <880000>;
> +				qcom,supply-enable-load = <36000>;
> +				qcom,supply-disable-load = <32>;
> +			};
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				dp_in: endpoint {
> +					remote-endpoint = <&dpu_intf0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				dp_out: endpoint {
> +				};
> +			};
> +		};
> +	};
> +
> +	dp_pll: dp-pll@c011000 {
> +		compatible = "qcom,dp-pll-10nm";
> +		label = "DP PLL";
> +		cell-index = <0>;
> +		#clock-cells = <1>;
> +
> +		reg = <1 0xea000 0x200>,
> +		      <1 0xeaa00 0x200>,
> +		      <1 0xea200 0x200>,
> +		      <1 0xea600 0x200>,
> +		      <2 0x03000 0x8>;
> +		reg-names = "pll_base", "phy_base", "ln_tx0_base",
> +			"ln_tx1_base", "gdsc_base";
> +
> +		clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +			 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +			 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +		clock-names = "iface_clk", "ref_clk",
> +			"cfg_ahb_clk", "pipe_clk";
> +		clock-rate = <0>;
> +
> +	};
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index a61dd40..eac6e1c 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -63,8 +63,9 @@ Required properties:
>  	Documentation/devicetree/bindings/graph.txt
>  	Documentation/devicetree/bindings/media/video-interfaces.txt
>  
> -	Port 0 -> DPU_INTF1 (DSI1)
> -	Port 1 -> DPU_INTF2 (DSI2)
> +	Port 0 -> DPU_INTF0 (DP)
> +	Port 1 -> DPU_INTF1 (DSI1)
> +	Port 2 -> DPU_INTF2 (DSI2)

No, you can't redefine existing binding.

>  
>  Optional properties:
>  - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -125,13 +126,20 @@ Example:
>  
>  				port@0 {
>  					reg = <0>;
> -					dpu_intf1_out: endpoint {
> -						remote-endpoint = <&dsi0_in>;
> +					dpu_intf0_out: endpoint {
> +						remote-endpoint = <&dp_in>;
>  					};
>  				};
>  
>  				port@1 {
>  					reg = <1>;
> +					dpu_intf1_out: endpoint {
> +						remote-endpoint = <&dsi0_in>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
>  					dpu_intf2_out: endpoint {
>  						remote-endpoint = <&dsi1_in>;
>  					};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Jeffrey Hugo]

On Mon, Dec 2, 2019 at 6:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add bindings for Snapdragon 845 DisplayPort and
> display-port PLL driver.
>
> Changes in V2:
> Provide details about sel-gpio
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
>  2 files changed, 261 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
> new file mode 100644
> index 0000000..38be36d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp.txt
> @@ -0,0 +1,249 @@
> +Qualcomm Technologies, Inc.
> +DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
> +DP Controller: Required properties:
> +- compatible:           Should be "qcom,dp-display".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the controller instance.
> +- reg-names:            A list of strings that name the list of regs.
> +                       "dp_ahb" - DP controller memory region.
> +                       "dp_aux" - DP AUX memory region.
> +                       "dp_link" - DP link layer memory region.
> +                       "dp_p0" - DP pixel clock domain memory region.
> +                       "dp_phy" - DP PHY memory region.
> +                       "dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
> +                       "dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
> +                       "dp_mmss_cc" - Display Clock Control memory region.
> +                       "qfprom_physical" - QFPROM Phys memory region.
> +                       "dp_pll" - USB3 DP combo PLL memory region.
> +                       "usb3_dp_com" - USB3 DP PHY combo memory region.
> +                       "hdcp_physical" - DP HDCP memory region.
> +- interrupt-parent     phandle to the interrupt parent device node.
> +- interrupts:          The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +                       "core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +                       "core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
> +                       "ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".
> +- pll-node:            phandle to DP PLL node.
> +- vdda-1p2-supply:             phandle to vdda 1.2V regulator node.
> +- vdda-0p9-supply:             phandle to vdda 0.9V regulator node.
> +- qcom,aux-cfg0-settings:              Specifies the DP AUX configuration 0 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg1-settings:              Specifies the DP AUX configuration 1 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg2-settings:              Specifies the DP AUX configuration 2 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg3-settings:              Specifies the DP AUX configuration 3 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg4-settings:              Specifies the DP AUX configuration 4 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg5-settings:              Specifies the DP AUX configuration 5 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg6-settings:              Specifies the DP AUX configuration 6 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg7-settings:              Specifies the DP AUX configuration 7 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg8-settings:              Specifies the DP AUX configuration 8 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg9-settings:              Specifies the DP AUX configuration 9 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,max-pclk-frequency-khz: An integer specifying the maximum. pixel clock in KHz supported by Display Port.
> +- extcon:                              Phandle for the external connector class interface.
> +- qcom,<type>-supply-entries:          A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
> +                                       can be "core", "ctrl", and "phy". Within the same type,
> +                                       there can be more than one instance of this binding,
> +                                       in which case the entry would be appended with the
> +                                       supply entry index.
> +                                       e.g. qcom,ctrl-supply-entry@0
> +                                       -- qcom,supply-name: name of the supply (vdd/vdda/vddio)
> +                                       -- qcom,supply-min-voltage: minimum voltage level (uV)
> +                                       -- qcom,supply-max-voltage: maximum voltage level (uV)
> +                                       -- qcom,supply-enable-load: load drawn (uA) from enabled supply
> +                                       -- qcom,supply-disable-load: load drawn (uA) from disabled supply
> +                                       -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
> +                                       -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
> +                                       -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
> +                                       -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
> +- pinctrl-names:       List of names to assign mdss pin states defined in pinctrl device node
> +                                       Refer to pinctrl-bindings.txt
> +- pinctrl-<0..n>:      Lists phandles each pointing to the pin configuration node within a pin
> +                                       controller. These pin configurations are installed in the pinctrl
> +                                       device node. Refer to pinctrl-bindings.txt
> +DP Endpoint properties:
> +  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
> +    input endpoint. For port@1, set to the DPU interface output. See [2] for
> +    device graph info.
> +
> +Optional properties:
> +- qcom,aux-en-gpio:            Specifies the aux-channel enable gpio.
> +- qcom,aux-sel-gpio:           Specifies the mux-selection that might be needed for aux interface.
> +
> +
> +DP PLL: Required properties:
> +- compatible:           Should be "qcom,dp-pll-10nm".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the PLL instance.
> +- reg-names:            A list of strings that name the list of regs.
> +                       "pll_base" - DP PLL memory region.
> +                       "phy_base" - DP PHY memory region.
> +                       "ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
> +                       "ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
> +                       "gdsc_base" - gdsc memory region.
> +- interrupt-parent     phandle to the interrupt parent device node.
> +- interrupts:          The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +                       "iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
> +- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value                       is set to zero so that minimum clock value is configured. Non-zero clock
> +                       value can be used to configure DP pixel clock.

This should be a clock provider, no?

> +
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/graph.txt
> +
> +Example:
> +       msm_dp: dp_display@ae90000{
> +               cell-index = <0>;
> +               compatible = "qcom,dp-display";
> +
> +               reg =   <0 0x90000 0x0dc>,
> +                       <0 0x90200 0x0c0>,
> +                       <0 0x90400 0x508>,
> +                       <0 0x90a00 0x094>,
> +                       <1 0xeaa00 0x200>,
> +                       <1 0xea200 0x200>,
> +                       <1 0xea600 0x200>,
> +                       <2 0x02000 0x1a0>,
> +                       <3 0x00000 0x621c>,
> +                       <1 0xea000 0x180>,
> +                       <1 0xe8000 0x20>,
> +                       <4 0xe1000 0x034>;
> +               reg-names = "dp_ahb", "dp_aux", "dp_link",
> +                       "dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
> +                       "dp_mmss_cc", "qfprom_physical", "dp_pll",
> +                       "usb3_dp_com", "hdcp_physical";
> +
> +               interrupt-parent = <&mdss>;
> +               interrupts = <12 0>;
> +
> +               extcon = <&usb_1_ssphy>;
> +               clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +                       <&rpmhcc RPMH_CXO_CLK>,
> +                       <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                       <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                       <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +               clock-names = "core_aux_clk", "core_ref_clk_src",
> +                       "core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +                       "core_usb_pipe_clk", "ctrl_link_clk",
> +                       "ctrl_link_iface_clk", "ctrl_pixel_clk",
> +                       "crypto_clk", "pixel_clk_rcg";
> +
> +               pll-node = <&dp_pll>;
> +               qcom,aux-cfg0-settings = [20 00];
> +               qcom,aux-cfg1-settings = [24 13 23 1d];
> +               qcom,aux-cfg2-settings = [28 24];
> +               qcom,aux-cfg3-settings = [2c 00];
> +               qcom,aux-cfg4-settings = [30 0a];
> +               qcom,aux-cfg5-settings = [34 26];
> +               qcom,aux-cfg6-settings = [38 0a];
> +               qcom,aux-cfg7-settings = [3c 03];
> +               qcom,aux-cfg8-settings = [40 bb];
> +               qcom,aux-cfg9-settings = [44 03];
> +
> +               qcom,max-pclk-frequency-khz = <675000>;
> +
> +               qcom,ctrl-supply-entries {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       qcom,ctrl-supply-entry@0 {
> +                               reg = <0>;
> +                               qcom,supply-name = "vdda-1p2";
> +                               qcom,supply-min-voltage = <1200000>;
> +                               qcom,supply-max-voltage = <1200000>;
> +                               qcom,supply-enable-load = <21800>;
> +                               qcom,supply-disable-load = <4>;
> +                       };
> +               };
> +
> +               qcom,phy-supply-entries {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       qcom,phy-supply-entry@0 {
> +                               reg = <0>;
> +                               qcom,supply-name = "vdda-0p9";
> +                               qcom,supply-min-voltage = <880000>;
> +                               qcom,supply-max-voltage = <880000>;
> +                               qcom,supply-enable-load = <36000>;
> +                               qcom,supply-disable-load = <32>;
> +                       };
> +               };
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +                               dp_in: endpoint {
> +                                       remote-endpoint = <&dpu_intf0_out>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +                               dp_out: endpoint {
> +                               };
> +                       };
> +               };
> +       };
> +
> +       dp_pll: dp-pll@c011000 {
> +               compatible = "qcom,dp-pll-10nm";
> +               label = "DP PLL";
> +               cell-index = <0>;
> +               #clock-cells = <1>;
> +
> +               reg = <1 0xea000 0x200>,
> +                     <1 0xeaa00 0x200>,
> +                     <1 0xea200 0x200>,
> +                     <1 0xea600 0x200>,
> +                     <2 0x03000 0x8>;
> +               reg-names = "pll_base", "phy_base", "ln_tx0_base",
> +                       "ln_tx1_base", "gdsc_base";
> +
> +               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                        <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                        <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                        <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +               clock-names = "iface_clk", "ref_clk",
> +                       "cfg_ahb_clk", "pipe_clk";
> +               clock-rate = <0>;
> +
> +       };
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index a61dd40..eac6e1c 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -63,8 +63,9 @@ Required properties:
>         Documentation/devicetree/bindings/graph.txt
>         Documentation/devicetree/bindings/media/video-interfaces.txt
>
> -       Port 0 -> DPU_INTF1 (DSI1)
> -       Port 1 -> DPU_INTF2 (DSI2)
> +       Port 0 -> DPU_INTF0 (DP)
> +       Port 1 -> DPU_INTF1 (DSI1)
> +       Port 2 -> DPU_INTF2 (DSI2)
>
>  Optional properties:
>  - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -125,13 +126,20 @@ Example:
>
>                                 port@0 {
>                                         reg = <0>;
> -                                       dpu_intf1_out: endpoint {
> -                                               remote-endpoint = <&dsi0_in>;
> +                                       dpu_intf0_out: endpoint {
> +                                               remote-endpoint = <&dp_in>;
>                                         };
>                                 };
>
>                                 port@1 {
>                                         reg = <1>;
> +                                       dpu_intf1_out: endpoint {
> +                                               remote-endpoint = <&dsi0_in>;
> +                                       };
> +                               };
> +
> +                               port@2 {
> +                                       reg = <2>;
>                                         dpu_intf2_out: endpoint {
>                                                 remote-endpoint = <&dsi1_in>;
>                                         };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

Re: [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Jeffrey Hugo]

On Mon, Dec 2, 2019 at 6:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add bindings for Snapdragon 845 DisplayPort and
> display-port PLL driver.
>
> Changes in V2:
> Provide details about sel-gpio
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
>  2 files changed, 261 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
> new file mode 100644
> index 0000000..38be36d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp.txt
> @@ -0,0 +1,249 @@
> +Qualcomm Technologies, Inc.
> +DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
> +DP Controller: Required properties:
> +- compatible:           Should be "qcom,dp-display".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the controller instance.
> +- reg-names:            A list of strings that name the list of regs.
> +                       "dp_ahb" - DP controller memory region.
> +                       "dp_aux" - DP AUX memory region.
> +                       "dp_link" - DP link layer memory region.
> +                       "dp_p0" - DP pixel clock domain memory region.
> +                       "dp_phy" - DP PHY memory region.
> +                       "dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
> +                       "dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
> +                       "dp_mmss_cc" - Display Clock Control memory region.
> +                       "qfprom_physical" - QFPROM Phys memory region.
> +                       "dp_pll" - USB3 DP combo PLL memory region.
> +                       "usb3_dp_com" - USB3 DP PHY combo memory region.
> +                       "hdcp_physical" - DP HDCP memory region.
> +- interrupt-parent     phandle to the interrupt parent device node.
> +- interrupts:          The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +                       "core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +                       "core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
> +                       "ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".
> +- pll-node:            phandle to DP PLL node.
> +- vdda-1p2-supply:             phandle to vdda 1.2V regulator node.
> +- vdda-0p9-supply:             phandle to vdda 0.9V regulator node.
> +- qcom,aux-cfg0-settings:              Specifies the DP AUX configuration 0 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg1-settings:              Specifies the DP AUX configuration 1 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg2-settings:              Specifies the DP AUX configuration 2 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg3-settings:              Specifies the DP AUX configuration 3 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg4-settings:              Specifies the DP AUX configuration 4 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg5-settings:              Specifies the DP AUX configuration 5 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg6-settings:              Specifies the DP AUX configuration 6 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg7-settings:              Specifies the DP AUX configuration 7 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg8-settings:              Specifies the DP AUX configuration 8 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,aux-cfg9-settings:              Specifies the DP AUX configuration 9 settings. The first
> +                                       entry in this array corresponds to the register offset
> +                                       within DP AUX, while the remaining entries indicate the
> +                                       programmable values.
> +- qcom,max-pclk-frequency-khz: An integer specifying the maximum. pixel clock in KHz supported by Display Port.
> +- extcon:                              Phandle for the external connector class interface.
> +- qcom,<type>-supply-entries:          A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
> +                                       can be "core", "ctrl", and "phy". Within the same type,
> +                                       there can be more than one instance of this binding,
> +                                       in which case the entry would be appended with the
> +                                       supply entry index.
> +                                       e.g. qcom,ctrl-supply-entry@0
> +                                       -- qcom,supply-name: name of the supply (vdd/vdda/vddio)
> +                                       -- qcom,supply-min-voltage: minimum voltage level (uV)
> +                                       -- qcom,supply-max-voltage: maximum voltage level (uV)
> +                                       -- qcom,supply-enable-load: load drawn (uA) from enabled supply
> +                                       -- qcom,supply-disable-load: load drawn (uA) from disabled supply
> +                                       -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
> +                                       -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
> +                                       -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
> +                                       -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
> +- pinctrl-names:       List of names to assign mdss pin states defined in pinctrl device node
> +                                       Refer to pinctrl-bindings.txt
> +- pinctrl-<0..n>:      Lists phandles each pointing to the pin configuration node within a pin
> +                                       controller. These pin configurations are installed in the pinctrl
> +                                       device node. Refer to pinctrl-bindings.txt
> +DP Endpoint properties:
> +  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
> +    input endpoint. For port@1, set to the DPU interface output. See [2] for
> +    device graph info.
> +
> +Optional properties:
> +- qcom,aux-en-gpio:            Specifies the aux-channel enable gpio.
> +- qcom,aux-sel-gpio:           Specifies the mux-selection that might be needed for aux interface.
> +
> +
> +DP PLL: Required properties:
> +- compatible:           Should be "qcom,dp-pll-10nm".
> +- reg:                  Base address and length of DP hardware's memory mapped regions.
> +- cell-index:           Specifies the PLL instance.
> +- reg-names:            A list of strings that name the list of regs.
> +                       "pll_base" - DP PLL memory region.
> +                       "phy_base" - DP PHY memory region.
> +                       "ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
> +                       "ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
> +                       "gdsc_base" - gdsc memory region.
> +- interrupt-parent     phandle to the interrupt parent device node.
> +- interrupts:          The interrupt signal from the DP block.
> +- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
> +- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
> +                       "iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
> +- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value                       is set to zero so that minimum clock value is configured. Non-zero clock
> +                       value can be used to configure DP pixel clock.

This should be a clock provider, no?

> +
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/graph.txt
> +
> +Example:
> +       msm_dp: dp_display@ae90000{
> +               cell-index = <0>;
> +               compatible = "qcom,dp-display";
> +
> +               reg =   <0 0x90000 0x0dc>,
> +                       <0 0x90200 0x0c0>,
> +                       <0 0x90400 0x508>,
> +                       <0 0x90a00 0x094>,
> +                       <1 0xeaa00 0x200>,
> +                       <1 0xea200 0x200>,
> +                       <1 0xea600 0x200>,
> +                       <2 0x02000 0x1a0>,
> +                       <3 0x00000 0x621c>,
> +                       <1 0xea000 0x180>,
> +                       <1 0xe8000 0x20>,
> +                       <4 0xe1000 0x034>;
> +               reg-names = "dp_ahb", "dp_aux", "dp_link",
> +                       "dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
> +                       "dp_mmss_cc", "qfprom_physical", "dp_pll",
> +                       "usb3_dp_com", "hdcp_physical";
> +
> +               interrupt-parent = <&mdss>;
> +               interrupts = <12 0>;
> +
> +               extcon = <&usb_1_ssphy>;
> +               clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +                       <&rpmhcc RPMH_CXO_CLK>,
> +                       <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                       <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                       <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
> +                       <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +               clock-names = "core_aux_clk", "core_ref_clk_src",
> +                       "core_usb_ref_clk", "core_usb_cfg_ahb_clk",
> +                       "core_usb_pipe_clk", "ctrl_link_clk",
> +                       "ctrl_link_iface_clk", "ctrl_pixel_clk",
> +                       "crypto_clk", "pixel_clk_rcg";
> +
> +               pll-node = <&dp_pll>;
> +               qcom,aux-cfg0-settings = [20 00];
> +               qcom,aux-cfg1-settings = [24 13 23 1d];
> +               qcom,aux-cfg2-settings = [28 24];
> +               qcom,aux-cfg3-settings = [2c 00];
> +               qcom,aux-cfg4-settings = [30 0a];
> +               qcom,aux-cfg5-settings = [34 26];
> +               qcom,aux-cfg6-settings = [38 0a];
> +               qcom,aux-cfg7-settings = [3c 03];
> +               qcom,aux-cfg8-settings = [40 bb];
> +               qcom,aux-cfg9-settings = [44 03];
> +
> +               qcom,max-pclk-frequency-khz = <675000>;
> +
> +               qcom,ctrl-supply-entries {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       qcom,ctrl-supply-entry@0 {
> +                               reg = <0>;
> +                               qcom,supply-name = "vdda-1p2";
> +                               qcom,supply-min-voltage = <1200000>;
> +                               qcom,supply-max-voltage = <1200000>;
> +                               qcom,supply-enable-load = <21800>;
> +                               qcom,supply-disable-load = <4>;
> +                       };
> +               };
> +
> +               qcom,phy-supply-entries {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       qcom,phy-supply-entry@0 {
> +                               reg = <0>;
> +                               qcom,supply-name = "vdda-0p9";
> +                               qcom,supply-min-voltage = <880000>;
> +                               qcom,supply-max-voltage = <880000>;
> +                               qcom,supply-enable-load = <36000>;
> +                               qcom,supply-disable-load = <32>;
> +                       };
> +               };
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +                               dp_in: endpoint {
> +                                       remote-endpoint = <&dpu_intf0_out>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +                               dp_out: endpoint {
> +                               };
> +                       };
> +               };
> +       };
> +
> +       dp_pll: dp-pll@c011000 {
> +               compatible = "qcom,dp-pll-10nm";
> +               label = "DP PLL";
> +               cell-index = <0>;
> +               #clock-cells = <1>;
> +
> +               reg = <1 0xea000 0x200>,
> +                     <1 0xeaa00 0x200>,
> +                     <1 0xea200 0x200>,
> +                     <1 0xea600 0x200>,
> +                     <2 0x03000 0x8>;
> +               reg-names = "pll_base", "phy_base", "ln_tx0_base",
> +                       "ln_tx1_base", "gdsc_base";
> +
> +               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                        <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                        <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                        <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +               clock-names = "iface_clk", "ref_clk",
> +                       "cfg_ahb_clk", "pipe_clk";
> +               clock-rate = <0>;
> +
> +       };
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index a61dd40..eac6e1c 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -63,8 +63,9 @@ Required properties:
>         Documentation/devicetree/bindings/graph.txt
>         Documentation/devicetree/bindings/media/video-interfaces.txt
>
> -       Port 0 -> DPU_INTF1 (DSI1)
> -       Port 1 -> DPU_INTF2 (DSI2)
> +       Port 0 -> DPU_INTF0 (DP)
> +       Port 1 -> DPU_INTF1 (DSI1)
> +       Port 2 -> DPU_INTF2 (DSI2)
>
>  Optional properties:
>  - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -125,13 +126,20 @@ Example:
>
>                                 port@0 {
>                                         reg = <0>;
> -                                       dpu_intf1_out: endpoint {
> -                                               remote-endpoint = <&dsi0_in>;
> +                                       dpu_intf0_out: endpoint {
> +                                               remote-endpoint = <&dp_in>;
>                                         };
>                                 };
>
>                                 port@1 {
>                                         reg = <1>;
> +                                       dpu_intf1_out: endpoint {
> +                                               remote-endpoint = <&dsi0_in>;
> +                                       };
> +                               };
> +
> +                               port@2 {
> +                                       reg = <2>;
>                                         dpu_intf2_out: endpoint {
>                                                 remote-endpoint = <&dsi1_in>;
>                                         };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Chandan Uddaraju]

Add the needed displayPort files to enable DP driver
on msm target.

"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.

changes in v2:
-- Update copyright markings on all relevant files.
-- Change pr_err() to DRM_ERROR()
-- Use APIs directly instead of function pointers.
-- Use drm_display_mode structure to store link parameters in the driver.
-- Use macros for register definitions instead of hardcoded values.
-- Replace writel_relaxed/readl_relaxed with writel/readl
   and remove memory barriers.
-- Remove unnecessary NULL checks.
-- Use drm helper functions for dpcd read/write.
-- Use DRM_DEBUG_DP for debug msgs.

changes in V3:
-- Removed changes in dpu_io_util.[ch]
-- Added locking around "is_connected" flag and removed atomic_set()
-- Removed the argument validation checks in all the static functions
   except initialization functions and few API calls across msm/dp files
-- Removed hardcoded values for register reads/writes
-- Removed vreg related generic structures.
-- Added return values where ever necessary.
-- Updated dp_ctrl_on function.
-- Calling the ctrl specific catalog functions directly instead of
   function pointers.
-- Added seperate change that adds standard value in drm_dp_helper file.
-- Added separate change in this list that is used to initialize
   displayport in DPU driver.
-- Added change to use drm_dp_get_adjust_request_voltage() function.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                 |    9 +
 drivers/gpu/drm/msm/Makefile                |   13 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
 drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
 drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
 drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
 drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
 drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
 drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
 drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
 drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
 drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
 drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
 drivers/gpu/drm/msm/dp/dp_link.c            | 1185 ++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
 drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
 drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
 drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
 drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
 drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
 drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
 drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
 drivers/gpu/drm/msm/msm_drv.c               |    2 +
 drivers/gpu/drm/msm/msm_drv.h               |   42 +
 26 files changed, 8366 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 6deaa7d..7946cb1 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
 	help
 	  Choose this option to enable HDCP state machine
 
+config DRM_MSM_DP
+	bool "Enable DP support in MSM DRM driver"
+	depends on DRM_MSM
+	default n
+	help
+	  Compile in support for DP driver in msm drm driver. DP external
+	  display support is enabled through this config option. It can
+	  be primary or secondary display on device.
+
 config DRM_MSM_DSI
 	bool "Enable DSI support in MSM DRM driver"
 	depends on DRM_MSM
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 1579cf0..5939f41 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -2,6 +2,7 @@
 ccflags-y := -I $(srctree)/$(src)
 ccflags-y += -I $(srctree)/$(src)/disp/dpu1
 ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
+ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -96,8 +97,20 @@ msm-y := \
 
 msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
 
+
 msm-$(CONFIG_DRM_MSM_GPU_STATE)	+= adreno/a6xx_gpu_state.o
 
+msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
+	dp/dp_catalog.o \
+	dp/dp_ctrl.o \
+	dp/dp_display.o \
+	dp/dp_drm.o \
+	dp/dp_extcon.o \
+	dp/dp_link.o \
+	dp/dp_panel.o \
+	dp/dp_parser.o \
+	dp/dp_power.o
+
 msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f96e142..29ac7d3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 
 	trace_dpu_enc_mode_set(DRMID(drm_enc));
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
+		msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
+
 	list_for_each_entry(conn_iter, connector_list, head)
 		if (conn_iter->encoder == drm_enc)
 			conn = conn_iter;
@@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
 	int ret = 0;
+	struct msm_drm_private *priv;
 	struct drm_display_mode *cur_mode = NULL;
 
 	if (!drm_enc) {
@@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	mutex_lock(&dpu_enc->enc_lock);
 	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
+	priv = drm_enc->dev->dev_private;
 
 	trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
 			     cur_mode->vdisplay);
@@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	_dpu_encoder_virt_enable_helper(drm_enc);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		ret = msm_dp_display_enable(priv->dp,
+						drm_enc);
+		if (ret) {
+			DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
+				ret);
+			goto out;
+		}
+	}
 	dpu_enc->enabled = true;
 
 out:
@@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
 	priv = drm_enc->dev->dev_private;
 	dpu_kms = to_dpu_kms(priv->kms);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		if (msm_dp_display_disable(priv->dp, drm_enc)) {
+			DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
+			return;
+		  }
+	}
 	trace_dpu_enc_disable(DRMID(drm_enc));
 
 	/* wait for idle */
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
new file mode 100644
index 0000000..a6bb52a
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+
+#include "dp_reg.h"
+#include "dp_aux.h"
+
+#define DP_AUX_ENUM_STR(x)		#x
+
+struct dp_aux_private {
+	struct device *dev;
+	struct dp_aux dp_aux;
+	struct dp_catalog *catalog;
+
+	struct mutex mutex;
+	struct completion comp;
+
+	u32 aux_error_num;
+	u32 retry_cnt;
+	bool cmd_busy;
+	bool native;
+	bool read;
+	bool no_send_addr;
+	bool no_send_stop;
+	u32 offset;
+	u32 segment;
+	u32 isr;
+
+	struct drm_dp_aux drm_aux;
+};
+
+static char *dp_aux_get_error(u32 aux_error)
+{
+	switch (aux_error) {
+	case DP_AUX_ERR_NONE:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
+	case DP_AUX_ERR_ADDR:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
+	case DP_AUX_ERR_TOUT:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
+	case DP_AUX_ERR_NACK:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
+	case DP_AUX_ERR_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
+	case DP_AUX_ERR_NACK_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
+	default:
+		return "unknown";
+	}
+}
+
+static u32 dp_aux_write(struct dp_aux_private *aux,
+			struct drm_dp_aux_msg *msg)
+{
+	u32 data[4], reg, len;
+	u8 *msgdata = msg->buffer;
+	int const aux_cmd_fifo_len = 128;
+	int i = 0;
+
+	if (aux->read)
+		len = 4;
+	else
+		len = msg->size + 4;
+
+	/*
+	 * cmd fifo only has depth of 144 bytes
+	 * limit buf length to 128 bytes here
+	 */
+	if (len > aux_cmd_fifo_len) {
+		DRM_ERROR("buf len error\n");
+		return 0;
+	}
+
+	/* Pack cmd and write to HW */
+	data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
+	if (aux->read)
+		data[0] |=  BIT(4); /* R/W */
+
+	data[1] = (msg->address >> 8) & 0xff;	/* addr[15:8] */
+	data[2] = msg->address & 0xff;		/* addr[7:0] */
+	data[3] = (msg->size - 1) & 0xff;	/* len[7:0] */
+
+	for (i = 0; i < len; i++) {
+		reg = (i < 4) ? data[i] : msgdata[i - 4];
+		/* index = 0, write */
+		reg = (((reg) << DP_AUX_DATA_OFFSET)
+		       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
+		if (i == 0)
+			reg |= DP_AUX_DATA_INDEX_WRITE;
+		aux->catalog->aux_data = reg;
+		dp_catalog_aux_write_data(aux->catalog);
+	}
+
+	dp_catalog_aux_clear_trans(aux->catalog, false);
+
+	reg = 0; /* Transaction number == 1 */
+	if (!aux->native) { /* i2c */
+		reg |= DP_AUX_TRANS_CTRL_I2C;
+
+		if (aux->no_send_addr)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
+
+		if (aux->no_send_stop)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
+	}
+
+	reg |= DP_AUX_TRANS_CTRL_GO;
+	aux->catalog->aux_data = reg;
+	dp_catalog_aux_write_trans(aux->catalog);
+
+	return len;
+}
+
+static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
+			      struct drm_dp_aux_msg *msg)
+{
+	u32 ret = 0, len = 0, timeout;
+	int const aux_timeout_ms = HZ/4;
+
+	reinit_completion(&aux->comp);
+
+	len = dp_aux_write(aux, msg);
+	if (len == 0) {
+		DRM_ERROR("DP AUX write failed\n");
+		return -EINVAL;
+	}
+
+	timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
+	if (!timeout) {
+		DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
+		return -ETIMEDOUT;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		ret = len;
+	} else {
+		DRM_ERROR_RATELIMITED("aux err: %s\n",
+			dp_aux_get_error(aux->aux_error_num));
+
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
+		struct drm_dp_aux_msg *msg)
+{
+	u32 data;
+	u8 *dp;
+	u32 i, actual_i;
+	u32 len = msg->size;
+
+	dp_catalog_aux_clear_trans(aux->catalog, true);
+
+	data = 0;
+	data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
+	data |= DP_AUX_DATA_READ;  /* read */
+
+	aux->catalog->aux_data = data;
+	dp_catalog_aux_write_data(aux->catalog);
+
+	dp = msg->buffer;
+
+	/* discard first byte */
+	data = dp_catalog_aux_read_data(aux->catalog);
+
+	for (i = 0; i < len; i++) {
+		data = dp_catalog_aux_read_data(aux->catalog);
+		*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
+
+		actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
+		if (i != actual_i)
+			pr_warn("Index mismatch: expected %d, found %d\n",
+				i, actual_i);
+	}
+}
+
+static void dp_aux_native_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE)
+		aux->aux_error_num = DP_AUX_ERR_NONE;
+	else if (isr & DP_INTR_WRONG_ADDR)
+		aux->aux_error_num = DP_AUX_ERR_ADDR;
+	else if (isr & DP_INTR_TIMEOUT)
+		aux->aux_error_num = DP_AUX_ERR_TOUT;
+	if (isr & DP_INTR_NACK_DEFER)
+		aux->aux_error_num = DP_AUX_ERR_NACK;
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_i2c_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE) {
+		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		else
+			aux->aux_error_num = DP_AUX_ERR_NONE;
+	} else {
+		if (isr & DP_INTR_WRONG_ADDR)
+			aux->aux_error_num = DP_AUX_ERR_ADDR;
+		else if (isr & DP_INTR_TIMEOUT)
+			aux->aux_error_num = DP_AUX_ERR_TOUT;
+		if (isr & DP_INTR_NACK_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
+		if (isr & DP_INTR_I2C_NACK)
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		if (isr & DP_INTR_I2C_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_DEFER;
+	}
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
+					     struct drm_dp_aux_msg *input_msg)
+{
+	u32 const edid_address = 0x50;
+	u32 const segment_address = 0x30;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	u8 *data = NULL;
+
+	if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
+		(input_msg->address != segment_address)))
+		return;
+
+
+	data = input_msg->buffer;
+	if (input_msg->address == segment_address)
+		aux->segment = *data;
+	else
+		aux->offset = *data;
+}
+
+/**
+ * dp_aux_transfer_helper() - helper function for EDID read transactions
+ *
+ * @aux: DP AUX private structure
+ * @input_msg: input message from DRM upstream APIs
+ *
+ * return: void
+ *
+ * This helper function is used to fix EDID reads for non-compliant
+ * sinks that do not handle the i2c middle-of-transaction flag correctly.
+ */
+static void dp_aux_transfer_helper(struct dp_aux_private *aux,
+				   struct drm_dp_aux_msg *input_msg)
+{
+	struct drm_dp_aux_msg helper_msg;
+	u32 const message_size = 0x10;
+	u32 const segment_address = 0x30;
+	bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+
+	if (!i2c_mot || !i2c_read || (input_msg->size == 0))
+		return;
+
+	aux->read = false;
+	aux->cmd_busy = true;
+	aux->no_send_addr = true;
+	aux->no_send_stop = true;
+
+	/*
+	 * Send the segment address for every i2c read in which the
+	 * middle-of-tranaction flag is set. This is required to support EDID
+	 * reads of more than 2 blocks as the segment address is reset to 0
+	 * since we are overriding the middle-of-transaction flag for read
+	 * transactions.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = segment_address;
+	helper_msg.buffer = &aux->segment;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+
+	/*
+	 * Send the offset address for every i2c read in which the
+	 * middle-of-transaction flag is set. This will ensure that the sink
+	 * will update its read pointer and return the correct portion of the
+	 * EDID buffer in the subsequent i2c read trasntion triggered in the
+	 * native AUX transfer function.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = input_msg->address;
+	helper_msg.buffer = &aux->offset;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+	aux->offset += message_size;
+
+	if (aux->offset == 0x80 || aux->offset == 0x100)
+		aux->segment = 0x0; /* reset segment at end of block */
+}
+
+/*
+ * This function does the real job to process an AUX transaction.
+ * It will call aux_reset() function to reset the AUX channel,
+ * if the waiting is timeout.
+ */
+static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	ssize_t ret;
+	int const aux_cmd_native_max = 16;
+	int const aux_cmd_i2c_max = 128;
+	int const retry_count = 5;
+	struct dp_aux_private *aux = container_of(drm_aux,
+		struct dp_aux_private, drm_aux);
+
+	mutex_lock(&aux->mutex);
+
+	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+
+	/* Ignore address only message */
+	if ((msg->size == 0) || (msg->buffer == NULL)) {
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+		ret = msg->size;
+		goto unlock_exit;
+	}
+
+	/* msg sanity check */
+	if ((aux->native && (msg->size > aux_cmd_native_max)) ||
+		(msg->size > aux_cmd_i2c_max)) {
+		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
+			__func__, msg->size, msg->request);
+		ret = -EINVAL;
+		goto unlock_exit;
+	}
+
+	dp_aux_update_offset_and_segment(aux, msg);
+	dp_aux_transfer_helper(aux, msg);
+
+	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	aux->cmd_busy = true;
+
+	if (aux->read) {
+		aux->no_send_addr = true;
+		aux->no_send_stop = false;
+	} else {
+		aux->no_send_addr = true;
+		aux->no_send_stop = true;
+	}
+
+	ret = dp_aux_cmd_fifo_tx(aux, msg);
+	if ((ret < 0) && aux->native) {
+		aux->retry_cnt++;
+		if (!(aux->retry_cnt % retry_count))
+			dp_catalog_aux_update_cfg(aux->catalog,
+				aux->dp_aux.cfg, PHY_AUX_CFG1);
+		dp_catalog_aux_reset(aux->catalog);
+		goto unlock_exit;
+	} else if (ret < 0) {
+		goto unlock_exit;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		if (aux->read)
+			dp_aux_cmd_fifo_rx(aux, msg);
+
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+	} else {
+		/* Reply defer to retry */
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+	}
+
+	/* Return requested size for success or retry */
+	ret = msg->size;
+	aux->retry_cnt = 0;
+
+unlock_exit:
+	aux->cmd_busy = false;
+	mutex_unlock(&aux->mutex);
+	return ret;
+}
+
+static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg *aux_cfg)
+{
+	int i = 0;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++)
+		aux_cfg[i].current_index = 0;
+}
+
+void dp_aux_isr(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->isr = dp_catalog_aux_get_irq(aux->catalog);
+
+	if (!aux->cmd_busy)
+		return;
+
+	if (aux->native)
+		dp_aux_native_handler(aux);
+	else
+		dp_aux_i2c_handler(aux);
+}
+
+void dp_aux_reconfig(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_update_cfg(aux->catalog,
+			dp_aux->cfg, PHY_AUX_CFG1);
+	dp_catalog_aux_reset(aux->catalog);
+}
+
+void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_aux_reset_phy_config_indices(aux_cfg);
+	dp_catalog_aux_setup(aux->catalog, aux_cfg);
+	dp_catalog_aux_reset(aux->catalog);
+	dp_catalog_aux_enable(aux->catalog, true);
+	aux->retry_cnt = 0;
+}
+
+void dp_aux_deinit(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_enable(aux->catalog, false);
+}
+
+int dp_aux_register(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+	int ret = 0;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->drm_aux.name = "dpu_dp_aux";
+	aux->drm_aux.dev = aux->dev;
+	aux->drm_aux.transfer = dp_aux_transfer;
+	ret = drm_dp_aux_register(&aux->drm_aux);
+	if (ret) {
+		DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
+		goto exit;
+	}
+	dp_aux->drm_aux = &aux->drm_aux;
+exit:
+	return ret;
+}
+
+void dp_aux_unregister(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+	drm_dp_aux_unregister(&aux->drm_aux);
+}
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg)
+{
+	int rc = 0;
+	struct dp_aux_private *aux;
+	struct dp_aux *dp_aux;
+
+	if (!catalog || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
+	if (!aux) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&aux->comp);
+	aux->cmd_busy = false;
+	mutex_init(&aux->mutex);
+
+	aux->dev = dev;
+	aux->catalog = catalog;
+	aux->dp_aux.cfg = aux_cfg;
+	dp_aux = &aux->dp_aux;
+	aux->retry_cnt = 0;
+
+	return dp_aux;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_aux_put(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux)
+		return;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	mutex_destroy(&aux->mutex);
+
+	devm_kfree(aux->dev, aux);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
new file mode 100644
index 0000000..8ce2221
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_AUX_H_
+#define _DP_AUX_H_
+
+#include "dp_catalog.h"
+#include <drm/drm_dp_helper.h>
+
+enum dp_aux_error {
+	DP_AUX_ERR_NONE	= 0,
+	DP_AUX_ERR_ADDR	= -1,
+	DP_AUX_ERR_TOUT	= -2,
+	DP_AUX_ERR_NACK	= -3,
+	DP_AUX_ERR_DEFER	= -4,
+	DP_AUX_ERR_NACK_DEFER	= -5,
+};
+
+struct dp_aux {
+	struct drm_dp_aux *drm_aux;
+	struct dp_aux_cfg *cfg;
+};
+
+int dp_aux_register(struct dp_aux *aux);
+void dp_aux_unregister(struct dp_aux *aux);
+void dp_aux_isr(struct dp_aux *aux);
+void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
+void dp_aux_deinit(struct dp_aux *aux);
+void dp_aux_reconfig(struct dp_aux *aux);
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg);
+void dp_aux_put(struct dp_aux *aux);
+
+#endif /*__DP_AUX_H_*/
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
new file mode 100644
index 0000000..51e21bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -0,0 +1,841 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <drm/drm_dp_helper.h>
+
+#include "dp_catalog.h"
+#include "dp_reg.h"
+
+#define POLLING_SLEEP_US			1000
+#define POLLING_TIMEOUT_US			10000
+
+#define REFTIMER_DEFAULT_VALUE			0x20000
+#define SCRAMBLER_RESET_COUNT_VALUE		0xFC
+
+#define DP_INTERRUPT_STATUS_ACK_SHIFT	1
+#define DP_INTERRUPT_STATUS_MASK_SHIFT	2
+
+#define DP_INTERRUPT_STATUS1 \
+	(DP_INTR_AUX_I2C_DONE| \
+	DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
+	DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
+	DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
+	DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
+
+#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+#define DP_INTERRUPT_STATUS2 \
+	(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
+	DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
+
+#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+static u8 const vm_pre_emphasis[4][4] = {
+	{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
+	{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
+	{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
+	{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static u8 const vm_voltage_swing[4][4] = {
+	{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
+	{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
+	{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
+	{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
+};
+
+struct dp_catalog_private {
+	struct device *dev;
+	struct dp_io *io;
+	struct dp_catalog dp_catalog;
+};
+
+static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_aux.base + offset);
+}
+
+static inline void dp_write_aux(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure aux reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_aux.base + offset);
+}
+
+static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_ahb.base + offset);
+}
+
+static inline void dp_write_ahb(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_ahb.base + offset);
+}
+
+static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_cc_io.base + offset);
+}
+
+static inline void dp_write_phy(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->phy_io.base + offset);
+}
+
+static inline void dp_write_pll(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
+}
+
+static inline void dp_write_ln_tx0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
+}
+
+static inline void dp_write_ln_tx1(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
+}
+
+static inline void dp_write_usb_cm(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure usb reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->usb3_dp_com.base + offset);
+}
+
+static inline void dp_write_p0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure interface reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_p0.base + offset);
+}
+
+static inline u32 dp_read_link(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_link.base + offset);
+}
+
+static inline void dp_write_link(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure link reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_link.base + offset);
+}
+
+/* aux related catalog functions */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_aux(catalog, REG_DP_AUX_DATA);
+}
+
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read)
+{
+	int rc = 0;
+	u32 data = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (read) {
+		data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
+		data &= ~DP_AUX_TRANS_CTRL_GO;
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
+	} else {
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
+	}
+	return rc;
+}
+
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	aux_ctrl |= DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	aux_ctrl &= ~DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	if (enable) {
+		dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
+		dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
+		aux_ctrl |= DP_AUX_CTRL_ENABLE;
+	} else {
+		aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
+	}
+
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 new_index = 0, current_index = 0;
+
+	if (type >= PHY_AUX_CFG_MAX) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	current_index = cfg[type].current_index;
+	new_index = (current_index + 1) % cfg[type].cfg_cnt;
+	DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
+		dp_phy_aux_config_type_to_string(type),
+	cfg[type].lut[current_index], cfg[type].lut[new_index]);
+
+	dp_write_phy(catalog, cfg[type].offset,
+			cfg[type].lut[new_index]);
+	cfg[type].current_index = new_index;
+}
+
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	int i = 0;
+
+	dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
+		DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+		DP_PHY_PD_CTL_DP_CLAMP_EN);
+
+	/* Turn on BIAS current for PHY/PLL */
+	dp_write_pll(catalog,
+		QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
+		QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
+		QSERDES_COM_EN_SYSCLK_TX_SEL);
+
+	/* DP AUX CFG register programming */
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
+			dp_phy_aux_config_type_to_string(i),
+			cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
+		dp_write_phy(catalog, cfg[i].offset,
+			cfg[i].lut[cfg[i].current_index]);
+	}
+
+	dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK, PHY_AUX_STOP_ERR_MASK |
+			PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
+			PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
+}
+
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
+	intr &= ~DP_INTERRUPT_STATUS1_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS1) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack | DP_INTERRUPT_STATUS1_MASK);
+
+	return intr;
+
+}
+
+/* controller related catalog functions */
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
+	dp_write_link(catalog, REG_DP_TU, dp_tu);
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
+}
+
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_STATE_CTRL, state);
+}
+
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
+
+	dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
+}
+
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
+	u32 ln_mapping;
+
+	ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
+	ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
+	ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
+	ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
+
+	dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING, ln_mapping);
+}
+
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	u32 mainlink_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (enable) {
+		/*
+		* To make sure link reg writes happens before any other operation,
+		* dp_write_link() function uses writel() instread of writel_relaxed()
+		*/
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
+	} else {
+		mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
+		mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
+	}
+}
+
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
+					u32 colorimetry_cfg, u32 test_bits_depth)
+{
+	u32 misc_val;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
+	misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
+	misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
+	/* Configure clock to synchronous mode */
+	misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
+
+	DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
+	dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
+}
+
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
+					u32 rate, u32 stream_rate_khz,
+					bool fixed_nvid)
+{
+	u32 pixel_m, pixel_n;
+	u32 mvid, nvid;
+	u64 mvid_calc;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (fixed_nvid) {
+		nvid = DP_LINK_CONSTANT_N_VALUE;
+		DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
+
+		/*
+		 * For intermediate results, use 64 bit arithmetic to avoid
+		 * loss of precision.
+		 */
+		mvid_calc = (u64) stream_rate_khz * nvid;
+		mvid_calc = div_u64(mvid_calc, rate);
+
+		/*
+		 * truncate back to 32 bits as this final divided value will
+		 * always be within the range of a 32 bit unsigned int.
+		 */
+		mvid = (u32) mvid_calc;
+		DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
+			rate, stream_rate_khz);
+	} else {
+		pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
+		pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
+		DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
+
+		mvid = (pixel_m & 0xFFFF) * 5;
+		nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
+
+		DRM_DEBUG_DP("rate = %d\n", rate);
+
+		switch (drm_dp_link_rate_to_bw_code(rate)) {
+		case DP_LINK_BW_5_4:
+			nvid *= 2;
+			break;
+		case DP_LINK_BW_8_1:
+			nvid *= 3;
+			break;
+		default:
+			break;
+		}
+	}
+
+	DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
+}
+
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
+					u32 pattern)
+{
+	int bit, ret;
+	u32 data;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	bit = BIT(pattern - 1);
+	DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
+	dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
+
+	bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl, catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & bit,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
+		return ret;
+	}
+	return 0;
+}
+
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 typec_ctrl;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
+			USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
+			USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
+						USB3_DP_COM_PHY_MODE_DP);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
+						USB3_DP_COM_SW_RESET_SET);
+
+	/* Default configuration i.e CC1 */
+	typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
+	if (flip)
+		typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
+						USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
+
+}
+
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
+{
+	u32 sw_reset;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
+
+	sw_reset |= DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	sw_reset &= ~DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+}
+
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
+{
+	u32 data;
+	int ret;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl,
+				 catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & DP_MAINLINK_READY_FOR_VIDEO,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("mainlink not ready\n");
+		return false;
+	}
+
+	return true;
+}
+
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	if (enable) {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, DP_INTERRUPT_STATUS1_MASK);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, DP_INTERRUPT_STATUS2_MASK);
+	} else {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
+	}
+}
+
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool en)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (en) {
+		u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
+
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
+				DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
+				DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
+				DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
+				DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
+
+		/* Configure REFTIMER */
+		reftimer |= REFTIMER_DEFAULT_VALUE;
+		dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
+		/* Enable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
+	} else {
+		/* Disable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
+	}
+}
+
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
+	intr &= ~DP_INTERRUPT_STATUS2_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS2) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack | DP_INTERRUPT_STATUS2_MASK);
+
+	return intr;
+}
+
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL,
+			DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
+}
+
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
+		bool flipped, u8 ln_cnt)
+{
+	u32 info;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 orientation = BIT(!!flipped);
+
+	info = ln_cnt & DP_PHY_SPARE0_MASK;
+	info |= (orientation & DP_PHY_SPARE0_MASK) << DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
+	DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
+
+	dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
+}
+
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
+		u8 v_level, u8 p_level)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 voltage_swing_cfg, pre_emphasis_cfg;
+
+	DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
+
+	voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
+	pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
+
+	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
+		DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
+			v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
+		return -EINVAL;
+	}
+
+	/* Enable MUX to use Cursor values from these registers */
+	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+	/* Configure host and panel only if both values are allowed */
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
+			voltage_swing_cfg, pre_emphasis_cfg);
+
+	return 0;
+}
+
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+			u32 pattern)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 value = 0x0;
+
+	/* Make sure to clear the current pattern before starting a new one */
+	dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
+
+	switch (pattern) {
+	case DP_LINK_QUAL_PATTERN_D10_2:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
+		return;
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
+		return;
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
+		/* 00111110000011111000001111100000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0, 0x3E0F83E0);
+		/* 00001111100000111110000011111000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1, 0x0F83E0F8);
+		/* 1111100000111110 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2, 0x0000F83E);
+		return;
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+		value &= ~DP_HBR2_ERM_PATTERN;
+		if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
+			value = DP_HBR2_ERM_PATTERN;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		value |= SCRAMBLER_RESET_COUNT_VALUE;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		dp_write_link(catalog, REG_DP_MAINLINK_LEVELS, DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
+		return;
+	default:
+		DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
+		return;
+	}
+}
+
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_link(catalog, REG_DP_MAINLINK_READY);
+}
+
+/* panel related catalog functions */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
+	dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC, dp_catalog->sync_start);
+	dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY, dp_catalog->width_blanking);
+	dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
+	return 0;
+}
+
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 hsync_period, vsync_period;
+	u32 display_v_start, display_v_end;
+	u32 hsync_start_x, hsync_end_x;
+	u32 v_sync_width;
+	u32 hsync_ctl;
+	u32 display_hctl;
+
+	/* TPG config parameters*/
+	hsync_period = drm_mode->htotal;
+	vsync_period = drm_mode->vtotal;
+
+	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
+					hsync_period);
+	display_v_end = ((vsync_period - drm_mode->vsync_start -
+					drm_mode->vdisplay) * hsync_period) - 1;
+
+	display_v_start += drm_mode->htotal - drm_mode->hsync_start;
+	display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
+
+	hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
+	hsync_end_x = hsync_period - drm_mode->hsync_start -
+					drm_mode->hdisplay - 1;
+
+	v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
+
+	hsync_ctl = (hsync_period << 16) |
+			(drm_mode->hsync_end - drm_mode->hsync_start);
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+
+	dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
+	dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, DP_TPG_CHECKERED_RECT_PATTERN);
+	dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
+					DP_TPG_VIDEO_CONFIG_BPP_8BIT |
+					DP_TPG_VIDEO_CONFIG_RGB);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, DP_TIMING_ENGINE_EN_EN);
+	DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
+}
+
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
+	return;
+}
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io)
+{
+	int rc = 0;
+	struct dp_catalog *dp_catalog;
+	struct dp_catalog_private *catalog;
+
+	if (!io) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
+	if (!catalog) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	catalog->dev = dev;
+	catalog->io = io;
+
+	dp_catalog = &catalog->dp_catalog;
+
+	return dp_catalog;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_catalog_put(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog;
+
+	if (!dp_catalog)
+		return;
+
+	catalog = container_of(dp_catalog, struct dp_catalog_private,
+				dp_catalog);
+
+	devm_kfree(catalog->dev, catalog);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
new file mode 100644
index 0000000..51c82dd
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CATALOG_H_
+#define _DP_CATALOG_H_
+
+#include "dp_parser.h"
+
+/* interrupts */
+#define DP_INTR_HPD		BIT(0)
+#define DP_INTR_AUX_I2C_DONE	BIT(3)
+#define DP_INTR_WRONG_ADDR	BIT(6)
+#define DP_INTR_TIMEOUT		BIT(9)
+#define DP_INTR_NACK_DEFER	BIT(12)
+#define DP_INTR_WRONG_DATA_CNT	BIT(15)
+#define DP_INTR_I2C_NACK	BIT(18)
+#define DP_INTR_I2C_DEFER	BIT(21)
+#define DP_INTR_PLL_UNLOCKED	BIT(24)
+#define DP_INTR_AUX_ERROR	BIT(27)
+
+#define DP_INTR_READY_FOR_VIDEO		BIT(0)
+#define DP_INTR_IDLE_PATTERN_SENT	BIT(3)
+#define DP_INTR_FRAME_END		BIT(6)
+#define DP_INTR_CRC_UPDATED		BIT(9)
+
+struct dp_catalog {
+	u32 aux_data;
+	u32 total;
+	u32 sync_start;
+	u32 width_blanking;
+	u32 dp_active;
+};
+
+/* AUX APIs */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read);
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *aux_cfg);
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
+
+/* DP Controller APIs */
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 config);
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32 cc, u32 tb);
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32 rate,
+				u32 stream_rate_khz, bool fixed_nvid);
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32 pattern);
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip);
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool flipped,
+				u8 lane_cnt);
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8 v_level,
+				u8 p_level);
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+				u32 pattern);
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
+
+/* DP Panel APIs */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode);
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io);
+void dp_catalog_put(struct dp_catalog *catalog);
+
+#endif /* _DP_CATALOG_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
new file mode 100644
index 0000000..a4575ea
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/types.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <drm/drm_fixed.h>
+
+#include "dp_reg.h"
+#include "dp_ctrl.h"
+
+#define DP_KHZ_TO_HZ 1000
+#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES	(30 * HZ / 1000) /* 30 ms */
+#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
+
+#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
+#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
+
+#define MR_LINK_TRAINING1  0x8
+#define MR_LINK_SYMBOL_ERM 0x80
+#define MR_LINK_PRBS7 0x100
+#define MR_LINK_CUSTOM80 0x200
+
+struct dp_tu_calc_input {
+	u64 lclk;        /* 162, 270, 540 and 810 */
+	u64 pclk_khz;    /* in KHz */
+	u64 hactive;     /* active h-width */
+	u64 hporch;      /* bp + fp + pulse */
+	int nlanes;      /* no.of.lanes */
+	int bpp;         /* bits */
+	int pixel_enc;   /* 444, 420, 422 */
+	int dsc_en;     /* dsc on/off */
+	int async_en;   /* async mode */
+};
+
+struct dp_vc_tu_mapping_table {
+	u8 valid_boundary_link;
+	u16 delay_start_link;
+	bool boundary_moderation_en;
+	u8 valid_lower_boundary_link;
+	u8 upper_boundary_count;
+	u8 lower_boundary_count;
+	u8 tu_size_minus1;
+};
+
+struct dp_ctrl_private {
+	struct dp_ctrl dp_ctrl;
+
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_panel *panel;
+	struct dp_link *link;
+	struct dp_power *power;
+	struct dp_parser *parser;
+	struct dp_catalog *catalog;
+
+	struct completion idle_comp;
+	struct mutex push_idle_mutex;
+	struct completion video_comp;
+};
+
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_lock(&ctrl->push_idle_mutex);
+
+	reinit_completion(&ctrl->idle_comp);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
+
+	if (!wait_for_completion_timeout(&ctrl->idle_comp,
+			IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
+		pr_warn("PUSH_IDLE pattern timedout\n");
+
+	mutex_unlock(&ctrl->push_idle_mutex);
+	pr_debug("mainlink off done\n");
+}
+
+static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
+{
+	u32 config = 0, tbd;
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/* Default-> LSCLK DIV: 1/4 LCLK  */
+	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
+
+	/* Scrambler reset enable */
+	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
+		config |= DP_CONFIGURATION_CTRL_ASSR;
+
+	tbd = dp_link_get_test_bits_depth(ctrl->link,
+			ctrl->panel->dp_mode.bpp);
+
+	if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
+		pr_debug("BIT_DEPTH not set. Configure default\n");
+		tbd = DP_TEST_BIT_DEPTH_8;
+	}
+
+	config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
+
+	/* Num of Lanes */
+	config |= ((ctrl->link->link_params.num_lanes - 1)
+			<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
+
+	if (drm_dp_enhanced_frame_cap(dpcd))
+		config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
+
+	config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
+
+	/* sync clock & static Mvid */
+	config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
+	config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
+
+	dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
+}
+
+/**
+ * dp_ctrl_configure_source_params() - configures DP transmitter source params
+ * @ctrl: Display Port Driver data
+ *
+ * Configures the DP transmitter source params including details such as lane
+ * configuration, output format and sink/panel timing information.
+ */
+static void dp_ctrl_configure_source_params(struct dp_ctrl_private *ctrl)
+{
+	u32 cc, tb;
+
+	dp_catalog_ctrl_lane_mapping(ctrl->catalog);
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	tb = dp_link_get_test_bits_depth(ctrl->link,
+		ctrl->panel->dp_mode.bpp);
+	cc = dp_link_get_colorimetry_config(ctrl->link);
+	dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
+	dp_panel_timing_cfg(ctrl->panel);
+}
+
+/*
+ * The structure and few functions present below are IP/Hardware
+ * specific implementation. Most of the implementation will not
+ * have coding comments
+ */
+struct tu_algo_data {
+	s64 lclk_fp;
+	s64 pclk_fp;
+	s64 lwidth;
+	s64 hbp_relative_to_pclk;
+	int nlanes;
+	int bpp;
+	int pixelEnc;
+	int dsc_en;
+	int async_en;
+	int bpc;
+
+	uint delay_start_link_extra_pixclk;
+	int extra_buffer_margin;
+	s64 ratio_fp;
+	s64 original_ratio_fp;
+
+	s64 err_fp;
+	s64 n_err_fp;
+	s64 n_n_err_fp;
+	int tu_size;
+	int tu_size_desired;
+	int tu_size_minus1;
+
+	int valid_boundary_link;
+	s64 resulting_valid_fp;
+	s64 total_valid_fp;
+	s64 effective_valid_fp;
+	s64 effective_valid_recorded_fp;
+	int n_tus;
+	int n_tus_per_lane;
+	int paired_tus;
+	int remainder_tus;
+	int remainder_tus_upper;
+	int remainder_tus_lower;
+	int extra_bytes;
+	int filler_size;
+	int delay_start_link;
+
+	int extra_pclk_cycles;
+	int extra_pclk_cycles_in_link_clk;
+	s64 ratio_by_tu_fp;
+	s64 average_valid2_fp;
+	int new_valid_boundary_link;
+	int remainder_symbols_exist;
+	int n_symbols;
+	s64 n_remainder_symbols_per_lane_fp;
+	s64 last_partial_tu_fp;
+	s64 TU_ratio_err_fp;
+
+	int n_tus_incl_last_incomplete_tu;
+	int extra_pclk_cycles_tmp;
+	int extra_pclk_cycles_in_link_clk_tmp;
+	int extra_required_bytes_new_tmp;
+	int filler_size_tmp;
+	int lower_filler_size_tmp;
+	int delay_start_link_tmp;
+
+	bool boundary_moderation_en;
+	int boundary_mod_lower_err;
+	int upper_boundary_count;
+	int lower_boundary_count;
+	int i_upper_boundary_count;
+	int i_lower_boundary_count;
+	int valid_lower_boundary_link;
+	int even_distribution_BF;
+	int even_distribution_legacy;
+	int even_distribution;
+	int min_hblank_violated;
+	s64 delay_start_time_fp;
+	s64 hbp_time_fp;
+	s64 hactive_time_fp;
+	s64 diff_abs_fp;
+
+	s64 ratio;
+};
+
+static int _tu_param_compare(s64 a, s64 b)
+{
+	u32 a_int, a_frac;
+	u32 b_int, b_frac;
+
+	if (a == b)
+		return 0;
+
+	a_int = (a >> 32) & 0x7FFFFFFF;
+	a_frac = a & 0xFFFFFFFF;
+
+	b_int = (b >> 32) & 0x7FFFFFFF;
+	b_frac = b & 0xFFFFFFFF;
+
+	if (a_int > b_int)
+		return 1;
+	else if (a_int < b_int)
+		return 2;
+	else if (a_frac > b_frac)
+		return 1;
+	else
+		return 2;
+}
+
+static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
+{
+	s64 temp1_fp, temp2_fp, temp, temp1, temp2;
+	int compare_result_1, compare_result_2, compare_result_3;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+
+	tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp = (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link-1));
+	tu->average_valid2_fp = drm_fixp_from_fraction(temp,
+					(tu->i_upper_boundary_count +
+					tu->i_lower_boundary_count));
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+	tu->n_tus = drm_fixp2int(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu->n_remainder_symbols_per_lane_fp = temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	tu->last_partial_tu_fp =
+			drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
+					temp1_fp);
+
+	if (tu->n_remainder_symbols_per_lane_fp != 0)
+		tu->remainder_symbols_exist = 1;
+	else
+		tu->remainder_symbols_exist = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
+	tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
+
+	tu->paired_tus = (int)((tu->n_tus_per_lane) /
+					(tu->i_upper_boundary_count +
+					 tu->i_lower_boundary_count));
+
+	tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
+						(tu->i_upper_boundary_count +
+						tu->i_lower_boundary_count);
+
+	if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
+		tu->remainder_tus_upper = tu->i_upper_boundary_count;
+		tu->remainder_tus_lower = tu->remainder_tus -
+						tu->i_upper_boundary_count;
+	} else {
+		tu->remainder_tus_upper = tu->remainder_tus;
+		tu->remainder_tus_lower = 0;
+	}
+
+	temp = tu->paired_tus * (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link - 1)) +
+				(tu->remainder_tus_upper *
+				 tu->new_valid_boundary_link) +
+				(tu->remainder_tus_lower *
+				(tu->new_valid_boundary_link - 1));
+	tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
+
+	if (tu->remainder_symbols_exist) {
+		temp1_fp = tu->total_valid_fp +
+				tu->n_remainder_symbols_per_lane_fp;
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp2_fp = temp2_fp + tu->last_partial_tu_fp;
+		temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	} else {
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
+	}
+	tu->effective_valid_fp = temp1_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
+
+	tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+
+	if (temp2_fp)
+		tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu->n_tus_incl_last_incomplete_tu = 0;
+
+	temp1 = 0;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = tu->average_valid2_fp - temp2_fp;
+	temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		temp1 = drm_fixp2int_ceil(temp1_fp);
+
+	temp = tu->i_upper_boundary_count * tu->nlanes;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp2_fp)
+		temp2 = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp2 = 0;
+	tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
+
+	temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
+	temp2_fp = drm_fixp_from_fraction(
+	tu->extra_required_bytes_new_tmp, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_tmp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
+	temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_in_link_clk_tmp =
+						drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_in_link_clk_tmp = 0;
+
+	tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
+
+	tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
+
+	tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
+					tu->lower_filler_size_tmp +
+					tu->extra_buffer_margin;
+
+	temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
+	tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu->n_n_err_fp, tu->diff_abs_fp);
+	if (compare_result_1 == 2)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
+	if (compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
+					tu->delay_start_time_fp);
+	if (compare_result_3 == 2)
+		compare_result_3 = 0;
+	else
+		compare_result_3 = 1;
+
+	if (((tu->even_distribution == 1) ||
+			((tu->even_distribution_BF == 0) &&
+			(tu->even_distribution_legacy == 0))) &&
+			tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
+			compare_result_2 &&
+			(compare_result_1 || (tu->min_hblank_violated == 1)) &&
+			(tu->new_valid_boundary_link - 1) > 0 &&
+			compare_result_3 &&
+			(tu->delay_start_link_tmp <= 1023)) {
+		tu->upper_boundary_count = tu->i_upper_boundary_count;
+		tu->lower_boundary_count = tu->i_lower_boundary_count;
+		tu->err_fp = tu->n_n_err_fp;
+		tu->boundary_moderation_en = true;
+		tu->tu_size_desired = tu->tu_size;
+		tu->valid_boundary_link = tu->new_valid_boundary_link;
+		tu->effective_valid_recorded_fp = tu->effective_valid_fp;
+		tu->even_distribution_BF = 1;
+		tu->delay_start_link = tu->delay_start_link_tmp;
+	} else if (tu->boundary_mod_lower_err == 0) {
+		compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
+							tu->diff_abs_fp);
+		if (compare_result_1 == 2)
+			tu->boundary_mod_lower_err = 1;
+	}
+}
+
+static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
+				   struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct tu_algo_data tu;
+	int compare_result_1, compare_result_2;
+	u64 temp = 0;
+	s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
+
+	s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006 */
+	s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
+	s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
+	s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
+
+	u8 DP_BRUTE_FORCE = 1;
+	s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1 */
+	uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
+	uint HBLANK_MARGIN = 4;
+
+	memset(&tu, 0, sizeof(tu));
+
+	tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
+	tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
+	tu.lwidth               = in->hactive;
+	tu.hbp_relative_to_pclk = in->hporch;
+	tu.nlanes               = in->nlanes;
+	tu.bpp                  = in->bpp;
+	tu.pixelEnc             = in->pixel_enc;
+	tu.dsc_en               = in->dsc_en;
+	tu.async_en             = in->async_en;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
+
+	if (tu.pixelEnc == 420) {
+		temp_fp = drm_fixp_from_fraction(2, 1);
+		tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
+		tu.lwidth /= 2;
+		tu.hbp_relative_to_pclk /= 2;
+	}
+
+	if (tu.pixelEnc == 422) {
+		switch (tu.bpp) {
+		case 24:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		case 30:
+			tu.bpp = 20;
+			tu.bpc = 10;
+			break;
+		default:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		}
+	} else {
+		tu.bpc = tu.bpp/3;
+	}
+
+	temp1_fp = drm_fixp_from_fraction(4, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
+	temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
+	tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
+
+	tu.original_ratio_fp = tu.ratio_fp;
+	tu.boundary_moderation_en = false;
+	tu.upper_boundary_count = 0;
+	tu.lower_boundary_count = 0;
+	tu.i_upper_boundary_count = 0;
+	tu.i_lower_boundary_count = 0;
+	tu.valid_lower_boundary_link = 0;
+	tu.even_distribution_BF = 0;
+	tu.even_distribution_legacy = 0;
+	tu.even_distribution = 0;
+	tu.delay_start_time_fp = 0;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1);
+	tu.n_err_fp = 0;
+	tu.n_n_err_fp = 0;
+
+	tu.ratio = drm_fixp2int(tu.ratio_fp);
+	if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
+			!tu.ratio && tu.dsc_en == 0) {
+		tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
+		tu.ratio = drm_fixp2int(tu.ratio_fp);
+		if (tu.ratio)
+			tu.ratio_fp = drm_fixp_from_fraction(1, 1);
+	}
+
+	if (tu.ratio > 1)
+		tu.ratio = 1;
+
+	if (tu.ratio == 1)
+		goto tu_size_calc;
+
+	compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
+	if (!compare_result_1 || compare_result_1 == 1)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
+	if (!compare_result_2 || compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	if (tu.dsc_en && compare_result_1 && compare_result_2) {
+		HBLANK_MARGIN += 4;
+		DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
+	}
+
+tu_size_calc:
+	for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+		temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
+		temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+		temp = drm_fixp2int_ceil(temp2_fp);
+		temp1_fp = drm_fixp_from_fraction(temp, 1);
+		tu.n_err_fp = temp1_fp - temp2_fp;
+
+		if (tu.n_err_fp < tu.err_fp) {
+			tu.err_fp = tu.n_err_fp;
+			tu.tu_size_desired = tu.tu_size;
+		}
+	}
+
+	tu.tu_size_minus1 = tu.tu_size_desired - 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+	tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.n_tus = drm_fixp2int(temp2_fp);
+
+	tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
+	DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
+		tu.valid_boundary_link, tu.n_tus);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp2_fp);
+	if (temp && temp2_fp)
+		tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu.extra_bytes = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
+	temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles = 0;
+
+	temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+	temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles_in_link_clk = 0;
+
+	tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+
+	tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
+				tu.filler_size + tu.extra_buffer_margin;
+
+	tu.resulting_valid_fp =
+			drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+	tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+
+	temp1_fp = drm_fixp_from_fraction(
+			(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
+	tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
+					tu.delay_start_time_fp);
+	if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp) */
+		tu.min_hblank_violated = 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
+						tu.delay_start_time_fp);
+	if (compare_result_2 == 2)
+		tu.min_hblank_violated = 1;
+
+	tu.delay_start_time_fp = 0;
+
+	/* brute force */
+
+	tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
+	tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
+
+	temp = drm_fixp2int(tu.diff_abs_fp);
+	if (!temp && tu.diff_abs_fp <= 0xffff)
+		tu.diff_abs_fp = 0;
+
+	/* if(diff_abs < 0) diff_abs *= -1 */
+	if (tu.diff_abs_fp < 0)
+		tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
+
+	tu.boundary_mod_lower_err = 0;
+	if ((tu.diff_abs_fp != 0 &&
+			((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
+			 (tu.even_distribution_legacy == 0) ||
+			 (DP_BRUTE_FORCE == 1))) ||
+			(tu.min_hblank_violated == 1)) {
+		do {
+			tu.err_fp = drm_fixp_from_fraction(1000, 1);
+
+			temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+			temp2_fp = drm_fixp_from_fraction(
+					tu.delay_start_link_extra_pixclk, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.extra_buffer_margin =
+					drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.extra_buffer_margin = 0;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.n_symbols = 0;
+
+			for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+				for (tu.i_upper_boundary_count = 1;
+					tu.i_upper_boundary_count <= 15;
+					tu.i_upper_boundary_count++) {
+					for (tu.i_lower_boundary_count = 1;
+						tu.i_lower_boundary_count <= 15;
+						tu.i_lower_boundary_count++) {
+						_tu_valid_boundary_calc(&tu);
+					}
+				}
+			}
+			tu.delay_start_link_extra_pixclk--;
+		} while (tu.boundary_moderation_en != true &&
+			tu.boundary_mod_lower_err == 1 &&
+			tu.delay_start_link_extra_pixclk != 0);
+
+		if (tu.boundary_moderation_en == true) {
+			temp1_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count *
+					tu.valid_boundary_link +
+					tu.lower_boundary_count *
+					(tu.valid_boundary_link - 1)), 1);
+			temp2_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count +
+					tu.lower_boundary_count), 1);
+			tu.resulting_valid_fp =
+					drm_fixp_div(temp1_fp, temp2_fp);
+
+			temp1_fp = drm_fixp_from_fraction(
+					tu.tu_size_desired, 1);
+			tu.ratio_by_tu_fp =
+				drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+
+			tu.valid_lower_boundary_link =
+				tu.valid_boundary_link - 1;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+			temp2_fp = drm_fixp_div(temp1_fp,
+						tu.resulting_valid_fp);
+			tu.n_tus = drm_fixp2int(temp2_fp);
+
+			tu.tu_size_minus1 = tu.tu_size_desired - 1;
+			tu.even_distribution_BF = 1;
+
+			temp1_fp =
+				drm_fixp_from_fraction(tu.tu_size_desired, 1);
+			temp2_fp =
+				drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+			tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+		}
+	}
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
+
+	if (temp2_fp)
+		temp = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+	temp = drm_fixp2int(temp2_fp);
+
+	if (tu.async_en)
+		tu.delay_start_link += (int)temp;
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	/* OUTPUTS */
+	tu_table->valid_boundary_link       = tu.valid_boundary_link;
+	tu_table->delay_start_link          = tu.delay_start_link;
+	tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
+	tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
+	tu_table->upper_boundary_count      = tu.upper_boundary_count;
+	tu_table->lower_boundary_count      = tu.lower_boundary_count;
+	tu_table->tu_size_minus1            = tu.tu_size_minus1;
+
+	DRM_DEBUG_DP("TU: valid_boundary_link: %d\n", tu_table->valid_boundary_link);
+	DRM_DEBUG_DP("TU: delay_start_link: %d\n", tu_table->delay_start_link);
+	DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
+			tu_table->boundary_moderation_en);
+	DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
+			tu_table->valid_lower_boundary_link);
+	DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
+			tu_table->upper_boundary_count);
+	DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
+			tu_table->lower_boundary_count);
+	DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
+}
+
+static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
+		struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct dp_tu_calc_input in;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &ctrl->panel->dp_mode.drm_mode;
+
+	in.lclk = ctrl->link->link_params.rate / 1000;
+	in.pclk_khz = drm_mode->clock;
+	in.hactive = drm_mode->hdisplay;
+	in.hporch = drm_mode->htotal - drm_mode->hdisplay;
+	in.nlanes = ctrl->link->link_params.num_lanes;
+	in.bpp = ctrl->panel->dp_mode.bpp;
+	in.pixel_enc = 444;
+	in.dsc_en = 0;
+	in.async_en = 0;
+
+	_dp_ctrl_calc_tu(&in, tu_table);
+}
+
+static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
+{
+	u32 dp_tu = 0x0;
+	u32 valid_boundary = 0x0;
+	u32 valid_boundary2 = 0x0;
+	struct dp_vc_tu_mapping_table tu_calc_table;
+
+	dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
+
+	dp_tu |= tu_calc_table.tu_size_minus1;
+	valid_boundary |= tu_calc_table.valid_boundary_link;
+	valid_boundary |= (tu_calc_table.delay_start_link << 16);
+
+	valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
+	valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
+	valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
+
+	if (tu_calc_table.boundary_moderation_en)
+		valid_boundary2 |= BIT(0);
+
+	pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
+			dp_tu, valid_boundary, valid_boundary2);
+
+	dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
+				dp_tu, valid_boundary, valid_boundary2);
+}
+
+static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!wait_for_completion_timeout(&ctrl->video_comp,
+				WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
+		DRM_ERROR("Link Train timedout\n");
+		ret = -ETIMEDOUT;
+	}
+	return ret;
+}
+
+static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
+{
+	struct dp_link *link = ctrl->link;
+	int ret = 0, lane, lane_cnt;
+	u8 buf[4];
+	u32 max_level_reached = 0;
+	u32 voltage_swing_level = link->phy_params.v_level;
+	u32 pre_emphasis_level = link->phy_params.p_level;
+
+	ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+		voltage_swing_level, pre_emphasis_level);
+	if (ret)
+		return ret;
+
+	if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("max. voltage swing level reached %d\n",
+				voltage_swing_level);
+		max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
+	}
+
+	if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
+				pre_emphasis_level);
+		max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+	}
+
+	pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	lane_cnt = ctrl->link->link_params.num_lanes;
+	for (lane = 0; lane < lane_cnt; lane++)
+		buf[lane] = voltage_swing_level | pre_emphasis_level | max_level_reached;
+
+	DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level | pre_emphasis_level);
+	ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET, buf, lane_cnt);
+	if (ret == lane_cnt)
+		ret = 0;
+
+	return ret;
+}
+
+static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
+		u8 pattern)
+{
+	u8 buf;
+	int ret = 0;
+
+	DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
+
+	buf = pattern;
+	ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET, buf);
+	return ret == 1;
+}
+
+static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
+				    u8 *link_status)
+{
+	int len = 0;
+	u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
+	u32 link_status_read_max_retries = 100;
+
+	while (--link_status_read_max_retries) {
+		len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
+			link_status);
+		if (len != DP_LINK_STATUS_SIZE) {
+			DRM_ERROR("DP link status read failed, err: %d\n", len);
+			return len;
+		}
+
+		if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
+{
+	int tries, old_v_level, ret = 0;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	int const maximum_retries = 5;
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, DP_TRAINING_PATTERN_1);
+	if (ret)
+		return ret;
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
+		DP_LINK_SCRAMBLING_DISABLE);
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	tries = 0;
+	old_v_level = ctrl->link->phy_params.v_level;
+	for (tries = 0; tries < maximum_retries; tries++) {
+		drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_clock_recovery_ok(link_status,
+			ctrl->link->link_params.num_lanes)) {
+			return ret;
+		}
+
+		if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+			DRM_ERROR_RATELIMITED("max v_level reached\n");
+			return -EAGAIN;
+		}
+
+		if (old_v_level != ctrl->link->phy_params.v_level) {
+			tries = 0;
+			old_v_level = ctrl->link->phy_params.v_level;
+		}
+
+		DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	DRM_ERROR("max tries reached\n");
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	switch (ctrl->link->link_params.rate) {
+	case 810000:
+		ctrl->link->link_params.rate = 540000;
+		break;
+	case 540000:
+		ctrl->link->link_params.rate = 270000;
+		break;
+	case 270000:
+	case 162000:
+	default:
+		ctrl->link->link_params.rate = 162000;
+		break;
+	};
+
+	DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
+
+	return ret;
+}
+
+static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
+{
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
+	drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+}
+
+static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
+{
+	int tries = 0, ret = 0;
+	char pattern;
+	int const maximum_retries = 5;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	if (drm_dp_tps3_supported(ctrl->panel->dpcd))
+		pattern = DP_TRAINING_PATTERN_3;
+	else
+		pattern = DP_TRAINING_PATTERN_2;
+
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
+	if (ret)
+		return ret;
+
+	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
+
+	for (tries = 0; tries <= maximum_retries; tries++) {
+		drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_channel_eq_ok(link_status,
+			ctrl->link->link_params.num_lanes))
+			return ret;
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	u8 encoding = DP_SET_ANSI_8B10B;
+	struct drm_dp_link link_info = {0};
+
+	ctrl->link->phy_params.p_level = 0;
+	ctrl->link->phy_params.v_level = 0;
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
+	if (ret < 0) {
+		DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
+		dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+		return ret;
+	}
+
+	drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
+	drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
+				&encoding, 1);
+
+	ret = dp_ctrl_link_train_1(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #1 successful\n");
+
+	ret = dp_ctrl_link_training_2(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #2 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #2 successful\n");
+
+end:
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	dp_ctrl_clear_training_pattern(ctrl);
+	return ret;
+}
+
+static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool train)
+{
+	bool mainlink_ready = false;
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
+	if (ret)
+		return ret;
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		return ret;
+
+	if (train) {
+		/*
+		 * As part of previous calls, DP controller state might have
+		 * transitioned to PUSH_IDLE. In order to start transmitting a link
+		 * training pattern, we have to first do a DP software reset.
+		 */
+		dp_catalog_ctrl_reset(ctrl->catalog);
+
+		ret = dp_ctrl_link_train(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Set up transfer unit values and set controller state to send
+	 * video.
+	 */
+	dp_ctrl_setup_tr_unit(ctrl);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
+
+	ret = dp_ctrl_wait4video_ready(ctrl);
+	if (ret)
+		return ret;
+
+	mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
+	DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT READY");
+	return ret;
+}
+
+static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
+				   char *name, u32 rate)
+{
+	u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
+	struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
+
+	if (num)
+		cfg->rate = rate;
+	else
+		DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
+}
+
+static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_power_set_link_clk_parent(ctrl->power);
+	dp_power_set_pixel_clk_parent(ctrl->power);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk", ctrl->link->link_params.rate);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk", ctrl->dp_ctrl.pixel_rate);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
+	if (ret)
+		DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
+
+	return ret;
+}
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return -EINVAL;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	ctrl->dp_ctrl.orientation = flip;
+
+	dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
+	dp_catalog_ctrl_phy_reset(ctrl->catalog);
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
+
+	return 0;
+}
+
+/**
+ * dp_ctrl_host_deinit() - Uninitialize DP controller
+ * @ctrl: Display Port Driver data
+ *
+ * Perform required steps to uninitialize DP controller
+ * and its resources.
+ */
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+
+	DRM_DEBUG_DP("Host deinitialized successfully\n");
+}
+
+static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
+{
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/*
+	 * For better interop experience, used a fixed NVID=0x8000
+	 * whenever connected to a VGA dongle downstream.
+	 */
+	if (drm_dp_is_branch(dpcd))
+		return (drm_dp_has_quirk(&ctrl->panel->desc,
+				DP_DPCD_QUIRK_CONSTANT_N));
+
+	return false;
+}
+
+static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+		ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+	/*
+	 * Disable and re-enable the mainlink clock since the
+	 * link clock might have been adjusted as part of the
+	 * link maintenance.
+	 */
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+	/* hw recommended delay before re-enabling clocks */
+	msleep(20);
+
+	ret = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (ret) {
+		DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_ctrl_configure_source_params(ctrl);
+	dp_catalog_ctrl_config_msa(ctrl->catalog,
+		ctrl->link->link_params.rate,
+		ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
+	reinit_completion(&ctrl->idle_comp);
+
+	return ret;
+}
+
+static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	int tries, max_tries = 10;
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+
+	for (tries = 0; tries < max_tries; tries++) {
+		ret = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (ret) {
+			DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
+			break;
+		}
+
+		ret = dp_ctrl_setup_main_link(ctrl, true);
+		if (ret == -EAGAIN) /* try with lower link rate */
+			dp_ctrl_link_rate_down_shift(ctrl);
+	}
+	return ret;
+}
+
+static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!ctrl->link->phy_params.phy_test_pattern_sel) {
+		DRM_DEBUG_DP("no test pattern selected by sink\n");
+		return ret;
+	}
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	/*
+	 * The global reset will need DP link related clocks to be
+	 * running. Add the global reset just before disabling the
+	 * link clocks and core clocks.
+	 */
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_ctrl_off(&ctrl->dp_ctrl);
+	if (ret) {
+		DRM_ERROR("failed to disable DP controller\n");
+		return ret;
+	}
+
+	ret = dp_ctrl_on(&ctrl->dp_ctrl);
+	if (ret)
+		DRM_ERROR("failed to enable DP controller\n");
+
+	return ret;
+}
+
+static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private *ctrl)
+{
+	bool success = false;
+	u32 pattern_sent = 0x0;
+	u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
+
+	DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
+
+	if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+			ctrl->link->phy_params.v_level,
+			ctrl->link->phy_params.p_level)) {
+		DRM_ERROR("Failed to set v/p levels\n");
+		return false;
+	}
+	dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
+	dp_link_send_test_response(ctrl->link);
+
+	pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
+
+	switch (pattern_sent) {
+	case MR_LINK_TRAINING1:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_D10_2;
+		break;
+	case MR_LINK_SYMBOL_ERM:
+		success = (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_ERROR_RATE)
+			|| (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_HBR2_EYE);
+		break;
+	case MR_LINK_PRBS7:
+		success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
+		break;
+	case MR_LINK_CUSTOM80:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
+		break;
+	default:
+		success = false;
+	}
+
+	DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
+						pattern_requested);
+	return success;
+}
+
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 sink_request = 0x0;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	sink_request = ctrl->link->sink_request;
+
+	if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
+		if (dp_ctrl_process_phy_test_request(ctrl)) {
+			DRM_ERROR("process phy_test_req failed\n");
+			return;
+		}
+	}
+
+	if (sink_request & DP_LINK_STATUS_UPDATED)
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
+			return;
+		}
+
+
+	if (sink_request & DP_TEST_LINK_TRAINING) {
+		dp_link_send_test_response(ctrl->link);
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
+			return;
+		}
+	}
+}
+
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	u32 rate = 0;
+	u32 link_train_max_retries = 10;
+	u32 const phy_cts_pixel_clk_khz = 148500;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	rate = ctrl->panel->link_info.rate;
+
+	dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
+	dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("using phy test link parameters\n");
+		if (!ctrl->panel->dp_mode.drm_mode.clock)
+			ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
+	} else {
+		ctrl->link->link_params.rate = rate;
+		ctrl->link->link_params.num_lanes =
+			ctrl->panel->link_info.num_lanes;
+		ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+	}
+
+	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
+		ctrl->link->link_params.rate,
+		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
+
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+			ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+
+	rc = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (rc)
+		return rc;
+
+	while (--link_train_max_retries && !atomic_read(&ctrl->dp_ctrl.aborted)) {
+		rc = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (rc) {
+			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
+			break;
+		}
+		rc = dp_ctrl_setup_main_link(ctrl, true);
+		if (!rc)
+			break;
+		/* try with lower link rate */
+		dp_ctrl_link_rate_down_shift(ctrl);
+	}
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		dp_ctrl_send_phy_test_pattern(ctrl);
+
+	return rc;
+}
+
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	int ret = 0;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	DRM_DEBUG_DP("DP off done\n");
+	return ret;
+}
+
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 isr;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
+
+	if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
+		DRM_DEBUG_DP("dp_video_ready\n");
+		complete(&ctrl->video_comp);
+	}
+
+	if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
+		DRM_DEBUG_DP("idle_patterns_sent\n");
+		complete(&ctrl->idle_comp);
+	}
+}
+
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	struct dp_ctrl *dp_ctrl;
+
+	if (!dev || !panel || !aux ||
+	    !link || !catalog) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&ctrl->idle_comp);
+	init_completion(&ctrl->video_comp);
+	mutex_init(&ctrl->push_idle_mutex);
+
+	/* in parameters */
+	ctrl->parser   = parser;
+	ctrl->panel    = panel;
+	ctrl->power    = power;
+	ctrl->aux      = aux;
+	ctrl->link     = link;
+	ctrl->catalog  = catalog;
+	ctrl->dev      = dev;
+
+	dp_ctrl = &ctrl->dp_ctrl;
+
+	return dp_ctrl;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_destroy(&ctrl->push_idle_mutex);
+
+	devm_kfree(ctrl->dev, ctrl);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
new file mode 100644
index 0000000..99ab4b2
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CTRL_H_
+#define _DP_CTRL_H_
+
+#include "dp_aux.h"
+#include "dp_panel.h"
+#include "dp_link.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+
+struct dp_ctrl {
+	bool orientation;
+	atomic_t aborted;
+	u32 pixel_rate;
+};
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser);
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
+
+#endif /* _DP_CTRL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
new file mode 100644
index 0000000..a893542
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/component.h>
+#include <linux/of_irq.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_extcon.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_panel.h"
+#include "dp_ctrl.h"
+#include "dp_display.h"
+#include "dp_drm.h"
+
+static struct msm_dp *g_dp_display;
+#define HPD_STRING_SIZE 30
+
+struct dp_display_private {
+	char *name;
+	int irq;
+
+	/* state variables */
+	bool core_initialized;
+	bool power_on;
+	bool hpd_irq_on;
+	bool audio_supported;
+
+	struct platform_device *pdev;
+	struct dentry *root;
+	struct completion notification_comp;
+
+	struct dp_usbpd   *usbpd;
+	struct dp_parser  *parser;
+	struct dp_power   *power;
+	struct dp_catalog *catalog;
+	struct dp_aux     *aux;
+	struct dp_link    *link;
+	struct dp_panel   *panel;
+	struct dp_ctrl    *ctrl;
+
+	struct dp_usbpd_cb usbpd_cb;
+	struct dp_display_mode dp_mode;
+	struct msm_dp dp_display;
+};
+
+static const struct of_device_id dp_dt_match[] = {
+	{.compatible = "qcom,dp-display"},
+	{}
+};
+
+static irqreturn_t dp_display_irq(int irq, void *dev_id)
+{
+	struct dp_display_private *dp = dev_id;
+
+	if (!dp) {
+		DRM_ERROR("invalid data\n");
+		return IRQ_NONE;
+	}
+
+	/* DP controller isr */
+	dp_ctrl_isr(dp->ctrl);
+
+	/* DP aux isr */
+	dp_aux_isr(dp->aux);
+
+	return IRQ_HANDLED;
+}
+
+static int dp_display_bind(struct device *dev, struct device *master,
+			   void *data)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+	struct drm_device *drm;
+	struct msm_drm_private *priv;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (!dev || !pdev || !master) {
+		DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
+				dev, pdev, master);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	drm = dev_get_drvdata(master);
+	dp = platform_get_drvdata(pdev);
+	if (!drm || !dp) {
+		DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
+				drm, dp);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp->dp_display.drm_dev = drm;
+	priv = drm->dev_private;
+	priv->dp = &(dp->dp_display);
+
+	rc = dp->parser->parse(dp->parser);
+	if (rc) {
+		DRM_ERROR("device tree parsing failed\n");
+		goto end;
+	}
+
+	rc = dp_aux_register(dp->aux);
+	if (rc) {
+		DRM_ERROR("DRM DP AUX register failed\n");
+		goto end;
+	}
+
+	rc = dp_power_client_init(dp->power);
+	if (rc) {
+		DRM_ERROR("Power client create failed\n");
+		goto end;
+	}
+
+end:
+	return rc;
+}
+
+static void dp_display_unbind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct dp_display_private *dp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct msm_drm_private *priv = drm->dev_private;
+
+	if (!dev || !pdev) {
+		DRM_ERROR("invalid param(s)\n");
+		return;
+	}
+
+	dp = platform_get_drvdata(pdev);
+	if (!dp) {
+		DRM_ERROR("Invalid params\n");
+		return;
+	}
+
+	(void)dp_power_client_deinit(dp->power);
+	(void)dp_aux_unregister(dp->aux);
+	priv->dp = NULL;
+}
+
+static const struct component_ops dp_display_comp_ops = {
+	.bind = dp_display_bind,
+	.unbind = dp_display_unbind,
+};
+
+static bool dp_display_is_ds_bridge(struct dp_panel *panel)
+{
+	return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
+		DP_DWN_STRM_PORT_PRESENT);
+}
+
+static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
+{
+	return dp_display_is_ds_bridge(dp->panel) &&
+		(dp->link->sink_count == 0);
+}
+
+static void dp_display_send_hpd_event(struct msm_dp *dp_display)
+{
+	struct dp_display_private *dp;
+	struct drm_connector *connector;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	connector = dp->dp_display.connector;
+	drm_helper_hpd_irq_event(connector->dev);
+}
+
+static int dp_display_send_hpd_notification(struct dp_display_private *dp,
+					    bool hpd)
+{
+	static bool encoder_mode_set = false;
+	struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
+	struct msm_kms *kms = priv->kms;
+
+	mutex_lock(&dp->dp_display.connect_mutex);
+	if ((hpd && dp->dp_display.is_connected) ||
+			(!hpd && !dp->dp_display.is_connected)) {
+		DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return 0;
+	}
+
+	/* reset video pattern flag on disconnect */
+	if (!hpd)
+		dp->panel->video_test = false;
+
+	dp->dp_display.is_connected = hpd;
+	reinit_completion(&dp->notification_comp);
+
+	if (dp->dp_display.is_connected && dp->dp_display.encoder
+				&& !encoder_mode_set
+				&& kms->funcs->set_encoder_mode) {
+		kms->funcs->set_encoder_mode(kms,
+				dp->dp_display.encoder, false);
+		DRM_DEBUG_DP("set_encoder_mode() Completed\n");
+		encoder_mode_set = true;
+	}
+
+	dp_display_send_hpd_event(&dp->dp_display);
+
+	if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
+		pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&dp->dp_display.connect_mutex);
+	return 0;
+}
+
+static int dp_display_process_hpd_high(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct edid *edid;
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	if (dp->link->psm_enabled)
+		goto notify;
+
+	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
+	if (rc)
+		goto notify;
+
+	dp_link_process_request(dp->link);
+
+	if (dp_display_is_sink_count_zero(dp)) {
+		DRM_DEBUG_DP("no downstream devices connected\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	edid = dp->panel->edid;
+
+	dp->audio_supported = drm_detect_monitor_audio(edid);
+
+	dp_panel_handle_sink_request(dp->panel);
+
+	dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
+notify:
+	dp_display_send_hpd_notification(dp, true);
+
+end:
+	return rc;
+}
+
+static void dp_display_host_init(struct dp_display_private *dp)
+{
+	bool flip = false;
+
+	if (dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already initialized\n");
+		return;
+	}
+
+	if (dp->usbpd->orientation == ORIENTATION_CC2)
+		flip = true;
+
+	dp_power_init(dp->power, flip);
+	dp_ctrl_host_init(dp->ctrl, flip);
+	enable_irq(dp->irq);
+	dp->core_initialized = true;
+}
+
+static void dp_display_host_deinit(struct dp_display_private *dp)
+{
+	if (!dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already off\n");
+		return;
+	}
+
+	dp_ctrl_host_deinit(dp->ctrl);
+	dp_aux_deinit(dp->aux);
+	dp_power_deinit(dp->power);
+	disable_irq(dp->irq);
+	dp->core_initialized = false;
+}
+
+static void dp_display_process_hpd_low(struct dp_display_private *dp)
+{
+	dp_display_send_hpd_notification(dp, false);
+
+	dp_aux_deinit(dp->aux);
+}
+
+static int dp_display_usbpd_configure_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	dp_display_host_init(dp);
+
+	if (dp->usbpd->hpd_high)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_clean(struct dp_display_private *dp)
+{
+	dp_ctrl_push_idle(dp->ctrl);
+	dp_ctrl_off(dp->ctrl);
+}
+
+static int dp_display_usbpd_disconnect_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	rc = dp_display_send_hpd_notification(dp, false);
+
+	/* if cable is disconnected, reset psm_enabled flag */
+	if (!dp->usbpd->alt_mode_cfg_done)
+		dp->link->psm_enabled = false;
+
+	if ((rc < 0) && dp->power_on)
+		dp_display_clean(dp);
+
+	dp_display_host_deinit(dp);
+end:
+	return rc;
+}
+
+static void dp_display_handle_video_request(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
+		/* force disconnect followed by connect */
+		dp->usbpd->connect(dp->usbpd, false);
+		dp->panel->video_test = true;
+		dp->usbpd->connect(dp->usbpd, true);
+		dp_link_send_test_response(dp->link);
+	}
+}
+
+static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
+		dp_display_send_hpd_notification(dp, false);
+
+		if (dp_display_is_sink_count_zero(dp)) {
+			DRM_DEBUG_DP("sink count is zero, nothing to do\n");
+			return 0;
+		}
+
+		return dp_display_process_hpd_high(dp);
+	}
+
+	dp_ctrl_handle_sink_request(dp->ctrl);
+
+	dp_display_handle_video_request(dp);
+
+	return 0;
+}
+
+static int dp_display_usbpd_attention_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		return -EINVAL;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		return -ENODEV;
+	}
+
+	if (dp->usbpd->hpd_irq) {
+		dp->hpd_irq_on = true;
+
+		rc = dp_link_process_request(dp->link);
+		/* check for any test request issued by sink */
+		if (!rc)
+			dp_display_handle_hpd_irq(dp);
+
+		dp->hpd_irq_on = false;
+		goto end;
+	}
+
+	if (!dp->usbpd->hpd_high) {
+		dp_display_process_hpd_low(dp);
+		goto end;
+	}
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
+{
+	dp_ctrl_put(dp->ctrl);
+	dp_link_put(dp->link);
+	dp_panel_put(dp->panel);
+	dp_aux_put(dp->aux);
+	dp_power_put(dp->power);
+	dp_catalog_put(dp->catalog);
+	dp_parser_put(dp->parser);
+}
+
+static int dp_init_sub_modules(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct device *dev = &dp->pdev->dev;
+	struct dp_usbpd_cb *cb = &dp->usbpd_cb;
+	struct dp_panel_in panel_in = {
+		.dev = dev,
+	};
+
+	/* Callback APIs used for cable status change event */
+	cb->configure  = dp_display_usbpd_configure_cb;
+	cb->disconnect = dp_display_usbpd_disconnect_cb;
+	cb->attention  = dp_display_usbpd_attention_cb;
+
+	dp->parser = dp_parser_get(dp->pdev);
+	if (IS_ERR(dp->parser)) {
+		rc = PTR_ERR(dp->parser);
+		DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
+		dp->parser = NULL;
+		goto error_parser;
+	}
+
+	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
+	if (IS_ERR(dp->catalog)) {
+		rc = PTR_ERR(dp->catalog);
+		DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
+		dp->catalog = NULL;
+		goto error_catalog;
+	}
+
+	dp->power = dp_power_get(dp->parser);
+	if (IS_ERR(dp->power)) {
+		rc = PTR_ERR(dp->power);
+		DRM_ERROR("failed to initialize power, rc = %d\n", rc);
+		dp->power = NULL;
+		goto error_power;
+	}
+
+	dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
+	if (IS_ERR(dp->aux)) {
+		rc = PTR_ERR(dp->aux);
+		DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
+		dp->aux = NULL;
+		goto error_aux;
+	}
+
+	dp->link = dp_link_get(dev, dp->aux);
+	if (IS_ERR(dp->link)) {
+		rc = PTR_ERR(dp->link);
+		DRM_ERROR("failed to initialize link, rc = %d\n", rc);
+		dp->link = NULL;
+		goto error_link;
+	}
+
+	panel_in.aux = dp->aux;
+	panel_in.catalog = dp->catalog;
+	panel_in.link = dp->link;
+
+	dp->panel = dp_panel_get(&panel_in);
+	if (IS_ERR(dp->panel)) {
+		rc = PTR_ERR(dp->panel);
+		DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
+		dp->panel = NULL;
+		goto error_panel;
+	}
+
+	dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
+			       dp->power, dp->catalog, dp->parser);
+	if (IS_ERR(dp->ctrl)) {
+		rc = PTR_ERR(dp->ctrl);
+		DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
+		dp->ctrl = NULL;
+		goto error_ctrl;
+	}
+
+	return rc;
+error_ctrl:
+	dp_panel_put(dp->panel);
+error_panel:
+	dp_link_put(dp->link);
+error_link:
+	dp_aux_put(dp->aux);
+error_aux:
+	dp_power_put(dp->power);
+error_power:
+	dp_catalog_put(dp->catalog);
+error_catalog:
+	dp_parser_put(dp->parser);
+error_parser:
+	return rc;
+}
+
+static int dp_display_set_mode(struct msm_dp *dp_display,
+			       struct dp_display_mode *mode)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	dp->panel->dp_mode.bpp = mode->bpp;
+	dp->panel->dp_mode.capabilities = mode->capabilities;
+	dp_panel_init_panel_info(dp->panel);
+	return rc;
+}
+
+static int dp_display_prepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+static int dp_display_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->power_on) {
+		DRM_DEBUG_DP("Link already setup, return\n");
+		return 0;
+	}
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	rc = dp_ctrl_on(dp->ctrl);
+	if (!rc)
+		dp->power_on = true;
+
+	return rc;
+}
+
+static int dp_display_post_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	complete_all(&dp->notification_comp);
+	return rc;
+}
+
+static int dp_display_pre_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_link_psm_config(dp->link, &dp->panel->link_info, true);
+
+	dp_ctrl_push_idle(dp->ctrl);
+	return rc;
+}
+
+static int dp_display_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (!dp->power_on || !dp->core_initialized)
+		goto error;
+
+	dp_ctrl_off(dp->ctrl);
+
+	dp->power_on = false;
+
+	complete_all(&dp->notification_comp);
+error:
+	return rc;
+}
+
+int dp_display_request_irq(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dp_display) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
+	if (dp->irq < 0) {
+		rc = dp->irq;
+		DRM_ERROR("failed to get irq: %d\n", rc);
+		return rc;
+	}
+
+	rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
+		IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
+	if (rc < 0) {
+		DRM_ERROR("failed to request IRQ%u: %d\n",
+				dp->irq, rc);
+		return rc;
+	}
+	disable_irq(dp->irq);
+
+	return 0;
+}
+
+static int dp_display_unprepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
+{
+	const u32 num_components = 3, default_bpp = 24;
+	struct dp_display_private *dp_display;
+	struct drm_dp_link *link_info;
+	u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
+
+	if (!dp || !mode_pclk_khz || !dp->connector) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	link_info = &dp_display->panel->link_info;
+
+	mode_bpp = dp->connector->display_info.bpc * num_components;
+	if (!mode_bpp)
+		mode_bpp = default_bpp;
+
+	mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
+			mode_bpp, mode_pclk_khz);
+
+	mode_rate_khz = mode_pclk_khz * mode_bpp;
+	supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	if (mode_rate_khz > supported_rate_khz)
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+int dp_display_get_modes(struct msm_dp *dp,
+				struct dp_display_mode *dp_mode)
+{
+	struct dp_display_private *dp_display;
+	int ret = 0;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	ret = dp_panel_get_modes(dp_display->panel,
+		dp->connector, dp_mode);
+	if (dp_mode->drm_mode.clock)
+		dp->max_pclk_khz = dp_mode->drm_mode.clock;
+	return ret;
+}
+
+bool dp_display_check_video_test(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return false;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	if (dp_display->panel->video_test)
+		return true;
+
+	return false;
+}
+
+int dp_display_get_test_bpp(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	return dp_link_bit_depth_to_bpp(
+		dp_display->link->test_video.test_bit_depth);
+}
+
+static int dp_display_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!pdev || !pdev->dev.of_node) {
+		DRM_ERROR("pdev not found\n");
+		return -ENODEV;
+	}
+
+	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	init_completion(&dp->notification_comp);
+
+	dp->pdev = pdev;
+	dp->name = "drm_dp";
+
+	rc = dp_init_sub_modules(dp);
+	if (rc) {
+		DRM_ERROR("init sub module failed\n");
+		devm_kfree(&pdev->dev, dp);
+		return -EPROBE_DEFER;
+	}
+
+	platform_set_drvdata(pdev, dp);
+
+	mutex_init(&dp->dp_display.connect_mutex);
+	g_dp_display = &dp->dp_display;
+
+	rc = component_add(&pdev->dev, &dp_display_comp_ops);
+	if (rc) {
+		DRM_ERROR("component add failed, rc=%d\n", rc);
+		dp_display_deinit_sub_modules(dp);
+		devm_kfree(&pdev->dev, dp);
+	}
+
+	return rc;
+}
+
+static int dp_display_remove(struct platform_device *pdev)
+{
+	struct dp_display_private *dp;
+
+	if (!pdev)
+		return -EINVAL;
+
+	dp = platform_get_drvdata(pdev);
+
+	dp_display_deinit_sub_modules(dp);
+
+	platform_set_drvdata(pdev, NULL);
+	devm_kfree(&pdev->dev, dp);
+
+	return 0;
+}
+
+static struct platform_driver dp_display_driver = {
+	.probe  = dp_display_probe,
+	.remove = dp_display_remove,
+	.driver = {
+		.name = "msm-dp-display",
+		.of_match_table = dp_dt_match,
+	},
+};
+
+int __init msm_dp_register(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&dp_display_driver);
+	if (ret) {
+		DRM_ERROR("driver register failed");
+		return ret;
+	}
+
+	return ret;
+}
+
+void __exit msm_dp_unregister(void)
+{
+	platform_driver_unregister(&dp_display_driver);
+}
+
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			struct drm_encoder *encoder)
+{
+	struct msm_drm_private *priv;
+	int ret;
+
+	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
+		return -EINVAL;
+
+	priv = dev->dev_private;
+	dp_display->drm_dev = dev;
+
+	ret = dp_display_request_irq(dp_display);
+	if (ret) {
+		DRM_ERROR("request_irq failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_display->encoder = encoder;
+
+	dp_display->connector = dp_drm_connector_init(dp_display);
+	if (IS_ERR(dp_display->connector)) {
+		ret = PTR_ERR(dp_display->connector);
+		DRM_DEV_ERROR(dev->dev,
+			"failed to create dp connector: %d\n", ret);
+		dp_display->connector = NULL;
+		return ret;
+	}
+
+	priv->connectors[priv->num_connectors++] = dp_display->connector;
+	return 0;
+}
+
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	if (!dp_display->dp_mode.drm_mode.clock) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
+	if (rc) {
+		DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_prepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display enable failed, rc=%d\n", rc);
+		dp_display_unprepare(dp);
+		return rc;
+	}
+
+	rc = dp_display_post_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
+		dp_display_disable(dp);
+		dp_display_unprepare(dp);
+	}
+	return rc;
+}
+
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+
+	rc = dp_display_pre_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_unprepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
+	}
+	return rc;
+}
+
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
+
+	if (dp_display_check_video_test(dp))
+		dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
+	else /* Default num_components per pixel = 3 */
+		dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
+
+	if (!dp_display->dp_mode.bpp)
+		dp_display->dp_mode.bpp = 24; /* Default bpp */
+
+	drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
+
+	dp_display->dp_mode.v_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
+
+	dp_display->dp_mode.h_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
new file mode 100644
index 0000000..c916408
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DISPLAY_H_
+#define _DP_DISPLAY_H_
+
+#include <drm/drmP.h>
+
+#include "dp_panel.h"
+
+struct msm_dp {
+	struct drm_device *drm_dev;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	bool is_connected;
+	struct mutex connect_mutex;
+	u32 max_pclk_khz;
+};
+
+int dp_display_validate_mode(struct msm_dp *dp_display, u32 mode_pclk_khz);
+int dp_display_get_modes(struct msm_dp *dp_display,
+		struct dp_display_mode *dp_mode);
+int dp_display_request_irq(struct msm_dp *dp_display);
+bool dp_display_check_video_test(struct msm_dp *dp_display);
+int dp_display_get_test_bpp(struct msm_dp *dp_display);
+
+#endif /* _DP_DISPLAY_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
new file mode 100644
index 0000000..a72b0bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp]: %s: " fmt, __func__
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_crtc.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_drm.h"
+
+struct dp_connector {
+	struct drm_connector base;
+	struct msm_dp *dp_display;
+};
+#define to_dp_connector(x) container_of(x, struct dp_connector, base)
+
+/**
+ * dp_connector_detect - callback to determine if connector is connected
+ * @connector: Pointer to drm connector structure
+ * @force: Force detect setting from drm framework
+ * Returns: Connector 'is connected' status
+ */
+static enum drm_connector_status dp_connector_detect(struct drm_connector *conn,
+		bool force)
+{
+	struct msm_dp *dp;
+
+	dp = to_dp_connector(conn)->dp_display;
+
+	DRM_DEBUG_DP("is_connected = %s\n",
+		(dp->is_connected) ? "true" : "false");
+
+	return (dp->is_connected) ? connector_status_connected :
+					connector_status_disconnected;
+}
+
+/**
+ * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add()
+ * @connector: Pointer to drm connector structure
+ * Returns: Number of modes added
+ */
+static int dp_connector_get_modes(struct drm_connector *connector)
+{
+	int rc = 0;
+	struct msm_dp *dp;
+	struct dp_display_mode *dp_mode = NULL;
+	struct drm_display_mode *m, drm_mode;
+
+	if (!connector)
+		return 0;
+
+	dp = to_dp_connector(connector)->dp_display;
+
+	dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
+	if (!dp_mode)
+		return 0;
+
+	mutex_lock(&dp->connect_mutex);
+	/* pluggable case assumes EDID is read when HPD */
+	if (dp->is_connected) {
+		/*
+		 *The get_modes() function might return one mode that is stored
+		 * in dp_mode when compliance test is in progress. If not, the
+		 * return value is equal to the total number of modes supported
+		 * by the sink
+		 */
+		rc = dp_display_get_modes(dp, dp_mode);
+		if (rc <= 0) {
+			DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
+			mutex_unlock(&dp->connect_mutex);
+			return rc;
+		}
+		if (dp_mode->drm_mode.clock) { /* valid DP mode */
+			memset(&drm_mode, 0x0, sizeof(drm_mode));
+			drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
+			m = drm_mode_duplicate(connector->dev, &drm_mode);
+			if (!m) {
+				DRM_ERROR("failed to add mode %ux%u\n",
+				       drm_mode.hdisplay,
+				       drm_mode.vdisplay);
+				kfree(dp_mode);
+				mutex_unlock(&dp->connect_mutex);
+				return 0;
+			}
+			drm_mode_probed_add(connector, m);
+		}
+	} else {
+		DRM_DEBUG_DP("No sink connected\n");
+	}
+	mutex_unlock(&dp->connect_mutex);
+	kfree(dp_mode);
+	return rc;
+}
+
+/**
+ * dp_connector_mode_valid - callback to determine if specified mode is valid
+ * @connector: Pointer to drm connector structure
+ * @mode: Pointer to drm mode structure
+ * Returns: Validity status for specified mode
+ */
+static enum drm_mode_status dp_connector_mode_valid(struct drm_connector *connector,
+		struct drm_display_mode *mode)
+{
+	struct msm_dp *dp_disp;
+
+	if (!mode || !connector) {
+		DRM_ERROR("invalid params\n");
+		return MODE_ERROR;
+	}
+
+	dp_disp = to_dp_connector(connector)->dp_display;
+
+	mode->vrefresh = drm_mode_vrefresh(mode);
+
+	if ((dp_disp->max_pclk_khz <= 0) ||
+			(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
+			(mode->clock > dp_disp->max_pclk_khz))
+		return MODE_BAD;
+
+	return dp_display_validate_mode(dp_disp, mode->clock);
+}
+
+static const struct drm_connector_funcs dp_connector_funcs = {
+	.detect = dp_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs dp_connector_helper_funcs = {
+	.get_modes = dp_connector_get_modes,
+	.mode_valid = dp_connector_mode_valid,
+};
+
+/* connector initialization */
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
+{
+	struct drm_connector *connector = NULL;
+	struct dp_connector *dp_connector;
+	int ret;
+
+	dp_connector = devm_kzalloc(dp_display->drm_dev->dev, sizeof(*dp_connector),
+				    GFP_KERNEL);
+	if (!dp_connector)
+		return ERR_PTR(-ENOMEM);
+
+	dp_connector->dp_display = dp_display;
+
+	connector = &dp_connector->base;
+
+	ret = drm_connector_init(dp_display->drm_dev, connector, &dp_connector_funcs,
+			DRM_MODE_CONNECTOR_DisplayPort);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_connector_helper_add(connector, &dp_connector_helper_funcs);
+
+	/*
+	 * Enable HPD to let hpd event is handled when cable is attached to the host.
+	 */
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_attach_encoder(connector, dp_display->encoder);
+
+	return connector;
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
new file mode 100644
index 0000000..cf472c5
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DRM_H_
+#define _DP_DRM_H_
+
+#include <linux/types.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "msm_drv.h"
+#include "dp_display.h"
+
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display);
+
+#endif /* _DP_DRM_H_ */
+
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c b/drivers/gpu/drm/msm/dp/dp_extcon.c
new file mode 100644
index 0000000..0fb34ef
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/extcon.h>
+#include <drm/drmP.h>
+
+#include "dp_extcon.h"
+
+/* DP specific VDM commands */
+#define DP_USBPD_VDM_STATUS	0x10
+#define DP_USBPD_VDM_CONFIGURE	0x11
+
+/* USBPD-TypeC specific Macros */
+#define VDM_VERSION		0x0
+#define USB_C_DP_SID		0xFF01
+
+struct dp_extcon_private {
+	u32 vdo;
+	struct device *dev;
+	struct notifier_block extcon_nb;
+	struct extcon_dev *extcon;
+	struct workqueue_struct *extcon_wq;
+	struct work_struct event_work;
+	struct usbpd *pd;
+	struct dp_usbpd_cb *dp_cb;
+	struct dp_usbpd dp_usbpd;
+};
+
+static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
+{
+	int rc = 0;
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	dp_usbpd->hpd_high = hpd;
+
+	if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
+				&& !extcon_priv->dp_cb->disconnect) {
+		DRM_ERROR("extcon dp_cb not initialized\n");
+		return -EINVAL;
+	}
+	if (hpd)
+		extcon_priv->dp_cb->configure(extcon_priv->dev);
+	else
+		extcon_priv->dp_cb->disconnect(extcon_priv->dev);
+
+	return rc;
+}
+
+static void dp_extcon_event_work(struct work_struct *work)
+{
+	struct dp_extcon_private *extcon_priv;
+	int dp_state, ret;
+	union extcon_property_value property;
+
+	extcon_priv = container_of(work,
+			struct dp_extcon_private, event_work);
+
+	if (!extcon_priv || !extcon_priv->extcon) {
+		DRM_ERROR("Invalid extcon device handler\n");
+		return;
+	}
+
+	dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
+
+	if (dp_state > 0) {
+		ret = extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_TYPEC_POLARITY,
+					&property);
+		if (ret) {
+			DRM_ERROR("Get Polarity property failed\n");
+			return;
+		}
+		extcon_priv->dp_usbpd.orientation =
+			(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
+
+		extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_SS,
+					&property);
+		extcon_priv->dp_usbpd.multi_func =
+				((property.intval) ? true : false);
+
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
+		if (ret) {
+			DRM_ERROR("extcon_connect->true failed\n");
+			return;
+		}
+	} else {
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
+		if (ret) {
+			DRM_ERROR("extcon_connect->false failed\n");
+			return;
+		}
+	}
+}
+
+static int dp_extcon_event_notify(struct notifier_block *nb,
+				  unsigned long event, void *priv)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(nb, struct dp_extcon_private,
+						extcon_nb);
+
+	queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
+	return NOTIFY_DONE;
+}
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+	int ret = 0;
+
+	if (!dp_usbpd)
+		return -EINVAL;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
+	ret = devm_extcon_register_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+	if (ret) {
+		DRM_DEV_ERROR(extcon_priv->dev,
+			"register EXTCON_DISP_DP notifier err\n");
+		ret = -EINVAL;
+		return ret;
+	}
+
+	extcon_priv->extcon_wq = create_singlethread_workqueue("drm_dp_extcon");
+	if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
+		DRM_ERROR("Failed to create workqueue\n");
+		dp_extcon_unregister(dp_usbpd);
+		return -EPERM;
+	}
+
+	INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
+	return ret;
+}
+
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	if (!dp_usbpd) {
+		DRM_ERROR("Invalid input\n");
+		return;
+	}
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_extcon_unregister_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+
+	if (extcon_priv->extcon_wq)
+		destroy_workqueue(extcon_priv->extcon_wq);
+
+	return;
+}
+
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb)
+{
+	int rc = 0;
+	struct dp_extcon_private *dp_extcon;
+	struct dp_usbpd *dp_usbpd;
+
+	if (!cb) {
+		DRM_ERROR("invalid cb data\n");
+		rc = -EINVAL;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
+	if (!dp_extcon) {
+		rc = -ENOMEM;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (!dp_extcon->extcon) {
+		DRM_ERROR("invalid extcon data\n");
+		rc = -EINVAL;
+		devm_kfree(dev, dp_extcon);
+		return ERR_PTR(rc);
+        }
+
+	dp_extcon->dev = dev;
+	dp_extcon->dp_cb = cb;
+
+	dp_extcon->dp_usbpd.connect = dp_extcon_connect;
+	dp_usbpd = &dp_extcon->dp_usbpd;
+
+	return dp_usbpd;
+}
+
+void dp_extcon_put(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon;
+
+	if (!dp_usbpd)
+		return;
+
+	extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_kfree(extcon->dev, extcon);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h b/drivers/gpu/drm/msm/dp/dp_extcon.h
new file mode 100644
index 0000000..c6c3051
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_EXTCON_H_
+#define _DP_EXTCON_H_
+
+//#include <linux/usb/usbpd.h>
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+enum plug_orientation {
+	ORIENTATION_NONE,
+	ORIENTATION_CC1,
+	ORIENTATION_CC2,
+};
+
+/**
+ * struct dp_usbpd - DisplayPort status
+ *
+ * @orientation: plug orientation configuration
+ * @low_pow_st: low power state
+ * @adaptor_dp_en: adaptor functionality enabled
+ * @multi_func: multi-function preferred
+ * @usb_config_req: request to switch to usb
+ * @exit_dp_mode: request exit from displayport mode
+ * @hpd_high: Hot Plug Detect signal is high.
+ * @hpd_irq: Change in the status since last message
+ * @alt_mode_cfg_done: bool to specify alt mode status
+ * @debug_en: bool to specify debug mode
+ * @connect: simulate disconnect or connect for debug mode
+ */
+struct dp_usbpd {
+	enum plug_orientation orientation;
+	bool low_pow_st;
+	bool adaptor_dp_en;
+	bool multi_func;
+	bool usb_config_req;
+	bool exit_dp_mode;
+	bool hpd_high;
+	bool hpd_irq;
+	bool alt_mode_cfg_done;
+	bool debug_en;
+
+	int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
+};
+
+/**
+ * struct dp_usbpd_cb - callback functions provided by the client
+ *
+ * @configure: called by usbpd module when PD communication has
+ * been completed and the usb peripheral has been configured on
+ * dp mode.
+ * @disconnect: notify the cable disconnect issued by usb.
+ * @attention: notify any attention message issued by usb.
+ */
+struct dp_usbpd_cb {
+	int (*configure)(struct device *dev);
+	int (*disconnect)(struct device *dev);
+	int (*attention)(struct device *dev);
+};
+
+/**
+ * dp_extcon_get() - setup usbpd module
+ *
+ * @dev: device instance of the caller
+ * @cb: struct containing callback function pointers.
+ *
+ * This function allows the client to initialize the usbpd
+ * module. The module will communicate with usb driver and
+ * handles the power delivery (PD) communication with the
+ * sink/usb device. This module will notify the client using
+ * the callback functions about the connection and status.
+ */
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb);
+
+void dp_extcon_put(struct dp_usbpd *pd);
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd);
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
+
+#endif /* _DP_EXTCON_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
new file mode 100644
index 0000000..9f5b7bc8
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_link.h"
+#include "dp_panel.h"
+
+#define DP_TEST_REQUEST_MASK		0x7F
+
+enum audio_sample_rate {
+	AUDIO_SAMPLE_RATE_32_KHZ	= 0x00,
+	AUDIO_SAMPLE_RATE_44_1_KHZ	= 0x01,
+	AUDIO_SAMPLE_RATE_48_KHZ	= 0x02,
+	AUDIO_SAMPLE_RATE_88_2_KHZ	= 0x03,
+	AUDIO_SAMPLE_RATE_96_KHZ	= 0x04,
+	AUDIO_SAMPLE_RATE_176_4_KHZ	= 0x05,
+	AUDIO_SAMPLE_RATE_192_KHZ	= 0x06,
+};
+
+enum audio_pattern_type {
+	AUDIO_TEST_PATTERN_OPERATOR_DEFINED	= 0x00,
+	AUDIO_TEST_PATTERN_SAWTOOTH		= 0x01,
+};
+
+struct dp_link_request {
+	u32 test_requested;
+	u32 test_link_rate;
+	u32 test_lane_count;
+};
+
+struct dp_link_private {
+	u32 prev_sink_count;
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link dp_link;
+
+	struct dp_link_request request;
+	struct mutex test_response_mutex;
+	struct mutex psm_mutex;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+};
+
+static int dp_link_get_period(struct dp_link_private *link, int const addr)
+{
+	int ret = 0;
+	u8 data;
+	u32 const max_audio_period = 0xA;
+
+	/* TEST_AUDIO_PERIOD_CH_XX */
+	if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
+		DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Period - Bits 3:0 */
+	data = data & 0xF;
+	if ((int)data > max_audio_period) {
+		DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = data;
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_channel_period(struct dp_link_private *link)
+{
+	int ret = 0;
+	struct dp_link_test_audio *req = &link->dp_link.test_audio;
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_1 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_2 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
+
+	/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_3 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_4 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_5 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_6 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_7 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_8 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_pattern_type(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_pattern_type = 0x1;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_TEST_AUDIO_PATTERN_TYPE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Audio Pattern Type - Bits 7:0 */
+	if ((int)data > max_audio_pattern_type) {
+		DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_pattern_type = data;
+	DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_mode(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_sampling_rate = 0x6;
+	int const max_audio_channel_count = 0x8;
+	int sampling_rate = 0x0;
+	int channel_count = 0x0;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Sampling Rate - Bits 3:0 */
+	sampling_rate = data & 0xF;
+	if (sampling_rate > max_audio_sampling_rate) {
+		DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
+				sampling_rate, max_audio_sampling_rate);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Channel Count - Bits 7:4 */
+	channel_count = ((data & 0xF0) >> 4) + 1;
+	if (channel_count > max_audio_channel_count) {
+		DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
+				channel_count, max_audio_channel_count);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
+	link->dp_link.test_audio.test_audio_channel_count = channel_count;
+	DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
+					sampling_rate, channel_count);
+exit:
+	return ret;
+}
+
+/**
+ * dp_parse_audio_pattern_params() - parses audio pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the audio link pattern parameters.
+ */
+static int dp_link_parse_audio_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	ret = dp_link_parse_audio_mode(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_pattern_type(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_channel_period(link);
+
+exit:
+	return ret;
+}
+
+/**
+ * dp_link_is_video_pattern_valid() - validates the video pattern
+ * @pattern: video pattern requested by the sink
+ *
+ * Returns true if the requested video pattern is supported.
+ */
+static bool dp_link_is_video_pattern_valid(u32 pattern)
+{
+	switch (pattern) {
+	case DP_NO_TEST_PATTERN:
+	case DP_COLOR_RAMP:
+	case DP_BLACK_AND_WHITE_VERTICAL_LINES:
+	case DP_COLOR_SQUARE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * dp_link_is_bit_depth_valid() - validates the bit depth requested
+ * @bit_depth: bit depth requested by the sink
+ *
+ * Returns true if the requested bit depth is supported.
+ */
+static bool dp_link_is_bit_depth_valid(u32 tbd)
+{
+	/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+	case DP_TEST_BIT_DEPTH_8:
+	case DP_TEST_BIT_DEPTH_10:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int dp_link_parse_timing_params1(struct dp_link_private *link,
+					int addr, int len, u32 *val)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val = bp[1] | (bp[0] << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params2(struct dp_link_private *link,
+					int addr, int len,
+					u32 *val1, u32 *val2)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val1 = (bp[0] & BIT(7)) >> 7;
+	*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params3(struct dp_link_private *link,
+					int addr, u32 *val)
+{
+	u8 bp;
+	u32 len = 1;
+	int rlen;
+
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
+	if (rlen < 1) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+	*val = bp;
+
+	return 0;
+}
+
+/**
+ * dp_parse_video_pattern_params() - parses video pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the video link pattern and the link
+ * bit depth requested by the sink and, and if the values parsed are valid.
+ */
+static int dp_link_parse_video_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+	ssize_t rlen;
+	u8 bp;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!dp_link_is_video_pattern_valid(bp)) {
+		DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_video_pattern = bp;
+
+	/* Read the requested color bit depth and dynamic range (Byte 0x232) */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Dynamic Range */
+	link->dp_link.test_video.test_dyn_range = (bp & DP_TEST_DYNAMIC_RANGE_CEA);
+
+	/* Color bit depth */
+	bp &= DP_TEST_BIT_DEPTH_MASK;
+	if (!dp_link_is_bit_depth_valid(bp)) {
+		DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_bit_depth = bp;
+
+	/* resolution timing params */
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_h_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_v_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
+			&link->dp_link.test_video.test_h_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
+			&link->dp_link.test_video.test_v_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
+			&link->dp_link.test_video.test_hsync_pol,
+			&link->dp_link.test_video.test_hsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
+			&link->dp_link.test_video.test_vsync_pol,
+			&link->dp_link.test_video.test_vsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
+			&link->dp_link.test_video.test_h_width);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
+			&link->dp_link.test_video.test_v_height);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
+		&link->dp_link.test_video.test_rr_d);
+	link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR,
+		&link->dp_link.test_video.test_rr_n);
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_n (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
+		return ret;
+	}
+
+	DRM_DEBUG_DP("link video pattern = 0x%x\n" \
+		"link dynamic range = 0x%x\n" \
+		"link bit depth = 0x%x\n" \
+		"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
+		"TEST_H_START = %d, TEST_V_START = %d\n" \
+		"TEST_HSYNC_POL = %d\n" \
+		"TEST_HSYNC_WIDTH = %d\n" \
+		"TEST_VSYNC_POL = %d\n" \
+		"TEST_VSYNC_WIDTH = %d\n" \
+		"TEST_H_WIDTH = %d\n" \
+		"TEST_V_HEIGHT = %d\n" \
+		"TEST_REFRESH_DENOMINATOR = %d\n" \
+		 "TEST_REFRESH_NUMERATOR = %d\n",
+		link->dp_link.test_video.test_video_pattern,
+		link->dp_link.test_video.test_dyn_range,
+		link->dp_link.test_video.test_bit_depth,
+		link->dp_link.test_video.test_h_total,
+		link->dp_link.test_video.test_v_total,
+		link->dp_link.test_video.test_h_start,
+		link->dp_link.test_video.test_v_start,
+		link->dp_link.test_video.test_hsync_pol,
+		link->dp_link.test_video.test_hsync_width,
+		link->dp_link.test_video.test_vsync_pol,
+		link->dp_link.test_video.test_vsync_width,
+		link->dp_link.test_video.test_h_width,
+		link->dp_link.test_video.test_v_height,
+		link->dp_link.test_video.test_rr_d,
+		link->dp_link.test_video.test_rr_n);
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_link_training_params() - parses link training parameters from
+ * DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane
+ * count (Byte 0x220), and if these values parse are valid.
+ */
+static int dp_link_parse_link_training_params(struct dp_link_private *link)
+{
+	u8 bp;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,	&bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!is_link_rate_valid(bp)) {
+		DRM_ERROR("invalid link rate = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_link_rate = bp;
+	DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
+		return rlen;
+	}
+	bp &= DP_MAX_LANE_COUNT_MASK;
+
+	if (!is_lane_count_valid(bp)) {
+		DRM_ERROR("invalid lane count = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_lane_count = bp;
+	DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
+	return 0;
+}
+
+/**
+ * dp_parse_phy_test_params() - parses the phy link parameters
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being
+ * requested.
+ */
+static int dp_link_parse_phy_test_params(struct dp_link_private *link)
+{
+	u8 data;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	link->dp_link.phy_params.phy_test_pattern_sel = data;
+
+	DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
+
+	switch (data) {
+	case DP_LINK_QUAL_PATTERN_DISABLE:
+	case DP_LINK_QUAL_PATTERN_D10_2:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * dp_link_is_video_audio_test_requested() - checks for audio/video link request
+ * @link: link requested by the sink
+ *
+ * Returns true if the requested link is a permitted audio/video link.
+ */
+static bool dp_link_is_video_audio_test_requested(u32 link)
+{
+	u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
+				DP_TEST_LINK_AUDIO_PATTERN |
+				DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+
+	return ((link & video_audio_test) &&
+		!(link & ~video_audio_test));
+}
+
+/**
+ * dp_link_parse_request() - parses link request parameters from sink
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD to check if an automated link is requested (Byte 0x201),
+ * and what type of link automation is being requested (Byte 0x218).
+ */
+static int dp_link_parse_request(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+
+	/**
+	 * Read the device service IRQ vector (Byte 0x201) to determine
+	 * whether an automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
+
+	if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
+		DRM_DEBUG_DP("no test requested\n");
+		return 0;
+	}
+
+	/**
+	 * Read the link request byte (Byte 0x218) to determine what type
+	 * of automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
+		DRM_DEBUG_DP("link 0x%x not supported\n", data);
+		goto end;
+	}
+
+	DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
+	link->request.test_requested = data;
+
+	if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
+		ret = dp_link_parse_phy_test_params(link);
+		if (ret)
+			goto end;
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (dp_link_is_video_audio_test_requested(
+			link->request.test_requested)) {
+		ret = dp_link_parse_video_pattern_params(link);
+		if (ret)
+			goto end;
+
+		ret = dp_link_parse_audio_pattern_params(link);
+	}
+end:
+	/*
+	 * Send a DP_TEST_ACK if all link parameters are valid, otherwise send
+	 * a DP_TEST_NAK.
+	 */
+	if (ret) {
+		link->dp_link.test_response = DP_TEST_NAK;
+	} else {
+		if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
+			link->dp_link.test_response = DP_TEST_ACK;
+		else
+			link->dp_link.test_response =
+				DP_TEST_EDID_CHECKSUM_WRITE;
+	}
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_sink_count() - parses the sink count
+ *
+ * Parses the DPCD to check if there is an update to the sink count
+ * (Byte 0x200), and whether all the sink devices connected have Content
+ * Protection enabled.
+ */
+static int dp_link_parse_sink_count(struct dp_link *dp_link)
+{
+	ssize_t rlen;
+	bool cp_ready;
+
+	struct dp_link_private *link = container_of(dp_link,
+			struct dp_link_private, dp_link);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
+				 &link->dp_link.sink_count);
+	if (rlen < 0) {
+		DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
+
+	link->dp_link.sink_count =
+		DP_GET_SINK_COUNT(link->dp_link.sink_count);
+
+	DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
+		link->dp_link.sink_count, cp_ready);
+	return 0;
+}
+
+static void dp_link_parse_sink_status_field(struct dp_link_private *link)
+{
+	int len = 0;
+
+	link->prev_sink_count = link->dp_link.sink_count;
+	dp_link_parse_sink_count(&link->dp_link);
+
+	len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
+		link->link_status);
+	if (len < DP_LINK_STATUS_SIZE)
+		DRM_ERROR("DP link status read failed\n");
+	dp_link_parse_request(link);
+}
+
+/**
+ * dp_link_process_link_training_request() - processes new training requests
+ * @link: Display Port link data
+ *
+ * This function will handle new link training requests that are initiated by
+ * the sink. In particular, it will update the requested lane count and link
+ * link rate, and then trigger the link retraining procedure.
+ *
+ * The function will return 0 if a link training request has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_training_request(struct dp_link_private *link)
+{
+	if (link->request.test_requested != DP_TEST_LINK_TRAINING)
+		return -EINVAL;
+
+	DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
+			DP_TEST_LINK_TRAINING,
+			link->request.test_link_rate,
+			link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	return 0;
+}
+
+bool dp_link_send_test_response(struct dp_link *dp_link)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
+			dp_link->test_response);
+	mutex_unlock(&link->test_response_mutex);
+
+	return ret == 1;
+}
+
+int dp_link_psm_config(struct dp_link *dp_link,
+			      struct drm_dp_link *link_info, bool enable)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->psm_mutex);
+	if (enable)
+		ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
+	else
+		ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
+
+	if (ret)
+		DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" : "exit");
+	else
+		dp_link->psm_enabled = enable;
+
+	mutex_unlock(&link->psm_mutex);
+	return ret;
+}
+
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM, checksum);
+	return ret == 1;
+}
+
+static int dp_link_parse_vx_px(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_voltage(link->link_status, 0),
+		drm_dp_get_adjust_request_voltage(link->link_status, 1),
+		drm_dp_get_adjust_request_voltage(link->link_status, 2),
+		drm_dp_get_adjust_request_voltage(link->link_status, 3));
+
+	DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
+
+	/**
+	 * Update the voltage and pre-emphasis levels as per DPCD request
+	 * vector.
+	 */
+	DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+	link->dp_link.phy_params.v_level =
+		drm_dp_get_adjust_request_voltage(link->link_status, 0);
+	link->dp_link.phy_params.p_level =
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
+	DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+
+	return ret;
+}
+
+/**
+ * dp_link_process_phy_test_pattern_request() - process new phy link requests
+ * @link: Display Port Driver data
+ *
+ * This function will handle new phy link pattern requests that are initiated
+ * by the sink. The function will return 0 if a phy link pattern has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_phy_test_pattern_request(
+		struct dp_link_private *link)
+{
+	int ret = 0;
+
+	if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) {
+		DRM_DEBUG_DP("no phy test\n");
+		return -EINVAL;
+	}
+
+	if (!is_link_rate_valid(link->request.test_link_rate) ||
+		!is_lane_count_valid(link->request.test_lane_count)) {
+		DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+		return -EINVAL;
+	}
+
+	DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
+			link->dp_link.link_params.rate,
+			link->dp_link.link_params.num_lanes);
+
+	DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	ret = dp_link_parse_vx_px(link);
+	if (ret)
+		  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
+
+	return ret;
+}
+
+static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+/**
+ * dp_link_process_link_status_update() - processes link status updates
+ * @link: Display Port link module data
+ *
+ * This function will check for changes in the link status, e.g. clock
+ * recovery done on all lanes, and trigger link training if there is a
+ * failure/error on the link.
+ *
+ * The function will return 0 if the a link status update has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_status_update(struct dp_link_private *link)
+{
+	if (!(get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+							DP_LINK_STATUS_UPDATED) ||
+			(drm_dp_clock_recovery_ok(link->link_status,
+					link->dp_link.link_params.num_lanes) &&
+			drm_dp_channel_eq_ok(link->link_status,
+					link->dp_link.link_params.num_lanes)))
+		return -EINVAL;
+
+	DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes),
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes));
+
+	return 0;
+}
+
+/**
+ * dp_link_process_downstream_port_status_change() - process port status changes
+ * @link: Display Port Driver data
+ *
+ * This function will handle downstream port updates that are initiated by
+ * the sink. If the downstream port status has changed, the EDID is read via
+ * AUX.
+ *
+ * The function will return 0 if a downstream port update has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_ds_port_status_change(struct dp_link_private *link)
+{
+	if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+					DP_DOWNSTREAM_PORT_STATUS_CHANGED)
+		goto reset;
+
+	if (link->prev_sink_count == link->dp_link.sink_count)
+		return -EINVAL;
+
+reset:
+	/* reset prev_sink_count */
+	link->prev_sink_count = link->dp_link.sink_count;
+
+	return 0;
+}
+
+static bool dp_link_is_video_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
+		&& !(link->request.test_requested &
+		DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+}
+
+static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
+}
+
+static void dp_link_reset_data(struct dp_link_private *link)
+{
+	link->request = (const struct dp_link_request){ 0 };
+	link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
+	link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
+	link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
+	link->dp_link.phy_params.phy_test_pattern_sel = 0;
+	link->dp_link.sink_request = 0;
+	link->dp_link.test_response = 0;
+}
+
+/**
+ * dp_link_process_request() - handle HPD IRQ transition to HIGH
+ * @link: pointer to link module data
+ *
+ * This function will handle the HPD IRQ state transitions from LOW to HIGH
+ * (including cases when there are back to back HPD IRQ HIGH) indicating
+ * the start of a new link training request or sink status update.
+ */
+int dp_link_process_request(struct dp_link *dp_link)
+{
+	int ret = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	dp_link_reset_data(link);
+
+	dp_link_parse_sink_status_field(link);
+	mutex_unlock(&link->test_response_mutex);
+
+	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
+		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
+		return ret;
+	}
+
+	ret = dp_link_process_ds_port_status_change(link);
+	if (!ret) {
+		dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
+		return ret;
+	}
+
+	ret = dp_link_process_link_training_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_TRAINING;
+		return ret;
+	}
+
+	ret = dp_link_process_phy_test_pattern_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
+		return ret;
+	}
+
+	ret = dp_link_process_link_status_update(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
+		return ret;
+	}
+
+	if (dp_link_is_video_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
+		return -EINVAL;
+	}
+
+	if (dp_link_is_audio_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+int dp_link_get_colorimetry_config(struct dp_link *dp_link)
+{
+	u32 cc;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/*
+	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
+	 * Only RGB_VESA and RGB_CEA supported for now
+	 */
+	if (dp_link_is_video_pattern_requested(link))
+		cc = link->dp_link.test_video.test_dyn_range;
+	else
+		cc = DP_TEST_DYNAMIC_RANGE_VESA;
+
+	return cc;
+}
+
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
+{
+	int i;
+	int v_max = 0, p_max = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/* use the max level across lanes */
+	for (i = 0; i < dp_link->link_params.num_lanes; i++) {
+		u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
+		u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+		DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
+							i, data_v, data_p);
+		if (v_max < data_v)
+			v_max = data_v;
+		if (p_max < data_p)
+			p_max = data_p;
+	}
+
+	dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+	dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	/**
+	 * Adjust the voltage swing and pre-emphasis level combination to within
+	 * the allowable range.
+	 */
+	if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
+			dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
+		dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
+	}
+
+	if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
+	}
+
+	if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
+		&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level,
+			DP_TRAIN_PRE_EMPHASIS_LVL_1);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
+	}
+
+	DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
+		dp_link->phy_params.v_level, dp_link->phy_params.p_level);
+
+	return 0;
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
+{
+	u32 tbd;
+
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Test bit depth is bit depth per color component
+	 *    2. Assume 3 color components
+	 */
+	switch (bpp) {
+	case 18:
+		tbd = DP_TEST_BIT_DEPTH_6;
+		break;
+	case 24:
+		tbd = DP_TEST_BIT_DEPTH_8;
+		break;
+	case 30:
+		tbd = DP_TEST_BIT_DEPTH_10;
+		break;
+	default:
+		tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
+		break;
+	}
+
+	if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
+		tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
+
+	return tbd;
+}
+
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
+{
+	int rc = 0;
+	struct dp_link_private *link;
+	struct dp_link *dp_link;
+
+	if (!dev || !aux) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
+	if (!link) {
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link->dev   = dev;
+	link->aux   = aux;
+
+	mutex_init(&link->test_response_mutex);
+	mutex_init(&link->psm_mutex);
+	dp_link = &link->dp_link;
+
+	return dp_link;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_link_put(struct dp_link *dp_link)
+{
+	struct dp_link_private *link;
+
+	if (!dp_link)
+		return;
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	devm_kfree(link->dev, link);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
new file mode 100644
index 0000000..607904b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_LINK_H_
+#define _DP_LINK_H_
+
+#include "dp_aux.h"
+
+#define DS_PORT_STATUS_CHANGED 0x200
+#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
+
+enum dp_link_voltage_level {
+	DP_TRAIN_VOLTAGE_SWING_LVL_0	= 0,
+	DP_TRAIN_VOLTAGE_SWING_LVL_1	= 1,
+	DP_TRAIN_VOLTAGE_SWING_LVL_2	= 2,
+	DP_TRAIN_VOLTAGE_SWING_MAX	= DP_TRAIN_VOLTAGE_SWING_LVL_2,
+};
+
+enum dp_link_preemaphasis_level {
+	DP_TRAIN_PRE_EMPHASIS_LVL_0	= 0,
+	DP_TRAIN_PRE_EMPHASIS_LVL_1	= 1,
+	DP_TRAIN_PRE_EMPHASIS_LVL_2	= 2,
+	DP_TRAIN_PRE_EMPHASIS_MAX	= DP_TRAIN_PRE_EMPHASIS_LVL_2,
+};
+
+struct dp_link_test_video {
+	u32 test_video_pattern;
+	u32 test_bit_depth;
+	u32 test_dyn_range;
+	u32 test_h_total;
+	u32 test_v_total;
+	u32 test_h_start;
+	u32 test_v_start;
+	u32 test_hsync_pol;
+	u32 test_hsync_width;
+	u32 test_vsync_pol;
+	u32 test_vsync_width;
+	u32 test_h_width;
+	u32 test_v_height;
+	u32 test_rr_d;
+	u32 test_rr_n;
+};
+
+struct dp_link_test_audio {
+	u32 test_audio_sampling_rate;
+	u32 test_audio_channel_count;
+	u32 test_audio_pattern_type;
+	u32 test_audio_period_ch_1;
+	u32 test_audio_period_ch_2;
+	u32 test_audio_period_ch_3;
+	u32 test_audio_period_ch_4;
+	u32 test_audio_period_ch_5;
+	u32 test_audio_period_ch_6;
+	u32 test_audio_period_ch_7;
+	u32 test_audio_period_ch_8;
+};
+
+struct dp_link_phy_params {
+	u32 phy_test_pattern_sel;
+	u8 v_level;
+	u8 p_level;
+};
+
+struct dp_link {
+	u32 sink_request;
+	u32 test_response;
+	bool psm_enabled;
+
+	u8 sink_count;
+	struct dp_link_test_video test_video;
+	struct dp_link_test_audio test_audio;
+	struct dp_link_phy_params phy_params;
+	struct drm_dp_link link_params;
+};
+
+/**
+ * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
+ * @tbd: test bit depth
+ *
+ * Returns the bits per pixel (bpp) to be used corresponding to the
+ * git bit depth value. This function assumes that bit depth has
+ * already been validated.
+ */
+static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
+{
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Bit depth is per color component
+	 *    2. If bit depth is unknown return 0
+	 *    3. Assume 3 color components
+	 */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+		return 18;
+	case DP_TEST_BIT_DEPTH_8:
+		return 24;
+	case DP_TEST_BIT_DEPTH_10:
+		return 30;
+	case DP_TEST_BIT_DEPTH_UNKNOWN:
+	default:
+		return 0;
+	}
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
+int dp_link_process_request(struct dp_link *dp_link);
+int dp_link_get_colorimetry_config(struct dp_link *dp_link);
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
+bool dp_link_send_test_response(struct dp_link *dp_link);
+int dp_link_psm_config(struct dp_link *dp_link,
+		struct drm_dp_link *link_info, bool enable);
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum);
+
+/**
+ * dp_link_get() - get the functionalities of dp test module
+ *
+ *
+ * return: a pointer to dp_link struct
+ */
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
+
+/**
+ * dp_link_put() - releases the dp test module's resources
+ *
+ * @dp_link: an instance of dp_link module
+ *
+ */
+void dp_link_put(struct dp_link *dp_link);
+
+#endif /* _DP_LINK_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
new file mode 100644
index 0000000..a3150f4
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_panel.h"
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+
+#define DP_MAX_DS_PORT_COUNT 1
+
+struct dp_panel_private {
+	struct device *dev;
+	struct dp_panel dp_panel;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+	bool panel_on;
+	bool aux_cfg_update_done;
+};
+
+static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	size_t rlen;
+	struct dp_panel_private *panel;
+	struct drm_dp_link *link_info;
+	u8 *dpcd, major = 0, minor = 0;
+	u32 dfp_count = 0;
+
+	dpcd = dp_panel->dpcd;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	link_info = &dp_panel->link_info;
+	rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
+	if (rc < 0) {
+		DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
+		return rc;
+	}
+	major = (link_info->revision >> 4) & 0x0f;
+	minor = link_info->revision & 0x0f;
+	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
+	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
+	DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
+
+	rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
+		dpcd, (DP_RECEIVER_CAP_SIZE + 1));
+	if (rlen < 0) {
+		DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
+		return -EINVAL;
+	}
+
+	dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
+						DP_DOWN_STREAM_PORT_COUNT;
+	if (dfp_count > DP_MAX_DS_PORT_COUNT) {
+		DRM_ERROR("DS port count %d greater that max (%d) supported\n",
+			dfp_count, DP_MAX_DS_PORT_COUNT);
+		return -EINVAL;
+	}
+	return rc;
+}
+
+static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct drm_dp_link *link_info;
+	const u32 max_supported_bpp = 30, min_supported_bpp = 18;
+	u32 bpp = 0, data_rate_khz = 0;
+
+	bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
+
+	link_info = &dp_panel->link_info;
+	data_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	while (bpp > min_supported_bpp) {
+		if (mode_pclk_khz * bpp <= data_rate_khz)
+			break;
+		bpp -= 6;
+	}
+
+	return bpp;
+}
+
+static void dp_panel_set_test_mode(struct dp_panel_private *panel,
+		struct dp_display_mode *mode)
+{
+	struct drm_display_mode *drm_mode = NULL;
+	struct dp_link_test_video *test_info = NULL;
+
+	drm_mode = &mode->drm_mode;
+	test_info = &panel->link->test_video;
+
+	drm_mode->hdisplay = test_info->test_h_width;
+	drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total -
+			(test_info->test_h_start + test_info->test_h_width);
+	drm_mode->hsync_end = drm_mode->hsync_start + test_info->test_hsync_width;
+	drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
+						test_info->test_hsync_width;
+
+	drm_mode->vdisplay = test_info->test_v_height;
+	drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total -
+			(test_info->test_v_start + test_info->test_v_height);
+	drm_mode->vsync_end = drm_mode->vsync_start + test_info->test_vsync_width;
+	drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
+						test_info->test_vsync_width;
+
+	drm_mode->vrefresh = test_info->test_rr_n;
+	drm_mode->clock = test_info->test_h_total *
+		test_info->test_v_total * drm_mode->vrefresh;
+
+	drm_mode->type = 0x48;
+	drm_mode_set_name(drm_mode);
+
+	if (test_info->test_rr_d == 0)
+		drm_mode->clock /= 1000;
+	else
+		drm_mode->clock /= 1001;
+
+	if (test_info->test_h_width == 640)
+		drm_mode->clock = 25170;
+}
+
+static int dp_panel_update_modes(struct drm_connector *connector,
+	struct edid *edid)
+{
+	int rc = 0;
+
+	if (edid) {
+		rc = drm_connector_update_edid_property(connector, edid);
+		if (rc) {
+			DRM_ERROR("failed to update edid property %d\n", rc);
+			return rc;
+		}
+		rc = drm_add_edid_modes(connector, edid);
+		DRM_DEBUG_DP("%s -", __func__);
+		return rc;
+	}
+
+	rc = drm_connector_update_edid_property(connector, NULL);
+	if (rc)
+		DRM_ERROR("failed to update edid property %d\n", rc);
+
+	return rc;
+}
+
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+	struct drm_connector *connector)
+{
+	int rc = 0, bw_code;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel || !connector) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	rc = dp_panel_read_dpcd(dp_panel);
+	bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+	if (rc || !is_link_rate_valid(bw_code) ||
+			!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+			(bw_code > dp_panel->max_bw_code)) {
+		DRM_ERROR("read dpcd failed %d\n", rc);
+		return rc;
+	}
+	rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
+			      drm_dp_is_branch(dp_panel->dpcd));
+	if (rc) {
+		DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
+		return rc;
+	}
+
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = drm_get_edid(connector,
+					      &panel->aux->drm_aux->ddc);
+	if (!dp_panel->edid) {
+		DRM_ERROR("panel edid read failed\n");
+		return -EINVAL;
+	}
+
+	if (panel->aux_cfg_update_done) {
+		DRM_DEBUG_DP("read DPCD with updated AUX config\n");
+		rc = dp_panel_read_dpcd(dp_panel);
+		bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+		if (rc || !is_link_rate_valid(bw_code) ||
+				!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+				(bw_code > dp_panel->max_bw_code)) {
+			DRM_ERROR("read dpcd failed %d\n", rc);
+			return rc;
+		}
+		panel->aux_cfg_update_done = false;
+	}
+
+	return 0;
+}
+
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct dp_panel_private *panel;
+	u32 bpp = mode_edid_bpp;
+
+	if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
+		DRM_ERROR("invalid input\n");
+		return 0;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test)
+		bpp = dp_link_bit_depth_to_bpp(
+				panel->link->test_video.test_bit_depth);
+	else
+		bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
+				mode_pclk_khz);
+
+	return bpp;
+}
+
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+	struct drm_connector *connector, struct dp_display_mode *mode)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test) {
+		dp_panel_set_test_mode(panel, mode);
+		return 1;
+	} else if (dp_panel->edid) {
+		return dp_panel_update_modes(connector, dp_panel->edid);
+	}
+
+	return 0;
+}
+
+u8 dp_panel_get_edid_checksum(struct edid *edid)
+{
+	struct edid *last_block;
+	u8 *raw_edid;
+	bool is_edid_corrupt;
+
+	if (!edid) {
+		DRM_ERROR("invalid edid input\n");
+		return 0;
+	}
+
+	raw_edid = (u8 *)edid;
+	raw_edid += (edid->extensions * EDID_LENGTH);
+	last_block = (struct edid *)raw_edid;
+
+	/* block type extension */
+	drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
+	if (!is_edid_corrupt)
+		return last_block->checksum;
+
+	DRM_ERROR("Invalid block, no checksum\n");
+	return 0;
+}
+
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
+		u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
+
+		dp_link_send_edid_checksum(panel->link, checksum);
+		dp_link_send_test_response(panel->link);
+	}
+}
+
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
+{
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+
+	if (!panel->panel_on) {
+		DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
+		return;
+	}
+
+	if (!enable) {
+		dp_catalog_panel_tpg_disable(catalog);
+		return;
+	}
+
+	DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
+	dp_catalog_panel_tpg_enable(catalog, &panel->dp_panel.dp_mode.drm_mode);
+}
+
+int dp_panel_timing_cfg(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	u32 data, total_ver, total_hor;
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+	struct drm_display_mode *drm_mode;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+	drm_mode = &panel->dp_panel.dp_mode.drm_mode;
+
+	DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
+		drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
+		drm_mode->hsync_start - drm_mode->hdisplay,
+		drm_mode->hsync_end - drm_mode->hsync_start);
+
+	DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
+		drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
+		drm_mode->vsync_start - drm_mode->vdisplay,
+		drm_mode->vsync_end - drm_mode->vsync_start);
+
+	total_hor = drm_mode->htotal;
+
+	total_ver = drm_mode->vtotal;
+
+	data = total_ver;
+	data <<= 16;
+	data |= total_hor;
+
+	catalog->total = data;
+
+	data = (drm_mode->vtotal - drm_mode->vsync_start);
+	data <<= 16;
+	data |= (drm_mode->htotal - drm_mode->hsync_start);
+
+	catalog->sync_start = data;
+
+	data = drm_mode->vsync_end - drm_mode->vsync_start;
+	data <<= 16;
+	data |= (panel->dp_panel.dp_mode.v_active_low << 31);
+	data |= drm_mode->hsync_end - drm_mode->hsync_start;
+	data |= (panel->dp_panel.dp_mode.h_active_low << 15);
+
+	catalog->width_blanking = data;
+
+	data = drm_mode->vdisplay;
+	data <<= 16;
+	data |= drm_mode->hdisplay;
+
+	catalog->dp_active = data;
+
+	dp_catalog_panel_timing_cfg(catalog);
+	panel->panel_on = true;
+
+	return rc;
+}
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &dp_panel->dp_mode.drm_mode;
+
+	/*
+	 * print resolution info as this is a result
+	 * of user initiated action of cable connection
+	 */
+	DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
+	DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
+		drm_mode->vdisplay, drm_mode->vrefresh);
+	DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->htotal - drm_mode->hsync_end,
+			drm_mode->hsync_start - drm_mode->hdisplay,
+			drm_mode->hsync_end - drm_mode->hsync_start);
+	DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->vtotal - drm_mode->vsync_end,
+			drm_mode->vsync_start - drm_mode->vdisplay,
+			drm_mode->vsync_end - drm_mode->vsync_start);
+	DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
+	DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32, dp_panel->dp_mode.bpp, 30));
+	DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	return rc;
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in)
+{
+	int rc = 0;
+	struct dp_panel_private *panel;
+	struct dp_panel *dp_panel;
+
+	if (!in->dev || !in->catalog || !in->aux || !in->link) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
+	if (!panel) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	panel->dev = in->dev;
+	panel->aux = in->aux;
+	panel->catalog = in->catalog;
+	panel->link = in->link;
+
+	dp_panel = &panel->dp_panel;
+	dp_panel->max_bw_code = DP_LINK_BW_8_1;
+	panel->aux_cfg_update_done = false;
+
+	return dp_panel;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_panel_put(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel)
+		return;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = NULL;
+	devm_kfree(panel->dev, panel);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
new file mode 100644
index 0000000..68c5650
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PANEL_H_
+#define _DP_PANEL_H_
+
+#include <drm/msm_drm.h>
+
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_extcon.h"
+
+struct edid;
+
+#define DP_MAX_DOWNSTREAM_PORTS 0x10
+
+struct dp_display_mode {
+	struct drm_display_mode drm_mode;
+	u32 capabilities;
+	u32 bpp;
+	u32 h_active_low;
+	u32 v_active_low;
+};
+
+struct dp_panel_in {
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+};
+
+struct dp_panel {
+	/* dpcd raw data */
+	u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
+
+	struct drm_dp_link link_info;
+	struct drm_dp_desc desc;
+	struct edid *edid;
+	struct drm_connector *connector;
+	struct dp_display_mode dp_mode;
+	bool video_test;
+
+	u32 vic;
+	u32 max_pclk_khz;
+
+	u32 max_bw_code;
+};
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel);
+int dp_panel_deinit(struct dp_panel *dp_panel);
+int dp_panel_timing_cfg(struct dp_panel *dp_panel);
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+		struct drm_connector *connector);
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 mode_max_bpp,
+			u32 mode_pclk_khz);
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+		struct drm_connector *connector, struct dp_display_mode *mode);
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
+
+/**
+ * is_link_rate_valid() - validates the link rate
+ * @lane_rate: link rate requested by the sink
+ *
+ * Returns true if the requested link rate is supported.
+ */
+static inline bool is_link_rate_valid(u32 bw_code)
+{
+	return (bw_code == DP_LINK_BW_1_62 ||
+		bw_code == DP_LINK_BW_2_7 ||
+		bw_code == DP_LINK_BW_5_4 ||
+		bw_code == DP_LINK_BW_8_1);
+}
+
+/**
+ * dp_link_is_lane_count_valid() - validates the lane count
+ * @lane_count: lane count requested by the sink
+ *
+ * Returns true if the requested lane count is supported.
+ */
+static inline bool is_lane_count_valid(u32 lane_count)
+{
+	return (lane_count == 1 ||
+		lane_count == 2 ||
+		lane_count == 4);
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in);
+void dp_panel_put(struct dp_panel *dp_panel);
+#endif /* _DP_PANEL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
new file mode 100644
index 0000000..3fa2a1f
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/of_gpio.h>
+
+#include "dp_parser.h"
+
+static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
+	.num = 2,
+	.regs = {
+		{"vdda-1p2", 21800, 4 },	/* 1.2 V */
+		{"vdda-0p9", 36000, 32 },	/* 0.9 V */
+	},
+};
+
+static int msm_dss_ioremap_byname(struct platform_device *pdev,
+			   struct dss_io_data *io_data, const char *name)
+{
+	struct resource *res = NULL;
+
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!res) {
+		DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -ENODEV;
+	}
+
+	io_data->len = (u32)resource_size(res);
+	io_data->base = ioremap(res->start, io_data->len);
+	if (!io_data->base) {
+		DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void msm_dss_iounmap(struct dss_io_data *io_data)
+{
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return;
+	}
+
+	if (io_data->base) {
+		iounmap(io_data->base);
+		io_data->base = NULL;
+	}
+	io_data->len = 0;
+}
+
+static void dp_parser_unmap_io_resources(struct dp_parser *parser)
+{
+	struct dp_io *io = &parser->io;
+
+	msm_dss_iounmap(&io->dp_ahb);
+	msm_dss_iounmap(&io->dp_aux);
+	msm_dss_iounmap(&io->dp_link);
+	msm_dss_iounmap(&io->dp_p0);
+	msm_dss_iounmap(&io->phy_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->dp_pll_io);
+	msm_dss_iounmap(&io->dp_cc_io);
+	msm_dss_iounmap(&io->usb3_dp_com);
+	msm_dss_iounmap(&io->qfprom_io);
+}
+
+static int dp_parser_ctrl_res(struct dp_parser *parser)
+{
+	int rc = 0;
+	u32 index;
+	struct platform_device *pdev = parser->pdev;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	struct dp_io *io = &parser->io;
+
+	rc = of_property_read_u32(of_node, "cell-index", &index);
+	if (rc) {
+		DRM_ERROR("cell-index not specified, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
+	if (rc) {
+		DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
+	if (rc) {
+		DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
+	if (rc) {
+		DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
+	if (rc) {
+		DRM_ERROR("unable to remap dp MMSS_CC resources\n");
+		goto err;
+	}
+
+	if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
+		pr_warn("unable to remap dp qfprom resources\n");
+
+	return 0;
+err:
+	dp_parser_unmap_io_resources(parser);
+	return rc;
+}
+
+static const char *dp_get_phy_aux_config_property(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return "qcom,aux-cfg0-settings";
+	case PHY_AUX_CFG1:
+		return "qcom,aux-cfg1-settings";
+	case PHY_AUX_CFG2:
+		return "qcom,aux-cfg2-settings";
+	case PHY_AUX_CFG3:
+		return "qcom,aux-cfg3-settings";
+	case PHY_AUX_CFG4:
+		return "qcom,aux-cfg4-settings";
+	case PHY_AUX_CFG5:
+		return "qcom,aux-cfg5-settings";
+	case PHY_AUX_CFG6:
+		return "qcom,aux-cfg6-settings";
+	case PHY_AUX_CFG7:
+		return "qcom,aux-cfg7-settings";
+	case PHY_AUX_CFG8:
+		return "qcom,aux-cfg8-settings";
+	case PHY_AUX_CFG9:
+		return "qcom,aux-cfg9-settings";
+	default:
+		return "unknown";
+	}
+}
+
+static int dp_parser_aux(struct dp_parser *parser)
+{
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	int len = 0, i = 0, j = 0, config_count = 0;
+	const char *data;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		const char *property = dp_get_phy_aux_config_property(i);
+
+		data = of_get_property(of_node, property, &len);
+		if (!data) {
+			DRM_ERROR("Unable to read %s\n", property);
+			goto error;
+		}
+
+		config_count = len - 1;
+		if (config_count < 1 || /* minimum config count = 1 */
+			config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
+			DRM_ERROR("Invalid config count (%d) configs for %s\n",
+					config_count, property);
+			goto error;
+		}
+
+		parser->aux_cfg[i].offset = data[0];
+		parser->aux_cfg[i].cfg_cnt = config_count;
+		DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
+				property,
+				parser->aux_cfg[i].offset,
+				parser->aux_cfg[i].cfg_cnt);
+		for (j = 1; j < len; j++) {
+			parser->aux_cfg[i].lut[j - 1] = data[j];
+			DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
+					property,
+					i,
+					parser->aux_cfg[i].lut[j - 1]);
+		}
+	}
+		return 0;
+
+error:
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
+	}
+	return -EINVAL;
+}
+
+static int dp_parser_misc(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+
+	rc = of_property_read_u32(of_node,
+		"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
+	if (rc)
+		parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
+
+	return 0;
+}
+
+static int dp_parser_pinctrl(struct dp_parser *parser)
+{
+	struct dp_pinctrl *pinctrl = &parser->pinctrl;
+
+	pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
+
+	if (IS_ERR_OR_NULL(pinctrl->pin)) {
+		DRM_ERROR("failed to get pinctrl, rc=%d\n",
+					PTR_ERR_OR_ZERO(pinctrl->pin));
+		return -EINVAL;
+	}
+
+	pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_active");
+	if (IS_ERR_OR_NULL(pinctrl->state_active)) {
+		DRM_ERROR("failed to get pinctrl active state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_active));
+		return -EINVAL;
+	}
+
+	pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_sleep");
+	if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
+		DRM_ERROR("failed to get pinctrl suspend state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_suspend));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_gpio(struct dp_parser *parser)
+{
+	struct device *dev = &parser->pdev->dev;
+	struct device_node *of_node = dev->of_node;
+
+	parser->usbplug_cc_gpio = of_get_named_gpio(of_node, "qcom,usbplug-cc-gpio", 0);
+	if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
+			DRM_ERROR("usbplug-cc-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio", 0);
+	if (!gpio_is_valid(parser->aux_en_gpio)) {
+			DRM_ERROR("aux-en-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_sel_gpio = of_get_named_gpio(of_node, "qcom,aux-sel-gpio", 0);
+	if (!gpio_is_valid(parser->aux_sel_gpio)) {
+			DRM_ERROR("aux-sel-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline bool dp_parser_check_prefix(const char *clk_prefix, const char *clk_name)
+{
+	return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
+}
+
+static int dp_parser_init_clk_data(struct dp_parser *parser)
+{
+	int num_clk = 0, i = 0, rc = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	num_clk = of_property_count_strings(dev->of_node, "clock-names");
+	if (num_clk <= 0) {
+		DRM_ERROR("no clocks are defined\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node,
+				"clock-names", i, &clk_name);
+		if (rc) {
+			DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+
+		if (dp_parser_check_prefix("core", clk_name))
+			core_clk_count++;
+
+		if (dp_parser_check_prefix("ctrl", clk_name))
+			ctrl_clk_count++;
+	}
+
+	/* Initialize the CORE power module */
+	if (core_clk_count == 0) {
+		DRM_ERROR("no core clocks are defined\n");
+		return -EINVAL;
+	}
+
+	core_power->num_clk = core_clk_count;
+	core_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * core_power->num_clk,
+			GFP_KERNEL);
+	if (!core_power->clk_config) {
+		return -EINVAL;
+	}
+
+	/* Initialize the CTRL power module */
+	if (ctrl_clk_count == 0) {
+		DRM_ERROR("no ctrl clocks are defined\n");
+		return -EINVAL;
+	}
+
+	ctrl_power->num_clk = ctrl_clk_count;
+	ctrl_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * ctrl_power->num_clk,
+			GFP_KERNEL);
+	if (!ctrl_power->clk_config) {
+		ctrl_power->num_clk = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_clock(struct dp_parser *parser)
+{
+	int rc = 0, i = 0;
+	int num_clk = 0;
+	int core_clk_index = 0, ctrl_clk_index = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	core_power = &parser->mp[DP_CORE_PM];
+	ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	rc =  dp_parser_init_clk_data(parser);
+	if (rc) {
+		DRM_ERROR("failed to initialize power data %d\n", rc);
+		return -EINVAL;
+	}
+
+	core_clk_count = core_power->num_clk;
+	ctrl_clk_count = ctrl_power->num_clk;
+
+	num_clk = core_clk_count + ctrl_clk_count;
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node, "clock-names",
+				i, &clk_name);
+		if (rc) {
+			 DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+		if (dp_parser_check_prefix("core", clk_name) &&
+				core_clk_index < core_clk_count) {
+			struct dss_clk *clk =
+				&core_power->clk_config[core_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			clk->type = DSS_CLK_AHB;
+			core_clk_index++;
+		} else if (dp_parser_check_prefix("ctrl", clk_name) &&
+			   ctrl_clk_index < ctrl_clk_count) {
+			struct dss_clk *clk =
+				&ctrl_power->clk_config[ctrl_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			ctrl_clk_index++;
+
+			if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
+			  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
+				clk->type = DSS_CLK_PCLK;
+			else
+				clk->type = DSS_CLK_AHB;
+		}
+	}
+
+	DRM_DEBUG_DP("clock parsing successful\n");
+
+	return 0;
+}
+
+static int dp_parser_parse(struct dp_parser *parser)
+{
+	int rc = 0;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	/* Default: We assume that PHY is shared between USB and DP (Combo phy) */
+	parser->combo_phy_en = true;
+
+	rc = dp_parser_ctrl_res(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_aux(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_misc(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_clock(parser);
+	if (rc)
+		return rc;
+
+	/* Map the corresponding regulator information according to
+	 * version. Currently, since we only have one supported platform,
+	 * mapping the regulator directly.
+	 */
+	parser->regulator_cfg = &sdm845_dp_reg_cfg;
+
+	rc = dp_parser_gpio(parser);
+	if (rc) {
+		DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is disabled\n");
+		parser->combo_phy_en = false;
+		return rc;
+	}
+
+	rc = dp_parser_pinctrl(parser);
+	return rc;
+}
+
+struct dp_parser *dp_parser_get(struct platform_device *pdev)
+{
+	struct dp_parser *parser;
+
+	parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
+	if (!parser)
+		return ERR_PTR(-ENOMEM);
+
+	parser->parse = dp_parser_parse;
+	parser->pdev = pdev;
+
+	return parser;
+}
+
+void dp_parser_put(struct dp_parser *parser)
+{
+
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
new file mode 100644
index 0000000..b606b40
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PARSER_H_
+#define _DP_PARSER_H_
+
+#define DP_LABEL "MDSS DP DISPLAY"
+#define AUX_CFG_LEN	10
+#define DP_MAX_PIXEL_CLK_KHZ	675000
+
+enum dp_pm_type {
+	DP_CORE_PM,
+	DP_CTRL_PM,
+	DP_PHY_PM,
+	DP_MAX_PM
+};
+
+struct dss_io_data {
+	u32 len;
+	void __iomem *base;
+};
+
+static inline const char *dp_parser_pm_name(enum dp_pm_type module)
+{
+	switch (module) {
+	case DP_CORE_PM:	return "DP_CORE_PM";
+	case DP_CTRL_PM:	return "DP_CTRL_PM";
+	case DP_PHY_PM:		return "DP_PHY_PM";
+	default:		return "???";
+	}
+}
+
+/**
+ * struct dp_display_data  - display related device tree data.
+ *
+ * @ctrl_node: referece to controller device
+ * @phy_node:  reference to phy device
+ * @is_active: is the controller currently active
+ * @name: name of the display
+ * @display_type: type of the display
+ */
+struct dp_display_data {
+	struct device_node *ctrl_node;
+	struct device_node *phy_node;
+	bool is_active;
+	const char *name;
+	const char *display_type;
+};
+
+/**
+ * struct dp_ctrl_resource - controller's IO related data
+ *
+ * @dp_ahb: controller's ahb mapped memory address
+ * @dp_aux: controller's aux mapped memory address
+ * @dp_link: controller's link mapped memory address
+ * @dp_p0: controller's p0 mapped memory address
+ * @phy_io: phy's mapped memory address
+ * @ln_tx0_io: USB-DP lane TX0's mapped memory address
+ * @ln_tx1_io: USB-DP lane TX1's mapped memory address
+ * @dp_cc_io: DP cc's mapped memory address
+ * @qfprom_io: qfprom's mapped memory address
+ * @dp_pll_io: DP PLL mapped memory address
+ * @usb3_dp_com: USB3 DP PHY combo mapped memory address
+ */
+struct dp_io {
+	struct dss_io_data ctrl_io;
+	struct dss_io_data dp_ahb;
+	struct dss_io_data dp_aux;
+	struct dss_io_data dp_link;
+	struct dss_io_data dp_p0;
+	struct dss_io_data phy_io;
+	struct dss_io_data ln_tx0_io;
+	struct dss_io_data ln_tx1_io;
+	struct dss_io_data dp_cc_io;
+	struct dss_io_data qfprom_io;
+	struct dss_io_data dp_pll_io;
+	struct dss_io_data usb3_dp_com;
+};
+
+/**
+ * struct dp_pinctrl - DP's pin control
+ *
+ * @pin: pin-controller's instance
+ * @state_active: active state pin control
+ * @state_hpd_active: hpd active state pin control
+ * @state_suspend: suspend state pin control
+ */
+struct dp_pinctrl {
+	struct pinctrl *pin;
+	struct pinctrl_state *state_active;
+	struct pinctrl_state *state_hpd_active;
+	struct pinctrl_state *state_suspend;
+};
+
+#define DP_ENUM_STR(x)	#x
+#define DP_AUX_CFG_MAX_VALUE_CNT 3
+/**
+ * struct dp_aux_cfg - DP's AUX configuration settings
+ *
+ * @cfg_cnt: count of the configurable settings for the AUX register
+ * @current_index: current index of the AUX config lut
+ * @offset: register offset of the AUX config register
+ * @lut: look up table for the AUX config values for this register
+ */
+struct dp_aux_cfg {
+	u32 cfg_cnt;
+	u32 current_index;
+	u32 offset;
+	u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
+};
+
+/* PHY AUX config registers */
+enum dp_phy_aux_config_type {
+	PHY_AUX_CFG0,
+	PHY_AUX_CFG1,
+	PHY_AUX_CFG2,
+	PHY_AUX_CFG3,
+	PHY_AUX_CFG4,
+	PHY_AUX_CFG5,
+	PHY_AUX_CFG6,
+	PHY_AUX_CFG7,
+	PHY_AUX_CFG8,
+	PHY_AUX_CFG9,
+	PHY_AUX_CFG_MAX,
+};
+
+#define DP_DEV_REGULATOR_MAX	4
+
+/* Regulators for DP devices */
+struct dp_reg_entry {
+	char name[32];
+	int enable_load;
+	int disable_load;
+};
+
+struct dp_regulator_cfg {
+	int num;
+	struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
+};
+
+
+static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return DP_ENUM_STR(PHY_AUX_CFG0);
+	case PHY_AUX_CFG1:
+		return DP_ENUM_STR(PHY_AUX_CFG1);
+	case PHY_AUX_CFG2:
+		return DP_ENUM_STR(PHY_AUX_CFG2);
+	case PHY_AUX_CFG3:
+		return DP_ENUM_STR(PHY_AUX_CFG3);
+	case PHY_AUX_CFG4:
+		return DP_ENUM_STR(PHY_AUX_CFG4);
+	case PHY_AUX_CFG5:
+		return DP_ENUM_STR(PHY_AUX_CFG5);
+	case PHY_AUX_CFG6:
+		return DP_ENUM_STR(PHY_AUX_CFG6);
+	case PHY_AUX_CFG7:
+		return DP_ENUM_STR(PHY_AUX_CFG7);
+	case PHY_AUX_CFG8:
+		return DP_ENUM_STR(PHY_AUX_CFG8);
+	case PHY_AUX_CFG9:
+		return DP_ENUM_STR(PHY_AUX_CFG9);
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * struct dp_parser - DP parser's data exposed to clients
+ *
+ * @pdev: platform data of the client
+ * @mp: gpio, regulator and clock related data
+ * @pinctrl: pin-control related data
+ * @aux_en_gpio: GPIO to control AUX data when using combo PHY
+ * @aux_sel_gpio: GPIO to control plug orientation when using combo PHY
+ * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
+ * @combo_phy_en: Boolean to check whether combo PHY is used
+ * @disp_data: controller's display related data
+ * @parse: function to be called by client to parse device tree.
+ */
+struct dp_parser {
+	struct platform_device *pdev;
+	struct dss_module_power mp[DP_MAX_PM];
+	struct dp_pinctrl pinctrl;
+	unsigned int aux_en_gpio;
+	unsigned int aux_sel_gpio;
+	unsigned int usbplug_cc_gpio;
+	bool combo_phy_en;
+	struct dp_io io;
+	struct dp_display_data disp_data;
+	const struct dp_regulator_cfg *regulator_cfg;
+	u8 l_map[4];
+	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
+	u32 max_pclk_khz;
+
+	int (*parse)(struct dp_parser *parser);
+};
+
+/**
+ * dp_parser_get() - get the DP's device tree parser module
+ *
+ * @pdev: platform data of the client
+ * return: pointer to dp_parser structure.
+ *
+ * This function provides client capability to parse the
+ * device tree and populate the data structures. The data
+ * related to clock, regulators, pin-control and other
+ * can be parsed using this module.
+ */
+struct dp_parser *dp_parser_get(struct platform_device *pdev);
+
+/**
+ * dp_parser_put() - cleans the dp_parser module
+ *
+ * @parser: pointer to the parser's data.
+ */
+void dp_parser_put(struct dp_parser *parser);
+#endif
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
new file mode 100644
index 0000000..3fa4c9b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_gpio.h>
+#include "dp_power.h"
+
+struct dp_power_private {
+	struct dp_parser *parser;
+	struct platform_device *pdev;
+	struct clk *pixel_clk_rcg;
+	struct clk *link_clk_src;
+	struct clk *pixel_provider;
+	struct clk *link_provider;
+	struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
+
+	struct dp_power dp_power;
+};
+
+static void dp_power_regulator_disable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer,
+					   regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dp_power_regulator_enable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+						 regs[i].enable_load);
+			if (ret < 0) {
+				pr_err("regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		pr_err("regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
+static int dp_power_regulator_init(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	struct platform_device *pdev = power->pdev;
+	int num = power->parser->regulator_cfg->num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(&pdev->dev, num, s);
+	if (ret < 0) {
+		pr_err("%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dp_power_pinctrl_set(struct dp_power_private *power, bool active)
+{
+	int rc = -EFAULT;
+	struct pinctrl_state *pin_state;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return 0;
+
+	pin_state = active ? parser->pinctrl.state_active
+				: parser->pinctrl.state_suspend;
+
+	rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
+	if (rc) {
+		DRM_ERROR("can not set %s pins\n",
+			active ? "dp_active" : "dp_sleep");
+		return rc;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_init(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct dss_module_power *core, *ctrl;
+	struct device *dev = &power->pdev->dev;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (power->parser->pll && power->parser->pll->get_provider) {
+		rc = power->parser->pll->get_provider(power->parser->pll,
+				&power->link_provider, &power->pixel_provider);
+		if (rc) {
+			pr_info("%s: can't get provider from pll, don't set parent\n",
+				__func__);
+			return 0;
+		}
+	}
+
+	rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CORE_PM), rc);
+		return rc;
+	}
+
+	rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CTRL_PM), rc);
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
+	if (IS_ERR(power->pixel_clk_rcg)) {
+		DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
+		power->pixel_clk_rcg = NULL;
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_deinit(struct dp_power_private *power)
+{
+	struct dss_module_power *core, *ctrl;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (!core || !ctrl) {
+		DRM_ERROR("invalid power_data\n");
+		return -EINVAL;
+	}
+
+	msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
+	msm_dss_put_clk(core->clk_config, core->num_clk);
+	return 0;
+}
+
+static int dp_power_clk_set_rate(struct dp_power_private *power,
+		enum dp_pm_type module, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp = &power->parser->mp[module];
+
+	if (enable) {
+		rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
+		if (rc) {
+			DRM_ERROR("failed to set clks rate.\n");
+			return rc;
+		}
+	}
+
+	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
+	if (rc) {
+		DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+int dp_power_clk_enable(struct dp_power *dp_power,
+		enum dp_pm_type pm_type, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+	mp = &power->parser->mp[pm_type];
+
+	if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
+		DRM_ERROR("unsupported power module: %s\n",
+				dp_parser_pm_name(pm_type));
+		return -EINVAL;
+	}
+
+	if (enable) {
+		if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
+			DRM_DEBUG_DP("core clks already enabled\n");
+			return 0;
+		}
+
+		if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
+			DRM_DEBUG_DP("links clks already enabled\n");
+			return 0;
+		}
+
+		if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
+			DRM_DEBUG_DP("Need to enable core clks before link clks\n");
+
+			rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
+			if (rc) {
+				DRM_ERROR("failed to enable clks: %s. err=%d\n",
+					dp_parser_pm_name(DP_CORE_PM), rc);
+				return rc;
+			}
+			dp_power->core_clks_on = true;
+		}
+	}
+
+	rc = dp_power_clk_set_rate(power, pm_type, enable);
+	if (rc) {
+		DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type), rc);
+			return rc;
+	}
+
+	if (pm_type == DP_CORE_PM)
+		dp_power->core_clks_on = enable;
+	else
+		dp_power->link_clks_on = enable;
+
+	DRM_DEBUG_DP("%s clocks for %s\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type));
+	DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
+		dp_power->link_clks_on ? "on" : "off",
+		dp_power->core_clks_on ? "on" : "off");
+
+	return 0;
+}
+
+static int dp_power_request_gpios(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct device *dev = &power->pdev->dev;
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_en_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
+		if (rc) {
+			DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->aux_sel_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
+		if (rc) {
+			DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->usbplug_cc_gpio)) {
+		rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
+		if (rc) {
+			DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static void dp_power_set_gpio(struct dp_power_private *power, bool flip)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_sel_gpio))
+		gpio_direction_output(parser->aux_sel_gpio, flip);
+
+	if (gpio_is_valid(parser->aux_en_gpio))
+		gpio_direction_output(parser->aux_en_gpio, 0);
+
+	if (gpio_is_valid(parser->usbplug_cc_gpio))
+		gpio_set_value(parser->usbplug_cc_gpio, 0);
+}
+
+static int dp_power_config_gpios(struct dp_power_private *power, bool flip)
+{
+	int rc = 0;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return rc;
+
+	rc = dp_power_request_gpios(power);
+	if (rc) {
+		DRM_ERROR("gpio request failed\n");
+		return rc;
+	}
+
+	dp_power_set_gpio(power, flip);
+	return 0;
+}
+
+static void dp_power_disable_gpios(struct dp_power_private *power)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return;
+
+	gpio_set_value(parser->aux_sel_gpio, 0);
+	gpio_set_value(parser->aux_en_gpio, 0);
+	gpio_set_value(parser->usbplug_cc_gpio, 0);
+	gpio_free(parser->aux_sel_gpio);
+	gpio_free(parser->aux_en_gpio);
+	gpio_free(parser->usbplug_cc_gpio);
+}
+
+int dp_power_client_init(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return -EINVAL;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_enable(&power->pdev->dev);
+
+	rc = dp_power_regulator_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init regulators %d\n", rc);
+		goto error;
+	}
+
+	rc = dp_power_clk_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init clocks %d\n", rc);
+		goto error;
+	}
+	return 0;
+
+error:
+	pm_runtime_disable(&power->pdev->dev);
+	return rc;
+}
+
+void dp_power_client_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_deinit(power);
+	pm_runtime_disable(&power->pdev->dev);
+
+}
+
+int dp_power_set_link_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	u32 num;
+	struct dss_clk *cfg;
+	char *name = "ctrl_link_clk";
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	num = power->parser->mp[DP_CTRL_PM].num_clk;
+	cfg = power->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	if (num && power->link_provider) {
+		power->link_clk_src = clk_get_parent(cfg->clk);
+			if (power->link_clk_src) {
+				clk_set_parent(power->link_clk_src, power->link_provider);
+				DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+						__clk_get_name(power->link_provider),
+						__clk_get_name(power->link_clk_src));
+			} else {
+				DRM_ERROR("couldn't get parent for clk=%s\n", name);
+				rc = -EINVAL;
+			}
+	} else {
+		DRM_ERROR("%s clock could not be set parent\n", name);
+		rc = -EINVAL;
+	}
+exit:
+	return rc;
+}
+
+int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	if (power->pixel_clk_rcg && power->pixel_provider) {
+		rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
+		if (rc) {
+			DRM_ERROR("failed to set parent clk src, %d\n", rc);
+			return rc;
+		}
+		DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+					__clk_get_name(power->pixel_provider),
+					__clk_get_name(power->pixel_clk_rcg));
+	}
+
+	return 0;
+}
+
+int dp_power_init(struct dp_power *dp_power, bool flip)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_get_sync(&power->pdev->dev);
+	rc = dp_power_regulator_enable(power);
+	if (rc) {
+		DRM_ERROR("failed to enable regulators, %d\n", rc);
+		goto exit;
+	}
+
+	rc = dp_power_pinctrl_set(power, true);
+	if (rc) {
+		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
+		goto err_pinctrl;
+	}
+
+	rc = dp_power_config_gpios(power, flip);
+	if (rc) {
+		DRM_ERROR("failed to enable gpios, %d\n", rc);
+		goto err_gpio;
+	}
+
+	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
+	if (rc) {
+		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	dp_power_disable_gpios(power);
+err_gpio:
+	dp_power_pinctrl_set(power, false);
+err_pinctrl:
+	dp_power_regulator_disable(power);
+exit:
+	pm_runtime_put_sync(&power->pdev->dev);
+	return rc;
+}
+
+int dp_power_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_enable(dp_power, DP_CORE_PM, false);
+	dp_power_disable_gpios(power);
+	dp_power_pinctrl_set(power, false);
+	dp_power_regulator_disable(power);
+	pm_runtime_put_sync(&power->pdev->dev);
+	return 0;
+}
+
+struct dp_power *dp_power_get(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	struct dp_power *dp_power;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
+	if (!power) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	power->parser = parser;
+	power->pdev = parser->pdev;
+
+	dp_power = &power->dp_power;
+
+	return dp_power;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_power_put(struct dp_power *dp_power)
+{
+	struct dp_power_private *power = NULL;
+
+	if (!dp_power)
+		return;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	devm_kfree(&power->pdev->dev, power);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
new file mode 100644
index 0000000..40d7e73
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_POWER_H_
+#define _DP_POWER_H_
+
+#include "dp_parser.h"
+
+/**
+ * sruct dp_power - DisplayPort's power related data
+ *
+ * @init: initializes the regulators/core clocks/GPIOs/pinctrl
+ * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
+ * @clk_enable: enable/disable the DP clocks
+ * @set_link_clk_parent: set the parent of DP link clock
+ * @set_pixel_clk_parent: set the parent of DP pixel clock
+ */
+struct dp_power {
+	bool core_clks_on;
+	bool link_clks_on;
+};
+
+int dp_power_init(struct dp_power *power, bool flip);
+int dp_power_deinit(struct dp_power *power);
+int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
+				bool enable);
+int dp_power_set_link_clk_parent(struct dp_power *power);
+int dp_power_set_pixel_clk_parent(struct dp_power *power);
+int dp_power_client_init(struct dp_power *power);
+void dp_power_client_deinit(struct dp_power *power);
+
+/**
+ * dp_power_get() - configure and get the DisplayPort power module data
+ *
+ * @parser: instance of parser module
+ * return: pointer to allocated power module data
+ *
+ * This API will configure the DisplayPort's power module and provides
+ * methods to be called by the client to configure the power related
+ * modueles.
+ */
+struct dp_power *dp_power_get(struct dp_parser *parser);
+
+/**
+ * dp_power_put() - release the power related resources
+ *
+ * @power: pointer to the power module's data
+ */
+void dp_power_put(struct dp_power *power);
+#endif /* _DP_POWER_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
new file mode 100644
index 0000000..5468f7b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_reg.h
@@ -0,0 +1,488 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_REG_H_
+#define _DP_REG_H_
+
+/* DP_TX Registers */
+#define REG_DP_HW_VERSION			(0x00000000)
+
+#define REG_DP_SW_RESET				(0x00000010)
+#define DP_SW_RESET				(0x00000001)
+
+#define REG_DP_PHY_CTRL				(0x00000014)
+#define DP_PHY_CTRL_SW_RESET_PLL		(0x00000001)
+#define DP_PHY_CTRL_SW_RESET			(0x00000004)
+
+#define REG_DP_CLK_CTRL				(0x00000018)
+#define REG_DP_CLK_ACTIVE			(0x0000001C)
+#define REG_DP_INTR_STATUS			(0x00000020)
+#define REG_DP_INTR_STATUS2			(0x00000024)
+#define REG_DP_INTR_STATUS3			(0x00000028)
+
+#define REG_DP_DP_HPD_CTRL			(0x00000000)
+#define DP_DP_HPD_CTRL_HPD_EN			(0x00000001)
+
+#define REG_DP_DP_HPD_INT_STATUS		(0x00000004)
+
+#define REG_DP_DP_HPD_INT_ACK			(0x00000008)
+#define DP_DP_HPD_PLUG_INT_ACK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_ACK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_ACK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_ACK		(0x00000008)
+
+#define REG_DP_DP_HPD_INT_MASK			(0x0000000C)
+#define DP_DP_HPD_PLUG_INT_MASK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_MASK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_MASK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_MASK		(0x00000008)
+
+#define REG_DP_DP_HPD_REFTIMER			(0x00000018)
+#define REG_DP_DP_HPD_EVENT_TIME_0		(0x0000001C)
+#define REG_DP_DP_HPD_EVENT_TIME_1		(0x00000020)
+
+#define REG_DP_AUX_CTRL				(0x00000030)
+#define DP_AUX_CTRL_ENABLE			(0x00000001)
+#define DP_AUX_CTRL_RESET			(0x00000002)
+
+#define REG_DP_AUX_DATA				(0x00000034)
+#define DP_AUX_DATA_READ			(0x00000001)
+#define DP_AUX_DATA_WRITE			(0x00000000)
+#define DP_AUX_DATA_OFFSET			(0x00000008)
+#define DP_AUX_DATA_INDEX_OFFSET		(0x00000010)
+#define DP_AUX_DATA_MASK			(0x0000ff00)
+#define DP_AUX_DATA_INDEX_WRITE			(0x80000000)
+
+#define REG_DP_AUX_TRANS_CTRL			(0x00000038)
+#define DP_AUX_TRANS_CTRL_I2C			(0x00000100)
+#define DP_AUX_TRANS_CTRL_GO			(0x00000200)
+#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR		(0x00000400)
+#define DP_AUX_TRANS_CTRL_NO_SEND_STOP		(0x00000800)
+
+#define REG_DP_TIMEOUT_COUNT			(0x0000003C)
+#define REG_DP_AUX_LIMITS			(0x00000040)
+#define REG_DP_AUX_STATUS			(0x00000044)
+
+#define DP_DPCD_CP_IRQ				(0x201)
+#define DP_DPCD_RXSTATUS			(0x69493)
+
+#define DP_INTERRUPT_TRANS_NUM			(0x000000A0)
+
+#define REG_DP_MAINLINK_CTRL			(0x00000000)
+#define DP_MAINLINK_CTRL_ENABLE			(0x00000001)
+#define DP_MAINLINK_CTRL_RESET			(0x00000002)
+#define DP_MAINLINK_FB_BOUNDARY_SEL		(0x02000000)
+
+#define REG_DP_STATE_CTRL			(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1	(0x00000001)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2	(0x00000002)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3	(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4	(0x00000008)
+#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE	(0x00000010)
+#define DP_STATE_CTRL_LINK_PRBS7		(0x00000020)
+#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN	(0x00000040)
+#define DP_STATE_CTRL_SEND_VIDEO		(0x00000080)
+#define DP_STATE_CTRL_PUSH_IDLE 		(0x00000100)
+
+#define REG_DP_CONFIGURATION_CTRL		(0x00000008)
+#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK	(0x00000001)
+#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
+#define DP_CONFIGURATION_CTRL_P_INTERLACED	(0x00000004)
+#define DP_CONFIGURATION_CTRL_INTERLACED_BTF	(0x00000008)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES	(0x00000010)
+#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING	(0x00000040)
+#define DP_CONFIGURATION_CTRL_SEND_VSC		(0x00000080)
+#define DP_CONFIGURATION_CTRL_BPC		(0x00000100)
+#define DP_CONFIGURATION_CTRL_ASSR		(0x00000400)
+#define DP_CONFIGURATION_CTRL_RGB_YUV		(0x00000800)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV		(0x00002000)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
+#define DP_CONFIGURATION_CTRL_BPC_SHIFT 	      (0x08)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT	      (0x0D)
+
+#define REG_DP_SOFTWARE_MVID			(0x00000010)
+#define REG_DP_SOFTWARE_NVID			(0x00000018)
+#define REG_DP_TOTAL_HOR_VER			(0x0000001C)
+#define REG_DP_START_HOR_VER_FROM_SYNC		(0x00000020)
+#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY	(0x00000024)
+#define REG_DP_ACTIVE_HOR_VER			(0x00000028)
+
+#define REG_DP_MISC1_MISC0			(0x0000002C)
+#define DP_MISC0_SYNCHRONOUS_CLK		(0x00000001)
+#define DP_MISC0_COLORIMETRY_CFG_SHIFT		(0x00000001)
+#define DP_MISC0_TEST_BITS_DEPTH_SHIFT		(0x00000005)
+
+#define REG_DP_VALID_BOUNDARY			(0x00000030)
+#define REG_DP_VALID_BOUNDARY_2			(0x00000034)
+
+#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING	(0x00000038)
+#define LANE0_MAPPING_SHIFT			(0x00000000)
+#define LANE1_MAPPING_SHIFT			(0x00000002)
+#define LANE2_MAPPING_SHIFT			(0x00000004)
+#define LANE3_MAPPING_SHIFT			(0x00000006)
+
+#define REG_DP_MAINLINK_READY			(0x00000040)
+#define DP_MAINLINK_READY_FOR_VIDEO		(0x00000001)
+#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT	(0x00000003)
+
+#define REG_DP_MAINLINK_LEVELS			(0x00000044)
+#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2	(0x00000002)
+
+
+#define REG_DP_TU				(0x0000004C)
+
+#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET	(0x00000054)
+#define DP_HBR2_ERM_PATTERN			(0x00010000)
+
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0	(0x000000C0)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1	(0x000000C4)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2	(0x000000C8)
+
+#define MMSS_DP_MISC1_MISC0			(0x0000002C)
+#define MMSS_DP_AUDIO_TIMING_GEN		(0x00000080)
+#define MMSS_DP_AUDIO_TIMING_RBR_32		(0x00000084)
+#define MMSS_DP_AUDIO_TIMING_HBR_32		(0x00000088)
+#define MMSS_DP_AUDIO_TIMING_RBR_44		(0x0000008C)
+#define MMSS_DP_AUDIO_TIMING_HBR_44		(0x00000090)
+#define MMSS_DP_AUDIO_TIMING_RBR_48		(0x00000094)
+#define MMSS_DP_AUDIO_TIMING_HBR_48		(0x00000098)
+
+#define MMSS_DP_PSR_CRC_RG			(0x00000154)
+#define MMSS_DP_PSR_CRC_B			(0x00000158)
+
+#define REG_DP_COMPRESSION_MODE_CTRL		(0x00000180)
+
+#define MMSS_DP_AUDIO_CFG			(0x00000200)
+#define MMSS_DP_AUDIO_STATUS			(0x00000204)
+#define MMSS_DP_AUDIO_PKT_CTRL			(0x00000208)
+#define MMSS_DP_AUDIO_PKT_CTRL2			(0x0000020C)
+#define MMSS_DP_AUDIO_ACR_CTRL			(0x00000210)
+#define MMSS_DP_AUDIO_CTRL_RESET		(0x00000214)
+
+#define MMSS_DP_SDP_CFG				(0x00000228)
+#define MMSS_DP_SDP_CFG2			(0x0000022C)
+#define MMSS_DP_AUDIO_TIMESTAMP_0		(0x00000230)
+#define MMSS_DP_AUDIO_TIMESTAMP_1		(0x00000234)
+
+#define MMSS_DP_AUDIO_STREAM_0			(0x00000240)
+#define MMSS_DP_AUDIO_STREAM_1			(0x00000244)
+
+#define MMSS_DP_EXTENSION_0			(0x00000250)
+#define MMSS_DP_EXTENSION_1			(0x00000254)
+#define MMSS_DP_EXTENSION_2			(0x00000258)
+#define MMSS_DP_EXTENSION_3			(0x0000025C)
+#define MMSS_DP_EXTENSION_4			(0x00000260)
+#define MMSS_DP_EXTENSION_5			(0x00000264)
+#define MMSS_DP_EXTENSION_6			(0x00000268)
+#define MMSS_DP_EXTENSION_7			(0x0000026C)
+#define MMSS_DP_EXTENSION_8			(0x00000270)
+#define MMSS_DP_EXTENSION_9			(0x00000274)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_0		(0x00000278)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_1		(0x0000027C)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_2		(0x00000280)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_3		(0x00000284)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_4		(0x00000288)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_5		(0x0000028C)
+#define MMSS_DP_AUDIO_ISRC_0			(0x00000290)
+#define MMSS_DP_AUDIO_ISRC_1			(0x00000294)
+#define MMSS_DP_AUDIO_ISRC_2			(0x00000298)
+#define MMSS_DP_AUDIO_ISRC_3			(0x0000029C)
+#define MMSS_DP_AUDIO_ISRC_4			(0x000002A0)
+#define MMSS_DP_AUDIO_ISRC_5			(0x000002A4)
+#define MMSS_DP_AUDIO_INFOFRAME_0		(0x000002A8)
+#define MMSS_DP_AUDIO_INFOFRAME_1		(0x000002AC)
+#define MMSS_DP_AUDIO_INFOFRAME_2		(0x000002B0)
+
+#define MMSS_DP_GENERIC0_0			(0x00000300)
+#define MMSS_DP_GENERIC0_1			(0x00000304)
+#define MMSS_DP_GENERIC0_2			(0x00000308)
+#define MMSS_DP_GENERIC0_3			(0x0000030C)
+#define MMSS_DP_GENERIC0_4			(0x00000310)
+#define MMSS_DP_GENERIC0_5			(0x00000314)
+#define MMSS_DP_GENERIC0_6			(0x00000318)
+#define MMSS_DP_GENERIC0_7			(0x0000031C)
+#define MMSS_DP_GENERIC0_8			(0x00000320)
+#define MMSS_DP_GENERIC0_9			(0x00000324)
+#define MMSS_DP_GENERIC1_0			(0x00000328)
+#define MMSS_DP_GENERIC1_1			(0x0000032C)
+#define MMSS_DP_GENERIC1_2			(0x00000330)
+#define MMSS_DP_GENERIC1_3			(0x00000334)
+#define MMSS_DP_GENERIC1_4			(0x00000338)
+#define MMSS_DP_GENERIC1_5			(0x0000033C)
+#define MMSS_DP_GENERIC1_6			(0x00000340)
+#define MMSS_DP_GENERIC1_7			(0x00000344)
+#define MMSS_DP_GENERIC1_8			(0x00000348)
+#define MMSS_DP_GENERIC1_9			(0x0000034C)
+
+#define MMSS_DP_VSCEXT_0			(0x000002D0)
+#define MMSS_DP_VSCEXT_1			(0x000002D4)
+#define MMSS_DP_VSCEXT_2			(0x000002D8)
+#define MMSS_DP_VSCEXT_3			(0x000002DC)
+#define MMSS_DP_VSCEXT_4			(0x000002E0)
+#define MMSS_DP_VSCEXT_5			(0x000002E4)
+#define MMSS_DP_VSCEXT_6			(0x000002E8)
+#define MMSS_DP_VSCEXT_7			(0x000002EC)
+#define MMSS_DP_VSCEXT_8			(0x000002F0)
+#define MMSS_DP_VSCEXT_9			(0x000002F4)
+
+#define MMSS_DP_BIST_ENABLE			(0x00000000)
+#define DP_BIST_ENABLE_DPBIST_EN		(0x00000001)
+
+#define MMSS_DP_TIMING_ENGINE_EN		(0x00000010)
+#define DP_TIMING_ENGINE_EN_EN			(0x00000001)
+
+#define MMSS_DP_INTF_CONFIG			(0x00000014)
+#define MMSS_DP_INTF_HSYNC_CTL			(0x00000018)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F0		(0x0000001C)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F1		(0x00000020)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0	(0x00000024)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1	(0x00000028)
+#define MMSS_INTF_DISPLAY_V_START_F0		(0x0000002C)
+#define MMSS_INTF_DISPLAY_V_START_F1		(0x00000030)
+#define MMSS_DP_INTF_DISPLAY_V_END_F0		(0x00000034)
+#define MMSS_DP_INTF_DISPLAY_V_END_F1		(0x00000038)
+#define MMSS_DP_INTF_ACTIVE_V_START_F0		(0x0000003C)
+#define MMSS_DP_INTF_ACTIVE_V_START_F1		(0x00000040)
+#define MMSS_DP_INTF_ACTIVE_V_END_F0		(0x00000044)
+#define MMSS_DP_INTF_ACTIVE_V_END_F1		(0x00000048)
+#define MMSS_DP_INTF_DISPLAY_HCTL		(0x0000004C)
+#define MMSS_DP_INTF_ACTIVE_HCTL		(0x00000050)
+#define MMSS_DP_INTF_POLARITY_CTL		(0x00000058)
+
+#define MMSS_DP_TPG_MAIN_CONTROL		(0x00000060)
+#define DP_TPG_CHECKERED_RECT_PATTERN		(0x00000100)
+
+#define MMSS_DP_TPG_VIDEO_CONFIG		(0x00000064)
+#define DP_TPG_VIDEO_CONFIG_BPP_8BIT		(0x00000001)
+#define DP_TPG_VIDEO_CONFIG_RGB			(0x00000004)
+
+#define MMSS_DP_ASYNC_FIFO_CONFIG		(0x00000088)
+
+/*DP PHY Register offsets */
+#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
+#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
+#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
+#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
+
+#define REG_DP_PHY_CFG                          (0x00000010)
+
+#define REG_DP_PHY_PD_CTL                       (0x00000018)
+#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
+#define DP_PHY_PD_CTL_PSR_PWRDN			(0x00000002)
+#define DP_PHY_PD_CTL_AUX_PWRDN			(0x00000004)
+#define DP_PHY_PD_CTL_LANE_0_1_PWRDN		(0x00000008)
+#define DP_PHY_PD_CTL_LANE_2_3_PWRDN		(0x00000010)
+#define DP_PHY_PD_CTL_PLL_PWRDN			(0x00000020)
+#define DP_PHY_PD_CTL_DP_CLAMP_EN		(0x00000040)
+
+#define REG_DP_PHY_MODE                         (0x0000001C)
+
+#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
+#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
+#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
+#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
+#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
+#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
+#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
+#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
+#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
+#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
+
+#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
+#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
+#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
+#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
+#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
+#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
+
+
+#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
+#define REG_DP_PHY_AUX_BIST_CFG			(0x00000050)
+
+#define REG_DP_PHY_VCO_DIV			0x0064
+#define REG_DP_PHY_TX0_TX1_LANE_CTL		0x006C
+#define REG_DP_PHY_TX2_TX3_LANE_CTL		0x0088
+
+#define REG_DP_PHY_SPARE0			(0x00AC)
+#define DP_PHY_SPARE0_MASK			(0x000F)
+#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT	(0x0004);
+
+#define REG_DP_PHY_STATUS			(0x00C0)
+
+/* Tx registers */
+#define REG_DP_PHY_TXn_BIST_MODE_LANENO		0x0000
+#define REG_DP_PHY_TXn_CLKBUF_ENABLE		0x0008
+
+#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL		0x000C
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK	0x001F
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN	0x0020
+
+#define REG_DP_PHY_TXn_TX_DRV_LVL		0x001C
+#define DP_PHY_TXn_TX_DRV_LVL_MASK		0x001F
+#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN		0x0020
+
+#define REG_DP_PHY_TXn_RESET_TSYNC_EN		0x0024
+#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN	0x0028
+#define REG_DP_PHY_TXn_TX_BAND			0x002C
+#define REG_DP_PHY_TXn_SLEW_CNTL		0x0030
+#define REG_DP_PHY_TXn_INTERFACE_SELECT		0x0034
+
+#define REG_DP_PHY_TXn_RES_CODE_LANE_TX		0x003C
+#define REG_DP_PHY_TXn_RES_CODE_LANE_RX		0x0040
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX	0x0044
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX	0x0048
+
+#define REG_DP_PHY_TXn_DEBUG_BUS_SEL		0x0058
+#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN	0x005C
+#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN		0x0060
+#define REG_DP_PHY_TXn_TX_POL_INV		0x0064
+#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
+
+#define REG_DP_PHY_TXn_LANE_MODE_1		0x008C
+
+#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN		0x00C0
+#define REG_DP_PHY_TXn_TX_INTERFACE_MODE	0x00C4
+
+#define REG_DP_PHY_TXn_VMODE_CTRL1		0x00F0
+
+/* PLL register offset */
+#define QSERDES_COM_ATB_SEL1			0x0000
+#define QSERDES_COM_ATB_SEL2			0x0004
+#define QSERDES_COM_FREQ_UPDATE			0x0008
+#define QSERDES_COM_BG_TIMER			0x000C
+#define QSERDES_COM_SSC_EN_CENTER		0x0010
+#define QSERDES_COM_SSC_ADJ_PER1		0x0014
+#define QSERDES_COM_SSC_ADJ_PER2		0x0018
+#define QSERDES_COM_SSC_PER1			0x001C
+#define QSERDES_COM_SSC_PER2			0x0020
+#define QSERDES_COM_SSC_STEP_SIZE1		0x0024
+#define QSERDES_COM_SSC_STEP_SIZE2		0x0028
+#define QSERDES_COM_POST_DIV			0x002C
+#define QSERDES_COM_POST_DIV_MUX		0x0030
+
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		0x0034
+#define QSERDES_COM_BIAS_EN			0x0001
+#define QSERDES_COM_BIAS_EN_MUX			0x0002
+#define QSERDES_COM_CLKBUF_R_EN			0x0004
+#define QSERDES_COM_CLKBUF_L_EN			0x0008
+#define QSERDES_COM_EN_SYSCLK_TX_SEL		0x0010
+#define QSERDES_COM_CLKBUF_RX_DRIVE_L		0x0020
+#define QSERDES_COM_CLKBUF_RX_DRIVE_R		0x0040
+
+#define QSERDES_COM_CLK_ENABLE1			0x0038
+#define QSERDES_COM_SYS_CLK_CTRL		0x003C
+#define QSERDES_COM_SYSCLK_BUF_ENABLE		0x0040
+#define QSERDES_COM_PLL_EN			0x0044
+#define QSERDES_COM_PLL_IVCO			0x0048
+#define QSERDES_COM_CMN_IETRIM			0x004C
+#define QSERDES_COM_CMN_IPTRIM			0x0050
+
+#define QSERDES_COM_CP_CTRL_MODE0		0x0060
+#define QSERDES_COM_CP_CTRL_MODE1		0x0064
+#define QSERDES_COM_PLL_RCTRL_MODE0		0x0068
+#define QSERDES_COM_PLL_RCTRL_MODE1		0x006C
+#define QSERDES_COM_PLL_CCTRL_MODE0		0x0070
+#define QSERDES_COM_PLL_CCTRL_MODE1		0x0074
+#define QSERDES_COM_PLL_CNTRL			0x0078
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM		0x007C
+#define QSERDES_COM_SYSCLK_EN_SEL		0x0080
+#define QSERDES_COM_CML_SYSCLK_SEL		0x0084
+#define QSERDES_COM_RESETSM_CNTRL		0x0088
+#define QSERDES_COM_RESETSM_CNTRL2		0x008C
+#define QSERDES_COM_LOCK_CMP_EN			0x0090
+#define QSERDES_COM_LOCK_CMP_CFG		0x0094
+#define QSERDES_COM_LOCK_CMP1_MODE0		0x0098
+#define QSERDES_COM_LOCK_CMP2_MODE0		0x009C
+#define QSERDES_COM_LOCK_CMP3_MODE0		0x00A0
+
+#define QSERDES_COM_DEC_START_MODE0		0x00B0
+#define QSERDES_COM_DEC_START_MODE1		0x00B4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0	0x00B8
+#define QSERDES_COM_DIV_FRAC_START2_MODE0	0x00BC
+#define QSERDES_COM_DIV_FRAC_START3_MODE0	0x00C0
+#define QSERDES_COM_DIV_FRAC_START1_MODE1	0x00C4
+#define QSERDES_COM_DIV_FRAC_START2_MODE1	0x00C8
+#define QSERDES_COM_DIV_FRAC_START3_MODE1	0x00CC
+#define QSERDES_COM_INTEGLOOP_INITVAL		0x00D0
+#define QSERDES_COM_INTEGLOOP_EN		0x00D4
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	0x00D8
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	0x00DC
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	0x00E0
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	0x00E4
+#define QSERDES_COM_VCOCAL_DEADMAN_CTRL		0x00E8
+#define QSERDES_COM_VCO_TUNE_CTRL		0x00EC
+#define QSERDES_COM_VCO_TUNE_MAP		0x00F0
+
+#define QSERDES_COM_CMN_STATUS			0x0124
+#define QSERDES_COM_RESET_SM_STATUS		0x0128
+
+#define QSERDES_COM_CLK_SEL			0x0138
+#define QSERDES_COM_HSCLK_SEL			0x013C
+
+#define QSERDES_COM_CORECLK_DIV_MODE0		0x0148
+
+#define QSERDES_COM_SW_RESET			0x0150
+#define QSERDES_COM_CORE_CLK_EN			0x0154
+#define QSERDES_COM_C_READY_STATUS		0x0158
+#define QSERDES_COM_CMN_CONFIG			0x015C
+
+#define QSERDES_COM_SVS_MODE_CLK_SEL		0x0164
+
+/* DP MMSS_CC registers */
+#define MMSS_DP_LINK_CMD_RCGR			(0x0138)
+#define MMSS_DP_LINK_CFG_RCGR			(0x013C)
+#define MMSS_DP_PIXEL_M				(0x0174)
+#define MMSS_DP_PIXEL_N				(0x0178)
+
+/* DP HDCP 1.3 registers */
+#define DP_HDCP_CTRL                                   (0x0A0)
+#define DP_HDCP_STATUS                                 (0x0A4)
+#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
+#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
+#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
+#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
+#define DP_HDCP_SHA_STATUS                             (0x0C8)
+#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
+#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
+#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
+#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
+#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
+
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
+
+/* USB3 DP COM registers */
+#define REG_USB3_DP_COM_RESET_OVRD_CTRL			(0x1C)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET		(0x01)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX	(0x02)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET		(0x04)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX	(0x08)
+
+#define REG_USB3_DP_COM_PHY_MODE_CTRL			(0x00)
+#define USB3_DP_COM_PHY_MODE_DP				(0x02)
+
+#define REG_USB3_DP_COM_SW_RESET			(0x04)
+#define USB3_DP_COM_SW_RESET_SET			(0x01)
+
+#define REG_USB3_DP_COM_TYPEC_CTRL			(0x10)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL			(0x01)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX		(0x02)
+
+#define REG_USB3_DP_COM_SWI_CTRL			(0x0c)
+
+#define REG_USB3_DP_COM_POWER_DOWN_CTRL			(0x08)
+#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN		(0x01)
+
+
+
+#endif /* _DP_REG_H_ */
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index c84f0a8..e5e93e3 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
 	msm_dsi_register();
 	msm_edp_register();
 	msm_hdmi_register();
+	msm_dp_register();
 	adreno_register();
 	return platform_driver_register(&msm_platform_driver);
 }
@@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
 {
 	DBG("fini");
 	platform_driver_unregister(&msm_platform_driver);
+	msm_dp_unregister();
 	msm_hdmi_unregister();
 	adreno_unregister();
 	msm_edp_unregister();
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 71547e7..8b068ec 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -159,6 +159,8 @@ struct msm_drm_private {
 	/* DSI is shared by mdp4 and mdp5 */
 	struct msm_dsi *dsi[2];
 
+	struct msm_dp *dp;
+
 	/* when we have more than one 'msm_gpu' these need to be an array: */
 	struct msm_gpu *gpu;
 	struct msm_file_private *lastctx;
@@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
 }
 #endif
 
+#ifdef CONFIG_DRM_MSM_DP
+int __init msm_dp_register(void);
+void __exit msm_dp_unregister(void);
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			 struct drm_encoder *encoder);
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder);
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder);
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode);
+
+#else
+static inline int __init msm_dp_register(void)
+{
+	return -EINVAL;
+}
+static inline void __exit msm_dp_unregister(void)
+{
+}
+static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
+				       struct drm_device *dev,
+				       struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+}
+#endif
+
 void __init msm_mdp_register(void);
 void __exit msm_mdp_unregister(void);
 void __init msm_dpu_register(void);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[DPU PATCH v3 5/5] drm/msm/dpu: add display port support in DPU

[Chandan Uddaraju]

From: Jeykumar Sankaran <jsanka@codeaurora.org>

Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

changes in V3:
-- Moved this change as part of the DP driver changes.
-- Addressed compilation issues on the latest code base.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 65 ++++++++++++++++++++++++-----
 2 files changed, 58 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 29ac7d3..f82d990 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2037,7 +2037,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;
 	struct dpu_enc_phys_init_params phys_params;
 
 	if (!dpu_enc) {
@@ -2059,9 +2059,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}
 
 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 6c92f0f..d5c290c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -421,6 +421,33 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
 	return rc;
 }
 
+static int _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc = 0;
+
+	if (!priv->dp)
+		return rc;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return PTR_ERR(encoder);;
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return rc;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;
+	return rc;
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -433,12 +460,21 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
 				    struct msm_drm_private *priv,
 				    struct dpu_kms *dpu_kms)
 {
-	/**
-	 * Extend this function to initialize other
-	 * types of displays
-	 */
+	int rc = 0;
+
+	rc = _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_dsi failed, rc = %d\n", rc);
+		return rc;
+	}
 
-	return _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	rc = _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_DP failed, rc = %d\n", rc);
+		return rc;
+	}
+
+	return rc;
 }
 
 static void _dpu_kms_drm_obj_destroy(struct dpu_kms *dpu_kms)
@@ -626,13 +662,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver

[Chandan Uddaraju]

Add the needed DP PLL specific files to support
display port interface on msm targets.

The DP driver calls the DP PLL driver registration.
The DP driver sets the link and pixel clock sources.

Changes in v2:
-- Update copyright markings on all relevant files.
-- Use DRM_DEBUG_DP for debug msgs.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                   |  13 +
 drivers/gpu/drm/msm/Makefile                  |   4 +
 drivers/gpu/drm/msm/dp/dp_display.c           |  48 +++
 drivers/gpu/drm/msm/dp/dp_display.h           |   3 +
 drivers/gpu/drm/msm/dp/dp_parser.h            |   4 +
 drivers/gpu/drm/msm/dp/dp_power.h             |   1 -
 drivers/gpu/drm/msm/dp/pll/dp_pll.c           | 135 +++++++
 drivers/gpu/drm/msm/dp/pll/dp_pll.h           |  57 +++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c      | 401 +++++++++++++++++++++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h      |  86 +++++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c | 494 ++++++++++++++++++++++++++
 11 files changed, 1245 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll.c
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll.h
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 7946cb1..e73ad23 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -66,6 +66,19 @@ config DRM_MSM_DP
 	  display support is enabled through this config option. It can
 	  be primary or secondary display on device.
 
+config DRM_MSM_DP_PLL
+	bool "Enable DP PLL driver in MSM DRM"
+	depends on DRM_MSM_DP && COMMON_CLK
+	help
+	  Choose this option to enable DP PLL driver which provides DP
+	  source clocks under common clock framework.
+
+config DRM_MSM_DP_10NM_PLL
+	bool "Enable DP 10nm PLL driver in MSM DRM (used by SDM845)"
+	depends on DRM_MSM_DP_PLL
+	help
+	  Choose this option if DP PLL on SDM845 is used on the platform.
+
 config DRM_MSM_DSI
 	bool "Enable DSI support in MSM DRM driver"
 	depends on DRM_MSM
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 5939f41..3ba0c8b 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -140,4 +140,8 @@ msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
 msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
 endif
 
+msm-$(CONFIG_DRM_MSM_DP_PLL)+= dp/pll/dp_pll.o
+msm-$(CONFIG_DRM_MSM_DP_10NM_PLL)+= dp/pll/dp_pll_10nm.o \
+	dp/pll/dp_pll_10nm_util.o
+
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a893542..b57a8c1 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -61,6 +61,48 @@ struct dp_display_private {
 	{}
 };
 
+static int dp_get_pll(struct dp_display_private *dp_priv)
+{
+	struct platform_device *pdev = NULL;
+	struct platform_device *pll_pdev;
+	struct device_node *pll_node;
+	struct dp_parser *dp_parser = NULL;
+
+	if (!dp_priv) {
+		DRM_ERROR("Invalid Arguments\n");
+		return -EINVAL;
+	}
+
+	pdev = dp_priv->pdev;
+	dp_parser = dp_priv->parser;
+
+	if (!dp_parser) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: Parser not initialized\n", __func__);
+		return -EINVAL;
+	}
+
+	pll_node = of_parse_phandle(pdev->dev.of_node, "pll-node", 0);
+	if (!pll_node) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: cannot find pll device\n", __func__);
+		return -ENXIO;
+	}
+
+	pll_pdev = of_find_device_by_node(pll_node);
+	if (pll_pdev)
+		dp_parser->pll = platform_get_drvdata(pll_pdev);
+
+	of_node_put(pll_node);
+
+	if (!pll_pdev || !dp_parser->pll) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: pll driver is not ready\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	dp_parser->pll_dev = get_device(&pll_pdev->dev);
+
+	return 0;
+}
+
 static irqreturn_t dp_display_irq(int irq, void *dev_id)
 {
 	struct dp_display_private *dp = dev_id;
@@ -114,6 +156,10 @@ static int dp_display_bind(struct device *dev, struct device *master,
 		goto end;
 	}
 
+	rc = dp_get_pll(dp);
+	if (rc)
+		goto end;
+
 	rc = dp_aux_register(dp->aux);
 	if (rc) {
 		DRM_ERROR("DRM DP AUX register failed\n");
@@ -812,6 +858,7 @@ int __init msm_dp_register(void)
 {
 	int ret;
 
+	msm_dp_pll_driver_register();
 	ret = platform_driver_register(&dp_display_driver);
 	if (ret) {
 		DRM_ERROR("driver register failed");
@@ -823,6 +870,7 @@ int __init msm_dp_register(void)
 
 void __exit msm_dp_unregister(void)
 {
+	msm_dp_pll_driver_unregister();
 	platform_driver_unregister(&dp_display_driver);
 }
 
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index c916408..f575d2c 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -26,4 +26,7 @@ int dp_display_get_modes(struct msm_dp *dp_display,
 bool dp_display_check_video_test(struct msm_dp *dp_display);
 int dp_display_get_test_bpp(struct msm_dp *dp_display);
 
+void __init msm_dp_pll_driver_register(void);
+void __exit msm_dp_pll_driver_unregister(void);
+
 #endif /* _DP_DISPLAY_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index b606b40..0e9e380 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -6,6 +6,8 @@
 #ifndef _DP_PARSER_H_
 #define _DP_PARSER_H_
 
+#include "pll/dp_pll.h"
+
 #define DP_LABEL "MDSS DP DISPLAY"
 #define AUX_CFG_LEN	10
 #define DP_MAX_PIXEL_CLK_KHZ	675000
@@ -192,6 +194,8 @@ struct dp_parser {
 	bool combo_phy_en;
 	struct dp_io io;
 	struct dp_display_data disp_data;
+	struct msm_dp_pll *pll;
+	struct device *pll_dev;
 	const struct dp_regulator_cfg *regulator_cfg;
 	u8 l_map[4];
 	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
index 40d7e73..76e2d3b 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.h
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -14,7 +14,6 @@
  * @init: initializes the regulators/core clocks/GPIOs/pinctrl
  * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
  * @clk_enable: enable/disable the DP clocks
- * @set_link_clk_parent: set the parent of DP link clock
  * @set_pixel_clk_parent: set the parent of DP pixel clock
  */
 struct dp_power {
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll.c b/drivers/gpu/drm/msm/dp/pll/dp_pll.c
new file mode 100644
index 0000000..33faea8
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include "dp_pll.h"
+
+int msm_dp_pll_util_parse_dt_clock(struct platform_device *pdev,
+					struct msm_dp_pll *pll)
+{
+	u32 i = 0, rc = 0;
+	struct dss_module_power *mp = &pll->mp;
+	const char *clock_name;
+	u32 clock_rate;
+
+	mp->num_clk = of_property_count_strings(pdev->dev.of_node,
+							"clock-names");
+	if (mp->num_clk <= 0) {
+		DRM_DEV_ERROR(&pdev->dev, "%s:clocks are not defined\n", __func__);
+		goto clk_err;
+	}
+
+	mp->clk_config = devm_kzalloc(&pdev->dev,
+			sizeof(struct dss_clk) * mp->num_clk, GFP_KERNEL);
+	if (!mp->clk_config) {
+		rc = -ENOMEM;
+		mp->num_clk = 0;
+		goto clk_err;
+	}
+
+	for (i = 0; i < mp->num_clk; i++) {
+		of_property_read_string_index(pdev->dev.of_node, "clock-names",
+							i, &clock_name);
+		strlcpy(mp->clk_config[i].clk_name, clock_name,
+				sizeof(mp->clk_config[i].clk_name));
+
+		of_property_read_u32_index(pdev->dev.of_node, "clock-rate",
+							i, &clock_rate);
+		mp->clk_config[i].rate = clock_rate;
+
+		if (!clock_rate)
+			mp->clk_config[i].type = DSS_CLK_AHB;
+		else
+			mp->clk_config[i].type = DSS_CLK_PCLK;
+	}
+
+clk_err:
+	return rc;
+}
+
+struct msm_dp_pll *msm_dp_pll_init(struct platform_device *pdev,
+			enum msm_dp_pll_type type, int id)
+{
+	struct device *dev = &pdev->dev;
+	struct msm_dp_pll *pll;
+
+	switch (type) {
+	case MSM_DP_PLL_10NM:
+		pll = msm_dp_pll_10nm_init(pdev, id);
+		break;
+	default:
+		pll = ERR_PTR(-ENXIO);
+		break;
+	}
+
+	if (IS_ERR(pll)) {
+		DRM_DEV_ERROR(dev, "%s: failed to init DP PLL\n", __func__);
+		return pll;
+	}
+
+	pll->type = type;
+
+	DRM_DEBUG_DP("DP:%d PLL registered", id);
+
+	return pll;
+}
+
+static const struct of_device_id dp_pll_dt_match[] = {
+	{ .compatible = "qcom,dp-pll-10nm" },
+};
+
+static int dp_pll_driver_probe(struct platform_device *pdev)
+{
+	struct msm_dp_pll *pll;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+
+	match = of_match_node(dp_pll_dt_match, dev->of_node);
+	if (!match)
+		return -ENODEV;
+
+	/* Currently supporting only 10nm-DP PLL */
+	pll = msm_dp_pll_init(pdev, MSM_DP_PLL_10NM, 0);
+	if (IS_ERR_OR_NULL(pll)) {
+		DRM_DEV_ERROR(dev,
+			"%s: pll init failed: %ld, need separate pll clk driver\n",
+			__func__, PTR_ERR(pll));
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pll);
+
+	return 0;
+}
+
+static int dp_pll_driver_remove(struct platform_device *pdev)
+{
+	struct msm_dp_pll *pll = platform_get_drvdata(pdev);
+
+	if (pll)
+		pll = NULL;
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver dp_pll_platform_driver = {
+	.probe      = dp_pll_driver_probe,
+	.remove     = dp_pll_driver_remove,
+	.driver     = {
+		.name   = "msm_dp_pll",
+		.of_match_table = dp_pll_dt_match,
+	},
+};
+
+void __init msm_dp_pll_driver_register(void)
+{
+	platform_driver_register(&dp_pll_platform_driver);
+}
+
+void __exit msm_dp_pll_driver_unregister(void)
+{
+	platform_driver_unregister(&dp_pll_platform_driver);
+}
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll.h b/drivers/gpu/drm/msm/dp/pll/dp_pll.h
new file mode 100644
index 0000000..07ce822
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DP_PLL_H
+#define __DP_PLL_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "dpu_io_util.h"
+#include "msm_drv.h"
+
+#define PLL_REG_W(base, offset, data)	\
+				writel((data), (base) + (offset))
+#define PLL_REG_R(base, offset)	readl((base) + (offset))
+
+enum msm_dp_pll_type {
+	MSM_DP_PLL_10NM,
+	MSM_DP_PLL_MAX
+};
+
+struct msm_dp_pll {
+	enum msm_dp_pll_type type;
+	struct clk_hw clk_hw;
+	unsigned long	rate;		/* current vco rate */
+	u64		min_rate;	/* min vco rate */
+	u64		max_rate;	/* max vco rate */
+	bool		pll_on;
+	void		*priv;
+	/* Pll specific resources like GPIO, power supply, clocks, etc*/
+	struct dss_module_power mp;
+	int (*get_provider)(struct msm_dp_pll *pll,
+			struct clk **link_clk_provider,
+			struct clk **pixel_clk_provider);
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct msm_dp_pll, clk_hw)
+
+struct msm_dp_pll *msm_dp_pll_init(struct platform_device *pdev,
+				enum msm_dp_pll_type type, int id);
+
+int msm_dp_pll_util_parse_dt_clock(struct platform_device *pdev,
+				struct msm_dp_pll *pll);
+
+#ifdef CONFIG_DRM_MSM_DP_10NM_PLL
+struct msm_dp_pll *msm_dp_pll_10nm_init(struct platform_device *pdev, int id);
+#else
+static inline struct msm_dp_pll *msm_dp_pll_10nm_init
+				(struct platform_device *pdev, int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+#endif /* __DP_PLL_H */
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
new file mode 100644
index 0000000..6ef2492
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ *              +------------------------------+
+ *              |         DP_VCO_CLK           |
+ *              |                              |
+ *              |    +-------------------+     |
+ *              |    |   (DP PLL/VCO)    |     |
+ *              |    +---------+---------+     |
+ *              |              v               |
+ *              |   +----------+-----------+   |
+ *              |   | hsclk_divsel_clk_src |   |
+ *              |   +----------+-----------+   |
+ *              +------------------------------+
+ *                              |
+ *          +---------<---------v------------>----------+
+ *          |                                           |
+ * +--------v---------+                                 |
+ * | dp_link_clk_src  |                                 |
+ * |    divsel_ten    |                                 |
+ * +--------+---------+                                 |
+ *          |                                           |
+ *          |                                           |
+ *          v                                           v
+ * Input to DISPCC block                                |
+ * for link clk, crypto clk                             |
+ * and interface clock                                  |
+ *                                                      |
+ *                                                      |
+ *      +--------<------------+-----------------+---<---+
+ *      |                     |                 |
+ * +----v---------+  +--------v-----+  +--------v------+
+ * | vco_divided  |  | vco_divided  |  | vco_divided   |
+ * |    _clk_src  |  |    _clk_src  |  |    _clk_src   |
+ * |              |  |              |  |               |
+ * |divsel_six    |  |  divsel_two  |  |  divsel_four  |
+ * +-------+------+  +-----+--------+  +--------+------+
+ *         |                 |                  |
+ *         v---->----------v-------------<------v
+ *                         |
+ *              +----------+---------+
+ *              |   vco_divided_clk  |
+ *              |       _src_mux     |
+ *              +---------+----------+
+ *                        |
+ *                        v
+ *              Input to DISPCC block
+ *              for DP pixel clock
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#include "dp_pll_10nm.h"
+
+#define NUM_PROVIDED_CLKS		2
+
+#define DP_LINK_CLK_SRC			0
+#define DP_PIXEL_CLK_SRC		1
+
+static struct dp_pll_10nm *dp_pdb;
+
+static const struct clk_ops dp_10nm_vco_clk_ops = {
+	.recalc_rate = dp_vco_recalc_rate_10nm,
+	.set_rate = dp_vco_set_rate_10nm,
+	.round_rate = dp_vco_round_rate_10nm,
+	.prepare = dp_vco_prepare_10nm,
+	.unprepare = dp_vco_unprepare_10nm,
+};
+
+struct dp_pll_10nm_pclksel {
+	struct clk_hw hw;
+
+	/* divider params */
+	u8 shift;
+	u8 width;
+	u8 flags; /* same flags as used by clk_divider struct */
+
+	struct dp_pll_10nm *pll;
+};
+#define to_pll_10nm_pclksel(_hw) container_of(_hw, struct dp_pll_10nm_pclksel, hw)
+
+static int dp_mux_set_parent_10nm(struct clk_hw *hw, u8 val)
+{
+	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
+	struct dp_pll_10nm *dp_res = pclksel->pll;
+	u32 auxclk_div;
+
+	auxclk_div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_VCO_DIV);
+	auxclk_div &= ~0x03;	/* bits 0 to 1 */
+
+	if (val == 0) /* mux parent index = 0 */
+		auxclk_div |= 1;
+	else if (val == 1) /* mux parent index = 1 */
+		auxclk_div |= 2;
+	else if (val == 2) /* mux parent index = 2 */
+		auxclk_div |= 0;
+
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_VCO_DIV, auxclk_div);
+	DRM_DEBUG_DP("%s: mux=%d auxclk_div=%x\n", __func__, val, auxclk_div);
+
+	return 0;
+}
+
+static u8 dp_mux_get_parent_10nm(struct clk_hw *hw)
+{
+	u32 auxclk_div = 0;
+	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
+	struct dp_pll_10nm *dp_res = pclksel->pll;
+	u8 val = 0;
+
+	DRM_ERROR("clk_hw->init->name = %s\n", hw->init->name);
+	auxclk_div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_VCO_DIV);
+	auxclk_div &= 0x03;
+
+	if (auxclk_div == 1) /* Default divider */
+		val = 0;
+	else if (auxclk_div == 2)
+		val = 1;
+	else if (auxclk_div == 0)
+		val = 2;
+
+	DRM_DEBUG_DP("%s: auxclk_div=%d, val=%d\n", __func__, auxclk_div, val);
+
+	return val;
+}
+
+static int clk_mux_determine_rate(struct clk_hw *hw,
+				     struct clk_rate_request *req)
+{
+	unsigned long rate = 0;
+	int ret = 0;
+
+	rate = clk_get_rate(hw->clk);
+
+	if (rate <= 0) {
+		DRM_ERROR("Rate is not set properly\n");
+		return -EINVAL;
+	}
+
+	req->rate = rate;
+
+	DRM_DEBUG_DP("%s: rate=%ld\n", __func__, req->rate);
+	/* Set the new parent of mux if there is a new valid parent */
+	if (hw->clk && req->best_parent_hw->clk) {
+		ret = clk_set_parent(hw->clk, req->best_parent_hw->clk);
+		if (ret) {
+			DRM_ERROR("%s: clk_set_parent failed: ret=%d\n", __func__, ret);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static unsigned long mux_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk *div_clk = NULL, *vco_clk = NULL;
+	struct msm_dp_pll *vco = NULL;
+
+	div_clk = clk_get_parent(hw->clk);
+	if (!div_clk)
+		return 0;
+
+	vco_clk = clk_get_parent(div_clk);
+	if (!vco_clk)
+		return 0;
+
+	vco = hw_clk_to_pll(__clk_get_hw(vco_clk));
+	if (!vco)
+		return 0;
+
+	if (vco->rate == DP_VCO_HSCLK_RATE_8100MHZDIV1000)
+		return (vco->rate / 6);
+	else if (vco->rate == DP_VCO_HSCLK_RATE_5400MHZDIV1000)
+		return (vco->rate / 4);
+	else
+		return (vco->rate / 2);
+}
+
+static int dp_pll_10nm_get_provider(struct msm_dp_pll *pll,
+				     struct clk **link_clk_provider,
+				     struct clk **pixel_clk_provider)
+{
+	struct dp_pll_10nm *pll_10nm = to_dp_pll_10nm(pll);
+	struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data;
+
+	if (link_clk_provider)
+		*link_clk_provider = hw_data->hws[DP_LINK_CLK_SRC]->clk;
+	if (pixel_clk_provider)
+		*pixel_clk_provider = hw_data->hws[DP_PIXEL_CLK_SRC]->clk;
+
+	return 0;
+}
+
+static const struct clk_ops dp_10nm_pclksel_clk_ops = {
+	.get_parent = dp_mux_get_parent_10nm,
+	.set_parent = dp_mux_set_parent_10nm,
+	.recalc_rate = mux_recalc_rate,
+	.determine_rate = clk_mux_determine_rate,
+};
+
+static struct clk_hw *dp_pll_10nm_pixel_clk_sel(struct dp_pll_10nm *pll_10nm)
+{
+	struct device *dev = &pll_10nm->pdev->dev;
+	struct dp_pll_10nm_pclksel *pll_pclksel;
+	struct clk_init_data pclksel_init = {
+		.parent_names = (const char *[]){
+				"dp_vco_divsel_two_clk_src",
+				"dp_vco_divsel_four_clk_src",
+				"dp_vco_divsel_six_clk_src" },
+		.num_parents = 3,
+		.name = "dp_vco_divided_clk_src_mux",
+		.flags = CLK_IGNORE_UNUSED,
+		.ops = &dp_10nm_pclksel_clk_ops,
+	};
+	int ret;
+
+	pll_pclksel = devm_kzalloc(dev, sizeof(*pll_pclksel), GFP_KERNEL);
+	if (!pll_pclksel)
+		return ERR_PTR(-ENOMEM);
+
+	pll_pclksel->pll = pll_10nm;
+	pll_pclksel->shift = 0;
+	pll_pclksel->width = 4;
+	pll_pclksel->flags = CLK_DIVIDER_ONE_BASED;
+	pll_pclksel->hw.init = &pclksel_init;
+
+	ret = clk_hw_register(dev, &pll_pclksel->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &pll_pclksel->hw;
+}
+
+static int dp_pll_10nm_register(struct dp_pll_10nm *pll_10nm)
+{
+	char clk_name[32], parent[32], vco_name[32];
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "bi_tcxo" },
+		.num_parents = 1,
+		.name = vco_name,
+		.flags = CLK_IGNORE_UNUSED,
+		.ops = &dp_10nm_vco_clk_ops,
+	};
+	struct device *dev = &pll_10nm->pdev->dev;
+	struct clk_hw **hws = pll_10nm->hws;
+	struct clk_hw_onecell_data *hw_data;
+	struct clk_hw *hw;
+	int num = 0;
+	int ret;
+
+	DRM_DEBUG_DP("DP->id = %d", pll_10nm->id);
+
+	hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+			       NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	snprintf(vco_name, 32, "dp_vco_clk");
+	pll_10nm->base.clk_hw.init = &vco_init;
+	ret = clk_hw_register(dev, &pll_10nm->base.clk_hw);
+	if (ret)
+		return ret;
+	hws[num++] = &pll_10nm->base.clk_hw;
+
+	snprintf(clk_name, 32, "dp_link_clk_divsel_ten");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  CLK_SET_RATE_PARENT, 1, 10);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+	hw_data->hws[DP_LINK_CLK_SRC] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_two_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 2);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_four_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 4);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_six_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 6);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	hw = dp_pll_10nm_pixel_clk_sel(pll_10nm);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+	hw_data->hws[DP_PIXEL_CLK_SRC] = hw;
+
+	pll_10nm->num_hws = num;
+
+	hw_data->num = NUM_PROVIDED_CLKS;
+	pll_10nm->hw_data = hw_data;
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				     pll_10nm->hw_data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+struct msm_dp_pll *msm_dp_pll_10nm_init(struct platform_device *pdev, int id)
+{
+	struct dp_pll_10nm *dp_10nm_pll;
+	struct msm_dp_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	dp_10nm_pll = devm_kzalloc(&pdev->dev, sizeof(*dp_10nm_pll), GFP_KERNEL);
+	if (!dp_10nm_pll)
+		return ERR_PTR(-ENOMEM);
+
+	DRM_DEBUG_DP("DP PLL%d", id);
+
+	dp_10nm_pll->pdev = pdev;
+	dp_10nm_pll->id = id;
+	dp_pdb = dp_10nm_pll;
+
+	dp_10nm_pll->pll_base = msm_ioremap(pdev, "pll_base", "DP_PLL");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->pll_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PLL base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->phy_base = msm_ioremap(pdev, "phy_base", "DP_PHY");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->phy_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->ln_tx0_base = msm_ioremap(pdev, "ln_tx0_base", "DP_LN_TX0");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->ln_tx0_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN LN_TX0 base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->ln_tx1_base = msm_ioremap(pdev, "ln_tx1_base", "DP_LN_TX1");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->ln_tx1_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN LN_TX1 base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "cell-index",
+				&dp_10nm_pll->index);
+	if (ret) {
+		DRM_ERROR("Unable to get the cell-index ret=%d\n", ret);
+		dp_10nm_pll->index = 0;
+	}
+
+	ret = msm_dp_pll_util_parse_dt_clock(pdev, &dp_10nm_pll->base);
+	if (ret) {
+		DRM_ERROR("Unable to parse dt clocks ret=%d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	ret = dp_pll_10nm_register(dp_10nm_pll);
+	if (ret) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	pll = &dp_10nm_pll->base;
+	pll->min_rate = DP_VCO_HSCLK_RATE_1620MHZDIV1000;
+	pll->max_rate = DP_VCO_HSCLK_RATE_8100MHZDIV1000;
+	pll->get_provider = dp_pll_10nm_get_provider;
+
+	return pll;
+}
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
new file mode 100644
index 0000000..e2a5337
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DP_PLL_10NM_H
+#define __DP_PLL_10NM_H
+
+#include "dp_pll.h"
+#include "dp_reg.h"
+
+#define DP_VCO_HSCLK_RATE_1620MHZDIV1000	1620000UL
+#define DP_VCO_HSCLK_RATE_2700MHZDIV1000	2700000UL
+#define DP_VCO_HSCLK_RATE_5400MHZDIV1000	5400000UL
+#define DP_VCO_HSCLK_RATE_8100MHZDIV1000	8100000UL
+
+#define NUM_DP_CLOCKS_MAX			6
+
+#define DP_PHY_PLL_POLL_SLEEP_US		500
+#define DP_PHY_PLL_POLL_TIMEOUT_US		10000
+
+#define DP_VCO_RATE_8100MHZDIV1000		8100000UL
+#define DP_VCO_RATE_9720MHZDIV1000		9720000UL
+#define DP_VCO_RATE_10800MHZDIV1000		10800000UL
+
+struct dp_pll_10nm {
+	struct msm_dp_pll base;
+
+	int id;
+	struct platform_device *pdev;
+
+	void __iomem *pll_base;
+	void __iomem *phy_base;
+	void __iomem *ln_tx0_base;
+	void __iomem *ln_tx1_base;
+
+	/* private clocks: */
+	struct clk_hw *hws[NUM_DP_CLOCKS_MAX];
+	u32 num_hws;
+
+	/* clock-provider: */
+	struct clk_hw_onecell_data *hw_data;
+
+	/* lane and orientation settings */
+	u8 lane_cnt;
+	u8 orientation;
+
+	/* COM PHY settings */
+	u32 hsclk_sel;
+	u32 dec_start_mode0;
+	u32 div_frac_start1_mode0;
+	u32 div_frac_start2_mode0;
+	u32 div_frac_start3_mode0;
+	u32 integloop_gain0_mode0;
+	u32 integloop_gain1_mode0;
+	u32 vco_tune_map;
+	u32 lock_cmp1_mode0;
+	u32 lock_cmp2_mode0;
+	u32 lock_cmp3_mode0;
+	u32 lock_cmp_en;
+
+	/* PHY vco divider */
+	u32 phy_vco_div;
+	/*
+	 * Certain pll's needs to update the same vco rate after resume in
+	 * suspend/resume scenario. Cached the vco rate for such plls.
+	 */
+	unsigned long	vco_cached_rate;
+	u32		cached_cfg0;
+	u32		cached_cfg1;
+	u32		cached_outdiv;
+
+	uint32_t index;
+};
+
+#define to_dp_pll_10nm(x)	container_of(x, struct dp_pll_10nm, base)
+
+int dp_vco_set_rate_10nm(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long dp_vco_recalc_rate_10nm(struct clk_hw *hw,
+				unsigned long parent_rate);
+long dp_vco_round_rate_10nm(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate);
+int dp_vco_prepare_10nm(struct clk_hw *hw);
+void dp_vco_unprepare_10nm(struct clk_hw *hw);
+#endif /* __DP_PLL_10NM_H */
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c
new file mode 100644
index 0000000..b8f7def
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"%s: " fmt, __func__
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+
+#include "dp_extcon.h"
+#include "dp_pll.h"
+#include "dp_pll_10nm.h"
+
+static int dp_vco_pll_init_db_10nm(struct msm_dp_pll *pll,
+		unsigned long rate)
+{
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 spare_value = 0;
+
+	spare_value = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_SPARE0);
+	dp_res->lane_cnt = spare_value & 0x0F;
+	dp_res->orientation = (spare_value & 0xF0) >> 4;
+
+	DRM_DEBUG_DP("%s: spare_value=0x%x, ln_cnt=0x%x, orientation=0x%x\n",
+			__func__, spare_value, dp_res->lane_cnt, dp_res->orientation);
+
+	switch (rate) {
+	case DP_VCO_HSCLK_RATE_1620MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_9720MHZDIV1000);
+		dp_res->hsclk_sel = 0x0c;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x6f;
+		dp_res->lock_cmp2_mode0 = 0x08;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x1;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_2700MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_10800MHZDIV1000);
+		dp_res->hsclk_sel = 0x04;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x0f;
+		dp_res->lock_cmp2_mode0 = 0x0e;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x1;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_5400MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_10800MHZDIV1000);
+		dp_res->hsclk_sel = 0x00;
+		dp_res->dec_start_mode0 = 0x8c;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x00;
+		dp_res->div_frac_start3_mode0 = 0x0a;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x1f;
+		dp_res->lock_cmp2_mode0 = 0x1c;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x2;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_8100MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_8100MHZDIV1000);
+		dp_res->hsclk_sel = 0x03;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x2f;
+		dp_res->lock_cmp2_mode0 = 0x2a;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x0;
+		dp_res->lock_cmp_en = 0x08;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int dp_config_vco_rate_10nm(struct msm_dp_pll *pll,
+		unsigned long rate)
+{
+	u32 res = 0;
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	res = dp_vco_pll_init_db_10nm(pll, rate);
+	if (res) {
+		DRM_ERROR("VCO Init DB failed\n");
+		return res;
+	}
+
+	if (dp_res->lane_cnt != 4) {
+		if (dp_res->orientation == ORIENTATION_CC2)
+			PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x6d);
+		else
+			PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x75);
+	} else {
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x7d);
+	}
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SVS_MODE_CLK_SEL, 0x01);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYSCLK_EN_SEL, 0x37);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYS_CLK_CTRL, 0x02);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CLK_ENABLE1, 0x0e);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYSCLK_BUF_ENABLE, 0x06);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CLK_SEL, 0x30);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CMN_CONFIG, 0x02);
+
+	/* Different for each clock rates */
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_HSCLK_SEL, dp_res->hsclk_sel);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DEC_START_MODE0, dp_res->dec_start_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START1_MODE0, dp_res->div_frac_start1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START2_MODE0, dp_res->div_frac_start2_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START3_MODE0, dp_res->div_frac_start3_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_INTEGLOOP_GAIN0_MODE0, dp_res->integloop_gain0_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_INTEGLOOP_GAIN1_MODE0, dp_res->integloop_gain1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_VCO_TUNE_MAP, dp_res->vco_tune_map);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP1_MODE0, dp_res->lock_cmp1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP2_MODE0, dp_res->lock_cmp2_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP3_MODE0, dp_res->lock_cmp3_mode0);
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_BG_TIMER, 0x0a);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CORECLK_DIV_MODE0, 0x0a);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_VCO_TUNE_CTRL, 0x00);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3f);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CORE_CLK_EN, 0x1f);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_IVCO, 0x07);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP_EN, dp_res->lock_cmp_en);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_CCTRL_MODE0, 0x36);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CP_CTRL_MODE0, 0x06);
+
+	if (dp_res->orientation == ORIENTATION_CC2)
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_MODE, 0x4c);
+	else
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_MODE, 0x5c);
+
+	/* TX Lane configuration */
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_TX0_TX1_LANE_CTL, 0x05);
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_TX2_TX3_LANE_CTL, 0x05);
+
+	/* TX-0 register configuration */
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, 0x1a);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_VMODE_CTRL1, 0x40);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN, 0x30);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_INTERFACE_SELECT, 0x3d);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_CLKBUF_ENABLE, 0x0f);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RESET_TSYNC_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx0_base,
+		REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN, 0x00);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_INTERFACE_MODE, 0x00);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_BAND, 0x4);
+
+	/* TX-1 register configuration */
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, 0x1a);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_VMODE_CTRL1, 0x40);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN, 0x30);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_INTERFACE_SELECT, 0x3d);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_CLKBUF_ENABLE, 0x0f);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RESET_TSYNC_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx1_base,
+		REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN, 0x00);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_INTERFACE_MODE, 0x00);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_BAND, 0x4);
+
+	/* dependent on the vco frequency */
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_VCO_DIV, dp_res->phy_vco_div);
+
+	return res;
+}
+
+static bool dp_10nm_pll_lock_status(struct dp_pll_10nm *dp_res)
+{
+	u32 status;
+	bool pll_locked;
+
+	/* poll for PLL lock status */
+	if (readl_poll_timeout_atomic((dp_res->pll_base +
+			QSERDES_COM_C_READY_STATUS),
+			status,
+			((status & BIT(0)) > 0),
+			DP_PHY_PLL_POLL_SLEEP_US,
+			DP_PHY_PLL_POLL_TIMEOUT_US)) {
+		DRM_ERROR("%s: C_READY status is not high. Status=%x\n",
+				__func__, status);
+		pll_locked = false;
+	} else {
+		pll_locked = true;
+	}
+
+	return pll_locked;
+}
+
+static bool dp_10nm_phy_rdy_status(struct dp_pll_10nm *dp_res)
+{
+	u32 status;
+	bool phy_ready = true;
+
+	/* poll for PHY ready status */
+	if (readl_poll_timeout_atomic((dp_res->phy_base +
+			REG_DP_PHY_STATUS),
+			status,
+			((status & (BIT(1))) > 0),
+			DP_PHY_PLL_POLL_SLEEP_US,
+			DP_PHY_PLL_POLL_TIMEOUT_US)) {
+		DRM_ERROR("%s: Phy_ready is not high. Status=%x\n",
+				__func__, status);
+		phy_ready = false;
+	}
+
+	return phy_ready;
+}
+
+static int dp_pll_enable_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 bias_en, drvr_en;
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_AUX_CFG2, 0x04);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x01);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x05);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x01);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x09);
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_RESETSM_CNTRL, 0x20);
+
+	if (!dp_10nm_pll_lock_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x19);
+	/* poll for PHY ready status */
+	if (!dp_10nm_phy_rdy_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	DRM_DEBUG_DP("%s: PLL is locked\n", __func__);
+
+	if (dp_res->lane_cnt == 1) {
+		bias_en = 0x3e;
+		drvr_en = 0x13;
+	} else {
+		bias_en = 0x3f;
+		drvr_en = 0x10;
+	}
+
+	if (dp_res->lane_cnt != 4) {
+		if (dp_res->orientation == ORIENTATION_CC1) {
+			PLL_REG_W(dp_res->ln_tx1_base,
+				REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+			PLL_REG_W(dp_res->ln_tx1_base,
+				REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		} else {
+			PLL_REG_W(dp_res->ln_tx0_base,
+				REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+			PLL_REG_W(dp_res->ln_tx0_base,
+				REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		}
+	} else {
+		PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+		PLL_REG_W(dp_res->ln_tx0_base,
+			REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+		PLL_REG_W(dp_res->ln_tx1_base,
+			REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+	}
+
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_POL_INV, 0x0a);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_POL_INV, 0x0a);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x18);
+	udelay(2000);
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x19);
+
+	/* poll for PHY ready status */
+	if (!dp_10nm_phy_rdy_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_DRV_LVL, 0x38);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_DRV_LVL, 0x38);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, 0x20);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, 0x20);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX, 0x06);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX, 0x06);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX, 0x07);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX, 0x07);
+
+lock_err:
+	return rc;
+}
+
+static int dp_pll_disable_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	/* Assert DP PHY power down */
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x2);
+
+	return rc;
+}
+
+
+int dp_vco_prepare_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	DRM_DEBUG_DP("%s: rate = %ld\n", __func__, pll->rate);
+	if ((dp_res->vco_cached_rate != 0)
+		&& (dp_res->vco_cached_rate == pll->rate)) {
+		rc = dp_vco_set_rate_10nm(hw,
+			dp_res->vco_cached_rate, dp_res->vco_cached_rate);
+		if (rc) {
+			DRM_ERROR("index=%d vco_set_rate failed. rc=%d\n",
+				rc, dp_res->index);
+			goto error;
+		}
+	}
+
+	rc = dp_pll_enable_10nm(hw);
+	if (rc) {
+		DRM_ERROR("ndx=%d failed to enable dp pll\n",
+					dp_res->index);
+		goto error;
+	}
+
+	pll->pll_on = true;
+error:
+	return rc;
+}
+
+void dp_vco_unprepare_10nm(struct clk_hw *hw)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	if (!dp_res) {
+		DRM_ERROR("Invalid input parameter\n");
+		return;
+	}
+
+	if (!pll->pll_on) {
+		DRM_ERROR("pll resource can't be enabled\n");
+		return;
+	}
+	dp_res->vco_cached_rate = pll->rate;
+	dp_pll_disable_10nm(hw);
+
+	pll->pll_on = false;
+}
+
+int dp_vco_set_rate_10nm(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	int rc;
+
+	DRM_DEBUG_DP("DP lane CLK rate=%ld\n", rate);
+
+	rc = dp_config_vco_rate_10nm(pll, rate);
+	if (rc)
+		DRM_ERROR("%s: Failed to set clk rate\n", __func__);
+
+	pll->rate = rate;
+
+	return 0;
+}
+
+unsigned long dp_vco_recalc_rate_10nm(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 div, hsclk_div, link_clk_div = 0;
+	u64 vco_rate;
+
+	div = PLL_REG_R(dp_res->pll_base, QSERDES_COM_HSCLK_SEL);
+	div &= 0x0f;
+
+	if (div == 12)
+		hsclk_div = 6; /* Default */
+	else if (div == 4)
+		hsclk_div = 4;
+	else if (div == 0)
+		hsclk_div = 2;
+	else if (div == 3)
+		hsclk_div = 1;
+	else {
+		DRM_DEBUG_DP("unknown divider. forcing to default\n");
+		hsclk_div = 5;
+	}
+
+	div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_AUX_CFG2);
+	div >>= 2;
+
+	if ((div & 0x3) == 0)
+		link_clk_div = 5;
+	else if ((div & 0x3) == 1)
+		link_clk_div = 10;
+	else if ((div & 0x3) == 2)
+		link_clk_div = 20;
+	else
+		DRM_ERROR("%s: unsupported div. Phy_mode: %d\n", __func__, div);
+
+	if (link_clk_div == 20) {
+		vco_rate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+	} else {
+		if (hsclk_div == 6)
+			vco_rate = DP_VCO_HSCLK_RATE_1620MHZDIV1000;
+		else if (hsclk_div == 4)
+			vco_rate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+		else if (hsclk_div == 2)
+			vco_rate = DP_VCO_HSCLK_RATE_5400MHZDIV1000;
+		else
+			vco_rate = DP_VCO_HSCLK_RATE_8100MHZDIV1000;
+	}
+
+	DRM_DEBUG_DP("returning vco rate = %lu\n", (unsigned long)vco_rate);
+
+	dp_res->vco_cached_rate = pll->rate = vco_rate;
+	return (unsigned long)vco_rate;
+}
+
+long dp_vco_round_rate_10nm(struct clk_hw *hw, unsigned long rate,
+			unsigned long *parent_rate)
+{
+	unsigned long rrate = rate;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+
+	if (rate <= pll->min_rate)
+		rrate = pll->min_rate;
+	else if (rate <= DP_VCO_HSCLK_RATE_2700MHZDIV1000)
+		rrate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+	else if (rate <= DP_VCO_HSCLK_RATE_5400MHZDIV1000)
+		rrate = DP_VCO_HSCLK_RATE_5400MHZDIV1000;
+	else
+		rrate = pll->max_rate;
+
+	DRM_DEBUG_DP("%s: rrate=%ld\n", __func__, rrate);
+
+	*parent_rate = rrate;
+	return rrate;
+}
+
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver

[Matthias Kaehlcke]

On Mon, Dec 02, 2019 at 01:48:27PM +0000, Chandan Uddaraju wrote:
> Add the needed DP PLL specific files to support
> display port interface on msm targets.
> 
> The DP driver calls the DP PLL driver registration.
> The DP driver sets the link and pixel clock sources.
> 
> Changes in v2:
> -- Update copyright markings on all relevant files.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
> diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
> new file mode 100644
> index 0000000..6ef2492
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
>
> ...
>
> +static u8 dp_mux_get_parent_10nm(struct clk_hw *hw)
> +{
> +	u32 auxclk_div = 0;
> +	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
> +	struct dp_pll_10nm *dp_res = pclksel->pll;
> +	u8 val = 0;
> +
> +	DRM_ERROR("clk_hw->init->name = %s\n", hw->init->name);

drive-by comment: DRM_ERROR doesn't seem the right level, DRM_DEBUG_DP
would probably be more adequate.

Also I found this line triggers a NULL pointer dereference on a SC7180
system, where clk_hw->init is NULL.

Re: [DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver

[Matthias Kaehlcke]

On Mon, Dec 02, 2019 at 01:48:27PM +0000, Chandan Uddaraju wrote:
> Add the needed DP PLL specific files to support
> display port interface on msm targets.
> 
> The DP driver calls the DP PLL driver registration.
> The DP driver sets the link and pixel clock sources.
> 
> Changes in v2:
> -- Update copyright markings on all relevant files.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
> diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
> new file mode 100644
> index 0000000..6ef2492
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
>
> ...
>
> +static u8 dp_mux_get_parent_10nm(struct clk_hw *hw)
> +{
> +	u32 auxclk_div = 0;
> +	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
> +	struct dp_pll_10nm *dp_res = pclksel->pll;
> +	u8 val = 0;
> +
> +	DRM_ERROR("clk_hw->init->name = %s\n", hw->init->name);

drive-by comment: DRM_ERROR doesn't seem the right level, DRM_DEBUG_DP
would probably be more adequate.

Also I found this line triggers a NULL pointer dereference on a SC7180
system, where clk_hw->init is NULL.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver

[Chandan Uddaraju]

Add the needed DP PLL specific files to support
display port interface on msm targets.

The DP driver calls the DP PLL driver registration.
The DP driver sets the link and pixel clock sources.

Changes in v2:
-- Update copyright markings on all relevant files.
-- Use DRM_DEBUG_DP for debug msgs.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                   |  13 +
 drivers/gpu/drm/msm/Makefile                  |   4 +
 drivers/gpu/drm/msm/dp/dp_display.c           |  48 +++
 drivers/gpu/drm/msm/dp/dp_display.h           |   3 +
 drivers/gpu/drm/msm/dp/dp_parser.h            |   4 +
 drivers/gpu/drm/msm/dp/dp_power.h             |   1 -
 drivers/gpu/drm/msm/dp/pll/dp_pll.c           | 135 +++++++
 drivers/gpu/drm/msm/dp/pll/dp_pll.h           |  57 +++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c      | 401 +++++++++++++++++++++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h      |  86 +++++
 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c | 494 ++++++++++++++++++++++++++
 11 files changed, 1245 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll.c
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll.h
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
 create mode 100644 drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 7946cb1..e73ad23 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -66,6 +66,19 @@ config DRM_MSM_DP
 	  display support is enabled through this config option. It can
 	  be primary or secondary display on device.
 
+config DRM_MSM_DP_PLL
+	bool "Enable DP PLL driver in MSM DRM"
+	depends on DRM_MSM_DP && COMMON_CLK
+	help
+	  Choose this option to enable DP PLL driver which provides DP
+	  source clocks under common clock framework.
+
+config DRM_MSM_DP_10NM_PLL
+	bool "Enable DP 10nm PLL driver in MSM DRM (used by SDM845)"
+	depends on DRM_MSM_DP_PLL
+	help
+	  Choose this option if DP PLL on SDM845 is used on the platform.
+
 config DRM_MSM_DSI
 	bool "Enable DSI support in MSM DRM driver"
 	depends on DRM_MSM
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 5939f41..3ba0c8b 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -140,4 +140,8 @@ msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
 msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
 endif
 
+msm-$(CONFIG_DRM_MSM_DP_PLL)+= dp/pll/dp_pll.o
+msm-$(CONFIG_DRM_MSM_DP_10NM_PLL)+= dp/pll/dp_pll_10nm.o \
+	dp/pll/dp_pll_10nm_util.o
+
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a893542..b57a8c1 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -61,6 +61,48 @@ struct dp_display_private {
 	{}
 };
 
+static int dp_get_pll(struct dp_display_private *dp_priv)
+{
+	struct platform_device *pdev = NULL;
+	struct platform_device *pll_pdev;
+	struct device_node *pll_node;
+	struct dp_parser *dp_parser = NULL;
+
+	if (!dp_priv) {
+		DRM_ERROR("Invalid Arguments\n");
+		return -EINVAL;
+	}
+
+	pdev = dp_priv->pdev;
+	dp_parser = dp_priv->parser;
+
+	if (!dp_parser) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: Parser not initialized\n", __func__);
+		return -EINVAL;
+	}
+
+	pll_node = of_parse_phandle(pdev->dev.of_node, "pll-node", 0);
+	if (!pll_node) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: cannot find pll device\n", __func__);
+		return -ENXIO;
+	}
+
+	pll_pdev = of_find_device_by_node(pll_node);
+	if (pll_pdev)
+		dp_parser->pll = platform_get_drvdata(pll_pdev);
+
+	of_node_put(pll_node);
+
+	if (!pll_pdev || !dp_parser->pll) {
+		DRM_DEV_ERROR(&pdev->dev, "%s: pll driver is not ready\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	dp_parser->pll_dev = get_device(&pll_pdev->dev);
+
+	return 0;
+}
+
 static irqreturn_t dp_display_irq(int irq, void *dev_id)
 {
 	struct dp_display_private *dp = dev_id;
@@ -114,6 +156,10 @@ static int dp_display_bind(struct device *dev, struct device *master,
 		goto end;
 	}
 
+	rc = dp_get_pll(dp);
+	if (rc)
+		goto end;
+
 	rc = dp_aux_register(dp->aux);
 	if (rc) {
 		DRM_ERROR("DRM DP AUX register failed\n");
@@ -812,6 +858,7 @@ int __init msm_dp_register(void)
 {
 	int ret;
 
+	msm_dp_pll_driver_register();
 	ret = platform_driver_register(&dp_display_driver);
 	if (ret) {
 		DRM_ERROR("driver register failed");
@@ -823,6 +870,7 @@ int __init msm_dp_register(void)
 
 void __exit msm_dp_unregister(void)
 {
+	msm_dp_pll_driver_unregister();
 	platform_driver_unregister(&dp_display_driver);
 }
 
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index c916408..f575d2c 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -26,4 +26,7 @@ int dp_display_get_modes(struct msm_dp *dp_display,
 bool dp_display_check_video_test(struct msm_dp *dp_display);
 int dp_display_get_test_bpp(struct msm_dp *dp_display);
 
+void __init msm_dp_pll_driver_register(void);
+void __exit msm_dp_pll_driver_unregister(void);
+
 #endif /* _DP_DISPLAY_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index b606b40..0e9e380 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -6,6 +6,8 @@
 #ifndef _DP_PARSER_H_
 #define _DP_PARSER_H_
 
+#include "pll/dp_pll.h"
+
 #define DP_LABEL "MDSS DP DISPLAY"
 #define AUX_CFG_LEN	10
 #define DP_MAX_PIXEL_CLK_KHZ	675000
@@ -192,6 +194,8 @@ struct dp_parser {
 	bool combo_phy_en;
 	struct dp_io io;
 	struct dp_display_data disp_data;
+	struct msm_dp_pll *pll;
+	struct device *pll_dev;
 	const struct dp_regulator_cfg *regulator_cfg;
 	u8 l_map[4];
 	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
index 40d7e73..76e2d3b 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.h
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -14,7 +14,6 @@
  * @init: initializes the regulators/core clocks/GPIOs/pinctrl
  * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
  * @clk_enable: enable/disable the DP clocks
- * @set_link_clk_parent: set the parent of DP link clock
  * @set_pixel_clk_parent: set the parent of DP pixel clock
  */
 struct dp_power {
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll.c b/drivers/gpu/drm/msm/dp/pll/dp_pll.c
new file mode 100644
index 0000000..33faea8
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include "dp_pll.h"
+
+int msm_dp_pll_util_parse_dt_clock(struct platform_device *pdev,
+					struct msm_dp_pll *pll)
+{
+	u32 i = 0, rc = 0;
+	struct dss_module_power *mp = &pll->mp;
+	const char *clock_name;
+	u32 clock_rate;
+
+	mp->num_clk = of_property_count_strings(pdev->dev.of_node,
+							"clock-names");
+	if (mp->num_clk <= 0) {
+		DRM_DEV_ERROR(&pdev->dev, "%s:clocks are not defined\n", __func__);
+		goto clk_err;
+	}
+
+	mp->clk_config = devm_kzalloc(&pdev->dev,
+			sizeof(struct dss_clk) * mp->num_clk, GFP_KERNEL);
+	if (!mp->clk_config) {
+		rc = -ENOMEM;
+		mp->num_clk = 0;
+		goto clk_err;
+	}
+
+	for (i = 0; i < mp->num_clk; i++) {
+		of_property_read_string_index(pdev->dev.of_node, "clock-names",
+							i, &clock_name);
+		strlcpy(mp->clk_config[i].clk_name, clock_name,
+				sizeof(mp->clk_config[i].clk_name));
+
+		of_property_read_u32_index(pdev->dev.of_node, "clock-rate",
+							i, &clock_rate);
+		mp->clk_config[i].rate = clock_rate;
+
+		if (!clock_rate)
+			mp->clk_config[i].type = DSS_CLK_AHB;
+		else
+			mp->clk_config[i].type = DSS_CLK_PCLK;
+	}
+
+clk_err:
+	return rc;
+}
+
+struct msm_dp_pll *msm_dp_pll_init(struct platform_device *pdev,
+			enum msm_dp_pll_type type, int id)
+{
+	struct device *dev = &pdev->dev;
+	struct msm_dp_pll *pll;
+
+	switch (type) {
+	case MSM_DP_PLL_10NM:
+		pll = msm_dp_pll_10nm_init(pdev, id);
+		break;
+	default:
+		pll = ERR_PTR(-ENXIO);
+		break;
+	}
+
+	if (IS_ERR(pll)) {
+		DRM_DEV_ERROR(dev, "%s: failed to init DP PLL\n", __func__);
+		return pll;
+	}
+
+	pll->type = type;
+
+	DRM_DEBUG_DP("DP:%d PLL registered", id);
+
+	return pll;
+}
+
+static const struct of_device_id dp_pll_dt_match[] = {
+	{ .compatible = "qcom,dp-pll-10nm" },
+};
+
+static int dp_pll_driver_probe(struct platform_device *pdev)
+{
+	struct msm_dp_pll *pll;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+
+	match = of_match_node(dp_pll_dt_match, dev->of_node);
+	if (!match)
+		return -ENODEV;
+
+	/* Currently supporting only 10nm-DP PLL */
+	pll = msm_dp_pll_init(pdev, MSM_DP_PLL_10NM, 0);
+	if (IS_ERR_OR_NULL(pll)) {
+		DRM_DEV_ERROR(dev,
+			"%s: pll init failed: %ld, need separate pll clk driver\n",
+			__func__, PTR_ERR(pll));
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pll);
+
+	return 0;
+}
+
+static int dp_pll_driver_remove(struct platform_device *pdev)
+{
+	struct msm_dp_pll *pll = platform_get_drvdata(pdev);
+
+	if (pll)
+		pll = NULL;
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver dp_pll_platform_driver = {
+	.probe      = dp_pll_driver_probe,
+	.remove     = dp_pll_driver_remove,
+	.driver     = {
+		.name   = "msm_dp_pll",
+		.of_match_table = dp_pll_dt_match,
+	},
+};
+
+void __init msm_dp_pll_driver_register(void)
+{
+	platform_driver_register(&dp_pll_platform_driver);
+}
+
+void __exit msm_dp_pll_driver_unregister(void)
+{
+	platform_driver_unregister(&dp_pll_platform_driver);
+}
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll.h b/drivers/gpu/drm/msm/dp/pll/dp_pll.h
new file mode 100644
index 0000000..07ce822
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DP_PLL_H
+#define __DP_PLL_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "dpu_io_util.h"
+#include "msm_drv.h"
+
+#define PLL_REG_W(base, offset, data)	\
+				writel((data), (base) + (offset))
+#define PLL_REG_R(base, offset)	readl((base) + (offset))
+
+enum msm_dp_pll_type {
+	MSM_DP_PLL_10NM,
+	MSM_DP_PLL_MAX
+};
+
+struct msm_dp_pll {
+	enum msm_dp_pll_type type;
+	struct clk_hw clk_hw;
+	unsigned long	rate;		/* current vco rate */
+	u64		min_rate;	/* min vco rate */
+	u64		max_rate;	/* max vco rate */
+	bool		pll_on;
+	void		*priv;
+	/* Pll specific resources like GPIO, power supply, clocks, etc*/
+	struct dss_module_power mp;
+	int (*get_provider)(struct msm_dp_pll *pll,
+			struct clk **link_clk_provider,
+			struct clk **pixel_clk_provider);
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct msm_dp_pll, clk_hw)
+
+struct msm_dp_pll *msm_dp_pll_init(struct platform_device *pdev,
+				enum msm_dp_pll_type type, int id);
+
+int msm_dp_pll_util_parse_dt_clock(struct platform_device *pdev,
+				struct msm_dp_pll *pll);
+
+#ifdef CONFIG_DRM_MSM_DP_10NM_PLL
+struct msm_dp_pll *msm_dp_pll_10nm_init(struct platform_device *pdev, int id);
+#else
+static inline struct msm_dp_pll *msm_dp_pll_10nm_init
+				(struct platform_device *pdev, int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+#endif /* __DP_PLL_H */
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
new file mode 100644
index 0000000..6ef2492
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ *              +------------------------------+
+ *              |         DP_VCO_CLK           |
+ *              |                              |
+ *              |    +-------------------+     |
+ *              |    |   (DP PLL/VCO)    |     |
+ *              |    +---------+---------+     |
+ *              |              v               |
+ *              |   +----------+-----------+   |
+ *              |   | hsclk_divsel_clk_src |   |
+ *              |   +----------+-----------+   |
+ *              +------------------------------+
+ *                              |
+ *          +---------<---------v------------>----------+
+ *          |                                           |
+ * +--------v---------+                                 |
+ * | dp_link_clk_src  |                                 |
+ * |    divsel_ten    |                                 |
+ * +--------+---------+                                 |
+ *          |                                           |
+ *          |                                           |
+ *          v                                           v
+ * Input to DISPCC block                                |
+ * for link clk, crypto clk                             |
+ * and interface clock                                  |
+ *                                                      |
+ *                                                      |
+ *      +--------<------------+-----------------+---<---+
+ *      |                     |                 |
+ * +----v---------+  +--------v-----+  +--------v------+
+ * | vco_divided  |  | vco_divided  |  | vco_divided   |
+ * |    _clk_src  |  |    _clk_src  |  |    _clk_src   |
+ * |              |  |              |  |               |
+ * |divsel_six    |  |  divsel_two  |  |  divsel_four  |
+ * +-------+------+  +-----+--------+  +--------+------+
+ *         |                 |                  |
+ *         v---->----------v-------------<------v
+ *                         |
+ *              +----------+---------+
+ *              |   vco_divided_clk  |
+ *              |       _src_mux     |
+ *              +---------+----------+
+ *                        |
+ *                        v
+ *              Input to DISPCC block
+ *              for DP pixel clock
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#include "dp_pll_10nm.h"
+
+#define NUM_PROVIDED_CLKS		2
+
+#define DP_LINK_CLK_SRC			0
+#define DP_PIXEL_CLK_SRC		1
+
+static struct dp_pll_10nm *dp_pdb;
+
+static const struct clk_ops dp_10nm_vco_clk_ops = {
+	.recalc_rate = dp_vco_recalc_rate_10nm,
+	.set_rate = dp_vco_set_rate_10nm,
+	.round_rate = dp_vco_round_rate_10nm,
+	.prepare = dp_vco_prepare_10nm,
+	.unprepare = dp_vco_unprepare_10nm,
+};
+
+struct dp_pll_10nm_pclksel {
+	struct clk_hw hw;
+
+	/* divider params */
+	u8 shift;
+	u8 width;
+	u8 flags; /* same flags as used by clk_divider struct */
+
+	struct dp_pll_10nm *pll;
+};
+#define to_pll_10nm_pclksel(_hw) container_of(_hw, struct dp_pll_10nm_pclksel, hw)
+
+static int dp_mux_set_parent_10nm(struct clk_hw *hw, u8 val)
+{
+	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
+	struct dp_pll_10nm *dp_res = pclksel->pll;
+	u32 auxclk_div;
+
+	auxclk_div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_VCO_DIV);
+	auxclk_div &= ~0x03;	/* bits 0 to 1 */
+
+	if (val == 0) /* mux parent index = 0 */
+		auxclk_div |= 1;
+	else if (val == 1) /* mux parent index = 1 */
+		auxclk_div |= 2;
+	else if (val == 2) /* mux parent index = 2 */
+		auxclk_div |= 0;
+
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_VCO_DIV, auxclk_div);
+	DRM_DEBUG_DP("%s: mux=%d auxclk_div=%x\n", __func__, val, auxclk_div);
+
+	return 0;
+}
+
+static u8 dp_mux_get_parent_10nm(struct clk_hw *hw)
+{
+	u32 auxclk_div = 0;
+	struct dp_pll_10nm_pclksel *pclksel = to_pll_10nm_pclksel(hw);
+	struct dp_pll_10nm *dp_res = pclksel->pll;
+	u8 val = 0;
+
+	DRM_ERROR("clk_hw->init->name = %s\n", hw->init->name);
+	auxclk_div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_VCO_DIV);
+	auxclk_div &= 0x03;
+
+	if (auxclk_div == 1) /* Default divider */
+		val = 0;
+	else if (auxclk_div == 2)
+		val = 1;
+	else if (auxclk_div == 0)
+		val = 2;
+
+	DRM_DEBUG_DP("%s: auxclk_div=%d, val=%d\n", __func__, auxclk_div, val);
+
+	return val;
+}
+
+static int clk_mux_determine_rate(struct clk_hw *hw,
+				     struct clk_rate_request *req)
+{
+	unsigned long rate = 0;
+	int ret = 0;
+
+	rate = clk_get_rate(hw->clk);
+
+	if (rate <= 0) {
+		DRM_ERROR("Rate is not set properly\n");
+		return -EINVAL;
+	}
+
+	req->rate = rate;
+
+	DRM_DEBUG_DP("%s: rate=%ld\n", __func__, req->rate);
+	/* Set the new parent of mux if there is a new valid parent */
+	if (hw->clk && req->best_parent_hw->clk) {
+		ret = clk_set_parent(hw->clk, req->best_parent_hw->clk);
+		if (ret) {
+			DRM_ERROR("%s: clk_set_parent failed: ret=%d\n", __func__, ret);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static unsigned long mux_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk *div_clk = NULL, *vco_clk = NULL;
+	struct msm_dp_pll *vco = NULL;
+
+	div_clk = clk_get_parent(hw->clk);
+	if (!div_clk)
+		return 0;
+
+	vco_clk = clk_get_parent(div_clk);
+	if (!vco_clk)
+		return 0;
+
+	vco = hw_clk_to_pll(__clk_get_hw(vco_clk));
+	if (!vco)
+		return 0;
+
+	if (vco->rate == DP_VCO_HSCLK_RATE_8100MHZDIV1000)
+		return (vco->rate / 6);
+	else if (vco->rate == DP_VCO_HSCLK_RATE_5400MHZDIV1000)
+		return (vco->rate / 4);
+	else
+		return (vco->rate / 2);
+}
+
+static int dp_pll_10nm_get_provider(struct msm_dp_pll *pll,
+				     struct clk **link_clk_provider,
+				     struct clk **pixel_clk_provider)
+{
+	struct dp_pll_10nm *pll_10nm = to_dp_pll_10nm(pll);
+	struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data;
+
+	if (link_clk_provider)
+		*link_clk_provider = hw_data->hws[DP_LINK_CLK_SRC]->clk;
+	if (pixel_clk_provider)
+		*pixel_clk_provider = hw_data->hws[DP_PIXEL_CLK_SRC]->clk;
+
+	return 0;
+}
+
+static const struct clk_ops dp_10nm_pclksel_clk_ops = {
+	.get_parent = dp_mux_get_parent_10nm,
+	.set_parent = dp_mux_set_parent_10nm,
+	.recalc_rate = mux_recalc_rate,
+	.determine_rate = clk_mux_determine_rate,
+};
+
+static struct clk_hw *dp_pll_10nm_pixel_clk_sel(struct dp_pll_10nm *pll_10nm)
+{
+	struct device *dev = &pll_10nm->pdev->dev;
+	struct dp_pll_10nm_pclksel *pll_pclksel;
+	struct clk_init_data pclksel_init = {
+		.parent_names = (const char *[]){
+				"dp_vco_divsel_two_clk_src",
+				"dp_vco_divsel_four_clk_src",
+				"dp_vco_divsel_six_clk_src" },
+		.num_parents = 3,
+		.name = "dp_vco_divided_clk_src_mux",
+		.flags = CLK_IGNORE_UNUSED,
+		.ops = &dp_10nm_pclksel_clk_ops,
+	};
+	int ret;
+
+	pll_pclksel = devm_kzalloc(dev, sizeof(*pll_pclksel), GFP_KERNEL);
+	if (!pll_pclksel)
+		return ERR_PTR(-ENOMEM);
+
+	pll_pclksel->pll = pll_10nm;
+	pll_pclksel->shift = 0;
+	pll_pclksel->width = 4;
+	pll_pclksel->flags = CLK_DIVIDER_ONE_BASED;
+	pll_pclksel->hw.init = &pclksel_init;
+
+	ret = clk_hw_register(dev, &pll_pclksel->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &pll_pclksel->hw;
+}
+
+static int dp_pll_10nm_register(struct dp_pll_10nm *pll_10nm)
+{
+	char clk_name[32], parent[32], vco_name[32];
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "bi_tcxo" },
+		.num_parents = 1,
+		.name = vco_name,
+		.flags = CLK_IGNORE_UNUSED,
+		.ops = &dp_10nm_vco_clk_ops,
+	};
+	struct device *dev = &pll_10nm->pdev->dev;
+	struct clk_hw **hws = pll_10nm->hws;
+	struct clk_hw_onecell_data *hw_data;
+	struct clk_hw *hw;
+	int num = 0;
+	int ret;
+
+	DRM_DEBUG_DP("DP->id = %d", pll_10nm->id);
+
+	hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+			       NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	snprintf(vco_name, 32, "dp_vco_clk");
+	pll_10nm->base.clk_hw.init = &vco_init;
+	ret = clk_hw_register(dev, &pll_10nm->base.clk_hw);
+	if (ret)
+		return ret;
+	hws[num++] = &pll_10nm->base.clk_hw;
+
+	snprintf(clk_name, 32, "dp_link_clk_divsel_ten");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  CLK_SET_RATE_PARENT, 1, 10);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+	hw_data->hws[DP_LINK_CLK_SRC] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_two_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 2);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_four_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 4);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dp_vco_divsel_six_clk_src");
+	snprintf(parent, 32, "dp_vco_clk");
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 6);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	hws[num++] = hw;
+
+	hw = dp_pll_10nm_pixel_clk_sel(pll_10nm);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+	hw_data->hws[DP_PIXEL_CLK_SRC] = hw;
+
+	pll_10nm->num_hws = num;
+
+	hw_data->num = NUM_PROVIDED_CLKS;
+	pll_10nm->hw_data = hw_data;
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				     pll_10nm->hw_data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+struct msm_dp_pll *msm_dp_pll_10nm_init(struct platform_device *pdev, int id)
+{
+	struct dp_pll_10nm *dp_10nm_pll;
+	struct msm_dp_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	dp_10nm_pll = devm_kzalloc(&pdev->dev, sizeof(*dp_10nm_pll), GFP_KERNEL);
+	if (!dp_10nm_pll)
+		return ERR_PTR(-ENOMEM);
+
+	DRM_DEBUG_DP("DP PLL%d", id);
+
+	dp_10nm_pll->pdev = pdev;
+	dp_10nm_pll->id = id;
+	dp_pdb = dp_10nm_pll;
+
+	dp_10nm_pll->pll_base = msm_ioremap(pdev, "pll_base", "DP_PLL");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->pll_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PLL base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->phy_base = msm_ioremap(pdev, "phy_base", "DP_PHY");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->phy_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->ln_tx0_base = msm_ioremap(pdev, "ln_tx0_base", "DP_LN_TX0");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->ln_tx0_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN LN_TX0 base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dp_10nm_pll->ln_tx1_base = msm_ioremap(pdev, "ln_tx1_base", "DP_LN_TX1");
+	if (IS_ERR_OR_NULL(dp_10nm_pll->ln_tx1_base)) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to map CMN LN_TX1 base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "cell-index",
+				&dp_10nm_pll->index);
+	if (ret) {
+		DRM_ERROR("Unable to get the cell-index ret=%d\n", ret);
+		dp_10nm_pll->index = 0;
+	}
+
+	ret = msm_dp_pll_util_parse_dt_clock(pdev, &dp_10nm_pll->base);
+	if (ret) {
+		DRM_ERROR("Unable to parse dt clocks ret=%d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	ret = dp_pll_10nm_register(dp_10nm_pll);
+	if (ret) {
+		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	pll = &dp_10nm_pll->base;
+	pll->min_rate = DP_VCO_HSCLK_RATE_1620MHZDIV1000;
+	pll->max_rate = DP_VCO_HSCLK_RATE_8100MHZDIV1000;
+	pll->get_provider = dp_pll_10nm_get_provider;
+
+	return pll;
+}
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
new file mode 100644
index 0000000..e2a5337
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DP_PLL_10NM_H
+#define __DP_PLL_10NM_H
+
+#include "dp_pll.h"
+#include "dp_reg.h"
+
+#define DP_VCO_HSCLK_RATE_1620MHZDIV1000	1620000UL
+#define DP_VCO_HSCLK_RATE_2700MHZDIV1000	2700000UL
+#define DP_VCO_HSCLK_RATE_5400MHZDIV1000	5400000UL
+#define DP_VCO_HSCLK_RATE_8100MHZDIV1000	8100000UL
+
+#define NUM_DP_CLOCKS_MAX			6
+
+#define DP_PHY_PLL_POLL_SLEEP_US		500
+#define DP_PHY_PLL_POLL_TIMEOUT_US		10000
+
+#define DP_VCO_RATE_8100MHZDIV1000		8100000UL
+#define DP_VCO_RATE_9720MHZDIV1000		9720000UL
+#define DP_VCO_RATE_10800MHZDIV1000		10800000UL
+
+struct dp_pll_10nm {
+	struct msm_dp_pll base;
+
+	int id;
+	struct platform_device *pdev;
+
+	void __iomem *pll_base;
+	void __iomem *phy_base;
+	void __iomem *ln_tx0_base;
+	void __iomem *ln_tx1_base;
+
+	/* private clocks: */
+	struct clk_hw *hws[NUM_DP_CLOCKS_MAX];
+	u32 num_hws;
+
+	/* clock-provider: */
+	struct clk_hw_onecell_data *hw_data;
+
+	/* lane and orientation settings */
+	u8 lane_cnt;
+	u8 orientation;
+
+	/* COM PHY settings */
+	u32 hsclk_sel;
+	u32 dec_start_mode0;
+	u32 div_frac_start1_mode0;
+	u32 div_frac_start2_mode0;
+	u32 div_frac_start3_mode0;
+	u32 integloop_gain0_mode0;
+	u32 integloop_gain1_mode0;
+	u32 vco_tune_map;
+	u32 lock_cmp1_mode0;
+	u32 lock_cmp2_mode0;
+	u32 lock_cmp3_mode0;
+	u32 lock_cmp_en;
+
+	/* PHY vco divider */
+	u32 phy_vco_div;
+	/*
+	 * Certain pll's needs to update the same vco rate after resume in
+	 * suspend/resume scenario. Cached the vco rate for such plls.
+	 */
+	unsigned long	vco_cached_rate;
+	u32		cached_cfg0;
+	u32		cached_cfg1;
+	u32		cached_outdiv;
+
+	uint32_t index;
+};
+
+#define to_dp_pll_10nm(x)	container_of(x, struct dp_pll_10nm, base)
+
+int dp_vco_set_rate_10nm(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long dp_vco_recalc_rate_10nm(struct clk_hw *hw,
+				unsigned long parent_rate);
+long dp_vco_round_rate_10nm(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate);
+int dp_vco_prepare_10nm(struct clk_hw *hw);
+void dp_vco_unprepare_10nm(struct clk_hw *hw);
+#endif /* __DP_PLL_10NM_H */
diff --git a/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c
new file mode 100644
index 0000000..b8f7def
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/pll/dp_pll_10nm_util.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"%s: " fmt, __func__
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+
+#include "dp_extcon.h"
+#include "dp_pll.h"
+#include "dp_pll_10nm.h"
+
+static int dp_vco_pll_init_db_10nm(struct msm_dp_pll *pll,
+		unsigned long rate)
+{
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 spare_value = 0;
+
+	spare_value = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_SPARE0);
+	dp_res->lane_cnt = spare_value & 0x0F;
+	dp_res->orientation = (spare_value & 0xF0) >> 4;
+
+	DRM_DEBUG_DP("%s: spare_value=0x%x, ln_cnt=0x%x, orientation=0x%x\n",
+			__func__, spare_value, dp_res->lane_cnt, dp_res->orientation);
+
+	switch (rate) {
+	case DP_VCO_HSCLK_RATE_1620MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_9720MHZDIV1000);
+		dp_res->hsclk_sel = 0x0c;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x6f;
+		dp_res->lock_cmp2_mode0 = 0x08;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x1;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_2700MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_10800MHZDIV1000);
+		dp_res->hsclk_sel = 0x04;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x0f;
+		dp_res->lock_cmp2_mode0 = 0x0e;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x1;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_5400MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_10800MHZDIV1000);
+		dp_res->hsclk_sel = 0x00;
+		dp_res->dec_start_mode0 = 0x8c;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x00;
+		dp_res->div_frac_start3_mode0 = 0x0a;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x1f;
+		dp_res->lock_cmp2_mode0 = 0x1c;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x2;
+		dp_res->lock_cmp_en = 0x00;
+		break;
+	case DP_VCO_HSCLK_RATE_8100MHZDIV1000:
+		DRM_DEBUG_DP("%s: VCO rate: %ld\n", __func__,
+				DP_VCO_RATE_8100MHZDIV1000);
+		dp_res->hsclk_sel = 0x03;
+		dp_res->dec_start_mode0 = 0x69;
+		dp_res->div_frac_start1_mode0 = 0x00;
+		dp_res->div_frac_start2_mode0 = 0x80;
+		dp_res->div_frac_start3_mode0 = 0x07;
+		dp_res->integloop_gain0_mode0 = 0x3f;
+		dp_res->integloop_gain1_mode0 = 0x00;
+		dp_res->vco_tune_map = 0x00;
+		dp_res->lock_cmp1_mode0 = 0x2f;
+		dp_res->lock_cmp2_mode0 = 0x2a;
+		dp_res->lock_cmp3_mode0 = 0x00;
+		dp_res->phy_vco_div = 0x0;
+		dp_res->lock_cmp_en = 0x08;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int dp_config_vco_rate_10nm(struct msm_dp_pll *pll,
+		unsigned long rate)
+{
+	u32 res = 0;
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	res = dp_vco_pll_init_db_10nm(pll, rate);
+	if (res) {
+		DRM_ERROR("VCO Init DB failed\n");
+		return res;
+	}
+
+	if (dp_res->lane_cnt != 4) {
+		if (dp_res->orientation == ORIENTATION_CC2)
+			PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x6d);
+		else
+			PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x75);
+	} else {
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x7d);
+	}
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SVS_MODE_CLK_SEL, 0x01);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYSCLK_EN_SEL, 0x37);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYS_CLK_CTRL, 0x02);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CLK_ENABLE1, 0x0e);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_SYSCLK_BUF_ENABLE, 0x06);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CLK_SEL, 0x30);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CMN_CONFIG, 0x02);
+
+	/* Different for each clock rates */
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_HSCLK_SEL, dp_res->hsclk_sel);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DEC_START_MODE0, dp_res->dec_start_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START1_MODE0, dp_res->div_frac_start1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START2_MODE0, dp_res->div_frac_start2_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_DIV_FRAC_START3_MODE0, dp_res->div_frac_start3_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_INTEGLOOP_GAIN0_MODE0, dp_res->integloop_gain0_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_INTEGLOOP_GAIN1_MODE0, dp_res->integloop_gain1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_VCO_TUNE_MAP, dp_res->vco_tune_map);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP1_MODE0, dp_res->lock_cmp1_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP2_MODE0, dp_res->lock_cmp2_mode0);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP3_MODE0, dp_res->lock_cmp3_mode0);
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_BG_TIMER, 0x0a);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CORECLK_DIV_MODE0, 0x0a);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_VCO_TUNE_CTRL, 0x00);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3f);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CORE_CLK_EN, 0x1f);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_IVCO, 0x07);
+	PLL_REG_W(dp_res->pll_base,
+		QSERDES_COM_LOCK_CMP_EN, dp_res->lock_cmp_en);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_CCTRL_MODE0, 0x36);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_CP_CTRL_MODE0, 0x06);
+
+	if (dp_res->orientation == ORIENTATION_CC2)
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_MODE, 0x4c);
+	else
+		PLL_REG_W(dp_res->phy_base, REG_DP_PHY_MODE, 0x5c);
+
+	/* TX Lane configuration */
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_TX0_TX1_LANE_CTL, 0x05);
+	PLL_REG_W(dp_res->phy_base,
+			REG_DP_PHY_TX2_TX3_LANE_CTL, 0x05);
+
+	/* TX-0 register configuration */
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, 0x1a);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_VMODE_CTRL1, 0x40);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN, 0x30);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_INTERFACE_SELECT, 0x3d);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_CLKBUF_ENABLE, 0x0f);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RESET_TSYNC_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx0_base,
+		REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN, 0x00);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_INTERFACE_MODE, 0x00);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_BAND, 0x4);
+
+	/* TX-1 register configuration */
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, 0x1a);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_VMODE_CTRL1, 0x40);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN, 0x30);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_INTERFACE_SELECT, 0x3d);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_CLKBUF_ENABLE, 0x0f);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RESET_TSYNC_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN, 0x03);
+	PLL_REG_W(dp_res->ln_tx1_base,
+		REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN, 0x00);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_INTERFACE_MODE, 0x00);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_BAND, 0x4);
+
+	/* dependent on the vco frequency */
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_VCO_DIV, dp_res->phy_vco_div);
+
+	return res;
+}
+
+static bool dp_10nm_pll_lock_status(struct dp_pll_10nm *dp_res)
+{
+	u32 status;
+	bool pll_locked;
+
+	/* poll for PLL lock status */
+	if (readl_poll_timeout_atomic((dp_res->pll_base +
+			QSERDES_COM_C_READY_STATUS),
+			status,
+			((status & BIT(0)) > 0),
+			DP_PHY_PLL_POLL_SLEEP_US,
+			DP_PHY_PLL_POLL_TIMEOUT_US)) {
+		DRM_ERROR("%s: C_READY status is not high. Status=%x\n",
+				__func__, status);
+		pll_locked = false;
+	} else {
+		pll_locked = true;
+	}
+
+	return pll_locked;
+}
+
+static bool dp_10nm_phy_rdy_status(struct dp_pll_10nm *dp_res)
+{
+	u32 status;
+	bool phy_ready = true;
+
+	/* poll for PHY ready status */
+	if (readl_poll_timeout_atomic((dp_res->phy_base +
+			REG_DP_PHY_STATUS),
+			status,
+			((status & (BIT(1))) > 0),
+			DP_PHY_PLL_POLL_SLEEP_US,
+			DP_PHY_PLL_POLL_TIMEOUT_US)) {
+		DRM_ERROR("%s: Phy_ready is not high. Status=%x\n",
+				__func__, status);
+		phy_ready = false;
+	}
+
+	return phy_ready;
+}
+
+static int dp_pll_enable_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 bias_en, drvr_en;
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_AUX_CFG2, 0x04);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x01);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x05);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x01);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x09);
+
+	PLL_REG_W(dp_res->pll_base, QSERDES_COM_RESETSM_CNTRL, 0x20);
+
+	if (!dp_10nm_pll_lock_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x19);
+	/* poll for PHY ready status */
+	if (!dp_10nm_phy_rdy_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	DRM_DEBUG_DP("%s: PLL is locked\n", __func__);
+
+	if (dp_res->lane_cnt == 1) {
+		bias_en = 0x3e;
+		drvr_en = 0x13;
+	} else {
+		bias_en = 0x3f;
+		drvr_en = 0x10;
+	}
+
+	if (dp_res->lane_cnt != 4) {
+		if (dp_res->orientation == ORIENTATION_CC1) {
+			PLL_REG_W(dp_res->ln_tx1_base,
+				REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+			PLL_REG_W(dp_res->ln_tx1_base,
+				REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		} else {
+			PLL_REG_W(dp_res->ln_tx0_base,
+				REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+			PLL_REG_W(dp_res->ln_tx0_base,
+				REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		}
+	} else {
+		PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+		PLL_REG_W(dp_res->ln_tx0_base,
+			REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+		PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_HIGHZ_DRVR_EN, drvr_en);
+		PLL_REG_W(dp_res->ln_tx1_base,
+			REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN, bias_en);
+	}
+
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_POL_INV, 0x0a);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_POL_INV, 0x0a);
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x18);
+	udelay(2000);
+
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_CFG, 0x19);
+
+	/* poll for PHY ready status */
+	if (!dp_10nm_phy_rdy_status(dp_res)) {
+		rc = -EINVAL;
+		goto lock_err;
+	}
+
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_DRV_LVL, 0x38);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_DRV_LVL, 0x38);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, 0x20);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, 0x20);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX, 0x06);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX, 0x06);
+	PLL_REG_W(dp_res->ln_tx0_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX, 0x07);
+	PLL_REG_W(dp_res->ln_tx1_base, REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX, 0x07);
+
+lock_err:
+	return rc;
+}
+
+static int dp_pll_disable_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	/* Assert DP PHY power down */
+	PLL_REG_W(dp_res->phy_base, REG_DP_PHY_PD_CTL, 0x2);
+
+	return rc;
+}
+
+
+int dp_vco_prepare_10nm(struct clk_hw *hw)
+{
+	int rc = 0;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	DRM_DEBUG_DP("%s: rate = %ld\n", __func__, pll->rate);
+	if ((dp_res->vco_cached_rate != 0)
+		&& (dp_res->vco_cached_rate == pll->rate)) {
+		rc = dp_vco_set_rate_10nm(hw,
+			dp_res->vco_cached_rate, dp_res->vco_cached_rate);
+		if (rc) {
+			DRM_ERROR("index=%d vco_set_rate failed. rc=%d\n",
+				rc, dp_res->index);
+			goto error;
+		}
+	}
+
+	rc = dp_pll_enable_10nm(hw);
+	if (rc) {
+		DRM_ERROR("ndx=%d failed to enable dp pll\n",
+					dp_res->index);
+		goto error;
+	}
+
+	pll->pll_on = true;
+error:
+	return rc;
+}
+
+void dp_vco_unprepare_10nm(struct clk_hw *hw)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+
+	if (!dp_res) {
+		DRM_ERROR("Invalid input parameter\n");
+		return;
+	}
+
+	if (!pll->pll_on) {
+		DRM_ERROR("pll resource can't be enabled\n");
+		return;
+	}
+	dp_res->vco_cached_rate = pll->rate;
+	dp_pll_disable_10nm(hw);
+
+	pll->pll_on = false;
+}
+
+int dp_vco_set_rate_10nm(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	int rc;
+
+	DRM_DEBUG_DP("DP lane CLK rate=%ld\n", rate);
+
+	rc = dp_config_vco_rate_10nm(pll, rate);
+	if (rc)
+		DRM_ERROR("%s: Failed to set clk rate\n", __func__);
+
+	pll->rate = rate;
+
+	return 0;
+}
+
+unsigned long dp_vco_recalc_rate_10nm(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+	struct dp_pll_10nm *dp_res = to_dp_pll_10nm(pll);
+	u32 div, hsclk_div, link_clk_div = 0;
+	u64 vco_rate;
+
+	div = PLL_REG_R(dp_res->pll_base, QSERDES_COM_HSCLK_SEL);
+	div &= 0x0f;
+
+	if (div == 12)
+		hsclk_div = 6; /* Default */
+	else if (div == 4)
+		hsclk_div = 4;
+	else if (div == 0)
+		hsclk_div = 2;
+	else if (div == 3)
+		hsclk_div = 1;
+	else {
+		DRM_DEBUG_DP("unknown divider. forcing to default\n");
+		hsclk_div = 5;
+	}
+
+	div = PLL_REG_R(dp_res->phy_base, REG_DP_PHY_AUX_CFG2);
+	div >>= 2;
+
+	if ((div & 0x3) == 0)
+		link_clk_div = 5;
+	else if ((div & 0x3) == 1)
+		link_clk_div = 10;
+	else if ((div & 0x3) == 2)
+		link_clk_div = 20;
+	else
+		DRM_ERROR("%s: unsupported div. Phy_mode: %d\n", __func__, div);
+
+	if (link_clk_div == 20) {
+		vco_rate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+	} else {
+		if (hsclk_div == 6)
+			vco_rate = DP_VCO_HSCLK_RATE_1620MHZDIV1000;
+		else if (hsclk_div == 4)
+			vco_rate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+		else if (hsclk_div == 2)
+			vco_rate = DP_VCO_HSCLK_RATE_5400MHZDIV1000;
+		else
+			vco_rate = DP_VCO_HSCLK_RATE_8100MHZDIV1000;
+	}
+
+	DRM_DEBUG_DP("returning vco rate = %lu\n", (unsigned long)vco_rate);
+
+	dp_res->vco_cached_rate = pll->rate = vco_rate;
+	return (unsigned long)vco_rate;
+}
+
+long dp_vco_round_rate_10nm(struct clk_hw *hw, unsigned long rate,
+			unsigned long *parent_rate)
+{
+	unsigned long rrate = rate;
+	struct msm_dp_pll *pll = hw_clk_to_pll(hw);
+
+	if (rate <= pll->min_rate)
+		rrate = pll->min_rate;
+	else if (rate <= DP_VCO_HSCLK_RATE_2700MHZDIV1000)
+		rrate = DP_VCO_HSCLK_RATE_2700MHZDIV1000;
+	else if (rate <= DP_VCO_HSCLK_RATE_5400MHZDIV1000)
+		rrate = DP_VCO_HSCLK_RATE_5400MHZDIV1000;
+	else
+		rrate = pll->max_rate;
+
+	DRM_DEBUG_DP("%s: rrate=%ld\n", __func__, rrate);
+
+	*parent_rate = rrate;
+	return rrate;
+}
+
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Chandan Uddaraju]

Add bindings for Snapdragon 845 DisplayPort and
display-port PLL driver.

Changes in V2:
Provide details about sel-gpio

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
 .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
 2 files changed, 261 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt

diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
new file mode 100644
index 0000000..38be36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp.txt
@@ -0,0 +1,249 @@
+Qualcomm Technologies, Inc.
+DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
+DP Controller: Required properties:
+- compatible:           Should be "qcom,dp-display".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the controller instance.
+- reg-names:            A list of strings that name the list of regs.
+			"dp_ahb" - DP controller memory region.
+			"dp_aux" - DP AUX memory region.
+			"dp_link" - DP link layer memory region.
+			"dp_p0" - DP pixel clock domain memory region.
+			"dp_phy" - DP PHY memory region.
+			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
+			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
+			"dp_mmss_cc" - Display Clock Control memory region.
+			"qfprom_physical" - QFPROM Phys memory region.
+			"dp_pll" - USB3 DP combo PLL memory region.
+			"usb3_dp_com" - USB3 DP PHY combo memory region.
+			"hdcp_physical" - DP HDCP memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
+			"ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".
+- pll-node:		phandle to DP PLL node.
+- vdda-1p2-supply:		phandle to vdda 1.2V regulator node.
+- vdda-0p9-supply:		phandle to vdda 0.9V regulator node.
+- qcom,aux-cfg0-settings:		Specifies the DP AUX configuration 0 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg1-settings:		Specifies the DP AUX configuration 1 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg2-settings:		Specifies the DP AUX configuration 2 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg3-settings:		Specifies the DP AUX configuration 3 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg4-settings:		Specifies the DP AUX configuration 4 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg5-settings:		Specifies the DP AUX configuration 5 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg6-settings:		Specifies the DP AUX configuration 6 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg7-settings:		Specifies the DP AUX configuration 7 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg8-settings:		Specifies the DP AUX configuration 8 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg9-settings:		Specifies the DP AUX configuration 9 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,max-pclk-frequency-khz:	An integer specifying the maximum. pixel clock in KHz supported by Display Port.
+- extcon:				Phandle for the external connector class interface.
+- qcom,<type>-supply-entries:		A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
+					can be "core", "ctrl", and "phy". Within the same type,
+					there can be more than one instance of this binding,
+					in which case the entry would be appended with the
+					supply entry index.
+					e.g. qcom,ctrl-supply-entry@0
+					-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
+					-- qcom,supply-min-voltage: minimum voltage level (uV)
+					-- qcom,supply-max-voltage: maximum voltage level (uV)
+					-- qcom,supply-enable-load: load drawn (uA) from enabled supply
+					-- qcom,supply-disable-load: load drawn (uA) from disabled supply
+					-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
+					-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
+					-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
+					-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
+- pinctrl-names:	List of names to assign mdss pin states defined in pinctrl device node
+					Refer to pinctrl-bindings.txt
+- pinctrl-<0..n>:	Lists phandles each pointing to the pin configuration node within a pin
+					controller. These pin configurations are installed in the pinctrl
+					device node. Refer to pinctrl-bindings.txt
+DP Endpoint properties:
+  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
+    input endpoint. For port@1, set to the DPU interface output. See [2] for
+    device graph info.
+
+Optional properties:
+- qcom,aux-en-gpio:		Specifies the aux-channel enable gpio.
+- qcom,aux-sel-gpio:		Specifies the mux-selection that might be needed for aux interface.
+
+
+DP PLL: Required properties:
+- compatible:           Should be "qcom,dp-pll-10nm".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the PLL instance.
+- reg-names:            A list of strings that name the list of regs.
+			"pll_base" - DP PLL memory region.
+			"phy_base" - DP PHY memory region.
+			"ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
+			"ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
+			"gdsc_base" - gdsc memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
+- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value			     is set to zero so that minimum clock value is configured. Non-zero clock
+			value can be used to configure DP pixel clock.
+
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/graph.txt
+
+Example:
+	msm_dp: dp_display@ae90000{
+		cell-index = <0>;
+		compatible = "qcom,dp-display";
+
+		reg =   <0 0x90000 0x0dc>,
+			<0 0x90200 0x0c0>,
+			<0 0x90400 0x508>,
+			<0 0x90a00 0x094>,
+			<1 0xeaa00 0x200>,
+			<1 0xea200 0x200>,
+			<1 0xea600 0x200>,
+			<2 0x02000 0x1a0>,
+			<3 0x00000 0x621c>,
+			<1 0xea000 0x180>,
+			<1 0xe8000 0x20>,
+			<4 0xe1000 0x034>;
+		reg-names = "dp_ahb", "dp_aux", "dp_link",
+			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
+			"dp_mmss_cc", "qfprom_physical", "dp_pll",
+			"usb3_dp_com", "hdcp_physical";
+
+		interrupt-parent = <&mdss>;
+		interrupts = <12 0>;
+
+		extcon = <&usb_1_ssphy>;
+		clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+			<&rpmhcc RPMH_CXO_CLK>,
+			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+		clock-names = "core_aux_clk", "core_ref_clk_src",
+			"core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk",
+			"ctrl_link_iface_clk", "ctrl_pixel_clk",
+			"crypto_clk", "pixel_clk_rcg";
+
+		pll-node = <&dp_pll>;
+		qcom,aux-cfg0-settings = [20 00];
+		qcom,aux-cfg1-settings = [24 13 23 1d];
+		qcom,aux-cfg2-settings = [28 24];
+		qcom,aux-cfg3-settings = [2c 00];
+		qcom,aux-cfg4-settings = [30 0a];
+		qcom,aux-cfg5-settings = [34 26];
+		qcom,aux-cfg6-settings = [38 0a];
+		qcom,aux-cfg7-settings = [3c 03];
+		qcom,aux-cfg8-settings = [40 bb];
+		qcom,aux-cfg9-settings = [44 03];
+
+		qcom,max-pclk-frequency-khz = <675000>;
+
+		qcom,ctrl-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,ctrl-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-1p2";
+				qcom,supply-min-voltage = <1200000>;
+				qcom,supply-max-voltage = <1200000>;
+				qcom,supply-enable-load = <21800>;
+				qcom,supply-disable-load = <4>;
+			};
+		};
+
+		qcom,phy-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,phy-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-0p9";
+				qcom,supply-min-voltage = <880000>;
+				qcom,supply-max-voltage = <880000>;
+				qcom,supply-enable-load = <36000>;
+				qcom,supply-disable-load = <32>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dp_in: endpoint {
+					remote-endpoint = <&dpu_intf0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dp_out: endpoint {
+				};
+			};
+		};
+	};
+
+	dp_pll: dp-pll@c011000 {
+		compatible = "qcom,dp-pll-10nm";
+		label = "DP PLL";
+		cell-index = <0>;
+		#clock-cells = <1>;
+
+		reg = <1 0xea000 0x200>,
+		      <1 0xeaa00 0x200>,
+		      <1 0xea200 0x200>,
+		      <1 0xea600 0x200>,
+		      <2 0x03000 0x8>;
+		reg-names = "pll_base", "phy_base", "ln_tx0_base",
+			"ln_tx1_base", "gdsc_base";
+
+		clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+			 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+		clock-names = "iface_clk", "ref_clk",
+			"cfg_ahb_clk", "pipe_clk";
+		clock-rate = <0>;
+
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index a61dd40..eac6e1c 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -63,8 +63,9 @@ Required properties:
 	Documentation/devicetree/bindings/graph.txt
 	Documentation/devicetree/bindings/media/video-interfaces.txt
 
-	Port 0 -> DPU_INTF1 (DSI1)
-	Port 1 -> DPU_INTF2 (DSI2)
+	Port 0 -> DPU_INTF0 (DP)
+	Port 1 -> DPU_INTF1 (DSI1)
+	Port 2 -> DPU_INTF2 (DSI2)
 
 Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -125,13 +126,20 @@ Example:
 
 				port@0 {
 					reg = <0>;
-					dpu_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
+					dpu_intf0_out: endpoint {
+						remote-endpoint = <&dp_in>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
+					dpu_intf1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
 					dpu_intf2_out: endpoint {
 						remote-endpoint = <&dsi1_in>;
 					};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845

[Chandan Uddaraju]

Add bindings for Snapdragon 845 DisplayPort and
display-port PLL driver.

Changes in V2:
Provide details about sel-gpio

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 .../devicetree/bindings/display/msm/dp.txt         | 249 +++++++++++++++++++++
 .../devicetree/bindings/display/msm/dpu.txt        |  16 +-
 2 files changed, 261 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dp.txt

diff --git a/Documentation/devicetree/bindings/display/msm/dp.txt b/Documentation/devicetree/bindings/display/msm/dp.txt
new file mode 100644
index 0000000..38be36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp.txt
@@ -0,0 +1,249 @@
+Qualcomm Technologies, Inc.
+DP is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
+DP Controller: Required properties:
+- compatible:           Should be "qcom,dp-display".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the controller instance.
+- reg-names:            A list of strings that name the list of regs.
+			"dp_ahb" - DP controller memory region.
+			"dp_aux" - DP AUX memory region.
+			"dp_link" - DP link layer memory region.
+			"dp_p0" - DP pixel clock domain memory region.
+			"dp_phy" - DP PHY memory region.
+			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
+			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
+			"dp_mmss_cc" - Display Clock Control memory region.
+			"qfprom_physical" - QFPROM Phys memory region.
+			"dp_pll" - USB3 DP combo PLL memory region.
+			"usb3_dp_com" - USB3 DP PHY combo memory region.
+			"hdcp_physical" - DP HDCP memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk",
+			"ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent".
+- pll-node:		phandle to DP PLL node.
+- vdda-1p2-supply:		phandle to vdda 1.2V regulator node.
+- vdda-0p9-supply:		phandle to vdda 0.9V regulator node.
+- qcom,aux-cfg0-settings:		Specifies the DP AUX configuration 0 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg1-settings:		Specifies the DP AUX configuration 1 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg2-settings:		Specifies the DP AUX configuration 2 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg3-settings:		Specifies the DP AUX configuration 3 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg4-settings:		Specifies the DP AUX configuration 4 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg5-settings:		Specifies the DP AUX configuration 5 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg6-settings:		Specifies the DP AUX configuration 6 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg7-settings:		Specifies the DP AUX configuration 7 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg8-settings:		Specifies the DP AUX configuration 8 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,aux-cfg9-settings:		Specifies the DP AUX configuration 9 settings. The first
+					entry in this array corresponds to the register offset
+					within DP AUX, while the remaining entries indicate the
+					programmable values.
+- qcom,max-pclk-frequency-khz:	An integer specifying the maximum. pixel clock in KHz supported by Display Port.
+- extcon:				Phandle for the external connector class interface.
+- qcom,<type>-supply-entries:		A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
+					can be "core", "ctrl", and "phy". Within the same type,
+					there can be more than one instance of this binding,
+					in which case the entry would be appended with the
+					supply entry index.
+					e.g. qcom,ctrl-supply-entry@0
+					-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
+					-- qcom,supply-min-voltage: minimum voltage level (uV)
+					-- qcom,supply-max-voltage: maximum voltage level (uV)
+					-- qcom,supply-enable-load: load drawn (uA) from enabled supply
+					-- qcom,supply-disable-load: load drawn (uA) from disabled supply
+					-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
+					-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
+					-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
+					-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
+- pinctrl-names:	List of names to assign mdss pin states defined in pinctrl device node
+					Refer to pinctrl-bindings.txt
+- pinctrl-<0..n>:	Lists phandles each pointing to the pin configuration node within a pin
+					controller. These pin configurations are installed in the pinctrl
+					device node. Refer to pinctrl-bindings.txt
+DP Endpoint properties:
+  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
+    input endpoint. For port@1, set to the DPU interface output. See [2] for
+    device graph info.
+
+Optional properties:
+- qcom,aux-en-gpio:		Specifies the aux-channel enable gpio.
+- qcom,aux-sel-gpio:		Specifies the mux-selection that might be needed for aux interface.
+
+
+DP PLL: Required properties:
+- compatible:           Should be "qcom,dp-pll-10nm".
+- reg:                  Base address and length of DP hardware's memory mapped regions.
+- cell-index:           Specifies the PLL instance.
+- reg-names:            A list of strings that name the list of regs.
+			"pll_base" - DP PLL memory region.
+			"phy_base" - DP PHY memory region.
+			"ln_tx0_base" - USB3 DP PHY combo TX-0 lane memory region.
+			"ln_tx1_base" - USB3 DP PHY combo TX-1 lane memory region.
+			"gdsc_base" - gdsc memory region.
+- interrupt-parent	phandle to the interrupt parent device node.
+- interrupts:		The interrupt signal from the DP block.
+- clocks:               Clocks required for Display Port operation. See [1] for details on clock bindings.
+- clock-names:          Names of the clocks corresponding to handles. Following clocks are required:
+			"iface_clk", "ref_clk", cfg_ahb_clk", "pipe_clk".
+- clock-rate:           Initial clock rate to be configured. For the shared clocks, the default value			     is set to zero so that minimum clock value is configured. Non-zero clock
+			value can be used to configure DP pixel clock.
+
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/graph.txt
+
+Example:
+	msm_dp: dp_display@ae90000{
+		cell-index = <0>;
+		compatible = "qcom,dp-display";
+
+		reg =   <0 0x90000 0x0dc>,
+			<0 0x90200 0x0c0>,
+			<0 0x90400 0x508>,
+			<0 0x90a00 0x094>,
+			<1 0xeaa00 0x200>,
+			<1 0xea200 0x200>,
+			<1 0xea600 0x200>,
+			<2 0x02000 0x1a0>,
+			<3 0x00000 0x621c>,
+			<1 0xea000 0x180>,
+			<1 0xe8000 0x20>,
+			<4 0xe1000 0x034>;
+		reg-names = "dp_ahb", "dp_aux", "dp_link",
+			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
+			"dp_mmss_cc", "qfprom_physical", "dp_pll",
+			"usb3_dp_com", "hdcp_physical";
+
+		interrupt-parent = <&mdss>;
+		interrupts = <12 0>;
+
+		extcon = <&usb_1_ssphy>;
+		clocks =  <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+			<&rpmhcc RPMH_CXO_CLK>,
+			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>,
+			<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+		clock-names = "core_aux_clk", "core_ref_clk_src",
+			"core_usb_ref_clk", "core_usb_cfg_ahb_clk",
+			"core_usb_pipe_clk", "ctrl_link_clk",
+			"ctrl_link_iface_clk", "ctrl_pixel_clk",
+			"crypto_clk", "pixel_clk_rcg";
+
+		pll-node = <&dp_pll>;
+		qcom,aux-cfg0-settings = [20 00];
+		qcom,aux-cfg1-settings = [24 13 23 1d];
+		qcom,aux-cfg2-settings = [28 24];
+		qcom,aux-cfg3-settings = [2c 00];
+		qcom,aux-cfg4-settings = [30 0a];
+		qcom,aux-cfg5-settings = [34 26];
+		qcom,aux-cfg6-settings = [38 0a];
+		qcom,aux-cfg7-settings = [3c 03];
+		qcom,aux-cfg8-settings = [40 bb];
+		qcom,aux-cfg9-settings = [44 03];
+
+		qcom,max-pclk-frequency-khz = <675000>;
+
+		qcom,ctrl-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,ctrl-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-1p2";
+				qcom,supply-min-voltage = <1200000>;
+				qcom,supply-max-voltage = <1200000>;
+				qcom,supply-enable-load = <21800>;
+				qcom,supply-disable-load = <4>;
+			};
+		};
+
+		qcom,phy-supply-entries {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qcom,phy-supply-entry@0 {
+				reg = <0>;
+				qcom,supply-name = "vdda-0p9";
+				qcom,supply-min-voltage = <880000>;
+				qcom,supply-max-voltage = <880000>;
+				qcom,supply-enable-load = <36000>;
+				qcom,supply-disable-load = <32>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dp_in: endpoint {
+					remote-endpoint = <&dpu_intf0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dp_out: endpoint {
+				};
+			};
+		};
+	};
+
+	dp_pll: dp-pll@c011000 {
+		compatible = "qcom,dp-pll-10nm";
+		label = "DP PLL";
+		cell-index = <0>;
+		#clock-cells = <1>;
+
+		reg = <1 0xea000 0x200>,
+		      <1 0xeaa00 0x200>,
+		      <1 0xea200 0x200>,
+		      <1 0xea600 0x200>,
+		      <2 0x03000 0x8>;
+		reg-names = "pll_base", "phy_base", "ln_tx0_base",
+			"ln_tx1_base", "gdsc_base";
+
+		clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+			 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+		clock-names = "iface_clk", "ref_clk",
+			"cfg_ahb_clk", "pipe_clk";
+		clock-rate = <0>;
+
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index a61dd40..eac6e1c 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -63,8 +63,9 @@ Required properties:
 	Documentation/devicetree/bindings/graph.txt
 	Documentation/devicetree/bindings/media/video-interfaces.txt
 
-	Port 0 -> DPU_INTF1 (DSI1)
-	Port 1 -> DPU_INTF2 (DSI2)
+	Port 0 -> DPU_INTF0 (DP)
+	Port 1 -> DPU_INTF1 (DSI1)
+	Port 2 -> DPU_INTF2 (DSI2)
 
 Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -125,13 +126,20 @@ Example:
 
 				port@0 {
 					reg = <0>;
-					dpu_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
+					dpu_intf0_out: endpoint {
+						remote-endpoint = <&dp_in>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
+					dpu_intf1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
 					dpu_intf2_out: endpoint {
 						remote-endpoint = <&dsi1_in>;
 					};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[DPU PATCH v3 5/5] drm/msm/dpu: add display port support in DPU

[Chandan Uddaraju]

From: Jeykumar Sankaran <jsanka@codeaurora.org>

Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

changes in V3:
-- Moved this change as part of the DP driver changes.
-- Addressed compilation issues on the latest code base.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 65 ++++++++++++++++++++++++-----
 2 files changed, 58 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 29ac7d3..f82d990 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2037,7 +2037,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;
 	struct dpu_enc_phys_init_params phys_params;
 
 	if (!dpu_enc) {
@@ -2059,9 +2059,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}
 
 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 6c92f0f..d5c290c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -421,6 +421,33 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
 	return rc;
 }
 
+static int _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc = 0;
+
+	if (!priv->dp)
+		return rc;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return PTR_ERR(encoder);;
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return rc;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;
+	return rc;
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -433,12 +460,21 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
 				    struct msm_drm_private *priv,
 				    struct dpu_kms *dpu_kms)
 {
-	/**
-	 * Extend this function to initialize other
-	 * types of displays
-	 */
+	int rc = 0;
+
+	rc = _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_dsi failed, rc = %d\n", rc);
+		return rc;
+	}
 
-	return _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	rc = _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_DP failed, rc = %d\n", rc);
+		return rc;
+	}
+
+	return rc;
 }
 
 static void _dpu_kms_drm_obj_destroy(struct dpu_kms *dpu_kms)
@@ -626,13 +662,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[DPU PATCH v3 5/5] drm/msm/dpu: add display port support in DPU

[Chandan Uddaraju]

From: Jeykumar Sankaran <jsanka@codeaurora.org>

Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

changes in V3:
-- Moved this change as part of the DP driver changes.
-- Addressed compilation issues on the latest code base.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 65 ++++++++++++++++++++++++-----
 2 files changed, 58 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 29ac7d3..f82d990 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2037,7 +2037,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;
 	struct dpu_enc_phys_init_params phys_params;
 
 	if (!dpu_enc) {
@@ -2059,9 +2059,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}
 
 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 6c92f0f..d5c290c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -421,6 +421,33 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
 	return rc;
 }
 
+static int _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc = 0;
+
+	if (!priv->dp)
+		return rc;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return PTR_ERR(encoder);;
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return rc;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;
+	return rc;
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -433,12 +460,21 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
 				    struct msm_drm_private *priv,
 				    struct dpu_kms *dpu_kms)
 {
-	/**
-	 * Extend this function to initialize other
-	 * types of displays
-	 */
+	int rc = 0;
+
+	rc = _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_dsi failed, rc = %d\n", rc);
+		return rc;
+	}
 
-	return _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
+	rc = _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("initialize_DP failed, rc = %d\n", rc);
+		return rc;
+	}
+
+	return rc;
 }
 
 static void _dpu_kms_drm_obj_destroy(struct dpu_kms *dpu_kms)
@@ -626,13 +662,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Chandan Uddaraju]

Add the needed displayPort files to enable DP driver
on msm target.

"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.

changes in v2:
-- Update copyright markings on all relevant files.
-- Change pr_err() to DRM_ERROR()
-- Use APIs directly instead of function pointers.
-- Use drm_display_mode structure to store link parameters in the driver.
-- Use macros for register definitions instead of hardcoded values.
-- Replace writel_relaxed/readl_relaxed with writel/readl
   and remove memory barriers.
-- Remove unnecessary NULL checks.
-- Use drm helper functions for dpcd read/write.
-- Use DRM_DEBUG_DP for debug msgs.

changes in V3:
-- Removed changes in dpu_io_util.[ch]
-- Added locking around "is_connected" flag and removed atomic_set()
-- Removed the argument validation checks in all the static functions
   except initialization functions and few API calls across msm/dp files
-- Removed hardcoded values for register reads/writes
-- Removed vreg related generic structures.
-- Added return values where ever necessary.
-- Updated dp_ctrl_on function.
-- Calling the ctrl specific catalog functions directly instead of
   function pointers.
-- Added seperate change that adds standard value in drm_dp_helper file.
-- Added separate change in this list that is used to initialize
   displayport in DPU driver.
-- Added change to use drm_dp_get_adjust_request_voltage() function.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                 |    9 +
 drivers/gpu/drm/msm/Makefile                |   13 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
 drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
 drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
 drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
 drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
 drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
 drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
 drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
 drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
 drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
 drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
 drivers/gpu/drm/msm/dp/dp_link.c            | 1185 ++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
 drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
 drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
 drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
 drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
 drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
 drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
 drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
 drivers/gpu/drm/msm/msm_drv.c               |    2 +
 drivers/gpu/drm/msm/msm_drv.h               |   42 +
 26 files changed, 8366 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 6deaa7d..7946cb1 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
 	help
 	  Choose this option to enable HDCP state machine
 
+config DRM_MSM_DP
+	bool "Enable DP support in MSM DRM driver"
+	depends on DRM_MSM
+	default n
+	help
+	  Compile in support for DP driver in msm drm driver. DP external
+	  display support is enabled through this config option. It can
+	  be primary or secondary display on device.
+
 config DRM_MSM_DSI
 	bool "Enable DSI support in MSM DRM driver"
 	depends on DRM_MSM
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 1579cf0..5939f41 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -2,6 +2,7 @@
 ccflags-y := -I $(srctree)/$(src)
 ccflags-y += -I $(srctree)/$(src)/disp/dpu1
 ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
+ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -96,8 +97,20 @@ msm-y := \
 
 msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
 
+
 msm-$(CONFIG_DRM_MSM_GPU_STATE)	+= adreno/a6xx_gpu_state.o
 
+msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
+	dp/dp_catalog.o \
+	dp/dp_ctrl.o \
+	dp/dp_display.o \
+	dp/dp_drm.o \
+	dp/dp_extcon.o \
+	dp/dp_link.o \
+	dp/dp_panel.o \
+	dp/dp_parser.o \
+	dp/dp_power.o
+
 msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f96e142..29ac7d3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 
 	trace_dpu_enc_mode_set(DRMID(drm_enc));
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
+		msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
+
 	list_for_each_entry(conn_iter, connector_list, head)
 		if (conn_iter->encoder == drm_enc)
 			conn = conn_iter;
@@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
 	int ret = 0;
+	struct msm_drm_private *priv;
 	struct drm_display_mode *cur_mode = NULL;
 
 	if (!drm_enc) {
@@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	mutex_lock(&dpu_enc->enc_lock);
 	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
+	priv = drm_enc->dev->dev_private;
 
 	trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
 			     cur_mode->vdisplay);
@@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	_dpu_encoder_virt_enable_helper(drm_enc);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		ret = msm_dp_display_enable(priv->dp,
+						drm_enc);
+		if (ret) {
+			DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
+				ret);
+			goto out;
+		}
+	}
 	dpu_enc->enabled = true;
 
 out:
@@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
 	priv = drm_enc->dev->dev_private;
 	dpu_kms = to_dpu_kms(priv->kms);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		if (msm_dp_display_disable(priv->dp, drm_enc)) {
+			DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
+			return;
+		  }
+	}
 	trace_dpu_enc_disable(DRMID(drm_enc));
 
 	/* wait for idle */
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
new file mode 100644
index 0000000..a6bb52a
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+
+#include "dp_reg.h"
+#include "dp_aux.h"
+
+#define DP_AUX_ENUM_STR(x)		#x
+
+struct dp_aux_private {
+	struct device *dev;
+	struct dp_aux dp_aux;
+	struct dp_catalog *catalog;
+
+	struct mutex mutex;
+	struct completion comp;
+
+	u32 aux_error_num;
+	u32 retry_cnt;
+	bool cmd_busy;
+	bool native;
+	bool read;
+	bool no_send_addr;
+	bool no_send_stop;
+	u32 offset;
+	u32 segment;
+	u32 isr;
+
+	struct drm_dp_aux drm_aux;
+};
+
+static char *dp_aux_get_error(u32 aux_error)
+{
+	switch (aux_error) {
+	case DP_AUX_ERR_NONE:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
+	case DP_AUX_ERR_ADDR:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
+	case DP_AUX_ERR_TOUT:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
+	case DP_AUX_ERR_NACK:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
+	case DP_AUX_ERR_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
+	case DP_AUX_ERR_NACK_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
+	default:
+		return "unknown";
+	}
+}
+
+static u32 dp_aux_write(struct dp_aux_private *aux,
+			struct drm_dp_aux_msg *msg)
+{
+	u32 data[4], reg, len;
+	u8 *msgdata = msg->buffer;
+	int const aux_cmd_fifo_len = 128;
+	int i = 0;
+
+	if (aux->read)
+		len = 4;
+	else
+		len = msg->size + 4;
+
+	/*
+	 * cmd fifo only has depth of 144 bytes
+	 * limit buf length to 128 bytes here
+	 */
+	if (len > aux_cmd_fifo_len) {
+		DRM_ERROR("buf len error\n");
+		return 0;
+	}
+
+	/* Pack cmd and write to HW */
+	data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
+	if (aux->read)
+		data[0] |=  BIT(4); /* R/W */
+
+	data[1] = (msg->address >> 8) & 0xff;	/* addr[15:8] */
+	data[2] = msg->address & 0xff;		/* addr[7:0] */
+	data[3] = (msg->size - 1) & 0xff;	/* len[7:0] */
+
+	for (i = 0; i < len; i++) {
+		reg = (i < 4) ? data[i] : msgdata[i - 4];
+		/* index = 0, write */
+		reg = (((reg) << DP_AUX_DATA_OFFSET)
+		       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
+		if (i == 0)
+			reg |= DP_AUX_DATA_INDEX_WRITE;
+		aux->catalog->aux_data = reg;
+		dp_catalog_aux_write_data(aux->catalog);
+	}
+
+	dp_catalog_aux_clear_trans(aux->catalog, false);
+
+	reg = 0; /* Transaction number == 1 */
+	if (!aux->native) { /* i2c */
+		reg |= DP_AUX_TRANS_CTRL_I2C;
+
+		if (aux->no_send_addr)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
+
+		if (aux->no_send_stop)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
+	}
+
+	reg |= DP_AUX_TRANS_CTRL_GO;
+	aux->catalog->aux_data = reg;
+	dp_catalog_aux_write_trans(aux->catalog);
+
+	return len;
+}
+
+static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
+			      struct drm_dp_aux_msg *msg)
+{
+	u32 ret = 0, len = 0, timeout;
+	int const aux_timeout_ms = HZ/4;
+
+	reinit_completion(&aux->comp);
+
+	len = dp_aux_write(aux, msg);
+	if (len == 0) {
+		DRM_ERROR("DP AUX write failed\n");
+		return -EINVAL;
+	}
+
+	timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
+	if (!timeout) {
+		DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
+		return -ETIMEDOUT;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		ret = len;
+	} else {
+		DRM_ERROR_RATELIMITED("aux err: %s\n",
+			dp_aux_get_error(aux->aux_error_num));
+
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
+		struct drm_dp_aux_msg *msg)
+{
+	u32 data;
+	u8 *dp;
+	u32 i, actual_i;
+	u32 len = msg->size;
+
+	dp_catalog_aux_clear_trans(aux->catalog, true);
+
+	data = 0;
+	data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
+	data |= DP_AUX_DATA_READ;  /* read */
+
+	aux->catalog->aux_data = data;
+	dp_catalog_aux_write_data(aux->catalog);
+
+	dp = msg->buffer;
+
+	/* discard first byte */
+	data = dp_catalog_aux_read_data(aux->catalog);
+
+	for (i = 0; i < len; i++) {
+		data = dp_catalog_aux_read_data(aux->catalog);
+		*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
+
+		actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
+		if (i != actual_i)
+			pr_warn("Index mismatch: expected %d, found %d\n",
+				i, actual_i);
+	}
+}
+
+static void dp_aux_native_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE)
+		aux->aux_error_num = DP_AUX_ERR_NONE;
+	else if (isr & DP_INTR_WRONG_ADDR)
+		aux->aux_error_num = DP_AUX_ERR_ADDR;
+	else if (isr & DP_INTR_TIMEOUT)
+		aux->aux_error_num = DP_AUX_ERR_TOUT;
+	if (isr & DP_INTR_NACK_DEFER)
+		aux->aux_error_num = DP_AUX_ERR_NACK;
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_i2c_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE) {
+		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		else
+			aux->aux_error_num = DP_AUX_ERR_NONE;
+	} else {
+		if (isr & DP_INTR_WRONG_ADDR)
+			aux->aux_error_num = DP_AUX_ERR_ADDR;
+		else if (isr & DP_INTR_TIMEOUT)
+			aux->aux_error_num = DP_AUX_ERR_TOUT;
+		if (isr & DP_INTR_NACK_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
+		if (isr & DP_INTR_I2C_NACK)
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		if (isr & DP_INTR_I2C_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_DEFER;
+	}
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
+					     struct drm_dp_aux_msg *input_msg)
+{
+	u32 const edid_address = 0x50;
+	u32 const segment_address = 0x30;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	u8 *data = NULL;
+
+	if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
+		(input_msg->address != segment_address)))
+		return;
+
+
+	data = input_msg->buffer;
+	if (input_msg->address == segment_address)
+		aux->segment = *data;
+	else
+		aux->offset = *data;
+}
+
+/**
+ * dp_aux_transfer_helper() - helper function for EDID read transactions
+ *
+ * @aux: DP AUX private structure
+ * @input_msg: input message from DRM upstream APIs
+ *
+ * return: void
+ *
+ * This helper function is used to fix EDID reads for non-compliant
+ * sinks that do not handle the i2c middle-of-transaction flag correctly.
+ */
+static void dp_aux_transfer_helper(struct dp_aux_private *aux,
+				   struct drm_dp_aux_msg *input_msg)
+{
+	struct drm_dp_aux_msg helper_msg;
+	u32 const message_size = 0x10;
+	u32 const segment_address = 0x30;
+	bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+
+	if (!i2c_mot || !i2c_read || (input_msg->size == 0))
+		return;
+
+	aux->read = false;
+	aux->cmd_busy = true;
+	aux->no_send_addr = true;
+	aux->no_send_stop = true;
+
+	/*
+	 * Send the segment address for every i2c read in which the
+	 * middle-of-tranaction flag is set. This is required to support EDID
+	 * reads of more than 2 blocks as the segment address is reset to 0
+	 * since we are overriding the middle-of-transaction flag for read
+	 * transactions.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = segment_address;
+	helper_msg.buffer = &aux->segment;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+
+	/*
+	 * Send the offset address for every i2c read in which the
+	 * middle-of-transaction flag is set. This will ensure that the sink
+	 * will update its read pointer and return the correct portion of the
+	 * EDID buffer in the subsequent i2c read trasntion triggered in the
+	 * native AUX transfer function.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = input_msg->address;
+	helper_msg.buffer = &aux->offset;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+	aux->offset += message_size;
+
+	if (aux->offset == 0x80 || aux->offset == 0x100)
+		aux->segment = 0x0; /* reset segment at end of block */
+}
+
+/*
+ * This function does the real job to process an AUX transaction.
+ * It will call aux_reset() function to reset the AUX channel,
+ * if the waiting is timeout.
+ */
+static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	ssize_t ret;
+	int const aux_cmd_native_max = 16;
+	int const aux_cmd_i2c_max = 128;
+	int const retry_count = 5;
+	struct dp_aux_private *aux = container_of(drm_aux,
+		struct dp_aux_private, drm_aux);
+
+	mutex_lock(&aux->mutex);
+
+	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+
+	/* Ignore address only message */
+	if ((msg->size == 0) || (msg->buffer == NULL)) {
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+		ret = msg->size;
+		goto unlock_exit;
+	}
+
+	/* msg sanity check */
+	if ((aux->native && (msg->size > aux_cmd_native_max)) ||
+		(msg->size > aux_cmd_i2c_max)) {
+		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
+			__func__, msg->size, msg->request);
+		ret = -EINVAL;
+		goto unlock_exit;
+	}
+
+	dp_aux_update_offset_and_segment(aux, msg);
+	dp_aux_transfer_helper(aux, msg);
+
+	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	aux->cmd_busy = true;
+
+	if (aux->read) {
+		aux->no_send_addr = true;
+		aux->no_send_stop = false;
+	} else {
+		aux->no_send_addr = true;
+		aux->no_send_stop = true;
+	}
+
+	ret = dp_aux_cmd_fifo_tx(aux, msg);
+	if ((ret < 0) && aux->native) {
+		aux->retry_cnt++;
+		if (!(aux->retry_cnt % retry_count))
+			dp_catalog_aux_update_cfg(aux->catalog,
+				aux->dp_aux.cfg, PHY_AUX_CFG1);
+		dp_catalog_aux_reset(aux->catalog);
+		goto unlock_exit;
+	} else if (ret < 0) {
+		goto unlock_exit;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		if (aux->read)
+			dp_aux_cmd_fifo_rx(aux, msg);
+
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+	} else {
+		/* Reply defer to retry */
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+	}
+
+	/* Return requested size for success or retry */
+	ret = msg->size;
+	aux->retry_cnt = 0;
+
+unlock_exit:
+	aux->cmd_busy = false;
+	mutex_unlock(&aux->mutex);
+	return ret;
+}
+
+static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg *aux_cfg)
+{
+	int i = 0;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++)
+		aux_cfg[i].current_index = 0;
+}
+
+void dp_aux_isr(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->isr = dp_catalog_aux_get_irq(aux->catalog);
+
+	if (!aux->cmd_busy)
+		return;
+
+	if (aux->native)
+		dp_aux_native_handler(aux);
+	else
+		dp_aux_i2c_handler(aux);
+}
+
+void dp_aux_reconfig(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_update_cfg(aux->catalog,
+			dp_aux->cfg, PHY_AUX_CFG1);
+	dp_catalog_aux_reset(aux->catalog);
+}
+
+void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_aux_reset_phy_config_indices(aux_cfg);
+	dp_catalog_aux_setup(aux->catalog, aux_cfg);
+	dp_catalog_aux_reset(aux->catalog);
+	dp_catalog_aux_enable(aux->catalog, true);
+	aux->retry_cnt = 0;
+}
+
+void dp_aux_deinit(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_enable(aux->catalog, false);
+}
+
+int dp_aux_register(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+	int ret = 0;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->drm_aux.name = "dpu_dp_aux";
+	aux->drm_aux.dev = aux->dev;
+	aux->drm_aux.transfer = dp_aux_transfer;
+	ret = drm_dp_aux_register(&aux->drm_aux);
+	if (ret) {
+		DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
+		goto exit;
+	}
+	dp_aux->drm_aux = &aux->drm_aux;
+exit:
+	return ret;
+}
+
+void dp_aux_unregister(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+	drm_dp_aux_unregister(&aux->drm_aux);
+}
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg)
+{
+	int rc = 0;
+	struct dp_aux_private *aux;
+	struct dp_aux *dp_aux;
+
+	if (!catalog || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
+	if (!aux) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&aux->comp);
+	aux->cmd_busy = false;
+	mutex_init(&aux->mutex);
+
+	aux->dev = dev;
+	aux->catalog = catalog;
+	aux->dp_aux.cfg = aux_cfg;
+	dp_aux = &aux->dp_aux;
+	aux->retry_cnt = 0;
+
+	return dp_aux;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_aux_put(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux)
+		return;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	mutex_destroy(&aux->mutex);
+
+	devm_kfree(aux->dev, aux);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
new file mode 100644
index 0000000..8ce2221
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_AUX_H_
+#define _DP_AUX_H_
+
+#include "dp_catalog.h"
+#include <drm/drm_dp_helper.h>
+
+enum dp_aux_error {
+	DP_AUX_ERR_NONE	= 0,
+	DP_AUX_ERR_ADDR	= -1,
+	DP_AUX_ERR_TOUT	= -2,
+	DP_AUX_ERR_NACK	= -3,
+	DP_AUX_ERR_DEFER	= -4,
+	DP_AUX_ERR_NACK_DEFER	= -5,
+};
+
+struct dp_aux {
+	struct drm_dp_aux *drm_aux;
+	struct dp_aux_cfg *cfg;
+};
+
+int dp_aux_register(struct dp_aux *aux);
+void dp_aux_unregister(struct dp_aux *aux);
+void dp_aux_isr(struct dp_aux *aux);
+void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
+void dp_aux_deinit(struct dp_aux *aux);
+void dp_aux_reconfig(struct dp_aux *aux);
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg);
+void dp_aux_put(struct dp_aux *aux);
+
+#endif /*__DP_AUX_H_*/
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
new file mode 100644
index 0000000..51e21bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -0,0 +1,841 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <drm/drm_dp_helper.h>
+
+#include "dp_catalog.h"
+#include "dp_reg.h"
+
+#define POLLING_SLEEP_US			1000
+#define POLLING_TIMEOUT_US			10000
+
+#define REFTIMER_DEFAULT_VALUE			0x20000
+#define SCRAMBLER_RESET_COUNT_VALUE		0xFC
+
+#define DP_INTERRUPT_STATUS_ACK_SHIFT	1
+#define DP_INTERRUPT_STATUS_MASK_SHIFT	2
+
+#define DP_INTERRUPT_STATUS1 \
+	(DP_INTR_AUX_I2C_DONE| \
+	DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
+	DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
+	DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
+	DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
+
+#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+#define DP_INTERRUPT_STATUS2 \
+	(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
+	DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
+
+#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+static u8 const vm_pre_emphasis[4][4] = {
+	{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
+	{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
+	{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
+	{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static u8 const vm_voltage_swing[4][4] = {
+	{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
+	{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
+	{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
+	{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
+};
+
+struct dp_catalog_private {
+	struct device *dev;
+	struct dp_io *io;
+	struct dp_catalog dp_catalog;
+};
+
+static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_aux.base + offset);
+}
+
+static inline void dp_write_aux(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure aux reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_aux.base + offset);
+}
+
+static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_ahb.base + offset);
+}
+
+static inline void dp_write_ahb(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_ahb.base + offset);
+}
+
+static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_cc_io.base + offset);
+}
+
+static inline void dp_write_phy(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->phy_io.base + offset);
+}
+
+static inline void dp_write_pll(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
+}
+
+static inline void dp_write_ln_tx0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
+}
+
+static inline void dp_write_ln_tx1(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
+}
+
+static inline void dp_write_usb_cm(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure usb reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->usb3_dp_com.base + offset);
+}
+
+static inline void dp_write_p0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure interface reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_p0.base + offset);
+}
+
+static inline u32 dp_read_link(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_link.base + offset);
+}
+
+static inline void dp_write_link(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure link reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_link.base + offset);
+}
+
+/* aux related catalog functions */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_aux(catalog, REG_DP_AUX_DATA);
+}
+
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read)
+{
+	int rc = 0;
+	u32 data = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (read) {
+		data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
+		data &= ~DP_AUX_TRANS_CTRL_GO;
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
+	} else {
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
+	}
+	return rc;
+}
+
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	aux_ctrl |= DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	aux_ctrl &= ~DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	if (enable) {
+		dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
+		dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
+		aux_ctrl |= DP_AUX_CTRL_ENABLE;
+	} else {
+		aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
+	}
+
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 new_index = 0, current_index = 0;
+
+	if (type >= PHY_AUX_CFG_MAX) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	current_index = cfg[type].current_index;
+	new_index = (current_index + 1) % cfg[type].cfg_cnt;
+	DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
+		dp_phy_aux_config_type_to_string(type),
+	cfg[type].lut[current_index], cfg[type].lut[new_index]);
+
+	dp_write_phy(catalog, cfg[type].offset,
+			cfg[type].lut[new_index]);
+	cfg[type].current_index = new_index;
+}
+
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	int i = 0;
+
+	dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
+		DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+		DP_PHY_PD_CTL_DP_CLAMP_EN);
+
+	/* Turn on BIAS current for PHY/PLL */
+	dp_write_pll(catalog,
+		QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
+		QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
+		QSERDES_COM_EN_SYSCLK_TX_SEL);
+
+	/* DP AUX CFG register programming */
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
+			dp_phy_aux_config_type_to_string(i),
+			cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
+		dp_write_phy(catalog, cfg[i].offset,
+			cfg[i].lut[cfg[i].current_index]);
+	}
+
+	dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK, PHY_AUX_STOP_ERR_MASK |
+			PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
+			PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
+}
+
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
+	intr &= ~DP_INTERRUPT_STATUS1_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS1) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack | DP_INTERRUPT_STATUS1_MASK);
+
+	return intr;
+
+}
+
+/* controller related catalog functions */
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
+	dp_write_link(catalog, REG_DP_TU, dp_tu);
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
+}
+
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_STATE_CTRL, state);
+}
+
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
+
+	dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
+}
+
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
+	u32 ln_mapping;
+
+	ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
+	ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
+	ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
+	ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
+
+	dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING, ln_mapping);
+}
+
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	u32 mainlink_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (enable) {
+		/*
+		* To make sure link reg writes happens before any other operation,
+		* dp_write_link() function uses writel() instread of writel_relaxed()
+		*/
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
+	} else {
+		mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
+		mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
+	}
+}
+
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
+					u32 colorimetry_cfg, u32 test_bits_depth)
+{
+	u32 misc_val;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
+	misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
+	misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
+	/* Configure clock to synchronous mode */
+	misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
+
+	DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
+	dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
+}
+
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
+					u32 rate, u32 stream_rate_khz,
+					bool fixed_nvid)
+{
+	u32 pixel_m, pixel_n;
+	u32 mvid, nvid;
+	u64 mvid_calc;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (fixed_nvid) {
+		nvid = DP_LINK_CONSTANT_N_VALUE;
+		DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
+
+		/*
+		 * For intermediate results, use 64 bit arithmetic to avoid
+		 * loss of precision.
+		 */
+		mvid_calc = (u64) stream_rate_khz * nvid;
+		mvid_calc = div_u64(mvid_calc, rate);
+
+		/*
+		 * truncate back to 32 bits as this final divided value will
+		 * always be within the range of a 32 bit unsigned int.
+		 */
+		mvid = (u32) mvid_calc;
+		DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
+			rate, stream_rate_khz);
+	} else {
+		pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
+		pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
+		DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
+
+		mvid = (pixel_m & 0xFFFF) * 5;
+		nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
+
+		DRM_DEBUG_DP("rate = %d\n", rate);
+
+		switch (drm_dp_link_rate_to_bw_code(rate)) {
+		case DP_LINK_BW_5_4:
+			nvid *= 2;
+			break;
+		case DP_LINK_BW_8_1:
+			nvid *= 3;
+			break;
+		default:
+			break;
+		}
+	}
+
+	DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
+}
+
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
+					u32 pattern)
+{
+	int bit, ret;
+	u32 data;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	bit = BIT(pattern - 1);
+	DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
+	dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
+
+	bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl, catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & bit,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
+		return ret;
+	}
+	return 0;
+}
+
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 typec_ctrl;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
+			USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
+			USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
+						USB3_DP_COM_PHY_MODE_DP);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
+						USB3_DP_COM_SW_RESET_SET);
+
+	/* Default configuration i.e CC1 */
+	typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
+	if (flip)
+		typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
+						USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
+
+}
+
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
+{
+	u32 sw_reset;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
+
+	sw_reset |= DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	sw_reset &= ~DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+}
+
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
+{
+	u32 data;
+	int ret;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl,
+				 catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & DP_MAINLINK_READY_FOR_VIDEO,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("mainlink not ready\n");
+		return false;
+	}
+
+	return true;
+}
+
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	if (enable) {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, DP_INTERRUPT_STATUS1_MASK);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, DP_INTERRUPT_STATUS2_MASK);
+	} else {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
+	}
+}
+
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool en)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (en) {
+		u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
+
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
+				DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
+				DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
+				DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
+				DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
+
+		/* Configure REFTIMER */
+		reftimer |= REFTIMER_DEFAULT_VALUE;
+		dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
+		/* Enable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
+	} else {
+		/* Disable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
+	}
+}
+
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
+	intr &= ~DP_INTERRUPT_STATUS2_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS2) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack | DP_INTERRUPT_STATUS2_MASK);
+
+	return intr;
+}
+
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL,
+			DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
+}
+
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
+		bool flipped, u8 ln_cnt)
+{
+	u32 info;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 orientation = BIT(!!flipped);
+
+	info = ln_cnt & DP_PHY_SPARE0_MASK;
+	info |= (orientation & DP_PHY_SPARE0_MASK) << DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
+	DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
+
+	dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
+}
+
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
+		u8 v_level, u8 p_level)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 voltage_swing_cfg, pre_emphasis_cfg;
+
+	DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
+
+	voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
+	pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
+
+	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
+		DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
+			v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
+		return -EINVAL;
+	}
+
+	/* Enable MUX to use Cursor values from these registers */
+	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+	/* Configure host and panel only if both values are allowed */
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
+			voltage_swing_cfg, pre_emphasis_cfg);
+
+	return 0;
+}
+
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+			u32 pattern)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 value = 0x0;
+
+	/* Make sure to clear the current pattern before starting a new one */
+	dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
+
+	switch (pattern) {
+	case DP_LINK_QUAL_PATTERN_D10_2:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
+		return;
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
+		return;
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
+		/* 00111110000011111000001111100000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0, 0x3E0F83E0);
+		/* 00001111100000111110000011111000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1, 0x0F83E0F8);
+		/* 1111100000111110 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2, 0x0000F83E);
+		return;
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+		value &= ~DP_HBR2_ERM_PATTERN;
+		if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
+			value = DP_HBR2_ERM_PATTERN;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		value |= SCRAMBLER_RESET_COUNT_VALUE;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		dp_write_link(catalog, REG_DP_MAINLINK_LEVELS, DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
+		return;
+	default:
+		DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
+		return;
+	}
+}
+
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_link(catalog, REG_DP_MAINLINK_READY);
+}
+
+/* panel related catalog functions */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
+	dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC, dp_catalog->sync_start);
+	dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY, dp_catalog->width_blanking);
+	dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
+	return 0;
+}
+
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 hsync_period, vsync_period;
+	u32 display_v_start, display_v_end;
+	u32 hsync_start_x, hsync_end_x;
+	u32 v_sync_width;
+	u32 hsync_ctl;
+	u32 display_hctl;
+
+	/* TPG config parameters*/
+	hsync_period = drm_mode->htotal;
+	vsync_period = drm_mode->vtotal;
+
+	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
+					hsync_period);
+	display_v_end = ((vsync_period - drm_mode->vsync_start -
+					drm_mode->vdisplay) * hsync_period) - 1;
+
+	display_v_start += drm_mode->htotal - drm_mode->hsync_start;
+	display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
+
+	hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
+	hsync_end_x = hsync_period - drm_mode->hsync_start -
+					drm_mode->hdisplay - 1;
+
+	v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
+
+	hsync_ctl = (hsync_period << 16) |
+			(drm_mode->hsync_end - drm_mode->hsync_start);
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+
+	dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
+	dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, DP_TPG_CHECKERED_RECT_PATTERN);
+	dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
+					DP_TPG_VIDEO_CONFIG_BPP_8BIT |
+					DP_TPG_VIDEO_CONFIG_RGB);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, DP_TIMING_ENGINE_EN_EN);
+	DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
+}
+
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
+	return;
+}
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io)
+{
+	int rc = 0;
+	struct dp_catalog *dp_catalog;
+	struct dp_catalog_private *catalog;
+
+	if (!io) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
+	if (!catalog) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	catalog->dev = dev;
+	catalog->io = io;
+
+	dp_catalog = &catalog->dp_catalog;
+
+	return dp_catalog;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_catalog_put(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog;
+
+	if (!dp_catalog)
+		return;
+
+	catalog = container_of(dp_catalog, struct dp_catalog_private,
+				dp_catalog);
+
+	devm_kfree(catalog->dev, catalog);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
new file mode 100644
index 0000000..51c82dd
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CATALOG_H_
+#define _DP_CATALOG_H_
+
+#include "dp_parser.h"
+
+/* interrupts */
+#define DP_INTR_HPD		BIT(0)
+#define DP_INTR_AUX_I2C_DONE	BIT(3)
+#define DP_INTR_WRONG_ADDR	BIT(6)
+#define DP_INTR_TIMEOUT		BIT(9)
+#define DP_INTR_NACK_DEFER	BIT(12)
+#define DP_INTR_WRONG_DATA_CNT	BIT(15)
+#define DP_INTR_I2C_NACK	BIT(18)
+#define DP_INTR_I2C_DEFER	BIT(21)
+#define DP_INTR_PLL_UNLOCKED	BIT(24)
+#define DP_INTR_AUX_ERROR	BIT(27)
+
+#define DP_INTR_READY_FOR_VIDEO		BIT(0)
+#define DP_INTR_IDLE_PATTERN_SENT	BIT(3)
+#define DP_INTR_FRAME_END		BIT(6)
+#define DP_INTR_CRC_UPDATED		BIT(9)
+
+struct dp_catalog {
+	u32 aux_data;
+	u32 total;
+	u32 sync_start;
+	u32 width_blanking;
+	u32 dp_active;
+};
+
+/* AUX APIs */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read);
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *aux_cfg);
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
+
+/* DP Controller APIs */
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 config);
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32 cc, u32 tb);
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32 rate,
+				u32 stream_rate_khz, bool fixed_nvid);
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32 pattern);
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip);
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool flipped,
+				u8 lane_cnt);
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8 v_level,
+				u8 p_level);
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+				u32 pattern);
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
+
+/* DP Panel APIs */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode);
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io);
+void dp_catalog_put(struct dp_catalog *catalog);
+
+#endif /* _DP_CATALOG_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
new file mode 100644
index 0000000..a4575ea
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/types.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <drm/drm_fixed.h>
+
+#include "dp_reg.h"
+#include "dp_ctrl.h"
+
+#define DP_KHZ_TO_HZ 1000
+#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES	(30 * HZ / 1000) /* 30 ms */
+#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
+
+#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
+#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
+
+#define MR_LINK_TRAINING1  0x8
+#define MR_LINK_SYMBOL_ERM 0x80
+#define MR_LINK_PRBS7 0x100
+#define MR_LINK_CUSTOM80 0x200
+
+struct dp_tu_calc_input {
+	u64 lclk;        /* 162, 270, 540 and 810 */
+	u64 pclk_khz;    /* in KHz */
+	u64 hactive;     /* active h-width */
+	u64 hporch;      /* bp + fp + pulse */
+	int nlanes;      /* no.of.lanes */
+	int bpp;         /* bits */
+	int pixel_enc;   /* 444, 420, 422 */
+	int dsc_en;     /* dsc on/off */
+	int async_en;   /* async mode */
+};
+
+struct dp_vc_tu_mapping_table {
+	u8 valid_boundary_link;
+	u16 delay_start_link;
+	bool boundary_moderation_en;
+	u8 valid_lower_boundary_link;
+	u8 upper_boundary_count;
+	u8 lower_boundary_count;
+	u8 tu_size_minus1;
+};
+
+struct dp_ctrl_private {
+	struct dp_ctrl dp_ctrl;
+
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_panel *panel;
+	struct dp_link *link;
+	struct dp_power *power;
+	struct dp_parser *parser;
+	struct dp_catalog *catalog;
+
+	struct completion idle_comp;
+	struct mutex push_idle_mutex;
+	struct completion video_comp;
+};
+
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_lock(&ctrl->push_idle_mutex);
+
+	reinit_completion(&ctrl->idle_comp);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
+
+	if (!wait_for_completion_timeout(&ctrl->idle_comp,
+			IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
+		pr_warn("PUSH_IDLE pattern timedout\n");
+
+	mutex_unlock(&ctrl->push_idle_mutex);
+	pr_debug("mainlink off done\n");
+}
+
+static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
+{
+	u32 config = 0, tbd;
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/* Default-> LSCLK DIV: 1/4 LCLK  */
+	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
+
+	/* Scrambler reset enable */
+	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
+		config |= DP_CONFIGURATION_CTRL_ASSR;
+
+	tbd = dp_link_get_test_bits_depth(ctrl->link,
+			ctrl->panel->dp_mode.bpp);
+
+	if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
+		pr_debug("BIT_DEPTH not set. Configure default\n");
+		tbd = DP_TEST_BIT_DEPTH_8;
+	}
+
+	config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
+
+	/* Num of Lanes */
+	config |= ((ctrl->link->link_params.num_lanes - 1)
+			<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
+
+	if (drm_dp_enhanced_frame_cap(dpcd))
+		config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
+
+	config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
+
+	/* sync clock & static Mvid */
+	config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
+	config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
+
+	dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
+}
+
+/**
+ * dp_ctrl_configure_source_params() - configures DP transmitter source params
+ * @ctrl: Display Port Driver data
+ *
+ * Configures the DP transmitter source params including details such as lane
+ * configuration, output format and sink/panel timing information.
+ */
+static void dp_ctrl_configure_source_params(struct dp_ctrl_private *ctrl)
+{
+	u32 cc, tb;
+
+	dp_catalog_ctrl_lane_mapping(ctrl->catalog);
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	tb = dp_link_get_test_bits_depth(ctrl->link,
+		ctrl->panel->dp_mode.bpp);
+	cc = dp_link_get_colorimetry_config(ctrl->link);
+	dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
+	dp_panel_timing_cfg(ctrl->panel);
+}
+
+/*
+ * The structure and few functions present below are IP/Hardware
+ * specific implementation. Most of the implementation will not
+ * have coding comments
+ */
+struct tu_algo_data {
+	s64 lclk_fp;
+	s64 pclk_fp;
+	s64 lwidth;
+	s64 hbp_relative_to_pclk;
+	int nlanes;
+	int bpp;
+	int pixelEnc;
+	int dsc_en;
+	int async_en;
+	int bpc;
+
+	uint delay_start_link_extra_pixclk;
+	int extra_buffer_margin;
+	s64 ratio_fp;
+	s64 original_ratio_fp;
+
+	s64 err_fp;
+	s64 n_err_fp;
+	s64 n_n_err_fp;
+	int tu_size;
+	int tu_size_desired;
+	int tu_size_minus1;
+
+	int valid_boundary_link;
+	s64 resulting_valid_fp;
+	s64 total_valid_fp;
+	s64 effective_valid_fp;
+	s64 effective_valid_recorded_fp;
+	int n_tus;
+	int n_tus_per_lane;
+	int paired_tus;
+	int remainder_tus;
+	int remainder_tus_upper;
+	int remainder_tus_lower;
+	int extra_bytes;
+	int filler_size;
+	int delay_start_link;
+
+	int extra_pclk_cycles;
+	int extra_pclk_cycles_in_link_clk;
+	s64 ratio_by_tu_fp;
+	s64 average_valid2_fp;
+	int new_valid_boundary_link;
+	int remainder_symbols_exist;
+	int n_symbols;
+	s64 n_remainder_symbols_per_lane_fp;
+	s64 last_partial_tu_fp;
+	s64 TU_ratio_err_fp;
+
+	int n_tus_incl_last_incomplete_tu;
+	int extra_pclk_cycles_tmp;
+	int extra_pclk_cycles_in_link_clk_tmp;
+	int extra_required_bytes_new_tmp;
+	int filler_size_tmp;
+	int lower_filler_size_tmp;
+	int delay_start_link_tmp;
+
+	bool boundary_moderation_en;
+	int boundary_mod_lower_err;
+	int upper_boundary_count;
+	int lower_boundary_count;
+	int i_upper_boundary_count;
+	int i_lower_boundary_count;
+	int valid_lower_boundary_link;
+	int even_distribution_BF;
+	int even_distribution_legacy;
+	int even_distribution;
+	int min_hblank_violated;
+	s64 delay_start_time_fp;
+	s64 hbp_time_fp;
+	s64 hactive_time_fp;
+	s64 diff_abs_fp;
+
+	s64 ratio;
+};
+
+static int _tu_param_compare(s64 a, s64 b)
+{
+	u32 a_int, a_frac;
+	u32 b_int, b_frac;
+
+	if (a == b)
+		return 0;
+
+	a_int = (a >> 32) & 0x7FFFFFFF;
+	a_frac = a & 0xFFFFFFFF;
+
+	b_int = (b >> 32) & 0x7FFFFFFF;
+	b_frac = b & 0xFFFFFFFF;
+
+	if (a_int > b_int)
+		return 1;
+	else if (a_int < b_int)
+		return 2;
+	else if (a_frac > b_frac)
+		return 1;
+	else
+		return 2;
+}
+
+static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
+{
+	s64 temp1_fp, temp2_fp, temp, temp1, temp2;
+	int compare_result_1, compare_result_2, compare_result_3;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+
+	tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp = (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link-1));
+	tu->average_valid2_fp = drm_fixp_from_fraction(temp,
+					(tu->i_upper_boundary_count +
+					tu->i_lower_boundary_count));
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+	tu->n_tus = drm_fixp2int(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu->n_remainder_symbols_per_lane_fp = temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	tu->last_partial_tu_fp =
+			drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
+					temp1_fp);
+
+	if (tu->n_remainder_symbols_per_lane_fp != 0)
+		tu->remainder_symbols_exist = 1;
+	else
+		tu->remainder_symbols_exist = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
+	tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
+
+	tu->paired_tus = (int)((tu->n_tus_per_lane) /
+					(tu->i_upper_boundary_count +
+					 tu->i_lower_boundary_count));
+
+	tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
+						(tu->i_upper_boundary_count +
+						tu->i_lower_boundary_count);
+
+	if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
+		tu->remainder_tus_upper = tu->i_upper_boundary_count;
+		tu->remainder_tus_lower = tu->remainder_tus -
+						tu->i_upper_boundary_count;
+	} else {
+		tu->remainder_tus_upper = tu->remainder_tus;
+		tu->remainder_tus_lower = 0;
+	}
+
+	temp = tu->paired_tus * (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link - 1)) +
+				(tu->remainder_tus_upper *
+				 tu->new_valid_boundary_link) +
+				(tu->remainder_tus_lower *
+				(tu->new_valid_boundary_link - 1));
+	tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
+
+	if (tu->remainder_symbols_exist) {
+		temp1_fp = tu->total_valid_fp +
+				tu->n_remainder_symbols_per_lane_fp;
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp2_fp = temp2_fp + tu->last_partial_tu_fp;
+		temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	} else {
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
+	}
+	tu->effective_valid_fp = temp1_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
+
+	tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+
+	if (temp2_fp)
+		tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu->n_tus_incl_last_incomplete_tu = 0;
+
+	temp1 = 0;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = tu->average_valid2_fp - temp2_fp;
+	temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		temp1 = drm_fixp2int_ceil(temp1_fp);
+
+	temp = tu->i_upper_boundary_count * tu->nlanes;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp2_fp)
+		temp2 = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp2 = 0;
+	tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
+
+	temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
+	temp2_fp = drm_fixp_from_fraction(
+	tu->extra_required_bytes_new_tmp, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_tmp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
+	temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_in_link_clk_tmp =
+						drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_in_link_clk_tmp = 0;
+
+	tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
+
+	tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
+
+	tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
+					tu->lower_filler_size_tmp +
+					tu->extra_buffer_margin;
+
+	temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
+	tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu->n_n_err_fp, tu->diff_abs_fp);
+	if (compare_result_1 == 2)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
+	if (compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
+					tu->delay_start_time_fp);
+	if (compare_result_3 == 2)
+		compare_result_3 = 0;
+	else
+		compare_result_3 = 1;
+
+	if (((tu->even_distribution == 1) ||
+			((tu->even_distribution_BF == 0) &&
+			(tu->even_distribution_legacy == 0))) &&
+			tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
+			compare_result_2 &&
+			(compare_result_1 || (tu->min_hblank_violated == 1)) &&
+			(tu->new_valid_boundary_link - 1) > 0 &&
+			compare_result_3 &&
+			(tu->delay_start_link_tmp <= 1023)) {
+		tu->upper_boundary_count = tu->i_upper_boundary_count;
+		tu->lower_boundary_count = tu->i_lower_boundary_count;
+		tu->err_fp = tu->n_n_err_fp;
+		tu->boundary_moderation_en = true;
+		tu->tu_size_desired = tu->tu_size;
+		tu->valid_boundary_link = tu->new_valid_boundary_link;
+		tu->effective_valid_recorded_fp = tu->effective_valid_fp;
+		tu->even_distribution_BF = 1;
+		tu->delay_start_link = tu->delay_start_link_tmp;
+	} else if (tu->boundary_mod_lower_err == 0) {
+		compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
+							tu->diff_abs_fp);
+		if (compare_result_1 == 2)
+			tu->boundary_mod_lower_err = 1;
+	}
+}
+
+static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
+				   struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct tu_algo_data tu;
+	int compare_result_1, compare_result_2;
+	u64 temp = 0;
+	s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
+
+	s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006 */
+	s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
+	s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
+	s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
+
+	u8 DP_BRUTE_FORCE = 1;
+	s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1 */
+	uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
+	uint HBLANK_MARGIN = 4;
+
+	memset(&tu, 0, sizeof(tu));
+
+	tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
+	tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
+	tu.lwidth               = in->hactive;
+	tu.hbp_relative_to_pclk = in->hporch;
+	tu.nlanes               = in->nlanes;
+	tu.bpp                  = in->bpp;
+	tu.pixelEnc             = in->pixel_enc;
+	tu.dsc_en               = in->dsc_en;
+	tu.async_en             = in->async_en;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
+
+	if (tu.pixelEnc == 420) {
+		temp_fp = drm_fixp_from_fraction(2, 1);
+		tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
+		tu.lwidth /= 2;
+		tu.hbp_relative_to_pclk /= 2;
+	}
+
+	if (tu.pixelEnc == 422) {
+		switch (tu.bpp) {
+		case 24:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		case 30:
+			tu.bpp = 20;
+			tu.bpc = 10;
+			break;
+		default:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		}
+	} else {
+		tu.bpc = tu.bpp/3;
+	}
+
+	temp1_fp = drm_fixp_from_fraction(4, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
+	temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
+	tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
+
+	tu.original_ratio_fp = tu.ratio_fp;
+	tu.boundary_moderation_en = false;
+	tu.upper_boundary_count = 0;
+	tu.lower_boundary_count = 0;
+	tu.i_upper_boundary_count = 0;
+	tu.i_lower_boundary_count = 0;
+	tu.valid_lower_boundary_link = 0;
+	tu.even_distribution_BF = 0;
+	tu.even_distribution_legacy = 0;
+	tu.even_distribution = 0;
+	tu.delay_start_time_fp = 0;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1);
+	tu.n_err_fp = 0;
+	tu.n_n_err_fp = 0;
+
+	tu.ratio = drm_fixp2int(tu.ratio_fp);
+	if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
+			!tu.ratio && tu.dsc_en == 0) {
+		tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
+		tu.ratio = drm_fixp2int(tu.ratio_fp);
+		if (tu.ratio)
+			tu.ratio_fp = drm_fixp_from_fraction(1, 1);
+	}
+
+	if (tu.ratio > 1)
+		tu.ratio = 1;
+
+	if (tu.ratio == 1)
+		goto tu_size_calc;
+
+	compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
+	if (!compare_result_1 || compare_result_1 == 1)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
+	if (!compare_result_2 || compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	if (tu.dsc_en && compare_result_1 && compare_result_2) {
+		HBLANK_MARGIN += 4;
+		DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
+	}
+
+tu_size_calc:
+	for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+		temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
+		temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+		temp = drm_fixp2int_ceil(temp2_fp);
+		temp1_fp = drm_fixp_from_fraction(temp, 1);
+		tu.n_err_fp = temp1_fp - temp2_fp;
+
+		if (tu.n_err_fp < tu.err_fp) {
+			tu.err_fp = tu.n_err_fp;
+			tu.tu_size_desired = tu.tu_size;
+		}
+	}
+
+	tu.tu_size_minus1 = tu.tu_size_desired - 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+	tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.n_tus = drm_fixp2int(temp2_fp);
+
+	tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
+	DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
+		tu.valid_boundary_link, tu.n_tus);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp2_fp);
+	if (temp && temp2_fp)
+		tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu.extra_bytes = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
+	temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles = 0;
+
+	temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+	temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles_in_link_clk = 0;
+
+	tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+
+	tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
+				tu.filler_size + tu.extra_buffer_margin;
+
+	tu.resulting_valid_fp =
+			drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+	tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+
+	temp1_fp = drm_fixp_from_fraction(
+			(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
+	tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
+					tu.delay_start_time_fp);
+	if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp) */
+		tu.min_hblank_violated = 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
+						tu.delay_start_time_fp);
+	if (compare_result_2 == 2)
+		tu.min_hblank_violated = 1;
+
+	tu.delay_start_time_fp = 0;
+
+	/* brute force */
+
+	tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
+	tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
+
+	temp = drm_fixp2int(tu.diff_abs_fp);
+	if (!temp && tu.diff_abs_fp <= 0xffff)
+		tu.diff_abs_fp = 0;
+
+	/* if(diff_abs < 0) diff_abs *= -1 */
+	if (tu.diff_abs_fp < 0)
+		tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
+
+	tu.boundary_mod_lower_err = 0;
+	if ((tu.diff_abs_fp != 0 &&
+			((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
+			 (tu.even_distribution_legacy == 0) ||
+			 (DP_BRUTE_FORCE == 1))) ||
+			(tu.min_hblank_violated == 1)) {
+		do {
+			tu.err_fp = drm_fixp_from_fraction(1000, 1);
+
+			temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+			temp2_fp = drm_fixp_from_fraction(
+					tu.delay_start_link_extra_pixclk, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.extra_buffer_margin =
+					drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.extra_buffer_margin = 0;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.n_symbols = 0;
+
+			for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+				for (tu.i_upper_boundary_count = 1;
+					tu.i_upper_boundary_count <= 15;
+					tu.i_upper_boundary_count++) {
+					for (tu.i_lower_boundary_count = 1;
+						tu.i_lower_boundary_count <= 15;
+						tu.i_lower_boundary_count++) {
+						_tu_valid_boundary_calc(&tu);
+					}
+				}
+			}
+			tu.delay_start_link_extra_pixclk--;
+		} while (tu.boundary_moderation_en != true &&
+			tu.boundary_mod_lower_err == 1 &&
+			tu.delay_start_link_extra_pixclk != 0);
+
+		if (tu.boundary_moderation_en == true) {
+			temp1_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count *
+					tu.valid_boundary_link +
+					tu.lower_boundary_count *
+					(tu.valid_boundary_link - 1)), 1);
+			temp2_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count +
+					tu.lower_boundary_count), 1);
+			tu.resulting_valid_fp =
+					drm_fixp_div(temp1_fp, temp2_fp);
+
+			temp1_fp = drm_fixp_from_fraction(
+					tu.tu_size_desired, 1);
+			tu.ratio_by_tu_fp =
+				drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+
+			tu.valid_lower_boundary_link =
+				tu.valid_boundary_link - 1;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+			temp2_fp = drm_fixp_div(temp1_fp,
+						tu.resulting_valid_fp);
+			tu.n_tus = drm_fixp2int(temp2_fp);
+
+			tu.tu_size_minus1 = tu.tu_size_desired - 1;
+			tu.even_distribution_BF = 1;
+
+			temp1_fp =
+				drm_fixp_from_fraction(tu.tu_size_desired, 1);
+			temp2_fp =
+				drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+			tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+		}
+	}
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
+
+	if (temp2_fp)
+		temp = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+	temp = drm_fixp2int(temp2_fp);
+
+	if (tu.async_en)
+		tu.delay_start_link += (int)temp;
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	/* OUTPUTS */
+	tu_table->valid_boundary_link       = tu.valid_boundary_link;
+	tu_table->delay_start_link          = tu.delay_start_link;
+	tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
+	tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
+	tu_table->upper_boundary_count      = tu.upper_boundary_count;
+	tu_table->lower_boundary_count      = tu.lower_boundary_count;
+	tu_table->tu_size_minus1            = tu.tu_size_minus1;
+
+	DRM_DEBUG_DP("TU: valid_boundary_link: %d\n", tu_table->valid_boundary_link);
+	DRM_DEBUG_DP("TU: delay_start_link: %d\n", tu_table->delay_start_link);
+	DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
+			tu_table->boundary_moderation_en);
+	DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
+			tu_table->valid_lower_boundary_link);
+	DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
+			tu_table->upper_boundary_count);
+	DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
+			tu_table->lower_boundary_count);
+	DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
+}
+
+static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
+		struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct dp_tu_calc_input in;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &ctrl->panel->dp_mode.drm_mode;
+
+	in.lclk = ctrl->link->link_params.rate / 1000;
+	in.pclk_khz = drm_mode->clock;
+	in.hactive = drm_mode->hdisplay;
+	in.hporch = drm_mode->htotal - drm_mode->hdisplay;
+	in.nlanes = ctrl->link->link_params.num_lanes;
+	in.bpp = ctrl->panel->dp_mode.bpp;
+	in.pixel_enc = 444;
+	in.dsc_en = 0;
+	in.async_en = 0;
+
+	_dp_ctrl_calc_tu(&in, tu_table);
+}
+
+static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
+{
+	u32 dp_tu = 0x0;
+	u32 valid_boundary = 0x0;
+	u32 valid_boundary2 = 0x0;
+	struct dp_vc_tu_mapping_table tu_calc_table;
+
+	dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
+
+	dp_tu |= tu_calc_table.tu_size_minus1;
+	valid_boundary |= tu_calc_table.valid_boundary_link;
+	valid_boundary |= (tu_calc_table.delay_start_link << 16);
+
+	valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
+	valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
+	valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
+
+	if (tu_calc_table.boundary_moderation_en)
+		valid_boundary2 |= BIT(0);
+
+	pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
+			dp_tu, valid_boundary, valid_boundary2);
+
+	dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
+				dp_tu, valid_boundary, valid_boundary2);
+}
+
+static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!wait_for_completion_timeout(&ctrl->video_comp,
+				WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
+		DRM_ERROR("Link Train timedout\n");
+		ret = -ETIMEDOUT;
+	}
+	return ret;
+}
+
+static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
+{
+	struct dp_link *link = ctrl->link;
+	int ret = 0, lane, lane_cnt;
+	u8 buf[4];
+	u32 max_level_reached = 0;
+	u32 voltage_swing_level = link->phy_params.v_level;
+	u32 pre_emphasis_level = link->phy_params.p_level;
+
+	ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+		voltage_swing_level, pre_emphasis_level);
+	if (ret)
+		return ret;
+
+	if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("max. voltage swing level reached %d\n",
+				voltage_swing_level);
+		max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
+	}
+
+	if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
+				pre_emphasis_level);
+		max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+	}
+
+	pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	lane_cnt = ctrl->link->link_params.num_lanes;
+	for (lane = 0; lane < lane_cnt; lane++)
+		buf[lane] = voltage_swing_level | pre_emphasis_level | max_level_reached;
+
+	DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level | pre_emphasis_level);
+	ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET, buf, lane_cnt);
+	if (ret == lane_cnt)
+		ret = 0;
+
+	return ret;
+}
+
+static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
+		u8 pattern)
+{
+	u8 buf;
+	int ret = 0;
+
+	DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
+
+	buf = pattern;
+	ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET, buf);
+	return ret == 1;
+}
+
+static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
+				    u8 *link_status)
+{
+	int len = 0;
+	u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
+	u32 link_status_read_max_retries = 100;
+
+	while (--link_status_read_max_retries) {
+		len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
+			link_status);
+		if (len != DP_LINK_STATUS_SIZE) {
+			DRM_ERROR("DP link status read failed, err: %d\n", len);
+			return len;
+		}
+
+		if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
+{
+	int tries, old_v_level, ret = 0;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	int const maximum_retries = 5;
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, DP_TRAINING_PATTERN_1);
+	if (ret)
+		return ret;
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
+		DP_LINK_SCRAMBLING_DISABLE);
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	tries = 0;
+	old_v_level = ctrl->link->phy_params.v_level;
+	for (tries = 0; tries < maximum_retries; tries++) {
+		drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_clock_recovery_ok(link_status,
+			ctrl->link->link_params.num_lanes)) {
+			return ret;
+		}
+
+		if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+			DRM_ERROR_RATELIMITED("max v_level reached\n");
+			return -EAGAIN;
+		}
+
+		if (old_v_level != ctrl->link->phy_params.v_level) {
+			tries = 0;
+			old_v_level = ctrl->link->phy_params.v_level;
+		}
+
+		DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	DRM_ERROR("max tries reached\n");
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	switch (ctrl->link->link_params.rate) {
+	case 810000:
+		ctrl->link->link_params.rate = 540000;
+		break;
+	case 540000:
+		ctrl->link->link_params.rate = 270000;
+		break;
+	case 270000:
+	case 162000:
+	default:
+		ctrl->link->link_params.rate = 162000;
+		break;
+	};
+
+	DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
+
+	return ret;
+}
+
+static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
+{
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
+	drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+}
+
+static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
+{
+	int tries = 0, ret = 0;
+	char pattern;
+	int const maximum_retries = 5;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	if (drm_dp_tps3_supported(ctrl->panel->dpcd))
+		pattern = DP_TRAINING_PATTERN_3;
+	else
+		pattern = DP_TRAINING_PATTERN_2;
+
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
+	if (ret)
+		return ret;
+
+	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
+
+	for (tries = 0; tries <= maximum_retries; tries++) {
+		drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_channel_eq_ok(link_status,
+			ctrl->link->link_params.num_lanes))
+			return ret;
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	u8 encoding = DP_SET_ANSI_8B10B;
+	struct drm_dp_link link_info = {0};
+
+	ctrl->link->phy_params.p_level = 0;
+	ctrl->link->phy_params.v_level = 0;
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
+	if (ret < 0) {
+		DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
+		dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+		return ret;
+	}
+
+	drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
+	drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
+				&encoding, 1);
+
+	ret = dp_ctrl_link_train_1(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #1 successful\n");
+
+	ret = dp_ctrl_link_training_2(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #2 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #2 successful\n");
+
+end:
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	dp_ctrl_clear_training_pattern(ctrl);
+	return ret;
+}
+
+static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool train)
+{
+	bool mainlink_ready = false;
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
+	if (ret)
+		return ret;
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		return ret;
+
+	if (train) {
+		/*
+		 * As part of previous calls, DP controller state might have
+		 * transitioned to PUSH_IDLE. In order to start transmitting a link
+		 * training pattern, we have to first do a DP software reset.
+		 */
+		dp_catalog_ctrl_reset(ctrl->catalog);
+
+		ret = dp_ctrl_link_train(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Set up transfer unit values and set controller state to send
+	 * video.
+	 */
+	dp_ctrl_setup_tr_unit(ctrl);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
+
+	ret = dp_ctrl_wait4video_ready(ctrl);
+	if (ret)
+		return ret;
+
+	mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
+	DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT READY");
+	return ret;
+}
+
+static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
+				   char *name, u32 rate)
+{
+	u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
+	struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
+
+	if (num)
+		cfg->rate = rate;
+	else
+		DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
+}
+
+static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_power_set_link_clk_parent(ctrl->power);
+	dp_power_set_pixel_clk_parent(ctrl->power);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk", ctrl->link->link_params.rate);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk", ctrl->dp_ctrl.pixel_rate);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
+	if (ret)
+		DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
+
+	return ret;
+}
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return -EINVAL;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	ctrl->dp_ctrl.orientation = flip;
+
+	dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
+	dp_catalog_ctrl_phy_reset(ctrl->catalog);
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
+
+	return 0;
+}
+
+/**
+ * dp_ctrl_host_deinit() - Uninitialize DP controller
+ * @ctrl: Display Port Driver data
+ *
+ * Perform required steps to uninitialize DP controller
+ * and its resources.
+ */
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+
+	DRM_DEBUG_DP("Host deinitialized successfully\n");
+}
+
+static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
+{
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/*
+	 * For better interop experience, used a fixed NVID=0x8000
+	 * whenever connected to a VGA dongle downstream.
+	 */
+	if (drm_dp_is_branch(dpcd))
+		return (drm_dp_has_quirk(&ctrl->panel->desc,
+				DP_DPCD_QUIRK_CONSTANT_N));
+
+	return false;
+}
+
+static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+		ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+	/*
+	 * Disable and re-enable the mainlink clock since the
+	 * link clock might have been adjusted as part of the
+	 * link maintenance.
+	 */
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+	/* hw recommended delay before re-enabling clocks */
+	msleep(20);
+
+	ret = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (ret) {
+		DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_ctrl_configure_source_params(ctrl);
+	dp_catalog_ctrl_config_msa(ctrl->catalog,
+		ctrl->link->link_params.rate,
+		ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
+	reinit_completion(&ctrl->idle_comp);
+
+	return ret;
+}
+
+static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	int tries, max_tries = 10;
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+
+	for (tries = 0; tries < max_tries; tries++) {
+		ret = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (ret) {
+			DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
+			break;
+		}
+
+		ret = dp_ctrl_setup_main_link(ctrl, true);
+		if (ret == -EAGAIN) /* try with lower link rate */
+			dp_ctrl_link_rate_down_shift(ctrl);
+	}
+	return ret;
+}
+
+static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!ctrl->link->phy_params.phy_test_pattern_sel) {
+		DRM_DEBUG_DP("no test pattern selected by sink\n");
+		return ret;
+	}
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	/*
+	 * The global reset will need DP link related clocks to be
+	 * running. Add the global reset just before disabling the
+	 * link clocks and core clocks.
+	 */
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_ctrl_off(&ctrl->dp_ctrl);
+	if (ret) {
+		DRM_ERROR("failed to disable DP controller\n");
+		return ret;
+	}
+
+	ret = dp_ctrl_on(&ctrl->dp_ctrl);
+	if (ret)
+		DRM_ERROR("failed to enable DP controller\n");
+
+	return ret;
+}
+
+static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private *ctrl)
+{
+	bool success = false;
+	u32 pattern_sent = 0x0;
+	u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
+
+	DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
+
+	if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+			ctrl->link->phy_params.v_level,
+			ctrl->link->phy_params.p_level)) {
+		DRM_ERROR("Failed to set v/p levels\n");
+		return false;
+	}
+	dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
+	dp_link_send_test_response(ctrl->link);
+
+	pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
+
+	switch (pattern_sent) {
+	case MR_LINK_TRAINING1:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_D10_2;
+		break;
+	case MR_LINK_SYMBOL_ERM:
+		success = (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_ERROR_RATE)
+			|| (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_HBR2_EYE);
+		break;
+	case MR_LINK_PRBS7:
+		success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
+		break;
+	case MR_LINK_CUSTOM80:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
+		break;
+	default:
+		success = false;
+	}
+
+	DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
+						pattern_requested);
+	return success;
+}
+
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 sink_request = 0x0;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	sink_request = ctrl->link->sink_request;
+
+	if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
+		if (dp_ctrl_process_phy_test_request(ctrl)) {
+			DRM_ERROR("process phy_test_req failed\n");
+			return;
+		}
+	}
+
+	if (sink_request & DP_LINK_STATUS_UPDATED)
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
+			return;
+		}
+
+
+	if (sink_request & DP_TEST_LINK_TRAINING) {
+		dp_link_send_test_response(ctrl->link);
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
+			return;
+		}
+	}
+}
+
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	u32 rate = 0;
+	u32 link_train_max_retries = 10;
+	u32 const phy_cts_pixel_clk_khz = 148500;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	rate = ctrl->panel->link_info.rate;
+
+	dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
+	dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("using phy test link parameters\n");
+		if (!ctrl->panel->dp_mode.drm_mode.clock)
+			ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
+	} else {
+		ctrl->link->link_params.rate = rate;
+		ctrl->link->link_params.num_lanes =
+			ctrl->panel->link_info.num_lanes;
+		ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+	}
+
+	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
+		ctrl->link->link_params.rate,
+		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
+
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+			ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+
+	rc = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (rc)
+		return rc;
+
+	while (--link_train_max_retries && !atomic_read(&ctrl->dp_ctrl.aborted)) {
+		rc = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (rc) {
+			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
+			break;
+		}
+		rc = dp_ctrl_setup_main_link(ctrl, true);
+		if (!rc)
+			break;
+		/* try with lower link rate */
+		dp_ctrl_link_rate_down_shift(ctrl);
+	}
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		dp_ctrl_send_phy_test_pattern(ctrl);
+
+	return rc;
+}
+
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	int ret = 0;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	DRM_DEBUG_DP("DP off done\n");
+	return ret;
+}
+
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 isr;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
+
+	if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
+		DRM_DEBUG_DP("dp_video_ready\n");
+		complete(&ctrl->video_comp);
+	}
+
+	if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
+		DRM_DEBUG_DP("idle_patterns_sent\n");
+		complete(&ctrl->idle_comp);
+	}
+}
+
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	struct dp_ctrl *dp_ctrl;
+
+	if (!dev || !panel || !aux ||
+	    !link || !catalog) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&ctrl->idle_comp);
+	init_completion(&ctrl->video_comp);
+	mutex_init(&ctrl->push_idle_mutex);
+
+	/* in parameters */
+	ctrl->parser   = parser;
+	ctrl->panel    = panel;
+	ctrl->power    = power;
+	ctrl->aux      = aux;
+	ctrl->link     = link;
+	ctrl->catalog  = catalog;
+	ctrl->dev      = dev;
+
+	dp_ctrl = &ctrl->dp_ctrl;
+
+	return dp_ctrl;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_destroy(&ctrl->push_idle_mutex);
+
+	devm_kfree(ctrl->dev, ctrl);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
new file mode 100644
index 0000000..99ab4b2
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CTRL_H_
+#define _DP_CTRL_H_
+
+#include "dp_aux.h"
+#include "dp_panel.h"
+#include "dp_link.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+
+struct dp_ctrl {
+	bool orientation;
+	atomic_t aborted;
+	u32 pixel_rate;
+};
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser);
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
+
+#endif /* _DP_CTRL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
new file mode 100644
index 0000000..a893542
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/component.h>
+#include <linux/of_irq.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_extcon.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_panel.h"
+#include "dp_ctrl.h"
+#include "dp_display.h"
+#include "dp_drm.h"
+
+static struct msm_dp *g_dp_display;
+#define HPD_STRING_SIZE 30
+
+struct dp_display_private {
+	char *name;
+	int irq;
+
+	/* state variables */
+	bool core_initialized;
+	bool power_on;
+	bool hpd_irq_on;
+	bool audio_supported;
+
+	struct platform_device *pdev;
+	struct dentry *root;
+	struct completion notification_comp;
+
+	struct dp_usbpd   *usbpd;
+	struct dp_parser  *parser;
+	struct dp_power   *power;
+	struct dp_catalog *catalog;
+	struct dp_aux     *aux;
+	struct dp_link    *link;
+	struct dp_panel   *panel;
+	struct dp_ctrl    *ctrl;
+
+	struct dp_usbpd_cb usbpd_cb;
+	struct dp_display_mode dp_mode;
+	struct msm_dp dp_display;
+};
+
+static const struct of_device_id dp_dt_match[] = {
+	{.compatible = "qcom,dp-display"},
+	{}
+};
+
+static irqreturn_t dp_display_irq(int irq, void *dev_id)
+{
+	struct dp_display_private *dp = dev_id;
+
+	if (!dp) {
+		DRM_ERROR("invalid data\n");
+		return IRQ_NONE;
+	}
+
+	/* DP controller isr */
+	dp_ctrl_isr(dp->ctrl);
+
+	/* DP aux isr */
+	dp_aux_isr(dp->aux);
+
+	return IRQ_HANDLED;
+}
+
+static int dp_display_bind(struct device *dev, struct device *master,
+			   void *data)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+	struct drm_device *drm;
+	struct msm_drm_private *priv;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (!dev || !pdev || !master) {
+		DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
+				dev, pdev, master);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	drm = dev_get_drvdata(master);
+	dp = platform_get_drvdata(pdev);
+	if (!drm || !dp) {
+		DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
+				drm, dp);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp->dp_display.drm_dev = drm;
+	priv = drm->dev_private;
+	priv->dp = &(dp->dp_display);
+
+	rc = dp->parser->parse(dp->parser);
+	if (rc) {
+		DRM_ERROR("device tree parsing failed\n");
+		goto end;
+	}
+
+	rc = dp_aux_register(dp->aux);
+	if (rc) {
+		DRM_ERROR("DRM DP AUX register failed\n");
+		goto end;
+	}
+
+	rc = dp_power_client_init(dp->power);
+	if (rc) {
+		DRM_ERROR("Power client create failed\n");
+		goto end;
+	}
+
+end:
+	return rc;
+}
+
+static void dp_display_unbind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct dp_display_private *dp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct msm_drm_private *priv = drm->dev_private;
+
+	if (!dev || !pdev) {
+		DRM_ERROR("invalid param(s)\n");
+		return;
+	}
+
+	dp = platform_get_drvdata(pdev);
+	if (!dp) {
+		DRM_ERROR("Invalid params\n");
+		return;
+	}
+
+	(void)dp_power_client_deinit(dp->power);
+	(void)dp_aux_unregister(dp->aux);
+	priv->dp = NULL;
+}
+
+static const struct component_ops dp_display_comp_ops = {
+	.bind = dp_display_bind,
+	.unbind = dp_display_unbind,
+};
+
+static bool dp_display_is_ds_bridge(struct dp_panel *panel)
+{
+	return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
+		DP_DWN_STRM_PORT_PRESENT);
+}
+
+static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
+{
+	return dp_display_is_ds_bridge(dp->panel) &&
+		(dp->link->sink_count == 0);
+}
+
+static void dp_display_send_hpd_event(struct msm_dp *dp_display)
+{
+	struct dp_display_private *dp;
+	struct drm_connector *connector;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	connector = dp->dp_display.connector;
+	drm_helper_hpd_irq_event(connector->dev);
+}
+
+static int dp_display_send_hpd_notification(struct dp_display_private *dp,
+					    bool hpd)
+{
+	static bool encoder_mode_set = false;
+	struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
+	struct msm_kms *kms = priv->kms;
+
+	mutex_lock(&dp->dp_display.connect_mutex);
+	if ((hpd && dp->dp_display.is_connected) ||
+			(!hpd && !dp->dp_display.is_connected)) {
+		DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return 0;
+	}
+
+	/* reset video pattern flag on disconnect */
+	if (!hpd)
+		dp->panel->video_test = false;
+
+	dp->dp_display.is_connected = hpd;
+	reinit_completion(&dp->notification_comp);
+
+	if (dp->dp_display.is_connected && dp->dp_display.encoder
+				&& !encoder_mode_set
+				&& kms->funcs->set_encoder_mode) {
+		kms->funcs->set_encoder_mode(kms,
+				dp->dp_display.encoder, false);
+		DRM_DEBUG_DP("set_encoder_mode() Completed\n");
+		encoder_mode_set = true;
+	}
+
+	dp_display_send_hpd_event(&dp->dp_display);
+
+	if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
+		pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&dp->dp_display.connect_mutex);
+	return 0;
+}
+
+static int dp_display_process_hpd_high(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct edid *edid;
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	if (dp->link->psm_enabled)
+		goto notify;
+
+	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
+	if (rc)
+		goto notify;
+
+	dp_link_process_request(dp->link);
+
+	if (dp_display_is_sink_count_zero(dp)) {
+		DRM_DEBUG_DP("no downstream devices connected\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	edid = dp->panel->edid;
+
+	dp->audio_supported = drm_detect_monitor_audio(edid);
+
+	dp_panel_handle_sink_request(dp->panel);
+
+	dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
+notify:
+	dp_display_send_hpd_notification(dp, true);
+
+end:
+	return rc;
+}
+
+static void dp_display_host_init(struct dp_display_private *dp)
+{
+	bool flip = false;
+
+	if (dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already initialized\n");
+		return;
+	}
+
+	if (dp->usbpd->orientation == ORIENTATION_CC2)
+		flip = true;
+
+	dp_power_init(dp->power, flip);
+	dp_ctrl_host_init(dp->ctrl, flip);
+	enable_irq(dp->irq);
+	dp->core_initialized = true;
+}
+
+static void dp_display_host_deinit(struct dp_display_private *dp)
+{
+	if (!dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already off\n");
+		return;
+	}
+
+	dp_ctrl_host_deinit(dp->ctrl);
+	dp_aux_deinit(dp->aux);
+	dp_power_deinit(dp->power);
+	disable_irq(dp->irq);
+	dp->core_initialized = false;
+}
+
+static void dp_display_process_hpd_low(struct dp_display_private *dp)
+{
+	dp_display_send_hpd_notification(dp, false);
+
+	dp_aux_deinit(dp->aux);
+}
+
+static int dp_display_usbpd_configure_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	dp_display_host_init(dp);
+
+	if (dp->usbpd->hpd_high)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_clean(struct dp_display_private *dp)
+{
+	dp_ctrl_push_idle(dp->ctrl);
+	dp_ctrl_off(dp->ctrl);
+}
+
+static int dp_display_usbpd_disconnect_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	rc = dp_display_send_hpd_notification(dp, false);
+
+	/* if cable is disconnected, reset psm_enabled flag */
+	if (!dp->usbpd->alt_mode_cfg_done)
+		dp->link->psm_enabled = false;
+
+	if ((rc < 0) && dp->power_on)
+		dp_display_clean(dp);
+
+	dp_display_host_deinit(dp);
+end:
+	return rc;
+}
+
+static void dp_display_handle_video_request(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
+		/* force disconnect followed by connect */
+		dp->usbpd->connect(dp->usbpd, false);
+		dp->panel->video_test = true;
+		dp->usbpd->connect(dp->usbpd, true);
+		dp_link_send_test_response(dp->link);
+	}
+}
+
+static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
+		dp_display_send_hpd_notification(dp, false);
+
+		if (dp_display_is_sink_count_zero(dp)) {
+			DRM_DEBUG_DP("sink count is zero, nothing to do\n");
+			return 0;
+		}
+
+		return dp_display_process_hpd_high(dp);
+	}
+
+	dp_ctrl_handle_sink_request(dp->ctrl);
+
+	dp_display_handle_video_request(dp);
+
+	return 0;
+}
+
+static int dp_display_usbpd_attention_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		return -EINVAL;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		return -ENODEV;
+	}
+
+	if (dp->usbpd->hpd_irq) {
+		dp->hpd_irq_on = true;
+
+		rc = dp_link_process_request(dp->link);
+		/* check for any test request issued by sink */
+		if (!rc)
+			dp_display_handle_hpd_irq(dp);
+
+		dp->hpd_irq_on = false;
+		goto end;
+	}
+
+	if (!dp->usbpd->hpd_high) {
+		dp_display_process_hpd_low(dp);
+		goto end;
+	}
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
+{
+	dp_ctrl_put(dp->ctrl);
+	dp_link_put(dp->link);
+	dp_panel_put(dp->panel);
+	dp_aux_put(dp->aux);
+	dp_power_put(dp->power);
+	dp_catalog_put(dp->catalog);
+	dp_parser_put(dp->parser);
+}
+
+static int dp_init_sub_modules(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct device *dev = &dp->pdev->dev;
+	struct dp_usbpd_cb *cb = &dp->usbpd_cb;
+	struct dp_panel_in panel_in = {
+		.dev = dev,
+	};
+
+	/* Callback APIs used for cable status change event */
+	cb->configure  = dp_display_usbpd_configure_cb;
+	cb->disconnect = dp_display_usbpd_disconnect_cb;
+	cb->attention  = dp_display_usbpd_attention_cb;
+
+	dp->parser = dp_parser_get(dp->pdev);
+	if (IS_ERR(dp->parser)) {
+		rc = PTR_ERR(dp->parser);
+		DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
+		dp->parser = NULL;
+		goto error_parser;
+	}
+
+	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
+	if (IS_ERR(dp->catalog)) {
+		rc = PTR_ERR(dp->catalog);
+		DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
+		dp->catalog = NULL;
+		goto error_catalog;
+	}
+
+	dp->power = dp_power_get(dp->parser);
+	if (IS_ERR(dp->power)) {
+		rc = PTR_ERR(dp->power);
+		DRM_ERROR("failed to initialize power, rc = %d\n", rc);
+		dp->power = NULL;
+		goto error_power;
+	}
+
+	dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
+	if (IS_ERR(dp->aux)) {
+		rc = PTR_ERR(dp->aux);
+		DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
+		dp->aux = NULL;
+		goto error_aux;
+	}
+
+	dp->link = dp_link_get(dev, dp->aux);
+	if (IS_ERR(dp->link)) {
+		rc = PTR_ERR(dp->link);
+		DRM_ERROR("failed to initialize link, rc = %d\n", rc);
+		dp->link = NULL;
+		goto error_link;
+	}
+
+	panel_in.aux = dp->aux;
+	panel_in.catalog = dp->catalog;
+	panel_in.link = dp->link;
+
+	dp->panel = dp_panel_get(&panel_in);
+	if (IS_ERR(dp->panel)) {
+		rc = PTR_ERR(dp->panel);
+		DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
+		dp->panel = NULL;
+		goto error_panel;
+	}
+
+	dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
+			       dp->power, dp->catalog, dp->parser);
+	if (IS_ERR(dp->ctrl)) {
+		rc = PTR_ERR(dp->ctrl);
+		DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
+		dp->ctrl = NULL;
+		goto error_ctrl;
+	}
+
+	return rc;
+error_ctrl:
+	dp_panel_put(dp->panel);
+error_panel:
+	dp_link_put(dp->link);
+error_link:
+	dp_aux_put(dp->aux);
+error_aux:
+	dp_power_put(dp->power);
+error_power:
+	dp_catalog_put(dp->catalog);
+error_catalog:
+	dp_parser_put(dp->parser);
+error_parser:
+	return rc;
+}
+
+static int dp_display_set_mode(struct msm_dp *dp_display,
+			       struct dp_display_mode *mode)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	dp->panel->dp_mode.bpp = mode->bpp;
+	dp->panel->dp_mode.capabilities = mode->capabilities;
+	dp_panel_init_panel_info(dp->panel);
+	return rc;
+}
+
+static int dp_display_prepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+static int dp_display_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->power_on) {
+		DRM_DEBUG_DP("Link already setup, return\n");
+		return 0;
+	}
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	rc = dp_ctrl_on(dp->ctrl);
+	if (!rc)
+		dp->power_on = true;
+
+	return rc;
+}
+
+static int dp_display_post_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	complete_all(&dp->notification_comp);
+	return rc;
+}
+
+static int dp_display_pre_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_link_psm_config(dp->link, &dp->panel->link_info, true);
+
+	dp_ctrl_push_idle(dp->ctrl);
+	return rc;
+}
+
+static int dp_display_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (!dp->power_on || !dp->core_initialized)
+		goto error;
+
+	dp_ctrl_off(dp->ctrl);
+
+	dp->power_on = false;
+
+	complete_all(&dp->notification_comp);
+error:
+	return rc;
+}
+
+int dp_display_request_irq(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dp_display) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
+	if (dp->irq < 0) {
+		rc = dp->irq;
+		DRM_ERROR("failed to get irq: %d\n", rc);
+		return rc;
+	}
+
+	rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
+		IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
+	if (rc < 0) {
+		DRM_ERROR("failed to request IRQ%u: %d\n",
+				dp->irq, rc);
+		return rc;
+	}
+	disable_irq(dp->irq);
+
+	return 0;
+}
+
+static int dp_display_unprepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
+{
+	const u32 num_components = 3, default_bpp = 24;
+	struct dp_display_private *dp_display;
+	struct drm_dp_link *link_info;
+	u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
+
+	if (!dp || !mode_pclk_khz || !dp->connector) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	link_info = &dp_display->panel->link_info;
+
+	mode_bpp = dp->connector->display_info.bpc * num_components;
+	if (!mode_bpp)
+		mode_bpp = default_bpp;
+
+	mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
+			mode_bpp, mode_pclk_khz);
+
+	mode_rate_khz = mode_pclk_khz * mode_bpp;
+	supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	if (mode_rate_khz > supported_rate_khz)
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+int dp_display_get_modes(struct msm_dp *dp,
+				struct dp_display_mode *dp_mode)
+{
+	struct dp_display_private *dp_display;
+	int ret = 0;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	ret = dp_panel_get_modes(dp_display->panel,
+		dp->connector, dp_mode);
+	if (dp_mode->drm_mode.clock)
+		dp->max_pclk_khz = dp_mode->drm_mode.clock;
+	return ret;
+}
+
+bool dp_display_check_video_test(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return false;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	if (dp_display->panel->video_test)
+		return true;
+
+	return false;
+}
+
+int dp_display_get_test_bpp(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	return dp_link_bit_depth_to_bpp(
+		dp_display->link->test_video.test_bit_depth);
+}
+
+static int dp_display_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!pdev || !pdev->dev.of_node) {
+		DRM_ERROR("pdev not found\n");
+		return -ENODEV;
+	}
+
+	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	init_completion(&dp->notification_comp);
+
+	dp->pdev = pdev;
+	dp->name = "drm_dp";
+
+	rc = dp_init_sub_modules(dp);
+	if (rc) {
+		DRM_ERROR("init sub module failed\n");
+		devm_kfree(&pdev->dev, dp);
+		return -EPROBE_DEFER;
+	}
+
+	platform_set_drvdata(pdev, dp);
+
+	mutex_init(&dp->dp_display.connect_mutex);
+	g_dp_display = &dp->dp_display;
+
+	rc = component_add(&pdev->dev, &dp_display_comp_ops);
+	if (rc) {
+		DRM_ERROR("component add failed, rc=%d\n", rc);
+		dp_display_deinit_sub_modules(dp);
+		devm_kfree(&pdev->dev, dp);
+	}
+
+	return rc;
+}
+
+static int dp_display_remove(struct platform_device *pdev)
+{
+	struct dp_display_private *dp;
+
+	if (!pdev)
+		return -EINVAL;
+
+	dp = platform_get_drvdata(pdev);
+
+	dp_display_deinit_sub_modules(dp);
+
+	platform_set_drvdata(pdev, NULL);
+	devm_kfree(&pdev->dev, dp);
+
+	return 0;
+}
+
+static struct platform_driver dp_display_driver = {
+	.probe  = dp_display_probe,
+	.remove = dp_display_remove,
+	.driver = {
+		.name = "msm-dp-display",
+		.of_match_table = dp_dt_match,
+	},
+};
+
+int __init msm_dp_register(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&dp_display_driver);
+	if (ret) {
+		DRM_ERROR("driver register failed");
+		return ret;
+	}
+
+	return ret;
+}
+
+void __exit msm_dp_unregister(void)
+{
+	platform_driver_unregister(&dp_display_driver);
+}
+
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			struct drm_encoder *encoder)
+{
+	struct msm_drm_private *priv;
+	int ret;
+
+	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
+		return -EINVAL;
+
+	priv = dev->dev_private;
+	dp_display->drm_dev = dev;
+
+	ret = dp_display_request_irq(dp_display);
+	if (ret) {
+		DRM_ERROR("request_irq failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_display->encoder = encoder;
+
+	dp_display->connector = dp_drm_connector_init(dp_display);
+	if (IS_ERR(dp_display->connector)) {
+		ret = PTR_ERR(dp_display->connector);
+		DRM_DEV_ERROR(dev->dev,
+			"failed to create dp connector: %d\n", ret);
+		dp_display->connector = NULL;
+		return ret;
+	}
+
+	priv->connectors[priv->num_connectors++] = dp_display->connector;
+	return 0;
+}
+
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	if (!dp_display->dp_mode.drm_mode.clock) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
+	if (rc) {
+		DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_prepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display enable failed, rc=%d\n", rc);
+		dp_display_unprepare(dp);
+		return rc;
+	}
+
+	rc = dp_display_post_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
+		dp_display_disable(dp);
+		dp_display_unprepare(dp);
+	}
+	return rc;
+}
+
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+
+	rc = dp_display_pre_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_unprepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
+	}
+	return rc;
+}
+
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
+
+	if (dp_display_check_video_test(dp))
+		dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
+	else /* Default num_components per pixel = 3 */
+		dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
+
+	if (!dp_display->dp_mode.bpp)
+		dp_display->dp_mode.bpp = 24; /* Default bpp */
+
+	drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
+
+	dp_display->dp_mode.v_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
+
+	dp_display->dp_mode.h_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
new file mode 100644
index 0000000..c916408
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DISPLAY_H_
+#define _DP_DISPLAY_H_
+
+#include <drm/drmP.h>
+
+#include "dp_panel.h"
+
+struct msm_dp {
+	struct drm_device *drm_dev;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	bool is_connected;
+	struct mutex connect_mutex;
+	u32 max_pclk_khz;
+};
+
+int dp_display_validate_mode(struct msm_dp *dp_display, u32 mode_pclk_khz);
+int dp_display_get_modes(struct msm_dp *dp_display,
+		struct dp_display_mode *dp_mode);
+int dp_display_request_irq(struct msm_dp *dp_display);
+bool dp_display_check_video_test(struct msm_dp *dp_display);
+int dp_display_get_test_bpp(struct msm_dp *dp_display);
+
+#endif /* _DP_DISPLAY_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
new file mode 100644
index 0000000..a72b0bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp]: %s: " fmt, __func__
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_crtc.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_drm.h"
+
+struct dp_connector {
+	struct drm_connector base;
+	struct msm_dp *dp_display;
+};
+#define to_dp_connector(x) container_of(x, struct dp_connector, base)
+
+/**
+ * dp_connector_detect - callback to determine if connector is connected
+ * @connector: Pointer to drm connector structure
+ * @force: Force detect setting from drm framework
+ * Returns: Connector 'is connected' status
+ */
+static enum drm_connector_status dp_connector_detect(struct drm_connector *conn,
+		bool force)
+{
+	struct msm_dp *dp;
+
+	dp = to_dp_connector(conn)->dp_display;
+
+	DRM_DEBUG_DP("is_connected = %s\n",
+		(dp->is_connected) ? "true" : "false");
+
+	return (dp->is_connected) ? connector_status_connected :
+					connector_status_disconnected;
+}
+
+/**
+ * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add()
+ * @connector: Pointer to drm connector structure
+ * Returns: Number of modes added
+ */
+static int dp_connector_get_modes(struct drm_connector *connector)
+{
+	int rc = 0;
+	struct msm_dp *dp;
+	struct dp_display_mode *dp_mode = NULL;
+	struct drm_display_mode *m, drm_mode;
+
+	if (!connector)
+		return 0;
+
+	dp = to_dp_connector(connector)->dp_display;
+
+	dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
+	if (!dp_mode)
+		return 0;
+
+	mutex_lock(&dp->connect_mutex);
+	/* pluggable case assumes EDID is read when HPD */
+	if (dp->is_connected) {
+		/*
+		 *The get_modes() function might return one mode that is stored
+		 * in dp_mode when compliance test is in progress. If not, the
+		 * return value is equal to the total number of modes supported
+		 * by the sink
+		 */
+		rc = dp_display_get_modes(dp, dp_mode);
+		if (rc <= 0) {
+			DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
+			mutex_unlock(&dp->connect_mutex);
+			return rc;
+		}
+		if (dp_mode->drm_mode.clock) { /* valid DP mode */
+			memset(&drm_mode, 0x0, sizeof(drm_mode));
+			drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
+			m = drm_mode_duplicate(connector->dev, &drm_mode);
+			if (!m) {
+				DRM_ERROR("failed to add mode %ux%u\n",
+				       drm_mode.hdisplay,
+				       drm_mode.vdisplay);
+				kfree(dp_mode);
+				mutex_unlock(&dp->connect_mutex);
+				return 0;
+			}
+			drm_mode_probed_add(connector, m);
+		}
+	} else {
+		DRM_DEBUG_DP("No sink connected\n");
+	}
+	mutex_unlock(&dp->connect_mutex);
+	kfree(dp_mode);
+	return rc;
+}
+
+/**
+ * dp_connector_mode_valid - callback to determine if specified mode is valid
+ * @connector: Pointer to drm connector structure
+ * @mode: Pointer to drm mode structure
+ * Returns: Validity status for specified mode
+ */
+static enum drm_mode_status dp_connector_mode_valid(struct drm_connector *connector,
+		struct drm_display_mode *mode)
+{
+	struct msm_dp *dp_disp;
+
+	if (!mode || !connector) {
+		DRM_ERROR("invalid params\n");
+		return MODE_ERROR;
+	}
+
+	dp_disp = to_dp_connector(connector)->dp_display;
+
+	mode->vrefresh = drm_mode_vrefresh(mode);
+
+	if ((dp_disp->max_pclk_khz <= 0) ||
+			(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
+			(mode->clock > dp_disp->max_pclk_khz))
+		return MODE_BAD;
+
+	return dp_display_validate_mode(dp_disp, mode->clock);
+}
+
+static const struct drm_connector_funcs dp_connector_funcs = {
+	.detect = dp_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs dp_connector_helper_funcs = {
+	.get_modes = dp_connector_get_modes,
+	.mode_valid = dp_connector_mode_valid,
+};
+
+/* connector initialization */
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
+{
+	struct drm_connector *connector = NULL;
+	struct dp_connector *dp_connector;
+	int ret;
+
+	dp_connector = devm_kzalloc(dp_display->drm_dev->dev, sizeof(*dp_connector),
+				    GFP_KERNEL);
+	if (!dp_connector)
+		return ERR_PTR(-ENOMEM);
+
+	dp_connector->dp_display = dp_display;
+
+	connector = &dp_connector->base;
+
+	ret = drm_connector_init(dp_display->drm_dev, connector, &dp_connector_funcs,
+			DRM_MODE_CONNECTOR_DisplayPort);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_connector_helper_add(connector, &dp_connector_helper_funcs);
+
+	/*
+	 * Enable HPD to let hpd event is handled when cable is attached to the host.
+	 */
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_attach_encoder(connector, dp_display->encoder);
+
+	return connector;
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
new file mode 100644
index 0000000..cf472c5
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DRM_H_
+#define _DP_DRM_H_
+
+#include <linux/types.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "msm_drv.h"
+#include "dp_display.h"
+
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display);
+
+#endif /* _DP_DRM_H_ */
+
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c b/drivers/gpu/drm/msm/dp/dp_extcon.c
new file mode 100644
index 0000000..0fb34ef
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/extcon.h>
+#include <drm/drmP.h>
+
+#include "dp_extcon.h"
+
+/* DP specific VDM commands */
+#define DP_USBPD_VDM_STATUS	0x10
+#define DP_USBPD_VDM_CONFIGURE	0x11
+
+/* USBPD-TypeC specific Macros */
+#define VDM_VERSION		0x0
+#define USB_C_DP_SID		0xFF01
+
+struct dp_extcon_private {
+	u32 vdo;
+	struct device *dev;
+	struct notifier_block extcon_nb;
+	struct extcon_dev *extcon;
+	struct workqueue_struct *extcon_wq;
+	struct work_struct event_work;
+	struct usbpd *pd;
+	struct dp_usbpd_cb *dp_cb;
+	struct dp_usbpd dp_usbpd;
+};
+
+static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
+{
+	int rc = 0;
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	dp_usbpd->hpd_high = hpd;
+
+	if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
+				&& !extcon_priv->dp_cb->disconnect) {
+		DRM_ERROR("extcon dp_cb not initialized\n");
+		return -EINVAL;
+	}
+	if (hpd)
+		extcon_priv->dp_cb->configure(extcon_priv->dev);
+	else
+		extcon_priv->dp_cb->disconnect(extcon_priv->dev);
+
+	return rc;
+}
+
+static void dp_extcon_event_work(struct work_struct *work)
+{
+	struct dp_extcon_private *extcon_priv;
+	int dp_state, ret;
+	union extcon_property_value property;
+
+	extcon_priv = container_of(work,
+			struct dp_extcon_private, event_work);
+
+	if (!extcon_priv || !extcon_priv->extcon) {
+		DRM_ERROR("Invalid extcon device handler\n");
+		return;
+	}
+
+	dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
+
+	if (dp_state > 0) {
+		ret = extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_TYPEC_POLARITY,
+					&property);
+		if (ret) {
+			DRM_ERROR("Get Polarity property failed\n");
+			return;
+		}
+		extcon_priv->dp_usbpd.orientation =
+			(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
+
+		extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_SS,
+					&property);
+		extcon_priv->dp_usbpd.multi_func =
+				((property.intval) ? true : false);
+
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
+		if (ret) {
+			DRM_ERROR("extcon_connect->true failed\n");
+			return;
+		}
+	} else {
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
+		if (ret) {
+			DRM_ERROR("extcon_connect->false failed\n");
+			return;
+		}
+	}
+}
+
+static int dp_extcon_event_notify(struct notifier_block *nb,
+				  unsigned long event, void *priv)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(nb, struct dp_extcon_private,
+						extcon_nb);
+
+	queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
+	return NOTIFY_DONE;
+}
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+	int ret = 0;
+
+	if (!dp_usbpd)
+		return -EINVAL;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
+	ret = devm_extcon_register_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+	if (ret) {
+		DRM_DEV_ERROR(extcon_priv->dev,
+			"register EXTCON_DISP_DP notifier err\n");
+		ret = -EINVAL;
+		return ret;
+	}
+
+	extcon_priv->extcon_wq = create_singlethread_workqueue("drm_dp_extcon");
+	if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
+		DRM_ERROR("Failed to create workqueue\n");
+		dp_extcon_unregister(dp_usbpd);
+		return -EPERM;
+	}
+
+	INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
+	return ret;
+}
+
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	if (!dp_usbpd) {
+		DRM_ERROR("Invalid input\n");
+		return;
+	}
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_extcon_unregister_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+
+	if (extcon_priv->extcon_wq)
+		destroy_workqueue(extcon_priv->extcon_wq);
+
+	return;
+}
+
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb)
+{
+	int rc = 0;
+	struct dp_extcon_private *dp_extcon;
+	struct dp_usbpd *dp_usbpd;
+
+	if (!cb) {
+		DRM_ERROR("invalid cb data\n");
+		rc = -EINVAL;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
+	if (!dp_extcon) {
+		rc = -ENOMEM;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (!dp_extcon->extcon) {
+		DRM_ERROR("invalid extcon data\n");
+		rc = -EINVAL;
+		devm_kfree(dev, dp_extcon);
+		return ERR_PTR(rc);
+        }
+
+	dp_extcon->dev = dev;
+	dp_extcon->dp_cb = cb;
+
+	dp_extcon->dp_usbpd.connect = dp_extcon_connect;
+	dp_usbpd = &dp_extcon->dp_usbpd;
+
+	return dp_usbpd;
+}
+
+void dp_extcon_put(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon;
+
+	if (!dp_usbpd)
+		return;
+
+	extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_kfree(extcon->dev, extcon);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h b/drivers/gpu/drm/msm/dp/dp_extcon.h
new file mode 100644
index 0000000..c6c3051
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_EXTCON_H_
+#define _DP_EXTCON_H_
+
+//#include <linux/usb/usbpd.h>
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+enum plug_orientation {
+	ORIENTATION_NONE,
+	ORIENTATION_CC1,
+	ORIENTATION_CC2,
+};
+
+/**
+ * struct dp_usbpd - DisplayPort status
+ *
+ * @orientation: plug orientation configuration
+ * @low_pow_st: low power state
+ * @adaptor_dp_en: adaptor functionality enabled
+ * @multi_func: multi-function preferred
+ * @usb_config_req: request to switch to usb
+ * @exit_dp_mode: request exit from displayport mode
+ * @hpd_high: Hot Plug Detect signal is high.
+ * @hpd_irq: Change in the status since last message
+ * @alt_mode_cfg_done: bool to specify alt mode status
+ * @debug_en: bool to specify debug mode
+ * @connect: simulate disconnect or connect for debug mode
+ */
+struct dp_usbpd {
+	enum plug_orientation orientation;
+	bool low_pow_st;
+	bool adaptor_dp_en;
+	bool multi_func;
+	bool usb_config_req;
+	bool exit_dp_mode;
+	bool hpd_high;
+	bool hpd_irq;
+	bool alt_mode_cfg_done;
+	bool debug_en;
+
+	int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
+};
+
+/**
+ * struct dp_usbpd_cb - callback functions provided by the client
+ *
+ * @configure: called by usbpd module when PD communication has
+ * been completed and the usb peripheral has been configured on
+ * dp mode.
+ * @disconnect: notify the cable disconnect issued by usb.
+ * @attention: notify any attention message issued by usb.
+ */
+struct dp_usbpd_cb {
+	int (*configure)(struct device *dev);
+	int (*disconnect)(struct device *dev);
+	int (*attention)(struct device *dev);
+};
+
+/**
+ * dp_extcon_get() - setup usbpd module
+ *
+ * @dev: device instance of the caller
+ * @cb: struct containing callback function pointers.
+ *
+ * This function allows the client to initialize the usbpd
+ * module. The module will communicate with usb driver and
+ * handles the power delivery (PD) communication with the
+ * sink/usb device. This module will notify the client using
+ * the callback functions about the connection and status.
+ */
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb);
+
+void dp_extcon_put(struct dp_usbpd *pd);
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd);
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
+
+#endif /* _DP_EXTCON_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
new file mode 100644
index 0000000..9f5b7bc8
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_link.h"
+#include "dp_panel.h"
+
+#define DP_TEST_REQUEST_MASK		0x7F
+
+enum audio_sample_rate {
+	AUDIO_SAMPLE_RATE_32_KHZ	= 0x00,
+	AUDIO_SAMPLE_RATE_44_1_KHZ	= 0x01,
+	AUDIO_SAMPLE_RATE_48_KHZ	= 0x02,
+	AUDIO_SAMPLE_RATE_88_2_KHZ	= 0x03,
+	AUDIO_SAMPLE_RATE_96_KHZ	= 0x04,
+	AUDIO_SAMPLE_RATE_176_4_KHZ	= 0x05,
+	AUDIO_SAMPLE_RATE_192_KHZ	= 0x06,
+};
+
+enum audio_pattern_type {
+	AUDIO_TEST_PATTERN_OPERATOR_DEFINED	= 0x00,
+	AUDIO_TEST_PATTERN_SAWTOOTH		= 0x01,
+};
+
+struct dp_link_request {
+	u32 test_requested;
+	u32 test_link_rate;
+	u32 test_lane_count;
+};
+
+struct dp_link_private {
+	u32 prev_sink_count;
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link dp_link;
+
+	struct dp_link_request request;
+	struct mutex test_response_mutex;
+	struct mutex psm_mutex;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+};
+
+static int dp_link_get_period(struct dp_link_private *link, int const addr)
+{
+	int ret = 0;
+	u8 data;
+	u32 const max_audio_period = 0xA;
+
+	/* TEST_AUDIO_PERIOD_CH_XX */
+	if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
+		DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Period - Bits 3:0 */
+	data = data & 0xF;
+	if ((int)data > max_audio_period) {
+		DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = data;
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_channel_period(struct dp_link_private *link)
+{
+	int ret = 0;
+	struct dp_link_test_audio *req = &link->dp_link.test_audio;
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_1 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_2 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
+
+	/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_3 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_4 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_5 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_6 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_7 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_8 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_pattern_type(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_pattern_type = 0x1;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_TEST_AUDIO_PATTERN_TYPE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Audio Pattern Type - Bits 7:0 */
+	if ((int)data > max_audio_pattern_type) {
+		DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_pattern_type = data;
+	DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_mode(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_sampling_rate = 0x6;
+	int const max_audio_channel_count = 0x8;
+	int sampling_rate = 0x0;
+	int channel_count = 0x0;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Sampling Rate - Bits 3:0 */
+	sampling_rate = data & 0xF;
+	if (sampling_rate > max_audio_sampling_rate) {
+		DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
+				sampling_rate, max_audio_sampling_rate);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Channel Count - Bits 7:4 */
+	channel_count = ((data & 0xF0) >> 4) + 1;
+	if (channel_count > max_audio_channel_count) {
+		DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
+				channel_count, max_audio_channel_count);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
+	link->dp_link.test_audio.test_audio_channel_count = channel_count;
+	DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
+					sampling_rate, channel_count);
+exit:
+	return ret;
+}
+
+/**
+ * dp_parse_audio_pattern_params() - parses audio pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the audio link pattern parameters.
+ */
+static int dp_link_parse_audio_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	ret = dp_link_parse_audio_mode(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_pattern_type(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_channel_period(link);
+
+exit:
+	return ret;
+}
+
+/**
+ * dp_link_is_video_pattern_valid() - validates the video pattern
+ * @pattern: video pattern requested by the sink
+ *
+ * Returns true if the requested video pattern is supported.
+ */
+static bool dp_link_is_video_pattern_valid(u32 pattern)
+{
+	switch (pattern) {
+	case DP_NO_TEST_PATTERN:
+	case DP_COLOR_RAMP:
+	case DP_BLACK_AND_WHITE_VERTICAL_LINES:
+	case DP_COLOR_SQUARE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * dp_link_is_bit_depth_valid() - validates the bit depth requested
+ * @bit_depth: bit depth requested by the sink
+ *
+ * Returns true if the requested bit depth is supported.
+ */
+static bool dp_link_is_bit_depth_valid(u32 tbd)
+{
+	/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+	case DP_TEST_BIT_DEPTH_8:
+	case DP_TEST_BIT_DEPTH_10:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int dp_link_parse_timing_params1(struct dp_link_private *link,
+					int addr, int len, u32 *val)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val = bp[1] | (bp[0] << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params2(struct dp_link_private *link,
+					int addr, int len,
+					u32 *val1, u32 *val2)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val1 = (bp[0] & BIT(7)) >> 7;
+	*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params3(struct dp_link_private *link,
+					int addr, u32 *val)
+{
+	u8 bp;
+	u32 len = 1;
+	int rlen;
+
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
+	if (rlen < 1) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+	*val = bp;
+
+	return 0;
+}
+
+/**
+ * dp_parse_video_pattern_params() - parses video pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the video link pattern and the link
+ * bit depth requested by the sink and, and if the values parsed are valid.
+ */
+static int dp_link_parse_video_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+	ssize_t rlen;
+	u8 bp;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!dp_link_is_video_pattern_valid(bp)) {
+		DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_video_pattern = bp;
+
+	/* Read the requested color bit depth and dynamic range (Byte 0x232) */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Dynamic Range */
+	link->dp_link.test_video.test_dyn_range = (bp & DP_TEST_DYNAMIC_RANGE_CEA);
+
+	/* Color bit depth */
+	bp &= DP_TEST_BIT_DEPTH_MASK;
+	if (!dp_link_is_bit_depth_valid(bp)) {
+		DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_bit_depth = bp;
+
+	/* resolution timing params */
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_h_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_v_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
+			&link->dp_link.test_video.test_h_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
+			&link->dp_link.test_video.test_v_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
+			&link->dp_link.test_video.test_hsync_pol,
+			&link->dp_link.test_video.test_hsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
+			&link->dp_link.test_video.test_vsync_pol,
+			&link->dp_link.test_video.test_vsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
+			&link->dp_link.test_video.test_h_width);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
+			&link->dp_link.test_video.test_v_height);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
+		&link->dp_link.test_video.test_rr_d);
+	link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR,
+		&link->dp_link.test_video.test_rr_n);
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_n (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
+		return ret;
+	}
+
+	DRM_DEBUG_DP("link video pattern = 0x%x\n" \
+		"link dynamic range = 0x%x\n" \
+		"link bit depth = 0x%x\n" \
+		"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
+		"TEST_H_START = %d, TEST_V_START = %d\n" \
+		"TEST_HSYNC_POL = %d\n" \
+		"TEST_HSYNC_WIDTH = %d\n" \
+		"TEST_VSYNC_POL = %d\n" \
+		"TEST_VSYNC_WIDTH = %d\n" \
+		"TEST_H_WIDTH = %d\n" \
+		"TEST_V_HEIGHT = %d\n" \
+		"TEST_REFRESH_DENOMINATOR = %d\n" \
+		 "TEST_REFRESH_NUMERATOR = %d\n",
+		link->dp_link.test_video.test_video_pattern,
+		link->dp_link.test_video.test_dyn_range,
+		link->dp_link.test_video.test_bit_depth,
+		link->dp_link.test_video.test_h_total,
+		link->dp_link.test_video.test_v_total,
+		link->dp_link.test_video.test_h_start,
+		link->dp_link.test_video.test_v_start,
+		link->dp_link.test_video.test_hsync_pol,
+		link->dp_link.test_video.test_hsync_width,
+		link->dp_link.test_video.test_vsync_pol,
+		link->dp_link.test_video.test_vsync_width,
+		link->dp_link.test_video.test_h_width,
+		link->dp_link.test_video.test_v_height,
+		link->dp_link.test_video.test_rr_d,
+		link->dp_link.test_video.test_rr_n);
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_link_training_params() - parses link training parameters from
+ * DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane
+ * count (Byte 0x220), and if these values parse are valid.
+ */
+static int dp_link_parse_link_training_params(struct dp_link_private *link)
+{
+	u8 bp;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,	&bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!is_link_rate_valid(bp)) {
+		DRM_ERROR("invalid link rate = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_link_rate = bp;
+	DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
+		return rlen;
+	}
+	bp &= DP_MAX_LANE_COUNT_MASK;
+
+	if (!is_lane_count_valid(bp)) {
+		DRM_ERROR("invalid lane count = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_lane_count = bp;
+	DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
+	return 0;
+}
+
+/**
+ * dp_parse_phy_test_params() - parses the phy link parameters
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being
+ * requested.
+ */
+static int dp_link_parse_phy_test_params(struct dp_link_private *link)
+{
+	u8 data;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	link->dp_link.phy_params.phy_test_pattern_sel = data;
+
+	DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
+
+	switch (data) {
+	case DP_LINK_QUAL_PATTERN_DISABLE:
+	case DP_LINK_QUAL_PATTERN_D10_2:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * dp_link_is_video_audio_test_requested() - checks for audio/video link request
+ * @link: link requested by the sink
+ *
+ * Returns true if the requested link is a permitted audio/video link.
+ */
+static bool dp_link_is_video_audio_test_requested(u32 link)
+{
+	u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
+				DP_TEST_LINK_AUDIO_PATTERN |
+				DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+
+	return ((link & video_audio_test) &&
+		!(link & ~video_audio_test));
+}
+
+/**
+ * dp_link_parse_request() - parses link request parameters from sink
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD to check if an automated link is requested (Byte 0x201),
+ * and what type of link automation is being requested (Byte 0x218).
+ */
+static int dp_link_parse_request(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+
+	/**
+	 * Read the device service IRQ vector (Byte 0x201) to determine
+	 * whether an automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
+
+	if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
+		DRM_DEBUG_DP("no test requested\n");
+		return 0;
+	}
+
+	/**
+	 * Read the link request byte (Byte 0x218) to determine what type
+	 * of automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
+		DRM_DEBUG_DP("link 0x%x not supported\n", data);
+		goto end;
+	}
+
+	DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
+	link->request.test_requested = data;
+
+	if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
+		ret = dp_link_parse_phy_test_params(link);
+		if (ret)
+			goto end;
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (dp_link_is_video_audio_test_requested(
+			link->request.test_requested)) {
+		ret = dp_link_parse_video_pattern_params(link);
+		if (ret)
+			goto end;
+
+		ret = dp_link_parse_audio_pattern_params(link);
+	}
+end:
+	/*
+	 * Send a DP_TEST_ACK if all link parameters are valid, otherwise send
+	 * a DP_TEST_NAK.
+	 */
+	if (ret) {
+		link->dp_link.test_response = DP_TEST_NAK;
+	} else {
+		if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
+			link->dp_link.test_response = DP_TEST_ACK;
+		else
+			link->dp_link.test_response =
+				DP_TEST_EDID_CHECKSUM_WRITE;
+	}
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_sink_count() - parses the sink count
+ *
+ * Parses the DPCD to check if there is an update to the sink count
+ * (Byte 0x200), and whether all the sink devices connected have Content
+ * Protection enabled.
+ */
+static int dp_link_parse_sink_count(struct dp_link *dp_link)
+{
+	ssize_t rlen;
+	bool cp_ready;
+
+	struct dp_link_private *link = container_of(dp_link,
+			struct dp_link_private, dp_link);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
+				 &link->dp_link.sink_count);
+	if (rlen < 0) {
+		DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
+
+	link->dp_link.sink_count =
+		DP_GET_SINK_COUNT(link->dp_link.sink_count);
+
+	DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
+		link->dp_link.sink_count, cp_ready);
+	return 0;
+}
+
+static void dp_link_parse_sink_status_field(struct dp_link_private *link)
+{
+	int len = 0;
+
+	link->prev_sink_count = link->dp_link.sink_count;
+	dp_link_parse_sink_count(&link->dp_link);
+
+	len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
+		link->link_status);
+	if (len < DP_LINK_STATUS_SIZE)
+		DRM_ERROR("DP link status read failed\n");
+	dp_link_parse_request(link);
+}
+
+/**
+ * dp_link_process_link_training_request() - processes new training requests
+ * @link: Display Port link data
+ *
+ * This function will handle new link training requests that are initiated by
+ * the sink. In particular, it will update the requested lane count and link
+ * link rate, and then trigger the link retraining procedure.
+ *
+ * The function will return 0 if a link training request has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_training_request(struct dp_link_private *link)
+{
+	if (link->request.test_requested != DP_TEST_LINK_TRAINING)
+		return -EINVAL;
+
+	DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
+			DP_TEST_LINK_TRAINING,
+			link->request.test_link_rate,
+			link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	return 0;
+}
+
+bool dp_link_send_test_response(struct dp_link *dp_link)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
+			dp_link->test_response);
+	mutex_unlock(&link->test_response_mutex);
+
+	return ret == 1;
+}
+
+int dp_link_psm_config(struct dp_link *dp_link,
+			      struct drm_dp_link *link_info, bool enable)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->psm_mutex);
+	if (enable)
+		ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
+	else
+		ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
+
+	if (ret)
+		DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" : "exit");
+	else
+		dp_link->psm_enabled = enable;
+
+	mutex_unlock(&link->psm_mutex);
+	return ret;
+}
+
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM, checksum);
+	return ret == 1;
+}
+
+static int dp_link_parse_vx_px(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_voltage(link->link_status, 0),
+		drm_dp_get_adjust_request_voltage(link->link_status, 1),
+		drm_dp_get_adjust_request_voltage(link->link_status, 2),
+		drm_dp_get_adjust_request_voltage(link->link_status, 3));
+
+	DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
+
+	/**
+	 * Update the voltage and pre-emphasis levels as per DPCD request
+	 * vector.
+	 */
+	DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+	link->dp_link.phy_params.v_level =
+		drm_dp_get_adjust_request_voltage(link->link_status, 0);
+	link->dp_link.phy_params.p_level =
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
+	DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+
+	return ret;
+}
+
+/**
+ * dp_link_process_phy_test_pattern_request() - process new phy link requests
+ * @link: Display Port Driver data
+ *
+ * This function will handle new phy link pattern requests that are initiated
+ * by the sink. The function will return 0 if a phy link pattern has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_phy_test_pattern_request(
+		struct dp_link_private *link)
+{
+	int ret = 0;
+
+	if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) {
+		DRM_DEBUG_DP("no phy test\n");
+		return -EINVAL;
+	}
+
+	if (!is_link_rate_valid(link->request.test_link_rate) ||
+		!is_lane_count_valid(link->request.test_lane_count)) {
+		DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+		return -EINVAL;
+	}
+
+	DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
+			link->dp_link.link_params.rate,
+			link->dp_link.link_params.num_lanes);
+
+	DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	ret = dp_link_parse_vx_px(link);
+	if (ret)
+		  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
+
+	return ret;
+}
+
+static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+/**
+ * dp_link_process_link_status_update() - processes link status updates
+ * @link: Display Port link module data
+ *
+ * This function will check for changes in the link status, e.g. clock
+ * recovery done on all lanes, and trigger link training if there is a
+ * failure/error on the link.
+ *
+ * The function will return 0 if the a link status update has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_status_update(struct dp_link_private *link)
+{
+	if (!(get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+							DP_LINK_STATUS_UPDATED) ||
+			(drm_dp_clock_recovery_ok(link->link_status,
+					link->dp_link.link_params.num_lanes) &&
+			drm_dp_channel_eq_ok(link->link_status,
+					link->dp_link.link_params.num_lanes)))
+		return -EINVAL;
+
+	DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes),
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes));
+
+	return 0;
+}
+
+/**
+ * dp_link_process_downstream_port_status_change() - process port status changes
+ * @link: Display Port Driver data
+ *
+ * This function will handle downstream port updates that are initiated by
+ * the sink. If the downstream port status has changed, the EDID is read via
+ * AUX.
+ *
+ * The function will return 0 if a downstream port update has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_ds_port_status_change(struct dp_link_private *link)
+{
+	if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+					DP_DOWNSTREAM_PORT_STATUS_CHANGED)
+		goto reset;
+
+	if (link->prev_sink_count == link->dp_link.sink_count)
+		return -EINVAL;
+
+reset:
+	/* reset prev_sink_count */
+	link->prev_sink_count = link->dp_link.sink_count;
+
+	return 0;
+}
+
+static bool dp_link_is_video_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
+		&& !(link->request.test_requested &
+		DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+}
+
+static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
+}
+
+static void dp_link_reset_data(struct dp_link_private *link)
+{
+	link->request = (const struct dp_link_request){ 0 };
+	link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
+	link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
+	link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
+	link->dp_link.phy_params.phy_test_pattern_sel = 0;
+	link->dp_link.sink_request = 0;
+	link->dp_link.test_response = 0;
+}
+
+/**
+ * dp_link_process_request() - handle HPD IRQ transition to HIGH
+ * @link: pointer to link module data
+ *
+ * This function will handle the HPD IRQ state transitions from LOW to HIGH
+ * (including cases when there are back to back HPD IRQ HIGH) indicating
+ * the start of a new link training request or sink status update.
+ */
+int dp_link_process_request(struct dp_link *dp_link)
+{
+	int ret = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	dp_link_reset_data(link);
+
+	dp_link_parse_sink_status_field(link);
+	mutex_unlock(&link->test_response_mutex);
+
+	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
+		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
+		return ret;
+	}
+
+	ret = dp_link_process_ds_port_status_change(link);
+	if (!ret) {
+		dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
+		return ret;
+	}
+
+	ret = dp_link_process_link_training_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_TRAINING;
+		return ret;
+	}
+
+	ret = dp_link_process_phy_test_pattern_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
+		return ret;
+	}
+
+	ret = dp_link_process_link_status_update(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
+		return ret;
+	}
+
+	if (dp_link_is_video_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
+		return -EINVAL;
+	}
+
+	if (dp_link_is_audio_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+int dp_link_get_colorimetry_config(struct dp_link *dp_link)
+{
+	u32 cc;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/*
+	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
+	 * Only RGB_VESA and RGB_CEA supported for now
+	 */
+	if (dp_link_is_video_pattern_requested(link))
+		cc = link->dp_link.test_video.test_dyn_range;
+	else
+		cc = DP_TEST_DYNAMIC_RANGE_VESA;
+
+	return cc;
+}
+
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
+{
+	int i;
+	int v_max = 0, p_max = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/* use the max level across lanes */
+	for (i = 0; i < dp_link->link_params.num_lanes; i++) {
+		u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
+		u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+		DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
+							i, data_v, data_p);
+		if (v_max < data_v)
+			v_max = data_v;
+		if (p_max < data_p)
+			p_max = data_p;
+	}
+
+	dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+	dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	/**
+	 * Adjust the voltage swing and pre-emphasis level combination to within
+	 * the allowable range.
+	 */
+	if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
+			dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
+		dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
+	}
+
+	if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
+	}
+
+	if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
+		&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level,
+			DP_TRAIN_PRE_EMPHASIS_LVL_1);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
+	}
+
+	DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
+		dp_link->phy_params.v_level, dp_link->phy_params.p_level);
+
+	return 0;
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
+{
+	u32 tbd;
+
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Test bit depth is bit depth per color component
+	 *    2. Assume 3 color components
+	 */
+	switch (bpp) {
+	case 18:
+		tbd = DP_TEST_BIT_DEPTH_6;
+		break;
+	case 24:
+		tbd = DP_TEST_BIT_DEPTH_8;
+		break;
+	case 30:
+		tbd = DP_TEST_BIT_DEPTH_10;
+		break;
+	default:
+		tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
+		break;
+	}
+
+	if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
+		tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
+
+	return tbd;
+}
+
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
+{
+	int rc = 0;
+	struct dp_link_private *link;
+	struct dp_link *dp_link;
+
+	if (!dev || !aux) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
+	if (!link) {
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link->dev   = dev;
+	link->aux   = aux;
+
+	mutex_init(&link->test_response_mutex);
+	mutex_init(&link->psm_mutex);
+	dp_link = &link->dp_link;
+
+	return dp_link;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_link_put(struct dp_link *dp_link)
+{
+	struct dp_link_private *link;
+
+	if (!dp_link)
+		return;
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	devm_kfree(link->dev, link);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
new file mode 100644
index 0000000..607904b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_LINK_H_
+#define _DP_LINK_H_
+
+#include "dp_aux.h"
+
+#define DS_PORT_STATUS_CHANGED 0x200
+#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
+
+enum dp_link_voltage_level {
+	DP_TRAIN_VOLTAGE_SWING_LVL_0	= 0,
+	DP_TRAIN_VOLTAGE_SWING_LVL_1	= 1,
+	DP_TRAIN_VOLTAGE_SWING_LVL_2	= 2,
+	DP_TRAIN_VOLTAGE_SWING_MAX	= DP_TRAIN_VOLTAGE_SWING_LVL_2,
+};
+
+enum dp_link_preemaphasis_level {
+	DP_TRAIN_PRE_EMPHASIS_LVL_0	= 0,
+	DP_TRAIN_PRE_EMPHASIS_LVL_1	= 1,
+	DP_TRAIN_PRE_EMPHASIS_LVL_2	= 2,
+	DP_TRAIN_PRE_EMPHASIS_MAX	= DP_TRAIN_PRE_EMPHASIS_LVL_2,
+};
+
+struct dp_link_test_video {
+	u32 test_video_pattern;
+	u32 test_bit_depth;
+	u32 test_dyn_range;
+	u32 test_h_total;
+	u32 test_v_total;
+	u32 test_h_start;
+	u32 test_v_start;
+	u32 test_hsync_pol;
+	u32 test_hsync_width;
+	u32 test_vsync_pol;
+	u32 test_vsync_width;
+	u32 test_h_width;
+	u32 test_v_height;
+	u32 test_rr_d;
+	u32 test_rr_n;
+};
+
+struct dp_link_test_audio {
+	u32 test_audio_sampling_rate;
+	u32 test_audio_channel_count;
+	u32 test_audio_pattern_type;
+	u32 test_audio_period_ch_1;
+	u32 test_audio_period_ch_2;
+	u32 test_audio_period_ch_3;
+	u32 test_audio_period_ch_4;
+	u32 test_audio_period_ch_5;
+	u32 test_audio_period_ch_6;
+	u32 test_audio_period_ch_7;
+	u32 test_audio_period_ch_8;
+};
+
+struct dp_link_phy_params {
+	u32 phy_test_pattern_sel;
+	u8 v_level;
+	u8 p_level;
+};
+
+struct dp_link {
+	u32 sink_request;
+	u32 test_response;
+	bool psm_enabled;
+
+	u8 sink_count;
+	struct dp_link_test_video test_video;
+	struct dp_link_test_audio test_audio;
+	struct dp_link_phy_params phy_params;
+	struct drm_dp_link link_params;
+};
+
+/**
+ * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
+ * @tbd: test bit depth
+ *
+ * Returns the bits per pixel (bpp) to be used corresponding to the
+ * git bit depth value. This function assumes that bit depth has
+ * already been validated.
+ */
+static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
+{
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Bit depth is per color component
+	 *    2. If bit depth is unknown return 0
+	 *    3. Assume 3 color components
+	 */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+		return 18;
+	case DP_TEST_BIT_DEPTH_8:
+		return 24;
+	case DP_TEST_BIT_DEPTH_10:
+		return 30;
+	case DP_TEST_BIT_DEPTH_UNKNOWN:
+	default:
+		return 0;
+	}
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
+int dp_link_process_request(struct dp_link *dp_link);
+int dp_link_get_colorimetry_config(struct dp_link *dp_link);
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
+bool dp_link_send_test_response(struct dp_link *dp_link);
+int dp_link_psm_config(struct dp_link *dp_link,
+		struct drm_dp_link *link_info, bool enable);
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum);
+
+/**
+ * dp_link_get() - get the functionalities of dp test module
+ *
+ *
+ * return: a pointer to dp_link struct
+ */
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
+
+/**
+ * dp_link_put() - releases the dp test module's resources
+ *
+ * @dp_link: an instance of dp_link module
+ *
+ */
+void dp_link_put(struct dp_link *dp_link);
+
+#endif /* _DP_LINK_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
new file mode 100644
index 0000000..a3150f4
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_panel.h"
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+
+#define DP_MAX_DS_PORT_COUNT 1
+
+struct dp_panel_private {
+	struct device *dev;
+	struct dp_panel dp_panel;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+	bool panel_on;
+	bool aux_cfg_update_done;
+};
+
+static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	size_t rlen;
+	struct dp_panel_private *panel;
+	struct drm_dp_link *link_info;
+	u8 *dpcd, major = 0, minor = 0;
+	u32 dfp_count = 0;
+
+	dpcd = dp_panel->dpcd;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	link_info = &dp_panel->link_info;
+	rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
+	if (rc < 0) {
+		DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
+		return rc;
+	}
+	major = (link_info->revision >> 4) & 0x0f;
+	minor = link_info->revision & 0x0f;
+	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
+	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
+	DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
+
+	rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
+		dpcd, (DP_RECEIVER_CAP_SIZE + 1));
+	if (rlen < 0) {
+		DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
+		return -EINVAL;
+	}
+
+	dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
+						DP_DOWN_STREAM_PORT_COUNT;
+	if (dfp_count > DP_MAX_DS_PORT_COUNT) {
+		DRM_ERROR("DS port count %d greater that max (%d) supported\n",
+			dfp_count, DP_MAX_DS_PORT_COUNT);
+		return -EINVAL;
+	}
+	return rc;
+}
+
+static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct drm_dp_link *link_info;
+	const u32 max_supported_bpp = 30, min_supported_bpp = 18;
+	u32 bpp = 0, data_rate_khz = 0;
+
+	bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
+
+	link_info = &dp_panel->link_info;
+	data_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	while (bpp > min_supported_bpp) {
+		if (mode_pclk_khz * bpp <= data_rate_khz)
+			break;
+		bpp -= 6;
+	}
+
+	return bpp;
+}
+
+static void dp_panel_set_test_mode(struct dp_panel_private *panel,
+		struct dp_display_mode *mode)
+{
+	struct drm_display_mode *drm_mode = NULL;
+	struct dp_link_test_video *test_info = NULL;
+
+	drm_mode = &mode->drm_mode;
+	test_info = &panel->link->test_video;
+
+	drm_mode->hdisplay = test_info->test_h_width;
+	drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total -
+			(test_info->test_h_start + test_info->test_h_width);
+	drm_mode->hsync_end = drm_mode->hsync_start + test_info->test_hsync_width;
+	drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
+						test_info->test_hsync_width;
+
+	drm_mode->vdisplay = test_info->test_v_height;
+	drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total -
+			(test_info->test_v_start + test_info->test_v_height);
+	drm_mode->vsync_end = drm_mode->vsync_start + test_info->test_vsync_width;
+	drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
+						test_info->test_vsync_width;
+
+	drm_mode->vrefresh = test_info->test_rr_n;
+	drm_mode->clock = test_info->test_h_total *
+		test_info->test_v_total * drm_mode->vrefresh;
+
+	drm_mode->type = 0x48;
+	drm_mode_set_name(drm_mode);
+
+	if (test_info->test_rr_d == 0)
+		drm_mode->clock /= 1000;
+	else
+		drm_mode->clock /= 1001;
+
+	if (test_info->test_h_width == 640)
+		drm_mode->clock = 25170;
+}
+
+static int dp_panel_update_modes(struct drm_connector *connector,
+	struct edid *edid)
+{
+	int rc = 0;
+
+	if (edid) {
+		rc = drm_connector_update_edid_property(connector, edid);
+		if (rc) {
+			DRM_ERROR("failed to update edid property %d\n", rc);
+			return rc;
+		}
+		rc = drm_add_edid_modes(connector, edid);
+		DRM_DEBUG_DP("%s -", __func__);
+		return rc;
+	}
+
+	rc = drm_connector_update_edid_property(connector, NULL);
+	if (rc)
+		DRM_ERROR("failed to update edid property %d\n", rc);
+
+	return rc;
+}
+
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+	struct drm_connector *connector)
+{
+	int rc = 0, bw_code;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel || !connector) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	rc = dp_panel_read_dpcd(dp_panel);
+	bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+	if (rc || !is_link_rate_valid(bw_code) ||
+			!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+			(bw_code > dp_panel->max_bw_code)) {
+		DRM_ERROR("read dpcd failed %d\n", rc);
+		return rc;
+	}
+	rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
+			      drm_dp_is_branch(dp_panel->dpcd));
+	if (rc) {
+		DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
+		return rc;
+	}
+
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = drm_get_edid(connector,
+					      &panel->aux->drm_aux->ddc);
+	if (!dp_panel->edid) {
+		DRM_ERROR("panel edid read failed\n");
+		return -EINVAL;
+	}
+
+	if (panel->aux_cfg_update_done) {
+		DRM_DEBUG_DP("read DPCD with updated AUX config\n");
+		rc = dp_panel_read_dpcd(dp_panel);
+		bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+		if (rc || !is_link_rate_valid(bw_code) ||
+				!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+				(bw_code > dp_panel->max_bw_code)) {
+			DRM_ERROR("read dpcd failed %d\n", rc);
+			return rc;
+		}
+		panel->aux_cfg_update_done = false;
+	}
+
+	return 0;
+}
+
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct dp_panel_private *panel;
+	u32 bpp = mode_edid_bpp;
+
+	if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
+		DRM_ERROR("invalid input\n");
+		return 0;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test)
+		bpp = dp_link_bit_depth_to_bpp(
+				panel->link->test_video.test_bit_depth);
+	else
+		bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
+				mode_pclk_khz);
+
+	return bpp;
+}
+
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+	struct drm_connector *connector, struct dp_display_mode *mode)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test) {
+		dp_panel_set_test_mode(panel, mode);
+		return 1;
+	} else if (dp_panel->edid) {
+		return dp_panel_update_modes(connector, dp_panel->edid);
+	}
+
+	return 0;
+}
+
+u8 dp_panel_get_edid_checksum(struct edid *edid)
+{
+	struct edid *last_block;
+	u8 *raw_edid;
+	bool is_edid_corrupt;
+
+	if (!edid) {
+		DRM_ERROR("invalid edid input\n");
+		return 0;
+	}
+
+	raw_edid = (u8 *)edid;
+	raw_edid += (edid->extensions * EDID_LENGTH);
+	last_block = (struct edid *)raw_edid;
+
+	/* block type extension */
+	drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
+	if (!is_edid_corrupt)
+		return last_block->checksum;
+
+	DRM_ERROR("Invalid block, no checksum\n");
+	return 0;
+}
+
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
+		u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
+
+		dp_link_send_edid_checksum(panel->link, checksum);
+		dp_link_send_test_response(panel->link);
+	}
+}
+
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
+{
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+
+	if (!panel->panel_on) {
+		DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
+		return;
+	}
+
+	if (!enable) {
+		dp_catalog_panel_tpg_disable(catalog);
+		return;
+	}
+
+	DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
+	dp_catalog_panel_tpg_enable(catalog, &panel->dp_panel.dp_mode.drm_mode);
+}
+
+int dp_panel_timing_cfg(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	u32 data, total_ver, total_hor;
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+	struct drm_display_mode *drm_mode;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+	drm_mode = &panel->dp_panel.dp_mode.drm_mode;
+
+	DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
+		drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
+		drm_mode->hsync_start - drm_mode->hdisplay,
+		drm_mode->hsync_end - drm_mode->hsync_start);
+
+	DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
+		drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
+		drm_mode->vsync_start - drm_mode->vdisplay,
+		drm_mode->vsync_end - drm_mode->vsync_start);
+
+	total_hor = drm_mode->htotal;
+
+	total_ver = drm_mode->vtotal;
+
+	data = total_ver;
+	data <<= 16;
+	data |= total_hor;
+
+	catalog->total = data;
+
+	data = (drm_mode->vtotal - drm_mode->vsync_start);
+	data <<= 16;
+	data |= (drm_mode->htotal - drm_mode->hsync_start);
+
+	catalog->sync_start = data;
+
+	data = drm_mode->vsync_end - drm_mode->vsync_start;
+	data <<= 16;
+	data |= (panel->dp_panel.dp_mode.v_active_low << 31);
+	data |= drm_mode->hsync_end - drm_mode->hsync_start;
+	data |= (panel->dp_panel.dp_mode.h_active_low << 15);
+
+	catalog->width_blanking = data;
+
+	data = drm_mode->vdisplay;
+	data <<= 16;
+	data |= drm_mode->hdisplay;
+
+	catalog->dp_active = data;
+
+	dp_catalog_panel_timing_cfg(catalog);
+	panel->panel_on = true;
+
+	return rc;
+}
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &dp_panel->dp_mode.drm_mode;
+
+	/*
+	 * print resolution info as this is a result
+	 * of user initiated action of cable connection
+	 */
+	DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
+	DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
+		drm_mode->vdisplay, drm_mode->vrefresh);
+	DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->htotal - drm_mode->hsync_end,
+			drm_mode->hsync_start - drm_mode->hdisplay,
+			drm_mode->hsync_end - drm_mode->hsync_start);
+	DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->vtotal - drm_mode->vsync_end,
+			drm_mode->vsync_start - drm_mode->vdisplay,
+			drm_mode->vsync_end - drm_mode->vsync_start);
+	DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
+	DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32, dp_panel->dp_mode.bpp, 30));
+	DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	return rc;
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in)
+{
+	int rc = 0;
+	struct dp_panel_private *panel;
+	struct dp_panel *dp_panel;
+
+	if (!in->dev || !in->catalog || !in->aux || !in->link) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
+	if (!panel) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	panel->dev = in->dev;
+	panel->aux = in->aux;
+	panel->catalog = in->catalog;
+	panel->link = in->link;
+
+	dp_panel = &panel->dp_panel;
+	dp_panel->max_bw_code = DP_LINK_BW_8_1;
+	panel->aux_cfg_update_done = false;
+
+	return dp_panel;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_panel_put(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel)
+		return;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = NULL;
+	devm_kfree(panel->dev, panel);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
new file mode 100644
index 0000000..68c5650
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PANEL_H_
+#define _DP_PANEL_H_
+
+#include <drm/msm_drm.h>
+
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_extcon.h"
+
+struct edid;
+
+#define DP_MAX_DOWNSTREAM_PORTS 0x10
+
+struct dp_display_mode {
+	struct drm_display_mode drm_mode;
+	u32 capabilities;
+	u32 bpp;
+	u32 h_active_low;
+	u32 v_active_low;
+};
+
+struct dp_panel_in {
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+};
+
+struct dp_panel {
+	/* dpcd raw data */
+	u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
+
+	struct drm_dp_link link_info;
+	struct drm_dp_desc desc;
+	struct edid *edid;
+	struct drm_connector *connector;
+	struct dp_display_mode dp_mode;
+	bool video_test;
+
+	u32 vic;
+	u32 max_pclk_khz;
+
+	u32 max_bw_code;
+};
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel);
+int dp_panel_deinit(struct dp_panel *dp_panel);
+int dp_panel_timing_cfg(struct dp_panel *dp_panel);
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+		struct drm_connector *connector);
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 mode_max_bpp,
+			u32 mode_pclk_khz);
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+		struct drm_connector *connector, struct dp_display_mode *mode);
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
+
+/**
+ * is_link_rate_valid() - validates the link rate
+ * @lane_rate: link rate requested by the sink
+ *
+ * Returns true if the requested link rate is supported.
+ */
+static inline bool is_link_rate_valid(u32 bw_code)
+{
+	return (bw_code == DP_LINK_BW_1_62 ||
+		bw_code == DP_LINK_BW_2_7 ||
+		bw_code == DP_LINK_BW_5_4 ||
+		bw_code == DP_LINK_BW_8_1);
+}
+
+/**
+ * dp_link_is_lane_count_valid() - validates the lane count
+ * @lane_count: lane count requested by the sink
+ *
+ * Returns true if the requested lane count is supported.
+ */
+static inline bool is_lane_count_valid(u32 lane_count)
+{
+	return (lane_count == 1 ||
+		lane_count == 2 ||
+		lane_count == 4);
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in);
+void dp_panel_put(struct dp_panel *dp_panel);
+#endif /* _DP_PANEL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
new file mode 100644
index 0000000..3fa2a1f
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/of_gpio.h>
+
+#include "dp_parser.h"
+
+static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
+	.num = 2,
+	.regs = {
+		{"vdda-1p2", 21800, 4 },	/* 1.2 V */
+		{"vdda-0p9", 36000, 32 },	/* 0.9 V */
+	},
+};
+
+static int msm_dss_ioremap_byname(struct platform_device *pdev,
+			   struct dss_io_data *io_data, const char *name)
+{
+	struct resource *res = NULL;
+
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!res) {
+		DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -ENODEV;
+	}
+
+	io_data->len = (u32)resource_size(res);
+	io_data->base = ioremap(res->start, io_data->len);
+	if (!io_data->base) {
+		DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void msm_dss_iounmap(struct dss_io_data *io_data)
+{
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return;
+	}
+
+	if (io_data->base) {
+		iounmap(io_data->base);
+		io_data->base = NULL;
+	}
+	io_data->len = 0;
+}
+
+static void dp_parser_unmap_io_resources(struct dp_parser *parser)
+{
+	struct dp_io *io = &parser->io;
+
+	msm_dss_iounmap(&io->dp_ahb);
+	msm_dss_iounmap(&io->dp_aux);
+	msm_dss_iounmap(&io->dp_link);
+	msm_dss_iounmap(&io->dp_p0);
+	msm_dss_iounmap(&io->phy_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->dp_pll_io);
+	msm_dss_iounmap(&io->dp_cc_io);
+	msm_dss_iounmap(&io->usb3_dp_com);
+	msm_dss_iounmap(&io->qfprom_io);
+}
+
+static int dp_parser_ctrl_res(struct dp_parser *parser)
+{
+	int rc = 0;
+	u32 index;
+	struct platform_device *pdev = parser->pdev;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	struct dp_io *io = &parser->io;
+
+	rc = of_property_read_u32(of_node, "cell-index", &index);
+	if (rc) {
+		DRM_ERROR("cell-index not specified, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
+	if (rc) {
+		DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
+	if (rc) {
+		DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
+	if (rc) {
+		DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
+	if (rc) {
+		DRM_ERROR("unable to remap dp MMSS_CC resources\n");
+		goto err;
+	}
+
+	if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
+		pr_warn("unable to remap dp qfprom resources\n");
+
+	return 0;
+err:
+	dp_parser_unmap_io_resources(parser);
+	return rc;
+}
+
+static const char *dp_get_phy_aux_config_property(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return "qcom,aux-cfg0-settings";
+	case PHY_AUX_CFG1:
+		return "qcom,aux-cfg1-settings";
+	case PHY_AUX_CFG2:
+		return "qcom,aux-cfg2-settings";
+	case PHY_AUX_CFG3:
+		return "qcom,aux-cfg3-settings";
+	case PHY_AUX_CFG4:
+		return "qcom,aux-cfg4-settings";
+	case PHY_AUX_CFG5:
+		return "qcom,aux-cfg5-settings";
+	case PHY_AUX_CFG6:
+		return "qcom,aux-cfg6-settings";
+	case PHY_AUX_CFG7:
+		return "qcom,aux-cfg7-settings";
+	case PHY_AUX_CFG8:
+		return "qcom,aux-cfg8-settings";
+	case PHY_AUX_CFG9:
+		return "qcom,aux-cfg9-settings";
+	default:
+		return "unknown";
+	}
+}
+
+static int dp_parser_aux(struct dp_parser *parser)
+{
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	int len = 0, i = 0, j = 0, config_count = 0;
+	const char *data;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		const char *property = dp_get_phy_aux_config_property(i);
+
+		data = of_get_property(of_node, property, &len);
+		if (!data) {
+			DRM_ERROR("Unable to read %s\n", property);
+			goto error;
+		}
+
+		config_count = len - 1;
+		if (config_count < 1 || /* minimum config count = 1 */
+			config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
+			DRM_ERROR("Invalid config count (%d) configs for %s\n",
+					config_count, property);
+			goto error;
+		}
+
+		parser->aux_cfg[i].offset = data[0];
+		parser->aux_cfg[i].cfg_cnt = config_count;
+		DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
+				property,
+				parser->aux_cfg[i].offset,
+				parser->aux_cfg[i].cfg_cnt);
+		for (j = 1; j < len; j++) {
+			parser->aux_cfg[i].lut[j - 1] = data[j];
+			DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
+					property,
+					i,
+					parser->aux_cfg[i].lut[j - 1]);
+		}
+	}
+		return 0;
+
+error:
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
+	}
+	return -EINVAL;
+}
+
+static int dp_parser_misc(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+
+	rc = of_property_read_u32(of_node,
+		"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
+	if (rc)
+		parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
+
+	return 0;
+}
+
+static int dp_parser_pinctrl(struct dp_parser *parser)
+{
+	struct dp_pinctrl *pinctrl = &parser->pinctrl;
+
+	pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
+
+	if (IS_ERR_OR_NULL(pinctrl->pin)) {
+		DRM_ERROR("failed to get pinctrl, rc=%d\n",
+					PTR_ERR_OR_ZERO(pinctrl->pin));
+		return -EINVAL;
+	}
+
+	pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_active");
+	if (IS_ERR_OR_NULL(pinctrl->state_active)) {
+		DRM_ERROR("failed to get pinctrl active state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_active));
+		return -EINVAL;
+	}
+
+	pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_sleep");
+	if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
+		DRM_ERROR("failed to get pinctrl suspend state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_suspend));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_gpio(struct dp_parser *parser)
+{
+	struct device *dev = &parser->pdev->dev;
+	struct device_node *of_node = dev->of_node;
+
+	parser->usbplug_cc_gpio = of_get_named_gpio(of_node, "qcom,usbplug-cc-gpio", 0);
+	if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
+			DRM_ERROR("usbplug-cc-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio", 0);
+	if (!gpio_is_valid(parser->aux_en_gpio)) {
+			DRM_ERROR("aux-en-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_sel_gpio = of_get_named_gpio(of_node, "qcom,aux-sel-gpio", 0);
+	if (!gpio_is_valid(parser->aux_sel_gpio)) {
+			DRM_ERROR("aux-sel-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline bool dp_parser_check_prefix(const char *clk_prefix, const char *clk_name)
+{
+	return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
+}
+
+static int dp_parser_init_clk_data(struct dp_parser *parser)
+{
+	int num_clk = 0, i = 0, rc = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	num_clk = of_property_count_strings(dev->of_node, "clock-names");
+	if (num_clk <= 0) {
+		DRM_ERROR("no clocks are defined\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node,
+				"clock-names", i, &clk_name);
+		if (rc) {
+			DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+
+		if (dp_parser_check_prefix("core", clk_name))
+			core_clk_count++;
+
+		if (dp_parser_check_prefix("ctrl", clk_name))
+			ctrl_clk_count++;
+	}
+
+	/* Initialize the CORE power module */
+	if (core_clk_count == 0) {
+		DRM_ERROR("no core clocks are defined\n");
+		return -EINVAL;
+	}
+
+	core_power->num_clk = core_clk_count;
+	core_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * core_power->num_clk,
+			GFP_KERNEL);
+	if (!core_power->clk_config) {
+		return -EINVAL;
+	}
+
+	/* Initialize the CTRL power module */
+	if (ctrl_clk_count == 0) {
+		DRM_ERROR("no ctrl clocks are defined\n");
+		return -EINVAL;
+	}
+
+	ctrl_power->num_clk = ctrl_clk_count;
+	ctrl_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * ctrl_power->num_clk,
+			GFP_KERNEL);
+	if (!ctrl_power->clk_config) {
+		ctrl_power->num_clk = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_clock(struct dp_parser *parser)
+{
+	int rc = 0, i = 0;
+	int num_clk = 0;
+	int core_clk_index = 0, ctrl_clk_index = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	core_power = &parser->mp[DP_CORE_PM];
+	ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	rc =  dp_parser_init_clk_data(parser);
+	if (rc) {
+		DRM_ERROR("failed to initialize power data %d\n", rc);
+		return -EINVAL;
+	}
+
+	core_clk_count = core_power->num_clk;
+	ctrl_clk_count = ctrl_power->num_clk;
+
+	num_clk = core_clk_count + ctrl_clk_count;
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node, "clock-names",
+				i, &clk_name);
+		if (rc) {
+			 DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+		if (dp_parser_check_prefix("core", clk_name) &&
+				core_clk_index < core_clk_count) {
+			struct dss_clk *clk =
+				&core_power->clk_config[core_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			clk->type = DSS_CLK_AHB;
+			core_clk_index++;
+		} else if (dp_parser_check_prefix("ctrl", clk_name) &&
+			   ctrl_clk_index < ctrl_clk_count) {
+			struct dss_clk *clk =
+				&ctrl_power->clk_config[ctrl_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			ctrl_clk_index++;
+
+			if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
+			  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
+				clk->type = DSS_CLK_PCLK;
+			else
+				clk->type = DSS_CLK_AHB;
+		}
+	}
+
+	DRM_DEBUG_DP("clock parsing successful\n");
+
+	return 0;
+}
+
+static int dp_parser_parse(struct dp_parser *parser)
+{
+	int rc = 0;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	/* Default: We assume that PHY is shared between USB and DP (Combo phy) */
+	parser->combo_phy_en = true;
+
+	rc = dp_parser_ctrl_res(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_aux(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_misc(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_clock(parser);
+	if (rc)
+		return rc;
+
+	/* Map the corresponding regulator information according to
+	 * version. Currently, since we only have one supported platform,
+	 * mapping the regulator directly.
+	 */
+	parser->regulator_cfg = &sdm845_dp_reg_cfg;
+
+	rc = dp_parser_gpio(parser);
+	if (rc) {
+		DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is disabled\n");
+		parser->combo_phy_en = false;
+		return rc;
+	}
+
+	rc = dp_parser_pinctrl(parser);
+	return rc;
+}
+
+struct dp_parser *dp_parser_get(struct platform_device *pdev)
+{
+	struct dp_parser *parser;
+
+	parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
+	if (!parser)
+		return ERR_PTR(-ENOMEM);
+
+	parser->parse = dp_parser_parse;
+	parser->pdev = pdev;
+
+	return parser;
+}
+
+void dp_parser_put(struct dp_parser *parser)
+{
+
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
new file mode 100644
index 0000000..b606b40
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PARSER_H_
+#define _DP_PARSER_H_
+
+#define DP_LABEL "MDSS DP DISPLAY"
+#define AUX_CFG_LEN	10
+#define DP_MAX_PIXEL_CLK_KHZ	675000
+
+enum dp_pm_type {
+	DP_CORE_PM,
+	DP_CTRL_PM,
+	DP_PHY_PM,
+	DP_MAX_PM
+};
+
+struct dss_io_data {
+	u32 len;
+	void __iomem *base;
+};
+
+static inline const char *dp_parser_pm_name(enum dp_pm_type module)
+{
+	switch (module) {
+	case DP_CORE_PM:	return "DP_CORE_PM";
+	case DP_CTRL_PM:	return "DP_CTRL_PM";
+	case DP_PHY_PM:		return "DP_PHY_PM";
+	default:		return "???";
+	}
+}
+
+/**
+ * struct dp_display_data  - display related device tree data.
+ *
+ * @ctrl_node: referece to controller device
+ * @phy_node:  reference to phy device
+ * @is_active: is the controller currently active
+ * @name: name of the display
+ * @display_type: type of the display
+ */
+struct dp_display_data {
+	struct device_node *ctrl_node;
+	struct device_node *phy_node;
+	bool is_active;
+	const char *name;
+	const char *display_type;
+};
+
+/**
+ * struct dp_ctrl_resource - controller's IO related data
+ *
+ * @dp_ahb: controller's ahb mapped memory address
+ * @dp_aux: controller's aux mapped memory address
+ * @dp_link: controller's link mapped memory address
+ * @dp_p0: controller's p0 mapped memory address
+ * @phy_io: phy's mapped memory address
+ * @ln_tx0_io: USB-DP lane TX0's mapped memory address
+ * @ln_tx1_io: USB-DP lane TX1's mapped memory address
+ * @dp_cc_io: DP cc's mapped memory address
+ * @qfprom_io: qfprom's mapped memory address
+ * @dp_pll_io: DP PLL mapped memory address
+ * @usb3_dp_com: USB3 DP PHY combo mapped memory address
+ */
+struct dp_io {
+	struct dss_io_data ctrl_io;
+	struct dss_io_data dp_ahb;
+	struct dss_io_data dp_aux;
+	struct dss_io_data dp_link;
+	struct dss_io_data dp_p0;
+	struct dss_io_data phy_io;
+	struct dss_io_data ln_tx0_io;
+	struct dss_io_data ln_tx1_io;
+	struct dss_io_data dp_cc_io;
+	struct dss_io_data qfprom_io;
+	struct dss_io_data dp_pll_io;
+	struct dss_io_data usb3_dp_com;
+};
+
+/**
+ * struct dp_pinctrl - DP's pin control
+ *
+ * @pin: pin-controller's instance
+ * @state_active: active state pin control
+ * @state_hpd_active: hpd active state pin control
+ * @state_suspend: suspend state pin control
+ */
+struct dp_pinctrl {
+	struct pinctrl *pin;
+	struct pinctrl_state *state_active;
+	struct pinctrl_state *state_hpd_active;
+	struct pinctrl_state *state_suspend;
+};
+
+#define DP_ENUM_STR(x)	#x
+#define DP_AUX_CFG_MAX_VALUE_CNT 3
+/**
+ * struct dp_aux_cfg - DP's AUX configuration settings
+ *
+ * @cfg_cnt: count of the configurable settings for the AUX register
+ * @current_index: current index of the AUX config lut
+ * @offset: register offset of the AUX config register
+ * @lut: look up table for the AUX config values for this register
+ */
+struct dp_aux_cfg {
+	u32 cfg_cnt;
+	u32 current_index;
+	u32 offset;
+	u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
+};
+
+/* PHY AUX config registers */
+enum dp_phy_aux_config_type {
+	PHY_AUX_CFG0,
+	PHY_AUX_CFG1,
+	PHY_AUX_CFG2,
+	PHY_AUX_CFG3,
+	PHY_AUX_CFG4,
+	PHY_AUX_CFG5,
+	PHY_AUX_CFG6,
+	PHY_AUX_CFG7,
+	PHY_AUX_CFG8,
+	PHY_AUX_CFG9,
+	PHY_AUX_CFG_MAX,
+};
+
+#define DP_DEV_REGULATOR_MAX	4
+
+/* Regulators for DP devices */
+struct dp_reg_entry {
+	char name[32];
+	int enable_load;
+	int disable_load;
+};
+
+struct dp_regulator_cfg {
+	int num;
+	struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
+};
+
+
+static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return DP_ENUM_STR(PHY_AUX_CFG0);
+	case PHY_AUX_CFG1:
+		return DP_ENUM_STR(PHY_AUX_CFG1);
+	case PHY_AUX_CFG2:
+		return DP_ENUM_STR(PHY_AUX_CFG2);
+	case PHY_AUX_CFG3:
+		return DP_ENUM_STR(PHY_AUX_CFG3);
+	case PHY_AUX_CFG4:
+		return DP_ENUM_STR(PHY_AUX_CFG4);
+	case PHY_AUX_CFG5:
+		return DP_ENUM_STR(PHY_AUX_CFG5);
+	case PHY_AUX_CFG6:
+		return DP_ENUM_STR(PHY_AUX_CFG6);
+	case PHY_AUX_CFG7:
+		return DP_ENUM_STR(PHY_AUX_CFG7);
+	case PHY_AUX_CFG8:
+		return DP_ENUM_STR(PHY_AUX_CFG8);
+	case PHY_AUX_CFG9:
+		return DP_ENUM_STR(PHY_AUX_CFG9);
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * struct dp_parser - DP parser's data exposed to clients
+ *
+ * @pdev: platform data of the client
+ * @mp: gpio, regulator and clock related data
+ * @pinctrl: pin-control related data
+ * @aux_en_gpio: GPIO to control AUX data when using combo PHY
+ * @aux_sel_gpio: GPIO to control plug orientation when using combo PHY
+ * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
+ * @combo_phy_en: Boolean to check whether combo PHY is used
+ * @disp_data: controller's display related data
+ * @parse: function to be called by client to parse device tree.
+ */
+struct dp_parser {
+	struct platform_device *pdev;
+	struct dss_module_power mp[DP_MAX_PM];
+	struct dp_pinctrl pinctrl;
+	unsigned int aux_en_gpio;
+	unsigned int aux_sel_gpio;
+	unsigned int usbplug_cc_gpio;
+	bool combo_phy_en;
+	struct dp_io io;
+	struct dp_display_data disp_data;
+	const struct dp_regulator_cfg *regulator_cfg;
+	u8 l_map[4];
+	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
+	u32 max_pclk_khz;
+
+	int (*parse)(struct dp_parser *parser);
+};
+
+/**
+ * dp_parser_get() - get the DP's device tree parser module
+ *
+ * @pdev: platform data of the client
+ * return: pointer to dp_parser structure.
+ *
+ * This function provides client capability to parse the
+ * device tree and populate the data structures. The data
+ * related to clock, regulators, pin-control and other
+ * can be parsed using this module.
+ */
+struct dp_parser *dp_parser_get(struct platform_device *pdev);
+
+/**
+ * dp_parser_put() - cleans the dp_parser module
+ *
+ * @parser: pointer to the parser's data.
+ */
+void dp_parser_put(struct dp_parser *parser);
+#endif
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
new file mode 100644
index 0000000..3fa4c9b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_gpio.h>
+#include "dp_power.h"
+
+struct dp_power_private {
+	struct dp_parser *parser;
+	struct platform_device *pdev;
+	struct clk *pixel_clk_rcg;
+	struct clk *link_clk_src;
+	struct clk *pixel_provider;
+	struct clk *link_provider;
+	struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
+
+	struct dp_power dp_power;
+};
+
+static void dp_power_regulator_disable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer,
+					   regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dp_power_regulator_enable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+						 regs[i].enable_load);
+			if (ret < 0) {
+				pr_err("regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		pr_err("regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
+static int dp_power_regulator_init(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	struct platform_device *pdev = power->pdev;
+	int num = power->parser->regulator_cfg->num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(&pdev->dev, num, s);
+	if (ret < 0) {
+		pr_err("%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dp_power_pinctrl_set(struct dp_power_private *power, bool active)
+{
+	int rc = -EFAULT;
+	struct pinctrl_state *pin_state;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return 0;
+
+	pin_state = active ? parser->pinctrl.state_active
+				: parser->pinctrl.state_suspend;
+
+	rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
+	if (rc) {
+		DRM_ERROR("can not set %s pins\n",
+			active ? "dp_active" : "dp_sleep");
+		return rc;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_init(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct dss_module_power *core, *ctrl;
+	struct device *dev = &power->pdev->dev;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (power->parser->pll && power->parser->pll->get_provider) {
+		rc = power->parser->pll->get_provider(power->parser->pll,
+				&power->link_provider, &power->pixel_provider);
+		if (rc) {
+			pr_info("%s: can't get provider from pll, don't set parent\n",
+				__func__);
+			return 0;
+		}
+	}
+
+	rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CORE_PM), rc);
+		return rc;
+	}
+
+	rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CTRL_PM), rc);
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
+	if (IS_ERR(power->pixel_clk_rcg)) {
+		DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
+		power->pixel_clk_rcg = NULL;
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_deinit(struct dp_power_private *power)
+{
+	struct dss_module_power *core, *ctrl;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (!core || !ctrl) {
+		DRM_ERROR("invalid power_data\n");
+		return -EINVAL;
+	}
+
+	msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
+	msm_dss_put_clk(core->clk_config, core->num_clk);
+	return 0;
+}
+
+static int dp_power_clk_set_rate(struct dp_power_private *power,
+		enum dp_pm_type module, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp = &power->parser->mp[module];
+
+	if (enable) {
+		rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
+		if (rc) {
+			DRM_ERROR("failed to set clks rate.\n");
+			return rc;
+		}
+	}
+
+	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
+	if (rc) {
+		DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+int dp_power_clk_enable(struct dp_power *dp_power,
+		enum dp_pm_type pm_type, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+	mp = &power->parser->mp[pm_type];
+
+	if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
+		DRM_ERROR("unsupported power module: %s\n",
+				dp_parser_pm_name(pm_type));
+		return -EINVAL;
+	}
+
+	if (enable) {
+		if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
+			DRM_DEBUG_DP("core clks already enabled\n");
+			return 0;
+		}
+
+		if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
+			DRM_DEBUG_DP("links clks already enabled\n");
+			return 0;
+		}
+
+		if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
+			DRM_DEBUG_DP("Need to enable core clks before link clks\n");
+
+			rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
+			if (rc) {
+				DRM_ERROR("failed to enable clks: %s. err=%d\n",
+					dp_parser_pm_name(DP_CORE_PM), rc);
+				return rc;
+			}
+			dp_power->core_clks_on = true;
+		}
+	}
+
+	rc = dp_power_clk_set_rate(power, pm_type, enable);
+	if (rc) {
+		DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type), rc);
+			return rc;
+	}
+
+	if (pm_type == DP_CORE_PM)
+		dp_power->core_clks_on = enable;
+	else
+		dp_power->link_clks_on = enable;
+
+	DRM_DEBUG_DP("%s clocks for %s\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type));
+	DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
+		dp_power->link_clks_on ? "on" : "off",
+		dp_power->core_clks_on ? "on" : "off");
+
+	return 0;
+}
+
+static int dp_power_request_gpios(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct device *dev = &power->pdev->dev;
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_en_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
+		if (rc) {
+			DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->aux_sel_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
+		if (rc) {
+			DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->usbplug_cc_gpio)) {
+		rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
+		if (rc) {
+			DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static void dp_power_set_gpio(struct dp_power_private *power, bool flip)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_sel_gpio))
+		gpio_direction_output(parser->aux_sel_gpio, flip);
+
+	if (gpio_is_valid(parser->aux_en_gpio))
+		gpio_direction_output(parser->aux_en_gpio, 0);
+
+	if (gpio_is_valid(parser->usbplug_cc_gpio))
+		gpio_set_value(parser->usbplug_cc_gpio, 0);
+}
+
+static int dp_power_config_gpios(struct dp_power_private *power, bool flip)
+{
+	int rc = 0;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return rc;
+
+	rc = dp_power_request_gpios(power);
+	if (rc) {
+		DRM_ERROR("gpio request failed\n");
+		return rc;
+	}
+
+	dp_power_set_gpio(power, flip);
+	return 0;
+}
+
+static void dp_power_disable_gpios(struct dp_power_private *power)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return;
+
+	gpio_set_value(parser->aux_sel_gpio, 0);
+	gpio_set_value(parser->aux_en_gpio, 0);
+	gpio_set_value(parser->usbplug_cc_gpio, 0);
+	gpio_free(parser->aux_sel_gpio);
+	gpio_free(parser->aux_en_gpio);
+	gpio_free(parser->usbplug_cc_gpio);
+}
+
+int dp_power_client_init(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return -EINVAL;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_enable(&power->pdev->dev);
+
+	rc = dp_power_regulator_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init regulators %d\n", rc);
+		goto error;
+	}
+
+	rc = dp_power_clk_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init clocks %d\n", rc);
+		goto error;
+	}
+	return 0;
+
+error:
+	pm_runtime_disable(&power->pdev->dev);
+	return rc;
+}
+
+void dp_power_client_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_deinit(power);
+	pm_runtime_disable(&power->pdev->dev);
+
+}
+
+int dp_power_set_link_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	u32 num;
+	struct dss_clk *cfg;
+	char *name = "ctrl_link_clk";
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	num = power->parser->mp[DP_CTRL_PM].num_clk;
+	cfg = power->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	if (num && power->link_provider) {
+		power->link_clk_src = clk_get_parent(cfg->clk);
+			if (power->link_clk_src) {
+				clk_set_parent(power->link_clk_src, power->link_provider);
+				DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+						__clk_get_name(power->link_provider),
+						__clk_get_name(power->link_clk_src));
+			} else {
+				DRM_ERROR("couldn't get parent for clk=%s\n", name);
+				rc = -EINVAL;
+			}
+	} else {
+		DRM_ERROR("%s clock could not be set parent\n", name);
+		rc = -EINVAL;
+	}
+exit:
+	return rc;
+}
+
+int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	if (power->pixel_clk_rcg && power->pixel_provider) {
+		rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
+		if (rc) {
+			DRM_ERROR("failed to set parent clk src, %d\n", rc);
+			return rc;
+		}
+		DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+					__clk_get_name(power->pixel_provider),
+					__clk_get_name(power->pixel_clk_rcg));
+	}
+
+	return 0;
+}
+
+int dp_power_init(struct dp_power *dp_power, bool flip)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_get_sync(&power->pdev->dev);
+	rc = dp_power_regulator_enable(power);
+	if (rc) {
+		DRM_ERROR("failed to enable regulators, %d\n", rc);
+		goto exit;
+	}
+
+	rc = dp_power_pinctrl_set(power, true);
+	if (rc) {
+		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
+		goto err_pinctrl;
+	}
+
+	rc = dp_power_config_gpios(power, flip);
+	if (rc) {
+		DRM_ERROR("failed to enable gpios, %d\n", rc);
+		goto err_gpio;
+	}
+
+	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
+	if (rc) {
+		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	dp_power_disable_gpios(power);
+err_gpio:
+	dp_power_pinctrl_set(power, false);
+err_pinctrl:
+	dp_power_regulator_disable(power);
+exit:
+	pm_runtime_put_sync(&power->pdev->dev);
+	return rc;
+}
+
+int dp_power_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_enable(dp_power, DP_CORE_PM, false);
+	dp_power_disable_gpios(power);
+	dp_power_pinctrl_set(power, false);
+	dp_power_regulator_disable(power);
+	pm_runtime_put_sync(&power->pdev->dev);
+	return 0;
+}
+
+struct dp_power *dp_power_get(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	struct dp_power *dp_power;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
+	if (!power) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	power->parser = parser;
+	power->pdev = parser->pdev;
+
+	dp_power = &power->dp_power;
+
+	return dp_power;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_power_put(struct dp_power *dp_power)
+{
+	struct dp_power_private *power = NULL;
+
+	if (!dp_power)
+		return;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	devm_kfree(&power->pdev->dev, power);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
new file mode 100644
index 0000000..40d7e73
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_POWER_H_
+#define _DP_POWER_H_
+
+#include "dp_parser.h"
+
+/**
+ * sruct dp_power - DisplayPort's power related data
+ *
+ * @init: initializes the regulators/core clocks/GPIOs/pinctrl
+ * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
+ * @clk_enable: enable/disable the DP clocks
+ * @set_link_clk_parent: set the parent of DP link clock
+ * @set_pixel_clk_parent: set the parent of DP pixel clock
+ */
+struct dp_power {
+	bool core_clks_on;
+	bool link_clks_on;
+};
+
+int dp_power_init(struct dp_power *power, bool flip);
+int dp_power_deinit(struct dp_power *power);
+int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
+				bool enable);
+int dp_power_set_link_clk_parent(struct dp_power *power);
+int dp_power_set_pixel_clk_parent(struct dp_power *power);
+int dp_power_client_init(struct dp_power *power);
+void dp_power_client_deinit(struct dp_power *power);
+
+/**
+ * dp_power_get() - configure and get the DisplayPort power module data
+ *
+ * @parser: instance of parser module
+ * return: pointer to allocated power module data
+ *
+ * This API will configure the DisplayPort's power module and provides
+ * methods to be called by the client to configure the power related
+ * modueles.
+ */
+struct dp_power *dp_power_get(struct dp_parser *parser);
+
+/**
+ * dp_power_put() - release the power related resources
+ *
+ * @power: pointer to the power module's data
+ */
+void dp_power_put(struct dp_power *power);
+#endif /* _DP_POWER_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
new file mode 100644
index 0000000..5468f7b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_reg.h
@@ -0,0 +1,488 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_REG_H_
+#define _DP_REG_H_
+
+/* DP_TX Registers */
+#define REG_DP_HW_VERSION			(0x00000000)
+
+#define REG_DP_SW_RESET				(0x00000010)
+#define DP_SW_RESET				(0x00000001)
+
+#define REG_DP_PHY_CTRL				(0x00000014)
+#define DP_PHY_CTRL_SW_RESET_PLL		(0x00000001)
+#define DP_PHY_CTRL_SW_RESET			(0x00000004)
+
+#define REG_DP_CLK_CTRL				(0x00000018)
+#define REG_DP_CLK_ACTIVE			(0x0000001C)
+#define REG_DP_INTR_STATUS			(0x00000020)
+#define REG_DP_INTR_STATUS2			(0x00000024)
+#define REG_DP_INTR_STATUS3			(0x00000028)
+
+#define REG_DP_DP_HPD_CTRL			(0x00000000)
+#define DP_DP_HPD_CTRL_HPD_EN			(0x00000001)
+
+#define REG_DP_DP_HPD_INT_STATUS		(0x00000004)
+
+#define REG_DP_DP_HPD_INT_ACK			(0x00000008)
+#define DP_DP_HPD_PLUG_INT_ACK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_ACK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_ACK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_ACK		(0x00000008)
+
+#define REG_DP_DP_HPD_INT_MASK			(0x0000000C)
+#define DP_DP_HPD_PLUG_INT_MASK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_MASK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_MASK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_MASK		(0x00000008)
+
+#define REG_DP_DP_HPD_REFTIMER			(0x00000018)
+#define REG_DP_DP_HPD_EVENT_TIME_0		(0x0000001C)
+#define REG_DP_DP_HPD_EVENT_TIME_1		(0x00000020)
+
+#define REG_DP_AUX_CTRL				(0x00000030)
+#define DP_AUX_CTRL_ENABLE			(0x00000001)
+#define DP_AUX_CTRL_RESET			(0x00000002)
+
+#define REG_DP_AUX_DATA				(0x00000034)
+#define DP_AUX_DATA_READ			(0x00000001)
+#define DP_AUX_DATA_WRITE			(0x00000000)
+#define DP_AUX_DATA_OFFSET			(0x00000008)
+#define DP_AUX_DATA_INDEX_OFFSET		(0x00000010)
+#define DP_AUX_DATA_MASK			(0x0000ff00)
+#define DP_AUX_DATA_INDEX_WRITE			(0x80000000)
+
+#define REG_DP_AUX_TRANS_CTRL			(0x00000038)
+#define DP_AUX_TRANS_CTRL_I2C			(0x00000100)
+#define DP_AUX_TRANS_CTRL_GO			(0x00000200)
+#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR		(0x00000400)
+#define DP_AUX_TRANS_CTRL_NO_SEND_STOP		(0x00000800)
+
+#define REG_DP_TIMEOUT_COUNT			(0x0000003C)
+#define REG_DP_AUX_LIMITS			(0x00000040)
+#define REG_DP_AUX_STATUS			(0x00000044)
+
+#define DP_DPCD_CP_IRQ				(0x201)
+#define DP_DPCD_RXSTATUS			(0x69493)
+
+#define DP_INTERRUPT_TRANS_NUM			(0x000000A0)
+
+#define REG_DP_MAINLINK_CTRL			(0x00000000)
+#define DP_MAINLINK_CTRL_ENABLE			(0x00000001)
+#define DP_MAINLINK_CTRL_RESET			(0x00000002)
+#define DP_MAINLINK_FB_BOUNDARY_SEL		(0x02000000)
+
+#define REG_DP_STATE_CTRL			(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1	(0x00000001)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2	(0x00000002)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3	(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4	(0x00000008)
+#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE	(0x00000010)
+#define DP_STATE_CTRL_LINK_PRBS7		(0x00000020)
+#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN	(0x00000040)
+#define DP_STATE_CTRL_SEND_VIDEO		(0x00000080)
+#define DP_STATE_CTRL_PUSH_IDLE 		(0x00000100)
+
+#define REG_DP_CONFIGURATION_CTRL		(0x00000008)
+#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK	(0x00000001)
+#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
+#define DP_CONFIGURATION_CTRL_P_INTERLACED	(0x00000004)
+#define DP_CONFIGURATION_CTRL_INTERLACED_BTF	(0x00000008)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES	(0x00000010)
+#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING	(0x00000040)
+#define DP_CONFIGURATION_CTRL_SEND_VSC		(0x00000080)
+#define DP_CONFIGURATION_CTRL_BPC		(0x00000100)
+#define DP_CONFIGURATION_CTRL_ASSR		(0x00000400)
+#define DP_CONFIGURATION_CTRL_RGB_YUV		(0x00000800)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV		(0x00002000)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
+#define DP_CONFIGURATION_CTRL_BPC_SHIFT 	      (0x08)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT	      (0x0D)
+
+#define REG_DP_SOFTWARE_MVID			(0x00000010)
+#define REG_DP_SOFTWARE_NVID			(0x00000018)
+#define REG_DP_TOTAL_HOR_VER			(0x0000001C)
+#define REG_DP_START_HOR_VER_FROM_SYNC		(0x00000020)
+#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY	(0x00000024)
+#define REG_DP_ACTIVE_HOR_VER			(0x00000028)
+
+#define REG_DP_MISC1_MISC0			(0x0000002C)
+#define DP_MISC0_SYNCHRONOUS_CLK		(0x00000001)
+#define DP_MISC0_COLORIMETRY_CFG_SHIFT		(0x00000001)
+#define DP_MISC0_TEST_BITS_DEPTH_SHIFT		(0x00000005)
+
+#define REG_DP_VALID_BOUNDARY			(0x00000030)
+#define REG_DP_VALID_BOUNDARY_2			(0x00000034)
+
+#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING	(0x00000038)
+#define LANE0_MAPPING_SHIFT			(0x00000000)
+#define LANE1_MAPPING_SHIFT			(0x00000002)
+#define LANE2_MAPPING_SHIFT			(0x00000004)
+#define LANE3_MAPPING_SHIFT			(0x00000006)
+
+#define REG_DP_MAINLINK_READY			(0x00000040)
+#define DP_MAINLINK_READY_FOR_VIDEO		(0x00000001)
+#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT	(0x00000003)
+
+#define REG_DP_MAINLINK_LEVELS			(0x00000044)
+#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2	(0x00000002)
+
+
+#define REG_DP_TU				(0x0000004C)
+
+#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET	(0x00000054)
+#define DP_HBR2_ERM_PATTERN			(0x00010000)
+
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0	(0x000000C0)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1	(0x000000C4)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2	(0x000000C8)
+
+#define MMSS_DP_MISC1_MISC0			(0x0000002C)
+#define MMSS_DP_AUDIO_TIMING_GEN		(0x00000080)
+#define MMSS_DP_AUDIO_TIMING_RBR_32		(0x00000084)
+#define MMSS_DP_AUDIO_TIMING_HBR_32		(0x00000088)
+#define MMSS_DP_AUDIO_TIMING_RBR_44		(0x0000008C)
+#define MMSS_DP_AUDIO_TIMING_HBR_44		(0x00000090)
+#define MMSS_DP_AUDIO_TIMING_RBR_48		(0x00000094)
+#define MMSS_DP_AUDIO_TIMING_HBR_48		(0x00000098)
+
+#define MMSS_DP_PSR_CRC_RG			(0x00000154)
+#define MMSS_DP_PSR_CRC_B			(0x00000158)
+
+#define REG_DP_COMPRESSION_MODE_CTRL		(0x00000180)
+
+#define MMSS_DP_AUDIO_CFG			(0x00000200)
+#define MMSS_DP_AUDIO_STATUS			(0x00000204)
+#define MMSS_DP_AUDIO_PKT_CTRL			(0x00000208)
+#define MMSS_DP_AUDIO_PKT_CTRL2			(0x0000020C)
+#define MMSS_DP_AUDIO_ACR_CTRL			(0x00000210)
+#define MMSS_DP_AUDIO_CTRL_RESET		(0x00000214)
+
+#define MMSS_DP_SDP_CFG				(0x00000228)
+#define MMSS_DP_SDP_CFG2			(0x0000022C)
+#define MMSS_DP_AUDIO_TIMESTAMP_0		(0x00000230)
+#define MMSS_DP_AUDIO_TIMESTAMP_1		(0x00000234)
+
+#define MMSS_DP_AUDIO_STREAM_0			(0x00000240)
+#define MMSS_DP_AUDIO_STREAM_1			(0x00000244)
+
+#define MMSS_DP_EXTENSION_0			(0x00000250)
+#define MMSS_DP_EXTENSION_1			(0x00000254)
+#define MMSS_DP_EXTENSION_2			(0x00000258)
+#define MMSS_DP_EXTENSION_3			(0x0000025C)
+#define MMSS_DP_EXTENSION_4			(0x00000260)
+#define MMSS_DP_EXTENSION_5			(0x00000264)
+#define MMSS_DP_EXTENSION_6			(0x00000268)
+#define MMSS_DP_EXTENSION_7			(0x0000026C)
+#define MMSS_DP_EXTENSION_8			(0x00000270)
+#define MMSS_DP_EXTENSION_9			(0x00000274)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_0		(0x00000278)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_1		(0x0000027C)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_2		(0x00000280)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_3		(0x00000284)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_4		(0x00000288)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_5		(0x0000028C)
+#define MMSS_DP_AUDIO_ISRC_0			(0x00000290)
+#define MMSS_DP_AUDIO_ISRC_1			(0x00000294)
+#define MMSS_DP_AUDIO_ISRC_2			(0x00000298)
+#define MMSS_DP_AUDIO_ISRC_3			(0x0000029C)
+#define MMSS_DP_AUDIO_ISRC_4			(0x000002A0)
+#define MMSS_DP_AUDIO_ISRC_5			(0x000002A4)
+#define MMSS_DP_AUDIO_INFOFRAME_0		(0x000002A8)
+#define MMSS_DP_AUDIO_INFOFRAME_1		(0x000002AC)
+#define MMSS_DP_AUDIO_INFOFRAME_2		(0x000002B0)
+
+#define MMSS_DP_GENERIC0_0			(0x00000300)
+#define MMSS_DP_GENERIC0_1			(0x00000304)
+#define MMSS_DP_GENERIC0_2			(0x00000308)
+#define MMSS_DP_GENERIC0_3			(0x0000030C)
+#define MMSS_DP_GENERIC0_4			(0x00000310)
+#define MMSS_DP_GENERIC0_5			(0x00000314)
+#define MMSS_DP_GENERIC0_6			(0x00000318)
+#define MMSS_DP_GENERIC0_7			(0x0000031C)
+#define MMSS_DP_GENERIC0_8			(0x00000320)
+#define MMSS_DP_GENERIC0_9			(0x00000324)
+#define MMSS_DP_GENERIC1_0			(0x00000328)
+#define MMSS_DP_GENERIC1_1			(0x0000032C)
+#define MMSS_DP_GENERIC1_2			(0x00000330)
+#define MMSS_DP_GENERIC1_3			(0x00000334)
+#define MMSS_DP_GENERIC1_4			(0x00000338)
+#define MMSS_DP_GENERIC1_5			(0x0000033C)
+#define MMSS_DP_GENERIC1_6			(0x00000340)
+#define MMSS_DP_GENERIC1_7			(0x00000344)
+#define MMSS_DP_GENERIC1_8			(0x00000348)
+#define MMSS_DP_GENERIC1_9			(0x0000034C)
+
+#define MMSS_DP_VSCEXT_0			(0x000002D0)
+#define MMSS_DP_VSCEXT_1			(0x000002D4)
+#define MMSS_DP_VSCEXT_2			(0x000002D8)
+#define MMSS_DP_VSCEXT_3			(0x000002DC)
+#define MMSS_DP_VSCEXT_4			(0x000002E0)
+#define MMSS_DP_VSCEXT_5			(0x000002E4)
+#define MMSS_DP_VSCEXT_6			(0x000002E8)
+#define MMSS_DP_VSCEXT_7			(0x000002EC)
+#define MMSS_DP_VSCEXT_8			(0x000002F0)
+#define MMSS_DP_VSCEXT_9			(0x000002F4)
+
+#define MMSS_DP_BIST_ENABLE			(0x00000000)
+#define DP_BIST_ENABLE_DPBIST_EN		(0x00000001)
+
+#define MMSS_DP_TIMING_ENGINE_EN		(0x00000010)
+#define DP_TIMING_ENGINE_EN_EN			(0x00000001)
+
+#define MMSS_DP_INTF_CONFIG			(0x00000014)
+#define MMSS_DP_INTF_HSYNC_CTL			(0x00000018)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F0		(0x0000001C)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F1		(0x00000020)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0	(0x00000024)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1	(0x00000028)
+#define MMSS_INTF_DISPLAY_V_START_F0		(0x0000002C)
+#define MMSS_INTF_DISPLAY_V_START_F1		(0x00000030)
+#define MMSS_DP_INTF_DISPLAY_V_END_F0		(0x00000034)
+#define MMSS_DP_INTF_DISPLAY_V_END_F1		(0x00000038)
+#define MMSS_DP_INTF_ACTIVE_V_START_F0		(0x0000003C)
+#define MMSS_DP_INTF_ACTIVE_V_START_F1		(0x00000040)
+#define MMSS_DP_INTF_ACTIVE_V_END_F0		(0x00000044)
+#define MMSS_DP_INTF_ACTIVE_V_END_F1		(0x00000048)
+#define MMSS_DP_INTF_DISPLAY_HCTL		(0x0000004C)
+#define MMSS_DP_INTF_ACTIVE_HCTL		(0x00000050)
+#define MMSS_DP_INTF_POLARITY_CTL		(0x00000058)
+
+#define MMSS_DP_TPG_MAIN_CONTROL		(0x00000060)
+#define DP_TPG_CHECKERED_RECT_PATTERN		(0x00000100)
+
+#define MMSS_DP_TPG_VIDEO_CONFIG		(0x00000064)
+#define DP_TPG_VIDEO_CONFIG_BPP_8BIT		(0x00000001)
+#define DP_TPG_VIDEO_CONFIG_RGB			(0x00000004)
+
+#define MMSS_DP_ASYNC_FIFO_CONFIG		(0x00000088)
+
+/*DP PHY Register offsets */
+#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
+#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
+#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
+#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
+
+#define REG_DP_PHY_CFG                          (0x00000010)
+
+#define REG_DP_PHY_PD_CTL                       (0x00000018)
+#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
+#define DP_PHY_PD_CTL_PSR_PWRDN			(0x00000002)
+#define DP_PHY_PD_CTL_AUX_PWRDN			(0x00000004)
+#define DP_PHY_PD_CTL_LANE_0_1_PWRDN		(0x00000008)
+#define DP_PHY_PD_CTL_LANE_2_3_PWRDN		(0x00000010)
+#define DP_PHY_PD_CTL_PLL_PWRDN			(0x00000020)
+#define DP_PHY_PD_CTL_DP_CLAMP_EN		(0x00000040)
+
+#define REG_DP_PHY_MODE                         (0x0000001C)
+
+#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
+#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
+#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
+#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
+#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
+#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
+#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
+#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
+#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
+#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
+
+#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
+#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
+#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
+#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
+#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
+#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
+
+
+#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
+#define REG_DP_PHY_AUX_BIST_CFG			(0x00000050)
+
+#define REG_DP_PHY_VCO_DIV			0x0064
+#define REG_DP_PHY_TX0_TX1_LANE_CTL		0x006C
+#define REG_DP_PHY_TX2_TX3_LANE_CTL		0x0088
+
+#define REG_DP_PHY_SPARE0			(0x00AC)
+#define DP_PHY_SPARE0_MASK			(0x000F)
+#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT	(0x0004);
+
+#define REG_DP_PHY_STATUS			(0x00C0)
+
+/* Tx registers */
+#define REG_DP_PHY_TXn_BIST_MODE_LANENO		0x0000
+#define REG_DP_PHY_TXn_CLKBUF_ENABLE		0x0008
+
+#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL		0x000C
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK	0x001F
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN	0x0020
+
+#define REG_DP_PHY_TXn_TX_DRV_LVL		0x001C
+#define DP_PHY_TXn_TX_DRV_LVL_MASK		0x001F
+#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN		0x0020
+
+#define REG_DP_PHY_TXn_RESET_TSYNC_EN		0x0024
+#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN	0x0028
+#define REG_DP_PHY_TXn_TX_BAND			0x002C
+#define REG_DP_PHY_TXn_SLEW_CNTL		0x0030
+#define REG_DP_PHY_TXn_INTERFACE_SELECT		0x0034
+
+#define REG_DP_PHY_TXn_RES_CODE_LANE_TX		0x003C
+#define REG_DP_PHY_TXn_RES_CODE_LANE_RX		0x0040
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX	0x0044
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX	0x0048
+
+#define REG_DP_PHY_TXn_DEBUG_BUS_SEL		0x0058
+#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN	0x005C
+#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN		0x0060
+#define REG_DP_PHY_TXn_TX_POL_INV		0x0064
+#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
+
+#define REG_DP_PHY_TXn_LANE_MODE_1		0x008C
+
+#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN		0x00C0
+#define REG_DP_PHY_TXn_TX_INTERFACE_MODE	0x00C4
+
+#define REG_DP_PHY_TXn_VMODE_CTRL1		0x00F0
+
+/* PLL register offset */
+#define QSERDES_COM_ATB_SEL1			0x0000
+#define QSERDES_COM_ATB_SEL2			0x0004
+#define QSERDES_COM_FREQ_UPDATE			0x0008
+#define QSERDES_COM_BG_TIMER			0x000C
+#define QSERDES_COM_SSC_EN_CENTER		0x0010
+#define QSERDES_COM_SSC_ADJ_PER1		0x0014
+#define QSERDES_COM_SSC_ADJ_PER2		0x0018
+#define QSERDES_COM_SSC_PER1			0x001C
+#define QSERDES_COM_SSC_PER2			0x0020
+#define QSERDES_COM_SSC_STEP_SIZE1		0x0024
+#define QSERDES_COM_SSC_STEP_SIZE2		0x0028
+#define QSERDES_COM_POST_DIV			0x002C
+#define QSERDES_COM_POST_DIV_MUX		0x0030
+
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		0x0034
+#define QSERDES_COM_BIAS_EN			0x0001
+#define QSERDES_COM_BIAS_EN_MUX			0x0002
+#define QSERDES_COM_CLKBUF_R_EN			0x0004
+#define QSERDES_COM_CLKBUF_L_EN			0x0008
+#define QSERDES_COM_EN_SYSCLK_TX_SEL		0x0010
+#define QSERDES_COM_CLKBUF_RX_DRIVE_L		0x0020
+#define QSERDES_COM_CLKBUF_RX_DRIVE_R		0x0040
+
+#define QSERDES_COM_CLK_ENABLE1			0x0038
+#define QSERDES_COM_SYS_CLK_CTRL		0x003C
+#define QSERDES_COM_SYSCLK_BUF_ENABLE		0x0040
+#define QSERDES_COM_PLL_EN			0x0044
+#define QSERDES_COM_PLL_IVCO			0x0048
+#define QSERDES_COM_CMN_IETRIM			0x004C
+#define QSERDES_COM_CMN_IPTRIM			0x0050
+
+#define QSERDES_COM_CP_CTRL_MODE0		0x0060
+#define QSERDES_COM_CP_CTRL_MODE1		0x0064
+#define QSERDES_COM_PLL_RCTRL_MODE0		0x0068
+#define QSERDES_COM_PLL_RCTRL_MODE1		0x006C
+#define QSERDES_COM_PLL_CCTRL_MODE0		0x0070
+#define QSERDES_COM_PLL_CCTRL_MODE1		0x0074
+#define QSERDES_COM_PLL_CNTRL			0x0078
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM		0x007C
+#define QSERDES_COM_SYSCLK_EN_SEL		0x0080
+#define QSERDES_COM_CML_SYSCLK_SEL		0x0084
+#define QSERDES_COM_RESETSM_CNTRL		0x0088
+#define QSERDES_COM_RESETSM_CNTRL2		0x008C
+#define QSERDES_COM_LOCK_CMP_EN			0x0090
+#define QSERDES_COM_LOCK_CMP_CFG		0x0094
+#define QSERDES_COM_LOCK_CMP1_MODE0		0x0098
+#define QSERDES_COM_LOCK_CMP2_MODE0		0x009C
+#define QSERDES_COM_LOCK_CMP3_MODE0		0x00A0
+
+#define QSERDES_COM_DEC_START_MODE0		0x00B0
+#define QSERDES_COM_DEC_START_MODE1		0x00B4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0	0x00B8
+#define QSERDES_COM_DIV_FRAC_START2_MODE0	0x00BC
+#define QSERDES_COM_DIV_FRAC_START3_MODE0	0x00C0
+#define QSERDES_COM_DIV_FRAC_START1_MODE1	0x00C4
+#define QSERDES_COM_DIV_FRAC_START2_MODE1	0x00C8
+#define QSERDES_COM_DIV_FRAC_START3_MODE1	0x00CC
+#define QSERDES_COM_INTEGLOOP_INITVAL		0x00D0
+#define QSERDES_COM_INTEGLOOP_EN		0x00D4
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	0x00D8
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	0x00DC
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	0x00E0
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	0x00E4
+#define QSERDES_COM_VCOCAL_DEADMAN_CTRL		0x00E8
+#define QSERDES_COM_VCO_TUNE_CTRL		0x00EC
+#define QSERDES_COM_VCO_TUNE_MAP		0x00F0
+
+#define QSERDES_COM_CMN_STATUS			0x0124
+#define QSERDES_COM_RESET_SM_STATUS		0x0128
+
+#define QSERDES_COM_CLK_SEL			0x0138
+#define QSERDES_COM_HSCLK_SEL			0x013C
+
+#define QSERDES_COM_CORECLK_DIV_MODE0		0x0148
+
+#define QSERDES_COM_SW_RESET			0x0150
+#define QSERDES_COM_CORE_CLK_EN			0x0154
+#define QSERDES_COM_C_READY_STATUS		0x0158
+#define QSERDES_COM_CMN_CONFIG			0x015C
+
+#define QSERDES_COM_SVS_MODE_CLK_SEL		0x0164
+
+/* DP MMSS_CC registers */
+#define MMSS_DP_LINK_CMD_RCGR			(0x0138)
+#define MMSS_DP_LINK_CFG_RCGR			(0x013C)
+#define MMSS_DP_PIXEL_M				(0x0174)
+#define MMSS_DP_PIXEL_N				(0x0178)
+
+/* DP HDCP 1.3 registers */
+#define DP_HDCP_CTRL                                   (0x0A0)
+#define DP_HDCP_STATUS                                 (0x0A4)
+#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
+#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
+#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
+#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
+#define DP_HDCP_SHA_STATUS                             (0x0C8)
+#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
+#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
+#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
+#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
+#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
+
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
+
+/* USB3 DP COM registers */
+#define REG_USB3_DP_COM_RESET_OVRD_CTRL			(0x1C)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET		(0x01)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX	(0x02)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET		(0x04)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX	(0x08)
+
+#define REG_USB3_DP_COM_PHY_MODE_CTRL			(0x00)
+#define USB3_DP_COM_PHY_MODE_DP				(0x02)
+
+#define REG_USB3_DP_COM_SW_RESET			(0x04)
+#define USB3_DP_COM_SW_RESET_SET			(0x01)
+
+#define REG_USB3_DP_COM_TYPEC_CTRL			(0x10)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL			(0x01)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX		(0x02)
+
+#define REG_USB3_DP_COM_SWI_CTRL			(0x0c)
+
+#define REG_USB3_DP_COM_POWER_DOWN_CTRL			(0x08)
+#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN		(0x01)
+
+
+
+#endif /* _DP_REG_H_ */
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index c84f0a8..e5e93e3 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
 	msm_dsi_register();
 	msm_edp_register();
 	msm_hdmi_register();
+	msm_dp_register();
 	adreno_register();
 	return platform_driver_register(&msm_platform_driver);
 }
@@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
 {
 	DBG("fini");
 	platform_driver_unregister(&msm_platform_driver);
+	msm_dp_unregister();
 	msm_hdmi_unregister();
 	adreno_unregister();
 	msm_edp_unregister();
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 71547e7..8b068ec 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -159,6 +159,8 @@ struct msm_drm_private {
 	/* DSI is shared by mdp4 and mdp5 */
 	struct msm_dsi *dsi[2];
 
+	struct msm_dp *dp;
+
 	/* when we have more than one 'msm_gpu' these need to be an array: */
 	struct msm_gpu *gpu;
 	struct msm_file_private *lastctx;
@@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
 }
 #endif
 
+#ifdef CONFIG_DRM_MSM_DP
+int __init msm_dp_register(void);
+void __exit msm_dp_unregister(void);
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			 struct drm_encoder *encoder);
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder);
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder);
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode);
+
+#else
+static inline int __init msm_dp_register(void)
+{
+	return -EINVAL;
+}
+static inline void __exit msm_dp_unregister(void)
+{
+}
+static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
+				       struct drm_device *dev,
+				       struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+}
+#endif
+
 void __init msm_mdp_register(void);
 void __exit msm_mdp_unregister(void);
 void __init msm_dpu_register(void);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Chandan Uddaraju]

Add the needed displayPort files to enable DP driver
on msm target.

"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.

changes in v2:
-- Update copyright markings on all relevant files.
-- Change pr_err() to DRM_ERROR()
-- Use APIs directly instead of function pointers.
-- Use drm_display_mode structure to store link parameters in the driver.
-- Use macros for register definitions instead of hardcoded values.
-- Replace writel_relaxed/readl_relaxed with writel/readl
   and remove memory barriers.
-- Remove unnecessary NULL checks.
-- Use drm helper functions for dpcd read/write.
-- Use DRM_DEBUG_DP for debug msgs.

changes in V3:
-- Removed changes in dpu_io_util.[ch]
-- Added locking around "is_connected" flag and removed atomic_set()
-- Removed the argument validation checks in all the static functions
   except initialization functions and few API calls across msm/dp files
-- Removed hardcoded values for register reads/writes
-- Removed vreg related generic structures.
-- Added return values where ever necessary.
-- Updated dp_ctrl_on function.
-- Calling the ctrl specific catalog functions directly instead of
   function pointers.
-- Added seperate change that adds standard value in drm_dp_helper file.
-- Added separate change in this list that is used to initialize
   displayport in DPU driver.
-- Added change to use drm_dp_get_adjust_request_voltage() function.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                 |    9 +
 drivers/gpu/drm/msm/Makefile                |   13 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
 drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
 drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
 drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
 drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
 drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
 drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
 drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
 drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
 drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
 drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
 drivers/gpu/drm/msm/dp/dp_link.c            | 1185 ++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
 drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
 drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
 drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
 drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
 drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
 drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
 drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
 drivers/gpu/drm/msm/msm_drv.c               |    2 +
 drivers/gpu/drm/msm/msm_drv.h               |   42 +
 26 files changed, 8366 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
 create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
 create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 6deaa7d..7946cb1 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
 	help
 	  Choose this option to enable HDCP state machine
 
+config DRM_MSM_DP
+	bool "Enable DP support in MSM DRM driver"
+	depends on DRM_MSM
+	default n
+	help
+	  Compile in support for DP driver in msm drm driver. DP external
+	  display support is enabled through this config option. It can
+	  be primary or secondary display on device.
+
 config DRM_MSM_DSI
 	bool "Enable DSI support in MSM DRM driver"
 	depends on DRM_MSM
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 1579cf0..5939f41 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -2,6 +2,7 @@
 ccflags-y := -I $(srctree)/$(src)
 ccflags-y += -I $(srctree)/$(src)/disp/dpu1
 ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
+ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -96,8 +97,20 @@ msm-y := \
 
 msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
 
+
 msm-$(CONFIG_DRM_MSM_GPU_STATE)	+= adreno/a6xx_gpu_state.o
 
+msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
+	dp/dp_catalog.o \
+	dp/dp_ctrl.o \
+	dp/dp_display.o \
+	dp/dp_drm.o \
+	dp/dp_extcon.o \
+	dp/dp_link.o \
+	dp/dp_panel.o \
+	dp/dp_parser.o \
+	dp/dp_power.o
+
 msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f96e142..29ac7d3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 
 	trace_dpu_enc_mode_set(DRMID(drm_enc));
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
+		msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
+
 	list_for_each_entry(conn_iter, connector_list, head)
 		if (conn_iter->encoder == drm_enc)
 			conn = conn_iter;
@@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
 	int ret = 0;
+	struct msm_drm_private *priv;
 	struct drm_display_mode *cur_mode = NULL;
 
 	if (!drm_enc) {
@@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	mutex_lock(&dpu_enc->enc_lock);
 	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
+	priv = drm_enc->dev->dev_private;
 
 	trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
 			     cur_mode->vdisplay);
@@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 
 	_dpu_encoder_virt_enable_helper(drm_enc);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		ret = msm_dp_display_enable(priv->dp,
+						drm_enc);
+		if (ret) {
+			DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
+				ret);
+			goto out;
+		}
+	}
 	dpu_enc->enabled = true;
 
 out:
@@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
 	priv = drm_enc->dev->dev_private;
 	dpu_kms = to_dpu_kms(priv->kms);
 
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
+		if (msm_dp_display_disable(priv->dp, drm_enc)) {
+			DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
+			return;
+		  }
+	}
 	trace_dpu_enc_disable(DRMID(drm_enc));
 
 	/* wait for idle */
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
new file mode 100644
index 0000000..a6bb52a
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+
+#include "dp_reg.h"
+#include "dp_aux.h"
+
+#define DP_AUX_ENUM_STR(x)		#x
+
+struct dp_aux_private {
+	struct device *dev;
+	struct dp_aux dp_aux;
+	struct dp_catalog *catalog;
+
+	struct mutex mutex;
+	struct completion comp;
+
+	u32 aux_error_num;
+	u32 retry_cnt;
+	bool cmd_busy;
+	bool native;
+	bool read;
+	bool no_send_addr;
+	bool no_send_stop;
+	u32 offset;
+	u32 segment;
+	u32 isr;
+
+	struct drm_dp_aux drm_aux;
+};
+
+static char *dp_aux_get_error(u32 aux_error)
+{
+	switch (aux_error) {
+	case DP_AUX_ERR_NONE:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
+	case DP_AUX_ERR_ADDR:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
+	case DP_AUX_ERR_TOUT:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
+	case DP_AUX_ERR_NACK:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
+	case DP_AUX_ERR_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
+	case DP_AUX_ERR_NACK_DEFER:
+		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
+	default:
+		return "unknown";
+	}
+}
+
+static u32 dp_aux_write(struct dp_aux_private *aux,
+			struct drm_dp_aux_msg *msg)
+{
+	u32 data[4], reg, len;
+	u8 *msgdata = msg->buffer;
+	int const aux_cmd_fifo_len = 128;
+	int i = 0;
+
+	if (aux->read)
+		len = 4;
+	else
+		len = msg->size + 4;
+
+	/*
+	 * cmd fifo only has depth of 144 bytes
+	 * limit buf length to 128 bytes here
+	 */
+	if (len > aux_cmd_fifo_len) {
+		DRM_ERROR("buf len error\n");
+		return 0;
+	}
+
+	/* Pack cmd and write to HW */
+	data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
+	if (aux->read)
+		data[0] |=  BIT(4); /* R/W */
+
+	data[1] = (msg->address >> 8) & 0xff;	/* addr[15:8] */
+	data[2] = msg->address & 0xff;		/* addr[7:0] */
+	data[3] = (msg->size - 1) & 0xff;	/* len[7:0] */
+
+	for (i = 0; i < len; i++) {
+		reg = (i < 4) ? data[i] : msgdata[i - 4];
+		/* index = 0, write */
+		reg = (((reg) << DP_AUX_DATA_OFFSET)
+		       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
+		if (i == 0)
+			reg |= DP_AUX_DATA_INDEX_WRITE;
+		aux->catalog->aux_data = reg;
+		dp_catalog_aux_write_data(aux->catalog);
+	}
+
+	dp_catalog_aux_clear_trans(aux->catalog, false);
+
+	reg = 0; /* Transaction number == 1 */
+	if (!aux->native) { /* i2c */
+		reg |= DP_AUX_TRANS_CTRL_I2C;
+
+		if (aux->no_send_addr)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
+
+		if (aux->no_send_stop)
+			reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
+	}
+
+	reg |= DP_AUX_TRANS_CTRL_GO;
+	aux->catalog->aux_data = reg;
+	dp_catalog_aux_write_trans(aux->catalog);
+
+	return len;
+}
+
+static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
+			      struct drm_dp_aux_msg *msg)
+{
+	u32 ret = 0, len = 0, timeout;
+	int const aux_timeout_ms = HZ/4;
+
+	reinit_completion(&aux->comp);
+
+	len = dp_aux_write(aux, msg);
+	if (len == 0) {
+		DRM_ERROR("DP AUX write failed\n");
+		return -EINVAL;
+	}
+
+	timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
+	if (!timeout) {
+		DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
+		return -ETIMEDOUT;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		ret = len;
+	} else {
+		DRM_ERROR_RATELIMITED("aux err: %s\n",
+			dp_aux_get_error(aux->aux_error_num));
+
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
+		struct drm_dp_aux_msg *msg)
+{
+	u32 data;
+	u8 *dp;
+	u32 i, actual_i;
+	u32 len = msg->size;
+
+	dp_catalog_aux_clear_trans(aux->catalog, true);
+
+	data = 0;
+	data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
+	data |= DP_AUX_DATA_READ;  /* read */
+
+	aux->catalog->aux_data = data;
+	dp_catalog_aux_write_data(aux->catalog);
+
+	dp = msg->buffer;
+
+	/* discard first byte */
+	data = dp_catalog_aux_read_data(aux->catalog);
+
+	for (i = 0; i < len; i++) {
+		data = dp_catalog_aux_read_data(aux->catalog);
+		*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
+
+		actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
+		if (i != actual_i)
+			pr_warn("Index mismatch: expected %d, found %d\n",
+				i, actual_i);
+	}
+}
+
+static void dp_aux_native_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE)
+		aux->aux_error_num = DP_AUX_ERR_NONE;
+	else if (isr & DP_INTR_WRONG_ADDR)
+		aux->aux_error_num = DP_AUX_ERR_ADDR;
+	else if (isr & DP_INTR_TIMEOUT)
+		aux->aux_error_num = DP_AUX_ERR_TOUT;
+	if (isr & DP_INTR_NACK_DEFER)
+		aux->aux_error_num = DP_AUX_ERR_NACK;
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_i2c_handler(struct dp_aux_private *aux)
+{
+	u32 isr = aux->isr;
+
+	if (isr & DP_INTR_AUX_I2C_DONE) {
+		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		else
+			aux->aux_error_num = DP_AUX_ERR_NONE;
+	} else {
+		if (isr & DP_INTR_WRONG_ADDR)
+			aux->aux_error_num = DP_AUX_ERR_ADDR;
+		else if (isr & DP_INTR_TIMEOUT)
+			aux->aux_error_num = DP_AUX_ERR_TOUT;
+		if (isr & DP_INTR_NACK_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
+		if (isr & DP_INTR_I2C_NACK)
+			aux->aux_error_num = DP_AUX_ERR_NACK;
+		if (isr & DP_INTR_I2C_DEFER)
+			aux->aux_error_num = DP_AUX_ERR_DEFER;
+	}
+
+	complete(&aux->comp);
+}
+
+static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
+					     struct drm_dp_aux_msg *input_msg)
+{
+	u32 const edid_address = 0x50;
+	u32 const segment_address = 0x30;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	u8 *data = NULL;
+
+	if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
+		(input_msg->address != segment_address)))
+		return;
+
+
+	data = input_msg->buffer;
+	if (input_msg->address == segment_address)
+		aux->segment = *data;
+	else
+		aux->offset = *data;
+}
+
+/**
+ * dp_aux_transfer_helper() - helper function for EDID read transactions
+ *
+ * @aux: DP AUX private structure
+ * @input_msg: input message from DRM upstream APIs
+ *
+ * return: void
+ *
+ * This helper function is used to fix EDID reads for non-compliant
+ * sinks that do not handle the i2c middle-of-transaction flag correctly.
+ */
+static void dp_aux_transfer_helper(struct dp_aux_private *aux,
+				   struct drm_dp_aux_msg *input_msg)
+{
+	struct drm_dp_aux_msg helper_msg;
+	u32 const message_size = 0x10;
+	u32 const segment_address = 0x30;
+	bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
+	bool i2c_read = input_msg->request &
+		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+
+	if (!i2c_mot || !i2c_read || (input_msg->size == 0))
+		return;
+
+	aux->read = false;
+	aux->cmd_busy = true;
+	aux->no_send_addr = true;
+	aux->no_send_stop = true;
+
+	/*
+	 * Send the segment address for every i2c read in which the
+	 * middle-of-tranaction flag is set. This is required to support EDID
+	 * reads of more than 2 blocks as the segment address is reset to 0
+	 * since we are overriding the middle-of-transaction flag for read
+	 * transactions.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = segment_address;
+	helper_msg.buffer = &aux->segment;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+
+	/*
+	 * Send the offset address for every i2c read in which the
+	 * middle-of-transaction flag is set. This will ensure that the sink
+	 * will update its read pointer and return the correct portion of the
+	 * EDID buffer in the subsequent i2c read trasntion triggered in the
+	 * native AUX transfer function.
+	 */
+	memset(&helper_msg, 0, sizeof(helper_msg));
+	helper_msg.address = input_msg->address;
+	helper_msg.buffer = &aux->offset;
+	helper_msg.size = 1;
+	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+	aux->offset += message_size;
+
+	if (aux->offset == 0x80 || aux->offset == 0x100)
+		aux->segment = 0x0; /* reset segment at end of block */
+}
+
+/*
+ * This function does the real job to process an AUX transaction.
+ * It will call aux_reset() function to reset the AUX channel,
+ * if the waiting is timeout.
+ */
+static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	ssize_t ret;
+	int const aux_cmd_native_max = 16;
+	int const aux_cmd_i2c_max = 128;
+	int const retry_count = 5;
+	struct dp_aux_private *aux = container_of(drm_aux,
+		struct dp_aux_private, drm_aux);
+
+	mutex_lock(&aux->mutex);
+
+	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+
+	/* Ignore address only message */
+	if ((msg->size == 0) || (msg->buffer == NULL)) {
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+		ret = msg->size;
+		goto unlock_exit;
+	}
+
+	/* msg sanity check */
+	if ((aux->native && (msg->size > aux_cmd_native_max)) ||
+		(msg->size > aux_cmd_i2c_max)) {
+		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
+			__func__, msg->size, msg->request);
+		ret = -EINVAL;
+		goto unlock_exit;
+	}
+
+	dp_aux_update_offset_and_segment(aux, msg);
+	dp_aux_transfer_helper(aux, msg);
+
+	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	aux->cmd_busy = true;
+
+	if (aux->read) {
+		aux->no_send_addr = true;
+		aux->no_send_stop = false;
+	} else {
+		aux->no_send_addr = true;
+		aux->no_send_stop = true;
+	}
+
+	ret = dp_aux_cmd_fifo_tx(aux, msg);
+	if ((ret < 0) && aux->native) {
+		aux->retry_cnt++;
+		if (!(aux->retry_cnt % retry_count))
+			dp_catalog_aux_update_cfg(aux->catalog,
+				aux->dp_aux.cfg, PHY_AUX_CFG1);
+		dp_catalog_aux_reset(aux->catalog);
+		goto unlock_exit;
+	} else if (ret < 0) {
+		goto unlock_exit;
+	}
+
+	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
+		if (aux->read)
+			dp_aux_cmd_fifo_rx(aux, msg);
+
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+	} else {
+		/* Reply defer to retry */
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+	}
+
+	/* Return requested size for success or retry */
+	ret = msg->size;
+	aux->retry_cnt = 0;
+
+unlock_exit:
+	aux->cmd_busy = false;
+	mutex_unlock(&aux->mutex);
+	return ret;
+}
+
+static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg *aux_cfg)
+{
+	int i = 0;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++)
+		aux_cfg[i].current_index = 0;
+}
+
+void dp_aux_isr(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->isr = dp_catalog_aux_get_irq(aux->catalog);
+
+	if (!aux->cmd_busy)
+		return;
+
+	if (aux->native)
+		dp_aux_native_handler(aux);
+	else
+		dp_aux_i2c_handler(aux);
+}
+
+void dp_aux_reconfig(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_update_cfg(aux->catalog,
+			dp_aux->cfg, PHY_AUX_CFG1);
+	dp_catalog_aux_reset(aux->catalog);
+}
+
+void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_aux_reset_phy_config_indices(aux_cfg);
+	dp_catalog_aux_setup(aux->catalog, aux_cfg);
+	dp_catalog_aux_reset(aux->catalog);
+	dp_catalog_aux_enable(aux->catalog, true);
+	aux->retry_cnt = 0;
+}
+
+void dp_aux_deinit(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	dp_catalog_aux_enable(aux->catalog, false);
+}
+
+int dp_aux_register(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+	int ret = 0;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->drm_aux.name = "dpu_dp_aux";
+	aux->drm_aux.dev = aux->dev;
+	aux->drm_aux.transfer = dp_aux_transfer;
+	ret = drm_dp_aux_register(&aux->drm_aux);
+	if (ret) {
+		DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
+		goto exit;
+	}
+	dp_aux->drm_aux = &aux->drm_aux;
+exit:
+	return ret;
+}
+
+void dp_aux_unregister(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+	drm_dp_aux_unregister(&aux->drm_aux);
+}
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg)
+{
+	int rc = 0;
+	struct dp_aux_private *aux;
+	struct dp_aux *dp_aux;
+
+	if (!catalog || !aux_cfg) {
+		DRM_ERROR("invalid input\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
+	if (!aux) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&aux->comp);
+	aux->cmd_busy = false;
+	mutex_init(&aux->mutex);
+
+	aux->dev = dev;
+	aux->catalog = catalog;
+	aux->dp_aux.cfg = aux_cfg;
+	dp_aux = &aux->dp_aux;
+	aux->retry_cnt = 0;
+
+	return dp_aux;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_aux_put(struct dp_aux *dp_aux)
+{
+	struct dp_aux_private *aux;
+
+	if (!dp_aux)
+		return;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	mutex_destroy(&aux->mutex);
+
+	devm_kfree(aux->dev, aux);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
new file mode 100644
index 0000000..8ce2221
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_aux.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_AUX_H_
+#define _DP_AUX_H_
+
+#include "dp_catalog.h"
+#include <drm/drm_dp_helper.h>
+
+enum dp_aux_error {
+	DP_AUX_ERR_NONE	= 0,
+	DP_AUX_ERR_ADDR	= -1,
+	DP_AUX_ERR_TOUT	= -2,
+	DP_AUX_ERR_NACK	= -3,
+	DP_AUX_ERR_DEFER	= -4,
+	DP_AUX_ERR_NACK_DEFER	= -5,
+};
+
+struct dp_aux {
+	struct drm_dp_aux *drm_aux;
+	struct dp_aux_cfg *cfg;
+};
+
+int dp_aux_register(struct dp_aux *aux);
+void dp_aux_unregister(struct dp_aux *aux);
+void dp_aux_isr(struct dp_aux *aux);
+void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
+void dp_aux_deinit(struct dp_aux *aux);
+void dp_aux_reconfig(struct dp_aux *aux);
+
+struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
+			  struct dp_aux_cfg *aux_cfg);
+void dp_aux_put(struct dp_aux *aux);
+
+#endif /*__DP_AUX_H_*/
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
new file mode 100644
index 0000000..51e21bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -0,0 +1,841 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <drm/drm_dp_helper.h>
+
+#include "dp_catalog.h"
+#include "dp_reg.h"
+
+#define POLLING_SLEEP_US			1000
+#define POLLING_TIMEOUT_US			10000
+
+#define REFTIMER_DEFAULT_VALUE			0x20000
+#define SCRAMBLER_RESET_COUNT_VALUE		0xFC
+
+#define DP_INTERRUPT_STATUS_ACK_SHIFT	1
+#define DP_INTERRUPT_STATUS_MASK_SHIFT	2
+
+#define DP_INTERRUPT_STATUS1 \
+	(DP_INTR_AUX_I2C_DONE| \
+	DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
+	DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
+	DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
+	DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
+
+#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+#define DP_INTERRUPT_STATUS2 \
+	(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
+	DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
+
+#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_ACK_SHIFT)
+#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_MASK_SHIFT)
+
+static u8 const vm_pre_emphasis[4][4] = {
+	{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
+	{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
+	{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
+	{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static u8 const vm_voltage_swing[4][4] = {
+	{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
+	{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
+	{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
+	{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
+};
+
+struct dp_catalog_private {
+	struct device *dev;
+	struct dp_io *io;
+	struct dp_catalog dp_catalog;
+};
+
+static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_aux.base + offset);
+}
+
+static inline void dp_write_aux(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure aux reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_aux.base + offset);
+}
+
+static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_ahb.base + offset);
+}
+
+static inline void dp_write_ahb(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_ahb.base + offset);
+}
+
+static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_cc_io.base + offset);
+}
+
+static inline void dp_write_phy(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure phy reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->phy_io.base + offset);
+}
+
+static inline void dp_write_pll(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
+}
+
+static inline void dp_write_ln_tx0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
+}
+
+static inline void dp_write_ln_tx1(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
+}
+
+static inline void dp_write_usb_cm(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure usb reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->usb3_dp_com.base + offset);
+}
+
+static inline void dp_write_p0(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure interface reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_p0.base + offset);
+}
+
+static inline u32 dp_read_link(struct dp_catalog_private *catalog, u32 offset)
+{
+	return readl_relaxed(catalog->io->dp_link.base + offset);
+}
+
+static inline void dp_write_link(struct dp_catalog_private *catalog,
+			       u32 offset, u32 data)
+{
+	/*
+	 * To make sure link reg writes happens before any other operation,
+	 * this function uses writel() instread of writel_relaxed()
+	 */
+	writel(data, catalog->io->dp_link.base + offset);
+}
+
+/* aux related catalog functions */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_aux(catalog, REG_DP_AUX_DATA);
+}
+
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
+{
+	int rc = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
+	return rc;
+}
+
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read)
+{
+	int rc = 0;
+	u32 data = 0;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (read) {
+		data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
+		data &= ~DP_AUX_TRANS_CTRL_GO;
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
+	} else {
+		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
+	}
+	return rc;
+}
+
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	aux_ctrl |= DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	aux_ctrl &= ~DP_AUX_CTRL_RESET;
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable)
+{
+	u32 aux_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
+
+	if (enable) {
+		dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
+		dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
+		aux_ctrl |= DP_AUX_CTRL_ENABLE;
+	} else {
+		aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
+	}
+
+	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
+}
+
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 new_index = 0, current_index = 0;
+
+	if (type >= PHY_AUX_CFG_MAX) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	current_index = cfg[type].current_index;
+	new_index = (current_index + 1) % cfg[type].cfg_cnt;
+	DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
+		dp_phy_aux_config_type_to_string(type),
+	cfg[type].lut[current_index], cfg[type].lut[new_index]);
+
+	dp_write_phy(catalog, cfg[type].offset,
+			cfg[type].lut[new_index]);
+	cfg[type].current_index = new_index;
+}
+
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+		struct dp_aux_cfg *cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	int i = 0;
+
+	dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
+		DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+		DP_PHY_PD_CTL_DP_CLAMP_EN);
+
+	/* Turn on BIAS current for PHY/PLL */
+	dp_write_pll(catalog,
+		QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
+		QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
+		QSERDES_COM_EN_SYSCLK_TX_SEL);
+
+	/* DP AUX CFG register programming */
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
+			dp_phy_aux_config_type_to_string(i),
+			cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
+		dp_write_phy(catalog, cfg[i].offset,
+			cfg[i].lut[cfg[i].current_index]);
+	}
+
+	dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK, PHY_AUX_STOP_ERR_MASK |
+			PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
+			PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
+}
+
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
+	intr &= ~DP_INTERRUPT_STATUS1_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS1) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack | DP_INTERRUPT_STATUS1_MASK);
+
+	return intr;
+
+}
+
+/* controller related catalog functions */
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
+	dp_write_link(catalog, REG_DP_TU, dp_tu);
+	dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
+}
+
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_STATE_CTRL, state);
+}
+
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 cfg)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
+
+	dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
+}
+
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
+	u32 ln_mapping;
+
+	ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
+	ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
+	ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
+	ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
+
+	dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING, ln_mapping);
+}
+
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	u32 mainlink_ctrl;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (enable) {
+		/*
+		* To make sure link reg writes happens before any other operation,
+		* dp_write_link() function uses writel() instread of writel_relaxed()
+		*/
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
+					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
+	} else {
+		mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
+		mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
+		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
+	}
+}
+
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
+					u32 colorimetry_cfg, u32 test_bits_depth)
+{
+	u32 misc_val;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
+	misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
+	misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
+	/* Configure clock to synchronous mode */
+	misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
+
+	DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
+	dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
+}
+
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
+					u32 rate, u32 stream_rate_khz,
+					bool fixed_nvid)
+{
+	u32 pixel_m, pixel_n;
+	u32 mvid, nvid;
+	u64 mvid_calc;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (fixed_nvid) {
+		nvid = DP_LINK_CONSTANT_N_VALUE;
+		DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
+
+		/*
+		 * For intermediate results, use 64 bit arithmetic to avoid
+		 * loss of precision.
+		 */
+		mvid_calc = (u64) stream_rate_khz * nvid;
+		mvid_calc = div_u64(mvid_calc, rate);
+
+		/*
+		 * truncate back to 32 bits as this final divided value will
+		 * always be within the range of a 32 bit unsigned int.
+		 */
+		mvid = (u32) mvid_calc;
+		DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
+			rate, stream_rate_khz);
+	} else {
+		pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
+		pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
+		DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
+
+		mvid = (pixel_m & 0xFFFF) * 5;
+		nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
+
+		DRM_DEBUG_DP("rate = %d\n", rate);
+
+		switch (drm_dp_link_rate_to_bw_code(rate)) {
+		case DP_LINK_BW_5_4:
+			nvid *= 2;
+			break;
+		case DP_LINK_BW_8_1:
+			nvid *= 3;
+			break;
+		default:
+			break;
+		}
+	}
+
+	DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
+	dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
+}
+
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
+					u32 pattern)
+{
+	int bit, ret;
+	u32 data;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	bit = BIT(pattern - 1);
+	DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
+	dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
+
+	bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl, catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & bit,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
+		return ret;
+	}
+	return 0;
+}
+
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 typec_ctrl;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
+			USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
+			USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
+						USB3_DP_COM_PHY_MODE_DP);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
+						USB3_DP_COM_SW_RESET_SET);
+
+	/* Default configuration i.e CC1 */
+	typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
+	if (flip)
+		typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
+
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
+						USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
+	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
+
+}
+
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
+{
+	u32 sw_reset;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
+
+	sw_reset |= DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+
+	sw_reset &= ~DP_SW_RESET;
+	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
+}
+
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
+{
+	u32 data;
+	int ret;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	/* Poll for mainlink ready status */
+	ret = readx_poll_timeout(readl,
+				 catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
+				 data, data & DP_MAINLINK_READY_FOR_VIDEO,
+				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
+	if (ret < 0) {
+		DRM_ERROR("mainlink not ready\n");
+		return false;
+	}
+
+	return true;
+}
+
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
+						bool enable)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	void __iomem *base;
+
+	base = catalog->io->dp_ahb.base;
+
+	if (enable) {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, DP_INTERRUPT_STATUS1_MASK);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, DP_INTERRUPT_STATUS2_MASK);
+	} else {
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
+		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
+	}
+}
+
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool en)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	if (en) {
+		u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
+
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
+				DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
+				DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
+		dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
+				DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
+				DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
+
+		/* Configure REFTIMER */
+		reftimer |= REFTIMER_DEFAULT_VALUE;
+		dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
+		/* Enable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
+	} else {
+		/* Disable HPD */
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
+	}
+}
+
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 intr, intr_ack;
+
+	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
+	intr &= ~DP_INTERRUPT_STATUS2_MASK;
+	intr_ack = (intr & DP_INTERRUPT_STATUS2) << DP_INTERRUPT_STATUS_ACK_SHIFT;
+	dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack | DP_INTERRUPT_STATUS2_MASK);
+
+	return intr;
+}
+
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL,
+			DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
+	usleep_range(1000, 1100); /* h/w recommended delay */
+	dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
+}
+
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
+		bool flipped, u8 ln_cnt)
+{
+	u32 info;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 orientation = BIT(!!flipped);
+
+	info = ln_cnt & DP_PHY_SPARE0_MASK;
+	info |= (orientation & DP_PHY_SPARE0_MASK) << DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
+	DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
+
+	dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
+}
+
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
+		u8 v_level, u8 p_level)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u8 voltage_swing_cfg, pre_emphasis_cfg;
+
+	DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
+
+	voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
+	pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
+
+	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
+		DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
+			v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
+		return -EINVAL;
+	}
+
+	/* Enable MUX to use Cursor values from these registers */
+	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+	/* Configure host and panel only if both values are allowed */
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
+	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
+	DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
+			voltage_swing_cfg, pre_emphasis_cfg);
+
+	return 0;
+}
+
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+			u32 pattern)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 value = 0x0;
+
+	/* Make sure to clear the current pattern before starting a new one */
+	dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
+
+	switch (pattern) {
+	case DP_LINK_QUAL_PATTERN_D10_2:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
+		return;
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
+		return;
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
+		/* 00111110000011111000001111100000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0, 0x3E0F83E0);
+		/* 00001111100000111110000011111000 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1, 0x0F83E0F8);
+		/* 1111100000111110 */
+		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2, 0x0000F83E);
+		return;
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+		value &= ~DP_HBR2_ERM_PATTERN;
+		if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
+			value = DP_HBR2_ERM_PATTERN;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		value |= SCRAMBLER_RESET_COUNT_VALUE;
+		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
+		dp_write_link(catalog, REG_DP_MAINLINK_LEVELS, DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
+		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
+		return;
+	default:
+		DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
+		return;
+	}
+}
+
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return dp_read_link(catalog, REG_DP_MAINLINK_READY);
+}
+
+/* panel related catalog functions */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
+	dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC, dp_catalog->sync_start);
+	dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY, dp_catalog->width_blanking);
+	dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
+	return 0;
+}
+
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+	u32 hsync_period, vsync_period;
+	u32 display_v_start, display_v_end;
+	u32 hsync_start_x, hsync_end_x;
+	u32 v_sync_width;
+	u32 hsync_ctl;
+	u32 display_hctl;
+
+	/* TPG config parameters*/
+	hsync_period = drm_mode->htotal;
+	vsync_period = drm_mode->vtotal;
+
+	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
+					hsync_period);
+	display_v_end = ((vsync_period - drm_mode->vsync_start -
+					drm_mode->vdisplay) * hsync_period) - 1;
+
+	display_v_start += drm_mode->htotal - drm_mode->hsync_start;
+	display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
+
+	hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
+	hsync_end_x = hsync_period - drm_mode->hsync_start -
+					drm_mode->hdisplay - 1;
+
+	v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
+
+	hsync_ctl = (hsync_period << 16) |
+			(drm_mode->hsync_end - drm_mode->hsync_start);
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+
+	dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
+	dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width *
+			hsync_period);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
+	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
+	dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, DP_TPG_CHECKERED_RECT_PATTERN);
+	dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
+					DP_TPG_VIDEO_CONFIG_BPP_8BIT |
+					DP_TPG_VIDEO_CONFIG_RGB);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, DP_TIMING_ENGINE_EN_EN);
+	DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
+}
+
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
+	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
+	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
+	return;
+}
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io)
+{
+	int rc = 0;
+	struct dp_catalog *dp_catalog;
+	struct dp_catalog_private *catalog;
+
+	if (!io) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
+	if (!catalog) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	catalog->dev = dev;
+	catalog->io = io;
+
+	dp_catalog = &catalog->dp_catalog;
+
+	return dp_catalog;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_catalog_put(struct dp_catalog *dp_catalog)
+{
+	struct dp_catalog_private *catalog;
+
+	if (!dp_catalog)
+		return;
+
+	catalog = container_of(dp_catalog, struct dp_catalog_private,
+				dp_catalog);
+
+	devm_kfree(catalog->dev, catalog);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
new file mode 100644
index 0000000..51c82dd
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CATALOG_H_
+#define _DP_CATALOG_H_
+
+#include "dp_parser.h"
+
+/* interrupts */
+#define DP_INTR_HPD		BIT(0)
+#define DP_INTR_AUX_I2C_DONE	BIT(3)
+#define DP_INTR_WRONG_ADDR	BIT(6)
+#define DP_INTR_TIMEOUT		BIT(9)
+#define DP_INTR_NACK_DEFER	BIT(12)
+#define DP_INTR_WRONG_DATA_CNT	BIT(15)
+#define DP_INTR_I2C_NACK	BIT(18)
+#define DP_INTR_I2C_DEFER	BIT(21)
+#define DP_INTR_PLL_UNLOCKED	BIT(24)
+#define DP_INTR_AUX_ERROR	BIT(27)
+
+#define DP_INTR_READY_FOR_VIDEO		BIT(0)
+#define DP_INTR_IDLE_PATTERN_SENT	BIT(3)
+#define DP_INTR_FRAME_END		BIT(6)
+#define DP_INTR_CRC_UPDATED		BIT(9)
+
+struct dp_catalog {
+	u32 aux_data;
+	u32 total;
+	u32 sync_start;
+	u32 width_blanking;
+	u32 dp_active;
+};
+
+/* AUX APIs */
+u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read);
+void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
+void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
+			struct dp_aux_cfg *aux_cfg);
+int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
+
+/* DP Controller APIs */
+void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
+void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 config);
+void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32 cc, u32 tb);
+void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32 rate,
+				u32 stream_rate_khz, bool fixed_nvid);
+int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32 pattern);
+void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip);
+bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool enable);
+void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool flipped,
+				u8 lane_cnt);
+int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8 v_level,
+				u8 p_level);
+int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
+void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
+				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
+void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
+				u32 pattern);
+u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
+
+/* DP Panel APIs */
+int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
+void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
+				struct drm_display_mode *drm_mode);
+void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
+
+struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io);
+void dp_catalog_put(struct dp_catalog *catalog);
+
+#endif /* _DP_CATALOG_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
new file mode 100644
index 0000000..a4575ea
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/types.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <drm/drm_fixed.h>
+
+#include "dp_reg.h"
+#include "dp_ctrl.h"
+
+#define DP_KHZ_TO_HZ 1000
+#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES	(30 * HZ / 1000) /* 30 ms */
+#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
+
+#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
+#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
+
+#define MR_LINK_TRAINING1  0x8
+#define MR_LINK_SYMBOL_ERM 0x80
+#define MR_LINK_PRBS7 0x100
+#define MR_LINK_CUSTOM80 0x200
+
+struct dp_tu_calc_input {
+	u64 lclk;        /* 162, 270, 540 and 810 */
+	u64 pclk_khz;    /* in KHz */
+	u64 hactive;     /* active h-width */
+	u64 hporch;      /* bp + fp + pulse */
+	int nlanes;      /* no.of.lanes */
+	int bpp;         /* bits */
+	int pixel_enc;   /* 444, 420, 422 */
+	int dsc_en;     /* dsc on/off */
+	int async_en;   /* async mode */
+};
+
+struct dp_vc_tu_mapping_table {
+	u8 valid_boundary_link;
+	u16 delay_start_link;
+	bool boundary_moderation_en;
+	u8 valid_lower_boundary_link;
+	u8 upper_boundary_count;
+	u8 lower_boundary_count;
+	u8 tu_size_minus1;
+};
+
+struct dp_ctrl_private {
+	struct dp_ctrl dp_ctrl;
+
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_panel *panel;
+	struct dp_link *link;
+	struct dp_power *power;
+	struct dp_parser *parser;
+	struct dp_catalog *catalog;
+
+	struct completion idle_comp;
+	struct mutex push_idle_mutex;
+	struct completion video_comp;
+};
+
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_lock(&ctrl->push_idle_mutex);
+
+	reinit_completion(&ctrl->idle_comp);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
+
+	if (!wait_for_completion_timeout(&ctrl->idle_comp,
+			IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
+		pr_warn("PUSH_IDLE pattern timedout\n");
+
+	mutex_unlock(&ctrl->push_idle_mutex);
+	pr_debug("mainlink off done\n");
+}
+
+static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
+{
+	u32 config = 0, tbd;
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/* Default-> LSCLK DIV: 1/4 LCLK  */
+	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
+
+	/* Scrambler reset enable */
+	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
+		config |= DP_CONFIGURATION_CTRL_ASSR;
+
+	tbd = dp_link_get_test_bits_depth(ctrl->link,
+			ctrl->panel->dp_mode.bpp);
+
+	if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
+		pr_debug("BIT_DEPTH not set. Configure default\n");
+		tbd = DP_TEST_BIT_DEPTH_8;
+	}
+
+	config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
+
+	/* Num of Lanes */
+	config |= ((ctrl->link->link_params.num_lanes - 1)
+			<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
+
+	if (drm_dp_enhanced_frame_cap(dpcd))
+		config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
+
+	config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
+
+	/* sync clock & static Mvid */
+	config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
+	config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
+
+	dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
+}
+
+/**
+ * dp_ctrl_configure_source_params() - configures DP transmitter source params
+ * @ctrl: Display Port Driver data
+ *
+ * Configures the DP transmitter source params including details such as lane
+ * configuration, output format and sink/panel timing information.
+ */
+static void dp_ctrl_configure_source_params(struct dp_ctrl_private *ctrl)
+{
+	u32 cc, tb;
+
+	dp_catalog_ctrl_lane_mapping(ctrl->catalog);
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	tb = dp_link_get_test_bits_depth(ctrl->link,
+		ctrl->panel->dp_mode.bpp);
+	cc = dp_link_get_colorimetry_config(ctrl->link);
+	dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
+	dp_panel_timing_cfg(ctrl->panel);
+}
+
+/*
+ * The structure and few functions present below are IP/Hardware
+ * specific implementation. Most of the implementation will not
+ * have coding comments
+ */
+struct tu_algo_data {
+	s64 lclk_fp;
+	s64 pclk_fp;
+	s64 lwidth;
+	s64 hbp_relative_to_pclk;
+	int nlanes;
+	int bpp;
+	int pixelEnc;
+	int dsc_en;
+	int async_en;
+	int bpc;
+
+	uint delay_start_link_extra_pixclk;
+	int extra_buffer_margin;
+	s64 ratio_fp;
+	s64 original_ratio_fp;
+
+	s64 err_fp;
+	s64 n_err_fp;
+	s64 n_n_err_fp;
+	int tu_size;
+	int tu_size_desired;
+	int tu_size_minus1;
+
+	int valid_boundary_link;
+	s64 resulting_valid_fp;
+	s64 total_valid_fp;
+	s64 effective_valid_fp;
+	s64 effective_valid_recorded_fp;
+	int n_tus;
+	int n_tus_per_lane;
+	int paired_tus;
+	int remainder_tus;
+	int remainder_tus_upper;
+	int remainder_tus_lower;
+	int extra_bytes;
+	int filler_size;
+	int delay_start_link;
+
+	int extra_pclk_cycles;
+	int extra_pclk_cycles_in_link_clk;
+	s64 ratio_by_tu_fp;
+	s64 average_valid2_fp;
+	int new_valid_boundary_link;
+	int remainder_symbols_exist;
+	int n_symbols;
+	s64 n_remainder_symbols_per_lane_fp;
+	s64 last_partial_tu_fp;
+	s64 TU_ratio_err_fp;
+
+	int n_tus_incl_last_incomplete_tu;
+	int extra_pclk_cycles_tmp;
+	int extra_pclk_cycles_in_link_clk_tmp;
+	int extra_required_bytes_new_tmp;
+	int filler_size_tmp;
+	int lower_filler_size_tmp;
+	int delay_start_link_tmp;
+
+	bool boundary_moderation_en;
+	int boundary_mod_lower_err;
+	int upper_boundary_count;
+	int lower_boundary_count;
+	int i_upper_boundary_count;
+	int i_lower_boundary_count;
+	int valid_lower_boundary_link;
+	int even_distribution_BF;
+	int even_distribution_legacy;
+	int even_distribution;
+	int min_hblank_violated;
+	s64 delay_start_time_fp;
+	s64 hbp_time_fp;
+	s64 hactive_time_fp;
+	s64 diff_abs_fp;
+
+	s64 ratio;
+};
+
+static int _tu_param_compare(s64 a, s64 b)
+{
+	u32 a_int, a_frac;
+	u32 b_int, b_frac;
+
+	if (a == b)
+		return 0;
+
+	a_int = (a >> 32) & 0x7FFFFFFF;
+	a_frac = a & 0xFFFFFFFF;
+
+	b_int = (b >> 32) & 0x7FFFFFFF;
+	b_frac = b & 0xFFFFFFFF;
+
+	if (a_int > b_int)
+		return 1;
+	else if (a_int < b_int)
+		return 2;
+	else if (a_frac > b_frac)
+		return 1;
+	else
+		return 2;
+}
+
+static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
+{
+	s64 temp1_fp, temp2_fp, temp, temp1, temp2;
+	int compare_result_1, compare_result_2, compare_result_3;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+
+	tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp = (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link-1));
+	tu->average_valid2_fp = drm_fixp_from_fraction(temp,
+					(tu->i_upper_boundary_count +
+					tu->i_lower_boundary_count));
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+	tu->n_tus = drm_fixp2int(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu->n_remainder_symbols_per_lane_fp = temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	tu->last_partial_tu_fp =
+			drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
+					temp1_fp);
+
+	if (tu->n_remainder_symbols_per_lane_fp != 0)
+		tu->remainder_symbols_exist = 1;
+	else
+		tu->remainder_symbols_exist = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
+	tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
+
+	tu->paired_tus = (int)((tu->n_tus_per_lane) /
+					(tu->i_upper_boundary_count +
+					 tu->i_lower_boundary_count));
+
+	tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
+						(tu->i_upper_boundary_count +
+						tu->i_lower_boundary_count);
+
+	if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
+		tu->remainder_tus_upper = tu->i_upper_boundary_count;
+		tu->remainder_tus_lower = tu->remainder_tus -
+						tu->i_upper_boundary_count;
+	} else {
+		tu->remainder_tus_upper = tu->remainder_tus;
+		tu->remainder_tus_lower = 0;
+	}
+
+	temp = tu->paired_tus * (tu->i_upper_boundary_count *
+				tu->new_valid_boundary_link +
+				tu->i_lower_boundary_count *
+				(tu->new_valid_boundary_link - 1)) +
+				(tu->remainder_tus_upper *
+				 tu->new_valid_boundary_link) +
+				(tu->remainder_tus_lower *
+				(tu->new_valid_boundary_link - 1));
+	tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
+
+	if (tu->remainder_symbols_exist) {
+		temp1_fp = tu->total_valid_fp +
+				tu->n_remainder_symbols_per_lane_fp;
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp2_fp = temp2_fp + tu->last_partial_tu_fp;
+		temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	} else {
+		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
+		temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
+	}
+	tu->effective_valid_fp = temp1_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
+
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
+	tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
+
+	tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
+
+	if (temp2_fp)
+		tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu->n_tus_incl_last_incomplete_tu = 0;
+
+	temp1 = 0;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = tu->average_valid2_fp - temp2_fp;
+	temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		temp1 = drm_fixp2int_ceil(temp1_fp);
+
+	temp = tu->i_upper_boundary_count * tu->nlanes;
+	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
+	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp2_fp)
+		temp2 = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp2 = 0;
+	tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
+
+	temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
+	temp2_fp = drm_fixp_from_fraction(
+	tu->extra_required_bytes_new_tmp, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_tmp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
+	temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	if (temp1_fp)
+		tu->extra_pclk_cycles_in_link_clk_tmp =
+						drm_fixp2int_ceil(temp1_fp);
+	else
+		tu->extra_pclk_cycles_in_link_clk_tmp = 0;
+
+	tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
+
+	tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
+
+	tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
+					tu->lower_filler_size_tmp +
+					tu->extra_buffer_margin;
+
+	temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
+	tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu->n_n_err_fp, tu->diff_abs_fp);
+	if (compare_result_1 == 2)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
+	if (compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
+					tu->delay_start_time_fp);
+	if (compare_result_3 == 2)
+		compare_result_3 = 0;
+	else
+		compare_result_3 = 1;
+
+	if (((tu->even_distribution == 1) ||
+			((tu->even_distribution_BF == 0) &&
+			(tu->even_distribution_legacy == 0))) &&
+			tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
+			compare_result_2 &&
+			(compare_result_1 || (tu->min_hblank_violated == 1)) &&
+			(tu->new_valid_boundary_link - 1) > 0 &&
+			compare_result_3 &&
+			(tu->delay_start_link_tmp <= 1023)) {
+		tu->upper_boundary_count = tu->i_upper_boundary_count;
+		tu->lower_boundary_count = tu->i_lower_boundary_count;
+		tu->err_fp = tu->n_n_err_fp;
+		tu->boundary_moderation_en = true;
+		tu->tu_size_desired = tu->tu_size;
+		tu->valid_boundary_link = tu->new_valid_boundary_link;
+		tu->effective_valid_recorded_fp = tu->effective_valid_fp;
+		tu->even_distribution_BF = 1;
+		tu->delay_start_link = tu->delay_start_link_tmp;
+	} else if (tu->boundary_mod_lower_err == 0) {
+		compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
+							tu->diff_abs_fp);
+		if (compare_result_1 == 2)
+			tu->boundary_mod_lower_err = 1;
+	}
+}
+
+static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
+				   struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct tu_algo_data tu;
+	int compare_result_1, compare_result_2;
+	u64 temp = 0;
+	s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
+
+	s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006 */
+	s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
+	s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
+	s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
+
+	u8 DP_BRUTE_FORCE = 1;
+	s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1 */
+	uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
+	uint HBLANK_MARGIN = 4;
+
+	memset(&tu, 0, sizeof(tu));
+
+	tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
+	tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
+	tu.lwidth               = in->hactive;
+	tu.hbp_relative_to_pclk = in->hporch;
+	tu.nlanes               = in->nlanes;
+	tu.bpp                  = in->bpp;
+	tu.pixelEnc             = in->pixel_enc;
+	tu.dsc_en               = in->dsc_en;
+	tu.async_en             = in->async_en;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
+
+	if (tu.pixelEnc == 420) {
+		temp_fp = drm_fixp_from_fraction(2, 1);
+		tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
+		tu.lwidth /= 2;
+		tu.hbp_relative_to_pclk /= 2;
+	}
+
+	if (tu.pixelEnc == 422) {
+		switch (tu.bpp) {
+		case 24:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		case 30:
+			tu.bpp = 20;
+			tu.bpc = 10;
+			break;
+		default:
+			tu.bpp = 16;
+			tu.bpc = 8;
+			break;
+		}
+	} else {
+		tu.bpc = tu.bpp/3;
+	}
+
+	temp1_fp = drm_fixp_from_fraction(4, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
+	temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
+	tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
+
+	tu.original_ratio_fp = tu.ratio_fp;
+	tu.boundary_moderation_en = false;
+	tu.upper_boundary_count = 0;
+	tu.lower_boundary_count = 0;
+	tu.i_upper_boundary_count = 0;
+	tu.i_lower_boundary_count = 0;
+	tu.valid_lower_boundary_link = 0;
+	tu.even_distribution_BF = 0;
+	tu.even_distribution_legacy = 0;
+	tu.even_distribution = 0;
+	tu.delay_start_time_fp = 0;
+
+	tu.err_fp = drm_fixp_from_fraction(1000, 1);
+	tu.n_err_fp = 0;
+	tu.n_n_err_fp = 0;
+
+	tu.ratio = drm_fixp2int(tu.ratio_fp);
+	if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
+			!tu.ratio && tu.dsc_en == 0) {
+		tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
+		tu.ratio = drm_fixp2int(tu.ratio_fp);
+		if (tu.ratio)
+			tu.ratio_fp = drm_fixp_from_fraction(1, 1);
+	}
+
+	if (tu.ratio > 1)
+		tu.ratio = 1;
+
+	if (tu.ratio == 1)
+		goto tu_size_calc;
+
+	compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
+	if (!compare_result_1 || compare_result_1 == 1)
+		compare_result_1 = 1;
+	else
+		compare_result_1 = 0;
+
+	compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
+	if (!compare_result_2 || compare_result_2 == 2)
+		compare_result_2 = 1;
+	else
+		compare_result_2 = 0;
+
+	if (tu.dsc_en && compare_result_1 && compare_result_2) {
+		HBLANK_MARGIN += 4;
+		DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
+	}
+
+tu_size_calc:
+	for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+		temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
+		temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+		temp = drm_fixp2int_ceil(temp2_fp);
+		temp1_fp = drm_fixp_from_fraction(temp, 1);
+		tu.n_err_fp = temp1_fp - temp2_fp;
+
+		if (tu.n_err_fp < tu.err_fp) {
+			tu.err_fp = tu.n_err_fp;
+			tu.tu_size_desired = tu.tu_size;
+		}
+	}
+
+	tu.tu_size_minus1 = tu.tu_size_desired - 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+	tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
+	tu.n_tus = drm_fixp2int(temp2_fp);
+
+	tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
+	DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
+		tu.valid_boundary_link, tu.n_tus);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+	temp2_fp = temp1_fp - temp2_fp;
+	temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp2_fp);
+	if (temp && temp2_fp)
+		tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
+	else
+		tu.extra_bytes = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
+	temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
+	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles = 0;
+
+	temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+	temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
+	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+	temp = drm_fixp2int(temp1_fp);
+	if (temp && temp1_fp)
+		tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
+	else
+		tu.extra_pclk_cycles_in_link_clk = 0;
+
+	tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
+
+	tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
+				tu.filler_size + tu.extra_buffer_margin;
+
+	tu.resulting_valid_fp =
+			drm_fixp_from_fraction(tu.valid_boundary_link, 1);
+
+	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
+	temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+	tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+
+	temp1_fp = drm_fixp_from_fraction(
+			(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
+	tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
+					tu.delay_start_time_fp);
+	if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp) */
+		tu.min_hblank_violated = 1;
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
+
+	compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
+						tu.delay_start_time_fp);
+	if (compare_result_2 == 2)
+		tu.min_hblank_violated = 1;
+
+	tu.delay_start_time_fp = 0;
+
+	/* brute force */
+
+	tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
+	tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
+
+	temp = drm_fixp2int(tu.diff_abs_fp);
+	if (!temp && tu.diff_abs_fp <= 0xffff)
+		tu.diff_abs_fp = 0;
+
+	/* if(diff_abs < 0) diff_abs *= -1 */
+	if (tu.diff_abs_fp < 0)
+		tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
+
+	tu.boundary_mod_lower_err = 0;
+	if ((tu.diff_abs_fp != 0 &&
+			((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
+			 (tu.even_distribution_legacy == 0) ||
+			 (DP_BRUTE_FORCE == 1))) ||
+			(tu.min_hblank_violated == 1)) {
+		do {
+			tu.err_fp = drm_fixp_from_fraction(1000, 1);
+
+			temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
+			temp2_fp = drm_fixp_from_fraction(
+					tu.delay_start_link_extra_pixclk, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.extra_buffer_margin =
+					drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.extra_buffer_margin = 0;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+
+			if (temp1_fp)
+				tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
+			else
+				tu.n_symbols = 0;
+
+			for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
+				for (tu.i_upper_boundary_count = 1;
+					tu.i_upper_boundary_count <= 15;
+					tu.i_upper_boundary_count++) {
+					for (tu.i_lower_boundary_count = 1;
+						tu.i_lower_boundary_count <= 15;
+						tu.i_lower_boundary_count++) {
+						_tu_valid_boundary_calc(&tu);
+					}
+				}
+			}
+			tu.delay_start_link_extra_pixclk--;
+		} while (tu.boundary_moderation_en != true &&
+			tu.boundary_mod_lower_err == 1 &&
+			tu.delay_start_link_extra_pixclk != 0);
+
+		if (tu.boundary_moderation_en == true) {
+			temp1_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count *
+					tu.valid_boundary_link +
+					tu.lower_boundary_count *
+					(tu.valid_boundary_link - 1)), 1);
+			temp2_fp = drm_fixp_from_fraction(
+					(tu.upper_boundary_count +
+					tu.lower_boundary_count), 1);
+			tu.resulting_valid_fp =
+					drm_fixp_div(temp1_fp, temp2_fp);
+
+			temp1_fp = drm_fixp_from_fraction(
+					tu.tu_size_desired, 1);
+			tu.ratio_by_tu_fp =
+				drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+
+			tu.valid_lower_boundary_link =
+				tu.valid_boundary_link - 1;
+
+			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
+			temp2_fp = drm_fixp_div(temp1_fp,
+						tu.resulting_valid_fp);
+			tu.n_tus = drm_fixp2int(temp2_fp);
+
+			tu.tu_size_minus1 = tu.tu_size_desired - 1;
+			tu.even_distribution_BF = 1;
+
+			temp1_fp =
+				drm_fixp_from_fraction(tu.tu_size_desired, 1);
+			temp2_fp =
+				drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
+			tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
+		}
+	}
+
+	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
+	temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
+
+	if (temp2_fp)
+		temp = drm_fixp2int_ceil(temp2_fp);
+	else
+		temp = 0;
+
+	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
+	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
+	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
+	temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
+	temp1_fp = drm_fixp_from_fraction(temp, 1);
+	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
+	temp = drm_fixp2int(temp2_fp);
+
+	if (tu.async_en)
+		tu.delay_start_link += (int)temp;
+
+	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
+	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
+
+	/* OUTPUTS */
+	tu_table->valid_boundary_link       = tu.valid_boundary_link;
+	tu_table->delay_start_link          = tu.delay_start_link;
+	tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
+	tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
+	tu_table->upper_boundary_count      = tu.upper_boundary_count;
+	tu_table->lower_boundary_count      = tu.lower_boundary_count;
+	tu_table->tu_size_minus1            = tu.tu_size_minus1;
+
+	DRM_DEBUG_DP("TU: valid_boundary_link: %d\n", tu_table->valid_boundary_link);
+	DRM_DEBUG_DP("TU: delay_start_link: %d\n", tu_table->delay_start_link);
+	DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
+			tu_table->boundary_moderation_en);
+	DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
+			tu_table->valid_lower_boundary_link);
+	DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
+			tu_table->upper_boundary_count);
+	DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
+			tu_table->lower_boundary_count);
+	DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
+}
+
+static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
+		struct dp_vc_tu_mapping_table *tu_table)
+{
+	struct dp_tu_calc_input in;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &ctrl->panel->dp_mode.drm_mode;
+
+	in.lclk = ctrl->link->link_params.rate / 1000;
+	in.pclk_khz = drm_mode->clock;
+	in.hactive = drm_mode->hdisplay;
+	in.hporch = drm_mode->htotal - drm_mode->hdisplay;
+	in.nlanes = ctrl->link->link_params.num_lanes;
+	in.bpp = ctrl->panel->dp_mode.bpp;
+	in.pixel_enc = 444;
+	in.dsc_en = 0;
+	in.async_en = 0;
+
+	_dp_ctrl_calc_tu(&in, tu_table);
+}
+
+static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
+{
+	u32 dp_tu = 0x0;
+	u32 valid_boundary = 0x0;
+	u32 valid_boundary2 = 0x0;
+	struct dp_vc_tu_mapping_table tu_calc_table;
+
+	dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
+
+	dp_tu |= tu_calc_table.tu_size_minus1;
+	valid_boundary |= tu_calc_table.valid_boundary_link;
+	valid_boundary |= (tu_calc_table.delay_start_link << 16);
+
+	valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
+	valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
+	valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
+
+	if (tu_calc_table.boundary_moderation_en)
+		valid_boundary2 |= BIT(0);
+
+	pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
+			dp_tu, valid_boundary, valid_boundary2);
+
+	dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
+				dp_tu, valid_boundary, valid_boundary2);
+}
+
+static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!wait_for_completion_timeout(&ctrl->video_comp,
+				WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
+		DRM_ERROR("Link Train timedout\n");
+		ret = -ETIMEDOUT;
+	}
+	return ret;
+}
+
+static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
+{
+	struct dp_link *link = ctrl->link;
+	int ret = 0, lane, lane_cnt;
+	u8 buf[4];
+	u32 max_level_reached = 0;
+	u32 voltage_swing_level = link->phy_params.v_level;
+	u32 pre_emphasis_level = link->phy_params.p_level;
+
+	ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+		voltage_swing_level, pre_emphasis_level);
+	if (ret)
+		return ret;
+
+	if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("max. voltage swing level reached %d\n",
+				voltage_swing_level);
+		max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
+	}
+
+	if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
+				pre_emphasis_level);
+		max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+	}
+
+	pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	lane_cnt = ctrl->link->link_params.num_lanes;
+	for (lane = 0; lane < lane_cnt; lane++)
+		buf[lane] = voltage_swing_level | pre_emphasis_level | max_level_reached;
+
+	DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level | pre_emphasis_level);
+	ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET, buf, lane_cnt);
+	if (ret == lane_cnt)
+		ret = 0;
+
+	return ret;
+}
+
+static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
+		u8 pattern)
+{
+	u8 buf;
+	int ret = 0;
+
+	DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
+
+	buf = pattern;
+	ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET, buf);
+	return ret == 1;
+}
+
+static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
+				    u8 *link_status)
+{
+	int len = 0;
+	u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
+	u32 link_status_read_max_retries = 100;
+
+	while (--link_status_read_max_retries) {
+		len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
+			link_status);
+		if (len != DP_LINK_STATUS_SIZE) {
+			DRM_ERROR("DP link status read failed, err: %d\n", len);
+			return len;
+		}
+
+		if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
+{
+	int tries, old_v_level, ret = 0;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	int const maximum_retries = 5;
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, DP_TRAINING_PATTERN_1);
+	if (ret)
+		return ret;
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
+		DP_LINK_SCRAMBLING_DISABLE);
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	tries = 0;
+	old_v_level = ctrl->link->phy_params.v_level;
+	for (tries = 0; tries < maximum_retries; tries++) {
+		drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_clock_recovery_ok(link_status,
+			ctrl->link->link_params.num_lanes)) {
+			return ret;
+		}
+
+		if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+			DRM_ERROR_RATELIMITED("max v_level reached\n");
+			return -EAGAIN;
+		}
+
+		if (old_v_level != ctrl->link->phy_params.v_level) {
+			tries = 0;
+			old_v_level = ctrl->link->phy_params.v_level;
+		}
+
+		DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	DRM_ERROR("max tries reached\n");
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	switch (ctrl->link->link_params.rate) {
+	case 810000:
+		ctrl->link->link_params.rate = 540000;
+		break;
+	case 540000:
+		ctrl->link->link_params.rate = 270000;
+		break;
+	case 270000:
+	case 162000:
+	default:
+		ctrl->link->link_params.rate = 162000;
+		break;
+	};
+
+	DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
+
+	return ret;
+}
+
+static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
+{
+	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
+	drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+}
+
+static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
+{
+	int tries = 0, ret = 0;
+	char pattern;
+	int const maximum_retries = 5;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	if (drm_dp_tps3_supported(ctrl->panel->dpcd))
+		pattern = DP_TRAINING_PATTERN_3;
+	else
+		pattern = DP_TRAINING_PATTERN_2;
+
+	ret = dp_ctrl_update_vx_px(ctrl);
+	if (ret)
+		return ret;
+
+	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
+	if (ret)
+		return ret;
+
+	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
+
+	for (tries = 0; tries <= maximum_retries; tries++) {
+		drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+
+		ret = dp_ctrl_read_link_status(ctrl, link_status);
+		if (ret)
+			return ret;
+
+		if (drm_dp_channel_eq_ok(link_status,
+			ctrl->link->link_params.num_lanes))
+			return ret;
+
+		dp_link_adjust_levels(ctrl->link, link_status);
+		ret = dp_ctrl_update_vx_px(ctrl);
+		if (ret)
+			return ret;
+
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	u8 encoding = DP_SET_ANSI_8B10B;
+	struct drm_dp_link link_info = {0};
+
+	ctrl->link->phy_params.p_level = 0;
+	ctrl->link->phy_params.v_level = 0;
+
+	dp_ctrl_config_ctrl(ctrl);
+
+	ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
+	if (ret < 0) {
+		DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
+		dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+		return ret;
+	}
+
+	drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
+	drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
+				&encoding, 1);
+
+	ret = dp_ctrl_link_train_1(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #1 successful\n");
+
+	ret = dp_ctrl_link_training_2(ctrl);
+	if (ret) {
+		DRM_ERROR("link training #2 failed. ret=%d\n", ret);
+		goto end;
+	}
+
+	/* print success info as this is a result of user initiated action */
+	DRM_DEBUG_DP("link training #2 successful\n");
+
+end:
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
+
+	dp_ctrl_clear_training_pattern(ctrl);
+	return ret;
+}
+
+static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool train)
+{
+	bool mainlink_ready = false;
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
+
+	ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
+	if (ret)
+		return ret;
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		return ret;
+
+	if (train) {
+		/*
+		 * As part of previous calls, DP controller state might have
+		 * transitioned to PUSH_IDLE. In order to start transmitting a link
+		 * training pattern, we have to first do a DP software reset.
+		 */
+		dp_catalog_ctrl_reset(ctrl->catalog);
+
+		ret = dp_ctrl_link_train(ctrl);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Set up transfer unit values and set controller state to send
+	 * video.
+	 */
+	dp_ctrl_setup_tr_unit(ctrl);
+	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
+
+	ret = dp_ctrl_wait4video_ready(ctrl);
+	if (ret)
+		return ret;
+
+	mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
+	DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT READY");
+	return ret;
+}
+
+static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
+				   char *name, u32 rate)
+{
+	u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
+	struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
+
+	if (num)
+		cfg->rate = rate;
+	else
+		DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
+}
+
+static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_power_set_link_clk_parent(ctrl->power);
+	dp_power_set_pixel_clk_parent(ctrl->power);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk", ctrl->link->link_params.rate);
+
+	dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk", ctrl->dp_ctrl.pixel_rate);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
+	if (ret)
+		DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
+
+	return ret;
+}
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return -EINVAL;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	ctrl->dp_ctrl.orientation = flip;
+
+	dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
+	dp_catalog_ctrl_phy_reset(ctrl->catalog);
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
+
+	return 0;
+}
+
+/**
+ * dp_ctrl_host_deinit() - Uninitialize DP controller
+ * @ctrl: Display Port Driver data
+ *
+ * Perform required steps to uninitialize DP controller
+ * and its resources.
+ */
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("Invalid input data\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+
+	DRM_DEBUG_DP("Host deinitialized successfully\n");
+}
+
+static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
+{
+	u8 *dpcd = ctrl->panel->dpcd;
+
+	/*
+	 * For better interop experience, used a fixed NVID=0x8000
+	 * whenever connected to a VGA dongle downstream.
+	 */
+	if (drm_dp_is_branch(dpcd))
+		return (drm_dp_has_quirk(&ctrl->panel->desc,
+				DP_DPCD_QUIRK_CONSTANT_N));
+
+	return false;
+}
+
+static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+		ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+	/*
+	 * Disable and re-enable the mainlink clock since the
+	 * link clock might have been adjusted as part of the
+	 * link maintenance.
+	 */
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+	/* hw recommended delay before re-enabling clocks */
+	msleep(20);
+
+	ret = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (ret) {
+		DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_ctrl_configure_source_params(ctrl);
+	dp_catalog_ctrl_config_msa(ctrl->catalog,
+		ctrl->link->link_params.rate,
+		ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
+	reinit_completion(&ctrl->idle_comp);
+
+	return ret;
+}
+
+static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+	int tries, max_tries = 10;
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+
+	for (tries = 0; tries < max_tries; tries++) {
+		ret = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (ret) {
+			DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
+			break;
+		}
+
+		ret = dp_ctrl_setup_main_link(ctrl, true);
+		if (ret == -EAGAIN) /* try with lower link rate */
+			dp_ctrl_link_rate_down_shift(ctrl);
+	}
+	return ret;
+}
+
+static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
+{
+	int ret = 0;
+
+	if (!ctrl->link->phy_params.phy_test_pattern_sel) {
+		DRM_DEBUG_DP("no test pattern selected by sink\n");
+		return ret;
+	}
+
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	/*
+	 * The global reset will need DP link related clocks to be
+	 * running. Add the global reset just before disabling the
+	 * link clocks and core clocks.
+	 */
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_ctrl_off(&ctrl->dp_ctrl);
+	if (ret) {
+		DRM_ERROR("failed to disable DP controller\n");
+		return ret;
+	}
+
+	ret = dp_ctrl_on(&ctrl->dp_ctrl);
+	if (ret)
+		DRM_ERROR("failed to enable DP controller\n");
+
+	return ret;
+}
+
+static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private *ctrl)
+{
+	bool success = false;
+	u32 pattern_sent = 0x0;
+	u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
+
+	DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
+
+	if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
+			ctrl->link->phy_params.v_level,
+			ctrl->link->phy_params.p_level)) {
+		DRM_ERROR("Failed to set v/p levels\n");
+		return false;
+	}
+	dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
+	dp_link_send_test_response(ctrl->link);
+
+	pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
+
+	switch (pattern_sent) {
+	case MR_LINK_TRAINING1:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_D10_2;
+		break;
+	case MR_LINK_SYMBOL_ERM:
+		success = (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_ERROR_RATE)
+			|| (pattern_requested ==
+				DP_LINK_QUAL_PATTERN_HBR2_EYE);
+		break;
+	case MR_LINK_PRBS7:
+		success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
+		break;
+	case MR_LINK_CUSTOM80:
+		success = pattern_requested ==
+				DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
+		break;
+	default:
+		success = false;
+	}
+
+	DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
+						pattern_requested);
+	return success;
+}
+
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 sink_request = 0x0;
+
+	if (!dp_ctrl) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	sink_request = ctrl->link->sink_request;
+
+	if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
+		if (dp_ctrl_process_phy_test_request(ctrl)) {
+			DRM_ERROR("process phy_test_req failed\n");
+			return;
+		}
+	}
+
+	if (sink_request & DP_LINK_STATUS_UPDATED)
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
+			return;
+		}
+
+
+	if (sink_request & DP_TEST_LINK_TRAINING) {
+		dp_link_send_test_response(ctrl->link);
+		if (dp_ctrl_link_maintenance(ctrl)) {
+			DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
+			return;
+		}
+	}
+}
+
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	u32 rate = 0;
+	u32 link_train_max_retries = 10;
+	u32 const phy_cts_pixel_clk_khz = 148500;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	rate = ctrl->panel->link_info.rate;
+
+	dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
+	dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
+		DRM_DEBUG_DP("using phy test link parameters\n");
+		if (!ctrl->panel->dp_mode.drm_mode.clock)
+			ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
+	} else {
+		ctrl->link->link_params.rate = rate;
+		ctrl->link->link_params.num_lanes =
+			ctrl->panel->link_info.num_lanes;
+		ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+	}
+
+	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
+		ctrl->link->link_params.rate,
+		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
+
+	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
+			ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
+
+	rc = dp_ctrl_enable_mainlink_clocks(ctrl);
+	if (rc)
+		return rc;
+
+	while (--link_train_max_retries && !atomic_read(&ctrl->dp_ctrl.aborted)) {
+		rc = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (rc) {
+			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
+			break;
+		}
+		rc = dp_ctrl_setup_main_link(ctrl, true);
+		if (!rc)
+			break;
+		/* try with lower link rate */
+		dp_ctrl_link_rate_down_shift(ctrl);
+	}
+
+	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
+		dp_ctrl_send_phy_test_pattern(ctrl);
+
+	return rc;
+}
+
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	int ret = 0;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	DRM_DEBUG_DP("DP off done\n");
+	return ret;
+}
+
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	u32 isr;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
+
+	if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
+		DRM_DEBUG_DP("dp_video_ready\n");
+		complete(&ctrl->video_comp);
+	}
+
+	if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
+		DRM_DEBUG_DP("idle_patterns_sent\n");
+		complete(&ctrl->idle_comp);
+	}
+}
+
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_ctrl_private *ctrl;
+	struct dp_ctrl *dp_ctrl;
+
+	if (!dev || !panel || !aux ||
+	    !link || !catalog) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	init_completion(&ctrl->idle_comp);
+	init_completion(&ctrl->video_comp);
+	mutex_init(&ctrl->push_idle_mutex);
+
+	/* in parameters */
+	ctrl->parser   = parser;
+	ctrl->panel    = panel;
+	ctrl->power    = power;
+	ctrl->aux      = aux;
+	ctrl->link     = link;
+	ctrl->catalog  = catalog;
+	ctrl->dev      = dev;
+
+	dp_ctrl = &ctrl->dp_ctrl;
+
+	return dp_ctrl;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	mutex_destroy(&ctrl->push_idle_mutex);
+
+	devm_kfree(ctrl->dev, ctrl);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
new file mode 100644
index 0000000..99ab4b2
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_CTRL_H_
+#define _DP_CTRL_H_
+
+#include "dp_aux.h"
+#include "dp_panel.h"
+#include "dp_link.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+
+struct dp_ctrl {
+	bool orientation;
+	atomic_t aborted;
+	u32 pixel_rate;
+};
+
+int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
+struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
+			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
+			struct dp_parser *parser);
+void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
+
+#endif /* _DP_CTRL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
new file mode 100644
index 0000000..a893542
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/component.h>
+#include <linux/of_irq.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_extcon.h"
+#include "dp_parser.h"
+#include "dp_power.h"
+#include "dp_catalog.h"
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_panel.h"
+#include "dp_ctrl.h"
+#include "dp_display.h"
+#include "dp_drm.h"
+
+static struct msm_dp *g_dp_display;
+#define HPD_STRING_SIZE 30
+
+struct dp_display_private {
+	char *name;
+	int irq;
+
+	/* state variables */
+	bool core_initialized;
+	bool power_on;
+	bool hpd_irq_on;
+	bool audio_supported;
+
+	struct platform_device *pdev;
+	struct dentry *root;
+	struct completion notification_comp;
+
+	struct dp_usbpd   *usbpd;
+	struct dp_parser  *parser;
+	struct dp_power   *power;
+	struct dp_catalog *catalog;
+	struct dp_aux     *aux;
+	struct dp_link    *link;
+	struct dp_panel   *panel;
+	struct dp_ctrl    *ctrl;
+
+	struct dp_usbpd_cb usbpd_cb;
+	struct dp_display_mode dp_mode;
+	struct msm_dp dp_display;
+};
+
+static const struct of_device_id dp_dt_match[] = {
+	{.compatible = "qcom,dp-display"},
+	{}
+};
+
+static irqreturn_t dp_display_irq(int irq, void *dev_id)
+{
+	struct dp_display_private *dp = dev_id;
+
+	if (!dp) {
+		DRM_ERROR("invalid data\n");
+		return IRQ_NONE;
+	}
+
+	/* DP controller isr */
+	dp_ctrl_isr(dp->ctrl);
+
+	/* DP aux isr */
+	dp_aux_isr(dp->aux);
+
+	return IRQ_HANDLED;
+}
+
+static int dp_display_bind(struct device *dev, struct device *master,
+			   void *data)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+	struct drm_device *drm;
+	struct msm_drm_private *priv;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (!dev || !pdev || !master) {
+		DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
+				dev, pdev, master);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	drm = dev_get_drvdata(master);
+	dp = platform_get_drvdata(pdev);
+	if (!drm || !dp) {
+		DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
+				drm, dp);
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp->dp_display.drm_dev = drm;
+	priv = drm->dev_private;
+	priv->dp = &(dp->dp_display);
+
+	rc = dp->parser->parse(dp->parser);
+	if (rc) {
+		DRM_ERROR("device tree parsing failed\n");
+		goto end;
+	}
+
+	rc = dp_aux_register(dp->aux);
+	if (rc) {
+		DRM_ERROR("DRM DP AUX register failed\n");
+		goto end;
+	}
+
+	rc = dp_power_client_init(dp->power);
+	if (rc) {
+		DRM_ERROR("Power client create failed\n");
+		goto end;
+	}
+
+end:
+	return rc;
+}
+
+static void dp_display_unbind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct dp_display_private *dp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct msm_drm_private *priv = drm->dev_private;
+
+	if (!dev || !pdev) {
+		DRM_ERROR("invalid param(s)\n");
+		return;
+	}
+
+	dp = platform_get_drvdata(pdev);
+	if (!dp) {
+		DRM_ERROR("Invalid params\n");
+		return;
+	}
+
+	(void)dp_power_client_deinit(dp->power);
+	(void)dp_aux_unregister(dp->aux);
+	priv->dp = NULL;
+}
+
+static const struct component_ops dp_display_comp_ops = {
+	.bind = dp_display_bind,
+	.unbind = dp_display_unbind,
+};
+
+static bool dp_display_is_ds_bridge(struct dp_panel *panel)
+{
+	return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
+		DP_DWN_STRM_PORT_PRESENT);
+}
+
+static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
+{
+	return dp_display_is_ds_bridge(dp->panel) &&
+		(dp->link->sink_count == 0);
+}
+
+static void dp_display_send_hpd_event(struct msm_dp *dp_display)
+{
+	struct dp_display_private *dp;
+	struct drm_connector *connector;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	connector = dp->dp_display.connector;
+	drm_helper_hpd_irq_event(connector->dev);
+}
+
+static int dp_display_send_hpd_notification(struct dp_display_private *dp,
+					    bool hpd)
+{
+	static bool encoder_mode_set = false;
+	struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
+	struct msm_kms *kms = priv->kms;
+
+	mutex_lock(&dp->dp_display.connect_mutex);
+	if ((hpd && dp->dp_display.is_connected) ||
+			(!hpd && !dp->dp_display.is_connected)) {
+		DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return 0;
+	}
+
+	/* reset video pattern flag on disconnect */
+	if (!hpd)
+		dp->panel->video_test = false;
+
+	dp->dp_display.is_connected = hpd;
+	reinit_completion(&dp->notification_comp);
+
+	if (dp->dp_display.is_connected && dp->dp_display.encoder
+				&& !encoder_mode_set
+				&& kms->funcs->set_encoder_mode) {
+		kms->funcs->set_encoder_mode(kms,
+				dp->dp_display.encoder, false);
+		DRM_DEBUG_DP("set_encoder_mode() Completed\n");
+		encoder_mode_set = true;
+	}
+
+	dp_display_send_hpd_event(&dp->dp_display);
+
+	if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
+		pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
+		mutex_unlock(&dp->dp_display.connect_mutex);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&dp->dp_display.connect_mutex);
+	return 0;
+}
+
+static int dp_display_process_hpd_high(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct edid *edid;
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	if (dp->link->psm_enabled)
+		goto notify;
+
+	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
+	if (rc)
+		goto notify;
+
+	dp_link_process_request(dp->link);
+
+	if (dp_display_is_sink_count_zero(dp)) {
+		DRM_DEBUG_DP("no downstream devices connected\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	edid = dp->panel->edid;
+
+	dp->audio_supported = drm_detect_monitor_audio(edid);
+
+	dp_panel_handle_sink_request(dp->panel);
+
+	dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
+notify:
+	dp_display_send_hpd_notification(dp, true);
+
+end:
+	return rc;
+}
+
+static void dp_display_host_init(struct dp_display_private *dp)
+{
+	bool flip = false;
+
+	if (dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already initialized\n");
+		return;
+	}
+
+	if (dp->usbpd->orientation == ORIENTATION_CC2)
+		flip = true;
+
+	dp_power_init(dp->power, flip);
+	dp_ctrl_host_init(dp->ctrl, flip);
+	enable_irq(dp->irq);
+	dp->core_initialized = true;
+}
+
+static void dp_display_host_deinit(struct dp_display_private *dp)
+{
+	if (!dp->core_initialized) {
+		DRM_DEBUG_DP("DP core already off\n");
+		return;
+	}
+
+	dp_ctrl_host_deinit(dp->ctrl);
+	dp_aux_deinit(dp->aux);
+	dp_power_deinit(dp->power);
+	disable_irq(dp->irq);
+	dp->core_initialized = false;
+}
+
+static void dp_display_process_hpd_low(struct dp_display_private *dp)
+{
+	dp_display_send_hpd_notification(dp, false);
+
+	dp_aux_deinit(dp->aux);
+}
+
+static int dp_display_usbpd_configure_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	dp_display_host_init(dp);
+
+	if (dp->usbpd->hpd_high)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_clean(struct dp_display_private *dp)
+{
+	dp_ctrl_push_idle(dp->ctrl);
+	dp_ctrl_off(dp->ctrl);
+}
+
+static int dp_display_usbpd_disconnect_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		rc = -EINVAL;
+		goto end;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		rc = -ENODEV;
+		goto end;
+	}
+
+	rc = dp_display_send_hpd_notification(dp, false);
+
+	/* if cable is disconnected, reset psm_enabled flag */
+	if (!dp->usbpd->alt_mode_cfg_done)
+		dp->link->psm_enabled = false;
+
+	if ((rc < 0) && dp->power_on)
+		dp_display_clean(dp);
+
+	dp_display_host_deinit(dp);
+end:
+	return rc;
+}
+
+static void dp_display_handle_video_request(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
+		/* force disconnect followed by connect */
+		dp->usbpd->connect(dp->usbpd, false);
+		dp->panel->video_test = true;
+		dp->usbpd->connect(dp->usbpd, true);
+		dp_link_send_test_response(dp->link);
+	}
+}
+
+static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
+{
+	if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
+		dp_display_send_hpd_notification(dp, false);
+
+		if (dp_display_is_sink_count_zero(dp)) {
+			DRM_DEBUG_DP("sink count is zero, nothing to do\n");
+			return 0;
+		}
+
+		return dp_display_process_hpd_high(dp);
+	}
+
+	dp_ctrl_handle_sink_request(dp->ctrl);
+
+	dp_display_handle_video_request(dp);
+
+	return 0;
+}
+
+static int dp_display_usbpd_attention_cb(struct device *dev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dev) {
+		DRM_ERROR("invalid dev\n");
+		return -EINVAL;
+	}
+
+	dp = dev_get_drvdata(dev);
+	if (!dp) {
+		DRM_ERROR("no driver data found\n");
+		return -ENODEV;
+	}
+
+	if (dp->usbpd->hpd_irq) {
+		dp->hpd_irq_on = true;
+
+		rc = dp_link_process_request(dp->link);
+		/* check for any test request issued by sink */
+		if (!rc)
+			dp_display_handle_hpd_irq(dp);
+
+		dp->hpd_irq_on = false;
+		goto end;
+	}
+
+	if (!dp->usbpd->hpd_high) {
+		dp_display_process_hpd_low(dp);
+		goto end;
+	}
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_display_process_hpd_high(dp);
+end:
+	return rc;
+}
+
+static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
+{
+	dp_ctrl_put(dp->ctrl);
+	dp_link_put(dp->link);
+	dp_panel_put(dp->panel);
+	dp_aux_put(dp->aux);
+	dp_power_put(dp->power);
+	dp_catalog_put(dp->catalog);
+	dp_parser_put(dp->parser);
+}
+
+static int dp_init_sub_modules(struct dp_display_private *dp)
+{
+	int rc = 0;
+	struct device *dev = &dp->pdev->dev;
+	struct dp_usbpd_cb *cb = &dp->usbpd_cb;
+	struct dp_panel_in panel_in = {
+		.dev = dev,
+	};
+
+	/* Callback APIs used for cable status change event */
+	cb->configure  = dp_display_usbpd_configure_cb;
+	cb->disconnect = dp_display_usbpd_disconnect_cb;
+	cb->attention  = dp_display_usbpd_attention_cb;
+
+	dp->parser = dp_parser_get(dp->pdev);
+	if (IS_ERR(dp->parser)) {
+		rc = PTR_ERR(dp->parser);
+		DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
+		dp->parser = NULL;
+		goto error_parser;
+	}
+
+	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
+	if (IS_ERR(dp->catalog)) {
+		rc = PTR_ERR(dp->catalog);
+		DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
+		dp->catalog = NULL;
+		goto error_catalog;
+	}
+
+	dp->power = dp_power_get(dp->parser);
+	if (IS_ERR(dp->power)) {
+		rc = PTR_ERR(dp->power);
+		DRM_ERROR("failed to initialize power, rc = %d\n", rc);
+		dp->power = NULL;
+		goto error_power;
+	}
+
+	dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
+	if (IS_ERR(dp->aux)) {
+		rc = PTR_ERR(dp->aux);
+		DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
+		dp->aux = NULL;
+		goto error_aux;
+	}
+
+	dp->link = dp_link_get(dev, dp->aux);
+	if (IS_ERR(dp->link)) {
+		rc = PTR_ERR(dp->link);
+		DRM_ERROR("failed to initialize link, rc = %d\n", rc);
+		dp->link = NULL;
+		goto error_link;
+	}
+
+	panel_in.aux = dp->aux;
+	panel_in.catalog = dp->catalog;
+	panel_in.link = dp->link;
+
+	dp->panel = dp_panel_get(&panel_in);
+	if (IS_ERR(dp->panel)) {
+		rc = PTR_ERR(dp->panel);
+		DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
+		dp->panel = NULL;
+		goto error_panel;
+	}
+
+	dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
+			       dp->power, dp->catalog, dp->parser);
+	if (IS_ERR(dp->ctrl)) {
+		rc = PTR_ERR(dp->ctrl);
+		DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
+		dp->ctrl = NULL;
+		goto error_ctrl;
+	}
+
+	return rc;
+error_ctrl:
+	dp_panel_put(dp->panel);
+error_panel:
+	dp_link_put(dp->link);
+error_link:
+	dp_aux_put(dp->aux);
+error_aux:
+	dp_power_put(dp->power);
+error_power:
+	dp_catalog_put(dp->catalog);
+error_catalog:
+	dp_parser_put(dp->parser);
+error_parser:
+	return rc;
+}
+
+static int dp_display_set_mode(struct msm_dp *dp_display,
+			       struct dp_display_mode *mode)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	dp->panel->dp_mode.bpp = mode->bpp;
+	dp->panel->dp_mode.capabilities = mode->capabilities;
+	dp_panel_init_panel_info(dp->panel);
+	return rc;
+}
+
+static int dp_display_prepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+static int dp_display_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->power_on) {
+		DRM_DEBUG_DP("Link already setup, return\n");
+		return 0;
+	}
+
+	dp_aux_init(dp->aux, dp->parser->aux_cfg);
+
+	rc = dp_ctrl_on(dp->ctrl);
+	if (!rc)
+		dp->power_on = true;
+
+	return rc;
+}
+
+static int dp_display_post_enable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	complete_all(&dp->notification_comp);
+	return rc;
+}
+
+static int dp_display_pre_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (dp->usbpd->alt_mode_cfg_done)
+		dp_link_psm_config(dp->link, &dp->panel->link_info, true);
+
+	dp_ctrl_push_idle(dp->ctrl);
+	return rc;
+}
+
+static int dp_display_disable(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	if (!dp->power_on || !dp->core_initialized)
+		goto error;
+
+	dp_ctrl_off(dp->ctrl);
+
+	dp->power_on = false;
+
+	complete_all(&dp->notification_comp);
+error:
+	return rc;
+}
+
+int dp_display_request_irq(struct msm_dp *dp_display)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!dp_display) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
+	if (dp->irq < 0) {
+		rc = dp->irq;
+		DRM_ERROR("failed to get irq: %d\n", rc);
+		return rc;
+	}
+
+	rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
+		IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
+	if (rc < 0) {
+		DRM_ERROR("failed to request IRQ%u: %d\n",
+				dp->irq, rc);
+		return rc;
+	}
+	disable_irq(dp->irq);
+
+	return 0;
+}
+
+static int dp_display_unprepare(struct msm_dp *dp)
+{
+	return 0;
+}
+
+int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
+{
+	const u32 num_components = 3, default_bpp = 24;
+	struct dp_display_private *dp_display;
+	struct drm_dp_link *link_info;
+	u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
+
+	if (!dp || !mode_pclk_khz || !dp->connector) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	link_info = &dp_display->panel->link_info;
+
+	mode_bpp = dp->connector->display_info.bpc * num_components;
+	if (!mode_bpp)
+		mode_bpp = default_bpp;
+
+	mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
+			mode_bpp, mode_pclk_khz);
+
+	mode_rate_khz = mode_pclk_khz * mode_bpp;
+	supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	if (mode_rate_khz > supported_rate_khz)
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+int dp_display_get_modes(struct msm_dp *dp,
+				struct dp_display_mode *dp_mode)
+{
+	struct dp_display_private *dp_display;
+	int ret = 0;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	ret = dp_panel_get_modes(dp_display->panel,
+		dp->connector, dp_mode);
+	if (dp_mode->drm_mode.clock)
+		dp->max_pclk_khz = dp_mode->drm_mode.clock;
+	return ret;
+}
+
+bool dp_display_check_video_test(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return false;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	if (dp_display->panel->video_test)
+		return true;
+
+	return false;
+}
+
+int dp_display_get_test_bpp(struct msm_dp *dp)
+{
+	struct dp_display_private *dp_display;
+
+	if (!dp) {
+		DRM_ERROR("invalid params\n");
+		return 0;
+	}
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	return dp_link_bit_depth_to_bpp(
+		dp_display->link->test_video.test_bit_depth);
+}
+
+static int dp_display_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct dp_display_private *dp;
+
+	if (!pdev || !pdev->dev.of_node) {
+		DRM_ERROR("pdev not found\n");
+		return -ENODEV;
+	}
+
+	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	init_completion(&dp->notification_comp);
+
+	dp->pdev = pdev;
+	dp->name = "drm_dp";
+
+	rc = dp_init_sub_modules(dp);
+	if (rc) {
+		DRM_ERROR("init sub module failed\n");
+		devm_kfree(&pdev->dev, dp);
+		return -EPROBE_DEFER;
+	}
+
+	platform_set_drvdata(pdev, dp);
+
+	mutex_init(&dp->dp_display.connect_mutex);
+	g_dp_display = &dp->dp_display;
+
+	rc = component_add(&pdev->dev, &dp_display_comp_ops);
+	if (rc) {
+		DRM_ERROR("component add failed, rc=%d\n", rc);
+		dp_display_deinit_sub_modules(dp);
+		devm_kfree(&pdev->dev, dp);
+	}
+
+	return rc;
+}
+
+static int dp_display_remove(struct platform_device *pdev)
+{
+	struct dp_display_private *dp;
+
+	if (!pdev)
+		return -EINVAL;
+
+	dp = platform_get_drvdata(pdev);
+
+	dp_display_deinit_sub_modules(dp);
+
+	platform_set_drvdata(pdev, NULL);
+	devm_kfree(&pdev->dev, dp);
+
+	return 0;
+}
+
+static struct platform_driver dp_display_driver = {
+	.probe  = dp_display_probe,
+	.remove = dp_display_remove,
+	.driver = {
+		.name = "msm-dp-display",
+		.of_match_table = dp_dt_match,
+	},
+};
+
+int __init msm_dp_register(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&dp_display_driver);
+	if (ret) {
+		DRM_ERROR("driver register failed");
+		return ret;
+	}
+
+	return ret;
+}
+
+void __exit msm_dp_unregister(void)
+{
+	platform_driver_unregister(&dp_display_driver);
+}
+
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			struct drm_encoder *encoder)
+{
+	struct msm_drm_private *priv;
+	int ret;
+
+	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
+		return -EINVAL;
+
+	priv = dev->dev_private;
+	dp_display->drm_dev = dev;
+
+	ret = dp_display_request_irq(dp_display);
+	if (ret) {
+		DRM_ERROR("request_irq failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_display->encoder = encoder;
+
+	dp_display->connector = dp_drm_connector_init(dp_display);
+	if (IS_ERR(dp_display->connector)) {
+		ret = PTR_ERR(dp_display->connector);
+		DRM_DEV_ERROR(dev->dev,
+			"failed to create dp connector: %d\n", ret);
+		dp_display->connector = NULL;
+		return ret;
+	}
+
+	priv->connectors[priv->num_connectors++] = dp_display->connector;
+	return 0;
+}
+
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+	if (!dp_display->dp_mode.drm_mode.clock) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
+	if (rc) {
+		DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_prepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display enable failed, rc=%d\n", rc);
+		dp_display_unprepare(dp);
+		return rc;
+	}
+
+	rc = dp_display_post_enable(dp);
+	if (rc) {
+		DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
+		dp_display_disable(dp);
+		dp_display_unprepare(dp);
+	}
+	return rc;
+}
+
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	int rc = 0;
+
+	rc = dp_display_pre_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_disable(dp);
+	if (rc) {
+		DRM_ERROR("DP display disable failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = dp_display_unprepare(dp);
+	if (rc) {
+		DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
+	}
+	return rc;
+}
+
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct dp_display_private *dp_display;
+
+	dp_display = container_of(dp, struct dp_display_private, dp_display);
+
+	memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
+
+	if (dp_display_check_video_test(dp))
+		dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
+	else /* Default num_components per pixel = 3 */
+		dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
+
+	if (!dp_display->dp_mode.bpp)
+		dp_display->dp_mode.bpp = 24; /* Default bpp */
+
+	drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
+
+	dp_display->dp_mode.v_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
+
+	dp_display->dp_mode.h_active_low =
+		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
new file mode 100644
index 0000000..c916408
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DISPLAY_H_
+#define _DP_DISPLAY_H_
+
+#include <drm/drmP.h>
+
+#include "dp_panel.h"
+
+struct msm_dp {
+	struct drm_device *drm_dev;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	bool is_connected;
+	struct mutex connect_mutex;
+	u32 max_pclk_khz;
+};
+
+int dp_display_validate_mode(struct msm_dp *dp_display, u32 mode_pclk_khz);
+int dp_display_get_modes(struct msm_dp *dp_display,
+		struct dp_display_mode *dp_mode);
+int dp_display_request_irq(struct msm_dp *dp_display);
+bool dp_display_check_video_test(struct msm_dp *dp_display);
+int dp_display_get_test_bpp(struct msm_dp *dp_display);
+
+#endif /* _DP_DISPLAY_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
new file mode 100644
index 0000000..a72b0bb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp]: %s: " fmt, __func__
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_crtc.h>
+
+#include "msm_drv.h"
+#include "msm_kms.h"
+#include "dp_drm.h"
+
+struct dp_connector {
+	struct drm_connector base;
+	struct msm_dp *dp_display;
+};
+#define to_dp_connector(x) container_of(x, struct dp_connector, base)
+
+/**
+ * dp_connector_detect - callback to determine if connector is connected
+ * @connector: Pointer to drm connector structure
+ * @force: Force detect setting from drm framework
+ * Returns: Connector 'is connected' status
+ */
+static enum drm_connector_status dp_connector_detect(struct drm_connector *conn,
+		bool force)
+{
+	struct msm_dp *dp;
+
+	dp = to_dp_connector(conn)->dp_display;
+
+	DRM_DEBUG_DP("is_connected = %s\n",
+		(dp->is_connected) ? "true" : "false");
+
+	return (dp->is_connected) ? connector_status_connected :
+					connector_status_disconnected;
+}
+
+/**
+ * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add()
+ * @connector: Pointer to drm connector structure
+ * Returns: Number of modes added
+ */
+static int dp_connector_get_modes(struct drm_connector *connector)
+{
+	int rc = 0;
+	struct msm_dp *dp;
+	struct dp_display_mode *dp_mode = NULL;
+	struct drm_display_mode *m, drm_mode;
+
+	if (!connector)
+		return 0;
+
+	dp = to_dp_connector(connector)->dp_display;
+
+	dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
+	if (!dp_mode)
+		return 0;
+
+	mutex_lock(&dp->connect_mutex);
+	/* pluggable case assumes EDID is read when HPD */
+	if (dp->is_connected) {
+		/*
+		 *The get_modes() function might return one mode that is stored
+		 * in dp_mode when compliance test is in progress. If not, the
+		 * return value is equal to the total number of modes supported
+		 * by the sink
+		 */
+		rc = dp_display_get_modes(dp, dp_mode);
+		if (rc <= 0) {
+			DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
+			mutex_unlock(&dp->connect_mutex);
+			return rc;
+		}
+		if (dp_mode->drm_mode.clock) { /* valid DP mode */
+			memset(&drm_mode, 0x0, sizeof(drm_mode));
+			drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
+			m = drm_mode_duplicate(connector->dev, &drm_mode);
+			if (!m) {
+				DRM_ERROR("failed to add mode %ux%u\n",
+				       drm_mode.hdisplay,
+				       drm_mode.vdisplay);
+				kfree(dp_mode);
+				mutex_unlock(&dp->connect_mutex);
+				return 0;
+			}
+			drm_mode_probed_add(connector, m);
+		}
+	} else {
+		DRM_DEBUG_DP("No sink connected\n");
+	}
+	mutex_unlock(&dp->connect_mutex);
+	kfree(dp_mode);
+	return rc;
+}
+
+/**
+ * dp_connector_mode_valid - callback to determine if specified mode is valid
+ * @connector: Pointer to drm connector structure
+ * @mode: Pointer to drm mode structure
+ * Returns: Validity status for specified mode
+ */
+static enum drm_mode_status dp_connector_mode_valid(struct drm_connector *connector,
+		struct drm_display_mode *mode)
+{
+	struct msm_dp *dp_disp;
+
+	if (!mode || !connector) {
+		DRM_ERROR("invalid params\n");
+		return MODE_ERROR;
+	}
+
+	dp_disp = to_dp_connector(connector)->dp_display;
+
+	mode->vrefresh = drm_mode_vrefresh(mode);
+
+	if ((dp_disp->max_pclk_khz <= 0) ||
+			(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
+			(mode->clock > dp_disp->max_pclk_khz))
+		return MODE_BAD;
+
+	return dp_display_validate_mode(dp_disp, mode->clock);
+}
+
+static const struct drm_connector_funcs dp_connector_funcs = {
+	.detect = dp_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs dp_connector_helper_funcs = {
+	.get_modes = dp_connector_get_modes,
+	.mode_valid = dp_connector_mode_valid,
+};
+
+/* connector initialization */
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
+{
+	struct drm_connector *connector = NULL;
+	struct dp_connector *dp_connector;
+	int ret;
+
+	dp_connector = devm_kzalloc(dp_display->drm_dev->dev, sizeof(*dp_connector),
+				    GFP_KERNEL);
+	if (!dp_connector)
+		return ERR_PTR(-ENOMEM);
+
+	dp_connector->dp_display = dp_display;
+
+	connector = &dp_connector->base;
+
+	ret = drm_connector_init(dp_display->drm_dev, connector, &dp_connector_funcs,
+			DRM_MODE_CONNECTOR_DisplayPort);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_connector_helper_add(connector, &dp_connector_helper_funcs);
+
+	/*
+	 * Enable HPD to let hpd event is handled when cable is attached to the host.
+	 */
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_attach_encoder(connector, dp_display->encoder);
+
+	return connector;
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
new file mode 100644
index 0000000..cf472c5
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_DRM_H_
+#define _DP_DRM_H_
+
+#include <linux/types.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "msm_drv.h"
+#include "dp_display.h"
+
+struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display);
+
+#endif /* _DP_DRM_H_ */
+
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c b/drivers/gpu/drm/msm/dp/dp_extcon.c
new file mode 100644
index 0000000..0fb34ef
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/extcon.h>
+#include <drm/drmP.h>
+
+#include "dp_extcon.h"
+
+/* DP specific VDM commands */
+#define DP_USBPD_VDM_STATUS	0x10
+#define DP_USBPD_VDM_CONFIGURE	0x11
+
+/* USBPD-TypeC specific Macros */
+#define VDM_VERSION		0x0
+#define USB_C_DP_SID		0xFF01
+
+struct dp_extcon_private {
+	u32 vdo;
+	struct device *dev;
+	struct notifier_block extcon_nb;
+	struct extcon_dev *extcon;
+	struct workqueue_struct *extcon_wq;
+	struct work_struct event_work;
+	struct usbpd *pd;
+	struct dp_usbpd_cb *dp_cb;
+	struct dp_usbpd dp_usbpd;
+};
+
+static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
+{
+	int rc = 0;
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	dp_usbpd->hpd_high = hpd;
+
+	if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
+				&& !extcon_priv->dp_cb->disconnect) {
+		DRM_ERROR("extcon dp_cb not initialized\n");
+		return -EINVAL;
+	}
+	if (hpd)
+		extcon_priv->dp_cb->configure(extcon_priv->dev);
+	else
+		extcon_priv->dp_cb->disconnect(extcon_priv->dev);
+
+	return rc;
+}
+
+static void dp_extcon_event_work(struct work_struct *work)
+{
+	struct dp_extcon_private *extcon_priv;
+	int dp_state, ret;
+	union extcon_property_value property;
+
+	extcon_priv = container_of(work,
+			struct dp_extcon_private, event_work);
+
+	if (!extcon_priv || !extcon_priv->extcon) {
+		DRM_ERROR("Invalid extcon device handler\n");
+		return;
+	}
+
+	dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
+
+	if (dp_state > 0) {
+		ret = extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_TYPEC_POLARITY,
+					&property);
+		if (ret) {
+			DRM_ERROR("Get Polarity property failed\n");
+			return;
+		}
+		extcon_priv->dp_usbpd.orientation =
+			(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
+
+		extcon_get_property(extcon_priv->extcon,
+					EXTCON_DISP_DP,
+					EXTCON_PROP_USB_SS,
+					&property);
+		extcon_priv->dp_usbpd.multi_func =
+				((property.intval) ? true : false);
+
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
+		if (ret) {
+			DRM_ERROR("extcon_connect->true failed\n");
+			return;
+		}
+	} else {
+		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
+		if (ret) {
+			DRM_ERROR("extcon_connect->false failed\n");
+			return;
+		}
+	}
+}
+
+static int dp_extcon_event_notify(struct notifier_block *nb,
+				  unsigned long event, void *priv)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	extcon_priv = container_of(nb, struct dp_extcon_private,
+						extcon_nb);
+
+	queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
+	return NOTIFY_DONE;
+}
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+	int ret = 0;
+
+	if (!dp_usbpd)
+		return -EINVAL;
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
+	ret = devm_extcon_register_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+	if (ret) {
+		DRM_DEV_ERROR(extcon_priv->dev,
+			"register EXTCON_DISP_DP notifier err\n");
+		ret = -EINVAL;
+		return ret;
+	}
+
+	extcon_priv->extcon_wq = create_singlethread_workqueue("drm_dp_extcon");
+	if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
+		DRM_ERROR("Failed to create workqueue\n");
+		dp_extcon_unregister(dp_usbpd);
+		return -EPERM;
+	}
+
+	INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
+	return ret;
+}
+
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon_priv;
+
+	if (!dp_usbpd) {
+		DRM_ERROR("Invalid input\n");
+		return;
+	}
+
+	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_extcon_unregister_notifier(extcon_priv->dev, extcon_priv->extcon,
+					    EXTCON_DISP_DP,
+					    &extcon_priv->extcon_nb);
+
+	if (extcon_priv->extcon_wq)
+		destroy_workqueue(extcon_priv->extcon_wq);
+
+	return;
+}
+
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb)
+{
+	int rc = 0;
+	struct dp_extcon_private *dp_extcon;
+	struct dp_usbpd *dp_usbpd;
+
+	if (!cb) {
+		DRM_ERROR("invalid cb data\n");
+		rc = -EINVAL;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
+	if (!dp_extcon) {
+		rc = -ENOMEM;
+		return ERR_PTR(rc);
+	}
+
+	dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (!dp_extcon->extcon) {
+		DRM_ERROR("invalid extcon data\n");
+		rc = -EINVAL;
+		devm_kfree(dev, dp_extcon);
+		return ERR_PTR(rc);
+        }
+
+	dp_extcon->dev = dev;
+	dp_extcon->dp_cb = cb;
+
+	dp_extcon->dp_usbpd.connect = dp_extcon_connect;
+	dp_usbpd = &dp_extcon->dp_usbpd;
+
+	return dp_usbpd;
+}
+
+void dp_extcon_put(struct dp_usbpd *dp_usbpd)
+{
+	struct dp_extcon_private *extcon;
+
+	if (!dp_usbpd)
+		return;
+
+	extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
+
+	devm_kfree(extcon->dev, extcon);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h b/drivers/gpu/drm/msm/dp/dp_extcon.h
new file mode 100644
index 0000000..c6c3051
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_EXTCON_H_
+#define _DP_EXTCON_H_
+
+//#include <linux/usb/usbpd.h>
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+enum plug_orientation {
+	ORIENTATION_NONE,
+	ORIENTATION_CC1,
+	ORIENTATION_CC2,
+};
+
+/**
+ * struct dp_usbpd - DisplayPort status
+ *
+ * @orientation: plug orientation configuration
+ * @low_pow_st: low power state
+ * @adaptor_dp_en: adaptor functionality enabled
+ * @multi_func: multi-function preferred
+ * @usb_config_req: request to switch to usb
+ * @exit_dp_mode: request exit from displayport mode
+ * @hpd_high: Hot Plug Detect signal is high.
+ * @hpd_irq: Change in the status since last message
+ * @alt_mode_cfg_done: bool to specify alt mode status
+ * @debug_en: bool to specify debug mode
+ * @connect: simulate disconnect or connect for debug mode
+ */
+struct dp_usbpd {
+	enum plug_orientation orientation;
+	bool low_pow_st;
+	bool adaptor_dp_en;
+	bool multi_func;
+	bool usb_config_req;
+	bool exit_dp_mode;
+	bool hpd_high;
+	bool hpd_irq;
+	bool alt_mode_cfg_done;
+	bool debug_en;
+
+	int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
+};
+
+/**
+ * struct dp_usbpd_cb - callback functions provided by the client
+ *
+ * @configure: called by usbpd module when PD communication has
+ * been completed and the usb peripheral has been configured on
+ * dp mode.
+ * @disconnect: notify the cable disconnect issued by usb.
+ * @attention: notify any attention message issued by usb.
+ */
+struct dp_usbpd_cb {
+	int (*configure)(struct device *dev);
+	int (*disconnect)(struct device *dev);
+	int (*attention)(struct device *dev);
+};
+
+/**
+ * dp_extcon_get() - setup usbpd module
+ *
+ * @dev: device instance of the caller
+ * @cb: struct containing callback function pointers.
+ *
+ * This function allows the client to initialize the usbpd
+ * module. The module will communicate with usb driver and
+ * handles the power delivery (PD) communication with the
+ * sink/usb device. This module will notify the client using
+ * the callback functions about the connection and status.
+ */
+struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb);
+
+void dp_extcon_put(struct dp_usbpd *pd);
+
+int dp_extcon_register(struct dp_usbpd *dp_usbpd);
+void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
+
+#endif /* _DP_EXTCON_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
new file mode 100644
index 0000000..9f5b7bc8
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_link.h"
+#include "dp_panel.h"
+
+#define DP_TEST_REQUEST_MASK		0x7F
+
+enum audio_sample_rate {
+	AUDIO_SAMPLE_RATE_32_KHZ	= 0x00,
+	AUDIO_SAMPLE_RATE_44_1_KHZ	= 0x01,
+	AUDIO_SAMPLE_RATE_48_KHZ	= 0x02,
+	AUDIO_SAMPLE_RATE_88_2_KHZ	= 0x03,
+	AUDIO_SAMPLE_RATE_96_KHZ	= 0x04,
+	AUDIO_SAMPLE_RATE_176_4_KHZ	= 0x05,
+	AUDIO_SAMPLE_RATE_192_KHZ	= 0x06,
+};
+
+enum audio_pattern_type {
+	AUDIO_TEST_PATTERN_OPERATOR_DEFINED	= 0x00,
+	AUDIO_TEST_PATTERN_SAWTOOTH		= 0x01,
+};
+
+struct dp_link_request {
+	u32 test_requested;
+	u32 test_link_rate;
+	u32 test_lane_count;
+};
+
+struct dp_link_private {
+	u32 prev_sink_count;
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link dp_link;
+
+	struct dp_link_request request;
+	struct mutex test_response_mutex;
+	struct mutex psm_mutex;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+};
+
+static int dp_link_get_period(struct dp_link_private *link, int const addr)
+{
+	int ret = 0;
+	u8 data;
+	u32 const max_audio_period = 0xA;
+
+	/* TEST_AUDIO_PERIOD_CH_XX */
+	if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
+		DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Period - Bits 3:0 */
+	data = data & 0xF;
+	if ((int)data > max_audio_period) {
+		DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = data;
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_channel_period(struct dp_link_private *link)
+{
+	int ret = 0;
+	struct dp_link_test_audio *req = &link->dp_link.test_audio;
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_1 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_2 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
+
+	/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_3 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_4 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_5 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_6 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_7 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
+
+	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
+	if (ret == -EINVAL)
+		goto exit;
+
+	req->test_audio_period_ch_8 = ret;
+	DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_pattern_type(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_pattern_type = 0x1;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_TEST_AUDIO_PATTERN_TYPE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Audio Pattern Type - Bits 7:0 */
+	if ((int)data > max_audio_pattern_type) {
+		DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_pattern_type = data;
+	DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
+exit:
+	return ret;
+}
+
+static int dp_link_parse_audio_mode(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+	int const max_audio_sampling_rate = 0x6;
+	int const max_audio_channel_count = 0x8;
+	int sampling_rate = 0x0;
+	int channel_count = 0x0;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Sampling Rate - Bits 3:0 */
+	sampling_rate = data & 0xF;
+	if (sampling_rate > max_audio_sampling_rate) {
+		DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
+				sampling_rate, max_audio_sampling_rate);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Channel Count - Bits 7:4 */
+	channel_count = ((data & 0xF0) >> 4) + 1;
+	if (channel_count > max_audio_channel_count) {
+		DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
+				channel_count, max_audio_channel_count);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
+	link->dp_link.test_audio.test_audio_channel_count = channel_count;
+	DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
+					sampling_rate, channel_count);
+exit:
+	return ret;
+}
+
+/**
+ * dp_parse_audio_pattern_params() - parses audio pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the audio link pattern parameters.
+ */
+static int dp_link_parse_audio_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	ret = dp_link_parse_audio_mode(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_pattern_type(link);
+	if (ret)
+		goto exit;
+
+	ret = dp_link_parse_audio_channel_period(link);
+
+exit:
+	return ret;
+}
+
+/**
+ * dp_link_is_video_pattern_valid() - validates the video pattern
+ * @pattern: video pattern requested by the sink
+ *
+ * Returns true if the requested video pattern is supported.
+ */
+static bool dp_link_is_video_pattern_valid(u32 pattern)
+{
+	switch (pattern) {
+	case DP_NO_TEST_PATTERN:
+	case DP_COLOR_RAMP:
+	case DP_BLACK_AND_WHITE_VERTICAL_LINES:
+	case DP_COLOR_SQUARE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * dp_link_is_bit_depth_valid() - validates the bit depth requested
+ * @bit_depth: bit depth requested by the sink
+ *
+ * Returns true if the requested bit depth is supported.
+ */
+static bool dp_link_is_bit_depth_valid(u32 tbd)
+{
+	/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+	case DP_TEST_BIT_DEPTH_8:
+	case DP_TEST_BIT_DEPTH_10:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int dp_link_parse_timing_params1(struct dp_link_private *link,
+					int addr, int len, u32 *val)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val = bp[1] | (bp[0] << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params2(struct dp_link_private *link,
+					int addr, int len,
+					u32 *val1, u32 *val2)
+{
+	u8 bp[2];
+	int rlen;
+
+	if (len != 2)
+		return -EINVAL;
+
+	/* Read the requested video link pattern (Byte 0x221). */
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
+	if (rlen < len) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+
+	*val1 = (bp[0] & BIT(7)) >> 7;
+	*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
+
+	return 0;
+}
+
+static int dp_link_parse_timing_params3(struct dp_link_private *link,
+					int addr, u32 *val)
+{
+	u8 bp;
+	u32 len = 1;
+	int rlen;
+
+	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
+	if (rlen < 1) {
+		DRM_ERROR("failed to read 0x%x\n", addr);
+		return -EINVAL;
+	}
+	*val = bp;
+
+	return 0;
+}
+
+/**
+ * dp_parse_video_pattern_params() - parses video pattern parameters from DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the video link pattern and the link
+ * bit depth requested by the sink and, and if the values parsed are valid.
+ */
+static int dp_link_parse_video_pattern_params(struct dp_link_private *link)
+{
+	int ret = 0;
+	ssize_t rlen;
+	u8 bp;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!dp_link_is_video_pattern_valid(bp)) {
+		DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_video_pattern = bp;
+
+	/* Read the requested color bit depth and dynamic range (Byte 0x232) */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	/* Dynamic Range */
+	link->dp_link.test_video.test_dyn_range = (bp & DP_TEST_DYNAMIC_RANGE_CEA);
+
+	/* Color bit depth */
+	bp &= DP_TEST_BIT_DEPTH_MASK;
+	if (!dp_link_is_bit_depth_valid(bp)) {
+		DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
+		ret = -EINVAL;
+		return ret;
+	}
+
+	link->dp_link.test_video.test_bit_depth = bp;
+
+	/* resolution timing params */
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_h_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
+			&link->dp_link.test_video.test_v_total);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
+			&link->dp_link.test_video.test_h_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
+			&link->dp_link.test_video.test_v_start);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
+			&link->dp_link.test_video.test_hsync_pol,
+			&link->dp_link.test_video.test_hsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
+			&link->dp_link.test_video.test_vsync_pol,
+			&link->dp_link.test_video.test_vsync_width);
+	if (ret) {
+		DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
+			&link->dp_link.test_video.test_h_width);
+	if (ret) {
+		DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
+			&link->dp_link.test_video.test_v_height);
+	if (ret) {
+		DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
+		&link->dp_link.test_video.test_rr_d);
+	link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
+		return ret;
+	}
+
+	ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR,
+		&link->dp_link.test_video.test_rr_n);
+	if (ret) {
+		DRM_ERROR("failed to parse test_rr_n (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
+		return ret;
+	}
+
+	DRM_DEBUG_DP("link video pattern = 0x%x\n" \
+		"link dynamic range = 0x%x\n" \
+		"link bit depth = 0x%x\n" \
+		"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
+		"TEST_H_START = %d, TEST_V_START = %d\n" \
+		"TEST_HSYNC_POL = %d\n" \
+		"TEST_HSYNC_WIDTH = %d\n" \
+		"TEST_VSYNC_POL = %d\n" \
+		"TEST_VSYNC_WIDTH = %d\n" \
+		"TEST_H_WIDTH = %d\n" \
+		"TEST_V_HEIGHT = %d\n" \
+		"TEST_REFRESH_DENOMINATOR = %d\n" \
+		 "TEST_REFRESH_NUMERATOR = %d\n",
+		link->dp_link.test_video.test_video_pattern,
+		link->dp_link.test_video.test_dyn_range,
+		link->dp_link.test_video.test_bit_depth,
+		link->dp_link.test_video.test_h_total,
+		link->dp_link.test_video.test_v_total,
+		link->dp_link.test_video.test_h_start,
+		link->dp_link.test_video.test_v_start,
+		link->dp_link.test_video.test_hsync_pol,
+		link->dp_link.test_video.test_hsync_width,
+		link->dp_link.test_video.test_vsync_pol,
+		link->dp_link.test_video.test_vsync_width,
+		link->dp_link.test_video.test_h_width,
+		link->dp_link.test_video.test_v_height,
+		link->dp_link.test_video.test_rr_d,
+		link->dp_link.test_video.test_rr_n);
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_link_training_params() - parses link training parameters from
+ * DPCD
+ * @link: Display Port Driver data
+ *
+ * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane
+ * count (Byte 0x220), and if these values parse are valid.
+ */
+static int dp_link_parse_link_training_params(struct dp_link_private *link)
+{
+	u8 bp;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,	&bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!is_link_rate_valid(bp)) {
+		DRM_ERROR("invalid link rate = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_link_rate = bp;
+	DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT, &bp);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
+		return rlen;
+	}
+	bp &= DP_MAX_LANE_COUNT_MASK;
+
+	if (!is_lane_count_valid(bp)) {
+		DRM_ERROR("invalid lane count = 0x%x\n", bp);
+		return -EINVAL;
+	}
+
+	link->request.test_lane_count = bp;
+	DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
+	return 0;
+}
+
+/**
+ * dp_parse_phy_test_params() - parses the phy link parameters
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being
+ * requested.
+ */
+static int dp_link_parse_phy_test_params(struct dp_link_private *link)
+{
+	u8 data;
+	ssize_t rlen;
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN, &data);
+	if (rlen < 0) {
+		DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	link->dp_link.phy_params.phy_test_pattern_sel = data;
+
+	DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
+
+	switch (data) {
+	case DP_LINK_QUAL_PATTERN_DISABLE:
+	case DP_LINK_QUAL_PATTERN_D10_2:
+	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
+	case DP_LINK_QUAL_PATTERN_PRBS7:
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
+	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * dp_link_is_video_audio_test_requested() - checks for audio/video link request
+ * @link: link requested by the sink
+ *
+ * Returns true if the requested link is a permitted audio/video link.
+ */
+static bool dp_link_is_video_audio_test_requested(u32 link)
+{
+	u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
+				DP_TEST_LINK_AUDIO_PATTERN |
+				DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+
+	return ((link & video_audio_test) &&
+		!(link & ~video_audio_test));
+}
+
+/**
+ * dp_link_parse_request() - parses link request parameters from sink
+ * @link: Display Port Driver data
+ *
+ * Parses the DPCD to check if an automated link is requested (Byte 0x201),
+ * and what type of link automation is being requested (Byte 0x218).
+ */
+static int dp_link_parse_request(struct dp_link_private *link)
+{
+	int ret = 0;
+	u8 data;
+	ssize_t rlen;
+
+	/**
+	 * Read the device service IRQ vector (Byte 0x201) to determine
+	 * whether an automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
+				DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
+
+	if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
+		DRM_DEBUG_DP("no test requested\n");
+		return 0;
+	}
+
+	/**
+	 * Read the link request byte (Byte 0x218) to determine what type
+	 * of automated link has been requested by the sink.
+	 */
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
+	if (rlen < 0) {
+		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
+		DRM_DEBUG_DP("link 0x%x not supported\n", data);
+		goto end;
+	}
+
+	DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
+	link->request.test_requested = data;
+
+	if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
+		ret = dp_link_parse_phy_test_params(link);
+		if (ret)
+			goto end;
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
+		ret = dp_link_parse_link_training_params(link);
+		if (ret)
+			goto end;
+	}
+
+	if (dp_link_is_video_audio_test_requested(
+			link->request.test_requested)) {
+		ret = dp_link_parse_video_pattern_params(link);
+		if (ret)
+			goto end;
+
+		ret = dp_link_parse_audio_pattern_params(link);
+	}
+end:
+	/*
+	 * Send a DP_TEST_ACK if all link parameters are valid, otherwise send
+	 * a DP_TEST_NAK.
+	 */
+	if (ret) {
+		link->dp_link.test_response = DP_TEST_NAK;
+	} else {
+		if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
+			link->dp_link.test_response = DP_TEST_ACK;
+		else
+			link->dp_link.test_response =
+				DP_TEST_EDID_CHECKSUM_WRITE;
+	}
+
+	return ret;
+}
+
+/**
+ * dp_link_parse_sink_count() - parses the sink count
+ *
+ * Parses the DPCD to check if there is an update to the sink count
+ * (Byte 0x200), and whether all the sink devices connected have Content
+ * Protection enabled.
+ */
+static int dp_link_parse_sink_count(struct dp_link *dp_link)
+{
+	ssize_t rlen;
+	bool cp_ready;
+
+	struct dp_link_private *link = container_of(dp_link,
+			struct dp_link_private, dp_link);
+
+	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
+				 &link->dp_link.sink_count);
+	if (rlen < 0) {
+		DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
+		return rlen;
+	}
+
+	cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
+
+	link->dp_link.sink_count =
+		DP_GET_SINK_COUNT(link->dp_link.sink_count);
+
+	DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
+		link->dp_link.sink_count, cp_ready);
+	return 0;
+}
+
+static void dp_link_parse_sink_status_field(struct dp_link_private *link)
+{
+	int len = 0;
+
+	link->prev_sink_count = link->dp_link.sink_count;
+	dp_link_parse_sink_count(&link->dp_link);
+
+	len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
+		link->link_status);
+	if (len < DP_LINK_STATUS_SIZE)
+		DRM_ERROR("DP link status read failed\n");
+	dp_link_parse_request(link);
+}
+
+/**
+ * dp_link_process_link_training_request() - processes new training requests
+ * @link: Display Port link data
+ *
+ * This function will handle new link training requests that are initiated by
+ * the sink. In particular, it will update the requested lane count and link
+ * link rate, and then trigger the link retraining procedure.
+ *
+ * The function will return 0 if a link training request has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_training_request(struct dp_link_private *link)
+{
+	if (link->request.test_requested != DP_TEST_LINK_TRAINING)
+		return -EINVAL;
+
+	DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
+			DP_TEST_LINK_TRAINING,
+			link->request.test_link_rate,
+			link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	return 0;
+}
+
+bool dp_link_send_test_response(struct dp_link *dp_link)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
+			dp_link->test_response);
+	mutex_unlock(&link->test_response_mutex);
+
+	return ret == 1;
+}
+
+int dp_link_psm_config(struct dp_link *dp_link,
+			      struct drm_dp_link *link_info, bool enable)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid params\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->psm_mutex);
+	if (enable)
+		ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
+	else
+		ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
+
+	if (ret)
+		DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" : "exit");
+	else
+		dp_link->psm_enabled = enable;
+
+	mutex_unlock(&link->psm_mutex);
+	return ret;
+}
+
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
+{
+	struct dp_link_private *link = NULL;
+	int ret = 0;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return false;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM, checksum);
+	return ret == 1;
+}
+
+static int dp_link_parse_vx_px(struct dp_link_private *link)
+{
+	int ret = 0;
+
+	DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_voltage(link->link_status, 0),
+		drm_dp_get_adjust_request_voltage(link->link_status, 1),
+		drm_dp_get_adjust_request_voltage(link->link_status, 2),
+		drm_dp_get_adjust_request_voltage(link->link_status, 3));
+
+	DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
+
+	/**
+	 * Update the voltage and pre-emphasis levels as per DPCD request
+	 * vector.
+	 */
+	DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+	link->dp_link.phy_params.v_level =
+		drm_dp_get_adjust_request_voltage(link->link_status, 0);
+	link->dp_link.phy_params.p_level =
+		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
+	DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
+			link->dp_link.phy_params.v_level,
+			link->dp_link.phy_params.p_level);
+
+	return ret;
+}
+
+/**
+ * dp_link_process_phy_test_pattern_request() - process new phy link requests
+ * @link: Display Port Driver data
+ *
+ * This function will handle new phy link pattern requests that are initiated
+ * by the sink. The function will return 0 if a phy link pattern has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_phy_test_pattern_request(
+		struct dp_link_private *link)
+{
+	int ret = 0;
+
+	if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) {
+		DRM_DEBUG_DP("no phy test\n");
+		return -EINVAL;
+	}
+
+	if (!is_link_rate_valid(link->request.test_link_rate) ||
+		!is_lane_count_valid(link->request.test_lane_count)) {
+		DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+		return -EINVAL;
+	}
+
+	DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
+			link->dp_link.link_params.rate,
+			link->dp_link.link_params.num_lanes);
+
+	DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
+			link->request.test_link_rate, link->request.test_lane_count);
+
+	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
+	link->dp_link.link_params.rate = link->request.test_link_rate;
+
+	ret = dp_link_parse_vx_px(link);
+	if (ret)
+		  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
+
+	return ret;
+}
+
+static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+/**
+ * dp_link_process_link_status_update() - processes link status updates
+ * @link: Display Port link module data
+ *
+ * This function will check for changes in the link status, e.g. clock
+ * recovery done on all lanes, and trigger link training if there is a
+ * failure/error on the link.
+ *
+ * The function will return 0 if the a link status update has been processed,
+ * otherwise it will return -EINVAL.
+ */
+static int dp_link_process_link_status_update(struct dp_link_private *link)
+{
+	if (!(get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+							DP_LINK_STATUS_UPDATED) ||
+			(drm_dp_clock_recovery_ok(link->link_status,
+					link->dp_link.link_params.num_lanes) &&
+			drm_dp_channel_eq_ok(link->link_status,
+					link->dp_link.link_params.num_lanes)))
+		return -EINVAL;
+
+	DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes),
+			drm_dp_clock_recovery_ok(link->link_status,
+			link->dp_link.link_params.num_lanes));
+
+	return 0;
+}
+
+/**
+ * dp_link_process_downstream_port_status_change() - process port status changes
+ * @link: Display Port Driver data
+ *
+ * This function will handle downstream port updates that are initiated by
+ * the sink. If the downstream port status has changed, the EDID is read via
+ * AUX.
+ *
+ * The function will return 0 if a downstream port update has been
+ * processed, otherwise it will return -EINVAL.
+ */
+static int dp_link_process_ds_port_status_change(struct dp_link_private *link)
+{
+	if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
+					DP_DOWNSTREAM_PORT_STATUS_CHANGED)
+		goto reset;
+
+	if (link->prev_sink_count == link->dp_link.sink_count)
+		return -EINVAL;
+
+reset:
+	/* reset prev_sink_count */
+	link->prev_sink_count = link->dp_link.sink_count;
+
+	return 0;
+}
+
+static bool dp_link_is_video_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
+		&& !(link->request.test_requested &
+		DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
+}
+
+static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link)
+{
+	return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
+}
+
+static void dp_link_reset_data(struct dp_link_private *link)
+{
+	link->request = (const struct dp_link_request){ 0 };
+	link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
+	link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
+	link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
+	link->dp_link.phy_params.phy_test_pattern_sel = 0;
+	link->dp_link.sink_request = 0;
+	link->dp_link.test_response = 0;
+}
+
+/**
+ * dp_link_process_request() - handle HPD IRQ transition to HIGH
+ * @link: pointer to link module data
+ *
+ * This function will handle the HPD IRQ state transitions from LOW to HIGH
+ * (including cases when there are back to back HPD IRQ HIGH) indicating
+ * the start of a new link training request or sink status update.
+ */
+int dp_link_process_request(struct dp_link *dp_link)
+{
+	int ret = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	mutex_lock(&link->test_response_mutex);
+	dp_link_reset_data(link);
+
+	dp_link_parse_sink_status_field(link);
+	mutex_unlock(&link->test_response_mutex);
+
+	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
+		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
+		return ret;
+	}
+
+	ret = dp_link_process_ds_port_status_change(link);
+	if (!ret) {
+		dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
+		return ret;
+	}
+
+	ret = dp_link_process_link_training_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_TRAINING;
+		return ret;
+	}
+
+	ret = dp_link_process_phy_test_pattern_request(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
+		return ret;
+	}
+
+	ret = dp_link_process_link_status_update(link);
+	if (!ret) {
+		dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
+		return ret;
+	}
+
+	if (dp_link_is_video_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
+		return -EINVAL;
+	}
+
+	if (dp_link_is_audio_pattern_requested(link)) {
+		dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+int dp_link_get_colorimetry_config(struct dp_link *dp_link)
+{
+	u32 cc;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/*
+	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
+	 * Only RGB_VESA and RGB_CEA supported for now
+	 */
+	if (dp_link_is_video_pattern_requested(link))
+		cc = link->dp_link.test_video.test_dyn_range;
+	else
+		cc = DP_TEST_DYNAMIC_RANGE_VESA;
+
+	return cc;
+}
+
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
+{
+	int i;
+	int v_max = 0, p_max = 0;
+	struct dp_link_private *link;
+
+	if (!dp_link) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	/* use the max level across lanes */
+	for (i = 0; i < dp_link->link_params.num_lanes; i++) {
+		u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
+		u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+		DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
+							i, data_v, data_p);
+		if (v_max < data_v)
+			v_max = data_v;
+		if (p_max < data_p)
+			p_max = data_p;
+	}
+
+	dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+	dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	/**
+	 * Adjust the voltage swing and pre-emphasis level combination to within
+	 * the allowable range.
+	 */
+	if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
+		DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
+			dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
+		dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
+	}
+
+	if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
+	}
+
+	if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
+		&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
+		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
+			dp_link->phy_params.p_level,
+			DP_TRAIN_PRE_EMPHASIS_LVL_1);
+		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
+	}
+
+	DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
+		dp_link->phy_params.v_level, dp_link->phy_params.p_level);
+
+	return 0;
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
+{
+	u32 tbd;
+
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Test bit depth is bit depth per color component
+	 *    2. Assume 3 color components
+	 */
+	switch (bpp) {
+	case 18:
+		tbd = DP_TEST_BIT_DEPTH_6;
+		break;
+	case 24:
+		tbd = DP_TEST_BIT_DEPTH_8;
+		break;
+	case 30:
+		tbd = DP_TEST_BIT_DEPTH_10;
+		break;
+	default:
+		tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
+		break;
+	}
+
+	if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
+		tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
+
+	return tbd;
+}
+
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
+{
+	int rc = 0;
+	struct dp_link_private *link;
+	struct dp_link *dp_link;
+
+	if (!dev || !aux) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
+	if (!link) {
+		rc = -EINVAL;
+		goto error;
+	}
+
+	link->dev   = dev;
+	link->aux   = aux;
+
+	mutex_init(&link->test_response_mutex);
+	mutex_init(&link->psm_mutex);
+	dp_link = &link->dp_link;
+
+	return dp_link;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_link_put(struct dp_link *dp_link)
+{
+	struct dp_link_private *link;
+
+	if (!dp_link)
+		return;
+
+	link = container_of(dp_link, struct dp_link_private, dp_link);
+
+	devm_kfree(link->dev, link);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
new file mode 100644
index 0000000..607904b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_link.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_LINK_H_
+#define _DP_LINK_H_
+
+#include "dp_aux.h"
+
+#define DS_PORT_STATUS_CHANGED 0x200
+#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
+
+enum dp_link_voltage_level {
+	DP_TRAIN_VOLTAGE_SWING_LVL_0	= 0,
+	DP_TRAIN_VOLTAGE_SWING_LVL_1	= 1,
+	DP_TRAIN_VOLTAGE_SWING_LVL_2	= 2,
+	DP_TRAIN_VOLTAGE_SWING_MAX	= DP_TRAIN_VOLTAGE_SWING_LVL_2,
+};
+
+enum dp_link_preemaphasis_level {
+	DP_TRAIN_PRE_EMPHASIS_LVL_0	= 0,
+	DP_TRAIN_PRE_EMPHASIS_LVL_1	= 1,
+	DP_TRAIN_PRE_EMPHASIS_LVL_2	= 2,
+	DP_TRAIN_PRE_EMPHASIS_MAX	= DP_TRAIN_PRE_EMPHASIS_LVL_2,
+};
+
+struct dp_link_test_video {
+	u32 test_video_pattern;
+	u32 test_bit_depth;
+	u32 test_dyn_range;
+	u32 test_h_total;
+	u32 test_v_total;
+	u32 test_h_start;
+	u32 test_v_start;
+	u32 test_hsync_pol;
+	u32 test_hsync_width;
+	u32 test_vsync_pol;
+	u32 test_vsync_width;
+	u32 test_h_width;
+	u32 test_v_height;
+	u32 test_rr_d;
+	u32 test_rr_n;
+};
+
+struct dp_link_test_audio {
+	u32 test_audio_sampling_rate;
+	u32 test_audio_channel_count;
+	u32 test_audio_pattern_type;
+	u32 test_audio_period_ch_1;
+	u32 test_audio_period_ch_2;
+	u32 test_audio_period_ch_3;
+	u32 test_audio_period_ch_4;
+	u32 test_audio_period_ch_5;
+	u32 test_audio_period_ch_6;
+	u32 test_audio_period_ch_7;
+	u32 test_audio_period_ch_8;
+};
+
+struct dp_link_phy_params {
+	u32 phy_test_pattern_sel;
+	u8 v_level;
+	u8 p_level;
+};
+
+struct dp_link {
+	u32 sink_request;
+	u32 test_response;
+	bool psm_enabled;
+
+	u8 sink_count;
+	struct dp_link_test_video test_video;
+	struct dp_link_test_audio test_audio;
+	struct dp_link_phy_params phy_params;
+	struct drm_dp_link link_params;
+};
+
+/**
+ * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
+ * @tbd: test bit depth
+ *
+ * Returns the bits per pixel (bpp) to be used corresponding to the
+ * git bit depth value. This function assumes that bit depth has
+ * already been validated.
+ */
+static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
+{
+	/*
+	 * Few simplistic rules and assumptions made here:
+	 *    1. Bit depth is per color component
+	 *    2. If bit depth is unknown return 0
+	 *    3. Assume 3 color components
+	 */
+	switch (tbd) {
+	case DP_TEST_BIT_DEPTH_6:
+		return 18;
+	case DP_TEST_BIT_DEPTH_8:
+		return 24;
+	case DP_TEST_BIT_DEPTH_10:
+		return 30;
+	case DP_TEST_BIT_DEPTH_UNKNOWN:
+	default:
+		return 0;
+	}
+}
+
+u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
+int dp_link_process_request(struct dp_link *dp_link);
+int dp_link_get_colorimetry_config(struct dp_link *dp_link);
+int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
+bool dp_link_send_test_response(struct dp_link *dp_link);
+int dp_link_psm_config(struct dp_link *dp_link,
+		struct drm_dp_link *link_info, bool enable);
+bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum);
+
+/**
+ * dp_link_get() - get the functionalities of dp test module
+ *
+ *
+ * return: a pointer to dp_link struct
+ */
+struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
+
+/**
+ * dp_link_put() - releases the dp test module's resources
+ *
+ * @dp_link: an instance of dp_link module
+ *
+ */
+void dp_link_put(struct dp_link *dp_link);
+
+#endif /* _DP_LINK_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
new file mode 100644
index 0000000..a3150f4
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include "dp_panel.h"
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+
+#define DP_MAX_DS_PORT_COUNT 1
+
+struct dp_panel_private {
+	struct device *dev;
+	struct dp_panel dp_panel;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+	bool panel_on;
+	bool aux_cfg_update_done;
+};
+
+static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	size_t rlen;
+	struct dp_panel_private *panel;
+	struct drm_dp_link *link_info;
+	u8 *dpcd, major = 0, minor = 0;
+	u32 dfp_count = 0;
+
+	dpcd = dp_panel->dpcd;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	link_info = &dp_panel->link_info;
+	rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
+	if (rc < 0) {
+		DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
+		return rc;
+	}
+	major = (link_info->revision >> 4) & 0x0f;
+	minor = link_info->revision & 0x0f;
+	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
+	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
+	DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
+
+	rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
+		dpcd, (DP_RECEIVER_CAP_SIZE + 1));
+	if (rlen < 0) {
+		DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
+		return -EINVAL;
+	}
+
+	dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
+						DP_DOWN_STREAM_PORT_COUNT;
+	if (dfp_count > DP_MAX_DS_PORT_COUNT) {
+		DRM_ERROR("DS port count %d greater that max (%d) supported\n",
+			dfp_count, DP_MAX_DS_PORT_COUNT);
+		return -EINVAL;
+	}
+	return rc;
+}
+
+static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct drm_dp_link *link_info;
+	const u32 max_supported_bpp = 30, min_supported_bpp = 18;
+	u32 bpp = 0, data_rate_khz = 0;
+
+	bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
+
+	link_info = &dp_panel->link_info;
+	data_rate_khz = link_info->num_lanes * link_info->rate * 8;
+
+	while (bpp > min_supported_bpp) {
+		if (mode_pclk_khz * bpp <= data_rate_khz)
+			break;
+		bpp -= 6;
+	}
+
+	return bpp;
+}
+
+static void dp_panel_set_test_mode(struct dp_panel_private *panel,
+		struct dp_display_mode *mode)
+{
+	struct drm_display_mode *drm_mode = NULL;
+	struct dp_link_test_video *test_info = NULL;
+
+	drm_mode = &mode->drm_mode;
+	test_info = &panel->link->test_video;
+
+	drm_mode->hdisplay = test_info->test_h_width;
+	drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total -
+			(test_info->test_h_start + test_info->test_h_width);
+	drm_mode->hsync_end = drm_mode->hsync_start + test_info->test_hsync_width;
+	drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
+						test_info->test_hsync_width;
+
+	drm_mode->vdisplay = test_info->test_v_height;
+	drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total -
+			(test_info->test_v_start + test_info->test_v_height);
+	drm_mode->vsync_end = drm_mode->vsync_start + test_info->test_vsync_width;
+	drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
+						test_info->test_vsync_width;
+
+	drm_mode->vrefresh = test_info->test_rr_n;
+	drm_mode->clock = test_info->test_h_total *
+		test_info->test_v_total * drm_mode->vrefresh;
+
+	drm_mode->type = 0x48;
+	drm_mode_set_name(drm_mode);
+
+	if (test_info->test_rr_d == 0)
+		drm_mode->clock /= 1000;
+	else
+		drm_mode->clock /= 1001;
+
+	if (test_info->test_h_width == 640)
+		drm_mode->clock = 25170;
+}
+
+static int dp_panel_update_modes(struct drm_connector *connector,
+	struct edid *edid)
+{
+	int rc = 0;
+
+	if (edid) {
+		rc = drm_connector_update_edid_property(connector, edid);
+		if (rc) {
+			DRM_ERROR("failed to update edid property %d\n", rc);
+			return rc;
+		}
+		rc = drm_add_edid_modes(connector, edid);
+		DRM_DEBUG_DP("%s -", __func__);
+		return rc;
+	}
+
+	rc = drm_connector_update_edid_property(connector, NULL);
+	if (rc)
+		DRM_ERROR("failed to update edid property %d\n", rc);
+
+	return rc;
+}
+
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+	struct drm_connector *connector)
+{
+	int rc = 0, bw_code;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel || !connector) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	rc = dp_panel_read_dpcd(dp_panel);
+	bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+	if (rc || !is_link_rate_valid(bw_code) ||
+			!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+			(bw_code > dp_panel->max_bw_code)) {
+		DRM_ERROR("read dpcd failed %d\n", rc);
+		return rc;
+	}
+	rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
+			      drm_dp_is_branch(dp_panel->dpcd));
+	if (rc) {
+		DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
+		return rc;
+	}
+
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = drm_get_edid(connector,
+					      &panel->aux->drm_aux->ddc);
+	if (!dp_panel->edid) {
+		DRM_ERROR("panel edid read failed\n");
+		return -EINVAL;
+	}
+
+	if (panel->aux_cfg_update_done) {
+		DRM_DEBUG_DP("read DPCD with updated AUX config\n");
+		rc = dp_panel_read_dpcd(dp_panel);
+		bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
+		if (rc || !is_link_rate_valid(bw_code) ||
+				!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
+				(bw_code > dp_panel->max_bw_code)) {
+			DRM_ERROR("read dpcd failed %d\n", rc);
+			return rc;
+		}
+		panel->aux_cfg_update_done = false;
+	}
+
+	return 0;
+}
+
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
+		u32 mode_edid_bpp, u32 mode_pclk_khz)
+{
+	struct dp_panel_private *panel;
+	u32 bpp = mode_edid_bpp;
+
+	if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
+		DRM_ERROR("invalid input\n");
+		return 0;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test)
+		bpp = dp_link_bit_depth_to_bpp(
+				panel->link->test_video.test_bit_depth);
+	else
+		bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
+				mode_pclk_khz);
+
+	return bpp;
+}
+
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+	struct drm_connector *connector, struct dp_display_mode *mode)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (dp_panel->video_test) {
+		dp_panel_set_test_mode(panel, mode);
+		return 1;
+	} else if (dp_panel->edid) {
+		return dp_panel_update_modes(connector, dp_panel->edid);
+	}
+
+	return 0;
+}
+
+u8 dp_panel_get_edid_checksum(struct edid *edid)
+{
+	struct edid *last_block;
+	u8 *raw_edid;
+	bool is_edid_corrupt;
+
+	if (!edid) {
+		DRM_ERROR("invalid edid input\n");
+		return 0;
+	}
+
+	raw_edid = (u8 *)edid;
+	raw_edid += (edid->extensions * EDID_LENGTH);
+	last_block = (struct edid *)raw_edid;
+
+	/* block type extension */
+	drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
+	if (!is_edid_corrupt)
+		return last_block->checksum;
+
+	DRM_ERROR("Invalid block, no checksum\n");
+	return 0;
+}
+
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
+		u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
+
+		dp_link_send_edid_checksum(panel->link, checksum);
+		dp_link_send_test_response(panel->link);
+	}
+}
+
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
+{
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+
+	if (!dp_panel) {
+		DRM_ERROR("invalid input\n");
+		return;
+	}
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+
+	if (!panel->panel_on) {
+		DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
+		return;
+	}
+
+	if (!enable) {
+		dp_catalog_panel_tpg_disable(catalog);
+		return;
+	}
+
+	DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
+	dp_catalog_panel_tpg_enable(catalog, &panel->dp_panel.dp_mode.drm_mode);
+}
+
+int dp_panel_timing_cfg(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	u32 data, total_ver, total_hor;
+	struct dp_catalog *catalog;
+	struct dp_panel_private *panel;
+	struct drm_display_mode *drm_mode;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+	catalog = panel->catalog;
+	drm_mode = &panel->dp_panel.dp_mode.drm_mode;
+
+	DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
+		drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
+		drm_mode->hsync_start - drm_mode->hdisplay,
+		drm_mode->hsync_end - drm_mode->hsync_start);
+
+	DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
+		drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
+		drm_mode->vsync_start - drm_mode->vdisplay,
+		drm_mode->vsync_end - drm_mode->vsync_start);
+
+	total_hor = drm_mode->htotal;
+
+	total_ver = drm_mode->vtotal;
+
+	data = total_ver;
+	data <<= 16;
+	data |= total_hor;
+
+	catalog->total = data;
+
+	data = (drm_mode->vtotal - drm_mode->vsync_start);
+	data <<= 16;
+	data |= (drm_mode->htotal - drm_mode->hsync_start);
+
+	catalog->sync_start = data;
+
+	data = drm_mode->vsync_end - drm_mode->vsync_start;
+	data <<= 16;
+	data |= (panel->dp_panel.dp_mode.v_active_low << 31);
+	data |= drm_mode->hsync_end - drm_mode->hsync_start;
+	data |= (panel->dp_panel.dp_mode.h_active_low << 15);
+
+	catalog->width_blanking = data;
+
+	data = drm_mode->vdisplay;
+	data <<= 16;
+	data |= drm_mode->hdisplay;
+
+	catalog->dp_active = data;
+
+	dp_catalog_panel_timing_cfg(catalog);
+	panel->panel_on = true;
+
+	return rc;
+}
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel)
+{
+	int rc = 0;
+	struct drm_display_mode *drm_mode;
+
+	drm_mode = &dp_panel->dp_mode.drm_mode;
+
+	/*
+	 * print resolution info as this is a result
+	 * of user initiated action of cable connection
+	 */
+	DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
+	DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
+		drm_mode->vdisplay, drm_mode->vrefresh);
+	DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->htotal - drm_mode->hsync_end,
+			drm_mode->hsync_start - drm_mode->hdisplay,
+			drm_mode->hsync_end - drm_mode->hsync_start);
+	DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
+			drm_mode->vtotal - drm_mode->vsync_end,
+			drm_mode->vsync_start - drm_mode->vdisplay,
+			drm_mode->vsync_end - drm_mode->vsync_start);
+	DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
+	DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32, dp_panel->dp_mode.bpp, 30));
+	DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
+
+	return rc;
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in)
+{
+	int rc = 0;
+	struct dp_panel_private *panel;
+	struct dp_panel *dp_panel;
+
+	if (!in->dev || !in->catalog || !in->aux || !in->link) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
+	if (!panel) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	panel->dev = in->dev;
+	panel->aux = in->aux;
+	panel->catalog = in->catalog;
+	panel->link = in->link;
+
+	dp_panel = &panel->dp_panel;
+	dp_panel->max_bw_code = DP_LINK_BW_8_1;
+	panel->aux_cfg_update_done = false;
+
+	return dp_panel;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_panel_put(struct dp_panel *dp_panel)
+{
+	struct dp_panel_private *panel;
+
+	if (!dp_panel)
+		return;
+
+	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
+
+	kfree(dp_panel->edid);
+	dp_panel->edid = NULL;
+	devm_kfree(panel->dev, panel);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
new file mode 100644
index 0000000..68c5650
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PANEL_H_
+#define _DP_PANEL_H_
+
+#include <drm/msm_drm.h>
+
+#include "dp_aux.h"
+#include "dp_link.h"
+#include "dp_extcon.h"
+
+struct edid;
+
+#define DP_MAX_DOWNSTREAM_PORTS 0x10
+
+struct dp_display_mode {
+	struct drm_display_mode drm_mode;
+	u32 capabilities;
+	u32 bpp;
+	u32 h_active_low;
+	u32 v_active_low;
+};
+
+struct dp_panel_in {
+	struct device *dev;
+	struct dp_aux *aux;
+	struct dp_link *link;
+	struct dp_catalog *catalog;
+};
+
+struct dp_panel {
+	/* dpcd raw data */
+	u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
+
+	struct drm_dp_link link_info;
+	struct drm_dp_desc desc;
+	struct edid *edid;
+	struct drm_connector *connector;
+	struct dp_display_mode dp_mode;
+	bool video_test;
+
+	u32 vic;
+	u32 max_pclk_khz;
+
+	u32 max_bw_code;
+};
+
+int dp_panel_init_panel_info(struct dp_panel *dp_panel);
+int dp_panel_deinit(struct dp_panel *dp_panel);
+int dp_panel_timing_cfg(struct dp_panel *dp_panel);
+int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
+		struct drm_connector *connector);
+u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 mode_max_bpp,
+			u32 mode_pclk_khz);
+int dp_panel_get_modes(struct dp_panel *dp_panel,
+		struct drm_connector *connector, struct dp_display_mode *mode);
+void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
+void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
+
+/**
+ * is_link_rate_valid() - validates the link rate
+ * @lane_rate: link rate requested by the sink
+ *
+ * Returns true if the requested link rate is supported.
+ */
+static inline bool is_link_rate_valid(u32 bw_code)
+{
+	return (bw_code == DP_LINK_BW_1_62 ||
+		bw_code == DP_LINK_BW_2_7 ||
+		bw_code == DP_LINK_BW_5_4 ||
+		bw_code == DP_LINK_BW_8_1);
+}
+
+/**
+ * dp_link_is_lane_count_valid() - validates the lane count
+ * @lane_count: lane count requested by the sink
+ *
+ * Returns true if the requested lane count is supported.
+ */
+static inline bool is_lane_count_valid(u32 lane_count)
+{
+	return (lane_count == 1 ||
+		lane_count == 2 ||
+		lane_count == 4);
+}
+
+struct dp_panel *dp_panel_get(struct dp_panel_in *in);
+void dp_panel_put(struct dp_panel *dp_panel);
+#endif /* _DP_PANEL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
new file mode 100644
index 0000000..3fa2a1f
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/of_gpio.h>
+
+#include "dp_parser.h"
+
+static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
+	.num = 2,
+	.regs = {
+		{"vdda-1p2", 21800, 4 },	/* 1.2 V */
+		{"vdda-0p9", 36000, 32 },	/* 0.9 V */
+	},
+};
+
+static int msm_dss_ioremap_byname(struct platform_device *pdev,
+			   struct dss_io_data *io_data, const char *name)
+{
+	struct resource *res = NULL;
+
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!res) {
+		DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -ENODEV;
+	}
+
+	io_data->len = (u32)resource_size(res);
+	io_data->base = ioremap(res->start, io_data->len);
+	if (!io_data->base) {
+		DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
+			__builtin_return_address(0), __func__, name);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void msm_dss_iounmap(struct dss_io_data *io_data)
+{
+	if (!io_data) {
+		DRM_ERROR("%pS->%s: invalid input\n",
+			__builtin_return_address(0), __func__);
+		return;
+	}
+
+	if (io_data->base) {
+		iounmap(io_data->base);
+		io_data->base = NULL;
+	}
+	io_data->len = 0;
+}
+
+static void dp_parser_unmap_io_resources(struct dp_parser *parser)
+{
+	struct dp_io *io = &parser->io;
+
+	msm_dss_iounmap(&io->dp_ahb);
+	msm_dss_iounmap(&io->dp_aux);
+	msm_dss_iounmap(&io->dp_link);
+	msm_dss_iounmap(&io->dp_p0);
+	msm_dss_iounmap(&io->phy_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->ln_tx0_io);
+	msm_dss_iounmap(&io->dp_pll_io);
+	msm_dss_iounmap(&io->dp_cc_io);
+	msm_dss_iounmap(&io->usb3_dp_com);
+	msm_dss_iounmap(&io->qfprom_io);
+}
+
+static int dp_parser_ctrl_res(struct dp_parser *parser)
+{
+	int rc = 0;
+	u32 index;
+	struct platform_device *pdev = parser->pdev;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	struct dp_io *io = &parser->io;
+
+	rc = of_property_read_u32(of_node, "cell-index", &index);
+	if (rc) {
+		DRM_ERROR("cell-index not specified, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
+	if (rc) {
+		DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
+	if (rc) {
+		DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
+	if (rc) {
+		DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
+	if (rc) {
+		DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
+		goto err;
+	}
+
+	rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
+	if (rc) {
+		DRM_ERROR("unable to remap dp MMSS_CC resources\n");
+		goto err;
+	}
+
+	if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
+		pr_warn("unable to remap dp qfprom resources\n");
+
+	return 0;
+err:
+	dp_parser_unmap_io_resources(parser);
+	return rc;
+}
+
+static const char *dp_get_phy_aux_config_property(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return "qcom,aux-cfg0-settings";
+	case PHY_AUX_CFG1:
+		return "qcom,aux-cfg1-settings";
+	case PHY_AUX_CFG2:
+		return "qcom,aux-cfg2-settings";
+	case PHY_AUX_CFG3:
+		return "qcom,aux-cfg3-settings";
+	case PHY_AUX_CFG4:
+		return "qcom,aux-cfg4-settings";
+	case PHY_AUX_CFG5:
+		return "qcom,aux-cfg5-settings";
+	case PHY_AUX_CFG6:
+		return "qcom,aux-cfg6-settings";
+	case PHY_AUX_CFG7:
+		return "qcom,aux-cfg7-settings";
+	case PHY_AUX_CFG8:
+		return "qcom,aux-cfg8-settings";
+	case PHY_AUX_CFG9:
+		return "qcom,aux-cfg9-settings";
+	default:
+		return "unknown";
+	}
+}
+
+static int dp_parser_aux(struct dp_parser *parser)
+{
+	struct device_node *of_node = parser->pdev->dev.of_node;
+	int len = 0, i = 0, j = 0, config_count = 0;
+	const char *data;
+
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		const char *property = dp_get_phy_aux_config_property(i);
+
+		data = of_get_property(of_node, property, &len);
+		if (!data) {
+			DRM_ERROR("Unable to read %s\n", property);
+			goto error;
+		}
+
+		config_count = len - 1;
+		if (config_count < 1 || /* minimum config count = 1 */
+			config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
+			DRM_ERROR("Invalid config count (%d) configs for %s\n",
+					config_count, property);
+			goto error;
+		}
+
+		parser->aux_cfg[i].offset = data[0];
+		parser->aux_cfg[i].cfg_cnt = config_count;
+		DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
+				property,
+				parser->aux_cfg[i].offset,
+				parser->aux_cfg[i].cfg_cnt);
+		for (j = 1; j < len; j++) {
+			parser->aux_cfg[i].lut[j - 1] = data[j];
+			DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
+					property,
+					i,
+					parser->aux_cfg[i].lut[j - 1]);
+		}
+	}
+		return 0;
+
+error:
+	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
+		parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
+	}
+	return -EINVAL;
+}
+
+static int dp_parser_misc(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct device_node *of_node = parser->pdev->dev.of_node;
+
+	rc = of_property_read_u32(of_node,
+		"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
+	if (rc)
+		parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
+
+	return 0;
+}
+
+static int dp_parser_pinctrl(struct dp_parser *parser)
+{
+	struct dp_pinctrl *pinctrl = &parser->pinctrl;
+
+	pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
+
+	if (IS_ERR_OR_NULL(pinctrl->pin)) {
+		DRM_ERROR("failed to get pinctrl, rc=%d\n",
+					PTR_ERR_OR_ZERO(pinctrl->pin));
+		return -EINVAL;
+	}
+
+	pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_active");
+	if (IS_ERR_OR_NULL(pinctrl->state_active)) {
+		DRM_ERROR("failed to get pinctrl active state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_active));
+		return -EINVAL;
+	}
+
+	pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
+					"mdss_dp_sleep");
+	if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
+		DRM_ERROR("failed to get pinctrl suspend state, %d\n",
+			PTR_ERR_OR_ZERO(pinctrl->state_suspend));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_gpio(struct dp_parser *parser)
+{
+	struct device *dev = &parser->pdev->dev;
+	struct device_node *of_node = dev->of_node;
+
+	parser->usbplug_cc_gpio = of_get_named_gpio(of_node, "qcom,usbplug-cc-gpio", 0);
+	if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
+			DRM_ERROR("usbplug-cc-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio", 0);
+	if (!gpio_is_valid(parser->aux_en_gpio)) {
+			DRM_ERROR("aux-en-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	parser->aux_sel_gpio = of_get_named_gpio(of_node, "qcom,aux-sel-gpio", 0);
+	if (!gpio_is_valid(parser->aux_sel_gpio)) {
+			DRM_ERROR("aux-sel-gpio not specified\n");
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline bool dp_parser_check_prefix(const char *clk_prefix, const char *clk_name)
+{
+	return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
+}
+
+static int dp_parser_init_clk_data(struct dp_parser *parser)
+{
+	int num_clk = 0, i = 0, rc = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	num_clk = of_property_count_strings(dev->of_node, "clock-names");
+	if (num_clk <= 0) {
+		DRM_ERROR("no clocks are defined\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node,
+				"clock-names", i, &clk_name);
+		if (rc) {
+			DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+
+		if (dp_parser_check_prefix("core", clk_name))
+			core_clk_count++;
+
+		if (dp_parser_check_prefix("ctrl", clk_name))
+			ctrl_clk_count++;
+	}
+
+	/* Initialize the CORE power module */
+	if (core_clk_count == 0) {
+		DRM_ERROR("no core clocks are defined\n");
+		return -EINVAL;
+	}
+
+	core_power->num_clk = core_clk_count;
+	core_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * core_power->num_clk,
+			GFP_KERNEL);
+	if (!core_power->clk_config) {
+		return -EINVAL;
+	}
+
+	/* Initialize the CTRL power module */
+	if (ctrl_clk_count == 0) {
+		DRM_ERROR("no ctrl clocks are defined\n");
+		return -EINVAL;
+	}
+
+	ctrl_power->num_clk = ctrl_clk_count;
+	ctrl_power->clk_config = devm_kzalloc(dev,
+			sizeof(struct dss_clk) * ctrl_power->num_clk,
+			GFP_KERNEL);
+	if (!ctrl_power->clk_config) {
+		ctrl_power->num_clk = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dp_parser_clock(struct dp_parser *parser)
+{
+	int rc = 0, i = 0;
+	int num_clk = 0;
+	int core_clk_index = 0, ctrl_clk_index = 0;
+	int core_clk_count = 0, ctrl_clk_count = 0;
+	const char *clk_name;
+	struct device *dev = &parser->pdev->dev;
+	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
+	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	core_power = &parser->mp[DP_CORE_PM];
+	ctrl_power = &parser->mp[DP_CTRL_PM];
+
+	rc =  dp_parser_init_clk_data(parser);
+	if (rc) {
+		DRM_ERROR("failed to initialize power data %d\n", rc);
+		return -EINVAL;
+	}
+
+	core_clk_count = core_power->num_clk;
+	ctrl_clk_count = ctrl_power->num_clk;
+
+	num_clk = core_clk_count + ctrl_clk_count;
+
+	for (i = 0; i < num_clk; i++) {
+		rc = of_property_read_string_index(dev->of_node, "clock-names",
+				i, &clk_name);
+		if (rc) {
+			 DRM_ERROR("error reading clock-names %d\n", rc);
+			return rc;
+		}
+		if (dp_parser_check_prefix("core", clk_name) &&
+				core_clk_index < core_clk_count) {
+			struct dss_clk *clk =
+				&core_power->clk_config[core_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			clk->type = DSS_CLK_AHB;
+			core_clk_index++;
+		} else if (dp_parser_check_prefix("ctrl", clk_name) &&
+			   ctrl_clk_index < ctrl_clk_count) {
+			struct dss_clk *clk =
+				&ctrl_power->clk_config[ctrl_clk_index];
+			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
+			ctrl_clk_index++;
+
+			if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
+			  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
+				clk->type = DSS_CLK_PCLK;
+			else
+				clk->type = DSS_CLK_AHB;
+		}
+	}
+
+	DRM_DEBUG_DP("clock parsing successful\n");
+
+	return 0;
+}
+
+static int dp_parser_parse(struct dp_parser *parser)
+{
+	int rc = 0;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		return -EINVAL;
+	}
+
+	/* Default: We assume that PHY is shared between USB and DP (Combo phy) */
+	parser->combo_phy_en = true;
+
+	rc = dp_parser_ctrl_res(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_aux(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_misc(parser);
+	if (rc)
+		return rc;
+
+	rc = dp_parser_clock(parser);
+	if (rc)
+		return rc;
+
+	/* Map the corresponding regulator information according to
+	 * version. Currently, since we only have one supported platform,
+	 * mapping the regulator directly.
+	 */
+	parser->regulator_cfg = &sdm845_dp_reg_cfg;
+
+	rc = dp_parser_gpio(parser);
+	if (rc) {
+		DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is disabled\n");
+		parser->combo_phy_en = false;
+		return rc;
+	}
+
+	rc = dp_parser_pinctrl(parser);
+	return rc;
+}
+
+struct dp_parser *dp_parser_get(struct platform_device *pdev)
+{
+	struct dp_parser *parser;
+
+	parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
+	if (!parser)
+		return ERR_PTR(-ENOMEM);
+
+	parser->parse = dp_parser_parse;
+	parser->pdev = pdev;
+
+	return parser;
+}
+
+void dp_parser_put(struct dp_parser *parser)
+{
+
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
new file mode 100644
index 0000000..b606b40
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_PARSER_H_
+#define _DP_PARSER_H_
+
+#define DP_LABEL "MDSS DP DISPLAY"
+#define AUX_CFG_LEN	10
+#define DP_MAX_PIXEL_CLK_KHZ	675000
+
+enum dp_pm_type {
+	DP_CORE_PM,
+	DP_CTRL_PM,
+	DP_PHY_PM,
+	DP_MAX_PM
+};
+
+struct dss_io_data {
+	u32 len;
+	void __iomem *base;
+};
+
+static inline const char *dp_parser_pm_name(enum dp_pm_type module)
+{
+	switch (module) {
+	case DP_CORE_PM:	return "DP_CORE_PM";
+	case DP_CTRL_PM:	return "DP_CTRL_PM";
+	case DP_PHY_PM:		return "DP_PHY_PM";
+	default:		return "???";
+	}
+}
+
+/**
+ * struct dp_display_data  - display related device tree data.
+ *
+ * @ctrl_node: referece to controller device
+ * @phy_node:  reference to phy device
+ * @is_active: is the controller currently active
+ * @name: name of the display
+ * @display_type: type of the display
+ */
+struct dp_display_data {
+	struct device_node *ctrl_node;
+	struct device_node *phy_node;
+	bool is_active;
+	const char *name;
+	const char *display_type;
+};
+
+/**
+ * struct dp_ctrl_resource - controller's IO related data
+ *
+ * @dp_ahb: controller's ahb mapped memory address
+ * @dp_aux: controller's aux mapped memory address
+ * @dp_link: controller's link mapped memory address
+ * @dp_p0: controller's p0 mapped memory address
+ * @phy_io: phy's mapped memory address
+ * @ln_tx0_io: USB-DP lane TX0's mapped memory address
+ * @ln_tx1_io: USB-DP lane TX1's mapped memory address
+ * @dp_cc_io: DP cc's mapped memory address
+ * @qfprom_io: qfprom's mapped memory address
+ * @dp_pll_io: DP PLL mapped memory address
+ * @usb3_dp_com: USB3 DP PHY combo mapped memory address
+ */
+struct dp_io {
+	struct dss_io_data ctrl_io;
+	struct dss_io_data dp_ahb;
+	struct dss_io_data dp_aux;
+	struct dss_io_data dp_link;
+	struct dss_io_data dp_p0;
+	struct dss_io_data phy_io;
+	struct dss_io_data ln_tx0_io;
+	struct dss_io_data ln_tx1_io;
+	struct dss_io_data dp_cc_io;
+	struct dss_io_data qfprom_io;
+	struct dss_io_data dp_pll_io;
+	struct dss_io_data usb3_dp_com;
+};
+
+/**
+ * struct dp_pinctrl - DP's pin control
+ *
+ * @pin: pin-controller's instance
+ * @state_active: active state pin control
+ * @state_hpd_active: hpd active state pin control
+ * @state_suspend: suspend state pin control
+ */
+struct dp_pinctrl {
+	struct pinctrl *pin;
+	struct pinctrl_state *state_active;
+	struct pinctrl_state *state_hpd_active;
+	struct pinctrl_state *state_suspend;
+};
+
+#define DP_ENUM_STR(x)	#x
+#define DP_AUX_CFG_MAX_VALUE_CNT 3
+/**
+ * struct dp_aux_cfg - DP's AUX configuration settings
+ *
+ * @cfg_cnt: count of the configurable settings for the AUX register
+ * @current_index: current index of the AUX config lut
+ * @offset: register offset of the AUX config register
+ * @lut: look up table for the AUX config values for this register
+ */
+struct dp_aux_cfg {
+	u32 cfg_cnt;
+	u32 current_index;
+	u32 offset;
+	u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
+};
+
+/* PHY AUX config registers */
+enum dp_phy_aux_config_type {
+	PHY_AUX_CFG0,
+	PHY_AUX_CFG1,
+	PHY_AUX_CFG2,
+	PHY_AUX_CFG3,
+	PHY_AUX_CFG4,
+	PHY_AUX_CFG5,
+	PHY_AUX_CFG6,
+	PHY_AUX_CFG7,
+	PHY_AUX_CFG8,
+	PHY_AUX_CFG9,
+	PHY_AUX_CFG_MAX,
+};
+
+#define DP_DEV_REGULATOR_MAX	4
+
+/* Regulators for DP devices */
+struct dp_reg_entry {
+	char name[32];
+	int enable_load;
+	int disable_load;
+};
+
+struct dp_regulator_cfg {
+	int num;
+	struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
+};
+
+
+static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
+{
+	switch (cfg_type) {
+	case PHY_AUX_CFG0:
+		return DP_ENUM_STR(PHY_AUX_CFG0);
+	case PHY_AUX_CFG1:
+		return DP_ENUM_STR(PHY_AUX_CFG1);
+	case PHY_AUX_CFG2:
+		return DP_ENUM_STR(PHY_AUX_CFG2);
+	case PHY_AUX_CFG3:
+		return DP_ENUM_STR(PHY_AUX_CFG3);
+	case PHY_AUX_CFG4:
+		return DP_ENUM_STR(PHY_AUX_CFG4);
+	case PHY_AUX_CFG5:
+		return DP_ENUM_STR(PHY_AUX_CFG5);
+	case PHY_AUX_CFG6:
+		return DP_ENUM_STR(PHY_AUX_CFG6);
+	case PHY_AUX_CFG7:
+		return DP_ENUM_STR(PHY_AUX_CFG7);
+	case PHY_AUX_CFG8:
+		return DP_ENUM_STR(PHY_AUX_CFG8);
+	case PHY_AUX_CFG9:
+		return DP_ENUM_STR(PHY_AUX_CFG9);
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * struct dp_parser - DP parser's data exposed to clients
+ *
+ * @pdev: platform data of the client
+ * @mp: gpio, regulator and clock related data
+ * @pinctrl: pin-control related data
+ * @aux_en_gpio: GPIO to control AUX data when using combo PHY
+ * @aux_sel_gpio: GPIO to control plug orientation when using combo PHY
+ * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
+ * @combo_phy_en: Boolean to check whether combo PHY is used
+ * @disp_data: controller's display related data
+ * @parse: function to be called by client to parse device tree.
+ */
+struct dp_parser {
+	struct platform_device *pdev;
+	struct dss_module_power mp[DP_MAX_PM];
+	struct dp_pinctrl pinctrl;
+	unsigned int aux_en_gpio;
+	unsigned int aux_sel_gpio;
+	unsigned int usbplug_cc_gpio;
+	bool combo_phy_en;
+	struct dp_io io;
+	struct dp_display_data disp_data;
+	const struct dp_regulator_cfg *regulator_cfg;
+	u8 l_map[4];
+	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
+	u32 max_pclk_khz;
+
+	int (*parse)(struct dp_parser *parser);
+};
+
+/**
+ * dp_parser_get() - get the DP's device tree parser module
+ *
+ * @pdev: platform data of the client
+ * return: pointer to dp_parser structure.
+ *
+ * This function provides client capability to parse the
+ * device tree and populate the data structures. The data
+ * related to clock, regulators, pin-control and other
+ * can be parsed using this module.
+ */
+struct dp_parser *dp_parser_get(struct platform_device *pdev);
+
+/**
+ * dp_parser_put() - cleans the dp_parser module
+ *
+ * @parser: pointer to the parser's data.
+ */
+void dp_parser_put(struct dp_parser *parser);
+#endif
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
new file mode 100644
index 0000000..3fa4c9b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_gpio.h>
+#include "dp_power.h"
+
+struct dp_power_private {
+	struct dp_parser *parser;
+	struct platform_device *pdev;
+	struct clk *pixel_clk_rcg;
+	struct clk *link_clk_src;
+	struct clk *pixel_provider;
+	struct clk *link_provider;
+	struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
+
+	struct dp_power dp_power;
+};
+
+static void dp_power_regulator_disable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer,
+					   regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dp_power_regulator_enable(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	int num = power->parser->regulator_cfg->num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+						 regs[i].enable_load);
+			if (ret < 0) {
+				pr_err("regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		pr_err("regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
+static int dp_power_regulator_init(struct dp_power_private *power)
+{
+	struct regulator_bulk_data *s = power->supplies;
+	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
+	struct platform_device *pdev = power->pdev;
+	int num = power->parser->regulator_cfg->num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(&pdev->dev, num, s);
+	if (ret < 0) {
+		pr_err("%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dp_power_pinctrl_set(struct dp_power_private *power, bool active)
+{
+	int rc = -EFAULT;
+	struct pinctrl_state *pin_state;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return 0;
+
+	pin_state = active ? parser->pinctrl.state_active
+				: parser->pinctrl.state_suspend;
+
+	rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
+	if (rc) {
+		DRM_ERROR("can not set %s pins\n",
+			active ? "dp_active" : "dp_sleep");
+		return rc;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_init(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct dss_module_power *core, *ctrl;
+	struct device *dev = &power->pdev->dev;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (power->parser->pll && power->parser->pll->get_provider) {
+		rc = power->parser->pll->get_provider(power->parser->pll,
+				&power->link_provider, &power->pixel_provider);
+		if (rc) {
+			pr_info("%s: can't get provider from pll, don't set parent\n",
+				__func__);
+			return 0;
+		}
+	}
+
+	rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CORE_PM), rc);
+		return rc;
+	}
+
+	rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
+	if (rc) {
+		DRM_ERROR("failed to get %s clk. err=%d\n",
+			dp_parser_pm_name(DP_CTRL_PM), rc);
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
+	if (IS_ERR(power->pixel_clk_rcg)) {
+		DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
+		power->pixel_clk_rcg = NULL;
+		msm_dss_put_clk(core->clk_config, core->num_clk);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int dp_power_clk_deinit(struct dp_power_private *power)
+{
+	struct dss_module_power *core, *ctrl;
+
+	core = &power->parser->mp[DP_CORE_PM];
+	ctrl = &power->parser->mp[DP_CTRL_PM];
+
+	if (!core || !ctrl) {
+		DRM_ERROR("invalid power_data\n");
+		return -EINVAL;
+	}
+
+	msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
+	msm_dss_put_clk(core->clk_config, core->num_clk);
+	return 0;
+}
+
+static int dp_power_clk_set_rate(struct dp_power_private *power,
+		enum dp_pm_type module, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp = &power->parser->mp[module];
+
+	if (enable) {
+		rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
+		if (rc) {
+			DRM_ERROR("failed to set clks rate.\n");
+			return rc;
+		}
+	}
+
+	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
+	if (rc) {
+		DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+int dp_power_clk_enable(struct dp_power *dp_power,
+		enum dp_pm_type pm_type, bool enable)
+{
+	int rc = 0;
+	struct dss_module_power *mp;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+	mp = &power->parser->mp[pm_type];
+
+	if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
+		DRM_ERROR("unsupported power module: %s\n",
+				dp_parser_pm_name(pm_type));
+		return -EINVAL;
+	}
+
+	if (enable) {
+		if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
+			DRM_DEBUG_DP("core clks already enabled\n");
+			return 0;
+		}
+
+		if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
+			DRM_DEBUG_DP("links clks already enabled\n");
+			return 0;
+		}
+
+		if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
+			DRM_DEBUG_DP("Need to enable core clks before link clks\n");
+
+			rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
+			if (rc) {
+				DRM_ERROR("failed to enable clks: %s. err=%d\n",
+					dp_parser_pm_name(DP_CORE_PM), rc);
+				return rc;
+			}
+			dp_power->core_clks_on = true;
+		}
+	}
+
+	rc = dp_power_clk_set_rate(power, pm_type, enable);
+	if (rc) {
+		DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type), rc);
+			return rc;
+	}
+
+	if (pm_type == DP_CORE_PM)
+		dp_power->core_clks_on = enable;
+	else
+		dp_power->link_clks_on = enable;
+
+	DRM_DEBUG_DP("%s clocks for %s\n",
+			enable ? "enable" : "disable",
+			dp_parser_pm_name(pm_type));
+	DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
+		dp_power->link_clks_on ? "on" : "off",
+		dp_power->core_clks_on ? "on" : "off");
+
+	return 0;
+}
+
+static int dp_power_request_gpios(struct dp_power_private *power)
+{
+	int rc = 0;
+	struct device *dev = &power->pdev->dev;
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_en_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
+		if (rc) {
+			DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->aux_sel_gpio)) {
+		rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
+		if (rc) {
+			DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	if (gpio_is_valid(parser->usbplug_cc_gpio)) {
+		rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
+		if (rc) {
+			DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static void dp_power_set_gpio(struct dp_power_private *power, bool flip)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (gpio_is_valid(parser->aux_sel_gpio))
+		gpio_direction_output(parser->aux_sel_gpio, flip);
+
+	if (gpio_is_valid(parser->aux_en_gpio))
+		gpio_direction_output(parser->aux_en_gpio, 0);
+
+	if (gpio_is_valid(parser->usbplug_cc_gpio))
+		gpio_set_value(parser->usbplug_cc_gpio, 0);
+}
+
+static int dp_power_config_gpios(struct dp_power_private *power, bool flip)
+{
+	int rc = 0;
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return rc;
+
+	rc = dp_power_request_gpios(power);
+	if (rc) {
+		DRM_ERROR("gpio request failed\n");
+		return rc;
+	}
+
+	dp_power_set_gpio(power, flip);
+	return 0;
+}
+
+static void dp_power_disable_gpios(struct dp_power_private *power)
+{
+	struct dp_parser *parser = power->parser;
+
+	if (!parser->combo_phy_en)
+		return;
+
+	gpio_set_value(parser->aux_sel_gpio, 0);
+	gpio_set_value(parser->aux_en_gpio, 0);
+	gpio_set_value(parser->usbplug_cc_gpio, 0);
+	gpio_free(parser->aux_sel_gpio);
+	gpio_free(parser->aux_en_gpio);
+	gpio_free(parser->usbplug_cc_gpio);
+}
+
+int dp_power_client_init(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return -EINVAL;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_enable(&power->pdev->dev);
+
+	rc = dp_power_regulator_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init regulators %d\n", rc);
+		goto error;
+	}
+
+	rc = dp_power_clk_init(power);
+	if (rc) {
+		DRM_ERROR("failed to init clocks %d\n", rc);
+		goto error;
+	}
+	return 0;
+
+error:
+	pm_runtime_disable(&power->pdev->dev);
+	return rc;
+}
+
+void dp_power_client_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		return;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_deinit(power);
+	pm_runtime_disable(&power->pdev->dev);
+
+}
+
+int dp_power_set_link_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	u32 num;
+	struct dss_clk *cfg;
+	char *name = "ctrl_link_clk";
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	num = power->parser->mp[DP_CTRL_PM].num_clk;
+	cfg = power->parser->mp[DP_CTRL_PM].clk_config;
+
+	while (num && strcmp(cfg->clk_name, name)) {
+		num--;
+		cfg++;
+	}
+
+	if (num && power->link_provider) {
+		power->link_clk_src = clk_get_parent(cfg->clk);
+			if (power->link_clk_src) {
+				clk_set_parent(power->link_clk_src, power->link_provider);
+				DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+						__clk_get_name(power->link_provider),
+						__clk_get_name(power->link_clk_src));
+			} else {
+				DRM_ERROR("couldn't get parent for clk=%s\n", name);
+				rc = -EINVAL;
+			}
+	} else {
+		DRM_ERROR("%s clock could not be set parent\n", name);
+		rc = -EINVAL;
+	}
+exit:
+	return rc;
+}
+
+int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	if (power->pixel_clk_rcg && power->pixel_provider) {
+		rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
+		if (rc) {
+			DRM_ERROR("failed to set parent clk src, %d\n", rc);
+			return rc;
+		}
+		DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
+					__clk_get_name(power->pixel_provider),
+					__clk_get_name(power->pixel_clk_rcg));
+	}
+
+	return 0;
+}
+
+int dp_power_init(struct dp_power *dp_power, bool flip)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+
+	if (!dp_power) {
+		DRM_ERROR("invalid power data\n");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	pm_runtime_get_sync(&power->pdev->dev);
+	rc = dp_power_regulator_enable(power);
+	if (rc) {
+		DRM_ERROR("failed to enable regulators, %d\n", rc);
+		goto exit;
+	}
+
+	rc = dp_power_pinctrl_set(power, true);
+	if (rc) {
+		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
+		goto err_pinctrl;
+	}
+
+	rc = dp_power_config_gpios(power, flip);
+	if (rc) {
+		DRM_ERROR("failed to enable gpios, %d\n", rc);
+		goto err_gpio;
+	}
+
+	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
+	if (rc) {
+		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	dp_power_disable_gpios(power);
+err_gpio:
+	dp_power_pinctrl_set(power, false);
+err_pinctrl:
+	dp_power_regulator_disable(power);
+exit:
+	pm_runtime_put_sync(&power->pdev->dev);
+	return rc;
+}
+
+int dp_power_deinit(struct dp_power *dp_power)
+{
+	struct dp_power_private *power;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	dp_power_clk_enable(dp_power, DP_CORE_PM, false);
+	dp_power_disable_gpios(power);
+	dp_power_pinctrl_set(power, false);
+	dp_power_regulator_disable(power);
+	pm_runtime_put_sync(&power->pdev->dev);
+	return 0;
+}
+
+struct dp_power *dp_power_get(struct dp_parser *parser)
+{
+	int rc = 0;
+	struct dp_power_private *power;
+	struct dp_power *dp_power;
+
+	if (!parser) {
+		DRM_ERROR("invalid input\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
+	if (!power) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	power->parser = parser;
+	power->pdev = parser->pdev;
+
+	dp_power = &power->dp_power;
+
+	return dp_power;
+error:
+	return ERR_PTR(rc);
+}
+
+void dp_power_put(struct dp_power *dp_power)
+{
+	struct dp_power_private *power = NULL;
+
+	if (!dp_power)
+		return;
+
+	power = container_of(dp_power, struct dp_power_private, dp_power);
+
+	devm_kfree(&power->pdev->dev, power);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
new file mode 100644
index 0000000..40d7e73
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_POWER_H_
+#define _DP_POWER_H_
+
+#include "dp_parser.h"
+
+/**
+ * sruct dp_power - DisplayPort's power related data
+ *
+ * @init: initializes the regulators/core clocks/GPIOs/pinctrl
+ * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
+ * @clk_enable: enable/disable the DP clocks
+ * @set_link_clk_parent: set the parent of DP link clock
+ * @set_pixel_clk_parent: set the parent of DP pixel clock
+ */
+struct dp_power {
+	bool core_clks_on;
+	bool link_clks_on;
+};
+
+int dp_power_init(struct dp_power *power, bool flip);
+int dp_power_deinit(struct dp_power *power);
+int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
+				bool enable);
+int dp_power_set_link_clk_parent(struct dp_power *power);
+int dp_power_set_pixel_clk_parent(struct dp_power *power);
+int dp_power_client_init(struct dp_power *power);
+void dp_power_client_deinit(struct dp_power *power);
+
+/**
+ * dp_power_get() - configure and get the DisplayPort power module data
+ *
+ * @parser: instance of parser module
+ * return: pointer to allocated power module data
+ *
+ * This API will configure the DisplayPort's power module and provides
+ * methods to be called by the client to configure the power related
+ * modueles.
+ */
+struct dp_power *dp_power_get(struct dp_parser *parser);
+
+/**
+ * dp_power_put() - release the power related resources
+ *
+ * @power: pointer to the power module's data
+ */
+void dp_power_put(struct dp_power *power);
+#endif /* _DP_POWER_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
new file mode 100644
index 0000000..5468f7b
--- /dev/null
+++ b/drivers/gpu/drm/msm/dp/dp_reg.h
@@ -0,0 +1,488 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DP_REG_H_
+#define _DP_REG_H_
+
+/* DP_TX Registers */
+#define REG_DP_HW_VERSION			(0x00000000)
+
+#define REG_DP_SW_RESET				(0x00000010)
+#define DP_SW_RESET				(0x00000001)
+
+#define REG_DP_PHY_CTRL				(0x00000014)
+#define DP_PHY_CTRL_SW_RESET_PLL		(0x00000001)
+#define DP_PHY_CTRL_SW_RESET			(0x00000004)
+
+#define REG_DP_CLK_CTRL				(0x00000018)
+#define REG_DP_CLK_ACTIVE			(0x0000001C)
+#define REG_DP_INTR_STATUS			(0x00000020)
+#define REG_DP_INTR_STATUS2			(0x00000024)
+#define REG_DP_INTR_STATUS3			(0x00000028)
+
+#define REG_DP_DP_HPD_CTRL			(0x00000000)
+#define DP_DP_HPD_CTRL_HPD_EN			(0x00000001)
+
+#define REG_DP_DP_HPD_INT_STATUS		(0x00000004)
+
+#define REG_DP_DP_HPD_INT_ACK			(0x00000008)
+#define DP_DP_HPD_PLUG_INT_ACK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_ACK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_ACK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_ACK		(0x00000008)
+
+#define REG_DP_DP_HPD_INT_MASK			(0x0000000C)
+#define DP_DP_HPD_PLUG_INT_MASK			(0x00000001)
+#define DP_DP_IRQ_HPD_INT_MASK			(0x00000002)
+#define DP_DP_HPD_REPLUG_INT_MASK		(0x00000004)
+#define DP_DP_HPD_UNPLUG_INT_MASK		(0x00000008)
+
+#define REG_DP_DP_HPD_REFTIMER			(0x00000018)
+#define REG_DP_DP_HPD_EVENT_TIME_0		(0x0000001C)
+#define REG_DP_DP_HPD_EVENT_TIME_1		(0x00000020)
+
+#define REG_DP_AUX_CTRL				(0x00000030)
+#define DP_AUX_CTRL_ENABLE			(0x00000001)
+#define DP_AUX_CTRL_RESET			(0x00000002)
+
+#define REG_DP_AUX_DATA				(0x00000034)
+#define DP_AUX_DATA_READ			(0x00000001)
+#define DP_AUX_DATA_WRITE			(0x00000000)
+#define DP_AUX_DATA_OFFSET			(0x00000008)
+#define DP_AUX_DATA_INDEX_OFFSET		(0x00000010)
+#define DP_AUX_DATA_MASK			(0x0000ff00)
+#define DP_AUX_DATA_INDEX_WRITE			(0x80000000)
+
+#define REG_DP_AUX_TRANS_CTRL			(0x00000038)
+#define DP_AUX_TRANS_CTRL_I2C			(0x00000100)
+#define DP_AUX_TRANS_CTRL_GO			(0x00000200)
+#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR		(0x00000400)
+#define DP_AUX_TRANS_CTRL_NO_SEND_STOP		(0x00000800)
+
+#define REG_DP_TIMEOUT_COUNT			(0x0000003C)
+#define REG_DP_AUX_LIMITS			(0x00000040)
+#define REG_DP_AUX_STATUS			(0x00000044)
+
+#define DP_DPCD_CP_IRQ				(0x201)
+#define DP_DPCD_RXSTATUS			(0x69493)
+
+#define DP_INTERRUPT_TRANS_NUM			(0x000000A0)
+
+#define REG_DP_MAINLINK_CTRL			(0x00000000)
+#define DP_MAINLINK_CTRL_ENABLE			(0x00000001)
+#define DP_MAINLINK_CTRL_RESET			(0x00000002)
+#define DP_MAINLINK_FB_BOUNDARY_SEL		(0x02000000)
+
+#define REG_DP_STATE_CTRL			(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1	(0x00000001)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2	(0x00000002)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3	(0x00000004)
+#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4	(0x00000008)
+#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE	(0x00000010)
+#define DP_STATE_CTRL_LINK_PRBS7		(0x00000020)
+#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN	(0x00000040)
+#define DP_STATE_CTRL_SEND_VIDEO		(0x00000080)
+#define DP_STATE_CTRL_PUSH_IDLE 		(0x00000100)
+
+#define REG_DP_CONFIGURATION_CTRL		(0x00000008)
+#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK	(0x00000001)
+#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
+#define DP_CONFIGURATION_CTRL_P_INTERLACED	(0x00000004)
+#define DP_CONFIGURATION_CTRL_INTERLACED_BTF	(0x00000008)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES	(0x00000010)
+#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING	(0x00000040)
+#define DP_CONFIGURATION_CTRL_SEND_VSC		(0x00000080)
+#define DP_CONFIGURATION_CTRL_BPC		(0x00000100)
+#define DP_CONFIGURATION_CTRL_ASSR		(0x00000400)
+#define DP_CONFIGURATION_CTRL_RGB_YUV		(0x00000800)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV		(0x00002000)
+#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
+#define DP_CONFIGURATION_CTRL_BPC_SHIFT 	      (0x08)
+#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT	      (0x0D)
+
+#define REG_DP_SOFTWARE_MVID			(0x00000010)
+#define REG_DP_SOFTWARE_NVID			(0x00000018)
+#define REG_DP_TOTAL_HOR_VER			(0x0000001C)
+#define REG_DP_START_HOR_VER_FROM_SYNC		(0x00000020)
+#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY	(0x00000024)
+#define REG_DP_ACTIVE_HOR_VER			(0x00000028)
+
+#define REG_DP_MISC1_MISC0			(0x0000002C)
+#define DP_MISC0_SYNCHRONOUS_CLK		(0x00000001)
+#define DP_MISC0_COLORIMETRY_CFG_SHIFT		(0x00000001)
+#define DP_MISC0_TEST_BITS_DEPTH_SHIFT		(0x00000005)
+
+#define REG_DP_VALID_BOUNDARY			(0x00000030)
+#define REG_DP_VALID_BOUNDARY_2			(0x00000034)
+
+#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING	(0x00000038)
+#define LANE0_MAPPING_SHIFT			(0x00000000)
+#define LANE1_MAPPING_SHIFT			(0x00000002)
+#define LANE2_MAPPING_SHIFT			(0x00000004)
+#define LANE3_MAPPING_SHIFT			(0x00000006)
+
+#define REG_DP_MAINLINK_READY			(0x00000040)
+#define DP_MAINLINK_READY_FOR_VIDEO		(0x00000001)
+#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT	(0x00000003)
+
+#define REG_DP_MAINLINK_LEVELS			(0x00000044)
+#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2	(0x00000002)
+
+
+#define REG_DP_TU				(0x0000004C)
+
+#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET	(0x00000054)
+#define DP_HBR2_ERM_PATTERN			(0x00010000)
+
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0	(0x000000C0)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1	(0x000000C4)
+#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2	(0x000000C8)
+
+#define MMSS_DP_MISC1_MISC0			(0x0000002C)
+#define MMSS_DP_AUDIO_TIMING_GEN		(0x00000080)
+#define MMSS_DP_AUDIO_TIMING_RBR_32		(0x00000084)
+#define MMSS_DP_AUDIO_TIMING_HBR_32		(0x00000088)
+#define MMSS_DP_AUDIO_TIMING_RBR_44		(0x0000008C)
+#define MMSS_DP_AUDIO_TIMING_HBR_44		(0x00000090)
+#define MMSS_DP_AUDIO_TIMING_RBR_48		(0x00000094)
+#define MMSS_DP_AUDIO_TIMING_HBR_48		(0x00000098)
+
+#define MMSS_DP_PSR_CRC_RG			(0x00000154)
+#define MMSS_DP_PSR_CRC_B			(0x00000158)
+
+#define REG_DP_COMPRESSION_MODE_CTRL		(0x00000180)
+
+#define MMSS_DP_AUDIO_CFG			(0x00000200)
+#define MMSS_DP_AUDIO_STATUS			(0x00000204)
+#define MMSS_DP_AUDIO_PKT_CTRL			(0x00000208)
+#define MMSS_DP_AUDIO_PKT_CTRL2			(0x0000020C)
+#define MMSS_DP_AUDIO_ACR_CTRL			(0x00000210)
+#define MMSS_DP_AUDIO_CTRL_RESET		(0x00000214)
+
+#define MMSS_DP_SDP_CFG				(0x00000228)
+#define MMSS_DP_SDP_CFG2			(0x0000022C)
+#define MMSS_DP_AUDIO_TIMESTAMP_0		(0x00000230)
+#define MMSS_DP_AUDIO_TIMESTAMP_1		(0x00000234)
+
+#define MMSS_DP_AUDIO_STREAM_0			(0x00000240)
+#define MMSS_DP_AUDIO_STREAM_1			(0x00000244)
+
+#define MMSS_DP_EXTENSION_0			(0x00000250)
+#define MMSS_DP_EXTENSION_1			(0x00000254)
+#define MMSS_DP_EXTENSION_2			(0x00000258)
+#define MMSS_DP_EXTENSION_3			(0x0000025C)
+#define MMSS_DP_EXTENSION_4			(0x00000260)
+#define MMSS_DP_EXTENSION_5			(0x00000264)
+#define MMSS_DP_EXTENSION_6			(0x00000268)
+#define MMSS_DP_EXTENSION_7			(0x0000026C)
+#define MMSS_DP_EXTENSION_8			(0x00000270)
+#define MMSS_DP_EXTENSION_9			(0x00000274)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_0		(0x00000278)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_1		(0x0000027C)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_2		(0x00000280)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_3		(0x00000284)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_4		(0x00000288)
+#define MMSS_DP_AUDIO_COPYMANAGEMENT_5		(0x0000028C)
+#define MMSS_DP_AUDIO_ISRC_0			(0x00000290)
+#define MMSS_DP_AUDIO_ISRC_1			(0x00000294)
+#define MMSS_DP_AUDIO_ISRC_2			(0x00000298)
+#define MMSS_DP_AUDIO_ISRC_3			(0x0000029C)
+#define MMSS_DP_AUDIO_ISRC_4			(0x000002A0)
+#define MMSS_DP_AUDIO_ISRC_5			(0x000002A4)
+#define MMSS_DP_AUDIO_INFOFRAME_0		(0x000002A8)
+#define MMSS_DP_AUDIO_INFOFRAME_1		(0x000002AC)
+#define MMSS_DP_AUDIO_INFOFRAME_2		(0x000002B0)
+
+#define MMSS_DP_GENERIC0_0			(0x00000300)
+#define MMSS_DP_GENERIC0_1			(0x00000304)
+#define MMSS_DP_GENERIC0_2			(0x00000308)
+#define MMSS_DP_GENERIC0_3			(0x0000030C)
+#define MMSS_DP_GENERIC0_4			(0x00000310)
+#define MMSS_DP_GENERIC0_5			(0x00000314)
+#define MMSS_DP_GENERIC0_6			(0x00000318)
+#define MMSS_DP_GENERIC0_7			(0x0000031C)
+#define MMSS_DP_GENERIC0_8			(0x00000320)
+#define MMSS_DP_GENERIC0_9			(0x00000324)
+#define MMSS_DP_GENERIC1_0			(0x00000328)
+#define MMSS_DP_GENERIC1_1			(0x0000032C)
+#define MMSS_DP_GENERIC1_2			(0x00000330)
+#define MMSS_DP_GENERIC1_3			(0x00000334)
+#define MMSS_DP_GENERIC1_4			(0x00000338)
+#define MMSS_DP_GENERIC1_5			(0x0000033C)
+#define MMSS_DP_GENERIC1_6			(0x00000340)
+#define MMSS_DP_GENERIC1_7			(0x00000344)
+#define MMSS_DP_GENERIC1_8			(0x00000348)
+#define MMSS_DP_GENERIC1_9			(0x0000034C)
+
+#define MMSS_DP_VSCEXT_0			(0x000002D0)
+#define MMSS_DP_VSCEXT_1			(0x000002D4)
+#define MMSS_DP_VSCEXT_2			(0x000002D8)
+#define MMSS_DP_VSCEXT_3			(0x000002DC)
+#define MMSS_DP_VSCEXT_4			(0x000002E0)
+#define MMSS_DP_VSCEXT_5			(0x000002E4)
+#define MMSS_DP_VSCEXT_6			(0x000002E8)
+#define MMSS_DP_VSCEXT_7			(0x000002EC)
+#define MMSS_DP_VSCEXT_8			(0x000002F0)
+#define MMSS_DP_VSCEXT_9			(0x000002F4)
+
+#define MMSS_DP_BIST_ENABLE			(0x00000000)
+#define DP_BIST_ENABLE_DPBIST_EN		(0x00000001)
+
+#define MMSS_DP_TIMING_ENGINE_EN		(0x00000010)
+#define DP_TIMING_ENGINE_EN_EN			(0x00000001)
+
+#define MMSS_DP_INTF_CONFIG			(0x00000014)
+#define MMSS_DP_INTF_HSYNC_CTL			(0x00000018)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F0		(0x0000001C)
+#define MMSS_DP_INTF_VSYNC_PERIOD_F1		(0x00000020)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0	(0x00000024)
+#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1	(0x00000028)
+#define MMSS_INTF_DISPLAY_V_START_F0		(0x0000002C)
+#define MMSS_INTF_DISPLAY_V_START_F1		(0x00000030)
+#define MMSS_DP_INTF_DISPLAY_V_END_F0		(0x00000034)
+#define MMSS_DP_INTF_DISPLAY_V_END_F1		(0x00000038)
+#define MMSS_DP_INTF_ACTIVE_V_START_F0		(0x0000003C)
+#define MMSS_DP_INTF_ACTIVE_V_START_F1		(0x00000040)
+#define MMSS_DP_INTF_ACTIVE_V_END_F0		(0x00000044)
+#define MMSS_DP_INTF_ACTIVE_V_END_F1		(0x00000048)
+#define MMSS_DP_INTF_DISPLAY_HCTL		(0x0000004C)
+#define MMSS_DP_INTF_ACTIVE_HCTL		(0x00000050)
+#define MMSS_DP_INTF_POLARITY_CTL		(0x00000058)
+
+#define MMSS_DP_TPG_MAIN_CONTROL		(0x00000060)
+#define DP_TPG_CHECKERED_RECT_PATTERN		(0x00000100)
+
+#define MMSS_DP_TPG_VIDEO_CONFIG		(0x00000064)
+#define DP_TPG_VIDEO_CONFIG_BPP_8BIT		(0x00000001)
+#define DP_TPG_VIDEO_CONFIG_RGB			(0x00000004)
+
+#define MMSS_DP_ASYNC_FIFO_CONFIG		(0x00000088)
+
+/*DP PHY Register offsets */
+#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
+#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
+#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
+#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
+
+#define REG_DP_PHY_CFG                          (0x00000010)
+
+#define REG_DP_PHY_PD_CTL                       (0x00000018)
+#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
+#define DP_PHY_PD_CTL_PSR_PWRDN			(0x00000002)
+#define DP_PHY_PD_CTL_AUX_PWRDN			(0x00000004)
+#define DP_PHY_PD_CTL_LANE_0_1_PWRDN		(0x00000008)
+#define DP_PHY_PD_CTL_LANE_2_3_PWRDN		(0x00000010)
+#define DP_PHY_PD_CTL_PLL_PWRDN			(0x00000020)
+#define DP_PHY_PD_CTL_DP_CLAMP_EN		(0x00000040)
+
+#define REG_DP_PHY_MODE                         (0x0000001C)
+
+#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
+#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
+#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
+#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
+#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
+#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
+#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
+#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
+#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
+#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
+
+#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
+#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
+#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
+#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
+#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
+#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
+
+
+#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
+#define REG_DP_PHY_AUX_BIST_CFG			(0x00000050)
+
+#define REG_DP_PHY_VCO_DIV			0x0064
+#define REG_DP_PHY_TX0_TX1_LANE_CTL		0x006C
+#define REG_DP_PHY_TX2_TX3_LANE_CTL		0x0088
+
+#define REG_DP_PHY_SPARE0			(0x00AC)
+#define DP_PHY_SPARE0_MASK			(0x000F)
+#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT	(0x0004);
+
+#define REG_DP_PHY_STATUS			(0x00C0)
+
+/* Tx registers */
+#define REG_DP_PHY_TXn_BIST_MODE_LANENO		0x0000
+#define REG_DP_PHY_TXn_CLKBUF_ENABLE		0x0008
+
+#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL		0x000C
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK	0x001F
+#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN	0x0020
+
+#define REG_DP_PHY_TXn_TX_DRV_LVL		0x001C
+#define DP_PHY_TXn_TX_DRV_LVL_MASK		0x001F
+#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN		0x0020
+
+#define REG_DP_PHY_TXn_RESET_TSYNC_EN		0x0024
+#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN	0x0028
+#define REG_DP_PHY_TXn_TX_BAND			0x002C
+#define REG_DP_PHY_TXn_SLEW_CNTL		0x0030
+#define REG_DP_PHY_TXn_INTERFACE_SELECT		0x0034
+
+#define REG_DP_PHY_TXn_RES_CODE_LANE_TX		0x003C
+#define REG_DP_PHY_TXn_RES_CODE_LANE_RX		0x0040
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX	0x0044
+#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX	0x0048
+
+#define REG_DP_PHY_TXn_DEBUG_BUS_SEL		0x0058
+#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN	0x005C
+#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN		0x0060
+#define REG_DP_PHY_TXn_TX_POL_INV		0x0064
+#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
+
+#define REG_DP_PHY_TXn_LANE_MODE_1		0x008C
+
+#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN		0x00C0
+#define REG_DP_PHY_TXn_TX_INTERFACE_MODE	0x00C4
+
+#define REG_DP_PHY_TXn_VMODE_CTRL1		0x00F0
+
+/* PLL register offset */
+#define QSERDES_COM_ATB_SEL1			0x0000
+#define QSERDES_COM_ATB_SEL2			0x0004
+#define QSERDES_COM_FREQ_UPDATE			0x0008
+#define QSERDES_COM_BG_TIMER			0x000C
+#define QSERDES_COM_SSC_EN_CENTER		0x0010
+#define QSERDES_COM_SSC_ADJ_PER1		0x0014
+#define QSERDES_COM_SSC_ADJ_PER2		0x0018
+#define QSERDES_COM_SSC_PER1			0x001C
+#define QSERDES_COM_SSC_PER2			0x0020
+#define QSERDES_COM_SSC_STEP_SIZE1		0x0024
+#define QSERDES_COM_SSC_STEP_SIZE2		0x0028
+#define QSERDES_COM_POST_DIV			0x002C
+#define QSERDES_COM_POST_DIV_MUX		0x0030
+
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		0x0034
+#define QSERDES_COM_BIAS_EN			0x0001
+#define QSERDES_COM_BIAS_EN_MUX			0x0002
+#define QSERDES_COM_CLKBUF_R_EN			0x0004
+#define QSERDES_COM_CLKBUF_L_EN			0x0008
+#define QSERDES_COM_EN_SYSCLK_TX_SEL		0x0010
+#define QSERDES_COM_CLKBUF_RX_DRIVE_L		0x0020
+#define QSERDES_COM_CLKBUF_RX_DRIVE_R		0x0040
+
+#define QSERDES_COM_CLK_ENABLE1			0x0038
+#define QSERDES_COM_SYS_CLK_CTRL		0x003C
+#define QSERDES_COM_SYSCLK_BUF_ENABLE		0x0040
+#define QSERDES_COM_PLL_EN			0x0044
+#define QSERDES_COM_PLL_IVCO			0x0048
+#define QSERDES_COM_CMN_IETRIM			0x004C
+#define QSERDES_COM_CMN_IPTRIM			0x0050
+
+#define QSERDES_COM_CP_CTRL_MODE0		0x0060
+#define QSERDES_COM_CP_CTRL_MODE1		0x0064
+#define QSERDES_COM_PLL_RCTRL_MODE0		0x0068
+#define QSERDES_COM_PLL_RCTRL_MODE1		0x006C
+#define QSERDES_COM_PLL_CCTRL_MODE0		0x0070
+#define QSERDES_COM_PLL_CCTRL_MODE1		0x0074
+#define QSERDES_COM_PLL_CNTRL			0x0078
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM		0x007C
+#define QSERDES_COM_SYSCLK_EN_SEL		0x0080
+#define QSERDES_COM_CML_SYSCLK_SEL		0x0084
+#define QSERDES_COM_RESETSM_CNTRL		0x0088
+#define QSERDES_COM_RESETSM_CNTRL2		0x008C
+#define QSERDES_COM_LOCK_CMP_EN			0x0090
+#define QSERDES_COM_LOCK_CMP_CFG		0x0094
+#define QSERDES_COM_LOCK_CMP1_MODE0		0x0098
+#define QSERDES_COM_LOCK_CMP2_MODE0		0x009C
+#define QSERDES_COM_LOCK_CMP3_MODE0		0x00A0
+
+#define QSERDES_COM_DEC_START_MODE0		0x00B0
+#define QSERDES_COM_DEC_START_MODE1		0x00B4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0	0x00B8
+#define QSERDES_COM_DIV_FRAC_START2_MODE0	0x00BC
+#define QSERDES_COM_DIV_FRAC_START3_MODE0	0x00C0
+#define QSERDES_COM_DIV_FRAC_START1_MODE1	0x00C4
+#define QSERDES_COM_DIV_FRAC_START2_MODE1	0x00C8
+#define QSERDES_COM_DIV_FRAC_START3_MODE1	0x00CC
+#define QSERDES_COM_INTEGLOOP_INITVAL		0x00D0
+#define QSERDES_COM_INTEGLOOP_EN		0x00D4
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	0x00D8
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	0x00DC
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	0x00E0
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	0x00E4
+#define QSERDES_COM_VCOCAL_DEADMAN_CTRL		0x00E8
+#define QSERDES_COM_VCO_TUNE_CTRL		0x00EC
+#define QSERDES_COM_VCO_TUNE_MAP		0x00F0
+
+#define QSERDES_COM_CMN_STATUS			0x0124
+#define QSERDES_COM_RESET_SM_STATUS		0x0128
+
+#define QSERDES_COM_CLK_SEL			0x0138
+#define QSERDES_COM_HSCLK_SEL			0x013C
+
+#define QSERDES_COM_CORECLK_DIV_MODE0		0x0148
+
+#define QSERDES_COM_SW_RESET			0x0150
+#define QSERDES_COM_CORE_CLK_EN			0x0154
+#define QSERDES_COM_C_READY_STATUS		0x0158
+#define QSERDES_COM_CMN_CONFIG			0x015C
+
+#define QSERDES_COM_SVS_MODE_CLK_SEL		0x0164
+
+/* DP MMSS_CC registers */
+#define MMSS_DP_LINK_CMD_RCGR			(0x0138)
+#define MMSS_DP_LINK_CFG_RCGR			(0x013C)
+#define MMSS_DP_PIXEL_M				(0x0174)
+#define MMSS_DP_PIXEL_N				(0x0178)
+
+/* DP HDCP 1.3 registers */
+#define DP_HDCP_CTRL                                   (0x0A0)
+#define DP_HDCP_STATUS                                 (0x0A4)
+#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
+#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
+#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
+#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
+#define DP_HDCP_SHA_STATUS                             (0x0C8)
+#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
+#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
+#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
+#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
+#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
+
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
+#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
+
+/* USB3 DP COM registers */
+#define REG_USB3_DP_COM_RESET_OVRD_CTRL			(0x1C)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET		(0x01)
+#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX	(0x02)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET		(0x04)
+#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX	(0x08)
+
+#define REG_USB3_DP_COM_PHY_MODE_CTRL			(0x00)
+#define USB3_DP_COM_PHY_MODE_DP				(0x02)
+
+#define REG_USB3_DP_COM_SW_RESET			(0x04)
+#define USB3_DP_COM_SW_RESET_SET			(0x01)
+
+#define REG_USB3_DP_COM_TYPEC_CTRL			(0x10)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL			(0x01)
+#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX		(0x02)
+
+#define REG_USB3_DP_COM_SWI_CTRL			(0x0c)
+
+#define REG_USB3_DP_COM_POWER_DOWN_CTRL			(0x08)
+#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN		(0x01)
+
+
+
+#endif /* _DP_REG_H_ */
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index c84f0a8..e5e93e3 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
 	msm_dsi_register();
 	msm_edp_register();
 	msm_hdmi_register();
+	msm_dp_register();
 	adreno_register();
 	return platform_driver_register(&msm_platform_driver);
 }
@@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
 {
 	DBG("fini");
 	platform_driver_unregister(&msm_platform_driver);
+	msm_dp_unregister();
 	msm_hdmi_unregister();
 	adreno_unregister();
 	msm_edp_unregister();
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 71547e7..8b068ec 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -159,6 +159,8 @@ struct msm_drm_private {
 	/* DSI is shared by mdp4 and mdp5 */
 	struct msm_dsi *dsi[2];
 
+	struct msm_dp *dp;
+
 	/* when we have more than one 'msm_gpu' these need to be an array: */
 	struct msm_gpu *gpu;
 	struct msm_file_private *lastctx;
@@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
 }
 #endif
 
+#ifdef CONFIG_DRM_MSM_DP
+int __init msm_dp_register(void);
+void __exit msm_dp_unregister(void);
+int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
+			 struct drm_encoder *encoder);
+int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder);
+int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder);
+void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode);
+
+#else
+static inline int __init msm_dp_register(void)
+{
+	return -EINVAL;
+}
+static inline void __exit msm_dp_unregister(void)
+{
+}
+static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
+				       struct drm_device *dev,
+				       struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
+static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+}
+#endif
+
 void __init msm_mdp_register(void);
 void __exit msm_mdp_unregister(void);
 void __init msm_dpu_register(void);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> Add the needed displayPort files to enable DP driver
> on msm target.
> 
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
> 
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
>
> ...
>
> +int dp_power_init(struct dp_power *dp_power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}

drive-by comment:

this would lead to calling 'pm_runtime_put_sync(&power->pdev->dev)'
below with 'power' being NULL, which doesn't seem a good idea.

It is probably sane to expect that 'dp_power' is not NULL, if that's
the case the check can be removed. Otherwise the function should just
return -EINVAL instead of jumping to 'exit'.

> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_get_sync(&power->pdev->dev);
> +	rc = dp_power_regulator_enable(power);
> +	if (rc) {
> +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> +		goto exit;
> +	}
> +
> +	rc = dp_power_pinctrl_set(power, true);
> +	if (rc) {
> +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> +		goto err_pinctrl;
> +	}
> +
> +	rc = dp_power_config_gpios(power, flip);
> +	if (rc) {
> +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> +		goto err_gpio;
> +	}
> +
> +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> +	if (rc) {
> +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> +		goto err_clk;
> +	}
> +
> +	return 0;
> +
> +err_clk:
> +	dp_power_disable_gpios(power);
> +err_gpio:
> +	dp_power_pinctrl_set(power, false);
> +err_pinctrl:
> +	dp_power_regulator_disable(power);
> +exit:
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return rc;
> +}

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> Add the needed displayPort files to enable DP driver
> on msm target.
> 
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
> 
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
>
> ...
>
> +int dp_power_init(struct dp_power *dp_power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}

drive-by comment:

this would lead to calling 'pm_runtime_put_sync(&power->pdev->dev)'
below with 'power' being NULL, which doesn't seem a good idea.

It is probably sane to expect that 'dp_power' is not NULL, if that's
the case the check can be removed. Otherwise the function should just
return -EINVAL instead of jumping to 'exit'.

> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_get_sync(&power->pdev->dev);
> +	rc = dp_power_regulator_enable(power);
> +	if (rc) {
> +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> +		goto exit;
> +	}
> +
> +	rc = dp_power_pinctrl_set(power, true);
> +	if (rc) {
> +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> +		goto err_pinctrl;
> +	}
> +
> +	rc = dp_power_config_gpios(power, flip);
> +	if (rc) {
> +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> +		goto err_gpio;
> +	}
> +
> +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> +	if (rc) {
> +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> +		goto err_clk;
> +	}
> +
> +	return 0;
> +
> +err_clk:
> +	dp_power_disable_gpios(power);
> +err_gpio:
> +	dp_power_pinctrl_set(power, false);
> +err_pinctrl:
> +	dp_power_regulator_disable(power);
> +exit:
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return rc;
> +}
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

On Thu, Feb 27, 2020 at 01:54:33PM -0800, Matthias Kaehlcke wrote:
> On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> > Add the needed displayPort files to enable DP driver
> > on msm target.
> > 
> > "dp_display" module is the main module that calls into
> > other sub-modules. "dp_drm" file represents the interface
> > between DRM framework and DP driver.
> > 
> > changes in v2:
> > -- Update copyright markings on all relevant files.
> > -- Change pr_err() to DRM_ERROR()
> > -- Use APIs directly instead of function pointers.
> > -- Use drm_display_mode structure to store link parameters in the driver.
> > -- Use macros for register definitions instead of hardcoded values.
> > -- Replace writel_relaxed/readl_relaxed with writel/readl
> >    and remove memory barriers.
> > -- Remove unnecessary NULL checks.
> > -- Use drm helper functions for dpcd read/write.
> > -- Use DRM_DEBUG_DP for debug msgs.
> > 
> > changes in V3:
> > -- Removed changes in dpu_io_util.[ch]
> > -- Added locking around "is_connected" flag and removed atomic_set()
> > -- Removed the argument validation checks in all the static functions
> >    except initialization functions and few API calls across msm/dp files
> > -- Removed hardcoded values for register reads/writes
> > -- Removed vreg related generic structures.
> > -- Added return values where ever necessary.
> > -- Updated dp_ctrl_on function.
> > -- Calling the ctrl specific catalog functions directly instead of
> >    function pointers.
> > -- Added seperate change that adds standard value in drm_dp_helper file.
> > -- Added separate change in this list that is used to initialize
> >    displayport in DPU driver.
> > -- Added change to use drm_dp_get_adjust_request_voltage() function.
> > 
> > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> > ---
> > +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> >
> > ...
> >
> > +int dp_power_init(struct dp_power *dp_power, bool flip)
> > +{
> > +	int rc = 0;
> > +	struct dp_power_private *power;
> > +
> > +	if (!dp_power) {
> > +		DRM_ERROR("invalid power data\n");
> > +		rc = -EINVAL;
> > +		goto exit;
> > +	}
> 
> drive-by comment:
> 
> this would lead to calling 'pm_runtime_put_sync(&power->pdev->dev)'
> below with 'power' being NULL, which doesn't seem a good idea.

correction: with 'power' being uninitialized, which isn't a good idea
either.

> It is probably sane to expect that 'dp_power' is not NULL, if that's
> the case the check can be removed. Otherwise the function should just
> return -EINVAL instead of jumping to 'exit'.
> 
> > +
> > +	power = container_of(dp_power, struct dp_power_private, dp_power);
> > +
> > +	pm_runtime_get_sync(&power->pdev->dev);
> > +	rc = dp_power_regulator_enable(power);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> > +		goto exit;
> > +	}
> > +
> > +	rc = dp_power_pinctrl_set(power, true);
> > +	if (rc) {
> > +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> > +		goto err_pinctrl;
> > +	}
> > +
> > +	rc = dp_power_config_gpios(power, flip);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> > +		goto err_gpio;
> > +	}
> > +
> > +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> > +		goto err_clk;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_clk:
> > +	dp_power_disable_gpios(power);
> > +err_gpio:
> > +	dp_power_pinctrl_set(power, false);
> > +err_pinctrl:
> > +	dp_power_regulator_disable(power);
> > +exit:
> > +	pm_runtime_put_sync(&power->pdev->dev);
> > +	return rc;
> > +}

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

On Thu, Feb 27, 2020 at 01:54:33PM -0800, Matthias Kaehlcke wrote:
> On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> > Add the needed displayPort files to enable DP driver
> > on msm target.
> > 
> > "dp_display" module is the main module that calls into
> > other sub-modules. "dp_drm" file represents the interface
> > between DRM framework and DP driver.
> > 
> > changes in v2:
> > -- Update copyright markings on all relevant files.
> > -- Change pr_err() to DRM_ERROR()
> > -- Use APIs directly instead of function pointers.
> > -- Use drm_display_mode structure to store link parameters in the driver.
> > -- Use macros for register definitions instead of hardcoded values.
> > -- Replace writel_relaxed/readl_relaxed with writel/readl
> >    and remove memory barriers.
> > -- Remove unnecessary NULL checks.
> > -- Use drm helper functions for dpcd read/write.
> > -- Use DRM_DEBUG_DP for debug msgs.
> > 
> > changes in V3:
> > -- Removed changes in dpu_io_util.[ch]
> > -- Added locking around "is_connected" flag and removed atomic_set()
> > -- Removed the argument validation checks in all the static functions
> >    except initialization functions and few API calls across msm/dp files
> > -- Removed hardcoded values for register reads/writes
> > -- Removed vreg related generic structures.
> > -- Added return values where ever necessary.
> > -- Updated dp_ctrl_on function.
> > -- Calling the ctrl specific catalog functions directly instead of
> >    function pointers.
> > -- Added seperate change that adds standard value in drm_dp_helper file.
> > -- Added separate change in this list that is used to initialize
> >    displayport in DPU driver.
> > -- Added change to use drm_dp_get_adjust_request_voltage() function.
> > 
> > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> > ---
> > +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> >
> > ...
> >
> > +int dp_power_init(struct dp_power *dp_power, bool flip)
> > +{
> > +	int rc = 0;
> > +	struct dp_power_private *power;
> > +
> > +	if (!dp_power) {
> > +		DRM_ERROR("invalid power data\n");
> > +		rc = -EINVAL;
> > +		goto exit;
> > +	}
> 
> drive-by comment:
> 
> this would lead to calling 'pm_runtime_put_sync(&power->pdev->dev)'
> below with 'power' being NULL, which doesn't seem a good idea.

correction: with 'power' being uninitialized, which isn't a good idea
either.

> It is probably sane to expect that 'dp_power' is not NULL, if that's
> the case the check can be removed. Otherwise the function should just
> return -EINVAL instead of jumping to 'exit'.
> 
> > +
> > +	power = container_of(dp_power, struct dp_power_private, dp_power);
> > +
> > +	pm_runtime_get_sync(&power->pdev->dev);
> > +	rc = dp_power_regulator_enable(power);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> > +		goto exit;
> > +	}
> > +
> > +	rc = dp_power_pinctrl_set(power, true);
> > +	if (rc) {
> > +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> > +		goto err_pinctrl;
> > +	}
> > +
> > +	rc = dp_power_config_gpios(power, flip);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> > +		goto err_gpio;
> > +	}
> > +
> > +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> > +	if (rc) {
> > +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> > +		goto err_clk;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_clk:
> > +	dp_power_disable_gpios(power);
> > +err_gpio:
> > +	dp_power_pinctrl_set(power, false);
> > +err_pinctrl:
> > +	dp_power_regulator_disable(power);
> > +exit:
> > +	pm_runtime_put_sync(&power->pdev->dev);
> > +	return rc;
> > +}
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

Hi Chandan,

I have no DRM background, but I suspect one reason this patch hasn't
been reviewed in almost 3 months is its size, 8k LOC. I would suggest to
split it up into multiple pieces to make a review less daunting. Not sure
what the exact split would be, evaluating it per source file/self
contained function could be a starting point.

And please make sure to run scripts/checkpatch.pl before sending patches
(especially larger ones), reviewers don't like to spend time pointing out
formatting issues that should have been fixed beforehand:

./scripts/checkpatch.pl DPU-v3-3-5-drm-msm-dp-add-displayPort-driver-support.patch

...

total: 2 errors, 141 warnings, 8440 lines checked

Thanks

Matthias

On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> Add the needed displayPort files to enable DP driver
> on msm target.
> 
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
> 
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/Kconfig                 |    9 +
>  drivers/gpu/drm/msm/Makefile                |   13 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
>  drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
>  drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
>  drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
>  drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590 +++++++++++++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
>  drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
>  drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
>  drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
>  drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
>  drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
>  drivers/gpu/drm/msm/dp/dp_link.c            | 1185 ++++++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
>  drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
>  drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
>  drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
>  drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
>  drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
>  drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
>  drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
>  drivers/gpu/drm/msm/msm_drv.c               |    2 +
>  drivers/gpu/drm/msm/msm_drv.h               |   42 +
>  26 files changed, 8366 insertions(+)
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h
> 
> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> index 6deaa7d..7946cb1 100644
> --- a/drivers/gpu/drm/msm/Kconfig
> +++ b/drivers/gpu/drm/msm/Kconfig
> @@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
>  	help
>  	  Choose this option to enable HDCP state machine
>  
> +config DRM_MSM_DP
> +	bool "Enable DP support in MSM DRM driver"
> +	depends on DRM_MSM
> +	default n
> +	help
> +	  Compile in support for DP driver in msm drm driver. DP external
> +	  display support is enabled through this config option. It can
> +	  be primary or secondary display on device.
> +
>  config DRM_MSM_DSI
>  	bool "Enable DSI support in MSM DRM driver"
>  	depends on DRM_MSM
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 1579cf0..5939f41 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -2,6 +2,7 @@
>  ccflags-y := -I $(srctree)/$(src)
>  ccflags-y += -I $(srctree)/$(src)/disp/dpu1
>  ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
> +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
>  
>  msm-y := \
>  	adreno/adreno_device.o \
> @@ -96,8 +97,20 @@ msm-y := \
>  
>  msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
>  
> +
>  msm-$(CONFIG_DRM_MSM_GPU_STATE)	+= adreno/a6xx_gpu_state.o
>  
> +msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
> +	dp/dp_catalog.o \
> +	dp/dp_ctrl.o \
> +	dp/dp_display.o \
> +	dp/dp_drm.o \
> +	dp/dp_extcon.o \
> +	dp/dp_link.o \
> +	dp/dp_panel.o \
> +	dp/dp_parser.o \
> +	dp/dp_power.o
> +
>  msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
>  msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
>  msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f96e142..29ac7d3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>  
>  	trace_dpu_enc_mode_set(DRMID(drm_enc));
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
> +		msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
> +
>  	list_for_each_entry(conn_iter, connector_list, head)
>  		if (conn_iter->encoder == drm_enc)
>  			conn = conn_iter;
> @@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  {
>  	struct dpu_encoder_virt *dpu_enc = NULL;
>  	int ret = 0;
> +	struct msm_drm_private *priv;
>  	struct drm_display_mode *cur_mode = NULL;
>  
>  	if (!drm_enc) {
> @@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  
>  	mutex_lock(&dpu_enc->enc_lock);
>  	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
> +	priv = drm_enc->dev->dev_private;
>  
>  	trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
>  			     cur_mode->vdisplay);
> @@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  
>  	_dpu_encoder_virt_enable_helper(drm_enc);
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> +		ret = msm_dp_display_enable(priv->dp,
> +						drm_enc);
> +		if (ret) {
> +			DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
> +				ret);
> +			goto out;
> +		}
> +	}
>  	dpu_enc->enabled = true;
>  
>  out:
> @@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
>  	priv = drm_enc->dev->dev_private;
>  	dpu_kms = to_dpu_kms(priv->kms);
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> +		if (msm_dp_display_disable(priv->dp, drm_enc)) {
> +			DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
> +			return;
> +		  }
> +	}
>  	trace_dpu_enc_disable(DRMID(drm_enc));
>  
>  	/* wait for idle */
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> new file mode 100644
> index 0000000..a6bb52a
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -0,0 +1,548 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/delay.h>
> +
> +#include "dp_reg.h"
> +#include "dp_aux.h"
> +
> +#define DP_AUX_ENUM_STR(x)		#x
> +
> +struct dp_aux_private {
> +	struct device *dev;
> +	struct dp_aux dp_aux;
> +	struct dp_catalog *catalog;
> +
> +	struct mutex mutex;
> +	struct completion comp;
> +
> +	u32 aux_error_num;
> +	u32 retry_cnt;
> +	bool cmd_busy;
> +	bool native;
> +	bool read;
> +	bool no_send_addr;
> +	bool no_send_stop;
> +	u32 offset;
> +	u32 segment;
> +	u32 isr;
> +
> +	struct drm_dp_aux drm_aux;
> +};
> +
> +static char *dp_aux_get_error(u32 aux_error)
> +{
> +	switch (aux_error) {
> +	case DP_AUX_ERR_NONE:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
> +	case DP_AUX_ERR_ADDR:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
> +	case DP_AUX_ERR_TOUT:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
> +	case DP_AUX_ERR_NACK:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
> +	case DP_AUX_ERR_DEFER:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
> +	case DP_AUX_ERR_NACK_DEFER:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +static u32 dp_aux_write(struct dp_aux_private *aux,
> +			struct drm_dp_aux_msg *msg)
> +{
> +	u32 data[4], reg, len;
> +	u8 *msgdata = msg->buffer;
> +	int const aux_cmd_fifo_len = 128;
> +	int i = 0;
> +
> +	if (aux->read)
> +		len = 4;
> +	else
> +		len = msg->size + 4;
> +
> +	/*
> +	 * cmd fifo only has depth of 144 bytes
> +	 * limit buf length to 128 bytes here
> +	 */
> +	if (len > aux_cmd_fifo_len) {
> +		DRM_ERROR("buf len error\n");
> +		return 0;
> +	}
> +
> +	/* Pack cmd and write to HW */
> +	data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
> +	if (aux->read)
> +		data[0] |=  BIT(4); /* R/W */
> +
> +	data[1] = (msg->address >> 8) & 0xff;	/* addr[15:8] */
> +	data[2] = msg->address & 0xff;		/* addr[7:0] */
> +	data[3] = (msg->size - 1) & 0xff;	/* len[7:0] */
> +
> +	for (i = 0; i < len; i++) {
> +		reg = (i < 4) ? data[i] : msgdata[i - 4];
> +		/* index = 0, write */
> +		reg = (((reg) << DP_AUX_DATA_OFFSET)
> +		       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
> +		if (i == 0)
> +			reg |= DP_AUX_DATA_INDEX_WRITE;
> +		aux->catalog->aux_data = reg;
> +		dp_catalog_aux_write_data(aux->catalog);
> +	}
> +
> +	dp_catalog_aux_clear_trans(aux->catalog, false);
> +
> +	reg = 0; /* Transaction number == 1 */
> +	if (!aux->native) { /* i2c */
> +		reg |= DP_AUX_TRANS_CTRL_I2C;
> +
> +		if (aux->no_send_addr)
> +			reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
> +
> +		if (aux->no_send_stop)
> +			reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
> +	}
> +
> +	reg |= DP_AUX_TRANS_CTRL_GO;
> +	aux->catalog->aux_data = reg;
> +	dp_catalog_aux_write_trans(aux->catalog);
> +
> +	return len;
> +}
> +
> +static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> +			      struct drm_dp_aux_msg *msg)
> +{
> +	u32 ret = 0, len = 0, timeout;
> +	int const aux_timeout_ms = HZ/4;
> +
> +	reinit_completion(&aux->comp);
> +
> +	len = dp_aux_write(aux, msg);
> +	if (len == 0) {
> +		DRM_ERROR("DP AUX write failed\n");
> +		return -EINVAL;
> +	}
> +
> +	timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
> +	if (!timeout) {
> +		DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
> +		return -ETIMEDOUT;
> +	}
> +
> +	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> +		ret = len;
> +	} else {
> +		DRM_ERROR_RATELIMITED("aux err: %s\n",
> +			dp_aux_get_error(aux->aux_error_num));
> +
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
> +		struct drm_dp_aux_msg *msg)
> +{
> +	u32 data;
> +	u8 *dp;
> +	u32 i, actual_i;
> +	u32 len = msg->size;
> +
> +	dp_catalog_aux_clear_trans(aux->catalog, true);
> +
> +	data = 0;
> +	data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
> +	data |= DP_AUX_DATA_READ;  /* read */
> +
> +	aux->catalog->aux_data = data;
> +	dp_catalog_aux_write_data(aux->catalog);
> +
> +	dp = msg->buffer;
> +
> +	/* discard first byte */
> +	data = dp_catalog_aux_read_data(aux->catalog);
> +
> +	for (i = 0; i < len; i++) {
> +		data = dp_catalog_aux_read_data(aux->catalog);
> +		*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
> +
> +		actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
> +		if (i != actual_i)
> +			pr_warn("Index mismatch: expected %d, found %d\n",
> +				i, actual_i);
> +	}
> +}
> +
> +static void dp_aux_native_handler(struct dp_aux_private *aux)
> +{
> +	u32 isr = aux->isr;
> +
> +	if (isr & DP_INTR_AUX_I2C_DONE)
> +		aux->aux_error_num = DP_AUX_ERR_NONE;
> +	else if (isr & DP_INTR_WRONG_ADDR)
> +		aux->aux_error_num = DP_AUX_ERR_ADDR;
> +	else if (isr & DP_INTR_TIMEOUT)
> +		aux->aux_error_num = DP_AUX_ERR_TOUT;
> +	if (isr & DP_INTR_NACK_DEFER)
> +		aux->aux_error_num = DP_AUX_ERR_NACK;
> +
> +	complete(&aux->comp);
> +}
> +
> +static void dp_aux_i2c_handler(struct dp_aux_private *aux)
> +{
> +	u32 isr = aux->isr;
> +
> +	if (isr & DP_INTR_AUX_I2C_DONE) {
> +		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
> +			aux->aux_error_num = DP_AUX_ERR_NACK;
> +		else
> +			aux->aux_error_num = DP_AUX_ERR_NONE;
> +	} else {
> +		if (isr & DP_INTR_WRONG_ADDR)
> +			aux->aux_error_num = DP_AUX_ERR_ADDR;
> +		else if (isr & DP_INTR_TIMEOUT)
> +			aux->aux_error_num = DP_AUX_ERR_TOUT;
> +		if (isr & DP_INTR_NACK_DEFER)
> +			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
> +		if (isr & DP_INTR_I2C_NACK)
> +			aux->aux_error_num = DP_AUX_ERR_NACK;
> +		if (isr & DP_INTR_I2C_DEFER)
> +			aux->aux_error_num = DP_AUX_ERR_DEFER;
> +	}
> +
> +	complete(&aux->comp);
> +}
> +
> +static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
> +					     struct drm_dp_aux_msg *input_msg)
> +{
> +	u32 const edid_address = 0x50;
> +	u32 const segment_address = 0x30;
> +	bool i2c_read = input_msg->request &
> +		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +	u8 *data = NULL;
> +
> +	if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
> +		(input_msg->address != segment_address)))
> +		return;
> +
> +
> +	data = input_msg->buffer;
> +	if (input_msg->address == segment_address)
> +		aux->segment = *data;
> +	else
> +		aux->offset = *data;
> +}
> +
> +/**
> + * dp_aux_transfer_helper() - helper function for EDID read transactions
> + *
> + * @aux: DP AUX private structure
> + * @input_msg: input message from DRM upstream APIs
> + *
> + * return: void
> + *
> + * This helper function is used to fix EDID reads for non-compliant
> + * sinks that do not handle the i2c middle-of-transaction flag correctly.
> + */
> +static void dp_aux_transfer_helper(struct dp_aux_private *aux,
> +				   struct drm_dp_aux_msg *input_msg)
> +{
> +	struct drm_dp_aux_msg helper_msg;
> +	u32 const message_size = 0x10;
> +	u32 const segment_address = 0x30;
> +	bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
> +	bool i2c_read = input_msg->request &
> +		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +
> +	if (!i2c_mot || !i2c_read || (input_msg->size == 0))
> +		return;
> +
> +	aux->read = false;
> +	aux->cmd_busy = true;
> +	aux->no_send_addr = true;
> +	aux->no_send_stop = true;
> +
> +	/*
> +	 * Send the segment address for every i2c read in which the
> +	 * middle-of-tranaction flag is set. This is required to support EDID
> +	 * reads of more than 2 blocks as the segment address is reset to 0
> +	 * since we are overriding the middle-of-transaction flag for read
> +	 * transactions.
> +	 */
> +	memset(&helper_msg, 0, sizeof(helper_msg));
> +	helper_msg.address = segment_address;
> +	helper_msg.buffer = &aux->segment;
> +	helper_msg.size = 1;
> +	dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +
> +	/*
> +	 * Send the offset address for every i2c read in which the
> +	 * middle-of-transaction flag is set. This will ensure that the sink
> +	 * will update its read pointer and return the correct portion of the
> +	 * EDID buffer in the subsequent i2c read trasntion triggered in the
> +	 * native AUX transfer function.
> +	 */
> +	memset(&helper_msg, 0, sizeof(helper_msg));
> +	helper_msg.address = input_msg->address;
> +	helper_msg.buffer = &aux->offset;
> +	helper_msg.size = 1;
> +	dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +	aux->offset += message_size;
> +
> +	if (aux->offset == 0x80 || aux->offset == 0x100)
> +		aux->segment = 0x0; /* reset segment at end of block */
> +}
> +
> +/*
> + * This function does the real job to process an AUX transaction.
> + * It will call aux_reset() function to reset the AUX channel,
> + * if the waiting is timeout.
> + */
> +static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
> +			       struct drm_dp_aux_msg *msg)
> +{
> +	ssize_t ret;
> +	int const aux_cmd_native_max = 16;
> +	int const aux_cmd_i2c_max = 128;
> +	int const retry_count = 5;
> +	struct dp_aux_private *aux = container_of(drm_aux,
> +		struct dp_aux_private, drm_aux);
> +
> +	mutex_lock(&aux->mutex);
> +
> +	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
> +
> +	/* Ignore address only message */
> +	if ((msg->size == 0) || (msg->buffer == NULL)) {
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +		ret = msg->size;
> +		goto unlock_exit;
> +	}
> +
> +	/* msg sanity check */
> +	if ((aux->native && (msg->size > aux_cmd_native_max)) ||
> +		(msg->size > aux_cmd_i2c_max)) {
> +		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> +			__func__, msg->size, msg->request);
> +		ret = -EINVAL;
> +		goto unlock_exit;
> +	}
> +
> +	dp_aux_update_offset_and_segment(aux, msg);
> +	dp_aux_transfer_helper(aux, msg);
> +
> +	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +	aux->cmd_busy = true;
> +
> +	if (aux->read) {
> +		aux->no_send_addr = true;
> +		aux->no_send_stop = false;
> +	} else {
> +		aux->no_send_addr = true;
> +		aux->no_send_stop = true;
> +	}
> +
> +	ret = dp_aux_cmd_fifo_tx(aux, msg);
> +	if ((ret < 0) && aux->native) {
> +		aux->retry_cnt++;
> +		if (!(aux->retry_cnt % retry_count))
> +			dp_catalog_aux_update_cfg(aux->catalog,
> +				aux->dp_aux.cfg, PHY_AUX_CFG1);
> +		dp_catalog_aux_reset(aux->catalog);
> +		goto unlock_exit;
> +	} else if (ret < 0) {
> +		goto unlock_exit;
> +	}
> +
> +	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> +		if (aux->read)
> +			dp_aux_cmd_fifo_rx(aux, msg);
> +
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +	} else {
> +		/* Reply defer to retry */
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
> +	}
> +
> +	/* Return requested size for success or retry */
> +	ret = msg->size;
> +	aux->retry_cnt = 0;
> +
> +unlock_exit:
> +	aux->cmd_busy = false;
> +	mutex_unlock(&aux->mutex);
> +	return ret;
> +}
> +
> +static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg *aux_cfg)
> +{
> +	int i = 0;
> +
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++)
> +		aux_cfg[i].current_index = 0;
> +}
> +
> +void dp_aux_isr(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	aux->isr = dp_catalog_aux_get_irq(aux->catalog);
> +
> +	if (!aux->cmd_busy)
> +		return;
> +
> +	if (aux->native)
> +		dp_aux_native_handler(aux);
> +	else
> +		dp_aux_i2c_handler(aux);
> +}
> +
> +void dp_aux_reconfig(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_catalog_aux_update_cfg(aux->catalog,
> +			dp_aux->cfg, PHY_AUX_CFG1);
> +	dp_catalog_aux_reset(aux->catalog);
> +}
> +
> +void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux || !aux_cfg) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_aux_reset_phy_config_indices(aux_cfg);
> +	dp_catalog_aux_setup(aux->catalog, aux_cfg);
> +	dp_catalog_aux_reset(aux->catalog);
> +	dp_catalog_aux_enable(aux->catalog, true);
> +	aux->retry_cnt = 0;
> +}
> +
> +void dp_aux_deinit(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_catalog_aux_enable(aux->catalog, false);
> +}
> +
> +int dp_aux_register(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +	int ret = 0;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	aux->drm_aux.name = "dpu_dp_aux";
> +	aux->drm_aux.dev = aux->dev;
> +	aux->drm_aux.transfer = dp_aux_transfer;
> +	ret = drm_dp_aux_register(&aux->drm_aux);
> +	if (ret) {
> +		DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
> +		goto exit;
> +	}
> +	dp_aux->drm_aux = &aux->drm_aux;
> +exit:
> +	return ret;
> +}
> +
> +void dp_aux_unregister(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +	drm_dp_aux_unregister(&aux->drm_aux);
> +}
> +
> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
> +			  struct dp_aux_cfg *aux_cfg)
> +{
> +	int rc = 0;
> +	struct dp_aux_private *aux;
> +	struct dp_aux *dp_aux;
> +
> +	if (!catalog || !aux_cfg) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -ENODEV;
> +		goto error;
> +	}
> +
> +	aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
> +	if (!aux) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	init_completion(&aux->comp);
> +	aux->cmd_busy = false;
> +	mutex_init(&aux->mutex);
> +
> +	aux->dev = dev;
> +	aux->catalog = catalog;
> +	aux->dp_aux.cfg = aux_cfg;
> +	dp_aux = &aux->dp_aux;
> +	aux->retry_cnt = 0;
> +
> +	return dp_aux;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_aux_put(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux)
> +		return;
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	mutex_destroy(&aux->mutex);
> +
> +	devm_kfree(aux->dev, aux);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
> new file mode 100644
> index 0000000..8ce2221
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_AUX_H_
> +#define _DP_AUX_H_
> +
> +#include "dp_catalog.h"
> +#include <drm/drm_dp_helper.h>
> +
> +enum dp_aux_error {
> +	DP_AUX_ERR_NONE	= 0,
> +	DP_AUX_ERR_ADDR	= -1,
> +	DP_AUX_ERR_TOUT	= -2,
> +	DP_AUX_ERR_NACK	= -3,
> +	DP_AUX_ERR_DEFER	= -4,
> +	DP_AUX_ERR_NACK_DEFER	= -5,
> +};
> +
> +struct dp_aux {
> +	struct drm_dp_aux *drm_aux;
> +	struct dp_aux_cfg *cfg;
> +};
> +
> +int dp_aux_register(struct dp_aux *aux);
> +void dp_aux_unregister(struct dp_aux *aux);
> +void dp_aux_isr(struct dp_aux *aux);
> +void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
> +void dp_aux_deinit(struct dp_aux *aux);
> +void dp_aux_reconfig(struct dp_aux *aux);
> +
> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
> +			  struct dp_aux_cfg *aux_cfg);
> +void dp_aux_put(struct dp_aux *aux);
> +
> +#endif /*__DP_AUX_H_*/
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
> new file mode 100644
> index 0000000..51e21bb
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> @@ -0,0 +1,841 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <drm/drm_dp_helper.h>
> +
> +#include "dp_catalog.h"
> +#include "dp_reg.h"
> +
> +#define POLLING_SLEEP_US			1000
> +#define POLLING_TIMEOUT_US			10000
> +
> +#define REFTIMER_DEFAULT_VALUE			0x20000
> +#define SCRAMBLER_RESET_COUNT_VALUE		0xFC
> +
> +#define DP_INTERRUPT_STATUS_ACK_SHIFT	1
> +#define DP_INTERRUPT_STATUS_MASK_SHIFT	2
> +
> +#define DP_INTERRUPT_STATUS1 \
> +	(DP_INTR_AUX_I2C_DONE| \
> +	DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
> +	DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
> +	DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
> +	DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
> +
> +#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_ACK_SHIFT)
> +#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_MASK_SHIFT)
> +
> +#define DP_INTERRUPT_STATUS2 \
> +	(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
> +	DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
> +
> +#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_ACK_SHIFT)
> +#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_MASK_SHIFT)
> +
> +static u8 const vm_pre_emphasis[4][4] = {
> +	{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
> +	{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
> +	{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
> +	{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
> +};
> +
> +/* voltage swing, 0.2v and 1.0v are not support */
> +static u8 const vm_voltage_swing[4][4] = {
> +	{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
> +	{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
> +	{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
> +	{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
> +};
> +
> +struct dp_catalog_private {
> +	struct device *dev;
> +	struct dp_io *io;
> +	struct dp_catalog dp_catalog;
> +};
> +
> +static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_aux.base + offset);
> +}
> +
> +static inline void dp_write_aux(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure aux reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_aux.base + offset);
> +}
> +
> +static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_ahb.base + offset);
> +}
> +
> +static inline void dp_write_ahb(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure phy reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_ahb.base + offset);
> +}
> +
> +static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_cc_io.base + offset);
> +}
> +
> +static inline void dp_write_phy(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure phy reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->phy_io.base + offset);
> +}
> +
> +static inline void dp_write_pll(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
> +}
> +
> +static inline void dp_write_ln_tx0(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
> +}
> +
> +static inline void dp_write_ln_tx1(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
> +}
> +
> +static inline void dp_write_usb_cm(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure usb reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->usb3_dp_com.base + offset);
> +}
> +
> +static inline void dp_write_p0(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure interface reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_p0.base + offset);
> +}
> +
> +static inline u32 dp_read_link(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_link.base + offset);
> +}
> +
> +static inline void dp_write_link(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure link reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_link.base + offset);
> +}
> +
> +/* aux related catalog functions */
> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	return dp_read_aux(catalog, REG_DP_AUX_DATA);
> +}
> +
> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
> +{
> +	int rc = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
> +	return rc;
> +}
> +
> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
> +{
> +	int rc = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
> +	return rc;
> +}
> +
> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read)
> +{
> +	int rc = 0;
> +	u32 data = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (read) {
> +		data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
> +		data &= ~DP_AUX_TRANS_CTRL_GO;
> +		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
> +	} else {
> +		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
> +	}
> +	return rc;
> +}
> +
> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
> +{
> +	u32 aux_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> +
> +	aux_ctrl |= DP_AUX_CTRL_RESET;
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +
> +	aux_ctrl &= ~DP_AUX_CTRL_RESET;
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +}
> +
> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable)
> +{
> +	u32 aux_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> +
> +	if (enable) {
> +		dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
> +		dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
> +		aux_ctrl |= DP_AUX_CTRL_ENABLE;
> +	} else {
> +		aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
> +	}
> +
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +}
> +
> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> +		struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 new_index = 0, current_index = 0;
> +
> +	if (type >= PHY_AUX_CFG_MAX) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	current_index = cfg[type].current_index;
> +	new_index = (current_index + 1) % cfg[type].cfg_cnt;
> +	DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
> +		dp_phy_aux_config_type_to_string(type),
> +	cfg[type].lut[current_index], cfg[type].lut[new_index]);
> +
> +	dp_write_phy(catalog, cfg[type].offset,
> +			cfg[type].lut[new_index]);
> +	cfg[type].current_index = new_index;
> +}
> +
> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> +		struct dp_aux_cfg *cfg)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	int i = 0;
> +
> +	dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
> +		DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> +		DP_PHY_PD_CTL_DP_CLAMP_EN);
> +
> +	/* Turn on BIAS current for PHY/PLL */
> +	dp_write_pll(catalog,
> +		QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
> +		QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
> +		QSERDES_COM_EN_SYSCLK_TX_SEL);
> +
> +	/* DP AUX CFG register programming */
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
> +			dp_phy_aux_config_type_to_string(i),
> +			cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
> +		dp_write_phy(catalog, cfg[i].offset,
> +			cfg[i].lut[cfg[i].current_index]);
> +	}
> +
> +	dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK, PHY_AUX_STOP_ERR_MASK |
> +			PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
> +			PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
> +}
> +
> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 intr, intr_ack;
> +
> +	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
> +	intr &= ~DP_INTERRUPT_STATUS1_MASK;
> +	intr_ack = (intr & DP_INTERRUPT_STATUS1) << DP_INTERRUPT_STATUS_ACK_SHIFT;
> +	dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack | DP_INTERRUPT_STATUS1_MASK);
> +
> +	return intr;
> +
> +}
> +
> +/* controller related catalog functions */
> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
> +				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
> +	dp_write_link(catalog, REG_DP_TU, dp_tu);
> +	dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
> +}
> +
> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, state);
> +}
> +
> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 cfg)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
> +
> +	dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
> +}
> +
> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
> +	u32 ln_mapping;
> +
> +	ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
> +	ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
> +	ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
> +	ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
> +
> +	dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING, ln_mapping);
> +}
> +
> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
> +						bool enable)
> +{
> +	u32 mainlink_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (enable) {
> +		/*
> +		* To make sure link reg writes happens before any other operation,
> +		* dp_write_link() function uses writel() instread of writel_relaxed()
> +		*/
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> +					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> +					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
> +	} else {
> +		mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
> +		mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
> +	}
> +}
> +
> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
> +					u32 colorimetry_cfg, u32 test_bits_depth)
> +{
> +	u32 misc_val;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
> +	misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
> +	misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
> +	/* Configure clock to synchronous mode */
> +	misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
> +
> +	DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
> +	dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
> +}
> +
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
> +					u32 rate, u32 stream_rate_khz,
> +					bool fixed_nvid)
> +{
> +	u32 pixel_m, pixel_n;
> +	u32 mvid, nvid;
> +	u64 mvid_calc;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (fixed_nvid) {
> +		nvid = DP_LINK_CONSTANT_N_VALUE;
> +		DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
> +
> +		/*
> +		 * For intermediate results, use 64 bit arithmetic to avoid
> +		 * loss of precision.
> +		 */
> +		mvid_calc = (u64) stream_rate_khz * nvid;
> +		mvid_calc = div_u64(mvid_calc, rate);
> +
> +		/*
> +		 * truncate back to 32 bits as this final divided value will
> +		 * always be within the range of a 32 bit unsigned int.
> +		 */
> +		mvid = (u32) mvid_calc;
> +		DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
> +			rate, stream_rate_khz);
> +	} else {
> +		pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
> +		pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
> +		DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
> +
> +		mvid = (pixel_m & 0xFFFF) * 5;
> +		nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
> +
> +		DRM_DEBUG_DP("rate = %d\n", rate);
> +
> +		switch (drm_dp_link_rate_to_bw_code(rate)) {
> +		case DP_LINK_BW_5_4:
> +			nvid *= 2;
> +			break;
> +		case DP_LINK_BW_8_1:
> +			nvid *= 3;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
> +	dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
> +	dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
> +}
> +
> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
> +					u32 pattern)
> +{
> +	int bit, ret;
> +	u32 data;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	bit = BIT(pattern - 1);
> +	DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
> +
> +	bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
> +
> +	/* Poll for mainlink ready status */
> +	ret = readx_poll_timeout(readl, catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
> +				 data, data & bit,
> +				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> +	if (ret < 0) {
> +		DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 typec_ctrl;
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
> +			USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
> +			USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
> +						USB3_DP_COM_PHY_MODE_DP);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
> +						USB3_DP_COM_SW_RESET_SET);
> +
> +	/* Default configuration i.e CC1 */
> +	typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
> +	if (flip)
> +		typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
> +						USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
> +
> +}
> +
> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
> +{
> +	u32 sw_reset;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	void __iomem *base;
> +
> +	base = catalog->io->dp_ahb.base;
> +
> +	sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
> +
> +	sw_reset |= DP_SW_RESET;
> +	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +
> +	sw_reset &= ~DP_SW_RESET;
> +	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> +}
> +
> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
> +{
> +	u32 data;
> +	int ret;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	/* Poll for mainlink ready status */
> +	ret = readx_poll_timeout(readl,
> +				 catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
> +				 data, data & DP_MAINLINK_READY_FOR_VIDEO,
> +				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> +	if (ret < 0) {
> +		DRM_ERROR("mainlink not ready\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
> +						bool enable)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	void __iomem *base;
> +
> +	base = catalog->io->dp_ahb.base;
> +
> +	if (enable) {
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS, DP_INTERRUPT_STATUS1_MASK);
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, DP_INTERRUPT_STATUS2_MASK);
> +	} else {
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
> +	}
> +}
> +
> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool en)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (en) {
> +		u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
> +
> +		dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
> +				DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
> +				DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
> +		dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
> +				DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
> +				DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
> +
> +		/* Configure REFTIMER */
> +		reftimer |= REFTIMER_DEFAULT_VALUE;
> +		dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
> +		/* Enable HPD */
> +		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
> +	} else {
> +		/* Disable HPD */
> +		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
> +	}
> +}
> +
> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 intr, intr_ack;
> +
> +	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
> +	intr &= ~DP_INTERRUPT_STATUS2_MASK;
> +	intr_ack = (intr & DP_INTERRUPT_STATUS2) << DP_INTERRUPT_STATUS_ACK_SHIFT;
> +	dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack | DP_INTERRUPT_STATUS2_MASK);
> +
> +	return intr;
> +}
> +
> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_ahb(catalog, REG_DP_PHY_CTRL,
> +			DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +	dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
> +}
> +
> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
> +		bool flipped, u8 ln_cnt)
> +{
> +	u32 info;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u8 orientation = BIT(!!flipped);
> +
> +	info = ln_cnt & DP_PHY_SPARE0_MASK;
> +	info |= (orientation & DP_PHY_SPARE0_MASK) << DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
> +	DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
> +
> +	dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
> +}
> +
> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
> +		u8 v_level, u8 p_level)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u8 voltage_swing_cfg, pre_emphasis_cfg;
> +
> +	DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
> +
> +	voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
> +	pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
> +
> +	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
> +		DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
> +			v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
> +		return -EINVAL;
> +	}
> +
> +	/* Enable MUX to use Cursor values from these registers */
> +	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> +	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> +	/* Configure host and panel only if both values are allowed */
> +	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
> +	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
> +	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
> +	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
> +	DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
> +			voltage_swing_cfg, pre_emphasis_cfg);
> +
> +	return 0;
> +}
> +
> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> +			u32 pattern)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 value = 0x0;
> +
> +	/* Make sure to clear the current pattern before starting a new one */
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
> +
> +	switch (pattern) {
> +	case DP_LINK_QUAL_PATTERN_D10_2:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_PRBS7:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
> +		/* 00111110000011111000001111100000 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0, 0x3E0F83E0);
> +		/* 00001111100000111110000011111000 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1, 0x0F83E0F8);
> +		/* 1111100000111110 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2, 0x0000F83E);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> +	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> +		value &= ~DP_HBR2_ERM_PATTERN;
> +		if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
> +			value = DP_HBR2_ERM_PATTERN;
> +		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
> +		value |= SCRAMBLER_RESET_COUNT_VALUE;
> +		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
> +		dp_write_link(catalog, REG_DP_MAINLINK_LEVELS, DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
> +		return;
> +	default:
> +		DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
> +		return;
> +	}
> +}
> +
> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	return dp_read_link(catalog, REG_DP_MAINLINK_READY);
> +}
> +
> +/* panel related catalog functions */
> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
> +	dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC, dp_catalog->sync_start);
> +	dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY, dp_catalog->width_blanking);
> +	dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
> +	return 0;
> +}
> +
> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> +				struct drm_display_mode *drm_mode)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 hsync_period, vsync_period;
> +	u32 display_v_start, display_v_end;
> +	u32 hsync_start_x, hsync_end_x;
> +	u32 v_sync_width;
> +	u32 hsync_ctl;
> +	u32 display_hctl;
> +
> +	/* TPG config parameters*/
> +	hsync_period = drm_mode->htotal;
> +	vsync_period = drm_mode->vtotal;
> +
> +	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
> +					hsync_period);
> +	display_v_end = ((vsync_period - drm_mode->vsync_start -
> +					drm_mode->vdisplay) * hsync_period) - 1;
> +
> +	display_v_start += drm_mode->htotal - drm_mode->hsync_start;
> +	display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
> +
> +	hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
> +	hsync_end_x = hsync_period - drm_mode->hsync_start -
> +					drm_mode->hdisplay - 1;
> +
> +	v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
> +
> +	hsync_ctl = (hsync_period << 16) |
> +			(drm_mode->hsync_end - drm_mode->hsync_start);
> +	display_hctl = (hsync_end_x << 16) | hsync_start_x;
> +
> +
> +	dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
> +			hsync_period);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width *
> +			hsync_period);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
> +	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
> +	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
> +
> +	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, DP_TPG_CHECKERED_RECT_PATTERN);
> +	dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
> +					DP_TPG_VIDEO_CONFIG_BPP_8BIT |
> +					DP_TPG_VIDEO_CONFIG_RGB);
> +	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
> +	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, DP_TIMING_ENGINE_EN_EN);
> +	DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
> +}
> +
> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
> +	return;
> +}
> +
> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io)
> +{
> +	int rc = 0;
> +	struct dp_catalog *dp_catalog;
> +	struct dp_catalog_private *catalog;
> +
> +	if (!io) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
> +	if (!catalog) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	catalog->dev = dev;
> +	catalog->io = io;
> +
> +	dp_catalog = &catalog->dp_catalog;
> +
> +	return dp_catalog;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_catalog_put(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog;
> +
> +	if (!dp_catalog)
> +		return;
> +
> +	catalog = container_of(dp_catalog, struct dp_catalog_private,
> +				dp_catalog);
> +
> +	devm_kfree(catalog->dev, catalog);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
> new file mode 100644
> index 0000000..51c82dd
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> @@ -0,0 +1,84 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_CATALOG_H_
> +#define _DP_CATALOG_H_
> +
> +#include "dp_parser.h"
> +
> +/* interrupts */
> +#define DP_INTR_HPD		BIT(0)
> +#define DP_INTR_AUX_I2C_DONE	BIT(3)
> +#define DP_INTR_WRONG_ADDR	BIT(6)
> +#define DP_INTR_TIMEOUT		BIT(9)
> +#define DP_INTR_NACK_DEFER	BIT(12)
> +#define DP_INTR_WRONG_DATA_CNT	BIT(15)
> +#define DP_INTR_I2C_NACK	BIT(18)
> +#define DP_INTR_I2C_DEFER	BIT(21)
> +#define DP_INTR_PLL_UNLOCKED	BIT(24)
> +#define DP_INTR_AUX_ERROR	BIT(27)
> +
> +#define DP_INTR_READY_FOR_VIDEO		BIT(0)
> +#define DP_INTR_IDLE_PATTERN_SENT	BIT(3)
> +#define DP_INTR_FRAME_END		BIT(6)
> +#define DP_INTR_CRC_UPDATED		BIT(9)
> +
> +struct dp_catalog {
> +	u32 aux_data;
> +	u32 total;
> +	u32 sync_start;
> +	u32 width_blanking;
> +	u32 dp_active;
> +};
> +
> +/* AUX APIs */
> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read);
> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> +			struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> +			struct dp_aux_cfg *aux_cfg);
> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> +
> +/* DP Controller APIs */
> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 config);
> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32 cc, u32 tb);
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32 rate,
> +				u32 stream_rate_khz, bool fixed_nvid);
> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32 pattern);
> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip);
> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool flipped,
> +				u8 lane_cnt);
> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8 v_level,
> +				u8 p_level);
> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
> +				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> +				u32 pattern);
> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
> +
> +/* DP Panel APIs */
> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> +				struct drm_display_mode *drm_mode);
> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
> +
> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io);
> +void dp_catalog_put(struct dp_catalog *catalog);
> +
> +#endif /* _DP_CATALOG_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> new file mode 100644
> index 0000000..a4575ea
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -0,0 +1,1590 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/types.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <drm/drm_fixed.h>
> +
> +#include "dp_reg.h"
> +#include "dp_ctrl.h"
> +
> +#define DP_KHZ_TO_HZ 1000
> +#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES	(30 * HZ / 1000) /* 30 ms */
> +#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
> +
> +#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
> +#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
> +
> +#define MR_LINK_TRAINING1  0x8
> +#define MR_LINK_SYMBOL_ERM 0x80
> +#define MR_LINK_PRBS7 0x100
> +#define MR_LINK_CUSTOM80 0x200
> +
> +struct dp_tu_calc_input {
> +	u64 lclk;        /* 162, 270, 540 and 810 */
> +	u64 pclk_khz;    /* in KHz */
> +	u64 hactive;     /* active h-width */
> +	u64 hporch;      /* bp + fp + pulse */
> +	int nlanes;      /* no.of.lanes */
> +	int bpp;         /* bits */
> +	int pixel_enc;   /* 444, 420, 422 */
> +	int dsc_en;     /* dsc on/off */
> +	int async_en;   /* async mode */
> +};
> +
> +struct dp_vc_tu_mapping_table {
> +	u8 valid_boundary_link;
> +	u16 delay_start_link;
> +	bool boundary_moderation_en;
> +	u8 valid_lower_boundary_link;
> +	u8 upper_boundary_count;
> +	u8 lower_boundary_count;
> +	u8 tu_size_minus1;
> +};
> +
> +struct dp_ctrl_private {
> +	struct dp_ctrl dp_ctrl;
> +
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_panel *panel;
> +	struct dp_link *link;
> +	struct dp_power *power;
> +	struct dp_parser *parser;
> +	struct dp_catalog *catalog;
> +
> +	struct completion idle_comp;
> +	struct mutex push_idle_mutex;
> +	struct completion video_comp;
> +};
> +
> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	mutex_lock(&ctrl->push_idle_mutex);
> +
> +	reinit_completion(&ctrl->idle_comp);
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
> +
> +	if (!wait_for_completion_timeout(&ctrl->idle_comp,
> +			IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
> +		pr_warn("PUSH_IDLE pattern timedout\n");
> +
> +	mutex_unlock(&ctrl->push_idle_mutex);
> +	pr_debug("mainlink off done\n");
> +}
> +
> +static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
> +{
> +	u32 config = 0, tbd;
> +	u8 *dpcd = ctrl->panel->dpcd;
> +
> +	/* Default-> LSCLK DIV: 1/4 LCLK  */
> +	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
> +
> +	/* Scrambler reset enable */
> +	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
> +		config |= DP_CONFIGURATION_CTRL_ASSR;
> +
> +	tbd = dp_link_get_test_bits_depth(ctrl->link,
> +			ctrl->panel->dp_mode.bpp);
> +
> +	if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
> +		pr_debug("BIT_DEPTH not set. Configure default\n");
> +		tbd = DP_TEST_BIT_DEPTH_8;
> +	}
> +
> +	config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
> +
> +	/* Num of Lanes */
> +	config |= ((ctrl->link->link_params.num_lanes - 1)
> +			<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
> +
> +	if (drm_dp_enhanced_frame_cap(dpcd))
> +		config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
> +
> +	config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
> +
> +	/* sync clock & static Mvid */
> +	config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
> +	config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
> +
> +	dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
> +}
> +
> +/**
> + * dp_ctrl_configure_source_params() - configures DP transmitter source params
> + * @ctrl: Display Port Driver data
> + *
> + * Configures the DP transmitter source params including details such as lane
> + * configuration, output format and sink/panel timing information.
> + */
> +static void dp_ctrl_configure_source_params(struct dp_ctrl_private *ctrl)
> +{
> +	u32 cc, tb;
> +
> +	dp_catalog_ctrl_lane_mapping(ctrl->catalog);
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> +
> +	dp_ctrl_config_ctrl(ctrl);
> +
> +	tb = dp_link_get_test_bits_depth(ctrl->link,
> +		ctrl->panel->dp_mode.bpp);
> +	cc = dp_link_get_colorimetry_config(ctrl->link);
> +	dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
> +	dp_panel_timing_cfg(ctrl->panel);
> +}
> +
> +/*
> + * The structure and few functions present below are IP/Hardware
> + * specific implementation. Most of the implementation will not
> + * have coding comments
> + */
> +struct tu_algo_data {
> +	s64 lclk_fp;
> +	s64 pclk_fp;
> +	s64 lwidth;
> +	s64 hbp_relative_to_pclk;
> +	int nlanes;
> +	int bpp;
> +	int pixelEnc;
> +	int dsc_en;
> +	int async_en;
> +	int bpc;
> +
> +	uint delay_start_link_extra_pixclk;
> +	int extra_buffer_margin;
> +	s64 ratio_fp;
> +	s64 original_ratio_fp;
> +
> +	s64 err_fp;
> +	s64 n_err_fp;
> +	s64 n_n_err_fp;
> +	int tu_size;
> +	int tu_size_desired;
> +	int tu_size_minus1;
> +
> +	int valid_boundary_link;
> +	s64 resulting_valid_fp;
> +	s64 total_valid_fp;
> +	s64 effective_valid_fp;
> +	s64 effective_valid_recorded_fp;
> +	int n_tus;
> +	int n_tus_per_lane;
> +	int paired_tus;
> +	int remainder_tus;
> +	int remainder_tus_upper;
> +	int remainder_tus_lower;
> +	int extra_bytes;
> +	int filler_size;
> +	int delay_start_link;
> +
> +	int extra_pclk_cycles;
> +	int extra_pclk_cycles_in_link_clk;
> +	s64 ratio_by_tu_fp;
> +	s64 average_valid2_fp;
> +	int new_valid_boundary_link;
> +	int remainder_symbols_exist;
> +	int n_symbols;
> +	s64 n_remainder_symbols_per_lane_fp;
> +	s64 last_partial_tu_fp;
> +	s64 TU_ratio_err_fp;
> +
> +	int n_tus_incl_last_incomplete_tu;
> +	int extra_pclk_cycles_tmp;
> +	int extra_pclk_cycles_in_link_clk_tmp;
> +	int extra_required_bytes_new_tmp;
> +	int filler_size_tmp;
> +	int lower_filler_size_tmp;
> +	int delay_start_link_tmp;
> +
> +	bool boundary_moderation_en;
> +	int boundary_mod_lower_err;
> +	int upper_boundary_count;
> +	int lower_boundary_count;
> +	int i_upper_boundary_count;
> +	int i_lower_boundary_count;
> +	int valid_lower_boundary_link;
> +	int even_distribution_BF;
> +	int even_distribution_legacy;
> +	int even_distribution;
> +	int min_hblank_violated;
> +	s64 delay_start_time_fp;
> +	s64 hbp_time_fp;
> +	s64 hactive_time_fp;
> +	s64 diff_abs_fp;
> +
> +	s64 ratio;
> +};
> +
> +static int _tu_param_compare(s64 a, s64 b)
> +{
> +	u32 a_int, a_frac;
> +	u32 b_int, b_frac;
> +
> +	if (a == b)
> +		return 0;
> +
> +	a_int = (a >> 32) & 0x7FFFFFFF;
> +	a_frac = a & 0xFFFFFFFF;
> +
> +	b_int = (b >> 32) & 0x7FFFFFFF;
> +	b_frac = b & 0xFFFFFFFF;
> +
> +	if (a_int > b_int)
> +		return 1;
> +	else if (a_int < b_int)
> +		return 2;
> +	else if (a_frac > b_frac)
> +		return 1;
> +	else
> +		return 2;
> +}
> +
> +static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
> +{
> +	s64 temp1_fp, temp2_fp, temp, temp1, temp2;
> +	int compare_result_1, compare_result_2, compare_result_3;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +
> +	tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> +
> +	temp = (tu->i_upper_boundary_count *
> +				tu->new_valid_boundary_link +
> +				tu->i_lower_boundary_count *
> +				(tu->new_valid_boundary_link-1));
> +	tu->average_valid2_fp = drm_fixp_from_fraction(temp,
> +					(tu->i_upper_boundary_count +
> +					tu->i_lower_boundary_count));
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> +	tu->n_tus = drm_fixp2int(temp2_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu->n_remainder_symbols_per_lane_fp = temp2_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	tu->last_partial_tu_fp =
> +			drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
> +					temp1_fp);
> +
> +	if (tu->n_remainder_symbols_per_lane_fp != 0)
> +		tu->remainder_symbols_exist = 1;
> +	else
> +		tu->remainder_symbols_exist = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
> +	tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
> +
> +	tu->paired_tus = (int)((tu->n_tus_per_lane) /
> +					(tu->i_upper_boundary_count +
> +					 tu->i_lower_boundary_count));
> +
> +	tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
> +						(tu->i_upper_boundary_count +
> +						tu->i_lower_boundary_count);
> +
> +	if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
> +		tu->remainder_tus_upper = tu->i_upper_boundary_count;
> +		tu->remainder_tus_lower = tu->remainder_tus -
> +						tu->i_upper_boundary_count;
> +	} else {
> +		tu->remainder_tus_upper = tu->remainder_tus;
> +		tu->remainder_tus_lower = 0;
> +	}
> +
> +	temp = tu->paired_tus * (tu->i_upper_boundary_count *
> +				tu->new_valid_boundary_link +
> +				tu->i_lower_boundary_count *
> +				(tu->new_valid_boundary_link - 1)) +
> +				(tu->remainder_tus_upper *
> +				 tu->new_valid_boundary_link) +
> +				(tu->remainder_tus_lower *
> +				(tu->new_valid_boundary_link - 1));
> +	tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
> +
> +	if (tu->remainder_symbols_exist) {
> +		temp1_fp = tu->total_valid_fp +
> +				tu->n_remainder_symbols_per_lane_fp;
> +		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> +		temp2_fp = temp2_fp + tu->last_partial_tu_fp;
> +		temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
> +	} else {
> +		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> +		temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
> +	}
> +	tu->effective_valid_fp = temp1_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +	tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +	tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
> +
> +	tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> +
> +	if (temp2_fp)
> +		tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		tu->n_tus_incl_last_incomplete_tu = 0;
> +
> +	temp1 = 0;
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> +	temp1_fp = tu->average_valid2_fp - temp2_fp;
> +	temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	if (temp1_fp)
> +		temp1 = drm_fixp2int_ceil(temp1_fp);
> +
> +	temp = tu->i_upper_boundary_count * tu->nlanes;
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(temp, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	if (temp2_fp)
> +		temp2 = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		temp2 = 0;
> +	tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
> +
> +	temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
> +	temp2_fp = drm_fixp_from_fraction(
> +	tu->extra_required_bytes_new_tmp, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	if (temp1_fp)
> +		tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu->extra_pclk_cycles_tmp = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
> +	temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
> +	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	if (temp1_fp)
> +		tu->extra_pclk_cycles_in_link_clk_tmp =
> +						drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu->extra_pclk_cycles_in_link_clk_tmp = 0;
> +
> +	tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
> +
> +	tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
> +
> +	tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
> +					tu->lower_filler_size_tmp +
> +					tu->extra_buffer_margin;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
> +	tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
> +
> +	compare_result_1 = _tu_param_compare(tu->n_n_err_fp, tu->diff_abs_fp);
> +	if (compare_result_1 == 2)
> +		compare_result_1 = 1;
> +	else
> +		compare_result_1 = 0;
> +
> +	compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
> +	if (compare_result_2 == 2)
> +		compare_result_2 = 1;
> +	else
> +		compare_result_2 = 0;
> +
> +	compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
> +					tu->delay_start_time_fp);
> +	if (compare_result_3 == 2)
> +		compare_result_3 = 0;
> +	else
> +		compare_result_3 = 1;
> +
> +	if (((tu->even_distribution == 1) ||
> +			((tu->even_distribution_BF == 0) &&
> +			(tu->even_distribution_legacy == 0))) &&
> +			tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
> +			compare_result_2 &&
> +			(compare_result_1 || (tu->min_hblank_violated == 1)) &&
> +			(tu->new_valid_boundary_link - 1) > 0 &&
> +			compare_result_3 &&
> +			(tu->delay_start_link_tmp <= 1023)) {
> +		tu->upper_boundary_count = tu->i_upper_boundary_count;
> +		tu->lower_boundary_count = tu->i_lower_boundary_count;
> +		tu->err_fp = tu->n_n_err_fp;
> +		tu->boundary_moderation_en = true;
> +		tu->tu_size_desired = tu->tu_size;
> +		tu->valid_boundary_link = tu->new_valid_boundary_link;
> +		tu->effective_valid_recorded_fp = tu->effective_valid_fp;
> +		tu->even_distribution_BF = 1;
> +		tu->delay_start_link = tu->delay_start_link_tmp;
> +	} else if (tu->boundary_mod_lower_err == 0) {
> +		compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
> +							tu->diff_abs_fp);
> +		if (compare_result_1 == 2)
> +			tu->boundary_mod_lower_err = 1;
> +	}
> +}
> +
> +static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
> +				   struct dp_vc_tu_mapping_table *tu_table)
> +{
> +	struct tu_algo_data tu;
> +	int compare_result_1, compare_result_2;
> +	u64 temp = 0;
> +	s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
> +
> +	s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006 */
> +	s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
> +	s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
> +	s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
> +
> +	u8 DP_BRUTE_FORCE = 1;
> +	s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1 */
> +	uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
> +	uint HBLANK_MARGIN = 4;
> +
> +	memset(&tu, 0, sizeof(tu));
> +
> +	tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
> +	tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
> +	tu.lwidth               = in->hactive;
> +	tu.hbp_relative_to_pclk = in->hporch;
> +	tu.nlanes               = in->nlanes;
> +	tu.bpp                  = in->bpp;
> +	tu.pixelEnc             = in->pixel_enc;
> +	tu.dsc_en               = in->dsc_en;
> +	tu.async_en             = in->async_en;
> +
> +	tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
> +
> +	if (tu.pixelEnc == 420) {
> +		temp_fp = drm_fixp_from_fraction(2, 1);
> +		tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
> +		tu.lwidth /= 2;
> +		tu.hbp_relative_to_pclk /= 2;
> +	}
> +
> +	if (tu.pixelEnc == 422) {
> +		switch (tu.bpp) {
> +		case 24:
> +			tu.bpp = 16;
> +			tu.bpc = 8;
> +			break;
> +		case 30:
> +			tu.bpp = 20;
> +			tu.bpc = 10;
> +			break;
> +		default:
> +			tu.bpp = 16;
> +			tu.bpc = 8;
> +			break;
> +		}
> +	} else {
> +		tu.bpc = tu.bpp/3;
> +	}
> +
> +	temp1_fp = drm_fixp_from_fraction(4, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
> +	temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
> +	tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
> +
> +	tu.original_ratio_fp = tu.ratio_fp;
> +	tu.boundary_moderation_en = false;
> +	tu.upper_boundary_count = 0;
> +	tu.lower_boundary_count = 0;
> +	tu.i_upper_boundary_count = 0;
> +	tu.i_lower_boundary_count = 0;
> +	tu.valid_lower_boundary_link = 0;
> +	tu.even_distribution_BF = 0;
> +	tu.even_distribution_legacy = 0;
> +	tu.even_distribution = 0;
> +	tu.delay_start_time_fp = 0;
> +
> +	tu.err_fp = drm_fixp_from_fraction(1000, 1);
> +	tu.n_err_fp = 0;
> +	tu.n_n_err_fp = 0;
> +
> +	tu.ratio = drm_fixp2int(tu.ratio_fp);
> +	if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
> +			!tu.ratio && tu.dsc_en == 0) {
> +		tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
> +		tu.ratio = drm_fixp2int(tu.ratio_fp);
> +		if (tu.ratio)
> +			tu.ratio_fp = drm_fixp_from_fraction(1, 1);
> +	}
> +
> +	if (tu.ratio > 1)
> +		tu.ratio = 1;
> +
> +	if (tu.ratio == 1)
> +		goto tu_size_calc;
> +
> +	compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
> +	if (!compare_result_1 || compare_result_1 == 1)
> +		compare_result_1 = 1;
> +	else
> +		compare_result_1 = 0;
> +
> +	compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
> +	if (!compare_result_2 || compare_result_2 == 2)
> +		compare_result_2 = 1;
> +	else
> +		compare_result_2 = 0;
> +
> +	if (tu.dsc_en && compare_result_1 && compare_result_2) {
> +		HBLANK_MARGIN += 4;
> +		DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
> +	}
> +
> +tu_size_calc:
> +	for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> +		temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
> +		temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +		temp = drm_fixp2int_ceil(temp2_fp);
> +		temp1_fp = drm_fixp_from_fraction(temp, 1);
> +		tu.n_err_fp = temp1_fp - temp2_fp;
> +
> +		if (tu.n_err_fp < tu.err_fp) {
> +			tu.err_fp = tu.n_err_fp;
> +			tu.tu_size_desired = tu.tu_size;
> +		}
> +	}
> +
> +	tu.tu_size_minus1 = tu.tu_size_desired - 1;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +	tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu.n_tus = drm_fixp2int(temp2_fp);
> +
> +	tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
> +	DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
> +		tu.valid_boundary_link, tu.n_tus);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	temp = drm_fixp2int(temp2_fp);
> +	if (temp && temp2_fp)
> +		tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		tu.extra_bytes = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
> +	temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
> +	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	temp = drm_fixp2int(temp1_fp);
> +	if (temp && temp1_fp)
> +		tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu.extra_pclk_cycles = 0;
> +
> +	temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> +	temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	temp = drm_fixp2int(temp1_fp);
> +	if (temp && temp1_fp)
> +		tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu.extra_pclk_cycles_in_link_clk = 0;
> +
> +	tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +
> +	tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
> +				tu.filler_size + tu.extra_buffer_margin;
> +
> +	tu.resulting_valid_fp =
> +			drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> +	tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(
> +			(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
> +	tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> +	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> +
> +	compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
> +					tu.delay_start_time_fp);
> +	if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp) */
> +		tu.min_hblank_violated = 1;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> +
> +	compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
> +						tu.delay_start_time_fp);
> +	if (compare_result_2 == 2)
> +		tu.min_hblank_violated = 1;
> +
> +	tu.delay_start_time_fp = 0;
> +
> +	/* brute force */
> +
> +	tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
> +	tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
> +
> +	temp = drm_fixp2int(tu.diff_abs_fp);
> +	if (!temp && tu.diff_abs_fp <= 0xffff)
> +		tu.diff_abs_fp = 0;
> +
> +	/* if(diff_abs < 0) diff_abs *= -1 */
> +	if (tu.diff_abs_fp < 0)
> +		tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
> +
> +	tu.boundary_mod_lower_err = 0;
> +	if ((tu.diff_abs_fp != 0 &&
> +			((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
> +			 (tu.even_distribution_legacy == 0) ||
> +			 (DP_BRUTE_FORCE == 1))) ||
> +			(tu.min_hblank_violated == 1)) {
> +		do {
> +			tu.err_fp = drm_fixp_from_fraction(1000, 1);
> +
> +			temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> +			temp2_fp = drm_fixp_from_fraction(
> +					tu.delay_start_link_extra_pixclk, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +			if (temp1_fp)
> +				tu.extra_buffer_margin =
> +					drm_fixp2int_ceil(temp1_fp);
> +			else
> +				tu.extra_buffer_margin = 0;
> +
> +			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +			if (temp1_fp)
> +				tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
> +			else
> +				tu.n_symbols = 0;
> +
> +			for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> +				for (tu.i_upper_boundary_count = 1;
> +					tu.i_upper_boundary_count <= 15;
> +					tu.i_upper_boundary_count++) {
> +					for (tu.i_lower_boundary_count = 1;
> +						tu.i_lower_boundary_count <= 15;
> +						tu.i_lower_boundary_count++) {
> +						_tu_valid_boundary_calc(&tu);
> +					}
> +				}
> +			}
> +			tu.delay_start_link_extra_pixclk--;
> +		} while (tu.boundary_moderation_en != true &&
> +			tu.boundary_mod_lower_err == 1 &&
> +			tu.delay_start_link_extra_pixclk != 0);
> +
> +		if (tu.boundary_moderation_en == true) {
> +			temp1_fp = drm_fixp_from_fraction(
> +					(tu.upper_boundary_count *
> +					tu.valid_boundary_link +
> +					tu.lower_boundary_count *
> +					(tu.valid_boundary_link - 1)), 1);
> +			temp2_fp = drm_fixp_from_fraction(
> +					(tu.upper_boundary_count +
> +					tu.lower_boundary_count), 1);
> +			tu.resulting_valid_fp =
> +					drm_fixp_div(temp1_fp, temp2_fp);
> +
> +			temp1_fp = drm_fixp_from_fraction(
> +					tu.tu_size_desired, 1);
> +			tu.ratio_by_tu_fp =
> +				drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +
> +			tu.valid_lower_boundary_link =
> +				tu.valid_boundary_link - 1;
> +
> +			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +			temp2_fp = drm_fixp_div(temp1_fp,
> +						tu.resulting_valid_fp);
> +			tu.n_tus = drm_fixp2int(temp2_fp);
> +
> +			tu.tu_size_minus1 = tu.tu_size_desired - 1;
> +			tu.even_distribution_BF = 1;
> +
> +			temp1_fp =
> +				drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +			temp2_fp =
> +				drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> +			tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> +		}
> +	}
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
> +
> +	if (temp2_fp)
> +		temp = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		temp = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> +	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
> +	temp1_fp = drm_fixp_from_fraction(temp, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +	temp = drm_fixp2int(temp2_fp);
> +
> +	if (tu.async_en)
> +		tu.delay_start_link += (int)temp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> +	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> +
> +	/* OUTPUTS */
> +	tu_table->valid_boundary_link       = tu.valid_boundary_link;
> +	tu_table->delay_start_link          = tu.delay_start_link;
> +	tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
> +	tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
> +	tu_table->upper_boundary_count      = tu.upper_boundary_count;
> +	tu_table->lower_boundary_count      = tu.lower_boundary_count;
> +	tu_table->tu_size_minus1            = tu.tu_size_minus1;
> +
> +	DRM_DEBUG_DP("TU: valid_boundary_link: %d\n", tu_table->valid_boundary_link);
> +	DRM_DEBUG_DP("TU: delay_start_link: %d\n", tu_table->delay_start_link);
> +	DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
> +			tu_table->boundary_moderation_en);
> +	DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
> +			tu_table->valid_lower_boundary_link);
> +	DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
> +			tu_table->upper_boundary_count);
> +	DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
> +			tu_table->lower_boundary_count);
> +	DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
> +}
> +
> +static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
> +		struct dp_vc_tu_mapping_table *tu_table)
> +{
> +	struct dp_tu_calc_input in;
> +	struct drm_display_mode *drm_mode;
> +
> +	drm_mode = &ctrl->panel->dp_mode.drm_mode;
> +
> +	in.lclk = ctrl->link->link_params.rate / 1000;
> +	in.pclk_khz = drm_mode->clock;
> +	in.hactive = drm_mode->hdisplay;
> +	in.hporch = drm_mode->htotal - drm_mode->hdisplay;
> +	in.nlanes = ctrl->link->link_params.num_lanes;
> +	in.bpp = ctrl->panel->dp_mode.bpp;
> +	in.pixel_enc = 444;
> +	in.dsc_en = 0;
> +	in.async_en = 0;
> +
> +	_dp_ctrl_calc_tu(&in, tu_table);
> +}
> +
> +static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
> +{
> +	u32 dp_tu = 0x0;
> +	u32 valid_boundary = 0x0;
> +	u32 valid_boundary2 = 0x0;
> +	struct dp_vc_tu_mapping_table tu_calc_table;
> +
> +	dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
> +
> +	dp_tu |= tu_calc_table.tu_size_minus1;
> +	valid_boundary |= tu_calc_table.valid_boundary_link;
> +	valid_boundary |= (tu_calc_table.delay_start_link << 16);
> +
> +	valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
> +	valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
> +	valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
> +
> +	if (tu_calc_table.boundary_moderation_en)
> +		valid_boundary2 |= BIT(0);
> +
> +	pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
> +			dp_tu, valid_boundary, valid_boundary2);
> +
> +	dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
> +				dp_tu, valid_boundary, valid_boundary2);
> +}
> +
> +static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	if (!wait_for_completion_timeout(&ctrl->video_comp,
> +				WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
> +		DRM_ERROR("Link Train timedout\n");
> +		ret = -ETIMEDOUT;
> +	}
> +	return ret;
> +}
> +
> +static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
> +{
> +	struct dp_link *link = ctrl->link;
> +	int ret = 0, lane, lane_cnt;
> +	u8 buf[4];
> +	u32 max_level_reached = 0;
> +	u32 voltage_swing_level = link->phy_params.v_level;
> +	u32 pre_emphasis_level = link->phy_params.p_level;
> +
> +	ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> +		voltage_swing_level, pre_emphasis_level);
> +	if (ret)
> +		return ret;
> +
> +	if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +		DRM_DEBUG_DP("max. voltage swing level reached %d\n",
> +				voltage_swing_level);
> +		max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
> +	}
> +
> +	if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
> +		DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
> +				pre_emphasis_level);
> +		max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
> +	}
> +
> +	pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
> +
> +	lane_cnt = ctrl->link->link_params.num_lanes;
> +	for (lane = 0; lane < lane_cnt; lane++)
> +		buf[lane] = voltage_swing_level | pre_emphasis_level | max_level_reached;
> +
> +	DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level | pre_emphasis_level);
> +	ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET, buf, lane_cnt);
> +	if (ret == lane_cnt)
> +		ret = 0;
> +
> +	return ret;
> +}
> +
> +static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
> +		u8 pattern)
> +{
> +	u8 buf;
> +	int ret = 0;
> +
> +	DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
> +
> +	buf = pattern;
> +	ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET, buf);
> +	return ret == 1;
> +}
> +
> +static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
> +				    u8 *link_status)
> +{
> +	int len = 0;
> +	u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
> +	u32 link_status_read_max_retries = 100;
> +
> +	while (--link_status_read_max_retries) {
> +		len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
> +			link_status);
> +		if (len != DP_LINK_STATUS_SIZE) {
> +			DRM_ERROR("DP link status read failed, err: %d\n", len);
> +			return len;
> +		}
> +
> +		if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
> +			return 0;
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
> +{
> +	int tries, old_v_level, ret = 0;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +	int const maximum_retries = 5;
> +
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, DP_TRAINING_PATTERN_1);
> +	if (ret)
> +		return ret;
> +	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
> +		DP_LINK_SCRAMBLING_DISABLE);
> +	ret = dp_ctrl_update_vx_px(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	tries = 0;
> +	old_v_level = ctrl->link->phy_params.v_level;
> +	for (tries = 0; tries < maximum_retries; tries++) {
> +		drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
> +
> +		ret = dp_ctrl_read_link_status(ctrl, link_status);
> +		if (ret)
> +			return ret;
> +
> +		if (drm_dp_clock_recovery_ok(link_status,
> +			ctrl->link->link_params.num_lanes)) {
> +			return ret;
> +		}
> +
> +		if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +			DRM_ERROR_RATELIMITED("max v_level reached\n");
> +			return -EAGAIN;
> +		}
> +
> +		if (old_v_level != ctrl->link->phy_params.v_level) {
> +			tries = 0;
> +			old_v_level = ctrl->link->phy_params.v_level;
> +		}
> +
> +		DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
> +
> +		dp_link_adjust_levels(ctrl->link, link_status);
> +		ret = dp_ctrl_update_vx_px(ctrl);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	DRM_ERROR("max tries reached\n");
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	switch (ctrl->link->link_params.rate) {
> +	case 810000:
> +		ctrl->link->link_params.rate = 540000;
> +		break;
> +	case 540000:
> +		ctrl->link->link_params.rate = 270000;
> +		break;
> +	case 270000:
> +	case 162000:
> +	default:
> +		ctrl->link->link_params.rate = 162000;
> +		break;
> +	};
> +
> +	DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
> +
> +	return ret;
> +}
> +
> +static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
> +{
> +	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
> +	drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> +}
> +
> +static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
> +{
> +	int tries = 0, ret = 0;
> +	char pattern;
> +	int const maximum_retries = 5;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	if (drm_dp_tps3_supported(ctrl->panel->dpcd))
> +		pattern = DP_TRAINING_PATTERN_3;
> +	else
> +		pattern = DP_TRAINING_PATTERN_2;
> +
> +	ret = dp_ctrl_update_vx_px(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
> +	if (ret)
> +		return ret;
> +
> +	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
> +
> +	for (tries = 0; tries <= maximum_retries; tries++) {
> +		drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> +
> +		ret = dp_ctrl_read_link_status(ctrl, link_status);
> +		if (ret)
> +			return ret;
> +
> +		if (drm_dp_channel_eq_ok(link_status,
> +			ctrl->link->link_params.num_lanes))
> +			return ret;
> +
> +		dp_link_adjust_levels(ctrl->link, link_status);
> +		ret = dp_ctrl_update_vx_px(ctrl);
> +		if (ret)
> +			return ret;
> +
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +	u8 encoding = DP_SET_ANSI_8B10B;
> +	struct drm_dp_link link_info = {0};
> +
> +	ctrl->link->phy_params.p_level = 0;
> +	ctrl->link->phy_params.v_level = 0;
> +
> +	dp_ctrl_config_ctrl(ctrl);
> +
> +	ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
> +		dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +		return ret;
> +	}
> +
> +	drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
> +	drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
> +				&encoding, 1);
> +
> +	ret = dp_ctrl_link_train_1(ctrl);
> +	if (ret) {
> +		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
> +		goto end;
> +	}
> +
> +	/* print success info as this is a result of user initiated action */
> +	DRM_DEBUG_DP("link training #1 successful\n");
> +
> +	ret = dp_ctrl_link_training_2(ctrl);
> +	if (ret) {
> +		DRM_ERROR("link training #2 failed. ret=%d\n", ret);
> +		goto end;
> +	}
> +
> +	/* print success info as this is a result of user initiated action */
> +	DRM_DEBUG_DP("link training #2 successful\n");
> +
> +end:
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	dp_ctrl_clear_training_pattern(ctrl);
> +	return ret;
> +}
> +
> +static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool train)
> +{
> +	bool mainlink_ready = false;
> +	int ret = 0;
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> +
> +	ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
> +	if (ret)
> +		return ret;
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> +		return ret;
> +
> +	if (train) {
> +		/*
> +		 * As part of previous calls, DP controller state might have
> +		 * transitioned to PUSH_IDLE. In order to start transmitting a link
> +		 * training pattern, we have to first do a DP software reset.
> +		 */
> +		dp_catalog_ctrl_reset(ctrl->catalog);
> +
> +		ret = dp_ctrl_link_train(ctrl);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/*
> +	 * Set up transfer unit values and set controller state to send
> +	 * video.
> +	 */
> +	dp_ctrl_setup_tr_unit(ctrl);
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
> +
> +	ret = dp_ctrl_wait4video_ready(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
> +	DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT READY");
> +	return ret;
> +}
> +
> +static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
> +				   char *name, u32 rate)
> +{
> +	u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
> +	struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
> +
> +	while (num && strcmp(cfg->clk_name, name)) {
> +		num--;
> +		cfg++;
> +	}
> +
> +	DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
> +
> +	if (num)
> +		cfg->rate = rate;
> +	else
> +		DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
> +}
> +
> +static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	dp_power_set_link_clk_parent(ctrl->power);
> +	dp_power_set_pixel_clk_parent(ctrl->power);
> +
> +	dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk", ctrl->link->link_params.rate);
> +
> +	dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk", ctrl->dp_ctrl.pixel_rate);
> +
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
> +	if (ret)
> +		DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
> +
> +	return ret;
> +}
> +
> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("Invalid input data\n");
> +		return -EINVAL;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	ctrl->dp_ctrl.orientation = flip;
> +
> +	dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
> +	dp_catalog_ctrl_phy_reset(ctrl->catalog);
> +	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_ctrl_host_deinit() - Uninitialize DP controller
> + * @ctrl: Display Port Driver data
> + *
> + * Perform required steps to uninitialize DP controller
> + * and its resources.
> + */
> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("Invalid input data\n");
> +		return;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
> +
> +	DRM_DEBUG_DP("Host deinitialized successfully\n");
> +}
> +
> +static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
> +{
> +	u8 *dpcd = ctrl->panel->dpcd;
> +
> +	/*
> +	 * For better interop experience, used a fixed NVID=0x8000
> +	 * whenever connected to a VGA dongle downstream.
> +	 */
> +	if (drm_dp_is_branch(dpcd))
> +		return (drm_dp_has_quirk(&ctrl->panel->desc,
> +				DP_DPCD_QUIRK_CONSTANT_N));
> +
> +	return false;
> +}
> +
> +static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> +	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> +		ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> +	/*
> +	 * Disable and re-enable the mainlink clock since the
> +	 * link clock might have been adjusted as part of the
> +	 * link maintenance.
> +	 */
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> +	if (ret) {
> +		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> +		return ret;
> +	}
> +	/* hw recommended delay before re-enabling clocks */
> +	msleep(20);
> +
> +	ret = dp_ctrl_enable_mainlink_clocks(ctrl);
> +	if (ret) {
> +		DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	dp_ctrl_configure_source_params(ctrl);
> +	dp_catalog_ctrl_config_msa(ctrl->catalog,
> +		ctrl->link->link_params.rate,
> +		ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
> +	reinit_completion(&ctrl->idle_comp);
> +
> +	return ret;
> +}
> +
> +static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +	int tries, max_tries = 10;
> +
> +	dp_ctrl_push_idle(&ctrl->dp_ctrl);
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +
> +	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> +
> +	for (tries = 0; tries < max_tries; tries++) {
> +		ret = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (ret) {
> +			DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
> +			break;
> +		}
> +
> +		ret = dp_ctrl_setup_main_link(ctrl, true);
> +		if (ret == -EAGAIN) /* try with lower link rate */
> +			dp_ctrl_link_rate_down_shift(ctrl);
> +	}
> +	return ret;
> +}
> +
> +static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	if (!ctrl->link->phy_params.phy_test_pattern_sel) {
> +		DRM_DEBUG_DP("no test pattern selected by sink\n");
> +		return ret;
> +	}
> +
> +	dp_ctrl_push_idle(&ctrl->dp_ctrl);
> +	/*
> +	 * The global reset will need DP link related clocks to be
> +	 * running. Add the global reset just before disabling the
> +	 * link clocks and core clocks.
> +	 */
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +	ret = dp_ctrl_off(&ctrl->dp_ctrl);
> +	if (ret) {
> +		DRM_ERROR("failed to disable DP controller\n");
> +		return ret;
> +	}
> +
> +	ret = dp_ctrl_on(&ctrl->dp_ctrl);
> +	if (ret)
> +		DRM_ERROR("failed to enable DP controller\n");
> +
> +	return ret;
> +}
> +
> +static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private *ctrl)
> +{
> +	bool success = false;
> +	u32 pattern_sent = 0x0;
> +	u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
> +
> +	DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
> +
> +	if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> +			ctrl->link->phy_params.v_level,
> +			ctrl->link->phy_params.p_level)) {
> +		DRM_ERROR("Failed to set v/p levels\n");
> +		return false;
> +	}
> +	dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
> +	dp_link_send_test_response(ctrl->link);
> +
> +	pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
> +
> +	switch (pattern_sent) {
> +	case MR_LINK_TRAINING1:
> +		success = pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_D10_2;
> +		break;
> +	case MR_LINK_SYMBOL_ERM:
> +		success = (pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_ERROR_RATE)
> +			|| (pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_HBR2_EYE);
> +		break;
> +	case MR_LINK_PRBS7:
> +		success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
> +		break;
> +	case MR_LINK_CUSTOM80:
> +		success = pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
> +		break;
> +	default:
> +		success = false;
> +	}
> +
> +	DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
> +						pattern_requested);
> +	return success;
> +}
> +
> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	u32 sink_request = 0x0;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +	sink_request = ctrl->link->sink_request;
> +
> +	if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
> +		if (dp_ctrl_process_phy_test_request(ctrl)) {
> +			DRM_ERROR("process phy_test_req failed\n");
> +			return;
> +		}
> +	}
> +
> +	if (sink_request & DP_LINK_STATUS_UPDATED)
> +		if (dp_ctrl_link_maintenance(ctrl)) {
> +			DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
> +			return;
> +		}
> +
> +
> +	if (sink_request & DP_TEST_LINK_TRAINING) {
> +		dp_link_send_test_response(ctrl->link);
> +		if (dp_ctrl_link_maintenance(ctrl)) {
> +			DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
> +			return;
> +		}
> +	}
> +}
> +
> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
> +{
> +	int rc = 0;
> +	struct dp_ctrl_private *ctrl;
> +	u32 rate = 0;
> +	u32 link_train_max_retries = 10;
> +	u32 const phy_cts_pixel_clk_khz = 148500;
> +
> +	if (!dp_ctrl)
> +		return -EINVAL;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	rate = ctrl->panel->link_info.rate;
> +
> +	dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
> +	dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		DRM_DEBUG_DP("using phy test link parameters\n");
> +		if (!ctrl->panel->dp_mode.drm_mode.clock)
> +			ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
> +	} else {
> +		ctrl->link->link_params.rate = rate;
> +		ctrl->link->link_params.num_lanes =
> +			ctrl->panel->link_info.num_lanes;
> +		ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> +	}
> +
> +	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
> +		ctrl->link->link_params.rate,
> +		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
> +
> +	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> +			ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> +
> +	rc = dp_ctrl_enable_mainlink_clocks(ctrl);
> +	if (rc)
> +		return rc;
> +
> +	while (--link_train_max_retries && !atomic_read(&ctrl->dp_ctrl.aborted)) {
> +		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (rc) {
> +			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
> +			break;
> +		}
> +		rc = dp_ctrl_setup_main_link(ctrl, true);
> +		if (!rc)
> +			break;
> +		/* try with lower link rate */
> +		dp_ctrl_link_rate_down_shift(ctrl);
> +	}
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> +		dp_ctrl_send_phy_test_pattern(ctrl);
> +
> +	return rc;
> +}
> +
> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	int ret = 0;
> +
> +	if (!dp_ctrl)
> +		return -EINVAL;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> +	if (ret) {
> +		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	DRM_DEBUG_DP("DP off done\n");
> +	return ret;
> +}
> +
> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	u32 isr;
> +
> +	if (!dp_ctrl)
> +		return;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
> +
> +	if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
> +		DRM_DEBUG_DP("dp_video_ready\n");
> +		complete(&ctrl->video_comp);
> +	}
> +
> +	if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
> +		DRM_DEBUG_DP("idle_patterns_sent\n");
> +		complete(&ctrl->idle_comp);
> +	}
> +}
> +
> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
> +			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
> +			struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct dp_ctrl_private *ctrl;
> +	struct dp_ctrl *dp_ctrl;
> +
> +	if (!dev || !panel || !aux ||
> +	    !link || !catalog) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +	if (!ctrl) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	init_completion(&ctrl->idle_comp);
> +	init_completion(&ctrl->video_comp);
> +	mutex_init(&ctrl->push_idle_mutex);
> +
> +	/* in parameters */
> +	ctrl->parser   = parser;
> +	ctrl->panel    = panel;
> +	ctrl->power    = power;
> +	ctrl->aux      = aux;
> +	ctrl->link     = link;
> +	ctrl->catalog  = catalog;
> +	ctrl->dev      = dev;
> +
> +	dp_ctrl = &ctrl->dp_ctrl;
> +
> +	return dp_ctrl;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl)
> +		return;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	mutex_destroy(&ctrl->push_idle_mutex);
> +
> +	devm_kfree(ctrl->dev, ctrl);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> new file mode 100644
> index 0000000..99ab4b2
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_CTRL_H_
> +#define _DP_CTRL_H_
> +
> +#include "dp_aux.h"
> +#include "dp_panel.h"
> +#include "dp_link.h"
> +#include "dp_parser.h"
> +#include "dp_power.h"
> +#include "dp_catalog.h"
> +
> +struct dp_ctrl {
> +	bool orientation;
> +	atomic_t aborted;
> +	u32 pixel_rate;
> +};
> +
> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
> +			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
> +			struct dp_parser *parser);
> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
> +
> +#endif /* _DP_CTRL_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> new file mode 100644
> index 0000000..a893542
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -0,0 +1,949 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/debugfs.h>
> +#include <linux/component.h>
> +#include <linux/of_irq.h>
> +
> +#include "msm_drv.h"
> +#include "msm_kms.h"
> +#include "dp_extcon.h"
> +#include "dp_parser.h"
> +#include "dp_power.h"
> +#include "dp_catalog.h"
> +#include "dp_aux.h"
> +#include "dp_link.h"
> +#include "dp_panel.h"
> +#include "dp_ctrl.h"
> +#include "dp_display.h"
> +#include "dp_drm.h"
> +
> +static struct msm_dp *g_dp_display;
> +#define HPD_STRING_SIZE 30
> +
> +struct dp_display_private {
> +	char *name;
> +	int irq;
> +
> +	/* state variables */
> +	bool core_initialized;
> +	bool power_on;
> +	bool hpd_irq_on;
> +	bool audio_supported;
> +
> +	struct platform_device *pdev;
> +	struct dentry *root;
> +	struct completion notification_comp;
> +
> +	struct dp_usbpd   *usbpd;
> +	struct dp_parser  *parser;
> +	struct dp_power   *power;
> +	struct dp_catalog *catalog;
> +	struct dp_aux     *aux;
> +	struct dp_link    *link;
> +	struct dp_panel   *panel;
> +	struct dp_ctrl    *ctrl;
> +
> +	struct dp_usbpd_cb usbpd_cb;
> +	struct dp_display_mode dp_mode;
> +	struct msm_dp dp_display;
> +};
> +
> +static const struct of_device_id dp_dt_match[] = {
> +	{.compatible = "qcom,dp-display"},
> +	{}
> +};
> +
> +static irqreturn_t dp_display_irq(int irq, void *dev_id)
> +{
> +	struct dp_display_private *dp = dev_id;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid data\n");
> +		return IRQ_NONE;
> +	}
> +
> +	/* DP controller isr */
> +	dp_ctrl_isr(dp->ctrl);
> +
> +	/* DP aux isr */
> +	dp_aux_isr(dp->aux);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int dp_display_bind(struct device *dev, struct device *master,
> +			   void *data)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +	struct drm_device *drm;
> +	struct msm_drm_private *priv;
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	if (!dev || !pdev || !master) {
> +		DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
> +				dev, pdev, master);
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	drm = dev_get_drvdata(master);
> +	dp = platform_get_drvdata(pdev);
> +	if (!drm || !dp) {
> +		DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
> +				drm, dp);
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp->dp_display.drm_dev = drm;
> +	priv = drm->dev_private;
> +	priv->dp = &(dp->dp_display);
> +
> +	rc = dp->parser->parse(dp->parser);
> +	if (rc) {
> +		DRM_ERROR("device tree parsing failed\n");
> +		goto end;
> +	}
> +
> +	rc = dp_aux_register(dp->aux);
> +	if (rc) {
> +		DRM_ERROR("DRM DP AUX register failed\n");
> +		goto end;
> +	}
> +
> +	rc = dp_power_client_init(dp->power);
> +	if (rc) {
> +		DRM_ERROR("Power client create failed\n");
> +		goto end;
> +	}
> +
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_unbind(struct device *dev, struct device *master,
> +			      void *data)
> +{
> +	struct dp_display_private *dp;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct drm_device *drm = dev_get_drvdata(master);
> +	struct msm_drm_private *priv = drm->dev_private;
> +
> +	if (!dev || !pdev) {
> +		DRM_ERROR("invalid param(s)\n");
> +		return;
> +	}
> +
> +	dp = platform_get_drvdata(pdev);
> +	if (!dp) {
> +		DRM_ERROR("Invalid params\n");
> +		return;
> +	}
> +
> +	(void)dp_power_client_deinit(dp->power);
> +	(void)dp_aux_unregister(dp->aux);
> +	priv->dp = NULL;
> +}
> +
> +static const struct component_ops dp_display_comp_ops = {
> +	.bind = dp_display_bind,
> +	.unbind = dp_display_unbind,
> +};
> +
> +static bool dp_display_is_ds_bridge(struct dp_panel *panel)
> +{
> +	return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> +		DP_DWN_STRM_PORT_PRESENT);
> +}
> +
> +static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
> +{
> +	return dp_display_is_ds_bridge(dp->panel) &&
> +		(dp->link->sink_count == 0);
> +}
> +
> +static void dp_display_send_hpd_event(struct msm_dp *dp_display)
> +{
> +	struct dp_display_private *dp;
> +	struct drm_connector *connector;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	connector = dp->dp_display.connector;
> +	drm_helper_hpd_irq_event(connector->dev);
> +}
> +
> +static int dp_display_send_hpd_notification(struct dp_display_private *dp,
> +					    bool hpd)
> +{
> +	static bool encoder_mode_set = false;
> +	struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
> +	struct msm_kms *kms = priv->kms;
> +
> +	mutex_lock(&dp->dp_display.connect_mutex);
> +	if ((hpd && dp->dp_display.is_connected) ||
> +			(!hpd && !dp->dp_display.is_connected)) {
> +		DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
> +		mutex_unlock(&dp->dp_display.connect_mutex);
> +		return 0;
> +	}
> +
> +	/* reset video pattern flag on disconnect */
> +	if (!hpd)
> +		dp->panel->video_test = false;
> +
> +	dp->dp_display.is_connected = hpd;
> +	reinit_completion(&dp->notification_comp);
> +
> +	if (dp->dp_display.is_connected && dp->dp_display.encoder
> +				&& !encoder_mode_set
> +				&& kms->funcs->set_encoder_mode) {
> +		kms->funcs->set_encoder_mode(kms,
> +				dp->dp_display.encoder, false);
> +		DRM_DEBUG_DP("set_encoder_mode() Completed\n");
> +		encoder_mode_set = true;
> +	}
> +
> +	dp_display_send_hpd_event(&dp->dp_display);
> +
> +	if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
> +		pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
> +		mutex_unlock(&dp->dp_display.connect_mutex);
> +		return -EINVAL;
> +	}
> +
> +	mutex_unlock(&dp->dp_display.connect_mutex);
> +	return 0;
> +}
> +
> +static int dp_display_process_hpd_high(struct dp_display_private *dp)
> +{
> +	int rc = 0;
> +	struct edid *edid;
> +
> +	dp_aux_init(dp->aux, dp->parser->aux_cfg);
> +
> +	if (dp->link->psm_enabled)
> +		goto notify;
> +
> +	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
> +	if (rc)
> +		goto notify;
> +
> +	dp_link_process_request(dp->link);
> +
> +	if (dp_display_is_sink_count_zero(dp)) {
> +		DRM_DEBUG_DP("no downstream devices connected\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	edid = dp->panel->edid;
> +
> +	dp->audio_supported = drm_detect_monitor_audio(edid);
> +
> +	dp_panel_handle_sink_request(dp->panel);
> +
> +	dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
> +notify:
> +	dp_display_send_hpd_notification(dp, true);
> +
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_host_init(struct dp_display_private *dp)
> +{
> +	bool flip = false;
> +
> +	if (dp->core_initialized) {
> +		DRM_DEBUG_DP("DP core already initialized\n");
> +		return;
> +	}
> +
> +	if (dp->usbpd->orientation == ORIENTATION_CC2)
> +		flip = true;
> +
> +	dp_power_init(dp->power, flip);
> +	dp_ctrl_host_init(dp->ctrl, flip);
> +	enable_irq(dp->irq);
> +	dp->core_initialized = true;
> +}
> +
> +static void dp_display_host_deinit(struct dp_display_private *dp)
> +{
> +	if (!dp->core_initialized) {
> +		DRM_DEBUG_DP("DP core already off\n");
> +		return;
> +	}
> +
> +	dp_ctrl_host_deinit(dp->ctrl);
> +	dp_aux_deinit(dp->aux);
> +	dp_power_deinit(dp->power);
> +	disable_irq(dp->irq);
> +	dp->core_initialized = false;
> +}
> +
> +static void dp_display_process_hpd_low(struct dp_display_private *dp)
> +{
> +	dp_display_send_hpd_notification(dp, false);
> +
> +	dp_aux_deinit(dp->aux);
> +}
> +
> +static int dp_display_usbpd_configure_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		rc = -ENODEV;
> +		goto end;
> +	}
> +
> +	dp_display_host_init(dp);
> +
> +	if (dp->usbpd->hpd_high)
> +		dp_display_process_hpd_high(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_clean(struct dp_display_private *dp)
> +{
> +	dp_ctrl_push_idle(dp->ctrl);
> +	dp_ctrl_off(dp->ctrl);
> +}
> +
> +static int dp_display_usbpd_disconnect_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		rc = -ENODEV;
> +		goto end;
> +	}
> +
> +	rc = dp_display_send_hpd_notification(dp, false);
> +
> +	/* if cable is disconnected, reset psm_enabled flag */
> +	if (!dp->usbpd->alt_mode_cfg_done)
> +		dp->link->psm_enabled = false;
> +
> +	if ((rc < 0) && dp->power_on)
> +		dp_display_clean(dp);
> +
> +	dp_display_host_deinit(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_handle_video_request(struct dp_display_private *dp)
> +{
> +	if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
> +		/* force disconnect followed by connect */
> +		dp->usbpd->connect(dp->usbpd, false);
> +		dp->panel->video_test = true;
> +		dp->usbpd->connect(dp->usbpd, true);
> +		dp_link_send_test_response(dp->link);
> +	}
> +}
> +
> +static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
> +{
> +	if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
> +		dp_display_send_hpd_notification(dp, false);
> +
> +		if (dp_display_is_sink_count_zero(dp)) {
> +			DRM_DEBUG_DP("sink count is zero, nothing to do\n");
> +			return 0;
> +		}
> +
> +		return dp_display_process_hpd_high(dp);
> +	}
> +
> +	dp_ctrl_handle_sink_request(dp->ctrl);
> +
> +	dp_display_handle_video_request(dp);
> +
> +	return 0;
> +}
> +
> +static int dp_display_usbpd_attention_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		return -EINVAL;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		return -ENODEV;
> +	}
> +
> +	if (dp->usbpd->hpd_irq) {
> +		dp->hpd_irq_on = true;
> +
> +		rc = dp_link_process_request(dp->link);
> +		/* check for any test request issued by sink */
> +		if (!rc)
> +			dp_display_handle_hpd_irq(dp);
> +
> +		dp->hpd_irq_on = false;
> +		goto end;
> +	}
> +
> +	if (!dp->usbpd->hpd_high) {
> +		dp_display_process_hpd_low(dp);
> +		goto end;
> +	}
> +
> +	if (dp->usbpd->alt_mode_cfg_done)
> +		dp_display_process_hpd_high(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
> +{
> +	dp_ctrl_put(dp->ctrl);
> +	dp_link_put(dp->link);
> +	dp_panel_put(dp->panel);
> +	dp_aux_put(dp->aux);
> +	dp_power_put(dp->power);
> +	dp_catalog_put(dp->catalog);
> +	dp_parser_put(dp->parser);
> +}
> +
> +static int dp_init_sub_modules(struct dp_display_private *dp)
> +{
> +	int rc = 0;
> +	struct device *dev = &dp->pdev->dev;
> +	struct dp_usbpd_cb *cb = &dp->usbpd_cb;
> +	struct dp_panel_in panel_in = {
> +		.dev = dev,
> +	};
> +
> +	/* Callback APIs used for cable status change event */
> +	cb->configure  = dp_display_usbpd_configure_cb;
> +	cb->disconnect = dp_display_usbpd_disconnect_cb;
> +	cb->attention  = dp_display_usbpd_attention_cb;
> +
> +	dp->parser = dp_parser_get(dp->pdev);
> +	if (IS_ERR(dp->parser)) {
> +		rc = PTR_ERR(dp->parser);
> +		DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
> +		dp->parser = NULL;
> +		goto error_parser;
> +	}
> +
> +	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
> +	if (IS_ERR(dp->catalog)) {
> +		rc = PTR_ERR(dp->catalog);
> +		DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
> +		dp->catalog = NULL;
> +		goto error_catalog;
> +	}
> +
> +	dp->power = dp_power_get(dp->parser);
> +	if (IS_ERR(dp->power)) {
> +		rc = PTR_ERR(dp->power);
> +		DRM_ERROR("failed to initialize power, rc = %d\n", rc);
> +		dp->power = NULL;
> +		goto error_power;
> +	}
> +
> +	dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
> +	if (IS_ERR(dp->aux)) {
> +		rc = PTR_ERR(dp->aux);
> +		DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
> +		dp->aux = NULL;
> +		goto error_aux;
> +	}
> +
> +	dp->link = dp_link_get(dev, dp->aux);
> +	if (IS_ERR(dp->link)) {
> +		rc = PTR_ERR(dp->link);
> +		DRM_ERROR("failed to initialize link, rc = %d\n", rc);
> +		dp->link = NULL;
> +		goto error_link;
> +	}
> +
> +	panel_in.aux = dp->aux;
> +	panel_in.catalog = dp->catalog;
> +	panel_in.link = dp->link;
> +
> +	dp->panel = dp_panel_get(&panel_in);
> +	if (IS_ERR(dp->panel)) {
> +		rc = PTR_ERR(dp->panel);
> +		DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> +		dp->panel = NULL;
> +		goto error_panel;
> +	}
> +
> +	dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
> +			       dp->power, dp->catalog, dp->parser);
> +	if (IS_ERR(dp->ctrl)) {
> +		rc = PTR_ERR(dp->ctrl);
> +		DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
> +		dp->ctrl = NULL;
> +		goto error_ctrl;
> +	}
> +
> +	return rc;
> +error_ctrl:
> +	dp_panel_put(dp->panel);
> +error_panel:
> +	dp_link_put(dp->link);
> +error_link:
> +	dp_aux_put(dp->aux);
> +error_aux:
> +	dp_power_put(dp->power);
> +error_power:
> +	dp_catalog_put(dp->catalog);
> +error_catalog:
> +	dp_parser_put(dp->parser);
> +error_parser:
> +	return rc;
> +}
> +
> +static int dp_display_set_mode(struct msm_dp *dp_display,
> +			       struct dp_display_mode *mode)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	dp->panel->dp_mode.drm_mode = mode->drm_mode;
> +	dp->panel->dp_mode.bpp = mode->bpp;
> +	dp->panel->dp_mode.capabilities = mode->capabilities;
> +	dp_panel_init_panel_info(dp->panel);
> +	return rc;
> +}
> +
> +static int dp_display_prepare(struct msm_dp *dp)
> +{
> +	return 0;
> +}
> +
> +static int dp_display_enable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (dp->power_on) {
> +		DRM_DEBUG_DP("Link already setup, return\n");
> +		return 0;
> +	}
> +
> +	dp_aux_init(dp->aux, dp->parser->aux_cfg);
> +
> +	rc = dp_ctrl_on(dp->ctrl);
> +	if (!rc)
> +		dp->power_on = true;
> +
> +	return rc;
> +}
> +
> +static int dp_display_post_enable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	complete_all(&dp->notification_comp);
> +	return rc;
> +}
> +
> +static int dp_display_pre_disable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (dp->usbpd->alt_mode_cfg_done)
> +		dp_link_psm_config(dp->link, &dp->panel->link_info, true);
> +
> +	dp_ctrl_push_idle(dp->ctrl);
> +	return rc;
> +}
> +
> +static int dp_display_disable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (!dp->power_on || !dp->core_initialized)
> +		goto error;
> +
> +	dp_ctrl_off(dp->ctrl);
> +
> +	dp->power_on = false;
> +
> +	complete_all(&dp->notification_comp);
> +error:
> +	return rc;
> +}
> +
> +int dp_display_request_irq(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dp_display) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> +	if (dp->irq < 0) {
> +		rc = dp->irq;
> +		DRM_ERROR("failed to get irq: %d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
> +		IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> +	if (rc < 0) {
> +		DRM_ERROR("failed to request IRQ%u: %d\n",
> +				dp->irq, rc);
> +		return rc;
> +	}
> +	disable_irq(dp->irq);
> +
> +	return 0;
> +}
> +
> +static int dp_display_unprepare(struct msm_dp *dp)
> +{
> +	return 0;
> +}
> +
> +int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
> +{
> +	const u32 num_components = 3, default_bpp = 24;
> +	struct dp_display_private *dp_display;
> +	struct drm_dp_link *link_info;
> +	u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
> +
> +	if (!dp || !mode_pclk_khz || !dp->connector) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +	link_info = &dp_display->panel->link_info;
> +
> +	mode_bpp = dp->connector->display_info.bpc * num_components;
> +	if (!mode_bpp)
> +		mode_bpp = default_bpp;
> +
> +	mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
> +			mode_bpp, mode_pclk_khz);
> +
> +	mode_rate_khz = mode_pclk_khz * mode_bpp;
> +	supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
> +
> +	if (mode_rate_khz > supported_rate_khz)
> +		return MODE_BAD;
> +
> +	return MODE_OK;
> +}
> +
> +int dp_display_get_modes(struct msm_dp *dp,
> +				struct dp_display_mode *dp_mode)
> +{
> +	struct dp_display_private *dp_display;
> +	int ret = 0;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return 0;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	ret = dp_panel_get_modes(dp_display->panel,
> +		dp->connector, dp_mode);
> +	if (dp_mode->drm_mode.clock)
> +		dp->max_pclk_khz = dp_mode->drm_mode.clock;
> +	return ret;
> +}
> +
> +bool dp_display_check_video_test(struct msm_dp *dp)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return false;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	if (dp_display->panel->video_test)
> +		return true;
> +
> +	return false;
> +}
> +
> +int dp_display_get_test_bpp(struct msm_dp *dp)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return 0;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	return dp_link_bit_depth_to_bpp(
> +		dp_display->link->test_video.test_bit_depth);
> +}
> +
> +static int dp_display_probe(struct platform_device *pdev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!pdev || !pdev->dev.of_node) {
> +		DRM_ERROR("pdev not found\n");
> +		return -ENODEV;
> +	}
> +
> +	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
> +	if (!dp)
> +		return -ENOMEM;
> +
> +	init_completion(&dp->notification_comp);
> +
> +	dp->pdev = pdev;
> +	dp->name = "drm_dp";
> +
> +	rc = dp_init_sub_modules(dp);
> +	if (rc) {
> +		DRM_ERROR("init sub module failed\n");
> +		devm_kfree(&pdev->dev, dp);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	platform_set_drvdata(pdev, dp);
> +
> +	mutex_init(&dp->dp_display.connect_mutex);
> +	g_dp_display = &dp->dp_display;
> +
> +	rc = component_add(&pdev->dev, &dp_display_comp_ops);
> +	if (rc) {
> +		DRM_ERROR("component add failed, rc=%d\n", rc);
> +		dp_display_deinit_sub_modules(dp);
> +		devm_kfree(&pdev->dev, dp);
> +	}
> +
> +	return rc;
> +}
> +
> +static int dp_display_remove(struct platform_device *pdev)
> +{
> +	struct dp_display_private *dp;
> +
> +	if (!pdev)
> +		return -EINVAL;
> +
> +	dp = platform_get_drvdata(pdev);
> +
> +	dp_display_deinit_sub_modules(dp);
> +
> +	platform_set_drvdata(pdev, NULL);
> +	devm_kfree(&pdev->dev, dp);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver dp_display_driver = {
> +	.probe  = dp_display_probe,
> +	.remove = dp_display_remove,
> +	.driver = {
> +		.name = "msm-dp-display",
> +		.of_match_table = dp_dt_match,
> +	},
> +};
> +
> +int __init msm_dp_register(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&dp_display_driver);
> +	if (ret) {
> +		DRM_ERROR("driver register failed");
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +void __exit msm_dp_unregister(void)
> +{
> +	platform_driver_unregister(&dp_display_driver);
> +}
> +
> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> +			struct drm_encoder *encoder)
> +{
> +	struct msm_drm_private *priv;
> +	int ret;
> +
> +	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
> +		return -EINVAL;
> +
> +	priv = dev->dev_private;
> +	dp_display->drm_dev = dev;
> +
> +	ret = dp_display_request_irq(dp_display);
> +	if (ret) {
> +		DRM_ERROR("request_irq failed, ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	dp_display->encoder = encoder;
> +
> +	dp_display->connector = dp_drm_connector_init(dp_display);
> +	if (IS_ERR(dp_display->connector)) {
> +		ret = PTR_ERR(dp_display->connector);
> +		DRM_DEV_ERROR(dev->dev,
> +			"failed to create dp connector: %d\n", ret);
> +		dp_display->connector = NULL;
> +		return ret;
> +	}
> +
> +	priv->connectors[priv->num_connectors++] = dp_display->connector;
> +	return 0;
> +}
> +
> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp_display;
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +	if (!dp_display->dp_mode.drm_mode.clock) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
> +	if (rc) {
> +		DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_prepare(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_enable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display enable failed, rc=%d\n", rc);
> +		dp_display_unprepare(dp);
> +		return rc;
> +	}
> +
> +	rc = dp_display_post_enable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
> +		dp_display_disable(dp);
> +		dp_display_unprepare(dp);
> +	}
> +	return rc;
> +}
> +
> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	int rc = 0;
> +
> +	rc = dp_display_pre_disable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_disable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display disable failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_unprepare(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
> +	}
> +	return rc;
> +}
> +
> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
> +
> +	if (dp_display_check_video_test(dp))
> +		dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
> +	else /* Default num_components per pixel = 3 */
> +		dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
> +
> +	if (!dp_display->dp_mode.bpp)
> +		dp_display->dp_mode.bpp = 24; /* Default bpp */
> +
> +	drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
> +
> +	dp_display->dp_mode.v_active_low =
> +		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
> +
> +	dp_display->dp_mode.h_active_low =
> +		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> new file mode 100644
> index 0000000..c916408
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_DISPLAY_H_
> +#define _DP_DISPLAY_H_
> +
> +#include <drm/drmP.h>
> +
> +#include "dp_panel.h"
> +
> +struct msm_dp {
> +	struct drm_device *drm_dev;
> +	struct drm_connector *connector;
> +	struct drm_encoder *encoder;
> +	bool is_connected;
> +	struct mutex connect_mutex;
> +	u32 max_pclk_khz;
> +};
> +
> +int dp_display_validate_mode(struct msm_dp *dp_display, u32 mode_pclk_khz);
> +int dp_display_get_modes(struct msm_dp *dp_display,
> +		struct dp_display_mode *dp_mode);
> +int dp_display_request_irq(struct msm_dp *dp_display);
> +bool dp_display_check_video_test(struct msm_dp *dp_display);
> +int dp_display_get_test_bpp(struct msm_dp *dp_display);
> +
> +#endif /* _DP_DISPLAY_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> new file mode 100644
> index 0000000..a72b0bb
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp]: %s: " fmt, __func__
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_crtc.h>
> +
> +#include "msm_drv.h"
> +#include "msm_kms.h"
> +#include "dp_drm.h"
> +
> +struct dp_connector {
> +	struct drm_connector base;
> +	struct msm_dp *dp_display;
> +};
> +#define to_dp_connector(x) container_of(x, struct dp_connector, base)
> +
> +/**
> + * dp_connector_detect - callback to determine if connector is connected
> + * @connector: Pointer to drm connector structure
> + * @force: Force detect setting from drm framework
> + * Returns: Connector 'is connected' status
> + */
> +static enum drm_connector_status dp_connector_detect(struct drm_connector *conn,
> +		bool force)
> +{
> +	struct msm_dp *dp;
> +
> +	dp = to_dp_connector(conn)->dp_display;
> +
> +	DRM_DEBUG_DP("is_connected = %s\n",
> +		(dp->is_connected) ? "true" : "false");
> +
> +	return (dp->is_connected) ? connector_status_connected :
> +					connector_status_disconnected;
> +}
> +
> +/**
> + * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add()
> + * @connector: Pointer to drm connector structure
> + * Returns: Number of modes added
> + */
> +static int dp_connector_get_modes(struct drm_connector *connector)
> +{
> +	int rc = 0;
> +	struct msm_dp *dp;
> +	struct dp_display_mode *dp_mode = NULL;
> +	struct drm_display_mode *m, drm_mode;
> +
> +	if (!connector)
> +		return 0;
> +
> +	dp = to_dp_connector(connector)->dp_display;
> +
> +	dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
> +	if (!dp_mode)
> +		return 0;
> +
> +	mutex_lock(&dp->connect_mutex);
> +	/* pluggable case assumes EDID is read when HPD */
> +	if (dp->is_connected) {
> +		/*
> +		 *The get_modes() function might return one mode that is stored
> +		 * in dp_mode when compliance test is in progress. If not, the
> +		 * return value is equal to the total number of modes supported
> +		 * by the sink
> +		 */
> +		rc = dp_display_get_modes(dp, dp_mode);
> +		if (rc <= 0) {
> +			DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
> +			mutex_unlock(&dp->connect_mutex);
> +			return rc;
> +		}
> +		if (dp_mode->drm_mode.clock) { /* valid DP mode */
> +			memset(&drm_mode, 0x0, sizeof(drm_mode));
> +			drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
> +			m = drm_mode_duplicate(connector->dev, &drm_mode);
> +			if (!m) {
> +				DRM_ERROR("failed to add mode %ux%u\n",
> +				       drm_mode.hdisplay,
> +				       drm_mode.vdisplay);
> +				kfree(dp_mode);
> +				mutex_unlock(&dp->connect_mutex);
> +				return 0;
> +			}
> +			drm_mode_probed_add(connector, m);
> +		}
> +	} else {
> +		DRM_DEBUG_DP("No sink connected\n");
> +	}
> +	mutex_unlock(&dp->connect_mutex);
> +	kfree(dp_mode);
> +	return rc;
> +}
> +
> +/**
> + * dp_connector_mode_valid - callback to determine if specified mode is valid
> + * @connector: Pointer to drm connector structure
> + * @mode: Pointer to drm mode structure
> + * Returns: Validity status for specified mode
> + */
> +static enum drm_mode_status dp_connector_mode_valid(struct drm_connector *connector,
> +		struct drm_display_mode *mode)
> +{
> +	struct msm_dp *dp_disp;
> +
> +	if (!mode || !connector) {
> +		DRM_ERROR("invalid params\n");
> +		return MODE_ERROR;
> +	}
> +
> +	dp_disp = to_dp_connector(connector)->dp_display;
> +
> +	mode->vrefresh = drm_mode_vrefresh(mode);
> +
> +	if ((dp_disp->max_pclk_khz <= 0) ||
> +			(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
> +			(mode->clock > dp_disp->max_pclk_khz))
> +		return MODE_BAD;
> +
> +	return dp_display_validate_mode(dp_disp, mode->clock);
> +}
> +
> +static const struct drm_connector_funcs dp_connector_funcs = {
> +	.detect = dp_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_connector_helper_funcs dp_connector_helper_funcs = {
> +	.get_modes = dp_connector_get_modes,
> +	.mode_valid = dp_connector_mode_valid,
> +};
> +
> +/* connector initialization */
> +struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
> +{
> +	struct drm_connector *connector = NULL;
> +	struct dp_connector *dp_connector;
> +	int ret;
> +
> +	dp_connector = devm_kzalloc(dp_display->drm_dev->dev, sizeof(*dp_connector),
> +				    GFP_KERNEL);
> +	if (!dp_connector)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dp_connector->dp_display = dp_display;
> +
> +	connector = &dp_connector->base;
> +
> +	ret = drm_connector_init(dp_display->drm_dev, connector, &dp_connector_funcs,
> +			DRM_MODE_CONNECTOR_DisplayPort);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	drm_connector_helper_add(connector, &dp_connector_helper_funcs);
> +
> +	/*
> +	 * Enable HPD to let hpd event is handled when cable is attached to the host.
> +	 */
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_attach_encoder(connector, dp_display->encoder);
> +
> +	return connector;
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> new file mode 100644
> index 0000000..cf472c5
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_DRM_H_
> +#define _DP_DRM_H_
> +
> +#include <linux/types.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +
> +#include "msm_drv.h"
> +#include "dp_display.h"
> +
> +struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display);
> +
> +#endif /* _DP_DRM_H_ */
> +
> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c b/drivers/gpu/drm/msm/dp/dp_extcon.c
> new file mode 100644
> index 0000000..0fb34ef
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
> @@ -0,0 +1,216 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/extcon.h>
> +#include <drm/drmP.h>
> +
> +#include "dp_extcon.h"
> +
> +/* DP specific VDM commands */
> +#define DP_USBPD_VDM_STATUS	0x10
> +#define DP_USBPD_VDM_CONFIGURE	0x11
> +
> +/* USBPD-TypeC specific Macros */
> +#define VDM_VERSION		0x0
> +#define USB_C_DP_SID		0xFF01
> +
> +struct dp_extcon_private {
> +	u32 vdo;
> +	struct device *dev;
> +	struct notifier_block extcon_nb;
> +	struct extcon_dev *extcon;
> +	struct workqueue_struct *extcon_wq;
> +	struct work_struct event_work;
> +	struct usbpd *pd;
> +	struct dp_usbpd_cb *dp_cb;
> +	struct dp_usbpd dp_usbpd;
> +};
> +
> +static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
> +{
> +	int rc = 0;
> +	struct dp_extcon_private *extcon_priv;
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	dp_usbpd->hpd_high = hpd;
> +
> +	if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
> +				&& !extcon_priv->dp_cb->disconnect) {
> +		DRM_ERROR("extcon dp_cb not initialized\n");
> +		return -EINVAL;
> +	}
> +	if (hpd)
> +		extcon_priv->dp_cb->configure(extcon_priv->dev);
> +	else
> +		extcon_priv->dp_cb->disconnect(extcon_priv->dev);
> +
> +	return rc;
> +}
> +
> +static void dp_extcon_event_work(struct work_struct *work)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +	int dp_state, ret;
> +	union extcon_property_value property;
> +
> +	extcon_priv = container_of(work,
> +			struct dp_extcon_private, event_work);
> +
> +	if (!extcon_priv || !extcon_priv->extcon) {
> +		DRM_ERROR("Invalid extcon device handler\n");
> +		return;
> +	}
> +
> +	dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
> +
> +	if (dp_state > 0) {
> +		ret = extcon_get_property(extcon_priv->extcon,
> +					EXTCON_DISP_DP,
> +					EXTCON_PROP_USB_TYPEC_POLARITY,
> +					&property);
> +		if (ret) {
> +			DRM_ERROR("Get Polarity property failed\n");
> +			return;
> +		}
> +		extcon_priv->dp_usbpd.orientation =
> +			(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
> +
> +		extcon_get_property(extcon_priv->extcon,
> +					EXTCON_DISP_DP,
> +					EXTCON_PROP_USB_SS,
> +					&property);
> +		extcon_priv->dp_usbpd.multi_func =
> +				((property.intval) ? true : false);
> +
> +		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
> +		if (ret) {
> +			DRM_ERROR("extcon_connect->true failed\n");
> +			return;
> +		}
> +	} else {
> +		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
> +		if (ret) {
> +			DRM_ERROR("extcon_connect->false failed\n");
> +			return;
> +		}
> +	}
> +}
> +
> +static int dp_extcon_event_notify(struct notifier_block *nb,
> +				  unsigned long event, void *priv)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +
> +	extcon_priv = container_of(nb, struct dp_extcon_private,
> +						extcon_nb);
> +
> +	queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
> +	return NOTIFY_DONE;
> +}
> +
> +int dp_extcon_register(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +	int ret = 0;
> +
> +	if (!dp_usbpd)
> +		return -EINVAL;
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
> +	ret = devm_extcon_register_notifier(extcon_priv->dev, extcon_priv->extcon,
> +					    EXTCON_DISP_DP,
> +					    &extcon_priv->extcon_nb);
> +	if (ret) {
> +		DRM_DEV_ERROR(extcon_priv->dev,
> +			"register EXTCON_DISP_DP notifier err\n");
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	extcon_priv->extcon_wq = create_singlethread_workqueue("drm_dp_extcon");
> +	if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
> +		DRM_ERROR("Failed to create workqueue\n");
> +		dp_extcon_unregister(dp_usbpd);
> +		return -EPERM;
> +	}
> +
> +	INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
> +	return ret;
> +}
> +
> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +
> +	if (!dp_usbpd) {
> +		DRM_ERROR("Invalid input\n");
> +		return;
> +	}
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	devm_extcon_unregister_notifier(extcon_priv->dev, extcon_priv->extcon,
> +					    EXTCON_DISP_DP,
> +					    &extcon_priv->extcon_nb);
> +
> +	if (extcon_priv->extcon_wq)
> +		destroy_workqueue(extcon_priv->extcon_wq);
> +
> +	return;
> +}
> +
> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb)
> +{
> +	int rc = 0;
> +	struct dp_extcon_private *dp_extcon;
> +	struct dp_usbpd *dp_usbpd;
> +
> +	if (!cb) {
> +		DRM_ERROR("invalid cb data\n");
> +		rc = -EINVAL;
> +		return ERR_PTR(rc);
> +	}
> +
> +	dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
> +	if (!dp_extcon) {
> +		rc = -ENOMEM;
> +		return ERR_PTR(rc);
> +	}
> +
> +	dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
> +	if (!dp_extcon->extcon) {
> +		DRM_ERROR("invalid extcon data\n");
> +		rc = -EINVAL;
> +		devm_kfree(dev, dp_extcon);
> +		return ERR_PTR(rc);
> +        }
> +
> +	dp_extcon->dev = dev;
> +	dp_extcon->dp_cb = cb;
> +
> +	dp_extcon->dp_usbpd.connect = dp_extcon_connect;
> +	dp_usbpd = &dp_extcon->dp_usbpd;
> +
> +	return dp_usbpd;
> +}
> +
> +void dp_extcon_put(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon;
> +
> +	if (!dp_usbpd)
> +		return;
> +
> +	extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	devm_kfree(extcon->dev, extcon);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h b/drivers/gpu/drm/msm/dp/dp_extcon.h
> new file mode 100644
> index 0000000..c6c3051
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
> @@ -0,0 +1,84 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_EXTCON_H_
> +#define _DP_EXTCON_H_
> +
> +//#include <linux/usb/usbpd.h>
> +
> +#include <linux/types.h>
> +#include <linux/device.h>
> +
> +enum plug_orientation {
> +	ORIENTATION_NONE,
> +	ORIENTATION_CC1,
> +	ORIENTATION_CC2,
> +};
> +
> +/**
> + * struct dp_usbpd - DisplayPort status
> + *
> + * @orientation: plug orientation configuration
> + * @low_pow_st: low power state
> + * @adaptor_dp_en: adaptor functionality enabled
> + * @multi_func: multi-function preferred
> + * @usb_config_req: request to switch to usb
> + * @exit_dp_mode: request exit from displayport mode
> + * @hpd_high: Hot Plug Detect signal is high.
> + * @hpd_irq: Change in the status since last message
> + * @alt_mode_cfg_done: bool to specify alt mode status
> + * @debug_en: bool to specify debug mode
> + * @connect: simulate disconnect or connect for debug mode
> + */
> +struct dp_usbpd {
> +	enum plug_orientation orientation;
> +	bool low_pow_st;
> +	bool adaptor_dp_en;
> +	bool multi_func;
> +	bool usb_config_req;
> +	bool exit_dp_mode;
> +	bool hpd_high;
> +	bool hpd_irq;
> +	bool alt_mode_cfg_done;
> +	bool debug_en;
> +
> +	int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
> +};
> +
> +/**
> + * struct dp_usbpd_cb - callback functions provided by the client
> + *
> + * @configure: called by usbpd module when PD communication has
> + * been completed and the usb peripheral has been configured on
> + * dp mode.
> + * @disconnect: notify the cable disconnect issued by usb.
> + * @attention: notify any attention message issued by usb.
> + */
> +struct dp_usbpd_cb {
> +	int (*configure)(struct device *dev);
> +	int (*disconnect)(struct device *dev);
> +	int (*attention)(struct device *dev);
> +};
> +
> +/**
> + * dp_extcon_get() - setup usbpd module
> + *
> + * @dev: device instance of the caller
> + * @cb: struct containing callback function pointers.
> + *
> + * This function allows the client to initialize the usbpd
> + * module. The module will communicate with usb driver and
> + * handles the power delivery (PD) communication with the
> + * sink/usb device. This module will notify the client using
> + * the callback functions about the connection and status.
> + */
> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb);
> +
> +void dp_extcon_put(struct dp_usbpd *pd);
> +
> +int dp_extcon_register(struct dp_usbpd *dp_usbpd);
> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
> +
> +#endif /* _DP_EXTCON_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> new file mode 100644
> index 0000000..9f5b7bc8
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -0,0 +1,1185 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include "dp_link.h"
> +#include "dp_panel.h"
> +
> +#define DP_TEST_REQUEST_MASK		0x7F
> +
> +enum audio_sample_rate {
> +	AUDIO_SAMPLE_RATE_32_KHZ	= 0x00,
> +	AUDIO_SAMPLE_RATE_44_1_KHZ	= 0x01,
> +	AUDIO_SAMPLE_RATE_48_KHZ	= 0x02,
> +	AUDIO_SAMPLE_RATE_88_2_KHZ	= 0x03,
> +	AUDIO_SAMPLE_RATE_96_KHZ	= 0x04,
> +	AUDIO_SAMPLE_RATE_176_4_KHZ	= 0x05,
> +	AUDIO_SAMPLE_RATE_192_KHZ	= 0x06,
> +};
> +
> +enum audio_pattern_type {
> +	AUDIO_TEST_PATTERN_OPERATOR_DEFINED	= 0x00,
> +	AUDIO_TEST_PATTERN_SAWTOOTH		= 0x01,
> +};
> +
> +struct dp_link_request {
> +	u32 test_requested;
> +	u32 test_link_rate;
> +	u32 test_lane_count;
> +};
> +
> +struct dp_link_private {
> +	u32 prev_sink_count;
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_link dp_link;
> +
> +	struct dp_link_request request;
> +	struct mutex test_response_mutex;
> +	struct mutex psm_mutex;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +};
> +
> +static int dp_link_get_period(struct dp_link_private *link, int const addr)
> +{
> +	int ret = 0;
> +	u8 data;
> +	u32 const max_audio_period = 0xA;
> +
> +	/* TEST_AUDIO_PERIOD_CH_XX */
> +	if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
> +		DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	/* Period - Bits 3:0 */
> +	data = data & 0xF;
> +	if ((int)data > max_audio_period) {
> +		DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	ret = data;
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_channel_period(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	struct dp_link_test_audio *req = &link->dp_link.test_audio;
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_1 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_2 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
> +
> +	/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_3 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_4 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_5 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_6 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_7 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_8 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_pattern_type(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +	int const max_audio_pattern_type = 0x1;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> +				DP_TEST_AUDIO_PATTERN_TYPE, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Audio Pattern Type - Bits 7:0 */
> +	if ((int)data > max_audio_pattern_type) {
> +		DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	link->dp_link.test_audio.test_audio_pattern_type = data;
> +	DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_mode(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +	int const max_audio_sampling_rate = 0x6;
> +	int const max_audio_channel_count = 0x8;
> +	int sampling_rate = 0x0;
> +	int channel_count = 0x0;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Sampling Rate - Bits 3:0 */
> +	sampling_rate = data & 0xF;
> +	if (sampling_rate > max_audio_sampling_rate) {
> +		DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
> +				sampling_rate, max_audio_sampling_rate);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	/* Channel Count - Bits 7:4 */
> +	channel_count = ((data & 0xF0) >> 4) + 1;
> +	if (channel_count > max_audio_channel_count) {
> +		DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
> +				channel_count, max_audio_channel_count);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
> +	link->dp_link.test_audio.test_audio_channel_count = channel_count;
> +	DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
> +					sampling_rate, channel_count);
> +exit:
> +	return ret;
> +}
> +
> +/**
> + * dp_parse_audio_pattern_params() - parses audio pattern parameters from DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the audio link pattern parameters.
> + */
> +static int dp_link_parse_audio_pattern_params(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	ret = dp_link_parse_audio_mode(link);
> +	if (ret)
> +		goto exit;
> +
> +	ret = dp_link_parse_audio_pattern_type(link);
> +	if (ret)
> +		goto exit;
> +
> +	ret = dp_link_parse_audio_channel_period(link);
> +
> +exit:
> +	return ret;
> +}
> +
> +/**
> + * dp_link_is_video_pattern_valid() - validates the video pattern
> + * @pattern: video pattern requested by the sink
> + *
> + * Returns true if the requested video pattern is supported.
> + */
> +static bool dp_link_is_video_pattern_valid(u32 pattern)
> +{
> +	switch (pattern) {
> +	case DP_NO_TEST_PATTERN:
> +	case DP_COLOR_RAMP:
> +	case DP_BLACK_AND_WHITE_VERTICAL_LINES:
> +	case DP_COLOR_SQUARE:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +/**
> + * dp_link_is_bit_depth_valid() - validates the bit depth requested
> + * @bit_depth: bit depth requested by the sink
> + *
> + * Returns true if the requested bit depth is supported.
> + */
> +static bool dp_link_is_bit_depth_valid(u32 tbd)
> +{
> +	/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
> +	switch (tbd) {
> +	case DP_TEST_BIT_DEPTH_6:
> +	case DP_TEST_BIT_DEPTH_8:
> +	case DP_TEST_BIT_DEPTH_10:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static int dp_link_parse_timing_params1(struct dp_link_private *link,
> +					int addr, int len, u32 *val)
> +{
> +	u8 bp[2];
> +	int rlen;
> +
> +	if (len != 2)
> +		return -EINVAL;
> +
> +	/* Read the requested video link pattern (Byte 0x221). */
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> +	if (rlen < len) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +
> +	*val = bp[1] | (bp[0] << 8);
> +
> +	return 0;
> +}
> +
> +static int dp_link_parse_timing_params2(struct dp_link_private *link,
> +					int addr, int len,
> +					u32 *val1, u32 *val2)
> +{
> +	u8 bp[2];
> +	int rlen;
> +
> +	if (len != 2)
> +		return -EINVAL;
> +
> +	/* Read the requested video link pattern (Byte 0x221). */
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> +	if (rlen < len) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +
> +	*val1 = (bp[0] & BIT(7)) >> 7;
> +	*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
> +
> +	return 0;
> +}
> +
> +static int dp_link_parse_timing_params3(struct dp_link_private *link,
> +					int addr, u32 *val)
> +{
> +	u8 bp;
> +	u32 len = 1;
> +	int rlen;
> +
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
> +	if (rlen < 1) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +	*val = bp;
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_parse_video_pattern_params() - parses video pattern parameters from DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the video link pattern and the link
> + * bit depth requested by the sink and, and if the values parsed are valid.
> + */
> +static int dp_link_parse_video_pattern_params(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	ssize_t rlen;
> +	u8 bp;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!dp_link_is_video_pattern_valid(bp)) {
> +		DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	link->dp_link.test_video.test_video_pattern = bp;
> +
> +	/* Read the requested color bit depth and dynamic range (Byte 0x232) */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Dynamic Range */
> +	link->dp_link.test_video.test_dyn_range = (bp & DP_TEST_DYNAMIC_RANGE_CEA);
> +
> +	/* Color bit depth */
> +	bp &= DP_TEST_BIT_DEPTH_MASK;
> +	if (!dp_link_is_bit_depth_valid(bp)) {
> +		DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	link->dp_link.test_video.test_bit_depth = bp;
> +
> +	/* resolution timing params */
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
> +			&link->dp_link.test_video.test_h_total);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
> +			&link->dp_link.test_video.test_v_total);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
> +			&link->dp_link.test_video.test_h_start);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
> +			&link->dp_link.test_video.test_v_start);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
> +			&link->dp_link.test_video.test_hsync_pol,
> +			&link->dp_link.test_video.test_hsync_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
> +			&link->dp_link.test_video.test_vsync_pol,
> +			&link->dp_link.test_video.test_vsync_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
> +			&link->dp_link.test_video.test_h_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
> +			&link->dp_link.test_video.test_v_height);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
> +		&link->dp_link.test_video.test_rr_d);
> +	link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR,
> +		&link->dp_link.test_video.test_rr_n);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_rr_n (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
> +		return ret;
> +	}
> +
> +	DRM_DEBUG_DP("link video pattern = 0x%x\n" \
> +		"link dynamic range = 0x%x\n" \
> +		"link bit depth = 0x%x\n" \
> +		"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
> +		"TEST_H_START = %d, TEST_V_START = %d\n" \
> +		"TEST_HSYNC_POL = %d\n" \
> +		"TEST_HSYNC_WIDTH = %d\n" \
> +		"TEST_VSYNC_POL = %d\n" \
> +		"TEST_VSYNC_WIDTH = %d\n" \
> +		"TEST_H_WIDTH = %d\n" \
> +		"TEST_V_HEIGHT = %d\n" \
> +		"TEST_REFRESH_DENOMINATOR = %d\n" \
> +		 "TEST_REFRESH_NUMERATOR = %d\n",
> +		link->dp_link.test_video.test_video_pattern,
> +		link->dp_link.test_video.test_dyn_range,
> +		link->dp_link.test_video.test_bit_depth,
> +		link->dp_link.test_video.test_h_total,
> +		link->dp_link.test_video.test_v_total,
> +		link->dp_link.test_video.test_h_start,
> +		link->dp_link.test_video.test_v_start,
> +		link->dp_link.test_video.test_hsync_pol,
> +		link->dp_link.test_video.test_hsync_width,
> +		link->dp_link.test_video.test_vsync_pol,
> +		link->dp_link.test_video.test_vsync_width,
> +		link->dp_link.test_video.test_h_width,
> +		link->dp_link.test_video.test_v_height,
> +		link->dp_link.test_video.test_rr_d,
> +		link->dp_link.test_video.test_rr_n);
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_parse_link_training_params() - parses link training parameters from
> + * DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane
> + * count (Byte 0x220), and if these values parse are valid.
> + */
> +static int dp_link_parse_link_training_params(struct dp_link_private *link)
> +{
> +	u8 bp;
> +	ssize_t rlen;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,	&bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!is_link_rate_valid(bp)) {
> +		DRM_ERROR("invalid link rate = 0x%x\n", bp);
> +		return -EINVAL;
> +	}
> +
> +	link->request.test_link_rate = bp;
> +	DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +	bp &= DP_MAX_LANE_COUNT_MASK;
> +
> +	if (!is_lane_count_valid(bp)) {
> +		DRM_ERROR("invalid lane count = 0x%x\n", bp);
> +		return -EINVAL;
> +	}
> +
> +	link->request.test_lane_count = bp;
> +	DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
> +	return 0;
> +}
> +
> +/**
> + * dp_parse_phy_test_params() - parses the phy link parameters
> + * @link: Display Port Driver data
> + *
> + * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being
> + * requested.
> + */
> +static int dp_link_parse_phy_test_params(struct dp_link_private *link)
> +{
> +	u8 data;
> +	ssize_t rlen;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	link->dp_link.phy_params.phy_test_pattern_sel = data;
> +
> +	DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
> +
> +	switch (data) {
> +	case DP_LINK_QUAL_PATTERN_DISABLE:
> +	case DP_LINK_QUAL_PATTERN_D10_2:
> +	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> +	case DP_LINK_QUAL_PATTERN_PRBS7:
> +	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> +	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +/**
> + * dp_link_is_video_audio_test_requested() - checks for audio/video link request
> + * @link: link requested by the sink
> + *
> + * Returns true if the requested link is a permitted audio/video link.
> + */
> +static bool dp_link_is_video_audio_test_requested(u32 link)
> +{
> +	u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
> +				DP_TEST_LINK_AUDIO_PATTERN |
> +				DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> +
> +	return ((link & video_audio_test) &&
> +		!(link & ~video_audio_test));
> +}
> +
> +/**
> + * dp_link_parse_request() - parses link request parameters from sink
> + * @link: Display Port Driver data
> + *
> + * Parses the DPCD to check if an automated link is requested (Byte 0x201),
> + * and what type of link automation is being requested (Byte 0x218).
> + */
> +static int dp_link_parse_request(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +
> +	/**
> +	 * Read the device service IRQ vector (Byte 0x201) to determine
> +	 * whether an automated link has been requested by the sink.
> +	 */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> +				DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
> +
> +	if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
> +		DRM_DEBUG_DP("no test requested\n");
> +		return 0;
> +	}
> +
> +	/**
> +	 * Read the link request byte (Byte 0x218) to determine what type
> +	 * of automated link has been requested by the sink.
> +	 */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
> +		DRM_DEBUG_DP("link 0x%x not supported\n", data);
> +		goto end;
> +	}
> +
> +	DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
> +	link->request.test_requested = data;
> +
> +	if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		ret = dp_link_parse_phy_test_params(link);
> +		if (ret)
> +			goto end;
> +		ret = dp_link_parse_link_training_params(link);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
> +		ret = dp_link_parse_link_training_params(link);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	if (dp_link_is_video_audio_test_requested(
> +			link->request.test_requested)) {
> +		ret = dp_link_parse_video_pattern_params(link);
> +		if (ret)
> +			goto end;
> +
> +		ret = dp_link_parse_audio_pattern_params(link);
> +	}
> +end:
> +	/*
> +	 * Send a DP_TEST_ACK if all link parameters are valid, otherwise send
> +	 * a DP_TEST_NAK.
> +	 */
> +	if (ret) {
> +		link->dp_link.test_response = DP_TEST_NAK;
> +	} else {
> +		if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
> +			link->dp_link.test_response = DP_TEST_ACK;
> +		else
> +			link->dp_link.test_response =
> +				DP_TEST_EDID_CHECKSUM_WRITE;
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_parse_sink_count() - parses the sink count
> + *
> + * Parses the DPCD to check if there is an update to the sink count
> + * (Byte 0x200), and whether all the sink devices connected have Content
> + * Protection enabled.
> + */
> +static int dp_link_parse_sink_count(struct dp_link *dp_link)
> +{
> +	ssize_t rlen;
> +	bool cp_ready;
> +
> +	struct dp_link_private *link = container_of(dp_link,
> +			struct dp_link_private, dp_link);
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
> +				 &link->dp_link.sink_count);
> +	if (rlen < 0) {
> +		DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
> +
> +	link->dp_link.sink_count =
> +		DP_GET_SINK_COUNT(link->dp_link.sink_count);
> +
> +	DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
> +		link->dp_link.sink_count, cp_ready);
> +	return 0;
> +}
> +
> +static void dp_link_parse_sink_status_field(struct dp_link_private *link)
> +{
> +	int len = 0;
> +
> +	link->prev_sink_count = link->dp_link.sink_count;
> +	dp_link_parse_sink_count(&link->dp_link);
> +
> +	len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
> +		link->link_status);
> +	if (len < DP_LINK_STATUS_SIZE)
> +		DRM_ERROR("DP link status read failed\n");
> +	dp_link_parse_request(link);
> +}
> +
> +/**
> + * dp_link_process_link_training_request() - processes new training requests
> + * @link: Display Port link data
> + *
> + * This function will handle new link training requests that are initiated by
> + * the sink. In particular, it will update the requested lane count and link
> + * link rate, and then trigger the link retraining procedure.
> + *
> + * The function will return 0 if a link training request has been processed,
> + * otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_link_training_request(struct dp_link_private *link)
> +{
> +	if (link->request.test_requested != DP_TEST_LINK_TRAINING)
> +		return -EINVAL;
> +
> +	DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
> +			DP_TEST_LINK_TRAINING,
> +			link->request.test_link_rate,
> +			link->request.test_lane_count);
> +
> +	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> +	link->dp_link.link_params.rate = link->request.test_link_rate;
> +
> +	return 0;
> +}
> +
> +bool dp_link_send_test_response(struct dp_link *dp_link)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return false;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->test_response_mutex);
> +	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
> +			dp_link->test_response);
> +	mutex_unlock(&link->test_response_mutex);
> +
> +	return ret == 1;
> +}
> +
> +int dp_link_psm_config(struct dp_link *dp_link,
> +			      struct drm_dp_link *link_info, bool enable)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->psm_mutex);
> +	if (enable)
> +		ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
> +	else
> +		ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
> +
> +	if (ret)
> +		DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" : "exit");
> +	else
> +		dp_link->psm_enabled = enable;
> +
> +	mutex_unlock(&link->psm_mutex);
> +	return ret;
> +}
> +
> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return false;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM, checksum);
> +	return ret == 1;
> +}
> +
> +static int dp_link_parse_vx_px(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
> +		drm_dp_get_adjust_request_voltage(link->link_status, 0),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 1),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 2),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 3));
> +
> +	DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
> +
> +	/**
> +	 * Update the voltage and pre-emphasis levels as per DPCD request
> +	 * vector.
> +	 */
> +	DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
> +			link->dp_link.phy_params.v_level,
> +			link->dp_link.phy_params.p_level);
> +	link->dp_link.phy_params.v_level =
> +		drm_dp_get_adjust_request_voltage(link->link_status, 0);
> +	link->dp_link.phy_params.p_level =
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
> +	DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
> +			link->dp_link.phy_params.v_level,
> +			link->dp_link.phy_params.p_level);
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_process_phy_test_pattern_request() - process new phy link requests
> + * @link: Display Port Driver data
> + *
> + * This function will handle new phy link pattern requests that are initiated
> + * by the sink. The function will return 0 if a phy link pattern has been
> + * processed, otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_phy_test_pattern_request(
> +		struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) {
> +		DRM_DEBUG_DP("no phy test\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!is_link_rate_valid(link->request.test_link_rate) ||
> +		!is_lane_count_valid(link->request.test_lane_count)) {
> +		DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
> +			link->request.test_link_rate, link->request.test_lane_count);
> +		return -EINVAL;
> +	}
> +
> +	DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
> +			link->dp_link.link_params.rate,
> +			link->dp_link.link_params.num_lanes);
> +
> +	DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
> +			link->request.test_link_rate, link->request.test_lane_count);
> +
> +	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> +	link->dp_link.link_params.rate = link->request.test_link_rate;
> +
> +	ret = dp_link_parse_vx_px(link);
> +	if (ret)
> +		  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
> +
> +	return ret;
> +}
> +
> +static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
> +{
> +	return link_status[r - DP_LANE0_1_STATUS];
> +}
> +
> +/**
> + * dp_link_process_link_status_update() - processes link status updates
> + * @link: Display Port link module data
> + *
> + * This function will check for changes in the link status, e.g. clock
> + * recovery done on all lanes, and trigger link training if there is a
> + * failure/error on the link.
> + *
> + * The function will return 0 if the a link status update has been processed,
> + * otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_link_status_update(struct dp_link_private *link)
> +{
> +	if (!(get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
> +							DP_LINK_STATUS_UPDATED) ||
> +			(drm_dp_clock_recovery_ok(link->link_status,
> +					link->dp_link.link_params.num_lanes) &&
> +			drm_dp_channel_eq_ok(link->link_status,
> +					link->dp_link.link_params.num_lanes)))
> +		return -EINVAL;
> +
> +	DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
> +			drm_dp_clock_recovery_ok(link->link_status,
> +			link->dp_link.link_params.num_lanes),
> +			drm_dp_clock_recovery_ok(link->link_status,
> +			link->dp_link.link_params.num_lanes));
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_link_process_downstream_port_status_change() - process port status changes
> + * @link: Display Port Driver data
> + *
> + * This function will handle downstream port updates that are initiated by
> + * the sink. If the downstream port status has changed, the EDID is read via
> + * AUX.
> + *
> + * The function will return 0 if a downstream port update has been
> + * processed, otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_ds_port_status_change(struct dp_link_private *link)
> +{
> +	if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
> +					DP_DOWNSTREAM_PORT_STATUS_CHANGED)
> +		goto reset;
> +
> +	if (link->prev_sink_count == link->dp_link.sink_count)
> +		return -EINVAL;
> +
> +reset:
> +	/* reset prev_sink_count */
> +	link->prev_sink_count = link->dp_link.sink_count;
> +
> +	return 0;
> +}
> +
> +static bool dp_link_is_video_pattern_requested(struct dp_link_private *link)
> +{
> +	return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
> +		&& !(link->request.test_requested &
> +		DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> +}
> +
> +static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link)
> +{
> +	return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
> +}
> +
> +static void dp_link_reset_data(struct dp_link_private *link)
> +{
> +	link->request = (const struct dp_link_request){ 0 };
> +	link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
> +	link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
> +	link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
> +	link->dp_link.phy_params.phy_test_pattern_sel = 0;
> +	link->dp_link.sink_request = 0;
> +	link->dp_link.test_response = 0;
> +}
> +
> +/**
> + * dp_link_process_request() - handle HPD IRQ transition to HIGH
> + * @link: pointer to link module data
> + *
> + * This function will handle the HPD IRQ state transitions from LOW to HIGH
> + * (including cases when there are back to back HPD IRQ HIGH) indicating
> + * the start of a new link training request or sink status update.
> + */
> +int dp_link_process_request(struct dp_link *dp_link)
> +{
> +	int ret = 0;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->test_response_mutex);
> +	dp_link_reset_data(link);
> +
> +	dp_link_parse_sink_status_field(link);
> +	mutex_unlock(&link->test_response_mutex);
> +
> +	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
> +		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_ds_port_status_change(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_link_training_request(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_TEST_LINK_TRAINING;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_phy_test_pattern_request(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_link_status_update(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
> +		return ret;
> +	}
> +
> +	if (dp_link_is_video_pattern_requested(link)) {
> +		dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
> +		return -EINVAL;
> +	}
> +
> +	if (dp_link_is_audio_pattern_requested(link)) {
> +		dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +int dp_link_get_colorimetry_config(struct dp_link *dp_link)
> +{
> +	u32 cc;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	/*
> +	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
> +	 * Only RGB_VESA and RGB_CEA supported for now
> +	 */
> +	if (dp_link_is_video_pattern_requested(link))
> +		cc = link->dp_link.test_video.test_dyn_range;
> +	else
> +		cc = DP_TEST_DYNAMIC_RANGE_VESA;
> +
> +	return cc;
> +}
> +
> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
> +{
> +	int i;
> +	int v_max = 0, p_max = 0;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	/* use the max level across lanes */
> +	for (i = 0; i < dp_link->link_params.num_lanes; i++) {
> +		u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
> +		u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
> +		DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
> +							i, data_v, data_p);
> +		if (v_max < data_v)
> +			v_max = data_v;
> +		if (p_max < data_p)
> +			p_max = data_p;
> +	}
> +
> +	dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
> +	dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
> +
> +	/**
> +	 * Adjust the voltage swing and pre-emphasis level combination to within
> +	 * the allowable range.
> +	 */
> +	if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +		DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
> +			dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
> +		dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
> +	}
> +
> +	if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
> +		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> +			dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
> +		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
> +	}
> +
> +	if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
> +		&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
> +		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> +			dp_link->phy_params.p_level,
> +			DP_TRAIN_PRE_EMPHASIS_LVL_1);
> +		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
> +	}
> +
> +	DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
> +		dp_link->phy_params.v_level, dp_link->phy_params.p_level);
> +
> +	return 0;
> +}
> +
> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
> +{
> +	u32 tbd;
> +
> +	/*
> +	 * Few simplistic rules and assumptions made here:
> +	 *    1. Test bit depth is bit depth per color component
> +	 *    2. Assume 3 color components
> +	 */
> +	switch (bpp) {
> +	case 18:
> +		tbd = DP_TEST_BIT_DEPTH_6;
> +		break;
> +	case 24:
> +		tbd = DP_TEST_BIT_DEPTH_8;
> +		break;
> +	case 30:
> +		tbd = DP_TEST_BIT_DEPTH_10;
> +		break;
> +	default:
> +		tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
> +		break;
> +	}
> +
> +	if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
> +		tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
> +
> +	return tbd;
> +}
> +
> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
> +{
> +	int rc = 0;
> +	struct dp_link_private *link;
> +	struct dp_link *dp_link;
> +
> +	if (!dev || !aux) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
> +	if (!link) {
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	link->dev   = dev;
> +	link->aux   = aux;
> +
> +	mutex_init(&link->test_response_mutex);
> +	mutex_init(&link->psm_mutex);
> +	dp_link = &link->dp_link;
> +
> +	return dp_link;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_link_put(struct dp_link *dp_link)
> +{
> +	struct dp_link_private *link;
> +
> +	if (!dp_link)
> +		return;
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	devm_kfree(link->dev, link);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
> new file mode 100644
> index 0000000..607904b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_LINK_H_
> +#define _DP_LINK_H_
> +
> +#include "dp_aux.h"
> +
> +#define DS_PORT_STATUS_CHANGED 0x200
> +#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
> +
> +enum dp_link_voltage_level {
> +	DP_TRAIN_VOLTAGE_SWING_LVL_0	= 0,
> +	DP_TRAIN_VOLTAGE_SWING_LVL_1	= 1,
> +	DP_TRAIN_VOLTAGE_SWING_LVL_2	= 2,
> +	DP_TRAIN_VOLTAGE_SWING_MAX	= DP_TRAIN_VOLTAGE_SWING_LVL_2,
> +};
> +
> +enum dp_link_preemaphasis_level {
> +	DP_TRAIN_PRE_EMPHASIS_LVL_0	= 0,
> +	DP_TRAIN_PRE_EMPHASIS_LVL_1	= 1,
> +	DP_TRAIN_PRE_EMPHASIS_LVL_2	= 2,
> +	DP_TRAIN_PRE_EMPHASIS_MAX	= DP_TRAIN_PRE_EMPHASIS_LVL_2,
> +};
> +
> +struct dp_link_test_video {
> +	u32 test_video_pattern;
> +	u32 test_bit_depth;
> +	u32 test_dyn_range;
> +	u32 test_h_total;
> +	u32 test_v_total;
> +	u32 test_h_start;
> +	u32 test_v_start;
> +	u32 test_hsync_pol;
> +	u32 test_hsync_width;
> +	u32 test_vsync_pol;
> +	u32 test_vsync_width;
> +	u32 test_h_width;
> +	u32 test_v_height;
> +	u32 test_rr_d;
> +	u32 test_rr_n;
> +};
> +
> +struct dp_link_test_audio {
> +	u32 test_audio_sampling_rate;
> +	u32 test_audio_channel_count;
> +	u32 test_audio_pattern_type;
> +	u32 test_audio_period_ch_1;
> +	u32 test_audio_period_ch_2;
> +	u32 test_audio_period_ch_3;
> +	u32 test_audio_period_ch_4;
> +	u32 test_audio_period_ch_5;
> +	u32 test_audio_period_ch_6;
> +	u32 test_audio_period_ch_7;
> +	u32 test_audio_period_ch_8;
> +};
> +
> +struct dp_link_phy_params {
> +	u32 phy_test_pattern_sel;
> +	u8 v_level;
> +	u8 p_level;
> +};
> +
> +struct dp_link {
> +	u32 sink_request;
> +	u32 test_response;
> +	bool psm_enabled;
> +
> +	u8 sink_count;
> +	struct dp_link_test_video test_video;
> +	struct dp_link_test_audio test_audio;
> +	struct dp_link_phy_params phy_params;
> +	struct drm_dp_link link_params;
> +};
> +
> +/**
> + * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
> + * @tbd: test bit depth
> + *
> + * Returns the bits per pixel (bpp) to be used corresponding to the
> + * git bit depth value. This function assumes that bit depth has
> + * already been validated.
> + */
> +static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
> +{
> +	/*
> +	 * Few simplistic rules and assumptions made here:
> +	 *    1. Bit depth is per color component
> +	 *    2. If bit depth is unknown return 0
> +	 *    3. Assume 3 color components
> +	 */
> +	switch (tbd) {
> +	case DP_TEST_BIT_DEPTH_6:
> +		return 18;
> +	case DP_TEST_BIT_DEPTH_8:
> +		return 24;
> +	case DP_TEST_BIT_DEPTH_10:
> +		return 30;
> +	case DP_TEST_BIT_DEPTH_UNKNOWN:
> +	default:
> +		return 0;
> +	}
> +}
> +
> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
> +int dp_link_process_request(struct dp_link *dp_link);
> +int dp_link_get_colorimetry_config(struct dp_link *dp_link);
> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
> +bool dp_link_send_test_response(struct dp_link *dp_link);
> +int dp_link_psm_config(struct dp_link *dp_link,
> +		struct drm_dp_link *link_info, bool enable);
> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum);
> +
> +/**
> + * dp_link_get() - get the functionalities of dp test module
> + *
> + *
> + * return: a pointer to dp_link struct
> + */
> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
> +
> +/**
> + * dp_link_put() - releases the dp test module's resources
> + *
> + * @dp_link: an instance of dp_link module
> + *
> + */
> +void dp_link_put(struct dp_link *dp_link);
> +
> +#endif /* _DP_LINK_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> new file mode 100644
> index 0000000..a3150f4
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -0,0 +1,450 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include "dp_panel.h"
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_edid.h>
> +
> +#define DP_MAX_DS_PORT_COUNT 1
> +
> +struct dp_panel_private {
> +	struct device *dev;
> +	struct dp_panel dp_panel;
> +	struct dp_aux *aux;
> +	struct dp_link *link;
> +	struct dp_catalog *catalog;
> +	bool panel_on;
> +	bool aux_cfg_update_done;
> +};
> +
> +static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	size_t rlen;
> +	struct dp_panel_private *panel;
> +	struct drm_dp_link *link_info;
> +	u8 *dpcd, major = 0, minor = 0;
> +	u32 dfp_count = 0;
> +
> +	dpcd = dp_panel->dpcd;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	link_info = &dp_panel->link_info;
> +	rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
> +	if (rc < 0) {
> +		DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
> +		return rc;
> +	}
> +	major = (link_info->revision >> 4) & 0x0f;
> +	minor = link_info->revision & 0x0f;
> +	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> +	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> +	DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> +
> +	rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
> +		dpcd, (DP_RECEIVER_CAP_SIZE + 1));
> +	if (rlen < 0) {
> +		DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
> +		return -EINVAL;
> +	}
> +
> +	dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
> +						DP_DOWN_STREAM_PORT_COUNT;
> +	if (dfp_count > DP_MAX_DS_PORT_COUNT) {
> +		DRM_ERROR("DS port count %d greater that max (%d) supported\n",
> +			dfp_count, DP_MAX_DS_PORT_COUNT);
> +		return -EINVAL;
> +	}
> +	return rc;
> +}
> +
> +static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
> +		u32 mode_edid_bpp, u32 mode_pclk_khz)
> +{
> +	struct drm_dp_link *link_info;
> +	const u32 max_supported_bpp = 30, min_supported_bpp = 18;
> +	u32 bpp = 0, data_rate_khz = 0;
> +
> +	bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
> +
> +	link_info = &dp_panel->link_info;
> +	data_rate_khz = link_info->num_lanes * link_info->rate * 8;
> +
> +	while (bpp > min_supported_bpp) {
> +		if (mode_pclk_khz * bpp <= data_rate_khz)
> +			break;
> +		bpp -= 6;
> +	}
> +
> +	return bpp;
> +}
> +
> +static void dp_panel_set_test_mode(struct dp_panel_private *panel,
> +		struct dp_display_mode *mode)
> +{
> +	struct drm_display_mode *drm_mode = NULL;
> +	struct dp_link_test_video *test_info = NULL;
> +
> +	drm_mode = &mode->drm_mode;
> +	test_info = &panel->link->test_video;
> +
> +	drm_mode->hdisplay = test_info->test_h_width;
> +	drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total -
> +			(test_info->test_h_start + test_info->test_h_width);
> +	drm_mode->hsync_end = drm_mode->hsync_start + test_info->test_hsync_width;
> +	drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
> +						test_info->test_hsync_width;
> +
> +	drm_mode->vdisplay = test_info->test_v_height;
> +	drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total -
> +			(test_info->test_v_start + test_info->test_v_height);
> +	drm_mode->vsync_end = drm_mode->vsync_start + test_info->test_vsync_width;
> +	drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
> +						test_info->test_vsync_width;
> +
> +	drm_mode->vrefresh = test_info->test_rr_n;
> +	drm_mode->clock = test_info->test_h_total *
> +		test_info->test_v_total * drm_mode->vrefresh;
> +
> +	drm_mode->type = 0x48;
> +	drm_mode_set_name(drm_mode);
> +
> +	if (test_info->test_rr_d == 0)
> +		drm_mode->clock /= 1000;
> +	else
> +		drm_mode->clock /= 1001;
> +
> +	if (test_info->test_h_width == 640)
> +		drm_mode->clock = 25170;
> +}
> +
> +static int dp_panel_update_modes(struct drm_connector *connector,
> +	struct edid *edid)
> +{
> +	int rc = 0;
> +
> +	if (edid) {
> +		rc = drm_connector_update_edid_property(connector, edid);
> +		if (rc) {
> +			DRM_ERROR("failed to update edid property %d\n", rc);
> +			return rc;
> +		}
> +		rc = drm_add_edid_modes(connector, edid);
> +		DRM_DEBUG_DP("%s -", __func__);
> +		return rc;
> +	}
> +
> +	rc = drm_connector_update_edid_property(connector, NULL);
> +	if (rc)
> +		DRM_ERROR("failed to update edid property %d\n", rc);
> +
> +	return rc;
> +}
> +
> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> +	struct drm_connector *connector)
> +{
> +	int rc = 0, bw_code;
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel || !connector) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	rc = dp_panel_read_dpcd(dp_panel);
> +	bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> +	if (rc || !is_link_rate_valid(bw_code) ||
> +			!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> +			(bw_code > dp_panel->max_bw_code)) {
> +		DRM_ERROR("read dpcd failed %d\n", rc);
> +		return rc;
> +	}
> +	rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
> +			      drm_dp_is_branch(dp_panel->dpcd));
> +	if (rc) {
> +		DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
> +		return rc;
> +	}
> +
> +
> +	kfree(dp_panel->edid);
> +	dp_panel->edid = drm_get_edid(connector,
> +					      &panel->aux->drm_aux->ddc);
> +	if (!dp_panel->edid) {
> +		DRM_ERROR("panel edid read failed\n");
> +		return -EINVAL;
> +	}
> +
> +	if (panel->aux_cfg_update_done) {
> +		DRM_DEBUG_DP("read DPCD with updated AUX config\n");
> +		rc = dp_panel_read_dpcd(dp_panel);
> +		bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> +		if (rc || !is_link_rate_valid(bw_code) ||
> +				!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> +				(bw_code > dp_panel->max_bw_code)) {
> +			DRM_ERROR("read dpcd failed %d\n", rc);
> +			return rc;
> +		}
> +		panel->aux_cfg_update_done = false;
> +	}
> +
> +	return 0;
> +}
> +
> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
> +		u32 mode_edid_bpp, u32 mode_pclk_khz)
> +{
> +	struct dp_panel_private *panel;
> +	u32 bpp = mode_edid_bpp;
> +
> +	if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
> +		DRM_ERROR("invalid input\n");
> +		return 0;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (dp_panel->video_test)
> +		bpp = dp_link_bit_depth_to_bpp(
> +				panel->link->test_video.test_bit_depth);
> +	else
> +		bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
> +				mode_pclk_khz);
> +
> +	return bpp;
> +}
> +
> +int dp_panel_get_modes(struct dp_panel *dp_panel,
> +	struct drm_connector *connector, struct dp_display_mode *mode)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (dp_panel->video_test) {
> +		dp_panel_set_test_mode(panel, mode);
> +		return 1;
> +	} else if (dp_panel->edid) {
> +		return dp_panel_update_modes(connector, dp_panel->edid);
> +	}
> +
> +	return 0;
> +}
> +
> +u8 dp_panel_get_edid_checksum(struct edid *edid)
> +{
> +	struct edid *last_block;
> +	u8 *raw_edid;
> +	bool is_edid_corrupt;
> +
> +	if (!edid) {
> +		DRM_ERROR("invalid edid input\n");
> +		return 0;
> +	}
> +
> +	raw_edid = (u8 *)edid;
> +	raw_edid += (edid->extensions * EDID_LENGTH);
> +	last_block = (struct edid *)raw_edid;
> +
> +	/* block type extension */
> +	drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
> +	if (!is_edid_corrupt)
> +		return last_block->checksum;
> +
> +	DRM_ERROR("Invalid block, no checksum\n");
> +	return 0;
> +}
> +
> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
> +		u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
> +
> +		dp_link_send_edid_checksum(panel->link, checksum);
> +		dp_link_send_test_response(panel->link);
> +	}
> +}
> +
> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
> +{
> +	struct dp_catalog *catalog;
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	catalog = panel->catalog;
> +
> +	if (!panel->panel_on) {
> +		DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
> +		return;
> +	}
> +
> +	if (!enable) {
> +		dp_catalog_panel_tpg_disable(catalog);
> +		return;
> +	}
> +
> +	DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
> +	dp_catalog_panel_tpg_enable(catalog, &panel->dp_panel.dp_mode.drm_mode);
> +}
> +
> +int dp_panel_timing_cfg(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	u32 data, total_ver, total_hor;
> +	struct dp_catalog *catalog;
> +	struct dp_panel_private *panel;
> +	struct drm_display_mode *drm_mode;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	catalog = panel->catalog;
> +	drm_mode = &panel->dp_panel.dp_mode.drm_mode;
> +
> +	DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
> +		drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
> +		drm_mode->hsync_start - drm_mode->hdisplay,
> +		drm_mode->hsync_end - drm_mode->hsync_start);
> +
> +	DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
> +		drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
> +		drm_mode->vsync_start - drm_mode->vdisplay,
> +		drm_mode->vsync_end - drm_mode->vsync_start);
> +
> +	total_hor = drm_mode->htotal;
> +
> +	total_ver = drm_mode->vtotal;
> +
> +	data = total_ver;
> +	data <<= 16;
> +	data |= total_hor;
> +
> +	catalog->total = data;
> +
> +	data = (drm_mode->vtotal - drm_mode->vsync_start);
> +	data <<= 16;
> +	data |= (drm_mode->htotal - drm_mode->hsync_start);
> +
> +	catalog->sync_start = data;
> +
> +	data = drm_mode->vsync_end - drm_mode->vsync_start;
> +	data <<= 16;
> +	data |= (panel->dp_panel.dp_mode.v_active_low << 31);
> +	data |= drm_mode->hsync_end - drm_mode->hsync_start;
> +	data |= (panel->dp_panel.dp_mode.h_active_low << 15);
> +
> +	catalog->width_blanking = data;
> +
> +	data = drm_mode->vdisplay;
> +	data <<= 16;
> +	data |= drm_mode->hdisplay;
> +
> +	catalog->dp_active = data;
> +
> +	dp_catalog_panel_timing_cfg(catalog);
> +	panel->panel_on = true;
> +
> +	return rc;
> +}
> +
> +int dp_panel_init_panel_info(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	struct drm_display_mode *drm_mode;
> +
> +	drm_mode = &dp_panel->dp_mode.drm_mode;
> +
> +	/*
> +	 * print resolution info as this is a result
> +	 * of user initiated action of cable connection
> +	 */
> +	DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
> +	DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
> +		drm_mode->vdisplay, drm_mode->vrefresh);
> +	DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
> +			drm_mode->htotal - drm_mode->hsync_end,
> +			drm_mode->hsync_start - drm_mode->hdisplay,
> +			drm_mode->hsync_end - drm_mode->hsync_start);
> +	DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
> +			drm_mode->vtotal - drm_mode->vsync_end,
> +			drm_mode->vsync_start - drm_mode->vdisplay,
> +			drm_mode->vsync_end - drm_mode->vsync_start);
> +	DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
> +	DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
> +
> +	dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32, dp_panel->dp_mode.bpp, 30));
> +	DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
> +
> +	return rc;
> +}
> +
> +struct dp_panel *dp_panel_get(struct dp_panel_in *in)
> +{
> +	int rc = 0;
> +	struct dp_panel_private *panel;
> +	struct dp_panel *dp_panel;
> +
> +	if (!in->dev || !in->catalog || !in->aux || !in->link) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
> +	if (!panel) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	panel->dev = in->dev;
> +	panel->aux = in->aux;
> +	panel->catalog = in->catalog;
> +	panel->link = in->link;
> +
> +	dp_panel = &panel->dp_panel;
> +	dp_panel->max_bw_code = DP_LINK_BW_8_1;
> +	panel->aux_cfg_update_done = false;
> +
> +	return dp_panel;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_panel_put(struct dp_panel *dp_panel)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel)
> +		return;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	kfree(dp_panel->edid);
> +	dp_panel->edid = NULL;
> +	devm_kfree(panel->dev, panel);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
> new file mode 100644
> index 0000000..68c5650
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_PANEL_H_
> +#define _DP_PANEL_H_
> +
> +#include <drm/msm_drm.h>
> +
> +#include "dp_aux.h"
> +#include "dp_link.h"
> +#include "dp_extcon.h"
> +
> +struct edid;
> +
> +#define DP_MAX_DOWNSTREAM_PORTS 0x10
> +
> +struct dp_display_mode {
> +	struct drm_display_mode drm_mode;
> +	u32 capabilities;
> +	u32 bpp;
> +	u32 h_active_low;
> +	u32 v_active_low;
> +};
> +
> +struct dp_panel_in {
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_link *link;
> +	struct dp_catalog *catalog;
> +};
> +
> +struct dp_panel {
> +	/* dpcd raw data */
> +	u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
> +
> +	struct drm_dp_link link_info;
> +	struct drm_dp_desc desc;
> +	struct edid *edid;
> +	struct drm_connector *connector;
> +	struct dp_display_mode dp_mode;
> +	bool video_test;
> +
> +	u32 vic;
> +	u32 max_pclk_khz;
> +
> +	u32 max_bw_code;
> +};
> +
> +int dp_panel_init_panel_info(struct dp_panel *dp_panel);
> +int dp_panel_deinit(struct dp_panel *dp_panel);
> +int dp_panel_timing_cfg(struct dp_panel *dp_panel);
> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> +		struct drm_connector *connector);
> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 mode_max_bpp,
> +			u32 mode_pclk_khz);
> +int dp_panel_get_modes(struct dp_panel *dp_panel,
> +		struct drm_connector *connector, struct dp_display_mode *mode);
> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
> +
> +/**
> + * is_link_rate_valid() - validates the link rate
> + * @lane_rate: link rate requested by the sink
> + *
> + * Returns true if the requested link rate is supported.
> + */
> +static inline bool is_link_rate_valid(u32 bw_code)
> +{
> +	return (bw_code == DP_LINK_BW_1_62 ||
> +		bw_code == DP_LINK_BW_2_7 ||
> +		bw_code == DP_LINK_BW_5_4 ||
> +		bw_code == DP_LINK_BW_8_1);
> +}
> +
> +/**
> + * dp_link_is_lane_count_valid() - validates the lane count
> + * @lane_count: lane count requested by the sink
> + *
> + * Returns true if the requested lane count is supported.
> + */
> +static inline bool is_lane_count_valid(u32 lane_count)
> +{
> +	return (lane_count == 1 ||
> +		lane_count == 2 ||
> +		lane_count == 4);
> +}
> +
> +struct dp_panel *dp_panel_get(struct dp_panel_in *in);
> +void dp_panel_put(struct dp_panel *dp_panel);
> +#endif /* _DP_PANEL_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
> new file mode 100644
> index 0000000..3fa2a1f
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> @@ -0,0 +1,496 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/of_gpio.h>
> +
> +#include "dp_parser.h"
> +
> +static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
> +	.num = 2,
> +	.regs = {
> +		{"vdda-1p2", 21800, 4 },	/* 1.2 V */
> +		{"vdda-0p9", 36000, 32 },	/* 0.9 V */
> +	},
> +};
> +
> +static int msm_dss_ioremap_byname(struct platform_device *pdev,
> +			   struct dss_io_data *io_data, const char *name)
> +{
> +	struct resource *res = NULL;
> +
> +	if (!io_data) {
> +		DRM_ERROR("%pS->%s: invalid input\n",
> +			__builtin_return_address(0), __func__);
> +		return -EINVAL;
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
> +	if (!res) {
> +		DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
> +			__builtin_return_address(0), __func__, name);
> +		return -ENODEV;
> +	}
> +
> +	io_data->len = (u32)resource_size(res);
> +	io_data->base = ioremap(res->start, io_data->len);
> +	if (!io_data->base) {
> +		DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
> +			__builtin_return_address(0), __func__, name);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static void msm_dss_iounmap(struct dss_io_data *io_data)
> +{
> +	if (!io_data) {
> +		DRM_ERROR("%pS->%s: invalid input\n",
> +			__builtin_return_address(0), __func__);
> +		return;
> +	}
> +
> +	if (io_data->base) {
> +		iounmap(io_data->base);
> +		io_data->base = NULL;
> +	}
> +	io_data->len = 0;
> +}
> +
> +static void dp_parser_unmap_io_resources(struct dp_parser *parser)
> +{
> +	struct dp_io *io = &parser->io;
> +
> +	msm_dss_iounmap(&io->dp_ahb);
> +	msm_dss_iounmap(&io->dp_aux);
> +	msm_dss_iounmap(&io->dp_link);
> +	msm_dss_iounmap(&io->dp_p0);
> +	msm_dss_iounmap(&io->phy_io);
> +	msm_dss_iounmap(&io->ln_tx0_io);
> +	msm_dss_iounmap(&io->ln_tx0_io);
> +	msm_dss_iounmap(&io->dp_pll_io);
> +	msm_dss_iounmap(&io->dp_cc_io);
> +	msm_dss_iounmap(&io->usb3_dp_com);
> +	msm_dss_iounmap(&io->qfprom_io);
> +}
> +
> +static int dp_parser_ctrl_res(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	u32 index;
> +	struct platform_device *pdev = parser->pdev;
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +	struct dp_io *io = &parser->io;
> +
> +	rc = of_property_read_u32(of_node, "cell-index", &index);
> +	if (rc) {
> +		DRM_ERROR("cell-index not specified, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
> +	if (rc) {
> +		DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
> +	if (rc) {
> +		DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp MMSS_CC resources\n");
> +		goto err;
> +	}
> +
> +	if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
> +		pr_warn("unable to remap dp qfprom resources\n");
> +
> +	return 0;
> +err:
> +	dp_parser_unmap_io_resources(parser);
> +	return rc;
> +}
> +
> +static const char *dp_get_phy_aux_config_property(u32 cfg_type)
> +{
> +	switch (cfg_type) {
> +	case PHY_AUX_CFG0:
> +		return "qcom,aux-cfg0-settings";
> +	case PHY_AUX_CFG1:
> +		return "qcom,aux-cfg1-settings";
> +	case PHY_AUX_CFG2:
> +		return "qcom,aux-cfg2-settings";
> +	case PHY_AUX_CFG3:
> +		return "qcom,aux-cfg3-settings";
> +	case PHY_AUX_CFG4:
> +		return "qcom,aux-cfg4-settings";
> +	case PHY_AUX_CFG5:
> +		return "qcom,aux-cfg5-settings";
> +	case PHY_AUX_CFG6:
> +		return "qcom,aux-cfg6-settings";
> +	case PHY_AUX_CFG7:
> +		return "qcom,aux-cfg7-settings";
> +	case PHY_AUX_CFG8:
> +		return "qcom,aux-cfg8-settings";
> +	case PHY_AUX_CFG9:
> +		return "qcom,aux-cfg9-settings";
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +static int dp_parser_aux(struct dp_parser *parser)
> +{
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +	int len = 0, i = 0, j = 0, config_count = 0;
> +	const char *data;
> +
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		const char *property = dp_get_phy_aux_config_property(i);
> +
> +		data = of_get_property(of_node, property, &len);
> +		if (!data) {
> +			DRM_ERROR("Unable to read %s\n", property);
> +			goto error;
> +		}
> +
> +		config_count = len - 1;
> +		if (config_count < 1 || /* minimum config count = 1 */
> +			config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
> +			DRM_ERROR("Invalid config count (%d) configs for %s\n",
> +					config_count, property);
> +			goto error;
> +		}
> +
> +		parser->aux_cfg[i].offset = data[0];
> +		parser->aux_cfg[i].cfg_cnt = config_count;
> +		DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
> +				property,
> +				parser->aux_cfg[i].offset,
> +				parser->aux_cfg[i].cfg_cnt);
> +		for (j = 1; j < len; j++) {
> +			parser->aux_cfg[i].lut[j - 1] = data[j];
> +			DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
> +					property,
> +					i,
> +					parser->aux_cfg[i].lut[j - 1]);
> +		}
> +	}
> +		return 0;
> +
> +error:
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
> +	}
> +	return -EINVAL;
> +}
> +
> +static int dp_parser_misc(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +
> +	rc = of_property_read_u32(of_node,
> +		"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
> +	if (rc)
> +		parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
> +
> +	return 0;
> +}
> +
> +static int dp_parser_pinctrl(struct dp_parser *parser)
> +{
> +	struct dp_pinctrl *pinctrl = &parser->pinctrl;
> +
> +	pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
> +
> +	if (IS_ERR_OR_NULL(pinctrl->pin)) {
> +		DRM_ERROR("failed to get pinctrl, rc=%d\n",
> +					PTR_ERR_OR_ZERO(pinctrl->pin));
> +		return -EINVAL;
> +	}
> +
> +	pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
> +					"mdss_dp_active");
> +	if (IS_ERR_OR_NULL(pinctrl->state_active)) {
> +		DRM_ERROR("failed to get pinctrl active state, %d\n",
> +			PTR_ERR_OR_ZERO(pinctrl->state_active));
> +		return -EINVAL;
> +	}
> +
> +	pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
> +					"mdss_dp_sleep");
> +	if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
> +		DRM_ERROR("failed to get pinctrl suspend state, %d\n",
> +			PTR_ERR_OR_ZERO(pinctrl->state_suspend));
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_parser_gpio(struct dp_parser *parser)
> +{
> +	struct device *dev = &parser->pdev->dev;
> +	struct device_node *of_node = dev->of_node;
> +
> +	parser->usbplug_cc_gpio = of_get_named_gpio(of_node, "qcom,usbplug-cc-gpio", 0);
> +	if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
> +			DRM_ERROR("usbplug-cc-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio", 0);
> +	if (!gpio_is_valid(parser->aux_en_gpio)) {
> +			DRM_ERROR("aux-en-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	parser->aux_sel_gpio = of_get_named_gpio(of_node, "qcom,aux-sel-gpio", 0);
> +	if (!gpio_is_valid(parser->aux_sel_gpio)) {
> +			DRM_ERROR("aux-sel-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static inline bool dp_parser_check_prefix(const char *clk_prefix, const char *clk_name)
> +{
> +	return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
> +}
> +
> +static int dp_parser_init_clk_data(struct dp_parser *parser)
> +{
> +	int num_clk = 0, i = 0, rc = 0;
> +	int core_clk_count = 0, ctrl_clk_count = 0;
> +	const char *clk_name;
> +	struct device *dev = &parser->pdev->dev;
> +	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> +	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	num_clk = of_property_count_strings(dev->of_node, "clock-names");
> +	if (num_clk <= 0) {
> +		DRM_ERROR("no clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < num_clk; i++) {
> +		rc = of_property_read_string_index(dev->of_node,
> +				"clock-names", i, &clk_name);
> +		if (rc) {
> +			DRM_ERROR("error reading clock-names %d\n", rc);
> +			return rc;
> +		}
> +
> +		if (dp_parser_check_prefix("core", clk_name))
> +			core_clk_count++;
> +
> +		if (dp_parser_check_prefix("ctrl", clk_name))
> +			ctrl_clk_count++;
> +	}
> +
> +	/* Initialize the CORE power module */
> +	if (core_clk_count == 0) {
> +		DRM_ERROR("no core clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	core_power->num_clk = core_clk_count;
> +	core_power->clk_config = devm_kzalloc(dev,
> +			sizeof(struct dss_clk) * core_power->num_clk,
> +			GFP_KERNEL);
> +	if (!core_power->clk_config) {
> +		return -EINVAL;
> +	}
> +
> +	/* Initialize the CTRL power module */
> +	if (ctrl_clk_count == 0) {
> +		DRM_ERROR("no ctrl clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	ctrl_power->num_clk = ctrl_clk_count;
> +	ctrl_power->clk_config = devm_kzalloc(dev,
> +			sizeof(struct dss_clk) * ctrl_power->num_clk,
> +			GFP_KERNEL);
> +	if (!ctrl_power->clk_config) {
> +		ctrl_power->num_clk = 0;
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_parser_clock(struct dp_parser *parser)
> +{
> +	int rc = 0, i = 0;
> +	int num_clk = 0;
> +	int core_clk_index = 0, ctrl_clk_index = 0;
> +	int core_clk_count = 0, ctrl_clk_count = 0;
> +	const char *clk_name;
> +	struct device *dev = &parser->pdev->dev;
> +	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> +	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	core_power = &parser->mp[DP_CORE_PM];
> +	ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	rc =  dp_parser_init_clk_data(parser);
> +	if (rc) {
> +		DRM_ERROR("failed to initialize power data %d\n", rc);
> +		return -EINVAL;
> +	}
> +
> +	core_clk_count = core_power->num_clk;
> +	ctrl_clk_count = ctrl_power->num_clk;
> +
> +	num_clk = core_clk_count + ctrl_clk_count;
> +
> +	for (i = 0; i < num_clk; i++) {
> +		rc = of_property_read_string_index(dev->of_node, "clock-names",
> +				i, &clk_name);
> +		if (rc) {
> +			 DRM_ERROR("error reading clock-names %d\n", rc);
> +			return rc;
> +		}
> +		if (dp_parser_check_prefix("core", clk_name) &&
> +				core_clk_index < core_clk_count) {
> +			struct dss_clk *clk =
> +				&core_power->clk_config[core_clk_index];
> +			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> +			clk->type = DSS_CLK_AHB;
> +			core_clk_index++;
> +		} else if (dp_parser_check_prefix("ctrl", clk_name) &&
> +			   ctrl_clk_index < ctrl_clk_count) {
> +			struct dss_clk *clk =
> +				&ctrl_power->clk_config[ctrl_clk_index];
> +			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> +			ctrl_clk_index++;
> +
> +			if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
> +			  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
> +				clk->type = DSS_CLK_PCLK;
> +			else
> +				clk->type = DSS_CLK_AHB;
> +		}
> +	}
> +
> +	DRM_DEBUG_DP("clock parsing successful\n");
> +
> +	return 0;
> +}
> +
> +static int dp_parser_parse(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +
> +	if (!parser) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Default: We assume that PHY is shared between USB and DP (Combo phy) */
> +	parser->combo_phy_en = true;
> +
> +	rc = dp_parser_ctrl_res(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_aux(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_misc(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_clock(parser);
> +	if (rc)
> +		return rc;
> +
> +	/* Map the corresponding regulator information according to
> +	 * version. Currently, since we only have one supported platform,
> +	 * mapping the regulator directly.
> +	 */
> +	parser->regulator_cfg = &sdm845_dp_reg_cfg;
> +
> +	rc = dp_parser_gpio(parser);
> +	if (rc) {
> +		DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is disabled\n");
> +		parser->combo_phy_en = false;
> +		return rc;
> +	}
> +
> +	rc = dp_parser_pinctrl(parser);
> +	return rc;
> +}
> +
> +struct dp_parser *dp_parser_get(struct platform_device *pdev)
> +{
> +	struct dp_parser *parser;
> +
> +	parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
> +	if (!parser)
> +		return ERR_PTR(-ENOMEM);
> +
> +	parser->parse = dp_parser_parse;
> +	parser->pdev = pdev;
> +
> +	return parser;
> +}
> +
> +void dp_parser_put(struct dp_parser *parser)
> +{
> +
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
> new file mode 100644
> index 0000000..b606b40
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
> @@ -0,0 +1,222 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_PARSER_H_
> +#define _DP_PARSER_H_
> +
> +#define DP_LABEL "MDSS DP DISPLAY"
> +#define AUX_CFG_LEN	10
> +#define DP_MAX_PIXEL_CLK_KHZ	675000
> +
> +enum dp_pm_type {
> +	DP_CORE_PM,
> +	DP_CTRL_PM,
> +	DP_PHY_PM,
> +	DP_MAX_PM
> +};
> +
> +struct dss_io_data {
> +	u32 len;
> +	void __iomem *base;
> +};
> +
> +static inline const char *dp_parser_pm_name(enum dp_pm_type module)
> +{
> +	switch (module) {
> +	case DP_CORE_PM:	return "DP_CORE_PM";
> +	case DP_CTRL_PM:	return "DP_CTRL_PM";
> +	case DP_PHY_PM:		return "DP_PHY_PM";
> +	default:		return "???";
> +	}
> +}
> +
> +/**
> + * struct dp_display_data  - display related device tree data.
> + *
> + * @ctrl_node: referece to controller device
> + * @phy_node:  reference to phy device
> + * @is_active: is the controller currently active
> + * @name: name of the display
> + * @display_type: type of the display
> + */
> +struct dp_display_data {
> +	struct device_node *ctrl_node;
> +	struct device_node *phy_node;
> +	bool is_active;
> +	const char *name;
> +	const char *display_type;
> +};
> +
> +/**
> + * struct dp_ctrl_resource - controller's IO related data
> + *
> + * @dp_ahb: controller's ahb mapped memory address
> + * @dp_aux: controller's aux mapped memory address
> + * @dp_link: controller's link mapped memory address
> + * @dp_p0: controller's p0 mapped memory address
> + * @phy_io: phy's mapped memory address
> + * @ln_tx0_io: USB-DP lane TX0's mapped memory address
> + * @ln_tx1_io: USB-DP lane TX1's mapped memory address
> + * @dp_cc_io: DP cc's mapped memory address
> + * @qfprom_io: qfprom's mapped memory address
> + * @dp_pll_io: DP PLL mapped memory address
> + * @usb3_dp_com: USB3 DP PHY combo mapped memory address
> + */
> +struct dp_io {
> +	struct dss_io_data ctrl_io;
> +	struct dss_io_data dp_ahb;
> +	struct dss_io_data dp_aux;
> +	struct dss_io_data dp_link;
> +	struct dss_io_data dp_p0;
> +	struct dss_io_data phy_io;
> +	struct dss_io_data ln_tx0_io;
> +	struct dss_io_data ln_tx1_io;
> +	struct dss_io_data dp_cc_io;
> +	struct dss_io_data qfprom_io;
> +	struct dss_io_data dp_pll_io;
> +	struct dss_io_data usb3_dp_com;
> +};
> +
> +/**
> + * struct dp_pinctrl - DP's pin control
> + *
> + * @pin: pin-controller's instance
> + * @state_active: active state pin control
> + * @state_hpd_active: hpd active state pin control
> + * @state_suspend: suspend state pin control
> + */
> +struct dp_pinctrl {
> +	struct pinctrl *pin;
> +	struct pinctrl_state *state_active;
> +	struct pinctrl_state *state_hpd_active;
> +	struct pinctrl_state *state_suspend;
> +};
> +
> +#define DP_ENUM_STR(x)	#x
> +#define DP_AUX_CFG_MAX_VALUE_CNT 3
> +/**
> + * struct dp_aux_cfg - DP's AUX configuration settings
> + *
> + * @cfg_cnt: count of the configurable settings for the AUX register
> + * @current_index: current index of the AUX config lut
> + * @offset: register offset of the AUX config register
> + * @lut: look up table for the AUX config values for this register
> + */
> +struct dp_aux_cfg {
> +	u32 cfg_cnt;
> +	u32 current_index;
> +	u32 offset;
> +	u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
> +};
> +
> +/* PHY AUX config registers */
> +enum dp_phy_aux_config_type {
> +	PHY_AUX_CFG0,
> +	PHY_AUX_CFG1,
> +	PHY_AUX_CFG2,
> +	PHY_AUX_CFG3,
> +	PHY_AUX_CFG4,
> +	PHY_AUX_CFG5,
> +	PHY_AUX_CFG6,
> +	PHY_AUX_CFG7,
> +	PHY_AUX_CFG8,
> +	PHY_AUX_CFG9,
> +	PHY_AUX_CFG_MAX,
> +};
> +
> +#define DP_DEV_REGULATOR_MAX	4
> +
> +/* Regulators for DP devices */
> +struct dp_reg_entry {
> +	char name[32];
> +	int enable_load;
> +	int disable_load;
> +};
> +
> +struct dp_regulator_cfg {
> +	int num;
> +	struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
> +};
> +
> +
> +static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
> +{
> +	switch (cfg_type) {
> +	case PHY_AUX_CFG0:
> +		return DP_ENUM_STR(PHY_AUX_CFG0);
> +	case PHY_AUX_CFG1:
> +		return DP_ENUM_STR(PHY_AUX_CFG1);
> +	case PHY_AUX_CFG2:
> +		return DP_ENUM_STR(PHY_AUX_CFG2);
> +	case PHY_AUX_CFG3:
> +		return DP_ENUM_STR(PHY_AUX_CFG3);
> +	case PHY_AUX_CFG4:
> +		return DP_ENUM_STR(PHY_AUX_CFG4);
> +	case PHY_AUX_CFG5:
> +		return DP_ENUM_STR(PHY_AUX_CFG5);
> +	case PHY_AUX_CFG6:
> +		return DP_ENUM_STR(PHY_AUX_CFG6);
> +	case PHY_AUX_CFG7:
> +		return DP_ENUM_STR(PHY_AUX_CFG7);
> +	case PHY_AUX_CFG8:
> +		return DP_ENUM_STR(PHY_AUX_CFG8);
> +	case PHY_AUX_CFG9:
> +		return DP_ENUM_STR(PHY_AUX_CFG9);
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +/**
> + * struct dp_parser - DP parser's data exposed to clients
> + *
> + * @pdev: platform data of the client
> + * @mp: gpio, regulator and clock related data
> + * @pinctrl: pin-control related data
> + * @aux_en_gpio: GPIO to control AUX data when using combo PHY
> + * @aux_sel_gpio: GPIO to control plug orientation when using combo PHY
> + * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
> + * @combo_phy_en: Boolean to check whether combo PHY is used
> + * @disp_data: controller's display related data
> + * @parse: function to be called by client to parse device tree.
> + */
> +struct dp_parser {
> +	struct platform_device *pdev;
> +	struct dss_module_power mp[DP_MAX_PM];
> +	struct dp_pinctrl pinctrl;
> +	unsigned int aux_en_gpio;
> +	unsigned int aux_sel_gpio;
> +	unsigned int usbplug_cc_gpio;
> +	bool combo_phy_en;
> +	struct dp_io io;
> +	struct dp_display_data disp_data;
> +	const struct dp_regulator_cfg *regulator_cfg;
> +	u8 l_map[4];
> +	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
> +	u32 max_pclk_khz;
> +
> +	int (*parse)(struct dp_parser *parser);
> +};
> +
> +/**
> + * dp_parser_get() - get the DP's device tree parser module
> + *
> + * @pdev: platform data of the client
> + * return: pointer to dp_parser structure.
> + *
> + * This function provides client capability to parse the
> + * device tree and populate the data structures. The data
> + * related to clock, regulators, pin-control and other
> + * can be parsed using this module.
> + */
> +struct dp_parser *dp_parser_get(struct platform_device *pdev);
> +
> +/**
> + * dp_parser_put() - cleans the dp_parser module
> + *
> + * @parser: pointer to the parser's data.
> + */
> +void dp_parser_put(struct dp_parser *parser);
> +#endif
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> new file mode 100644
> index 0000000..3fa4c9b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -0,0 +1,558 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/clk.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of_gpio.h>
> +#include "dp_power.h"
> +
> +struct dp_power_private {
> +	struct dp_parser *parser;
> +	struct platform_device *pdev;
> +	struct clk *pixel_clk_rcg;
> +	struct clk *link_clk_src;
> +	struct clk *pixel_provider;
> +	struct clk *link_provider;
> +	struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
> +
> +	struct dp_power dp_power;
> +};
> +
> +static void dp_power_regulator_disable(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	int num = power->parser->regulator_cfg->num;
> +	int i;
> +
> +	DBG("");
> +	for (i = num - 1; i >= 0; i--)
> +		if (regs[i].disable_load >= 0)
> +			regulator_set_load(s[i].consumer,
> +					   regs[i].disable_load);
> +
> +	regulator_bulk_disable(num, s);
> +}
> +
> +static int dp_power_regulator_enable(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	int num = power->parser->regulator_cfg->num;
> +	int ret, i;
> +
> +	DBG("");
> +	for (i = 0; i < num; i++) {
> +		if (regs[i].enable_load >= 0) {
> +			ret = regulator_set_load(s[i].consumer,
> +						 regs[i].enable_load);
> +			if (ret < 0) {
> +				pr_err("regulator %d set op mode failed, %d\n",
> +					i, ret);
> +				goto fail;
> +			}
> +		}
> +	}
> +
> +	ret = regulator_bulk_enable(num, s);
> +	if (ret < 0) {
> +		pr_err("regulator enable failed, %d\n", ret);
> +		goto fail;
> +	}
> +
> +	return 0;
> +
> +fail:
> +	for (i--; i >= 0; i--)
> +		regulator_set_load(s[i].consumer, regs[i].disable_load);
> +	return ret;
> +}
> +
> +static int dp_power_regulator_init(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	struct platform_device *pdev = power->pdev;
> +	int num = power->parser->regulator_cfg->num;
> +	int i, ret;
> +
> +	for (i = 0; i < num; i++)
> +		s[i].supply = regs[i].name;
> +
> +	ret = devm_regulator_bulk_get(&pdev->dev, num, s);
> +	if (ret < 0) {
> +		pr_err("%s: failed to init regulator, ret=%d\n",
> +						__func__, ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_pinctrl_set(struct dp_power_private *power, bool active)
> +{
> +	int rc = -EFAULT;
> +	struct pinctrl_state *pin_state;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return 0;
> +
> +	pin_state = active ? parser->pinctrl.state_active
> +				: parser->pinctrl.state_suspend;
> +
> +	rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
> +	if (rc) {
> +		DRM_ERROR("can not set %s pins\n",
> +			active ? "dp_active" : "dp_sleep");
> +		return rc;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_clk_init(struct dp_power_private *power)
> +{
> +	int rc = 0;
> +	struct dss_module_power *core, *ctrl;
> +	struct device *dev = &power->pdev->dev;
> +
> +	core = &power->parser->mp[DP_CORE_PM];
> +	ctrl = &power->parser->mp[DP_CTRL_PM];
> +
> +	if (power->parser->pll && power->parser->pll->get_provider) {
> +		rc = power->parser->pll->get_provider(power->parser->pll,
> +				&power->link_provider, &power->pixel_provider);
> +		if (rc) {
> +			pr_info("%s: can't get provider from pll, don't set parent\n",
> +				__func__);
> +			return 0;
> +		}
> +	}
> +
> +	rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
> +	if (rc) {
> +		DRM_ERROR("failed to get %s clk. err=%d\n",
> +			dp_parser_pm_name(DP_CORE_PM), rc);
> +		return rc;
> +	}
> +
> +	rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
> +	if (rc) {
> +		DRM_ERROR("failed to get %s clk. err=%d\n",
> +			dp_parser_pm_name(DP_CTRL_PM), rc);
> +		msm_dss_put_clk(core->clk_config, core->num_clk);
> +		return -ENODEV;
> +	}
> +
> +	power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
> +	if (IS_ERR(power->pixel_clk_rcg)) {
> +		DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
> +		power->pixel_clk_rcg = NULL;
> +		msm_dss_put_clk(core->clk_config, core->num_clk);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_clk_deinit(struct dp_power_private *power)
> +{
> +	struct dss_module_power *core, *ctrl;
> +
> +	core = &power->parser->mp[DP_CORE_PM];
> +	ctrl = &power->parser->mp[DP_CTRL_PM];
> +
> +	if (!core || !ctrl) {
> +		DRM_ERROR("invalid power_data\n");
> +		return -EINVAL;
> +	}
> +
> +	msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
> +	msm_dss_put_clk(core->clk_config, core->num_clk);
> +	return 0;
> +}
> +
> +static int dp_power_clk_set_rate(struct dp_power_private *power,
> +		enum dp_pm_type module, bool enable)
> +{
> +	int rc = 0;
> +	struct dss_module_power *mp = &power->parser->mp[module];
> +
> +	if (enable) {
> +		rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> +		if (rc) {
> +			DRM_ERROR("failed to set clks rate.\n");
> +			return rc;
> +		}
> +	}
> +
> +	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
> +	if (rc) {
> +		DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
> +		return rc;
> +	}
> +
> +	return 0;
> +}
> +
> +int dp_power_clk_enable(struct dp_power *dp_power,
> +		enum dp_pm_type pm_type, bool enable)
> +{
> +	int rc = 0;
> +	struct dss_module_power *mp;
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +	mp = &power->parser->mp[pm_type];
> +
> +	if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
> +		DRM_ERROR("unsupported power module: %s\n",
> +				dp_parser_pm_name(pm_type));
> +		return -EINVAL;
> +	}
> +
> +	if (enable) {
> +		if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
> +			DRM_DEBUG_DP("core clks already enabled\n");
> +			return 0;
> +		}
> +
> +		if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
> +			DRM_DEBUG_DP("links clks already enabled\n");
> +			return 0;
> +		}
> +
> +		if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
> +			DRM_DEBUG_DP("Need to enable core clks before link clks\n");
> +
> +			rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
> +			if (rc) {
> +				DRM_ERROR("failed to enable clks: %s. err=%d\n",
> +					dp_parser_pm_name(DP_CORE_PM), rc);
> +				return rc;
> +			}
> +			dp_power->core_clks_on = true;
> +		}
> +	}
> +
> +	rc = dp_power_clk_set_rate(power, pm_type, enable);
> +	if (rc) {
> +		DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
> +			enable ? "enable" : "disable",
> +			dp_parser_pm_name(pm_type), rc);
> +			return rc;
> +	}
> +
> +	if (pm_type == DP_CORE_PM)
> +		dp_power->core_clks_on = enable;
> +	else
> +		dp_power->link_clks_on = enable;
> +
> +	DRM_DEBUG_DP("%s clocks for %s\n",
> +			enable ? "enable" : "disable",
> +			dp_parser_pm_name(pm_type));
> +	DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
> +		dp_power->link_clks_on ? "on" : "off",
> +		dp_power->core_clks_on ? "on" : "off");
> +
> +	return 0;
> +}
> +
> +static int dp_power_request_gpios(struct dp_power_private *power)
> +{
> +	int rc = 0;
> +	struct device *dev = &power->pdev->dev;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (gpio_is_valid(parser->aux_en_gpio)) {
> +		rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
> +		if (rc) {
> +			DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	if (gpio_is_valid(parser->aux_sel_gpio)) {
> +		rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
> +		if (rc) {
> +			DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	if (gpio_is_valid(parser->usbplug_cc_gpio)) {
> +		rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
> +		if (rc) {
> +			DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	return 0;
> +}
> +
> +static void dp_power_set_gpio(struct dp_power_private *power, bool flip)
> +{
> +	struct dp_parser *parser = power->parser;
> +
> +	if (gpio_is_valid(parser->aux_sel_gpio))
> +		gpio_direction_output(parser->aux_sel_gpio, flip);
> +
> +	if (gpio_is_valid(parser->aux_en_gpio))
> +		gpio_direction_output(parser->aux_en_gpio, 0);
> +
> +	if (gpio_is_valid(parser->usbplug_cc_gpio))
> +		gpio_set_value(parser->usbplug_cc_gpio, 0);
> +}
> +
> +static int dp_power_config_gpios(struct dp_power_private *power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return rc;
> +
> +	rc = dp_power_request_gpios(power);
> +	if (rc) {
> +		DRM_ERROR("gpio request failed\n");
> +		return rc;
> +	}
> +
> +	dp_power_set_gpio(power, flip);
> +	return 0;
> +}
> +
> +static void dp_power_disable_gpios(struct dp_power_private *power)
> +{
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return;
> +
> +	gpio_set_value(parser->aux_sel_gpio, 0);
> +	gpio_set_value(parser->aux_en_gpio, 0);
> +	gpio_set_value(parser->usbplug_cc_gpio, 0);
> +	gpio_free(parser->aux_sel_gpio);
> +	gpio_free(parser->aux_en_gpio);
> +	gpio_free(parser->usbplug_cc_gpio);
> +}
> +
> +int dp_power_client_init(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		return -EINVAL;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_enable(&power->pdev->dev);
> +
> +	rc = dp_power_regulator_init(power);
> +	if (rc) {
> +		DRM_ERROR("failed to init regulators %d\n", rc);
> +		goto error;
> +	}
> +
> +	rc = dp_power_clk_init(power);
> +	if (rc) {
> +		DRM_ERROR("failed to init clocks %d\n", rc);
> +		goto error;
> +	}
> +	return 0;
> +
> +error:
> +	pm_runtime_disable(&power->pdev->dev);
> +	return rc;
> +}
> +
> +void dp_power_client_deinit(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		return;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	dp_power_clk_deinit(power);
> +	pm_runtime_disable(&power->pdev->dev);
> +
> +}
> +
> +int dp_power_set_link_clk_parent(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +	u32 num;
> +	struct dss_clk *cfg;
> +	char *name = "ctrl_link_clk";
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	num = power->parser->mp[DP_CTRL_PM].num_clk;
> +	cfg = power->parser->mp[DP_CTRL_PM].clk_config;
> +
> +	while (num && strcmp(cfg->clk_name, name)) {
> +		num--;
> +		cfg++;
> +	}
> +
> +	if (num && power->link_provider) {
> +		power->link_clk_src = clk_get_parent(cfg->clk);
> +			if (power->link_clk_src) {
> +				clk_set_parent(power->link_clk_src, power->link_provider);
> +				DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> +						__clk_get_name(power->link_provider),
> +						__clk_get_name(power->link_clk_src));
> +			} else {
> +				DRM_ERROR("couldn't get parent for clk=%s\n", name);
> +				rc = -EINVAL;
> +			}
> +	} else {
> +		DRM_ERROR("%s clock could not be set parent\n", name);
> +		rc = -EINVAL;
> +	}
> +exit:
> +	return rc;
> +}
> +
> +int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	if (power->pixel_clk_rcg && power->pixel_provider) {
> +		rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
> +		if (rc) {
> +			DRM_ERROR("failed to set parent clk src, %d\n", rc);
> +			return rc;
> +		}
> +		DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> +					__clk_get_name(power->pixel_provider),
> +					__clk_get_name(power->pixel_clk_rcg));
> +	}
> +
> +	return 0;
> +}
> +
> +int dp_power_init(struct dp_power *dp_power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_get_sync(&power->pdev->dev);
> +	rc = dp_power_regulator_enable(power);
> +	if (rc) {
> +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> +		goto exit;
> +	}
> +
> +	rc = dp_power_pinctrl_set(power, true);
> +	if (rc) {
> +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> +		goto err_pinctrl;
> +	}
> +
> +	rc = dp_power_config_gpios(power, flip);
> +	if (rc) {
> +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> +		goto err_gpio;
> +	}
> +
> +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> +	if (rc) {
> +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> +		goto err_clk;
> +	}
> +
> +	return 0;
> +
> +err_clk:
> +	dp_power_disable_gpios(power);
> +err_gpio:
> +	dp_power_pinctrl_set(power, false);
> +err_pinctrl:
> +	dp_power_regulator_disable(power);
> +exit:
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return rc;
> +}
> +
> +int dp_power_deinit(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> +	dp_power_disable_gpios(power);
> +	dp_power_pinctrl_set(power, false);
> +	dp_power_regulator_disable(power);
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return 0;
> +}
> +
> +struct dp_power *dp_power_get(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +	struct dp_power *dp_power;
> +
> +	if (!parser) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
> +	if (!power) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	power->parser = parser;
> +	power->pdev = parser->pdev;
> +
> +	dp_power = &power->dp_power;
> +
> +	return dp_power;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_power_put(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power = NULL;
> +
> +	if (!dp_power)
> +		return;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	devm_kfree(&power->pdev->dev, power);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
> new file mode 100644
> index 0000000..40d7e73
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
> @@ -0,0 +1,52 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_POWER_H_
> +#define _DP_POWER_H_
> +
> +#include "dp_parser.h"
> +
> +/**
> + * sruct dp_power - DisplayPort's power related data
> + *
> + * @init: initializes the regulators/core clocks/GPIOs/pinctrl
> + * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
> + * @clk_enable: enable/disable the DP clocks
> + * @set_link_clk_parent: set the parent of DP link clock
> + * @set_pixel_clk_parent: set the parent of DP pixel clock
> + */
> +struct dp_power {
> +	bool core_clks_on;
> +	bool link_clks_on;
> +};
> +
> +int dp_power_init(struct dp_power *power, bool flip);
> +int dp_power_deinit(struct dp_power *power);
> +int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
> +				bool enable);
> +int dp_power_set_link_clk_parent(struct dp_power *power);
> +int dp_power_set_pixel_clk_parent(struct dp_power *power);
> +int dp_power_client_init(struct dp_power *power);
> +void dp_power_client_deinit(struct dp_power *power);
> +
> +/**
> + * dp_power_get() - configure and get the DisplayPort power module data
> + *
> + * @parser: instance of parser module
> + * return: pointer to allocated power module data
> + *
> + * This API will configure the DisplayPort's power module and provides
> + * methods to be called by the client to configure the power related
> + * modueles.
> + */
> +struct dp_power *dp_power_get(struct dp_parser *parser);
> +
> +/**
> + * dp_power_put() - release the power related resources
> + *
> + * @power: pointer to the power module's data
> + */
> +void dp_power_put(struct dp_power *power);
> +#endif /* _DP_POWER_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
> new file mode 100644
> index 0000000..5468f7b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
> @@ -0,0 +1,488 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_REG_H_
> +#define _DP_REG_H_
> +
> +/* DP_TX Registers */
> +#define REG_DP_HW_VERSION			(0x00000000)
> +
> +#define REG_DP_SW_RESET				(0x00000010)
> +#define DP_SW_RESET				(0x00000001)
> +
> +#define REG_DP_PHY_CTRL				(0x00000014)
> +#define DP_PHY_CTRL_SW_RESET_PLL		(0x00000001)
> +#define DP_PHY_CTRL_SW_RESET			(0x00000004)
> +
> +#define REG_DP_CLK_CTRL				(0x00000018)
> +#define REG_DP_CLK_ACTIVE			(0x0000001C)
> +#define REG_DP_INTR_STATUS			(0x00000020)
> +#define REG_DP_INTR_STATUS2			(0x00000024)
> +#define REG_DP_INTR_STATUS3			(0x00000028)
> +
> +#define REG_DP_DP_HPD_CTRL			(0x00000000)
> +#define DP_DP_HPD_CTRL_HPD_EN			(0x00000001)
> +
> +#define REG_DP_DP_HPD_INT_STATUS		(0x00000004)
> +
> +#define REG_DP_DP_HPD_INT_ACK			(0x00000008)
> +#define DP_DP_HPD_PLUG_INT_ACK			(0x00000001)
> +#define DP_DP_IRQ_HPD_INT_ACK			(0x00000002)
> +#define DP_DP_HPD_REPLUG_INT_ACK		(0x00000004)
> +#define DP_DP_HPD_UNPLUG_INT_ACK		(0x00000008)
> +
> +#define REG_DP_DP_HPD_INT_MASK			(0x0000000C)
> +#define DP_DP_HPD_PLUG_INT_MASK			(0x00000001)
> +#define DP_DP_IRQ_HPD_INT_MASK			(0x00000002)
> +#define DP_DP_HPD_REPLUG_INT_MASK		(0x00000004)
> +#define DP_DP_HPD_UNPLUG_INT_MASK		(0x00000008)
> +
> +#define REG_DP_DP_HPD_REFTIMER			(0x00000018)
> +#define REG_DP_DP_HPD_EVENT_TIME_0		(0x0000001C)
> +#define REG_DP_DP_HPD_EVENT_TIME_1		(0x00000020)
> +
> +#define REG_DP_AUX_CTRL				(0x00000030)
> +#define DP_AUX_CTRL_ENABLE			(0x00000001)
> +#define DP_AUX_CTRL_RESET			(0x00000002)
> +
> +#define REG_DP_AUX_DATA				(0x00000034)
> +#define DP_AUX_DATA_READ			(0x00000001)
> +#define DP_AUX_DATA_WRITE			(0x00000000)
> +#define DP_AUX_DATA_OFFSET			(0x00000008)
> +#define DP_AUX_DATA_INDEX_OFFSET		(0x00000010)
> +#define DP_AUX_DATA_MASK			(0x0000ff00)
> +#define DP_AUX_DATA_INDEX_WRITE			(0x80000000)
> +
> +#define REG_DP_AUX_TRANS_CTRL			(0x00000038)
> +#define DP_AUX_TRANS_CTRL_I2C			(0x00000100)
> +#define DP_AUX_TRANS_CTRL_GO			(0x00000200)
> +#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR		(0x00000400)
> +#define DP_AUX_TRANS_CTRL_NO_SEND_STOP		(0x00000800)
> +
> +#define REG_DP_TIMEOUT_COUNT			(0x0000003C)
> +#define REG_DP_AUX_LIMITS			(0x00000040)
> +#define REG_DP_AUX_STATUS			(0x00000044)
> +
> +#define DP_DPCD_CP_IRQ				(0x201)
> +#define DP_DPCD_RXSTATUS			(0x69493)
> +
> +#define DP_INTERRUPT_TRANS_NUM			(0x000000A0)
> +
> +#define REG_DP_MAINLINK_CTRL			(0x00000000)
> +#define DP_MAINLINK_CTRL_ENABLE			(0x00000001)
> +#define DP_MAINLINK_CTRL_RESET			(0x00000002)
> +#define DP_MAINLINK_FB_BOUNDARY_SEL		(0x02000000)
> +
> +#define REG_DP_STATE_CTRL			(0x00000004)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1	(0x00000001)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2	(0x00000002)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3	(0x00000004)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4	(0x00000008)
> +#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE	(0x00000010)
> +#define DP_STATE_CTRL_LINK_PRBS7		(0x00000020)
> +#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN	(0x00000040)
> +#define DP_STATE_CTRL_SEND_VIDEO		(0x00000080)
> +#define DP_STATE_CTRL_PUSH_IDLE 		(0x00000100)
> +
> +#define REG_DP_CONFIGURATION_CTRL		(0x00000008)
> +#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK	(0x00000001)
> +#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
> +#define DP_CONFIGURATION_CTRL_P_INTERLACED	(0x00000004)
> +#define DP_CONFIGURATION_CTRL_INTERLACED_BTF	(0x00000008)
> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES	(0x00000010)
> +#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING	(0x00000040)
> +#define DP_CONFIGURATION_CTRL_SEND_VSC		(0x00000080)
> +#define DP_CONFIGURATION_CTRL_BPC		(0x00000100)
> +#define DP_CONFIGURATION_CTRL_ASSR		(0x00000400)
> +#define DP_CONFIGURATION_CTRL_RGB_YUV		(0x00000800)
> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV		(0x00002000)
> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
> +#define DP_CONFIGURATION_CTRL_BPC_SHIFT 	      (0x08)
> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT	      (0x0D)
> +
> +#define REG_DP_SOFTWARE_MVID			(0x00000010)
> +#define REG_DP_SOFTWARE_NVID			(0x00000018)
> +#define REG_DP_TOTAL_HOR_VER			(0x0000001C)
> +#define REG_DP_START_HOR_VER_FROM_SYNC		(0x00000020)
> +#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY	(0x00000024)
> +#define REG_DP_ACTIVE_HOR_VER			(0x00000028)
> +
> +#define REG_DP_MISC1_MISC0			(0x0000002C)
> +#define DP_MISC0_SYNCHRONOUS_CLK		(0x00000001)
> +#define DP_MISC0_COLORIMETRY_CFG_SHIFT		(0x00000001)
> +#define DP_MISC0_TEST_BITS_DEPTH_SHIFT		(0x00000005)
> +
> +#define REG_DP_VALID_BOUNDARY			(0x00000030)
> +#define REG_DP_VALID_BOUNDARY_2			(0x00000034)
> +
> +#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING	(0x00000038)
> +#define LANE0_MAPPING_SHIFT			(0x00000000)
> +#define LANE1_MAPPING_SHIFT			(0x00000002)
> +#define LANE2_MAPPING_SHIFT			(0x00000004)
> +#define LANE3_MAPPING_SHIFT			(0x00000006)
> +
> +#define REG_DP_MAINLINK_READY			(0x00000040)
> +#define DP_MAINLINK_READY_FOR_VIDEO		(0x00000001)
> +#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT	(0x00000003)
> +
> +#define REG_DP_MAINLINK_LEVELS			(0x00000044)
> +#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2	(0x00000002)
> +
> +
> +#define REG_DP_TU				(0x0000004C)
> +
> +#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET	(0x00000054)
> +#define DP_HBR2_ERM_PATTERN			(0x00010000)
> +
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0	(0x000000C0)
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1	(0x000000C4)
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2	(0x000000C8)
> +
> +#define MMSS_DP_MISC1_MISC0			(0x0000002C)
> +#define MMSS_DP_AUDIO_TIMING_GEN		(0x00000080)
> +#define MMSS_DP_AUDIO_TIMING_RBR_32		(0x00000084)
> +#define MMSS_DP_AUDIO_TIMING_HBR_32		(0x00000088)
> +#define MMSS_DP_AUDIO_TIMING_RBR_44		(0x0000008C)
> +#define MMSS_DP_AUDIO_TIMING_HBR_44		(0x00000090)
> +#define MMSS_DP_AUDIO_TIMING_RBR_48		(0x00000094)
> +#define MMSS_DP_AUDIO_TIMING_HBR_48		(0x00000098)
> +
> +#define MMSS_DP_PSR_CRC_RG			(0x00000154)
> +#define MMSS_DP_PSR_CRC_B			(0x00000158)
> +
> +#define REG_DP_COMPRESSION_MODE_CTRL		(0x00000180)
> +
> +#define MMSS_DP_AUDIO_CFG			(0x00000200)
> +#define MMSS_DP_AUDIO_STATUS			(0x00000204)
> +#define MMSS_DP_AUDIO_PKT_CTRL			(0x00000208)
> +#define MMSS_DP_AUDIO_PKT_CTRL2			(0x0000020C)
> +#define MMSS_DP_AUDIO_ACR_CTRL			(0x00000210)
> +#define MMSS_DP_AUDIO_CTRL_RESET		(0x00000214)
> +
> +#define MMSS_DP_SDP_CFG				(0x00000228)
> +#define MMSS_DP_SDP_CFG2			(0x0000022C)
> +#define MMSS_DP_AUDIO_TIMESTAMP_0		(0x00000230)
> +#define MMSS_DP_AUDIO_TIMESTAMP_1		(0x00000234)
> +
> +#define MMSS_DP_AUDIO_STREAM_0			(0x00000240)
> +#define MMSS_DP_AUDIO_STREAM_1			(0x00000244)
> +
> +#define MMSS_DP_EXTENSION_0			(0x00000250)
> +#define MMSS_DP_EXTENSION_1			(0x00000254)
> +#define MMSS_DP_EXTENSION_2			(0x00000258)
> +#define MMSS_DP_EXTENSION_3			(0x0000025C)
> +#define MMSS_DP_EXTENSION_4			(0x00000260)
> +#define MMSS_DP_EXTENSION_5			(0x00000264)
> +#define MMSS_DP_EXTENSION_6			(0x00000268)
> +#define MMSS_DP_EXTENSION_7			(0x0000026C)
> +#define MMSS_DP_EXTENSION_8			(0x00000270)
> +#define MMSS_DP_EXTENSION_9			(0x00000274)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_0		(0x00000278)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_1		(0x0000027C)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_2		(0x00000280)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_3		(0x00000284)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_4		(0x00000288)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_5		(0x0000028C)
> +#define MMSS_DP_AUDIO_ISRC_0			(0x00000290)
> +#define MMSS_DP_AUDIO_ISRC_1			(0x00000294)
> +#define MMSS_DP_AUDIO_ISRC_2			(0x00000298)
> +#define MMSS_DP_AUDIO_ISRC_3			(0x0000029C)
> +#define MMSS_DP_AUDIO_ISRC_4			(0x000002A0)
> +#define MMSS_DP_AUDIO_ISRC_5			(0x000002A4)
> +#define MMSS_DP_AUDIO_INFOFRAME_0		(0x000002A8)
> +#define MMSS_DP_AUDIO_INFOFRAME_1		(0x000002AC)
> +#define MMSS_DP_AUDIO_INFOFRAME_2		(0x000002B0)
> +
> +#define MMSS_DP_GENERIC0_0			(0x00000300)
> +#define MMSS_DP_GENERIC0_1			(0x00000304)
> +#define MMSS_DP_GENERIC0_2			(0x00000308)
> +#define MMSS_DP_GENERIC0_3			(0x0000030C)
> +#define MMSS_DP_GENERIC0_4			(0x00000310)
> +#define MMSS_DP_GENERIC0_5			(0x00000314)
> +#define MMSS_DP_GENERIC0_6			(0x00000318)
> +#define MMSS_DP_GENERIC0_7			(0x0000031C)
> +#define MMSS_DP_GENERIC0_8			(0x00000320)
> +#define MMSS_DP_GENERIC0_9			(0x00000324)
> +#define MMSS_DP_GENERIC1_0			(0x00000328)
> +#define MMSS_DP_GENERIC1_1			(0x0000032C)
> +#define MMSS_DP_GENERIC1_2			(0x00000330)
> +#define MMSS_DP_GENERIC1_3			(0x00000334)
> +#define MMSS_DP_GENERIC1_4			(0x00000338)
> +#define MMSS_DP_GENERIC1_5			(0x0000033C)
> +#define MMSS_DP_GENERIC1_6			(0x00000340)
> +#define MMSS_DP_GENERIC1_7			(0x00000344)
> +#define MMSS_DP_GENERIC1_8			(0x00000348)
> +#define MMSS_DP_GENERIC1_9			(0x0000034C)
> +
> +#define MMSS_DP_VSCEXT_0			(0x000002D0)
> +#define MMSS_DP_VSCEXT_1			(0x000002D4)
> +#define MMSS_DP_VSCEXT_2			(0x000002D8)
> +#define MMSS_DP_VSCEXT_3			(0x000002DC)
> +#define MMSS_DP_VSCEXT_4			(0x000002E0)
> +#define MMSS_DP_VSCEXT_5			(0x000002E4)
> +#define MMSS_DP_VSCEXT_6			(0x000002E8)
> +#define MMSS_DP_VSCEXT_7			(0x000002EC)
> +#define MMSS_DP_VSCEXT_8			(0x000002F0)
> +#define MMSS_DP_VSCEXT_9			(0x000002F4)
> +
> +#define MMSS_DP_BIST_ENABLE			(0x00000000)
> +#define DP_BIST_ENABLE_DPBIST_EN		(0x00000001)
> +
> +#define MMSS_DP_TIMING_ENGINE_EN		(0x00000010)
> +#define DP_TIMING_ENGINE_EN_EN			(0x00000001)
> +
> +#define MMSS_DP_INTF_CONFIG			(0x00000014)
> +#define MMSS_DP_INTF_HSYNC_CTL			(0x00000018)
> +#define MMSS_DP_INTF_VSYNC_PERIOD_F0		(0x0000001C)
> +#define MMSS_DP_INTF_VSYNC_PERIOD_F1		(0x00000020)
> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0	(0x00000024)
> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1	(0x00000028)
> +#define MMSS_INTF_DISPLAY_V_START_F0		(0x0000002C)
> +#define MMSS_INTF_DISPLAY_V_START_F1		(0x00000030)
> +#define MMSS_DP_INTF_DISPLAY_V_END_F0		(0x00000034)
> +#define MMSS_DP_INTF_DISPLAY_V_END_F1		(0x00000038)
> +#define MMSS_DP_INTF_ACTIVE_V_START_F0		(0x0000003C)
> +#define MMSS_DP_INTF_ACTIVE_V_START_F1		(0x00000040)
> +#define MMSS_DP_INTF_ACTIVE_V_END_F0		(0x00000044)
> +#define MMSS_DP_INTF_ACTIVE_V_END_F1		(0x00000048)
> +#define MMSS_DP_INTF_DISPLAY_HCTL		(0x0000004C)
> +#define MMSS_DP_INTF_ACTIVE_HCTL		(0x00000050)
> +#define MMSS_DP_INTF_POLARITY_CTL		(0x00000058)
> +
> +#define MMSS_DP_TPG_MAIN_CONTROL		(0x00000060)
> +#define DP_TPG_CHECKERED_RECT_PATTERN		(0x00000100)
> +
> +#define MMSS_DP_TPG_VIDEO_CONFIG		(0x00000064)
> +#define DP_TPG_VIDEO_CONFIG_BPP_8BIT		(0x00000001)
> +#define DP_TPG_VIDEO_CONFIG_RGB			(0x00000004)
> +
> +#define MMSS_DP_ASYNC_FIFO_CONFIG		(0x00000088)
> +
> +/*DP PHY Register offsets */
> +#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
> +#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
> +#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
> +#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
> +
> +#define REG_DP_PHY_CFG                          (0x00000010)
> +
> +#define REG_DP_PHY_PD_CTL                       (0x00000018)
> +#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
> +#define DP_PHY_PD_CTL_PSR_PWRDN			(0x00000002)
> +#define DP_PHY_PD_CTL_AUX_PWRDN			(0x00000004)
> +#define DP_PHY_PD_CTL_LANE_0_1_PWRDN		(0x00000008)
> +#define DP_PHY_PD_CTL_LANE_2_3_PWRDN		(0x00000010)
> +#define DP_PHY_PD_CTL_PLL_PWRDN			(0x00000020)
> +#define DP_PHY_PD_CTL_DP_CLAMP_EN		(0x00000040)
> +
> +#define REG_DP_PHY_MODE                         (0x0000001C)
> +
> +#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
> +#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
> +#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
> +#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
> +#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
> +#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
> +#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
> +#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
> +#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
> +#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
> +
> +#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
> +#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
> +#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
> +#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
> +#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
> +#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
> +
> +
> +#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
> +#define REG_DP_PHY_AUX_BIST_CFG			(0x00000050)
> +
> +#define REG_DP_PHY_VCO_DIV			0x0064
> +#define REG_DP_PHY_TX0_TX1_LANE_CTL		0x006C
> +#define REG_DP_PHY_TX2_TX3_LANE_CTL		0x0088
> +
> +#define REG_DP_PHY_SPARE0			(0x00AC)
> +#define DP_PHY_SPARE0_MASK			(0x000F)
> +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT	(0x0004);
> +
> +#define REG_DP_PHY_STATUS			(0x00C0)
> +
> +/* Tx registers */
> +#define REG_DP_PHY_TXn_BIST_MODE_LANENO		0x0000
> +#define REG_DP_PHY_TXn_CLKBUF_ENABLE		0x0008
> +
> +#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL		0x000C
> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK	0x001F
> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN	0x0020
> +
> +#define REG_DP_PHY_TXn_TX_DRV_LVL		0x001C
> +#define DP_PHY_TXn_TX_DRV_LVL_MASK		0x001F
> +#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN		0x0020
> +
> +#define REG_DP_PHY_TXn_RESET_TSYNC_EN		0x0024
> +#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN	0x0028
> +#define REG_DP_PHY_TXn_TX_BAND			0x002C
> +#define REG_DP_PHY_TXn_SLEW_CNTL		0x0030
> +#define REG_DP_PHY_TXn_INTERFACE_SELECT		0x0034
> +
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_TX		0x003C
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_RX		0x0040
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX	0x0044
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX	0x0048
> +
> +#define REG_DP_PHY_TXn_DEBUG_BUS_SEL		0x0058
> +#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN	0x005C
> +#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN		0x0060
> +#define REG_DP_PHY_TXn_TX_POL_INV		0x0064
> +#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
> +
> +#define REG_DP_PHY_TXn_LANE_MODE_1		0x008C
> +
> +#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN		0x00C0
> +#define REG_DP_PHY_TXn_TX_INTERFACE_MODE	0x00C4
> +
> +#define REG_DP_PHY_TXn_VMODE_CTRL1		0x00F0
> +
> +/* PLL register offset */
> +#define QSERDES_COM_ATB_SEL1			0x0000
> +#define QSERDES_COM_ATB_SEL2			0x0004
> +#define QSERDES_COM_FREQ_UPDATE			0x0008
> +#define QSERDES_COM_BG_TIMER			0x000C
> +#define QSERDES_COM_SSC_EN_CENTER		0x0010
> +#define QSERDES_COM_SSC_ADJ_PER1		0x0014
> +#define QSERDES_COM_SSC_ADJ_PER2		0x0018
> +#define QSERDES_COM_SSC_PER1			0x001C
> +#define QSERDES_COM_SSC_PER2			0x0020
> +#define QSERDES_COM_SSC_STEP_SIZE1		0x0024
> +#define QSERDES_COM_SSC_STEP_SIZE2		0x0028
> +#define QSERDES_COM_POST_DIV			0x002C
> +#define QSERDES_COM_POST_DIV_MUX		0x0030
> +
> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		0x0034
> +#define QSERDES_COM_BIAS_EN			0x0001
> +#define QSERDES_COM_BIAS_EN_MUX			0x0002
> +#define QSERDES_COM_CLKBUF_R_EN			0x0004
> +#define QSERDES_COM_CLKBUF_L_EN			0x0008
> +#define QSERDES_COM_EN_SYSCLK_TX_SEL		0x0010
> +#define QSERDES_COM_CLKBUF_RX_DRIVE_L		0x0020
> +#define QSERDES_COM_CLKBUF_RX_DRIVE_R		0x0040
> +
> +#define QSERDES_COM_CLK_ENABLE1			0x0038
> +#define QSERDES_COM_SYS_CLK_CTRL		0x003C
> +#define QSERDES_COM_SYSCLK_BUF_ENABLE		0x0040
> +#define QSERDES_COM_PLL_EN			0x0044
> +#define QSERDES_COM_PLL_IVCO			0x0048
> +#define QSERDES_COM_CMN_IETRIM			0x004C
> +#define QSERDES_COM_CMN_IPTRIM			0x0050
> +
> +#define QSERDES_COM_CP_CTRL_MODE0		0x0060
> +#define QSERDES_COM_CP_CTRL_MODE1		0x0064
> +#define QSERDES_COM_PLL_RCTRL_MODE0		0x0068
> +#define QSERDES_COM_PLL_RCTRL_MODE1		0x006C
> +#define QSERDES_COM_PLL_CCTRL_MODE0		0x0070
> +#define QSERDES_COM_PLL_CCTRL_MODE1		0x0074
> +#define QSERDES_COM_PLL_CNTRL			0x0078
> +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM		0x007C
> +#define QSERDES_COM_SYSCLK_EN_SEL		0x0080
> +#define QSERDES_COM_CML_SYSCLK_SEL		0x0084
> +#define QSERDES_COM_RESETSM_CNTRL		0x0088
> +#define QSERDES_COM_RESETSM_CNTRL2		0x008C
> +#define QSERDES_COM_LOCK_CMP_EN			0x0090
> +#define QSERDES_COM_LOCK_CMP_CFG		0x0094
> +#define QSERDES_COM_LOCK_CMP1_MODE0		0x0098
> +#define QSERDES_COM_LOCK_CMP2_MODE0		0x009C
> +#define QSERDES_COM_LOCK_CMP3_MODE0		0x00A0
> +
> +#define QSERDES_COM_DEC_START_MODE0		0x00B0
> +#define QSERDES_COM_DEC_START_MODE1		0x00B4
> +#define QSERDES_COM_DIV_FRAC_START1_MODE0	0x00B8
> +#define QSERDES_COM_DIV_FRAC_START2_MODE0	0x00BC
> +#define QSERDES_COM_DIV_FRAC_START3_MODE0	0x00C0
> +#define QSERDES_COM_DIV_FRAC_START1_MODE1	0x00C4
> +#define QSERDES_COM_DIV_FRAC_START2_MODE1	0x00C8
> +#define QSERDES_COM_DIV_FRAC_START3_MODE1	0x00CC
> +#define QSERDES_COM_INTEGLOOP_INITVAL		0x00D0
> +#define QSERDES_COM_INTEGLOOP_EN		0x00D4
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	0x00D8
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	0x00DC
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	0x00E0
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	0x00E4
> +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL		0x00E8
> +#define QSERDES_COM_VCO_TUNE_CTRL		0x00EC
> +#define QSERDES_COM_VCO_TUNE_MAP		0x00F0
> +
> +#define QSERDES_COM_CMN_STATUS			0x0124
> +#define QSERDES_COM_RESET_SM_STATUS		0x0128
> +
> +#define QSERDES_COM_CLK_SEL			0x0138
> +#define QSERDES_COM_HSCLK_SEL			0x013C
> +
> +#define QSERDES_COM_CORECLK_DIV_MODE0		0x0148
> +
> +#define QSERDES_COM_SW_RESET			0x0150
> +#define QSERDES_COM_CORE_CLK_EN			0x0154
> +#define QSERDES_COM_C_READY_STATUS		0x0158
> +#define QSERDES_COM_CMN_CONFIG			0x015C
> +
> +#define QSERDES_COM_SVS_MODE_CLK_SEL		0x0164
> +
> +/* DP MMSS_CC registers */
> +#define MMSS_DP_LINK_CMD_RCGR			(0x0138)
> +#define MMSS_DP_LINK_CFG_RCGR			(0x013C)
> +#define MMSS_DP_PIXEL_M				(0x0174)
> +#define MMSS_DP_PIXEL_N				(0x0178)
> +
> +/* DP HDCP 1.3 registers */
> +#define DP_HDCP_CTRL                                   (0x0A0)
> +#define DP_HDCP_STATUS                                 (0x0A4)
> +#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
> +#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
> +#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
> +#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
> +#define DP_HDCP_SHA_STATUS                             (0x0C8)
> +#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
> +#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
> +#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
> +#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
> +#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
> +
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
> +
> +/* USB3 DP COM registers */
> +#define REG_USB3_DP_COM_RESET_OVRD_CTRL			(0x1C)
> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET		(0x01)
> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX	(0x02)
> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET		(0x04)
> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX	(0x08)
> +
> +#define REG_USB3_DP_COM_PHY_MODE_CTRL			(0x00)
> +#define USB3_DP_COM_PHY_MODE_DP				(0x02)
> +
> +#define REG_USB3_DP_COM_SW_RESET			(0x04)
> +#define USB3_DP_COM_SW_RESET_SET			(0x01)
> +
> +#define REG_USB3_DP_COM_TYPEC_CTRL			(0x10)
> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL			(0x01)
> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX		(0x02)
> +
> +#define REG_USB3_DP_COM_SWI_CTRL			(0x0c)
> +
> +#define REG_USB3_DP_COM_POWER_DOWN_CTRL			(0x08)
> +#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN		(0x01)
> +
> +
> +
> +#endif /* _DP_REG_H_ */
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index c84f0a8..e5e93e3 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
>  	msm_dsi_register();
>  	msm_edp_register();
>  	msm_hdmi_register();
> +	msm_dp_register();
>  	adreno_register();
>  	return platform_driver_register(&msm_platform_driver);
>  }
> @@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
>  {
>  	DBG("fini");
>  	platform_driver_unregister(&msm_platform_driver);
> +	msm_dp_unregister();
>  	msm_hdmi_unregister();
>  	adreno_unregister();
>  	msm_edp_unregister();
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 71547e7..8b068ec 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -159,6 +159,8 @@ struct msm_drm_private {
>  	/* DSI is shared by mdp4 and mdp5 */
>  	struct msm_dsi *dsi[2];
>  
> +	struct msm_dp *dp;
> +
>  	/* when we have more than one 'msm_gpu' these need to be an array: */
>  	struct msm_gpu *gpu;
>  	struct msm_file_private *lastctx;
> @@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
>  }
>  #endif
>  
> +#ifdef CONFIG_DRM_MSM_DP
> +int __init msm_dp_register(void);
> +void __exit msm_dp_unregister(void);
> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> +			 struct drm_encoder *encoder);
> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder);
> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder);
> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode);
> +
> +#else
> +static inline int __init msm_dp_register(void)
> +{
> +	return -EINVAL;
> +}
> +static inline void __exit msm_dp_unregister(void)
> +{
> +}
> +static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
> +				       struct drm_device *dev,
> +				       struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode)
> +{
> +}
> +#endif
> +
>  void __init msm_mdp_register(void);
>  void __exit msm_mdp_unregister(void);
>  void __init msm_dpu_register(void);

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

Hi Chandan,

I have no DRM background, but I suspect one reason this patch hasn't
been reviewed in almost 3 months is its size, 8k LOC. I would suggest to
split it up into multiple pieces to make a review less daunting. Not sure
what the exact split would be, evaluating it per source file/self
contained function could be a starting point.

And please make sure to run scripts/checkpatch.pl before sending patches
(especially larger ones), reviewers don't like to spend time pointing out
formatting issues that should have been fixed beforehand:

./scripts/checkpatch.pl DPU-v3-3-5-drm-msm-dp-add-displayPort-driver-support.patch

...

total: 2 errors, 141 warnings, 8440 lines checked

Thanks

Matthias

On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> Add the needed displayPort files to enable DP driver
> on msm target.
> 
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
> 
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
> 
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/Kconfig                 |    9 +
>  drivers/gpu/drm/msm/Makefile                |   13 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
>  drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
>  drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
>  drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
>  drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590 +++++++++++++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
>  drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
>  drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
>  drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
>  drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
>  drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
>  drivers/gpu/drm/msm/dp/dp_link.c            | 1185 ++++++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
>  drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
>  drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
>  drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
>  drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
>  drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
>  drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
>  drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
>  drivers/gpu/drm/msm/msm_drv.c               |    2 +
>  drivers/gpu/drm/msm/msm_drv.h               |   42 +
>  26 files changed, 8366 insertions(+)
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
>  create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h
> 
> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> index 6deaa7d..7946cb1 100644
> --- a/drivers/gpu/drm/msm/Kconfig
> +++ b/drivers/gpu/drm/msm/Kconfig
> @@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
>  	help
>  	  Choose this option to enable HDCP state machine
>  
> +config DRM_MSM_DP
> +	bool "Enable DP support in MSM DRM driver"
> +	depends on DRM_MSM
> +	default n
> +	help
> +	  Compile in support for DP driver in msm drm driver. DP external
> +	  display support is enabled through this config option. It can
> +	  be primary or secondary display on device.
> +
>  config DRM_MSM_DSI
>  	bool "Enable DSI support in MSM DRM driver"
>  	depends on DRM_MSM
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 1579cf0..5939f41 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -2,6 +2,7 @@
>  ccflags-y := -I $(srctree)/$(src)
>  ccflags-y += -I $(srctree)/$(src)/disp/dpu1
>  ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
> +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
>  
>  msm-y := \
>  	adreno/adreno_device.o \
> @@ -96,8 +97,20 @@ msm-y := \
>  
>  msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
>  
> +
>  msm-$(CONFIG_DRM_MSM_GPU_STATE)	+= adreno/a6xx_gpu_state.o
>  
> +msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
> +	dp/dp_catalog.o \
> +	dp/dp_ctrl.o \
> +	dp/dp_display.o \
> +	dp/dp_drm.o \
> +	dp/dp_extcon.o \
> +	dp/dp_link.o \
> +	dp/dp_panel.o \
> +	dp/dp_parser.o \
> +	dp/dp_power.o
> +
>  msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
>  msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
>  msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f96e142..29ac7d3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>  
>  	trace_dpu_enc_mode_set(DRMID(drm_enc));
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
> +		msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
> +
>  	list_for_each_entry(conn_iter, connector_list, head)
>  		if (conn_iter->encoder == drm_enc)
>  			conn = conn_iter;
> @@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  {
>  	struct dpu_encoder_virt *dpu_enc = NULL;
>  	int ret = 0;
> +	struct msm_drm_private *priv;
>  	struct drm_display_mode *cur_mode = NULL;
>  
>  	if (!drm_enc) {
> @@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  
>  	mutex_lock(&dpu_enc->enc_lock);
>  	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
> +	priv = drm_enc->dev->dev_private;
>  
>  	trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
>  			     cur_mode->vdisplay);
> @@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>  
>  	_dpu_encoder_virt_enable_helper(drm_enc);
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> +		ret = msm_dp_display_enable(priv->dp,
> +						drm_enc);
> +		if (ret) {
> +			DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
> +				ret);
> +			goto out;
> +		}
> +	}
>  	dpu_enc->enabled = true;
>  
>  out:
> @@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
>  	priv = drm_enc->dev->dev_private;
>  	dpu_kms = to_dpu_kms(priv->kms);
>  
> +	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> +		if (msm_dp_display_disable(priv->dp, drm_enc)) {
> +			DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
> +			return;
> +		  }
> +	}
>  	trace_dpu_enc_disable(DRMID(drm_enc));
>  
>  	/* wait for idle */
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> new file mode 100644
> index 0000000..a6bb52a
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -0,0 +1,548 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/delay.h>
> +
> +#include "dp_reg.h"
> +#include "dp_aux.h"
> +
> +#define DP_AUX_ENUM_STR(x)		#x
> +
> +struct dp_aux_private {
> +	struct device *dev;
> +	struct dp_aux dp_aux;
> +	struct dp_catalog *catalog;
> +
> +	struct mutex mutex;
> +	struct completion comp;
> +
> +	u32 aux_error_num;
> +	u32 retry_cnt;
> +	bool cmd_busy;
> +	bool native;
> +	bool read;
> +	bool no_send_addr;
> +	bool no_send_stop;
> +	u32 offset;
> +	u32 segment;
> +	u32 isr;
> +
> +	struct drm_dp_aux drm_aux;
> +};
> +
> +static char *dp_aux_get_error(u32 aux_error)
> +{
> +	switch (aux_error) {
> +	case DP_AUX_ERR_NONE:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
> +	case DP_AUX_ERR_ADDR:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
> +	case DP_AUX_ERR_TOUT:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
> +	case DP_AUX_ERR_NACK:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
> +	case DP_AUX_ERR_DEFER:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
> +	case DP_AUX_ERR_NACK_DEFER:
> +		return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +static u32 dp_aux_write(struct dp_aux_private *aux,
> +			struct drm_dp_aux_msg *msg)
> +{
> +	u32 data[4], reg, len;
> +	u8 *msgdata = msg->buffer;
> +	int const aux_cmd_fifo_len = 128;
> +	int i = 0;
> +
> +	if (aux->read)
> +		len = 4;
> +	else
> +		len = msg->size + 4;
> +
> +	/*
> +	 * cmd fifo only has depth of 144 bytes
> +	 * limit buf length to 128 bytes here
> +	 */
> +	if (len > aux_cmd_fifo_len) {
> +		DRM_ERROR("buf len error\n");
> +		return 0;
> +	}
> +
> +	/* Pack cmd and write to HW */
> +	data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
> +	if (aux->read)
> +		data[0] |=  BIT(4); /* R/W */
> +
> +	data[1] = (msg->address >> 8) & 0xff;	/* addr[15:8] */
> +	data[2] = msg->address & 0xff;		/* addr[7:0] */
> +	data[3] = (msg->size - 1) & 0xff;	/* len[7:0] */
> +
> +	for (i = 0; i < len; i++) {
> +		reg = (i < 4) ? data[i] : msgdata[i - 4];
> +		/* index = 0, write */
> +		reg = (((reg) << DP_AUX_DATA_OFFSET)
> +		       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
> +		if (i == 0)
> +			reg |= DP_AUX_DATA_INDEX_WRITE;
> +		aux->catalog->aux_data = reg;
> +		dp_catalog_aux_write_data(aux->catalog);
> +	}
> +
> +	dp_catalog_aux_clear_trans(aux->catalog, false);
> +
> +	reg = 0; /* Transaction number == 1 */
> +	if (!aux->native) { /* i2c */
> +		reg |= DP_AUX_TRANS_CTRL_I2C;
> +
> +		if (aux->no_send_addr)
> +			reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
> +
> +		if (aux->no_send_stop)
> +			reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
> +	}
> +
> +	reg |= DP_AUX_TRANS_CTRL_GO;
> +	aux->catalog->aux_data = reg;
> +	dp_catalog_aux_write_trans(aux->catalog);
> +
> +	return len;
> +}
> +
> +static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> +			      struct drm_dp_aux_msg *msg)
> +{
> +	u32 ret = 0, len = 0, timeout;
> +	int const aux_timeout_ms = HZ/4;
> +
> +	reinit_completion(&aux->comp);
> +
> +	len = dp_aux_write(aux, msg);
> +	if (len == 0) {
> +		DRM_ERROR("DP AUX write failed\n");
> +		return -EINVAL;
> +	}
> +
> +	timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
> +	if (!timeout) {
> +		DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
> +		return -ETIMEDOUT;
> +	}
> +
> +	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> +		ret = len;
> +	} else {
> +		DRM_ERROR_RATELIMITED("aux err: %s\n",
> +			dp_aux_get_error(aux->aux_error_num));
> +
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
> +		struct drm_dp_aux_msg *msg)
> +{
> +	u32 data;
> +	u8 *dp;
> +	u32 i, actual_i;
> +	u32 len = msg->size;
> +
> +	dp_catalog_aux_clear_trans(aux->catalog, true);
> +
> +	data = 0;
> +	data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
> +	data |= DP_AUX_DATA_READ;  /* read */
> +
> +	aux->catalog->aux_data = data;
> +	dp_catalog_aux_write_data(aux->catalog);
> +
> +	dp = msg->buffer;
> +
> +	/* discard first byte */
> +	data = dp_catalog_aux_read_data(aux->catalog);
> +
> +	for (i = 0; i < len; i++) {
> +		data = dp_catalog_aux_read_data(aux->catalog);
> +		*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
> +
> +		actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
> +		if (i != actual_i)
> +			pr_warn("Index mismatch: expected %d, found %d\n",
> +				i, actual_i);
> +	}
> +}
> +
> +static void dp_aux_native_handler(struct dp_aux_private *aux)
> +{
> +	u32 isr = aux->isr;
> +
> +	if (isr & DP_INTR_AUX_I2C_DONE)
> +		aux->aux_error_num = DP_AUX_ERR_NONE;
> +	else if (isr & DP_INTR_WRONG_ADDR)
> +		aux->aux_error_num = DP_AUX_ERR_ADDR;
> +	else if (isr & DP_INTR_TIMEOUT)
> +		aux->aux_error_num = DP_AUX_ERR_TOUT;
> +	if (isr & DP_INTR_NACK_DEFER)
> +		aux->aux_error_num = DP_AUX_ERR_NACK;
> +
> +	complete(&aux->comp);
> +}
> +
> +static void dp_aux_i2c_handler(struct dp_aux_private *aux)
> +{
> +	u32 isr = aux->isr;
> +
> +	if (isr & DP_INTR_AUX_I2C_DONE) {
> +		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
> +			aux->aux_error_num = DP_AUX_ERR_NACK;
> +		else
> +			aux->aux_error_num = DP_AUX_ERR_NONE;
> +	} else {
> +		if (isr & DP_INTR_WRONG_ADDR)
> +			aux->aux_error_num = DP_AUX_ERR_ADDR;
> +		else if (isr & DP_INTR_TIMEOUT)
> +			aux->aux_error_num = DP_AUX_ERR_TOUT;
> +		if (isr & DP_INTR_NACK_DEFER)
> +			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
> +		if (isr & DP_INTR_I2C_NACK)
> +			aux->aux_error_num = DP_AUX_ERR_NACK;
> +		if (isr & DP_INTR_I2C_DEFER)
> +			aux->aux_error_num = DP_AUX_ERR_DEFER;
> +	}
> +
> +	complete(&aux->comp);
> +}
> +
> +static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
> +					     struct drm_dp_aux_msg *input_msg)
> +{
> +	u32 const edid_address = 0x50;
> +	u32 const segment_address = 0x30;
> +	bool i2c_read = input_msg->request &
> +		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +	u8 *data = NULL;
> +
> +	if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
> +		(input_msg->address != segment_address)))
> +		return;
> +
> +
> +	data = input_msg->buffer;
> +	if (input_msg->address == segment_address)
> +		aux->segment = *data;
> +	else
> +		aux->offset = *data;
> +}
> +
> +/**
> + * dp_aux_transfer_helper() - helper function for EDID read transactions
> + *
> + * @aux: DP AUX private structure
> + * @input_msg: input message from DRM upstream APIs
> + *
> + * return: void
> + *
> + * This helper function is used to fix EDID reads for non-compliant
> + * sinks that do not handle the i2c middle-of-transaction flag correctly.
> + */
> +static void dp_aux_transfer_helper(struct dp_aux_private *aux,
> +				   struct drm_dp_aux_msg *input_msg)
> +{
> +	struct drm_dp_aux_msg helper_msg;
> +	u32 const message_size = 0x10;
> +	u32 const segment_address = 0x30;
> +	bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
> +	bool i2c_read = input_msg->request &
> +		(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +
> +	if (!i2c_mot || !i2c_read || (input_msg->size == 0))
> +		return;
> +
> +	aux->read = false;
> +	aux->cmd_busy = true;
> +	aux->no_send_addr = true;
> +	aux->no_send_stop = true;
> +
> +	/*
> +	 * Send the segment address for every i2c read in which the
> +	 * middle-of-tranaction flag is set. This is required to support EDID
> +	 * reads of more than 2 blocks as the segment address is reset to 0
> +	 * since we are overriding the middle-of-transaction flag for read
> +	 * transactions.
> +	 */
> +	memset(&helper_msg, 0, sizeof(helper_msg));
> +	helper_msg.address = segment_address;
> +	helper_msg.buffer = &aux->segment;
> +	helper_msg.size = 1;
> +	dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +
> +	/*
> +	 * Send the offset address for every i2c read in which the
> +	 * middle-of-transaction flag is set. This will ensure that the sink
> +	 * will update its read pointer and return the correct portion of the
> +	 * EDID buffer in the subsequent i2c read trasntion triggered in the
> +	 * native AUX transfer function.
> +	 */
> +	memset(&helper_msg, 0, sizeof(helper_msg));
> +	helper_msg.address = input_msg->address;
> +	helper_msg.buffer = &aux->offset;
> +	helper_msg.size = 1;
> +	dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +	aux->offset += message_size;
> +
> +	if (aux->offset == 0x80 || aux->offset == 0x100)
> +		aux->segment = 0x0; /* reset segment at end of block */
> +}
> +
> +/*
> + * This function does the real job to process an AUX transaction.
> + * It will call aux_reset() function to reset the AUX channel,
> + * if the waiting is timeout.
> + */
> +static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
> +			       struct drm_dp_aux_msg *msg)
> +{
> +	ssize_t ret;
> +	int const aux_cmd_native_max = 16;
> +	int const aux_cmd_i2c_max = 128;
> +	int const retry_count = 5;
> +	struct dp_aux_private *aux = container_of(drm_aux,
> +		struct dp_aux_private, drm_aux);
> +
> +	mutex_lock(&aux->mutex);
> +
> +	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
> +
> +	/* Ignore address only message */
> +	if ((msg->size == 0) || (msg->buffer == NULL)) {
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +		ret = msg->size;
> +		goto unlock_exit;
> +	}
> +
> +	/* msg sanity check */
> +	if ((aux->native && (msg->size > aux_cmd_native_max)) ||
> +		(msg->size > aux_cmd_i2c_max)) {
> +		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> +			__func__, msg->size, msg->request);
> +		ret = -EINVAL;
> +		goto unlock_exit;
> +	}
> +
> +	dp_aux_update_offset_and_segment(aux, msg);
> +	dp_aux_transfer_helper(aux, msg);
> +
> +	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +	aux->cmd_busy = true;
> +
> +	if (aux->read) {
> +		aux->no_send_addr = true;
> +		aux->no_send_stop = false;
> +	} else {
> +		aux->no_send_addr = true;
> +		aux->no_send_stop = true;
> +	}
> +
> +	ret = dp_aux_cmd_fifo_tx(aux, msg);
> +	if ((ret < 0) && aux->native) {
> +		aux->retry_cnt++;
> +		if (!(aux->retry_cnt % retry_count))
> +			dp_catalog_aux_update_cfg(aux->catalog,
> +				aux->dp_aux.cfg, PHY_AUX_CFG1);
> +		dp_catalog_aux_reset(aux->catalog);
> +		goto unlock_exit;
> +	} else if (ret < 0) {
> +		goto unlock_exit;
> +	}
> +
> +	if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> +		if (aux->read)
> +			dp_aux_cmd_fifo_rx(aux, msg);
> +
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +	} else {
> +		/* Reply defer to retry */
> +		msg->reply = aux->native ?
> +			DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
> +	}
> +
> +	/* Return requested size for success or retry */
> +	ret = msg->size;
> +	aux->retry_cnt = 0;
> +
> +unlock_exit:
> +	aux->cmd_busy = false;
> +	mutex_unlock(&aux->mutex);
> +	return ret;
> +}
> +
> +static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg *aux_cfg)
> +{
> +	int i = 0;
> +
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++)
> +		aux_cfg[i].current_index = 0;
> +}
> +
> +void dp_aux_isr(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	aux->isr = dp_catalog_aux_get_irq(aux->catalog);
> +
> +	if (!aux->cmd_busy)
> +		return;
> +
> +	if (aux->native)
> +		dp_aux_native_handler(aux);
> +	else
> +		dp_aux_i2c_handler(aux);
> +}
> +
> +void dp_aux_reconfig(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_catalog_aux_update_cfg(aux->catalog,
> +			dp_aux->cfg, PHY_AUX_CFG1);
> +	dp_catalog_aux_reset(aux->catalog);
> +}
> +
> +void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux || !aux_cfg) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_aux_reset_phy_config_indices(aux_cfg);
> +	dp_catalog_aux_setup(aux->catalog, aux_cfg);
> +	dp_catalog_aux_reset(aux->catalog);
> +	dp_catalog_aux_enable(aux->catalog, true);
> +	aux->retry_cnt = 0;
> +}
> +
> +void dp_aux_deinit(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	dp_catalog_aux_enable(aux->catalog, false);
> +}
> +
> +int dp_aux_register(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +	int ret = 0;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	aux->drm_aux.name = "dpu_dp_aux";
> +	aux->drm_aux.dev = aux->dev;
> +	aux->drm_aux.transfer = dp_aux_transfer;
> +	ret = drm_dp_aux_register(&aux->drm_aux);
> +	if (ret) {
> +		DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
> +		goto exit;
> +	}
> +	dp_aux->drm_aux = &aux->drm_aux;
> +exit:
> +	return ret;
> +}
> +
> +void dp_aux_unregister(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +	drm_dp_aux_unregister(&aux->drm_aux);
> +}
> +
> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
> +			  struct dp_aux_cfg *aux_cfg)
> +{
> +	int rc = 0;
> +	struct dp_aux_private *aux;
> +	struct dp_aux *dp_aux;
> +
> +	if (!catalog || !aux_cfg) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -ENODEV;
> +		goto error;
> +	}
> +
> +	aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
> +	if (!aux) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	init_completion(&aux->comp);
> +	aux->cmd_busy = false;
> +	mutex_init(&aux->mutex);
> +
> +	aux->dev = dev;
> +	aux->catalog = catalog;
> +	aux->dp_aux.cfg = aux_cfg;
> +	dp_aux = &aux->dp_aux;
> +	aux->retry_cnt = 0;
> +
> +	return dp_aux;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_aux_put(struct dp_aux *dp_aux)
> +{
> +	struct dp_aux_private *aux;
> +
> +	if (!dp_aux)
> +		return;
> +
> +	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +	mutex_destroy(&aux->mutex);
> +
> +	devm_kfree(aux->dev, aux);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
> new file mode 100644
> index 0000000..8ce2221
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_AUX_H_
> +#define _DP_AUX_H_
> +
> +#include "dp_catalog.h"
> +#include <drm/drm_dp_helper.h>
> +
> +enum dp_aux_error {
> +	DP_AUX_ERR_NONE	= 0,
> +	DP_AUX_ERR_ADDR	= -1,
> +	DP_AUX_ERR_TOUT	= -2,
> +	DP_AUX_ERR_NACK	= -3,
> +	DP_AUX_ERR_DEFER	= -4,
> +	DP_AUX_ERR_NACK_DEFER	= -5,
> +};
> +
> +struct dp_aux {
> +	struct drm_dp_aux *drm_aux;
> +	struct dp_aux_cfg *cfg;
> +};
> +
> +int dp_aux_register(struct dp_aux *aux);
> +void dp_aux_unregister(struct dp_aux *aux);
> +void dp_aux_isr(struct dp_aux *aux);
> +void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
> +void dp_aux_deinit(struct dp_aux *aux);
> +void dp_aux_reconfig(struct dp_aux *aux);
> +
> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
> +			  struct dp_aux_cfg *aux_cfg);
> +void dp_aux_put(struct dp_aux *aux);
> +
> +#endif /*__DP_AUX_H_*/
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
> new file mode 100644
> index 0000000..51e21bb
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> @@ -0,0 +1,841 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <drm/drm_dp_helper.h>
> +
> +#include "dp_catalog.h"
> +#include "dp_reg.h"
> +
> +#define POLLING_SLEEP_US			1000
> +#define POLLING_TIMEOUT_US			10000
> +
> +#define REFTIMER_DEFAULT_VALUE			0x20000
> +#define SCRAMBLER_RESET_COUNT_VALUE		0xFC
> +
> +#define DP_INTERRUPT_STATUS_ACK_SHIFT	1
> +#define DP_INTERRUPT_STATUS_MASK_SHIFT	2
> +
> +#define DP_INTERRUPT_STATUS1 \
> +	(DP_INTR_AUX_I2C_DONE| \
> +	DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
> +	DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
> +	DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
> +	DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
> +
> +#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_ACK_SHIFT)
> +#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 << DP_INTERRUPT_STATUS_MASK_SHIFT)
> +
> +#define DP_INTERRUPT_STATUS2 \
> +	(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
> +	DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
> +
> +#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_ACK_SHIFT)
> +#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 << DP_INTERRUPT_STATUS_MASK_SHIFT)
> +
> +static u8 const vm_pre_emphasis[4][4] = {
> +	{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
> +	{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
> +	{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
> +	{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
> +};
> +
> +/* voltage swing, 0.2v and 1.0v are not support */
> +static u8 const vm_voltage_swing[4][4] = {
> +	{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
> +	{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
> +	{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
> +	{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
> +};
> +
> +struct dp_catalog_private {
> +	struct device *dev;
> +	struct dp_io *io;
> +	struct dp_catalog dp_catalog;
> +};
> +
> +static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_aux.base + offset);
> +}
> +
> +static inline void dp_write_aux(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure aux reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_aux.base + offset);
> +}
> +
> +static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_ahb.base + offset);
> +}
> +
> +static inline void dp_write_ahb(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure phy reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_ahb.base + offset);
> +}
> +
> +static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_cc_io.base + offset);
> +}
> +
> +static inline void dp_write_phy(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure phy reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->phy_io.base + offset);
> +}
> +
> +static inline void dp_write_pll(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
> +}
> +
> +static inline void dp_write_ln_tx0(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
> +}
> +
> +static inline void dp_write_ln_tx1(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
> +}
> +
> +static inline void dp_write_usb_cm(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure usb reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->usb3_dp_com.base + offset);
> +}
> +
> +static inline void dp_write_p0(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure interface reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_p0.base + offset);
> +}
> +
> +static inline u32 dp_read_link(struct dp_catalog_private *catalog, u32 offset)
> +{
> +	return readl_relaxed(catalog->io->dp_link.base + offset);
> +}
> +
> +static inline void dp_write_link(struct dp_catalog_private *catalog,
> +			       u32 offset, u32 data)
> +{
> +	/*
> +	 * To make sure link reg writes happens before any other operation,
> +	 * this function uses writel() instread of writel_relaxed()
> +	 */
> +	writel(data, catalog->io->dp_link.base + offset);
> +}
> +
> +/* aux related catalog functions */
> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	return dp_read_aux(catalog, REG_DP_AUX_DATA);
> +}
> +
> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
> +{
> +	int rc = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
> +	return rc;
> +}
> +
> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
> +{
> +	int rc = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
> +	return rc;
> +}
> +
> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read)
> +{
> +	int rc = 0;
> +	u32 data = 0;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (read) {
> +		data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
> +		data &= ~DP_AUX_TRANS_CTRL_GO;
> +		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
> +	} else {
> +		dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
> +	}
> +	return rc;
> +}
> +
> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
> +{
> +	u32 aux_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> +
> +	aux_ctrl |= DP_AUX_CTRL_RESET;
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +
> +	aux_ctrl &= ~DP_AUX_CTRL_RESET;
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +}
> +
> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable)
> +{
> +	u32 aux_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> +
> +	if (enable) {
> +		dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
> +		dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
> +		aux_ctrl |= DP_AUX_CTRL_ENABLE;
> +	} else {
> +		aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
> +	}
> +
> +	dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> +}
> +
> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> +		struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 new_index = 0, current_index = 0;
> +
> +	if (type >= PHY_AUX_CFG_MAX) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	current_index = cfg[type].current_index;
> +	new_index = (current_index + 1) % cfg[type].cfg_cnt;
> +	DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
> +		dp_phy_aux_config_type_to_string(type),
> +	cfg[type].lut[current_index], cfg[type].lut[new_index]);
> +
> +	dp_write_phy(catalog, cfg[type].offset,
> +			cfg[type].lut[new_index]);
> +	cfg[type].current_index = new_index;
> +}
> +
> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> +		struct dp_aux_cfg *cfg)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	int i = 0;
> +
> +	dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
> +		DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> +		DP_PHY_PD_CTL_DP_CLAMP_EN);
> +
> +	/* Turn on BIAS current for PHY/PLL */
> +	dp_write_pll(catalog,
> +		QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
> +		QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
> +		QSERDES_COM_EN_SYSCLK_TX_SEL);
> +
> +	/* DP AUX CFG register programming */
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
> +			dp_phy_aux_config_type_to_string(i),
> +			cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
> +		dp_write_phy(catalog, cfg[i].offset,
> +			cfg[i].lut[cfg[i].current_index]);
> +	}
> +
> +	dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK, PHY_AUX_STOP_ERR_MASK |
> +			PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
> +			PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
> +}
> +
> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 intr, intr_ack;
> +
> +	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
> +	intr &= ~DP_INTERRUPT_STATUS1_MASK;
> +	intr_ack = (intr & DP_INTERRUPT_STATUS1) << DP_INTERRUPT_STATUS_ACK_SHIFT;
> +	dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack | DP_INTERRUPT_STATUS1_MASK);
> +
> +	return intr;
> +
> +}
> +
> +/* controller related catalog functions */
> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
> +				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
> +	dp_write_link(catalog, REG_DP_TU, dp_tu);
> +	dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
> +}
> +
> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, state);
> +}
> +
> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 cfg)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
> +
> +	dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
> +}
> +
> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
> +	u32 ln_mapping;
> +
> +	ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
> +	ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
> +	ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
> +	ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
> +
> +	dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING, ln_mapping);
> +}
> +
> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
> +						bool enable)
> +{
> +	u32 mainlink_ctrl;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (enable) {
> +		/*
> +		* To make sure link reg writes happens before any other operation,
> +		* dp_write_link() function uses writel() instread of writel_relaxed()
> +		*/
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> +					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, DP_MAINLINK_FB_BOUNDARY_SEL);
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> +					DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
> +	} else {
> +		mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
> +		mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
> +		dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
> +	}
> +}
> +
> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
> +					u32 colorimetry_cfg, u32 test_bits_depth)
> +{
> +	u32 misc_val;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
> +	misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
> +	misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
> +	/* Configure clock to synchronous mode */
> +	misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
> +
> +	DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
> +	dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
> +}
> +
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
> +					u32 rate, u32 stream_rate_khz,
> +					bool fixed_nvid)
> +{
> +	u32 pixel_m, pixel_n;
> +	u32 mvid, nvid;
> +	u64 mvid_calc;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (fixed_nvid) {
> +		nvid = DP_LINK_CONSTANT_N_VALUE;
> +		DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
> +
> +		/*
> +		 * For intermediate results, use 64 bit arithmetic to avoid
> +		 * loss of precision.
> +		 */
> +		mvid_calc = (u64) stream_rate_khz * nvid;
> +		mvid_calc = div_u64(mvid_calc, rate);
> +
> +		/*
> +		 * truncate back to 32 bits as this final divided value will
> +		 * always be within the range of a 32 bit unsigned int.
> +		 */
> +		mvid = (u32) mvid_calc;
> +		DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
> +			rate, stream_rate_khz);
> +	} else {
> +		pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
> +		pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
> +		DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
> +
> +		mvid = (pixel_m & 0xFFFF) * 5;
> +		nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
> +
> +		DRM_DEBUG_DP("rate = %d\n", rate);
> +
> +		switch (drm_dp_link_rate_to_bw_code(rate)) {
> +		case DP_LINK_BW_5_4:
> +			nvid *= 2;
> +			break;
> +		case DP_LINK_BW_8_1:
> +			nvid *= 3;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
> +	dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
> +	dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
> +}
> +
> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
> +					u32 pattern)
> +{
> +	int bit, ret;
> +	u32 data;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	bit = BIT(pattern - 1);
> +	DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
> +
> +	bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
> +
> +	/* Poll for mainlink ready status */
> +	ret = readx_poll_timeout(readl, catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
> +				 data, data & bit,
> +				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> +	if (ret < 0) {
> +		DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 typec_ctrl;
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
> +			USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
> +			USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
> +						USB3_DP_COM_PHY_MODE_DP);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
> +						USB3_DP_COM_SW_RESET_SET);
> +
> +	/* Default configuration i.e CC1 */
> +	typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
> +	if (flip)
> +		typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
> +
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
> +						USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
> +	dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
> +
> +}
> +
> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
> +{
> +	u32 sw_reset;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	void __iomem *base;
> +
> +	base = catalog->io->dp_ahb.base;
> +
> +	sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
> +
> +	sw_reset |= DP_SW_RESET;
> +	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +
> +	sw_reset &= ~DP_SW_RESET;
> +	dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> +}
> +
> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
> +{
> +	u32 data;
> +	int ret;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	/* Poll for mainlink ready status */
> +	ret = readx_poll_timeout(readl,
> +				 catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
> +				 data, data & DP_MAINLINK_READY_FOR_VIDEO,
> +				 POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> +	if (ret < 0) {
> +		DRM_ERROR("mainlink not ready\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
> +						bool enable)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	void __iomem *base;
> +
> +	base = catalog->io->dp_ahb.base;
> +
> +	if (enable) {
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS, DP_INTERRUPT_STATUS1_MASK);
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, DP_INTERRUPT_STATUS2_MASK);
> +	} else {
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
> +		dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
> +	}
> +}
> +
> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool en)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	if (en) {
> +		u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
> +
> +		dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
> +				DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
> +				DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
> +		dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
> +				DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
> +				DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
> +
> +		/* Configure REFTIMER */
> +		reftimer |= REFTIMER_DEFAULT_VALUE;
> +		dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
> +		/* Enable HPD */
> +		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
> +	} else {
> +		/* Disable HPD */
> +		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
> +	}
> +}
> +
> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 intr, intr_ack;
> +
> +	intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
> +	intr &= ~DP_INTERRUPT_STATUS2_MASK;
> +	intr_ack = (intr & DP_INTERRUPT_STATUS2) << DP_INTERRUPT_STATUS_ACK_SHIFT;
> +	dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack | DP_INTERRUPT_STATUS2_MASK);
> +
> +	return intr;
> +}
> +
> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_ahb(catalog, REG_DP_PHY_CTRL,
> +			DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
> +	usleep_range(1000, 1100); /* h/w recommended delay */
> +	dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
> +}
> +
> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
> +		bool flipped, u8 ln_cnt)
> +{
> +	u32 info;
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u8 orientation = BIT(!!flipped);
> +
> +	info = ln_cnt & DP_PHY_SPARE0_MASK;
> +	info |= (orientation & DP_PHY_SPARE0_MASK) << DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
> +	DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
> +
> +	dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
> +}
> +
> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
> +		u8 v_level, u8 p_level)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u8 voltage_swing_cfg, pre_emphasis_cfg;
> +
> +	DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
> +
> +	voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
> +	pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
> +
> +	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
> +		DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
> +			v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
> +		return -EINVAL;
> +	}
> +
> +	/* Enable MUX to use Cursor values from these registers */
> +	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> +	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> +	/* Configure host and panel only if both values are allowed */
> +	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
> +	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL, voltage_swing_cfg);
> +	dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
> +	dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL, pre_emphasis_cfg);
> +	DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
> +			voltage_swing_cfg, pre_emphasis_cfg);
> +
> +	return 0;
> +}
> +
> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> +			u32 pattern)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 value = 0x0;
> +
> +	/* Make sure to clear the current pattern before starting a new one */
> +	dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
> +
> +	switch (pattern) {
> +	case DP_LINK_QUAL_PATTERN_D10_2:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_PRBS7:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
> +		/* 00111110000011111000001111100000 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0, 0x3E0F83E0);
> +		/* 00001111100000111110000011111000 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1, 0x0F83E0F8);
> +		/* 1111100000111110 */
> +		dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2, 0x0000F83E);
> +		return;
> +	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> +	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> +		value &= ~DP_HBR2_ERM_PATTERN;
> +		if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
> +			value = DP_HBR2_ERM_PATTERN;
> +		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
> +		value |= SCRAMBLER_RESET_COUNT_VALUE;
> +		dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET, value);
> +		dp_write_link(catalog, REG_DP_MAINLINK_LEVELS, DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
> +		dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
> +		return;
> +	default:
> +		DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
> +		return;
> +	}
> +}
> +
> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	return dp_read_link(catalog, REG_DP_MAINLINK_READY);
> +}
> +
> +/* panel related catalog functions */
> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
> +	dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC, dp_catalog->sync_start);
> +	dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY, dp_catalog->width_blanking);
> +	dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
> +	return 0;
> +}
> +
> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> +				struct drm_display_mode *drm_mode)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +	u32 hsync_period, vsync_period;
> +	u32 display_v_start, display_v_end;
> +	u32 hsync_start_x, hsync_end_x;
> +	u32 v_sync_width;
> +	u32 hsync_ctl;
> +	u32 display_hctl;
> +
> +	/* TPG config parameters*/
> +	hsync_period = drm_mode->htotal;
> +	vsync_period = drm_mode->vtotal;
> +
> +	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
> +					hsync_period);
> +	display_v_end = ((vsync_period - drm_mode->vsync_start -
> +					drm_mode->vdisplay) * hsync_period) - 1;
> +
> +	display_v_start += drm_mode->htotal - drm_mode->hsync_start;
> +	display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
> +
> +	hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
> +	hsync_end_x = hsync_period - drm_mode->hsync_start -
> +					drm_mode->hdisplay - 1;
> +
> +	v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
> +
> +	hsync_ctl = (hsync_period << 16) |
> +			(drm_mode->hsync_end - drm_mode->hsync_start);
> +	display_hctl = (hsync_end_x << 16) | hsync_start_x;
> +
> +
> +	dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
> +			hsync_period);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width *
> +			hsync_period);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
> +	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
> +	dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
> +	dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
> +
> +	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, DP_TPG_CHECKERED_RECT_PATTERN);
> +	dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
> +					DP_TPG_VIDEO_CONFIG_BPP_8BIT |
> +					DP_TPG_VIDEO_CONFIG_RGB);
> +	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
> +	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, DP_TIMING_ENGINE_EN_EN);
> +	DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
> +}
> +
> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog = container_of(dp_catalog,
> +				struct dp_catalog_private, dp_catalog);
> +
> +	dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
> +	dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
> +	return;
> +}
> +
> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io)
> +{
> +	int rc = 0;
> +	struct dp_catalog *dp_catalog;
> +	struct dp_catalog_private *catalog;
> +
> +	if (!io) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
> +	if (!catalog) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	catalog->dev = dev;
> +	catalog->io = io;
> +
> +	dp_catalog = &catalog->dp_catalog;
> +
> +	return dp_catalog;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_catalog_put(struct dp_catalog *dp_catalog)
> +{
> +	struct dp_catalog_private *catalog;
> +
> +	if (!dp_catalog)
> +		return;
> +
> +	catalog = container_of(dp_catalog, struct dp_catalog_private,
> +				dp_catalog);
> +
> +	devm_kfree(catalog->dev, catalog);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
> new file mode 100644
> index 0000000..51c82dd
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> @@ -0,0 +1,84 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_CATALOG_H_
> +#define _DP_CATALOG_H_
> +
> +#include "dp_parser.h"
> +
> +/* interrupts */
> +#define DP_INTR_HPD		BIT(0)
> +#define DP_INTR_AUX_I2C_DONE	BIT(3)
> +#define DP_INTR_WRONG_ADDR	BIT(6)
> +#define DP_INTR_TIMEOUT		BIT(9)
> +#define DP_INTR_NACK_DEFER	BIT(12)
> +#define DP_INTR_WRONG_DATA_CNT	BIT(15)
> +#define DP_INTR_I2C_NACK	BIT(18)
> +#define DP_INTR_I2C_DEFER	BIT(21)
> +#define DP_INTR_PLL_UNLOCKED	BIT(24)
> +#define DP_INTR_AUX_ERROR	BIT(27)
> +
> +#define DP_INTR_READY_FOR_VIDEO		BIT(0)
> +#define DP_INTR_IDLE_PATTERN_SENT	BIT(3)
> +#define DP_INTR_FRAME_END		BIT(6)
> +#define DP_INTR_CRC_UPDATED		BIT(9)
> +
> +struct dp_catalog {
> +	u32 aux_data;
> +	u32 total;
> +	u32 sync_start;
> +	u32 width_blanking;
> +	u32 dp_active;
> +};
> +
> +/* AUX APIs */
> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool read);
> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> +			struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> +			struct dp_aux_cfg *aux_cfg);
> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> +
> +/* DP Controller APIs */
> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32 config);
> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32 cc, u32 tb);
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32 rate,
> +				u32 stream_rate_khz, bool fixed_nvid);
> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32 pattern);
> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool flip);
> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool enable);
> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool flipped,
> +				u8 lane_cnt);
> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8 v_level,
> +				u8 p_level);
> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog *dp_catalog,
> +				u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> +				u32 pattern);
> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
> +
> +/* DP Panel APIs */
> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> +				struct drm_display_mode *drm_mode);
> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
> +
> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io *io);
> +void dp_catalog_put(struct dp_catalog *catalog);
> +
> +#endif /* _DP_CATALOG_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> new file mode 100644
> index 0000000..a4575ea
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -0,0 +1,1590 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/types.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <drm/drm_fixed.h>
> +
> +#include "dp_reg.h"
> +#include "dp_ctrl.h"
> +
> +#define DP_KHZ_TO_HZ 1000
> +#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES	(30 * HZ / 1000) /* 30 ms */
> +#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
> +
> +#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
> +#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
> +
> +#define MR_LINK_TRAINING1  0x8
> +#define MR_LINK_SYMBOL_ERM 0x80
> +#define MR_LINK_PRBS7 0x100
> +#define MR_LINK_CUSTOM80 0x200
> +
> +struct dp_tu_calc_input {
> +	u64 lclk;        /* 162, 270, 540 and 810 */
> +	u64 pclk_khz;    /* in KHz */
> +	u64 hactive;     /* active h-width */
> +	u64 hporch;      /* bp + fp + pulse */
> +	int nlanes;      /* no.of.lanes */
> +	int bpp;         /* bits */
> +	int pixel_enc;   /* 444, 420, 422 */
> +	int dsc_en;     /* dsc on/off */
> +	int async_en;   /* async mode */
> +};
> +
> +struct dp_vc_tu_mapping_table {
> +	u8 valid_boundary_link;
> +	u16 delay_start_link;
> +	bool boundary_moderation_en;
> +	u8 valid_lower_boundary_link;
> +	u8 upper_boundary_count;
> +	u8 lower_boundary_count;
> +	u8 tu_size_minus1;
> +};
> +
> +struct dp_ctrl_private {
> +	struct dp_ctrl dp_ctrl;
> +
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_panel *panel;
> +	struct dp_link *link;
> +	struct dp_power *power;
> +	struct dp_parser *parser;
> +	struct dp_catalog *catalog;
> +
> +	struct completion idle_comp;
> +	struct mutex push_idle_mutex;
> +	struct completion video_comp;
> +};
> +
> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	mutex_lock(&ctrl->push_idle_mutex);
> +
> +	reinit_completion(&ctrl->idle_comp);
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
> +
> +	if (!wait_for_completion_timeout(&ctrl->idle_comp,
> +			IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
> +		pr_warn("PUSH_IDLE pattern timedout\n");
> +
> +	mutex_unlock(&ctrl->push_idle_mutex);
> +	pr_debug("mainlink off done\n");
> +}
> +
> +static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
> +{
> +	u32 config = 0, tbd;
> +	u8 *dpcd = ctrl->panel->dpcd;
> +
> +	/* Default-> LSCLK DIV: 1/4 LCLK  */
> +	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
> +
> +	/* Scrambler reset enable */
> +	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
> +		config |= DP_CONFIGURATION_CTRL_ASSR;
> +
> +	tbd = dp_link_get_test_bits_depth(ctrl->link,
> +			ctrl->panel->dp_mode.bpp);
> +
> +	if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
> +		pr_debug("BIT_DEPTH not set. Configure default\n");
> +		tbd = DP_TEST_BIT_DEPTH_8;
> +	}
> +
> +	config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
> +
> +	/* Num of Lanes */
> +	config |= ((ctrl->link->link_params.num_lanes - 1)
> +			<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
> +
> +	if (drm_dp_enhanced_frame_cap(dpcd))
> +		config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
> +
> +	config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
> +
> +	/* sync clock & static Mvid */
> +	config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
> +	config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
> +
> +	dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
> +}
> +
> +/**
> + * dp_ctrl_configure_source_params() - configures DP transmitter source params
> + * @ctrl: Display Port Driver data
> + *
> + * Configures the DP transmitter source params including details such as lane
> + * configuration, output format and sink/panel timing information.
> + */
> +static void dp_ctrl_configure_source_params(struct dp_ctrl_private *ctrl)
> +{
> +	u32 cc, tb;
> +
> +	dp_catalog_ctrl_lane_mapping(ctrl->catalog);
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> +
> +	dp_ctrl_config_ctrl(ctrl);
> +
> +	tb = dp_link_get_test_bits_depth(ctrl->link,
> +		ctrl->panel->dp_mode.bpp);
> +	cc = dp_link_get_colorimetry_config(ctrl->link);
> +	dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
> +	dp_panel_timing_cfg(ctrl->panel);
> +}
> +
> +/*
> + * The structure and few functions present below are IP/Hardware
> + * specific implementation. Most of the implementation will not
> + * have coding comments
> + */
> +struct tu_algo_data {
> +	s64 lclk_fp;
> +	s64 pclk_fp;
> +	s64 lwidth;
> +	s64 hbp_relative_to_pclk;
> +	int nlanes;
> +	int bpp;
> +	int pixelEnc;
> +	int dsc_en;
> +	int async_en;
> +	int bpc;
> +
> +	uint delay_start_link_extra_pixclk;
> +	int extra_buffer_margin;
> +	s64 ratio_fp;
> +	s64 original_ratio_fp;
> +
> +	s64 err_fp;
> +	s64 n_err_fp;
> +	s64 n_n_err_fp;
> +	int tu_size;
> +	int tu_size_desired;
> +	int tu_size_minus1;
> +
> +	int valid_boundary_link;
> +	s64 resulting_valid_fp;
> +	s64 total_valid_fp;
> +	s64 effective_valid_fp;
> +	s64 effective_valid_recorded_fp;
> +	int n_tus;
> +	int n_tus_per_lane;
> +	int paired_tus;
> +	int remainder_tus;
> +	int remainder_tus_upper;
> +	int remainder_tus_lower;
> +	int extra_bytes;
> +	int filler_size;
> +	int delay_start_link;
> +
> +	int extra_pclk_cycles;
> +	int extra_pclk_cycles_in_link_clk;
> +	s64 ratio_by_tu_fp;
> +	s64 average_valid2_fp;
> +	int new_valid_boundary_link;
> +	int remainder_symbols_exist;
> +	int n_symbols;
> +	s64 n_remainder_symbols_per_lane_fp;
> +	s64 last_partial_tu_fp;
> +	s64 TU_ratio_err_fp;
> +
> +	int n_tus_incl_last_incomplete_tu;
> +	int extra_pclk_cycles_tmp;
> +	int extra_pclk_cycles_in_link_clk_tmp;
> +	int extra_required_bytes_new_tmp;
> +	int filler_size_tmp;
> +	int lower_filler_size_tmp;
> +	int delay_start_link_tmp;
> +
> +	bool boundary_moderation_en;
> +	int boundary_mod_lower_err;
> +	int upper_boundary_count;
> +	int lower_boundary_count;
> +	int i_upper_boundary_count;
> +	int i_lower_boundary_count;
> +	int valid_lower_boundary_link;
> +	int even_distribution_BF;
> +	int even_distribution_legacy;
> +	int even_distribution;
> +	int min_hblank_violated;
> +	s64 delay_start_time_fp;
> +	s64 hbp_time_fp;
> +	s64 hactive_time_fp;
> +	s64 diff_abs_fp;
> +
> +	s64 ratio;
> +};
> +
> +static int _tu_param_compare(s64 a, s64 b)
> +{
> +	u32 a_int, a_frac;
> +	u32 b_int, b_frac;
> +
> +	if (a == b)
> +		return 0;
> +
> +	a_int = (a >> 32) & 0x7FFFFFFF;
> +	a_frac = a & 0xFFFFFFFF;
> +
> +	b_int = (b >> 32) & 0x7FFFFFFF;
> +	b_frac = b & 0xFFFFFFFF;
> +
> +	if (a_int > b_int)
> +		return 1;
> +	else if (a_int < b_int)
> +		return 2;
> +	else if (a_frac > b_frac)
> +		return 1;
> +	else
> +		return 2;
> +}
> +
> +static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
> +{
> +	s64 temp1_fp, temp2_fp, temp, temp1, temp2;
> +	int compare_result_1, compare_result_2, compare_result_3;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +
> +	tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> +
> +	temp = (tu->i_upper_boundary_count *
> +				tu->new_valid_boundary_link +
> +				tu->i_lower_boundary_count *
> +				(tu->new_valid_boundary_link-1));
> +	tu->average_valid2_fp = drm_fixp_from_fraction(temp,
> +					(tu->i_upper_boundary_count +
> +					tu->i_lower_boundary_count));
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> +	tu->n_tus = drm_fixp2int(temp2_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu->n_remainder_symbols_per_lane_fp = temp2_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	tu->last_partial_tu_fp =
> +			drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
> +					temp1_fp);
> +
> +	if (tu->n_remainder_symbols_per_lane_fp != 0)
> +		tu->remainder_symbols_exist = 1;
> +	else
> +		tu->remainder_symbols_exist = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
> +	tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
> +
> +	tu->paired_tus = (int)((tu->n_tus_per_lane) /
> +					(tu->i_upper_boundary_count +
> +					 tu->i_lower_boundary_count));
> +
> +	tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
> +						(tu->i_upper_boundary_count +
> +						tu->i_lower_boundary_count);
> +
> +	if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
> +		tu->remainder_tus_upper = tu->i_upper_boundary_count;
> +		tu->remainder_tus_lower = tu->remainder_tus -
> +						tu->i_upper_boundary_count;
> +	} else {
> +		tu->remainder_tus_upper = tu->remainder_tus;
> +		tu->remainder_tus_lower = 0;
> +	}
> +
> +	temp = tu->paired_tus * (tu->i_upper_boundary_count *
> +				tu->new_valid_boundary_link +
> +				tu->i_lower_boundary_count *
> +				(tu->new_valid_boundary_link - 1)) +
> +				(tu->remainder_tus_upper *
> +				 tu->new_valid_boundary_link) +
> +				(tu->remainder_tus_lower *
> +				(tu->new_valid_boundary_link - 1));
> +	tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
> +
> +	if (tu->remainder_symbols_exist) {
> +		temp1_fp = tu->total_valid_fp +
> +				tu->n_remainder_symbols_per_lane_fp;
> +		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> +		temp2_fp = temp2_fp + tu->last_partial_tu_fp;
> +		temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
> +	} else {
> +		temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> +		temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
> +	}
> +	tu->effective_valid_fp = temp1_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +	tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> +	tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
> +
> +	tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +	temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> +
> +	if (temp2_fp)
> +		tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		tu->n_tus_incl_last_incomplete_tu = 0;
> +
> +	temp1 = 0;
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> +	temp1_fp = tu->average_valid2_fp - temp2_fp;
> +	temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	if (temp1_fp)
> +		temp1 = drm_fixp2int_ceil(temp1_fp);
> +
> +	temp = tu->i_upper_boundary_count * tu->nlanes;
> +	temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> +	temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(temp, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	if (temp2_fp)
> +		temp2 = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		temp2 = 0;
> +	tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
> +
> +	temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
> +	temp2_fp = drm_fixp_from_fraction(
> +	tu->extra_required_bytes_new_tmp, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	if (temp1_fp)
> +		tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu->extra_pclk_cycles_tmp = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
> +	temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
> +	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	if (temp1_fp)
> +		tu->extra_pclk_cycles_in_link_clk_tmp =
> +						drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu->extra_pclk_cycles_in_link_clk_tmp = 0;
> +
> +	tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
> +
> +	tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
> +
> +	tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
> +					tu->lower_filler_size_tmp +
> +					tu->extra_buffer_margin;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
> +	tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
> +
> +	compare_result_1 = _tu_param_compare(tu->n_n_err_fp, tu->diff_abs_fp);
> +	if (compare_result_1 == 2)
> +		compare_result_1 = 1;
> +	else
> +		compare_result_1 = 0;
> +
> +	compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
> +	if (compare_result_2 == 2)
> +		compare_result_2 = 1;
> +	else
> +		compare_result_2 = 0;
> +
> +	compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
> +					tu->delay_start_time_fp);
> +	if (compare_result_3 == 2)
> +		compare_result_3 = 0;
> +	else
> +		compare_result_3 = 1;
> +
> +	if (((tu->even_distribution == 1) ||
> +			((tu->even_distribution_BF == 0) &&
> +			(tu->even_distribution_legacy == 0))) &&
> +			tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
> +			compare_result_2 &&
> +			(compare_result_1 || (tu->min_hblank_violated == 1)) &&
> +			(tu->new_valid_boundary_link - 1) > 0 &&
> +			compare_result_3 &&
> +			(tu->delay_start_link_tmp <= 1023)) {
> +		tu->upper_boundary_count = tu->i_upper_boundary_count;
> +		tu->lower_boundary_count = tu->i_lower_boundary_count;
> +		tu->err_fp = tu->n_n_err_fp;
> +		tu->boundary_moderation_en = true;
> +		tu->tu_size_desired = tu->tu_size;
> +		tu->valid_boundary_link = tu->new_valid_boundary_link;
> +		tu->effective_valid_recorded_fp = tu->effective_valid_fp;
> +		tu->even_distribution_BF = 1;
> +		tu->delay_start_link = tu->delay_start_link_tmp;
> +	} else if (tu->boundary_mod_lower_err == 0) {
> +		compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
> +							tu->diff_abs_fp);
> +		if (compare_result_1 == 2)
> +			tu->boundary_mod_lower_err = 1;
> +	}
> +}
> +
> +static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
> +				   struct dp_vc_tu_mapping_table *tu_table)
> +{
> +	struct tu_algo_data tu;
> +	int compare_result_1, compare_result_2;
> +	u64 temp = 0;
> +	s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
> +
> +	s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006 */
> +	s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
> +	s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
> +	s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
> +
> +	u8 DP_BRUTE_FORCE = 1;
> +	s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1 */
> +	uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
> +	uint HBLANK_MARGIN = 4;
> +
> +	memset(&tu, 0, sizeof(tu));
> +
> +	tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
> +	tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
> +	tu.lwidth               = in->hactive;
> +	tu.hbp_relative_to_pclk = in->hporch;
> +	tu.nlanes               = in->nlanes;
> +	tu.bpp                  = in->bpp;
> +	tu.pixelEnc             = in->pixel_enc;
> +	tu.dsc_en               = in->dsc_en;
> +	tu.async_en             = in->async_en;
> +
> +	tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
> +
> +	if (tu.pixelEnc == 420) {
> +		temp_fp = drm_fixp_from_fraction(2, 1);
> +		tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
> +		tu.lwidth /= 2;
> +		tu.hbp_relative_to_pclk /= 2;
> +	}
> +
> +	if (tu.pixelEnc == 422) {
> +		switch (tu.bpp) {
> +		case 24:
> +			tu.bpp = 16;
> +			tu.bpc = 8;
> +			break;
> +		case 30:
> +			tu.bpp = 20;
> +			tu.bpc = 10;
> +			break;
> +		default:
> +			tu.bpp = 16;
> +			tu.bpc = 8;
> +			break;
> +		}
> +	} else {
> +		tu.bpc = tu.bpp/3;
> +	}
> +
> +	temp1_fp = drm_fixp_from_fraction(4, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
> +	temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
> +	tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
> +
> +	tu.original_ratio_fp = tu.ratio_fp;
> +	tu.boundary_moderation_en = false;
> +	tu.upper_boundary_count = 0;
> +	tu.lower_boundary_count = 0;
> +	tu.i_upper_boundary_count = 0;
> +	tu.i_lower_boundary_count = 0;
> +	tu.valid_lower_boundary_link = 0;
> +	tu.even_distribution_BF = 0;
> +	tu.even_distribution_legacy = 0;
> +	tu.even_distribution = 0;
> +	tu.delay_start_time_fp = 0;
> +
> +	tu.err_fp = drm_fixp_from_fraction(1000, 1);
> +	tu.n_err_fp = 0;
> +	tu.n_n_err_fp = 0;
> +
> +	tu.ratio = drm_fixp2int(tu.ratio_fp);
> +	if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
> +			!tu.ratio && tu.dsc_en == 0) {
> +		tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
> +		tu.ratio = drm_fixp2int(tu.ratio_fp);
> +		if (tu.ratio)
> +			tu.ratio_fp = drm_fixp_from_fraction(1, 1);
> +	}
> +
> +	if (tu.ratio > 1)
> +		tu.ratio = 1;
> +
> +	if (tu.ratio == 1)
> +		goto tu_size_calc;
> +
> +	compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
> +	if (!compare_result_1 || compare_result_1 == 1)
> +		compare_result_1 = 1;
> +	else
> +		compare_result_1 = 0;
> +
> +	compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
> +	if (!compare_result_2 || compare_result_2 == 2)
> +		compare_result_2 = 1;
> +	else
> +		compare_result_2 = 0;
> +
> +	if (tu.dsc_en && compare_result_1 && compare_result_2) {
> +		HBLANK_MARGIN += 4;
> +		DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
> +	}
> +
> +tu_size_calc:
> +	for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> +		temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
> +		temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +		temp = drm_fixp2int_ceil(temp2_fp);
> +		temp1_fp = drm_fixp_from_fraction(temp, 1);
> +		tu.n_err_fp = temp1_fp - temp2_fp;
> +
> +		if (tu.n_err_fp < tu.err_fp) {
> +			tu.err_fp = tu.n_err_fp;
> +			tu.tu_size_desired = tu.tu_size;
> +		}
> +	}
> +
> +	tu.tu_size_minus1 = tu.tu_size_desired - 1;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +	tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +	temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> +	tu.n_tus = drm_fixp2int(temp2_fp);
> +
> +	tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
> +	DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
> +		tu.valid_boundary_link, tu.n_tus);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +	temp2_fp = temp1_fp - temp2_fp;
> +	temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	temp = drm_fixp2int(temp2_fp);
> +	if (temp && temp2_fp)
> +		tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		tu.extra_bytes = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
> +	temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
> +	temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +
> +	temp = drm_fixp2int(temp1_fp);
> +	if (temp && temp1_fp)
> +		tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu.extra_pclk_cycles = 0;
> +
> +	temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> +	temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
> +	temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +	temp = drm_fixp2int(temp1_fp);
> +	if (temp && temp1_fp)
> +		tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
> +	else
> +		tu.extra_pclk_cycles_in_link_clk = 0;
> +
> +	tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> +
> +	tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
> +				tu.filler_size + tu.extra_buffer_margin;
> +
> +	tu.resulting_valid_fp =
> +			drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +	temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> +	tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> +
> +	temp1_fp = drm_fixp_from_fraction(
> +			(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
> +	tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> +	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> +
> +	compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
> +					tu.delay_start_time_fp);
> +	if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp) */
> +		tu.min_hblank_violated = 1;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> +
> +	compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
> +						tu.delay_start_time_fp);
> +	if (compare_result_2 == 2)
> +		tu.min_hblank_violated = 1;
> +
> +	tu.delay_start_time_fp = 0;
> +
> +	/* brute force */
> +
> +	tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
> +	tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
> +
> +	temp = drm_fixp2int(tu.diff_abs_fp);
> +	if (!temp && tu.diff_abs_fp <= 0xffff)
> +		tu.diff_abs_fp = 0;
> +
> +	/* if(diff_abs < 0) diff_abs *= -1 */
> +	if (tu.diff_abs_fp < 0)
> +		tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
> +
> +	tu.boundary_mod_lower_err = 0;
> +	if ((tu.diff_abs_fp != 0 &&
> +			((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
> +			 (tu.even_distribution_legacy == 0) ||
> +			 (DP_BRUTE_FORCE == 1))) ||
> +			(tu.min_hblank_violated == 1)) {
> +		do {
> +			tu.err_fp = drm_fixp_from_fraction(1000, 1);
> +
> +			temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> +			temp2_fp = drm_fixp_from_fraction(
> +					tu.delay_start_link_extra_pixclk, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +			if (temp1_fp)
> +				tu.extra_buffer_margin =
> +					drm_fixp2int_ceil(temp1_fp);
> +			else
> +				tu.extra_buffer_margin = 0;
> +
> +			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +
> +			if (temp1_fp)
> +				tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
> +			else
> +				tu.n_symbols = 0;
> +
> +			for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> +				for (tu.i_upper_boundary_count = 1;
> +					tu.i_upper_boundary_count <= 15;
> +					tu.i_upper_boundary_count++) {
> +					for (tu.i_lower_boundary_count = 1;
> +						tu.i_lower_boundary_count <= 15;
> +						tu.i_lower_boundary_count++) {
> +						_tu_valid_boundary_calc(&tu);
> +					}
> +				}
> +			}
> +			tu.delay_start_link_extra_pixclk--;
> +		} while (tu.boundary_moderation_en != true &&
> +			tu.boundary_mod_lower_err == 1 &&
> +			tu.delay_start_link_extra_pixclk != 0);
> +
> +		if (tu.boundary_moderation_en == true) {
> +			temp1_fp = drm_fixp_from_fraction(
> +					(tu.upper_boundary_count *
> +					tu.valid_boundary_link +
> +					tu.lower_boundary_count *
> +					(tu.valid_boundary_link - 1)), 1);
> +			temp2_fp = drm_fixp_from_fraction(
> +					(tu.upper_boundary_count +
> +					tu.lower_boundary_count), 1);
> +			tu.resulting_valid_fp =
> +					drm_fixp_div(temp1_fp, temp2_fp);
> +
> +			temp1_fp = drm_fixp_from_fraction(
> +					tu.tu_size_desired, 1);
> +			tu.ratio_by_tu_fp =
> +				drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +
> +			tu.valid_lower_boundary_link =
> +				tu.valid_boundary_link - 1;
> +
> +			temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +			temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +			temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> +			temp2_fp = drm_fixp_div(temp1_fp,
> +						tu.resulting_valid_fp);
> +			tu.n_tus = drm_fixp2int(temp2_fp);
> +
> +			tu.tu_size_minus1 = tu.tu_size_desired - 1;
> +			tu.even_distribution_BF = 1;
> +
> +			temp1_fp =
> +				drm_fixp_from_fraction(tu.tu_size_desired, 1);
> +			temp2_fp =
> +				drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> +			tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> +		}
> +	}
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> +	temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
> +
> +	if (temp2_fp)
> +		temp = drm_fixp2int_ceil(temp2_fp);
> +	else
> +		temp = 0;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> +	temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> +	temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> +	temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
> +	temp1_fp = drm_fixp_from_fraction(temp, 1);
> +	temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> +	temp = drm_fixp2int(temp2_fp);
> +
> +	if (tu.async_en)
> +		tu.delay_start_link += (int)temp;
> +
> +	temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> +	tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> +
> +	/* OUTPUTS */
> +	tu_table->valid_boundary_link       = tu.valid_boundary_link;
> +	tu_table->delay_start_link          = tu.delay_start_link;
> +	tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
> +	tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
> +	tu_table->upper_boundary_count      = tu.upper_boundary_count;
> +	tu_table->lower_boundary_count      = tu.lower_boundary_count;
> +	tu_table->tu_size_minus1            = tu.tu_size_minus1;
> +
> +	DRM_DEBUG_DP("TU: valid_boundary_link: %d\n", tu_table->valid_boundary_link);
> +	DRM_DEBUG_DP("TU: delay_start_link: %d\n", tu_table->delay_start_link);
> +	DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
> +			tu_table->boundary_moderation_en);
> +	DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
> +			tu_table->valid_lower_boundary_link);
> +	DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
> +			tu_table->upper_boundary_count);
> +	DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
> +			tu_table->lower_boundary_count);
> +	DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
> +}
> +
> +static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
> +		struct dp_vc_tu_mapping_table *tu_table)
> +{
> +	struct dp_tu_calc_input in;
> +	struct drm_display_mode *drm_mode;
> +
> +	drm_mode = &ctrl->panel->dp_mode.drm_mode;
> +
> +	in.lclk = ctrl->link->link_params.rate / 1000;
> +	in.pclk_khz = drm_mode->clock;
> +	in.hactive = drm_mode->hdisplay;
> +	in.hporch = drm_mode->htotal - drm_mode->hdisplay;
> +	in.nlanes = ctrl->link->link_params.num_lanes;
> +	in.bpp = ctrl->panel->dp_mode.bpp;
> +	in.pixel_enc = 444;
> +	in.dsc_en = 0;
> +	in.async_en = 0;
> +
> +	_dp_ctrl_calc_tu(&in, tu_table);
> +}
> +
> +static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
> +{
> +	u32 dp_tu = 0x0;
> +	u32 valid_boundary = 0x0;
> +	u32 valid_boundary2 = 0x0;
> +	struct dp_vc_tu_mapping_table tu_calc_table;
> +
> +	dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
> +
> +	dp_tu |= tu_calc_table.tu_size_minus1;
> +	valid_boundary |= tu_calc_table.valid_boundary_link;
> +	valid_boundary |= (tu_calc_table.delay_start_link << 16);
> +
> +	valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
> +	valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
> +	valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
> +
> +	if (tu_calc_table.boundary_moderation_en)
> +		valid_boundary2 |= BIT(0);
> +
> +	pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
> +			dp_tu, valid_boundary, valid_boundary2);
> +
> +	dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
> +				dp_tu, valid_boundary, valid_boundary2);
> +}
> +
> +static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	if (!wait_for_completion_timeout(&ctrl->video_comp,
> +				WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
> +		DRM_ERROR("Link Train timedout\n");
> +		ret = -ETIMEDOUT;
> +	}
> +	return ret;
> +}
> +
> +static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
> +{
> +	struct dp_link *link = ctrl->link;
> +	int ret = 0, lane, lane_cnt;
> +	u8 buf[4];
> +	u32 max_level_reached = 0;
> +	u32 voltage_swing_level = link->phy_params.v_level;
> +	u32 pre_emphasis_level = link->phy_params.p_level;
> +
> +	ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> +		voltage_swing_level, pre_emphasis_level);
> +	if (ret)
> +		return ret;
> +
> +	if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +		DRM_DEBUG_DP("max. voltage swing level reached %d\n",
> +				voltage_swing_level);
> +		max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
> +	}
> +
> +	if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
> +		DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
> +				pre_emphasis_level);
> +		max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
> +	}
> +
> +	pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
> +
> +	lane_cnt = ctrl->link->link_params.num_lanes;
> +	for (lane = 0; lane < lane_cnt; lane++)
> +		buf[lane] = voltage_swing_level | pre_emphasis_level | max_level_reached;
> +
> +	DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level | pre_emphasis_level);
> +	ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET, buf, lane_cnt);
> +	if (ret == lane_cnt)
> +		ret = 0;
> +
> +	return ret;
> +}
> +
> +static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
> +		u8 pattern)
> +{
> +	u8 buf;
> +	int ret = 0;
> +
> +	DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
> +
> +	buf = pattern;
> +	ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET, buf);
> +	return ret == 1;
> +}
> +
> +static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
> +				    u8 *link_status)
> +{
> +	int len = 0;
> +	u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
> +	u32 link_status_read_max_retries = 100;
> +
> +	while (--link_status_read_max_retries) {
> +		len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
> +			link_status);
> +		if (len != DP_LINK_STATUS_SIZE) {
> +			DRM_ERROR("DP link status read failed, err: %d\n", len);
> +			return len;
> +		}
> +
> +		if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
> +			return 0;
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
> +{
> +	int tries, old_v_level, ret = 0;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +	int const maximum_retries = 5;
> +
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, DP_TRAINING_PATTERN_1);
> +	if (ret)
> +		return ret;
> +	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
> +		DP_LINK_SCRAMBLING_DISABLE);
> +	ret = dp_ctrl_update_vx_px(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	tries = 0;
> +	old_v_level = ctrl->link->phy_params.v_level;
> +	for (tries = 0; tries < maximum_retries; tries++) {
> +		drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
> +
> +		ret = dp_ctrl_read_link_status(ctrl, link_status);
> +		if (ret)
> +			return ret;
> +
> +		if (drm_dp_clock_recovery_ok(link_status,
> +			ctrl->link->link_params.num_lanes)) {
> +			return ret;
> +		}
> +
> +		if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +			DRM_ERROR_RATELIMITED("max v_level reached\n");
> +			return -EAGAIN;
> +		}
> +
> +		if (old_v_level != ctrl->link->phy_params.v_level) {
> +			tries = 0;
> +			old_v_level = ctrl->link->phy_params.v_level;
> +		}
> +
> +		DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
> +
> +		dp_link_adjust_levels(ctrl->link, link_status);
> +		ret = dp_ctrl_update_vx_px(ctrl);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	DRM_ERROR("max tries reached\n");
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	switch (ctrl->link->link_params.rate) {
> +	case 810000:
> +		ctrl->link->link_params.rate = 540000;
> +		break;
> +	case 540000:
> +		ctrl->link->link_params.rate = 270000;
> +		break;
> +	case 270000:
> +	case 162000:
> +	default:
> +		ctrl->link->link_params.rate = 162000;
> +		break;
> +	};
> +
> +	DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
> +
> +	return ret;
> +}
> +
> +static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
> +{
> +	dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
> +	drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> +}
> +
> +static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
> +{
> +	int tries = 0, ret = 0;
> +	char pattern;
> +	int const maximum_retries = 5;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	if (drm_dp_tps3_supported(ctrl->panel->dpcd))
> +		pattern = DP_TRAINING_PATTERN_3;
> +	else
> +		pattern = DP_TRAINING_PATTERN_2;
> +
> +	ret = dp_ctrl_update_vx_px(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
> +	if (ret)
> +		return ret;
> +
> +	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
> +
> +	for (tries = 0; tries <= maximum_retries; tries++) {
> +		drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> +
> +		ret = dp_ctrl_read_link_status(ctrl, link_status);
> +		if (ret)
> +			return ret;
> +
> +		if (drm_dp_channel_eq_ok(link_status,
> +			ctrl->link->link_params.num_lanes))
> +			return ret;
> +
> +		dp_link_adjust_levels(ctrl->link, link_status);
> +		ret = dp_ctrl_update_vx_px(ctrl);
> +		if (ret)
> +			return ret;
> +
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +	u8 encoding = DP_SET_ANSI_8B10B;
> +	struct drm_dp_link link_info = {0};
> +
> +	ctrl->link->phy_params.p_level = 0;
> +	ctrl->link->phy_params.v_level = 0;
> +
> +	dp_ctrl_config_ctrl(ctrl);
> +
> +	ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
> +		dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +		return ret;
> +	}
> +
> +	drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
> +	drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
> +				&encoding, 1);
> +
> +	ret = dp_ctrl_link_train_1(ctrl);
> +	if (ret) {
> +		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
> +		goto end;
> +	}
> +
> +	/* print success info as this is a result of user initiated action */
> +	DRM_DEBUG_DP("link training #1 successful\n");
> +
> +	ret = dp_ctrl_link_training_2(ctrl);
> +	if (ret) {
> +		DRM_ERROR("link training #2 failed. ret=%d\n", ret);
> +		goto end;
> +	}
> +
> +	/* print success info as this is a result of user initiated action */
> +	DRM_DEBUG_DP("link training #2 successful\n");
> +
> +end:
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> +
> +	dp_ctrl_clear_training_pattern(ctrl);
> +	return ret;
> +}
> +
> +static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool train)
> +{
> +	bool mainlink_ready = false;
> +	int ret = 0;
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> +
> +	ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
> +	if (ret)
> +		return ret;
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> +		return ret;
> +
> +	if (train) {
> +		/*
> +		 * As part of previous calls, DP controller state might have
> +		 * transitioned to PUSH_IDLE. In order to start transmitting a link
> +		 * training pattern, we have to first do a DP software reset.
> +		 */
> +		dp_catalog_ctrl_reset(ctrl->catalog);
> +
> +		ret = dp_ctrl_link_train(ctrl);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/*
> +	 * Set up transfer unit values and set controller state to send
> +	 * video.
> +	 */
> +	dp_ctrl_setup_tr_unit(ctrl);
> +	dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
> +
> +	ret = dp_ctrl_wait4video_ready(ctrl);
> +	if (ret)
> +		return ret;
> +
> +	mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
> +	DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT READY");
> +	return ret;
> +}
> +
> +static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
> +				   char *name, u32 rate)
> +{
> +	u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
> +	struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
> +
> +	while (num && strcmp(cfg->clk_name, name)) {
> +		num--;
> +		cfg++;
> +	}
> +
> +	DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
> +
> +	if (num)
> +		cfg->rate = rate;
> +	else
> +		DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
> +}
> +
> +static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	dp_power_set_link_clk_parent(ctrl->power);
> +	dp_power_set_pixel_clk_parent(ctrl->power);
> +
> +	dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk", ctrl->link->link_params.rate);
> +
> +	dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk", ctrl->dp_ctrl.pixel_rate);
> +
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
> +	if (ret)
> +		DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
> +
> +	return ret;
> +}
> +
> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("Invalid input data\n");
> +		return -EINVAL;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	ctrl->dp_ctrl.orientation = flip;
> +
> +	dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
> +	dp_catalog_ctrl_phy_reset(ctrl->catalog);
> +	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_ctrl_host_deinit() - Uninitialize DP controller
> + * @ctrl: Display Port Driver data
> + *
> + * Perform required steps to uninitialize DP controller
> + * and its resources.
> + */
> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("Invalid input data\n");
> +		return;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
> +
> +	DRM_DEBUG_DP("Host deinitialized successfully\n");
> +}
> +
> +static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
> +{
> +	u8 *dpcd = ctrl->panel->dpcd;
> +
> +	/*
> +	 * For better interop experience, used a fixed NVID=0x8000
> +	 * whenever connected to a VGA dongle downstream.
> +	 */
> +	if (drm_dp_is_branch(dpcd))
> +		return (drm_dp_has_quirk(&ctrl->panel->desc,
> +				DP_DPCD_QUIRK_CONSTANT_N));
> +
> +	return false;
> +}
> +
> +static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> +	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> +		ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> +	/*
> +	 * Disable and re-enable the mainlink clock since the
> +	 * link clock might have been adjusted as part of the
> +	 * link maintenance.
> +	 */
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> +	if (ret) {
> +		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> +		return ret;
> +	}
> +	/* hw recommended delay before re-enabling clocks */
> +	msleep(20);
> +
> +	ret = dp_ctrl_enable_mainlink_clocks(ctrl);
> +	if (ret) {
> +		DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	dp_ctrl_configure_source_params(ctrl);
> +	dp_catalog_ctrl_config_msa(ctrl->catalog,
> +		ctrl->link->link_params.rate,
> +		ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
> +	reinit_completion(&ctrl->idle_comp);
> +
> +	return ret;
> +}
> +
> +static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +	int tries, max_tries = 10;
> +
> +	dp_ctrl_push_idle(&ctrl->dp_ctrl);
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +
> +	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> +
> +	for (tries = 0; tries < max_tries; tries++) {
> +		ret = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (ret) {
> +			DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
> +			break;
> +		}
> +
> +		ret = dp_ctrl_setup_main_link(ctrl, true);
> +		if (ret == -EAGAIN) /* try with lower link rate */
> +			dp_ctrl_link_rate_down_shift(ctrl);
> +	}
> +	return ret;
> +}
> +
> +static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
> +{
> +	int ret = 0;
> +
> +	if (!ctrl->link->phy_params.phy_test_pattern_sel) {
> +		DRM_DEBUG_DP("no test pattern selected by sink\n");
> +		return ret;
> +	}
> +
> +	dp_ctrl_push_idle(&ctrl->dp_ctrl);
> +	/*
> +	 * The global reset will need DP link related clocks to be
> +	 * running. Add the global reset just before disabling the
> +	 * link clocks and core clocks.
> +	 */
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +	ret = dp_ctrl_off(&ctrl->dp_ctrl);
> +	if (ret) {
> +		DRM_ERROR("failed to disable DP controller\n");
> +		return ret;
> +	}
> +
> +	ret = dp_ctrl_on(&ctrl->dp_ctrl);
> +	if (ret)
> +		DRM_ERROR("failed to enable DP controller\n");
> +
> +	return ret;
> +}
> +
> +static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private *ctrl)
> +{
> +	bool success = false;
> +	u32 pattern_sent = 0x0;
> +	u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
> +
> +	DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
> +
> +	if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> +			ctrl->link->phy_params.v_level,
> +			ctrl->link->phy_params.p_level)) {
> +		DRM_ERROR("Failed to set v/p levels\n");
> +		return false;
> +	}
> +	dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
> +	dp_link_send_test_response(ctrl->link);
> +
> +	pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
> +
> +	switch (pattern_sent) {
> +	case MR_LINK_TRAINING1:
> +		success = pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_D10_2;
> +		break;
> +	case MR_LINK_SYMBOL_ERM:
> +		success = (pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_ERROR_RATE)
> +			|| (pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_HBR2_EYE);
> +		break;
> +	case MR_LINK_PRBS7:
> +		success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
> +		break;
> +	case MR_LINK_CUSTOM80:
> +		success = pattern_requested ==
> +				DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
> +		break;
> +	default:
> +		success = false;
> +	}
> +
> +	DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
> +						pattern_requested);
> +	return success;
> +}
> +
> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	u32 sink_request = 0x0;
> +
> +	if (!dp_ctrl) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +	sink_request = ctrl->link->sink_request;
> +
> +	if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
> +		if (dp_ctrl_process_phy_test_request(ctrl)) {
> +			DRM_ERROR("process phy_test_req failed\n");
> +			return;
> +		}
> +	}
> +
> +	if (sink_request & DP_LINK_STATUS_UPDATED)
> +		if (dp_ctrl_link_maintenance(ctrl)) {
> +			DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
> +			return;
> +		}
> +
> +
> +	if (sink_request & DP_TEST_LINK_TRAINING) {
> +		dp_link_send_test_response(ctrl->link);
> +		if (dp_ctrl_link_maintenance(ctrl)) {
> +			DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
> +			return;
> +		}
> +	}
> +}
> +
> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
> +{
> +	int rc = 0;
> +	struct dp_ctrl_private *ctrl;
> +	u32 rate = 0;
> +	u32 link_train_max_retries = 10;
> +	u32 const phy_cts_pixel_clk_khz = 148500;
> +
> +	if (!dp_ctrl)
> +		return -EINVAL;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	rate = ctrl->panel->link_info.rate;
> +
> +	dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
> +	dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		DRM_DEBUG_DP("using phy test link parameters\n");
> +		if (!ctrl->panel->dp_mode.drm_mode.clock)
> +			ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
> +	} else {
> +		ctrl->link->link_params.rate = rate;
> +		ctrl->link->link_params.num_lanes =
> +			ctrl->panel->link_info.num_lanes;
> +		ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> +	}
> +
> +	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
> +		ctrl->link->link_params.rate,
> +		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
> +
> +	dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> +			ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> +
> +	rc = dp_ctrl_enable_mainlink_clocks(ctrl);
> +	if (rc)
> +		return rc;
> +
> +	while (--link_train_max_retries && !atomic_read(&ctrl->dp_ctrl.aborted)) {
> +		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (rc) {
> +			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
> +			break;
> +		}
> +		rc = dp_ctrl_setup_main_link(ctrl, true);
> +		if (!rc)
> +			break;
> +		/* try with lower link rate */
> +		dp_ctrl_link_rate_down_shift(ctrl);
> +	}
> +
> +	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> +		dp_ctrl_send_phy_test_pattern(ctrl);
> +
> +	return rc;
> +}
> +
> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	int ret = 0;
> +
> +	if (!dp_ctrl)
> +		return -EINVAL;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> +	dp_catalog_ctrl_reset(ctrl->catalog);
> +	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> +	if (ret) {
> +		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	DRM_DEBUG_DP("DP off done\n");
> +	return ret;
> +}
> +
> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +	u32 isr;
> +
> +	if (!dp_ctrl)
> +		return;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
> +
> +	if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
> +		DRM_DEBUG_DP("dp_video_ready\n");
> +		complete(&ctrl->video_comp);
> +	}
> +
> +	if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
> +		DRM_DEBUG_DP("idle_patterns_sent\n");
> +		complete(&ctrl->idle_comp);
> +	}
> +}
> +
> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
> +			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
> +			struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct dp_ctrl_private *ctrl;
> +	struct dp_ctrl *dp_ctrl;
> +
> +	if (!dev || !panel || !aux ||
> +	    !link || !catalog) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +	if (!ctrl) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	init_completion(&ctrl->idle_comp);
> +	init_completion(&ctrl->video_comp);
> +	mutex_init(&ctrl->push_idle_mutex);
> +
> +	/* in parameters */
> +	ctrl->parser   = parser;
> +	ctrl->panel    = panel;
> +	ctrl->power    = power;
> +	ctrl->aux      = aux;
> +	ctrl->link     = link;
> +	ctrl->catalog  = catalog;
> +	ctrl->dev      = dev;
> +
> +	dp_ctrl = &ctrl->dp_ctrl;
> +
> +	return dp_ctrl;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
> +{
> +	struct dp_ctrl_private *ctrl;
> +
> +	if (!dp_ctrl)
> +		return;
> +
> +	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> +	mutex_destroy(&ctrl->push_idle_mutex);
> +
> +	devm_kfree(ctrl->dev, ctrl);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> new file mode 100644
> index 0000000..99ab4b2
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_CTRL_H_
> +#define _DP_CTRL_H_
> +
> +#include "dp_aux.h"
> +#include "dp_panel.h"
> +#include "dp_link.h"
> +#include "dp_parser.h"
> +#include "dp_power.h"
> +#include "dp_catalog.h"
> +
> +struct dp_ctrl {
> +	bool orientation;
> +	atomic_t aborted;
> +	u32 pixel_rate;
> +};
> +
> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel,
> +			struct dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog,
> +			struct dp_parser *parser);
> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
> +
> +#endif /* _DP_CTRL_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> new file mode 100644
> index 0000000..a893542
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -0,0 +1,949 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/debugfs.h>
> +#include <linux/component.h>
> +#include <linux/of_irq.h>
> +
> +#include "msm_drv.h"
> +#include "msm_kms.h"
> +#include "dp_extcon.h"
> +#include "dp_parser.h"
> +#include "dp_power.h"
> +#include "dp_catalog.h"
> +#include "dp_aux.h"
> +#include "dp_link.h"
> +#include "dp_panel.h"
> +#include "dp_ctrl.h"
> +#include "dp_display.h"
> +#include "dp_drm.h"
> +
> +static struct msm_dp *g_dp_display;
> +#define HPD_STRING_SIZE 30
> +
> +struct dp_display_private {
> +	char *name;
> +	int irq;
> +
> +	/* state variables */
> +	bool core_initialized;
> +	bool power_on;
> +	bool hpd_irq_on;
> +	bool audio_supported;
> +
> +	struct platform_device *pdev;
> +	struct dentry *root;
> +	struct completion notification_comp;
> +
> +	struct dp_usbpd   *usbpd;
> +	struct dp_parser  *parser;
> +	struct dp_power   *power;
> +	struct dp_catalog *catalog;
> +	struct dp_aux     *aux;
> +	struct dp_link    *link;
> +	struct dp_panel   *panel;
> +	struct dp_ctrl    *ctrl;
> +
> +	struct dp_usbpd_cb usbpd_cb;
> +	struct dp_display_mode dp_mode;
> +	struct msm_dp dp_display;
> +};
> +
> +static const struct of_device_id dp_dt_match[] = {
> +	{.compatible = "qcom,dp-display"},
> +	{}
> +};
> +
> +static irqreturn_t dp_display_irq(int irq, void *dev_id)
> +{
> +	struct dp_display_private *dp = dev_id;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid data\n");
> +		return IRQ_NONE;
> +	}
> +
> +	/* DP controller isr */
> +	dp_ctrl_isr(dp->ctrl);
> +
> +	/* DP aux isr */
> +	dp_aux_isr(dp->aux);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int dp_display_bind(struct device *dev, struct device *master,
> +			   void *data)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +	struct drm_device *drm;
> +	struct msm_drm_private *priv;
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	if (!dev || !pdev || !master) {
> +		DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
> +				dev, pdev, master);
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	drm = dev_get_drvdata(master);
> +	dp = platform_get_drvdata(pdev);
> +	if (!drm || !dp) {
> +		DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
> +				drm, dp);
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp->dp_display.drm_dev = drm;
> +	priv = drm->dev_private;
> +	priv->dp = &(dp->dp_display);
> +
> +	rc = dp->parser->parse(dp->parser);
> +	if (rc) {
> +		DRM_ERROR("device tree parsing failed\n");
> +		goto end;
> +	}
> +
> +	rc = dp_aux_register(dp->aux);
> +	if (rc) {
> +		DRM_ERROR("DRM DP AUX register failed\n");
> +		goto end;
> +	}
> +
> +	rc = dp_power_client_init(dp->power);
> +	if (rc) {
> +		DRM_ERROR("Power client create failed\n");
> +		goto end;
> +	}
> +
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_unbind(struct device *dev, struct device *master,
> +			      void *data)
> +{
> +	struct dp_display_private *dp;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct drm_device *drm = dev_get_drvdata(master);
> +	struct msm_drm_private *priv = drm->dev_private;
> +
> +	if (!dev || !pdev) {
> +		DRM_ERROR("invalid param(s)\n");
> +		return;
> +	}
> +
> +	dp = platform_get_drvdata(pdev);
> +	if (!dp) {
> +		DRM_ERROR("Invalid params\n");
> +		return;
> +	}
> +
> +	(void)dp_power_client_deinit(dp->power);
> +	(void)dp_aux_unregister(dp->aux);
> +	priv->dp = NULL;
> +}
> +
> +static const struct component_ops dp_display_comp_ops = {
> +	.bind = dp_display_bind,
> +	.unbind = dp_display_unbind,
> +};
> +
> +static bool dp_display_is_ds_bridge(struct dp_panel *panel)
> +{
> +	return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> +		DP_DWN_STRM_PORT_PRESENT);
> +}
> +
> +static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
> +{
> +	return dp_display_is_ds_bridge(dp->panel) &&
> +		(dp->link->sink_count == 0);
> +}
> +
> +static void dp_display_send_hpd_event(struct msm_dp *dp_display)
> +{
> +	struct dp_display_private *dp;
> +	struct drm_connector *connector;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	connector = dp->dp_display.connector;
> +	drm_helper_hpd_irq_event(connector->dev);
> +}
> +
> +static int dp_display_send_hpd_notification(struct dp_display_private *dp,
> +					    bool hpd)
> +{
> +	static bool encoder_mode_set = false;
> +	struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
> +	struct msm_kms *kms = priv->kms;
> +
> +	mutex_lock(&dp->dp_display.connect_mutex);
> +	if ((hpd && dp->dp_display.is_connected) ||
> +			(!hpd && !dp->dp_display.is_connected)) {
> +		DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
> +		mutex_unlock(&dp->dp_display.connect_mutex);
> +		return 0;
> +	}
> +
> +	/* reset video pattern flag on disconnect */
> +	if (!hpd)
> +		dp->panel->video_test = false;
> +
> +	dp->dp_display.is_connected = hpd;
> +	reinit_completion(&dp->notification_comp);
> +
> +	if (dp->dp_display.is_connected && dp->dp_display.encoder
> +				&& !encoder_mode_set
> +				&& kms->funcs->set_encoder_mode) {
> +		kms->funcs->set_encoder_mode(kms,
> +				dp->dp_display.encoder, false);
> +		DRM_DEBUG_DP("set_encoder_mode() Completed\n");
> +		encoder_mode_set = true;
> +	}
> +
> +	dp_display_send_hpd_event(&dp->dp_display);
> +
> +	if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
> +		pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
> +		mutex_unlock(&dp->dp_display.connect_mutex);
> +		return -EINVAL;
> +	}
> +
> +	mutex_unlock(&dp->dp_display.connect_mutex);
> +	return 0;
> +}
> +
> +static int dp_display_process_hpd_high(struct dp_display_private *dp)
> +{
> +	int rc = 0;
> +	struct edid *edid;
> +
> +	dp_aux_init(dp->aux, dp->parser->aux_cfg);
> +
> +	if (dp->link->psm_enabled)
> +		goto notify;
> +
> +	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
> +	if (rc)
> +		goto notify;
> +
> +	dp_link_process_request(dp->link);
> +
> +	if (dp_display_is_sink_count_zero(dp)) {
> +		DRM_DEBUG_DP("no downstream devices connected\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	edid = dp->panel->edid;
> +
> +	dp->audio_supported = drm_detect_monitor_audio(edid);
> +
> +	dp_panel_handle_sink_request(dp->panel);
> +
> +	dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
> +notify:
> +	dp_display_send_hpd_notification(dp, true);
> +
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_host_init(struct dp_display_private *dp)
> +{
> +	bool flip = false;
> +
> +	if (dp->core_initialized) {
> +		DRM_DEBUG_DP("DP core already initialized\n");
> +		return;
> +	}
> +
> +	if (dp->usbpd->orientation == ORIENTATION_CC2)
> +		flip = true;
> +
> +	dp_power_init(dp->power, flip);
> +	dp_ctrl_host_init(dp->ctrl, flip);
> +	enable_irq(dp->irq);
> +	dp->core_initialized = true;
> +}
> +
> +static void dp_display_host_deinit(struct dp_display_private *dp)
> +{
> +	if (!dp->core_initialized) {
> +		DRM_DEBUG_DP("DP core already off\n");
> +		return;
> +	}
> +
> +	dp_ctrl_host_deinit(dp->ctrl);
> +	dp_aux_deinit(dp->aux);
> +	dp_power_deinit(dp->power);
> +	disable_irq(dp->irq);
> +	dp->core_initialized = false;
> +}
> +
> +static void dp_display_process_hpd_low(struct dp_display_private *dp)
> +{
> +	dp_display_send_hpd_notification(dp, false);
> +
> +	dp_aux_deinit(dp->aux);
> +}
> +
> +static int dp_display_usbpd_configure_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		rc = -ENODEV;
> +		goto end;
> +	}
> +
> +	dp_display_host_init(dp);
> +
> +	if (dp->usbpd->hpd_high)
> +		dp_display_process_hpd_high(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_clean(struct dp_display_private *dp)
> +{
> +	dp_ctrl_push_idle(dp->ctrl);
> +	dp_ctrl_off(dp->ctrl);
> +}
> +
> +static int dp_display_usbpd_disconnect_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		rc = -EINVAL;
> +		goto end;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		rc = -ENODEV;
> +		goto end;
> +	}
> +
> +	rc = dp_display_send_hpd_notification(dp, false);
> +
> +	/* if cable is disconnected, reset psm_enabled flag */
> +	if (!dp->usbpd->alt_mode_cfg_done)
> +		dp->link->psm_enabled = false;
> +
> +	if ((rc < 0) && dp->power_on)
> +		dp_display_clean(dp);
> +
> +	dp_display_host_deinit(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_handle_video_request(struct dp_display_private *dp)
> +{
> +	if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
> +		/* force disconnect followed by connect */
> +		dp->usbpd->connect(dp->usbpd, false);
> +		dp->panel->video_test = true;
> +		dp->usbpd->connect(dp->usbpd, true);
> +		dp_link_send_test_response(dp->link);
> +	}
> +}
> +
> +static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
> +{
> +	if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
> +		dp_display_send_hpd_notification(dp, false);
> +
> +		if (dp_display_is_sink_count_zero(dp)) {
> +			DRM_DEBUG_DP("sink count is zero, nothing to do\n");
> +			return 0;
> +		}
> +
> +		return dp_display_process_hpd_high(dp);
> +	}
> +
> +	dp_ctrl_handle_sink_request(dp->ctrl);
> +
> +	dp_display_handle_video_request(dp);
> +
> +	return 0;
> +}
> +
> +static int dp_display_usbpd_attention_cb(struct device *dev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dev) {
> +		DRM_ERROR("invalid dev\n");
> +		return -EINVAL;
> +	}
> +
> +	dp = dev_get_drvdata(dev);
> +	if (!dp) {
> +		DRM_ERROR("no driver data found\n");
> +		return -ENODEV;
> +	}
> +
> +	if (dp->usbpd->hpd_irq) {
> +		dp->hpd_irq_on = true;
> +
> +		rc = dp_link_process_request(dp->link);
> +		/* check for any test request issued by sink */
> +		if (!rc)
> +			dp_display_handle_hpd_irq(dp);
> +
> +		dp->hpd_irq_on = false;
> +		goto end;
> +	}
> +
> +	if (!dp->usbpd->hpd_high) {
> +		dp_display_process_hpd_low(dp);
> +		goto end;
> +	}
> +
> +	if (dp->usbpd->alt_mode_cfg_done)
> +		dp_display_process_hpd_high(dp);
> +end:
> +	return rc;
> +}
> +
> +static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
> +{
> +	dp_ctrl_put(dp->ctrl);
> +	dp_link_put(dp->link);
> +	dp_panel_put(dp->panel);
> +	dp_aux_put(dp->aux);
> +	dp_power_put(dp->power);
> +	dp_catalog_put(dp->catalog);
> +	dp_parser_put(dp->parser);
> +}
> +
> +static int dp_init_sub_modules(struct dp_display_private *dp)
> +{
> +	int rc = 0;
> +	struct device *dev = &dp->pdev->dev;
> +	struct dp_usbpd_cb *cb = &dp->usbpd_cb;
> +	struct dp_panel_in panel_in = {
> +		.dev = dev,
> +	};
> +
> +	/* Callback APIs used for cable status change event */
> +	cb->configure  = dp_display_usbpd_configure_cb;
> +	cb->disconnect = dp_display_usbpd_disconnect_cb;
> +	cb->attention  = dp_display_usbpd_attention_cb;
> +
> +	dp->parser = dp_parser_get(dp->pdev);
> +	if (IS_ERR(dp->parser)) {
> +		rc = PTR_ERR(dp->parser);
> +		DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
> +		dp->parser = NULL;
> +		goto error_parser;
> +	}
> +
> +	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
> +	if (IS_ERR(dp->catalog)) {
> +		rc = PTR_ERR(dp->catalog);
> +		DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
> +		dp->catalog = NULL;
> +		goto error_catalog;
> +	}
> +
> +	dp->power = dp_power_get(dp->parser);
> +	if (IS_ERR(dp->power)) {
> +		rc = PTR_ERR(dp->power);
> +		DRM_ERROR("failed to initialize power, rc = %d\n", rc);
> +		dp->power = NULL;
> +		goto error_power;
> +	}
> +
> +	dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
> +	if (IS_ERR(dp->aux)) {
> +		rc = PTR_ERR(dp->aux);
> +		DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
> +		dp->aux = NULL;
> +		goto error_aux;
> +	}
> +
> +	dp->link = dp_link_get(dev, dp->aux);
> +	if (IS_ERR(dp->link)) {
> +		rc = PTR_ERR(dp->link);
> +		DRM_ERROR("failed to initialize link, rc = %d\n", rc);
> +		dp->link = NULL;
> +		goto error_link;
> +	}
> +
> +	panel_in.aux = dp->aux;
> +	panel_in.catalog = dp->catalog;
> +	panel_in.link = dp->link;
> +
> +	dp->panel = dp_panel_get(&panel_in);
> +	if (IS_ERR(dp->panel)) {
> +		rc = PTR_ERR(dp->panel);
> +		DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> +		dp->panel = NULL;
> +		goto error_panel;
> +	}
> +
> +	dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
> +			       dp->power, dp->catalog, dp->parser);
> +	if (IS_ERR(dp->ctrl)) {
> +		rc = PTR_ERR(dp->ctrl);
> +		DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
> +		dp->ctrl = NULL;
> +		goto error_ctrl;
> +	}
> +
> +	return rc;
> +error_ctrl:
> +	dp_panel_put(dp->panel);
> +error_panel:
> +	dp_link_put(dp->link);
> +error_link:
> +	dp_aux_put(dp->aux);
> +error_aux:
> +	dp_power_put(dp->power);
> +error_power:
> +	dp_catalog_put(dp->catalog);
> +error_catalog:
> +	dp_parser_put(dp->parser);
> +error_parser:
> +	return rc;
> +}
> +
> +static int dp_display_set_mode(struct msm_dp *dp_display,
> +			       struct dp_display_mode *mode)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	dp->panel->dp_mode.drm_mode = mode->drm_mode;
> +	dp->panel->dp_mode.bpp = mode->bpp;
> +	dp->panel->dp_mode.capabilities = mode->capabilities;
> +	dp_panel_init_panel_info(dp->panel);
> +	return rc;
> +}
> +
> +static int dp_display_prepare(struct msm_dp *dp)
> +{
> +	return 0;
> +}
> +
> +static int dp_display_enable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (dp->power_on) {
> +		DRM_DEBUG_DP("Link already setup, return\n");
> +		return 0;
> +	}
> +
> +	dp_aux_init(dp->aux, dp->parser->aux_cfg);
> +
> +	rc = dp_ctrl_on(dp->ctrl);
> +	if (!rc)
> +		dp->power_on = true;
> +
> +	return rc;
> +}
> +
> +static int dp_display_post_enable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	complete_all(&dp->notification_comp);
> +	return rc;
> +}
> +
> +static int dp_display_pre_disable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (dp->usbpd->alt_mode_cfg_done)
> +		dp_link_psm_config(dp->link, &dp->panel->link_info, true);
> +
> +	dp_ctrl_push_idle(dp->ctrl);
> +	return rc;
> +}
> +
> +static int dp_display_disable(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	if (!dp->power_on || !dp->core_initialized)
> +		goto error;
> +
> +	dp_ctrl_off(dp->ctrl);
> +
> +	dp->power_on = false;
> +
> +	complete_all(&dp->notification_comp);
> +error:
> +	return rc;
> +}
> +
> +int dp_display_request_irq(struct msm_dp *dp_display)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!dp_display) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> +	dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> +	if (dp->irq < 0) {
> +		rc = dp->irq;
> +		DRM_ERROR("failed to get irq: %d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
> +		IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> +	if (rc < 0) {
> +		DRM_ERROR("failed to request IRQ%u: %d\n",
> +				dp->irq, rc);
> +		return rc;
> +	}
> +	disable_irq(dp->irq);
> +
> +	return 0;
> +}
> +
> +static int dp_display_unprepare(struct msm_dp *dp)
> +{
> +	return 0;
> +}
> +
> +int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
> +{
> +	const u32 num_components = 3, default_bpp = 24;
> +	struct dp_display_private *dp_display;
> +	struct drm_dp_link *link_info;
> +	u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
> +
> +	if (!dp || !mode_pclk_khz || !dp->connector) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +	link_info = &dp_display->panel->link_info;
> +
> +	mode_bpp = dp->connector->display_info.bpc * num_components;
> +	if (!mode_bpp)
> +		mode_bpp = default_bpp;
> +
> +	mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
> +			mode_bpp, mode_pclk_khz);
> +
> +	mode_rate_khz = mode_pclk_khz * mode_bpp;
> +	supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
> +
> +	if (mode_rate_khz > supported_rate_khz)
> +		return MODE_BAD;
> +
> +	return MODE_OK;
> +}
> +
> +int dp_display_get_modes(struct msm_dp *dp,
> +				struct dp_display_mode *dp_mode)
> +{
> +	struct dp_display_private *dp_display;
> +	int ret = 0;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return 0;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	ret = dp_panel_get_modes(dp_display->panel,
> +		dp->connector, dp_mode);
> +	if (dp_mode->drm_mode.clock)
> +		dp->max_pclk_khz = dp_mode->drm_mode.clock;
> +	return ret;
> +}
> +
> +bool dp_display_check_video_test(struct msm_dp *dp)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return false;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	if (dp_display->panel->video_test)
> +		return true;
> +
> +	return false;
> +}
> +
> +int dp_display_get_test_bpp(struct msm_dp *dp)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	if (!dp) {
> +		DRM_ERROR("invalid params\n");
> +		return 0;
> +	}
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	return dp_link_bit_depth_to_bpp(
> +		dp_display->link->test_video.test_bit_depth);
> +}
> +
> +static int dp_display_probe(struct platform_device *pdev)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp;
> +
> +	if (!pdev || !pdev->dev.of_node) {
> +		DRM_ERROR("pdev not found\n");
> +		return -ENODEV;
> +	}
> +
> +	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
> +	if (!dp)
> +		return -ENOMEM;
> +
> +	init_completion(&dp->notification_comp);
> +
> +	dp->pdev = pdev;
> +	dp->name = "drm_dp";
> +
> +	rc = dp_init_sub_modules(dp);
> +	if (rc) {
> +		DRM_ERROR("init sub module failed\n");
> +		devm_kfree(&pdev->dev, dp);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	platform_set_drvdata(pdev, dp);
> +
> +	mutex_init(&dp->dp_display.connect_mutex);
> +	g_dp_display = &dp->dp_display;
> +
> +	rc = component_add(&pdev->dev, &dp_display_comp_ops);
> +	if (rc) {
> +		DRM_ERROR("component add failed, rc=%d\n", rc);
> +		dp_display_deinit_sub_modules(dp);
> +		devm_kfree(&pdev->dev, dp);
> +	}
> +
> +	return rc;
> +}
> +
> +static int dp_display_remove(struct platform_device *pdev)
> +{
> +	struct dp_display_private *dp;
> +
> +	if (!pdev)
> +		return -EINVAL;
> +
> +	dp = platform_get_drvdata(pdev);
> +
> +	dp_display_deinit_sub_modules(dp);
> +
> +	platform_set_drvdata(pdev, NULL);
> +	devm_kfree(&pdev->dev, dp);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver dp_display_driver = {
> +	.probe  = dp_display_probe,
> +	.remove = dp_display_remove,
> +	.driver = {
> +		.name = "msm-dp-display",
> +		.of_match_table = dp_dt_match,
> +	},
> +};
> +
> +int __init msm_dp_register(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&dp_display_driver);
> +	if (ret) {
> +		DRM_ERROR("driver register failed");
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +void __exit msm_dp_unregister(void)
> +{
> +	platform_driver_unregister(&dp_display_driver);
> +}
> +
> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> +			struct drm_encoder *encoder)
> +{
> +	struct msm_drm_private *priv;
> +	int ret;
> +
> +	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
> +		return -EINVAL;
> +
> +	priv = dev->dev_private;
> +	dp_display->drm_dev = dev;
> +
> +	ret = dp_display_request_irq(dp_display);
> +	if (ret) {
> +		DRM_ERROR("request_irq failed, ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	dp_display->encoder = encoder;
> +
> +	dp_display->connector = dp_drm_connector_init(dp_display);
> +	if (IS_ERR(dp_display->connector)) {
> +		ret = PTR_ERR(dp_display->connector);
> +		DRM_DEV_ERROR(dev->dev,
> +			"failed to create dp connector: %d\n", ret);
> +		dp_display->connector = NULL;
> +		return ret;
> +	}
> +
> +	priv->connectors[priv->num_connectors++] = dp_display->connector;
> +	return 0;
> +}
> +
> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	int rc = 0;
> +	struct dp_display_private *dp_display;
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +	if (!dp_display->dp_mode.drm_mode.clock) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
> +	if (rc) {
> +		DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_prepare(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_enable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display enable failed, rc=%d\n", rc);
> +		dp_display_unprepare(dp);
> +		return rc;
> +	}
> +
> +	rc = dp_display_post_enable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
> +		dp_display_disable(dp);
> +		dp_display_unprepare(dp);
> +	}
> +	return rc;
> +}
> +
> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	int rc = 0;
> +
> +	rc = dp_display_pre_disable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_disable(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display disable failed, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = dp_display_unprepare(dp);
> +	if (rc) {
> +		DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
> +	}
> +	return rc;
> +}
> +
> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode)
> +{
> +	struct dp_display_private *dp_display;
> +
> +	dp_display = container_of(dp, struct dp_display_private, dp_display);
> +
> +	memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
> +
> +	if (dp_display_check_video_test(dp))
> +		dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
> +	else /* Default num_components per pixel = 3 */
> +		dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
> +
> +	if (!dp_display->dp_mode.bpp)
> +		dp_display->dp_mode.bpp = 24; /* Default bpp */
> +
> +	drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
> +
> +	dp_display->dp_mode.v_active_low =
> +		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
> +
> +	dp_display->dp_mode.h_active_low =
> +		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> new file mode 100644
> index 0000000..c916408
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_DISPLAY_H_
> +#define _DP_DISPLAY_H_
> +
> +#include <drm/drmP.h>
> +
> +#include "dp_panel.h"
> +
> +struct msm_dp {
> +	struct drm_device *drm_dev;
> +	struct drm_connector *connector;
> +	struct drm_encoder *encoder;
> +	bool is_connected;
> +	struct mutex connect_mutex;
> +	u32 max_pclk_khz;
> +};
> +
> +int dp_display_validate_mode(struct msm_dp *dp_display, u32 mode_pclk_khz);
> +int dp_display_get_modes(struct msm_dp *dp_display,
> +		struct dp_display_mode *dp_mode);
> +int dp_display_request_irq(struct msm_dp *dp_display);
> +bool dp_display_check_video_test(struct msm_dp *dp_display);
> +int dp_display_get_test_bpp(struct msm_dp *dp_display);
> +
> +#endif /* _DP_DISPLAY_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> new file mode 100644
> index 0000000..a72b0bb
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp]: %s: " fmt, __func__
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_crtc.h>
> +
> +#include "msm_drv.h"
> +#include "msm_kms.h"
> +#include "dp_drm.h"
> +
> +struct dp_connector {
> +	struct drm_connector base;
> +	struct msm_dp *dp_display;
> +};
> +#define to_dp_connector(x) container_of(x, struct dp_connector, base)
> +
> +/**
> + * dp_connector_detect - callback to determine if connector is connected
> + * @connector: Pointer to drm connector structure
> + * @force: Force detect setting from drm framework
> + * Returns: Connector 'is connected' status
> + */
> +static enum drm_connector_status dp_connector_detect(struct drm_connector *conn,
> +		bool force)
> +{
> +	struct msm_dp *dp;
> +
> +	dp = to_dp_connector(conn)->dp_display;
> +
> +	DRM_DEBUG_DP("is_connected = %s\n",
> +		(dp->is_connected) ? "true" : "false");
> +
> +	return (dp->is_connected) ? connector_status_connected :
> +					connector_status_disconnected;
> +}
> +
> +/**
> + * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add()
> + * @connector: Pointer to drm connector structure
> + * Returns: Number of modes added
> + */
> +static int dp_connector_get_modes(struct drm_connector *connector)
> +{
> +	int rc = 0;
> +	struct msm_dp *dp;
> +	struct dp_display_mode *dp_mode = NULL;
> +	struct drm_display_mode *m, drm_mode;
> +
> +	if (!connector)
> +		return 0;
> +
> +	dp = to_dp_connector(connector)->dp_display;
> +
> +	dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
> +	if (!dp_mode)
> +		return 0;
> +
> +	mutex_lock(&dp->connect_mutex);
> +	/* pluggable case assumes EDID is read when HPD */
> +	if (dp->is_connected) {
> +		/*
> +		 *The get_modes() function might return one mode that is stored
> +		 * in dp_mode when compliance test is in progress. If not, the
> +		 * return value is equal to the total number of modes supported
> +		 * by the sink
> +		 */
> +		rc = dp_display_get_modes(dp, dp_mode);
> +		if (rc <= 0) {
> +			DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
> +			mutex_unlock(&dp->connect_mutex);
> +			return rc;
> +		}
> +		if (dp_mode->drm_mode.clock) { /* valid DP mode */
> +			memset(&drm_mode, 0x0, sizeof(drm_mode));
> +			drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
> +			m = drm_mode_duplicate(connector->dev, &drm_mode);
> +			if (!m) {
> +				DRM_ERROR("failed to add mode %ux%u\n",
> +				       drm_mode.hdisplay,
> +				       drm_mode.vdisplay);
> +				kfree(dp_mode);
> +				mutex_unlock(&dp->connect_mutex);
> +				return 0;
> +			}
> +			drm_mode_probed_add(connector, m);
> +		}
> +	} else {
> +		DRM_DEBUG_DP("No sink connected\n");
> +	}
> +	mutex_unlock(&dp->connect_mutex);
> +	kfree(dp_mode);
> +	return rc;
> +}
> +
> +/**
> + * dp_connector_mode_valid - callback to determine if specified mode is valid
> + * @connector: Pointer to drm connector structure
> + * @mode: Pointer to drm mode structure
> + * Returns: Validity status for specified mode
> + */
> +static enum drm_mode_status dp_connector_mode_valid(struct drm_connector *connector,
> +		struct drm_display_mode *mode)
> +{
> +	struct msm_dp *dp_disp;
> +
> +	if (!mode || !connector) {
> +		DRM_ERROR("invalid params\n");
> +		return MODE_ERROR;
> +	}
> +
> +	dp_disp = to_dp_connector(connector)->dp_display;
> +
> +	mode->vrefresh = drm_mode_vrefresh(mode);
> +
> +	if ((dp_disp->max_pclk_khz <= 0) ||
> +			(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
> +			(mode->clock > dp_disp->max_pclk_khz))
> +		return MODE_BAD;
> +
> +	return dp_display_validate_mode(dp_disp, mode->clock);
> +}
> +
> +static const struct drm_connector_funcs dp_connector_funcs = {
> +	.detect = dp_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_connector_helper_funcs dp_connector_helper_funcs = {
> +	.get_modes = dp_connector_get_modes,
> +	.mode_valid = dp_connector_mode_valid,
> +};
> +
> +/* connector initialization */
> +struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
> +{
> +	struct drm_connector *connector = NULL;
> +	struct dp_connector *dp_connector;
> +	int ret;
> +
> +	dp_connector = devm_kzalloc(dp_display->drm_dev->dev, sizeof(*dp_connector),
> +				    GFP_KERNEL);
> +	if (!dp_connector)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dp_connector->dp_display = dp_display;
> +
> +	connector = &dp_connector->base;
> +
> +	ret = drm_connector_init(dp_display->drm_dev, connector, &dp_connector_funcs,
> +			DRM_MODE_CONNECTOR_DisplayPort);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	drm_connector_helper_add(connector, &dp_connector_helper_funcs);
> +
> +	/*
> +	 * Enable HPD to let hpd event is handled when cable is attached to the host.
> +	 */
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_attach_encoder(connector, dp_display->encoder);
> +
> +	return connector;
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> new file mode 100644
> index 0000000..cf472c5
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_DRM_H_
> +#define _DP_DRM_H_
> +
> +#include <linux/types.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +
> +#include "msm_drv.h"
> +#include "dp_display.h"
> +
> +struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display);
> +
> +#endif /* _DP_DRM_H_ */
> +
> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c b/drivers/gpu/drm/msm/dp/dp_extcon.c
> new file mode 100644
> index 0000000..0fb34ef
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
> @@ -0,0 +1,216 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/extcon.h>
> +#include <drm/drmP.h>
> +
> +#include "dp_extcon.h"
> +
> +/* DP specific VDM commands */
> +#define DP_USBPD_VDM_STATUS	0x10
> +#define DP_USBPD_VDM_CONFIGURE	0x11
> +
> +/* USBPD-TypeC specific Macros */
> +#define VDM_VERSION		0x0
> +#define USB_C_DP_SID		0xFF01
> +
> +struct dp_extcon_private {
> +	u32 vdo;
> +	struct device *dev;
> +	struct notifier_block extcon_nb;
> +	struct extcon_dev *extcon;
> +	struct workqueue_struct *extcon_wq;
> +	struct work_struct event_work;
> +	struct usbpd *pd;
> +	struct dp_usbpd_cb *dp_cb;
> +	struct dp_usbpd dp_usbpd;
> +};
> +
> +static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
> +{
> +	int rc = 0;
> +	struct dp_extcon_private *extcon_priv;
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	dp_usbpd->hpd_high = hpd;
> +
> +	if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
> +				&& !extcon_priv->dp_cb->disconnect) {
> +		DRM_ERROR("extcon dp_cb not initialized\n");
> +		return -EINVAL;
> +	}
> +	if (hpd)
> +		extcon_priv->dp_cb->configure(extcon_priv->dev);
> +	else
> +		extcon_priv->dp_cb->disconnect(extcon_priv->dev);
> +
> +	return rc;
> +}
> +
> +static void dp_extcon_event_work(struct work_struct *work)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +	int dp_state, ret;
> +	union extcon_property_value property;
> +
> +	extcon_priv = container_of(work,
> +			struct dp_extcon_private, event_work);
> +
> +	if (!extcon_priv || !extcon_priv->extcon) {
> +		DRM_ERROR("Invalid extcon device handler\n");
> +		return;
> +	}
> +
> +	dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
> +
> +	if (dp_state > 0) {
> +		ret = extcon_get_property(extcon_priv->extcon,
> +					EXTCON_DISP_DP,
> +					EXTCON_PROP_USB_TYPEC_POLARITY,
> +					&property);
> +		if (ret) {
> +			DRM_ERROR("Get Polarity property failed\n");
> +			return;
> +		}
> +		extcon_priv->dp_usbpd.orientation =
> +			(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
> +
> +		extcon_get_property(extcon_priv->extcon,
> +					EXTCON_DISP_DP,
> +					EXTCON_PROP_USB_SS,
> +					&property);
> +		extcon_priv->dp_usbpd.multi_func =
> +				((property.intval) ? true : false);
> +
> +		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
> +		if (ret) {
> +			DRM_ERROR("extcon_connect->true failed\n");
> +			return;
> +		}
> +	} else {
> +		ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
> +		if (ret) {
> +			DRM_ERROR("extcon_connect->false failed\n");
> +			return;
> +		}
> +	}
> +}
> +
> +static int dp_extcon_event_notify(struct notifier_block *nb,
> +				  unsigned long event, void *priv)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +
> +	extcon_priv = container_of(nb, struct dp_extcon_private,
> +						extcon_nb);
> +
> +	queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
> +	return NOTIFY_DONE;
> +}
> +
> +int dp_extcon_register(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +	int ret = 0;
> +
> +	if (!dp_usbpd)
> +		return -EINVAL;
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
> +	ret = devm_extcon_register_notifier(extcon_priv->dev, extcon_priv->extcon,
> +					    EXTCON_DISP_DP,
> +					    &extcon_priv->extcon_nb);
> +	if (ret) {
> +		DRM_DEV_ERROR(extcon_priv->dev,
> +			"register EXTCON_DISP_DP notifier err\n");
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	extcon_priv->extcon_wq = create_singlethread_workqueue("drm_dp_extcon");
> +	if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
> +		DRM_ERROR("Failed to create workqueue\n");
> +		dp_extcon_unregister(dp_usbpd);
> +		return -EPERM;
> +	}
> +
> +	INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
> +	return ret;
> +}
> +
> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon_priv;
> +
> +	if (!dp_usbpd) {
> +		DRM_ERROR("Invalid input\n");
> +		return;
> +	}
> +
> +	extcon_priv = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	devm_extcon_unregister_notifier(extcon_priv->dev, extcon_priv->extcon,
> +					    EXTCON_DISP_DP,
> +					    &extcon_priv->extcon_nb);
> +
> +	if (extcon_priv->extcon_wq)
> +		destroy_workqueue(extcon_priv->extcon_wq);
> +
> +	return;
> +}
> +
> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb)
> +{
> +	int rc = 0;
> +	struct dp_extcon_private *dp_extcon;
> +	struct dp_usbpd *dp_usbpd;
> +
> +	if (!cb) {
> +		DRM_ERROR("invalid cb data\n");
> +		rc = -EINVAL;
> +		return ERR_PTR(rc);
> +	}
> +
> +	dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
> +	if (!dp_extcon) {
> +		rc = -ENOMEM;
> +		return ERR_PTR(rc);
> +	}
> +
> +	dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
> +	if (!dp_extcon->extcon) {
> +		DRM_ERROR("invalid extcon data\n");
> +		rc = -EINVAL;
> +		devm_kfree(dev, dp_extcon);
> +		return ERR_PTR(rc);
> +        }
> +
> +	dp_extcon->dev = dev;
> +	dp_extcon->dp_cb = cb;
> +
> +	dp_extcon->dp_usbpd.connect = dp_extcon_connect;
> +	dp_usbpd = &dp_extcon->dp_usbpd;
> +
> +	return dp_usbpd;
> +}
> +
> +void dp_extcon_put(struct dp_usbpd *dp_usbpd)
> +{
> +	struct dp_extcon_private *extcon;
> +
> +	if (!dp_usbpd)
> +		return;
> +
> +	extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> +
> +	devm_kfree(extcon->dev, extcon);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h b/drivers/gpu/drm/msm/dp/dp_extcon.h
> new file mode 100644
> index 0000000..c6c3051
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
> @@ -0,0 +1,84 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_EXTCON_H_
> +#define _DP_EXTCON_H_
> +
> +//#include <linux/usb/usbpd.h>
> +
> +#include <linux/types.h>
> +#include <linux/device.h>
> +
> +enum plug_orientation {
> +	ORIENTATION_NONE,
> +	ORIENTATION_CC1,
> +	ORIENTATION_CC2,
> +};
> +
> +/**
> + * struct dp_usbpd - DisplayPort status
> + *
> + * @orientation: plug orientation configuration
> + * @low_pow_st: low power state
> + * @adaptor_dp_en: adaptor functionality enabled
> + * @multi_func: multi-function preferred
> + * @usb_config_req: request to switch to usb
> + * @exit_dp_mode: request exit from displayport mode
> + * @hpd_high: Hot Plug Detect signal is high.
> + * @hpd_irq: Change in the status since last message
> + * @alt_mode_cfg_done: bool to specify alt mode status
> + * @debug_en: bool to specify debug mode
> + * @connect: simulate disconnect or connect for debug mode
> + */
> +struct dp_usbpd {
> +	enum plug_orientation orientation;
> +	bool low_pow_st;
> +	bool adaptor_dp_en;
> +	bool multi_func;
> +	bool usb_config_req;
> +	bool exit_dp_mode;
> +	bool hpd_high;
> +	bool hpd_irq;
> +	bool alt_mode_cfg_done;
> +	bool debug_en;
> +
> +	int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
> +};
> +
> +/**
> + * struct dp_usbpd_cb - callback functions provided by the client
> + *
> + * @configure: called by usbpd module when PD communication has
> + * been completed and the usb peripheral has been configured on
> + * dp mode.
> + * @disconnect: notify the cable disconnect issued by usb.
> + * @attention: notify any attention message issued by usb.
> + */
> +struct dp_usbpd_cb {
> +	int (*configure)(struct device *dev);
> +	int (*disconnect)(struct device *dev);
> +	int (*attention)(struct device *dev);
> +};
> +
> +/**
> + * dp_extcon_get() - setup usbpd module
> + *
> + * @dev: device instance of the caller
> + * @cb: struct containing callback function pointers.
> + *
> + * This function allows the client to initialize the usbpd
> + * module. The module will communicate with usb driver and
> + * handles the power delivery (PD) communication with the
> + * sink/usb device. This module will notify the client using
> + * the callback functions about the connection and status.
> + */
> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb *cb);
> +
> +void dp_extcon_put(struct dp_usbpd *pd);
> +
> +int dp_extcon_register(struct dp_usbpd *dp_usbpd);
> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
> +
> +#endif /* _DP_EXTCON_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> new file mode 100644
> index 0000000..9f5b7bc8
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -0,0 +1,1185 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include "dp_link.h"
> +#include "dp_panel.h"
> +
> +#define DP_TEST_REQUEST_MASK		0x7F
> +
> +enum audio_sample_rate {
> +	AUDIO_SAMPLE_RATE_32_KHZ	= 0x00,
> +	AUDIO_SAMPLE_RATE_44_1_KHZ	= 0x01,
> +	AUDIO_SAMPLE_RATE_48_KHZ	= 0x02,
> +	AUDIO_SAMPLE_RATE_88_2_KHZ	= 0x03,
> +	AUDIO_SAMPLE_RATE_96_KHZ	= 0x04,
> +	AUDIO_SAMPLE_RATE_176_4_KHZ	= 0x05,
> +	AUDIO_SAMPLE_RATE_192_KHZ	= 0x06,
> +};
> +
> +enum audio_pattern_type {
> +	AUDIO_TEST_PATTERN_OPERATOR_DEFINED	= 0x00,
> +	AUDIO_TEST_PATTERN_SAWTOOTH		= 0x01,
> +};
> +
> +struct dp_link_request {
> +	u32 test_requested;
> +	u32 test_link_rate;
> +	u32 test_lane_count;
> +};
> +
> +struct dp_link_private {
> +	u32 prev_sink_count;
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_link dp_link;
> +
> +	struct dp_link_request request;
> +	struct mutex test_response_mutex;
> +	struct mutex psm_mutex;
> +	u8 link_status[DP_LINK_STATUS_SIZE];
> +};
> +
> +static int dp_link_get_period(struct dp_link_private *link, int const addr)
> +{
> +	int ret = 0;
> +	u8 data;
> +	u32 const max_audio_period = 0xA;
> +
> +	/* TEST_AUDIO_PERIOD_CH_XX */
> +	if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
> +		DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	/* Period - Bits 3:0 */
> +	data = data & 0xF;
> +	if ((int)data > max_audio_period) {
> +		DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	ret = data;
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_channel_period(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	struct dp_link_test_audio *req = &link->dp_link.test_audio;
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_1 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_2 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
> +
> +	/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_3 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_4 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_5 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_6 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_7 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
> +
> +	ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
> +	if (ret == -EINVAL)
> +		goto exit;
> +
> +	req->test_audio_period_ch_8 = ret;
> +	DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_pattern_type(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +	int const max_audio_pattern_type = 0x1;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> +				DP_TEST_AUDIO_PATTERN_TYPE, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Audio Pattern Type - Bits 7:0 */
> +	if ((int)data > max_audio_pattern_type) {
> +		DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	link->dp_link.test_audio.test_audio_pattern_type = data;
> +	DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
> +exit:
> +	return ret;
> +}
> +
> +static int dp_link_parse_audio_mode(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +	int const max_audio_sampling_rate = 0x6;
> +	int const max_audio_channel_count = 0x8;
> +	int sampling_rate = 0x0;
> +	int channel_count = 0x0;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Sampling Rate - Bits 3:0 */
> +	sampling_rate = data & 0xF;
> +	if (sampling_rate > max_audio_sampling_rate) {
> +		DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
> +				sampling_rate, max_audio_sampling_rate);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	/* Channel Count - Bits 7:4 */
> +	channel_count = ((data & 0xF0) >> 4) + 1;
> +	if (channel_count > max_audio_channel_count) {
> +		DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
> +				channel_count, max_audio_channel_count);
> +		ret = -EINVAL;
> +		goto exit;
> +	}
> +
> +	link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
> +	link->dp_link.test_audio.test_audio_channel_count = channel_count;
> +	DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
> +					sampling_rate, channel_count);
> +exit:
> +	return ret;
> +}
> +
> +/**
> + * dp_parse_audio_pattern_params() - parses audio pattern parameters from DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the audio link pattern parameters.
> + */
> +static int dp_link_parse_audio_pattern_params(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	ret = dp_link_parse_audio_mode(link);
> +	if (ret)
> +		goto exit;
> +
> +	ret = dp_link_parse_audio_pattern_type(link);
> +	if (ret)
> +		goto exit;
> +
> +	ret = dp_link_parse_audio_channel_period(link);
> +
> +exit:
> +	return ret;
> +}
> +
> +/**
> + * dp_link_is_video_pattern_valid() - validates the video pattern
> + * @pattern: video pattern requested by the sink
> + *
> + * Returns true if the requested video pattern is supported.
> + */
> +static bool dp_link_is_video_pattern_valid(u32 pattern)
> +{
> +	switch (pattern) {
> +	case DP_NO_TEST_PATTERN:
> +	case DP_COLOR_RAMP:
> +	case DP_BLACK_AND_WHITE_VERTICAL_LINES:
> +	case DP_COLOR_SQUARE:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +/**
> + * dp_link_is_bit_depth_valid() - validates the bit depth requested
> + * @bit_depth: bit depth requested by the sink
> + *
> + * Returns true if the requested bit depth is supported.
> + */
> +static bool dp_link_is_bit_depth_valid(u32 tbd)
> +{
> +	/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
> +	switch (tbd) {
> +	case DP_TEST_BIT_DEPTH_6:
> +	case DP_TEST_BIT_DEPTH_8:
> +	case DP_TEST_BIT_DEPTH_10:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static int dp_link_parse_timing_params1(struct dp_link_private *link,
> +					int addr, int len, u32 *val)
> +{
> +	u8 bp[2];
> +	int rlen;
> +
> +	if (len != 2)
> +		return -EINVAL;
> +
> +	/* Read the requested video link pattern (Byte 0x221). */
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> +	if (rlen < len) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +
> +	*val = bp[1] | (bp[0] << 8);
> +
> +	return 0;
> +}
> +
> +static int dp_link_parse_timing_params2(struct dp_link_private *link,
> +					int addr, int len,
> +					u32 *val1, u32 *val2)
> +{
> +	u8 bp[2];
> +	int rlen;
> +
> +	if (len != 2)
> +		return -EINVAL;
> +
> +	/* Read the requested video link pattern (Byte 0x221). */
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> +	if (rlen < len) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +
> +	*val1 = (bp[0] & BIT(7)) >> 7;
> +	*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
> +
> +	return 0;
> +}
> +
> +static int dp_link_parse_timing_params3(struct dp_link_private *link,
> +					int addr, u32 *val)
> +{
> +	u8 bp;
> +	u32 len = 1;
> +	int rlen;
> +
> +	rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
> +	if (rlen < 1) {
> +		DRM_ERROR("failed to read 0x%x\n", addr);
> +		return -EINVAL;
> +	}
> +	*val = bp;
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_parse_video_pattern_params() - parses video pattern parameters from DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the video link pattern and the link
> + * bit depth requested by the sink and, and if the values parsed are valid.
> + */
> +static int dp_link_parse_video_pattern_params(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	ssize_t rlen;
> +	u8 bp;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!dp_link_is_video_pattern_valid(bp)) {
> +		DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	link->dp_link.test_video.test_video_pattern = bp;
> +
> +	/* Read the requested color bit depth and dynamic range (Byte 0x232) */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	/* Dynamic Range */
> +	link->dp_link.test_video.test_dyn_range = (bp & DP_TEST_DYNAMIC_RANGE_CEA);
> +
> +	/* Color bit depth */
> +	bp &= DP_TEST_BIT_DEPTH_MASK;
> +	if (!dp_link_is_bit_depth_valid(bp)) {
> +		DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	link->dp_link.test_video.test_bit_depth = bp;
> +
> +	/* resolution timing params */
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
> +			&link->dp_link.test_video.test_h_total);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
> +			&link->dp_link.test_video.test_v_total);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
> +			&link->dp_link.test_video.test_h_start);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
> +			&link->dp_link.test_video.test_v_start);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
> +			&link->dp_link.test_video.test_hsync_pol,
> +			&link->dp_link.test_video.test_hsync_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
> +			&link->dp_link.test_video.test_vsync_pol,
> +			&link->dp_link.test_video.test_vsync_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
> +			&link->dp_link.test_video.test_h_width);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
> +			&link->dp_link.test_video.test_v_height);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
> +		&link->dp_link.test_video.test_rr_d);
> +	link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
> +		return ret;
> +	}
> +
> +	ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR,
> +		&link->dp_link.test_video.test_rr_n);
> +	if (ret) {
> +		DRM_ERROR("failed to parse test_rr_n (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
> +		return ret;
> +	}
> +
> +	DRM_DEBUG_DP("link video pattern = 0x%x\n" \
> +		"link dynamic range = 0x%x\n" \
> +		"link bit depth = 0x%x\n" \
> +		"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
> +		"TEST_H_START = %d, TEST_V_START = %d\n" \
> +		"TEST_HSYNC_POL = %d\n" \
> +		"TEST_HSYNC_WIDTH = %d\n" \
> +		"TEST_VSYNC_POL = %d\n" \
> +		"TEST_VSYNC_WIDTH = %d\n" \
> +		"TEST_H_WIDTH = %d\n" \
> +		"TEST_V_HEIGHT = %d\n" \
> +		"TEST_REFRESH_DENOMINATOR = %d\n" \
> +		 "TEST_REFRESH_NUMERATOR = %d\n",
> +		link->dp_link.test_video.test_video_pattern,
> +		link->dp_link.test_video.test_dyn_range,
> +		link->dp_link.test_video.test_bit_depth,
> +		link->dp_link.test_video.test_h_total,
> +		link->dp_link.test_video.test_v_total,
> +		link->dp_link.test_video.test_h_start,
> +		link->dp_link.test_video.test_v_start,
> +		link->dp_link.test_video.test_hsync_pol,
> +		link->dp_link.test_video.test_hsync_width,
> +		link->dp_link.test_video.test_vsync_pol,
> +		link->dp_link.test_video.test_vsync_width,
> +		link->dp_link.test_video.test_h_width,
> +		link->dp_link.test_video.test_v_height,
> +		link->dp_link.test_video.test_rr_d,
> +		link->dp_link.test_video.test_rr_n);
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_parse_link_training_params() - parses link training parameters from
> + * DPCD
> + * @link: Display Port Driver data
> + *
> + * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane
> + * count (Byte 0x220), and if these values parse are valid.
> + */
> +static int dp_link_parse_link_training_params(struct dp_link_private *link)
> +{
> +	u8 bp;
> +	ssize_t rlen;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,	&bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!is_link_rate_valid(bp)) {
> +		DRM_ERROR("invalid link rate = 0x%x\n", bp);
> +		return -EINVAL;
> +	}
> +
> +	link->request.test_link_rate = bp;
> +	DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT, &bp);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +	bp &= DP_MAX_LANE_COUNT_MASK;
> +
> +	if (!is_lane_count_valid(bp)) {
> +		DRM_ERROR("invalid lane count = 0x%x\n", bp);
> +		return -EINVAL;
> +	}
> +
> +	link->request.test_lane_count = bp;
> +	DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
> +	return 0;
> +}
> +
> +/**
> + * dp_parse_phy_test_params() - parses the phy link parameters
> + * @link: Display Port Driver data
> + *
> + * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being
> + * requested.
> + */
> +static int dp_link_parse_phy_test_params(struct dp_link_private *link)
> +{
> +	u8 data;
> +	ssize_t rlen;
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	link->dp_link.phy_params.phy_test_pattern_sel = data;
> +
> +	DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
> +
> +	switch (data) {
> +	case DP_LINK_QUAL_PATTERN_DISABLE:
> +	case DP_LINK_QUAL_PATTERN_D10_2:
> +	case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> +	case DP_LINK_QUAL_PATTERN_PRBS7:
> +	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> +	case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +/**
> + * dp_link_is_video_audio_test_requested() - checks for audio/video link request
> + * @link: link requested by the sink
> + *
> + * Returns true if the requested link is a permitted audio/video link.
> + */
> +static bool dp_link_is_video_audio_test_requested(u32 link)
> +{
> +	u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
> +				DP_TEST_LINK_AUDIO_PATTERN |
> +				DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> +
> +	return ((link & video_audio_test) &&
> +		!(link & ~video_audio_test));
> +}
> +
> +/**
> + * dp_link_parse_request() - parses link request parameters from sink
> + * @link: Display Port Driver data
> + *
> + * Parses the DPCD to check if an automated link is requested (Byte 0x201),
> + * and what type of link automation is being requested (Byte 0x218).
> + */
> +static int dp_link_parse_request(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +	u8 data;
> +	ssize_t rlen;
> +
> +	/**
> +	 * Read the device service IRQ vector (Byte 0x201) to determine
> +	 * whether an automated link has been requested by the sink.
> +	 */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> +				DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
> +
> +	if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
> +		DRM_DEBUG_DP("no test requested\n");
> +		return 0;
> +	}
> +
> +	/**
> +	 * Read the link request byte (Byte 0x218) to determine what type
> +	 * of automated link has been requested by the sink.
> +	 */
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
> +	if (rlen < 0) {
> +		DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
> +		DRM_DEBUG_DP("link 0x%x not supported\n", data);
> +		goto end;
> +	}
> +
> +	DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
> +	link->request.test_requested = data;
> +
> +	if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
> +		ret = dp_link_parse_phy_test_params(link);
> +		if (ret)
> +			goto end;
> +		ret = dp_link_parse_link_training_params(link);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
> +		ret = dp_link_parse_link_training_params(link);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	if (dp_link_is_video_audio_test_requested(
> +			link->request.test_requested)) {
> +		ret = dp_link_parse_video_pattern_params(link);
> +		if (ret)
> +			goto end;
> +
> +		ret = dp_link_parse_audio_pattern_params(link);
> +	}
> +end:
> +	/*
> +	 * Send a DP_TEST_ACK if all link parameters are valid, otherwise send
> +	 * a DP_TEST_NAK.
> +	 */
> +	if (ret) {
> +		link->dp_link.test_response = DP_TEST_NAK;
> +	} else {
> +		if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
> +			link->dp_link.test_response = DP_TEST_ACK;
> +		else
> +			link->dp_link.test_response =
> +				DP_TEST_EDID_CHECKSUM_WRITE;
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_parse_sink_count() - parses the sink count
> + *
> + * Parses the DPCD to check if there is an update to the sink count
> + * (Byte 0x200), and whether all the sink devices connected have Content
> + * Protection enabled.
> + */
> +static int dp_link_parse_sink_count(struct dp_link *dp_link)
> +{
> +	ssize_t rlen;
> +	bool cp_ready;
> +
> +	struct dp_link_private *link = container_of(dp_link,
> +			struct dp_link_private, dp_link);
> +
> +	rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
> +				 &link->dp_link.sink_count);
> +	if (rlen < 0) {
> +		DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
> +		return rlen;
> +	}
> +
> +	cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
> +
> +	link->dp_link.sink_count =
> +		DP_GET_SINK_COUNT(link->dp_link.sink_count);
> +
> +	DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
> +		link->dp_link.sink_count, cp_ready);
> +	return 0;
> +}
> +
> +static void dp_link_parse_sink_status_field(struct dp_link_private *link)
> +{
> +	int len = 0;
> +
> +	link->prev_sink_count = link->dp_link.sink_count;
> +	dp_link_parse_sink_count(&link->dp_link);
> +
> +	len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
> +		link->link_status);
> +	if (len < DP_LINK_STATUS_SIZE)
> +		DRM_ERROR("DP link status read failed\n");
> +	dp_link_parse_request(link);
> +}
> +
> +/**
> + * dp_link_process_link_training_request() - processes new training requests
> + * @link: Display Port link data
> + *
> + * This function will handle new link training requests that are initiated by
> + * the sink. In particular, it will update the requested lane count and link
> + * link rate, and then trigger the link retraining procedure.
> + *
> + * The function will return 0 if a link training request has been processed,
> + * otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_link_training_request(struct dp_link_private *link)
> +{
> +	if (link->request.test_requested != DP_TEST_LINK_TRAINING)
> +		return -EINVAL;
> +
> +	DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
> +			DP_TEST_LINK_TRAINING,
> +			link->request.test_link_rate,
> +			link->request.test_lane_count);
> +
> +	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> +	link->dp_link.link_params.rate = link->request.test_link_rate;
> +
> +	return 0;
> +}
> +
> +bool dp_link_send_test_response(struct dp_link *dp_link)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return false;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->test_response_mutex);
> +	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
> +			dp_link->test_response);
> +	mutex_unlock(&link->test_response_mutex);
> +
> +	return ret == 1;
> +}
> +
> +int dp_link_psm_config(struct dp_link *dp_link,
> +			      struct drm_dp_link *link_info, bool enable)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid params\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->psm_mutex);
> +	if (enable)
> +		ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
> +	else
> +		ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
> +
> +	if (ret)
> +		DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" : "exit");
> +	else
> +		dp_link->psm_enabled = enable;
> +
> +	mutex_unlock(&link->psm_mutex);
> +	return ret;
> +}
> +
> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
> +{
> +	struct dp_link_private *link = NULL;
> +	int ret = 0;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return false;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM, checksum);
> +	return ret == 1;
> +}
> +
> +static int dp_link_parse_vx_px(struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
> +		drm_dp_get_adjust_request_voltage(link->link_status, 0),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 1),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 2),
> +		drm_dp_get_adjust_request_voltage(link->link_status, 3));
> +
> +	DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
> +
> +	/**
> +	 * Update the voltage and pre-emphasis levels as per DPCD request
> +	 * vector.
> +	 */
> +	DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
> +			link->dp_link.phy_params.v_level,
> +			link->dp_link.phy_params.p_level);
> +	link->dp_link.phy_params.v_level =
> +		drm_dp_get_adjust_request_voltage(link->link_status, 0);
> +	link->dp_link.phy_params.p_level =
> +		drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
> +	DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
> +			link->dp_link.phy_params.v_level,
> +			link->dp_link.phy_params.p_level);
> +
> +	return ret;
> +}
> +
> +/**
> + * dp_link_process_phy_test_pattern_request() - process new phy link requests
> + * @link: Display Port Driver data
> + *
> + * This function will handle new phy link pattern requests that are initiated
> + * by the sink. The function will return 0 if a phy link pattern has been
> + * processed, otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_phy_test_pattern_request(
> +		struct dp_link_private *link)
> +{
> +	int ret = 0;
> +
> +	if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) {
> +		DRM_DEBUG_DP("no phy test\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!is_link_rate_valid(link->request.test_link_rate) ||
> +		!is_lane_count_valid(link->request.test_lane_count)) {
> +		DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
> +			link->request.test_link_rate, link->request.test_lane_count);
> +		return -EINVAL;
> +	}
> +
> +	DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
> +			link->dp_link.link_params.rate,
> +			link->dp_link.link_params.num_lanes);
> +
> +	DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
> +			link->request.test_link_rate, link->request.test_lane_count);
> +
> +	link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> +	link->dp_link.link_params.rate = link->request.test_link_rate;
> +
> +	ret = dp_link_parse_vx_px(link);
> +	if (ret)
> +		  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
> +
> +	return ret;
> +}
> +
> +static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
> +{
> +	return link_status[r - DP_LANE0_1_STATUS];
> +}
> +
> +/**
> + * dp_link_process_link_status_update() - processes link status updates
> + * @link: Display Port link module data
> + *
> + * This function will check for changes in the link status, e.g. clock
> + * recovery done on all lanes, and trigger link training if there is a
> + * failure/error on the link.
> + *
> + * The function will return 0 if the a link status update has been processed,
> + * otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_link_status_update(struct dp_link_private *link)
> +{
> +	if (!(get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
> +							DP_LINK_STATUS_UPDATED) ||
> +			(drm_dp_clock_recovery_ok(link->link_status,
> +					link->dp_link.link_params.num_lanes) &&
> +			drm_dp_channel_eq_ok(link->link_status,
> +					link->dp_link.link_params.num_lanes)))
> +		return -EINVAL;
> +
> +	DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
> +			drm_dp_clock_recovery_ok(link->link_status,
> +			link->dp_link.link_params.num_lanes),
> +			drm_dp_clock_recovery_ok(link->link_status,
> +			link->dp_link.link_params.num_lanes));
> +
> +	return 0;
> +}
> +
> +/**
> + * dp_link_process_downstream_port_status_change() - process port status changes
> + * @link: Display Port Driver data
> + *
> + * This function will handle downstream port updates that are initiated by
> + * the sink. If the downstream port status has changed, the EDID is read via
> + * AUX.
> + *
> + * The function will return 0 if a downstream port update has been
> + * processed, otherwise it will return -EINVAL.
> + */
> +static int dp_link_process_ds_port_status_change(struct dp_link_private *link)
> +{
> +	if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) &
> +					DP_DOWNSTREAM_PORT_STATUS_CHANGED)
> +		goto reset;
> +
> +	if (link->prev_sink_count == link->dp_link.sink_count)
> +		return -EINVAL;
> +
> +reset:
> +	/* reset prev_sink_count */
> +	link->prev_sink_count = link->dp_link.sink_count;
> +
> +	return 0;
> +}
> +
> +static bool dp_link_is_video_pattern_requested(struct dp_link_private *link)
> +{
> +	return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
> +		&& !(link->request.test_requested &
> +		DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> +}
> +
> +static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link)
> +{
> +	return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
> +}
> +
> +static void dp_link_reset_data(struct dp_link_private *link)
> +{
> +	link->request = (const struct dp_link_request){ 0 };
> +	link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
> +	link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
> +	link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
> +	link->dp_link.phy_params.phy_test_pattern_sel = 0;
> +	link->dp_link.sink_request = 0;
> +	link->dp_link.test_response = 0;
> +}
> +
> +/**
> + * dp_link_process_request() - handle HPD IRQ transition to HIGH
> + * @link: pointer to link module data
> + *
> + * This function will handle the HPD IRQ state transitions from LOW to HIGH
> + * (including cases when there are back to back HPD IRQ HIGH) indicating
> + * the start of a new link training request or sink status update.
> + */
> +int dp_link_process_request(struct dp_link *dp_link)
> +{
> +	int ret = 0;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	mutex_lock(&link->test_response_mutex);
> +	dp_link_reset_data(link);
> +
> +	dp_link_parse_sink_status_field(link);
> +	mutex_unlock(&link->test_response_mutex);
> +
> +	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
> +		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_ds_port_status_change(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_link_training_request(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_TEST_LINK_TRAINING;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_phy_test_pattern_request(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
> +		return ret;
> +	}
> +
> +	ret = dp_link_process_link_status_update(link);
> +	if (!ret) {
> +		dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
> +		return ret;
> +	}
> +
> +	if (dp_link_is_video_pattern_requested(link)) {
> +		dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
> +		return -EINVAL;
> +	}
> +
> +	if (dp_link_is_audio_pattern_requested(link)) {
> +		dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +int dp_link_get_colorimetry_config(struct dp_link *dp_link)
> +{
> +	u32 cc;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	/*
> +	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
> +	 * Only RGB_VESA and RGB_CEA supported for now
> +	 */
> +	if (dp_link_is_video_pattern_requested(link))
> +		cc = link->dp_link.test_video.test_dyn_range;
> +	else
> +		cc = DP_TEST_DYNAMIC_RANGE_VESA;
> +
> +	return cc;
> +}
> +
> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
> +{
> +	int i;
> +	int v_max = 0, p_max = 0;
> +	struct dp_link_private *link;
> +
> +	if (!dp_link) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	/* use the max level across lanes */
> +	for (i = 0; i < dp_link->link_params.num_lanes; i++) {
> +		u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
> +		u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
> +		DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
> +							i, data_v, data_p);
> +		if (v_max < data_v)
> +			v_max = data_v;
> +		if (p_max < data_p)
> +			p_max = data_p;
> +	}
> +
> +	dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
> +	dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
> +
> +	/**
> +	 * Adjust the voltage swing and pre-emphasis level combination to within
> +	 * the allowable range.
> +	 */
> +	if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> +		DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
> +			dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
> +		dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
> +	}
> +
> +	if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
> +		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> +			dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
> +		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
> +	}
> +
> +	if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
> +		&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
> +		DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> +			dp_link->phy_params.p_level,
> +			DP_TRAIN_PRE_EMPHASIS_LVL_1);
> +		dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
> +	}
> +
> +	DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
> +		dp_link->phy_params.v_level, dp_link->phy_params.p_level);
> +
> +	return 0;
> +}
> +
> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
> +{
> +	u32 tbd;
> +
> +	/*
> +	 * Few simplistic rules and assumptions made here:
> +	 *    1. Test bit depth is bit depth per color component
> +	 *    2. Assume 3 color components
> +	 */
> +	switch (bpp) {
> +	case 18:
> +		tbd = DP_TEST_BIT_DEPTH_6;
> +		break;
> +	case 24:
> +		tbd = DP_TEST_BIT_DEPTH_8;
> +		break;
> +	case 30:
> +		tbd = DP_TEST_BIT_DEPTH_10;
> +		break;
> +	default:
> +		tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
> +		break;
> +	}
> +
> +	if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
> +		tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
> +
> +	return tbd;
> +}
> +
> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
> +{
> +	int rc = 0;
> +	struct dp_link_private *link;
> +	struct dp_link *dp_link;
> +
> +	if (!dev || !aux) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
> +	if (!link) {
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	link->dev   = dev;
> +	link->aux   = aux;
> +
> +	mutex_init(&link->test_response_mutex);
> +	mutex_init(&link->psm_mutex);
> +	dp_link = &link->dp_link;
> +
> +	return dp_link;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_link_put(struct dp_link *dp_link)
> +{
> +	struct dp_link_private *link;
> +
> +	if (!dp_link)
> +		return;
> +
> +	link = container_of(dp_link, struct dp_link_private, dp_link);
> +
> +	devm_kfree(link->dev, link);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
> new file mode 100644
> index 0000000..607904b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_LINK_H_
> +#define _DP_LINK_H_
> +
> +#include "dp_aux.h"
> +
> +#define DS_PORT_STATUS_CHANGED 0x200
> +#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
> +
> +enum dp_link_voltage_level {
> +	DP_TRAIN_VOLTAGE_SWING_LVL_0	= 0,
> +	DP_TRAIN_VOLTAGE_SWING_LVL_1	= 1,
> +	DP_TRAIN_VOLTAGE_SWING_LVL_2	= 2,
> +	DP_TRAIN_VOLTAGE_SWING_MAX	= DP_TRAIN_VOLTAGE_SWING_LVL_2,
> +};
> +
> +enum dp_link_preemaphasis_level {
> +	DP_TRAIN_PRE_EMPHASIS_LVL_0	= 0,
> +	DP_TRAIN_PRE_EMPHASIS_LVL_1	= 1,
> +	DP_TRAIN_PRE_EMPHASIS_LVL_2	= 2,
> +	DP_TRAIN_PRE_EMPHASIS_MAX	= DP_TRAIN_PRE_EMPHASIS_LVL_2,
> +};
> +
> +struct dp_link_test_video {
> +	u32 test_video_pattern;
> +	u32 test_bit_depth;
> +	u32 test_dyn_range;
> +	u32 test_h_total;
> +	u32 test_v_total;
> +	u32 test_h_start;
> +	u32 test_v_start;
> +	u32 test_hsync_pol;
> +	u32 test_hsync_width;
> +	u32 test_vsync_pol;
> +	u32 test_vsync_width;
> +	u32 test_h_width;
> +	u32 test_v_height;
> +	u32 test_rr_d;
> +	u32 test_rr_n;
> +};
> +
> +struct dp_link_test_audio {
> +	u32 test_audio_sampling_rate;
> +	u32 test_audio_channel_count;
> +	u32 test_audio_pattern_type;
> +	u32 test_audio_period_ch_1;
> +	u32 test_audio_period_ch_2;
> +	u32 test_audio_period_ch_3;
> +	u32 test_audio_period_ch_4;
> +	u32 test_audio_period_ch_5;
> +	u32 test_audio_period_ch_6;
> +	u32 test_audio_period_ch_7;
> +	u32 test_audio_period_ch_8;
> +};
> +
> +struct dp_link_phy_params {
> +	u32 phy_test_pattern_sel;
> +	u8 v_level;
> +	u8 p_level;
> +};
> +
> +struct dp_link {
> +	u32 sink_request;
> +	u32 test_response;
> +	bool psm_enabled;
> +
> +	u8 sink_count;
> +	struct dp_link_test_video test_video;
> +	struct dp_link_test_audio test_audio;
> +	struct dp_link_phy_params phy_params;
> +	struct drm_dp_link link_params;
> +};
> +
> +/**
> + * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
> + * @tbd: test bit depth
> + *
> + * Returns the bits per pixel (bpp) to be used corresponding to the
> + * git bit depth value. This function assumes that bit depth has
> + * already been validated.
> + */
> +static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
> +{
> +	/*
> +	 * Few simplistic rules and assumptions made here:
> +	 *    1. Bit depth is per color component
> +	 *    2. If bit depth is unknown return 0
> +	 *    3. Assume 3 color components
> +	 */
> +	switch (tbd) {
> +	case DP_TEST_BIT_DEPTH_6:
> +		return 18;
> +	case DP_TEST_BIT_DEPTH_8:
> +		return 24;
> +	case DP_TEST_BIT_DEPTH_10:
> +		return 30;
> +	case DP_TEST_BIT_DEPTH_UNKNOWN:
> +	default:
> +		return 0;
> +	}
> +}
> +
> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
> +int dp_link_process_request(struct dp_link *dp_link);
> +int dp_link_get_colorimetry_config(struct dp_link *dp_link);
> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
> +bool dp_link_send_test_response(struct dp_link *dp_link);
> +int dp_link_psm_config(struct dp_link *dp_link,
> +		struct drm_dp_link *link_info, bool enable);
> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum);
> +
> +/**
> + * dp_link_get() - get the functionalities of dp test module
> + *
> + *
> + * return: a pointer to dp_link struct
> + */
> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
> +
> +/**
> + * dp_link_put() - releases the dp test module's resources
> + *
> + * @dp_link: an instance of dp_link module
> + *
> + */
> +void dp_link_put(struct dp_link *dp_link);
> +
> +#endif /* _DP_LINK_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> new file mode 100644
> index 0000000..a3150f4
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -0,0 +1,450 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include "dp_panel.h"
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_edid.h>
> +
> +#define DP_MAX_DS_PORT_COUNT 1
> +
> +struct dp_panel_private {
> +	struct device *dev;
> +	struct dp_panel dp_panel;
> +	struct dp_aux *aux;
> +	struct dp_link *link;
> +	struct dp_catalog *catalog;
> +	bool panel_on;
> +	bool aux_cfg_update_done;
> +};
> +
> +static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	size_t rlen;
> +	struct dp_panel_private *panel;
> +	struct drm_dp_link *link_info;
> +	u8 *dpcd, major = 0, minor = 0;
> +	u32 dfp_count = 0;
> +
> +	dpcd = dp_panel->dpcd;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	link_info = &dp_panel->link_info;
> +	rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
> +	if (rc < 0) {
> +		DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
> +		return rc;
> +	}
> +	major = (link_info->revision >> 4) & 0x0f;
> +	minor = link_info->revision & 0x0f;
> +	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> +	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> +	DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> +
> +	rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
> +		dpcd, (DP_RECEIVER_CAP_SIZE + 1));
> +	if (rlen < 0) {
> +		DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
> +		return -EINVAL;
> +	}
> +
> +	dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
> +						DP_DOWN_STREAM_PORT_COUNT;
> +	if (dfp_count > DP_MAX_DS_PORT_COUNT) {
> +		DRM_ERROR("DS port count %d greater that max (%d) supported\n",
> +			dfp_count, DP_MAX_DS_PORT_COUNT);
> +		return -EINVAL;
> +	}
> +	return rc;
> +}
> +
> +static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
> +		u32 mode_edid_bpp, u32 mode_pclk_khz)
> +{
> +	struct drm_dp_link *link_info;
> +	const u32 max_supported_bpp = 30, min_supported_bpp = 18;
> +	u32 bpp = 0, data_rate_khz = 0;
> +
> +	bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
> +
> +	link_info = &dp_panel->link_info;
> +	data_rate_khz = link_info->num_lanes * link_info->rate * 8;
> +
> +	while (bpp > min_supported_bpp) {
> +		if (mode_pclk_khz * bpp <= data_rate_khz)
> +			break;
> +		bpp -= 6;
> +	}
> +
> +	return bpp;
> +}
> +
> +static void dp_panel_set_test_mode(struct dp_panel_private *panel,
> +		struct dp_display_mode *mode)
> +{
> +	struct drm_display_mode *drm_mode = NULL;
> +	struct dp_link_test_video *test_info = NULL;
> +
> +	drm_mode = &mode->drm_mode;
> +	test_info = &panel->link->test_video;
> +
> +	drm_mode->hdisplay = test_info->test_h_width;
> +	drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total -
> +			(test_info->test_h_start + test_info->test_h_width);
> +	drm_mode->hsync_end = drm_mode->hsync_start + test_info->test_hsync_width;
> +	drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
> +						test_info->test_hsync_width;
> +
> +	drm_mode->vdisplay = test_info->test_v_height;
> +	drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total -
> +			(test_info->test_v_start + test_info->test_v_height);
> +	drm_mode->vsync_end = drm_mode->vsync_start + test_info->test_vsync_width;
> +	drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
> +						test_info->test_vsync_width;
> +
> +	drm_mode->vrefresh = test_info->test_rr_n;
> +	drm_mode->clock = test_info->test_h_total *
> +		test_info->test_v_total * drm_mode->vrefresh;
> +
> +	drm_mode->type = 0x48;
> +	drm_mode_set_name(drm_mode);
> +
> +	if (test_info->test_rr_d == 0)
> +		drm_mode->clock /= 1000;
> +	else
> +		drm_mode->clock /= 1001;
> +
> +	if (test_info->test_h_width == 640)
> +		drm_mode->clock = 25170;
> +}
> +
> +static int dp_panel_update_modes(struct drm_connector *connector,
> +	struct edid *edid)
> +{
> +	int rc = 0;
> +
> +	if (edid) {
> +		rc = drm_connector_update_edid_property(connector, edid);
> +		if (rc) {
> +			DRM_ERROR("failed to update edid property %d\n", rc);
> +			return rc;
> +		}
> +		rc = drm_add_edid_modes(connector, edid);
> +		DRM_DEBUG_DP("%s -", __func__);
> +		return rc;
> +	}
> +
> +	rc = drm_connector_update_edid_property(connector, NULL);
> +	if (rc)
> +		DRM_ERROR("failed to update edid property %d\n", rc);
> +
> +	return rc;
> +}
> +
> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> +	struct drm_connector *connector)
> +{
> +	int rc = 0, bw_code;
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel || !connector) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	rc = dp_panel_read_dpcd(dp_panel);
> +	bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> +	if (rc || !is_link_rate_valid(bw_code) ||
> +			!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> +			(bw_code > dp_panel->max_bw_code)) {
> +		DRM_ERROR("read dpcd failed %d\n", rc);
> +		return rc;
> +	}
> +	rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
> +			      drm_dp_is_branch(dp_panel->dpcd));
> +	if (rc) {
> +		DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
> +		return rc;
> +	}
> +
> +
> +	kfree(dp_panel->edid);
> +	dp_panel->edid = drm_get_edid(connector,
> +					      &panel->aux->drm_aux->ddc);
> +	if (!dp_panel->edid) {
> +		DRM_ERROR("panel edid read failed\n");
> +		return -EINVAL;
> +	}
> +
> +	if (panel->aux_cfg_update_done) {
> +		DRM_DEBUG_DP("read DPCD with updated AUX config\n");
> +		rc = dp_panel_read_dpcd(dp_panel);
> +		bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> +		if (rc || !is_link_rate_valid(bw_code) ||
> +				!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> +				(bw_code > dp_panel->max_bw_code)) {
> +			DRM_ERROR("read dpcd failed %d\n", rc);
> +			return rc;
> +		}
> +		panel->aux_cfg_update_done = false;
> +	}
> +
> +	return 0;
> +}
> +
> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
> +		u32 mode_edid_bpp, u32 mode_pclk_khz)
> +{
> +	struct dp_panel_private *panel;
> +	u32 bpp = mode_edid_bpp;
> +
> +	if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
> +		DRM_ERROR("invalid input\n");
> +		return 0;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (dp_panel->video_test)
> +		bpp = dp_link_bit_depth_to_bpp(
> +				panel->link->test_video.test_bit_depth);
> +	else
> +		bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
> +				mode_pclk_khz);
> +
> +	return bpp;
> +}
> +
> +int dp_panel_get_modes(struct dp_panel *dp_panel,
> +	struct drm_connector *connector, struct dp_display_mode *mode)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (dp_panel->video_test) {
> +		dp_panel_set_test_mode(panel, mode);
> +		return 1;
> +	} else if (dp_panel->edid) {
> +		return dp_panel_update_modes(connector, dp_panel->edid);
> +	}
> +
> +	return 0;
> +}
> +
> +u8 dp_panel_get_edid_checksum(struct edid *edid)
> +{
> +	struct edid *last_block;
> +	u8 *raw_edid;
> +	bool is_edid_corrupt;
> +
> +	if (!edid) {
> +		DRM_ERROR("invalid edid input\n");
> +		return 0;
> +	}
> +
> +	raw_edid = (u8 *)edid;
> +	raw_edid += (edid->extensions * EDID_LENGTH);
> +	last_block = (struct edid *)raw_edid;
> +
> +	/* block type extension */
> +	drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
> +	if (!is_edid_corrupt)
> +		return last_block->checksum;
> +
> +	DRM_ERROR("Invalid block, no checksum\n");
> +	return 0;
> +}
> +
> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
> +		u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
> +
> +		dp_link_send_edid_checksum(panel->link, checksum);
> +		dp_link_send_test_response(panel->link);
> +	}
> +}
> +
> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
> +{
> +	struct dp_catalog *catalog;
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel) {
> +		DRM_ERROR("invalid input\n");
> +		return;
> +	}
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	catalog = panel->catalog;
> +
> +	if (!panel->panel_on) {
> +		DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
> +		return;
> +	}
> +
> +	if (!enable) {
> +		dp_catalog_panel_tpg_disable(catalog);
> +		return;
> +	}
> +
> +	DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
> +	dp_catalog_panel_tpg_enable(catalog, &panel->dp_panel.dp_mode.drm_mode);
> +}
> +
> +int dp_panel_timing_cfg(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	u32 data, total_ver, total_hor;
> +	struct dp_catalog *catalog;
> +	struct dp_panel_private *panel;
> +	struct drm_display_mode *drm_mode;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +	catalog = panel->catalog;
> +	drm_mode = &panel->dp_panel.dp_mode.drm_mode;
> +
> +	DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
> +		drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
> +		drm_mode->hsync_start - drm_mode->hdisplay,
> +		drm_mode->hsync_end - drm_mode->hsync_start);
> +
> +	DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
> +		drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
> +		drm_mode->vsync_start - drm_mode->vdisplay,
> +		drm_mode->vsync_end - drm_mode->vsync_start);
> +
> +	total_hor = drm_mode->htotal;
> +
> +	total_ver = drm_mode->vtotal;
> +
> +	data = total_ver;
> +	data <<= 16;
> +	data |= total_hor;
> +
> +	catalog->total = data;
> +
> +	data = (drm_mode->vtotal - drm_mode->vsync_start);
> +	data <<= 16;
> +	data |= (drm_mode->htotal - drm_mode->hsync_start);
> +
> +	catalog->sync_start = data;
> +
> +	data = drm_mode->vsync_end - drm_mode->vsync_start;
> +	data <<= 16;
> +	data |= (panel->dp_panel.dp_mode.v_active_low << 31);
> +	data |= drm_mode->hsync_end - drm_mode->hsync_start;
> +	data |= (panel->dp_panel.dp_mode.h_active_low << 15);
> +
> +	catalog->width_blanking = data;
> +
> +	data = drm_mode->vdisplay;
> +	data <<= 16;
> +	data |= drm_mode->hdisplay;
> +
> +	catalog->dp_active = data;
> +
> +	dp_catalog_panel_timing_cfg(catalog);
> +	panel->panel_on = true;
> +
> +	return rc;
> +}
> +
> +int dp_panel_init_panel_info(struct dp_panel *dp_panel)
> +{
> +	int rc = 0;
> +	struct drm_display_mode *drm_mode;
> +
> +	drm_mode = &dp_panel->dp_mode.drm_mode;
> +
> +	/*
> +	 * print resolution info as this is a result
> +	 * of user initiated action of cable connection
> +	 */
> +	DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
> +	DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
> +		drm_mode->vdisplay, drm_mode->vrefresh);
> +	DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
> +			drm_mode->htotal - drm_mode->hsync_end,
> +			drm_mode->hsync_start - drm_mode->hdisplay,
> +			drm_mode->hsync_end - drm_mode->hsync_start);
> +	DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
> +			drm_mode->vtotal - drm_mode->vsync_end,
> +			drm_mode->vsync_start - drm_mode->vdisplay,
> +			drm_mode->vsync_end - drm_mode->vsync_start);
> +	DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
> +	DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
> +
> +	dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32, dp_panel->dp_mode.bpp, 30));
> +	DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
> +
> +	return rc;
> +}
> +
> +struct dp_panel *dp_panel_get(struct dp_panel_in *in)
> +{
> +	int rc = 0;
> +	struct dp_panel_private *panel;
> +	struct dp_panel *dp_panel;
> +
> +	if (!in->dev || !in->catalog || !in->aux || !in->link) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
> +	if (!panel) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	panel->dev = in->dev;
> +	panel->aux = in->aux;
> +	panel->catalog = in->catalog;
> +	panel->link = in->link;
> +
> +	dp_panel = &panel->dp_panel;
> +	dp_panel->max_bw_code = DP_LINK_BW_8_1;
> +	panel->aux_cfg_update_done = false;
> +
> +	return dp_panel;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_panel_put(struct dp_panel *dp_panel)
> +{
> +	struct dp_panel_private *panel;
> +
> +	if (!dp_panel)
> +		return;
> +
> +	panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> +
> +	kfree(dp_panel->edid);
> +	dp_panel->edid = NULL;
> +	devm_kfree(panel->dev, panel);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
> new file mode 100644
> index 0000000..68c5650
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_PANEL_H_
> +#define _DP_PANEL_H_
> +
> +#include <drm/msm_drm.h>
> +
> +#include "dp_aux.h"
> +#include "dp_link.h"
> +#include "dp_extcon.h"
> +
> +struct edid;
> +
> +#define DP_MAX_DOWNSTREAM_PORTS 0x10
> +
> +struct dp_display_mode {
> +	struct drm_display_mode drm_mode;
> +	u32 capabilities;
> +	u32 bpp;
> +	u32 h_active_low;
> +	u32 v_active_low;
> +};
> +
> +struct dp_panel_in {
> +	struct device *dev;
> +	struct dp_aux *aux;
> +	struct dp_link *link;
> +	struct dp_catalog *catalog;
> +};
> +
> +struct dp_panel {
> +	/* dpcd raw data */
> +	u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
> +
> +	struct drm_dp_link link_info;
> +	struct drm_dp_desc desc;
> +	struct edid *edid;
> +	struct drm_connector *connector;
> +	struct dp_display_mode dp_mode;
> +	bool video_test;
> +
> +	u32 vic;
> +	u32 max_pclk_khz;
> +
> +	u32 max_bw_code;
> +};
> +
> +int dp_panel_init_panel_info(struct dp_panel *dp_panel);
> +int dp_panel_deinit(struct dp_panel *dp_panel);
> +int dp_panel_timing_cfg(struct dp_panel *dp_panel);
> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> +		struct drm_connector *connector);
> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 mode_max_bpp,
> +			u32 mode_pclk_khz);
> +int dp_panel_get_modes(struct dp_panel *dp_panel,
> +		struct drm_connector *connector, struct dp_display_mode *mode);
> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
> +
> +/**
> + * is_link_rate_valid() - validates the link rate
> + * @lane_rate: link rate requested by the sink
> + *
> + * Returns true if the requested link rate is supported.
> + */
> +static inline bool is_link_rate_valid(u32 bw_code)
> +{
> +	return (bw_code == DP_LINK_BW_1_62 ||
> +		bw_code == DP_LINK_BW_2_7 ||
> +		bw_code == DP_LINK_BW_5_4 ||
> +		bw_code == DP_LINK_BW_8_1);
> +}
> +
> +/**
> + * dp_link_is_lane_count_valid() - validates the lane count
> + * @lane_count: lane count requested by the sink
> + *
> + * Returns true if the requested lane count is supported.
> + */
> +static inline bool is_lane_count_valid(u32 lane_count)
> +{
> +	return (lane_count == 1 ||
> +		lane_count == 2 ||
> +		lane_count == 4);
> +}
> +
> +struct dp_panel *dp_panel_get(struct dp_panel_in *in);
> +void dp_panel_put(struct dp_panel *dp_panel);
> +#endif /* _DP_PANEL_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
> new file mode 100644
> index 0000000..3fa2a1f
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> @@ -0,0 +1,496 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/of_gpio.h>
> +
> +#include "dp_parser.h"
> +
> +static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
> +	.num = 2,
> +	.regs = {
> +		{"vdda-1p2", 21800, 4 },	/* 1.2 V */
> +		{"vdda-0p9", 36000, 32 },	/* 0.9 V */
> +	},
> +};
> +
> +static int msm_dss_ioremap_byname(struct platform_device *pdev,
> +			   struct dss_io_data *io_data, const char *name)
> +{
> +	struct resource *res = NULL;
> +
> +	if (!io_data) {
> +		DRM_ERROR("%pS->%s: invalid input\n",
> +			__builtin_return_address(0), __func__);
> +		return -EINVAL;
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
> +	if (!res) {
> +		DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
> +			__builtin_return_address(0), __func__, name);
> +		return -ENODEV;
> +	}
> +
> +	io_data->len = (u32)resource_size(res);
> +	io_data->base = ioremap(res->start, io_data->len);
> +	if (!io_data->base) {
> +		DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
> +			__builtin_return_address(0), __func__, name);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static void msm_dss_iounmap(struct dss_io_data *io_data)
> +{
> +	if (!io_data) {
> +		DRM_ERROR("%pS->%s: invalid input\n",
> +			__builtin_return_address(0), __func__);
> +		return;
> +	}
> +
> +	if (io_data->base) {
> +		iounmap(io_data->base);
> +		io_data->base = NULL;
> +	}
> +	io_data->len = 0;
> +}
> +
> +static void dp_parser_unmap_io_resources(struct dp_parser *parser)
> +{
> +	struct dp_io *io = &parser->io;
> +
> +	msm_dss_iounmap(&io->dp_ahb);
> +	msm_dss_iounmap(&io->dp_aux);
> +	msm_dss_iounmap(&io->dp_link);
> +	msm_dss_iounmap(&io->dp_p0);
> +	msm_dss_iounmap(&io->phy_io);
> +	msm_dss_iounmap(&io->ln_tx0_io);
> +	msm_dss_iounmap(&io->ln_tx0_io);
> +	msm_dss_iounmap(&io->dp_pll_io);
> +	msm_dss_iounmap(&io->dp_cc_io);
> +	msm_dss_iounmap(&io->usb3_dp_com);
> +	msm_dss_iounmap(&io->qfprom_io);
> +}
> +
> +static int dp_parser_ctrl_res(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	u32 index;
> +	struct platform_device *pdev = parser->pdev;
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +	struct dp_io *io = &parser->io;
> +
> +	rc = of_property_read_u32(of_node, "cell-index", &index);
> +	if (rc) {
> +		DRM_ERROR("cell-index not specified, rc=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
> +	if (rc) {
> +		DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
> +	if (rc) {
> +		DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
> +		goto err;
> +	}
> +
> +	rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
> +	if (rc) {
> +		DRM_ERROR("unable to remap dp MMSS_CC resources\n");
> +		goto err;
> +	}
> +
> +	if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
> +		pr_warn("unable to remap dp qfprom resources\n");
> +
> +	return 0;
> +err:
> +	dp_parser_unmap_io_resources(parser);
> +	return rc;
> +}
> +
> +static const char *dp_get_phy_aux_config_property(u32 cfg_type)
> +{
> +	switch (cfg_type) {
> +	case PHY_AUX_CFG0:
> +		return "qcom,aux-cfg0-settings";
> +	case PHY_AUX_CFG1:
> +		return "qcom,aux-cfg1-settings";
> +	case PHY_AUX_CFG2:
> +		return "qcom,aux-cfg2-settings";
> +	case PHY_AUX_CFG3:
> +		return "qcom,aux-cfg3-settings";
> +	case PHY_AUX_CFG4:
> +		return "qcom,aux-cfg4-settings";
> +	case PHY_AUX_CFG5:
> +		return "qcom,aux-cfg5-settings";
> +	case PHY_AUX_CFG6:
> +		return "qcom,aux-cfg6-settings";
> +	case PHY_AUX_CFG7:
> +		return "qcom,aux-cfg7-settings";
> +	case PHY_AUX_CFG8:
> +		return "qcom,aux-cfg8-settings";
> +	case PHY_AUX_CFG9:
> +		return "qcom,aux-cfg9-settings";
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +static int dp_parser_aux(struct dp_parser *parser)
> +{
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +	int len = 0, i = 0, j = 0, config_count = 0;
> +	const char *data;
> +
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		const char *property = dp_get_phy_aux_config_property(i);
> +
> +		data = of_get_property(of_node, property, &len);
> +		if (!data) {
> +			DRM_ERROR("Unable to read %s\n", property);
> +			goto error;
> +		}
> +
> +		config_count = len - 1;
> +		if (config_count < 1 || /* minimum config count = 1 */
> +			config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
> +			DRM_ERROR("Invalid config count (%d) configs for %s\n",
> +					config_count, property);
> +			goto error;
> +		}
> +
> +		parser->aux_cfg[i].offset = data[0];
> +		parser->aux_cfg[i].cfg_cnt = config_count;
> +		DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
> +				property,
> +				parser->aux_cfg[i].offset,
> +				parser->aux_cfg[i].cfg_cnt);
> +		for (j = 1; j < len; j++) {
> +			parser->aux_cfg[i].lut[j - 1] = data[j];
> +			DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
> +					property,
> +					i,
> +					parser->aux_cfg[i].lut[j - 1]);
> +		}
> +	}
> +		return 0;
> +
> +error:
> +	for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> +		parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
> +	}
> +	return -EINVAL;
> +}
> +
> +static int dp_parser_misc(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct device_node *of_node = parser->pdev->dev.of_node;
> +
> +	rc = of_property_read_u32(of_node,
> +		"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
> +	if (rc)
> +		parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
> +
> +	return 0;
> +}
> +
> +static int dp_parser_pinctrl(struct dp_parser *parser)
> +{
> +	struct dp_pinctrl *pinctrl = &parser->pinctrl;
> +
> +	pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
> +
> +	if (IS_ERR_OR_NULL(pinctrl->pin)) {
> +		DRM_ERROR("failed to get pinctrl, rc=%d\n",
> +					PTR_ERR_OR_ZERO(pinctrl->pin));
> +		return -EINVAL;
> +	}
> +
> +	pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
> +					"mdss_dp_active");
> +	if (IS_ERR_OR_NULL(pinctrl->state_active)) {
> +		DRM_ERROR("failed to get pinctrl active state, %d\n",
> +			PTR_ERR_OR_ZERO(pinctrl->state_active));
> +		return -EINVAL;
> +	}
> +
> +	pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
> +					"mdss_dp_sleep");
> +	if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
> +		DRM_ERROR("failed to get pinctrl suspend state, %d\n",
> +			PTR_ERR_OR_ZERO(pinctrl->state_suspend));
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_parser_gpio(struct dp_parser *parser)
> +{
> +	struct device *dev = &parser->pdev->dev;
> +	struct device_node *of_node = dev->of_node;
> +
> +	parser->usbplug_cc_gpio = of_get_named_gpio(of_node, "qcom,usbplug-cc-gpio", 0);
> +	if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
> +			DRM_ERROR("usbplug-cc-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio", 0);
> +	if (!gpio_is_valid(parser->aux_en_gpio)) {
> +			DRM_ERROR("aux-en-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	parser->aux_sel_gpio = of_get_named_gpio(of_node, "qcom,aux-sel-gpio", 0);
> +	if (!gpio_is_valid(parser->aux_sel_gpio)) {
> +			DRM_ERROR("aux-sel-gpio not specified\n");
> +			return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static inline bool dp_parser_check_prefix(const char *clk_prefix, const char *clk_name)
> +{
> +	return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
> +}
> +
> +static int dp_parser_init_clk_data(struct dp_parser *parser)
> +{
> +	int num_clk = 0, i = 0, rc = 0;
> +	int core_clk_count = 0, ctrl_clk_count = 0;
> +	const char *clk_name;
> +	struct device *dev = &parser->pdev->dev;
> +	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> +	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	num_clk = of_property_count_strings(dev->of_node, "clock-names");
> +	if (num_clk <= 0) {
> +		DRM_ERROR("no clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < num_clk; i++) {
> +		rc = of_property_read_string_index(dev->of_node,
> +				"clock-names", i, &clk_name);
> +		if (rc) {
> +			DRM_ERROR("error reading clock-names %d\n", rc);
> +			return rc;
> +		}
> +
> +		if (dp_parser_check_prefix("core", clk_name))
> +			core_clk_count++;
> +
> +		if (dp_parser_check_prefix("ctrl", clk_name))
> +			ctrl_clk_count++;
> +	}
> +
> +	/* Initialize the CORE power module */
> +	if (core_clk_count == 0) {
> +		DRM_ERROR("no core clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	core_power->num_clk = core_clk_count;
> +	core_power->clk_config = devm_kzalloc(dev,
> +			sizeof(struct dss_clk) * core_power->num_clk,
> +			GFP_KERNEL);
> +	if (!core_power->clk_config) {
> +		return -EINVAL;
> +	}
> +
> +	/* Initialize the CTRL power module */
> +	if (ctrl_clk_count == 0) {
> +		DRM_ERROR("no ctrl clocks are defined\n");
> +		return -EINVAL;
> +	}
> +
> +	ctrl_power->num_clk = ctrl_clk_count;
> +	ctrl_power->clk_config = devm_kzalloc(dev,
> +			sizeof(struct dss_clk) * ctrl_power->num_clk,
> +			GFP_KERNEL);
> +	if (!ctrl_power->clk_config) {
> +		ctrl_power->num_clk = 0;
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_parser_clock(struct dp_parser *parser)
> +{
> +	int rc = 0, i = 0;
> +	int num_clk = 0;
> +	int core_clk_index = 0, ctrl_clk_index = 0;
> +	int core_clk_count = 0, ctrl_clk_count = 0;
> +	const char *clk_name;
> +	struct device *dev = &parser->pdev->dev;
> +	struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> +	struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	core_power = &parser->mp[DP_CORE_PM];
> +	ctrl_power = &parser->mp[DP_CTRL_PM];
> +
> +	rc =  dp_parser_init_clk_data(parser);
> +	if (rc) {
> +		DRM_ERROR("failed to initialize power data %d\n", rc);
> +		return -EINVAL;
> +	}
> +
> +	core_clk_count = core_power->num_clk;
> +	ctrl_clk_count = ctrl_power->num_clk;
> +
> +	num_clk = core_clk_count + ctrl_clk_count;
> +
> +	for (i = 0; i < num_clk; i++) {
> +		rc = of_property_read_string_index(dev->of_node, "clock-names",
> +				i, &clk_name);
> +		if (rc) {
> +			 DRM_ERROR("error reading clock-names %d\n", rc);
> +			return rc;
> +		}
> +		if (dp_parser_check_prefix("core", clk_name) &&
> +				core_clk_index < core_clk_count) {
> +			struct dss_clk *clk =
> +				&core_power->clk_config[core_clk_index];
> +			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> +			clk->type = DSS_CLK_AHB;
> +			core_clk_index++;
> +		} else if (dp_parser_check_prefix("ctrl", clk_name) &&
> +			   ctrl_clk_index < ctrl_clk_count) {
> +			struct dss_clk *clk =
> +				&ctrl_power->clk_config[ctrl_clk_index];
> +			strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> +			ctrl_clk_index++;
> +
> +			if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
> +			  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
> +				clk->type = DSS_CLK_PCLK;
> +			else
> +				clk->type = DSS_CLK_AHB;
> +		}
> +	}
> +
> +	DRM_DEBUG_DP("clock parsing successful\n");
> +
> +	return 0;
> +}
> +
> +static int dp_parser_parse(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +
> +	if (!parser) {
> +		DRM_ERROR("invalid input\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Default: We assume that PHY is shared between USB and DP (Combo phy) */
> +	parser->combo_phy_en = true;
> +
> +	rc = dp_parser_ctrl_res(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_aux(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_misc(parser);
> +	if (rc)
> +		return rc;
> +
> +	rc = dp_parser_clock(parser);
> +	if (rc)
> +		return rc;
> +
> +	/* Map the corresponding regulator information according to
> +	 * version. Currently, since we only have one supported platform,
> +	 * mapping the regulator directly.
> +	 */
> +	parser->regulator_cfg = &sdm845_dp_reg_cfg;
> +
> +	rc = dp_parser_gpio(parser);
> +	if (rc) {
> +		DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is disabled\n");
> +		parser->combo_phy_en = false;
> +		return rc;
> +	}
> +
> +	rc = dp_parser_pinctrl(parser);
> +	return rc;
> +}
> +
> +struct dp_parser *dp_parser_get(struct platform_device *pdev)
> +{
> +	struct dp_parser *parser;
> +
> +	parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
> +	if (!parser)
> +		return ERR_PTR(-ENOMEM);
> +
> +	parser->parse = dp_parser_parse;
> +	parser->pdev = pdev;
> +
> +	return parser;
> +}
> +
> +void dp_parser_put(struct dp_parser *parser)
> +{
> +
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
> new file mode 100644
> index 0000000..b606b40
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
> @@ -0,0 +1,222 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_PARSER_H_
> +#define _DP_PARSER_H_
> +
> +#define DP_LABEL "MDSS DP DISPLAY"
> +#define AUX_CFG_LEN	10
> +#define DP_MAX_PIXEL_CLK_KHZ	675000
> +
> +enum dp_pm_type {
> +	DP_CORE_PM,
> +	DP_CTRL_PM,
> +	DP_PHY_PM,
> +	DP_MAX_PM
> +};
> +
> +struct dss_io_data {
> +	u32 len;
> +	void __iomem *base;
> +};
> +
> +static inline const char *dp_parser_pm_name(enum dp_pm_type module)
> +{
> +	switch (module) {
> +	case DP_CORE_PM:	return "DP_CORE_PM";
> +	case DP_CTRL_PM:	return "DP_CTRL_PM";
> +	case DP_PHY_PM:		return "DP_PHY_PM";
> +	default:		return "???";
> +	}
> +}
> +
> +/**
> + * struct dp_display_data  - display related device tree data.
> + *
> + * @ctrl_node: referece to controller device
> + * @phy_node:  reference to phy device
> + * @is_active: is the controller currently active
> + * @name: name of the display
> + * @display_type: type of the display
> + */
> +struct dp_display_data {
> +	struct device_node *ctrl_node;
> +	struct device_node *phy_node;
> +	bool is_active;
> +	const char *name;
> +	const char *display_type;
> +};
> +
> +/**
> + * struct dp_ctrl_resource - controller's IO related data
> + *
> + * @dp_ahb: controller's ahb mapped memory address
> + * @dp_aux: controller's aux mapped memory address
> + * @dp_link: controller's link mapped memory address
> + * @dp_p0: controller's p0 mapped memory address
> + * @phy_io: phy's mapped memory address
> + * @ln_tx0_io: USB-DP lane TX0's mapped memory address
> + * @ln_tx1_io: USB-DP lane TX1's mapped memory address
> + * @dp_cc_io: DP cc's mapped memory address
> + * @qfprom_io: qfprom's mapped memory address
> + * @dp_pll_io: DP PLL mapped memory address
> + * @usb3_dp_com: USB3 DP PHY combo mapped memory address
> + */
> +struct dp_io {
> +	struct dss_io_data ctrl_io;
> +	struct dss_io_data dp_ahb;
> +	struct dss_io_data dp_aux;
> +	struct dss_io_data dp_link;
> +	struct dss_io_data dp_p0;
> +	struct dss_io_data phy_io;
> +	struct dss_io_data ln_tx0_io;
> +	struct dss_io_data ln_tx1_io;
> +	struct dss_io_data dp_cc_io;
> +	struct dss_io_data qfprom_io;
> +	struct dss_io_data dp_pll_io;
> +	struct dss_io_data usb3_dp_com;
> +};
> +
> +/**
> + * struct dp_pinctrl - DP's pin control
> + *
> + * @pin: pin-controller's instance
> + * @state_active: active state pin control
> + * @state_hpd_active: hpd active state pin control
> + * @state_suspend: suspend state pin control
> + */
> +struct dp_pinctrl {
> +	struct pinctrl *pin;
> +	struct pinctrl_state *state_active;
> +	struct pinctrl_state *state_hpd_active;
> +	struct pinctrl_state *state_suspend;
> +};
> +
> +#define DP_ENUM_STR(x)	#x
> +#define DP_AUX_CFG_MAX_VALUE_CNT 3
> +/**
> + * struct dp_aux_cfg - DP's AUX configuration settings
> + *
> + * @cfg_cnt: count of the configurable settings for the AUX register
> + * @current_index: current index of the AUX config lut
> + * @offset: register offset of the AUX config register
> + * @lut: look up table for the AUX config values for this register
> + */
> +struct dp_aux_cfg {
> +	u32 cfg_cnt;
> +	u32 current_index;
> +	u32 offset;
> +	u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
> +};
> +
> +/* PHY AUX config registers */
> +enum dp_phy_aux_config_type {
> +	PHY_AUX_CFG0,
> +	PHY_AUX_CFG1,
> +	PHY_AUX_CFG2,
> +	PHY_AUX_CFG3,
> +	PHY_AUX_CFG4,
> +	PHY_AUX_CFG5,
> +	PHY_AUX_CFG6,
> +	PHY_AUX_CFG7,
> +	PHY_AUX_CFG8,
> +	PHY_AUX_CFG9,
> +	PHY_AUX_CFG_MAX,
> +};
> +
> +#define DP_DEV_REGULATOR_MAX	4
> +
> +/* Regulators for DP devices */
> +struct dp_reg_entry {
> +	char name[32];
> +	int enable_load;
> +	int disable_load;
> +};
> +
> +struct dp_regulator_cfg {
> +	int num;
> +	struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
> +};
> +
> +
> +static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
> +{
> +	switch (cfg_type) {
> +	case PHY_AUX_CFG0:
> +		return DP_ENUM_STR(PHY_AUX_CFG0);
> +	case PHY_AUX_CFG1:
> +		return DP_ENUM_STR(PHY_AUX_CFG1);
> +	case PHY_AUX_CFG2:
> +		return DP_ENUM_STR(PHY_AUX_CFG2);
> +	case PHY_AUX_CFG3:
> +		return DP_ENUM_STR(PHY_AUX_CFG3);
> +	case PHY_AUX_CFG4:
> +		return DP_ENUM_STR(PHY_AUX_CFG4);
> +	case PHY_AUX_CFG5:
> +		return DP_ENUM_STR(PHY_AUX_CFG5);
> +	case PHY_AUX_CFG6:
> +		return DP_ENUM_STR(PHY_AUX_CFG6);
> +	case PHY_AUX_CFG7:
> +		return DP_ENUM_STR(PHY_AUX_CFG7);
> +	case PHY_AUX_CFG8:
> +		return DP_ENUM_STR(PHY_AUX_CFG8);
> +	case PHY_AUX_CFG9:
> +		return DP_ENUM_STR(PHY_AUX_CFG9);
> +	default:
> +		return "unknown";
> +	}
> +}
> +
> +/**
> + * struct dp_parser - DP parser's data exposed to clients
> + *
> + * @pdev: platform data of the client
> + * @mp: gpio, regulator and clock related data
> + * @pinctrl: pin-control related data
> + * @aux_en_gpio: GPIO to control AUX data when using combo PHY
> + * @aux_sel_gpio: GPIO to control plug orientation when using combo PHY
> + * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
> + * @combo_phy_en: Boolean to check whether combo PHY is used
> + * @disp_data: controller's display related data
> + * @parse: function to be called by client to parse device tree.
> + */
> +struct dp_parser {
> +	struct platform_device *pdev;
> +	struct dss_module_power mp[DP_MAX_PM];
> +	struct dp_pinctrl pinctrl;
> +	unsigned int aux_en_gpio;
> +	unsigned int aux_sel_gpio;
> +	unsigned int usbplug_cc_gpio;
> +	bool combo_phy_en;
> +	struct dp_io io;
> +	struct dp_display_data disp_data;
> +	const struct dp_regulator_cfg *regulator_cfg;
> +	u8 l_map[4];
> +	struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
> +	u32 max_pclk_khz;
> +
> +	int (*parse)(struct dp_parser *parser);
> +};
> +
> +/**
> + * dp_parser_get() - get the DP's device tree parser module
> + *
> + * @pdev: platform data of the client
> + * return: pointer to dp_parser structure.
> + *
> + * This function provides client capability to parse the
> + * device tree and populate the data structures. The data
> + * related to clock, regulators, pin-control and other
> + * can be parsed using this module.
> + */
> +struct dp_parser *dp_parser_get(struct platform_device *pdev);
> +
> +/**
> + * dp_parser_put() - cleans the dp_parser module
> + *
> + * @parser: pointer to the parser's data.
> + */
> +void dp_parser_put(struct dp_parser *parser);
> +#endif
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> new file mode 100644
> index 0000000..3fa4c9b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -0,0 +1,558 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt)	"[drm-dp] %s: " fmt, __func__
> +
> +#include <linux/clk.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of_gpio.h>
> +#include "dp_power.h"
> +
> +struct dp_power_private {
> +	struct dp_parser *parser;
> +	struct platform_device *pdev;
> +	struct clk *pixel_clk_rcg;
> +	struct clk *link_clk_src;
> +	struct clk *pixel_provider;
> +	struct clk *link_provider;
> +	struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
> +
> +	struct dp_power dp_power;
> +};
> +
> +static void dp_power_regulator_disable(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	int num = power->parser->regulator_cfg->num;
> +	int i;
> +
> +	DBG("");
> +	for (i = num - 1; i >= 0; i--)
> +		if (regs[i].disable_load >= 0)
> +			regulator_set_load(s[i].consumer,
> +					   regs[i].disable_load);
> +
> +	regulator_bulk_disable(num, s);
> +}
> +
> +static int dp_power_regulator_enable(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	int num = power->parser->regulator_cfg->num;
> +	int ret, i;
> +
> +	DBG("");
> +	for (i = 0; i < num; i++) {
> +		if (regs[i].enable_load >= 0) {
> +			ret = regulator_set_load(s[i].consumer,
> +						 regs[i].enable_load);
> +			if (ret < 0) {
> +				pr_err("regulator %d set op mode failed, %d\n",
> +					i, ret);
> +				goto fail;
> +			}
> +		}
> +	}
> +
> +	ret = regulator_bulk_enable(num, s);
> +	if (ret < 0) {
> +		pr_err("regulator enable failed, %d\n", ret);
> +		goto fail;
> +	}
> +
> +	return 0;
> +
> +fail:
> +	for (i--; i >= 0; i--)
> +		regulator_set_load(s[i].consumer, regs[i].disable_load);
> +	return ret;
> +}
> +
> +static int dp_power_regulator_init(struct dp_power_private *power)
> +{
> +	struct regulator_bulk_data *s = power->supplies;
> +	const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> +	struct platform_device *pdev = power->pdev;
> +	int num = power->parser->regulator_cfg->num;
> +	int i, ret;
> +
> +	for (i = 0; i < num; i++)
> +		s[i].supply = regs[i].name;
> +
> +	ret = devm_regulator_bulk_get(&pdev->dev, num, s);
> +	if (ret < 0) {
> +		pr_err("%s: failed to init regulator, ret=%d\n",
> +						__func__, ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_pinctrl_set(struct dp_power_private *power, bool active)
> +{
> +	int rc = -EFAULT;
> +	struct pinctrl_state *pin_state;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return 0;
> +
> +	pin_state = active ? parser->pinctrl.state_active
> +				: parser->pinctrl.state_suspend;
> +
> +	rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
> +	if (rc) {
> +		DRM_ERROR("can not set %s pins\n",
> +			active ? "dp_active" : "dp_sleep");
> +		return rc;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_clk_init(struct dp_power_private *power)
> +{
> +	int rc = 0;
> +	struct dss_module_power *core, *ctrl;
> +	struct device *dev = &power->pdev->dev;
> +
> +	core = &power->parser->mp[DP_CORE_PM];
> +	ctrl = &power->parser->mp[DP_CTRL_PM];
> +
> +	if (power->parser->pll && power->parser->pll->get_provider) {
> +		rc = power->parser->pll->get_provider(power->parser->pll,
> +				&power->link_provider, &power->pixel_provider);
> +		if (rc) {
> +			pr_info("%s: can't get provider from pll, don't set parent\n",
> +				__func__);
> +			return 0;
> +		}
> +	}
> +
> +	rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
> +	if (rc) {
> +		DRM_ERROR("failed to get %s clk. err=%d\n",
> +			dp_parser_pm_name(DP_CORE_PM), rc);
> +		return rc;
> +	}
> +
> +	rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
> +	if (rc) {
> +		DRM_ERROR("failed to get %s clk. err=%d\n",
> +			dp_parser_pm_name(DP_CTRL_PM), rc);
> +		msm_dss_put_clk(core->clk_config, core->num_clk);
> +		return -ENODEV;
> +	}
> +
> +	power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
> +	if (IS_ERR(power->pixel_clk_rcg)) {
> +		DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
> +		power->pixel_clk_rcg = NULL;
> +		msm_dss_put_clk(core->clk_config, core->num_clk);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dp_power_clk_deinit(struct dp_power_private *power)
> +{
> +	struct dss_module_power *core, *ctrl;
> +
> +	core = &power->parser->mp[DP_CORE_PM];
> +	ctrl = &power->parser->mp[DP_CTRL_PM];
> +
> +	if (!core || !ctrl) {
> +		DRM_ERROR("invalid power_data\n");
> +		return -EINVAL;
> +	}
> +
> +	msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
> +	msm_dss_put_clk(core->clk_config, core->num_clk);
> +	return 0;
> +}
> +
> +static int dp_power_clk_set_rate(struct dp_power_private *power,
> +		enum dp_pm_type module, bool enable)
> +{
> +	int rc = 0;
> +	struct dss_module_power *mp = &power->parser->mp[module];
> +
> +	if (enable) {
> +		rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> +		if (rc) {
> +			DRM_ERROR("failed to set clks rate.\n");
> +			return rc;
> +		}
> +	}
> +
> +	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
> +	if (rc) {
> +		DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
> +		return rc;
> +	}
> +
> +	return 0;
> +}
> +
> +int dp_power_clk_enable(struct dp_power *dp_power,
> +		enum dp_pm_type pm_type, bool enable)
> +{
> +	int rc = 0;
> +	struct dss_module_power *mp;
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +	mp = &power->parser->mp[pm_type];
> +
> +	if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
> +		DRM_ERROR("unsupported power module: %s\n",
> +				dp_parser_pm_name(pm_type));
> +		return -EINVAL;
> +	}
> +
> +	if (enable) {
> +		if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
> +			DRM_DEBUG_DP("core clks already enabled\n");
> +			return 0;
> +		}
> +
> +		if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
> +			DRM_DEBUG_DP("links clks already enabled\n");
> +			return 0;
> +		}
> +
> +		if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
> +			DRM_DEBUG_DP("Need to enable core clks before link clks\n");
> +
> +			rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
> +			if (rc) {
> +				DRM_ERROR("failed to enable clks: %s. err=%d\n",
> +					dp_parser_pm_name(DP_CORE_PM), rc);
> +				return rc;
> +			}
> +			dp_power->core_clks_on = true;
> +		}
> +	}
> +
> +	rc = dp_power_clk_set_rate(power, pm_type, enable);
> +	if (rc) {
> +		DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
> +			enable ? "enable" : "disable",
> +			dp_parser_pm_name(pm_type), rc);
> +			return rc;
> +	}
> +
> +	if (pm_type == DP_CORE_PM)
> +		dp_power->core_clks_on = enable;
> +	else
> +		dp_power->link_clks_on = enable;
> +
> +	DRM_DEBUG_DP("%s clocks for %s\n",
> +			enable ? "enable" : "disable",
> +			dp_parser_pm_name(pm_type));
> +	DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
> +		dp_power->link_clks_on ? "on" : "off",
> +		dp_power->core_clks_on ? "on" : "off");
> +
> +	return 0;
> +}
> +
> +static int dp_power_request_gpios(struct dp_power_private *power)
> +{
> +	int rc = 0;
> +	struct device *dev = &power->pdev->dev;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (gpio_is_valid(parser->aux_en_gpio)) {
> +		rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
> +		if (rc) {
> +			DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	if (gpio_is_valid(parser->aux_sel_gpio)) {
> +		rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
> +		if (rc) {
> +			DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	if (gpio_is_valid(parser->usbplug_cc_gpio)) {
> +		rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
> +		if (rc) {
> +			DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
> +			return rc;
> +		}
> +	}
> +	return 0;
> +}
> +
> +static void dp_power_set_gpio(struct dp_power_private *power, bool flip)
> +{
> +	struct dp_parser *parser = power->parser;
> +
> +	if (gpio_is_valid(parser->aux_sel_gpio))
> +		gpio_direction_output(parser->aux_sel_gpio, flip);
> +
> +	if (gpio_is_valid(parser->aux_en_gpio))
> +		gpio_direction_output(parser->aux_en_gpio, 0);
> +
> +	if (gpio_is_valid(parser->usbplug_cc_gpio))
> +		gpio_set_value(parser->usbplug_cc_gpio, 0);
> +}
> +
> +static int dp_power_config_gpios(struct dp_power_private *power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return rc;
> +
> +	rc = dp_power_request_gpios(power);
> +	if (rc) {
> +		DRM_ERROR("gpio request failed\n");
> +		return rc;
> +	}
> +
> +	dp_power_set_gpio(power, flip);
> +	return 0;
> +}
> +
> +static void dp_power_disable_gpios(struct dp_power_private *power)
> +{
> +	struct dp_parser *parser = power->parser;
> +
> +	if (!parser->combo_phy_en)
> +		return;
> +
> +	gpio_set_value(parser->aux_sel_gpio, 0);
> +	gpio_set_value(parser->aux_en_gpio, 0);
> +	gpio_set_value(parser->usbplug_cc_gpio, 0);
> +	gpio_free(parser->aux_sel_gpio);
> +	gpio_free(parser->aux_en_gpio);
> +	gpio_free(parser->usbplug_cc_gpio);
> +}
> +
> +int dp_power_client_init(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		return -EINVAL;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_enable(&power->pdev->dev);
> +
> +	rc = dp_power_regulator_init(power);
> +	if (rc) {
> +		DRM_ERROR("failed to init regulators %d\n", rc);
> +		goto error;
> +	}
> +
> +	rc = dp_power_clk_init(power);
> +	if (rc) {
> +		DRM_ERROR("failed to init clocks %d\n", rc);
> +		goto error;
> +	}
> +	return 0;
> +
> +error:
> +	pm_runtime_disable(&power->pdev->dev);
> +	return rc;
> +}
> +
> +void dp_power_client_deinit(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		return;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	dp_power_clk_deinit(power);
> +	pm_runtime_disable(&power->pdev->dev);
> +
> +}
> +
> +int dp_power_set_link_clk_parent(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +	u32 num;
> +	struct dss_clk *cfg;
> +	char *name = "ctrl_link_clk";
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	num = power->parser->mp[DP_CTRL_PM].num_clk;
> +	cfg = power->parser->mp[DP_CTRL_PM].clk_config;
> +
> +	while (num && strcmp(cfg->clk_name, name)) {
> +		num--;
> +		cfg++;
> +	}
> +
> +	if (num && power->link_provider) {
> +		power->link_clk_src = clk_get_parent(cfg->clk);
> +			if (power->link_clk_src) {
> +				clk_set_parent(power->link_clk_src, power->link_provider);
> +				DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> +						__clk_get_name(power->link_provider),
> +						__clk_get_name(power->link_clk_src));
> +			} else {
> +				DRM_ERROR("couldn't get parent for clk=%s\n", name);
> +				rc = -EINVAL;
> +			}
> +	} else {
> +		DRM_ERROR("%s clock could not be set parent\n", name);
> +		rc = -EINVAL;
> +	}
> +exit:
> +	return rc;
> +}
> +
> +int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	if (power->pixel_clk_rcg && power->pixel_provider) {
> +		rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
> +		if (rc) {
> +			DRM_ERROR("failed to set parent clk src, %d\n", rc);
> +			return rc;
> +		}
> +		DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> +					__clk_get_name(power->pixel_provider),
> +					__clk_get_name(power->pixel_clk_rcg));
> +	}
> +
> +	return 0;
> +}
> +
> +int dp_power_init(struct dp_power *dp_power, bool flip)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +
> +	if (!dp_power) {
> +		DRM_ERROR("invalid power data\n");
> +		rc = -EINVAL;
> +		goto exit;
> +	}
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	pm_runtime_get_sync(&power->pdev->dev);
> +	rc = dp_power_regulator_enable(power);
> +	if (rc) {
> +		DRM_ERROR("failed to enable regulators, %d\n", rc);
> +		goto exit;
> +	}
> +
> +	rc = dp_power_pinctrl_set(power, true);
> +	if (rc) {
> +		DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> +		goto err_pinctrl;
> +	}
> +
> +	rc = dp_power_config_gpios(power, flip);
> +	if (rc) {
> +		DRM_ERROR("failed to enable gpios, %d\n", rc);
> +		goto err_gpio;
> +	}
> +
> +	rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> +	if (rc) {
> +		DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> +		goto err_clk;
> +	}
> +
> +	return 0;
> +
> +err_clk:
> +	dp_power_disable_gpios(power);
> +err_gpio:
> +	dp_power_pinctrl_set(power, false);
> +err_pinctrl:
> +	dp_power_regulator_disable(power);
> +exit:
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return rc;
> +}
> +
> +int dp_power_deinit(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> +	dp_power_disable_gpios(power);
> +	dp_power_pinctrl_set(power, false);
> +	dp_power_regulator_disable(power);
> +	pm_runtime_put_sync(&power->pdev->dev);
> +	return 0;
> +}
> +
> +struct dp_power *dp_power_get(struct dp_parser *parser)
> +{
> +	int rc = 0;
> +	struct dp_power_private *power;
> +	struct dp_power *dp_power;
> +
> +	if (!parser) {
> +		DRM_ERROR("invalid input\n");
> +		rc = -EINVAL;
> +		goto error;
> +	}
> +
> +	power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
> +	if (!power) {
> +		rc = -ENOMEM;
> +		goto error;
> +	}
> +
> +	power->parser = parser;
> +	power->pdev = parser->pdev;
> +
> +	dp_power = &power->dp_power;
> +
> +	return dp_power;
> +error:
> +	return ERR_PTR(rc);
> +}
> +
> +void dp_power_put(struct dp_power *dp_power)
> +{
> +	struct dp_power_private *power = NULL;
> +
> +	if (!dp_power)
> +		return;
> +
> +	power = container_of(dp_power, struct dp_power_private, dp_power);
> +
> +	devm_kfree(&power->pdev->dev, power);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
> new file mode 100644
> index 0000000..40d7e73
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
> @@ -0,0 +1,52 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2012-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_POWER_H_
> +#define _DP_POWER_H_
> +
> +#include "dp_parser.h"
> +
> +/**
> + * sruct dp_power - DisplayPort's power related data
> + *
> + * @init: initializes the regulators/core clocks/GPIOs/pinctrl
> + * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
> + * @clk_enable: enable/disable the DP clocks
> + * @set_link_clk_parent: set the parent of DP link clock
> + * @set_pixel_clk_parent: set the parent of DP pixel clock
> + */
> +struct dp_power {
> +	bool core_clks_on;
> +	bool link_clks_on;
> +};
> +
> +int dp_power_init(struct dp_power *power, bool flip);
> +int dp_power_deinit(struct dp_power *power);
> +int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
> +				bool enable);
> +int dp_power_set_link_clk_parent(struct dp_power *power);
> +int dp_power_set_pixel_clk_parent(struct dp_power *power);
> +int dp_power_client_init(struct dp_power *power);
> +void dp_power_client_deinit(struct dp_power *power);
> +
> +/**
> + * dp_power_get() - configure and get the DisplayPort power module data
> + *
> + * @parser: instance of parser module
> + * return: pointer to allocated power module data
> + *
> + * This API will configure the DisplayPort's power module and provides
> + * methods to be called by the client to configure the power related
> + * modueles.
> + */
> +struct dp_power *dp_power_get(struct dp_parser *parser);
> +
> +/**
> + * dp_power_put() - release the power related resources
> + *
> + * @power: pointer to the power module's data
> + */
> +void dp_power_put(struct dp_power *power);
> +#endif /* _DP_POWER_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
> new file mode 100644
> index 0000000..5468f7b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
> @@ -0,0 +1,488 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DP_REG_H_
> +#define _DP_REG_H_
> +
> +/* DP_TX Registers */
> +#define REG_DP_HW_VERSION			(0x00000000)
> +
> +#define REG_DP_SW_RESET				(0x00000010)
> +#define DP_SW_RESET				(0x00000001)
> +
> +#define REG_DP_PHY_CTRL				(0x00000014)
> +#define DP_PHY_CTRL_SW_RESET_PLL		(0x00000001)
> +#define DP_PHY_CTRL_SW_RESET			(0x00000004)
> +
> +#define REG_DP_CLK_CTRL				(0x00000018)
> +#define REG_DP_CLK_ACTIVE			(0x0000001C)
> +#define REG_DP_INTR_STATUS			(0x00000020)
> +#define REG_DP_INTR_STATUS2			(0x00000024)
> +#define REG_DP_INTR_STATUS3			(0x00000028)
> +
> +#define REG_DP_DP_HPD_CTRL			(0x00000000)
> +#define DP_DP_HPD_CTRL_HPD_EN			(0x00000001)
> +
> +#define REG_DP_DP_HPD_INT_STATUS		(0x00000004)
> +
> +#define REG_DP_DP_HPD_INT_ACK			(0x00000008)
> +#define DP_DP_HPD_PLUG_INT_ACK			(0x00000001)
> +#define DP_DP_IRQ_HPD_INT_ACK			(0x00000002)
> +#define DP_DP_HPD_REPLUG_INT_ACK		(0x00000004)
> +#define DP_DP_HPD_UNPLUG_INT_ACK		(0x00000008)
> +
> +#define REG_DP_DP_HPD_INT_MASK			(0x0000000C)
> +#define DP_DP_HPD_PLUG_INT_MASK			(0x00000001)
> +#define DP_DP_IRQ_HPD_INT_MASK			(0x00000002)
> +#define DP_DP_HPD_REPLUG_INT_MASK		(0x00000004)
> +#define DP_DP_HPD_UNPLUG_INT_MASK		(0x00000008)
> +
> +#define REG_DP_DP_HPD_REFTIMER			(0x00000018)
> +#define REG_DP_DP_HPD_EVENT_TIME_0		(0x0000001C)
> +#define REG_DP_DP_HPD_EVENT_TIME_1		(0x00000020)
> +
> +#define REG_DP_AUX_CTRL				(0x00000030)
> +#define DP_AUX_CTRL_ENABLE			(0x00000001)
> +#define DP_AUX_CTRL_RESET			(0x00000002)
> +
> +#define REG_DP_AUX_DATA				(0x00000034)
> +#define DP_AUX_DATA_READ			(0x00000001)
> +#define DP_AUX_DATA_WRITE			(0x00000000)
> +#define DP_AUX_DATA_OFFSET			(0x00000008)
> +#define DP_AUX_DATA_INDEX_OFFSET		(0x00000010)
> +#define DP_AUX_DATA_MASK			(0x0000ff00)
> +#define DP_AUX_DATA_INDEX_WRITE			(0x80000000)
> +
> +#define REG_DP_AUX_TRANS_CTRL			(0x00000038)
> +#define DP_AUX_TRANS_CTRL_I2C			(0x00000100)
> +#define DP_AUX_TRANS_CTRL_GO			(0x00000200)
> +#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR		(0x00000400)
> +#define DP_AUX_TRANS_CTRL_NO_SEND_STOP		(0x00000800)
> +
> +#define REG_DP_TIMEOUT_COUNT			(0x0000003C)
> +#define REG_DP_AUX_LIMITS			(0x00000040)
> +#define REG_DP_AUX_STATUS			(0x00000044)
> +
> +#define DP_DPCD_CP_IRQ				(0x201)
> +#define DP_DPCD_RXSTATUS			(0x69493)
> +
> +#define DP_INTERRUPT_TRANS_NUM			(0x000000A0)
> +
> +#define REG_DP_MAINLINK_CTRL			(0x00000000)
> +#define DP_MAINLINK_CTRL_ENABLE			(0x00000001)
> +#define DP_MAINLINK_CTRL_RESET			(0x00000002)
> +#define DP_MAINLINK_FB_BOUNDARY_SEL		(0x02000000)
> +
> +#define REG_DP_STATE_CTRL			(0x00000004)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1	(0x00000001)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2	(0x00000002)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3	(0x00000004)
> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4	(0x00000008)
> +#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE	(0x00000010)
> +#define DP_STATE_CTRL_LINK_PRBS7		(0x00000020)
> +#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN	(0x00000040)
> +#define DP_STATE_CTRL_SEND_VIDEO		(0x00000080)
> +#define DP_STATE_CTRL_PUSH_IDLE 		(0x00000100)
> +
> +#define REG_DP_CONFIGURATION_CTRL		(0x00000008)
> +#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK	(0x00000001)
> +#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
> +#define DP_CONFIGURATION_CTRL_P_INTERLACED	(0x00000004)
> +#define DP_CONFIGURATION_CTRL_INTERLACED_BTF	(0x00000008)
> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES	(0x00000010)
> +#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING	(0x00000040)
> +#define DP_CONFIGURATION_CTRL_SEND_VSC		(0x00000080)
> +#define DP_CONFIGURATION_CTRL_BPC		(0x00000100)
> +#define DP_CONFIGURATION_CTRL_ASSR		(0x00000400)
> +#define DP_CONFIGURATION_CTRL_RGB_YUV		(0x00000800)
> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV		(0x00002000)
> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
> +#define DP_CONFIGURATION_CTRL_BPC_SHIFT 	      (0x08)
> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT	      (0x0D)
> +
> +#define REG_DP_SOFTWARE_MVID			(0x00000010)
> +#define REG_DP_SOFTWARE_NVID			(0x00000018)
> +#define REG_DP_TOTAL_HOR_VER			(0x0000001C)
> +#define REG_DP_START_HOR_VER_FROM_SYNC		(0x00000020)
> +#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY	(0x00000024)
> +#define REG_DP_ACTIVE_HOR_VER			(0x00000028)
> +
> +#define REG_DP_MISC1_MISC0			(0x0000002C)
> +#define DP_MISC0_SYNCHRONOUS_CLK		(0x00000001)
> +#define DP_MISC0_COLORIMETRY_CFG_SHIFT		(0x00000001)
> +#define DP_MISC0_TEST_BITS_DEPTH_SHIFT		(0x00000005)
> +
> +#define REG_DP_VALID_BOUNDARY			(0x00000030)
> +#define REG_DP_VALID_BOUNDARY_2			(0x00000034)
> +
> +#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING	(0x00000038)
> +#define LANE0_MAPPING_SHIFT			(0x00000000)
> +#define LANE1_MAPPING_SHIFT			(0x00000002)
> +#define LANE2_MAPPING_SHIFT			(0x00000004)
> +#define LANE3_MAPPING_SHIFT			(0x00000006)
> +
> +#define REG_DP_MAINLINK_READY			(0x00000040)
> +#define DP_MAINLINK_READY_FOR_VIDEO		(0x00000001)
> +#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT	(0x00000003)
> +
> +#define REG_DP_MAINLINK_LEVELS			(0x00000044)
> +#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2	(0x00000002)
> +
> +
> +#define REG_DP_TU				(0x0000004C)
> +
> +#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET	(0x00000054)
> +#define DP_HBR2_ERM_PATTERN			(0x00010000)
> +
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0	(0x000000C0)
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1	(0x000000C4)
> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2	(0x000000C8)
> +
> +#define MMSS_DP_MISC1_MISC0			(0x0000002C)
> +#define MMSS_DP_AUDIO_TIMING_GEN		(0x00000080)
> +#define MMSS_DP_AUDIO_TIMING_RBR_32		(0x00000084)
> +#define MMSS_DP_AUDIO_TIMING_HBR_32		(0x00000088)
> +#define MMSS_DP_AUDIO_TIMING_RBR_44		(0x0000008C)
> +#define MMSS_DP_AUDIO_TIMING_HBR_44		(0x00000090)
> +#define MMSS_DP_AUDIO_TIMING_RBR_48		(0x00000094)
> +#define MMSS_DP_AUDIO_TIMING_HBR_48		(0x00000098)
> +
> +#define MMSS_DP_PSR_CRC_RG			(0x00000154)
> +#define MMSS_DP_PSR_CRC_B			(0x00000158)
> +
> +#define REG_DP_COMPRESSION_MODE_CTRL		(0x00000180)
> +
> +#define MMSS_DP_AUDIO_CFG			(0x00000200)
> +#define MMSS_DP_AUDIO_STATUS			(0x00000204)
> +#define MMSS_DP_AUDIO_PKT_CTRL			(0x00000208)
> +#define MMSS_DP_AUDIO_PKT_CTRL2			(0x0000020C)
> +#define MMSS_DP_AUDIO_ACR_CTRL			(0x00000210)
> +#define MMSS_DP_AUDIO_CTRL_RESET		(0x00000214)
> +
> +#define MMSS_DP_SDP_CFG				(0x00000228)
> +#define MMSS_DP_SDP_CFG2			(0x0000022C)
> +#define MMSS_DP_AUDIO_TIMESTAMP_0		(0x00000230)
> +#define MMSS_DP_AUDIO_TIMESTAMP_1		(0x00000234)
> +
> +#define MMSS_DP_AUDIO_STREAM_0			(0x00000240)
> +#define MMSS_DP_AUDIO_STREAM_1			(0x00000244)
> +
> +#define MMSS_DP_EXTENSION_0			(0x00000250)
> +#define MMSS_DP_EXTENSION_1			(0x00000254)
> +#define MMSS_DP_EXTENSION_2			(0x00000258)
> +#define MMSS_DP_EXTENSION_3			(0x0000025C)
> +#define MMSS_DP_EXTENSION_4			(0x00000260)
> +#define MMSS_DP_EXTENSION_5			(0x00000264)
> +#define MMSS_DP_EXTENSION_6			(0x00000268)
> +#define MMSS_DP_EXTENSION_7			(0x0000026C)
> +#define MMSS_DP_EXTENSION_8			(0x00000270)
> +#define MMSS_DP_EXTENSION_9			(0x00000274)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_0		(0x00000278)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_1		(0x0000027C)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_2		(0x00000280)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_3		(0x00000284)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_4		(0x00000288)
> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_5		(0x0000028C)
> +#define MMSS_DP_AUDIO_ISRC_0			(0x00000290)
> +#define MMSS_DP_AUDIO_ISRC_1			(0x00000294)
> +#define MMSS_DP_AUDIO_ISRC_2			(0x00000298)
> +#define MMSS_DP_AUDIO_ISRC_3			(0x0000029C)
> +#define MMSS_DP_AUDIO_ISRC_4			(0x000002A0)
> +#define MMSS_DP_AUDIO_ISRC_5			(0x000002A4)
> +#define MMSS_DP_AUDIO_INFOFRAME_0		(0x000002A8)
> +#define MMSS_DP_AUDIO_INFOFRAME_1		(0x000002AC)
> +#define MMSS_DP_AUDIO_INFOFRAME_2		(0x000002B0)
> +
> +#define MMSS_DP_GENERIC0_0			(0x00000300)
> +#define MMSS_DP_GENERIC0_1			(0x00000304)
> +#define MMSS_DP_GENERIC0_2			(0x00000308)
> +#define MMSS_DP_GENERIC0_3			(0x0000030C)
> +#define MMSS_DP_GENERIC0_4			(0x00000310)
> +#define MMSS_DP_GENERIC0_5			(0x00000314)
> +#define MMSS_DP_GENERIC0_6			(0x00000318)
> +#define MMSS_DP_GENERIC0_7			(0x0000031C)
> +#define MMSS_DP_GENERIC0_8			(0x00000320)
> +#define MMSS_DP_GENERIC0_9			(0x00000324)
> +#define MMSS_DP_GENERIC1_0			(0x00000328)
> +#define MMSS_DP_GENERIC1_1			(0x0000032C)
> +#define MMSS_DP_GENERIC1_2			(0x00000330)
> +#define MMSS_DP_GENERIC1_3			(0x00000334)
> +#define MMSS_DP_GENERIC1_4			(0x00000338)
> +#define MMSS_DP_GENERIC1_5			(0x0000033C)
> +#define MMSS_DP_GENERIC1_6			(0x00000340)
> +#define MMSS_DP_GENERIC1_7			(0x00000344)
> +#define MMSS_DP_GENERIC1_8			(0x00000348)
> +#define MMSS_DP_GENERIC1_9			(0x0000034C)
> +
> +#define MMSS_DP_VSCEXT_0			(0x000002D0)
> +#define MMSS_DP_VSCEXT_1			(0x000002D4)
> +#define MMSS_DP_VSCEXT_2			(0x000002D8)
> +#define MMSS_DP_VSCEXT_3			(0x000002DC)
> +#define MMSS_DP_VSCEXT_4			(0x000002E0)
> +#define MMSS_DP_VSCEXT_5			(0x000002E4)
> +#define MMSS_DP_VSCEXT_6			(0x000002E8)
> +#define MMSS_DP_VSCEXT_7			(0x000002EC)
> +#define MMSS_DP_VSCEXT_8			(0x000002F0)
> +#define MMSS_DP_VSCEXT_9			(0x000002F4)
> +
> +#define MMSS_DP_BIST_ENABLE			(0x00000000)
> +#define DP_BIST_ENABLE_DPBIST_EN		(0x00000001)
> +
> +#define MMSS_DP_TIMING_ENGINE_EN		(0x00000010)
> +#define DP_TIMING_ENGINE_EN_EN			(0x00000001)
> +
> +#define MMSS_DP_INTF_CONFIG			(0x00000014)
> +#define MMSS_DP_INTF_HSYNC_CTL			(0x00000018)
> +#define MMSS_DP_INTF_VSYNC_PERIOD_F0		(0x0000001C)
> +#define MMSS_DP_INTF_VSYNC_PERIOD_F1		(0x00000020)
> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0	(0x00000024)
> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1	(0x00000028)
> +#define MMSS_INTF_DISPLAY_V_START_F0		(0x0000002C)
> +#define MMSS_INTF_DISPLAY_V_START_F1		(0x00000030)
> +#define MMSS_DP_INTF_DISPLAY_V_END_F0		(0x00000034)
> +#define MMSS_DP_INTF_DISPLAY_V_END_F1		(0x00000038)
> +#define MMSS_DP_INTF_ACTIVE_V_START_F0		(0x0000003C)
> +#define MMSS_DP_INTF_ACTIVE_V_START_F1		(0x00000040)
> +#define MMSS_DP_INTF_ACTIVE_V_END_F0		(0x00000044)
> +#define MMSS_DP_INTF_ACTIVE_V_END_F1		(0x00000048)
> +#define MMSS_DP_INTF_DISPLAY_HCTL		(0x0000004C)
> +#define MMSS_DP_INTF_ACTIVE_HCTL		(0x00000050)
> +#define MMSS_DP_INTF_POLARITY_CTL		(0x00000058)
> +
> +#define MMSS_DP_TPG_MAIN_CONTROL		(0x00000060)
> +#define DP_TPG_CHECKERED_RECT_PATTERN		(0x00000100)
> +
> +#define MMSS_DP_TPG_VIDEO_CONFIG		(0x00000064)
> +#define DP_TPG_VIDEO_CONFIG_BPP_8BIT		(0x00000001)
> +#define DP_TPG_VIDEO_CONFIG_RGB			(0x00000004)
> +
> +#define MMSS_DP_ASYNC_FIFO_CONFIG		(0x00000088)
> +
> +/*DP PHY Register offsets */
> +#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
> +#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
> +#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
> +#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
> +
> +#define REG_DP_PHY_CFG                          (0x00000010)
> +
> +#define REG_DP_PHY_PD_CTL                       (0x00000018)
> +#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
> +#define DP_PHY_PD_CTL_PSR_PWRDN			(0x00000002)
> +#define DP_PHY_PD_CTL_AUX_PWRDN			(0x00000004)
> +#define DP_PHY_PD_CTL_LANE_0_1_PWRDN		(0x00000008)
> +#define DP_PHY_PD_CTL_LANE_2_3_PWRDN		(0x00000010)
> +#define DP_PHY_PD_CTL_PLL_PWRDN			(0x00000020)
> +#define DP_PHY_PD_CTL_DP_CLAMP_EN		(0x00000040)
> +
> +#define REG_DP_PHY_MODE                         (0x0000001C)
> +
> +#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
> +#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
> +#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
> +#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
> +#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
> +#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
> +#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
> +#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
> +#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
> +#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
> +
> +#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
> +#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
> +#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
> +#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
> +#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
> +#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
> +
> +
> +#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
> +#define REG_DP_PHY_AUX_BIST_CFG			(0x00000050)
> +
> +#define REG_DP_PHY_VCO_DIV			0x0064
> +#define REG_DP_PHY_TX0_TX1_LANE_CTL		0x006C
> +#define REG_DP_PHY_TX2_TX3_LANE_CTL		0x0088
> +
> +#define REG_DP_PHY_SPARE0			(0x00AC)
> +#define DP_PHY_SPARE0_MASK			(0x000F)
> +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT	(0x0004);
> +
> +#define REG_DP_PHY_STATUS			(0x00C0)
> +
> +/* Tx registers */
> +#define REG_DP_PHY_TXn_BIST_MODE_LANENO		0x0000
> +#define REG_DP_PHY_TXn_CLKBUF_ENABLE		0x0008
> +
> +#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL		0x000C
> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK	0x001F
> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN	0x0020
> +
> +#define REG_DP_PHY_TXn_TX_DRV_LVL		0x001C
> +#define DP_PHY_TXn_TX_DRV_LVL_MASK		0x001F
> +#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN		0x0020
> +
> +#define REG_DP_PHY_TXn_RESET_TSYNC_EN		0x0024
> +#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN	0x0028
> +#define REG_DP_PHY_TXn_TX_BAND			0x002C
> +#define REG_DP_PHY_TXn_SLEW_CNTL		0x0030
> +#define REG_DP_PHY_TXn_INTERFACE_SELECT		0x0034
> +
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_TX		0x003C
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_RX		0x0040
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX	0x0044
> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX	0x0048
> +
> +#define REG_DP_PHY_TXn_DEBUG_BUS_SEL		0x0058
> +#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN	0x005C
> +#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN		0x0060
> +#define REG_DP_PHY_TXn_TX_POL_INV		0x0064
> +#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
> +
> +#define REG_DP_PHY_TXn_LANE_MODE_1		0x008C
> +
> +#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN		0x00C0
> +#define REG_DP_PHY_TXn_TX_INTERFACE_MODE	0x00C4
> +
> +#define REG_DP_PHY_TXn_VMODE_CTRL1		0x00F0
> +
> +/* PLL register offset */
> +#define QSERDES_COM_ATB_SEL1			0x0000
> +#define QSERDES_COM_ATB_SEL2			0x0004
> +#define QSERDES_COM_FREQ_UPDATE			0x0008
> +#define QSERDES_COM_BG_TIMER			0x000C
> +#define QSERDES_COM_SSC_EN_CENTER		0x0010
> +#define QSERDES_COM_SSC_ADJ_PER1		0x0014
> +#define QSERDES_COM_SSC_ADJ_PER2		0x0018
> +#define QSERDES_COM_SSC_PER1			0x001C
> +#define QSERDES_COM_SSC_PER2			0x0020
> +#define QSERDES_COM_SSC_STEP_SIZE1		0x0024
> +#define QSERDES_COM_SSC_STEP_SIZE2		0x0028
> +#define QSERDES_COM_POST_DIV			0x002C
> +#define QSERDES_COM_POST_DIV_MUX		0x0030
> +
> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		0x0034
> +#define QSERDES_COM_BIAS_EN			0x0001
> +#define QSERDES_COM_BIAS_EN_MUX			0x0002
> +#define QSERDES_COM_CLKBUF_R_EN			0x0004
> +#define QSERDES_COM_CLKBUF_L_EN			0x0008
> +#define QSERDES_COM_EN_SYSCLK_TX_SEL		0x0010
> +#define QSERDES_COM_CLKBUF_RX_DRIVE_L		0x0020
> +#define QSERDES_COM_CLKBUF_RX_DRIVE_R		0x0040
> +
> +#define QSERDES_COM_CLK_ENABLE1			0x0038
> +#define QSERDES_COM_SYS_CLK_CTRL		0x003C
> +#define QSERDES_COM_SYSCLK_BUF_ENABLE		0x0040
> +#define QSERDES_COM_PLL_EN			0x0044
> +#define QSERDES_COM_PLL_IVCO			0x0048
> +#define QSERDES_COM_CMN_IETRIM			0x004C
> +#define QSERDES_COM_CMN_IPTRIM			0x0050
> +
> +#define QSERDES_COM_CP_CTRL_MODE0		0x0060
> +#define QSERDES_COM_CP_CTRL_MODE1		0x0064
> +#define QSERDES_COM_PLL_RCTRL_MODE0		0x0068
> +#define QSERDES_COM_PLL_RCTRL_MODE1		0x006C
> +#define QSERDES_COM_PLL_CCTRL_MODE0		0x0070
> +#define QSERDES_COM_PLL_CCTRL_MODE1		0x0074
> +#define QSERDES_COM_PLL_CNTRL			0x0078
> +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM		0x007C
> +#define QSERDES_COM_SYSCLK_EN_SEL		0x0080
> +#define QSERDES_COM_CML_SYSCLK_SEL		0x0084
> +#define QSERDES_COM_RESETSM_CNTRL		0x0088
> +#define QSERDES_COM_RESETSM_CNTRL2		0x008C
> +#define QSERDES_COM_LOCK_CMP_EN			0x0090
> +#define QSERDES_COM_LOCK_CMP_CFG		0x0094
> +#define QSERDES_COM_LOCK_CMP1_MODE0		0x0098
> +#define QSERDES_COM_LOCK_CMP2_MODE0		0x009C
> +#define QSERDES_COM_LOCK_CMP3_MODE0		0x00A0
> +
> +#define QSERDES_COM_DEC_START_MODE0		0x00B0
> +#define QSERDES_COM_DEC_START_MODE1		0x00B4
> +#define QSERDES_COM_DIV_FRAC_START1_MODE0	0x00B8
> +#define QSERDES_COM_DIV_FRAC_START2_MODE0	0x00BC
> +#define QSERDES_COM_DIV_FRAC_START3_MODE0	0x00C0
> +#define QSERDES_COM_DIV_FRAC_START1_MODE1	0x00C4
> +#define QSERDES_COM_DIV_FRAC_START2_MODE1	0x00C8
> +#define QSERDES_COM_DIV_FRAC_START3_MODE1	0x00CC
> +#define QSERDES_COM_INTEGLOOP_INITVAL		0x00D0
> +#define QSERDES_COM_INTEGLOOP_EN		0x00D4
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	0x00D8
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	0x00DC
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	0x00E0
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	0x00E4
> +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL		0x00E8
> +#define QSERDES_COM_VCO_TUNE_CTRL		0x00EC
> +#define QSERDES_COM_VCO_TUNE_MAP		0x00F0
> +
> +#define QSERDES_COM_CMN_STATUS			0x0124
> +#define QSERDES_COM_RESET_SM_STATUS		0x0128
> +
> +#define QSERDES_COM_CLK_SEL			0x0138
> +#define QSERDES_COM_HSCLK_SEL			0x013C
> +
> +#define QSERDES_COM_CORECLK_DIV_MODE0		0x0148
> +
> +#define QSERDES_COM_SW_RESET			0x0150
> +#define QSERDES_COM_CORE_CLK_EN			0x0154
> +#define QSERDES_COM_C_READY_STATUS		0x0158
> +#define QSERDES_COM_CMN_CONFIG			0x015C
> +
> +#define QSERDES_COM_SVS_MODE_CLK_SEL		0x0164
> +
> +/* DP MMSS_CC registers */
> +#define MMSS_DP_LINK_CMD_RCGR			(0x0138)
> +#define MMSS_DP_LINK_CFG_RCGR			(0x013C)
> +#define MMSS_DP_PIXEL_M				(0x0174)
> +#define MMSS_DP_PIXEL_N				(0x0178)
> +
> +/* DP HDCP 1.3 registers */
> +#define DP_HDCP_CTRL                                   (0x0A0)
> +#define DP_HDCP_STATUS                                 (0x0A4)
> +#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
> +#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
> +#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
> +#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
> +#define DP_HDCP_SHA_STATUS                             (0x0C8)
> +#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
> +#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
> +#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
> +#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
> +#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
> +
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
> +
> +/* USB3 DP COM registers */
> +#define REG_USB3_DP_COM_RESET_OVRD_CTRL			(0x1C)
> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET		(0x01)
> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX	(0x02)
> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET		(0x04)
> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX	(0x08)
> +
> +#define REG_USB3_DP_COM_PHY_MODE_CTRL			(0x00)
> +#define USB3_DP_COM_PHY_MODE_DP				(0x02)
> +
> +#define REG_USB3_DP_COM_SW_RESET			(0x04)
> +#define USB3_DP_COM_SW_RESET_SET			(0x01)
> +
> +#define REG_USB3_DP_COM_TYPEC_CTRL			(0x10)
> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL			(0x01)
> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX		(0x02)
> +
> +#define REG_USB3_DP_COM_SWI_CTRL			(0x0c)
> +
> +#define REG_USB3_DP_COM_POWER_DOWN_CTRL			(0x08)
> +#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN		(0x01)
> +
> +
> +
> +#endif /* _DP_REG_H_ */
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index c84f0a8..e5e93e3 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
>  	msm_dsi_register();
>  	msm_edp_register();
>  	msm_hdmi_register();
> +	msm_dp_register();
>  	adreno_register();
>  	return platform_driver_register(&msm_platform_driver);
>  }
> @@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
>  {
>  	DBG("fini");
>  	platform_driver_unregister(&msm_platform_driver);
> +	msm_dp_unregister();
>  	msm_hdmi_unregister();
>  	adreno_unregister();
>  	msm_edp_unregister();
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 71547e7..8b068ec 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -159,6 +159,8 @@ struct msm_drm_private {
>  	/* DSI is shared by mdp4 and mdp5 */
>  	struct msm_dsi *dsi[2];
>  
> +	struct msm_dp *dp;
> +
>  	/* when we have more than one 'msm_gpu' these need to be an array: */
>  	struct msm_gpu *gpu;
>  	struct msm_file_private *lastctx;
> @@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
>  }
>  #endif
>  
> +#ifdef CONFIG_DRM_MSM_DP
> +int __init msm_dp_register(void);
> +void __exit msm_dp_unregister(void);
> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> +			 struct drm_encoder *encoder);
> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder);
> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder);
> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode);
> +
> +#else
> +static inline int __init msm_dp_register(void)
> +{
> +	return -EINVAL;
> +}
> +static inline void __exit msm_dp_unregister(void)
> +{
> +}
> +static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
> +				       struct drm_device *dev,
> +				       struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> +	return -EINVAL;
> +}
> +static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode)
> +{
> +}
> +#endif
> +
>  void __init msm_mdp_register(void);
>  void __exit msm_mdp_unregister(void);
>  void __init msm_dpu_register(void);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: FW: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[varar]

Hi Matthias

The earlier patchsets of the same series were reviewed by Sean so we 
were spending our efforts addressing the comments based on the earlier 
versions. We think the delay in getting reviews and also posting newer 
versions was not specifically due to the size of the code but also due 
to business reasons around that time. This is the basic version of the 
DP driver where all the files are tightly coupled. We understand that 
this is a big series and we have tried to break it up 
functionality-wise. For example, we are going to post hot-plug related 
changes and some more functionality like audio in a later patch. Also, 
we shall be posting a newer version of this series within a day or two 
which shall address the comments posted so far along with the checkpatch 
fixes and changes needed to make DP work on Trogdor. Hence we request 
that the new version which shall be posted be reviewed first and if 
there is some split-up which can be done further, let us know and we 
shall try to address that in the next patchsets.

Thanks

Vara (on behalf of Display team)

> -------- Original Message --------
> Subject: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver
> support
> Date: 2020-02-28 13:49
>  From: Matthias Kaehlcke <mka@chromium.org>
> To: Chandan Uddaraju <chandanu@codeaurora.org>
> Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
> abhinavk@codeaurora.org, seanpaul@chromium.org,
> dri-devel@lists.freedesktop.org, hoegsberg@google.com,
> freedreno@lists.freedesktop.org
> 
> Hi Chandan,
> 
> I have no DRM background, but I suspect one reason this patch hasn't
> been reviewed in almost 3 months is its size, 8k LOC. I would suggest 
> to
> split it up into multiple pieces to make a review less daunting. Not
> sure
> what the exact split would be, evaluating it per source file/self
> contained function could be a starting point.
> 
> And please make sure to run scripts/checkpatch.pl before sending 
> patches
> (especially larger ones), reviewers don't like to spend time pointing
> out
> formatting issues that should have been fixed beforehand:
> 
> ./scripts/checkpatch.pl
> DPU-v3-3-5-drm-msm-dp-add-displayPort-driver-support.patch
> 
> ...
> 
> total: 2 errors, 141 warnings, 8440 lines checked
> 
> Thanks
> 
> Matthias
> 
> On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
>> Add the needed displayPort files to enable DP driver
>> on msm target.
>> 
>> "dp_display" module is the main module that calls into
>> other sub-modules. "dp_drm" file represents the interface
>> between DRM framework and DP driver.
>> 
>> changes in v2:
>> -- Update copyright markings on all relevant files.
>> -- Change pr_err() to DRM_ERROR()
>> -- Use APIs directly instead of function pointers.
>> -- Use drm_display_mode structure to store link parameters in the
>> driver.
>> -- Use macros for register definitions instead of hardcoded values.
>> -- Replace writel_relaxed/readl_relaxed with writel/readl
>>    and remove memory barriers.
>> -- Remove unnecessary NULL checks.
>> -- Use drm helper functions for dpcd read/write.
>> -- Use DRM_DEBUG_DP for debug msgs.
>> 
>> changes in V3:
>> -- Removed changes in dpu_io_util.[ch]
>> -- Added locking around "is_connected" flag and removed atomic_set()
>> -- Removed the argument validation checks in all the static functions
>>    except initialization functions and few API calls across msm/dp
>> files
>> -- Removed hardcoded values for register reads/writes
>> -- Removed vreg related generic structures.
>> -- Added return values where ever necessary.
>> -- Updated dp_ctrl_on function.
>> -- Calling the ctrl specific catalog functions directly instead of
>>    function pointers.
>> -- Added seperate change that adds standard value in drm_dp_helper
>> file.
>> -- Added separate change in this list that is used to initialize
>>    displayport in DPU driver.
>> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>> 
>> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/Kconfig                 |    9 +
>>  drivers/gpu/drm/msm/Makefile                |   13 +
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
>>  drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
>>  drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
>>  drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
>>  drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590
>> +++++++++++++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
>>  drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
>>  drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
>>  drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
>>  drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
>>  drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
>>  drivers/gpu/drm/msm/dp/dp_link.c            | 1185
>> ++++++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
>>  drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
>>  drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
>>  drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
>>  drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
>>  drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
>>  drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
>>  drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
>>  drivers/gpu/drm/msm/msm_drv.c               |    2 +
>>  drivers/gpu/drm/msm/msm_drv.h               |   42 +
>>  26 files changed, 8366 insertions(+)
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h
>> 
>> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
>> index 6deaa7d..7946cb1 100644
>> --- a/drivers/gpu/drm/msm/Kconfig
>> +++ b/drivers/gpu/drm/msm/Kconfig
>> @@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
>>  help
>>    Choose this option to enable HDCP state machine
>> 
>> +config DRM_MSM_DP
>> +bool "Enable DP support in MSM DRM driver"
>> +depends on DRM_MSM
>> +default n
>> +help
>> +  Compile in support for DP driver in msm drm driver. DP external
>> +  display support is enabled through this config option. It can
>> +  be primary or secondary display on device.
>> +
>>  config DRM_MSM_DSI
>>  bool "Enable DSI support in MSM DRM driver"
>>  depends on DRM_MSM
>> diff --git a/drivers/gpu/drm/msm/Makefile
>> b/drivers/gpu/drm/msm/Makefile
>> index 1579cf0..5939f41 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -2,6 +2,7 @@
>>  ccflags-y := -I $(srctree)/$(src)
>>  ccflags-y += -I $(srctree)/$(src)/disp/dpu1
>>  ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
>> +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
>> 
>>  msm-y := \
>>  adreno/adreno_device.o \
>> @@ -96,8 +97,20 @@ msm-y := \
>> 
>>  msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
>> 
>> +
>>  msm-$(CONFIG_DRM_MSM_GPU_STATE)+= adreno/a6xx_gpu_state.o
>> 
>> +msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
>> +dp/dp_catalog.o \
>> +dp/dp_ctrl.o \
>> +dp/dp_display.o \
>> +dp/dp_drm.o \
>> +dp/dp_extcon.o \
>> +dp/dp_link.o \
>> +dp/dp_panel.o \
>> +dp/dp_parser.o \
>> +dp/dp_power.o
>> +
>>  msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
>>  msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
>>  msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index f96e142..29ac7d3 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct
>> drm_encoder *drm_enc,
>> 
>>  trace_dpu_enc_mode_set(DRMID(drm_enc));
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
>> +msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
>> +
>>  list_for_each_entry(conn_iter, connector_list, head)
>>  if (conn_iter->encoder == drm_enc)
>>  conn = conn_iter;
>> @@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>>  {
>>  struct dpu_encoder_virt *dpu_enc = NULL;
>>  int ret = 0;
>> +struct msm_drm_private *priv;
>>  struct drm_display_mode *cur_mode = NULL;
>> 
>>  if (!drm_enc) {
>> @@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>> 
>>  mutex_lock(&dpu_enc->enc_lock);
>>  cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
>> +priv = drm_enc->dev->dev_private;
>> 
>>  trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
>>       cur_mode->vdisplay);
>> @@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>> 
>>  _dpu_encoder_virt_enable_helper(drm_enc);
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
>> +ret = msm_dp_display_enable(priv->dp,
>> +drm_enc);
>> +if (ret) {
>> +DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
>> +ret);
>> +goto out;
>> +}
>> +}
>>  dpu_enc->enabled = true;
>> 
>>  out:
>> @@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct
>> drm_encoder *drm_enc)
>>  priv = drm_enc->dev->dev_private;
>>  dpu_kms = to_dpu_kms(priv->kms);
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
>> +if (msm_dp_display_disable(priv->dp, drm_enc)) {
>> +DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
>> +return;
>> +  }
>> +}
>>  trace_dpu_enc_disable(DRMID(drm_enc));
>> 
>>  /* wait for idle */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>> b/drivers/gpu/drm/msm/dp/dp_aux.c
>> new file mode 100644
>> index 0000000..a6bb52a
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -0,0 +1,548 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/delay.h>
>> +
>> +#include "dp_reg.h"
>> +#include "dp_aux.h"
>> +
>> +#define DP_AUX_ENUM_STR(x)#x
>> +
>> +struct dp_aux_private {
>> +struct device *dev;
>> +struct dp_aux dp_aux;
>> +struct dp_catalog *catalog;
>> +
>> +struct mutex mutex;
>> +struct completion comp;
>> +
>> +u32 aux_error_num;
>> +u32 retry_cnt;
>> +bool cmd_busy;
>> +bool native;
>> +bool read;
>> +bool no_send_addr;
>> +bool no_send_stop;
>> +u32 offset;
>> +u32 segment;
>> +u32 isr;
>> +
>> +struct drm_dp_aux drm_aux;
>> +};
>> +
>> +static char *dp_aux_get_error(u32 aux_error)
>> +{
>> +switch (aux_error) {
>> +case DP_AUX_ERR_NONE:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
>> +case DP_AUX_ERR_ADDR:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
>> +case DP_AUX_ERR_TOUT:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
>> +case DP_AUX_ERR_NACK:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
>> +case DP_AUX_ERR_DEFER:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
>> +case DP_AUX_ERR_NACK_DEFER:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +static u32 dp_aux_write(struct dp_aux_private *aux,
>> +struct drm_dp_aux_msg *msg)
>> +{
>> +u32 data[4], reg, len;
>> +u8 *msgdata = msg->buffer;
>> +int const aux_cmd_fifo_len = 128;
>> +int i = 0;
>> +
>> +if (aux->read)
>> +len = 4;
>> +else
>> +len = msg->size + 4;
>> +
>> +/*
>> + * cmd fifo only has depth of 144 bytes
>> + * limit buf length to 128 bytes here
>> + */
>> +if (len > aux_cmd_fifo_len) {
>> +DRM_ERROR("buf len error\n");
>> +return 0;
>> +}
>> +
>> +/* Pack cmd and write to HW */
>> +data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
>> +if (aux->read)
>> +data[0] |=  BIT(4); /* R/W */
>> +
>> +data[1] = (msg->address >> 8) & 0xff;/* addr[15:8] */
>> +data[2] = msg->address & 0xff;/* addr[7:0] */
>> +data[3] = (msg->size - 1) & 0xff;/* len[7:0] */
>> +
>> +for (i = 0; i < len; i++) {
>> +reg = (i < 4) ? data[i] : msgdata[i - 4];
>> +/* index = 0, write */
>> +reg = (((reg) << DP_AUX_DATA_OFFSET)
>> +       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
>> +if (i == 0)
>> +reg |= DP_AUX_DATA_INDEX_WRITE;
>> +aux->catalog->aux_data = reg;
>> +dp_catalog_aux_write_data(aux->catalog);
>> +}
>> +
>> +dp_catalog_aux_clear_trans(aux->catalog, false);
>> +
>> +reg = 0; /* Transaction number == 1 */
>> +if (!aux->native) { /* i2c */
>> +reg |= DP_AUX_TRANS_CTRL_I2C;
>> +
>> +if (aux->no_send_addr)
>> +reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
>> +
>> +if (aux->no_send_stop)
>> +reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
>> +}
>> +
>> +reg |= DP_AUX_TRANS_CTRL_GO;
>> +aux->catalog->aux_data = reg;
>> +dp_catalog_aux_write_trans(aux->catalog);
>> +
>> +return len;
>> +}
>> +
>> +static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>> +      struct drm_dp_aux_msg *msg)
>> +{
>> +u32 ret = 0, len = 0, timeout;
>> +int const aux_timeout_ms = HZ/4;
>> +
>> +reinit_completion(&aux->comp);
>> +
>> +len = dp_aux_write(aux, msg);
>> +if (len == 0) {
>> +DRM_ERROR("DP AUX write failed\n");
>> +return -EINVAL;
>> +}
>> +
>> +timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
>> +if (!timeout) {
>> +DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
>> +return -ETIMEDOUT;
>> +}
>> +
>> +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
>> +ret = len;
>> +} else {
>> +DRM_ERROR_RATELIMITED("aux err: %s\n",
>> +dp_aux_get_error(aux->aux_error_num));
>> +
>> +ret = -EINVAL;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
>> +struct drm_dp_aux_msg *msg)
>> +{
>> +u32 data;
>> +u8 *dp;
>> +u32 i, actual_i;
>> +u32 len = msg->size;
>> +
>> +dp_catalog_aux_clear_trans(aux->catalog, true);
>> +
>> +data = 0;
>> +data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
>> +data |= DP_AUX_DATA_READ;  /* read */
>> +
>> +aux->catalog->aux_data = data;
>> +dp_catalog_aux_write_data(aux->catalog);
>> +
>> +dp = msg->buffer;
>> +
>> +/* discard first byte */
>> +data = dp_catalog_aux_read_data(aux->catalog);
>> +
>> +for (i = 0; i < len; i++) {
>> +data = dp_catalog_aux_read_data(aux->catalog);
>> +*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
>> +
>> +actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
>> +if (i != actual_i)
>> +pr_warn("Index mismatch: expected %d, found %d\n",
>> +i, actual_i);
>> +}
>> +}
>> +
>> +static void dp_aux_native_handler(struct dp_aux_private *aux)
>> +{
>> +u32 isr = aux->isr;
>> +
>> +if (isr & DP_INTR_AUX_I2C_DONE)
>> +aux->aux_error_num = DP_AUX_ERR_NONE;
>> +else if (isr & DP_INTR_WRONG_ADDR)
>> +aux->aux_error_num = DP_AUX_ERR_ADDR;
>> +else if (isr & DP_INTR_TIMEOUT)
>> +aux->aux_error_num = DP_AUX_ERR_TOUT;
>> +if (isr & DP_INTR_NACK_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +
>> +complete(&aux->comp);
>> +}
>> +
>> +static void dp_aux_i2c_handler(struct dp_aux_private *aux)
>> +{
>> +u32 isr = aux->isr;
>> +
>> +if (isr & DP_INTR_AUX_I2C_DONE) {
>> +if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +else
>> +aux->aux_error_num = DP_AUX_ERR_NONE;
>> +} else {
>> +if (isr & DP_INTR_WRONG_ADDR)
>> +aux->aux_error_num = DP_AUX_ERR_ADDR;
>> +else if (isr & DP_INTR_TIMEOUT)
>> +aux->aux_error_num = DP_AUX_ERR_TOUT;
>> +if (isr & DP_INTR_NACK_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
>> +if (isr & DP_INTR_I2C_NACK)
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +if (isr & DP_INTR_I2C_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_DEFER;
>> +}
>> +
>> +complete(&aux->comp);
>> +}
>> +
>> +static void dp_aux_update_offset_and_segment(struct dp_aux_private
>> *aux,
>> +     struct drm_dp_aux_msg *input_msg)
>> +{
>> +u32 const edid_address = 0x50;
>> +u32 const segment_address = 0x30;
>> +bool i2c_read = input_msg->request &
>> +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +u8 *data = NULL;
>> +
>> +if (aux->native || i2c_read || ((input_msg->address != edid_address)
>> &&
>> +(input_msg->address != segment_address)))
>> +return;
>> +
>> +
>> +data = input_msg->buffer;
>> +if (input_msg->address == segment_address)
>> +aux->segment = *data;
>> +else
>> +aux->offset = *data;
>> +}
>> +
>> +/**
>> + * dp_aux_transfer_helper() - helper function for EDID read
>> transactions
>> + *
>> + * @aux: DP AUX private structure
>> + * @input_msg: input message from DRM upstream APIs
>> + *
>> + * return: void
>> + *
>> + * This helper function is used to fix EDID reads for non-compliant
>> + * sinks that do not handle the i2c middle-of-transaction flag
>> correctly.
>> + */
>> +static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>> +   struct drm_dp_aux_msg *input_msg)
>> +{
>> +struct drm_dp_aux_msg helper_msg;
>> +u32 const message_size = 0x10;
>> +u32 const segment_address = 0x30;
>> +bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
>> +bool i2c_read = input_msg->request &
>> +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +
>> +if (!i2c_mot || !i2c_read || (input_msg->size == 0))
>> +return;
>> +
>> +aux->read = false;
>> +aux->cmd_busy = true;
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = true;
>> +
>> +/*
>> + * Send the segment address for every i2c read in which the
>> + * middle-of-tranaction flag is set. This is required to support EDID
>> + * reads of more than 2 blocks as the segment address is reset to 0
>> + * since we are overriding the middle-of-transaction flag for read
>> + * transactions.
>> + */
>> +memset(&helper_msg, 0, sizeof(helper_msg));
>> +helper_msg.address = segment_address;
>> +helper_msg.buffer = &aux->segment;
>> +helper_msg.size = 1;
>> +dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +
>> +/*
>> + * Send the offset address for every i2c read in which the
>> + * middle-of-transaction flag is set. This will ensure that the sink
>> + * will update its read pointer and return the correct portion of the
>> + * EDID buffer in the subsequent i2c read trasntion triggered in the
>> + * native AUX transfer function.
>> + */
>> +memset(&helper_msg, 0, sizeof(helper_msg));
>> +helper_msg.address = input_msg->address;
>> +helper_msg.buffer = &aux->offset;
>> +helper_msg.size = 1;
>> +dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +aux->offset += message_size;
>> +
>> +if (aux->offset == 0x80 || aux->offset == 0x100)
>> +aux->segment = 0x0; /* reset segment at end of block */
>> +}
>> +
>> +/*
>> + * This function does the real job to process an AUX transaction.
>> + * It will call aux_reset() function to reset the AUX channel,
>> + * if the waiting is timeout.
>> + */
>> +static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
>> +       struct drm_dp_aux_msg *msg)
>> +{
>> +ssize_t ret;
>> +int const aux_cmd_native_max = 16;
>> +int const aux_cmd_i2c_max = 128;
>> +int const retry_count = 5;
>> +struct dp_aux_private *aux = container_of(drm_aux,
>> +struct dp_aux_private, drm_aux);
>> +
>> +mutex_lock(&aux->mutex);
>> +
>> +aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>> DP_AUX_NATIVE_READ);
>> +
>> +/* Ignore address only message */
>> +if ((msg->size == 0) || (msg->buffer == NULL)) {
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +ret = msg->size;
>> +goto unlock_exit;
>> +}
>> +
>> +/* msg sanity check */
>> +if ((aux->native && (msg->size > aux_cmd_native_max)) ||
>> +(msg->size > aux_cmd_i2c_max)) {
>> +DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>> +__func__, msg->size, msg->request);
>> +ret = -EINVAL;
>> +goto unlock_exit;
>> +}
>> +
>> +dp_aux_update_offset_and_segment(aux, msg);
>> +dp_aux_transfer_helper(aux, msg);
>> +
>> +aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +aux->cmd_busy = true;
>> +
>> +if (aux->read) {
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = false;
>> +} else {
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = true;
>> +}
>> +
>> +ret = dp_aux_cmd_fifo_tx(aux, msg);
>> +if ((ret < 0) && aux->native) {
>> +aux->retry_cnt++;
>> +if (!(aux->retry_cnt % retry_count))
>> +dp_catalog_aux_update_cfg(aux->catalog,
>> +aux->dp_aux.cfg, PHY_AUX_CFG1);
>> +dp_catalog_aux_reset(aux->catalog);
>> +goto unlock_exit;
>> +} else if (ret < 0) {
>> +goto unlock_exit;
>> +}
>> +
>> +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
>> +if (aux->read)
>> +dp_aux_cmd_fifo_rx(aux, msg);
>> +
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +} else {
>> +/* Reply defer to retry */
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
>> +}
>> +
>> +/* Return requested size for success or retry */
>> +ret = msg->size;
>> +aux->retry_cnt = 0;
>> +
>> +unlock_exit:
>> +aux->cmd_busy = false;
>> +mutex_unlock(&aux->mutex);
>> +return ret;
>> +}
>> +
>> +static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg
>> *aux_cfg)
>> +{
>> +int i = 0;
>> +
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++)
>> +aux_cfg[i].current_index = 0;
>> +}
>> +
>> +void dp_aux_isr(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +aux->isr = dp_catalog_aux_get_irq(aux->catalog);
>> +
>> +if (!aux->cmd_busy)
>> +return;
>> +
>> +if (aux->native)
>> +dp_aux_native_handler(aux);
>> +else
>> +dp_aux_i2c_handler(aux);
>> +}
>> +
>> +void dp_aux_reconfig(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_catalog_aux_update_cfg(aux->catalog,
>> +dp_aux->cfg, PHY_AUX_CFG1);
>> +dp_catalog_aux_reset(aux->catalog);
>> +}
>> +
>> +void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux || !aux_cfg) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_aux_reset_phy_config_indices(aux_cfg);
>> +dp_catalog_aux_setup(aux->catalog, aux_cfg);
>> +dp_catalog_aux_reset(aux->catalog);
>> +dp_catalog_aux_enable(aux->catalog, true);
>> +aux->retry_cnt = 0;
>> +}
>> +
>> +void dp_aux_deinit(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_catalog_aux_enable(aux->catalog, false);
>> +}
>> +
>> +int dp_aux_register(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +int ret = 0;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +aux->drm_aux.name = "dpu_dp_aux";
>> +aux->drm_aux.dev = aux->dev;
>> +aux->drm_aux.transfer = dp_aux_transfer;
>> +ret = drm_dp_aux_register(&aux->drm_aux);
>> +if (ret) {
>> +DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
>> +goto exit;
>> +}
>> +dp_aux->drm_aux = &aux->drm_aux;
>> +exit:
>> +return ret;
>> +}
>> +
>> +void dp_aux_unregister(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +drm_dp_aux_unregister(&aux->drm_aux);
>> +}
>> +
>> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
>> *catalog,
>> +  struct dp_aux_cfg *aux_cfg)
>> +{
>> +int rc = 0;
>> +struct dp_aux_private *aux;
>> +struct dp_aux *dp_aux;
>> +
>> +if (!catalog || !aux_cfg) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -ENODEV;
>> +goto error;
>> +}
>> +
>> +aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
>> +if (!aux) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +init_completion(&aux->comp);
>> +aux->cmd_busy = false;
>> +mutex_init(&aux->mutex);
>> +
>> +aux->dev = dev;
>> +aux->catalog = catalog;
>> +aux->dp_aux.cfg = aux_cfg;
>> +dp_aux = &aux->dp_aux;
>> +aux->retry_cnt = 0;
>> +
>> +return dp_aux;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_aux_put(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux)
>> +return;
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +mutex_destroy(&aux->mutex);
>> +
>> +devm_kfree(aux->dev, aux);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h
>> b/drivers/gpu/drm/msm/dp/dp_aux.h
>> new file mode 100644
>> index 0000000..8ce2221
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
>> @@ -0,0 +1,37 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_AUX_H_
>> +#define _DP_AUX_H_
>> +
>> +#include "dp_catalog.h"
>> +#include <drm/drm_dp_helper.h>
>> +
>> +enum dp_aux_error {
>> +DP_AUX_ERR_NONE= 0,
>> +DP_AUX_ERR_ADDR= -1,
>> +DP_AUX_ERR_TOUT= -2,
>> +DP_AUX_ERR_NACK= -3,
>> +DP_AUX_ERR_DEFER= -4,
>> +DP_AUX_ERR_NACK_DEFER= -5,
>> +};
>> +
>> +struct dp_aux {
>> +struct drm_dp_aux *drm_aux;
>> +struct dp_aux_cfg *cfg;
>> +};
>> +
>> +int dp_aux_register(struct dp_aux *aux);
>> +void dp_aux_unregister(struct dp_aux *aux);
>> +void dp_aux_isr(struct dp_aux *aux);
>> +void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
>> +void dp_aux_deinit(struct dp_aux *aux);
>> +void dp_aux_reconfig(struct dp_aux *aux);
>> +
>> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
>> *catalog,
>> +  struct dp_aux_cfg *aux_cfg);
>> +void dp_aux_put(struct dp_aux *aux);
>> +
>> +#endif /*__DP_AUX_H_*/
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> new file mode 100644
>> index 0000000..51e21bb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> @@ -0,0 +1,841 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/delay.h>
>> +#include <linux/iopoll.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include "dp_catalog.h"
>> +#include "dp_reg.h"
>> +
>> +#define POLLING_SLEEP_US1000
>> +#define POLLING_TIMEOUT_US10000
>> +
>> +#define REFTIMER_DEFAULT_VALUE0x20000
>> +#define SCRAMBLER_RESET_COUNT_VALUE0xFC
>> +
>> +#define DP_INTERRUPT_STATUS_ACK_SHIFT1
>> +#define DP_INTERRUPT_STATUS_MASK_SHIFT2
>> +
>> +#define DP_INTERRUPT_STATUS1 \
>> +(DP_INTR_AUX_I2C_DONE| \
>> +DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
>> +DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
>> +DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
>> +DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
>> +
>> +#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT)
>> +#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 <<
>> DP_INTERRUPT_STATUS_MASK_SHIFT)
>> +
>> +#define DP_INTERRUPT_STATUS2 \
>> +(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
>> +DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
>> +
>> +#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT)
>> +#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 <<
>> DP_INTERRUPT_STATUS_MASK_SHIFT)
>> +
>> +static u8 const vm_pre_emphasis[4][4] = {
>> +{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
>> +{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
>> +{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
>> +{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
>> +};
>> +
>> +/* voltage swing, 0.2v and 1.0v are not support */
>> +static u8 const vm_voltage_swing[4][4] = {
>> +{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
>> +{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
>> +{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
>> +{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
>> +};
>> +
>> +struct dp_catalog_private {
>> +struct device *dev;
>> +struct dp_io *io;
>> +struct dp_catalog dp_catalog;
>> +};
>> +
>> +static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_aux.base + offset);
>> +}
>> +
>> +static inline void dp_write_aux(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure aux reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_aux.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_ahb.base + offset);
>> +}
>> +
>> +static inline void dp_write_ahb(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure phy reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_ahb.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_cc_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_phy(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure phy reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->phy_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_pll(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_ln_tx0(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_ln_tx1(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_usb_cm(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure usb reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->usb3_dp_com.base + offset);
>> +}
>> +
>> +static inline void dp_write_p0(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure interface reg writes happens before any other
>> operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_p0.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_link(struct dp_catalog_private *catalog, 
>> u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_link.base + offset);
>> +}
>> +
>> +static inline void dp_write_link(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure link reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_link.base + offset);
>> +}
>> +
>> +/* aux related catalog functions */
>> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +return dp_read_aux(catalog, REG_DP_AUX_DATA);
>> +}
>> +
>> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
>> +{
>> +int rc = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
>> +return rc;
>> +}
>> +
>> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
>> +{
>> +int rc = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
>> +return rc;
>> +}
>> +
>> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
>> read)
>> +{
>> +int rc = 0;
>> +u32 data = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (read) {
>> +data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
>> +data &= ~DP_AUX_TRANS_CTRL_GO;
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
>> +} else {
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
>> +}
>> +return rc;
>> +}
>> +
>> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
>> +{
>> +u32 aux_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
>> +
>> +aux_ctrl |= DP_AUX_CTRL_RESET;
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +
>> +aux_ctrl &= ~DP_AUX_CTRL_RESET;
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +}
>> +
>> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool 
>> enable)
>> +{
>> +u32 aux_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
>> +
>> +if (enable) {
>> +dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
>> +dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
>> +aux_ctrl |= DP_AUX_CTRL_ENABLE;
>> +} else {
>> +aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
>> +}
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +}
>> +
>> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 new_index = 0, current_index = 0;
>> +
>> +if (type >= PHY_AUX_CFG_MAX) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +current_index = cfg[type].current_index;
>> +new_index = (current_index + 1) % cfg[type].cfg_cnt;
>> +DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
>> +dp_phy_aux_config_type_to_string(type),
>> +cfg[type].lut[current_index], cfg[type].lut[new_index]);
>> +
>> +dp_write_phy(catalog, cfg[type].offset,
>> +cfg[type].lut[new_index]);
>> +cfg[type].current_index = new_index;
>> +}
>> +
>> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +int i = 0;
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
>> +DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
>> +DP_PHY_PD_CTL_DP_CLAMP_EN);
>> +
>> +/* Turn on BIAS current for PHY/PLL */
>> +dp_write_pll(catalog,
>> +QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
>> +QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
>> +QSERDES_COM_EN_SYSCLK_TX_SEL);
>> +
>> +/* DP AUX CFG register programming */
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
>> +dp_phy_aux_config_type_to_string(i),
>> +cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
>> +dp_write_phy(catalog, cfg[i].offset,
>> +cfg[i].lut[cfg[i].current_index]);
>> +}
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK,
>> PHY_AUX_STOP_ERR_MASK |
>> +PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
>> +PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
>> +}
>> +
>> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 intr, intr_ack;
>> +
>> +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
>> +intr &= ~DP_INTERRUPT_STATUS1_MASK;
>> +intr_ack = (intr & DP_INTERRUPT_STATUS1) <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT;
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack |
>> DP_INTERRUPT_STATUS1_MASK);
>> +
>> +return intr;
>> +
>> +}
>> +
>> +/* controller related catalog functions */
>> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
>> *dp_catalog,
>> +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
>> +dp_write_link(catalog, REG_DP_TU, dp_tu);
>> +dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
>> +}
>> +
>> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, state);
>> +}
>> +
>> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
>> cfg)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
>> +
>> +dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
>> +}
>> +
>> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
>> +u32 ln_mapping;
>> +
>> +ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
>> +ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
>> +ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
>> +ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
>> +
>> +dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING,
>> ln_mapping);
>> +}
>> +
>> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
>> +bool enable)
>> +{
>> +u32 mainlink_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (enable) {
>> +/*
>> +* To make sure link reg writes happens before any other operation,
>> +* dp_write_link() function uses writel() instread of
>> writel_relaxed()
>> +*/
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> DP_MAINLINK_FB_BOUNDARY_SEL);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> DP_MAINLINK_FB_BOUNDARY_SEL);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
>> +} else {
>> +mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
>> +mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
>> +}
>> +}
>> +
>> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
>> +u32 colorimetry_cfg, u32 test_bits_depth)
>> +{
>> +u32 misc_val;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
>> +misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
>> +misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
>> +/* Configure clock to synchronous mode */
>> +misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
>> +
>> +DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
>> +dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
>> +}
>> +
>> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
>> +u32 rate, u32 stream_rate_khz,
>> +bool fixed_nvid)
>> +{
>> +u32 pixel_m, pixel_n;
>> +u32 mvid, nvid;
>> +u64 mvid_calc;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (fixed_nvid) {
>> +nvid = DP_LINK_CONSTANT_N_VALUE;
>> +DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
>> +
>> +/*
>> + * For intermediate results, use 64 bit arithmetic to avoid
>> + * loss of precision.
>> + */
>> +mvid_calc = (u64) stream_rate_khz * nvid;
>> +mvid_calc = div_u64(mvid_calc, rate);
>> +
>> +/*
>> + * truncate back to 32 bits as this final divided value will
>> + * always be within the range of a 32 bit unsigned int.
>> + */
>> +mvid = (u32) mvid_calc;
>> +DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
>> +rate, stream_rate_khz);
>> +} else {
>> +pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
>> +pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
>> +DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
>> +
>> +mvid = (pixel_m & 0xFFFF) * 5;
>> +nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
>> +
>> +DRM_DEBUG_DP("rate = %d\n", rate);
>> +
>> +switch (drm_dp_link_rate_to_bw_code(rate)) {
>> +case DP_LINK_BW_5_4:
>> +nvid *= 2;
>> +break;
>> +case DP_LINK_BW_8_1:
>> +nvid *= 3;
>> +break;
>> +default:
>> +break;
>> +}
>> +}
>> +
>> +DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
>> +dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
>> +dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
>> +}
>> +
>> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern)
>> +{
>> +int bit, ret;
>> +u32 data;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +bit = BIT(pattern - 1);
>> +DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
>> +
>> +bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
>> +
>> +/* Poll for mainlink ready status */
>> +ret = readx_poll_timeout(readl, catalog->io->dp_link.base +
>> REG_DP_MAINLINK_READY,
>> + data, data & bit,
>> + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
>> +if (ret < 0) {
>> +DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
>> +return ret;
>> +}
>> +return 0;
>> +}
>> +
>> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
>> flip)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 typec_ctrl;
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
>> +USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
>> +USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
>> +USB3_DP_COM_PHY_MODE_DP);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
>> +USB3_DP_COM_SW_RESET_SET);
>> +
>> +/* Default configuration i.e CC1 */
>> +typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
>> +if (flip)
>> +typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
>> +USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
>> +
>> +}
>> +
>> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
>> +{
>> +u32 sw_reset;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +void __iomem *base;
>> +
>> +base = catalog->io->dp_ahb.base;
>> +
>> +sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
>> +
>> +sw_reset |= DP_SW_RESET;
>> +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +
>> +sw_reset &= ~DP_SW_RESET;
>> +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
>> +}
>> +
>> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
>> +{
>> +u32 data;
>> +int ret;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +/* Poll for mainlink ready status */
>> +ret = readx_poll_timeout(readl,
>> + catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
>> + data, data & DP_MAINLINK_READY_FOR_VIDEO,
>> + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
>> +if (ret < 0) {
>> +DRM_ERROR("mainlink not ready\n");
>> +return false;
>> +}
>> +
>> +return true;
>> +}
>> +
>> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
>> +bool enable)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +void __iomem *base;
>> +
>> +base = catalog->io->dp_ahb.base;
>> +
>> +if (enable) {
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS,
>> DP_INTERRUPT_STATUS1_MASK);
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2,
>> DP_INTERRUPT_STATUS2_MASK);
>> +} else {
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
>> +}
>> +}
>> +
>> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
>> en)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (en) {
>> +u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
>> +
>> +dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
>> +DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
>> +DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
>> +dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
>> +DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
>> +DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
>> +
>> +/* Configure REFTIMER */
>> +reftimer |= REFTIMER_DEFAULT_VALUE;
>> +dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
>> +/* Enable HPD */
>> +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
>> +} else {
>> +/* Disable HPD */
>> +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
>> +}
>> +}
>> +
>> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 intr, intr_ack;
>> +
>> +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
>> +intr &= ~DP_INTERRUPT_STATUS2_MASK;
>> +intr_ack = (intr & DP_INTERRUPT_STATUS2) <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT;
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack |
>> DP_INTERRUPT_STATUS2_MASK);
>> +
>> +return intr;
>> +}
>> +
>> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_ahb(catalog, REG_DP_PHY_CTRL,
>> +DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
>> +}
>> +
>> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
>> +bool flipped, u8 ln_cnt)
>> +{
>> +u32 info;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u8 orientation = BIT(!!flipped);
>> +
>> +info = ln_cnt & DP_PHY_SPARE0_MASK;
>> +info |= (orientation & DP_PHY_SPARE0_MASK) <<
>> DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
>> +DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
>> +}
>> +
>> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
>> +u8 v_level, u8 p_level)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u8 voltage_swing_cfg, pre_emphasis_cfg;
>> +
>> +DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
>> +
>> +voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
>> +pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
>> +
>> +if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
>> +DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
>> +v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
>> +return -EINVAL;
>> +}
>> +
>> +/* Enable MUX to use Cursor values from these registers */
>> +voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
>> +pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
>> +
>> +/* Configure host and panel only if both values are allowed */
>> +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
>> voltage_swing_cfg);
>> +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
>> voltage_swing_cfg);
>> +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
>> pre_emphasis_cfg);
>> +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
>> pre_emphasis_cfg);
>> +DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
>> +voltage_swing_cfg, pre_emphasis_cfg);
>> +
>> +return 0;
>> +}
>> +
>> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 value = 0x0;
>> +
>> +/* Make sure to clear the current pattern before starting a new one
>> */
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
>> +
>> +switch (pattern) {
>> +case DP_LINK_QUAL_PATTERN_D10_2:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_PRBS7:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
>> +/* 00111110000011111000001111100000 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0,
>> 0x3E0F83E0);
>> +/* 00001111100000111110000011111000 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1,
>> 0x0F83E0F8);
>> +/* 1111100000111110 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2,
>> 0x0000F83E);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
>> +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
>> +value &= ~DP_HBR2_ERM_PATTERN;
>> +if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
>> +value = DP_HBR2_ERM_PATTERN;
>> +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
>> value);
>> +value |= SCRAMBLER_RESET_COUNT_VALUE;
>> +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
>> value);
>> +dp_write_link(catalog, REG_DP_MAINLINK_LEVELS,
>> DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
>> +return;
>> +default:
>> +DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
>> +return;
>> +}
>> +}
>> +
>> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +return dp_read_link(catalog, REG_DP_MAINLINK_READY);
>> +}
>> +
>> +/* panel related catalog functions */
>> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
>> +dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC,
>> dp_catalog->sync_start);
>> +dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY,
>> dp_catalog->width_blanking);
>> +dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
>> +return 0;
>> +}
>> +
>> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
>> +struct drm_display_mode *drm_mode)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 hsync_period, vsync_period;
>> +u32 display_v_start, display_v_end;
>> +u32 hsync_start_x, hsync_end_x;
>> +u32 v_sync_width;
>> +u32 hsync_ctl;
>> +u32 display_hctl;
>> +
>> +/* TPG config parameters*/
>> +hsync_period = drm_mode->htotal;
>> +vsync_period = drm_mode->vtotal;
>> +
>> +display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
>> +hsync_period);
>> +display_v_end = ((vsync_period - drm_mode->vsync_start -
>> +drm_mode->vdisplay) * hsync_period) - 1;
>> +
>> +display_v_start += drm_mode->htotal - drm_mode->hsync_start;
>> +display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
>> +
>> +hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
>> +hsync_end_x = hsync_period - drm_mode->hsync_start -
>> +drm_mode->hdisplay - 1;
>> +
>> +v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
>> +
>> +hsync_ctl = (hsync_period << 16) |
>> +(drm_mode->hsync_end - drm_mode->hsync_start);
>> +display_hctl = (hsync_end_x << 16) | hsync_start_x;
>> +
>> +
>> +dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
>> +hsync_period);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width
>> *
>> +hsync_period);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
>> +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
>> +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
>> +
>> +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL,
>> DP_TPG_CHECKERED_RECT_PATTERN);
>> +dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
>> +DP_TPG_VIDEO_CONFIG_BPP_8BIT |
>> +DP_TPG_VIDEO_CONFIG_RGB);
>> +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
>> +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN,
>> DP_TIMING_ENGINE_EN_EN);
>> +DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
>> +}
>> +
>> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
>> +return;
>> +}
>> +
>> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
>> *io)
>> +{
>> +int rc = 0;
>> +struct dp_catalog *dp_catalog;
>> +struct dp_catalog_private *catalog;
>> +
>> +if (!io) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
>> +if (!catalog) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +catalog->dev = dev;
>> +catalog->io = io;
>> +
>> +dp_catalog = &catalog->dp_catalog;
>> +
>> +return dp_catalog;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_catalog_put(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog;
>> +
>> +if (!dp_catalog)
>> +return;
>> +
>> +catalog = container_of(dp_catalog, struct dp_catalog_private,
>> +dp_catalog);
>> +
>> +devm_kfree(catalog->dev, catalog);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> new file mode 100644
>> index 0000000..51c82dd
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> @@ -0,0 +1,84 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_CATALOG_H_
>> +#define _DP_CATALOG_H_
>> +
>> +#include "dp_parser.h"
>> +
>> +/* interrupts */
>> +#define DP_INTR_HPDBIT(0)
>> +#define DP_INTR_AUX_I2C_DONEBIT(3)
>> +#define DP_INTR_WRONG_ADDRBIT(6)
>> +#define DP_INTR_TIMEOUTBIT(9)
>> +#define DP_INTR_NACK_DEFERBIT(12)
>> +#define DP_INTR_WRONG_DATA_CNTBIT(15)
>> +#define DP_INTR_I2C_NACKBIT(18)
>> +#define DP_INTR_I2C_DEFERBIT(21)
>> +#define DP_INTR_PLL_UNLOCKEDBIT(24)
>> +#define DP_INTR_AUX_ERRORBIT(27)
>> +
>> +#define DP_INTR_READY_FOR_VIDEOBIT(0)
>> +#define DP_INTR_IDLE_PATTERN_SENTBIT(3)
>> +#define DP_INTR_FRAME_ENDBIT(6)
>> +#define DP_INTR_CRC_UPDATEDBIT(9)
>> +
>> +struct dp_catalog {
>> +u32 aux_data;
>> +u32 total;
>> +u32 sync_start;
>> +u32 width_blanking;
>> +u32 dp_active;
>> +};
>> +
>> +/* AUX APIs */
>> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
>> read);
>> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
>> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *aux_cfg);
>> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>> +
>> +/* DP Controller APIs */
>> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state);
>> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
>> config);
>> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, 
>> bool
>> enable);
>> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32
>> cc, u32 tb);
>> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32
>> rate,
>> +u32 stream_rate_khz, bool fixed_nvid);
>> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32
>> pattern);
>> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
>> flip);
>> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool
>> flipped,
>> +u8 lane_cnt);
>> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8
>> v_level,
>> +u8 p_level);
>> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
>> *dp_catalog,
>> +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
>> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern);
>> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
>> +
>> +/* DP Panel APIs */
>> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
>> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
>> +struct drm_display_mode *drm_mode);
>> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
>> +
>> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
>> *io);
>> +void dp_catalog_put(struct dp_catalog *catalog);
>> +
>> +#endif /* _DP_CATALOG_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> new file mode 100644
>> index 0000000..a4575ea
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> @@ -0,0 +1,1590 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/types.h>
>> +#include <linux/completion.h>
>> +#include <linux/delay.h>
>> +#include <drm/drm_fixed.h>
>> +
>> +#include "dp_reg.h"
>> +#include "dp_ctrl.h"
>> +
>> +#define DP_KHZ_TO_HZ 1000
>> +#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES(30 * HZ / 1000) /* 30
>> ms */
>> +#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
>> +
>> +#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
>> +#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
>> +
>> +#define MR_LINK_TRAINING1  0x8
>> +#define MR_LINK_SYMBOL_ERM 0x80
>> +#define MR_LINK_PRBS7 0x100
>> +#define MR_LINK_CUSTOM80 0x200
>> +
>> +struct dp_tu_calc_input {
>> +u64 lclk;        /* 162, 270, 540 and 810 */
>> +u64 pclk_khz;    /* in KHz */
>> +u64 hactive;     /* active h-width */
>> +u64 hporch;      /* bp + fp + pulse */
>> +int nlanes;      /* no.of.lanes */
>> +int bpp;         /* bits */
>> +int pixel_enc;   /* 444, 420, 422 */
>> +int dsc_en;     /* dsc on/off */
>> +int async_en;   /* async mode */
>> +};
>> +
>> +struct dp_vc_tu_mapping_table {
>> +u8 valid_boundary_link;
>> +u16 delay_start_link;
>> +bool boundary_moderation_en;
>> +u8 valid_lower_boundary_link;
>> +u8 upper_boundary_count;
>> +u8 lower_boundary_count;
>> +u8 tu_size_minus1;
>> +};
>> +
>> +struct dp_ctrl_private {
>> +struct dp_ctrl dp_ctrl;
>> +
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_panel *panel;
>> +struct dp_link *link;
>> +struct dp_power *power;
>> +struct dp_parser *parser;
>> +struct dp_catalog *catalog;
>> +
>> +struct completion idle_comp;
>> +struct mutex push_idle_mutex;
>> +struct completion video_comp;
>> +};
>> +
>> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +mutex_lock(&ctrl->push_idle_mutex);
>> +
>> +reinit_completion(&ctrl->idle_comp);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
>> +
>> +if (!wait_for_completion_timeout(&ctrl->idle_comp,
>> +IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
>> +pr_warn("PUSH_IDLE pattern timedout\n");
>> +
>> +mutex_unlock(&ctrl->push_idle_mutex);
>> +pr_debug("mainlink off done\n");
>> +}
>> +
>> +static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
>> +{
>> +u32 config = 0, tbd;
>> +u8 *dpcd = ctrl->panel->dpcd;
>> +
>> +/* Default-> LSCLK DIV: 1/4 LCLK  */
>> +config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
>> +
>> +/* Scrambler reset enable */
>> +if (dpcd[DP_EDP_CONFIGURATION_CAP] &
>> DP_ALTERNATE_SCRAMBLER_RESET_CAP)
>> +config |= DP_CONFIGURATION_CTRL_ASSR;
>> +
>> +tbd = dp_link_get_test_bits_depth(ctrl->link,
>> +ctrl->panel->dp_mode.bpp);
>> +
>> +if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
>> +pr_debug("BIT_DEPTH not set. Configure default\n");
>> +tbd = DP_TEST_BIT_DEPTH_8;
>> +}
>> +
>> +config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
>> +
>> +/* Num of Lanes */
>> +config |= ((ctrl->link->link_params.num_lanes - 1)
>> +<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
>> +
>> +if (drm_dp_enhanced_frame_cap(dpcd))
>> +config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
>> +
>> +config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
>> +
>> +/* sync clock & static Mvid */
>> +config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
>> +config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
>> +
>> +dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
>> +}
>> +
>> +/**
>> + * dp_ctrl_configure_source_params() - configures DP transmitter
>> source params
>> + * @ctrl: Display Port Driver data
>> + *
>> + * Configures the DP transmitter source params including details such
>> as lane
>> + * configuration, output format and sink/panel timing information.
>> + */
>> +static void dp_ctrl_configure_source_params(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +u32 cc, tb;
>> +
>> +dp_catalog_ctrl_lane_mapping(ctrl->catalog);
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
>> +
>> +dp_ctrl_config_ctrl(ctrl);
>> +
>> +tb = dp_link_get_test_bits_depth(ctrl->link,
>> +ctrl->panel->dp_mode.bpp);
>> +cc = dp_link_get_colorimetry_config(ctrl->link);
>> +dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
>> +dp_panel_timing_cfg(ctrl->panel);
>> +}
>> +
>> +/*
>> + * The structure and few functions present below are IP/Hardware
>> + * specific implementation. Most of the implementation will not
>> + * have coding comments
>> + */
>> +struct tu_algo_data {
>> +s64 lclk_fp;
>> +s64 pclk_fp;
>> +s64 lwidth;
>> +s64 hbp_relative_to_pclk;
>> +int nlanes;
>> +int bpp;
>> +int pixelEnc;
>> +int dsc_en;
>> +int async_en;
>> +int bpc;
>> +
>> +uint delay_start_link_extra_pixclk;
>> +int extra_buffer_margin;
>> +s64 ratio_fp;
>> +s64 original_ratio_fp;
>> +
>> +s64 err_fp;
>> +s64 n_err_fp;
>> +s64 n_n_err_fp;
>> +int tu_size;
>> +int tu_size_desired;
>> +int tu_size_minus1;
>> +
>> +int valid_boundary_link;
>> +s64 resulting_valid_fp;
>> +s64 total_valid_fp;
>> +s64 effective_valid_fp;
>> +s64 effective_valid_recorded_fp;
>> +int n_tus;
>> +int n_tus_per_lane;
>> +int paired_tus;
>> +int remainder_tus;
>> +int remainder_tus_upper;
>> +int remainder_tus_lower;
>> +int extra_bytes;
>> +int filler_size;
>> +int delay_start_link;
>> +
>> +int extra_pclk_cycles;
>> +int extra_pclk_cycles_in_link_clk;
>> +s64 ratio_by_tu_fp;
>> +s64 average_valid2_fp;
>> +int new_valid_boundary_link;
>> +int remainder_symbols_exist;
>> +int n_symbols;
>> +s64 n_remainder_symbols_per_lane_fp;
>> +s64 last_partial_tu_fp;
>> +s64 TU_ratio_err_fp;
>> +
>> +int n_tus_incl_last_incomplete_tu;
>> +int extra_pclk_cycles_tmp;
>> +int extra_pclk_cycles_in_link_clk_tmp;
>> +int extra_required_bytes_new_tmp;
>> +int filler_size_tmp;
>> +int lower_filler_size_tmp;
>> +int delay_start_link_tmp;
>> +
>> +bool boundary_moderation_en;
>> +int boundary_mod_lower_err;
>> +int upper_boundary_count;
>> +int lower_boundary_count;
>> +int i_upper_boundary_count;
>> +int i_lower_boundary_count;
>> +int valid_lower_boundary_link;
>> +int even_distribution_BF;
>> +int even_distribution_legacy;
>> +int even_distribution;
>> +int min_hblank_violated;
>> +s64 delay_start_time_fp;
>> +s64 hbp_time_fp;
>> +s64 hactive_time_fp;
>> +s64 diff_abs_fp;
>> +
>> +s64 ratio;
>> +};
>> +
>> +static int _tu_param_compare(s64 a, s64 b)
>> +{
>> +u32 a_int, a_frac;
>> +u32 b_int, b_frac;
>> +
>> +if (a == b)
>> +return 0;
>> +
>> +a_int = (a >> 32) & 0x7FFFFFFF;
>> +a_frac = a & 0xFFFFFFFF;
>> +
>> +b_int = (b >> 32) & 0x7FFFFFFF;
>> +b_frac = b & 0xFFFFFFFF;
>> +
>> +if (a_int > b_int)
>> +return 1;
>> +else if (a_int < b_int)
>> +return 2;
>> +else if (a_frac > b_frac)
>> +return 1;
>> +else
>> +return 2;
>> +}
>> +
>> +static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
>> +{
>> +s64 temp1_fp, temp2_fp, temp, temp1, temp2;
>> +int compare_result_1, compare_result_2, compare_result_3;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +
>> +tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
>> +
>> +temp = (tu->i_upper_boundary_count *
>> +tu->new_valid_boundary_link +
>> +tu->i_lower_boundary_count *
>> +(tu->new_valid_boundary_link-1));
>> +tu->average_valid2_fp = drm_fixp_from_fraction(temp,
>> +(tu->i_upper_boundary_count +
>> +tu->i_lower_boundary_count));
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
>> +tu->n_tus = drm_fixp2int(temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu->n_remainder_symbols_per_lane_fp = temp2_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +tu->last_partial_tu_fp =
>> +drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
>> +temp1_fp);
>> +
>> +if (tu->n_remainder_symbols_per_lane_fp != 0)
>> +tu->remainder_symbols_exist = 1;
>> +else
>> +tu->remainder_symbols_exist = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
>> +tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
>> +
>> +tu->paired_tus = (int)((tu->n_tus_per_lane) /
>> +(tu->i_upper_boundary_count +
>> + tu->i_lower_boundary_count));
>> +
>> +tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
>> +(tu->i_upper_boundary_count +
>> +tu->i_lower_boundary_count);
>> +
>> +if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
>> +tu->remainder_tus_upper = tu->i_upper_boundary_count;
>> +tu->remainder_tus_lower = tu->remainder_tus -
>> +tu->i_upper_boundary_count;
>> +} else {
>> +tu->remainder_tus_upper = tu->remainder_tus;
>> +tu->remainder_tus_lower = 0;
>> +}
>> +
>> +temp = tu->paired_tus * (tu->i_upper_boundary_count *
>> +tu->new_valid_boundary_link +
>> +tu->i_lower_boundary_count *
>> +(tu->new_valid_boundary_link - 1)) +
>> +(tu->remainder_tus_upper *
>> + tu->new_valid_boundary_link) +
>> +(tu->remainder_tus_lower *
>> +(tu->new_valid_boundary_link - 1));
>> +tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
>> +
>> +if (tu->remainder_symbols_exist) {
>> +temp1_fp = tu->total_valid_fp +
>> +tu->n_remainder_symbols_per_lane_fp;
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
>> +temp2_fp = temp2_fp + tu->last_partial_tu_fp;
>> +temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
>> +} else {
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
>> +temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
>> +}
>> +tu->effective_valid_fp = temp1_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
>> +
>> +tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
>> +
>> +if (temp2_fp)
>> +tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +tu->n_tus_incl_last_incomplete_tu = 0;
>> +
>> +temp1 = 0;
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
>> +temp1_fp = tu->average_valid2_fp - temp2_fp;
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu,
>> 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +temp1 = drm_fixp2int_ceil(temp1_fp);
>> +
>> +temp = tu->i_upper_boundary_count * tu->nlanes;
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +if (temp2_fp)
>> +temp2 = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +temp2 = 0;
>> +tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
>> +
>> +temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
>> +temp2_fp = drm_fixp_from_fraction(
>> +tu->extra_required_bytes_new_tmp, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu->extra_pclk_cycles_tmp = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
>> +temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
>> +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +if (temp1_fp)
>> +tu->extra_pclk_cycles_in_link_clk_tmp =
>> +drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu->extra_pclk_cycles_in_link_clk_tmp = 0;
>> +
>> +tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
>> +
>> +tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
>> +
>> +tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
>> +tu->lower_filler_size_tmp +
>> +tu->extra_buffer_margin;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
>> +tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
>> +
>> +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
>> tu->diff_abs_fp);
>> +if (compare_result_1 == 2)
>> +compare_result_1 = 1;
>> +else
>> +compare_result_1 = 0;
>> +
>> +compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
>> +if (compare_result_2 == 2)
>> +compare_result_2 = 1;
>> +else
>> +compare_result_2 = 0;
>> +
>> +compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
>> +tu->delay_start_time_fp);
>> +if (compare_result_3 == 2)
>> +compare_result_3 = 0;
>> +else
>> +compare_result_3 = 1;
>> +
>> +if (((tu->even_distribution == 1) ||
>> +((tu->even_distribution_BF == 0) &&
>> +(tu->even_distribution_legacy == 0))) &&
>> +tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
>> +compare_result_2 &&
>> +(compare_result_1 || (tu->min_hblank_violated == 1)) &&
>> +(tu->new_valid_boundary_link - 1) > 0 &&
>> +compare_result_3 &&
>> +(tu->delay_start_link_tmp <= 1023)) {
>> +tu->upper_boundary_count = tu->i_upper_boundary_count;
>> +tu->lower_boundary_count = tu->i_lower_boundary_count;
>> +tu->err_fp = tu->n_n_err_fp;
>> +tu->boundary_moderation_en = true;
>> +tu->tu_size_desired = tu->tu_size;
>> +tu->valid_boundary_link = tu->new_valid_boundary_link;
>> +tu->effective_valid_recorded_fp = tu->effective_valid_fp;
>> +tu->even_distribution_BF = 1;
>> +tu->delay_start_link = tu->delay_start_link_tmp;
>> +} else if (tu->boundary_mod_lower_err == 0) {
>> +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
>> +tu->diff_abs_fp);
>> +if (compare_result_1 == 2)
>> +tu->boundary_mod_lower_err = 1;
>> +}
>> +}
>> +
>> +static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
>> +   struct dp_vc_tu_mapping_table *tu_table)
>> +{
>> +struct tu_algo_data tu;
>> +int compare_result_1, compare_result_2;
>> +u64 temp = 0;
>> +s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
>> +
>> +s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006
>> */
>> +s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
>> +s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
>> +s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
>> +
>> +u8 DP_BRUTE_FORCE = 1;
>> +s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1
>> */
>> +uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
>> +uint HBLANK_MARGIN = 4;
>> +
>> +memset(&tu, 0, sizeof(tu));
>> +
>> +tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
>> +tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
>> +tu.lwidth               = in->hactive;
>> +tu.hbp_relative_to_pclk = in->hporch;
>> +tu.nlanes               = in->nlanes;
>> +tu.bpp                  = in->bpp;
>> +tu.pixelEnc             = in->pixel_enc;
>> +tu.dsc_en               = in->dsc_en;
>> +tu.async_en             = in->async_en;
>> +
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
>> +
>> +if (tu.pixelEnc == 420) {
>> +temp_fp = drm_fixp_from_fraction(2, 1);
>> +tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
>> +tu.lwidth /= 2;
>> +tu.hbp_relative_to_pclk /= 2;
>> +}
>> +
>> +if (tu.pixelEnc == 422) {
>> +switch (tu.bpp) {
>> +case 24:
>> +tu.bpp = 16;
>> +tu.bpc = 8;
>> +break;
>> +case 30:
>> +tu.bpp = 20;
>> +tu.bpc = 10;
>> +break;
>> +default:
>> +tu.bpp = 16;
>> +tu.bpc = 8;
>> +break;
>> +}
>> +} else {
>> +tu.bpc = tu.bpp/3;
>> +}
>> +
>> +temp1_fp = drm_fixp_from_fraction(4, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
>> +temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
>> +tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
>> +
>> +tu.original_ratio_fp = tu.ratio_fp;
>> +tu.boundary_moderation_en = false;
>> +tu.upper_boundary_count = 0;
>> +tu.lower_boundary_count = 0;
>> +tu.i_upper_boundary_count = 0;
>> +tu.i_lower_boundary_count = 0;
>> +tu.valid_lower_boundary_link = 0;
>> +tu.even_distribution_BF = 0;
>> +tu.even_distribution_legacy = 0;
>> +tu.even_distribution = 0;
>> +tu.delay_start_time_fp = 0;
>> +
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1);
>> +tu.n_err_fp = 0;
>> +tu.n_n_err_fp = 0;
>> +
>> +tu.ratio = drm_fixp2int(tu.ratio_fp);
>> +if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
>> +!tu.ratio && tu.dsc_en == 0) {
>> +tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
>> +tu.ratio = drm_fixp2int(tu.ratio_fp);
>> +if (tu.ratio)
>> +tu.ratio_fp = drm_fixp_from_fraction(1, 1);
>> +}
>> +
>> +if (tu.ratio > 1)
>> +tu.ratio = 1;
>> +
>> +if (tu.ratio == 1)
>> +goto tu_size_calc;
>> +
>> +compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
>> +if (!compare_result_1 || compare_result_1 == 1)
>> +compare_result_1 = 1;
>> +else
>> +compare_result_1 = 0;
>> +
>> +compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
>> +if (!compare_result_2 || compare_result_2 == 2)
>> +compare_result_2 = 1;
>> +else
>> +compare_result_2 = 0;
>> +
>> +if (tu.dsc_en && compare_result_1 && compare_result_2) {
>> +HBLANK_MARGIN += 4;
>> +DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
>> +}
>> +
>> +tu_size_calc:
>> +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +temp = drm_fixp2int_ceil(temp2_fp);
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +tu.n_err_fp = temp1_fp - temp2_fp;
>> +
>> +if (tu.n_err_fp < tu.err_fp) {
>> +tu.err_fp = tu.n_err_fp;
>> +tu.tu_size_desired = tu.tu_size;
>> +}
>> +}
>> +
>> +tu.tu_size_minus1 = tu.tu_size_desired - 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu.n_tus = drm_fixp2int(temp2_fp);
>> +
>> +tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
>> +DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
>> +tu.valid_boundary_link, tu.n_tus);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +temp = drm_fixp2int(temp2_fp);
>> +if (temp && temp2_fp)
>> +tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +tu.extra_bytes = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
>> +temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
>> +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +temp = drm_fixp2int(temp1_fp);
>> +if (temp && temp1_fp)
>> +tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_pclk_cycles = 0;
>> +
>> +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
>> +temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +temp = drm_fixp2int(temp1_fp);
>> +if (temp && temp1_fp)
>> +tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_pclk_cycles_in_link_clk = 0;
>> +
>> +tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +
>> +tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
>> +tu.filler_size + tu.extra_buffer_margin;
>> +
>> +tu.resulting_valid_fp =
>> +drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
>> +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(
>> +(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
>> +tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
>> +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
>> +
>> +compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
>> +tu.delay_start_time_fp);
>> +if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp)
>> */
>> +tu.min_hblank_violated = 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
>> +
>> +compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
>> +tu.delay_start_time_fp);
>> +if (compare_result_2 == 2)
>> +tu.min_hblank_violated = 1;
>> +
>> +tu.delay_start_time_fp = 0;
>> +
>> +/* brute force */
>> +
>> +tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
>> +tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
>> +
>> +temp = drm_fixp2int(tu.diff_abs_fp);
>> +if (!temp && tu.diff_abs_fp <= 0xffff)
>> +tu.diff_abs_fp = 0;
>> +
>> +/* if(diff_abs < 0) diff_abs *= -1 */
>> +if (tu.diff_abs_fp < 0)
>> +tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
>> +
>> +tu.boundary_mod_lower_err = 0;
>> +if ((tu.diff_abs_fp != 0 &&
>> +((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
>> + (tu.even_distribution_legacy == 0) ||
>> + (DP_BRUTE_FORCE == 1))) ||
>> +(tu.min_hblank_violated == 1)) {
>> +do {
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1);
>> +
>> +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
>> +temp2_fp = drm_fixp_from_fraction(
>> +tu.delay_start_link_extra_pixclk, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu.extra_buffer_margin =
>> +drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_buffer_margin = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.n_symbols = 0;
>> +
>> +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
>> +for (tu.i_upper_boundary_count = 1;
>> +tu.i_upper_boundary_count <= 15;
>> +tu.i_upper_boundary_count++) {
>> +for (tu.i_lower_boundary_count = 1;
>> +tu.i_lower_boundary_count <= 15;
>> +tu.i_lower_boundary_count++) {
>> +_tu_valid_boundary_calc(&tu);
>> +}
>> +}
>> +}
>> +tu.delay_start_link_extra_pixclk--;
>> +} while (tu.boundary_moderation_en != true &&
>> +tu.boundary_mod_lower_err == 1 &&
>> +tu.delay_start_link_extra_pixclk != 0);
>> +
>> +if (tu.boundary_moderation_en == true) {
>> +temp1_fp = drm_fixp_from_fraction(
>> +(tu.upper_boundary_count *
>> +tu.valid_boundary_link +
>> +tu.lower_boundary_count *
>> +(tu.valid_boundary_link - 1)), 1);
>> +temp2_fp = drm_fixp_from_fraction(
>> +(tu.upper_boundary_count +
>> +tu.lower_boundary_count), 1);
>> +tu.resulting_valid_fp =
>> +drm_fixp_div(temp1_fp, temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(
>> +tu.tu_size_desired, 1);
>> +tu.ratio_by_tu_fp =
>> +drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +
>> +tu.valid_lower_boundary_link =
>> +tu.valid_boundary_link - 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp,
>> +tu.resulting_valid_fp);
>> +tu.n_tus = drm_fixp2int(temp2_fp);
>> +
>> +tu.tu_size_minus1 = tu.tu_size_desired - 1;
>> +tu.even_distribution_BF = 1;
>> +
>> +temp1_fp =
>> +drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp =
>> +drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
>> +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
>> +}
>> +}
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
>> +
>> +if (temp2_fp)
>> +temp = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +temp = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
>> +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +temp = drm_fixp2int(temp2_fp);
>> +
>> +if (tu.async_en)
>> +tu.delay_start_link += (int)temp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
>> +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
>> +
>> +/* OUTPUTS */
>> +tu_table->valid_boundary_link       = tu.valid_boundary_link;
>> +tu_table->delay_start_link          = tu.delay_start_link;
>> +tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
>> +tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
>> +tu_table->upper_boundary_count      = tu.upper_boundary_count;
>> +tu_table->lower_boundary_count      = tu.lower_boundary_count;
>> +tu_table->tu_size_minus1            = tu.tu_size_minus1;
>> +
>> +DRM_DEBUG_DP("TU: valid_boundary_link: %d\n",
>> tu_table->valid_boundary_link);
>> +DRM_DEBUG_DP("TU: delay_start_link: %d\n",
>> tu_table->delay_start_link);
>> +DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
>> +tu_table->boundary_moderation_en);
>> +DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
>> +tu_table->valid_lower_boundary_link);
>> +DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
>> +tu_table->upper_boundary_count);
>> +DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
>> +tu_table->lower_boundary_count);
>> +DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
>> +}
>> +
>> +static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
>> +struct dp_vc_tu_mapping_table *tu_table)
>> +{
>> +struct dp_tu_calc_input in;
>> +struct drm_display_mode *drm_mode;
>> +
>> +drm_mode = &ctrl->panel->dp_mode.drm_mode;
>> +
>> +in.lclk = ctrl->link->link_params.rate / 1000;
>> +in.pclk_khz = drm_mode->clock;
>> +in.hactive = drm_mode->hdisplay;
>> +in.hporch = drm_mode->htotal - drm_mode->hdisplay;
>> +in.nlanes = ctrl->link->link_params.num_lanes;
>> +in.bpp = ctrl->panel->dp_mode.bpp;
>> +in.pixel_enc = 444;
>> +in.dsc_en = 0;
>> +in.async_en = 0;
>> +
>> +_dp_ctrl_calc_tu(&in, tu_table);
>> +}
>> +
>> +static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
>> +{
>> +u32 dp_tu = 0x0;
>> +u32 valid_boundary = 0x0;
>> +u32 valid_boundary2 = 0x0;
>> +struct dp_vc_tu_mapping_table tu_calc_table;
>> +
>> +dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
>> +
>> +dp_tu |= tu_calc_table.tu_size_minus1;
>> +valid_boundary |= tu_calc_table.valid_boundary_link;
>> +valid_boundary |= (tu_calc_table.delay_start_link << 16);
>> +
>> +valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
>> +valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
>> +valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
>> +
>> +if (tu_calc_table.boundary_moderation_en)
>> +valid_boundary2 |= BIT(0);
>> +
>> +pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
>> +dp_tu, valid_boundary, valid_boundary2);
>> +
>> +dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
>> +dp_tu, valid_boundary, valid_boundary2);
>> +}
>> +
>> +static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +if (!wait_for_completion_timeout(&ctrl->video_comp,
>> +WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
>> +DRM_ERROR("Link Train timedout\n");
>> +ret = -ETIMEDOUT;
>> +}
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
>> +{
>> +struct dp_link *link = ctrl->link;
>> +int ret = 0, lane, lane_cnt;
>> +u8 buf[4];
>> +u32 max_level_reached = 0;
>> +u32 voltage_swing_level = link->phy_params.v_level;
>> +u32 pre_emphasis_level = link->phy_params.p_level;
>> +
>> +ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
>> +voltage_swing_level, pre_emphasis_level);
>> +if (ret)
>> +return ret;
>> +
>> +if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_DEBUG_DP("max. voltage swing level reached %d\n",
>> +voltage_swing_level);
>> +max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
>> +}
>> +
>> +if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
>> +DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
>> +pre_emphasis_level);
>> +max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
>> +}
>> +
>> +pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
>> +
>> +lane_cnt = ctrl->link->link_params.num_lanes;
>> +for (lane = 0; lane < lane_cnt; lane++)
>> +buf[lane] = voltage_swing_level | pre_emphasis_level |
>> max_level_reached;
>> +
>> +DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level |
>> pre_emphasis_level);
>> +ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET,
>> buf, lane_cnt);
>> +if (ret == lane_cnt)
>> +ret = 0;
>> +
>> +return ret;
>> +}
>> +
>> +static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
>> +u8 pattern)
>> +{
>> +u8 buf;
>> +int ret = 0;
>> +
>> +DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
>> +
>> +buf = pattern;
>> +ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET,
>> buf);
>> +return ret == 1;
>> +}
>> +
>> +static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
>> +    u8 *link_status)
>> +{
>> +int len = 0;
>> +u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
>> +u32 link_status_read_max_retries = 100;
>> +
>> +while (--link_status_read_max_retries) {
>> +len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
>> +link_status);
>> +if (len != DP_LINK_STATUS_SIZE) {
>> +DRM_ERROR("DP link status read failed, err: %d\n", len);
>> +return len;
>> +}
>> +
>> +if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
>> +return 0;
>> +}
>> +
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
>> +{
>> +int tries, old_v_level, ret = 0;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +int const maximum_retries = 5;
>> +
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog,
>> DP_TRAINING_PATTERN_1);
>> +if (ret)
>> +return ret;
>> +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
>> +DP_LINK_SCRAMBLING_DISABLE);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +tries = 0;
>> +old_v_level = ctrl->link->phy_params.v_level;
>> +for (tries = 0; tries < maximum_retries; tries++) {
>> +drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
>> +
>> +ret = dp_ctrl_read_link_status(ctrl, link_status);
>> +if (ret)
>> +return ret;
>> +
>> +if (drm_dp_clock_recovery_ok(link_status,
>> +ctrl->link->link_params.num_lanes)) {
>> +return ret;
>> +}
>> +
>> +if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_ERROR_RATELIMITED("max v_level reached\n");
>> +return -EAGAIN;
>> +}
>> +
>> +if (old_v_level != ctrl->link->phy_params.v_level) {
>> +tries = 0;
>> +old_v_level = ctrl->link->phy_params.v_level;
>> +}
>> +
>> +DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
>> +
>> +dp_link_adjust_levels(ctrl->link, link_status);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +}
>> +
>> +DRM_ERROR("max tries reached\n");
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +switch (ctrl->link->link_params.rate) {
>> +case 810000:
>> +ctrl->link->link_params.rate = 540000;
>> +break;
>> +case 540000:
>> +ctrl->link->link_params.rate = 270000;
>> +break;
>> +case 270000:
>> +case 162000:
>> +default:
>> +ctrl->link->link_params.rate = 162000;
>> +break;
>> +};
>> +
>> +DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
>> +
>> +return ret;
>> +}
>> +
>> +static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
>> +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
>> +}
>> +
>> +static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
>> +{
>> +int tries = 0, ret = 0;
>> +char pattern;
>> +int const maximum_retries = 5;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +if (drm_dp_tps3_supported(ctrl->panel->dpcd))
>> +pattern = DP_TRAINING_PATTERN_3;
>> +else
>> +pattern = DP_TRAINING_PATTERN_2;
>> +
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
>> +if (ret)
>> +return ret;
>> +
>> +dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
>> +
>> +for (tries = 0; tries <= maximum_retries; tries++) {
>> +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
>> +
>> +ret = dp_ctrl_read_link_status(ctrl, link_status);
>> +if (ret)
>> +return ret;
>> +
>> +if (drm_dp_channel_eq_ok(link_status,
>> +ctrl->link->link_params.num_lanes))
>> +return ret;
>> +
>> +dp_link_adjust_levels(ctrl->link, link_status);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +}
>> +
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +u8 encoding = DP_SET_ANSI_8B10B;
>> +struct drm_dp_link link_info = {0};
>> +
>> +ctrl->link->phy_params.p_level = 0;
>> +ctrl->link->phy_params.v_level = 0;
>> +
>> +dp_ctrl_config_ctrl(ctrl);
>> +
>> +ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
>> +if (ret < 0) {
>> +DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +return ret;
>> +}
>> +
>> +drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
>> +drm_dp_dpcd_write(ctrl->aux->drm_aux,
>> DP_MAIN_LINK_CHANNEL_CODING_SET,
>> +&encoding, 1);
>> +
>> +ret = dp_ctrl_link_train_1(ctrl);
>> +if (ret) {
>> +DRM_ERROR("link training #1 failed. ret=%d\n", ret);
>> +goto end;
>> +}
>> +
>> +/* print success info as this is a result of user initiated action */
>> +DRM_DEBUG_DP("link training #1 successful\n");
>> +
>> +ret = dp_ctrl_link_training_2(ctrl);
>> +if (ret) {
>> +DRM_ERROR("link training #2 failed. ret=%d\n", ret);
>> +goto end;
>> +}
>> +
>> +/* print success info as this is a result of user initiated action */
>> +DRM_DEBUG_DP("link training #2 successful\n");
>> +
>> +end:
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +dp_ctrl_clear_training_pattern(ctrl);
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool
>> train)
>> +{
>> +bool mainlink_ready = false;
>> +int ret = 0;
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
>> +
>> +ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
>> +if (ret)
>> +return ret;
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
>> +return ret;
>> +
>> +if (train) {
>> +/*
>> + * As part of previous calls, DP controller state might have
>> + * transitioned to PUSH_IDLE. In order to start transmitting a link
>> + * training pattern, we have to first do a DP software reset.
>> + */
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +
>> +ret = dp_ctrl_link_train(ctrl);
>> +if (ret)
>> +return ret;
>> +}
>> +
>> +/*
>> + * Set up transfer unit values and set controller state to send
>> + * video.
>> + */
>> +dp_ctrl_setup_tr_unit(ctrl);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
>> +
>> +ret = dp_ctrl_wait4video_ready(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
>> +DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT
>> READY");
>> +return ret;
>> +}
>> +
>> +static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
>> +   char *name, u32 rate)
>> +{
>> +u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
>> +struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
>> +
>> +while (num && strcmp(cfg->clk_name, name)) {
>> +num--;
>> +cfg++;
>> +}
>> +
>> +DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
>> +
>> +if (num)
>> +cfg->rate = rate;
>> +else
>> +DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
>> +}
>> +
>> +static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +dp_power_set_link_clk_parent(ctrl->power);
>> +dp_power_set_pixel_clk_parent(ctrl->power);
>> +
>> +dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk",
>> ctrl->link->link_params.rate);
>> +
>> +dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk",
>> ctrl->dp_ctrl.pixel_rate);
>> +
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
>> +if (ret)
>> +DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
>> +
>> +return ret;
>> +}
>> +
>> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("Invalid input data\n");
>> +return -EINVAL;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +ctrl->dp_ctrl.orientation = flip;
>> +
>> +dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
>> +dp_catalog_ctrl_phy_reset(ctrl->catalog);
>> +dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_ctrl_host_deinit() - Uninitialize DP controller
>> + * @ctrl: Display Port Driver data
>> + *
>> + * Perform required steps to uninitialize DP controller
>> + * and its resources.
>> + */
>> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("Invalid input data\n");
>> +return;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
>> +
>> +DRM_DEBUG_DP("Host deinitialized successfully\n");
>> +}
>> +
>> +static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
>> +{
>> +u8 *dpcd = ctrl->panel->dpcd;
>> +
>> +/*
>> + * For better interop experience, used a fixed NVID=0x8000
>> + * whenever connected to a VGA dongle downstream.
>> + */
>> +if (drm_dp_is_branch(dpcd))
>> +return (drm_dp_has_quirk(&ctrl->panel->desc,
>> +DP_DPCD_QUIRK_CONSTANT_N));
>> +
>> +return false;
>> +}
>> +
>> +static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private 
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
>> +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
>> +/*
>> + * Disable and re-enable the mainlink clock since the
>> + * link clock might have been adjusted as part of the
>> + * link maintenance.
>> + */
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
>> +if (ret) {
>> +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +/* hw recommended delay before re-enabling clocks */
>> +msleep(20);
>> +
>> +ret = dp_ctrl_enable_mainlink_clocks(ctrl);
>> +if (ret) {
>> +DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +dp_ctrl_configure_source_params(ctrl);
>> +dp_catalog_ctrl_config_msa(ctrl->catalog,
>> +ctrl->link->link_params.rate,
>> +ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
>> +reinit_completion(&ctrl->idle_comp);
>> +
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +int tries, max_tries = 10;
>> +
>> +dp_ctrl_push_idle(&ctrl->dp_ctrl);
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +
>> +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
>> +
>> +for (tries = 0; tries < max_tries; tries++) {
>> +ret = dp_ctrl_reinitialize_mainlink(ctrl);
>> +if (ret) {
>> +DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
>> +break;
>> +}
>> +
>> +ret = dp_ctrl_setup_main_link(ctrl, true);
>> +if (ret == -EAGAIN) /* try with lower link rate */
>> +dp_ctrl_link_rate_down_shift(ctrl);
>> +}
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +if (!ctrl->link->phy_params.phy_test_pattern_sel) {
>> +DRM_DEBUG_DP("no test pattern selected by sink\n");
>> +return ret;
>> +}
>> +
>> +dp_ctrl_push_idle(&ctrl->dp_ctrl);
>> +/*
>> + * The global reset will need DP link related clocks to be
>> + * running. Add the global reset just before disabling the
>> + * link clocks and core clocks.
>> + */
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +ret = dp_ctrl_off(&ctrl->dp_ctrl);
>> +if (ret) {
>> +DRM_ERROR("failed to disable DP controller\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_ctrl_on(&ctrl->dp_ctrl);
>> +if (ret)
>> +DRM_ERROR("failed to enable DP controller\n");
>> +
>> +return ret;
>> +}
>> +
>> +static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +bool success = false;
>> +u32 pattern_sent = 0x0;
>> +u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
>> +
>> +DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
>> +
>> +if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
>> +ctrl->link->phy_params.v_level,
>> +ctrl->link->phy_params.p_level)) {
>> +DRM_ERROR("Failed to set v/p levels\n");
>> +return false;
>> +}
>> +dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
>> +dp_link_send_test_response(ctrl->link);
>> +
>> +pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
>> +
>> +switch (pattern_sent) {
>> +case MR_LINK_TRAINING1:
>> +success = pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_D10_2;
>> +break;
>> +case MR_LINK_SYMBOL_ERM:
>> +success = (pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_ERROR_RATE)
>> +|| (pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_HBR2_EYE);
>> +break;
>> +case MR_LINK_PRBS7:
>> +success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
>> +break;
>> +case MR_LINK_CUSTOM80:
>> +success = pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
>> +break;
>> +default:
>> +success = false;
>> +}
>> +
>> +DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
>> +pattern_requested);
>> +return success;
>> +}
>> +
>> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +u32 sink_request = 0x0;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +sink_request = ctrl->link->sink_request;
>> +
>> +if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
>> +if (dp_ctrl_process_phy_test_request(ctrl)) {
>> +DRM_ERROR("process phy_test_req failed\n");
>> +return;
>> +}
>> +}
>> +
>> +if (sink_request & DP_LINK_STATUS_UPDATED)
>> +if (dp_ctrl_link_maintenance(ctrl)) {
>> +DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
>> +return;
>> +}
>> +
>> +
>> +if (sink_request & DP_TEST_LINK_TRAINING) {
>> +dp_link_send_test_response(ctrl->link);
>> +if (dp_ctrl_link_maintenance(ctrl)) {
>> +DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
>> +return;
>> +}
>> +}
>> +}
>> +
>> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
>> +{
>> +int rc = 0;
>> +struct dp_ctrl_private *ctrl;
>> +u32 rate = 0;
>> +u32 link_train_max_retries = 10;
>> +u32 const phy_cts_pixel_clk_khz = 148500;
>> +
>> +if (!dp_ctrl)
>> +return -EINVAL;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +rate = ctrl->panel->link_info.rate;
>> +
>> +dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
>> +dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +DRM_DEBUG_DP("using phy test link parameters\n");
>> +if (!ctrl->panel->dp_mode.drm_mode.clock)
>> +ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
>> +} else {
>> +ctrl->link->link_params.rate = rate;
>> +ctrl->link->link_params.num_lanes =
>> +ctrl->panel->link_info.num_lanes;
>> +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
>> +}
>> +
>> +DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
>> +ctrl->link->link_params.rate,
>> +ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
>> +
>> +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
>> +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
>> +
>> +rc = dp_ctrl_enable_mainlink_clocks(ctrl);
>> +if (rc)
>> +return rc;
>> +
>> +while (--link_train_max_retries &&
>> !atomic_read(&ctrl->dp_ctrl.aborted)) {
>> +rc = dp_ctrl_reinitialize_mainlink(ctrl);
>> +if (rc) {
>> +DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
>> +break;
>> +}
>> +rc = dp_ctrl_setup_main_link(ctrl, true);
>> +if (!rc)
>> +break;
>> +/* try with lower link rate */
>> +dp_ctrl_link_rate_down_shift(ctrl);
>> +}
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
>> +dp_ctrl_send_phy_test_pattern(ctrl);
>> +
>> +return rc;
>> +}
>> +
>> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +int ret = 0;
>> +
>> +if (!dp_ctrl)
>> +return -EINVAL;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
>> +if (ret) {
>> +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +DRM_DEBUG_DP("DP off done\n");
>> +return ret;
>> +}
>> +
>> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +u32 isr;
>> +
>> +if (!dp_ctrl)
>> +return;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
>> +
>> +if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
>> +DRM_DEBUG_DP("dp_video_ready\n");
>> +complete(&ctrl->video_comp);
>> +}
>> +
>> +if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
>> +DRM_DEBUG_DP("idle_patterns_sent\n");
>> +complete(&ctrl->idle_comp);
>> +}
>> +}
>> +
>> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
>> struct dp_panel *panel,
>> +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
>> *catalog,
>> +struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct dp_ctrl_private *ctrl;
>> +struct dp_ctrl *dp_ctrl;
>> +
>> +if (!dev || !panel || !aux ||
>> +    !link || !catalog) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
>> +if (!ctrl) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +init_completion(&ctrl->idle_comp);
>> +init_completion(&ctrl->video_comp);
>> +mutex_init(&ctrl->push_idle_mutex);
>> +
>> +/* in parameters */
>> +ctrl->parser   = parser;
>> +ctrl->panel    = panel;
>> +ctrl->power    = power;
>> +ctrl->aux      = aux;
>> +ctrl->link     = link;
>> +ctrl->catalog  = catalog;
>> +ctrl->dev      = dev;
>> +
>> +dp_ctrl = &ctrl->dp_ctrl;
>> +
>> +return dp_ctrl;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl)
>> +return;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +mutex_destroy(&ctrl->push_idle_mutex);
>> +
>> +devm_kfree(ctrl->dev, ctrl);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> new file mode 100644
>> index 0000000..99ab4b2
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> @@ -0,0 +1,34 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_CTRL_H_
>> +#define _DP_CTRL_H_
>> +
>> +#include "dp_aux.h"
>> +#include "dp_panel.h"
>> +#include "dp_link.h"
>> +#include "dp_parser.h"
>> +#include "dp_power.h"
>> +#include "dp_catalog.h"
>> +
>> +struct dp_ctrl {
>> +bool orientation;
>> +atomic_t aborted;
>> +u32 pixel_rate;
>> +};
>> +
>> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
>> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
>> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
>> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
>> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
>> struct dp_panel *panel,
>> +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
>> *catalog,
>> +struct dp_parser *parser);
>> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
>> +
>> +#endif /* _DP_CTRL_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> new file mode 100644
>> index 0000000..a893542
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -0,0 +1,949 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/debugfs.h>
>> +#include <linux/component.h>
>> +#include <linux/of_irq.h>
>> +
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +#include "dp_extcon.h"
>> +#include "dp_parser.h"
>> +#include "dp_power.h"
>> +#include "dp_catalog.h"
>> +#include "dp_aux.h"
>> +#include "dp_link.h"
>> +#include "dp_panel.h"
>> +#include "dp_ctrl.h"
>> +#include "dp_display.h"
>> +#include "dp_drm.h"
>> +
>> +static struct msm_dp *g_dp_display;
>> +#define HPD_STRING_SIZE 30
>> +
>> +struct dp_display_private {
>> +char *name;
>> +int irq;
>> +
>> +/* state variables */
>> +bool core_initialized;
>> +bool power_on;
>> +bool hpd_irq_on;
>> +bool audio_supported;
>> +
>> +struct platform_device *pdev;
>> +struct dentry *root;
>> +struct completion notification_comp;
>> +
>> +struct dp_usbpd   *usbpd;
>> +struct dp_parser  *parser;
>> +struct dp_power   *power;
>> +struct dp_catalog *catalog;
>> +struct dp_aux     *aux;
>> +struct dp_link    *link;
>> +struct dp_panel   *panel;
>> +struct dp_ctrl    *ctrl;
>> +
>> +struct dp_usbpd_cb usbpd_cb;
>> +struct dp_display_mode dp_mode;
>> +struct msm_dp dp_display;
>> +};
>> +
>> +static const struct of_device_id dp_dt_match[] = {
>> +{.compatible = "qcom,dp-display"},
>> +{}
>> +};
>> +
>> +static irqreturn_t dp_display_irq(int irq, void *dev_id)
>> +{
>> +struct dp_display_private *dp = dev_id;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid data\n");
>> +return IRQ_NONE;
>> +}
>> +
>> +/* DP controller isr */
>> +dp_ctrl_isr(dp->ctrl);
>> +
>> +/* DP aux isr */
>> +dp_aux_isr(dp->aux);
>> +
>> +return IRQ_HANDLED;
>> +}
>> +
>> +static int dp_display_bind(struct device *dev, struct device *master,
>> +   void *data)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +struct drm_device *drm;
>> +struct msm_drm_private *priv;
>> +struct platform_device *pdev = to_platform_device(dev);
>> +
>> +if (!dev || !pdev || !master) {
>> +DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
>> +dev, pdev, master);
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +drm = dev_get_drvdata(master);
>> +dp = platform_get_drvdata(pdev);
>> +if (!drm || !dp) {
>> +DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
>> +drm, dp);
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp->dp_display.drm_dev = drm;
>> +priv = drm->dev_private;
>> +priv->dp = &(dp->dp_display);
>> +
>> +rc = dp->parser->parse(dp->parser);
>> +if (rc) {
>> +DRM_ERROR("device tree parsing failed\n");
>> +goto end;
>> +}
>> +
>> +rc = dp_aux_register(dp->aux);
>> +if (rc) {
>> +DRM_ERROR("DRM DP AUX register failed\n");
>> +goto end;
>> +}
>> +
>> +rc = dp_power_client_init(dp->power);
>> +if (rc) {
>> +DRM_ERROR("Power client create failed\n");
>> +goto end;
>> +}
>> +
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_unbind(struct device *dev, struct device
>> *master,
>> +      void *data)
>> +{
>> +struct dp_display_private *dp;
>> +struct platform_device *pdev = to_platform_device(dev);
>> +struct drm_device *drm = dev_get_drvdata(master);
>> +struct msm_drm_private *priv = drm->dev_private;
>> +
>> +if (!dev || !pdev) {
>> +DRM_ERROR("invalid param(s)\n");
>> +return;
>> +}
>> +
>> +dp = platform_get_drvdata(pdev);
>> +if (!dp) {
>> +DRM_ERROR("Invalid params\n");
>> +return;
>> +}
>> +
>> +(void)dp_power_client_deinit(dp->power);
>> +(void)dp_aux_unregister(dp->aux);
>> +priv->dp = NULL;
>> +}
>> +
>> +static const struct component_ops dp_display_comp_ops = {
>> +.bind = dp_display_bind,
>> +.unbind = dp_display_unbind,
>> +};
>> +
>> +static bool dp_display_is_ds_bridge(struct dp_panel *panel)
>> +{
>> +return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
>> +DP_DWN_STRM_PORT_PRESENT);
>> +}
>> +
>> +static bool dp_display_is_sink_count_zero(struct dp_display_private
>> *dp)
>> +{
>> +return dp_display_is_ds_bridge(dp->panel) &&
>> +(dp->link->sink_count == 0);
>> +}
>> +
>> +static void dp_display_send_hpd_event(struct msm_dp *dp_display)
>> +{
>> +struct dp_display_private *dp;
>> +struct drm_connector *connector;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +connector = dp->dp_display.connector;
>> +drm_helper_hpd_irq_event(connector->dev);
>> +}
>> +
>> +static int dp_display_send_hpd_notification(struct dp_display_private
>> *dp,
>> +    bool hpd)
>> +{
>> +static bool encoder_mode_set = false;
>> +struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
>> +struct msm_kms *kms = priv->kms;
>> +
>> +mutex_lock(&dp->dp_display.connect_mutex);
>> +if ((hpd && dp->dp_display.is_connected) ||
>> +(!hpd && !dp->dp_display.is_connected)) {
>> +DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return 0;
>> +}
>> +
>> +/* reset video pattern flag on disconnect */
>> +if (!hpd)
>> +dp->panel->video_test = false;
>> +
>> +dp->dp_display.is_connected = hpd;
>> +reinit_completion(&dp->notification_comp);
>> +
>> +if (dp->dp_display.is_connected && dp->dp_display.encoder
>> +&& !encoder_mode_set
>> +&& kms->funcs->set_encoder_mode) {
>> +kms->funcs->set_encoder_mode(kms,
>> +dp->dp_display.encoder, false);
>> +DRM_DEBUG_DP("set_encoder_mode() Completed\n");
>> +encoder_mode_set = true;
>> +}
>> +
>> +dp_display_send_hpd_event(&dp->dp_display);
>> +
>> +if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
>> +pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return -EINVAL;
>> +}
>> +
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return 0;
>> +}
>> +
>> +static int dp_display_process_hpd_high(struct dp_display_private *dp)
>> +{
>> +int rc = 0;
>> +struct edid *edid;
>> +
>> +dp_aux_init(dp->aux, dp->parser->aux_cfg);
>> +
>> +if (dp->link->psm_enabled)
>> +goto notify;
>> +
>> +rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
>> +if (rc)
>> +goto notify;
>> +
>> +dp_link_process_request(dp->link);
>> +
>> +if (dp_display_is_sink_count_zero(dp)) {
>> +DRM_DEBUG_DP("no downstream devices connected\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +edid = dp->panel->edid;
>> +
>> +dp->audio_supported = drm_detect_monitor_audio(edid);
>> +
>> +dp_panel_handle_sink_request(dp->panel);
>> +
>> +dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
>> +notify:
>> +dp_display_send_hpd_notification(dp, true);
>> +
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_host_init(struct dp_display_private *dp)
>> +{
>> +bool flip = false;
>> +
>> +if (dp->core_initialized) {
>> +DRM_DEBUG_DP("DP core already initialized\n");
>> +return;
>> +}
>> +
>> +if (dp->usbpd->orientation == ORIENTATION_CC2)
>> +flip = true;
>> +
>> +dp_power_init(dp->power, flip);
>> +dp_ctrl_host_init(dp->ctrl, flip);
>> +enable_irq(dp->irq);
>> +dp->core_initialized = true;
>> +}
>> +
>> +static void dp_display_host_deinit(struct dp_display_private *dp)
>> +{
>> +if (!dp->core_initialized) {
>> +DRM_DEBUG_DP("DP core already off\n");
>> +return;
>> +}
>> +
>> +dp_ctrl_host_deinit(dp->ctrl);
>> +dp_aux_deinit(dp->aux);
>> +dp_power_deinit(dp->power);
>> +disable_irq(dp->irq);
>> +dp->core_initialized = false;
>> +}
>> +
>> +static void dp_display_process_hpd_low(struct dp_display_private *dp)
>> +{
>> +dp_display_send_hpd_notification(dp, false);
>> +
>> +dp_aux_deinit(dp->aux);
>> +}
>> +
>> +static int dp_display_usbpd_configure_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +rc = -ENODEV;
>> +goto end;
>> +}
>> +
>> +dp_display_host_init(dp);
>> +
>> +if (dp->usbpd->hpd_high)
>> +dp_display_process_hpd_high(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_clean(struct dp_display_private *dp)
>> +{
>> +dp_ctrl_push_idle(dp->ctrl);
>> +dp_ctrl_off(dp->ctrl);
>> +}
>> +
>> +static int dp_display_usbpd_disconnect_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +rc = -ENODEV;
>> +goto end;
>> +}
>> +
>> +rc = dp_display_send_hpd_notification(dp, false);
>> +
>> +/* if cable is disconnected, reset psm_enabled flag */
>> +if (!dp->usbpd->alt_mode_cfg_done)
>> +dp->link->psm_enabled = false;
>> +
>> +if ((rc < 0) && dp->power_on)
>> +dp_display_clean(dp);
>> +
>> +dp_display_host_deinit(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_handle_video_request(struct dp_display_private
>> *dp)
>> +{
>> +if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
>> +/* force disconnect followed by connect */
>> +dp->usbpd->connect(dp->usbpd, false);
>> +dp->panel->video_test = true;
>> +dp->usbpd->connect(dp->usbpd, true);
>> +dp_link_send_test_response(dp->link);
>> +}
>> +}
>> +
>> +static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
>> +{
>> +if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
>> +dp_display_send_hpd_notification(dp, false);
>> +
>> +if (dp_display_is_sink_count_zero(dp)) {
>> +DRM_DEBUG_DP("sink count is zero, nothing to do\n");
>> +return 0;
>> +}
>> +
>> +return dp_display_process_hpd_high(dp);
>> +}
>> +
>> +dp_ctrl_handle_sink_request(dp->ctrl);
>> +
>> +dp_display_handle_video_request(dp);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_display_usbpd_attention_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +return -ENODEV;
>> +}
>> +
>> +if (dp->usbpd->hpd_irq) {
>> +dp->hpd_irq_on = true;
>> +
>> +rc = dp_link_process_request(dp->link);
>> +/* check for any test request issued by sink */
>> +if (!rc)
>> +dp_display_handle_hpd_irq(dp);
>> +
>> +dp->hpd_irq_on = false;
>> +goto end;
>> +}
>> +
>> +if (!dp->usbpd->hpd_high) {
>> +dp_display_process_hpd_low(dp);
>> +goto end;
>> +}
>> +
>> +if (dp->usbpd->alt_mode_cfg_done)
>> +dp_display_process_hpd_high(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_deinit_sub_modules(struct dp_display_private
>> *dp)
>> +{
>> +dp_ctrl_put(dp->ctrl);
>> +dp_link_put(dp->link);
>> +dp_panel_put(dp->panel);
>> +dp_aux_put(dp->aux);
>> +dp_power_put(dp->power);
>> +dp_catalog_put(dp->catalog);
>> +dp_parser_put(dp->parser);
>> +}
>> +
>> +static int dp_init_sub_modules(struct dp_display_private *dp)
>> +{
>> +int rc = 0;
>> +struct device *dev = &dp->pdev->dev;
>> +struct dp_usbpd_cb *cb = &dp->usbpd_cb;
>> +struct dp_panel_in panel_in = {
>> +.dev = dev,
>> +};
>> +
>> +/* Callback APIs used for cable status change event */
>> +cb->configure  = dp_display_usbpd_configure_cb;
>> +cb->disconnect = dp_display_usbpd_disconnect_cb;
>> +cb->attention  = dp_display_usbpd_attention_cb;
>> +
>> +dp->parser = dp_parser_get(dp->pdev);
>> +if (IS_ERR(dp->parser)) {
>> +rc = PTR_ERR(dp->parser);
>> +DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
>> +dp->parser = NULL;
>> +goto error_parser;
>> +}
>> +
>> +dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>> +if (IS_ERR(dp->catalog)) {
>> +rc = PTR_ERR(dp->catalog);
>> +DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
>> +dp->catalog = NULL;
>> +goto error_catalog;
>> +}
>> +
>> +dp->power = dp_power_get(dp->parser);
>> +if (IS_ERR(dp->power)) {
>> +rc = PTR_ERR(dp->power);
>> +DRM_ERROR("failed to initialize power, rc = %d\n", rc);
>> +dp->power = NULL;
>> +goto error_power;
>> +}
>> +
>> +dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
>> +if (IS_ERR(dp->aux)) {
>> +rc = PTR_ERR(dp->aux);
>> +DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
>> +dp->aux = NULL;
>> +goto error_aux;
>> +}
>> +
>> +dp->link = dp_link_get(dev, dp->aux);
>> +if (IS_ERR(dp->link)) {
>> +rc = PTR_ERR(dp->link);
>> +DRM_ERROR("failed to initialize link, rc = %d\n", rc);
>> +dp->link = NULL;
>> +goto error_link;
>> +}
>> +
>> +panel_in.aux = dp->aux;
>> +panel_in.catalog = dp->catalog;
>> +panel_in.link = dp->link;
>> +
>> +dp->panel = dp_panel_get(&panel_in);
>> +if (IS_ERR(dp->panel)) {
>> +rc = PTR_ERR(dp->panel);
>> +DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>> +dp->panel = NULL;
>> +goto error_panel;
>> +}
>> +
>> +dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
>> +       dp->power, dp->catalog, dp->parser);
>> +if (IS_ERR(dp->ctrl)) {
>> +rc = PTR_ERR(dp->ctrl);
>> +DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
>> +dp->ctrl = NULL;
>> +goto error_ctrl;
>> +}
>> +
>> +return rc;
>> +error_ctrl:
>> +dp_panel_put(dp->panel);
>> +error_panel:
>> +dp_link_put(dp->link);
>> +error_link:
>> +dp_aux_put(dp->aux);
>> +error_aux:
>> +dp_power_put(dp->power);
>> +error_power:
>> +dp_catalog_put(dp->catalog);
>> +error_catalog:
>> +dp_parser_put(dp->parser);
>> +error_parser:
>> +return rc;
>> +}
>> +
>> +static int dp_display_set_mode(struct msm_dp *dp_display,
>> +       struct dp_display_mode *mode)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +dp->panel->dp_mode.drm_mode = mode->drm_mode;
>> +dp->panel->dp_mode.bpp = mode->bpp;
>> +dp->panel->dp_mode.capabilities = mode->capabilities;
>> +dp_panel_init_panel_info(dp->panel);
>> +return rc;
>> +}
>> +
>> +static int dp_display_prepare(struct msm_dp *dp)
>> +{
>> +return 0;
>> +}
>> +
>> +static int dp_display_enable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (dp->power_on) {
>> +DRM_DEBUG_DP("Link already setup, return\n");
>> +return 0;
>> +}
>> +
>> +dp_aux_init(dp->aux, dp->parser->aux_cfg);
>> +
>> +rc = dp_ctrl_on(dp->ctrl);
>> +if (!rc)
>> +dp->power_on = true;
>> +
>> +return rc;
>> +}
>> +
>> +static int dp_display_post_enable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +complete_all(&dp->notification_comp);
>> +return rc;
>> +}
>> +
>> +static int dp_display_pre_disable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (dp->usbpd->alt_mode_cfg_done)
>> +dp_link_psm_config(dp->link, &dp->panel->link_info, true);
>> +
>> +dp_ctrl_push_idle(dp->ctrl);
>> +return rc;
>> +}
>> +
>> +static int dp_display_disable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (!dp->power_on || !dp->core_initialized)
>> +goto error;
>> +
>> +dp_ctrl_off(dp->ctrl);
>> +
>> +dp->power_on = false;
>> +
>> +complete_all(&dp->notification_comp);
>> +error:
>> +return rc;
>> +}
>> +
>> +int dp_display_request_irq(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dp_display) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
>> +if (dp->irq < 0) {
>> +rc = dp->irq;
>> +DRM_ERROR("failed to get irq: %d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
>> +IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
>> +if (rc < 0) {
>> +DRM_ERROR("failed to request IRQ%u: %d\n",
>> +dp->irq, rc);
>> +return rc;
>> +}
>> +disable_irq(dp->irq);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_display_unprepare(struct msm_dp *dp)
>> +{
>> +return 0;
>> +}
>> +
>> +int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
>> +{
>> +const u32 num_components = 3, default_bpp = 24;
>> +struct dp_display_private *dp_display;
>> +struct drm_dp_link *link_info;
>> +u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
>> +
>> +if (!dp || !mode_pclk_khz || !dp->connector) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +link_info = &dp_display->panel->link_info;
>> +
>> +mode_bpp = dp->connector->display_info.bpc * num_components;
>> +if (!mode_bpp)
>> +mode_bpp = default_bpp;
>> +
>> +mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
>> +mode_bpp, mode_pclk_khz);
>> +
>> +mode_rate_khz = mode_pclk_khz * mode_bpp;
>> +supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
>> +
>> +if (mode_rate_khz > supported_rate_khz)
>> +return MODE_BAD;
>> +
>> +return MODE_OK;
>> +}
>> +
>> +int dp_display_get_modes(struct msm_dp *dp,
>> +struct dp_display_mode *dp_mode)
>> +{
>> +struct dp_display_private *dp_display;
>> +int ret = 0;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return 0;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +ret = dp_panel_get_modes(dp_display->panel,
>> +dp->connector, dp_mode);
>> +if (dp_mode->drm_mode.clock)
>> +dp->max_pclk_khz = dp_mode->drm_mode.clock;
>> +return ret;
>> +}
>> +
>> +bool dp_display_check_video_test(struct msm_dp *dp)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return false;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +if (dp_display->panel->video_test)
>> +return true;
>> +
>> +return false;
>> +}
>> +
>> +int dp_display_get_test_bpp(struct msm_dp *dp)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return 0;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +return dp_link_bit_depth_to_bpp(
>> +dp_display->link->test_video.test_bit_depth);
>> +}
>> +
>> +static int dp_display_probe(struct platform_device *pdev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!pdev || !pdev->dev.of_node) {
>> +DRM_ERROR("pdev not found\n");
>> +return -ENODEV;
>> +}
>> +
>> +dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
>> +if (!dp)
>> +return -ENOMEM;
>> +
>> +init_completion(&dp->notification_comp);
>> +
>> +dp->pdev = pdev;
>> +dp->name = "drm_dp";
>> +
>> +rc = dp_init_sub_modules(dp);
>> +if (rc) {
>> +DRM_ERROR("init sub module failed\n");
>> +devm_kfree(&pdev->dev, dp);
>> +return -EPROBE_DEFER;
>> +}
>> +
>> +platform_set_drvdata(pdev, dp);
>> +
>> +mutex_init(&dp->dp_display.connect_mutex);
>> +g_dp_display = &dp->dp_display;
>> +
>> +rc = component_add(&pdev->dev, &dp_display_comp_ops);
>> +if (rc) {
>> +DRM_ERROR("component add failed, rc=%d\n", rc);
>> +dp_display_deinit_sub_modules(dp);
>> +devm_kfree(&pdev->dev, dp);
>> +}
>> +
>> +return rc;
>> +}
>> +
>> +static int dp_display_remove(struct platform_device *pdev)
>> +{
>> +struct dp_display_private *dp;
>> +
>> +if (!pdev)
>> +return -EINVAL;
>> +
>> +dp = platform_get_drvdata(pdev);
>> +
>> +dp_display_deinit_sub_modules(dp);
>> +
>> +platform_set_drvdata(pdev, NULL);
>> +devm_kfree(&pdev->dev, dp);
>> +
>> +return 0;
>> +}
>> +
>> +static struct platform_driver dp_display_driver = {
>> +.probe  = dp_display_probe,
>> +.remove = dp_display_remove,
>> +.driver = {
>> +.name = "msm-dp-display",
>> +.of_match_table = dp_dt_match,
>> +},
>> +};
>> +
>> +int __init msm_dp_register(void)
>> +{
>> +int ret;
>> +
>> +ret = platform_driver_register(&dp_display_driver);
>> +if (ret) {
>> +DRM_ERROR("driver register failed");
>> +return ret;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +void __exit msm_dp_unregister(void)
>> +{
>> +platform_driver_unregister(&dp_display_driver);
>> +}
>> +
>> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
>> *dev,
>> +struct drm_encoder *encoder)
>> +{
>> +struct msm_drm_private *priv;
>> +int ret;
>> +
>> +if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
>> +return -EINVAL;
>> +
>> +priv = dev->dev_private;
>> +dp_display->drm_dev = dev;
>> +
>> +ret = dp_display_request_irq(dp_display);
>> +if (ret) {
>> +DRM_ERROR("request_irq failed, ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +dp_display->encoder = encoder;
>> +
>> +dp_display->connector = dp_drm_connector_init(dp_display);
>> +if (IS_ERR(dp_display->connector)) {
>> +ret = PTR_ERR(dp_display->connector);
>> +DRM_DEV_ERROR(dev->dev,
>> +"failed to create dp connector: %d\n", ret);
>> +dp_display->connector = NULL;
>> +return ret;
>> +}
>> +
>> +priv->connectors[priv->num_connectors++] = dp_display->connector;
>> +return 0;
>> +}
>> +
>> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
>> *encoder)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp_display;
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +if (!dp_display->dp_mode.drm_mode.clock) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +rc = dp_display_set_mode(dp, &dp_display->dp_mode);
>> +if (rc) {
>> +DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_prepare(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_enable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display enable failed, rc=%d\n", rc);
>> +dp_display_unprepare(dp);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_post_enable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
>> +dp_display_disable(dp);
>> +dp_display_unprepare(dp);
>> +}
>> +return rc;
>> +}
>> +
>> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
>> *encoder)
>> +{
>> +int rc = 0;
>> +
>> +rc = dp_display_pre_disable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_disable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display disable failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_unprepare(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
>> +}
>> +return rc;
>> +}
>> +
>> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
>> *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
>> +
>> +if (dp_display_check_video_test(dp))
>> +dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
>> +else /* Default num_components per pixel = 3 */
>> +dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
>> +
>> +if (!dp_display->dp_mode.bpp)
>> +dp_display->dp_mode.bpp = 24; /* Default bpp */
>> +
>> +drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
>> +
>> +dp_display->dp_mode.v_active_low =
>> +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
>> +
>> +dp_display->dp_mode.h_active_low =
>> +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h
>> b/drivers/gpu/drm/msm/dp/dp_display.h
>> new file mode 100644
>> index 0000000..c916408
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
>> @@ -0,0 +1,29 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_DISPLAY_H_
>> +#define _DP_DISPLAY_H_
>> +
>> +#include <drm/drmP.h>
>> +
>> +#include "dp_panel.h"
>> +
>> +struct msm_dp {
>> +struct drm_device *drm_dev;
>> +struct drm_connector *connector;
>> +struct drm_encoder *encoder;
>> +bool is_connected;
>> +struct mutex connect_mutex;
>> +u32 max_pclk_khz;
>> +};
>> +
>> +int dp_display_validate_mode(struct msm_dp *dp_display, u32
>> mode_pclk_khz);
>> +int dp_display_get_modes(struct msm_dp *dp_display,
>> +struct dp_display_mode *dp_mode);
>> +int dp_display_request_irq(struct msm_dp *dp_display);
>> +bool dp_display_check_video_test(struct msm_dp *dp_display);
>> +int dp_display_get_test_bpp(struct msm_dp *dp_display);
>> +
>> +#endif /* _DP_DISPLAY_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c
>> b/drivers/gpu/drm/msm/dp/dp_drm.c
>> new file mode 100644
>> index 0000000..a72b0bb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
>> @@ -0,0 +1,173 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp]: %s: " fmt, __func__
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_crtc.h>
>> +
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +#include "dp_drm.h"
>> +
>> +struct dp_connector {
>> +struct drm_connector base;
>> +struct msm_dp *dp_display;
>> +};
>> +#define to_dp_connector(x) container_of(x, struct dp_connector, base)
>> +
>> +/**
>> + * dp_connector_detect - callback to determine if connector is
>> connected
>> + * @connector: Pointer to drm connector structure
>> + * @force: Force detect setting from drm framework
>> + * Returns: Connector 'is connected' status
>> + */
>> +static enum drm_connector_status dp_connector_detect(struct
>> drm_connector *conn,
>> +bool force)
>> +{
>> +struct msm_dp *dp;
>> +
>> +dp = to_dp_connector(conn)->dp_display;
>> +
>> +DRM_DEBUG_DP("is_connected = %s\n",
>> +(dp->is_connected) ? "true" : "false");
>> +
>> +return (dp->is_connected) ? connector_status_connected :
>> +connector_status_disconnected;
>> +}
>> +
>> +/**
>> + * dp_connector_get_modes - callback to add drm modes via
>> drm_mode_probed_add()
>> + * @connector: Pointer to drm connector structure
>> + * Returns: Number of modes added
>> + */
>> +static int dp_connector_get_modes(struct drm_connector *connector)
>> +{
>> +int rc = 0;
>> +struct msm_dp *dp;
>> +struct dp_display_mode *dp_mode = NULL;
>> +struct drm_display_mode *m, drm_mode;
>> +
>> +if (!connector)
>> +return 0;
>> +
>> +dp = to_dp_connector(connector)->dp_display;
>> +
>> +dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
>> +if (!dp_mode)
>> +return 0;
>> +
>> +mutex_lock(&dp->connect_mutex);
>> +/* pluggable case assumes EDID is read when HPD */
>> +if (dp->is_connected) {
>> +/*
>> + *The get_modes() function might return one mode that is stored
>> + * in dp_mode when compliance test is in progress. If not, the
>> + * return value is equal to the total number of modes supported
>> + * by the sink
>> + */
>> +rc = dp_display_get_modes(dp, dp_mode);
>> +if (rc <= 0) {
>> +DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
>> +mutex_unlock(&dp->connect_mutex);
>> +return rc;
>> +}
>> +if (dp_mode->drm_mode.clock) { /* valid DP mode */
>> +memset(&drm_mode, 0x0, sizeof(drm_mode));
>> +drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
>> +m = drm_mode_duplicate(connector->dev, &drm_mode);
>> +if (!m) {
>> +DRM_ERROR("failed to add mode %ux%u\n",
>> +       drm_mode.hdisplay,
>> +       drm_mode.vdisplay);
>> +kfree(dp_mode);
>> +mutex_unlock(&dp->connect_mutex);
>> +return 0;
>> +}
>> +drm_mode_probed_add(connector, m);
>> +}
>> +} else {
>> +DRM_DEBUG_DP("No sink connected\n");
>> +}
>> +mutex_unlock(&dp->connect_mutex);
>> +kfree(dp_mode);
>> +return rc;
>> +}
>> +
>> +/**
>> + * dp_connector_mode_valid - callback to determine if specified mode
>> is valid
>> + * @connector: Pointer to drm connector structure
>> + * @mode: Pointer to drm mode structure
>> + * Returns: Validity status for specified mode
>> + */
>> +static enum drm_mode_status dp_connector_mode_valid(struct
>> drm_connector *connector,
>> +struct drm_display_mode *mode)
>> +{
>> +struct msm_dp *dp_disp;
>> +
>> +if (!mode || !connector) {
>> +DRM_ERROR("invalid params\n");
>> +return MODE_ERROR;
>> +}
>> +
>> +dp_disp = to_dp_connector(connector)->dp_display;
>> +
>> +mode->vrefresh = drm_mode_vrefresh(mode);
>> +
>> +if ((dp_disp->max_pclk_khz <= 0) ||
>> +(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
>> +(mode->clock > dp_disp->max_pclk_khz))
>> +return MODE_BAD;
>> +
>> +return dp_display_validate_mode(dp_disp, mode->clock);
>> +}
>> +
>> +static const struct drm_connector_funcs dp_connector_funcs = {
>> +.detect = dp_connector_detect,
>> +.fill_modes = drm_helper_probe_single_connector_modes,
>> +.destroy = drm_connector_cleanup,
>> +.reset = drm_atomic_helper_connector_reset,
>> +.atomic_duplicate_state =
>> drm_atomic_helper_connector_duplicate_state,
>> +.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static const struct drm_connector_helper_funcs
>> dp_connector_helper_funcs = {
>> +.get_modes = dp_connector_get_modes,
>> +.mode_valid = dp_connector_mode_valid,
>> +};
>> +
>> +/* connector initialization */
>> +struct drm_connector *dp_drm_connector_init(struct msm_dp 
>> *dp_display)
>> +{
>> +struct drm_connector *connector = NULL;
>> +struct dp_connector *dp_connector;
>> +int ret;
>> +
>> +dp_connector = devm_kzalloc(dp_display->drm_dev->dev,
>> sizeof(*dp_connector),
>> +    GFP_KERNEL);
>> +if (!dp_connector)
>> +return ERR_PTR(-ENOMEM);
>> +
>> +dp_connector->dp_display = dp_display;
>> +
>> +connector = &dp_connector->base;
>> +
>> +ret = drm_connector_init(dp_display->drm_dev, connector,
>> &dp_connector_funcs,
>> +DRM_MODE_CONNECTOR_DisplayPort);
>> +if (ret)
>> +return ERR_PTR(ret);
>> +
>> +drm_connector_helper_add(connector, &dp_connector_helper_funcs);
>> +
>> +/*
>> + * Enable HPD to let hpd event is handled when cable is attached to
>> the host.
>> + */
>> +connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +drm_connector_attach_encoder(connector, dp_display->encoder);
>> +
>> +return connector;
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h
>> b/drivers/gpu/drm/msm/dp/dp_drm.h
>> new file mode 100644
>> index 0000000..cf472c5
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_DRM_H_
>> +#define _DP_DRM_H_
>> +
>> +#include <linux/types.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +
>> +#include "msm_drv.h"
>> +#include "dp_display.h"
>> +
>> +struct drm_connector *dp_drm_connector_init(struct msm_dp
>> *dp_display);
>> +
>> +#endif /* _DP_DRM_H_ */
>> +
>> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c
>> b/drivers/gpu/drm/msm/dp/dp_extcon.c
>> new file mode 100644
>> index 0000000..0fb34ef
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
>> @@ -0,0 +1,216 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/slab.h>
>> +#include <linux/device.h>
>> +#include <linux/extcon.h>
>> +#include <drm/drmP.h>
>> +
>> +#include "dp_extcon.h"
>> +
>> +/* DP specific VDM commands */
>> +#define DP_USBPD_VDM_STATUS0x10
>> +#define DP_USBPD_VDM_CONFIGURE0x11
>> +
>> +/* USBPD-TypeC specific Macros */
>> +#define VDM_VERSION0x0
>> +#define USB_C_DP_SID0xFF01
>> +
>> +struct dp_extcon_private {
>> +u32 vdo;
>> +struct device *dev;
>> +struct notifier_block extcon_nb;
>> +struct extcon_dev *extcon;
>> +struct workqueue_struct *extcon_wq;
>> +struct work_struct event_work;
>> +struct usbpd *pd;
>> +struct dp_usbpd_cb *dp_cb;
>> +struct dp_usbpd dp_usbpd;
>> +};
>> +
>> +static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
>> +{
>> +int rc = 0;
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +dp_usbpd->hpd_high = hpd;
>> +
>> +if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
>> +&& !extcon_priv->dp_cb->disconnect) {
>> +DRM_ERROR("extcon dp_cb not initialized\n");
>> +return -EINVAL;
>> +}
>> +if (hpd)
>> +extcon_priv->dp_cb->configure(extcon_priv->dev);
>> +else
>> +extcon_priv->dp_cb->disconnect(extcon_priv->dev);
>> +
>> +return rc;
>> +}
>> +
>> +static void dp_extcon_event_work(struct work_struct *work)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +int dp_state, ret;
>> +union extcon_property_value property;
>> +
>> +extcon_priv = container_of(work,
>> +struct dp_extcon_private, event_work);
>> +
>> +if (!extcon_priv || !extcon_priv->extcon) {
>> +DRM_ERROR("Invalid extcon device handler\n");
>> +return;
>> +}
>> +
>> +dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
>> +
>> +if (dp_state > 0) {
>> +ret = extcon_get_property(extcon_priv->extcon,
>> +EXTCON_DISP_DP,
>> +EXTCON_PROP_USB_TYPEC_POLARITY,
>> +&property);
>> +if (ret) {
>> +DRM_ERROR("Get Polarity property failed\n");
>> +return;
>> +}
>> +extcon_priv->dp_usbpd.orientation =
>> +(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
>> +
>> +extcon_get_property(extcon_priv->extcon,
>> +EXTCON_DISP_DP,
>> +EXTCON_PROP_USB_SS,
>> +&property);
>> +extcon_priv->dp_usbpd.multi_func =
>> +((property.intval) ? true : false);
>> +
>> +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
>> +if (ret) {
>> +DRM_ERROR("extcon_connect->true failed\n");
>> +return;
>> +}
>> +} else {
>> +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
>> +if (ret) {
>> +DRM_ERROR("extcon_connect->false failed\n");
>> +return;
>> +}
>> +}
>> +}
>> +
>> +static int dp_extcon_event_notify(struct notifier_block *nb,
>> +  unsigned long event, void *priv)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +extcon_priv = container_of(nb, struct dp_extcon_private,
>> +extcon_nb);
>> +
>> +queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
>> +return NOTIFY_DONE;
>> +}
>> +
>> +int dp_extcon_register(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +int ret = 0;
>> +
>> +if (!dp_usbpd)
>> +return -EINVAL;
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
>> +ret = devm_extcon_register_notifier(extcon_priv->dev,
>> extcon_priv->extcon,
>> +    EXTCON_DISP_DP,
>> +    &extcon_priv->extcon_nb);
>> +if (ret) {
>> +DRM_DEV_ERROR(extcon_priv->dev,
>> +"register EXTCON_DISP_DP notifier err\n");
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +extcon_priv->extcon_wq =
>> create_singlethread_workqueue("drm_dp_extcon");
>> +if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
>> +DRM_ERROR("Failed to create workqueue\n");
>> +dp_extcon_unregister(dp_usbpd);
>> +return -EPERM;
>> +}
>> +
>> +INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
>> +return ret;
>> +}
>> +
>> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +if (!dp_usbpd) {
>> +DRM_ERROR("Invalid input\n");
>> +return;
>> +}
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +devm_extcon_unregister_notifier(extcon_priv->dev,
>> extcon_priv->extcon,
>> +    EXTCON_DISP_DP,
>> +    &extcon_priv->extcon_nb);
>> +
>> +if (extcon_priv->extcon_wq)
>> +destroy_workqueue(extcon_priv->extcon_wq);
>> +
>> +return;
>> +}
>> +
>> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
>> *cb)
>> +{
>> +int rc = 0;
>> +struct dp_extcon_private *dp_extcon;
>> +struct dp_usbpd *dp_usbpd;
>> +
>> +if (!cb) {
>> +DRM_ERROR("invalid cb data\n");
>> +rc = -EINVAL;
>> +return ERR_PTR(rc);
>> +}
>> +
>> +dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
>> +if (!dp_extcon) {
>> +rc = -ENOMEM;
>> +return ERR_PTR(rc);
>> +}
>> +
>> +dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
>> +if (!dp_extcon->extcon) {
>> +DRM_ERROR("invalid extcon data\n");
>> +rc = -EINVAL;
>> +devm_kfree(dev, dp_extcon);
>> +return ERR_PTR(rc);
>> +        }
>> +
>> +dp_extcon->dev = dev;
>> +dp_extcon->dp_cb = cb;
>> +
>> +dp_extcon->dp_usbpd.connect = dp_extcon_connect;
>> +dp_usbpd = &dp_extcon->dp_usbpd;
>> +
>> +return dp_usbpd;
>> +}
>> +
>> +void dp_extcon_put(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon;
>> +
>> +if (!dp_usbpd)
>> +return;
>> +
>> +extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
>> +
>> +devm_kfree(extcon->dev, extcon);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h
>> b/drivers/gpu/drm/msm/dp/dp_extcon.h
>> new file mode 100644
>> index 0000000..c6c3051
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
>> @@ -0,0 +1,84 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_EXTCON_H_
>> +#define _DP_EXTCON_H_
>> +
>> +//#include <linux/usb/usbpd.h>
>> +
>> +#include <linux/types.h>
>> +#include <linux/device.h>
>> +
>> +enum plug_orientation {
>> +ORIENTATION_NONE,
>> +ORIENTATION_CC1,
>> +ORIENTATION_CC2,
>> +};
>> +
>> +/**
>> + * struct dp_usbpd - DisplayPort status
>> + *
>> + * @orientation: plug orientation configuration
>> + * @low_pow_st: low power state
>> + * @adaptor_dp_en: adaptor functionality enabled
>> + * @multi_func: multi-function preferred
>> + * @usb_config_req: request to switch to usb
>> + * @exit_dp_mode: request exit from displayport mode
>> + * @hpd_high: Hot Plug Detect signal is high.
>> + * @hpd_irq: Change in the status since last message
>> + * @alt_mode_cfg_done: bool to specify alt mode status
>> + * @debug_en: bool to specify debug mode
>> + * @connect: simulate disconnect or connect for debug mode
>> + */
>> +struct dp_usbpd {
>> +enum plug_orientation orientation;
>> +bool low_pow_st;
>> +bool adaptor_dp_en;
>> +bool multi_func;
>> +bool usb_config_req;
>> +bool exit_dp_mode;
>> +bool hpd_high;
>> +bool hpd_irq;
>> +bool alt_mode_cfg_done;
>> +bool debug_en;
>> +
>> +int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
>> +};
>> +
>> +/**
>> + * struct dp_usbpd_cb - callback functions provided by the client
>> + *
>> + * @configure: called by usbpd module when PD communication has
>> + * been completed and the usb peripheral has been configured on
>> + * dp mode.
>> + * @disconnect: notify the cable disconnect issued by usb.
>> + * @attention: notify any attention message issued by usb.
>> + */
>> +struct dp_usbpd_cb {
>> +int (*configure)(struct device *dev);
>> +int (*disconnect)(struct device *dev);
>> +int (*attention)(struct device *dev);
>> +};
>> +
>> +/**
>> + * dp_extcon_get() - setup usbpd module
>> + *
>> + * @dev: device instance of the caller
>> + * @cb: struct containing callback function pointers.
>> + *
>> + * This function allows the client to initialize the usbpd
>> + * module. The module will communicate with usb driver and
>> + * handles the power delivery (PD) communication with the
>> + * sink/usb device. This module will notify the client using
>> + * the callback functions about the connection and status.
>> + */
>> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
>> *cb);
>> +
>> +void dp_extcon_put(struct dp_usbpd *pd);
>> +
>> +int dp_extcon_register(struct dp_usbpd *dp_usbpd);
>> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
>> +
>> +#endif /* _DP_EXTCON_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> new file mode 100644
>> index 0000000..9f5b7bc8
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -0,0 +1,1185 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include "dp_link.h"
>> +#include "dp_panel.h"
>> +
>> +#define DP_TEST_REQUEST_MASK0x7F
>> +
>> +enum audio_sample_rate {
>> +AUDIO_SAMPLE_RATE_32_KHZ= 0x00,
>> +AUDIO_SAMPLE_RATE_44_1_KHZ= 0x01,
>> +AUDIO_SAMPLE_RATE_48_KHZ= 0x02,
>> +AUDIO_SAMPLE_RATE_88_2_KHZ= 0x03,
>> +AUDIO_SAMPLE_RATE_96_KHZ= 0x04,
>> +AUDIO_SAMPLE_RATE_176_4_KHZ= 0x05,
>> +AUDIO_SAMPLE_RATE_192_KHZ= 0x06,
>> +};
>> +
>> +enum audio_pattern_type {
>> +AUDIO_TEST_PATTERN_OPERATOR_DEFINED= 0x00,
>> +AUDIO_TEST_PATTERN_SAWTOOTH= 0x01,
>> +};
>> +
>> +struct dp_link_request {
>> +u32 test_requested;
>> +u32 test_link_rate;
>> +u32 test_lane_count;
>> +};
>> +
>> +struct dp_link_private {
>> +u32 prev_sink_count;
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_link dp_link;
>> +
>> +struct dp_link_request request;
>> +struct mutex test_response_mutex;
>> +struct mutex psm_mutex;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +};
>> +
>> +static int dp_link_get_period(struct dp_link_private *link, int const
>> addr)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +u32 const max_audio_period = 0xA;
>> +
>> +/* TEST_AUDIO_PERIOD_CH_XX */
>> +if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
>> +DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +/* Period - Bits 3:0 */
>> +data = data & 0xF;
>> +if ((int)data > max_audio_period) {
>> +DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +ret = data;
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_channel_period(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +struct dp_link_test_audio *req = &link->dp_link.test_audio;
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_1 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_2 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
>> +
>> +/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_3 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_4 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_5 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_6 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_7 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_8 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_pattern_type(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +int const max_audio_pattern_type = 0x1;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
>> +DP_TEST_AUDIO_PATTERN_TYPE, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Audio Pattern Type - Bits 7:0 */
>> +if ((int)data > max_audio_pattern_type) {
>> +DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +link->dp_link.test_audio.test_audio_pattern_type = data;
>> +DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_mode(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +int const max_audio_sampling_rate = 0x6;
>> +int const max_audio_channel_count = 0x8;
>> +int sampling_rate = 0x0;
>> +int channel_count = 0x0;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE,
>> &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Sampling Rate - Bits 3:0 */
>> +sampling_rate = data & 0xF;
>> +if (sampling_rate > max_audio_sampling_rate) {
>> +DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
>> +sampling_rate, max_audio_sampling_rate);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +/* Channel Count - Bits 7:4 */
>> +channel_count = ((data & 0xF0) >> 4) + 1;
>> +if (channel_count > max_audio_channel_count) {
>> +DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
>> +channel_count, max_audio_channel_count);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
>> +link->dp_link.test_audio.test_audio_channel_count = channel_count;
>> +DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
>> +sampling_rate, channel_count);
>> +exit:
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_parse_audio_pattern_params() - parses audio pattern parameters
>> from DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the audio link pattern
>> parameters.
>> + */
>> +static int dp_link_parse_audio_pattern_params(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +
>> +ret = dp_link_parse_audio_mode(link);
>> +if (ret)
>> +goto exit;
>> +
>> +ret = dp_link_parse_audio_pattern_type(link);
>> +if (ret)
>> +goto exit;
>> +
>> +ret = dp_link_parse_audio_channel_period(link);
>> +
>> +exit:
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_is_video_pattern_valid() - validates the video pattern
>> + * @pattern: video pattern requested by the sink
>> + *
>> + * Returns true if the requested video pattern is supported.
>> + */
>> +static bool dp_link_is_video_pattern_valid(u32 pattern)
>> +{
>> +switch (pattern) {
>> +case DP_NO_TEST_PATTERN:
>> +case DP_COLOR_RAMP:
>> +case DP_BLACK_AND_WHITE_VERTICAL_LINES:
>> +case DP_COLOR_SQUARE:
>> +return true;
>> +default:
>> +return false;
>> +}
>> +}
>> +
>> +/**
>> + * dp_link_is_bit_depth_valid() - validates the bit depth requested
>> + * @bit_depth: bit depth requested by the sink
>> + *
>> + * Returns true if the requested bit depth is supported.
>> + */
>> +static bool dp_link_is_bit_depth_valid(u32 tbd)
>> +{
>> +/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
>> +switch (tbd) {
>> +case DP_TEST_BIT_DEPTH_6:
>> +case DP_TEST_BIT_DEPTH_8:
>> +case DP_TEST_BIT_DEPTH_10:
>> +return true;
>> +default:
>> +return false;
>> +}
>> +}
>> +
>> +static int dp_link_parse_timing_params1(struct dp_link_private *link,
>> +int addr, int len, u32 *val)
>> +{
>> +u8 bp[2];
>> +int rlen;
>> +
>> +if (len != 2)
>> +return -EINVAL;
>> +
>> +/* Read the requested video link pattern (Byte 0x221). */
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
>> +if (rlen < len) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +
>> +*val = bp[1] | (bp[0] << 8);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_link_parse_timing_params2(struct dp_link_private *link,
>> +int addr, int len,
>> +u32 *val1, u32 *val2)
>> +{
>> +u8 bp[2];
>> +int rlen;
>> +
>> +if (len != 2)
>> +return -EINVAL;
>> +
>> +/* Read the requested video link pattern (Byte 0x221). */
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
>> +if (rlen < len) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +
>> +*val1 = (bp[0] & BIT(7)) >> 7;
>> +*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_link_parse_timing_params3(struct dp_link_private *link,
>> +int addr, u32 *val)
>> +{
>> +u8 bp;
>> +u32 len = 1;
>> +int rlen;
>> +
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
>> +if (rlen < 1) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +*val = bp;
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_parse_video_pattern_params() - parses video pattern parameters
>> from DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the video link pattern and the
>> link
>> + * bit depth requested by the sink and, and if the values parsed are
>> valid.
>> + */
>> +static int dp_link_parse_video_pattern_params(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +ssize_t rlen;
>> +u8 bp;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!dp_link_is_video_pattern_valid(bp)) {
>> +DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +link->dp_link.test_video.test_video_pattern = bp;
>> +
>> +/* Read the requested color bit depth and dynamic range (Byte 0x232)
>> */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Dynamic Range */
>> +link->dp_link.test_video.test_dyn_range = (bp &
>> DP_TEST_DYNAMIC_RANGE_CEA);
>> +
>> +/* Color bit depth */
>> +bp &= DP_TEST_BIT_DEPTH_MASK;
>> +if (!dp_link_is_bit_depth_valid(bp)) {
>> +DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +link->dp_link.test_video.test_bit_depth = bp;
>> +
>> +/* resolution timing params */
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
>> +&link->dp_link.test_video.test_h_total);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
>> +&link->dp_link.test_video.test_v_total);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
>> +&link->dp_link.test_video.test_h_start);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
>> +&link->dp_link.test_video.test_v_start);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
>> +&link->dp_link.test_video.test_hsync_pol,
>> +&link->dp_link.test_video.test_hsync_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
>> +&link->dp_link.test_video.test_vsync_pol,
>> +&link->dp_link.test_video.test_vsync_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
>> +&link->dp_link.test_video.test_h_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
>> +&link->dp_link.test_video.test_v_height);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
>> +&link->dp_link.test_video.test_rr_d);
>> +link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params3(link,
>> DP_TEST_REFRESH_RATE_NUMERATOR,
>> +&link->dp_link.test_video.test_rr_n);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_rr_n
>> (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
>> +return ret;
>> +}
>> +
>> +DRM_DEBUG_DP("link video pattern = 0x%x\n" \
>> +"link dynamic range = 0x%x\n" \
>> +"link bit depth = 0x%x\n" \
>> +"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
>> +"TEST_H_START = %d, TEST_V_START = %d\n" \
>> +"TEST_HSYNC_POL = %d\n" \
>> +"TEST_HSYNC_WIDTH = %d\n" \
>> +"TEST_VSYNC_POL = %d\n" \
>> +"TEST_VSYNC_WIDTH = %d\n" \
>> +"TEST_H_WIDTH = %d\n" \
>> +"TEST_V_HEIGHT = %d\n" \
>> +"TEST_REFRESH_DENOMINATOR = %d\n" \
>> + "TEST_REFRESH_NUMERATOR = %d\n",
>> +link->dp_link.test_video.test_video_pattern,
>> +link->dp_link.test_video.test_dyn_range,
>> +link->dp_link.test_video.test_bit_depth,
>> +link->dp_link.test_video.test_h_total,
>> +link->dp_link.test_video.test_v_total,
>> +link->dp_link.test_video.test_h_start,
>> +link->dp_link.test_video.test_v_start,
>> +link->dp_link.test_video.test_hsync_pol,
>> +link->dp_link.test_video.test_hsync_width,
>> +link->dp_link.test_video.test_vsync_pol,
>> +link->dp_link.test_video.test_vsync_width,
>> +link->dp_link.test_video.test_h_width,
>> +link->dp_link.test_video.test_v_height,
>> +link->dp_link.test_video.test_rr_d,
>> +link->dp_link.test_video.test_rr_n);
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_parse_link_training_params() - parses link training
>> parameters from
>> + * DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the link rate (Byte 0x219) and
>> lane
>> + * count (Byte 0x220), and if these values parse are valid.
>> + */
>> +static int dp_link_parse_link_training_params(struct dp_link_private
>> *link)
>> +{
>> +u8 bp;
>> +ssize_t rlen;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,&bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!is_link_rate_valid(bp)) {
>> +DRM_ERROR("invalid link rate = 0x%x\n", bp);
>> +return -EINVAL;
>> +}
>> +
>> +link->request.test_link_rate = bp;
>> +DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT,
>> &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +bp &= DP_MAX_LANE_COUNT_MASK;
>> +
>> +if (!is_lane_count_valid(bp)) {
>> +DRM_ERROR("invalid lane count = 0x%x\n", bp);
>> +return -EINVAL;
>> +}
>> +
>> +link->request.test_lane_count = bp;
>> +DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_parse_phy_test_params() - parses the phy link parameters
>> + * @link: Display Port Driver data
>> + *
>> + * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is
>> being
>> + * requested.
>> + */
>> +static int dp_link_parse_phy_test_params(struct dp_link_private 
>> *link)
>> +{
>> +u8 data;
>> +ssize_t rlen;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN,
>> &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +link->dp_link.phy_params.phy_test_pattern_sel = data;
>> +
>> +DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
>> +
>> +switch (data) {
>> +case DP_LINK_QUAL_PATTERN_DISABLE:
>> +case DP_LINK_QUAL_PATTERN_D10_2:
>> +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
>> +case DP_LINK_QUAL_PATTERN_PRBS7:
>> +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
>> +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
>> +return 0;
>> +default:
>> +return -EINVAL;
>> +}
>> +}
>> +
>> +/**
>> + * dp_link_is_video_audio_test_requested() - checks for audio/video
>> link request
>> + * @link: link requested by the sink
>> + *
>> + * Returns true if the requested link is a permitted audio/video 
>> link.
>> + */
>> +static bool dp_link_is_video_audio_test_requested(u32 link)
>> +{
>> +u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
>> +DP_TEST_LINK_AUDIO_PATTERN |
>> +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
>> +
>> +return ((link & video_audio_test) &&
>> +!(link & ~video_audio_test));
>> +}
>> +
>> +/**
>> + * dp_link_parse_request() - parses link request parameters from sink
>> + * @link: Display Port Driver data
>> + *
>> + * Parses the DPCD to check if an automated link is requested (Byte
>> 0x201),
>> + * and what type of link automation is being requested (Byte 0x218).
>> + */
>> +static int dp_link_parse_request(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +
>> +/**
>> + * Read the device service IRQ vector (Byte 0x201) to determine
>> + * whether an automated link has been requested by the sink.
>> + */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
>> +DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
>> +
>> +if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
>> +DRM_DEBUG_DP("no test requested\n");
>> +return 0;
>> +}
>> +
>> +/**
>> + * Read the link request byte (Byte 0x218) to determine what type
>> + * of automated link has been requested by the sink.
>> + */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
>> +DRM_DEBUG_DP("link 0x%x not supported\n", data);
>> +goto end;
>> +}
>> +
>> +DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
>> +link->request.test_requested = data;
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +ret = dp_link_parse_phy_test_params(link);
>> +if (ret)
>> +goto end;
>> +ret = dp_link_parse_link_training_params(link);
>> +if (ret)
>> +goto end;
>> +}
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
>> +ret = dp_link_parse_link_training_params(link);
>> +if (ret)
>> +goto end;
>> +}
>> +
>> +if (dp_link_is_video_audio_test_requested(
>> +link->request.test_requested)) {
>> +ret = dp_link_parse_video_pattern_params(link);
>> +if (ret)
>> +goto end;
>> +
>> +ret = dp_link_parse_audio_pattern_params(link);
>> +}
>> +end:
>> +/*
>> + * Send a DP_TEST_ACK if all link parameters are valid, otherwise
>> send
>> + * a DP_TEST_NAK.
>> + */
>> +if (ret) {
>> +link->dp_link.test_response = DP_TEST_NAK;
>> +} else {
>> +if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
>> +link->dp_link.test_response = DP_TEST_ACK;
>> +else
>> +link->dp_link.test_response =
>> +DP_TEST_EDID_CHECKSUM_WRITE;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_parse_sink_count() - parses the sink count
>> + *
>> + * Parses the DPCD to check if there is an update to the sink count
>> + * (Byte 0x200), and whether all the sink devices connected have
>> Content
>> + * Protection enabled.
>> + */
>> +static int dp_link_parse_sink_count(struct dp_link *dp_link)
>> +{
>> +ssize_t rlen;
>> +bool cp_ready;
>> +
>> +struct dp_link_private *link = container_of(dp_link,
>> +struct dp_link_private, dp_link);
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
>> + &link->dp_link.sink_count);
>> +if (rlen < 0) {
>> +DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
>> +
>> +link->dp_link.sink_count =
>> +DP_GET_SINK_COUNT(link->dp_link.sink_count);
>> +
>> +DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
>> +link->dp_link.sink_count, cp_ready);
>> +return 0;
>> +}
>> +
>> +static void dp_link_parse_sink_status_field(struct dp_link_private
>> *link)
>> +{
>> +int len = 0;
>> +
>> +link->prev_sink_count = link->dp_link.sink_count;
>> +dp_link_parse_sink_count(&link->dp_link);
>> +
>> +len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
>> +link->link_status);
>> +if (len < DP_LINK_STATUS_SIZE)
>> +DRM_ERROR("DP link status read failed\n");
>> +dp_link_parse_request(link);
>> +}
>> +
>> +/**
>> + * dp_link_process_link_training_request() - processes new training
>> requests
>> + * @link: Display Port link data
>> + *
>> + * This function will handle new link training requests that are
>> initiated by
>> + * the sink. In particular, it will update the requested lane count
>> and link
>> + * link rate, and then trigger the link retraining procedure.
>> + *
>> + * The function will return 0 if a link training request has been
>> processed,
>> + * otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_link_training_request(struct
>> dp_link_private *link)
>> +{
>> +if (link->request.test_requested != DP_TEST_LINK_TRAINING)
>> +return -EINVAL;
>> +
>> +DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
>> +DP_TEST_LINK_TRAINING,
>> +link->request.test_link_rate,
>> +link->request.test_lane_count);
>> +
>> +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
>> +link->dp_link.link_params.rate = link->request.test_link_rate;
>> +
>> +return 0;
>> +}
>> +
>> +bool dp_link_send_test_response(struct dp_link *dp_link)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return false;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->test_response_mutex);
>> +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
>> +dp_link->test_response);
>> +mutex_unlock(&link->test_response_mutex);
>> +
>> +return ret == 1;
>> +}
>> +
>> +int dp_link_psm_config(struct dp_link *dp_link,
>> +      struct drm_dp_link *link_info, bool enable)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->psm_mutex);
>> +if (enable)
>> +ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
>> +else
>> +ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
>> +
>> +if (ret)
>> +DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" :
>> "exit");
>> +else
>> +dp_link->psm_enabled = enable;
>> +
>> +mutex_unlock(&link->psm_mutex);
>> +return ret;
>> +}
>> +
>> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return false;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM,
>> checksum);
>> +return ret == 1;
>> +}
>> +
>> +static int dp_link_parse_vx_px(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +
>> +DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
>> +drm_dp_get_adjust_request_voltage(link->link_status, 0),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 1),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 2),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 3));
>> +
>> +DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
>> +
>> +/**
>> + * Update the voltage and pre-emphasis levels as per DPCD request
>> + * vector.
>> + */
>> +DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
>> +link->dp_link.phy_params.v_level,
>> +link->dp_link.phy_params.p_level);
>> +link->dp_link.phy_params.v_level =
>> +drm_dp_get_adjust_request_voltage(link->link_status, 0);
>> +link->dp_link.phy_params.p_level =
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
>> +DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
>> +link->dp_link.phy_params.v_level,
>> +link->dp_link.phy_params.p_level);
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_process_phy_test_pattern_request() - process new phy link
>> requests
>> + * @link: Display Port Driver data
>> + *
>> + * This function will handle new phy link pattern requests that are
>> initiated
>> + * by the sink. The function will return 0 if a phy link pattern has
>> been
>> + * processed, otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_phy_test_pattern_request(
>> +struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +
>> +if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN))
>> {
>> +DRM_DEBUG_DP("no phy test\n");
>> +return -EINVAL;
>> +}
>> +
>> +if (!is_link_rate_valid(link->request.test_link_rate) ||
>> +!is_lane_count_valid(link->request.test_lane_count)) {
>> +DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
>> +link->request.test_link_rate, link->request.test_lane_count);
>> +return -EINVAL;
>> +}
>> +
>> +DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
>> +link->dp_link.link_params.rate,
>> +link->dp_link.link_params.num_lanes);
>> +
>> +DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
>> +link->request.test_link_rate, link->request.test_lane_count);
>> +
>> +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
>> +link->dp_link.link_params.rate = link->request.test_link_rate;
>> +
>> +ret = dp_link_parse_vx_px(link);
>> +if (ret)
>> +  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
>> +
>> +return ret;
>> +}
>> +
>> +static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE],
>> int r)
>> +{
>> +return link_status[r - DP_LANE0_1_STATUS];
>> +}
>> +
>> +/**
>> + * dp_link_process_link_status_update() - processes link status
>> updates
>> + * @link: Display Port link module data
>> + *
>> + * This function will check for changes in the link status, e.g. 
>> clock
>> + * recovery done on all lanes, and trigger link training if there is 
>> a
>> + * failure/error on the link.
>> + *
>> + * The function will return 0 if the a link status update has been
>> processed,
>> + * otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_link_status_update(struct dp_link_private
>> *link)
>> +{
>> +if (!(get_link_status(link->link_status,
>> DP_LANE_ALIGN_STATUS_UPDATED) &
>> +DP_LINK_STATUS_UPDATED) ||
>> +(drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes) &&
>> +drm_dp_channel_eq_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes)))
>> +return -EINVAL;
>> +
>> +DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
>> +drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes),
>> +drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes));
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_link_process_downstream_port_status_change() - process port
>> status changes
>> + * @link: Display Port Driver data
>> + *
>> + * This function will handle downstream port updates that are
>> initiated by
>> + * the sink. If the downstream port status has changed, the EDID is
>> read via
>> + * AUX.
>> + *
>> + * The function will return 0 if a downstream port update has been
>> + * processed, otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_ds_port_status_change(struct
>> dp_link_private *link)
>> +{
>> +if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED)
>> &
>> +DP_DOWNSTREAM_PORT_STATUS_CHANGED)
>> +goto reset;
>> +
>> +if (link->prev_sink_count == link->dp_link.sink_count)
>> +return -EINVAL;
>> +
>> +reset:
>> +/* reset prev_sink_count */
>> +link->prev_sink_count = link->dp_link.sink_count;
>> +
>> +return 0;
>> +}
>> +
>> +static bool dp_link_is_video_pattern_requested(struct dp_link_private
>> *link)
>> +{
>> +return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
>> +&& !(link->request.test_requested &
>> +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
>> +}
>> +
>> +static bool dp_link_is_audio_pattern_requested(struct dp_link_private
>> *link)
>> +{
>> +return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
>> +}
>> +
>> +static void dp_link_reset_data(struct dp_link_private *link)
>> +{
>> +link->request = (const struct dp_link_request){ 0 };
>> +link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
>> +link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
>> +link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
>> +link->dp_link.phy_params.phy_test_pattern_sel = 0;
>> +link->dp_link.sink_request = 0;
>> +link->dp_link.test_response = 0;
>> +}
>> +
>> +/**
>> + * dp_link_process_request() - handle HPD IRQ transition to HIGH
>> + * @link: pointer to link module data
>> + *
>> + * This function will handle the HPD IRQ state transitions from LOW 
>> to
>> HIGH
>> + * (including cases when there are back to back HPD IRQ HIGH)
>> indicating
>> + * the start of a new link training request or sink status update.
>> + */
>> +int dp_link_process_request(struct dp_link *dp_link)
>> +{
>> +int ret = 0;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->test_response_mutex);
>> +dp_link_reset_data(link);
>> +
>> +dp_link_parse_sink_status_field(link);
>> +mutex_unlock(&link->test_response_mutex);
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>> +dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_ds_port_status_change(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_link_training_request(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_TEST_LINK_TRAINING;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_phy_test_pattern_request(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_link_status_update(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
>> +return ret;
>> +}
>> +
>> +if (dp_link_is_video_pattern_requested(link)) {
>> +dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
>> +return -EINVAL;
>> +}
>> +
>> +if (dp_link_is_audio_pattern_requested(link)) {
>> +dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
>> +return -EINVAL;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>> +{
>> +u32 cc;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +/*
>> + * Unless a video pattern CTS test is ongoing, use RGB_VESA
>> + * Only RGB_VESA and RGB_CEA supported for now
>> + */
>> +if (dp_link_is_video_pattern_requested(link))
>> +cc = link->dp_link.test_video.test_dyn_range;
>> +else
>> +cc = DP_TEST_DYNAMIC_RANGE_VESA;
>> +
>> +return cc;
>> +}
>> +
>> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
>> +{
>> +int i;
>> +int v_max = 0, p_max = 0;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +/* use the max level across lanes */
>> +for (i = 0; i < dp_link->link_params.num_lanes; i++) {
>> +u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
>> +u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
>> +DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
>> +i, data_v, data_p);
>> +if (v_max < data_v)
>> +v_max = data_v;
>> +if (p_max < data_p)
>> +p_max = data_p;
>> +}
>> +
>> +dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
>> +dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
>> +
>> +/**
>> + * Adjust the voltage swing and pre-emphasis level combination to
>> within
>> + * the allowable range.
>> + */
>> +if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
>> +dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
>> +dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
>> +}
>> +
>> +if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
>> +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
>> +dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
>> +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
>> +}
>> +
>> +if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
>> +&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
>> +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
>> +dp_link->phy_params.p_level,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_1);
>> +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
>> +}
>> +
>> +DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
>> +dp_link->phy_params.v_level, dp_link->phy_params.p_level);
>> +
>> +return 0;
>> +}
>> +
>> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
>> +{
>> +u32 tbd;
>> +
>> +/*
>> + * Few simplistic rules and assumptions made here:
>> + *    1. Test bit depth is bit depth per color component
>> + *    2. Assume 3 color components
>> + */
>> +switch (bpp) {
>> +case 18:
>> +tbd = DP_TEST_BIT_DEPTH_6;
>> +break;
>> +case 24:
>> +tbd = DP_TEST_BIT_DEPTH_8;
>> +break;
>> +case 30:
>> +tbd = DP_TEST_BIT_DEPTH_10;
>> +break;
>> +default:
>> +tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
>> +break;
>> +}
>> +
>> +if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
>> +tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
>> +
>> +return tbd;
>> +}
>> +
>> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
>> +{
>> +int rc = 0;
>> +struct dp_link_private *link;
>> +struct dp_link *dp_link;
>> +
>> +if (!dev || !aux) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
>> +if (!link) {
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +link->dev   = dev;
>> +link->aux   = aux;
>> +
>> +mutex_init(&link->test_response_mutex);
>> +mutex_init(&link->psm_mutex);
>> +dp_link = &link->dp_link;
>> +
>> +return dp_link;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_link_put(struct dp_link *dp_link)
>> +{
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link)
>> +return;
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +devm_kfree(link->dev, link);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h
>> b/drivers/gpu/drm/msm/dp/dp_link.h
>> new file mode 100644
>> index 0000000..607904b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
>> @@ -0,0 +1,132 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_LINK_H_
>> +#define _DP_LINK_H_
>> +
>> +#include "dp_aux.h"
>> +
>> +#define DS_PORT_STATUS_CHANGED 0x200
>> +#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>> +
>> +enum dp_link_voltage_level {
>> +DP_TRAIN_VOLTAGE_SWING_LVL_0= 0,
>> +DP_TRAIN_VOLTAGE_SWING_LVL_1= 1,
>> +DP_TRAIN_VOLTAGE_SWING_LVL_2= 2,
>> +DP_TRAIN_VOLTAGE_SWING_MAX= DP_TRAIN_VOLTAGE_SWING_LVL_2,
>> +};
>> +
>> +enum dp_link_preemaphasis_level {
>> +DP_TRAIN_PRE_EMPHASIS_LVL_0= 0,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_1= 1,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_2= 2,
>> +DP_TRAIN_PRE_EMPHASIS_MAX= DP_TRAIN_PRE_EMPHASIS_LVL_2,
>> +};
>> +
>> +struct dp_link_test_video {
>> +u32 test_video_pattern;
>> +u32 test_bit_depth;
>> +u32 test_dyn_range;
>> +u32 test_h_total;
>> +u32 test_v_total;
>> +u32 test_h_start;
>> +u32 test_v_start;
>> +u32 test_hsync_pol;
>> +u32 test_hsync_width;
>> +u32 test_vsync_pol;
>> +u32 test_vsync_width;
>> +u32 test_h_width;
>> +u32 test_v_height;
>> +u32 test_rr_d;
>> +u32 test_rr_n;
>> +};
>> +
>> +struct dp_link_test_audio {
>> +u32 test_audio_sampling_rate;
>> +u32 test_audio_channel_count;
>> +u32 test_audio_pattern_type;
>> +u32 test_audio_period_ch_1;
>> +u32 test_audio_period_ch_2;
>> +u32 test_audio_period_ch_3;
>> +u32 test_audio_period_ch_4;
>> +u32 test_audio_period_ch_5;
>> +u32 test_audio_period_ch_6;
>> +u32 test_audio_period_ch_7;
>> +u32 test_audio_period_ch_8;
>> +};
>> +
>> +struct dp_link_phy_params {
>> +u32 phy_test_pattern_sel;
>> +u8 v_level;
>> +u8 p_level;
>> +};
>> +
>> +struct dp_link {
>> +u32 sink_request;
>> +u32 test_response;
>> +bool psm_enabled;
>> +
>> +u8 sink_count;
>> +struct dp_link_test_video test_video;
>> +struct dp_link_test_audio test_audio;
>> +struct dp_link_phy_params phy_params;
>> +struct drm_dp_link link_params;
>> +};
>> +
>> +/**
>> + * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
>> + * @tbd: test bit depth
>> + *
>> + * Returns the bits per pixel (bpp) to be used corresponding to the
>> + * git bit depth value. This function assumes that bit depth has
>> + * already been validated.
>> + */
>> +static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
>> +{
>> +/*
>> + * Few simplistic rules and assumptions made here:
>> + *    1. Bit depth is per color component
>> + *    2. If bit depth is unknown return 0
>> + *    3. Assume 3 color components
>> + */
>> +switch (tbd) {
>> +case DP_TEST_BIT_DEPTH_6:
>> +return 18;
>> +case DP_TEST_BIT_DEPTH_8:
>> +return 24;
>> +case DP_TEST_BIT_DEPTH_10:
>> +return 30;
>> +case DP_TEST_BIT_DEPTH_UNKNOWN:
>> +default:
>> +return 0;
>> +}
>> +}
>> +
>> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
>> +int dp_link_process_request(struct dp_link *dp_link);
>> +int dp_link_get_colorimetry_config(struct dp_link *dp_link);
>> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
>> +bool dp_link_send_test_response(struct dp_link *dp_link);
>> +int dp_link_psm_config(struct dp_link *dp_link,
>> +struct drm_dp_link *link_info, bool enable);
>> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 
>> checksum);
>> +
>> +/**
>> + * dp_link_get() - get the functionalities of dp test module
>> + *
>> + *
>> + * return: a pointer to dp_link struct
>> + */
>> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
>> +
>> +/**
>> + * dp_link_put() - releases the dp test module's resources
>> + *
>> + * @dp_link: an instance of dp_link module
>> + *
>> + */
>> +void dp_link_put(struct dp_link *dp_link);
>> +
>> +#endif /* _DP_LINK_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c
>> b/drivers/gpu/drm/msm/dp/dp_panel.c
>> new file mode 100644
>> index 0000000..a3150f4
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
>> @@ -0,0 +1,450 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include "dp_panel.h"
>> +
>> +#include <drm/drm_connector.h>
>> +#include <drm/drm_edid.h>
>> +
>> +#define DP_MAX_DS_PORT_COUNT 1
>> +
>> +struct dp_panel_private {
>> +struct device *dev;
>> +struct dp_panel dp_panel;
>> +struct dp_aux *aux;
>> +struct dp_link *link;
>> +struct dp_catalog *catalog;
>> +bool panel_on;
>> +bool aux_cfg_update_done;
>> +};
>> +
>> +static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +size_t rlen;
>> +struct dp_panel_private *panel;
>> +struct drm_dp_link *link_info;
>> +u8 *dpcd, major = 0, minor = 0;
>> +u32 dfp_count = 0;
>> +
>> +dpcd = dp_panel->dpcd;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +link_info = &dp_panel->link_info;
>> +rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
>> +if (rc < 0) {
>> +DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
>> +return rc;
>> +}
>> +major = (link_info->revision >> 4) & 0x0f;
>> +minor = link_info->revision & 0x0f;
>> +DRM_DEBUG_DP("version: %d.%d\n", major, minor);
>> +DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
>> +DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
>> +
>> +rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
>> +dpcd, (DP_RECEIVER_CAP_SIZE + 1));
>> +if (rlen < 0) {
>> +DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
>> +return -EINVAL;
>> +}
>> +
>> +dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
>> +DP_DOWN_STREAM_PORT_COUNT;
>> +if (dfp_count > DP_MAX_DS_PORT_COUNT) {
>> +DRM_ERROR("DS port count %d greater that max (%d) supported\n",
>> +dfp_count, DP_MAX_DS_PORT_COUNT);
>> +return -EINVAL;
>> +}
>> +return rc;
>> +}
>> +
>> +static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
>> +u32 mode_edid_bpp, u32 mode_pclk_khz)
>> +{
>> +struct drm_dp_link *link_info;
>> +const u32 max_supported_bpp = 30, min_supported_bpp = 18;
>> +u32 bpp = 0, data_rate_khz = 0;
>> +
>> +bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
>> +
>> +link_info = &dp_panel->link_info;
>> +data_rate_khz = link_info->num_lanes * link_info->rate * 8;
>> +
>> +while (bpp > min_supported_bpp) {
>> +if (mode_pclk_khz * bpp <= data_rate_khz)
>> +break;
>> +bpp -= 6;
>> +}
>> +
>> +return bpp;
>> +}
>> +
>> +static void dp_panel_set_test_mode(struct dp_panel_private *panel,
>> +struct dp_display_mode *mode)
>> +{
>> +struct drm_display_mode *drm_mode = NULL;
>> +struct dp_link_test_video *test_info = NULL;
>> +
>> +drm_mode = &mode->drm_mode;
>> +test_info = &panel->link->test_video;
>> +
>> +drm_mode->hdisplay = test_info->test_h_width;
>> +drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total
>> -
>> +(test_info->test_h_start + test_info->test_h_width);
>> +drm_mode->hsync_end = drm_mode->hsync_start +
>> test_info->test_hsync_width;
>> +drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
>> +test_info->test_hsync_width;
>> +
>> +drm_mode->vdisplay = test_info->test_v_height;
>> +drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total
>> -
>> +(test_info->test_v_start + test_info->test_v_height);
>> +drm_mode->vsync_end = drm_mode->vsync_start +
>> test_info->test_vsync_width;
>> +drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
>> +test_info->test_vsync_width;
>> +
>> +drm_mode->vrefresh = test_info->test_rr_n;
>> +drm_mode->clock = test_info->test_h_total *
>> +test_info->test_v_total * drm_mode->vrefresh;
>> +
>> +drm_mode->type = 0x48;
>> +drm_mode_set_name(drm_mode);
>> +
>> +if (test_info->test_rr_d == 0)
>> +drm_mode->clock /= 1000;
>> +else
>> +drm_mode->clock /= 1001;
>> +
>> +if (test_info->test_h_width == 640)
>> +drm_mode->clock = 25170;
>> +}
>> +
>> +static int dp_panel_update_modes(struct drm_connector *connector,
>> +struct edid *edid)
>> +{
>> +int rc = 0;
>> +
>> +if (edid) {
>> +rc = drm_connector_update_edid_property(connector, edid);
>> +if (rc) {
>> +DRM_ERROR("failed to update edid property %d\n", rc);
>> +return rc;
>> +}
>> +rc = drm_add_edid_modes(connector, edid);
>> +DRM_DEBUG_DP("%s -", __func__);
>> +return rc;
>> +}
>> +
>> +rc = drm_connector_update_edid_property(connector, NULL);
>> +if (rc)
>> +DRM_ERROR("failed to update edid property %d\n", rc);
>> +
>> +return rc;
>> +}
>> +
>> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
>> +struct drm_connector *connector)
>> +{
>> +int rc = 0, bw_code;
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel || !connector) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +rc = dp_panel_read_dpcd(dp_panel);
>> +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
>> +if (rc || !is_link_rate_valid(bw_code) ||
>> +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
>> +(bw_code > dp_panel->max_bw_code)) {
>> +DRM_ERROR("read dpcd failed %d\n", rc);
>> +return rc;
>> +}
>> +rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
>> +      drm_dp_is_branch(dp_panel->dpcd));
>> +if (rc) {
>> +DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
>> +return rc;
>> +}
>> +
>> +
>> +kfree(dp_panel->edid);
>> +dp_panel->edid = drm_get_edid(connector,
>> +      &panel->aux->drm_aux->ddc);
>> +if (!dp_panel->edid) {
>> +DRM_ERROR("panel edid read failed\n");
>> +return -EINVAL;
>> +}
>> +
>> +if (panel->aux_cfg_update_done) {
>> +DRM_DEBUG_DP("read DPCD with updated AUX config\n");
>> +rc = dp_panel_read_dpcd(dp_panel);
>> +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
>> +if (rc || !is_link_rate_valid(bw_code) ||
>> +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
>> +(bw_code > dp_panel->max_bw_code)) {
>> +DRM_ERROR("read dpcd failed %d\n", rc);
>> +return rc;
>> +}
>> +panel->aux_cfg_update_done = false;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
>> +u32 mode_edid_bpp, u32 mode_pclk_khz)
>> +{
>> +struct dp_panel_private *panel;
>> +u32 bpp = mode_edid_bpp;
>> +
>> +if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
>> +DRM_ERROR("invalid input\n");
>> +return 0;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (dp_panel->video_test)
>> +bpp = dp_link_bit_depth_to_bpp(
>> +panel->link->test_video.test_bit_depth);
>> +else
>> +bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
>> +mode_pclk_khz);
>> +
>> +return bpp;
>> +}
>> +
>> +int dp_panel_get_modes(struct dp_panel *dp_panel,
>> +struct drm_connector *connector, struct dp_display_mode *mode)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (dp_panel->video_test) {
>> +dp_panel_set_test_mode(panel, mode);
>> +return 1;
>> +} else if (dp_panel->edid) {
>> +return dp_panel_update_modes(connector, dp_panel->edid);
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +u8 dp_panel_get_edid_checksum(struct edid *edid)
>> +{
>> +struct edid *last_block;
>> +u8 *raw_edid;
>> +bool is_edid_corrupt;
>> +
>> +if (!edid) {
>> +DRM_ERROR("invalid edid input\n");
>> +return 0;
>> +}
>> +
>> +raw_edid = (u8 *)edid;
>> +raw_edid += (edid->extensions * EDID_LENGTH);
>> +last_block = (struct edid *)raw_edid;
>> +
>> +/* block type extension */
>> +drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
>> +if (!is_edid_corrupt)
>> +return last_block->checksum;
>> +
>> +DRM_ERROR("Invalid block, no checksum\n");
>> +return 0;
>> +}
>> +
>> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
>> +u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
>> +
>> +dp_link_send_edid_checksum(panel->link, checksum);
>> +dp_link_send_test_response(panel->link);
>> +}
>> +}
>> +
>> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
>> +{
>> +struct dp_catalog *catalog;
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +catalog = panel->catalog;
>> +
>> +if (!panel->panel_on) {
>> +DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
>> +return;
>> +}
>> +
>> +if (!enable) {
>> +dp_catalog_panel_tpg_disable(catalog);
>> +return;
>> +}
>> +
>> +DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
>> +dp_catalog_panel_tpg_enable(catalog,
>> &panel->dp_panel.dp_mode.drm_mode);
>> +}
>> +
>> +int dp_panel_timing_cfg(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +u32 data, total_ver, total_hor;
>> +struct dp_catalog *catalog;
>> +struct dp_panel_private *panel;
>> +struct drm_display_mode *drm_mode;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +catalog = panel->catalog;
>> +drm_mode = &panel->dp_panel.dp_mode.drm_mode;
>> +
>> +DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
>> +drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
>> +drm_mode->hsync_start - drm_mode->hdisplay,
>> +drm_mode->hsync_end - drm_mode->hsync_start);
>> +
>> +DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
>> +drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
>> +drm_mode->vsync_start - drm_mode->vdisplay,
>> +drm_mode->vsync_end - drm_mode->vsync_start);
>> +
>> +total_hor = drm_mode->htotal;
>> +
>> +total_ver = drm_mode->vtotal;
>> +
>> +data = total_ver;
>> +data <<= 16;
>> +data |= total_hor;
>> +
>> +catalog->total = data;
>> +
>> +data = (drm_mode->vtotal - drm_mode->vsync_start);
>> +data <<= 16;
>> +data |= (drm_mode->htotal - drm_mode->hsync_start);
>> +
>> +catalog->sync_start = data;
>> +
>> +data = drm_mode->vsync_end - drm_mode->vsync_start;
>> +data <<= 16;
>> +data |= (panel->dp_panel.dp_mode.v_active_low << 31);
>> +data |= drm_mode->hsync_end - drm_mode->hsync_start;
>> +data |= (panel->dp_panel.dp_mode.h_active_low << 15);
>> +
>> +catalog->width_blanking = data;
>> +
>> +data = drm_mode->vdisplay;
>> +data <<= 16;
>> +data |= drm_mode->hdisplay;
>> +
>> +catalog->dp_active = data;
>> +
>> +dp_catalog_panel_timing_cfg(catalog);
>> +panel->panel_on = true;
>> +
>> +return rc;
>> +}
>> +
>> +int dp_panel_init_panel_info(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +struct drm_display_mode *drm_mode;
>> +
>> +drm_mode = &dp_panel->dp_mode.drm_mode;
>> +
>> +/*
>> + * print resolution info as this is a result
>> + * of user initiated action of cable connection
>> + */
>> +DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
>> +DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
>> +drm_mode->vdisplay, drm_mode->vrefresh);
>> +DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
>> +drm_mode->htotal - drm_mode->hsync_end,
>> +drm_mode->hsync_start - drm_mode->hdisplay,
>> +drm_mode->hsync_end - drm_mode->hsync_start);
>> +DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
>> +drm_mode->vtotal - drm_mode->vsync_end,
>> +drm_mode->vsync_start - drm_mode->vdisplay,
>> +drm_mode->vsync_end - drm_mode->vsync_start);
>> +DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
>> +DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
>> +
>> +dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32,
>> dp_panel->dp_mode.bpp, 30));
>> +DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
>> +
>> +return rc;
>> +}
>> +
>> +struct dp_panel *dp_panel_get(struct dp_panel_in *in)
>> +{
>> +int rc = 0;
>> +struct dp_panel_private *panel;
>> +struct dp_panel *dp_panel;
>> +
>> +if (!in->dev || !in->catalog || !in->aux || !in->link) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
>> +if (!panel) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +panel->dev = in->dev;
>> +panel->aux = in->aux;
>> +panel->catalog = in->catalog;
>> +panel->link = in->link;
>> +
>> +dp_panel = &panel->dp_panel;
>> +dp_panel->max_bw_code = DP_LINK_BW_8_1;
>> +panel->aux_cfg_update_done = false;
>> +
>> +return dp_panel;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_panel_put(struct dp_panel *dp_panel)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel)
>> +return;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +kfree(dp_panel->edid);
>> +dp_panel->edid = NULL;
>> +devm_kfree(panel->dev, panel);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h
>> b/drivers/gpu/drm/msm/dp/dp_panel.h
>> new file mode 100644
>> index 0000000..68c5650
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
>> @@ -0,0 +1,92 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_PANEL_H_
>> +#define _DP_PANEL_H_
>> +
>> +#include <drm/msm_drm.h>
>> +
>> +#include "dp_aux.h"
>> +#include "dp_link.h"
>> +#include "dp_extcon.h"
>> +
>> +struct edid;
>> +
>> +#define DP_MAX_DOWNSTREAM_PORTS 0x10
>> +
>> +struct dp_display_mode {
>> +struct drm_display_mode drm_mode;
>> +u32 capabilities;
>> +u32 bpp;
>> +u32 h_active_low;
>> +u32 v_active_low;
>> +};
>> +
>> +struct dp_panel_in {
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_link *link;
>> +struct dp_catalog *catalog;
>> +};
>> +
>> +struct dp_panel {
>> +/* dpcd raw data */
>> +u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
>> +
>> +struct drm_dp_link link_info;
>> +struct drm_dp_desc desc;
>> +struct edid *edid;
>> +struct drm_connector *connector;
>> +struct dp_display_mode dp_mode;
>> +bool video_test;
>> +
>> +u32 vic;
>> +u32 max_pclk_khz;
>> +
>> +u32 max_bw_code;
>> +};
>> +
>> +int dp_panel_init_panel_info(struct dp_panel *dp_panel);
>> +int dp_panel_deinit(struct dp_panel *dp_panel);
>> +int dp_panel_timing_cfg(struct dp_panel *dp_panel);
>> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
>> +struct drm_connector *connector);
>> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 
>> mode_max_bpp,
>> +u32 mode_pclk_khz);
>> +int dp_panel_get_modes(struct dp_panel *dp_panel,
>> +struct drm_connector *connector, struct dp_display_mode *mode);
>> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
>> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
>> +
>> +/**
>> + * is_link_rate_valid() - validates the link rate
>> + * @lane_rate: link rate requested by the sink
>> + *
>> + * Returns true if the requested link rate is supported.
>> + */
>> +static inline bool is_link_rate_valid(u32 bw_code)
>> +{
>> +return (bw_code == DP_LINK_BW_1_62 ||
>> +bw_code == DP_LINK_BW_2_7 ||
>> +bw_code == DP_LINK_BW_5_4 ||
>> +bw_code == DP_LINK_BW_8_1);
>> +}
>> +
>> +/**
>> + * dp_link_is_lane_count_valid() - validates the lane count
>> + * @lane_count: lane count requested by the sink
>> + *
>> + * Returns true if the requested lane count is supported.
>> + */
>> +static inline bool is_lane_count_valid(u32 lane_count)
>> +{
>> +return (lane_count == 1 ||
>> +lane_count == 2 ||
>> +lane_count == 4);
>> +}
>> +
>> +struct dp_panel *dp_panel_get(struct dp_panel_in *in);
>> +void dp_panel_put(struct dp_panel *dp_panel);
>> +#endif /* _DP_PANEL_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
>> b/drivers/gpu/drm/msm/dp/dp_parser.c
>> new file mode 100644
>> index 0000000..3fa2a1f
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
>> @@ -0,0 +1,496 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/of_gpio.h>
>> +
>> +#include "dp_parser.h"
>> +
>> +static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
>> +.num = 2,
>> +.regs = {
>> +{"vdda-1p2", 21800, 4 },/* 1.2 V */
>> +{"vdda-0p9", 36000, 32 },/* 0.9 V */
>> +},
>> +};
>> +
>> +static int msm_dss_ioremap_byname(struct platform_device *pdev,
>> +   struct dss_io_data *io_data, const char *name)
>> +{
>> +struct resource *res = NULL;
>> +
>> +if (!io_data) {
>> +DRM_ERROR("%pS->%s: invalid input\n",
>> +__builtin_return_address(0), __func__);
>> +return -EINVAL;
>> +}
>> +
>> +res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
>> +if (!res) {
>> +DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
>> +__builtin_return_address(0), __func__, name);
>> +return -ENODEV;
>> +}
>> +
>> +io_data->len = (u32)resource_size(res);
>> +io_data->base = ioremap(res->start, io_data->len);
>> +if (!io_data->base) {
>> +DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
>> +__builtin_return_address(0), __func__, name);
>> +return -EIO;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static void msm_dss_iounmap(struct dss_io_data *io_data)
>> +{
>> +if (!io_data) {
>> +DRM_ERROR("%pS->%s: invalid input\n",
>> +__builtin_return_address(0), __func__);
>> +return;
>> +}
>> +
>> +if (io_data->base) {
>> +iounmap(io_data->base);
>> +io_data->base = NULL;
>> +}
>> +io_data->len = 0;
>> +}
>> +
>> +static void dp_parser_unmap_io_resources(struct dp_parser *parser)
>> +{
>> +struct dp_io *io = &parser->io;
>> +
>> +msm_dss_iounmap(&io->dp_ahb);
>> +msm_dss_iounmap(&io->dp_aux);
>> +msm_dss_iounmap(&io->dp_link);
>> +msm_dss_iounmap(&io->dp_p0);
>> +msm_dss_iounmap(&io->phy_io);
>> +msm_dss_iounmap(&io->ln_tx0_io);
>> +msm_dss_iounmap(&io->ln_tx0_io);
>> +msm_dss_iounmap(&io->dp_pll_io);
>> +msm_dss_iounmap(&io->dp_cc_io);
>> +msm_dss_iounmap(&io->usb3_dp_com);
>> +msm_dss_iounmap(&io->qfprom_io);
>> +}
>> +
>> +static int dp_parser_ctrl_res(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +u32 index;
>> +struct platform_device *pdev = parser->pdev;
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +struct dp_io *io = &parser->io;
>> +
>> +rc = of_property_read_u32(of_node, "cell-index", &index);
>> +if (rc) {
>> +DRM_ERROR("cell-index not specified, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
>> +if (rc) {
>> +DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
>> +if (rc) {
>> +DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp MMSS_CC resources\n");
>> +goto err;
>> +}
>> +
>> +if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
>> +pr_warn("unable to remap dp qfprom resources\n");
>> +
>> +return 0;
>> +err:
>> +dp_parser_unmap_io_resources(parser);
>> +return rc;
>> +}
>> +
>> +static const char *dp_get_phy_aux_config_property(u32 cfg_type)
>> +{
>> +switch (cfg_type) {
>> +case PHY_AUX_CFG0:
>> +return "qcom,aux-cfg0-settings";
>> +case PHY_AUX_CFG1:
>> +return "qcom,aux-cfg1-settings";
>> +case PHY_AUX_CFG2:
>> +return "qcom,aux-cfg2-settings";
>> +case PHY_AUX_CFG3:
>> +return "qcom,aux-cfg3-settings";
>> +case PHY_AUX_CFG4:
>> +return "qcom,aux-cfg4-settings";
>> +case PHY_AUX_CFG5:
>> +return "qcom,aux-cfg5-settings";
>> +case PHY_AUX_CFG6:
>> +return "qcom,aux-cfg6-settings";
>> +case PHY_AUX_CFG7:
>> +return "qcom,aux-cfg7-settings";
>> +case PHY_AUX_CFG8:
>> +return "qcom,aux-cfg8-settings";
>> +case PHY_AUX_CFG9:
>> +return "qcom,aux-cfg9-settings";
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +static int dp_parser_aux(struct dp_parser *parser)
>> +{
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +int len = 0, i = 0, j = 0, config_count = 0;
>> +const char *data;
>> +
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +const char *property = dp_get_phy_aux_config_property(i);
>> +
>> +data = of_get_property(of_node, property, &len);
>> +if (!data) {
>> +DRM_ERROR("Unable to read %s\n", property);
>> +goto error;
>> +}
>> +
>> +config_count = len - 1;
>> +if (config_count < 1 || /* minimum config count = 1 */
>> +config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
>> +DRM_ERROR("Invalid config count (%d) configs for %s\n",
>> +config_count, property);
>> +goto error;
>> +}
>> +
>> +parser->aux_cfg[i].offset = data[0];
>> +parser->aux_cfg[i].cfg_cnt = config_count;
>> +DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
>> +property,
>> +parser->aux_cfg[i].offset,
>> +parser->aux_cfg[i].cfg_cnt);
>> +for (j = 1; j < len; j++) {
>> +parser->aux_cfg[i].lut[j - 1] = data[j];
>> +DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
>> +property,
>> +i,
>> +parser->aux_cfg[i].lut[j - 1]);
>> +}
>> +}
>> +return 0;
>> +
>> +error:
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
>> +}
>> +return -EINVAL;
>> +}
>> +
>> +static int dp_parser_misc(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +
>> +rc = of_property_read_u32(of_node,
>> +"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
>> +if (rc)
>> +parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_pinctrl(struct dp_parser *parser)
>> +{
>> +struct dp_pinctrl *pinctrl = &parser->pinctrl;
>> +
>> +pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
>> +
>> +if (IS_ERR_OR_NULL(pinctrl->pin)) {
>> +DRM_ERROR("failed to get pinctrl, rc=%d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->pin));
>> +return -EINVAL;
>> +}
>> +
>> +pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
>> +"mdss_dp_active");
>> +if (IS_ERR_OR_NULL(pinctrl->state_active)) {
>> +DRM_ERROR("failed to get pinctrl active state, %d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->state_active));
>> +return -EINVAL;
>> +}
>> +
>> +pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
>> +"mdss_dp_sleep");
>> +if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
>> +DRM_ERROR("failed to get pinctrl suspend state, %d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->state_suspend));
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_gpio(struct dp_parser *parser)
>> +{
>> +struct device *dev = &parser->pdev->dev;
>> +struct device_node *of_node = dev->of_node;
>> +
>> +parser->usbplug_cc_gpio = of_get_named_gpio(of_node,
>> "qcom,usbplug-cc-gpio", 0);
>> +if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
>> +DRM_ERROR("usbplug-cc-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio",
>> 0);
>> +if (!gpio_is_valid(parser->aux_en_gpio)) {
>> +DRM_ERROR("aux-en-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +parser->aux_sel_gpio = of_get_named_gpio(of_node,
>> "qcom,aux-sel-gpio", 0);
>> +if (!gpio_is_valid(parser->aux_sel_gpio)) {
>> +DRM_ERROR("aux-sel-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static inline bool dp_parser_check_prefix(const char *clk_prefix,
>> const char *clk_name)
>> +{
>> +return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
>> +}
>> +
>> +static int dp_parser_init_clk_data(struct dp_parser *parser)
>> +{
>> +int num_clk = 0, i = 0, rc = 0;
>> +int core_clk_count = 0, ctrl_clk_count = 0;
>> +const char *clk_name;
>> +struct device *dev = &parser->pdev->dev;
>> +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
>> +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +num_clk = of_property_count_strings(dev->of_node, "clock-names");
>> +if (num_clk <= 0) {
>> +DRM_ERROR("no clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +for (i = 0; i < num_clk; i++) {
>> +rc = of_property_read_string_index(dev->of_node,
>> +"clock-names", i, &clk_name);
>> +if (rc) {
>> +DRM_ERROR("error reading clock-names %d\n", rc);
>> +return rc;
>> +}
>> +
>> +if (dp_parser_check_prefix("core", clk_name))
>> +core_clk_count++;
>> +
>> +if (dp_parser_check_prefix("ctrl", clk_name))
>> +ctrl_clk_count++;
>> +}
>> +
>> +/* Initialize the CORE power module */
>> +if (core_clk_count == 0) {
>> +DRM_ERROR("no core clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +core_power->num_clk = core_clk_count;
>> +core_power->clk_config = devm_kzalloc(dev,
>> +sizeof(struct dss_clk) * core_power->num_clk,
>> +GFP_KERNEL);
>> +if (!core_power->clk_config) {
>> +return -EINVAL;
>> +}
>> +
>> +/* Initialize the CTRL power module */
>> +if (ctrl_clk_count == 0) {
>> +DRM_ERROR("no ctrl clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +ctrl_power->num_clk = ctrl_clk_count;
>> +ctrl_power->clk_config = devm_kzalloc(dev,
>> +sizeof(struct dss_clk) * ctrl_power->num_clk,
>> +GFP_KERNEL);
>> +if (!ctrl_power->clk_config) {
>> +ctrl_power->num_clk = 0;
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_clock(struct dp_parser *parser)
>> +{
>> +int rc = 0, i = 0;
>> +int num_clk = 0;
>> +int core_clk_index = 0, ctrl_clk_index = 0;
>> +int core_clk_count = 0, ctrl_clk_count = 0;
>> +const char *clk_name;
>> +struct device *dev = &parser->pdev->dev;
>> +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
>> +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +core_power = &parser->mp[DP_CORE_PM];
>> +ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +rc =  dp_parser_init_clk_data(parser);
>> +if (rc) {
>> +DRM_ERROR("failed to initialize power data %d\n", rc);
>> +return -EINVAL;
>> +}
>> +
>> +core_clk_count = core_power->num_clk;
>> +ctrl_clk_count = ctrl_power->num_clk;
>> +
>> +num_clk = core_clk_count + ctrl_clk_count;
>> +
>> +for (i = 0; i < num_clk; i++) {
>> +rc = of_property_read_string_index(dev->of_node, "clock-names",
>> +i, &clk_name);
>> +if (rc) {
>> + DRM_ERROR("error reading clock-names %d\n", rc);
>> +return rc;
>> +}
>> +if (dp_parser_check_prefix("core", clk_name) &&
>> +core_clk_index < core_clk_count) {
>> +struct dss_clk *clk =
>> +&core_power->clk_config[core_clk_index];
>> +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
>> +clk->type = DSS_CLK_AHB;
>> +core_clk_index++;
>> +} else if (dp_parser_check_prefix("ctrl", clk_name) &&
>> +   ctrl_clk_index < ctrl_clk_count) {
>> +struct dss_clk *clk =
>> +&ctrl_power->clk_config[ctrl_clk_index];
>> +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
>> +ctrl_clk_index++;
>> +
>> +if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
>> +  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
>> +clk->type = DSS_CLK_PCLK;
>> +else
>> +clk->type = DSS_CLK_AHB;
>> +}
>> +}
>> +
>> +DRM_DEBUG_DP("clock parsing successful\n");
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_parse(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +
>> +if (!parser) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +/* Default: We assume that PHY is shared between USB and DP (Combo
>> phy) */
>> +parser->combo_phy_en = true;
>> +
>> +rc = dp_parser_ctrl_res(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_aux(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_misc(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_clock(parser);
>> +if (rc)
>> +return rc;
>> +
>> +/* Map the corresponding regulator information according to
>> + * version. Currently, since we only have one supported platform,
>> + * mapping the regulator directly.
>> + */
>> +parser->regulator_cfg = &sdm845_dp_reg_cfg;
>> +
>> +rc = dp_parser_gpio(parser);
>> +if (rc) {
>> +DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is
>> disabled\n");
>> +parser->combo_phy_en = false;
>> +return rc;
>> +}
>> +
>> +rc = dp_parser_pinctrl(parser);
>> +return rc;
>> +}
>> +
>> +struct dp_parser *dp_parser_get(struct platform_device *pdev)
>> +{
>> +struct dp_parser *parser;
>> +
>> +parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
>> +if (!parser)
>> +return ERR_PTR(-ENOMEM);
>> +
>> +parser->parse = dp_parser_parse;
>> +parser->pdev = pdev;
>> +
>> +return parser;
>> +}
>> +
>> +void dp_parser_put(struct dp_parser *parser)
>> +{
>> +
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h
>> b/drivers/gpu/drm/msm/dp/dp_parser.h
>> new file mode 100644
>> index 0000000..b606b40
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
>> @@ -0,0 +1,222 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_PARSER_H_
>> +#define _DP_PARSER_H_
>> +
>> +#define DP_LABEL "MDSS DP DISPLAY"
>> +#define AUX_CFG_LEN10
>> +#define DP_MAX_PIXEL_CLK_KHZ675000
>> +
>> +enum dp_pm_type {
>> +DP_CORE_PM,
>> +DP_CTRL_PM,
>> +DP_PHY_PM,
>> +DP_MAX_PM
>> +};
>> +
>> +struct dss_io_data {
>> +u32 len;
>> +void __iomem *base;
>> +};
>> +
>> +static inline const char *dp_parser_pm_name(enum dp_pm_type module)
>> +{
>> +switch (module) {
>> +case DP_CORE_PM:return "DP_CORE_PM";
>> +case DP_CTRL_PM:return "DP_CTRL_PM";
>> +case DP_PHY_PM:return "DP_PHY_PM";
>> +default:return "???";
>> +}
>> +}
>> +
>> +/**
>> + * struct dp_display_data  - display related device tree data.
>> + *
>> + * @ctrl_node: referece to controller device
>> + * @phy_node:  reference to phy device
>> + * @is_active: is the controller currently active
>> + * @name: name of the display
>> + * @display_type: type of the display
>> + */
>> +struct dp_display_data {
>> +struct device_node *ctrl_node;
>> +struct device_node *phy_node;
>> +bool is_active;
>> +const char *name;
>> +const char *display_type;
>> +};
>> +
>> +/**
>> + * struct dp_ctrl_resource - controller's IO related data
>> + *
>> + * @dp_ahb: controller's ahb mapped memory address
>> + * @dp_aux: controller's aux mapped memory address
>> + * @dp_link: controller's link mapped memory address
>> + * @dp_p0: controller's p0 mapped memory address
>> + * @phy_io: phy's mapped memory address
>> + * @ln_tx0_io: USB-DP lane TX0's mapped memory address
>> + * @ln_tx1_io: USB-DP lane TX1's mapped memory address
>> + * @dp_cc_io: DP cc's mapped memory address
>> + * @qfprom_io: qfprom's mapped memory address
>> + * @dp_pll_io: DP PLL mapped memory address
>> + * @usb3_dp_com: USB3 DP PHY combo mapped memory address
>> + */
>> +struct dp_io {
>> +struct dss_io_data ctrl_io;
>> +struct dss_io_data dp_ahb;
>> +struct dss_io_data dp_aux;
>> +struct dss_io_data dp_link;
>> +struct dss_io_data dp_p0;
>> +struct dss_io_data phy_io;
>> +struct dss_io_data ln_tx0_io;
>> +struct dss_io_data ln_tx1_io;
>> +struct dss_io_data dp_cc_io;
>> +struct dss_io_data qfprom_io;
>> +struct dss_io_data dp_pll_io;
>> +struct dss_io_data usb3_dp_com;
>> +};
>> +
>> +/**
>> + * struct dp_pinctrl - DP's pin control
>> + *
>> + * @pin: pin-controller's instance
>> + * @state_active: active state pin control
>> + * @state_hpd_active: hpd active state pin control
>> + * @state_suspend: suspend state pin control
>> + */
>> +struct dp_pinctrl {
>> +struct pinctrl *pin;
>> +struct pinctrl_state *state_active;
>> +struct pinctrl_state *state_hpd_active;
>> +struct pinctrl_state *state_suspend;
>> +};
>> +
>> +#define DP_ENUM_STR(x)#x
>> +#define DP_AUX_CFG_MAX_VALUE_CNT 3
>> +/**
>> + * struct dp_aux_cfg - DP's AUX configuration settings
>> + *
>> + * @cfg_cnt: count of the configurable settings for the AUX register
>> + * @current_index: current index of the AUX config lut
>> + * @offset: register offset of the AUX config register
>> + * @lut: look up table for the AUX config values for this register
>> + */
>> +struct dp_aux_cfg {
>> +u32 cfg_cnt;
>> +u32 current_index;
>> +u32 offset;
>> +u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
>> +};
>> +
>> +/* PHY AUX config registers */
>> +enum dp_phy_aux_config_type {
>> +PHY_AUX_CFG0,
>> +PHY_AUX_CFG1,
>> +PHY_AUX_CFG2,
>> +PHY_AUX_CFG3,
>> +PHY_AUX_CFG4,
>> +PHY_AUX_CFG5,
>> +PHY_AUX_CFG6,
>> +PHY_AUX_CFG7,
>> +PHY_AUX_CFG8,
>> +PHY_AUX_CFG9,
>> +PHY_AUX_CFG_MAX,
>> +};
>> +
>> +#define DP_DEV_REGULATOR_MAX4
>> +
>> +/* Regulators for DP devices */
>> +struct dp_reg_entry {
>> +char name[32];
>> +int enable_load;
>> +int disable_load;
>> +};
>> +
>> +struct dp_regulator_cfg {
>> +int num;
>> +struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
>> +};
>> +
>> +
>> +static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
>> +{
>> +switch (cfg_type) {
>> +case PHY_AUX_CFG0:
>> +return DP_ENUM_STR(PHY_AUX_CFG0);
>> +case PHY_AUX_CFG1:
>> +return DP_ENUM_STR(PHY_AUX_CFG1);
>> +case PHY_AUX_CFG2:
>> +return DP_ENUM_STR(PHY_AUX_CFG2);
>> +case PHY_AUX_CFG3:
>> +return DP_ENUM_STR(PHY_AUX_CFG3);
>> +case PHY_AUX_CFG4:
>> +return DP_ENUM_STR(PHY_AUX_CFG4);
>> +case PHY_AUX_CFG5:
>> +return DP_ENUM_STR(PHY_AUX_CFG5);
>> +case PHY_AUX_CFG6:
>> +return DP_ENUM_STR(PHY_AUX_CFG6);
>> +case PHY_AUX_CFG7:
>> +return DP_ENUM_STR(PHY_AUX_CFG7);
>> +case PHY_AUX_CFG8:
>> +return DP_ENUM_STR(PHY_AUX_CFG8);
>> +case PHY_AUX_CFG9:
>> +return DP_ENUM_STR(PHY_AUX_CFG9);
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +/**
>> + * struct dp_parser - DP parser's data exposed to clients
>> + *
>> + * @pdev: platform data of the client
>> + * @mp: gpio, regulator and clock related data
>> + * @pinctrl: pin-control related data
>> + * @aux_en_gpio: GPIO to control AUX data when using combo PHY
>> + * @aux_sel_gpio: GPIO to control plug orientation when using combo
>> PHY
>> + * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
>> + * @combo_phy_en: Boolean to check whether combo PHY is used
>> + * @disp_data: controller's display related data
>> + * @parse: function to be called by client to parse device tree.
>> + */
>> +struct dp_parser {
>> +struct platform_device *pdev;
>> +struct dss_module_power mp[DP_MAX_PM];
>> +struct dp_pinctrl pinctrl;
>> +unsigned int aux_en_gpio;
>> +unsigned int aux_sel_gpio;
>> +unsigned int usbplug_cc_gpio;
>> +bool combo_phy_en;
>> +struct dp_io io;
>> +struct dp_display_data disp_data;
>> +const struct dp_regulator_cfg *regulator_cfg;
>> +u8 l_map[4];
>> +struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
>> +u32 max_pclk_khz;
>> +
>> +int (*parse)(struct dp_parser *parser);
>> +};
>> +
>> +/**
>> + * dp_parser_get() - get the DP's device tree parser module
>> + *
>> + * @pdev: platform data of the client
>> + * return: pointer to dp_parser structure.
>> + *
>> + * This function provides client capability to parse the
>> + * device tree and populate the data structures. The data
>> + * related to clock, regulators, pin-control and other
>> + * can be parsed using this module.
>> + */
>> +struct dp_parser *dp_parser_get(struct platform_device *pdev);
>> +
>> +/**
>> + * dp_parser_put() - cleans the dp_parser module
>> + *
>> + * @parser: pointer to the parser's data.
>> + */
>> +void dp_parser_put(struct dp_parser *parser);
>> +#endif
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c
>> b/drivers/gpu/drm/msm/dp/dp_power.c
>> new file mode 100644
>> index 0000000..3fa4c9b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
>> @@ -0,0 +1,558 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/clk.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/of_gpio.h>
>> +#include "dp_power.h"
>> +
>> +struct dp_power_private {
>> +struct dp_parser *parser;
>> +struct platform_device *pdev;
>> +struct clk *pixel_clk_rcg;
>> +struct clk *link_clk_src;
>> +struct clk *pixel_provider;
>> +struct clk *link_provider;
>> +struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
>> +
>> +struct dp_power dp_power;
>> +};
>> +
>> +static void dp_power_regulator_disable(struct dp_power_private 
>> *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +int num = power->parser->regulator_cfg->num;
>> +int i;
>> +
>> +DBG("");
>> +for (i = num - 1; i >= 0; i--)
>> +if (regs[i].disable_load >= 0)
>> +regulator_set_load(s[i].consumer,
>> +   regs[i].disable_load);
>> +
>> +regulator_bulk_disable(num, s);
>> +}
>> +
>> +static int dp_power_regulator_enable(struct dp_power_private *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +int num = power->parser->regulator_cfg->num;
>> +int ret, i;
>> +
>> +DBG("");
>> +for (i = 0; i < num; i++) {
>> +if (regs[i].enable_load >= 0) {
>> +ret = regulator_set_load(s[i].consumer,
>> + regs[i].enable_load);
>> +if (ret < 0) {
>> +pr_err("regulator %d set op mode failed, %d\n",
>> +i, ret);
>> +goto fail;
>> +}
>> +}
>> +}
>> +
>> +ret = regulator_bulk_enable(num, s);
>> +if (ret < 0) {
>> +pr_err("regulator enable failed, %d\n", ret);
>> +goto fail;
>> +}
>> +
>> +return 0;
>> +
>> +fail:
>> +for (i--; i >= 0; i--)
>> +regulator_set_load(s[i].consumer, regs[i].disable_load);
>> +return ret;
>> +}
>> +
>> +static int dp_power_regulator_init(struct dp_power_private *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +struct platform_device *pdev = power->pdev;
>> +int num = power->parser->regulator_cfg->num;
>> +int i, ret;
>> +
>> +for (i = 0; i < num; i++)
>> +s[i].supply = regs[i].name;
>> +
>> +ret = devm_regulator_bulk_get(&pdev->dev, num, s);
>> +if (ret < 0) {
>> +pr_err("%s: failed to init regulator, ret=%d\n",
>> +__func__, ret);
>> +return ret;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_pinctrl_set(struct dp_power_private *power, bool
>> active)
>> +{
>> +int rc = -EFAULT;
>> +struct pinctrl_state *pin_state;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return 0;
>> +
>> +pin_state = active ? parser->pinctrl.state_active
>> +: parser->pinctrl.state_suspend;
>> +
>> +rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
>> +if (rc) {
>> +DRM_ERROR("can not set %s pins\n",
>> +active ? "dp_active" : "dp_sleep");
>> +return rc;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_init(struct dp_power_private *power)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *core, *ctrl;
>> +struct device *dev = &power->pdev->dev;
>> +
>> +core = &power->parser->mp[DP_CORE_PM];
>> +ctrl = &power->parser->mp[DP_CTRL_PM];
>> +
>> +if (power->parser->pll && power->parser->pll->get_provider) {
>> +rc = power->parser->pll->get_provider(power->parser->pll,
>> +&power->link_provider, &power->pixel_provider);
>> +if (rc) {
>> +pr_info("%s: can't get provider from pll, don't set parent\n",
>> +__func__);
>> +return 0;
>> +}
>> +}
>> +
>> +rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to get %s clk. err=%d\n",
>> +dp_parser_pm_name(DP_CORE_PM), rc);
>> +return rc;
>> +}
>> +
>> +rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to get %s clk. err=%d\n",
>> +dp_parser_pm_name(DP_CTRL_PM), rc);
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return -ENODEV;
>> +}
>> +
>> +power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
>> +if (IS_ERR(power->pixel_clk_rcg)) {
>> +DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
>> +power->pixel_clk_rcg = NULL;
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return -ENODEV;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_deinit(struct dp_power_private *power)
>> +{
>> +struct dss_module_power *core, *ctrl;
>> +
>> +core = &power->parser->mp[DP_CORE_PM];
>> +ctrl = &power->parser->mp[DP_CTRL_PM];
>> +
>> +if (!core || !ctrl) {
>> +DRM_ERROR("invalid power_data\n");
>> +return -EINVAL;
>> +}
>> +
>> +msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_set_rate(struct dp_power_private *power,
>> +enum dp_pm_type module, bool enable)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *mp = &power->parser->mp[module];
>> +
>> +if (enable) {
>> +rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to set clks rate.\n");
>> +return rc;
>> +}
>> +}
>> +
>> +rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
>> +return rc;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +int dp_power_clk_enable(struct dp_power *dp_power,
>> +enum dp_pm_type pm_type, bool enable)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *mp;
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +mp = &power->parser->mp[pm_type];
>> +
>> +if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
>> +DRM_ERROR("unsupported power module: %s\n",
>> +dp_parser_pm_name(pm_type));
>> +return -EINVAL;
>> +}
>> +
>> +if (enable) {
>> +if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
>> +DRM_DEBUG_DP("core clks already enabled\n");
>> +return 0;
>> +}
>> +
>> +if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
>> +DRM_DEBUG_DP("links clks already enabled\n");
>> +return 0;
>> +}
>> +
>> +if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
>> +DRM_DEBUG_DP("Need to enable core clks before link clks\n");
>> +
>> +rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to enable clks: %s. err=%d\n",
>> +dp_parser_pm_name(DP_CORE_PM), rc);
>> +return rc;
>> +}
>> +dp_power->core_clks_on = true;
>> +}
>> +}
>> +
>> +rc = dp_power_clk_set_rate(power, pm_type, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
>> +enable ? "enable" : "disable",
>> +dp_parser_pm_name(pm_type), rc);
>> +return rc;
>> +}
>> +
>> +if (pm_type == DP_CORE_PM)
>> +dp_power->core_clks_on = enable;
>> +else
>> +dp_power->link_clks_on = enable;
>> +
>> +DRM_DEBUG_DP("%s clocks for %s\n",
>> +enable ? "enable" : "disable",
>> +dp_parser_pm_name(pm_type));
>> +DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
>> +dp_power->link_clks_on ? "on" : "off",
>> +dp_power->core_clks_on ? "on" : "off");
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_request_gpios(struct dp_power_private *power)
>> +{
>> +int rc = 0;
>> +struct device *dev = &power->pdev->dev;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (gpio_is_valid(parser->aux_en_gpio)) {
>> +rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
>> +if (rc) {
>> +DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +if (gpio_is_valid(parser->aux_sel_gpio)) {
>> +rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
>> +if (rc) {
>> +DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +if (gpio_is_valid(parser->usbplug_cc_gpio)) {
>> +rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
>> +if (rc) {
>> +DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +return 0;
>> +}
>> +
>> +static void dp_power_set_gpio(struct dp_power_private *power, bool
>> flip)
>> +{
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (gpio_is_valid(parser->aux_sel_gpio))
>> +gpio_direction_output(parser->aux_sel_gpio, flip);
>> +
>> +if (gpio_is_valid(parser->aux_en_gpio))
>> +gpio_direction_output(parser->aux_en_gpio, 0);
>> +
>> +if (gpio_is_valid(parser->usbplug_cc_gpio))
>> +gpio_set_value(parser->usbplug_cc_gpio, 0);
>> +}
>> +
>> +static int dp_power_config_gpios(struct dp_power_private *power, bool
>> flip)
>> +{
>> +int rc = 0;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return rc;
>> +
>> +rc = dp_power_request_gpios(power);
>> +if (rc) {
>> +DRM_ERROR("gpio request failed\n");
>> +return rc;
>> +}
>> +
>> +dp_power_set_gpio(power, flip);
>> +return 0;
>> +}
>> +
>> +static void dp_power_disable_gpios(struct dp_power_private *power)
>> +{
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return;
>> +
>> +gpio_set_value(parser->aux_sel_gpio, 0);
>> +gpio_set_value(parser->aux_en_gpio, 0);
>> +gpio_set_value(parser->usbplug_cc_gpio, 0);
>> +gpio_free(parser->aux_sel_gpio);
>> +gpio_free(parser->aux_en_gpio);
>> +gpio_free(parser->usbplug_cc_gpio);
>> +}
>> +
>> +int dp_power_client_init(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +return -EINVAL;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +pm_runtime_enable(&power->pdev->dev);
>> +
>> +rc = dp_power_regulator_init(power);
>> +if (rc) {
>> +DRM_ERROR("failed to init regulators %d\n", rc);
>> +goto error;
>> +}
>> +
>> +rc = dp_power_clk_init(power);
>> +if (rc) {
>> +DRM_ERROR("failed to init clocks %d\n", rc);
>> +goto error;
>> +}
>> +return 0;
>> +
>> +error:
>> +pm_runtime_disable(&power->pdev->dev);
>> +return rc;
>> +}
>> +
>> +void dp_power_client_deinit(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +return;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +dp_power_clk_deinit(power);
>> +pm_runtime_disable(&power->pdev->dev);
>> +
>> +}
>> +
>> +int dp_power_set_link_clk_parent(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +u32 num;
>> +struct dss_clk *cfg;
>> +char *name = "ctrl_link_clk";
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +rc = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +num = power->parser->mp[DP_CTRL_PM].num_clk;
>> +cfg = power->parser->mp[DP_CTRL_PM].clk_config;
>> +
>> +while (num && strcmp(cfg->clk_name, name)) {
>> +num--;
>> +cfg++;
>> +}
>> +
>> +if (num && power->link_provider) {
>> +power->link_clk_src = clk_get_parent(cfg->clk);
>> +if (power->link_clk_src) {
>> +clk_set_parent(power->link_clk_src, power->link_provider);
>> +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
>> +__clk_get_name(power->link_provider),
>> +__clk_get_name(power->link_clk_src));
>> +} else {
>> +DRM_ERROR("couldn't get parent for clk=%s\n", name);
>> +rc = -EINVAL;
>> +}
>> +} else {
>> +DRM_ERROR("%s clock could not be set parent\n", name);
>> +rc = -EINVAL;
>> +}
>> +exit:
>> +return rc;
>> +}
>> +
>> +int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +if (power->pixel_clk_rcg && power->pixel_provider) {
>> +rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
>> +if (rc) {
>> +DRM_ERROR("failed to set parent clk src, %d\n", rc);
>> +return rc;
>> +}
>> +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
>> +__clk_get_name(power->pixel_provider),
>> +__clk_get_name(power->pixel_clk_rcg));
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +int dp_power_init(struct dp_power *dp_power, bool flip)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +rc = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +pm_runtime_get_sync(&power->pdev->dev);
>> +rc = dp_power_regulator_enable(power);
>> +if (rc) {
>> +DRM_ERROR("failed to enable regulators, %d\n", rc);
>> +goto exit;
>> +}
>> +
>> +rc = dp_power_pinctrl_set(power, true);
>> +if (rc) {
>> +DRM_ERROR("failed to set pinctrl state, %d\n", rc);
>> +goto err_pinctrl;
>> +}
>> +
>> +rc = dp_power_config_gpios(power, flip);
>> +if (rc) {
>> +DRM_ERROR("failed to enable gpios, %d\n", rc);
>> +goto err_gpio;
>> +}
>> +
>> +rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
>> +if (rc) {
>> +DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
>> +goto err_clk;
>> +}
>> +
>> +return 0;
>> +
>> +err_clk:
>> +dp_power_disable_gpios(power);
>> +err_gpio:
>> +dp_power_pinctrl_set(power, false);
>> +err_pinctrl:
>> +dp_power_regulator_disable(power);
>> +exit:
>> +pm_runtime_put_sync(&power->pdev->dev);
>> +return rc;
>> +}
>> +
>> +int dp_power_deinit(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +dp_power_clk_enable(dp_power, DP_CORE_PM, false);
>> +dp_power_disable_gpios(power);
>> +dp_power_pinctrl_set(power, false);
>> +dp_power_regulator_disable(power);
>> +pm_runtime_put_sync(&power->pdev->dev);
>> +return 0;
>> +}
>> +
>> +struct dp_power *dp_power_get(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +struct dp_power *dp_power;
>> +
>> +if (!parser) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
>> +if (!power) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +power->parser = parser;
>> +power->pdev = parser->pdev;
>> +
>> +dp_power = &power->dp_power;
>> +
>> +return dp_power;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_power_put(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power = NULL;
>> +
>> +if (!dp_power)
>> +return;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +devm_kfree(&power->pdev->dev, power);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h
>> b/drivers/gpu/drm/msm/dp/dp_power.h
>> new file mode 100644
>> index 0000000..40d7e73
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
>> @@ -0,0 +1,52 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_POWER_H_
>> +#define _DP_POWER_H_
>> +
>> +#include "dp_parser.h"
>> +
>> +/**
>> + * sruct dp_power - DisplayPort's power related data
>> + *
>> + * @init: initializes the regulators/core clocks/GPIOs/pinctrl
>> + * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
>> + * @clk_enable: enable/disable the DP clocks
>> + * @set_link_clk_parent: set the parent of DP link clock
>> + * @set_pixel_clk_parent: set the parent of DP pixel clock
>> + */
>> +struct dp_power {
>> +bool core_clks_on;
>> +bool link_clks_on;
>> +};
>> +
>> +int dp_power_init(struct dp_power *power, bool flip);
>> +int dp_power_deinit(struct dp_power *power);
>> +int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type
>> pm_type,
>> +bool enable);
>> +int dp_power_set_link_clk_parent(struct dp_power *power);
>> +int dp_power_set_pixel_clk_parent(struct dp_power *power);
>> +int dp_power_client_init(struct dp_power *power);
>> +void dp_power_client_deinit(struct dp_power *power);
>> +
>> +/**
>> + * dp_power_get() - configure and get the DisplayPort power module
>> data
>> + *
>> + * @parser: instance of parser module
>> + * return: pointer to allocated power module data
>> + *
>> + * This API will configure the DisplayPort's power module and 
>> provides
>> + * methods to be called by the client to configure the power related
>> + * modueles.
>> + */
>> +struct dp_power *dp_power_get(struct dp_parser *parser);
>> +
>> +/**
>> + * dp_power_put() - release the power related resources
>> + *
>> + * @power: pointer to the power module's data
>> + */
>> +void dp_power_put(struct dp_power *power);
>> +#endif /* _DP_POWER_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h
>> b/drivers/gpu/drm/msm/dp/dp_reg.h
>> new file mode 100644
>> index 0000000..5468f7b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
>> @@ -0,0 +1,488 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_REG_H_
>> +#define _DP_REG_H_
>> +
>> +/* DP_TX Registers */
>> +#define REG_DP_HW_VERSION(0x00000000)
>> +
>> +#define REG_DP_SW_RESET(0x00000010)
>> +#define DP_SW_RESET(0x00000001)
>> +
>> +#define REG_DP_PHY_CTRL(0x00000014)
>> +#define DP_PHY_CTRL_SW_RESET_PLL(0x00000001)
>> +#define DP_PHY_CTRL_SW_RESET(0x00000004)
>> +
>> +#define REG_DP_CLK_CTRL(0x00000018)
>> +#define REG_DP_CLK_ACTIVE(0x0000001C)
>> +#define REG_DP_INTR_STATUS(0x00000020)
>> +#define REG_DP_INTR_STATUS2(0x00000024)
>> +#define REG_DP_INTR_STATUS3(0x00000028)
>> +
>> +#define REG_DP_DP_HPD_CTRL(0x00000000)
>> +#define DP_DP_HPD_CTRL_HPD_EN(0x00000001)
>> +
>> +#define REG_DP_DP_HPD_INT_STATUS(0x00000004)
>> +
>> +#define REG_DP_DP_HPD_INT_ACK(0x00000008)
>> +#define DP_DP_HPD_PLUG_INT_ACK(0x00000001)
>> +#define DP_DP_IRQ_HPD_INT_ACK(0x00000002)
>> +#define DP_DP_HPD_REPLUG_INT_ACK(0x00000004)
>> +#define DP_DP_HPD_UNPLUG_INT_ACK(0x00000008)
>> +
>> +#define REG_DP_DP_HPD_INT_MASK(0x0000000C)
>> +#define DP_DP_HPD_PLUG_INT_MASK(0x00000001)
>> +#define DP_DP_IRQ_HPD_INT_MASK(0x00000002)
>> +#define DP_DP_HPD_REPLUG_INT_MASK(0x00000004)
>> +#define DP_DP_HPD_UNPLUG_INT_MASK(0x00000008)
>> +
>> +#define REG_DP_DP_HPD_REFTIMER(0x00000018)
>> +#define REG_DP_DP_HPD_EVENT_TIME_0(0x0000001C)
>> +#define REG_DP_DP_HPD_EVENT_TIME_1(0x00000020)
>> +
>> +#define REG_DP_AUX_CTRL(0x00000030)
>> +#define DP_AUX_CTRL_ENABLE(0x00000001)
>> +#define DP_AUX_CTRL_RESET(0x00000002)
>> +
>> +#define REG_DP_AUX_DATA(0x00000034)
>> +#define DP_AUX_DATA_READ(0x00000001)
>> +#define DP_AUX_DATA_WRITE(0x00000000)
>> +#define DP_AUX_DATA_OFFSET(0x00000008)
>> +#define DP_AUX_DATA_INDEX_OFFSET(0x00000010)
>> +#define DP_AUX_DATA_MASK(0x0000ff00)
>> +#define DP_AUX_DATA_INDEX_WRITE(0x80000000)
>> +
>> +#define REG_DP_AUX_TRANS_CTRL(0x00000038)
>> +#define DP_AUX_TRANS_CTRL_I2C(0x00000100)
>> +#define DP_AUX_TRANS_CTRL_GO(0x00000200)
>> +#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR(0x00000400)
>> +#define DP_AUX_TRANS_CTRL_NO_SEND_STOP(0x00000800)
>> +
>> +#define REG_DP_TIMEOUT_COUNT(0x0000003C)
>> +#define REG_DP_AUX_LIMITS(0x00000040)
>> +#define REG_DP_AUX_STATUS(0x00000044)
>> +
>> +#define DP_DPCD_CP_IRQ(0x201)
>> +#define DP_DPCD_RXSTATUS(0x69493)
>> +
>> +#define DP_INTERRUPT_TRANS_NUM(0x000000A0)
>> +
>> +#define REG_DP_MAINLINK_CTRL(0x00000000)
>> +#define DP_MAINLINK_CTRL_ENABLE(0x00000001)
>> +#define DP_MAINLINK_CTRL_RESET(0x00000002)
>> +#define DP_MAINLINK_FB_BOUNDARY_SEL(0x02000000)
>> +
>> +#define REG_DP_STATE_CTRL(0x00000004)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1(0x00000001)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2(0x00000002)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3(0x00000004)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4(0x00000008)
>> +#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE(0x00000010)
>> +#define DP_STATE_CTRL_LINK_PRBS7(0x00000020)
>> +#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN(0x00000040)
>> +#define DP_STATE_CTRL_SEND_VIDEO(0x00000080)
>> +#define DP_STATE_CTRL_PUSH_IDLE (0x00000100)
>> +
>> +#define REG_DP_CONFIGURATION_CTRL(0x00000008)
>> +#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK(0x00000001)
>> +#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
>> +#define DP_CONFIGURATION_CTRL_P_INTERLACED(0x00000004)
>> +#define DP_CONFIGURATION_CTRL_INTERLACED_BTF(0x00000008)
>> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES(0x00000010)
>> +#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING(0x00000040)
>> +#define DP_CONFIGURATION_CTRL_SEND_VSC(0x00000080)
>> +#define DP_CONFIGURATION_CTRL_BPC(0x00000100)
>> +#define DP_CONFIGURATION_CTRL_ASSR(0x00000400)
>> +#define DP_CONFIGURATION_CTRL_RGB_YUV(0x00000800)
>> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV(0x00002000)
>> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
>> +#define DP_CONFIGURATION_CTRL_BPC_SHIFT       (0x08)
>> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT      (0x0D)
>> +
>> +#define REG_DP_SOFTWARE_MVID(0x00000010)
>> +#define REG_DP_SOFTWARE_NVID(0x00000018)
>> +#define REG_DP_TOTAL_HOR_VER(0x0000001C)
>> +#define REG_DP_START_HOR_VER_FROM_SYNC(0x00000020)
>> +#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY(0x00000024)
>> +#define REG_DP_ACTIVE_HOR_VER(0x00000028)
>> +
>> +#define REG_DP_MISC1_MISC0(0x0000002C)
>> +#define DP_MISC0_SYNCHRONOUS_CLK(0x00000001)
>> +#define DP_MISC0_COLORIMETRY_CFG_SHIFT(0x00000001)
>> +#define DP_MISC0_TEST_BITS_DEPTH_SHIFT(0x00000005)
>> +
>> +#define REG_DP_VALID_BOUNDARY(0x00000030)
>> +#define REG_DP_VALID_BOUNDARY_2(0x00000034)
>> +
>> +#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING(0x00000038)
>> +#define LANE0_MAPPING_SHIFT(0x00000000)
>> +#define LANE1_MAPPING_SHIFT(0x00000002)
>> +#define LANE2_MAPPING_SHIFT(0x00000004)
>> +#define LANE3_MAPPING_SHIFT(0x00000006)
>> +
>> +#define REG_DP_MAINLINK_READY(0x00000040)
>> +#define DP_MAINLINK_READY_FOR_VIDEO(0x00000001)
>> +#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT(0x00000003)
>> +
>> +#define REG_DP_MAINLINK_LEVELS(0x00000044)
>> +#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2(0x00000002)
>> +
>> +
>> +#define REG_DP_TU(0x0000004C)
>> +
>> +#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET(0x00000054)
>> +#define DP_HBR2_ERM_PATTERN(0x00010000)
>> +
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0(0x000000C0)
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1(0x000000C4)
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2(0x000000C8)
>> +
>> +#define MMSS_DP_MISC1_MISC0(0x0000002C)
>> +#define MMSS_DP_AUDIO_TIMING_GEN(0x00000080)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_32(0x00000084)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_32(0x00000088)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_44(0x0000008C)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_44(0x00000090)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_48(0x00000094)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_48(0x00000098)
>> +
>> +#define MMSS_DP_PSR_CRC_RG(0x00000154)
>> +#define MMSS_DP_PSR_CRC_B(0x00000158)
>> +
>> +#define REG_DP_COMPRESSION_MODE_CTRL(0x00000180)
>> +
>> +#define MMSS_DP_AUDIO_CFG(0x00000200)
>> +#define MMSS_DP_AUDIO_STATUS(0x00000204)
>> +#define MMSS_DP_AUDIO_PKT_CTRL(0x00000208)
>> +#define MMSS_DP_AUDIO_PKT_CTRL2(0x0000020C)
>> +#define MMSS_DP_AUDIO_ACR_CTRL(0x00000210)
>> +#define MMSS_DP_AUDIO_CTRL_RESET(0x00000214)
>> +
>> +#define MMSS_DP_SDP_CFG(0x00000228)
>> +#define MMSS_DP_SDP_CFG2(0x0000022C)
>> +#define MMSS_DP_AUDIO_TIMESTAMP_0(0x00000230)
>> +#define MMSS_DP_AUDIO_TIMESTAMP_1(0x00000234)
>> +
>> +#define MMSS_DP_AUDIO_STREAM_0(0x00000240)
>> +#define MMSS_DP_AUDIO_STREAM_1(0x00000244)
>> +
>> +#define MMSS_DP_EXTENSION_0(0x00000250)
>> +#define MMSS_DP_EXTENSION_1(0x00000254)
>> +#define MMSS_DP_EXTENSION_2(0x00000258)
>> +#define MMSS_DP_EXTENSION_3(0x0000025C)
>> +#define MMSS_DP_EXTENSION_4(0x00000260)
>> +#define MMSS_DP_EXTENSION_5(0x00000264)
>> +#define MMSS_DP_EXTENSION_6(0x00000268)
>> +#define MMSS_DP_EXTENSION_7(0x0000026C)
>> +#define MMSS_DP_EXTENSION_8(0x00000270)
>> +#define MMSS_DP_EXTENSION_9(0x00000274)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_0(0x00000278)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_1(0x0000027C)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_2(0x00000280)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_3(0x00000284)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_4(0x00000288)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_5(0x0000028C)
>> +#define MMSS_DP_AUDIO_ISRC_0(0x00000290)
>> +#define MMSS_DP_AUDIO_ISRC_1(0x00000294)
>> +#define MMSS_DP_AUDIO_ISRC_2(0x00000298)
>> +#define MMSS_DP_AUDIO_ISRC_3(0x0000029C)
>> +#define MMSS_DP_AUDIO_ISRC_4(0x000002A0)
>> +#define MMSS_DP_AUDIO_ISRC_5(0x000002A4)
>> +#define MMSS_DP_AUDIO_INFOFRAME_0(0x000002A8)
>> +#define MMSS_DP_AUDIO_INFOFRAME_1(0x000002AC)
>> +#define MMSS_DP_AUDIO_INFOFRAME_2(0x000002B0)
>> +
>> +#define MMSS_DP_GENERIC0_0(0x00000300)
>> +#define MMSS_DP_GENERIC0_1(0x00000304)
>> +#define MMSS_DP_GENERIC0_2(0x00000308)
>> +#define MMSS_DP_GENERIC0_3(0x0000030C)
>> +#define MMSS_DP_GENERIC0_4(0x00000310)
>> +#define MMSS_DP_GENERIC0_5(0x00000314)
>> +#define MMSS_DP_GENERIC0_6(0x00000318)
>> +#define MMSS_DP_GENERIC0_7(0x0000031C)
>> +#define MMSS_DP_GENERIC0_8(0x00000320)
>> +#define MMSS_DP_GENERIC0_9(0x00000324)
>> +#define MMSS_DP_GENERIC1_0(0x00000328)
>> +#define MMSS_DP_GENERIC1_1(0x0000032C)
>> +#define MMSS_DP_GENERIC1_2(0x00000330)
>> +#define MMSS_DP_GENERIC1_3(0x00000334)
>> +#define MMSS_DP_GENERIC1_4(0x00000338)
>> +#define MMSS_DP_GENERIC1_5(0x0000033C)
>> +#define MMSS_DP_GENERIC1_6(0x00000340)
>> +#define MMSS_DP_GENERIC1_7(0x00000344)
>> +#define MMSS_DP_GENERIC1_8(0x00000348)
>> +#define MMSS_DP_GENERIC1_9(0x0000034C)
>> +
>> +#define MMSS_DP_VSCEXT_0(0x000002D0)
>> +#define MMSS_DP_VSCEXT_1(0x000002D4)
>> +#define MMSS_DP_VSCEXT_2(0x000002D8)
>> +#define MMSS_DP_VSCEXT_3(0x000002DC)
>> +#define MMSS_DP_VSCEXT_4(0x000002E0)
>> +#define MMSS_DP_VSCEXT_5(0x000002E4)
>> +#define MMSS_DP_VSCEXT_6(0x000002E8)
>> +#define MMSS_DP_VSCEXT_7(0x000002EC)
>> +#define MMSS_DP_VSCEXT_8(0x000002F0)
>> +#define MMSS_DP_VSCEXT_9(0x000002F4)
>> +
>> +#define MMSS_DP_BIST_ENABLE(0x00000000)
>> +#define DP_BIST_ENABLE_DPBIST_EN(0x00000001)
>> +
>> +#define MMSS_DP_TIMING_ENGINE_EN(0x00000010)
>> +#define DP_TIMING_ENGINE_EN_EN(0x00000001)
>> +
>> +#define MMSS_DP_INTF_CONFIG(0x00000014)
>> +#define MMSS_DP_INTF_HSYNC_CTL(0x00000018)
>> +#define MMSS_DP_INTF_VSYNC_PERIOD_F0(0x0000001C)
>> +#define MMSS_DP_INTF_VSYNC_PERIOD_F1(0x00000020)
>> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0(0x00000024)
>> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1(0x00000028)
>> +#define MMSS_INTF_DISPLAY_V_START_F0(0x0000002C)
>> +#define MMSS_INTF_DISPLAY_V_START_F1(0x00000030)
>> +#define MMSS_DP_INTF_DISPLAY_V_END_F0(0x00000034)
>> +#define MMSS_DP_INTF_DISPLAY_V_END_F1(0x00000038)
>> +#define MMSS_DP_INTF_ACTIVE_V_START_F0(0x0000003C)
>> +#define MMSS_DP_INTF_ACTIVE_V_START_F1(0x00000040)
>> +#define MMSS_DP_INTF_ACTIVE_V_END_F0(0x00000044)
>> +#define MMSS_DP_INTF_ACTIVE_V_END_F1(0x00000048)
>> +#define MMSS_DP_INTF_DISPLAY_HCTL(0x0000004C)
>> +#define MMSS_DP_INTF_ACTIVE_HCTL(0x00000050)
>> +#define MMSS_DP_INTF_POLARITY_CTL(0x00000058)
>> +
>> +#define MMSS_DP_TPG_MAIN_CONTROL(0x00000060)
>> +#define DP_TPG_CHECKERED_RECT_PATTERN(0x00000100)
>> +
>> +#define MMSS_DP_TPG_VIDEO_CONFIG(0x00000064)
>> +#define DP_TPG_VIDEO_CONFIG_BPP_8BIT(0x00000001)
>> +#define DP_TPG_VIDEO_CONFIG_RGB(0x00000004)
>> +
>> +#define MMSS_DP_ASYNC_FIFO_CONFIG(0x00000088)
>> +
>> +/*DP PHY Register offsets */
>> +#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
>> +#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
>> +#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
>> +#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
>> +
>> +#define REG_DP_PHY_CFG                          (0x00000010)
>> +
>> +#define REG_DP_PHY_PD_CTL                       (0x00000018)
>> +#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
>> +#define DP_PHY_PD_CTL_PSR_PWRDN(0x00000002)
>> +#define DP_PHY_PD_CTL_AUX_PWRDN(0x00000004)
>> +#define DP_PHY_PD_CTL_LANE_0_1_PWRDN(0x00000008)
>> +#define DP_PHY_PD_CTL_LANE_2_3_PWRDN(0x00000010)
>> +#define DP_PHY_PD_CTL_PLL_PWRDN(0x00000020)
>> +#define DP_PHY_PD_CTL_DP_CLAMP_EN(0x00000040)
>> +
>> +#define REG_DP_PHY_MODE                         (0x0000001C)
>> +
>> +#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
>> +#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
>> +#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
>> +#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
>> +#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
>> +#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
>> +#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
>> +#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
>> +#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
>> +#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
>> +
>> +#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
>> +#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
>> +#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
>> +#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
>> +#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
>> +#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
>> +
>> +
>> +#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
>> +#define REG_DP_PHY_AUX_BIST_CFG(0x00000050)
>> +
>> +#define REG_DP_PHY_VCO_DIV0x0064
>> +#define REG_DP_PHY_TX0_TX1_LANE_CTL0x006C
>> +#define REG_DP_PHY_TX2_TX3_LANE_CTL0x0088
>> +
>> +#define REG_DP_PHY_SPARE0(0x00AC)
>> +#define DP_PHY_SPARE0_MASK(0x000F)
>> +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT(0x0004);
>> +
>> +#define REG_DP_PHY_STATUS(0x00C0)
>> +
>> +/* Tx registers */
>> +#define REG_DP_PHY_TXn_BIST_MODE_LANENO0x0000
>> +#define REG_DP_PHY_TXn_CLKBUF_ENABLE0x0008
>> +
>> +#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL0x000C
>> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK0x001F
>> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN0x0020
>> +
>> +#define REG_DP_PHY_TXn_TX_DRV_LVL0x001C
>> +#define DP_PHY_TXn_TX_DRV_LVL_MASK0x001F
>> +#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN0x0020
>> +
>> +#define REG_DP_PHY_TXn_RESET_TSYNC_EN0x0024
>> +#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN0x0028
>> +#define REG_DP_PHY_TXn_TX_BAND0x002C
>> +#define REG_DP_PHY_TXn_SLEW_CNTL0x0030
>> +#define REG_DP_PHY_TXn_INTERFACE_SELECT0x0034
>> +
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_TX0x003C
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_RX0x0040
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX0x0044
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX0x0048
>> +
>> +#define REG_DP_PHY_TXn_DEBUG_BUS_SEL0x0058
>> +#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN0x005C
>> +#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN0x0060
>> +#define REG_DP_PHY_TXn_TX_POL_INV0x0064
>> +#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
>> +
>> +#define REG_DP_PHY_TXn_LANE_MODE_10x008C
>> +
>> +#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN0x00C0
>> +#define REG_DP_PHY_TXn_TX_INTERFACE_MODE0x00C4
>> +
>> +#define REG_DP_PHY_TXn_VMODE_CTRL10x00F0
>> +
>> +/* PLL register offset */
>> +#define QSERDES_COM_ATB_SEL10x0000
>> +#define QSERDES_COM_ATB_SEL20x0004
>> +#define QSERDES_COM_FREQ_UPDATE0x0008
>> +#define QSERDES_COM_BG_TIMER0x000C
>> +#define QSERDES_COM_SSC_EN_CENTER0x0010
>> +#define QSERDES_COM_SSC_ADJ_PER10x0014
>> +#define QSERDES_COM_SSC_ADJ_PER20x0018
>> +#define QSERDES_COM_SSC_PER10x001C
>> +#define QSERDES_COM_SSC_PER20x0020
>> +#define QSERDES_COM_SSC_STEP_SIZE10x0024
>> +#define QSERDES_COM_SSC_STEP_SIZE20x0028
>> +#define QSERDES_COM_POST_DIV0x002C
>> +#define QSERDES_COM_POST_DIV_MUX0x0030
>> +
>> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN0x0034
>> +#define QSERDES_COM_BIAS_EN0x0001
>> +#define QSERDES_COM_BIAS_EN_MUX0x0002
>> +#define QSERDES_COM_CLKBUF_R_EN0x0004
>> +#define QSERDES_COM_CLKBUF_L_EN0x0008
>> +#define QSERDES_COM_EN_SYSCLK_TX_SEL0x0010
>> +#define QSERDES_COM_CLKBUF_RX_DRIVE_L0x0020
>> +#define QSERDES_COM_CLKBUF_RX_DRIVE_R0x0040
>> +
>> +#define QSERDES_COM_CLK_ENABLE10x0038
>> +#define QSERDES_COM_SYS_CLK_CTRL0x003C
>> +#define QSERDES_COM_SYSCLK_BUF_ENABLE0x0040
>> +#define QSERDES_COM_PLL_EN0x0044
>> +#define QSERDES_COM_PLL_IVCO0x0048
>> +#define QSERDES_COM_CMN_IETRIM0x004C
>> +#define QSERDES_COM_CMN_IPTRIM0x0050
>> +
>> +#define QSERDES_COM_CP_CTRL_MODE00x0060
>> +#define QSERDES_COM_CP_CTRL_MODE10x0064
>> +#define QSERDES_COM_PLL_RCTRL_MODE00x0068
>> +#define QSERDES_COM_PLL_RCTRL_MODE10x006C
>> +#define QSERDES_COM_PLL_CCTRL_MODE00x0070
>> +#define QSERDES_COM_PLL_CCTRL_MODE10x0074
>> +#define QSERDES_COM_PLL_CNTRL0x0078
>> +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM0x007C
>> +#define QSERDES_COM_SYSCLK_EN_SEL0x0080
>> +#define QSERDES_COM_CML_SYSCLK_SEL0x0084
>> +#define QSERDES_COM_RESETSM_CNTRL0x0088
>> +#define QSERDES_COM_RESETSM_CNTRL20x008C
>> +#define QSERDES_COM_LOCK_CMP_EN0x0090
>> +#define QSERDES_COM_LOCK_CMP_CFG0x0094
>> +#define QSERDES_COM_LOCK_CMP1_MODE00x0098
>> +#define QSERDES_COM_LOCK_CMP2_MODE00x009C
>> +#define QSERDES_COM_LOCK_CMP3_MODE00x00A0
>> +
>> +#define QSERDES_COM_DEC_START_MODE00x00B0
>> +#define QSERDES_COM_DEC_START_MODE10x00B4
>> +#define QSERDES_COM_DIV_FRAC_START1_MODE00x00B8
>> +#define QSERDES_COM_DIV_FRAC_START2_MODE00x00BC
>> +#define QSERDES_COM_DIV_FRAC_START3_MODE00x00C0
>> +#define QSERDES_COM_DIV_FRAC_START1_MODE10x00C4
>> +#define QSERDES_COM_DIV_FRAC_START2_MODE10x00C8
>> +#define QSERDES_COM_DIV_FRAC_START3_MODE10x00CC
>> +#define QSERDES_COM_INTEGLOOP_INITVAL0x00D0
>> +#define QSERDES_COM_INTEGLOOP_EN0x00D4
>> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE00x00D8
>> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE00x00DC
>> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE10x00E0
>> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE10x00E4
>> +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL0x00E8
>> +#define QSERDES_COM_VCO_TUNE_CTRL0x00EC
>> +#define QSERDES_COM_VCO_TUNE_MAP0x00F0
>> +
>> +#define QSERDES_COM_CMN_STATUS0x0124
>> +#define QSERDES_COM_RESET_SM_STATUS0x0128
>> +
>> +#define QSERDES_COM_CLK_SEL0x0138
>> +#define QSERDES_COM_HSCLK_SEL0x013C
>> +
>> +#define QSERDES_COM_CORECLK_DIV_MODE00x0148
>> +
>> +#define QSERDES_COM_SW_RESET0x0150
>> +#define QSERDES_COM_CORE_CLK_EN0x0154
>> +#define QSERDES_COM_C_READY_STATUS0x0158
>> +#define QSERDES_COM_CMN_CONFIG0x015C
>> +
>> +#define QSERDES_COM_SVS_MODE_CLK_SEL0x0164
>> +
>> +/* DP MMSS_CC registers */
>> +#define MMSS_DP_LINK_CMD_RCGR(0x0138)
>> +#define MMSS_DP_LINK_CFG_RCGR(0x013C)
>> +#define MMSS_DP_PIXEL_M(0x0174)
>> +#define MMSS_DP_PIXEL_N(0x0178)
>> +
>> +/* DP HDCP 1.3 registers */
>> +#define DP_HDCP_CTRL                                   (0x0A0)
>> +#define DP_HDCP_STATUS                                 (0x0A4)
>> +#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
>> +#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
>> +#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
>> +#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
>> +#define DP_HDCP_SHA_STATUS                             (0x0C8)
>> +#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
>> +#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
>> +#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
>> +#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
>> +#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
>> +
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
>> +
>> +/* USB3 DP COM registers */
>> +#define REG_USB3_DP_COM_RESET_OVRD_CTRL(0x1C)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET(0x01)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX(0x02)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET(0x04)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX(0x08)
>> +
>> +#define REG_USB3_DP_COM_PHY_MODE_CTRL(0x00)
>> +#define USB3_DP_COM_PHY_MODE_DP(0x02)
>> +
>> +#define REG_USB3_DP_COM_SW_RESET(0x04)
>> +#define USB3_DP_COM_SW_RESET_SET(0x01)
>> +
>> +#define REG_USB3_DP_COM_TYPEC_CTRL(0x10)
>> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL(0x01)
>> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX(0x02)
>> +
>> +#define REG_USB3_DP_COM_SWI_CTRL(0x0c)
>> +
>> +#define REG_USB3_DP_COM_POWER_DOWN_CTRL(0x08)
>> +#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN(0x01)
>> +
>> +
>> +
>> +#endif /* _DP_REG_H_ */
>> diff --git a/drivers/gpu/drm/msm/msm_drv.c
>> b/drivers/gpu/drm/msm/msm_drv.c
>> index c84f0a8..e5e93e3 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.c
>> +++ b/drivers/gpu/drm/msm/msm_drv.c
>> @@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
>>  msm_dsi_register();
>>  msm_edp_register();
>>  msm_hdmi_register();
>> +msm_dp_register();
>>  adreno_register();
>>  return platform_driver_register(&msm_platform_driver);
>>  }
>> @@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
>>  {
>>  DBG("fini");
>>  platform_driver_unregister(&msm_platform_driver);
>> +msm_dp_unregister();
>>  msm_hdmi_unregister();
>>  adreno_unregister();
>>  msm_edp_unregister();
>> diff --git a/drivers/gpu/drm/msm/msm_drv.h
>> b/drivers/gpu/drm/msm/msm_drv.h
>> index 71547e7..8b068ec 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.h
>> +++ b/drivers/gpu/drm/msm/msm_drv.h
>> @@ -159,6 +159,8 @@ struct msm_drm_private {
>>  /* DSI is shared by mdp4 and mdp5 */
>>  struct msm_dsi *dsi[2];
>> 
>> +struct msm_dp *dp;
>> +
>>  /* when we have more than one 'msm_gpu' these need to be an array: */
>>  struct msm_gpu *gpu;
>>  struct msm_file_private *lastctx;
>> @@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct
>> msm_dsi *msm_dsi,
>>  }
>>  #endif
>> 
>> +#ifdef CONFIG_DRM_MSM_DP
>> +int __init msm_dp_register(void);
>> +void __exit msm_dp_unregister(void);
>> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
>> *dev,
>> + struct drm_encoder *encoder);
>> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
>> *encoder);
>> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
>> *encoder);
>> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
>> *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode);
>> +
>> +#else
>> +static inline int __init msm_dp_register(void)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline void __exit msm_dp_unregister(void)
>> +{
>> +}
>> +static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
>> +       struct drm_device *dev,
>> +       struct drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline int msm_dp_display_enable(struct msm_dp *dp, struct
>> drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline int msm_dp_display_disable(struct msm_dp *dp, struct
>> drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct
>> drm_encoder *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode)
>> +{
>> +}
>> +#endif
>> +
>>  void __init msm_mdp_register(void);
>>  void __exit msm_mdp_unregister(void);
>>  void __init msm_dpu_register(void);
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: FW: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[varar]

Hi Matthias

The earlier patchsets of the same series were reviewed by Sean so we 
were spending our efforts addressing the comments based on the earlier 
versions. We think the delay in getting reviews and also posting newer 
versions was not specifically due to the size of the code but also due 
to business reasons around that time. This is the basic version of the 
DP driver where all the files are tightly coupled. We understand that 
this is a big series and we have tried to break it up 
functionality-wise. For example, we are going to post hot-plug related 
changes and some more functionality like audio in a later patch. Also, 
we shall be posting a newer version of this series within a day or two 
which shall address the comments posted so far along with the checkpatch 
fixes and changes needed to make DP work on Trogdor. Hence we request 
that the new version which shall be posted be reviewed first and if 
there is some split-up which can be done further, let us know and we 
shall try to address that in the next patchsets.

Thanks

Vara (on behalf of Display team)

> -------- Original Message --------
> Subject: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver
> support
> Date: 2020-02-28 13:49
>  From: Matthias Kaehlcke <mka@chromium.org>
> To: Chandan Uddaraju <chandanu@codeaurora.org>
> Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
> abhinavk@codeaurora.org, seanpaul@chromium.org,
> dri-devel@lists.freedesktop.org, hoegsberg@google.com,
> freedreno@lists.freedesktop.org
> 
> Hi Chandan,
> 
> I have no DRM background, but I suspect one reason this patch hasn't
> been reviewed in almost 3 months is its size, 8k LOC. I would suggest 
> to
> split it up into multiple pieces to make a review less daunting. Not
> sure
> what the exact split would be, evaluating it per source file/self
> contained function could be a starting point.
> 
> And please make sure to run scripts/checkpatch.pl before sending 
> patches
> (especially larger ones), reviewers don't like to spend time pointing
> out
> formatting issues that should have been fixed beforehand:
> 
> ./scripts/checkpatch.pl
> DPU-v3-3-5-drm-msm-dp-add-displayPort-driver-support.patch
> 
> ...
> 
> total: 2 errors, 141 warnings, 8440 lines checked
> 
> Thanks
> 
> Matthias
> 
> On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
>> Add the needed displayPort files to enable DP driver
>> on msm target.
>> 
>> "dp_display" module is the main module that calls into
>> other sub-modules. "dp_drm" file represents the interface
>> between DRM framework and DP driver.
>> 
>> changes in v2:
>> -- Update copyright markings on all relevant files.
>> -- Change pr_err() to DRM_ERROR()
>> -- Use APIs directly instead of function pointers.
>> -- Use drm_display_mode structure to store link parameters in the
>> driver.
>> -- Use macros for register definitions instead of hardcoded values.
>> -- Replace writel_relaxed/readl_relaxed with writel/readl
>>    and remove memory barriers.
>> -- Remove unnecessary NULL checks.
>> -- Use drm helper functions for dpcd read/write.
>> -- Use DRM_DEBUG_DP for debug msgs.
>> 
>> changes in V3:
>> -- Removed changes in dpu_io_util.[ch]
>> -- Added locking around "is_connected" flag and removed atomic_set()
>> -- Removed the argument validation checks in all the static functions
>>    except initialization functions and few API calls across msm/dp
>> files
>> -- Removed hardcoded values for register reads/writes
>> -- Removed vreg related generic structures.
>> -- Added return values where ever necessary.
>> -- Updated dp_ctrl_on function.
>> -- Calling the ctrl specific catalog functions directly instead of
>>    function pointers.
>> -- Added seperate change that adds standard value in drm_dp_helper
>> file.
>> -- Added separate change in this list that is used to initialize
>>    displayport in DPU driver.
>> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>> 
>> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/Kconfig                 |    9 +
>>  drivers/gpu/drm/msm/Makefile                |   13 +
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
>>  drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
>>  drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
>>  drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
>>  drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590
>> +++++++++++++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
>>  drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
>>  drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
>>  drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
>>  drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
>>  drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
>>  drivers/gpu/drm/msm/dp/dp_link.c            | 1185
>> ++++++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
>>  drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
>>  drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
>>  drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
>>  drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
>>  drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
>>  drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
>>  drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
>>  drivers/gpu/drm/msm/msm_drv.c               |    2 +
>>  drivers/gpu/drm/msm/msm_drv.h               |   42 +
>>  26 files changed, 8366 insertions(+)
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
>>  create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h
>> 
>> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
>> index 6deaa7d..7946cb1 100644
>> --- a/drivers/gpu/drm/msm/Kconfig
>> +++ b/drivers/gpu/drm/msm/Kconfig
>> @@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
>>  help
>>    Choose this option to enable HDCP state machine
>> 
>> +config DRM_MSM_DP
>> +bool "Enable DP support in MSM DRM driver"
>> +depends on DRM_MSM
>> +default n
>> +help
>> +  Compile in support for DP driver in msm drm driver. DP external
>> +  display support is enabled through this config option. It can
>> +  be primary or secondary display on device.
>> +
>>  config DRM_MSM_DSI
>>  bool "Enable DSI support in MSM DRM driver"
>>  depends on DRM_MSM
>> diff --git a/drivers/gpu/drm/msm/Makefile
>> b/drivers/gpu/drm/msm/Makefile
>> index 1579cf0..5939f41 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -2,6 +2,7 @@
>>  ccflags-y := -I $(srctree)/$(src)
>>  ccflags-y += -I $(srctree)/$(src)/disp/dpu1
>>  ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
>> +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
>> 
>>  msm-y := \
>>  adreno/adreno_device.o \
>> @@ -96,8 +97,20 @@ msm-y := \
>> 
>>  msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
>> 
>> +
>>  msm-$(CONFIG_DRM_MSM_GPU_STATE)+= adreno/a6xx_gpu_state.o
>> 
>> +msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
>> +dp/dp_catalog.o \
>> +dp/dp_ctrl.o \
>> +dp/dp_display.o \
>> +dp/dp_drm.o \
>> +dp/dp_extcon.o \
>> +dp/dp_link.o \
>> +dp/dp_panel.o \
>> +dp/dp_parser.o \
>> +dp/dp_power.o
>> +
>>  msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
>>  msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
>>  msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index f96e142..29ac7d3 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct
>> drm_encoder *drm_enc,
>> 
>>  trace_dpu_enc_mode_set(DRMID(drm_enc));
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
>> +msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
>> +
>>  list_for_each_entry(conn_iter, connector_list, head)
>>  if (conn_iter->encoder == drm_enc)
>>  conn = conn_iter;
>> @@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>>  {
>>  struct dpu_encoder_virt *dpu_enc = NULL;
>>  int ret = 0;
>> +struct msm_drm_private *priv;
>>  struct drm_display_mode *cur_mode = NULL;
>> 
>>  if (!drm_enc) {
>> @@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>> 
>>  mutex_lock(&dpu_enc->enc_lock);
>>  cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
>> +priv = drm_enc->dev->dev_private;
>> 
>>  trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
>>       cur_mode->vdisplay);
>> @@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct
>> drm_encoder *drm_enc)
>> 
>>  _dpu_encoder_virt_enable_helper(drm_enc);
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
>> +ret = msm_dp_display_enable(priv->dp,
>> +drm_enc);
>> +if (ret) {
>> +DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
>> +ret);
>> +goto out;
>> +}
>> +}
>>  dpu_enc->enabled = true;
>> 
>>  out:
>> @@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct
>> drm_encoder *drm_enc)
>>  priv = drm_enc->dev->dev_private;
>>  dpu_kms = to_dpu_kms(priv->kms);
>> 
>> +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
>> +if (msm_dp_display_disable(priv->dp, drm_enc)) {
>> +DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
>> +return;
>> +  }
>> +}
>>  trace_dpu_enc_disable(DRMID(drm_enc));
>> 
>>  /* wait for idle */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>> b/drivers/gpu/drm/msm/dp/dp_aux.c
>> new file mode 100644
>> index 0000000..a6bb52a
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -0,0 +1,548 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/delay.h>
>> +
>> +#include "dp_reg.h"
>> +#include "dp_aux.h"
>> +
>> +#define DP_AUX_ENUM_STR(x)#x
>> +
>> +struct dp_aux_private {
>> +struct device *dev;
>> +struct dp_aux dp_aux;
>> +struct dp_catalog *catalog;
>> +
>> +struct mutex mutex;
>> +struct completion comp;
>> +
>> +u32 aux_error_num;
>> +u32 retry_cnt;
>> +bool cmd_busy;
>> +bool native;
>> +bool read;
>> +bool no_send_addr;
>> +bool no_send_stop;
>> +u32 offset;
>> +u32 segment;
>> +u32 isr;
>> +
>> +struct drm_dp_aux drm_aux;
>> +};
>> +
>> +static char *dp_aux_get_error(u32 aux_error)
>> +{
>> +switch (aux_error) {
>> +case DP_AUX_ERR_NONE:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
>> +case DP_AUX_ERR_ADDR:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
>> +case DP_AUX_ERR_TOUT:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
>> +case DP_AUX_ERR_NACK:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
>> +case DP_AUX_ERR_DEFER:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
>> +case DP_AUX_ERR_NACK_DEFER:
>> +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +static u32 dp_aux_write(struct dp_aux_private *aux,
>> +struct drm_dp_aux_msg *msg)
>> +{
>> +u32 data[4], reg, len;
>> +u8 *msgdata = msg->buffer;
>> +int const aux_cmd_fifo_len = 128;
>> +int i = 0;
>> +
>> +if (aux->read)
>> +len = 4;
>> +else
>> +len = msg->size + 4;
>> +
>> +/*
>> + * cmd fifo only has depth of 144 bytes
>> + * limit buf length to 128 bytes here
>> + */
>> +if (len > aux_cmd_fifo_len) {
>> +DRM_ERROR("buf len error\n");
>> +return 0;
>> +}
>> +
>> +/* Pack cmd and write to HW */
>> +data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
>> +if (aux->read)
>> +data[0] |=  BIT(4); /* R/W */
>> +
>> +data[1] = (msg->address >> 8) & 0xff;/* addr[15:8] */
>> +data[2] = msg->address & 0xff;/* addr[7:0] */
>> +data[3] = (msg->size - 1) & 0xff;/* len[7:0] */
>> +
>> +for (i = 0; i < len; i++) {
>> +reg = (i < 4) ? data[i] : msgdata[i - 4];
>> +/* index = 0, write */
>> +reg = (((reg) << DP_AUX_DATA_OFFSET)
>> +       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
>> +if (i == 0)
>> +reg |= DP_AUX_DATA_INDEX_WRITE;
>> +aux->catalog->aux_data = reg;
>> +dp_catalog_aux_write_data(aux->catalog);
>> +}
>> +
>> +dp_catalog_aux_clear_trans(aux->catalog, false);
>> +
>> +reg = 0; /* Transaction number == 1 */
>> +if (!aux->native) { /* i2c */
>> +reg |= DP_AUX_TRANS_CTRL_I2C;
>> +
>> +if (aux->no_send_addr)
>> +reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
>> +
>> +if (aux->no_send_stop)
>> +reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
>> +}
>> +
>> +reg |= DP_AUX_TRANS_CTRL_GO;
>> +aux->catalog->aux_data = reg;
>> +dp_catalog_aux_write_trans(aux->catalog);
>> +
>> +return len;
>> +}
>> +
>> +static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>> +      struct drm_dp_aux_msg *msg)
>> +{
>> +u32 ret = 0, len = 0, timeout;
>> +int const aux_timeout_ms = HZ/4;
>> +
>> +reinit_completion(&aux->comp);
>> +
>> +len = dp_aux_write(aux, msg);
>> +if (len == 0) {
>> +DRM_ERROR("DP AUX write failed\n");
>> +return -EINVAL;
>> +}
>> +
>> +timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
>> +if (!timeout) {
>> +DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
>> +return -ETIMEDOUT;
>> +}
>> +
>> +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
>> +ret = len;
>> +} else {
>> +DRM_ERROR_RATELIMITED("aux err: %s\n",
>> +dp_aux_get_error(aux->aux_error_num));
>> +
>> +ret = -EINVAL;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
>> +struct drm_dp_aux_msg *msg)
>> +{
>> +u32 data;
>> +u8 *dp;
>> +u32 i, actual_i;
>> +u32 len = msg->size;
>> +
>> +dp_catalog_aux_clear_trans(aux->catalog, true);
>> +
>> +data = 0;
>> +data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
>> +data |= DP_AUX_DATA_READ;  /* read */
>> +
>> +aux->catalog->aux_data = data;
>> +dp_catalog_aux_write_data(aux->catalog);
>> +
>> +dp = msg->buffer;
>> +
>> +/* discard first byte */
>> +data = dp_catalog_aux_read_data(aux->catalog);
>> +
>> +for (i = 0; i < len; i++) {
>> +data = dp_catalog_aux_read_data(aux->catalog);
>> +*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
>> +
>> +actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
>> +if (i != actual_i)
>> +pr_warn("Index mismatch: expected %d, found %d\n",
>> +i, actual_i);
>> +}
>> +}
>> +
>> +static void dp_aux_native_handler(struct dp_aux_private *aux)
>> +{
>> +u32 isr = aux->isr;
>> +
>> +if (isr & DP_INTR_AUX_I2C_DONE)
>> +aux->aux_error_num = DP_AUX_ERR_NONE;
>> +else if (isr & DP_INTR_WRONG_ADDR)
>> +aux->aux_error_num = DP_AUX_ERR_ADDR;
>> +else if (isr & DP_INTR_TIMEOUT)
>> +aux->aux_error_num = DP_AUX_ERR_TOUT;
>> +if (isr & DP_INTR_NACK_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +
>> +complete(&aux->comp);
>> +}
>> +
>> +static void dp_aux_i2c_handler(struct dp_aux_private *aux)
>> +{
>> +u32 isr = aux->isr;
>> +
>> +if (isr & DP_INTR_AUX_I2C_DONE) {
>> +if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +else
>> +aux->aux_error_num = DP_AUX_ERR_NONE;
>> +} else {
>> +if (isr & DP_INTR_WRONG_ADDR)
>> +aux->aux_error_num = DP_AUX_ERR_ADDR;
>> +else if (isr & DP_INTR_TIMEOUT)
>> +aux->aux_error_num = DP_AUX_ERR_TOUT;
>> +if (isr & DP_INTR_NACK_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
>> +if (isr & DP_INTR_I2C_NACK)
>> +aux->aux_error_num = DP_AUX_ERR_NACK;
>> +if (isr & DP_INTR_I2C_DEFER)
>> +aux->aux_error_num = DP_AUX_ERR_DEFER;
>> +}
>> +
>> +complete(&aux->comp);
>> +}
>> +
>> +static void dp_aux_update_offset_and_segment(struct dp_aux_private
>> *aux,
>> +     struct drm_dp_aux_msg *input_msg)
>> +{
>> +u32 const edid_address = 0x50;
>> +u32 const segment_address = 0x30;
>> +bool i2c_read = input_msg->request &
>> +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +u8 *data = NULL;
>> +
>> +if (aux->native || i2c_read || ((input_msg->address != edid_address)
>> &&
>> +(input_msg->address != segment_address)))
>> +return;
>> +
>> +
>> +data = input_msg->buffer;
>> +if (input_msg->address == segment_address)
>> +aux->segment = *data;
>> +else
>> +aux->offset = *data;
>> +}
>> +
>> +/**
>> + * dp_aux_transfer_helper() - helper function for EDID read
>> transactions
>> + *
>> + * @aux: DP AUX private structure
>> + * @input_msg: input message from DRM upstream APIs
>> + *
>> + * return: void
>> + *
>> + * This helper function is used to fix EDID reads for non-compliant
>> + * sinks that do not handle the i2c middle-of-transaction flag
>> correctly.
>> + */
>> +static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>> +   struct drm_dp_aux_msg *input_msg)
>> +{
>> +struct drm_dp_aux_msg helper_msg;
>> +u32 const message_size = 0x10;
>> +u32 const segment_address = 0x30;
>> +bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
>> +bool i2c_read = input_msg->request &
>> +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +
>> +if (!i2c_mot || !i2c_read || (input_msg->size == 0))
>> +return;
>> +
>> +aux->read = false;
>> +aux->cmd_busy = true;
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = true;
>> +
>> +/*
>> + * Send the segment address for every i2c read in which the
>> + * middle-of-tranaction flag is set. This is required to support EDID
>> + * reads of more than 2 blocks as the segment address is reset to 0
>> + * since we are overriding the middle-of-transaction flag for read
>> + * transactions.
>> + */
>> +memset(&helper_msg, 0, sizeof(helper_msg));
>> +helper_msg.address = segment_address;
>> +helper_msg.buffer = &aux->segment;
>> +helper_msg.size = 1;
>> +dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +
>> +/*
>> + * Send the offset address for every i2c read in which the
>> + * middle-of-transaction flag is set. This will ensure that the sink
>> + * will update its read pointer and return the correct portion of the
>> + * EDID buffer in the subsequent i2c read trasntion triggered in the
>> + * native AUX transfer function.
>> + */
>> +memset(&helper_msg, 0, sizeof(helper_msg));
>> +helper_msg.address = input_msg->address;
>> +helper_msg.buffer = &aux->offset;
>> +helper_msg.size = 1;
>> +dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +aux->offset += message_size;
>> +
>> +if (aux->offset == 0x80 || aux->offset == 0x100)
>> +aux->segment = 0x0; /* reset segment at end of block */
>> +}
>> +
>> +/*
>> + * This function does the real job to process an AUX transaction.
>> + * It will call aux_reset() function to reset the AUX channel,
>> + * if the waiting is timeout.
>> + */
>> +static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
>> +       struct drm_dp_aux_msg *msg)
>> +{
>> +ssize_t ret;
>> +int const aux_cmd_native_max = 16;
>> +int const aux_cmd_i2c_max = 128;
>> +int const retry_count = 5;
>> +struct dp_aux_private *aux = container_of(drm_aux,
>> +struct dp_aux_private, drm_aux);
>> +
>> +mutex_lock(&aux->mutex);
>> +
>> +aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>> DP_AUX_NATIVE_READ);
>> +
>> +/* Ignore address only message */
>> +if ((msg->size == 0) || (msg->buffer == NULL)) {
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +ret = msg->size;
>> +goto unlock_exit;
>> +}
>> +
>> +/* msg sanity check */
>> +if ((aux->native && (msg->size > aux_cmd_native_max)) ||
>> +(msg->size > aux_cmd_i2c_max)) {
>> +DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>> +__func__, msg->size, msg->request);
>> +ret = -EINVAL;
>> +goto unlock_exit;
>> +}
>> +
>> +dp_aux_update_offset_and_segment(aux, msg);
>> +dp_aux_transfer_helper(aux, msg);
>> +
>> +aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>> +aux->cmd_busy = true;
>> +
>> +if (aux->read) {
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = false;
>> +} else {
>> +aux->no_send_addr = true;
>> +aux->no_send_stop = true;
>> +}
>> +
>> +ret = dp_aux_cmd_fifo_tx(aux, msg);
>> +if ((ret < 0) && aux->native) {
>> +aux->retry_cnt++;
>> +if (!(aux->retry_cnt % retry_count))
>> +dp_catalog_aux_update_cfg(aux->catalog,
>> +aux->dp_aux.cfg, PHY_AUX_CFG1);
>> +dp_catalog_aux_reset(aux->catalog);
>> +goto unlock_exit;
>> +} else if (ret < 0) {
>> +goto unlock_exit;
>> +}
>> +
>> +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
>> +if (aux->read)
>> +dp_aux_cmd_fifo_rx(aux, msg);
>> +
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +} else {
>> +/* Reply defer to retry */
>> +msg->reply = aux->native ?
>> +DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
>> +}
>> +
>> +/* Return requested size for success or retry */
>> +ret = msg->size;
>> +aux->retry_cnt = 0;
>> +
>> +unlock_exit:
>> +aux->cmd_busy = false;
>> +mutex_unlock(&aux->mutex);
>> +return ret;
>> +}
>> +
>> +static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg
>> *aux_cfg)
>> +{
>> +int i = 0;
>> +
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++)
>> +aux_cfg[i].current_index = 0;
>> +}
>> +
>> +void dp_aux_isr(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +aux->isr = dp_catalog_aux_get_irq(aux->catalog);
>> +
>> +if (!aux->cmd_busy)
>> +return;
>> +
>> +if (aux->native)
>> +dp_aux_native_handler(aux);
>> +else
>> +dp_aux_i2c_handler(aux);
>> +}
>> +
>> +void dp_aux_reconfig(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_catalog_aux_update_cfg(aux->catalog,
>> +dp_aux->cfg, PHY_AUX_CFG1);
>> +dp_catalog_aux_reset(aux->catalog);
>> +}
>> +
>> +void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux || !aux_cfg) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_aux_reset_phy_config_indices(aux_cfg);
>> +dp_catalog_aux_setup(aux->catalog, aux_cfg);
>> +dp_catalog_aux_reset(aux->catalog);
>> +dp_catalog_aux_enable(aux->catalog, true);
>> +aux->retry_cnt = 0;
>> +}
>> +
>> +void dp_aux_deinit(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +dp_catalog_aux_enable(aux->catalog, false);
>> +}
>> +
>> +int dp_aux_register(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +int ret = 0;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +aux->drm_aux.name = "dpu_dp_aux";
>> +aux->drm_aux.dev = aux->dev;
>> +aux->drm_aux.transfer = dp_aux_transfer;
>> +ret = drm_dp_aux_register(&aux->drm_aux);
>> +if (ret) {
>> +DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
>> +goto exit;
>> +}
>> +dp_aux->drm_aux = &aux->drm_aux;
>> +exit:
>> +return ret;
>> +}
>> +
>> +void dp_aux_unregister(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +drm_dp_aux_unregister(&aux->drm_aux);
>> +}
>> +
>> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
>> *catalog,
>> +  struct dp_aux_cfg *aux_cfg)
>> +{
>> +int rc = 0;
>> +struct dp_aux_private *aux;
>> +struct dp_aux *dp_aux;
>> +
>> +if (!catalog || !aux_cfg) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -ENODEV;
>> +goto error;
>> +}
>> +
>> +aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
>> +if (!aux) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +init_completion(&aux->comp);
>> +aux->cmd_busy = false;
>> +mutex_init(&aux->mutex);
>> +
>> +aux->dev = dev;
>> +aux->catalog = catalog;
>> +aux->dp_aux.cfg = aux_cfg;
>> +dp_aux = &aux->dp_aux;
>> +aux->retry_cnt = 0;
>> +
>> +return dp_aux;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_aux_put(struct dp_aux *dp_aux)
>> +{
>> +struct dp_aux_private *aux;
>> +
>> +if (!dp_aux)
>> +return;
>> +
>> +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +mutex_destroy(&aux->mutex);
>> +
>> +devm_kfree(aux->dev, aux);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h
>> b/drivers/gpu/drm/msm/dp/dp_aux.h
>> new file mode 100644
>> index 0000000..8ce2221
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
>> @@ -0,0 +1,37 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_AUX_H_
>> +#define _DP_AUX_H_
>> +
>> +#include "dp_catalog.h"
>> +#include <drm/drm_dp_helper.h>
>> +
>> +enum dp_aux_error {
>> +DP_AUX_ERR_NONE= 0,
>> +DP_AUX_ERR_ADDR= -1,
>> +DP_AUX_ERR_TOUT= -2,
>> +DP_AUX_ERR_NACK= -3,
>> +DP_AUX_ERR_DEFER= -4,
>> +DP_AUX_ERR_NACK_DEFER= -5,
>> +};
>> +
>> +struct dp_aux {
>> +struct drm_dp_aux *drm_aux;
>> +struct dp_aux_cfg *cfg;
>> +};
>> +
>> +int dp_aux_register(struct dp_aux *aux);
>> +void dp_aux_unregister(struct dp_aux *aux);
>> +void dp_aux_isr(struct dp_aux *aux);
>> +void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
>> +void dp_aux_deinit(struct dp_aux *aux);
>> +void dp_aux_reconfig(struct dp_aux *aux);
>> +
>> +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
>> *catalog,
>> +  struct dp_aux_cfg *aux_cfg);
>> +void dp_aux_put(struct dp_aux *aux);
>> +
>> +#endif /*__DP_AUX_H_*/
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> new file mode 100644
>> index 0000000..51e21bb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> @@ -0,0 +1,841 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/delay.h>
>> +#include <linux/iopoll.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include "dp_catalog.h"
>> +#include "dp_reg.h"
>> +
>> +#define POLLING_SLEEP_US1000
>> +#define POLLING_TIMEOUT_US10000
>> +
>> +#define REFTIMER_DEFAULT_VALUE0x20000
>> +#define SCRAMBLER_RESET_COUNT_VALUE0xFC
>> +
>> +#define DP_INTERRUPT_STATUS_ACK_SHIFT1
>> +#define DP_INTERRUPT_STATUS_MASK_SHIFT2
>> +
>> +#define DP_INTERRUPT_STATUS1 \
>> +(DP_INTR_AUX_I2C_DONE| \
>> +DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
>> +DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
>> +DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
>> +DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
>> +
>> +#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT)
>> +#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 <<
>> DP_INTERRUPT_STATUS_MASK_SHIFT)
>> +
>> +#define DP_INTERRUPT_STATUS2 \
>> +(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
>> +DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
>> +
>> +#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT)
>> +#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 <<
>> DP_INTERRUPT_STATUS_MASK_SHIFT)
>> +
>> +static u8 const vm_pre_emphasis[4][4] = {
>> +{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
>> +{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
>> +{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
>> +{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
>> +};
>> +
>> +/* voltage swing, 0.2v and 1.0v are not support */
>> +static u8 const vm_voltage_swing[4][4] = {
>> +{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
>> +{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
>> +{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
>> +{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
>> +};
>> +
>> +struct dp_catalog_private {
>> +struct device *dev;
>> +struct dp_io *io;
>> +struct dp_catalog dp_catalog;
>> +};
>> +
>> +static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_aux.base + offset);
>> +}
>> +
>> +static inline void dp_write_aux(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure aux reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_aux.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_ahb.base + offset);
>> +}
>> +
>> +static inline void dp_write_ahb(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure phy reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_ahb.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_cc_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_phy(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure phy reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->phy_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_pll(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_ln_tx0(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_ln_tx1(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
>> +}
>> +
>> +static inline void dp_write_usb_cm(struct dp_catalog_private 
>> *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure usb reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->usb3_dp_com.base + offset);
>> +}
>> +
>> +static inline void dp_write_p0(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure interface reg writes happens before any other
>> operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_p0.base + offset);
>> +}
>> +
>> +static inline u32 dp_read_link(struct dp_catalog_private *catalog, 
>> u32
>> offset)
>> +{
>> +return readl_relaxed(catalog->io->dp_link.base + offset);
>> +}
>> +
>> +static inline void dp_write_link(struct dp_catalog_private *catalog,
>> +       u32 offset, u32 data)
>> +{
>> +/*
>> + * To make sure link reg writes happens before any other operation,
>> + * this function uses writel() instread of writel_relaxed()
>> + */
>> +writel(data, catalog->io->dp_link.base + offset);
>> +}
>> +
>> +/* aux related catalog functions */
>> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +return dp_read_aux(catalog, REG_DP_AUX_DATA);
>> +}
>> +
>> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
>> +{
>> +int rc = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
>> +return rc;
>> +}
>> +
>> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
>> +{
>> +int rc = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
>> +return rc;
>> +}
>> +
>> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
>> read)
>> +{
>> +int rc = 0;
>> +u32 data = 0;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (read) {
>> +data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
>> +data &= ~DP_AUX_TRANS_CTRL_GO;
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
>> +} else {
>> +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
>> +}
>> +return rc;
>> +}
>> +
>> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
>> +{
>> +u32 aux_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
>> +
>> +aux_ctrl |= DP_AUX_CTRL_RESET;
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +
>> +aux_ctrl &= ~DP_AUX_CTRL_RESET;
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +}
>> +
>> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool 
>> enable)
>> +{
>> +u32 aux_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
>> +
>> +if (enable) {
>> +dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
>> +dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
>> +aux_ctrl |= DP_AUX_CTRL_ENABLE;
>> +} else {
>> +aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
>> +}
>> +
>> +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
>> +}
>> +
>> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 new_index = 0, current_index = 0;
>> +
>> +if (type >= PHY_AUX_CFG_MAX) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +current_index = cfg[type].current_index;
>> +new_index = (current_index + 1) % cfg[type].cfg_cnt;
>> +DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
>> +dp_phy_aux_config_type_to_string(type),
>> +cfg[type].lut[current_index], cfg[type].lut[new_index]);
>> +
>> +dp_write_phy(catalog, cfg[type].offset,
>> +cfg[type].lut[new_index]);
>> +cfg[type].current_index = new_index;
>> +}
>> +
>> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +int i = 0;
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
>> +DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
>> +DP_PHY_PD_CTL_DP_CLAMP_EN);
>> +
>> +/* Turn on BIAS current for PHY/PLL */
>> +dp_write_pll(catalog,
>> +QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
>> +QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
>> +QSERDES_COM_EN_SYSCLK_TX_SEL);
>> +
>> +/* DP AUX CFG register programming */
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
>> +dp_phy_aux_config_type_to_string(i),
>> +cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
>> +dp_write_phy(catalog, cfg[i].offset,
>> +cfg[i].lut[cfg[i].current_index]);
>> +}
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK,
>> PHY_AUX_STOP_ERR_MASK |
>> +PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
>> +PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
>> +}
>> +
>> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 intr, intr_ack;
>> +
>> +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
>> +intr &= ~DP_INTERRUPT_STATUS1_MASK;
>> +intr_ack = (intr & DP_INTERRUPT_STATUS1) <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT;
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack |
>> DP_INTERRUPT_STATUS1_MASK);
>> +
>> +return intr;
>> +
>> +}
>> +
>> +/* controller related catalog functions */
>> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
>> *dp_catalog,
>> +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
>> +dp_write_link(catalog, REG_DP_TU, dp_tu);
>> +dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
>> +}
>> +
>> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, state);
>> +}
>> +
>> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
>> cfg)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
>> +
>> +dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
>> +}
>> +
>> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
>> +u32 ln_mapping;
>> +
>> +ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
>> +ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
>> +ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
>> +ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
>> +
>> +dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING,
>> ln_mapping);
>> +}
>> +
>> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
>> +bool enable)
>> +{
>> +u32 mainlink_ctrl;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (enable) {
>> +/*
>> +* To make sure link reg writes happens before any other operation,
>> +* dp_write_link() function uses writel() instread of
>> writel_relaxed()
>> +*/
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> DP_MAINLINK_FB_BOUNDARY_SEL);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> DP_MAINLINK_FB_BOUNDARY_SEL);
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
>> +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
>> +} else {
>> +mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
>> +mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
>> +dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
>> +}
>> +}
>> +
>> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
>> +u32 colorimetry_cfg, u32 test_bits_depth)
>> +{
>> +u32 misc_val;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
>> +misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
>> +misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
>> +/* Configure clock to synchronous mode */
>> +misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
>> +
>> +DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
>> +dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
>> +}
>> +
>> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
>> +u32 rate, u32 stream_rate_khz,
>> +bool fixed_nvid)
>> +{
>> +u32 pixel_m, pixel_n;
>> +u32 mvid, nvid;
>> +u64 mvid_calc;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (fixed_nvid) {
>> +nvid = DP_LINK_CONSTANT_N_VALUE;
>> +DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
>> +
>> +/*
>> + * For intermediate results, use 64 bit arithmetic to avoid
>> + * loss of precision.
>> + */
>> +mvid_calc = (u64) stream_rate_khz * nvid;
>> +mvid_calc = div_u64(mvid_calc, rate);
>> +
>> +/*
>> + * truncate back to 32 bits as this final divided value will
>> + * always be within the range of a 32 bit unsigned int.
>> + */
>> +mvid = (u32) mvid_calc;
>> +DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
>> +rate, stream_rate_khz);
>> +} else {
>> +pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
>> +pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
>> +DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
>> +
>> +mvid = (pixel_m & 0xFFFF) * 5;
>> +nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
>> +
>> +DRM_DEBUG_DP("rate = %d\n", rate);
>> +
>> +switch (drm_dp_link_rate_to_bw_code(rate)) {
>> +case DP_LINK_BW_5_4:
>> +nvid *= 2;
>> +break;
>> +case DP_LINK_BW_8_1:
>> +nvid *= 3;
>> +break;
>> +default:
>> +break;
>> +}
>> +}
>> +
>> +DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
>> +dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
>> +dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
>> +}
>> +
>> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern)
>> +{
>> +int bit, ret;
>> +u32 data;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +bit = BIT(pattern - 1);
>> +DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
>> +
>> +bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
>> +
>> +/* Poll for mainlink ready status */
>> +ret = readx_poll_timeout(readl, catalog->io->dp_link.base +
>> REG_DP_MAINLINK_READY,
>> + data, data & bit,
>> + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
>> +if (ret < 0) {
>> +DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
>> +return ret;
>> +}
>> +return 0;
>> +}
>> +
>> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
>> flip)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 typec_ctrl;
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
>> +USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
>> +USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
>> +USB3_DP_COM_PHY_MODE_DP);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
>> +USB3_DP_COM_SW_RESET_SET);
>> +
>> +/* Default configuration i.e CC1 */
>> +typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
>> +if (flip)
>> +typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
>> +
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
>> +USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
>> +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
>> +
>> +}
>> +
>> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
>> +{
>> +u32 sw_reset;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +void __iomem *base;
>> +
>> +base = catalog->io->dp_ahb.base;
>> +
>> +sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
>> +
>> +sw_reset |= DP_SW_RESET;
>> +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +
>> +sw_reset &= ~DP_SW_RESET;
>> +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
>> +}
>> +
>> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
>> +{
>> +u32 data;
>> +int ret;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +/* Poll for mainlink ready status */
>> +ret = readx_poll_timeout(readl,
>> + catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
>> + data, data & DP_MAINLINK_READY_FOR_VIDEO,
>> + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
>> +if (ret < 0) {
>> +DRM_ERROR("mainlink not ready\n");
>> +return false;
>> +}
>> +
>> +return true;
>> +}
>> +
>> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
>> +bool enable)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +void __iomem *base;
>> +
>> +base = catalog->io->dp_ahb.base;
>> +
>> +if (enable) {
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS,
>> DP_INTERRUPT_STATUS1_MASK);
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2,
>> DP_INTERRUPT_STATUS2_MASK);
>> +} else {
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
>> +}
>> +}
>> +
>> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
>> en)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +if (en) {
>> +u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
>> +
>> +dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
>> +DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
>> +DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
>> +dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
>> +DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
>> +DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
>> +
>> +/* Configure REFTIMER */
>> +reftimer |= REFTIMER_DEFAULT_VALUE;
>> +dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
>> +/* Enable HPD */
>> +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
>> +} else {
>> +/* Disable HPD */
>> +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
>> +}
>> +}
>> +
>> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 intr, intr_ack;
>> +
>> +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
>> +intr &= ~DP_INTERRUPT_STATUS2_MASK;
>> +intr_ack = (intr & DP_INTERRUPT_STATUS2) <<
>> DP_INTERRUPT_STATUS_ACK_SHIFT;
>> +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack |
>> DP_INTERRUPT_STATUS2_MASK);
>> +
>> +return intr;
>> +}
>> +
>> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_ahb(catalog, REG_DP_PHY_CTRL,
>> +DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
>> +usleep_range(1000, 1100); /* h/w recommended delay */
>> +dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
>> +}
>> +
>> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
>> +bool flipped, u8 ln_cnt)
>> +{
>> +u32 info;
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u8 orientation = BIT(!!flipped);
>> +
>> +info = ln_cnt & DP_PHY_SPARE0_MASK;
>> +info |= (orientation & DP_PHY_SPARE0_MASK) <<
>> DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
>> +DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
>> +
>> +dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
>> +}
>> +
>> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
>> +u8 v_level, u8 p_level)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u8 voltage_swing_cfg, pre_emphasis_cfg;
>> +
>> +DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
>> +
>> +voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
>> +pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
>> +
>> +if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
>> +DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
>> +v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
>> +return -EINVAL;
>> +}
>> +
>> +/* Enable MUX to use Cursor values from these registers */
>> +voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
>> +pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
>> +
>> +/* Configure host and panel only if both values are allowed */
>> +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
>> voltage_swing_cfg);
>> +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
>> voltage_swing_cfg);
>> +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
>> pre_emphasis_cfg);
>> +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
>> pre_emphasis_cfg);
>> +DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
>> +voltage_swing_cfg, pre_emphasis_cfg);
>> +
>> +return 0;
>> +}
>> +
>> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 value = 0x0;
>> +
>> +/* Make sure to clear the current pattern before starting a new one
>> */
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
>> +
>> +switch (pattern) {
>> +case DP_LINK_QUAL_PATTERN_D10_2:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_PRBS7:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
>> +/* 00111110000011111000001111100000 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0,
>> 0x3E0F83E0);
>> +/* 00001111100000111110000011111000 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1,
>> 0x0F83E0F8);
>> +/* 1111100000111110 */
>> +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2,
>> 0x0000F83E);
>> +return;
>> +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
>> +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
>> +value &= ~DP_HBR2_ERM_PATTERN;
>> +if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
>> +value = DP_HBR2_ERM_PATTERN;
>> +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
>> value);
>> +value |= SCRAMBLER_RESET_COUNT_VALUE;
>> +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
>> value);
>> +dp_write_link(catalog, REG_DP_MAINLINK_LEVELS,
>> DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
>> +dp_write_link(catalog, REG_DP_STATE_CTRL,
>> DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
>> +return;
>> +default:
>> +DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
>> +return;
>> +}
>> +}
>> +
>> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +return dp_read_link(catalog, REG_DP_MAINLINK_READY);
>> +}
>> +
>> +/* panel related catalog functions */
>> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
>> +dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC,
>> dp_catalog->sync_start);
>> +dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY,
>> dp_catalog->width_blanking);
>> +dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
>> +return 0;
>> +}
>> +
>> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
>> +struct drm_display_mode *drm_mode)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +u32 hsync_period, vsync_period;
>> +u32 display_v_start, display_v_end;
>> +u32 hsync_start_x, hsync_end_x;
>> +u32 v_sync_width;
>> +u32 hsync_ctl;
>> +u32 display_hctl;
>> +
>> +/* TPG config parameters*/
>> +hsync_period = drm_mode->htotal;
>> +vsync_period = drm_mode->vtotal;
>> +
>> +display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
>> +hsync_period);
>> +display_v_end = ((vsync_period - drm_mode->vsync_start -
>> +drm_mode->vdisplay) * hsync_period) - 1;
>> +
>> +display_v_start += drm_mode->htotal - drm_mode->hsync_start;
>> +display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
>> +
>> +hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
>> +hsync_end_x = hsync_period - drm_mode->hsync_start -
>> +drm_mode->hdisplay - 1;
>> +
>> +v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
>> +
>> +hsync_ctl = (hsync_period << 16) |
>> +(drm_mode->hsync_end - drm_mode->hsync_start);
>> +display_hctl = (hsync_end_x << 16) | hsync_start_x;
>> +
>> +
>> +dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
>> +hsync_period);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width
>> *
>> +hsync_period);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
>> +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
>> +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
>> +dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
>> +
>> +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL,
>> DP_TPG_CHECKERED_RECT_PATTERN);
>> +dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
>> +DP_TPG_VIDEO_CONFIG_BPP_8BIT |
>> +DP_TPG_VIDEO_CONFIG_RGB);
>> +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
>> +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN,
>> DP_TIMING_ENGINE_EN_EN);
>> +DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
>> +}
>> +
>> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +struct dp_catalog_private, dp_catalog);
>> +
>> +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
>> +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
>> +return;
>> +}
>> +
>> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
>> *io)
>> +{
>> +int rc = 0;
>> +struct dp_catalog *dp_catalog;
>> +struct dp_catalog_private *catalog;
>> +
>> +if (!io) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
>> +if (!catalog) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +catalog->dev = dev;
>> +catalog->io = io;
>> +
>> +dp_catalog = &catalog->dp_catalog;
>> +
>> +return dp_catalog;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_catalog_put(struct dp_catalog *dp_catalog)
>> +{
>> +struct dp_catalog_private *catalog;
>> +
>> +if (!dp_catalog)
>> +return;
>> +
>> +catalog = container_of(dp_catalog, struct dp_catalog_private,
>> +dp_catalog);
>> +
>> +devm_kfree(catalog->dev, catalog);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> new file mode 100644
>> index 0000000..51c82dd
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> @@ -0,0 +1,84 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_CATALOG_H_
>> +#define _DP_CATALOG_H_
>> +
>> +#include "dp_parser.h"
>> +
>> +/* interrupts */
>> +#define DP_INTR_HPDBIT(0)
>> +#define DP_INTR_AUX_I2C_DONEBIT(3)
>> +#define DP_INTR_WRONG_ADDRBIT(6)
>> +#define DP_INTR_TIMEOUTBIT(9)
>> +#define DP_INTR_NACK_DEFERBIT(12)
>> +#define DP_INTR_WRONG_DATA_CNTBIT(15)
>> +#define DP_INTR_I2C_NACKBIT(18)
>> +#define DP_INTR_I2C_DEFERBIT(21)
>> +#define DP_INTR_PLL_UNLOCKEDBIT(24)
>> +#define DP_INTR_AUX_ERRORBIT(27)
>> +
>> +#define DP_INTR_READY_FOR_VIDEOBIT(0)
>> +#define DP_INTR_IDLE_PATTERN_SENTBIT(3)
>> +#define DP_INTR_FRAME_ENDBIT(6)
>> +#define DP_INTR_CRC_UPDATEDBIT(9)
>> +
>> +struct dp_catalog {
>> +u32 aux_data;
>> +u32 total;
>> +u32 sync_start;
>> +u32 width_blanking;
>> +u32 dp_active;
>> +};
>> +
>> +/* AUX APIs */
>> +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
>> read);
>> +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
>> +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
>> +struct dp_aux_cfg *aux_cfg);
>> +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>> +
>> +/* DP Controller APIs */
>> +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state);
>> +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
>> config);
>> +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog, 
>> bool
>> enable);
>> +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32
>> cc, u32 tb);
>> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32
>> rate,
>> +u32 stream_rate_khz, bool fixed_nvid);
>> +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32
>> pattern);
>> +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
>> flip);
>> +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
>> enable);
>> +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool
>> flipped,
>> +u8 lane_cnt);
>> +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8
>> v_level,
>> +u8 p_level);
>> +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
>> +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
>> *dp_catalog,
>> +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
>> +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
>> +u32 pattern);
>> +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
>> +
>> +/* DP Panel APIs */
>> +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
>> +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
>> +struct drm_display_mode *drm_mode);
>> +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
>> +
>> +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
>> *io);
>> +void dp_catalog_put(struct dp_catalog *catalog);
>> +
>> +#endif /* _DP_CATALOG_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> new file mode 100644
>> index 0000000..a4575ea
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> @@ -0,0 +1,1590 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/types.h>
>> +#include <linux/completion.h>
>> +#include <linux/delay.h>
>> +#include <drm/drm_fixed.h>
>> +
>> +#include "dp_reg.h"
>> +#include "dp_ctrl.h"
>> +
>> +#define DP_KHZ_TO_HZ 1000
>> +#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES(30 * HZ / 1000) /* 30
>> ms */
>> +#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
>> +
>> +#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
>> +#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
>> +
>> +#define MR_LINK_TRAINING1  0x8
>> +#define MR_LINK_SYMBOL_ERM 0x80
>> +#define MR_LINK_PRBS7 0x100
>> +#define MR_LINK_CUSTOM80 0x200
>> +
>> +struct dp_tu_calc_input {
>> +u64 lclk;        /* 162, 270, 540 and 810 */
>> +u64 pclk_khz;    /* in KHz */
>> +u64 hactive;     /* active h-width */
>> +u64 hporch;      /* bp + fp + pulse */
>> +int nlanes;      /* no.of.lanes */
>> +int bpp;         /* bits */
>> +int pixel_enc;   /* 444, 420, 422 */
>> +int dsc_en;     /* dsc on/off */
>> +int async_en;   /* async mode */
>> +};
>> +
>> +struct dp_vc_tu_mapping_table {
>> +u8 valid_boundary_link;
>> +u16 delay_start_link;
>> +bool boundary_moderation_en;
>> +u8 valid_lower_boundary_link;
>> +u8 upper_boundary_count;
>> +u8 lower_boundary_count;
>> +u8 tu_size_minus1;
>> +};
>> +
>> +struct dp_ctrl_private {
>> +struct dp_ctrl dp_ctrl;
>> +
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_panel *panel;
>> +struct dp_link *link;
>> +struct dp_power *power;
>> +struct dp_parser *parser;
>> +struct dp_catalog *catalog;
>> +
>> +struct completion idle_comp;
>> +struct mutex push_idle_mutex;
>> +struct completion video_comp;
>> +};
>> +
>> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +mutex_lock(&ctrl->push_idle_mutex);
>> +
>> +reinit_completion(&ctrl->idle_comp);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
>> +
>> +if (!wait_for_completion_timeout(&ctrl->idle_comp,
>> +IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
>> +pr_warn("PUSH_IDLE pattern timedout\n");
>> +
>> +mutex_unlock(&ctrl->push_idle_mutex);
>> +pr_debug("mainlink off done\n");
>> +}
>> +
>> +static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
>> +{
>> +u32 config = 0, tbd;
>> +u8 *dpcd = ctrl->panel->dpcd;
>> +
>> +/* Default-> LSCLK DIV: 1/4 LCLK  */
>> +config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
>> +
>> +/* Scrambler reset enable */
>> +if (dpcd[DP_EDP_CONFIGURATION_CAP] &
>> DP_ALTERNATE_SCRAMBLER_RESET_CAP)
>> +config |= DP_CONFIGURATION_CTRL_ASSR;
>> +
>> +tbd = dp_link_get_test_bits_depth(ctrl->link,
>> +ctrl->panel->dp_mode.bpp);
>> +
>> +if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
>> +pr_debug("BIT_DEPTH not set. Configure default\n");
>> +tbd = DP_TEST_BIT_DEPTH_8;
>> +}
>> +
>> +config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
>> +
>> +/* Num of Lanes */
>> +config |= ((ctrl->link->link_params.num_lanes - 1)
>> +<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
>> +
>> +if (drm_dp_enhanced_frame_cap(dpcd))
>> +config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
>> +
>> +config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
>> +
>> +/* sync clock & static Mvid */
>> +config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
>> +config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
>> +
>> +dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
>> +}
>> +
>> +/**
>> + * dp_ctrl_configure_source_params() - configures DP transmitter
>> source params
>> + * @ctrl: Display Port Driver data
>> + *
>> + * Configures the DP transmitter source params including details such
>> as lane
>> + * configuration, output format and sink/panel timing information.
>> + */
>> +static void dp_ctrl_configure_source_params(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +u32 cc, tb;
>> +
>> +dp_catalog_ctrl_lane_mapping(ctrl->catalog);
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
>> +
>> +dp_ctrl_config_ctrl(ctrl);
>> +
>> +tb = dp_link_get_test_bits_depth(ctrl->link,
>> +ctrl->panel->dp_mode.bpp);
>> +cc = dp_link_get_colorimetry_config(ctrl->link);
>> +dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
>> +dp_panel_timing_cfg(ctrl->panel);
>> +}
>> +
>> +/*
>> + * The structure and few functions present below are IP/Hardware
>> + * specific implementation. Most of the implementation will not
>> + * have coding comments
>> + */
>> +struct tu_algo_data {
>> +s64 lclk_fp;
>> +s64 pclk_fp;
>> +s64 lwidth;
>> +s64 hbp_relative_to_pclk;
>> +int nlanes;
>> +int bpp;
>> +int pixelEnc;
>> +int dsc_en;
>> +int async_en;
>> +int bpc;
>> +
>> +uint delay_start_link_extra_pixclk;
>> +int extra_buffer_margin;
>> +s64 ratio_fp;
>> +s64 original_ratio_fp;
>> +
>> +s64 err_fp;
>> +s64 n_err_fp;
>> +s64 n_n_err_fp;
>> +int tu_size;
>> +int tu_size_desired;
>> +int tu_size_minus1;
>> +
>> +int valid_boundary_link;
>> +s64 resulting_valid_fp;
>> +s64 total_valid_fp;
>> +s64 effective_valid_fp;
>> +s64 effective_valid_recorded_fp;
>> +int n_tus;
>> +int n_tus_per_lane;
>> +int paired_tus;
>> +int remainder_tus;
>> +int remainder_tus_upper;
>> +int remainder_tus_lower;
>> +int extra_bytes;
>> +int filler_size;
>> +int delay_start_link;
>> +
>> +int extra_pclk_cycles;
>> +int extra_pclk_cycles_in_link_clk;
>> +s64 ratio_by_tu_fp;
>> +s64 average_valid2_fp;
>> +int new_valid_boundary_link;
>> +int remainder_symbols_exist;
>> +int n_symbols;
>> +s64 n_remainder_symbols_per_lane_fp;
>> +s64 last_partial_tu_fp;
>> +s64 TU_ratio_err_fp;
>> +
>> +int n_tus_incl_last_incomplete_tu;
>> +int extra_pclk_cycles_tmp;
>> +int extra_pclk_cycles_in_link_clk_tmp;
>> +int extra_required_bytes_new_tmp;
>> +int filler_size_tmp;
>> +int lower_filler_size_tmp;
>> +int delay_start_link_tmp;
>> +
>> +bool boundary_moderation_en;
>> +int boundary_mod_lower_err;
>> +int upper_boundary_count;
>> +int lower_boundary_count;
>> +int i_upper_boundary_count;
>> +int i_lower_boundary_count;
>> +int valid_lower_boundary_link;
>> +int even_distribution_BF;
>> +int even_distribution_legacy;
>> +int even_distribution;
>> +int min_hblank_violated;
>> +s64 delay_start_time_fp;
>> +s64 hbp_time_fp;
>> +s64 hactive_time_fp;
>> +s64 diff_abs_fp;
>> +
>> +s64 ratio;
>> +};
>> +
>> +static int _tu_param_compare(s64 a, s64 b)
>> +{
>> +u32 a_int, a_frac;
>> +u32 b_int, b_frac;
>> +
>> +if (a == b)
>> +return 0;
>> +
>> +a_int = (a >> 32) & 0x7FFFFFFF;
>> +a_frac = a & 0xFFFFFFFF;
>> +
>> +b_int = (b >> 32) & 0x7FFFFFFF;
>> +b_frac = b & 0xFFFFFFFF;
>> +
>> +if (a_int > b_int)
>> +return 1;
>> +else if (a_int < b_int)
>> +return 2;
>> +else if (a_frac > b_frac)
>> +return 1;
>> +else
>> +return 2;
>> +}
>> +
>> +static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
>> +{
>> +s64 temp1_fp, temp2_fp, temp, temp1, temp2;
>> +int compare_result_1, compare_result_2, compare_result_3;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +
>> +tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
>> +
>> +temp = (tu->i_upper_boundary_count *
>> +tu->new_valid_boundary_link +
>> +tu->i_lower_boundary_count *
>> +(tu->new_valid_boundary_link-1));
>> +tu->average_valid2_fp = drm_fixp_from_fraction(temp,
>> +(tu->i_upper_boundary_count +
>> +tu->i_lower_boundary_count));
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
>> +tu->n_tus = drm_fixp2int(temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu->n_remainder_symbols_per_lane_fp = temp2_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +tu->last_partial_tu_fp =
>> +drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
>> +temp1_fp);
>> +
>> +if (tu->n_remainder_symbols_per_lane_fp != 0)
>> +tu->remainder_symbols_exist = 1;
>> +else
>> +tu->remainder_symbols_exist = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
>> +tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
>> +
>> +tu->paired_tus = (int)((tu->n_tus_per_lane) /
>> +(tu->i_upper_boundary_count +
>> + tu->i_lower_boundary_count));
>> +
>> +tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
>> +(tu->i_upper_boundary_count +
>> +tu->i_lower_boundary_count);
>> +
>> +if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
>> +tu->remainder_tus_upper = tu->i_upper_boundary_count;
>> +tu->remainder_tus_lower = tu->remainder_tus -
>> +tu->i_upper_boundary_count;
>> +} else {
>> +tu->remainder_tus_upper = tu->remainder_tus;
>> +tu->remainder_tus_lower = 0;
>> +}
>> +
>> +temp = tu->paired_tus * (tu->i_upper_boundary_count *
>> +tu->new_valid_boundary_link +
>> +tu->i_lower_boundary_count *
>> +(tu->new_valid_boundary_link - 1)) +
>> +(tu->remainder_tus_upper *
>> + tu->new_valid_boundary_link) +
>> +(tu->remainder_tus_lower *
>> +(tu->new_valid_boundary_link - 1));
>> +tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
>> +
>> +if (tu->remainder_symbols_exist) {
>> +temp1_fp = tu->total_valid_fp +
>> +tu->n_remainder_symbols_per_lane_fp;
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
>> +temp2_fp = temp2_fp + tu->last_partial_tu_fp;
>> +temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
>> +} else {
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
>> +temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
>> +}
>> +tu->effective_valid_fp = temp1_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
>> +tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
>> +
>> +tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
>> +
>> +if (temp2_fp)
>> +tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +tu->n_tus_incl_last_incomplete_tu = 0;
>> +
>> +temp1 = 0;
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
>> +temp1_fp = tu->average_valid2_fp - temp2_fp;
>> +temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu,
>> 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +temp1 = drm_fixp2int_ceil(temp1_fp);
>> +
>> +temp = tu->i_upper_boundary_count * tu->nlanes;
>> +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +if (temp2_fp)
>> +temp2 = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +temp2 = 0;
>> +tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
>> +
>> +temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
>> +temp2_fp = drm_fixp_from_fraction(
>> +tu->extra_required_bytes_new_tmp, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu->extra_pclk_cycles_tmp = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
>> +temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
>> +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +if (temp1_fp)
>> +tu->extra_pclk_cycles_in_link_clk_tmp =
>> +drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu->extra_pclk_cycles_in_link_clk_tmp = 0;
>> +
>> +tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
>> +
>> +tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
>> +
>> +tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
>> +tu->lower_filler_size_tmp +
>> +tu->extra_buffer_margin;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
>> +tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
>> +
>> +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
>> tu->diff_abs_fp);
>> +if (compare_result_1 == 2)
>> +compare_result_1 = 1;
>> +else
>> +compare_result_1 = 0;
>> +
>> +compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
>> +if (compare_result_2 == 2)
>> +compare_result_2 = 1;
>> +else
>> +compare_result_2 = 0;
>> +
>> +compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
>> +tu->delay_start_time_fp);
>> +if (compare_result_3 == 2)
>> +compare_result_3 = 0;
>> +else
>> +compare_result_3 = 1;
>> +
>> +if (((tu->even_distribution == 1) ||
>> +((tu->even_distribution_BF == 0) &&
>> +(tu->even_distribution_legacy == 0))) &&
>> +tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
>> +compare_result_2 &&
>> +(compare_result_1 || (tu->min_hblank_violated == 1)) &&
>> +(tu->new_valid_boundary_link - 1) > 0 &&
>> +compare_result_3 &&
>> +(tu->delay_start_link_tmp <= 1023)) {
>> +tu->upper_boundary_count = tu->i_upper_boundary_count;
>> +tu->lower_boundary_count = tu->i_lower_boundary_count;
>> +tu->err_fp = tu->n_n_err_fp;
>> +tu->boundary_moderation_en = true;
>> +tu->tu_size_desired = tu->tu_size;
>> +tu->valid_boundary_link = tu->new_valid_boundary_link;
>> +tu->effective_valid_recorded_fp = tu->effective_valid_fp;
>> +tu->even_distribution_BF = 1;
>> +tu->delay_start_link = tu->delay_start_link_tmp;
>> +} else if (tu->boundary_mod_lower_err == 0) {
>> +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
>> +tu->diff_abs_fp);
>> +if (compare_result_1 == 2)
>> +tu->boundary_mod_lower_err = 1;
>> +}
>> +}
>> +
>> +static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
>> +   struct dp_vc_tu_mapping_table *tu_table)
>> +{
>> +struct tu_algo_data tu;
>> +int compare_result_1, compare_result_2;
>> +u64 temp = 0;
>> +s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
>> +
>> +s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006
>> */
>> +s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
>> +s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
>> +s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
>> +
>> +u8 DP_BRUTE_FORCE = 1;
>> +s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1
>> */
>> +uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
>> +uint HBLANK_MARGIN = 4;
>> +
>> +memset(&tu, 0, sizeof(tu));
>> +
>> +tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
>> +tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
>> +tu.lwidth               = in->hactive;
>> +tu.hbp_relative_to_pclk = in->hporch;
>> +tu.nlanes               = in->nlanes;
>> +tu.bpp                  = in->bpp;
>> +tu.pixelEnc             = in->pixel_enc;
>> +tu.dsc_en               = in->dsc_en;
>> +tu.async_en             = in->async_en;
>> +
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
>> +
>> +if (tu.pixelEnc == 420) {
>> +temp_fp = drm_fixp_from_fraction(2, 1);
>> +tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
>> +tu.lwidth /= 2;
>> +tu.hbp_relative_to_pclk /= 2;
>> +}
>> +
>> +if (tu.pixelEnc == 422) {
>> +switch (tu.bpp) {
>> +case 24:
>> +tu.bpp = 16;
>> +tu.bpc = 8;
>> +break;
>> +case 30:
>> +tu.bpp = 20;
>> +tu.bpc = 10;
>> +break;
>> +default:
>> +tu.bpp = 16;
>> +tu.bpc = 8;
>> +break;
>> +}
>> +} else {
>> +tu.bpc = tu.bpp/3;
>> +}
>> +
>> +temp1_fp = drm_fixp_from_fraction(4, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
>> +temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
>> +tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
>> +
>> +tu.original_ratio_fp = tu.ratio_fp;
>> +tu.boundary_moderation_en = false;
>> +tu.upper_boundary_count = 0;
>> +tu.lower_boundary_count = 0;
>> +tu.i_upper_boundary_count = 0;
>> +tu.i_lower_boundary_count = 0;
>> +tu.valid_lower_boundary_link = 0;
>> +tu.even_distribution_BF = 0;
>> +tu.even_distribution_legacy = 0;
>> +tu.even_distribution = 0;
>> +tu.delay_start_time_fp = 0;
>> +
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1);
>> +tu.n_err_fp = 0;
>> +tu.n_n_err_fp = 0;
>> +
>> +tu.ratio = drm_fixp2int(tu.ratio_fp);
>> +if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
>> +!tu.ratio && tu.dsc_en == 0) {
>> +tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
>> +tu.ratio = drm_fixp2int(tu.ratio_fp);
>> +if (tu.ratio)
>> +tu.ratio_fp = drm_fixp_from_fraction(1, 1);
>> +}
>> +
>> +if (tu.ratio > 1)
>> +tu.ratio = 1;
>> +
>> +if (tu.ratio == 1)
>> +goto tu_size_calc;
>> +
>> +compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
>> +if (!compare_result_1 || compare_result_1 == 1)
>> +compare_result_1 = 1;
>> +else
>> +compare_result_1 = 0;
>> +
>> +compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
>> +if (!compare_result_2 || compare_result_2 == 2)
>> +compare_result_2 = 1;
>> +else
>> +compare_result_2 = 0;
>> +
>> +if (tu.dsc_en && compare_result_1 && compare_result_2) {
>> +HBLANK_MARGIN += 4;
>> +DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
>> +}
>> +
>> +tu_size_calc:
>> +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
>> +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +temp = drm_fixp2int_ceil(temp2_fp);
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +tu.n_err_fp = temp1_fp - temp2_fp;
>> +
>> +if (tu.n_err_fp < tu.err_fp) {
>> +tu.err_fp = tu.n_err_fp;
>> +tu.tu_size_desired = tu.tu_size;
>> +}
>> +}
>> +
>> +tu.tu_size_minus1 = tu.tu_size_desired - 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
>> +tu.n_tus = drm_fixp2int(temp2_fp);
>> +
>> +tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
>> +DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
>> +tu.valid_boundary_link, tu.n_tus);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +temp2_fp = temp1_fp - temp2_fp;
>> +temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +temp = drm_fixp2int(temp2_fp);
>> +if (temp && temp2_fp)
>> +tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +tu.extra_bytes = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
>> +temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
>> +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +
>> +temp = drm_fixp2int(temp1_fp);
>> +if (temp && temp1_fp)
>> +tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_pclk_cycles = 0;
>> +
>> +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
>> +temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +temp = drm_fixp2int(temp1_fp);
>> +if (temp && temp1_fp)
>> +tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_pclk_cycles_in_link_clk = 0;
>> +
>> +tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
>> +
>> +tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
>> +tu.filler_size + tu.extra_buffer_margin;
>> +
>> +tu.resulting_valid_fp =
>> +drm_fixp_from_fraction(tu.valid_boundary_link, 1);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
>> +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(
>> +(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
>> +tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
>> +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
>> +
>> +compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
>> +tu.delay_start_time_fp);
>> +if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp)
>> */
>> +tu.min_hblank_violated = 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
>> +
>> +compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
>> +tu.delay_start_time_fp);
>> +if (compare_result_2 == 2)
>> +tu.min_hblank_violated = 1;
>> +
>> +tu.delay_start_time_fp = 0;
>> +
>> +/* brute force */
>> +
>> +tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
>> +tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
>> +
>> +temp = drm_fixp2int(tu.diff_abs_fp);
>> +if (!temp && tu.diff_abs_fp <= 0xffff)
>> +tu.diff_abs_fp = 0;
>> +
>> +/* if(diff_abs < 0) diff_abs *= -1 */
>> +if (tu.diff_abs_fp < 0)
>> +tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
>> +
>> +tu.boundary_mod_lower_err = 0;
>> +if ((tu.diff_abs_fp != 0 &&
>> +((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
>> + (tu.even_distribution_legacy == 0) ||
>> + (DP_BRUTE_FORCE == 1))) ||
>> +(tu.min_hblank_violated == 1)) {
>> +do {
>> +tu.err_fp = drm_fixp_from_fraction(1000, 1);
>> +
>> +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
>> +temp2_fp = drm_fixp_from_fraction(
>> +tu.delay_start_link_extra_pixclk, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu.extra_buffer_margin =
>> +drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.extra_buffer_margin = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +
>> +if (temp1_fp)
>> +tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
>> +else
>> +tu.n_symbols = 0;
>> +
>> +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
>> +for (tu.i_upper_boundary_count = 1;
>> +tu.i_upper_boundary_count <= 15;
>> +tu.i_upper_boundary_count++) {
>> +for (tu.i_lower_boundary_count = 1;
>> +tu.i_lower_boundary_count <= 15;
>> +tu.i_lower_boundary_count++) {
>> +_tu_valid_boundary_calc(&tu);
>> +}
>> +}
>> +}
>> +tu.delay_start_link_extra_pixclk--;
>> +} while (tu.boundary_moderation_en != true &&
>> +tu.boundary_mod_lower_err == 1 &&
>> +tu.delay_start_link_extra_pixclk != 0);
>> +
>> +if (tu.boundary_moderation_en == true) {
>> +temp1_fp = drm_fixp_from_fraction(
>> +(tu.upper_boundary_count *
>> +tu.valid_boundary_link +
>> +tu.lower_boundary_count *
>> +(tu.valid_boundary_link - 1)), 1);
>> +temp2_fp = drm_fixp_from_fraction(
>> +(tu.upper_boundary_count +
>> +tu.lower_boundary_count), 1);
>> +tu.resulting_valid_fp =
>> +drm_fixp_div(temp1_fp, temp2_fp);
>> +
>> +temp1_fp = drm_fixp_from_fraction(
>> +tu.tu_size_desired, 1);
>> +tu.ratio_by_tu_fp =
>> +drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +
>> +tu.valid_lower_boundary_link =
>> +tu.valid_boundary_link - 1;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
>> +temp2_fp = drm_fixp_div(temp1_fp,
>> +tu.resulting_valid_fp);
>> +tu.n_tus = drm_fixp2int(temp2_fp);
>> +
>> +tu.tu_size_minus1 = tu.tu_size_desired - 1;
>> +tu.even_distribution_BF = 1;
>> +
>> +temp1_fp =
>> +drm_fixp_from_fraction(tu.tu_size_desired, 1);
>> +temp2_fp =
>> +drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
>> +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
>> +}
>> +}
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
>> +temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
>> +
>> +if (temp2_fp)
>> +temp = drm_fixp2int_ceil(temp2_fp);
>> +else
>> +temp = 0;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
>> +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
>> +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
>> +temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
>> +temp1_fp = drm_fixp_from_fraction(temp, 1);
>> +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
>> +temp = drm_fixp2int(temp2_fp);
>> +
>> +if (tu.async_en)
>> +tu.delay_start_link += (int)temp;
>> +
>> +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
>> +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
>> +
>> +/* OUTPUTS */
>> +tu_table->valid_boundary_link       = tu.valid_boundary_link;
>> +tu_table->delay_start_link          = tu.delay_start_link;
>> +tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
>> +tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
>> +tu_table->upper_boundary_count      = tu.upper_boundary_count;
>> +tu_table->lower_boundary_count      = tu.lower_boundary_count;
>> +tu_table->tu_size_minus1            = tu.tu_size_minus1;
>> +
>> +DRM_DEBUG_DP("TU: valid_boundary_link: %d\n",
>> tu_table->valid_boundary_link);
>> +DRM_DEBUG_DP("TU: delay_start_link: %d\n",
>> tu_table->delay_start_link);
>> +DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
>> +tu_table->boundary_moderation_en);
>> +DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
>> +tu_table->valid_lower_boundary_link);
>> +DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
>> +tu_table->upper_boundary_count);
>> +DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
>> +tu_table->lower_boundary_count);
>> +DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
>> +}
>> +
>> +static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
>> +struct dp_vc_tu_mapping_table *tu_table)
>> +{
>> +struct dp_tu_calc_input in;
>> +struct drm_display_mode *drm_mode;
>> +
>> +drm_mode = &ctrl->panel->dp_mode.drm_mode;
>> +
>> +in.lclk = ctrl->link->link_params.rate / 1000;
>> +in.pclk_khz = drm_mode->clock;
>> +in.hactive = drm_mode->hdisplay;
>> +in.hporch = drm_mode->htotal - drm_mode->hdisplay;
>> +in.nlanes = ctrl->link->link_params.num_lanes;
>> +in.bpp = ctrl->panel->dp_mode.bpp;
>> +in.pixel_enc = 444;
>> +in.dsc_en = 0;
>> +in.async_en = 0;
>> +
>> +_dp_ctrl_calc_tu(&in, tu_table);
>> +}
>> +
>> +static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
>> +{
>> +u32 dp_tu = 0x0;
>> +u32 valid_boundary = 0x0;
>> +u32 valid_boundary2 = 0x0;
>> +struct dp_vc_tu_mapping_table tu_calc_table;
>> +
>> +dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
>> +
>> +dp_tu |= tu_calc_table.tu_size_minus1;
>> +valid_boundary |= tu_calc_table.valid_boundary_link;
>> +valid_boundary |= (tu_calc_table.delay_start_link << 16);
>> +
>> +valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
>> +valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
>> +valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
>> +
>> +if (tu_calc_table.boundary_moderation_en)
>> +valid_boundary2 |= BIT(0);
>> +
>> +pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
>> +dp_tu, valid_boundary, valid_boundary2);
>> +
>> +dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
>> +dp_tu, valid_boundary, valid_boundary2);
>> +}
>> +
>> +static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +if (!wait_for_completion_timeout(&ctrl->video_comp,
>> +WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
>> +DRM_ERROR("Link Train timedout\n");
>> +ret = -ETIMEDOUT;
>> +}
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
>> +{
>> +struct dp_link *link = ctrl->link;
>> +int ret = 0, lane, lane_cnt;
>> +u8 buf[4];
>> +u32 max_level_reached = 0;
>> +u32 voltage_swing_level = link->phy_params.v_level;
>> +u32 pre_emphasis_level = link->phy_params.p_level;
>> +
>> +ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
>> +voltage_swing_level, pre_emphasis_level);
>> +if (ret)
>> +return ret;
>> +
>> +if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_DEBUG_DP("max. voltage swing level reached %d\n",
>> +voltage_swing_level);
>> +max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
>> +}
>> +
>> +if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
>> +DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
>> +pre_emphasis_level);
>> +max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
>> +}
>> +
>> +pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
>> +
>> +lane_cnt = ctrl->link->link_params.num_lanes;
>> +for (lane = 0; lane < lane_cnt; lane++)
>> +buf[lane] = voltage_swing_level | pre_emphasis_level |
>> max_level_reached;
>> +
>> +DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level |
>> pre_emphasis_level);
>> +ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET,
>> buf, lane_cnt);
>> +if (ret == lane_cnt)
>> +ret = 0;
>> +
>> +return ret;
>> +}
>> +
>> +static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
>> +u8 pattern)
>> +{
>> +u8 buf;
>> +int ret = 0;
>> +
>> +DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
>> +
>> +buf = pattern;
>> +ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET,
>> buf);
>> +return ret == 1;
>> +}
>> +
>> +static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
>> +    u8 *link_status)
>> +{
>> +int len = 0;
>> +u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
>> +u32 link_status_read_max_retries = 100;
>> +
>> +while (--link_status_read_max_retries) {
>> +len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
>> +link_status);
>> +if (len != DP_LINK_STATUS_SIZE) {
>> +DRM_ERROR("DP link status read failed, err: %d\n", len);
>> +return len;
>> +}
>> +
>> +if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
>> +return 0;
>> +}
>> +
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
>> +{
>> +int tries, old_v_level, ret = 0;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +int const maximum_retries = 5;
>> +
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog,
>> DP_TRAINING_PATTERN_1);
>> +if (ret)
>> +return ret;
>> +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
>> +DP_LINK_SCRAMBLING_DISABLE);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +tries = 0;
>> +old_v_level = ctrl->link->phy_params.v_level;
>> +for (tries = 0; tries < maximum_retries; tries++) {
>> +drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
>> +
>> +ret = dp_ctrl_read_link_status(ctrl, link_status);
>> +if (ret)
>> +return ret;
>> +
>> +if (drm_dp_clock_recovery_ok(link_status,
>> +ctrl->link->link_params.num_lanes)) {
>> +return ret;
>> +}
>> +
>> +if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_ERROR_RATELIMITED("max v_level reached\n");
>> +return -EAGAIN;
>> +}
>> +
>> +if (old_v_level != ctrl->link->phy_params.v_level) {
>> +tries = 0;
>> +old_v_level = ctrl->link->phy_params.v_level;
>> +}
>> +
>> +DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
>> +
>> +dp_link_adjust_levels(ctrl->link, link_status);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +}
>> +
>> +DRM_ERROR("max tries reached\n");
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +switch (ctrl->link->link_params.rate) {
>> +case 810000:
>> +ctrl->link->link_params.rate = 540000;
>> +break;
>> +case 540000:
>> +ctrl->link->link_params.rate = 270000;
>> +break;
>> +case 270000:
>> +case 162000:
>> +default:
>> +ctrl->link->link_params.rate = 162000;
>> +break;
>> +};
>> +
>> +DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
>> +
>> +return ret;
>> +}
>> +
>> +static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
>> +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
>> +}
>> +
>> +static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
>> +{
>> +int tries = 0, ret = 0;
>> +char pattern;
>> +int const maximum_retries = 5;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +if (drm_dp_tps3_supported(ctrl->panel->dpcd))
>> +pattern = DP_TRAINING_PATTERN_3;
>> +else
>> +pattern = DP_TRAINING_PATTERN_2;
>> +
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
>> +if (ret)
>> +return ret;
>> +
>> +dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
>> +
>> +for (tries = 0; tries <= maximum_retries; tries++) {
>> +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
>> +
>> +ret = dp_ctrl_read_link_status(ctrl, link_status);
>> +if (ret)
>> +return ret;
>> +
>> +if (drm_dp_channel_eq_ok(link_status,
>> +ctrl->link->link_params.num_lanes))
>> +return ret;
>> +
>> +dp_link_adjust_levels(ctrl->link, link_status);
>> +ret = dp_ctrl_update_vx_px(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +}
>> +
>> +return -ETIMEDOUT;
>> +}
>> +
>> +static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +u8 encoding = DP_SET_ANSI_8B10B;
>> +struct drm_dp_link link_info = {0};
>> +
>> +ctrl->link->phy_params.p_level = 0;
>> +ctrl->link->phy_params.v_level = 0;
>> +
>> +dp_ctrl_config_ctrl(ctrl);
>> +
>> +ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
>> +if (ret < 0) {
>> +DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +return ret;
>> +}
>> +
>> +drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
>> +drm_dp_dpcd_write(ctrl->aux->drm_aux,
>> DP_MAIN_LINK_CHANNEL_CODING_SET,
>> +&encoding, 1);
>> +
>> +ret = dp_ctrl_link_train_1(ctrl);
>> +if (ret) {
>> +DRM_ERROR("link training #1 failed. ret=%d\n", ret);
>> +goto end;
>> +}
>> +
>> +/* print success info as this is a result of user initiated action */
>> +DRM_DEBUG_DP("link training #1 successful\n");
>> +
>> +ret = dp_ctrl_link_training_2(ctrl);
>> +if (ret) {
>> +DRM_ERROR("link training #2 failed. ret=%d\n", ret);
>> +goto end;
>> +}
>> +
>> +/* print success info as this is a result of user initiated action */
>> +DRM_DEBUG_DP("link training #2 successful\n");
>> +
>> +end:
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
>> +
>> +dp_ctrl_clear_training_pattern(ctrl);
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool
>> train)
>> +{
>> +bool mainlink_ready = false;
>> +int ret = 0;
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
>> +
>> +ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
>> +if (ret)
>> +return ret;
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
>> +return ret;
>> +
>> +if (train) {
>> +/*
>> + * As part of previous calls, DP controller state might have
>> + * transitioned to PUSH_IDLE. In order to start transmitting a link
>> + * training pattern, we have to first do a DP software reset.
>> + */
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +
>> +ret = dp_ctrl_link_train(ctrl);
>> +if (ret)
>> +return ret;
>> +}
>> +
>> +/*
>> + * Set up transfer unit values and set controller state to send
>> + * video.
>> + */
>> +dp_ctrl_setup_tr_unit(ctrl);
>> +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
>> +
>> +ret = dp_ctrl_wait4video_ready(ctrl);
>> +if (ret)
>> +return ret;
>> +
>> +mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
>> +DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT
>> READY");
>> +return ret;
>> +}
>> +
>> +static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
>> +   char *name, u32 rate)
>> +{
>> +u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
>> +struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
>> +
>> +while (num && strcmp(cfg->clk_name, name)) {
>> +num--;
>> +cfg++;
>> +}
>> +
>> +DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
>> +
>> +if (num)
>> +cfg->rate = rate;
>> +else
>> +DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
>> +}
>> +
>> +static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +dp_power_set_link_clk_parent(ctrl->power);
>> +dp_power_set_pixel_clk_parent(ctrl->power);
>> +
>> +dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk",
>> ctrl->link->link_params.rate);
>> +
>> +dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk",
>> ctrl->dp_ctrl.pixel_rate);
>> +
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
>> +if (ret)
>> +DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
>> +
>> +return ret;
>> +}
>> +
>> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("Invalid input data\n");
>> +return -EINVAL;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +ctrl->dp_ctrl.orientation = flip;
>> +
>> +dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
>> +dp_catalog_ctrl_phy_reset(ctrl->catalog);
>> +dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_ctrl_host_deinit() - Uninitialize DP controller
>> + * @ctrl: Display Port Driver data
>> + *
>> + * Perform required steps to uninitialize DP controller
>> + * and its resources.
>> + */
>> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("Invalid input data\n");
>> +return;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
>> +
>> +DRM_DEBUG_DP("Host deinitialized successfully\n");
>> +}
>> +
>> +static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
>> +{
>> +u8 *dpcd = ctrl->panel->dpcd;
>> +
>> +/*
>> + * For better interop experience, used a fixed NVID=0x8000
>> + * whenever connected to a VGA dongle downstream.
>> + */
>> +if (drm_dp_is_branch(dpcd))
>> +return (drm_dp_has_quirk(&ctrl->panel->desc,
>> +DP_DPCD_QUIRK_CONSTANT_N));
>> +
>> +return false;
>> +}
>> +
>> +static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private 
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
>> +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
>> +/*
>> + * Disable and re-enable the mainlink clock since the
>> + * link clock might have been adjusted as part of the
>> + * link maintenance.
>> + */
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
>> +if (ret) {
>> +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +/* hw recommended delay before re-enabling clocks */
>> +msleep(20);
>> +
>> +ret = dp_ctrl_enable_mainlink_clocks(ctrl);
>> +if (ret) {
>> +DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +dp_ctrl_configure_source_params(ctrl);
>> +dp_catalog_ctrl_config_msa(ctrl->catalog,
>> +ctrl->link->link_params.rate,
>> +ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
>> +reinit_completion(&ctrl->idle_comp);
>> +
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
>> +{
>> +int ret = 0;
>> +int tries, max_tries = 10;
>> +
>> +dp_ctrl_push_idle(&ctrl->dp_ctrl);
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +
>> +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
>> +
>> +for (tries = 0; tries < max_tries; tries++) {
>> +ret = dp_ctrl_reinitialize_mainlink(ctrl);
>> +if (ret) {
>> +DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
>> +break;
>> +}
>> +
>> +ret = dp_ctrl_setup_main_link(ctrl, true);
>> +if (ret == -EAGAIN) /* try with lower link rate */
>> +dp_ctrl_link_rate_down_shift(ctrl);
>> +}
>> +return ret;
>> +}
>> +
>> +static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +int ret = 0;
>> +
>> +if (!ctrl->link->phy_params.phy_test_pattern_sel) {
>> +DRM_DEBUG_DP("no test pattern selected by sink\n");
>> +return ret;
>> +}
>> +
>> +dp_ctrl_push_idle(&ctrl->dp_ctrl);
>> +/*
>> + * The global reset will need DP link related clocks to be
>> + * running. Add the global reset just before disabling the
>> + * link clocks and core clocks.
>> + */
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +ret = dp_ctrl_off(&ctrl->dp_ctrl);
>> +if (ret) {
>> +DRM_ERROR("failed to disable DP controller\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_ctrl_on(&ctrl->dp_ctrl);
>> +if (ret)
>> +DRM_ERROR("failed to enable DP controller\n");
>> +
>> +return ret;
>> +}
>> +
>> +static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private
>> *ctrl)
>> +{
>> +bool success = false;
>> +u32 pattern_sent = 0x0;
>> +u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
>> +
>> +DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
>> +
>> +if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
>> +ctrl->link->phy_params.v_level,
>> +ctrl->link->phy_params.p_level)) {
>> +DRM_ERROR("Failed to set v/p levels\n");
>> +return false;
>> +}
>> +dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
>> +dp_link_send_test_response(ctrl->link);
>> +
>> +pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
>> +
>> +switch (pattern_sent) {
>> +case MR_LINK_TRAINING1:
>> +success = pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_D10_2;
>> +break;
>> +case MR_LINK_SYMBOL_ERM:
>> +success = (pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_ERROR_RATE)
>> +|| (pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_HBR2_EYE);
>> +break;
>> +case MR_LINK_PRBS7:
>> +success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
>> +break;
>> +case MR_LINK_CUSTOM80:
>> +success = pattern_requested ==
>> +DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
>> +break;
>> +default:
>> +success = false;
>> +}
>> +
>> +DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
>> +pattern_requested);
>> +return success;
>> +}
>> +
>> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +u32 sink_request = 0x0;
>> +
>> +if (!dp_ctrl) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +sink_request = ctrl->link->sink_request;
>> +
>> +if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
>> +if (dp_ctrl_process_phy_test_request(ctrl)) {
>> +DRM_ERROR("process phy_test_req failed\n");
>> +return;
>> +}
>> +}
>> +
>> +if (sink_request & DP_LINK_STATUS_UPDATED)
>> +if (dp_ctrl_link_maintenance(ctrl)) {
>> +DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
>> +return;
>> +}
>> +
>> +
>> +if (sink_request & DP_TEST_LINK_TRAINING) {
>> +dp_link_send_test_response(ctrl->link);
>> +if (dp_ctrl_link_maintenance(ctrl)) {
>> +DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
>> +return;
>> +}
>> +}
>> +}
>> +
>> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
>> +{
>> +int rc = 0;
>> +struct dp_ctrl_private *ctrl;
>> +u32 rate = 0;
>> +u32 link_train_max_retries = 10;
>> +u32 const phy_cts_pixel_clk_khz = 148500;
>> +
>> +if (!dp_ctrl)
>> +return -EINVAL;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +rate = ctrl->panel->link_info.rate;
>> +
>> +dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
>> +dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +DRM_DEBUG_DP("using phy test link parameters\n");
>> +if (!ctrl->panel->dp_mode.drm_mode.clock)
>> +ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
>> +} else {
>> +ctrl->link->link_params.rate = rate;
>> +ctrl->link->link_params.num_lanes =
>> +ctrl->panel->link_info.num_lanes;
>> +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
>> +}
>> +
>> +DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
>> +ctrl->link->link_params.rate,
>> +ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
>> +
>> +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
>> +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
>> +
>> +rc = dp_ctrl_enable_mainlink_clocks(ctrl);
>> +if (rc)
>> +return rc;
>> +
>> +while (--link_train_max_retries &&
>> !atomic_read(&ctrl->dp_ctrl.aborted)) {
>> +rc = dp_ctrl_reinitialize_mainlink(ctrl);
>> +if (rc) {
>> +DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
>> +break;
>> +}
>> +rc = dp_ctrl_setup_main_link(ctrl, true);
>> +if (!rc)
>> +break;
>> +/* try with lower link rate */
>> +dp_ctrl_link_rate_down_shift(ctrl);
>> +}
>> +
>> +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
>> +dp_ctrl_send_phy_test_pattern(ctrl);
>> +
>> +return rc;
>> +}
>> +
>> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +int ret = 0;
>> +
>> +if (!dp_ctrl)
>> +return -EINVAL;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> +dp_catalog_ctrl_reset(ctrl->catalog);
>> +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
>> +if (ret) {
>> +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +DRM_DEBUG_DP("DP off done\n");
>> +return ret;
>> +}
>> +
>> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +u32 isr;
>> +
>> +if (!dp_ctrl)
>> +return;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
>> +
>> +if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
>> +DRM_DEBUG_DP("dp_video_ready\n");
>> +complete(&ctrl->video_comp);
>> +}
>> +
>> +if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
>> +DRM_DEBUG_DP("idle_patterns_sent\n");
>> +complete(&ctrl->idle_comp);
>> +}
>> +}
>> +
>> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
>> struct dp_panel *panel,
>> +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
>> *catalog,
>> +struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct dp_ctrl_private *ctrl;
>> +struct dp_ctrl *dp_ctrl;
>> +
>> +if (!dev || !panel || !aux ||
>> +    !link || !catalog) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
>> +if (!ctrl) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +init_completion(&ctrl->idle_comp);
>> +init_completion(&ctrl->video_comp);
>> +mutex_init(&ctrl->push_idle_mutex);
>> +
>> +/* in parameters */
>> +ctrl->parser   = parser;
>> +ctrl->panel    = panel;
>> +ctrl->power    = power;
>> +ctrl->aux      = aux;
>> +ctrl->link     = link;
>> +ctrl->catalog  = catalog;
>> +ctrl->dev      = dev;
>> +
>> +dp_ctrl = &ctrl->dp_ctrl;
>> +
>> +return dp_ctrl;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
>> +{
>> +struct dp_ctrl_private *ctrl;
>> +
>> +if (!dp_ctrl)
>> +return;
>> +
>> +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> +
>> +mutex_destroy(&ctrl->push_idle_mutex);
>> +
>> +devm_kfree(ctrl->dev, ctrl);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> new file mode 100644
>> index 0000000..99ab4b2
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> @@ -0,0 +1,34 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_CTRL_H_
>> +#define _DP_CTRL_H_
>> +
>> +#include "dp_aux.h"
>> +#include "dp_panel.h"
>> +#include "dp_link.h"
>> +#include "dp_parser.h"
>> +#include "dp_power.h"
>> +#include "dp_catalog.h"
>> +
>> +struct dp_ctrl {
>> +bool orientation;
>> +atomic_t aborted;
>> +u32 pixel_rate;
>> +};
>> +
>> +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
>> +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
>> +int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
>> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
>> +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
>> +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
>> struct dp_panel *panel,
>> +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
>> *catalog,
>> +struct dp_parser *parser);
>> +void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
>> +
>> +#endif /* _DP_CTRL_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> new file mode 100644
>> index 0000000..a893542
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -0,0 +1,949 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/debugfs.h>
>> +#include <linux/component.h>
>> +#include <linux/of_irq.h>
>> +
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +#include "dp_extcon.h"
>> +#include "dp_parser.h"
>> +#include "dp_power.h"
>> +#include "dp_catalog.h"
>> +#include "dp_aux.h"
>> +#include "dp_link.h"
>> +#include "dp_panel.h"
>> +#include "dp_ctrl.h"
>> +#include "dp_display.h"
>> +#include "dp_drm.h"
>> +
>> +static struct msm_dp *g_dp_display;
>> +#define HPD_STRING_SIZE 30
>> +
>> +struct dp_display_private {
>> +char *name;
>> +int irq;
>> +
>> +/* state variables */
>> +bool core_initialized;
>> +bool power_on;
>> +bool hpd_irq_on;
>> +bool audio_supported;
>> +
>> +struct platform_device *pdev;
>> +struct dentry *root;
>> +struct completion notification_comp;
>> +
>> +struct dp_usbpd   *usbpd;
>> +struct dp_parser  *parser;
>> +struct dp_power   *power;
>> +struct dp_catalog *catalog;
>> +struct dp_aux     *aux;
>> +struct dp_link    *link;
>> +struct dp_panel   *panel;
>> +struct dp_ctrl    *ctrl;
>> +
>> +struct dp_usbpd_cb usbpd_cb;
>> +struct dp_display_mode dp_mode;
>> +struct msm_dp dp_display;
>> +};
>> +
>> +static const struct of_device_id dp_dt_match[] = {
>> +{.compatible = "qcom,dp-display"},
>> +{}
>> +};
>> +
>> +static irqreturn_t dp_display_irq(int irq, void *dev_id)
>> +{
>> +struct dp_display_private *dp = dev_id;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid data\n");
>> +return IRQ_NONE;
>> +}
>> +
>> +/* DP controller isr */
>> +dp_ctrl_isr(dp->ctrl);
>> +
>> +/* DP aux isr */
>> +dp_aux_isr(dp->aux);
>> +
>> +return IRQ_HANDLED;
>> +}
>> +
>> +static int dp_display_bind(struct device *dev, struct device *master,
>> +   void *data)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +struct drm_device *drm;
>> +struct msm_drm_private *priv;
>> +struct platform_device *pdev = to_platform_device(dev);
>> +
>> +if (!dev || !pdev || !master) {
>> +DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
>> +dev, pdev, master);
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +drm = dev_get_drvdata(master);
>> +dp = platform_get_drvdata(pdev);
>> +if (!drm || !dp) {
>> +DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
>> +drm, dp);
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp->dp_display.drm_dev = drm;
>> +priv = drm->dev_private;
>> +priv->dp = &(dp->dp_display);
>> +
>> +rc = dp->parser->parse(dp->parser);
>> +if (rc) {
>> +DRM_ERROR("device tree parsing failed\n");
>> +goto end;
>> +}
>> +
>> +rc = dp_aux_register(dp->aux);
>> +if (rc) {
>> +DRM_ERROR("DRM DP AUX register failed\n");
>> +goto end;
>> +}
>> +
>> +rc = dp_power_client_init(dp->power);
>> +if (rc) {
>> +DRM_ERROR("Power client create failed\n");
>> +goto end;
>> +}
>> +
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_unbind(struct device *dev, struct device
>> *master,
>> +      void *data)
>> +{
>> +struct dp_display_private *dp;
>> +struct platform_device *pdev = to_platform_device(dev);
>> +struct drm_device *drm = dev_get_drvdata(master);
>> +struct msm_drm_private *priv = drm->dev_private;
>> +
>> +if (!dev || !pdev) {
>> +DRM_ERROR("invalid param(s)\n");
>> +return;
>> +}
>> +
>> +dp = platform_get_drvdata(pdev);
>> +if (!dp) {
>> +DRM_ERROR("Invalid params\n");
>> +return;
>> +}
>> +
>> +(void)dp_power_client_deinit(dp->power);
>> +(void)dp_aux_unregister(dp->aux);
>> +priv->dp = NULL;
>> +}
>> +
>> +static const struct component_ops dp_display_comp_ops = {
>> +.bind = dp_display_bind,
>> +.unbind = dp_display_unbind,
>> +};
>> +
>> +static bool dp_display_is_ds_bridge(struct dp_panel *panel)
>> +{
>> +return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
>> +DP_DWN_STRM_PORT_PRESENT);
>> +}
>> +
>> +static bool dp_display_is_sink_count_zero(struct dp_display_private
>> *dp)
>> +{
>> +return dp_display_is_ds_bridge(dp->panel) &&
>> +(dp->link->sink_count == 0);
>> +}
>> +
>> +static void dp_display_send_hpd_event(struct msm_dp *dp_display)
>> +{
>> +struct dp_display_private *dp;
>> +struct drm_connector *connector;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +connector = dp->dp_display.connector;
>> +drm_helper_hpd_irq_event(connector->dev);
>> +}
>> +
>> +static int dp_display_send_hpd_notification(struct dp_display_private
>> *dp,
>> +    bool hpd)
>> +{
>> +static bool encoder_mode_set = false;
>> +struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
>> +struct msm_kms *kms = priv->kms;
>> +
>> +mutex_lock(&dp->dp_display.connect_mutex);
>> +if ((hpd && dp->dp_display.is_connected) ||
>> +(!hpd && !dp->dp_display.is_connected)) {
>> +DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return 0;
>> +}
>> +
>> +/* reset video pattern flag on disconnect */
>> +if (!hpd)
>> +dp->panel->video_test = false;
>> +
>> +dp->dp_display.is_connected = hpd;
>> +reinit_completion(&dp->notification_comp);
>> +
>> +if (dp->dp_display.is_connected && dp->dp_display.encoder
>> +&& !encoder_mode_set
>> +&& kms->funcs->set_encoder_mode) {
>> +kms->funcs->set_encoder_mode(kms,
>> +dp->dp_display.encoder, false);
>> +DRM_DEBUG_DP("set_encoder_mode() Completed\n");
>> +encoder_mode_set = true;
>> +}
>> +
>> +dp_display_send_hpd_event(&dp->dp_display);
>> +
>> +if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
>> +pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return -EINVAL;
>> +}
>> +
>> +mutex_unlock(&dp->dp_display.connect_mutex);
>> +return 0;
>> +}
>> +
>> +static int dp_display_process_hpd_high(struct dp_display_private *dp)
>> +{
>> +int rc = 0;
>> +struct edid *edid;
>> +
>> +dp_aux_init(dp->aux, dp->parser->aux_cfg);
>> +
>> +if (dp->link->psm_enabled)
>> +goto notify;
>> +
>> +rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
>> +if (rc)
>> +goto notify;
>> +
>> +dp_link_process_request(dp->link);
>> +
>> +if (dp_display_is_sink_count_zero(dp)) {
>> +DRM_DEBUG_DP("no downstream devices connected\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +edid = dp->panel->edid;
>> +
>> +dp->audio_supported = drm_detect_monitor_audio(edid);
>> +
>> +dp_panel_handle_sink_request(dp->panel);
>> +
>> +dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
>> +notify:
>> +dp_display_send_hpd_notification(dp, true);
>> +
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_host_init(struct dp_display_private *dp)
>> +{
>> +bool flip = false;
>> +
>> +if (dp->core_initialized) {
>> +DRM_DEBUG_DP("DP core already initialized\n");
>> +return;
>> +}
>> +
>> +if (dp->usbpd->orientation == ORIENTATION_CC2)
>> +flip = true;
>> +
>> +dp_power_init(dp->power, flip);
>> +dp_ctrl_host_init(dp->ctrl, flip);
>> +enable_irq(dp->irq);
>> +dp->core_initialized = true;
>> +}
>> +
>> +static void dp_display_host_deinit(struct dp_display_private *dp)
>> +{
>> +if (!dp->core_initialized) {
>> +DRM_DEBUG_DP("DP core already off\n");
>> +return;
>> +}
>> +
>> +dp_ctrl_host_deinit(dp->ctrl);
>> +dp_aux_deinit(dp->aux);
>> +dp_power_deinit(dp->power);
>> +disable_irq(dp->irq);
>> +dp->core_initialized = false;
>> +}
>> +
>> +static void dp_display_process_hpd_low(struct dp_display_private *dp)
>> +{
>> +dp_display_send_hpd_notification(dp, false);
>> +
>> +dp_aux_deinit(dp->aux);
>> +}
>> +
>> +static int dp_display_usbpd_configure_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +rc = -ENODEV;
>> +goto end;
>> +}
>> +
>> +dp_display_host_init(dp);
>> +
>> +if (dp->usbpd->hpd_high)
>> +dp_display_process_hpd_high(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_clean(struct dp_display_private *dp)
>> +{
>> +dp_ctrl_push_idle(dp->ctrl);
>> +dp_ctrl_off(dp->ctrl);
>> +}
>> +
>> +static int dp_display_usbpd_disconnect_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +rc = -EINVAL;
>> +goto end;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +rc = -ENODEV;
>> +goto end;
>> +}
>> +
>> +rc = dp_display_send_hpd_notification(dp, false);
>> +
>> +/* if cable is disconnected, reset psm_enabled flag */
>> +if (!dp->usbpd->alt_mode_cfg_done)
>> +dp->link->psm_enabled = false;
>> +
>> +if ((rc < 0) && dp->power_on)
>> +dp_display_clean(dp);
>> +
>> +dp_display_host_deinit(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_handle_video_request(struct dp_display_private
>> *dp)
>> +{
>> +if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
>> +/* force disconnect followed by connect */
>> +dp->usbpd->connect(dp->usbpd, false);
>> +dp->panel->video_test = true;
>> +dp->usbpd->connect(dp->usbpd, true);
>> +dp_link_send_test_response(dp->link);
>> +}
>> +}
>> +
>> +static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
>> +{
>> +if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
>> +dp_display_send_hpd_notification(dp, false);
>> +
>> +if (dp_display_is_sink_count_zero(dp)) {
>> +DRM_DEBUG_DP("sink count is zero, nothing to do\n");
>> +return 0;
>> +}
>> +
>> +return dp_display_process_hpd_high(dp);
>> +}
>> +
>> +dp_ctrl_handle_sink_request(dp->ctrl);
>> +
>> +dp_display_handle_video_request(dp);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_display_usbpd_attention_cb(struct device *dev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dev) {
>> +DRM_ERROR("invalid dev\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp = dev_get_drvdata(dev);
>> +if (!dp) {
>> +DRM_ERROR("no driver data found\n");
>> +return -ENODEV;
>> +}
>> +
>> +if (dp->usbpd->hpd_irq) {
>> +dp->hpd_irq_on = true;
>> +
>> +rc = dp_link_process_request(dp->link);
>> +/* check for any test request issued by sink */
>> +if (!rc)
>> +dp_display_handle_hpd_irq(dp);
>> +
>> +dp->hpd_irq_on = false;
>> +goto end;
>> +}
>> +
>> +if (!dp->usbpd->hpd_high) {
>> +dp_display_process_hpd_low(dp);
>> +goto end;
>> +}
>> +
>> +if (dp->usbpd->alt_mode_cfg_done)
>> +dp_display_process_hpd_high(dp);
>> +end:
>> +return rc;
>> +}
>> +
>> +static void dp_display_deinit_sub_modules(struct dp_display_private
>> *dp)
>> +{
>> +dp_ctrl_put(dp->ctrl);
>> +dp_link_put(dp->link);
>> +dp_panel_put(dp->panel);
>> +dp_aux_put(dp->aux);
>> +dp_power_put(dp->power);
>> +dp_catalog_put(dp->catalog);
>> +dp_parser_put(dp->parser);
>> +}
>> +
>> +static int dp_init_sub_modules(struct dp_display_private *dp)
>> +{
>> +int rc = 0;
>> +struct device *dev = &dp->pdev->dev;
>> +struct dp_usbpd_cb *cb = &dp->usbpd_cb;
>> +struct dp_panel_in panel_in = {
>> +.dev = dev,
>> +};
>> +
>> +/* Callback APIs used for cable status change event */
>> +cb->configure  = dp_display_usbpd_configure_cb;
>> +cb->disconnect = dp_display_usbpd_disconnect_cb;
>> +cb->attention  = dp_display_usbpd_attention_cb;
>> +
>> +dp->parser = dp_parser_get(dp->pdev);
>> +if (IS_ERR(dp->parser)) {
>> +rc = PTR_ERR(dp->parser);
>> +DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
>> +dp->parser = NULL;
>> +goto error_parser;
>> +}
>> +
>> +dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>> +if (IS_ERR(dp->catalog)) {
>> +rc = PTR_ERR(dp->catalog);
>> +DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
>> +dp->catalog = NULL;
>> +goto error_catalog;
>> +}
>> +
>> +dp->power = dp_power_get(dp->parser);
>> +if (IS_ERR(dp->power)) {
>> +rc = PTR_ERR(dp->power);
>> +DRM_ERROR("failed to initialize power, rc = %d\n", rc);
>> +dp->power = NULL;
>> +goto error_power;
>> +}
>> +
>> +dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
>> +if (IS_ERR(dp->aux)) {
>> +rc = PTR_ERR(dp->aux);
>> +DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
>> +dp->aux = NULL;
>> +goto error_aux;
>> +}
>> +
>> +dp->link = dp_link_get(dev, dp->aux);
>> +if (IS_ERR(dp->link)) {
>> +rc = PTR_ERR(dp->link);
>> +DRM_ERROR("failed to initialize link, rc = %d\n", rc);
>> +dp->link = NULL;
>> +goto error_link;
>> +}
>> +
>> +panel_in.aux = dp->aux;
>> +panel_in.catalog = dp->catalog;
>> +panel_in.link = dp->link;
>> +
>> +dp->panel = dp_panel_get(&panel_in);
>> +if (IS_ERR(dp->panel)) {
>> +rc = PTR_ERR(dp->panel);
>> +DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>> +dp->panel = NULL;
>> +goto error_panel;
>> +}
>> +
>> +dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
>> +       dp->power, dp->catalog, dp->parser);
>> +if (IS_ERR(dp->ctrl)) {
>> +rc = PTR_ERR(dp->ctrl);
>> +DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
>> +dp->ctrl = NULL;
>> +goto error_ctrl;
>> +}
>> +
>> +return rc;
>> +error_ctrl:
>> +dp_panel_put(dp->panel);
>> +error_panel:
>> +dp_link_put(dp->link);
>> +error_link:
>> +dp_aux_put(dp->aux);
>> +error_aux:
>> +dp_power_put(dp->power);
>> +error_power:
>> +dp_catalog_put(dp->catalog);
>> +error_catalog:
>> +dp_parser_put(dp->parser);
>> +error_parser:
>> +return rc;
>> +}
>> +
>> +static int dp_display_set_mode(struct msm_dp *dp_display,
>> +       struct dp_display_mode *mode)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +dp->panel->dp_mode.drm_mode = mode->drm_mode;
>> +dp->panel->dp_mode.bpp = mode->bpp;
>> +dp->panel->dp_mode.capabilities = mode->capabilities;
>> +dp_panel_init_panel_info(dp->panel);
>> +return rc;
>> +}
>> +
>> +static int dp_display_prepare(struct msm_dp *dp)
>> +{
>> +return 0;
>> +}
>> +
>> +static int dp_display_enable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (dp->power_on) {
>> +DRM_DEBUG_DP("Link already setup, return\n");
>> +return 0;
>> +}
>> +
>> +dp_aux_init(dp->aux, dp->parser->aux_cfg);
>> +
>> +rc = dp_ctrl_on(dp->ctrl);
>> +if (!rc)
>> +dp->power_on = true;
>> +
>> +return rc;
>> +}
>> +
>> +static int dp_display_post_enable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +complete_all(&dp->notification_comp);
>> +return rc;
>> +}
>> +
>> +static int dp_display_pre_disable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (dp->usbpd->alt_mode_cfg_done)
>> +dp_link_psm_config(dp->link, &dp->panel->link_info, true);
>> +
>> +dp_ctrl_push_idle(dp->ctrl);
>> +return rc;
>> +}
>> +
>> +static int dp_display_disable(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +if (!dp->power_on || !dp->core_initialized)
>> +goto error;
>> +
>> +dp_ctrl_off(dp->ctrl);
>> +
>> +dp->power_on = false;
>> +
>> +complete_all(&dp->notification_comp);
>> +error:
>> +return rc;
>> +}
>> +
>> +int dp_display_request_irq(struct msm_dp *dp_display)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!dp_display) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp = container_of(dp_display, struct dp_display_private, dp_display);
>> +
>> +dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
>> +if (dp->irq < 0) {
>> +rc = dp->irq;
>> +DRM_ERROR("failed to get irq: %d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
>> +IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
>> +if (rc < 0) {
>> +DRM_ERROR("failed to request IRQ%u: %d\n",
>> +dp->irq, rc);
>> +return rc;
>> +}
>> +disable_irq(dp->irq);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_display_unprepare(struct msm_dp *dp)
>> +{
>> +return 0;
>> +}
>> +
>> +int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
>> +{
>> +const u32 num_components = 3, default_bpp = 24;
>> +struct dp_display_private *dp_display;
>> +struct drm_dp_link *link_info;
>> +u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
>> +
>> +if (!dp || !mode_pclk_khz || !dp->connector) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +link_info = &dp_display->panel->link_info;
>> +
>> +mode_bpp = dp->connector->display_info.bpc * num_components;
>> +if (!mode_bpp)
>> +mode_bpp = default_bpp;
>> +
>> +mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
>> +mode_bpp, mode_pclk_khz);
>> +
>> +mode_rate_khz = mode_pclk_khz * mode_bpp;
>> +supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
>> +
>> +if (mode_rate_khz > supported_rate_khz)
>> +return MODE_BAD;
>> +
>> +return MODE_OK;
>> +}
>> +
>> +int dp_display_get_modes(struct msm_dp *dp,
>> +struct dp_display_mode *dp_mode)
>> +{
>> +struct dp_display_private *dp_display;
>> +int ret = 0;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return 0;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +ret = dp_panel_get_modes(dp_display->panel,
>> +dp->connector, dp_mode);
>> +if (dp_mode->drm_mode.clock)
>> +dp->max_pclk_khz = dp_mode->drm_mode.clock;
>> +return ret;
>> +}
>> +
>> +bool dp_display_check_video_test(struct msm_dp *dp)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return false;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +if (dp_display->panel->video_test)
>> +return true;
>> +
>> +return false;
>> +}
>> +
>> +int dp_display_get_test_bpp(struct msm_dp *dp)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +if (!dp) {
>> +DRM_ERROR("invalid params\n");
>> +return 0;
>> +}
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +return dp_link_bit_depth_to_bpp(
>> +dp_display->link->test_video.test_bit_depth);
>> +}
>> +
>> +static int dp_display_probe(struct platform_device *pdev)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp;
>> +
>> +if (!pdev || !pdev->dev.of_node) {
>> +DRM_ERROR("pdev not found\n");
>> +return -ENODEV;
>> +}
>> +
>> +dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
>> +if (!dp)
>> +return -ENOMEM;
>> +
>> +init_completion(&dp->notification_comp);
>> +
>> +dp->pdev = pdev;
>> +dp->name = "drm_dp";
>> +
>> +rc = dp_init_sub_modules(dp);
>> +if (rc) {
>> +DRM_ERROR("init sub module failed\n");
>> +devm_kfree(&pdev->dev, dp);
>> +return -EPROBE_DEFER;
>> +}
>> +
>> +platform_set_drvdata(pdev, dp);
>> +
>> +mutex_init(&dp->dp_display.connect_mutex);
>> +g_dp_display = &dp->dp_display;
>> +
>> +rc = component_add(&pdev->dev, &dp_display_comp_ops);
>> +if (rc) {
>> +DRM_ERROR("component add failed, rc=%d\n", rc);
>> +dp_display_deinit_sub_modules(dp);
>> +devm_kfree(&pdev->dev, dp);
>> +}
>> +
>> +return rc;
>> +}
>> +
>> +static int dp_display_remove(struct platform_device *pdev)
>> +{
>> +struct dp_display_private *dp;
>> +
>> +if (!pdev)
>> +return -EINVAL;
>> +
>> +dp = platform_get_drvdata(pdev);
>> +
>> +dp_display_deinit_sub_modules(dp);
>> +
>> +platform_set_drvdata(pdev, NULL);
>> +devm_kfree(&pdev->dev, dp);
>> +
>> +return 0;
>> +}
>> +
>> +static struct platform_driver dp_display_driver = {
>> +.probe  = dp_display_probe,
>> +.remove = dp_display_remove,
>> +.driver = {
>> +.name = "msm-dp-display",
>> +.of_match_table = dp_dt_match,
>> +},
>> +};
>> +
>> +int __init msm_dp_register(void)
>> +{
>> +int ret;
>> +
>> +ret = platform_driver_register(&dp_display_driver);
>> +if (ret) {
>> +DRM_ERROR("driver register failed");
>> +return ret;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +void __exit msm_dp_unregister(void)
>> +{
>> +platform_driver_unregister(&dp_display_driver);
>> +}
>> +
>> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
>> *dev,
>> +struct drm_encoder *encoder)
>> +{
>> +struct msm_drm_private *priv;
>> +int ret;
>> +
>> +if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
>> +return -EINVAL;
>> +
>> +priv = dev->dev_private;
>> +dp_display->drm_dev = dev;
>> +
>> +ret = dp_display_request_irq(dp_display);
>> +if (ret) {
>> +DRM_ERROR("request_irq failed, ret=%d\n", ret);
>> +return ret;
>> +}
>> +
>> +dp_display->encoder = encoder;
>> +
>> +dp_display->connector = dp_drm_connector_init(dp_display);
>> +if (IS_ERR(dp_display->connector)) {
>> +ret = PTR_ERR(dp_display->connector);
>> +DRM_DEV_ERROR(dev->dev,
>> +"failed to create dp connector: %d\n", ret);
>> +dp_display->connector = NULL;
>> +return ret;
>> +}
>> +
>> +priv->connectors[priv->num_connectors++] = dp_display->connector;
>> +return 0;
>> +}
>> +
>> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
>> *encoder)
>> +{
>> +int rc = 0;
>> +struct dp_display_private *dp_display;
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +if (!dp_display->dp_mode.drm_mode.clock) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +rc = dp_display_set_mode(dp, &dp_display->dp_mode);
>> +if (rc) {
>> +DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_prepare(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_enable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display enable failed, rc=%d\n", rc);
>> +dp_display_unprepare(dp);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_post_enable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
>> +dp_display_disable(dp);
>> +dp_display_unprepare(dp);
>> +}
>> +return rc;
>> +}
>> +
>> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
>> *encoder)
>> +{
>> +int rc = 0;
>> +
>> +rc = dp_display_pre_disable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_disable(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display disable failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = dp_display_unprepare(dp);
>> +if (rc) {
>> +DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
>> +}
>> +return rc;
>> +}
>> +
>> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
>> *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode)
>> +{
>> +struct dp_display_private *dp_display;
>> +
>> +dp_display = container_of(dp, struct dp_display_private, dp_display);
>> +
>> +memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
>> +
>> +if (dp_display_check_video_test(dp))
>> +dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
>> +else /* Default num_components per pixel = 3 */
>> +dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
>> +
>> +if (!dp_display->dp_mode.bpp)
>> +dp_display->dp_mode.bpp = 24; /* Default bpp */
>> +
>> +drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
>> +
>> +dp_display->dp_mode.v_active_low =
>> +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
>> +
>> +dp_display->dp_mode.h_active_low =
>> +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h
>> b/drivers/gpu/drm/msm/dp/dp_display.h
>> new file mode 100644
>> index 0000000..c916408
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
>> @@ -0,0 +1,29 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_DISPLAY_H_
>> +#define _DP_DISPLAY_H_
>> +
>> +#include <drm/drmP.h>
>> +
>> +#include "dp_panel.h"
>> +
>> +struct msm_dp {
>> +struct drm_device *drm_dev;
>> +struct drm_connector *connector;
>> +struct drm_encoder *encoder;
>> +bool is_connected;
>> +struct mutex connect_mutex;
>> +u32 max_pclk_khz;
>> +};
>> +
>> +int dp_display_validate_mode(struct msm_dp *dp_display, u32
>> mode_pclk_khz);
>> +int dp_display_get_modes(struct msm_dp *dp_display,
>> +struct dp_display_mode *dp_mode);
>> +int dp_display_request_irq(struct msm_dp *dp_display);
>> +bool dp_display_check_video_test(struct msm_dp *dp_display);
>> +int dp_display_get_test_bpp(struct msm_dp *dp_display);
>> +
>> +#endif /* _DP_DISPLAY_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c
>> b/drivers/gpu/drm/msm/dp/dp_drm.c
>> new file mode 100644
>> index 0000000..a72b0bb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
>> @@ -0,0 +1,173 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp]: %s: " fmt, __func__
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_crtc.h>
>> +
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +#include "dp_drm.h"
>> +
>> +struct dp_connector {
>> +struct drm_connector base;
>> +struct msm_dp *dp_display;
>> +};
>> +#define to_dp_connector(x) container_of(x, struct dp_connector, base)
>> +
>> +/**
>> + * dp_connector_detect - callback to determine if connector is
>> connected
>> + * @connector: Pointer to drm connector structure
>> + * @force: Force detect setting from drm framework
>> + * Returns: Connector 'is connected' status
>> + */
>> +static enum drm_connector_status dp_connector_detect(struct
>> drm_connector *conn,
>> +bool force)
>> +{
>> +struct msm_dp *dp;
>> +
>> +dp = to_dp_connector(conn)->dp_display;
>> +
>> +DRM_DEBUG_DP("is_connected = %s\n",
>> +(dp->is_connected) ? "true" : "false");
>> +
>> +return (dp->is_connected) ? connector_status_connected :
>> +connector_status_disconnected;
>> +}
>> +
>> +/**
>> + * dp_connector_get_modes - callback to add drm modes via
>> drm_mode_probed_add()
>> + * @connector: Pointer to drm connector structure
>> + * Returns: Number of modes added
>> + */
>> +static int dp_connector_get_modes(struct drm_connector *connector)
>> +{
>> +int rc = 0;
>> +struct msm_dp *dp;
>> +struct dp_display_mode *dp_mode = NULL;
>> +struct drm_display_mode *m, drm_mode;
>> +
>> +if (!connector)
>> +return 0;
>> +
>> +dp = to_dp_connector(connector)->dp_display;
>> +
>> +dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
>> +if (!dp_mode)
>> +return 0;
>> +
>> +mutex_lock(&dp->connect_mutex);
>> +/* pluggable case assumes EDID is read when HPD */
>> +if (dp->is_connected) {
>> +/*
>> + *The get_modes() function might return one mode that is stored
>> + * in dp_mode when compliance test is in progress. If not, the
>> + * return value is equal to the total number of modes supported
>> + * by the sink
>> + */
>> +rc = dp_display_get_modes(dp, dp_mode);
>> +if (rc <= 0) {
>> +DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
>> +mutex_unlock(&dp->connect_mutex);
>> +return rc;
>> +}
>> +if (dp_mode->drm_mode.clock) { /* valid DP mode */
>> +memset(&drm_mode, 0x0, sizeof(drm_mode));
>> +drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
>> +m = drm_mode_duplicate(connector->dev, &drm_mode);
>> +if (!m) {
>> +DRM_ERROR("failed to add mode %ux%u\n",
>> +       drm_mode.hdisplay,
>> +       drm_mode.vdisplay);
>> +kfree(dp_mode);
>> +mutex_unlock(&dp->connect_mutex);
>> +return 0;
>> +}
>> +drm_mode_probed_add(connector, m);
>> +}
>> +} else {
>> +DRM_DEBUG_DP("No sink connected\n");
>> +}
>> +mutex_unlock(&dp->connect_mutex);
>> +kfree(dp_mode);
>> +return rc;
>> +}
>> +
>> +/**
>> + * dp_connector_mode_valid - callback to determine if specified mode
>> is valid
>> + * @connector: Pointer to drm connector structure
>> + * @mode: Pointer to drm mode structure
>> + * Returns: Validity status for specified mode
>> + */
>> +static enum drm_mode_status dp_connector_mode_valid(struct
>> drm_connector *connector,
>> +struct drm_display_mode *mode)
>> +{
>> +struct msm_dp *dp_disp;
>> +
>> +if (!mode || !connector) {
>> +DRM_ERROR("invalid params\n");
>> +return MODE_ERROR;
>> +}
>> +
>> +dp_disp = to_dp_connector(connector)->dp_display;
>> +
>> +mode->vrefresh = drm_mode_vrefresh(mode);
>> +
>> +if ((dp_disp->max_pclk_khz <= 0) ||
>> +(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
>> +(mode->clock > dp_disp->max_pclk_khz))
>> +return MODE_BAD;
>> +
>> +return dp_display_validate_mode(dp_disp, mode->clock);
>> +}
>> +
>> +static const struct drm_connector_funcs dp_connector_funcs = {
>> +.detect = dp_connector_detect,
>> +.fill_modes = drm_helper_probe_single_connector_modes,
>> +.destroy = drm_connector_cleanup,
>> +.reset = drm_atomic_helper_connector_reset,
>> +.atomic_duplicate_state =
>> drm_atomic_helper_connector_duplicate_state,
>> +.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static const struct drm_connector_helper_funcs
>> dp_connector_helper_funcs = {
>> +.get_modes = dp_connector_get_modes,
>> +.mode_valid = dp_connector_mode_valid,
>> +};
>> +
>> +/* connector initialization */
>> +struct drm_connector *dp_drm_connector_init(struct msm_dp 
>> *dp_display)
>> +{
>> +struct drm_connector *connector = NULL;
>> +struct dp_connector *dp_connector;
>> +int ret;
>> +
>> +dp_connector = devm_kzalloc(dp_display->drm_dev->dev,
>> sizeof(*dp_connector),
>> +    GFP_KERNEL);
>> +if (!dp_connector)
>> +return ERR_PTR(-ENOMEM);
>> +
>> +dp_connector->dp_display = dp_display;
>> +
>> +connector = &dp_connector->base;
>> +
>> +ret = drm_connector_init(dp_display->drm_dev, connector,
>> &dp_connector_funcs,
>> +DRM_MODE_CONNECTOR_DisplayPort);
>> +if (ret)
>> +return ERR_PTR(ret);
>> +
>> +drm_connector_helper_add(connector, &dp_connector_helper_funcs);
>> +
>> +/*
>> + * Enable HPD to let hpd event is handled when cable is attached to
>> the host.
>> + */
>> +connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +drm_connector_attach_encoder(connector, dp_display->encoder);
>> +
>> +return connector;
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h
>> b/drivers/gpu/drm/msm/dp/dp_drm.h
>> new file mode 100644
>> index 0000000..cf472c5
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_DRM_H_
>> +#define _DP_DRM_H_
>> +
>> +#include <linux/types.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +
>> +#include "msm_drv.h"
>> +#include "dp_display.h"
>> +
>> +struct drm_connector *dp_drm_connector_init(struct msm_dp
>> *dp_display);
>> +
>> +#endif /* _DP_DRM_H_ */
>> +
>> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c
>> b/drivers/gpu/drm/msm/dp/dp_extcon.c
>> new file mode 100644
>> index 0000000..0fb34ef
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
>> @@ -0,0 +1,216 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/slab.h>
>> +#include <linux/device.h>
>> +#include <linux/extcon.h>
>> +#include <drm/drmP.h>
>> +
>> +#include "dp_extcon.h"
>> +
>> +/* DP specific VDM commands */
>> +#define DP_USBPD_VDM_STATUS0x10
>> +#define DP_USBPD_VDM_CONFIGURE0x11
>> +
>> +/* USBPD-TypeC specific Macros */
>> +#define VDM_VERSION0x0
>> +#define USB_C_DP_SID0xFF01
>> +
>> +struct dp_extcon_private {
>> +u32 vdo;
>> +struct device *dev;
>> +struct notifier_block extcon_nb;
>> +struct extcon_dev *extcon;
>> +struct workqueue_struct *extcon_wq;
>> +struct work_struct event_work;
>> +struct usbpd *pd;
>> +struct dp_usbpd_cb *dp_cb;
>> +struct dp_usbpd dp_usbpd;
>> +};
>> +
>> +static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
>> +{
>> +int rc = 0;
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +dp_usbpd->hpd_high = hpd;
>> +
>> +if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
>> +&& !extcon_priv->dp_cb->disconnect) {
>> +DRM_ERROR("extcon dp_cb not initialized\n");
>> +return -EINVAL;
>> +}
>> +if (hpd)
>> +extcon_priv->dp_cb->configure(extcon_priv->dev);
>> +else
>> +extcon_priv->dp_cb->disconnect(extcon_priv->dev);
>> +
>> +return rc;
>> +}
>> +
>> +static void dp_extcon_event_work(struct work_struct *work)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +int dp_state, ret;
>> +union extcon_property_value property;
>> +
>> +extcon_priv = container_of(work,
>> +struct dp_extcon_private, event_work);
>> +
>> +if (!extcon_priv || !extcon_priv->extcon) {
>> +DRM_ERROR("Invalid extcon device handler\n");
>> +return;
>> +}
>> +
>> +dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
>> +
>> +if (dp_state > 0) {
>> +ret = extcon_get_property(extcon_priv->extcon,
>> +EXTCON_DISP_DP,
>> +EXTCON_PROP_USB_TYPEC_POLARITY,
>> +&property);
>> +if (ret) {
>> +DRM_ERROR("Get Polarity property failed\n");
>> +return;
>> +}
>> +extcon_priv->dp_usbpd.orientation =
>> +(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
>> +
>> +extcon_get_property(extcon_priv->extcon,
>> +EXTCON_DISP_DP,
>> +EXTCON_PROP_USB_SS,
>> +&property);
>> +extcon_priv->dp_usbpd.multi_func =
>> +((property.intval) ? true : false);
>> +
>> +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
>> +if (ret) {
>> +DRM_ERROR("extcon_connect->true failed\n");
>> +return;
>> +}
>> +} else {
>> +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
>> +if (ret) {
>> +DRM_ERROR("extcon_connect->false failed\n");
>> +return;
>> +}
>> +}
>> +}
>> +
>> +static int dp_extcon_event_notify(struct notifier_block *nb,
>> +  unsigned long event, void *priv)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +extcon_priv = container_of(nb, struct dp_extcon_private,
>> +extcon_nb);
>> +
>> +queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
>> +return NOTIFY_DONE;
>> +}
>> +
>> +int dp_extcon_register(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +int ret = 0;
>> +
>> +if (!dp_usbpd)
>> +return -EINVAL;
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
>> +ret = devm_extcon_register_notifier(extcon_priv->dev,
>> extcon_priv->extcon,
>> +    EXTCON_DISP_DP,
>> +    &extcon_priv->extcon_nb);
>> +if (ret) {
>> +DRM_DEV_ERROR(extcon_priv->dev,
>> +"register EXTCON_DISP_DP notifier err\n");
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +extcon_priv->extcon_wq =
>> create_singlethread_workqueue("drm_dp_extcon");
>> +if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
>> +DRM_ERROR("Failed to create workqueue\n");
>> +dp_extcon_unregister(dp_usbpd);
>> +return -EPERM;
>> +}
>> +
>> +INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
>> +return ret;
>> +}
>> +
>> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon_priv;
>> +
>> +if (!dp_usbpd) {
>> +DRM_ERROR("Invalid input\n");
>> +return;
>> +}
>> +
>> +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
>> dp_usbpd);
>> +
>> +devm_extcon_unregister_notifier(extcon_priv->dev,
>> extcon_priv->extcon,
>> +    EXTCON_DISP_DP,
>> +    &extcon_priv->extcon_nb);
>> +
>> +if (extcon_priv->extcon_wq)
>> +destroy_workqueue(extcon_priv->extcon_wq);
>> +
>> +return;
>> +}
>> +
>> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
>> *cb)
>> +{
>> +int rc = 0;
>> +struct dp_extcon_private *dp_extcon;
>> +struct dp_usbpd *dp_usbpd;
>> +
>> +if (!cb) {
>> +DRM_ERROR("invalid cb data\n");
>> +rc = -EINVAL;
>> +return ERR_PTR(rc);
>> +}
>> +
>> +dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
>> +if (!dp_extcon) {
>> +rc = -ENOMEM;
>> +return ERR_PTR(rc);
>> +}
>> +
>> +dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
>> +if (!dp_extcon->extcon) {
>> +DRM_ERROR("invalid extcon data\n");
>> +rc = -EINVAL;
>> +devm_kfree(dev, dp_extcon);
>> +return ERR_PTR(rc);
>> +        }
>> +
>> +dp_extcon->dev = dev;
>> +dp_extcon->dp_cb = cb;
>> +
>> +dp_extcon->dp_usbpd.connect = dp_extcon_connect;
>> +dp_usbpd = &dp_extcon->dp_usbpd;
>> +
>> +return dp_usbpd;
>> +}
>> +
>> +void dp_extcon_put(struct dp_usbpd *dp_usbpd)
>> +{
>> +struct dp_extcon_private *extcon;
>> +
>> +if (!dp_usbpd)
>> +return;
>> +
>> +extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
>> +
>> +devm_kfree(extcon->dev, extcon);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h
>> b/drivers/gpu/drm/msm/dp/dp_extcon.h
>> new file mode 100644
>> index 0000000..c6c3051
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
>> @@ -0,0 +1,84 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_EXTCON_H_
>> +#define _DP_EXTCON_H_
>> +
>> +//#include <linux/usb/usbpd.h>
>> +
>> +#include <linux/types.h>
>> +#include <linux/device.h>
>> +
>> +enum plug_orientation {
>> +ORIENTATION_NONE,
>> +ORIENTATION_CC1,
>> +ORIENTATION_CC2,
>> +};
>> +
>> +/**
>> + * struct dp_usbpd - DisplayPort status
>> + *
>> + * @orientation: plug orientation configuration
>> + * @low_pow_st: low power state
>> + * @adaptor_dp_en: adaptor functionality enabled
>> + * @multi_func: multi-function preferred
>> + * @usb_config_req: request to switch to usb
>> + * @exit_dp_mode: request exit from displayport mode
>> + * @hpd_high: Hot Plug Detect signal is high.
>> + * @hpd_irq: Change in the status since last message
>> + * @alt_mode_cfg_done: bool to specify alt mode status
>> + * @debug_en: bool to specify debug mode
>> + * @connect: simulate disconnect or connect for debug mode
>> + */
>> +struct dp_usbpd {
>> +enum plug_orientation orientation;
>> +bool low_pow_st;
>> +bool adaptor_dp_en;
>> +bool multi_func;
>> +bool usb_config_req;
>> +bool exit_dp_mode;
>> +bool hpd_high;
>> +bool hpd_irq;
>> +bool alt_mode_cfg_done;
>> +bool debug_en;
>> +
>> +int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
>> +};
>> +
>> +/**
>> + * struct dp_usbpd_cb - callback functions provided by the client
>> + *
>> + * @configure: called by usbpd module when PD communication has
>> + * been completed and the usb peripheral has been configured on
>> + * dp mode.
>> + * @disconnect: notify the cable disconnect issued by usb.
>> + * @attention: notify any attention message issued by usb.
>> + */
>> +struct dp_usbpd_cb {
>> +int (*configure)(struct device *dev);
>> +int (*disconnect)(struct device *dev);
>> +int (*attention)(struct device *dev);
>> +};
>> +
>> +/**
>> + * dp_extcon_get() - setup usbpd module
>> + *
>> + * @dev: device instance of the caller
>> + * @cb: struct containing callback function pointers.
>> + *
>> + * This function allows the client to initialize the usbpd
>> + * module. The module will communicate with usb driver and
>> + * handles the power delivery (PD) communication with the
>> + * sink/usb device. This module will notify the client using
>> + * the callback functions about the connection and status.
>> + */
>> +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
>> *cb);
>> +
>> +void dp_extcon_put(struct dp_usbpd *pd);
>> +
>> +int dp_extcon_register(struct dp_usbpd *dp_usbpd);
>> +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
>> +
>> +#endif /* _DP_EXTCON_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> new file mode 100644
>> index 0000000..9f5b7bc8
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -0,0 +1,1185 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include "dp_link.h"
>> +#include "dp_panel.h"
>> +
>> +#define DP_TEST_REQUEST_MASK0x7F
>> +
>> +enum audio_sample_rate {
>> +AUDIO_SAMPLE_RATE_32_KHZ= 0x00,
>> +AUDIO_SAMPLE_RATE_44_1_KHZ= 0x01,
>> +AUDIO_SAMPLE_RATE_48_KHZ= 0x02,
>> +AUDIO_SAMPLE_RATE_88_2_KHZ= 0x03,
>> +AUDIO_SAMPLE_RATE_96_KHZ= 0x04,
>> +AUDIO_SAMPLE_RATE_176_4_KHZ= 0x05,
>> +AUDIO_SAMPLE_RATE_192_KHZ= 0x06,
>> +};
>> +
>> +enum audio_pattern_type {
>> +AUDIO_TEST_PATTERN_OPERATOR_DEFINED= 0x00,
>> +AUDIO_TEST_PATTERN_SAWTOOTH= 0x01,
>> +};
>> +
>> +struct dp_link_request {
>> +u32 test_requested;
>> +u32 test_link_rate;
>> +u32 test_lane_count;
>> +};
>> +
>> +struct dp_link_private {
>> +u32 prev_sink_count;
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_link dp_link;
>> +
>> +struct dp_link_request request;
>> +struct mutex test_response_mutex;
>> +struct mutex psm_mutex;
>> +u8 link_status[DP_LINK_STATUS_SIZE];
>> +};
>> +
>> +static int dp_link_get_period(struct dp_link_private *link, int const
>> addr)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +u32 const max_audio_period = 0xA;
>> +
>> +/* TEST_AUDIO_PERIOD_CH_XX */
>> +if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
>> +DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +/* Period - Bits 3:0 */
>> +data = data & 0xF;
>> +if ((int)data > max_audio_period) {
>> +DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +ret = data;
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_channel_period(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +struct dp_link_test_audio *req = &link->dp_link.test_audio;
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_1 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_2 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
>> +
>> +/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_3 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_4 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_5 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_6 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_7 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
>> +
>> +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
>> +if (ret == -EINVAL)
>> +goto exit;
>> +
>> +req->test_audio_period_ch_8 = ret;
>> +DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_pattern_type(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +int const max_audio_pattern_type = 0x1;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
>> +DP_TEST_AUDIO_PATTERN_TYPE, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Audio Pattern Type - Bits 7:0 */
>> +if ((int)data > max_audio_pattern_type) {
>> +DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +link->dp_link.test_audio.test_audio_pattern_type = data;
>> +DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
>> +exit:
>> +return ret;
>> +}
>> +
>> +static int dp_link_parse_audio_mode(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +int const max_audio_sampling_rate = 0x6;
>> +int const max_audio_channel_count = 0x8;
>> +int sampling_rate = 0x0;
>> +int channel_count = 0x0;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE,
>> &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Sampling Rate - Bits 3:0 */
>> +sampling_rate = data & 0xF;
>> +if (sampling_rate > max_audio_sampling_rate) {
>> +DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
>> +sampling_rate, max_audio_sampling_rate);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +/* Channel Count - Bits 7:4 */
>> +channel_count = ((data & 0xF0) >> 4) + 1;
>> +if (channel_count > max_audio_channel_count) {
>> +DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
>> +channel_count, max_audio_channel_count);
>> +ret = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
>> +link->dp_link.test_audio.test_audio_channel_count = channel_count;
>> +DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
>> +sampling_rate, channel_count);
>> +exit:
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_parse_audio_pattern_params() - parses audio pattern parameters
>> from DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the audio link pattern
>> parameters.
>> + */
>> +static int dp_link_parse_audio_pattern_params(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +
>> +ret = dp_link_parse_audio_mode(link);
>> +if (ret)
>> +goto exit;
>> +
>> +ret = dp_link_parse_audio_pattern_type(link);
>> +if (ret)
>> +goto exit;
>> +
>> +ret = dp_link_parse_audio_channel_period(link);
>> +
>> +exit:
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_is_video_pattern_valid() - validates the video pattern
>> + * @pattern: video pattern requested by the sink
>> + *
>> + * Returns true if the requested video pattern is supported.
>> + */
>> +static bool dp_link_is_video_pattern_valid(u32 pattern)
>> +{
>> +switch (pattern) {
>> +case DP_NO_TEST_PATTERN:
>> +case DP_COLOR_RAMP:
>> +case DP_BLACK_AND_WHITE_VERTICAL_LINES:
>> +case DP_COLOR_SQUARE:
>> +return true;
>> +default:
>> +return false;
>> +}
>> +}
>> +
>> +/**
>> + * dp_link_is_bit_depth_valid() - validates the bit depth requested
>> + * @bit_depth: bit depth requested by the sink
>> + *
>> + * Returns true if the requested bit depth is supported.
>> + */
>> +static bool dp_link_is_bit_depth_valid(u32 tbd)
>> +{
>> +/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
>> +switch (tbd) {
>> +case DP_TEST_BIT_DEPTH_6:
>> +case DP_TEST_BIT_DEPTH_8:
>> +case DP_TEST_BIT_DEPTH_10:
>> +return true;
>> +default:
>> +return false;
>> +}
>> +}
>> +
>> +static int dp_link_parse_timing_params1(struct dp_link_private *link,
>> +int addr, int len, u32 *val)
>> +{
>> +u8 bp[2];
>> +int rlen;
>> +
>> +if (len != 2)
>> +return -EINVAL;
>> +
>> +/* Read the requested video link pattern (Byte 0x221). */
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
>> +if (rlen < len) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +
>> +*val = bp[1] | (bp[0] << 8);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_link_parse_timing_params2(struct dp_link_private *link,
>> +int addr, int len,
>> +u32 *val1, u32 *val2)
>> +{
>> +u8 bp[2];
>> +int rlen;
>> +
>> +if (len != 2)
>> +return -EINVAL;
>> +
>> +/* Read the requested video link pattern (Byte 0x221). */
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
>> +if (rlen < len) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +
>> +*val1 = (bp[0] & BIT(7)) >> 7;
>> +*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_link_parse_timing_params3(struct dp_link_private *link,
>> +int addr, u32 *val)
>> +{
>> +u8 bp;
>> +u32 len = 1;
>> +int rlen;
>> +
>> +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
>> +if (rlen < 1) {
>> +DRM_ERROR("failed to read 0x%x\n", addr);
>> +return -EINVAL;
>> +}
>> +*val = bp;
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_parse_video_pattern_params() - parses video pattern parameters
>> from DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the video link pattern and the
>> link
>> + * bit depth requested by the sink and, and if the values parsed are
>> valid.
>> + */
>> +static int dp_link_parse_video_pattern_params(struct dp_link_private
>> *link)
>> +{
>> +int ret = 0;
>> +ssize_t rlen;
>> +u8 bp;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!dp_link_is_video_pattern_valid(bp)) {
>> +DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +link->dp_link.test_video.test_video_pattern = bp;
>> +
>> +/* Read the requested color bit depth and dynamic range (Byte 0x232)
>> */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +/* Dynamic Range */
>> +link->dp_link.test_video.test_dyn_range = (bp &
>> DP_TEST_DYNAMIC_RANGE_CEA);
>> +
>> +/* Color bit depth */
>> +bp &= DP_TEST_BIT_DEPTH_MASK;
>> +if (!dp_link_is_bit_depth_valid(bp)) {
>> +DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
>> +ret = -EINVAL;
>> +return ret;
>> +}
>> +
>> +link->dp_link.test_video.test_bit_depth = bp;
>> +
>> +/* resolution timing params */
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
>> +&link->dp_link.test_video.test_h_total);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
>> +&link->dp_link.test_video.test_v_total);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
>> +&link->dp_link.test_video.test_h_start);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
>> +&link->dp_link.test_video.test_v_start);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
>> +&link->dp_link.test_video.test_hsync_pol,
>> +&link->dp_link.test_video.test_hsync_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
>> +&link->dp_link.test_video.test_vsync_pol,
>> +&link->dp_link.test_video.test_vsync_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
>> +&link->dp_link.test_video.test_h_width);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
>> +&link->dp_link.test_video.test_v_height);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
>> +&link->dp_link.test_video.test_rr_d);
>> +link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
>> +return ret;
>> +}
>> +
>> +ret = dp_link_parse_timing_params3(link,
>> DP_TEST_REFRESH_RATE_NUMERATOR,
>> +&link->dp_link.test_video.test_rr_n);
>> +if (ret) {
>> +DRM_ERROR("failed to parse test_rr_n
>> (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
>> +return ret;
>> +}
>> +
>> +DRM_DEBUG_DP("link video pattern = 0x%x\n" \
>> +"link dynamic range = 0x%x\n" \
>> +"link bit depth = 0x%x\n" \
>> +"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
>> +"TEST_H_START = %d, TEST_V_START = %d\n" \
>> +"TEST_HSYNC_POL = %d\n" \
>> +"TEST_HSYNC_WIDTH = %d\n" \
>> +"TEST_VSYNC_POL = %d\n" \
>> +"TEST_VSYNC_WIDTH = %d\n" \
>> +"TEST_H_WIDTH = %d\n" \
>> +"TEST_V_HEIGHT = %d\n" \
>> +"TEST_REFRESH_DENOMINATOR = %d\n" \
>> + "TEST_REFRESH_NUMERATOR = %d\n",
>> +link->dp_link.test_video.test_video_pattern,
>> +link->dp_link.test_video.test_dyn_range,
>> +link->dp_link.test_video.test_bit_depth,
>> +link->dp_link.test_video.test_h_total,
>> +link->dp_link.test_video.test_v_total,
>> +link->dp_link.test_video.test_h_start,
>> +link->dp_link.test_video.test_v_start,
>> +link->dp_link.test_video.test_hsync_pol,
>> +link->dp_link.test_video.test_hsync_width,
>> +link->dp_link.test_video.test_vsync_pol,
>> +link->dp_link.test_video.test_vsync_width,
>> +link->dp_link.test_video.test_h_width,
>> +link->dp_link.test_video.test_v_height,
>> +link->dp_link.test_video.test_rr_d,
>> +link->dp_link.test_video.test_rr_n);
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_parse_link_training_params() - parses link training
>> parameters from
>> + * DPCD
>> + * @link: Display Port Driver data
>> + *
>> + * Returns 0 if it successfully parses the link rate (Byte 0x219) and
>> lane
>> + * count (Byte 0x220), and if these values parse are valid.
>> + */
>> +static int dp_link_parse_link_training_params(struct dp_link_private
>> *link)
>> +{
>> +u8 bp;
>> +ssize_t rlen;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,&bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!is_link_rate_valid(bp)) {
>> +DRM_ERROR("invalid link rate = 0x%x\n", bp);
>> +return -EINVAL;
>> +}
>> +
>> +link->request.test_link_rate = bp;
>> +DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT,
>> &bp);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +bp &= DP_MAX_LANE_COUNT_MASK;
>> +
>> +if (!is_lane_count_valid(bp)) {
>> +DRM_ERROR("invalid lane count = 0x%x\n", bp);
>> +return -EINVAL;
>> +}
>> +
>> +link->request.test_lane_count = bp;
>> +DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_parse_phy_test_params() - parses the phy link parameters
>> + * @link: Display Port Driver data
>> + *
>> + * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is
>> being
>> + * requested.
>> + */
>> +static int dp_link_parse_phy_test_params(struct dp_link_private 
>> *link)
>> +{
>> +u8 data;
>> +ssize_t rlen;
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN,
>> &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +link->dp_link.phy_params.phy_test_pattern_sel = data;
>> +
>> +DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
>> +
>> +switch (data) {
>> +case DP_LINK_QUAL_PATTERN_DISABLE:
>> +case DP_LINK_QUAL_PATTERN_D10_2:
>> +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
>> +case DP_LINK_QUAL_PATTERN_PRBS7:
>> +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
>> +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
>> +return 0;
>> +default:
>> +return -EINVAL;
>> +}
>> +}
>> +
>> +/**
>> + * dp_link_is_video_audio_test_requested() - checks for audio/video
>> link request
>> + * @link: link requested by the sink
>> + *
>> + * Returns true if the requested link is a permitted audio/video 
>> link.
>> + */
>> +static bool dp_link_is_video_audio_test_requested(u32 link)
>> +{
>> +u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
>> +DP_TEST_LINK_AUDIO_PATTERN |
>> +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
>> +
>> +return ((link & video_audio_test) &&
>> +!(link & ~video_audio_test));
>> +}
>> +
>> +/**
>> + * dp_link_parse_request() - parses link request parameters from sink
>> + * @link: Display Port Driver data
>> + *
>> + * Parses the DPCD to check if an automated link is requested (Byte
>> 0x201),
>> + * and what type of link automation is being requested (Byte 0x218).
>> + */
>> +static int dp_link_parse_request(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +u8 data;
>> +ssize_t rlen;
>> +
>> +/**
>> + * Read the device service IRQ vector (Byte 0x201) to determine
>> + * whether an automated link has been requested by the sink.
>> + */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
>> +DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
>> +
>> +if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
>> +DRM_DEBUG_DP("no test requested\n");
>> +return 0;
>> +}
>> +
>> +/**
>> + * Read the link request byte (Byte 0x218) to determine what type
>> + * of automated link has been requested by the sink.
>> + */
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
>> +if (rlen < 0) {
>> +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
>> +DRM_DEBUG_DP("link 0x%x not supported\n", data);
>> +goto end;
>> +}
>> +
>> +DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
>> +link->request.test_requested = data;
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
>> +ret = dp_link_parse_phy_test_params(link);
>> +if (ret)
>> +goto end;
>> +ret = dp_link_parse_link_training_params(link);
>> +if (ret)
>> +goto end;
>> +}
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
>> +ret = dp_link_parse_link_training_params(link);
>> +if (ret)
>> +goto end;
>> +}
>> +
>> +if (dp_link_is_video_audio_test_requested(
>> +link->request.test_requested)) {
>> +ret = dp_link_parse_video_pattern_params(link);
>> +if (ret)
>> +goto end;
>> +
>> +ret = dp_link_parse_audio_pattern_params(link);
>> +}
>> +end:
>> +/*
>> + * Send a DP_TEST_ACK if all link parameters are valid, otherwise
>> send
>> + * a DP_TEST_NAK.
>> + */
>> +if (ret) {
>> +link->dp_link.test_response = DP_TEST_NAK;
>> +} else {
>> +if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
>> +link->dp_link.test_response = DP_TEST_ACK;
>> +else
>> +link->dp_link.test_response =
>> +DP_TEST_EDID_CHECKSUM_WRITE;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_parse_sink_count() - parses the sink count
>> + *
>> + * Parses the DPCD to check if there is an update to the sink count
>> + * (Byte 0x200), and whether all the sink devices connected have
>> Content
>> + * Protection enabled.
>> + */
>> +static int dp_link_parse_sink_count(struct dp_link *dp_link)
>> +{
>> +ssize_t rlen;
>> +bool cp_ready;
>> +
>> +struct dp_link_private *link = container_of(dp_link,
>> +struct dp_link_private, dp_link);
>> +
>> +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
>> + &link->dp_link.sink_count);
>> +if (rlen < 0) {
>> +DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
>> +return rlen;
>> +}
>> +
>> +cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
>> +
>> +link->dp_link.sink_count =
>> +DP_GET_SINK_COUNT(link->dp_link.sink_count);
>> +
>> +DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
>> +link->dp_link.sink_count, cp_ready);
>> +return 0;
>> +}
>> +
>> +static void dp_link_parse_sink_status_field(struct dp_link_private
>> *link)
>> +{
>> +int len = 0;
>> +
>> +link->prev_sink_count = link->dp_link.sink_count;
>> +dp_link_parse_sink_count(&link->dp_link);
>> +
>> +len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
>> +link->link_status);
>> +if (len < DP_LINK_STATUS_SIZE)
>> +DRM_ERROR("DP link status read failed\n");
>> +dp_link_parse_request(link);
>> +}
>> +
>> +/**
>> + * dp_link_process_link_training_request() - processes new training
>> requests
>> + * @link: Display Port link data
>> + *
>> + * This function will handle new link training requests that are
>> initiated by
>> + * the sink. In particular, it will update the requested lane count
>> and link
>> + * link rate, and then trigger the link retraining procedure.
>> + *
>> + * The function will return 0 if a link training request has been
>> processed,
>> + * otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_link_training_request(struct
>> dp_link_private *link)
>> +{
>> +if (link->request.test_requested != DP_TEST_LINK_TRAINING)
>> +return -EINVAL;
>> +
>> +DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
>> +DP_TEST_LINK_TRAINING,
>> +link->request.test_link_rate,
>> +link->request.test_lane_count);
>> +
>> +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
>> +link->dp_link.link_params.rate = link->request.test_link_rate;
>> +
>> +return 0;
>> +}
>> +
>> +bool dp_link_send_test_response(struct dp_link *dp_link)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return false;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->test_response_mutex);
>> +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
>> +dp_link->test_response);
>> +mutex_unlock(&link->test_response_mutex);
>> +
>> +return ret == 1;
>> +}
>> +
>> +int dp_link_psm_config(struct dp_link *dp_link,
>> +      struct drm_dp_link *link_info, bool enable)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid params\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->psm_mutex);
>> +if (enable)
>> +ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
>> +else
>> +ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
>> +
>> +if (ret)
>> +DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" :
>> "exit");
>> +else
>> +dp_link->psm_enabled = enable;
>> +
>> +mutex_unlock(&link->psm_mutex);
>> +return ret;
>> +}
>> +
>> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
>> +{
>> +struct dp_link_private *link = NULL;
>> +int ret = 0;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return false;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM,
>> checksum);
>> +return ret == 1;
>> +}
>> +
>> +static int dp_link_parse_vx_px(struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +
>> +DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
>> +drm_dp_get_adjust_request_voltage(link->link_status, 0),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 1),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 2),
>> +drm_dp_get_adjust_request_voltage(link->link_status, 3));
>> +
>> +DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
>> +
>> +/**
>> + * Update the voltage and pre-emphasis levels as per DPCD request
>> + * vector.
>> + */
>> +DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
>> +link->dp_link.phy_params.v_level,
>> +link->dp_link.phy_params.p_level);
>> +link->dp_link.phy_params.v_level =
>> +drm_dp_get_adjust_request_voltage(link->link_status, 0);
>> +link->dp_link.phy_params.p_level =
>> +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
>> +DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
>> +link->dp_link.phy_params.v_level,
>> +link->dp_link.phy_params.p_level);
>> +
>> +return ret;
>> +}
>> +
>> +/**
>> + * dp_link_process_phy_test_pattern_request() - process new phy link
>> requests
>> + * @link: Display Port Driver data
>> + *
>> + * This function will handle new phy link pattern requests that are
>> initiated
>> + * by the sink. The function will return 0 if a phy link pattern has
>> been
>> + * processed, otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_phy_test_pattern_request(
>> +struct dp_link_private *link)
>> +{
>> +int ret = 0;
>> +
>> +if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN))
>> {
>> +DRM_DEBUG_DP("no phy test\n");
>> +return -EINVAL;
>> +}
>> +
>> +if (!is_link_rate_valid(link->request.test_link_rate) ||
>> +!is_lane_count_valid(link->request.test_lane_count)) {
>> +DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
>> +link->request.test_link_rate, link->request.test_lane_count);
>> +return -EINVAL;
>> +}
>> +
>> +DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
>> +link->dp_link.link_params.rate,
>> +link->dp_link.link_params.num_lanes);
>> +
>> +DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
>> +link->request.test_link_rate, link->request.test_lane_count);
>> +
>> +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
>> +link->dp_link.link_params.rate = link->request.test_link_rate;
>> +
>> +ret = dp_link_parse_vx_px(link);
>> +if (ret)
>> +  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
>> +
>> +return ret;
>> +}
>> +
>> +static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE],
>> int r)
>> +{
>> +return link_status[r - DP_LANE0_1_STATUS];
>> +}
>> +
>> +/**
>> + * dp_link_process_link_status_update() - processes link status
>> updates
>> + * @link: Display Port link module data
>> + *
>> + * This function will check for changes in the link status, e.g. 
>> clock
>> + * recovery done on all lanes, and trigger link training if there is 
>> a
>> + * failure/error on the link.
>> + *
>> + * The function will return 0 if the a link status update has been
>> processed,
>> + * otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_link_status_update(struct dp_link_private
>> *link)
>> +{
>> +if (!(get_link_status(link->link_status,
>> DP_LANE_ALIGN_STATUS_UPDATED) &
>> +DP_LINK_STATUS_UPDATED) ||
>> +(drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes) &&
>> +drm_dp_channel_eq_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes)))
>> +return -EINVAL;
>> +
>> +DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
>> +drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes),
>> +drm_dp_clock_recovery_ok(link->link_status,
>> +link->dp_link.link_params.num_lanes));
>> +
>> +return 0;
>> +}
>> +
>> +/**
>> + * dp_link_process_downstream_port_status_change() - process port
>> status changes
>> + * @link: Display Port Driver data
>> + *
>> + * This function will handle downstream port updates that are
>> initiated by
>> + * the sink. If the downstream port status has changed, the EDID is
>> read via
>> + * AUX.
>> + *
>> + * The function will return 0 if a downstream port update has been
>> + * processed, otherwise it will return -EINVAL.
>> + */
>> +static int dp_link_process_ds_port_status_change(struct
>> dp_link_private *link)
>> +{
>> +if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED)
>> &
>> +DP_DOWNSTREAM_PORT_STATUS_CHANGED)
>> +goto reset;
>> +
>> +if (link->prev_sink_count == link->dp_link.sink_count)
>> +return -EINVAL;
>> +
>> +reset:
>> +/* reset prev_sink_count */
>> +link->prev_sink_count = link->dp_link.sink_count;
>> +
>> +return 0;
>> +}
>> +
>> +static bool dp_link_is_video_pattern_requested(struct dp_link_private
>> *link)
>> +{
>> +return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
>> +&& !(link->request.test_requested &
>> +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
>> +}
>> +
>> +static bool dp_link_is_audio_pattern_requested(struct dp_link_private
>> *link)
>> +{
>> +return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
>> +}
>> +
>> +static void dp_link_reset_data(struct dp_link_private *link)
>> +{
>> +link->request = (const struct dp_link_request){ 0 };
>> +link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
>> +link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
>> +link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
>> +link->dp_link.phy_params.phy_test_pattern_sel = 0;
>> +link->dp_link.sink_request = 0;
>> +link->dp_link.test_response = 0;
>> +}
>> +
>> +/**
>> + * dp_link_process_request() - handle HPD IRQ transition to HIGH
>> + * @link: pointer to link module data
>> + *
>> + * This function will handle the HPD IRQ state transitions from LOW 
>> to
>> HIGH
>> + * (including cases when there are back to back HPD IRQ HIGH)
>> indicating
>> + * the start of a new link training request or sink status update.
>> + */
>> +int dp_link_process_request(struct dp_link *dp_link)
>> +{
>> +int ret = 0;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +mutex_lock(&link->test_response_mutex);
>> +dp_link_reset_data(link);
>> +
>> +dp_link_parse_sink_status_field(link);
>> +mutex_unlock(&link->test_response_mutex);
>> +
>> +if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>> +dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_ds_port_status_change(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_link_training_request(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_TEST_LINK_TRAINING;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_phy_test_pattern_request(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
>> +return ret;
>> +}
>> +
>> +ret = dp_link_process_link_status_update(link);
>> +if (!ret) {
>> +dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
>> +return ret;
>> +}
>> +
>> +if (dp_link_is_video_pattern_requested(link)) {
>> +dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
>> +return -EINVAL;
>> +}
>> +
>> +if (dp_link_is_audio_pattern_requested(link)) {
>> +dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
>> +return -EINVAL;
>> +}
>> +
>> +return ret;
>> +}
>> +
>> +int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>> +{
>> +u32 cc;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +/*
>> + * Unless a video pattern CTS test is ongoing, use RGB_VESA
>> + * Only RGB_VESA and RGB_CEA supported for now
>> + */
>> +if (dp_link_is_video_pattern_requested(link))
>> +cc = link->dp_link.test_video.test_dyn_range;
>> +else
>> +cc = DP_TEST_DYNAMIC_RANGE_VESA;
>> +
>> +return cc;
>> +}
>> +
>> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
>> +{
>> +int i;
>> +int v_max = 0, p_max = 0;
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +/* use the max level across lanes */
>> +for (i = 0; i < dp_link->link_params.num_lanes; i++) {
>> +u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
>> +u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
>> +DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
>> +i, data_v, data_p);
>> +if (v_max < data_v)
>> +v_max = data_v;
>> +if (p_max < data_p)
>> +p_max = data_p;
>> +}
>> +
>> +dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
>> +dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
>> +
>> +/**
>> + * Adjust the voltage swing and pre-emphasis level combination to
>> within
>> + * the allowable range.
>> + */
>> +if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
>> +DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
>> +dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
>> +dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
>> +}
>> +
>> +if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
>> +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
>> +dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
>> +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
>> +}
>> +
>> +if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
>> +&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
>> +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
>> +dp_link->phy_params.p_level,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_1);
>> +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
>> +}
>> +
>> +DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
>> +dp_link->phy_params.v_level, dp_link->phy_params.p_level);
>> +
>> +return 0;
>> +}
>> +
>> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
>> +{
>> +u32 tbd;
>> +
>> +/*
>> + * Few simplistic rules and assumptions made here:
>> + *    1. Test bit depth is bit depth per color component
>> + *    2. Assume 3 color components
>> + */
>> +switch (bpp) {
>> +case 18:
>> +tbd = DP_TEST_BIT_DEPTH_6;
>> +break;
>> +case 24:
>> +tbd = DP_TEST_BIT_DEPTH_8;
>> +break;
>> +case 30:
>> +tbd = DP_TEST_BIT_DEPTH_10;
>> +break;
>> +default:
>> +tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
>> +break;
>> +}
>> +
>> +if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
>> +tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
>> +
>> +return tbd;
>> +}
>> +
>> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
>> +{
>> +int rc = 0;
>> +struct dp_link_private *link;
>> +struct dp_link *dp_link;
>> +
>> +if (!dev || !aux) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
>> +if (!link) {
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +link->dev   = dev;
>> +link->aux   = aux;
>> +
>> +mutex_init(&link->test_response_mutex);
>> +mutex_init(&link->psm_mutex);
>> +dp_link = &link->dp_link;
>> +
>> +return dp_link;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_link_put(struct dp_link *dp_link)
>> +{
>> +struct dp_link_private *link;
>> +
>> +if (!dp_link)
>> +return;
>> +
>> +link = container_of(dp_link, struct dp_link_private, dp_link);
>> +
>> +devm_kfree(link->dev, link);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h
>> b/drivers/gpu/drm/msm/dp/dp_link.h
>> new file mode 100644
>> index 0000000..607904b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
>> @@ -0,0 +1,132 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_LINK_H_
>> +#define _DP_LINK_H_
>> +
>> +#include "dp_aux.h"
>> +
>> +#define DS_PORT_STATUS_CHANGED 0x200
>> +#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>> +
>> +enum dp_link_voltage_level {
>> +DP_TRAIN_VOLTAGE_SWING_LVL_0= 0,
>> +DP_TRAIN_VOLTAGE_SWING_LVL_1= 1,
>> +DP_TRAIN_VOLTAGE_SWING_LVL_2= 2,
>> +DP_TRAIN_VOLTAGE_SWING_MAX= DP_TRAIN_VOLTAGE_SWING_LVL_2,
>> +};
>> +
>> +enum dp_link_preemaphasis_level {
>> +DP_TRAIN_PRE_EMPHASIS_LVL_0= 0,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_1= 1,
>> +DP_TRAIN_PRE_EMPHASIS_LVL_2= 2,
>> +DP_TRAIN_PRE_EMPHASIS_MAX= DP_TRAIN_PRE_EMPHASIS_LVL_2,
>> +};
>> +
>> +struct dp_link_test_video {
>> +u32 test_video_pattern;
>> +u32 test_bit_depth;
>> +u32 test_dyn_range;
>> +u32 test_h_total;
>> +u32 test_v_total;
>> +u32 test_h_start;
>> +u32 test_v_start;
>> +u32 test_hsync_pol;
>> +u32 test_hsync_width;
>> +u32 test_vsync_pol;
>> +u32 test_vsync_width;
>> +u32 test_h_width;
>> +u32 test_v_height;
>> +u32 test_rr_d;
>> +u32 test_rr_n;
>> +};
>> +
>> +struct dp_link_test_audio {
>> +u32 test_audio_sampling_rate;
>> +u32 test_audio_channel_count;
>> +u32 test_audio_pattern_type;
>> +u32 test_audio_period_ch_1;
>> +u32 test_audio_period_ch_2;
>> +u32 test_audio_period_ch_3;
>> +u32 test_audio_period_ch_4;
>> +u32 test_audio_period_ch_5;
>> +u32 test_audio_period_ch_6;
>> +u32 test_audio_period_ch_7;
>> +u32 test_audio_period_ch_8;
>> +};
>> +
>> +struct dp_link_phy_params {
>> +u32 phy_test_pattern_sel;
>> +u8 v_level;
>> +u8 p_level;
>> +};
>> +
>> +struct dp_link {
>> +u32 sink_request;
>> +u32 test_response;
>> +bool psm_enabled;
>> +
>> +u8 sink_count;
>> +struct dp_link_test_video test_video;
>> +struct dp_link_test_audio test_audio;
>> +struct dp_link_phy_params phy_params;
>> +struct drm_dp_link link_params;
>> +};
>> +
>> +/**
>> + * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
>> + * @tbd: test bit depth
>> + *
>> + * Returns the bits per pixel (bpp) to be used corresponding to the
>> + * git bit depth value. This function assumes that bit depth has
>> + * already been validated.
>> + */
>> +static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
>> +{
>> +/*
>> + * Few simplistic rules and assumptions made here:
>> + *    1. Bit depth is per color component
>> + *    2. If bit depth is unknown return 0
>> + *    3. Assume 3 color components
>> + */
>> +switch (tbd) {
>> +case DP_TEST_BIT_DEPTH_6:
>> +return 18;
>> +case DP_TEST_BIT_DEPTH_8:
>> +return 24;
>> +case DP_TEST_BIT_DEPTH_10:
>> +return 30;
>> +case DP_TEST_BIT_DEPTH_UNKNOWN:
>> +default:
>> +return 0;
>> +}
>> +}
>> +
>> +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
>> +int dp_link_process_request(struct dp_link *dp_link);
>> +int dp_link_get_colorimetry_config(struct dp_link *dp_link);
>> +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
>> +bool dp_link_send_test_response(struct dp_link *dp_link);
>> +int dp_link_psm_config(struct dp_link *dp_link,
>> +struct drm_dp_link *link_info, bool enable);
>> +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 
>> checksum);
>> +
>> +/**
>> + * dp_link_get() - get the functionalities of dp test module
>> + *
>> + *
>> + * return: a pointer to dp_link struct
>> + */
>> +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
>> +
>> +/**
>> + * dp_link_put() - releases the dp test module's resources
>> + *
>> + * @dp_link: an instance of dp_link module
>> + *
>> + */
>> +void dp_link_put(struct dp_link *dp_link);
>> +
>> +#endif /* _DP_LINK_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c
>> b/drivers/gpu/drm/msm/dp/dp_panel.c
>> new file mode 100644
>> index 0000000..a3150f4
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
>> @@ -0,0 +1,450 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include "dp_panel.h"
>> +
>> +#include <drm/drm_connector.h>
>> +#include <drm/drm_edid.h>
>> +
>> +#define DP_MAX_DS_PORT_COUNT 1
>> +
>> +struct dp_panel_private {
>> +struct device *dev;
>> +struct dp_panel dp_panel;
>> +struct dp_aux *aux;
>> +struct dp_link *link;
>> +struct dp_catalog *catalog;
>> +bool panel_on;
>> +bool aux_cfg_update_done;
>> +};
>> +
>> +static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +size_t rlen;
>> +struct dp_panel_private *panel;
>> +struct drm_dp_link *link_info;
>> +u8 *dpcd, major = 0, minor = 0;
>> +u32 dfp_count = 0;
>> +
>> +dpcd = dp_panel->dpcd;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +link_info = &dp_panel->link_info;
>> +rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
>> +if (rc < 0) {
>> +DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
>> +return rc;
>> +}
>> +major = (link_info->revision >> 4) & 0x0f;
>> +minor = link_info->revision & 0x0f;
>> +DRM_DEBUG_DP("version: %d.%d\n", major, minor);
>> +DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
>> +DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
>> +
>> +rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
>> +dpcd, (DP_RECEIVER_CAP_SIZE + 1));
>> +if (rlen < 0) {
>> +DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
>> +return -EINVAL;
>> +}
>> +
>> +dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
>> +DP_DOWN_STREAM_PORT_COUNT;
>> +if (dfp_count > DP_MAX_DS_PORT_COUNT) {
>> +DRM_ERROR("DS port count %d greater that max (%d) supported\n",
>> +dfp_count, DP_MAX_DS_PORT_COUNT);
>> +return -EINVAL;
>> +}
>> +return rc;
>> +}
>> +
>> +static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
>> +u32 mode_edid_bpp, u32 mode_pclk_khz)
>> +{
>> +struct drm_dp_link *link_info;
>> +const u32 max_supported_bpp = 30, min_supported_bpp = 18;
>> +u32 bpp = 0, data_rate_khz = 0;
>> +
>> +bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
>> +
>> +link_info = &dp_panel->link_info;
>> +data_rate_khz = link_info->num_lanes * link_info->rate * 8;
>> +
>> +while (bpp > min_supported_bpp) {
>> +if (mode_pclk_khz * bpp <= data_rate_khz)
>> +break;
>> +bpp -= 6;
>> +}
>> +
>> +return bpp;
>> +}
>> +
>> +static void dp_panel_set_test_mode(struct dp_panel_private *panel,
>> +struct dp_display_mode *mode)
>> +{
>> +struct drm_display_mode *drm_mode = NULL;
>> +struct dp_link_test_video *test_info = NULL;
>> +
>> +drm_mode = &mode->drm_mode;
>> +test_info = &panel->link->test_video;
>> +
>> +drm_mode->hdisplay = test_info->test_h_width;
>> +drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total
>> -
>> +(test_info->test_h_start + test_info->test_h_width);
>> +drm_mode->hsync_end = drm_mode->hsync_start +
>> test_info->test_hsync_width;
>> +drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
>> +test_info->test_hsync_width;
>> +
>> +drm_mode->vdisplay = test_info->test_v_height;
>> +drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total
>> -
>> +(test_info->test_v_start + test_info->test_v_height);
>> +drm_mode->vsync_end = drm_mode->vsync_start +
>> test_info->test_vsync_width;
>> +drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
>> +test_info->test_vsync_width;
>> +
>> +drm_mode->vrefresh = test_info->test_rr_n;
>> +drm_mode->clock = test_info->test_h_total *
>> +test_info->test_v_total * drm_mode->vrefresh;
>> +
>> +drm_mode->type = 0x48;
>> +drm_mode_set_name(drm_mode);
>> +
>> +if (test_info->test_rr_d == 0)
>> +drm_mode->clock /= 1000;
>> +else
>> +drm_mode->clock /= 1001;
>> +
>> +if (test_info->test_h_width == 640)
>> +drm_mode->clock = 25170;
>> +}
>> +
>> +static int dp_panel_update_modes(struct drm_connector *connector,
>> +struct edid *edid)
>> +{
>> +int rc = 0;
>> +
>> +if (edid) {
>> +rc = drm_connector_update_edid_property(connector, edid);
>> +if (rc) {
>> +DRM_ERROR("failed to update edid property %d\n", rc);
>> +return rc;
>> +}
>> +rc = drm_add_edid_modes(connector, edid);
>> +DRM_DEBUG_DP("%s -", __func__);
>> +return rc;
>> +}
>> +
>> +rc = drm_connector_update_edid_property(connector, NULL);
>> +if (rc)
>> +DRM_ERROR("failed to update edid property %d\n", rc);
>> +
>> +return rc;
>> +}
>> +
>> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
>> +struct drm_connector *connector)
>> +{
>> +int rc = 0, bw_code;
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel || !connector) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +rc = dp_panel_read_dpcd(dp_panel);
>> +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
>> +if (rc || !is_link_rate_valid(bw_code) ||
>> +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
>> +(bw_code > dp_panel->max_bw_code)) {
>> +DRM_ERROR("read dpcd failed %d\n", rc);
>> +return rc;
>> +}
>> +rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
>> +      drm_dp_is_branch(dp_panel->dpcd));
>> +if (rc) {
>> +DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
>> +return rc;
>> +}
>> +
>> +
>> +kfree(dp_panel->edid);
>> +dp_panel->edid = drm_get_edid(connector,
>> +      &panel->aux->drm_aux->ddc);
>> +if (!dp_panel->edid) {
>> +DRM_ERROR("panel edid read failed\n");
>> +return -EINVAL;
>> +}
>> +
>> +if (panel->aux_cfg_update_done) {
>> +DRM_DEBUG_DP("read DPCD with updated AUX config\n");
>> +rc = dp_panel_read_dpcd(dp_panel);
>> +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
>> +if (rc || !is_link_rate_valid(bw_code) ||
>> +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
>> +(bw_code > dp_panel->max_bw_code)) {
>> +DRM_ERROR("read dpcd failed %d\n", rc);
>> +return rc;
>> +}
>> +panel->aux_cfg_update_done = false;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
>> +u32 mode_edid_bpp, u32 mode_pclk_khz)
>> +{
>> +struct dp_panel_private *panel;
>> +u32 bpp = mode_edid_bpp;
>> +
>> +if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
>> +DRM_ERROR("invalid input\n");
>> +return 0;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (dp_panel->video_test)
>> +bpp = dp_link_bit_depth_to_bpp(
>> +panel->link->test_video.test_bit_depth);
>> +else
>> +bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
>> +mode_pclk_khz);
>> +
>> +return bpp;
>> +}
>> +
>> +int dp_panel_get_modes(struct dp_panel *dp_panel,
>> +struct drm_connector *connector, struct dp_display_mode *mode)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (dp_panel->video_test) {
>> +dp_panel_set_test_mode(panel, mode);
>> +return 1;
>> +} else if (dp_panel->edid) {
>> +return dp_panel_update_modes(connector, dp_panel->edid);
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +u8 dp_panel_get_edid_checksum(struct edid *edid)
>> +{
>> +struct edid *last_block;
>> +u8 *raw_edid;
>> +bool is_edid_corrupt;
>> +
>> +if (!edid) {
>> +DRM_ERROR("invalid edid input\n");
>> +return 0;
>> +}
>> +
>> +raw_edid = (u8 *)edid;
>> +raw_edid += (edid->extensions * EDID_LENGTH);
>> +last_block = (struct edid *)raw_edid;
>> +
>> +/* block type extension */
>> +drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
>> +if (!is_edid_corrupt)
>> +return last_block->checksum;
>> +
>> +DRM_ERROR("Invalid block, no checksum\n");
>> +return 0;
>> +}
>> +
>> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
>> +u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
>> +
>> +dp_link_send_edid_checksum(panel->link, checksum);
>> +dp_link_send_test_response(panel->link);
>> +}
>> +}
>> +
>> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
>> +{
>> +struct dp_catalog *catalog;
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel) {
>> +DRM_ERROR("invalid input\n");
>> +return;
>> +}
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +catalog = panel->catalog;
>> +
>> +if (!panel->panel_on) {
>> +DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
>> +return;
>> +}
>> +
>> +if (!enable) {
>> +dp_catalog_panel_tpg_disable(catalog);
>> +return;
>> +}
>> +
>> +DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
>> +dp_catalog_panel_tpg_enable(catalog,
>> &panel->dp_panel.dp_mode.drm_mode);
>> +}
>> +
>> +int dp_panel_timing_cfg(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +u32 data, total_ver, total_hor;
>> +struct dp_catalog *catalog;
>> +struct dp_panel_private *panel;
>> +struct drm_display_mode *drm_mode;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +catalog = panel->catalog;
>> +drm_mode = &panel->dp_panel.dp_mode.drm_mode;
>> +
>> +DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
>> +drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
>> +drm_mode->hsync_start - drm_mode->hdisplay,
>> +drm_mode->hsync_end - drm_mode->hsync_start);
>> +
>> +DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
>> +drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
>> +drm_mode->vsync_start - drm_mode->vdisplay,
>> +drm_mode->vsync_end - drm_mode->vsync_start);
>> +
>> +total_hor = drm_mode->htotal;
>> +
>> +total_ver = drm_mode->vtotal;
>> +
>> +data = total_ver;
>> +data <<= 16;
>> +data |= total_hor;
>> +
>> +catalog->total = data;
>> +
>> +data = (drm_mode->vtotal - drm_mode->vsync_start);
>> +data <<= 16;
>> +data |= (drm_mode->htotal - drm_mode->hsync_start);
>> +
>> +catalog->sync_start = data;
>> +
>> +data = drm_mode->vsync_end - drm_mode->vsync_start;
>> +data <<= 16;
>> +data |= (panel->dp_panel.dp_mode.v_active_low << 31);
>> +data |= drm_mode->hsync_end - drm_mode->hsync_start;
>> +data |= (panel->dp_panel.dp_mode.h_active_low << 15);
>> +
>> +catalog->width_blanking = data;
>> +
>> +data = drm_mode->vdisplay;
>> +data <<= 16;
>> +data |= drm_mode->hdisplay;
>> +
>> +catalog->dp_active = data;
>> +
>> +dp_catalog_panel_timing_cfg(catalog);
>> +panel->panel_on = true;
>> +
>> +return rc;
>> +}
>> +
>> +int dp_panel_init_panel_info(struct dp_panel *dp_panel)
>> +{
>> +int rc = 0;
>> +struct drm_display_mode *drm_mode;
>> +
>> +drm_mode = &dp_panel->dp_mode.drm_mode;
>> +
>> +/*
>> + * print resolution info as this is a result
>> + * of user initiated action of cable connection
>> + */
>> +DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
>> +DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
>> +drm_mode->vdisplay, drm_mode->vrefresh);
>> +DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
>> +drm_mode->htotal - drm_mode->hsync_end,
>> +drm_mode->hsync_start - drm_mode->hdisplay,
>> +drm_mode->hsync_end - drm_mode->hsync_start);
>> +DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
>> +drm_mode->vtotal - drm_mode->vsync_end,
>> +drm_mode->vsync_start - drm_mode->vdisplay,
>> +drm_mode->vsync_end - drm_mode->vsync_start);
>> +DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
>> +DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
>> +
>> +dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32,
>> dp_panel->dp_mode.bpp, 30));
>> +DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
>> +
>> +return rc;
>> +}
>> +
>> +struct dp_panel *dp_panel_get(struct dp_panel_in *in)
>> +{
>> +int rc = 0;
>> +struct dp_panel_private *panel;
>> +struct dp_panel *dp_panel;
>> +
>> +if (!in->dev || !in->catalog || !in->aux || !in->link) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
>> +if (!panel) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +panel->dev = in->dev;
>> +panel->aux = in->aux;
>> +panel->catalog = in->catalog;
>> +panel->link = in->link;
>> +
>> +dp_panel = &panel->dp_panel;
>> +dp_panel->max_bw_code = DP_LINK_BW_8_1;
>> +panel->aux_cfg_update_done = false;
>> +
>> +return dp_panel;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_panel_put(struct dp_panel *dp_panel)
>> +{
>> +struct dp_panel_private *panel;
>> +
>> +if (!dp_panel)
>> +return;
>> +
>> +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
>> +
>> +kfree(dp_panel->edid);
>> +dp_panel->edid = NULL;
>> +devm_kfree(panel->dev, panel);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h
>> b/drivers/gpu/drm/msm/dp/dp_panel.h
>> new file mode 100644
>> index 0000000..68c5650
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
>> @@ -0,0 +1,92 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_PANEL_H_
>> +#define _DP_PANEL_H_
>> +
>> +#include <drm/msm_drm.h>
>> +
>> +#include "dp_aux.h"
>> +#include "dp_link.h"
>> +#include "dp_extcon.h"
>> +
>> +struct edid;
>> +
>> +#define DP_MAX_DOWNSTREAM_PORTS 0x10
>> +
>> +struct dp_display_mode {
>> +struct drm_display_mode drm_mode;
>> +u32 capabilities;
>> +u32 bpp;
>> +u32 h_active_low;
>> +u32 v_active_low;
>> +};
>> +
>> +struct dp_panel_in {
>> +struct device *dev;
>> +struct dp_aux *aux;
>> +struct dp_link *link;
>> +struct dp_catalog *catalog;
>> +};
>> +
>> +struct dp_panel {
>> +/* dpcd raw data */
>> +u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
>> +
>> +struct drm_dp_link link_info;
>> +struct drm_dp_desc desc;
>> +struct edid *edid;
>> +struct drm_connector *connector;
>> +struct dp_display_mode dp_mode;
>> +bool video_test;
>> +
>> +u32 vic;
>> +u32 max_pclk_khz;
>> +
>> +u32 max_bw_code;
>> +};
>> +
>> +int dp_panel_init_panel_info(struct dp_panel *dp_panel);
>> +int dp_panel_deinit(struct dp_panel *dp_panel);
>> +int dp_panel_timing_cfg(struct dp_panel *dp_panel);
>> +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
>> +struct drm_connector *connector);
>> +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32 
>> mode_max_bpp,
>> +u32 mode_pclk_khz);
>> +int dp_panel_get_modes(struct dp_panel *dp_panel,
>> +struct drm_connector *connector, struct dp_display_mode *mode);
>> +void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
>> +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
>> +
>> +/**
>> + * is_link_rate_valid() - validates the link rate
>> + * @lane_rate: link rate requested by the sink
>> + *
>> + * Returns true if the requested link rate is supported.
>> + */
>> +static inline bool is_link_rate_valid(u32 bw_code)
>> +{
>> +return (bw_code == DP_LINK_BW_1_62 ||
>> +bw_code == DP_LINK_BW_2_7 ||
>> +bw_code == DP_LINK_BW_5_4 ||
>> +bw_code == DP_LINK_BW_8_1);
>> +}
>> +
>> +/**
>> + * dp_link_is_lane_count_valid() - validates the lane count
>> + * @lane_count: lane count requested by the sink
>> + *
>> + * Returns true if the requested lane count is supported.
>> + */
>> +static inline bool is_lane_count_valid(u32 lane_count)
>> +{
>> +return (lane_count == 1 ||
>> +lane_count == 2 ||
>> +lane_count == 4);
>> +}
>> +
>> +struct dp_panel *dp_panel_get(struct dp_panel_in *in);
>> +void dp_panel_put(struct dp_panel *dp_panel);
>> +#endif /* _DP_PANEL_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
>> b/drivers/gpu/drm/msm/dp/dp_parser.c
>> new file mode 100644
>> index 0000000..3fa2a1f
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
>> @@ -0,0 +1,496 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/of_gpio.h>
>> +
>> +#include "dp_parser.h"
>> +
>> +static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
>> +.num = 2,
>> +.regs = {
>> +{"vdda-1p2", 21800, 4 },/* 1.2 V */
>> +{"vdda-0p9", 36000, 32 },/* 0.9 V */
>> +},
>> +};
>> +
>> +static int msm_dss_ioremap_byname(struct platform_device *pdev,
>> +   struct dss_io_data *io_data, const char *name)
>> +{
>> +struct resource *res = NULL;
>> +
>> +if (!io_data) {
>> +DRM_ERROR("%pS->%s: invalid input\n",
>> +__builtin_return_address(0), __func__);
>> +return -EINVAL;
>> +}
>> +
>> +res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
>> +if (!res) {
>> +DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
>> +__builtin_return_address(0), __func__, name);
>> +return -ENODEV;
>> +}
>> +
>> +io_data->len = (u32)resource_size(res);
>> +io_data->base = ioremap(res->start, io_data->len);
>> +if (!io_data->base) {
>> +DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
>> +__builtin_return_address(0), __func__, name);
>> +return -EIO;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static void msm_dss_iounmap(struct dss_io_data *io_data)
>> +{
>> +if (!io_data) {
>> +DRM_ERROR("%pS->%s: invalid input\n",
>> +__builtin_return_address(0), __func__);
>> +return;
>> +}
>> +
>> +if (io_data->base) {
>> +iounmap(io_data->base);
>> +io_data->base = NULL;
>> +}
>> +io_data->len = 0;
>> +}
>> +
>> +static void dp_parser_unmap_io_resources(struct dp_parser *parser)
>> +{
>> +struct dp_io *io = &parser->io;
>> +
>> +msm_dss_iounmap(&io->dp_ahb);
>> +msm_dss_iounmap(&io->dp_aux);
>> +msm_dss_iounmap(&io->dp_link);
>> +msm_dss_iounmap(&io->dp_p0);
>> +msm_dss_iounmap(&io->phy_io);
>> +msm_dss_iounmap(&io->ln_tx0_io);
>> +msm_dss_iounmap(&io->ln_tx0_io);
>> +msm_dss_iounmap(&io->dp_pll_io);
>> +msm_dss_iounmap(&io->dp_cc_io);
>> +msm_dss_iounmap(&io->usb3_dp_com);
>> +msm_dss_iounmap(&io->qfprom_io);
>> +}
>> +
>> +static int dp_parser_ctrl_res(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +u32 index;
>> +struct platform_device *pdev = parser->pdev;
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +struct dp_io *io = &parser->io;
>> +
>> +rc = of_property_read_u32(of_node, "cell-index", &index);
>> +if (rc) {
>> +DRM_ERROR("cell-index not specified, rc=%d\n", rc);
>> +return rc;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
>> +if (rc) {
>> +DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
>> +if (rc) {
>> +DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
>> +goto err;
>> +}
>> +
>> +rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
>> +if (rc) {
>> +DRM_ERROR("unable to remap dp MMSS_CC resources\n");
>> +goto err;
>> +}
>> +
>> +if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
>> +pr_warn("unable to remap dp qfprom resources\n");
>> +
>> +return 0;
>> +err:
>> +dp_parser_unmap_io_resources(parser);
>> +return rc;
>> +}
>> +
>> +static const char *dp_get_phy_aux_config_property(u32 cfg_type)
>> +{
>> +switch (cfg_type) {
>> +case PHY_AUX_CFG0:
>> +return "qcom,aux-cfg0-settings";
>> +case PHY_AUX_CFG1:
>> +return "qcom,aux-cfg1-settings";
>> +case PHY_AUX_CFG2:
>> +return "qcom,aux-cfg2-settings";
>> +case PHY_AUX_CFG3:
>> +return "qcom,aux-cfg3-settings";
>> +case PHY_AUX_CFG4:
>> +return "qcom,aux-cfg4-settings";
>> +case PHY_AUX_CFG5:
>> +return "qcom,aux-cfg5-settings";
>> +case PHY_AUX_CFG6:
>> +return "qcom,aux-cfg6-settings";
>> +case PHY_AUX_CFG7:
>> +return "qcom,aux-cfg7-settings";
>> +case PHY_AUX_CFG8:
>> +return "qcom,aux-cfg8-settings";
>> +case PHY_AUX_CFG9:
>> +return "qcom,aux-cfg9-settings";
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +static int dp_parser_aux(struct dp_parser *parser)
>> +{
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +int len = 0, i = 0, j = 0, config_count = 0;
>> +const char *data;
>> +
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +const char *property = dp_get_phy_aux_config_property(i);
>> +
>> +data = of_get_property(of_node, property, &len);
>> +if (!data) {
>> +DRM_ERROR("Unable to read %s\n", property);
>> +goto error;
>> +}
>> +
>> +config_count = len - 1;
>> +if (config_count < 1 || /* minimum config count = 1 */
>> +config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
>> +DRM_ERROR("Invalid config count (%d) configs for %s\n",
>> +config_count, property);
>> +goto error;
>> +}
>> +
>> +parser->aux_cfg[i].offset = data[0];
>> +parser->aux_cfg[i].cfg_cnt = config_count;
>> +DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
>> +property,
>> +parser->aux_cfg[i].offset,
>> +parser->aux_cfg[i].cfg_cnt);
>> +for (j = 1; j < len; j++) {
>> +parser->aux_cfg[i].lut[j - 1] = data[j];
>> +DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
>> +property,
>> +i,
>> +parser->aux_cfg[i].lut[j - 1]);
>> +}
>> +}
>> +return 0;
>> +
>> +error:
>> +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
>> +parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
>> +}
>> +return -EINVAL;
>> +}
>> +
>> +static int dp_parser_misc(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct device_node *of_node = parser->pdev->dev.of_node;
>> +
>> +rc = of_property_read_u32(of_node,
>> +"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
>> +if (rc)
>> +parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_pinctrl(struct dp_parser *parser)
>> +{
>> +struct dp_pinctrl *pinctrl = &parser->pinctrl;
>> +
>> +pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
>> +
>> +if (IS_ERR_OR_NULL(pinctrl->pin)) {
>> +DRM_ERROR("failed to get pinctrl, rc=%d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->pin));
>> +return -EINVAL;
>> +}
>> +
>> +pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
>> +"mdss_dp_active");
>> +if (IS_ERR_OR_NULL(pinctrl->state_active)) {
>> +DRM_ERROR("failed to get pinctrl active state, %d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->state_active));
>> +return -EINVAL;
>> +}
>> +
>> +pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
>> +"mdss_dp_sleep");
>> +if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
>> +DRM_ERROR("failed to get pinctrl suspend state, %d\n",
>> +PTR_ERR_OR_ZERO(pinctrl->state_suspend));
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_gpio(struct dp_parser *parser)
>> +{
>> +struct device *dev = &parser->pdev->dev;
>> +struct device_node *of_node = dev->of_node;
>> +
>> +parser->usbplug_cc_gpio = of_get_named_gpio(of_node,
>> "qcom,usbplug-cc-gpio", 0);
>> +if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
>> +DRM_ERROR("usbplug-cc-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio",
>> 0);
>> +if (!gpio_is_valid(parser->aux_en_gpio)) {
>> +DRM_ERROR("aux-en-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +parser->aux_sel_gpio = of_get_named_gpio(of_node,
>> "qcom,aux-sel-gpio", 0);
>> +if (!gpio_is_valid(parser->aux_sel_gpio)) {
>> +DRM_ERROR("aux-sel-gpio not specified\n");
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static inline bool dp_parser_check_prefix(const char *clk_prefix,
>> const char *clk_name)
>> +{
>> +return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
>> +}
>> +
>> +static int dp_parser_init_clk_data(struct dp_parser *parser)
>> +{
>> +int num_clk = 0, i = 0, rc = 0;
>> +int core_clk_count = 0, ctrl_clk_count = 0;
>> +const char *clk_name;
>> +struct device *dev = &parser->pdev->dev;
>> +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
>> +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +num_clk = of_property_count_strings(dev->of_node, "clock-names");
>> +if (num_clk <= 0) {
>> +DRM_ERROR("no clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +for (i = 0; i < num_clk; i++) {
>> +rc = of_property_read_string_index(dev->of_node,
>> +"clock-names", i, &clk_name);
>> +if (rc) {
>> +DRM_ERROR("error reading clock-names %d\n", rc);
>> +return rc;
>> +}
>> +
>> +if (dp_parser_check_prefix("core", clk_name))
>> +core_clk_count++;
>> +
>> +if (dp_parser_check_prefix("ctrl", clk_name))
>> +ctrl_clk_count++;
>> +}
>> +
>> +/* Initialize the CORE power module */
>> +if (core_clk_count == 0) {
>> +DRM_ERROR("no core clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +core_power->num_clk = core_clk_count;
>> +core_power->clk_config = devm_kzalloc(dev,
>> +sizeof(struct dss_clk) * core_power->num_clk,
>> +GFP_KERNEL);
>> +if (!core_power->clk_config) {
>> +return -EINVAL;
>> +}
>> +
>> +/* Initialize the CTRL power module */
>> +if (ctrl_clk_count == 0) {
>> +DRM_ERROR("no ctrl clocks are defined\n");
>> +return -EINVAL;
>> +}
>> +
>> +ctrl_power->num_clk = ctrl_clk_count;
>> +ctrl_power->clk_config = devm_kzalloc(dev,
>> +sizeof(struct dss_clk) * ctrl_power->num_clk,
>> +GFP_KERNEL);
>> +if (!ctrl_power->clk_config) {
>> +ctrl_power->num_clk = 0;
>> +return -EINVAL;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_clock(struct dp_parser *parser)
>> +{
>> +int rc = 0, i = 0;
>> +int num_clk = 0;
>> +int core_clk_index = 0, ctrl_clk_index = 0;
>> +int core_clk_count = 0, ctrl_clk_count = 0;
>> +const char *clk_name;
>> +struct device *dev = &parser->pdev->dev;
>> +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
>> +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +core_power = &parser->mp[DP_CORE_PM];
>> +ctrl_power = &parser->mp[DP_CTRL_PM];
>> +
>> +rc =  dp_parser_init_clk_data(parser);
>> +if (rc) {
>> +DRM_ERROR("failed to initialize power data %d\n", rc);
>> +return -EINVAL;
>> +}
>> +
>> +core_clk_count = core_power->num_clk;
>> +ctrl_clk_count = ctrl_power->num_clk;
>> +
>> +num_clk = core_clk_count + ctrl_clk_count;
>> +
>> +for (i = 0; i < num_clk; i++) {
>> +rc = of_property_read_string_index(dev->of_node, "clock-names",
>> +i, &clk_name);
>> +if (rc) {
>> + DRM_ERROR("error reading clock-names %d\n", rc);
>> +return rc;
>> +}
>> +if (dp_parser_check_prefix("core", clk_name) &&
>> +core_clk_index < core_clk_count) {
>> +struct dss_clk *clk =
>> +&core_power->clk_config[core_clk_index];
>> +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
>> +clk->type = DSS_CLK_AHB;
>> +core_clk_index++;
>> +} else if (dp_parser_check_prefix("ctrl", clk_name) &&
>> +   ctrl_clk_index < ctrl_clk_count) {
>> +struct dss_clk *clk =
>> +&ctrl_power->clk_config[ctrl_clk_index];
>> +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
>> +ctrl_clk_index++;
>> +
>> +if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
>> +  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
>> +clk->type = DSS_CLK_PCLK;
>> +else
>> +clk->type = DSS_CLK_AHB;
>> +}
>> +}
>> +
>> +DRM_DEBUG_DP("clock parsing successful\n");
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_parser_parse(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +
>> +if (!parser) {
>> +DRM_ERROR("invalid input\n");
>> +return -EINVAL;
>> +}
>> +
>> +/* Default: We assume that PHY is shared between USB and DP (Combo
>> phy) */
>> +parser->combo_phy_en = true;
>> +
>> +rc = dp_parser_ctrl_res(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_aux(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_misc(parser);
>> +if (rc)
>> +return rc;
>> +
>> +rc = dp_parser_clock(parser);
>> +if (rc)
>> +return rc;
>> +
>> +/* Map the corresponding regulator information according to
>> + * version. Currently, since we only have one supported platform,
>> + * mapping the regulator directly.
>> + */
>> +parser->regulator_cfg = &sdm845_dp_reg_cfg;
>> +
>> +rc = dp_parser_gpio(parser);
>> +if (rc) {
>> +DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is
>> disabled\n");
>> +parser->combo_phy_en = false;
>> +return rc;
>> +}
>> +
>> +rc = dp_parser_pinctrl(parser);
>> +return rc;
>> +}
>> +
>> +struct dp_parser *dp_parser_get(struct platform_device *pdev)
>> +{
>> +struct dp_parser *parser;
>> +
>> +parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
>> +if (!parser)
>> +return ERR_PTR(-ENOMEM);
>> +
>> +parser->parse = dp_parser_parse;
>> +parser->pdev = pdev;
>> +
>> +return parser;
>> +}
>> +
>> +void dp_parser_put(struct dp_parser *parser)
>> +{
>> +
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h
>> b/drivers/gpu/drm/msm/dp/dp_parser.h
>> new file mode 100644
>> index 0000000..b606b40
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
>> @@ -0,0 +1,222 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_PARSER_H_
>> +#define _DP_PARSER_H_
>> +
>> +#define DP_LABEL "MDSS DP DISPLAY"
>> +#define AUX_CFG_LEN10
>> +#define DP_MAX_PIXEL_CLK_KHZ675000
>> +
>> +enum dp_pm_type {
>> +DP_CORE_PM,
>> +DP_CTRL_PM,
>> +DP_PHY_PM,
>> +DP_MAX_PM
>> +};
>> +
>> +struct dss_io_data {
>> +u32 len;
>> +void __iomem *base;
>> +};
>> +
>> +static inline const char *dp_parser_pm_name(enum dp_pm_type module)
>> +{
>> +switch (module) {
>> +case DP_CORE_PM:return "DP_CORE_PM";
>> +case DP_CTRL_PM:return "DP_CTRL_PM";
>> +case DP_PHY_PM:return "DP_PHY_PM";
>> +default:return "???";
>> +}
>> +}
>> +
>> +/**
>> + * struct dp_display_data  - display related device tree data.
>> + *
>> + * @ctrl_node: referece to controller device
>> + * @phy_node:  reference to phy device
>> + * @is_active: is the controller currently active
>> + * @name: name of the display
>> + * @display_type: type of the display
>> + */
>> +struct dp_display_data {
>> +struct device_node *ctrl_node;
>> +struct device_node *phy_node;
>> +bool is_active;
>> +const char *name;
>> +const char *display_type;
>> +};
>> +
>> +/**
>> + * struct dp_ctrl_resource - controller's IO related data
>> + *
>> + * @dp_ahb: controller's ahb mapped memory address
>> + * @dp_aux: controller's aux mapped memory address
>> + * @dp_link: controller's link mapped memory address
>> + * @dp_p0: controller's p0 mapped memory address
>> + * @phy_io: phy's mapped memory address
>> + * @ln_tx0_io: USB-DP lane TX0's mapped memory address
>> + * @ln_tx1_io: USB-DP lane TX1's mapped memory address
>> + * @dp_cc_io: DP cc's mapped memory address
>> + * @qfprom_io: qfprom's mapped memory address
>> + * @dp_pll_io: DP PLL mapped memory address
>> + * @usb3_dp_com: USB3 DP PHY combo mapped memory address
>> + */
>> +struct dp_io {
>> +struct dss_io_data ctrl_io;
>> +struct dss_io_data dp_ahb;
>> +struct dss_io_data dp_aux;
>> +struct dss_io_data dp_link;
>> +struct dss_io_data dp_p0;
>> +struct dss_io_data phy_io;
>> +struct dss_io_data ln_tx0_io;
>> +struct dss_io_data ln_tx1_io;
>> +struct dss_io_data dp_cc_io;
>> +struct dss_io_data qfprom_io;
>> +struct dss_io_data dp_pll_io;
>> +struct dss_io_data usb3_dp_com;
>> +};
>> +
>> +/**
>> + * struct dp_pinctrl - DP's pin control
>> + *
>> + * @pin: pin-controller's instance
>> + * @state_active: active state pin control
>> + * @state_hpd_active: hpd active state pin control
>> + * @state_suspend: suspend state pin control
>> + */
>> +struct dp_pinctrl {
>> +struct pinctrl *pin;
>> +struct pinctrl_state *state_active;
>> +struct pinctrl_state *state_hpd_active;
>> +struct pinctrl_state *state_suspend;
>> +};
>> +
>> +#define DP_ENUM_STR(x)#x
>> +#define DP_AUX_CFG_MAX_VALUE_CNT 3
>> +/**
>> + * struct dp_aux_cfg - DP's AUX configuration settings
>> + *
>> + * @cfg_cnt: count of the configurable settings for the AUX register
>> + * @current_index: current index of the AUX config lut
>> + * @offset: register offset of the AUX config register
>> + * @lut: look up table for the AUX config values for this register
>> + */
>> +struct dp_aux_cfg {
>> +u32 cfg_cnt;
>> +u32 current_index;
>> +u32 offset;
>> +u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
>> +};
>> +
>> +/* PHY AUX config registers */
>> +enum dp_phy_aux_config_type {
>> +PHY_AUX_CFG0,
>> +PHY_AUX_CFG1,
>> +PHY_AUX_CFG2,
>> +PHY_AUX_CFG3,
>> +PHY_AUX_CFG4,
>> +PHY_AUX_CFG5,
>> +PHY_AUX_CFG6,
>> +PHY_AUX_CFG7,
>> +PHY_AUX_CFG8,
>> +PHY_AUX_CFG9,
>> +PHY_AUX_CFG_MAX,
>> +};
>> +
>> +#define DP_DEV_REGULATOR_MAX4
>> +
>> +/* Regulators for DP devices */
>> +struct dp_reg_entry {
>> +char name[32];
>> +int enable_load;
>> +int disable_load;
>> +};
>> +
>> +struct dp_regulator_cfg {
>> +int num;
>> +struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
>> +};
>> +
>> +
>> +static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
>> +{
>> +switch (cfg_type) {
>> +case PHY_AUX_CFG0:
>> +return DP_ENUM_STR(PHY_AUX_CFG0);
>> +case PHY_AUX_CFG1:
>> +return DP_ENUM_STR(PHY_AUX_CFG1);
>> +case PHY_AUX_CFG2:
>> +return DP_ENUM_STR(PHY_AUX_CFG2);
>> +case PHY_AUX_CFG3:
>> +return DP_ENUM_STR(PHY_AUX_CFG3);
>> +case PHY_AUX_CFG4:
>> +return DP_ENUM_STR(PHY_AUX_CFG4);
>> +case PHY_AUX_CFG5:
>> +return DP_ENUM_STR(PHY_AUX_CFG5);
>> +case PHY_AUX_CFG6:
>> +return DP_ENUM_STR(PHY_AUX_CFG6);
>> +case PHY_AUX_CFG7:
>> +return DP_ENUM_STR(PHY_AUX_CFG7);
>> +case PHY_AUX_CFG8:
>> +return DP_ENUM_STR(PHY_AUX_CFG8);
>> +case PHY_AUX_CFG9:
>> +return DP_ENUM_STR(PHY_AUX_CFG9);
>> +default:
>> +return "unknown";
>> +}
>> +}
>> +
>> +/**
>> + * struct dp_parser - DP parser's data exposed to clients
>> + *
>> + * @pdev: platform data of the client
>> + * @mp: gpio, regulator and clock related data
>> + * @pinctrl: pin-control related data
>> + * @aux_en_gpio: GPIO to control AUX data when using combo PHY
>> + * @aux_sel_gpio: GPIO to control plug orientation when using combo
>> PHY
>> + * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
>> + * @combo_phy_en: Boolean to check whether combo PHY is used
>> + * @disp_data: controller's display related data
>> + * @parse: function to be called by client to parse device tree.
>> + */
>> +struct dp_parser {
>> +struct platform_device *pdev;
>> +struct dss_module_power mp[DP_MAX_PM];
>> +struct dp_pinctrl pinctrl;
>> +unsigned int aux_en_gpio;
>> +unsigned int aux_sel_gpio;
>> +unsigned int usbplug_cc_gpio;
>> +bool combo_phy_en;
>> +struct dp_io io;
>> +struct dp_display_data disp_data;
>> +const struct dp_regulator_cfg *regulator_cfg;
>> +u8 l_map[4];
>> +struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
>> +u32 max_pclk_khz;
>> +
>> +int (*parse)(struct dp_parser *parser);
>> +};
>> +
>> +/**
>> + * dp_parser_get() - get the DP's device tree parser module
>> + *
>> + * @pdev: platform data of the client
>> + * return: pointer to dp_parser structure.
>> + *
>> + * This function provides client capability to parse the
>> + * device tree and populate the data structures. The data
>> + * related to clock, regulators, pin-control and other
>> + * can be parsed using this module.
>> + */
>> +struct dp_parser *dp_parser_get(struct platform_device *pdev);
>> +
>> +/**
>> + * dp_parser_put() - cleans the dp_parser module
>> + *
>> + * @parser: pointer to the parser's data.
>> + */
>> +void dp_parser_put(struct dp_parser *parser);
>> +#endif
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c
>> b/drivers/gpu/drm/msm/dp/dp_power.c
>> new file mode 100644
>> index 0000000..3fa4c9b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
>> @@ -0,0 +1,558 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
>> +
>> +#include <linux/clk.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/of_gpio.h>
>> +#include "dp_power.h"
>> +
>> +struct dp_power_private {
>> +struct dp_parser *parser;
>> +struct platform_device *pdev;
>> +struct clk *pixel_clk_rcg;
>> +struct clk *link_clk_src;
>> +struct clk *pixel_provider;
>> +struct clk *link_provider;
>> +struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
>> +
>> +struct dp_power dp_power;
>> +};
>> +
>> +static void dp_power_regulator_disable(struct dp_power_private 
>> *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +int num = power->parser->regulator_cfg->num;
>> +int i;
>> +
>> +DBG("");
>> +for (i = num - 1; i >= 0; i--)
>> +if (regs[i].disable_load >= 0)
>> +regulator_set_load(s[i].consumer,
>> +   regs[i].disable_load);
>> +
>> +regulator_bulk_disable(num, s);
>> +}
>> +
>> +static int dp_power_regulator_enable(struct dp_power_private *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +int num = power->parser->regulator_cfg->num;
>> +int ret, i;
>> +
>> +DBG("");
>> +for (i = 0; i < num; i++) {
>> +if (regs[i].enable_load >= 0) {
>> +ret = regulator_set_load(s[i].consumer,
>> + regs[i].enable_load);
>> +if (ret < 0) {
>> +pr_err("regulator %d set op mode failed, %d\n",
>> +i, ret);
>> +goto fail;
>> +}
>> +}
>> +}
>> +
>> +ret = regulator_bulk_enable(num, s);
>> +if (ret < 0) {
>> +pr_err("regulator enable failed, %d\n", ret);
>> +goto fail;
>> +}
>> +
>> +return 0;
>> +
>> +fail:
>> +for (i--; i >= 0; i--)
>> +regulator_set_load(s[i].consumer, regs[i].disable_load);
>> +return ret;
>> +}
>> +
>> +static int dp_power_regulator_init(struct dp_power_private *power)
>> +{
>> +struct regulator_bulk_data *s = power->supplies;
>> +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
>> +struct platform_device *pdev = power->pdev;
>> +int num = power->parser->regulator_cfg->num;
>> +int i, ret;
>> +
>> +for (i = 0; i < num; i++)
>> +s[i].supply = regs[i].name;
>> +
>> +ret = devm_regulator_bulk_get(&pdev->dev, num, s);
>> +if (ret < 0) {
>> +pr_err("%s: failed to init regulator, ret=%d\n",
>> +__func__, ret);
>> +return ret;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_pinctrl_set(struct dp_power_private *power, bool
>> active)
>> +{
>> +int rc = -EFAULT;
>> +struct pinctrl_state *pin_state;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return 0;
>> +
>> +pin_state = active ? parser->pinctrl.state_active
>> +: parser->pinctrl.state_suspend;
>> +
>> +rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
>> +if (rc) {
>> +DRM_ERROR("can not set %s pins\n",
>> +active ? "dp_active" : "dp_sleep");
>> +return rc;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_init(struct dp_power_private *power)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *core, *ctrl;
>> +struct device *dev = &power->pdev->dev;
>> +
>> +core = &power->parser->mp[DP_CORE_PM];
>> +ctrl = &power->parser->mp[DP_CTRL_PM];
>> +
>> +if (power->parser->pll && power->parser->pll->get_provider) {
>> +rc = power->parser->pll->get_provider(power->parser->pll,
>> +&power->link_provider, &power->pixel_provider);
>> +if (rc) {
>> +pr_info("%s: can't get provider from pll, don't set parent\n",
>> +__func__);
>> +return 0;
>> +}
>> +}
>> +
>> +rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to get %s clk. err=%d\n",
>> +dp_parser_pm_name(DP_CORE_PM), rc);
>> +return rc;
>> +}
>> +
>> +rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to get %s clk. err=%d\n",
>> +dp_parser_pm_name(DP_CTRL_PM), rc);
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return -ENODEV;
>> +}
>> +
>> +power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
>> +if (IS_ERR(power->pixel_clk_rcg)) {
>> +DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
>> +power->pixel_clk_rcg = NULL;
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return -ENODEV;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_deinit(struct dp_power_private *power)
>> +{
>> +struct dss_module_power *core, *ctrl;
>> +
>> +core = &power->parser->mp[DP_CORE_PM];
>> +ctrl = &power->parser->mp[DP_CTRL_PM];
>> +
>> +if (!core || !ctrl) {
>> +DRM_ERROR("invalid power_data\n");
>> +return -EINVAL;
>> +}
>> +
>> +msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
>> +msm_dss_put_clk(core->clk_config, core->num_clk);
>> +return 0;
>> +}
>> +
>> +static int dp_power_clk_set_rate(struct dp_power_private *power,
>> +enum dp_pm_type module, bool enable)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *mp = &power->parser->mp[module];
>> +
>> +if (enable) {
>> +rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
>> +if (rc) {
>> +DRM_ERROR("failed to set clks rate.\n");
>> +return rc;
>> +}
>> +}
>> +
>> +rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
>> +return rc;
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +int dp_power_clk_enable(struct dp_power *dp_power,
>> +enum dp_pm_type pm_type, bool enable)
>> +{
>> +int rc = 0;
>> +struct dss_module_power *mp;
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +mp = &power->parser->mp[pm_type];
>> +
>> +if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
>> +DRM_ERROR("unsupported power module: %s\n",
>> +dp_parser_pm_name(pm_type));
>> +return -EINVAL;
>> +}
>> +
>> +if (enable) {
>> +if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
>> +DRM_DEBUG_DP("core clks already enabled\n");
>> +return 0;
>> +}
>> +
>> +if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
>> +DRM_DEBUG_DP("links clks already enabled\n");
>> +return 0;
>> +}
>> +
>> +if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
>> +DRM_DEBUG_DP("Need to enable core clks before link clks\n");
>> +
>> +rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to enable clks: %s. err=%d\n",
>> +dp_parser_pm_name(DP_CORE_PM), rc);
>> +return rc;
>> +}
>> +dp_power->core_clks_on = true;
>> +}
>> +}
>> +
>> +rc = dp_power_clk_set_rate(power, pm_type, enable);
>> +if (rc) {
>> +DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
>> +enable ? "enable" : "disable",
>> +dp_parser_pm_name(pm_type), rc);
>> +return rc;
>> +}
>> +
>> +if (pm_type == DP_CORE_PM)
>> +dp_power->core_clks_on = enable;
>> +else
>> +dp_power->link_clks_on = enable;
>> +
>> +DRM_DEBUG_DP("%s clocks for %s\n",
>> +enable ? "enable" : "disable",
>> +dp_parser_pm_name(pm_type));
>> +DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
>> +dp_power->link_clks_on ? "on" : "off",
>> +dp_power->core_clks_on ? "on" : "off");
>> +
>> +return 0;
>> +}
>> +
>> +static int dp_power_request_gpios(struct dp_power_private *power)
>> +{
>> +int rc = 0;
>> +struct device *dev = &power->pdev->dev;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (gpio_is_valid(parser->aux_en_gpio)) {
>> +rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
>> +if (rc) {
>> +DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +if (gpio_is_valid(parser->aux_sel_gpio)) {
>> +rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
>> +if (rc) {
>> +DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +if (gpio_is_valid(parser->usbplug_cc_gpio)) {
>> +rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
>> +if (rc) {
>> +DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
>> +return rc;
>> +}
>> +}
>> +return 0;
>> +}
>> +
>> +static void dp_power_set_gpio(struct dp_power_private *power, bool
>> flip)
>> +{
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (gpio_is_valid(parser->aux_sel_gpio))
>> +gpio_direction_output(parser->aux_sel_gpio, flip);
>> +
>> +if (gpio_is_valid(parser->aux_en_gpio))
>> +gpio_direction_output(parser->aux_en_gpio, 0);
>> +
>> +if (gpio_is_valid(parser->usbplug_cc_gpio))
>> +gpio_set_value(parser->usbplug_cc_gpio, 0);
>> +}
>> +
>> +static int dp_power_config_gpios(struct dp_power_private *power, bool
>> flip)
>> +{
>> +int rc = 0;
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return rc;
>> +
>> +rc = dp_power_request_gpios(power);
>> +if (rc) {
>> +DRM_ERROR("gpio request failed\n");
>> +return rc;
>> +}
>> +
>> +dp_power_set_gpio(power, flip);
>> +return 0;
>> +}
>> +
>> +static void dp_power_disable_gpios(struct dp_power_private *power)
>> +{
>> +struct dp_parser *parser = power->parser;
>> +
>> +if (!parser->combo_phy_en)
>> +return;
>> +
>> +gpio_set_value(parser->aux_sel_gpio, 0);
>> +gpio_set_value(parser->aux_en_gpio, 0);
>> +gpio_set_value(parser->usbplug_cc_gpio, 0);
>> +gpio_free(parser->aux_sel_gpio);
>> +gpio_free(parser->aux_en_gpio);
>> +gpio_free(parser->usbplug_cc_gpio);
>> +}
>> +
>> +int dp_power_client_init(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +return -EINVAL;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +pm_runtime_enable(&power->pdev->dev);
>> +
>> +rc = dp_power_regulator_init(power);
>> +if (rc) {
>> +DRM_ERROR("failed to init regulators %d\n", rc);
>> +goto error;
>> +}
>> +
>> +rc = dp_power_clk_init(power);
>> +if (rc) {
>> +DRM_ERROR("failed to init clocks %d\n", rc);
>> +goto error;
>> +}
>> +return 0;
>> +
>> +error:
>> +pm_runtime_disable(&power->pdev->dev);
>> +return rc;
>> +}
>> +
>> +void dp_power_client_deinit(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +return;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +dp_power_clk_deinit(power);
>> +pm_runtime_disable(&power->pdev->dev);
>> +
>> +}
>> +
>> +int dp_power_set_link_clk_parent(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +u32 num;
>> +struct dss_clk *cfg;
>> +char *name = "ctrl_link_clk";
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +rc = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +num = power->parser->mp[DP_CTRL_PM].num_clk;
>> +cfg = power->parser->mp[DP_CTRL_PM].clk_config;
>> +
>> +while (num && strcmp(cfg->clk_name, name)) {
>> +num--;
>> +cfg++;
>> +}
>> +
>> +if (num && power->link_provider) {
>> +power->link_clk_src = clk_get_parent(cfg->clk);
>> +if (power->link_clk_src) {
>> +clk_set_parent(power->link_clk_src, power->link_provider);
>> +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
>> +__clk_get_name(power->link_provider),
>> +__clk_get_name(power->link_clk_src));
>> +} else {
>> +DRM_ERROR("couldn't get parent for clk=%s\n", name);
>> +rc = -EINVAL;
>> +}
>> +} else {
>> +DRM_ERROR("%s clock could not be set parent\n", name);
>> +rc = -EINVAL;
>> +}
>> +exit:
>> +return rc;
>> +}
>> +
>> +int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +if (power->pixel_clk_rcg && power->pixel_provider) {
>> +rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
>> +if (rc) {
>> +DRM_ERROR("failed to set parent clk src, %d\n", rc);
>> +return rc;
>> +}
>> +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
>> +__clk_get_name(power->pixel_provider),
>> +__clk_get_name(power->pixel_clk_rcg));
>> +}
>> +
>> +return 0;
>> +}
>> +
>> +int dp_power_init(struct dp_power *dp_power, bool flip)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +
>> +if (!dp_power) {
>> +DRM_ERROR("invalid power data\n");
>> +rc = -EINVAL;
>> +goto exit;
>> +}
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +pm_runtime_get_sync(&power->pdev->dev);
>> +rc = dp_power_regulator_enable(power);
>> +if (rc) {
>> +DRM_ERROR("failed to enable regulators, %d\n", rc);
>> +goto exit;
>> +}
>> +
>> +rc = dp_power_pinctrl_set(power, true);
>> +if (rc) {
>> +DRM_ERROR("failed to set pinctrl state, %d\n", rc);
>> +goto err_pinctrl;
>> +}
>> +
>> +rc = dp_power_config_gpios(power, flip);
>> +if (rc) {
>> +DRM_ERROR("failed to enable gpios, %d\n", rc);
>> +goto err_gpio;
>> +}
>> +
>> +rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
>> +if (rc) {
>> +DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
>> +goto err_clk;
>> +}
>> +
>> +return 0;
>> +
>> +err_clk:
>> +dp_power_disable_gpios(power);
>> +err_gpio:
>> +dp_power_pinctrl_set(power, false);
>> +err_pinctrl:
>> +dp_power_regulator_disable(power);
>> +exit:
>> +pm_runtime_put_sync(&power->pdev->dev);
>> +return rc;
>> +}
>> +
>> +int dp_power_deinit(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +dp_power_clk_enable(dp_power, DP_CORE_PM, false);
>> +dp_power_disable_gpios(power);
>> +dp_power_pinctrl_set(power, false);
>> +dp_power_regulator_disable(power);
>> +pm_runtime_put_sync(&power->pdev->dev);
>> +return 0;
>> +}
>> +
>> +struct dp_power *dp_power_get(struct dp_parser *parser)
>> +{
>> +int rc = 0;
>> +struct dp_power_private *power;
>> +struct dp_power *dp_power;
>> +
>> +if (!parser) {
>> +DRM_ERROR("invalid input\n");
>> +rc = -EINVAL;
>> +goto error;
>> +}
>> +
>> +power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
>> +if (!power) {
>> +rc = -ENOMEM;
>> +goto error;
>> +}
>> +
>> +power->parser = parser;
>> +power->pdev = parser->pdev;
>> +
>> +dp_power = &power->dp_power;
>> +
>> +return dp_power;
>> +error:
>> +return ERR_PTR(rc);
>> +}
>> +
>> +void dp_power_put(struct dp_power *dp_power)
>> +{
>> +struct dp_power_private *power = NULL;
>> +
>> +if (!dp_power)
>> +return;
>> +
>> +power = container_of(dp_power, struct dp_power_private, dp_power);
>> +
>> +devm_kfree(&power->pdev->dev, power);
>> +}
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h
>> b/drivers/gpu/drm/msm/dp/dp_power.h
>> new file mode 100644
>> index 0000000..40d7e73
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
>> @@ -0,0 +1,52 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2012-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_POWER_H_
>> +#define _DP_POWER_H_
>> +
>> +#include "dp_parser.h"
>> +
>> +/**
>> + * sruct dp_power - DisplayPort's power related data
>> + *
>> + * @init: initializes the regulators/core clocks/GPIOs/pinctrl
>> + * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
>> + * @clk_enable: enable/disable the DP clocks
>> + * @set_link_clk_parent: set the parent of DP link clock
>> + * @set_pixel_clk_parent: set the parent of DP pixel clock
>> + */
>> +struct dp_power {
>> +bool core_clks_on;
>> +bool link_clks_on;
>> +};
>> +
>> +int dp_power_init(struct dp_power *power, bool flip);
>> +int dp_power_deinit(struct dp_power *power);
>> +int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type
>> pm_type,
>> +bool enable);
>> +int dp_power_set_link_clk_parent(struct dp_power *power);
>> +int dp_power_set_pixel_clk_parent(struct dp_power *power);
>> +int dp_power_client_init(struct dp_power *power);
>> +void dp_power_client_deinit(struct dp_power *power);
>> +
>> +/**
>> + * dp_power_get() - configure and get the DisplayPort power module
>> data
>> + *
>> + * @parser: instance of parser module
>> + * return: pointer to allocated power module data
>> + *
>> + * This API will configure the DisplayPort's power module and 
>> provides
>> + * methods to be called by the client to configure the power related
>> + * modueles.
>> + */
>> +struct dp_power *dp_power_get(struct dp_parser *parser);
>> +
>> +/**
>> + * dp_power_put() - release the power related resources
>> + *
>> + * @power: pointer to the power module's data
>> + */
>> +void dp_power_put(struct dp_power *power);
>> +#endif /* _DP_POWER_H_ */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h
>> b/drivers/gpu/drm/msm/dp/dp_reg.h
>> new file mode 100644
>> index 0000000..5468f7b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
>> @@ -0,0 +1,488 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017-2019, The Linux Foundation. All rights 
>> reserved.
>> + */
>> +
>> +#ifndef _DP_REG_H_
>> +#define _DP_REG_H_
>> +
>> +/* DP_TX Registers */
>> +#define REG_DP_HW_VERSION(0x00000000)
>> +
>> +#define REG_DP_SW_RESET(0x00000010)
>> +#define DP_SW_RESET(0x00000001)
>> +
>> +#define REG_DP_PHY_CTRL(0x00000014)
>> +#define DP_PHY_CTRL_SW_RESET_PLL(0x00000001)
>> +#define DP_PHY_CTRL_SW_RESET(0x00000004)
>> +
>> +#define REG_DP_CLK_CTRL(0x00000018)
>> +#define REG_DP_CLK_ACTIVE(0x0000001C)
>> +#define REG_DP_INTR_STATUS(0x00000020)
>> +#define REG_DP_INTR_STATUS2(0x00000024)
>> +#define REG_DP_INTR_STATUS3(0x00000028)
>> +
>> +#define REG_DP_DP_HPD_CTRL(0x00000000)
>> +#define DP_DP_HPD_CTRL_HPD_EN(0x00000001)
>> +
>> +#define REG_DP_DP_HPD_INT_STATUS(0x00000004)
>> +
>> +#define REG_DP_DP_HPD_INT_ACK(0x00000008)
>> +#define DP_DP_HPD_PLUG_INT_ACK(0x00000001)
>> +#define DP_DP_IRQ_HPD_INT_ACK(0x00000002)
>> +#define DP_DP_HPD_REPLUG_INT_ACK(0x00000004)
>> +#define DP_DP_HPD_UNPLUG_INT_ACK(0x00000008)
>> +
>> +#define REG_DP_DP_HPD_INT_MASK(0x0000000C)
>> +#define DP_DP_HPD_PLUG_INT_MASK(0x00000001)
>> +#define DP_DP_IRQ_HPD_INT_MASK(0x00000002)
>> +#define DP_DP_HPD_REPLUG_INT_MASK(0x00000004)
>> +#define DP_DP_HPD_UNPLUG_INT_MASK(0x00000008)
>> +
>> +#define REG_DP_DP_HPD_REFTIMER(0x00000018)
>> +#define REG_DP_DP_HPD_EVENT_TIME_0(0x0000001C)
>> +#define REG_DP_DP_HPD_EVENT_TIME_1(0x00000020)
>> +
>> +#define REG_DP_AUX_CTRL(0x00000030)
>> +#define DP_AUX_CTRL_ENABLE(0x00000001)
>> +#define DP_AUX_CTRL_RESET(0x00000002)
>> +
>> +#define REG_DP_AUX_DATA(0x00000034)
>> +#define DP_AUX_DATA_READ(0x00000001)
>> +#define DP_AUX_DATA_WRITE(0x00000000)
>> +#define DP_AUX_DATA_OFFSET(0x00000008)
>> +#define DP_AUX_DATA_INDEX_OFFSET(0x00000010)
>> +#define DP_AUX_DATA_MASK(0x0000ff00)
>> +#define DP_AUX_DATA_INDEX_WRITE(0x80000000)
>> +
>> +#define REG_DP_AUX_TRANS_CTRL(0x00000038)
>> +#define DP_AUX_TRANS_CTRL_I2C(0x00000100)
>> +#define DP_AUX_TRANS_CTRL_GO(0x00000200)
>> +#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR(0x00000400)
>> +#define DP_AUX_TRANS_CTRL_NO_SEND_STOP(0x00000800)
>> +
>> +#define REG_DP_TIMEOUT_COUNT(0x0000003C)
>> +#define REG_DP_AUX_LIMITS(0x00000040)
>> +#define REG_DP_AUX_STATUS(0x00000044)
>> +
>> +#define DP_DPCD_CP_IRQ(0x201)
>> +#define DP_DPCD_RXSTATUS(0x69493)
>> +
>> +#define DP_INTERRUPT_TRANS_NUM(0x000000A0)
>> +
>> +#define REG_DP_MAINLINK_CTRL(0x00000000)
>> +#define DP_MAINLINK_CTRL_ENABLE(0x00000001)
>> +#define DP_MAINLINK_CTRL_RESET(0x00000002)
>> +#define DP_MAINLINK_FB_BOUNDARY_SEL(0x02000000)
>> +
>> +#define REG_DP_STATE_CTRL(0x00000004)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1(0x00000001)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2(0x00000002)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3(0x00000004)
>> +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4(0x00000008)
>> +#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE(0x00000010)
>> +#define DP_STATE_CTRL_LINK_PRBS7(0x00000020)
>> +#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN(0x00000040)
>> +#define DP_STATE_CTRL_SEND_VIDEO(0x00000080)
>> +#define DP_STATE_CTRL_PUSH_IDLE (0x00000100)
>> +
>> +#define REG_DP_CONFIGURATION_CTRL(0x00000008)
>> +#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK(0x00000001)
>> +#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
>> +#define DP_CONFIGURATION_CTRL_P_INTERLACED(0x00000004)
>> +#define DP_CONFIGURATION_CTRL_INTERLACED_BTF(0x00000008)
>> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES(0x00000010)
>> +#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING(0x00000040)
>> +#define DP_CONFIGURATION_CTRL_SEND_VSC(0x00000080)
>> +#define DP_CONFIGURATION_CTRL_BPC(0x00000100)
>> +#define DP_CONFIGURATION_CTRL_ASSR(0x00000400)
>> +#define DP_CONFIGURATION_CTRL_RGB_YUV(0x00000800)
>> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV(0x00002000)
>> +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
>> +#define DP_CONFIGURATION_CTRL_BPC_SHIFT       (0x08)
>> +#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT      (0x0D)
>> +
>> +#define REG_DP_SOFTWARE_MVID(0x00000010)
>> +#define REG_DP_SOFTWARE_NVID(0x00000018)
>> +#define REG_DP_TOTAL_HOR_VER(0x0000001C)
>> +#define REG_DP_START_HOR_VER_FROM_SYNC(0x00000020)
>> +#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY(0x00000024)
>> +#define REG_DP_ACTIVE_HOR_VER(0x00000028)
>> +
>> +#define REG_DP_MISC1_MISC0(0x0000002C)
>> +#define DP_MISC0_SYNCHRONOUS_CLK(0x00000001)
>> +#define DP_MISC0_COLORIMETRY_CFG_SHIFT(0x00000001)
>> +#define DP_MISC0_TEST_BITS_DEPTH_SHIFT(0x00000005)
>> +
>> +#define REG_DP_VALID_BOUNDARY(0x00000030)
>> +#define REG_DP_VALID_BOUNDARY_2(0x00000034)
>> +
>> +#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING(0x00000038)
>> +#define LANE0_MAPPING_SHIFT(0x00000000)
>> +#define LANE1_MAPPING_SHIFT(0x00000002)
>> +#define LANE2_MAPPING_SHIFT(0x00000004)
>> +#define LANE3_MAPPING_SHIFT(0x00000006)
>> +
>> +#define REG_DP_MAINLINK_READY(0x00000040)
>> +#define DP_MAINLINK_READY_FOR_VIDEO(0x00000001)
>> +#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT(0x00000003)
>> +
>> +#define REG_DP_MAINLINK_LEVELS(0x00000044)
>> +#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2(0x00000002)
>> +
>> +
>> +#define REG_DP_TU(0x0000004C)
>> +
>> +#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET(0x00000054)
>> +#define DP_HBR2_ERM_PATTERN(0x00010000)
>> +
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0(0x000000C0)
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1(0x000000C4)
>> +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2(0x000000C8)
>> +
>> +#define MMSS_DP_MISC1_MISC0(0x0000002C)
>> +#define MMSS_DP_AUDIO_TIMING_GEN(0x00000080)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_32(0x00000084)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_32(0x00000088)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_44(0x0000008C)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_44(0x00000090)
>> +#define MMSS_DP_AUDIO_TIMING_RBR_48(0x00000094)
>> +#define MMSS_DP_AUDIO_TIMING_HBR_48(0x00000098)
>> +
>> +#define MMSS_DP_PSR_CRC_RG(0x00000154)
>> +#define MMSS_DP_PSR_CRC_B(0x00000158)
>> +
>> +#define REG_DP_COMPRESSION_MODE_CTRL(0x00000180)
>> +
>> +#define MMSS_DP_AUDIO_CFG(0x00000200)
>> +#define MMSS_DP_AUDIO_STATUS(0x00000204)
>> +#define MMSS_DP_AUDIO_PKT_CTRL(0x00000208)
>> +#define MMSS_DP_AUDIO_PKT_CTRL2(0x0000020C)
>> +#define MMSS_DP_AUDIO_ACR_CTRL(0x00000210)
>> +#define MMSS_DP_AUDIO_CTRL_RESET(0x00000214)
>> +
>> +#define MMSS_DP_SDP_CFG(0x00000228)
>> +#define MMSS_DP_SDP_CFG2(0x0000022C)
>> +#define MMSS_DP_AUDIO_TIMESTAMP_0(0x00000230)
>> +#define MMSS_DP_AUDIO_TIMESTAMP_1(0x00000234)
>> +
>> +#define MMSS_DP_AUDIO_STREAM_0(0x00000240)
>> +#define MMSS_DP_AUDIO_STREAM_1(0x00000244)
>> +
>> +#define MMSS_DP_EXTENSION_0(0x00000250)
>> +#define MMSS_DP_EXTENSION_1(0x00000254)
>> +#define MMSS_DP_EXTENSION_2(0x00000258)
>> +#define MMSS_DP_EXTENSION_3(0x0000025C)
>> +#define MMSS_DP_EXTENSION_4(0x00000260)
>> +#define MMSS_DP_EXTENSION_5(0x00000264)
>> +#define MMSS_DP_EXTENSION_6(0x00000268)
>> +#define MMSS_DP_EXTENSION_7(0x0000026C)
>> +#define MMSS_DP_EXTENSION_8(0x00000270)
>> +#define MMSS_DP_EXTENSION_9(0x00000274)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_0(0x00000278)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_1(0x0000027C)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_2(0x00000280)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_3(0x00000284)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_4(0x00000288)
>> +#define MMSS_DP_AUDIO_COPYMANAGEMENT_5(0x0000028C)
>> +#define MMSS_DP_AUDIO_ISRC_0(0x00000290)
>> +#define MMSS_DP_AUDIO_ISRC_1(0x00000294)
>> +#define MMSS_DP_AUDIO_ISRC_2(0x00000298)
>> +#define MMSS_DP_AUDIO_ISRC_3(0x0000029C)
>> +#define MMSS_DP_AUDIO_ISRC_4(0x000002A0)
>> +#define MMSS_DP_AUDIO_ISRC_5(0x000002A4)
>> +#define MMSS_DP_AUDIO_INFOFRAME_0(0x000002A8)
>> +#define MMSS_DP_AUDIO_INFOFRAME_1(0x000002AC)
>> +#define MMSS_DP_AUDIO_INFOFRAME_2(0x000002B0)
>> +
>> +#define MMSS_DP_GENERIC0_0(0x00000300)
>> +#define MMSS_DP_GENERIC0_1(0x00000304)
>> +#define MMSS_DP_GENERIC0_2(0x00000308)
>> +#define MMSS_DP_GENERIC0_3(0x0000030C)
>> +#define MMSS_DP_GENERIC0_4(0x00000310)
>> +#define MMSS_DP_GENERIC0_5(0x00000314)
>> +#define MMSS_DP_GENERIC0_6(0x00000318)
>> +#define MMSS_DP_GENERIC0_7(0x0000031C)
>> +#define MMSS_DP_GENERIC0_8(0x00000320)
>> +#define MMSS_DP_GENERIC0_9(0x00000324)
>> +#define MMSS_DP_GENERIC1_0(0x00000328)
>> +#define MMSS_DP_GENERIC1_1(0x0000032C)
>> +#define MMSS_DP_GENERIC1_2(0x00000330)
>> +#define MMSS_DP_GENERIC1_3(0x00000334)
>> +#define MMSS_DP_GENERIC1_4(0x00000338)
>> +#define MMSS_DP_GENERIC1_5(0x0000033C)
>> +#define MMSS_DP_GENERIC1_6(0x00000340)
>> +#define MMSS_DP_GENERIC1_7(0x00000344)
>> +#define MMSS_DP_GENERIC1_8(0x00000348)
>> +#define MMSS_DP_GENERIC1_9(0x0000034C)
>> +
>> +#define MMSS_DP_VSCEXT_0(0x000002D0)
>> +#define MMSS_DP_VSCEXT_1(0x000002D4)
>> +#define MMSS_DP_VSCEXT_2(0x000002D8)
>> +#define MMSS_DP_VSCEXT_3(0x000002DC)
>> +#define MMSS_DP_VSCEXT_4(0x000002E0)
>> +#define MMSS_DP_VSCEXT_5(0x000002E4)
>> +#define MMSS_DP_VSCEXT_6(0x000002E8)
>> +#define MMSS_DP_VSCEXT_7(0x000002EC)
>> +#define MMSS_DP_VSCEXT_8(0x000002F0)
>> +#define MMSS_DP_VSCEXT_9(0x000002F4)
>> +
>> +#define MMSS_DP_BIST_ENABLE(0x00000000)
>> +#define DP_BIST_ENABLE_DPBIST_EN(0x00000001)
>> +
>> +#define MMSS_DP_TIMING_ENGINE_EN(0x00000010)
>> +#define DP_TIMING_ENGINE_EN_EN(0x00000001)
>> +
>> +#define MMSS_DP_INTF_CONFIG(0x00000014)
>> +#define MMSS_DP_INTF_HSYNC_CTL(0x00000018)
>> +#define MMSS_DP_INTF_VSYNC_PERIOD_F0(0x0000001C)
>> +#define MMSS_DP_INTF_VSYNC_PERIOD_F1(0x00000020)
>> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0(0x00000024)
>> +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1(0x00000028)
>> +#define MMSS_INTF_DISPLAY_V_START_F0(0x0000002C)
>> +#define MMSS_INTF_DISPLAY_V_START_F1(0x00000030)
>> +#define MMSS_DP_INTF_DISPLAY_V_END_F0(0x00000034)
>> +#define MMSS_DP_INTF_DISPLAY_V_END_F1(0x00000038)
>> +#define MMSS_DP_INTF_ACTIVE_V_START_F0(0x0000003C)
>> +#define MMSS_DP_INTF_ACTIVE_V_START_F1(0x00000040)
>> +#define MMSS_DP_INTF_ACTIVE_V_END_F0(0x00000044)
>> +#define MMSS_DP_INTF_ACTIVE_V_END_F1(0x00000048)
>> +#define MMSS_DP_INTF_DISPLAY_HCTL(0x0000004C)
>> +#define MMSS_DP_INTF_ACTIVE_HCTL(0x00000050)
>> +#define MMSS_DP_INTF_POLARITY_CTL(0x00000058)
>> +
>> +#define MMSS_DP_TPG_MAIN_CONTROL(0x00000060)
>> +#define DP_TPG_CHECKERED_RECT_PATTERN(0x00000100)
>> +
>> +#define MMSS_DP_TPG_VIDEO_CONFIG(0x00000064)
>> +#define DP_TPG_VIDEO_CONFIG_BPP_8BIT(0x00000001)
>> +#define DP_TPG_VIDEO_CONFIG_RGB(0x00000004)
>> +
>> +#define MMSS_DP_ASYNC_FIFO_CONFIG(0x00000088)
>> +
>> +/*DP PHY Register offsets */
>> +#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
>> +#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
>> +#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
>> +#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
>> +
>> +#define REG_DP_PHY_CFG                          (0x00000010)
>> +
>> +#define REG_DP_PHY_PD_CTL                       (0x00000018)
>> +#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
>> +#define DP_PHY_PD_CTL_PSR_PWRDN(0x00000002)
>> +#define DP_PHY_PD_CTL_AUX_PWRDN(0x00000004)
>> +#define DP_PHY_PD_CTL_LANE_0_1_PWRDN(0x00000008)
>> +#define DP_PHY_PD_CTL_LANE_2_3_PWRDN(0x00000010)
>> +#define DP_PHY_PD_CTL_PLL_PWRDN(0x00000020)
>> +#define DP_PHY_PD_CTL_DP_CLAMP_EN(0x00000040)
>> +
>> +#define REG_DP_PHY_MODE                         (0x0000001C)
>> +
>> +#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
>> +#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
>> +#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
>> +#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
>> +#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
>> +#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
>> +#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
>> +#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
>> +#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
>> +#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
>> +
>> +#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
>> +#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
>> +#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
>> +#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
>> +#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
>> +#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
>> +
>> +
>> +#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
>> +#define REG_DP_PHY_AUX_BIST_CFG(0x00000050)
>> +
>> +#define REG_DP_PHY_VCO_DIV0x0064
>> +#define REG_DP_PHY_TX0_TX1_LANE_CTL0x006C
>> +#define REG_DP_PHY_TX2_TX3_LANE_CTL0x0088
>> +
>> +#define REG_DP_PHY_SPARE0(0x00AC)
>> +#define DP_PHY_SPARE0_MASK(0x000F)
>> +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT(0x0004);
>> +
>> +#define REG_DP_PHY_STATUS(0x00C0)
>> +
>> +/* Tx registers */
>> +#define REG_DP_PHY_TXn_BIST_MODE_LANENO0x0000
>> +#define REG_DP_PHY_TXn_CLKBUF_ENABLE0x0008
>> +
>> +#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL0x000C
>> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK0x001F
>> +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN0x0020
>> +
>> +#define REG_DP_PHY_TXn_TX_DRV_LVL0x001C
>> +#define DP_PHY_TXn_TX_DRV_LVL_MASK0x001F
>> +#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN0x0020
>> +
>> +#define REG_DP_PHY_TXn_RESET_TSYNC_EN0x0024
>> +#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN0x0028
>> +#define REG_DP_PHY_TXn_TX_BAND0x002C
>> +#define REG_DP_PHY_TXn_SLEW_CNTL0x0030
>> +#define REG_DP_PHY_TXn_INTERFACE_SELECT0x0034
>> +
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_TX0x003C
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_RX0x0040
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX0x0044
>> +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX0x0048
>> +
>> +#define REG_DP_PHY_TXn_DEBUG_BUS_SEL0x0058
>> +#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN0x005C
>> +#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN0x0060
>> +#define REG_DP_PHY_TXn_TX_POL_INV0x0064
>> +#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
>> +
>> +#define REG_DP_PHY_TXn_LANE_MODE_10x008C
>> +
>> +#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN0x00C0
>> +#define REG_DP_PHY_TXn_TX_INTERFACE_MODE0x00C4
>> +
>> +#define REG_DP_PHY_TXn_VMODE_CTRL10x00F0
>> +
>> +/* PLL register offset */
>> +#define QSERDES_COM_ATB_SEL10x0000
>> +#define QSERDES_COM_ATB_SEL20x0004
>> +#define QSERDES_COM_FREQ_UPDATE0x0008
>> +#define QSERDES_COM_BG_TIMER0x000C
>> +#define QSERDES_COM_SSC_EN_CENTER0x0010
>> +#define QSERDES_COM_SSC_ADJ_PER10x0014
>> +#define QSERDES_COM_SSC_ADJ_PER20x0018
>> +#define QSERDES_COM_SSC_PER10x001C
>> +#define QSERDES_COM_SSC_PER20x0020
>> +#define QSERDES_COM_SSC_STEP_SIZE10x0024
>> +#define QSERDES_COM_SSC_STEP_SIZE20x0028
>> +#define QSERDES_COM_POST_DIV0x002C
>> +#define QSERDES_COM_POST_DIV_MUX0x0030
>> +
>> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN0x0034
>> +#define QSERDES_COM_BIAS_EN0x0001
>> +#define QSERDES_COM_BIAS_EN_MUX0x0002
>> +#define QSERDES_COM_CLKBUF_R_EN0x0004
>> +#define QSERDES_COM_CLKBUF_L_EN0x0008
>> +#define QSERDES_COM_EN_SYSCLK_TX_SEL0x0010
>> +#define QSERDES_COM_CLKBUF_RX_DRIVE_L0x0020
>> +#define QSERDES_COM_CLKBUF_RX_DRIVE_R0x0040
>> +
>> +#define QSERDES_COM_CLK_ENABLE10x0038
>> +#define QSERDES_COM_SYS_CLK_CTRL0x003C
>> +#define QSERDES_COM_SYSCLK_BUF_ENABLE0x0040
>> +#define QSERDES_COM_PLL_EN0x0044
>> +#define QSERDES_COM_PLL_IVCO0x0048
>> +#define QSERDES_COM_CMN_IETRIM0x004C
>> +#define QSERDES_COM_CMN_IPTRIM0x0050
>> +
>> +#define QSERDES_COM_CP_CTRL_MODE00x0060
>> +#define QSERDES_COM_CP_CTRL_MODE10x0064
>> +#define QSERDES_COM_PLL_RCTRL_MODE00x0068
>> +#define QSERDES_COM_PLL_RCTRL_MODE10x006C
>> +#define QSERDES_COM_PLL_CCTRL_MODE00x0070
>> +#define QSERDES_COM_PLL_CCTRL_MODE10x0074
>> +#define QSERDES_COM_PLL_CNTRL0x0078
>> +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM0x007C
>> +#define QSERDES_COM_SYSCLK_EN_SEL0x0080
>> +#define QSERDES_COM_CML_SYSCLK_SEL0x0084
>> +#define QSERDES_COM_RESETSM_CNTRL0x0088
>> +#define QSERDES_COM_RESETSM_CNTRL20x008C
>> +#define QSERDES_COM_LOCK_CMP_EN0x0090
>> +#define QSERDES_COM_LOCK_CMP_CFG0x0094
>> +#define QSERDES_COM_LOCK_CMP1_MODE00x0098
>> +#define QSERDES_COM_LOCK_CMP2_MODE00x009C
>> +#define QSERDES_COM_LOCK_CMP3_MODE00x00A0
>> +
>> +#define QSERDES_COM_DEC_START_MODE00x00B0
>> +#define QSERDES_COM_DEC_START_MODE10x00B4
>> +#define QSERDES_COM_DIV_FRAC_START1_MODE00x00B8
>> +#define QSERDES_COM_DIV_FRAC_START2_MODE00x00BC
>> +#define QSERDES_COM_DIV_FRAC_START3_MODE00x00C0
>> +#define QSERDES_COM_DIV_FRAC_START1_MODE10x00C4
>> +#define QSERDES_COM_DIV_FRAC_START2_MODE10x00C8
>> +#define QSERDES_COM_DIV_FRAC_START3_MODE10x00CC
>> +#define QSERDES_COM_INTEGLOOP_INITVAL0x00D0
>> +#define QSERDES_COM_INTEGLOOP_EN0x00D4
>> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE00x00D8
>> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE00x00DC
>> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE10x00E0
>> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE10x00E4
>> +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL0x00E8
>> +#define QSERDES_COM_VCO_TUNE_CTRL0x00EC
>> +#define QSERDES_COM_VCO_TUNE_MAP0x00F0
>> +
>> +#define QSERDES_COM_CMN_STATUS0x0124
>> +#define QSERDES_COM_RESET_SM_STATUS0x0128
>> +
>> +#define QSERDES_COM_CLK_SEL0x0138
>> +#define QSERDES_COM_HSCLK_SEL0x013C
>> +
>> +#define QSERDES_COM_CORECLK_DIV_MODE00x0148
>> +
>> +#define QSERDES_COM_SW_RESET0x0150
>> +#define QSERDES_COM_CORE_CLK_EN0x0154
>> +#define QSERDES_COM_C_READY_STATUS0x0158
>> +#define QSERDES_COM_CMN_CONFIG0x015C
>> +
>> +#define QSERDES_COM_SVS_MODE_CLK_SEL0x0164
>> +
>> +/* DP MMSS_CC registers */
>> +#define MMSS_DP_LINK_CMD_RCGR(0x0138)
>> +#define MMSS_DP_LINK_CFG_RCGR(0x013C)
>> +#define MMSS_DP_PIXEL_M(0x0174)
>> +#define MMSS_DP_PIXEL_N(0x0178)
>> +
>> +/* DP HDCP 1.3 registers */
>> +#define DP_HDCP_CTRL                                   (0x0A0)
>> +#define DP_HDCP_STATUS                                 (0x0A4)
>> +#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
>> +#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
>> +#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
>> +#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
>> +#define DP_HDCP_SHA_STATUS                             (0x0C8)
>> +#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
>> +#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
>> +#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
>> +#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
>> +#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
>> +
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
>> +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
>> +
>> +/* USB3 DP COM registers */
>> +#define REG_USB3_DP_COM_RESET_OVRD_CTRL(0x1C)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET(0x01)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX(0x02)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET(0x04)
>> +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX(0x08)
>> +
>> +#define REG_USB3_DP_COM_PHY_MODE_CTRL(0x00)
>> +#define USB3_DP_COM_PHY_MODE_DP(0x02)
>> +
>> +#define REG_USB3_DP_COM_SW_RESET(0x04)
>> +#define USB3_DP_COM_SW_RESET_SET(0x01)
>> +
>> +#define REG_USB3_DP_COM_TYPEC_CTRL(0x10)
>> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL(0x01)
>> +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX(0x02)
>> +
>> +#define REG_USB3_DP_COM_SWI_CTRL(0x0c)
>> +
>> +#define REG_USB3_DP_COM_POWER_DOWN_CTRL(0x08)
>> +#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN(0x01)
>> +
>> +
>> +
>> +#endif /* _DP_REG_H_ */
>> diff --git a/drivers/gpu/drm/msm/msm_drv.c
>> b/drivers/gpu/drm/msm/msm_drv.c
>> index c84f0a8..e5e93e3 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.c
>> +++ b/drivers/gpu/drm/msm/msm_drv.c
>> @@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
>>  msm_dsi_register();
>>  msm_edp_register();
>>  msm_hdmi_register();
>> +msm_dp_register();
>>  adreno_register();
>>  return platform_driver_register(&msm_platform_driver);
>>  }
>> @@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
>>  {
>>  DBG("fini");
>>  platform_driver_unregister(&msm_platform_driver);
>> +msm_dp_unregister();
>>  msm_hdmi_unregister();
>>  adreno_unregister();
>>  msm_edp_unregister();
>> diff --git a/drivers/gpu/drm/msm/msm_drv.h
>> b/drivers/gpu/drm/msm/msm_drv.h
>> index 71547e7..8b068ec 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.h
>> +++ b/drivers/gpu/drm/msm/msm_drv.h
>> @@ -159,6 +159,8 @@ struct msm_drm_private {
>>  /* DSI is shared by mdp4 and mdp5 */
>>  struct msm_dsi *dsi[2];
>> 
>> +struct msm_dp *dp;
>> +
>>  /* when we have more than one 'msm_gpu' these need to be an array: */
>>  struct msm_gpu *gpu;
>>  struct msm_file_private *lastctx;
>> @@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct
>> msm_dsi *msm_dsi,
>>  }
>>  #endif
>> 
>> +#ifdef CONFIG_DRM_MSM_DP
>> +int __init msm_dp_register(void);
>> +void __exit msm_dp_unregister(void);
>> +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
>> *dev,
>> + struct drm_encoder *encoder);
>> +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
>> *encoder);
>> +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
>> *encoder);
>> +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
>> *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode);
>> +
>> +#else
>> +static inline int __init msm_dp_register(void)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline void __exit msm_dp_unregister(void)
>> +{
>> +}
>> +static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
>> +       struct drm_device *dev,
>> +       struct drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline int msm_dp_display_enable(struct msm_dp *dp, struct
>> drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline int msm_dp_display_disable(struct msm_dp *dp, struct
>> drm_encoder *encoder)
>> +{
>> +return -EINVAL;
>> +}
>> +static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct
>> drm_encoder *encoder,
>> +struct drm_display_mode *mode,
>> +struct drm_display_mode *adjusted_mode)
>> +{
>> +}
>> +#endif
>> +
>>  void __init msm_mdp_register(void);
>>  void __exit msm_mdp_unregister(void);
>>  void __init msm_dpu_register(void);
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: FW: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Matthias Kaehlcke]

Hi Vara,

thanks for the clarification!

I saw another series (https://patchwork.kernel.org/project/linux-arm-msm/list/?series=248129)
with an explicit dependency on this version of the patch and was
concerned to not see any review activity or a newer version. It didn't
occur to me that the review might be done on the previous version ;-)
If the folks doing the review are fine with one mega patch who am I to
complain, just thought it might be a reason that deterred potential
reviewers.

Thanks

Matthias

On Mon, Mar 02, 2020 at 03:47:53PM -0800, varar@codeaurora.org wrote:
> 
> Hi Matthias
> 
> The earlier patchsets of the same series were reviewed by Sean so we were
> spending our efforts addressing the comments based on the earlier versions.
> We think the delay in getting reviews and also posting newer versions was
> not specifically due to the size of the code but also due to business
> reasons around that time. This is the basic version of the DP driver where
> all the files are tightly coupled. We understand that this is a big series
> and we have tried to break it up functionality-wise. For example, we are
> going to post hot-plug related changes and some more functionality like
> audio in a later patch. Also, we shall be posting a newer version of this
> series within a day or two which shall address the comments posted so far
> along with the checkpatch fixes and changes needed to make DP work on
> Trogdor. Hence we request that the new version which shall be posted be
> reviewed first and if there is some split-up which can be done further, let
> us know and we shall try to address that in the next patchsets.
> 
> Thanks
> 
> Vara (on behalf of Display team)
> 
> > -------- Original Message --------
> > Subject: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver
> > support
> > Date: 2020-02-28 13:49
> >  From: Matthias Kaehlcke <mka@chromium.org>
> > To: Chandan Uddaraju <chandanu@codeaurora.org>
> > Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
> > abhinavk@codeaurora.org, seanpaul@chromium.org,
> > dri-devel@lists.freedesktop.org, hoegsberg@google.com,
> > freedreno@lists.freedesktop.org
> > 
> > Hi Chandan,
> > 
> > I have no DRM background, but I suspect one reason this patch hasn't
> > been reviewed in almost 3 months is its size, 8k LOC. I would suggest to
> > split it up into multiple pieces to make a review less daunting. Not
> > sure
> > what the exact split would be, evaluating it per source file/self
> > contained function could be a starting point.
> > 
> > And please make sure to run scripts/checkpatch.pl before sending patches
> > (especially larger ones), reviewers don't like to spend time pointing
> > out
> > formatting issues that should have been fixed beforehand:
> > 
> > ./scripts/checkpatch.pl
> > DPU-v3-3-5-drm-msm-dp-add-displayPort-driver-support.patch
> > 
> > ...
> > 
> > total: 2 errors, 141 warnings, 8440 lines checked
> > 
> > Thanks
> > 
> > Matthias
> > 
> > On Mon, Dec 02, 2019 at 01:48:57PM +0000, Chandan Uddaraju wrote:
> > > Add the needed displayPort files to enable DP driver
> > > on msm target.
> > > 
> > > "dp_display" module is the main module that calls into
> > > other sub-modules. "dp_drm" file represents the interface
> > > between DRM framework and DP driver.
> > > 
> > > changes in v2:
> > > -- Update copyright markings on all relevant files.
> > > -- Change pr_err() to DRM_ERROR()
> > > -- Use APIs directly instead of function pointers.
> > > -- Use drm_display_mode structure to store link parameters in the
> > > driver.
> > > -- Use macros for register definitions instead of hardcoded values.
> > > -- Replace writel_relaxed/readl_relaxed with writel/readl
> > >    and remove memory barriers.
> > > -- Remove unnecessary NULL checks.
> > > -- Use drm helper functions for dpcd read/write.
> > > -- Use DRM_DEBUG_DP for debug msgs.
> > > 
> > > changes in V3:
> > > -- Removed changes in dpu_io_util.[ch]
> > > -- Added locking around "is_connected" flag and removed atomic_set()
> > > -- Removed the argument validation checks in all the static functions
> > >    except initialization functions and few API calls across msm/dp
> > > files
> > > -- Removed hardcoded values for register reads/writes
> > > -- Removed vreg related generic structures.
> > > -- Added return values where ever necessary.
> > > -- Updated dp_ctrl_on function.
> > > -- Calling the ctrl specific catalog functions directly instead of
> > >    function pointers.
> > > -- Added seperate change that adds standard value in drm_dp_helper
> > > file.
> > > -- Added separate change in this list that is used to initialize
> > >    displayport in DPU driver.
> > > -- Added change to use drm_dp_get_adjust_request_voltage() function.
> > > 
> > > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> > > ---
> > >  drivers/gpu/drm/msm/Kconfig                 |    9 +
> > >  drivers/gpu/drm/msm/Makefile                |   13 +
> > >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |   20 +
> > >  drivers/gpu/drm/msm/dp/dp_aux.c             |  548 +++++++++
> > >  drivers/gpu/drm/msm/dp/dp_aux.h             |   37 +
> > >  drivers/gpu/drm/msm/dp/dp_catalog.c         |  841 ++++++++++++++
> > >  drivers/gpu/drm/msm/dp/dp_catalog.h         |   84 ++
> > >  drivers/gpu/drm/msm/dp/dp_ctrl.c            | 1590
> > > +++++++++++++++++++++++++++
> > >  drivers/gpu/drm/msm/dp/dp_ctrl.h            |   34 +
> > >  drivers/gpu/drm/msm/dp/dp_display.c         |  949 ++++++++++++++++
> > >  drivers/gpu/drm/msm/dp/dp_display.h         |   29 +
> > >  drivers/gpu/drm/msm/dp/dp_drm.c             |  173 +++
> > >  drivers/gpu/drm/msm/dp/dp_drm.h             |   20 +
> > >  drivers/gpu/drm/msm/dp/dp_extcon.c          |  216 ++++
> > >  drivers/gpu/drm/msm/dp/dp_extcon.h          |   84 ++
> > >  drivers/gpu/drm/msm/dp/dp_link.c            | 1185
> > > ++++++++++++++++++++
> > >  drivers/gpu/drm/msm/dp/dp_link.h            |  132 +++
> > >  drivers/gpu/drm/msm/dp/dp_panel.c           |  450 ++++++++
> > >  drivers/gpu/drm/msm/dp/dp_panel.h           |   92 ++
> > >  drivers/gpu/drm/msm/dp/dp_parser.c          |  496 +++++++++
> > >  drivers/gpu/drm/msm/dp/dp_parser.h          |  222 ++++
> > >  drivers/gpu/drm/msm/dp/dp_power.c           |  558 ++++++++++
> > >  drivers/gpu/drm/msm/dp/dp_power.h           |   52 +
> > >  drivers/gpu/drm/msm/dp/dp_reg.h             |  488 ++++++++
> > >  drivers/gpu/drm/msm/msm_drv.c               |    2 +
> > >  drivers/gpu/drm/msm/msm_drv.h               |   42 +
> > >  26 files changed, 8366 insertions(+)
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_aux.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_catalog.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_ctrl.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_display.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_drm.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_extcon.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_link.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_panel.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_parser.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.c
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_power.h
> > >  create mode 100644 drivers/gpu/drm/msm/dp/dp_reg.h
> > > 
> > > diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> > > index 6deaa7d..7946cb1 100644
> > > --- a/drivers/gpu/drm/msm/Kconfig
> > > +++ b/drivers/gpu/drm/msm/Kconfig
> > > @@ -57,6 +57,15 @@ config DRM_MSM_HDMI_HDCP
> > >  help
> > >    Choose this option to enable HDCP state machine
> > > 
> > > +config DRM_MSM_DP
> > > +bool "Enable DP support in MSM DRM driver"
> > > +depends on DRM_MSM
> > > +default n
> > > +help
> > > +  Compile in support for DP driver in msm drm driver. DP external
> > > +  display support is enabled through this config option. It can
> > > +  be primary or secondary display on device.
> > > +
> > >  config DRM_MSM_DSI
> > >  bool "Enable DSI support in MSM DRM driver"
> > >  depends on DRM_MSM
> > > diff --git a/drivers/gpu/drm/msm/Makefile
> > > b/drivers/gpu/drm/msm/Makefile
> > > index 1579cf0..5939f41 100644
> > > --- a/drivers/gpu/drm/msm/Makefile
> > > +++ b/drivers/gpu/drm/msm/Makefile
> > > @@ -2,6 +2,7 @@
> > >  ccflags-y := -I $(srctree)/$(src)
> > >  ccflags-y += -I $(srctree)/$(src)/disp/dpu1
> > >  ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
> > > +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp
> > > 
> > >  msm-y := \
> > >  adreno/adreno_device.o \
> > > @@ -96,8 +97,20 @@ msm-y := \
> > > 
> > >  msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
> > > 
> > > +
> > >  msm-$(CONFIG_DRM_MSM_GPU_STATE)+= adreno/a6xx_gpu_state.o
> > > 
> > > +msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
> > > +dp/dp_catalog.o \
> > > +dp/dp_ctrl.o \
> > > +dp/dp_display.o \
> > > +dp/dp_drm.o \
> > > +dp/dp_extcon.o \
> > > +dp/dp_link.o \
> > > +dp/dp_panel.o \
> > > +dp/dp_parser.o \
> > > +dp/dp_power.o
> > > +
> > >  msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
> > >  msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
> > >  msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > index f96e142..29ac7d3 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct
> > > drm_encoder *drm_enc,
> > > 
> > >  trace_dpu_enc_mode_set(DRMID(drm_enc));
> > > 
> > > +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
> > > +msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
> > > +
> > >  list_for_each_entry(conn_iter, connector_list, head)
> > >  if (conn_iter->encoder == drm_enc)
> > >  conn = conn_iter;
> > > @@ -1133,6 +1136,7 @@ static void dpu_encoder_virt_enable(struct
> > > drm_encoder *drm_enc)
> > >  {
> > >  struct dpu_encoder_virt *dpu_enc = NULL;
> > >  int ret = 0;
> > > +struct msm_drm_private *priv;
> > >  struct drm_display_mode *cur_mode = NULL;
> > > 
> > >  if (!drm_enc) {
> > > @@ -1143,6 +1147,7 @@ static void dpu_encoder_virt_enable(struct
> > > drm_encoder *drm_enc)
> > > 
> > >  mutex_lock(&dpu_enc->enc_lock);
> > >  cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
> > > +priv = drm_enc->dev->dev_private;
> > > 
> > >  trace_dpu_enc_enable(DRMID(drm_enc), cur_mode->hdisplay,
> > >       cur_mode->vdisplay);
> > > @@ -1163,6 +1168,15 @@ static void dpu_encoder_virt_enable(struct
> > > drm_encoder *drm_enc)
> > > 
> > >  _dpu_encoder_virt_enable_helper(drm_enc);
> > > 
> > > +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> > > +ret = msm_dp_display_enable(priv->dp,
> > > +drm_enc);
> > > +if (ret) {
> > > +DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
> > > +ret);
> > > +goto out;
> > > +}
> > > +}
> > >  dpu_enc->enabled = true;
> > > 
> > >  out:
> > > @@ -1193,6 +1207,12 @@ static void dpu_encoder_virt_disable(struct
> > > drm_encoder *drm_enc)
> > >  priv = drm_enc->dev->dev_private;
> > >  dpu_kms = to_dpu_kms(priv->kms);
> > > 
> > > +if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp) {
> > > +if (msm_dp_display_disable(priv->dp, drm_enc)) {
> > > +DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
> > > +return;
> > > +  }
> > > +}
> > >  trace_dpu_enc_disable(DRMID(drm_enc));
> > > 
> > >  /* wait for idle */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
> > > b/drivers/gpu/drm/msm/dp/dp_aux.c
> > > new file mode 100644
> > > index 0000000..a6bb52a
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> > > @@ -0,0 +1,548 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/delay.h>
> > > +
> > > +#include "dp_reg.h"
> > > +#include "dp_aux.h"
> > > +
> > > +#define DP_AUX_ENUM_STR(x)#x
> > > +
> > > +struct dp_aux_private {
> > > +struct device *dev;
> > > +struct dp_aux dp_aux;
> > > +struct dp_catalog *catalog;
> > > +
> > > +struct mutex mutex;
> > > +struct completion comp;
> > > +
> > > +u32 aux_error_num;
> > > +u32 retry_cnt;
> > > +bool cmd_busy;
> > > +bool native;
> > > +bool read;
> > > +bool no_send_addr;
> > > +bool no_send_stop;
> > > +u32 offset;
> > > +u32 segment;
> > > +u32 isr;
> > > +
> > > +struct drm_dp_aux drm_aux;
> > > +};
> > > +
> > > +static char *dp_aux_get_error(u32 aux_error)
> > > +{
> > > +switch (aux_error) {
> > > +case DP_AUX_ERR_NONE:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_NONE);
> > > +case DP_AUX_ERR_ADDR:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_ADDR);
> > > +case DP_AUX_ERR_TOUT:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_TOUT);
> > > +case DP_AUX_ERR_NACK:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK);
> > > +case DP_AUX_ERR_DEFER:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_DEFER);
> > > +case DP_AUX_ERR_NACK_DEFER:
> > > +return DP_AUX_ENUM_STR(DP_AUX_ERR_NACK_DEFER);
> > > +default:
> > > +return "unknown";
> > > +}
> > > +}
> > > +
> > > +static u32 dp_aux_write(struct dp_aux_private *aux,
> > > +struct drm_dp_aux_msg *msg)
> > > +{
> > > +u32 data[4], reg, len;
> > > +u8 *msgdata = msg->buffer;
> > > +int const aux_cmd_fifo_len = 128;
> > > +int i = 0;
> > > +
> > > +if (aux->read)
> > > +len = 4;
> > > +else
> > > +len = msg->size + 4;
> > > +
> > > +/*
> > > + * cmd fifo only has depth of 144 bytes
> > > + * limit buf length to 128 bytes here
> > > + */
> > > +if (len > aux_cmd_fifo_len) {
> > > +DRM_ERROR("buf len error\n");
> > > +return 0;
> > > +}
> > > +
> > > +/* Pack cmd and write to HW */
> > > +data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
> > > +if (aux->read)
> > > +data[0] |=  BIT(4); /* R/W */
> > > +
> > > +data[1] = (msg->address >> 8) & 0xff;/* addr[15:8] */
> > > +data[2] = msg->address & 0xff;/* addr[7:0] */
> > > +data[3] = (msg->size - 1) & 0xff;/* len[7:0] */
> > > +
> > > +for (i = 0; i < len; i++) {
> > > +reg = (i < 4) ? data[i] : msgdata[i - 4];
> > > +/* index = 0, write */
> > > +reg = (((reg) << DP_AUX_DATA_OFFSET)
> > > +       & DP_AUX_DATA_MASK) | DP_AUX_DATA_WRITE;
> > > +if (i == 0)
> > > +reg |= DP_AUX_DATA_INDEX_WRITE;
> > > +aux->catalog->aux_data = reg;
> > > +dp_catalog_aux_write_data(aux->catalog);
> > > +}
> > > +
> > > +dp_catalog_aux_clear_trans(aux->catalog, false);
> > > +
> > > +reg = 0; /* Transaction number == 1 */
> > > +if (!aux->native) { /* i2c */
> > > +reg |= DP_AUX_TRANS_CTRL_I2C;
> > > +
> > > +if (aux->no_send_addr)
> > > +reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
> > > +
> > > +if (aux->no_send_stop)
> > > +reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
> > > +}
> > > +
> > > +reg |= DP_AUX_TRANS_CTRL_GO;
> > > +aux->catalog->aux_data = reg;
> > > +dp_catalog_aux_write_trans(aux->catalog);
> > > +
> > > +return len;
> > > +}
> > > +
> > > +static int dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> > > +      struct drm_dp_aux_msg *msg)
> > > +{
> > > +u32 ret = 0, len = 0, timeout;
> > > +int const aux_timeout_ms = HZ/4;
> > > +
> > > +reinit_completion(&aux->comp);
> > > +
> > > +len = dp_aux_write(aux, msg);
> > > +if (len == 0) {
> > > +DRM_ERROR("DP AUX write failed\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +timeout = wait_for_completion_timeout(&aux->comp, aux_timeout_ms);
> > > +if (!timeout) {
> > > +DRM_ERROR("aux %s timeout\n", (aux->read ? "read" : "write"));
> > > +return -ETIMEDOUT;
> > > +}
> > > +
> > > +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> > > +ret = len;
> > > +} else {
> > > +DRM_ERROR_RATELIMITED("aux err: %s\n",
> > > +dp_aux_get_error(aux->aux_error_num));
> > > +
> > > +ret = -EINVAL;
> > > +}
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static void dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
> > > +struct drm_dp_aux_msg *msg)
> > > +{
> > > +u32 data;
> > > +u8 *dp;
> > > +u32 i, actual_i;
> > > +u32 len = msg->size;
> > > +
> > > +dp_catalog_aux_clear_trans(aux->catalog, true);
> > > +
> > > +data = 0;
> > > +data |= DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
> > > +data |= DP_AUX_DATA_READ;  /* read */
> > > +
> > > +aux->catalog->aux_data = data;
> > > +dp_catalog_aux_write_data(aux->catalog);
> > > +
> > > +dp = msg->buffer;
> > > +
> > > +/* discard first byte */
> > > +data = dp_catalog_aux_read_data(aux->catalog);
> > > +
> > > +for (i = 0; i < len; i++) {
> > > +data = dp_catalog_aux_read_data(aux->catalog);
> > > +*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
> > > +
> > > +actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
> > > +if (i != actual_i)
> > > +pr_warn("Index mismatch: expected %d, found %d\n",
> > > +i, actual_i);
> > > +}
> > > +}
> > > +
> > > +static void dp_aux_native_handler(struct dp_aux_private *aux)
> > > +{
> > > +u32 isr = aux->isr;
> > > +
> > > +if (isr & DP_INTR_AUX_I2C_DONE)
> > > +aux->aux_error_num = DP_AUX_ERR_NONE;
> > > +else if (isr & DP_INTR_WRONG_ADDR)
> > > +aux->aux_error_num = DP_AUX_ERR_ADDR;
> > > +else if (isr & DP_INTR_TIMEOUT)
> > > +aux->aux_error_num = DP_AUX_ERR_TOUT;
> > > +if (isr & DP_INTR_NACK_DEFER)
> > > +aux->aux_error_num = DP_AUX_ERR_NACK;
> > > +
> > > +complete(&aux->comp);
> > > +}
> > > +
> > > +static void dp_aux_i2c_handler(struct dp_aux_private *aux)
> > > +{
> > > +u32 isr = aux->isr;
> > > +
> > > +if (isr & DP_INTR_AUX_I2C_DONE) {
> > > +if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
> > > +aux->aux_error_num = DP_AUX_ERR_NACK;
> > > +else
> > > +aux->aux_error_num = DP_AUX_ERR_NONE;
> > > +} else {
> > > +if (isr & DP_INTR_WRONG_ADDR)
> > > +aux->aux_error_num = DP_AUX_ERR_ADDR;
> > > +else if (isr & DP_INTR_TIMEOUT)
> > > +aux->aux_error_num = DP_AUX_ERR_TOUT;
> > > +if (isr & DP_INTR_NACK_DEFER)
> > > +aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
> > > +if (isr & DP_INTR_I2C_NACK)
> > > +aux->aux_error_num = DP_AUX_ERR_NACK;
> > > +if (isr & DP_INTR_I2C_DEFER)
> > > +aux->aux_error_num = DP_AUX_ERR_DEFER;
> > > +}
> > > +
> > > +complete(&aux->comp);
> > > +}
> > > +
> > > +static void dp_aux_update_offset_and_segment(struct dp_aux_private
> > > *aux,
> > > +     struct drm_dp_aux_msg *input_msg)
> > > +{
> > > +u32 const edid_address = 0x50;
> > > +u32 const segment_address = 0x30;
> > > +bool i2c_read = input_msg->request &
> > > +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> > > +u8 *data = NULL;
> > > +
> > > +if (aux->native || i2c_read || ((input_msg->address != edid_address)
> > > &&
> > > +(input_msg->address != segment_address)))
> > > +return;
> > > +
> > > +
> > > +data = input_msg->buffer;
> > > +if (input_msg->address == segment_address)
> > > +aux->segment = *data;
> > > +else
> > > +aux->offset = *data;
> > > +}
> > > +
> > > +/**
> > > + * dp_aux_transfer_helper() - helper function for EDID read
> > > transactions
> > > + *
> > > + * @aux: DP AUX private structure
> > > + * @input_msg: input message from DRM upstream APIs
> > > + *
> > > + * return: void
> > > + *
> > > + * This helper function is used to fix EDID reads for non-compliant
> > > + * sinks that do not handle the i2c middle-of-transaction flag
> > > correctly.
> > > + */
> > > +static void dp_aux_transfer_helper(struct dp_aux_private *aux,
> > > +   struct drm_dp_aux_msg *input_msg)
> > > +{
> > > +struct drm_dp_aux_msg helper_msg;
> > > +u32 const message_size = 0x10;
> > > +u32 const segment_address = 0x30;
> > > +bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
> > > +bool i2c_read = input_msg->request &
> > > +(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> > > +
> > > +if (!i2c_mot || !i2c_read || (input_msg->size == 0))
> > > +return;
> > > +
> > > +aux->read = false;
> > > +aux->cmd_busy = true;
> > > +aux->no_send_addr = true;
> > > +aux->no_send_stop = true;
> > > +
> > > +/*
> > > + * Send the segment address for every i2c read in which the
> > > + * middle-of-tranaction flag is set. This is required to support EDID
> > > + * reads of more than 2 blocks as the segment address is reset to 0
> > > + * since we are overriding the middle-of-transaction flag for read
> > > + * transactions.
> > > + */
> > > +memset(&helper_msg, 0, sizeof(helper_msg));
> > > +helper_msg.address = segment_address;
> > > +helper_msg.buffer = &aux->segment;
> > > +helper_msg.size = 1;
> > > +dp_aux_cmd_fifo_tx(aux, &helper_msg);
> > > +
> > > +/*
> > > + * Send the offset address for every i2c read in which the
> > > + * middle-of-transaction flag is set. This will ensure that the sink
> > > + * will update its read pointer and return the correct portion of the
> > > + * EDID buffer in the subsequent i2c read trasntion triggered in the
> > > + * native AUX transfer function.
> > > + */
> > > +memset(&helper_msg, 0, sizeof(helper_msg));
> > > +helper_msg.address = input_msg->address;
> > > +helper_msg.buffer = &aux->offset;
> > > +helper_msg.size = 1;
> > > +dp_aux_cmd_fifo_tx(aux, &helper_msg);
> > > +aux->offset += message_size;
> > > +
> > > +if (aux->offset == 0x80 || aux->offset == 0x100)
> > > +aux->segment = 0x0; /* reset segment at end of block */
> > > +}
> > > +
> > > +/*
> > > + * This function does the real job to process an AUX transaction.
> > > + * It will call aux_reset() function to reset the AUX channel,
> > > + * if the waiting is timeout.
> > > + */
> > > +static ssize_t dp_aux_transfer(struct drm_dp_aux *drm_aux,
> > > +       struct drm_dp_aux_msg *msg)
> > > +{
> > > +ssize_t ret;
> > > +int const aux_cmd_native_max = 16;
> > > +int const aux_cmd_i2c_max = 128;
> > > +int const retry_count = 5;
> > > +struct dp_aux_private *aux = container_of(drm_aux,
> > > +struct dp_aux_private, drm_aux);
> > > +
> > > +mutex_lock(&aux->mutex);
> > > +
> > > +aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
> > > DP_AUX_NATIVE_READ);
> > > +
> > > +/* Ignore address only message */
> > > +if ((msg->size == 0) || (msg->buffer == NULL)) {
> > > +msg->reply = aux->native ?
> > > +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> > > +ret = msg->size;
> > > +goto unlock_exit;
> > > +}
> > > +
> > > +/* msg sanity check */
> > > +if ((aux->native && (msg->size > aux_cmd_native_max)) ||
> > > +(msg->size > aux_cmd_i2c_max)) {
> > > +DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> > > +__func__, msg->size, msg->request);
> > > +ret = -EINVAL;
> > > +goto unlock_exit;
> > > +}
> > > +
> > > +dp_aux_update_offset_and_segment(aux, msg);
> > > +dp_aux_transfer_helper(aux, msg);
> > > +
> > > +aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> > > +aux->cmd_busy = true;
> > > +
> > > +if (aux->read) {
> > > +aux->no_send_addr = true;
> > > +aux->no_send_stop = false;
> > > +} else {
> > > +aux->no_send_addr = true;
> > > +aux->no_send_stop = true;
> > > +}
> > > +
> > > +ret = dp_aux_cmd_fifo_tx(aux, msg);
> > > +if ((ret < 0) && aux->native) {
> > > +aux->retry_cnt++;
> > > +if (!(aux->retry_cnt % retry_count))
> > > +dp_catalog_aux_update_cfg(aux->catalog,
> > > +aux->dp_aux.cfg, PHY_AUX_CFG1);
> > > +dp_catalog_aux_reset(aux->catalog);
> > > +goto unlock_exit;
> > > +} else if (ret < 0) {
> > > +goto unlock_exit;
> > > +}
> > > +
> > > +if (aux->aux_error_num == DP_AUX_ERR_NONE) {
> > > +if (aux->read)
> > > +dp_aux_cmd_fifo_rx(aux, msg);
> > > +
> > > +msg->reply = aux->native ?
> > > +DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> > > +} else {
> > > +/* Reply defer to retry */
> > > +msg->reply = aux->native ?
> > > +DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
> > > +}
> > > +
> > > +/* Return requested size for success or retry */
> > > +ret = msg->size;
> > > +aux->retry_cnt = 0;
> > > +
> > > +unlock_exit:
> > > +aux->cmd_busy = false;
> > > +mutex_unlock(&aux->mutex);
> > > +return ret;
> > > +}
> > > +
> > > +static void dp_aux_reset_phy_config_indices(struct dp_aux_cfg
> > > *aux_cfg)
> > > +{
> > > +int i = 0;
> > > +
> > > +for (i = 0; i < PHY_AUX_CFG_MAX; i++)
> > > +aux_cfg[i].current_index = 0;
> > > +}
> > > +
> > > +void dp_aux_isr(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +if (!dp_aux) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +aux->isr = dp_catalog_aux_get_irq(aux->catalog);
> > > +
> > > +if (!aux->cmd_busy)
> > > +return;
> > > +
> > > +if (aux->native)
> > > +dp_aux_native_handler(aux);
> > > +else
> > > +dp_aux_i2c_handler(aux);
> > > +}
> > > +
> > > +void dp_aux_reconfig(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +dp_catalog_aux_update_cfg(aux->catalog,
> > > +dp_aux->cfg, PHY_AUX_CFG1);
> > > +dp_catalog_aux_reset(aux->catalog);
> > > +}
> > > +
> > > +void dp_aux_init(struct dp_aux *dp_aux, struct dp_aux_cfg *aux_cfg)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +if (!dp_aux || !aux_cfg) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +dp_aux_reset_phy_config_indices(aux_cfg);
> > > +dp_catalog_aux_setup(aux->catalog, aux_cfg);
> > > +dp_catalog_aux_reset(aux->catalog);
> > > +dp_catalog_aux_enable(aux->catalog, true);
> > > +aux->retry_cnt = 0;
> > > +}
> > > +
> > > +void dp_aux_deinit(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +if (!dp_aux) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +dp_catalog_aux_enable(aux->catalog, false);
> > > +}
> > > +
> > > +int dp_aux_register(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +int ret = 0;
> > > +
> > > +if (!dp_aux) {
> > > +DRM_ERROR("invalid input\n");
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +aux->drm_aux.name = "dpu_dp_aux";
> > > +aux->drm_aux.dev = aux->dev;
> > > +aux->drm_aux.transfer = dp_aux_transfer;
> > > +ret = drm_dp_aux_register(&aux->drm_aux);
> > > +if (ret) {
> > > +DRM_ERROR("%s: failed to register drm aux: %d\n", __func__, ret);
> > > +goto exit;
> > > +}
> > > +dp_aux->drm_aux = &aux->drm_aux;
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +void dp_aux_unregister(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +if (!dp_aux) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +drm_dp_aux_unregister(&aux->drm_aux);
> > > +}
> > > +
> > > +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
> > > *catalog,
> > > +  struct dp_aux_cfg *aux_cfg)
> > > +{
> > > +int rc = 0;
> > > +struct dp_aux_private *aux;
> > > +struct dp_aux *dp_aux;
> > > +
> > > +if (!catalog || !aux_cfg) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -ENODEV;
> > > +goto error;
> > > +}
> > > +
> > > +aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
> > > +if (!aux) {
> > > +rc = -ENOMEM;
> > > +goto error;
> > > +}
> > > +
> > > +init_completion(&aux->comp);
> > > +aux->cmd_busy = false;
> > > +mutex_init(&aux->mutex);
> > > +
> > > +aux->dev = dev;
> > > +aux->catalog = catalog;
> > > +aux->dp_aux.cfg = aux_cfg;
> > > +dp_aux = &aux->dp_aux;
> > > +aux->retry_cnt = 0;
> > > +
> > > +return dp_aux;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_aux_put(struct dp_aux *dp_aux)
> > > +{
> > > +struct dp_aux_private *aux;
> > > +
> > > +if (!dp_aux)
> > > +return;
> > > +
> > > +aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> > > +
> > > +mutex_destroy(&aux->mutex);
> > > +
> > > +devm_kfree(aux->dev, aux);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h
> > > b/drivers/gpu/drm/msm/dp/dp_aux.h
> > > new file mode 100644
> > > index 0000000..8ce2221
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
> > > @@ -0,0 +1,37 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_AUX_H_
> > > +#define _DP_AUX_H_
> > > +
> > > +#include "dp_catalog.h"
> > > +#include <drm/drm_dp_helper.h>
> > > +
> > > +enum dp_aux_error {
> > > +DP_AUX_ERR_NONE= 0,
> > > +DP_AUX_ERR_ADDR= -1,
> > > +DP_AUX_ERR_TOUT= -2,
> > > +DP_AUX_ERR_NACK= -3,
> > > +DP_AUX_ERR_DEFER= -4,
> > > +DP_AUX_ERR_NACK_DEFER= -5,
> > > +};
> > > +
> > > +struct dp_aux {
> > > +struct drm_dp_aux *drm_aux;
> > > +struct dp_aux_cfg *cfg;
> > > +};
> > > +
> > > +int dp_aux_register(struct dp_aux *aux);
> > > +void dp_aux_unregister(struct dp_aux *aux);
> > > +void dp_aux_isr(struct dp_aux *aux);
> > > +void dp_aux_init(struct dp_aux *aux, struct dp_aux_cfg *aux_cfg);
> > > +void dp_aux_deinit(struct dp_aux *aux);
> > > +void dp_aux_reconfig(struct dp_aux *aux);
> > > +
> > > +struct dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
> > > *catalog,
> > > +  struct dp_aux_cfg *aux_cfg);
> > > +void dp_aux_put(struct dp_aux *aux);
> > > +
> > > +#endif /*__DP_AUX_H_*/
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
> > > b/drivers/gpu/drm/msm/dp/dp_catalog.c
> > > new file mode 100644
> > > index 0000000..51e21bb
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> > > @@ -0,0 +1,841 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/iopoll.h>
> > > +#include <drm/drm_dp_helper.h>
> > > +
> > > +#include "dp_catalog.h"
> > > +#include "dp_reg.h"
> > > +
> > > +#define POLLING_SLEEP_US1000
> > > +#define POLLING_TIMEOUT_US10000
> > > +
> > > +#define REFTIMER_DEFAULT_VALUE0x20000
> > > +#define SCRAMBLER_RESET_COUNT_VALUE0xFC
> > > +
> > > +#define DP_INTERRUPT_STATUS_ACK_SHIFT1
> > > +#define DP_INTERRUPT_STATUS_MASK_SHIFT2
> > > +
> > > +#define DP_INTERRUPT_STATUS1 \
> > > +(DP_INTR_AUX_I2C_DONE| \
> > > +DP_INTR_WRONG_ADDR | DP_INTR_TIMEOUT | \
> > > +DP_INTR_NACK_DEFER | DP_INTR_WRONG_DATA_CNT | \
> > > +DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER | \
> > > +DP_INTR_PLL_UNLOCKED | DP_INTR_AUX_ERROR)
> > > +
> > > +#define DP_INTERRUPT_STATUS1_ACK (DP_INTERRUPT_STATUS1 <<
> > > DP_INTERRUPT_STATUS_ACK_SHIFT)
> > > +#define DP_INTERRUPT_STATUS1_MASK (DP_INTERRUPT_STATUS1 <<
> > > DP_INTERRUPT_STATUS_MASK_SHIFT)
> > > +
> > > +#define DP_INTERRUPT_STATUS2 \
> > > +(DP_INTR_READY_FOR_VIDEO | DP_INTR_IDLE_PATTERN_SENT | \
> > > +DP_INTR_FRAME_END | DP_INTR_CRC_UPDATED)
> > > +
> > > +#define DP_INTERRUPT_STATUS2_ACK (DP_INTERRUPT_STATUS2 <<
> > > DP_INTERRUPT_STATUS_ACK_SHIFT)
> > > +#define DP_INTERRUPT_STATUS2_MASK (DP_INTERRUPT_STATUS2 <<
> > > DP_INTERRUPT_STATUS_MASK_SHIFT)
> > > +
> > > +static u8 const vm_pre_emphasis[4][4] = {
> > > +{0x00, 0x0B, 0x12, 0xFF},       /* pe0, 0 db */
> > > +{0x00, 0x0A, 0x12, 0xFF},       /* pe1, 3.5 db */
> > > +{0x00, 0x0C, 0xFF, 0xFF},       /* pe2, 6.0 db */
> > > +{0xFF, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
> > > +};
> > > +
> > > +/* voltage swing, 0.2v and 1.0v are not support */
> > > +static u8 const vm_voltage_swing[4][4] = {
> > > +{0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v  */
> > > +{0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
> > > +{0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
> > > +{0xFF, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
> > > +};
> > > +
> > > +struct dp_catalog_private {
> > > +struct device *dev;
> > > +struct dp_io *io;
> > > +struct dp_catalog dp_catalog;
> > > +};
> > > +
> > > +static inline u32 dp_read_aux(struct dp_catalog_private *catalog, u32
> > > offset)
> > > +{
> > > +return readl_relaxed(catalog->io->dp_aux.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_aux(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure aux reg writes happens before any other operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->dp_aux.base + offset);
> > > +}
> > > +
> > > +static inline u32 dp_read_ahb(struct dp_catalog_private *catalog, u32
> > > offset)
> > > +{
> > > +return readl_relaxed(catalog->io->dp_ahb.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_ahb(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure phy reg writes happens before any other operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->dp_ahb.base + offset);
> > > +}
> > > +
> > > +static inline u32 dp_read_cc(struct dp_catalog_private *catalog, u32
> > > offset)
> > > +{
> > > +return readl_relaxed(catalog->io->dp_cc_io.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_phy(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure phy reg writes happens before any other operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->phy_io.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_pll(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +writel_relaxed(data, catalog->io->dp_pll_io.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_ln_tx0(struct dp_catalog_private
> > > *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +writel_relaxed(data, catalog->io->ln_tx0_io.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_ln_tx1(struct dp_catalog_private
> > > *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +writel_relaxed(data, catalog->io->ln_tx1_io.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_usb_cm(struct dp_catalog_private
> > > *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure usb reg writes happens before any other operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->usb3_dp_com.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_p0(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure interface reg writes happens before any other
> > > operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->dp_p0.base + offset);
> > > +}
> > > +
> > > +static inline u32 dp_read_link(struct dp_catalog_private *catalog,
> > > u32
> > > offset)
> > > +{
> > > +return readl_relaxed(catalog->io->dp_link.base + offset);
> > > +}
> > > +
> > > +static inline void dp_write_link(struct dp_catalog_private *catalog,
> > > +       u32 offset, u32 data)
> > > +{
> > > +/*
> > > + * To make sure link reg writes happens before any other operation,
> > > + * this function uses writel() instread of writel_relaxed()
> > > + */
> > > +writel(data, catalog->io->dp_link.base + offset);
> > > +}
> > > +
> > > +/* aux related catalog functions */
> > > +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +return dp_read_aux(catalog, REG_DP_AUX_DATA);
> > > +}
> > > +
> > > +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog)
> > > +{
> > > +int rc = 0;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_aux(catalog, REG_DP_AUX_DATA, dp_catalog->aux_data);
> > > +return rc;
> > > +}
> > > +
> > > +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog)
> > > +{
> > > +int rc = 0;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, dp_catalog->aux_data);
> > > +return rc;
> > > +}
> > > +
> > > +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
> > > read)
> > > +{
> > > +int rc = 0;
> > > +u32 data = 0;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +if (read) {
> > > +data = dp_read_aux(catalog, REG_DP_AUX_TRANS_CTRL);
> > > +data &= ~DP_AUX_TRANS_CTRL_GO;
> > > +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, data);
> > > +} else {
> > > +dp_write_aux(catalog, REG_DP_AUX_TRANS_CTRL, 0);
> > > +}
> > > +return rc;
> > > +}
> > > +
> > > +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
> > > +{
> > > +u32 aux_ctrl;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> > > +
> > > +aux_ctrl |= DP_AUX_CTRL_RESET;
> > > +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> > > +usleep_range(1000, 1100); /* h/w recommended delay */
> > > +
> > > +aux_ctrl &= ~DP_AUX_CTRL_RESET;
> > > +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> > > +}
> > > +
> > > +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool
> > > enable)
> > > +{
> > > +u32 aux_ctrl;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +aux_ctrl = dp_read_aux(catalog, REG_DP_AUX_CTRL);
> > > +
> > > +if (enable) {
> > > +dp_write_aux(catalog, REG_DP_TIMEOUT_COUNT, 0xffff);
> > > +dp_write_aux(catalog, REG_DP_AUX_LIMITS, 0xffff);
> > > +aux_ctrl |= DP_AUX_CTRL_ENABLE;
> > > +} else {
> > > +aux_ctrl &= ~DP_AUX_CTRL_ENABLE;
> > > +}
> > > +
> > > +dp_write_aux(catalog, REG_DP_AUX_CTRL, aux_ctrl);
> > > +}
> > > +
> > > +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> > > +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 new_index = 0, current_index = 0;
> > > +
> > > +if (type >= PHY_AUX_CFG_MAX) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +current_index = cfg[type].current_index;
> > > +new_index = (current_index + 1) % cfg[type].cfg_cnt;
> > > +DRM_DEBUG_DP("Updating %s from 0x%08x to 0x%08x\n",
> > > +dp_phy_aux_config_type_to_string(type),
> > > +cfg[type].lut[current_index], cfg[type].lut[new_index]);
> > > +
> > > +dp_write_phy(catalog, cfg[type].offset,
> > > +cfg[type].lut[new_index]);
> > > +cfg[type].current_index = new_index;
> > > +}
> > > +
> > > +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> > > +struct dp_aux_cfg *cfg)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +int i = 0;
> > > +
> > > +dp_write_phy(catalog, REG_DP_PHY_PD_CTL, DP_PHY_PD_CTL_PWRDN |
> > > +DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> > > +DP_PHY_PD_CTL_DP_CLAMP_EN);
> > > +
> > > +/* Turn on BIAS current for PHY/PLL */
> > > +dp_write_pll(catalog,
> > > +QSERDES_COM_BIAS_EN_CLKBUFLR_EN, QSERDES_COM_BIAS_EN |
> > > +QSERDES_COM_BIAS_EN_MUX | QSERDES_COM_CLKBUF_L_EN |
> > > +QSERDES_COM_EN_SYSCLK_TX_SEL);
> > > +
> > > +/* DP AUX CFG register programming */
> > > +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> > > +DRM_DEBUG_DP("%s: offset=0x%08x, value=0x%08x\n",
> > > +dp_phy_aux_config_type_to_string(i),
> > > +cfg[i].offset, cfg[i].lut[cfg[i].current_index]);
> > > +dp_write_phy(catalog, cfg[i].offset,
> > > +cfg[i].lut[cfg[i].current_index]);
> > > +}
> > > +
> > > +dp_write_phy(catalog, REG_DP_PHY_AUX_INTERRUPT_MASK,
> > > PHY_AUX_STOP_ERR_MASK |
> > > +PHY_AUX_DEC_ERR_MASK | PHY_AUX_SYNC_ERR_MASK |
> > > +PHY_AUX_ALIGN_ERR_MASK | PHY_AUX_REQ_ERR_MASK);
> > > +}
> > > +
> > > +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 intr, intr_ack;
> > > +
> > > +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS);
> > > +intr &= ~DP_INTERRUPT_STATUS1_MASK;
> > > +intr_ack = (intr & DP_INTERRUPT_STATUS1) <<
> > > DP_INTERRUPT_STATUS_ACK_SHIFT;
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS, intr_ack |
> > > DP_INTERRUPT_STATUS1_MASK);
> > > +
> > > +return intr;
> > > +
> > > +}
> > > +
> > > +/* controller related catalog functions */
> > > +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
> > > *dp_catalog,
> > > +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_link(catalog, REG_DP_VALID_BOUNDARY, valid_boundary);
> > > +dp_write_link(catalog, REG_DP_TU, dp_tu);
> > > +dp_write_link(catalog, REG_DP_VALID_BOUNDARY_2, valid_boundary2);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
> > > state)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL, state);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
> > > cfg)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +DRM_DEBUG_DP("DP_CONFIGURATION_CTRL=0x%x\n", cfg);
> > > +
> > > +dp_write_link(catalog, REG_DP_CONFIGURATION_CTRL, cfg);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 ln_0 = 0, ln_1 = 1, ln_2 = 2, ln_3 = 3; /* One-to-One mapping */
> > > +u32 ln_mapping;
> > > +
> > > +ln_mapping = ln_0 << LANE0_MAPPING_SHIFT;
> > > +ln_mapping |= ln_1 << LANE1_MAPPING_SHIFT;
> > > +ln_mapping |= ln_2 << LANE2_MAPPING_SHIFT;
> > > +ln_mapping |= ln_3 << LANE3_MAPPING_SHIFT;
> > > +
> > > +dp_write_link(catalog, REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING,
> > > ln_mapping);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
> > > +bool enable)
> > > +{
> > > +u32 mainlink_ctrl;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +if (enable) {
> > > +/*
> > > +* To make sure link reg writes happens before any other operation,
> > > +* dp_write_link() function uses writel() instread of
> > > writel_relaxed()
> > > +*/
> > > +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> > > DP_MAINLINK_FB_BOUNDARY_SEL);
> > > +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> > > +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_RESET);
> > > +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> > > DP_MAINLINK_FB_BOUNDARY_SEL);
> > > +dp_write_link(catalog, REG_DP_MAINLINK_CTRL,
> > > +DP_MAINLINK_FB_BOUNDARY_SEL | DP_MAINLINK_CTRL_ENABLE);
> > > +} else {
> > > +mainlink_ctrl = dp_read_link(catalog, REG_DP_MAINLINK_CTRL);
> > > +mainlink_ctrl &= ~DP_MAINLINK_CTRL_ENABLE;
> > > +dp_write_link(catalog, REG_DP_MAINLINK_CTRL, mainlink_ctrl);
> > > +}
> > > +}
> > > +
> > > +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog,
> > > +u32 colorimetry_cfg, u32 test_bits_depth)
> > > +{
> > > +u32 misc_val;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +misc_val = dp_read_link(catalog, REG_DP_MISC1_MISC0);
> > > +misc_val |= colorimetry_cfg << DP_MISC0_COLORIMETRY_CFG_SHIFT;
> > > +misc_val |= test_bits_depth << DP_MISC0_TEST_BITS_DEPTH_SHIFT;
> > > +/* Configure clock to synchronous mode */
> > > +misc_val |= DP_MISC0_SYNCHRONOUS_CLK;
> > > +
> > > +DRM_DEBUG_DP("misc settings = 0x%x\n", misc_val);
> > > +dp_write_link(catalog, REG_DP_MISC1_MISC0, misc_val);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
> > > +u32 rate, u32 stream_rate_khz,
> > > +bool fixed_nvid)
> > > +{
> > > +u32 pixel_m, pixel_n;
> > > +u32 mvid, nvid;
> > > +u64 mvid_calc;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +if (fixed_nvid) {
> > > +nvid = DP_LINK_CONSTANT_N_VALUE;
> > > +DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
> > > +
> > > +/*
> > > + * For intermediate results, use 64 bit arithmetic to avoid
> > > + * loss of precision.
> > > + */
> > > +mvid_calc = (u64) stream_rate_khz * nvid;
> > > +mvid_calc = div_u64(mvid_calc, rate);
> > > +
> > > +/*
> > > + * truncate back to 32 bits as this final divided value will
> > > + * always be within the range of a 32 bit unsigned int.
> > > + */
> > > +mvid = (u32) mvid_calc;
> > > +DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
> > > +rate, stream_rate_khz);
> > > +} else {
> > > +pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
> > > +pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);
> > > +DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
> > > +
> > > +mvid = (pixel_m & 0xFFFF) * 5;
> > > +nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
> > > +
> > > +DRM_DEBUG_DP("rate = %d\n", rate);
> > > +
> > > +switch (drm_dp_link_rate_to_bw_code(rate)) {
> > > +case DP_LINK_BW_5_4:
> > > +nvid *= 2;
> > > +break;
> > > +case DP_LINK_BW_8_1:
> > > +nvid *= 3;
> > > +break;
> > > +default:
> > > +break;
> > > +}
> > > +}
> > > +
> > > +DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
> > > +dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
> > > +dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
> > > +}
> > > +
> > > +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
> > > +u32 pattern)
> > > +{
> > > +int bit, ret;
> > > +u32 data;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +bit = BIT(pattern - 1);
> > > +DRM_DEBUG_DP("hw: bit=%d train=%d\n", bit, pattern);
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL, bit);
> > > +
> > > +bit = BIT(pattern - 1) << DP_MAINLINK_READY_LINK_TRAINING_SHIFT;
> > > +
> > > +/* Poll for mainlink ready status */
> > > +ret = readx_poll_timeout(readl, catalog->io->dp_link.base +
> > > REG_DP_MAINLINK_READY,
> > > + data, data & bit,
> > > + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> > > +if (ret < 0) {
> > > +DRM_ERROR("set pattern for link_train=%d failed\n", pattern);
> > > +return ret;
> > > +}
> > > +return 0;
> > > +}
> > > +
> > > +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
> > > flip)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 typec_ctrl;
> > > +
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL,
> > > +USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX |
> > > +USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX);
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_PHY_MODE_CTRL,
> > > +USB3_DP_COM_PHY_MODE_DP);
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET,
> > > +USB3_DP_COM_SW_RESET_SET);
> > > +
> > > +/* Default configuration i.e CC1 */
> > > +typec_ctrl = USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX;
> > > +if (flip)
> > > +typec_ctrl |= USB3_DP_COM_TYPEC_CTRL_PORTSEL;
> > > +
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_TYPEC_CTRL, typec_ctrl);
> > > +
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SWI_CTRL, 0x00);
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_SW_RESET, 0x00);
> > > +
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_POWER_DOWN_CTRL,
> > > +USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN);
> > > +dp_write_usb_cm(catalog, REG_USB3_DP_COM_RESET_OVRD_CTRL, 0x00);
> > > +
> > > +}
> > > +
> > > +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
> > > +{
> > > +u32 sw_reset;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +void __iomem *base;
> > > +
> > > +base = catalog->io->dp_ahb.base;
> > > +
> > > +sw_reset = dp_read_ahb(catalog, REG_DP_SW_RESET);
> > > +
> > > +sw_reset |= DP_SW_RESET;
> > > +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> > > +usleep_range(1000, 1100); /* h/w recommended delay */
> > > +
> > > +sw_reset &= ~DP_SW_RESET;
> > > +dp_write_ahb(catalog, REG_DP_SW_RESET, sw_reset);
> > > +}
> > > +
> > > +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog)
> > > +{
> > > +u32 data;
> > > +int ret;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +/* Poll for mainlink ready status */
> > > +ret = readx_poll_timeout(readl,
> > > + catalog->io->dp_link.base + REG_DP_MAINLINK_READY,
> > > + data, data & DP_MAINLINK_READY_FOR_VIDEO,
> > > + POLLING_SLEEP_US, POLLING_TIMEOUT_US);
> > > +if (ret < 0) {
> > > +DRM_ERROR("mainlink not ready\n");
> > > +return false;
> > > +}
> > > +
> > > +return true;
> > > +}
> > > +
> > > +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog,
> > > +bool enable)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +void __iomem *base;
> > > +
> > > +base = catalog->io->dp_ahb.base;
> > > +
> > > +if (enable) {
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS,
> > > DP_INTERRUPT_STATUS1_MASK);
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS2,
> > > DP_INTERRUPT_STATUS2_MASK);
> > > +} else {
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS, 0x00);
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, 0x00);
> > > +}
> > > +}
> > > +
> > > +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
> > > en)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +if (en) {
> > > +u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
> > > +
> > > +dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
> > > +DP_DP_HPD_PLUG_INT_ACK | DP_DP_IRQ_HPD_INT_ACK |
> > > +DP_DP_HPD_REPLUG_INT_ACK | DP_DP_HPD_UNPLUG_INT_ACK);
> > > +dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
> > > +DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK |
> > > +DP_DP_HPD_REPLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK);
> > > +
> > > +/* Configure REFTIMER */
> > > +reftimer |= REFTIMER_DEFAULT_VALUE;
> > > +dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
> > > +/* Enable HPD */
> > > +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
> > > +} else {
> > > +/* Disable HPD */
> > > +dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, 0x0);
> > > +}
> > > +}
> > > +
> > > +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 intr, intr_ack;
> > > +
> > > +intr = dp_read_ahb(catalog, REG_DP_INTR_STATUS2);
> > > +intr &= ~DP_INTERRUPT_STATUS2_MASK;
> > > +intr_ack = (intr & DP_INTERRUPT_STATUS2) <<
> > > DP_INTERRUPT_STATUS_ACK_SHIFT;
> > > +dp_write_ahb(catalog, REG_DP_INTR_STATUS2, intr_ack |
> > > DP_INTERRUPT_STATUS2_MASK);
> > > +
> > > +return intr;
> > > +}
> > > +
> > > +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_ahb(catalog, REG_DP_PHY_CTRL,
> > > +DP_PHY_CTRL_SW_RESET_PLL | DP_PHY_CTRL_SW_RESET);
> > > +usleep_range(1000, 1100); /* h/w recommended delay */
> > > +dp_write_ahb(catalog, REG_DP_PHY_CTRL, 0x0);
> > > +}
> > > +
> > > +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog,
> > > +bool flipped, u8 ln_cnt)
> > > +{
> > > +u32 info;
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u8 orientation = BIT(!!flipped);
> > > +
> > > +info = ln_cnt & DP_PHY_SPARE0_MASK;
> > > +info |= (orientation & DP_PHY_SPARE0_MASK) <<
> > > DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT;
> > > +DRM_DEBUG_DP("Shared Info = 0x%x\n", info);
> > > +
> > > +dp_write_phy(catalog, REG_DP_PHY_SPARE0, info);
> > > +}
> > > +
> > > +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog,
> > > +u8 v_level, u8 p_level)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u8 voltage_swing_cfg, pre_emphasis_cfg;
> > > +
> > > +DRM_DEBUG_DP("hw: v=%d p=%d\n", v_level, p_level);
> > > +
> > > +voltage_swing_cfg = vm_voltage_swing[v_level][p_level];
> > > +pre_emphasis_cfg = vm_pre_emphasis[v_level][p_level];
> > > +
> > > +if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) {
> > > +DRM_ERROR("invalid vx (0x%x=0x%x), px (0x%x=0x%x\n",
> > > +v_level, voltage_swing_cfg, p_level, pre_emphasis_cfg);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +/* Enable MUX to use Cursor values from these registers */
> > > +voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> > > +pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> > > +
> > > +/* Configure host and panel only if both values are allowed */
> > > +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
> > > voltage_swing_cfg);
> > > +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_DRV_LVL,
> > > voltage_swing_cfg);
> > > +dp_write_ln_tx0(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
> > > pre_emphasis_cfg);
> > > +dp_write_ln_tx1(catalog, REG_DP_PHY_TXn_TX_EMP_POST1_LVL,
> > > pre_emphasis_cfg);
> > > +DRM_DEBUG_DP("hw: vx_value=0x%x px_value=0x%x\n",
> > > +voltage_swing_cfg, pre_emphasis_cfg);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> > > +u32 pattern)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 value = 0x0;
> > > +
> > > +/* Make sure to clear the current pattern before starting a new one
> > > */
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
> > > +
> > > +switch (pattern) {
> > > +case DP_LINK_QUAL_PATTERN_D10_2:
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL,
> > > DP_STATE_CTRL_LINK_TRAINING_PATTERN1);
> > > +return;
> > > +case DP_LINK_QUAL_PATTERN_PRBS7:
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL, DP_STATE_CTRL_LINK_PRBS7);
> > > +return;
> > > +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL,
> > > DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN);
> > > +/* 00111110000011111000001111100000 */
> > > +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0,
> > > 0x3E0F83E0);
> > > +/* 00001111100000111110000011111000 */
> > > +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1,
> > > 0x0F83E0F8);
> > > +/* 1111100000111110 */
> > > +dp_write_link(catalog, REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2,
> > > 0x0000F83E);
> > > +return;
> > > +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> > > +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> > > +value &= ~DP_HBR2_ERM_PATTERN;
> > > +if (pattern == DP_LINK_QUAL_PATTERN_HBR2_EYE)
> > > +value = DP_HBR2_ERM_PATTERN;
> > > +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
> > > value);
> > > +value |= SCRAMBLER_RESET_COUNT_VALUE;
> > > +dp_write_link(catalog, REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET,
> > > value);
> > > +dp_write_link(catalog, REG_DP_MAINLINK_LEVELS,
> > > DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2);
> > > +dp_write_link(catalog, REG_DP_STATE_CTRL,
> > > DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE);
> > > +return;
> > > +default:
> > > +DRM_DEBUG_DP("No valid test pattern requested: 0x%x\n", pattern);
> > > +return;
> > > +}
> > > +}
> > > +
> > > +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +return dp_read_link(catalog, REG_DP_MAINLINK_READY);
> > > +}
> > > +
> > > +/* panel related catalog functions */
> > > +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_link(catalog, REG_DP_TOTAL_HOR_VER, dp_catalog->total);
> > > +dp_write_link(catalog, REG_DP_START_HOR_VER_FROM_SYNC,
> > > dp_catalog->sync_start);
> > > +dp_write_link(catalog, REG_DP_HSYNC_VSYNC_WIDTH_POLARITY,
> > > dp_catalog->width_blanking);
> > > +dp_write_link(catalog, REG_DP_ACTIVE_HOR_VER, dp_catalog->dp_active);
> > > +return 0;
> > > +}
> > > +
> > > +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> > > +struct drm_display_mode *drm_mode)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +u32 hsync_period, vsync_period;
> > > +u32 display_v_start, display_v_end;
> > > +u32 hsync_start_x, hsync_end_x;
> > > +u32 v_sync_width;
> > > +u32 hsync_ctl;
> > > +u32 display_hctl;
> > > +
> > > +/* TPG config parameters*/
> > > +hsync_period = drm_mode->htotal;
> > > +vsync_period = drm_mode->vtotal;
> > > +
> > > +display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *
> > > +hsync_period);
> > > +display_v_end = ((vsync_period - drm_mode->vsync_start -
> > > +drm_mode->vdisplay) * hsync_period) - 1;
> > > +
> > > +display_v_start += drm_mode->htotal - drm_mode->hsync_start;
> > > +display_v_end -= drm_mode->hsync_start - drm_mode->hdisplay;
> > > +
> > > +hsync_start_x = drm_mode->htotal - drm_mode->hsync_start;
> > > +hsync_end_x = hsync_period - drm_mode->hsync_start -
> > > +drm_mode->hdisplay - 1;
> > > +
> > > +v_sync_width = drm_mode->vsync_end - drm_mode->vsync_start;
> > > +
> > > +hsync_ctl = (hsync_period << 16) |
> > > +(drm_mode->hsync_end - drm_mode->hsync_start);
> > > +display_hctl = (hsync_end_x << 16) | hsync_start_x;
> > > +
> > > +
> > > +dp_write_p0(catalog, MMSS_DP_INTF_CONFIG, 0x0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_HSYNC_CTL, hsync_ctl);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F0, vsync_period *
> > > +hsync_period);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0, v_sync_width
> > > *
> > > +hsync_period);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PERIOD_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_HCTL, display_hctl);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_HCTL, 0);
> > > +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F0, display_v_start);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F0, display_v_end);
> > > +dp_write_p0(catalog, MMSS_INTF_DISPLAY_V_START_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_DISPLAY_V_END_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F0, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F0, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_START_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_ACTIVE_V_END_F1, 0);
> > > +dp_write_p0(catalog, MMSS_DP_INTF_POLARITY_CTL, 0);
> > > +
> > > +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL,
> > > DP_TPG_CHECKERED_RECT_PATTERN);
> > > +dp_write_p0(catalog, MMSS_DP_TPG_VIDEO_CONFIG,
> > > +DP_TPG_VIDEO_CONFIG_BPP_8BIT |
> > > +DP_TPG_VIDEO_CONFIG_RGB);
> > > +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, DP_BIST_ENABLE_DPBIST_EN);
> > > +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN,
> > > DP_TIMING_ENGINE_EN_EN);
> > > +DRM_DEBUG_DP("%s: enabled tpg\n", __func__);
> > > +}
> > > +
> > > +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog = container_of(dp_catalog,
> > > +struct dp_catalog_private, dp_catalog);
> > > +
> > > +dp_write_p0(catalog, MMSS_DP_TPG_MAIN_CONTROL, 0x0);
> > > +dp_write_p0(catalog, MMSS_DP_BIST_ENABLE, 0x0);
> > > +dp_write_p0(catalog, MMSS_DP_TIMING_ENGINE_EN, 0x0);
> > > +return;
> > > +}
> > > +
> > > +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
> > > *io)
> > > +{
> > > +int rc = 0;
> > > +struct dp_catalog *dp_catalog;
> > > +struct dp_catalog_private *catalog;
> > > +
> > > +if (!io) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +catalog  = devm_kzalloc(dev, sizeof(*catalog), GFP_KERNEL);
> > > +if (!catalog) {
> > > +rc = -ENOMEM;
> > > +goto error;
> > > +}
> > > +
> > > +catalog->dev = dev;
> > > +catalog->io = io;
> > > +
> > > +dp_catalog = &catalog->dp_catalog;
> > > +
> > > +return dp_catalog;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_catalog_put(struct dp_catalog *dp_catalog)
> > > +{
> > > +struct dp_catalog_private *catalog;
> > > +
> > > +if (!dp_catalog)
> > > +return;
> > > +
> > > +catalog = container_of(dp_catalog, struct dp_catalog_private,
> > > +dp_catalog);
> > > +
> > > +devm_kfree(catalog->dev, catalog);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
> > > b/drivers/gpu/drm/msm/dp/dp_catalog.h
> > > new file mode 100644
> > > index 0000000..51c82dd
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> > > @@ -0,0 +1,84 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_CATALOG_H_
> > > +#define _DP_CATALOG_H_
> > > +
> > > +#include "dp_parser.h"
> > > +
> > > +/* interrupts */
> > > +#define DP_INTR_HPDBIT(0)
> > > +#define DP_INTR_AUX_I2C_DONEBIT(3)
> > > +#define DP_INTR_WRONG_ADDRBIT(6)
> > > +#define DP_INTR_TIMEOUTBIT(9)
> > > +#define DP_INTR_NACK_DEFERBIT(12)
> > > +#define DP_INTR_WRONG_DATA_CNTBIT(15)
> > > +#define DP_INTR_I2C_NACKBIT(18)
> > > +#define DP_INTR_I2C_DEFERBIT(21)
> > > +#define DP_INTR_PLL_UNLOCKEDBIT(24)
> > > +#define DP_INTR_AUX_ERRORBIT(27)
> > > +
> > > +#define DP_INTR_READY_FOR_VIDEOBIT(0)
> > > +#define DP_INTR_IDLE_PATTERN_SENTBIT(3)
> > > +#define DP_INTR_FRAME_ENDBIT(6)
> > > +#define DP_INTR_CRC_UPDATEDBIT(9)
> > > +
> > > +struct dp_catalog {
> > > +u32 aux_data;
> > > +u32 total;
> > > +u32 sync_start;
> > > +u32 width_blanking;
> > > +u32 dp_active;
> > > +};
> > > +
> > > +/* AUX APIs */
> > > +u32 dp_catalog_aux_read_data(struct dp_catalog *dp_catalog);
> > > +int dp_catalog_aux_write_data(struct dp_catalog *dp_catalog);
> > > +int dp_catalog_aux_write_trans(struct dp_catalog *dp_catalog);
> > > +int dp_catalog_aux_clear_trans(struct dp_catalog *dp_catalog, bool
> > > read);
> > > +void dp_catalog_aux_reset(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool
> > > enable);
> > > +void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog,
> > > +struct dp_aux_cfg *cfg, enum dp_phy_aux_config_type type);
> > > +void dp_catalog_aux_setup(struct dp_catalog *dp_catalog,
> > > +struct dp_aux_cfg *aux_cfg);
> > > +int dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> > > +
> > > +/* DP Controller APIs */
> > > +void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
> > > state);
> > > +void dp_catalog_ctrl_config_ctrl(struct dp_catalog *dp_catalog, u32
> > > config);
> > > +void dp_catalog_ctrl_lane_mapping(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
> > > bool
> > > enable);
> > > +void dp_catalog_ctrl_config_misc(struct dp_catalog *dp_catalog, u32
> > > cc, u32 tb);
> > > +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog, u32
> > > rate,
> > > +u32 stream_rate_khz, bool fixed_nvid);
> > > +int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog, u32
> > > pattern);
> > > +void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_ctrl_usb_reset(struct dp_catalog *dp_catalog, bool
> > > flip);
> > > +bool dp_catalog_ctrl_mainlink_ready(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_ctrl_enable_irq(struct dp_catalog *dp_catalog, bool
> > > enable);
> > > +void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog, bool
> > > enable);
> > > +void dp_catalog_ctrl_phy_reset(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_ctrl_phy_lane_cfg(struct dp_catalog *dp_catalog, bool
> > > flipped,
> > > +u8 lane_cnt);
> > > +int dp_catalog_ctrl_update_vx_px(struct dp_catalog *dp_catalog, u8
> > > v_level,
> > > +u8 p_level);
> > > +int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_ctrl_update_transfer_unit(struct dp_catalog
> > > *dp_catalog,
> > > +u32 dp_tu, u32 valid_boundary, u32 valid_boundary2);
> > > +void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> > > +u32 pattern);
> > > +u32 dp_catalog_ctrl_read_phy_pattern(struct dp_catalog *dp_catalog);
> > > +
> > > +/* DP Panel APIs */
> > > +int dp_catalog_panel_timing_cfg(struct dp_catalog *dp_catalog);
> > > +void dp_catalog_panel_tpg_enable(struct dp_catalog *dp_catalog,
> > > +struct drm_display_mode *drm_mode);
> > > +void dp_catalog_panel_tpg_disable(struct dp_catalog *dp_catalog);
> > > +
> > > +struct dp_catalog *dp_catalog_get(struct device *dev, struct dp_io
> > > *io);
> > > +void dp_catalog_put(struct dp_catalog *catalog);
> > > +
> > > +#endif /* _DP_CATALOG_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> > > b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> > > new file mode 100644
> > > index 0000000..a4575ea
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> > > @@ -0,0 +1,1590 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/types.h>
> > > +#include <linux/completion.h>
> > > +#include <linux/delay.h>
> > > +#include <drm/drm_fixed.h>
> > > +
> > > +#include "dp_reg.h"
> > > +#include "dp_ctrl.h"
> > > +
> > > +#define DP_KHZ_TO_HZ 1000
> > > +#define IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES(30 * HZ / 1000) /* 30
> > > ms */
> > > +#define WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES (HZ / 2)
> > > +
> > > +#define DP_CTRL_INTR_READY_FOR_VIDEO     BIT(0)
> > > +#define DP_CTRL_INTR_IDLE_PATTERN_SENT  BIT(3)
> > > +
> > > +#define MR_LINK_TRAINING1  0x8
> > > +#define MR_LINK_SYMBOL_ERM 0x80
> > > +#define MR_LINK_PRBS7 0x100
> > > +#define MR_LINK_CUSTOM80 0x200
> > > +
> > > +struct dp_tu_calc_input {
> > > +u64 lclk;        /* 162, 270, 540 and 810 */
> > > +u64 pclk_khz;    /* in KHz */
> > > +u64 hactive;     /* active h-width */
> > > +u64 hporch;      /* bp + fp + pulse */
> > > +int nlanes;      /* no.of.lanes */
> > > +int bpp;         /* bits */
> > > +int pixel_enc;   /* 444, 420, 422 */
> > > +int dsc_en;     /* dsc on/off */
> > > +int async_en;   /* async mode */
> > > +};
> > > +
> > > +struct dp_vc_tu_mapping_table {
> > > +u8 valid_boundary_link;
> > > +u16 delay_start_link;
> > > +bool boundary_moderation_en;
> > > +u8 valid_lower_boundary_link;
> > > +u8 upper_boundary_count;
> > > +u8 lower_boundary_count;
> > > +u8 tu_size_minus1;
> > > +};
> > > +
> > > +struct dp_ctrl_private {
> > > +struct dp_ctrl dp_ctrl;
> > > +
> > > +struct device *dev;
> > > +struct dp_aux *aux;
> > > +struct dp_panel *panel;
> > > +struct dp_link *link;
> > > +struct dp_power *power;
> > > +struct dp_parser *parser;
> > > +struct dp_catalog *catalog;
> > > +
> > > +struct completion idle_comp;
> > > +struct mutex push_idle_mutex;
> > > +struct completion video_comp;
> > > +};
> > > +
> > > +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +mutex_lock(&ctrl->push_idle_mutex);
> > > +
> > > +reinit_completion(&ctrl->idle_comp);
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_PUSH_IDLE);
> > > +
> > > +if (!wait_for_completion_timeout(&ctrl->idle_comp,
> > > +IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
> > > +pr_warn("PUSH_IDLE pattern timedout\n");
> > > +
> > > +mutex_unlock(&ctrl->push_idle_mutex);
> > > +pr_debug("mainlink off done\n");
> > > +}
> > > +
> > > +static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
> > > +{
> > > +u32 config = 0, tbd;
> > > +u8 *dpcd = ctrl->panel->dpcd;
> > > +
> > > +/* Default-> LSCLK DIV: 1/4 LCLK  */
> > > +config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
> > > +
> > > +/* Scrambler reset enable */
> > > +if (dpcd[DP_EDP_CONFIGURATION_CAP] &
> > > DP_ALTERNATE_SCRAMBLER_RESET_CAP)
> > > +config |= DP_CONFIGURATION_CTRL_ASSR;
> > > +
> > > +tbd = dp_link_get_test_bits_depth(ctrl->link,
> > > +ctrl->panel->dp_mode.bpp);
> > > +
> > > +if (tbd == DP_TEST_BIT_DEPTH_UNKNOWN) {
> > > +pr_debug("BIT_DEPTH not set. Configure default\n");
> > > +tbd = DP_TEST_BIT_DEPTH_8;
> > > +}
> > > +
> > > +config |= tbd << DP_CONFIGURATION_CTRL_BPC_SHIFT;
> > > +
> > > +/* Num of Lanes */
> > > +config |= ((ctrl->link->link_params.num_lanes - 1)
> > > +<< DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT);
> > > +
> > > +if (drm_dp_enhanced_frame_cap(dpcd))
> > > +config |= DP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
> > > +
> > > +config |= DP_CONFIGURATION_CTRL_P_INTERLACED; /* progressive video */
> > > +
> > > +/* sync clock & static Mvid */
> > > +config |= DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN;
> > > +config |= DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK;
> > > +
> > > +dp_catalog_ctrl_config_ctrl(ctrl->catalog, config);
> > > +}
> > > +
> > > +/**
> > > + * dp_ctrl_configure_source_params() - configures DP transmitter
> > > source params
> > > + * @ctrl: Display Port Driver data
> > > + *
> > > + * Configures the DP transmitter source params including details such
> > > as lane
> > > + * configuration, output format and sink/panel timing information.
> > > + */
> > > +static void dp_ctrl_configure_source_params(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +u32 cc, tb;
> > > +
> > > +dp_catalog_ctrl_lane_mapping(ctrl->catalog);
> > > +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> > > +
> > > +dp_ctrl_config_ctrl(ctrl);
> > > +
> > > +tb = dp_link_get_test_bits_depth(ctrl->link,
> > > +ctrl->panel->dp_mode.bpp);
> > > +cc = dp_link_get_colorimetry_config(ctrl->link);
> > > +dp_catalog_ctrl_config_misc(ctrl->catalog, cc, tb);
> > > +dp_panel_timing_cfg(ctrl->panel);
> > > +}
> > > +
> > > +/*
> > > + * The structure and few functions present below are IP/Hardware
> > > + * specific implementation. Most of the implementation will not
> > > + * have coding comments
> > > + */
> > > +struct tu_algo_data {
> > > +s64 lclk_fp;
> > > +s64 pclk_fp;
> > > +s64 lwidth;
> > > +s64 hbp_relative_to_pclk;
> > > +int nlanes;
> > > +int bpp;
> > > +int pixelEnc;
> > > +int dsc_en;
> > > +int async_en;
> > > +int bpc;
> > > +
> > > +uint delay_start_link_extra_pixclk;
> > > +int extra_buffer_margin;
> > > +s64 ratio_fp;
> > > +s64 original_ratio_fp;
> > > +
> > > +s64 err_fp;
> > > +s64 n_err_fp;
> > > +s64 n_n_err_fp;
> > > +int tu_size;
> > > +int tu_size_desired;
> > > +int tu_size_minus1;
> > > +
> > > +int valid_boundary_link;
> > > +s64 resulting_valid_fp;
> > > +s64 total_valid_fp;
> > > +s64 effective_valid_fp;
> > > +s64 effective_valid_recorded_fp;
> > > +int n_tus;
> > > +int n_tus_per_lane;
> > > +int paired_tus;
> > > +int remainder_tus;
> > > +int remainder_tus_upper;
> > > +int remainder_tus_lower;
> > > +int extra_bytes;
> > > +int filler_size;
> > > +int delay_start_link;
> > > +
> > > +int extra_pclk_cycles;
> > > +int extra_pclk_cycles_in_link_clk;
> > > +s64 ratio_by_tu_fp;
> > > +s64 average_valid2_fp;
> > > +int new_valid_boundary_link;
> > > +int remainder_symbols_exist;
> > > +int n_symbols;
> > > +s64 n_remainder_symbols_per_lane_fp;
> > > +s64 last_partial_tu_fp;
> > > +s64 TU_ratio_err_fp;
> > > +
> > > +int n_tus_incl_last_incomplete_tu;
> > > +int extra_pclk_cycles_tmp;
> > > +int extra_pclk_cycles_in_link_clk_tmp;
> > > +int extra_required_bytes_new_tmp;
> > > +int filler_size_tmp;
> > > +int lower_filler_size_tmp;
> > > +int delay_start_link_tmp;
> > > +
> > > +bool boundary_moderation_en;
> > > +int boundary_mod_lower_err;
> > > +int upper_boundary_count;
> > > +int lower_boundary_count;
> > > +int i_upper_boundary_count;
> > > +int i_lower_boundary_count;
> > > +int valid_lower_boundary_link;
> > > +int even_distribution_BF;
> > > +int even_distribution_legacy;
> > > +int even_distribution;
> > > +int min_hblank_violated;
> > > +s64 delay_start_time_fp;
> > > +s64 hbp_time_fp;
> > > +s64 hactive_time_fp;
> > > +s64 diff_abs_fp;
> > > +
> > > +s64 ratio;
> > > +};
> > > +
> > > +static int _tu_param_compare(s64 a, s64 b)
> > > +{
> > > +u32 a_int, a_frac;
> > > +u32 b_int, b_frac;
> > > +
> > > +if (a == b)
> > > +return 0;
> > > +
> > > +a_int = (a >> 32) & 0x7FFFFFFF;
> > > +a_frac = a & 0xFFFFFFFF;
> > > +
> > > +b_int = (b >> 32) & 0x7FFFFFFF;
> > > +b_frac = b & 0xFFFFFFFF;
> > > +
> > > +if (a_int > b_int)
> > > +return 1;
> > > +else if (a_int < b_int)
> > > +return 2;
> > > +else if (a_frac > b_frac)
> > > +return 1;
> > > +else
> > > +return 2;
> > > +}
> > > +
> > > +static void _tu_valid_boundary_calc(struct tu_algo_data *tu)
> > > +{
> > > +s64 temp1_fp, temp2_fp, temp, temp1, temp2;
> > > +int compare_result_1, compare_result_2, compare_result_3;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> > > +
> > > +tu->new_valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> > > +
> > > +temp = (tu->i_upper_boundary_count *
> > > +tu->new_valid_boundary_link +
> > > +tu->i_lower_boundary_count *
> > > +(tu->new_valid_boundary_link-1));
> > > +tu->average_valid2_fp = drm_fixp_from_fraction(temp,
> > > +(tu->i_upper_boundary_count +
> > > +tu->i_lower_boundary_count));
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> > > +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> > > +tu->n_tus = drm_fixp2int(temp2_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->n_tus, 1);
> > > +temp2_fp = drm_fixp_mul(temp1_fp, tu->average_valid2_fp);
> > > +temp1_fp = drm_fixp_from_fraction(tu->n_symbols, 1);
> > > +temp2_fp = temp1_fp - temp2_fp;
> > > +temp1_fp = drm_fixp_from_fraction(tu->nlanes, 1);
> > > +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> > > +tu->n_remainder_symbols_per_lane_fp = temp2_fp;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +tu->last_partial_tu_fp =
> > > +drm_fixp_div(tu->n_remainder_symbols_per_lane_fp,
> > > +temp1_fp);
> > > +
> > > +if (tu->n_remainder_symbols_per_lane_fp != 0)
> > > +tu->remainder_symbols_exist = 1;
> > > +else
> > > +tu->remainder_symbols_exist = 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->n_tus, tu->nlanes);
> > > +tu->n_tus_per_lane = drm_fixp2int(temp1_fp);
> > > +
> > > +tu->paired_tus = (int)((tu->n_tus_per_lane) /
> > > +(tu->i_upper_boundary_count +
> > > + tu->i_lower_boundary_count));
> > > +
> > > +tu->remainder_tus = tu->n_tus_per_lane - tu->paired_tus *
> > > +(tu->i_upper_boundary_count +
> > > +tu->i_lower_boundary_count);
> > > +
> > > +if ((tu->remainder_tus - tu->i_upper_boundary_count) > 0) {
> > > +tu->remainder_tus_upper = tu->i_upper_boundary_count;
> > > +tu->remainder_tus_lower = tu->remainder_tus -
> > > +tu->i_upper_boundary_count;
> > > +} else {
> > > +tu->remainder_tus_upper = tu->remainder_tus;
> > > +tu->remainder_tus_lower = 0;
> > > +}
> > > +
> > > +temp = tu->paired_tus * (tu->i_upper_boundary_count *
> > > +tu->new_valid_boundary_link +
> > > +tu->i_lower_boundary_count *
> > > +(tu->new_valid_boundary_link - 1)) +
> > > +(tu->remainder_tus_upper *
> > > + tu->new_valid_boundary_link) +
> > > +(tu->remainder_tus_lower *
> > > +(tu->new_valid_boundary_link - 1));
> > > +tu->total_valid_fp = drm_fixp_from_fraction(temp, 1);
> > > +
> > > +if (tu->remainder_symbols_exist) {
> > > +temp1_fp = tu->total_valid_fp +
> > > +tu->n_remainder_symbols_per_lane_fp;
> > > +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> > > +temp2_fp = temp2_fp + tu->last_partial_tu_fp;
> > > +temp1_fp = drm_fixp_div(temp1_fp, temp2_fp);
> > > +} else {
> > > +temp2_fp = drm_fixp_from_fraction(tu->n_tus_per_lane, 1);
> > > +temp1_fp = drm_fixp_div(tu->total_valid_fp, temp2_fp);
> > > +}
> > > +tu->effective_valid_fp = temp1_fp;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> > > +tu->n_n_err_fp = tu->effective_valid_fp - temp2_fp;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu->ratio_fp, temp1_fp);
> > > +tu->n_err_fp = tu->average_valid2_fp - temp2_fp;
> > > +
> > > +tu->even_distribution = tu->n_tus % tu->nlanes == 0 ? 1 : 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->bpp, 8);
> > > +temp2_fp = drm_fixp_from_fraction(tu->lwidth, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +temp2_fp = drm_fixp_div(temp1_fp, tu->average_valid2_fp);
> > > +
> > > +if (temp2_fp)
> > > +tu->n_tus_incl_last_incomplete_tu = drm_fixp2int_ceil(temp2_fp);
> > > +else
> > > +tu->n_tus_incl_last_incomplete_tu = 0;
> > > +
> > > +temp1 = 0;
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> > > +temp1_fp = tu->average_valid2_fp - temp2_fp;
> > > +temp2_fp = drm_fixp_from_fraction(tu->n_tus_incl_last_incomplete_tu,
> > > 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +if (temp1_fp)
> > > +temp1 = drm_fixp2int_ceil(temp1_fp);
> > > +
> > > +temp = tu->i_upper_boundary_count * tu->nlanes;
> > > +temp1_fp = drm_fixp_from_fraction(tu->tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu->original_ratio_fp, temp1_fp);
> > > +temp1_fp = drm_fixp_from_fraction(tu->new_valid_boundary_link, 1);
> > > +temp2_fp = temp1_fp - temp2_fp;
> > > +temp1_fp = drm_fixp_from_fraction(temp, 1);
> > > +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> > > +
> > > +if (temp2_fp)
> > > +temp2 = drm_fixp2int_ceil(temp2_fp);
> > > +else
> > > +temp2 = 0;
> > > +tu->extra_required_bytes_new_tmp = (int)(temp1 + temp2);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(8, tu->bpp);
> > > +temp2_fp = drm_fixp_from_fraction(
> > > +tu->extra_required_bytes_new_tmp, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +if (temp1_fp)
> > > +tu->extra_pclk_cycles_tmp = drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu->extra_pclk_cycles_tmp = 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->extra_pclk_cycles_tmp, 1);
> > > +temp2_fp = drm_fixp_div(tu->lclk_fp, tu->pclk_fp);
> > > +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> > > +
> > > +if (temp1_fp)
> > > +tu->extra_pclk_cycles_in_link_clk_tmp =
> > > +drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu->extra_pclk_cycles_in_link_clk_tmp = 0;
> > > +
> > > +tu->filler_size_tmp = tu->tu_size - tu->new_valid_boundary_link;
> > > +
> > > +tu->lower_filler_size_tmp = tu->filler_size_tmp + 1;
> > > +
> > > +tu->delay_start_link_tmp = tu->extra_pclk_cycles_in_link_clk_tmp +
> > > +tu->lower_filler_size_tmp +
> > > +tu->extra_buffer_margin;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu->delay_start_link_tmp, 1);
> > > +tu->delay_start_time_fp = drm_fixp_div(temp1_fp, tu->lclk_fp);
> > > +
> > > +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
> > > tu->diff_abs_fp);
> > > +if (compare_result_1 == 2)
> > > +compare_result_1 = 1;
> > > +else
> > > +compare_result_1 = 0;
> > > +
> > > +compare_result_2 = _tu_param_compare(tu->n_n_err_fp, tu->err_fp);
> > > +if (compare_result_2 == 2)
> > > +compare_result_2 = 1;
> > > +else
> > > +compare_result_2 = 0;
> > > +
> > > +compare_result_3 = _tu_param_compare(tu->hbp_time_fp,
> > > +tu->delay_start_time_fp);
> > > +if (compare_result_3 == 2)
> > > +compare_result_3 = 0;
> > > +else
> > > +compare_result_3 = 1;
> > > +
> > > +if (((tu->even_distribution == 1) ||
> > > +((tu->even_distribution_BF == 0) &&
> > > +(tu->even_distribution_legacy == 0))) &&
> > > +tu->n_err_fp >= 0 && tu->n_n_err_fp >= 0 &&
> > > +compare_result_2 &&
> > > +(compare_result_1 || (tu->min_hblank_violated == 1)) &&
> > > +(tu->new_valid_boundary_link - 1) > 0 &&
> > > +compare_result_3 &&
> > > +(tu->delay_start_link_tmp <= 1023)) {
> > > +tu->upper_boundary_count = tu->i_upper_boundary_count;
> > > +tu->lower_boundary_count = tu->i_lower_boundary_count;
> > > +tu->err_fp = tu->n_n_err_fp;
> > > +tu->boundary_moderation_en = true;
> > > +tu->tu_size_desired = tu->tu_size;
> > > +tu->valid_boundary_link = tu->new_valid_boundary_link;
> > > +tu->effective_valid_recorded_fp = tu->effective_valid_fp;
> > > +tu->even_distribution_BF = 1;
> > > +tu->delay_start_link = tu->delay_start_link_tmp;
> > > +} else if (tu->boundary_mod_lower_err == 0) {
> > > +compare_result_1 = _tu_param_compare(tu->n_n_err_fp,
> > > +tu->diff_abs_fp);
> > > +if (compare_result_1 == 2)
> > > +tu->boundary_mod_lower_err = 1;
> > > +}
> > > +}
> > > +
> > > +static void _dp_ctrl_calc_tu(struct dp_tu_calc_input *in,
> > > +   struct dp_vc_tu_mapping_table *tu_table)
> > > +{
> > > +struct tu_algo_data tu;
> > > +int compare_result_1, compare_result_2;
> > > +u64 temp = 0;
> > > +s64 temp_fp = 0, temp1_fp = 0, temp2_fp = 0;
> > > +
> > > +s64 LCLK_FAST_SKEW_fp = drm_fixp_from_fraction(6, 10000); /* 0.0006
> > > */
> > > +s64 const_p49_fp = drm_fixp_from_fraction(49, 100); /* 0.49 */
> > > +s64 const_p56_fp = drm_fixp_from_fraction(56, 100); /* 0.56 */
> > > +s64 RATIO_SCALE_fp = drm_fixp_from_fraction(1001, 1000);
> > > +
> > > +u8 DP_BRUTE_FORCE = 1;
> > > +s64 BRUTE_FORCE_THRESHOLD_fp = drm_fixp_from_fraction(1, 10); /* 0.1
> > > */
> > > +uint EXTRA_PIXCLK_CYCLE_DELAY = 4;
> > > +uint HBLANK_MARGIN = 4;
> > > +
> > > +memset(&tu, 0, sizeof(tu));
> > > +
> > > +tu.lclk_fp              = drm_fixp_from_fraction(in->lclk, 1);
> > > +tu.pclk_fp              = drm_fixp_from_fraction(in->pclk_khz, 1000);
> > > +tu.lwidth               = in->hactive;
> > > +tu.hbp_relative_to_pclk = in->hporch;
> > > +tu.nlanes               = in->nlanes;
> > > +tu.bpp                  = in->bpp;
> > > +tu.pixelEnc             = in->pixel_enc;
> > > +tu.dsc_en               = in->dsc_en;
> > > +tu.async_en             = in->async_en;
> > > +
> > > +tu.err_fp = drm_fixp_from_fraction(1000, 1); /* 1000 */
> > > +
> > > +if (tu.pixelEnc == 420) {
> > > +temp_fp = drm_fixp_from_fraction(2, 1);
> > > +tu.pclk_fp = drm_fixp_div(tu.pclk_fp, temp_fp);
> > > +tu.lwidth /= 2;
> > > +tu.hbp_relative_to_pclk /= 2;
> > > +}
> > > +
> > > +if (tu.pixelEnc == 422) {
> > > +switch (tu.bpp) {
> > > +case 24:
> > > +tu.bpp = 16;
> > > +tu.bpc = 8;
> > > +break;
> > > +case 30:
> > > +tu.bpp = 20;
> > > +tu.bpc = 10;
> > > +break;
> > > +default:
> > > +tu.bpp = 16;
> > > +tu.bpc = 8;
> > > +break;
> > > +}
> > > +} else {
> > > +tu.bpc = tu.bpp/3;
> > > +}
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(4, 1);
> > > +temp2_fp = drm_fixp_mul(temp1_fp, tu.lclk_fp);
> > > +temp_fp = drm_fixp_div(temp2_fp, tu.pclk_fp);
> > > +tu.extra_buffer_margin = drm_fixp2int_ceil(temp_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> > > +temp2_fp = drm_fixp_mul(tu.pclk_fp, temp1_fp);
> > > +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> > > +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> > > +tu.ratio_fp = drm_fixp_div(temp2_fp, tu.lclk_fp);
> > > +
> > > +tu.original_ratio_fp = tu.ratio_fp;
> > > +tu.boundary_moderation_en = false;
> > > +tu.upper_boundary_count = 0;
> > > +tu.lower_boundary_count = 0;
> > > +tu.i_upper_boundary_count = 0;
> > > +tu.i_lower_boundary_count = 0;
> > > +tu.valid_lower_boundary_link = 0;
> > > +tu.even_distribution_BF = 0;
> > > +tu.even_distribution_legacy = 0;
> > > +tu.even_distribution = 0;
> > > +tu.delay_start_time_fp = 0;
> > > +
> > > +tu.err_fp = drm_fixp_from_fraction(1000, 1);
> > > +tu.n_err_fp = 0;
> > > +tu.n_n_err_fp = 0;
> > > +
> > > +tu.ratio = drm_fixp2int(tu.ratio_fp);
> > > +if ((((u32)tu.lwidth % tu.nlanes) != 0) &&
> > > +!tu.ratio && tu.dsc_en == 0) {
> > > +tu.ratio_fp = drm_fixp_mul(tu.ratio_fp, RATIO_SCALE_fp);
> > > +tu.ratio = drm_fixp2int(tu.ratio_fp);
> > > +if (tu.ratio)
> > > +tu.ratio_fp = drm_fixp_from_fraction(1, 1);
> > > +}
> > > +
> > > +if (tu.ratio > 1)
> > > +tu.ratio = 1;
> > > +
> > > +if (tu.ratio == 1)
> > > +goto tu_size_calc;
> > > +
> > > +compare_result_1 = _tu_param_compare(tu.ratio_fp, const_p49_fp);
> > > +if (!compare_result_1 || compare_result_1 == 1)
> > > +compare_result_1 = 1;
> > > +else
> > > +compare_result_1 = 0;
> > > +
> > > +compare_result_2 = _tu_param_compare(tu.ratio_fp, const_p56_fp);
> > > +if (!compare_result_2 || compare_result_2 == 2)
> > > +compare_result_2 = 1;
> > > +else
> > > +compare_result_2 = 0;
> > > +
> > > +if (tu.dsc_en && compare_result_1 && compare_result_2) {
> > > +HBLANK_MARGIN += 4;
> > > +DRM_DEBUG_DP("Info: increase HBLANK_MARGIN to %d\n", HBLANK_MARGIN);
> > > +}
> > > +
> > > +tu_size_calc:
> > > +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> > > +temp1_fp = drm_fixp_from_fraction(tu.tu_size, 1);
> > > +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> > > +temp = drm_fixp2int_ceil(temp2_fp);
> > > +temp1_fp = drm_fixp_from_fraction(temp, 1);
> > > +tu.n_err_fp = temp1_fp - temp2_fp;
> > > +
> > > +if (tu.n_err_fp < tu.err_fp) {
> > > +tu.err_fp = tu.n_err_fp;
> > > +tu.tu_size_desired = tu.tu_size;
> > > +}
> > > +}
> > > +
> > > +tu.tu_size_minus1 = tu.tu_size_desired - 1;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> > > +temp2_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> > > +tu.valid_boundary_link = drm_fixp2int_ceil(temp2_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> > > +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> > > +temp2_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> > > +temp2_fp = drm_fixp_div(temp2_fp, temp1_fp);
> > > +tu.n_tus = drm_fixp2int(temp2_fp);
> > > +
> > > +tu.even_distribution_legacy = tu.n_tus % tu.nlanes == 0 ? 1 : 0;
> > > +DRM_DEBUG_DP("Info: n_sym = %d, num_of_tus = %d\n",
> > > +tu.valid_boundary_link, tu.n_tus);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> > > +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> > > +temp1_fp = drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> > > +temp2_fp = temp1_fp - temp2_fp;
> > > +temp1_fp = drm_fixp_from_fraction(tu.n_tus + 1, 1);
> > > +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> > > +
> > > +temp = drm_fixp2int(temp2_fp);
> > > +if (temp && temp2_fp)
> > > +tu.extra_bytes = drm_fixp2int_ceil(temp2_fp);
> > > +else
> > > +tu.extra_bytes = 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.extra_bytes, 1);
> > > +temp2_fp = drm_fixp_from_fraction(8, tu.bpp);
> > > +temp1_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> > > +
> > > +temp = drm_fixp2int(temp1_fp);
> > > +if (temp && temp1_fp)
> > > +tu.extra_pclk_cycles = drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu.extra_pclk_cycles = 0;
> > > +
> > > +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> > > +temp2_fp = drm_fixp_from_fraction(tu.extra_pclk_cycles, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +temp = drm_fixp2int(temp1_fp);
> > > +if (temp && temp1_fp)
> > > +tu.extra_pclk_cycles_in_link_clk = drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu.extra_pclk_cycles_in_link_clk = 0;
> > > +
> > > +tu.filler_size = tu.tu_size_desired - tu.valid_boundary_link;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> > > +tu.ratio_by_tu_fp = drm_fixp_mul(tu.ratio_fp, temp1_fp);
> > > +
> > > +tu.delay_start_link = tu.extra_pclk_cycles_in_link_clk +
> > > +tu.filler_size + tu.extra_buffer_margin;
> > > +
> > > +tu.resulting_valid_fp =
> > > +drm_fixp_from_fraction(tu.valid_boundary_link, 1);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.tu_size_desired, 1);
> > > +temp2_fp = drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> > > +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(
> > > +(tu.hbp_relative_to_pclk - HBLANK_MARGIN), 1);
> > > +tu.hbp_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> > > +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> > > +
> > > +compare_result_1 = _tu_param_compare(tu.hbp_time_fp,
> > > +tu.delay_start_time_fp);
> > > +if (compare_result_1 == 2) /* if (hbp_time_fp < delay_start_time_fp)
> > > */
> > > +tu.min_hblank_violated = 1;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> > > +tu.hactive_time_fp = drm_fixp_div(temp1_fp, tu.pclk_fp);
> > > +
> > > +compare_result_2 = _tu_param_compare(tu.hactive_time_fp,
> > > +tu.delay_start_time_fp);
> > > +if (compare_result_2 == 2)
> > > +tu.min_hblank_violated = 1;
> > > +
> > > +tu.delay_start_time_fp = 0;
> > > +
> > > +/* brute force */
> > > +
> > > +tu.delay_start_link_extra_pixclk = EXTRA_PIXCLK_CYCLE_DELAY;
> > > +tu.diff_abs_fp = tu.resulting_valid_fp - tu.ratio_by_tu_fp;
> > > +
> > > +temp = drm_fixp2int(tu.diff_abs_fp);
> > > +if (!temp && tu.diff_abs_fp <= 0xffff)
> > > +tu.diff_abs_fp = 0;
> > > +
> > > +/* if(diff_abs < 0) diff_abs *= -1 */
> > > +if (tu.diff_abs_fp < 0)
> > > +tu.diff_abs_fp = drm_fixp_mul(tu.diff_abs_fp, -1);
> > > +
> > > +tu.boundary_mod_lower_err = 0;
> > > +if ((tu.diff_abs_fp != 0 &&
> > > +((tu.diff_abs_fp > BRUTE_FORCE_THRESHOLD_fp) ||
> > > + (tu.even_distribution_legacy == 0) ||
> > > + (DP_BRUTE_FORCE == 1))) ||
> > > +(tu.min_hblank_violated == 1)) {
> > > +do {
> > > +tu.err_fp = drm_fixp_from_fraction(1000, 1);
> > > +
> > > +temp1_fp = drm_fixp_div(tu.lclk_fp, tu.pclk_fp);
> > > +temp2_fp = drm_fixp_from_fraction(
> > > +tu.delay_start_link_extra_pixclk, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +if (temp1_fp)
> > > +tu.extra_buffer_margin =
> > > +drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu.extra_buffer_margin = 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> > > +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +
> > > +if (temp1_fp)
> > > +tu.n_symbols = drm_fixp2int_ceil(temp1_fp);
> > > +else
> > > +tu.n_symbols = 0;
> > > +
> > > +for (tu.tu_size = 32; tu.tu_size <= 64; tu.tu_size++) {
> > > +for (tu.i_upper_boundary_count = 1;
> > > +tu.i_upper_boundary_count <= 15;
> > > +tu.i_upper_boundary_count++) {
> > > +for (tu.i_lower_boundary_count = 1;
> > > +tu.i_lower_boundary_count <= 15;
> > > +tu.i_lower_boundary_count++) {
> > > +_tu_valid_boundary_calc(&tu);
> > > +}
> > > +}
> > > +}
> > > +tu.delay_start_link_extra_pixclk--;
> > > +} while (tu.boundary_moderation_en != true &&
> > > +tu.boundary_mod_lower_err == 1 &&
> > > +tu.delay_start_link_extra_pixclk != 0);
> > > +
> > > +if (tu.boundary_moderation_en == true) {
> > > +temp1_fp = drm_fixp_from_fraction(
> > > +(tu.upper_boundary_count *
> > > +tu.valid_boundary_link +
> > > +tu.lower_boundary_count *
> > > +(tu.valid_boundary_link - 1)), 1);
> > > +temp2_fp = drm_fixp_from_fraction(
> > > +(tu.upper_boundary_count +
> > > +tu.lower_boundary_count), 1);
> > > +tu.resulting_valid_fp =
> > > +drm_fixp_div(temp1_fp, temp2_fp);
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(
> > > +tu.tu_size_desired, 1);
> > > +tu.ratio_by_tu_fp =
> > > +drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> > > +
> > > +tu.valid_lower_boundary_link =
> > > +tu.valid_boundary_link - 1;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> > > +temp2_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> > > +temp1_fp = drm_fixp_mul(temp2_fp, temp1_fp);
> > > +temp2_fp = drm_fixp_div(temp1_fp,
> > > +tu.resulting_valid_fp);
> > > +tu.n_tus = drm_fixp2int(temp2_fp);
> > > +
> > > +tu.tu_size_minus1 = tu.tu_size_desired - 1;
> > > +tu.even_distribution_BF = 1;
> > > +
> > > +temp1_fp =
> > > +drm_fixp_from_fraction(tu.tu_size_desired, 1);
> > > +temp2_fp =
> > > +drm_fixp_div(tu.resulting_valid_fp, temp1_fp);
> > > +tu.TU_ratio_err_fp = temp2_fp - tu.original_ratio_fp;
> > > +}
> > > +}
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.lwidth, 1);
> > > +temp2_fp = drm_fixp_mul(LCLK_FAST_SKEW_fp, temp1_fp);
> > > +
> > > +if (temp2_fp)
> > > +temp = drm_fixp2int_ceil(temp2_fp);
> > > +else
> > > +temp = 0;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.nlanes, 1);
> > > +temp2_fp = drm_fixp_mul(tu.original_ratio_fp, temp1_fp);
> > > +temp1_fp = drm_fixp_from_fraction(tu.bpp, 8);
> > > +temp2_fp = drm_fixp_div(temp1_fp, temp2_fp);
> > > +temp1_fp = drm_fixp_from_fraction(temp, 1);
> > > +temp2_fp = drm_fixp_mul(temp1_fp, temp2_fp);
> > > +temp = drm_fixp2int(temp2_fp);
> > > +
> > > +if (tu.async_en)
> > > +tu.delay_start_link += (int)temp;
> > > +
> > > +temp1_fp = drm_fixp_from_fraction(tu.delay_start_link, 1);
> > > +tu.delay_start_time_fp = drm_fixp_div(temp1_fp, tu.lclk_fp);
> > > +
> > > +/* OUTPUTS */
> > > +tu_table->valid_boundary_link       = tu.valid_boundary_link;
> > > +tu_table->delay_start_link          = tu.delay_start_link;
> > > +tu_table->boundary_moderation_en    = tu.boundary_moderation_en;
> > > +tu_table->valid_lower_boundary_link = tu.valid_lower_boundary_link;
> > > +tu_table->upper_boundary_count      = tu.upper_boundary_count;
> > > +tu_table->lower_boundary_count      = tu.lower_boundary_count;
> > > +tu_table->tu_size_minus1            = tu.tu_size_minus1;
> > > +
> > > +DRM_DEBUG_DP("TU: valid_boundary_link: %d\n",
> > > tu_table->valid_boundary_link);
> > > +DRM_DEBUG_DP("TU: delay_start_link: %d\n",
> > > tu_table->delay_start_link);
> > > +DRM_DEBUG_DP("TU: boundary_moderation_en: %d\n",
> > > +tu_table->boundary_moderation_en);
> > > +DRM_DEBUG_DP("TU: valid_lower_boundary_link: %d\n",
> > > +tu_table->valid_lower_boundary_link);
> > > +DRM_DEBUG_DP("TU: upper_boundary_count: %d\n",
> > > +tu_table->upper_boundary_count);
> > > +DRM_DEBUG_DP("TU: lower_boundary_count: %d\n",
> > > +tu_table->lower_boundary_count);
> > > +DRM_DEBUG_DP("TU: tu_size_minus1: %d\n", tu_table->tu_size_minus1);
> > > +}
> > > +
> > > +static void dp_ctrl_calc_tu_parameters(struct dp_ctrl_private *ctrl,
> > > +struct dp_vc_tu_mapping_table *tu_table)
> > > +{
> > > +struct dp_tu_calc_input in;
> > > +struct drm_display_mode *drm_mode;
> > > +
> > > +drm_mode = &ctrl->panel->dp_mode.drm_mode;
> > > +
> > > +in.lclk = ctrl->link->link_params.rate / 1000;
> > > +in.pclk_khz = drm_mode->clock;
> > > +in.hactive = drm_mode->hdisplay;
> > > +in.hporch = drm_mode->htotal - drm_mode->hdisplay;
> > > +in.nlanes = ctrl->link->link_params.num_lanes;
> > > +in.bpp = ctrl->panel->dp_mode.bpp;
> > > +in.pixel_enc = 444;
> > > +in.dsc_en = 0;
> > > +in.async_en = 0;
> > > +
> > > +_dp_ctrl_calc_tu(&in, tu_table);
> > > +}
> > > +
> > > +static void dp_ctrl_setup_tr_unit(struct dp_ctrl_private *ctrl)
> > > +{
> > > +u32 dp_tu = 0x0;
> > > +u32 valid_boundary = 0x0;
> > > +u32 valid_boundary2 = 0x0;
> > > +struct dp_vc_tu_mapping_table tu_calc_table;
> > > +
> > > +dp_ctrl_calc_tu_parameters(ctrl, &tu_calc_table);
> > > +
> > > +dp_tu |= tu_calc_table.tu_size_minus1;
> > > +valid_boundary |= tu_calc_table.valid_boundary_link;
> > > +valid_boundary |= (tu_calc_table.delay_start_link << 16);
> > > +
> > > +valid_boundary2 |= (tu_calc_table.valid_lower_boundary_link << 1);
> > > +valid_boundary2 |= (tu_calc_table.upper_boundary_count << 16);
> > > +valid_boundary2 |= (tu_calc_table.lower_boundary_count << 20);
> > > +
> > > +if (tu_calc_table.boundary_moderation_en)
> > > +valid_boundary2 |= BIT(0);
> > > +
> > > +pr_debug("dp_tu=0x%x, valid_boundary=0x%x, valid_boundary2=0x%x\n",
> > > +dp_tu, valid_boundary, valid_boundary2);
> > > +
> > > +dp_catalog_ctrl_update_transfer_unit(ctrl->catalog,
> > > +dp_tu, valid_boundary, valid_boundary2);
> > > +}
> > > +
> > > +static int dp_ctrl_wait4video_ready(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int ret = 0;
> > > +
> > > +if (!wait_for_completion_timeout(&ctrl->video_comp,
> > > +WAIT_FOR_VIDEO_READY_TIMEOUT_JIFFIES)) {
> > > +DRM_ERROR("Link Train timedout\n");
> > > +ret = -ETIMEDOUT;
> > > +}
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
> > > +{
> > > +struct dp_link *link = ctrl->link;
> > > +int ret = 0, lane, lane_cnt;
> > > +u8 buf[4];
> > > +u32 max_level_reached = 0;
> > > +u32 voltage_swing_level = link->phy_params.v_level;
> > > +u32 pre_emphasis_level = link->phy_params.p_level;
> > > +
> > > +ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> > > +voltage_swing_level, pre_emphasis_level);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +if (voltage_swing_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> > > +DRM_DEBUG_DP("max. voltage swing level reached %d\n",
> > > +voltage_swing_level);
> > > +max_level_reached |= DP_TRAIN_MAX_SWING_REACHED;
> > > +}
> > > +
> > > +if (pre_emphasis_level == DP_TRAIN_PRE_EMPHASIS_MAX) {
> > > +DRM_DEBUG_DP("max. pre-emphasis level reached %d\n",
> > > +pre_emphasis_level);
> > > +max_level_reached  |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
> > > +}
> > > +
> > > +pre_emphasis_level <<= DP_TRAIN_PRE_EMPHASIS_SHIFT;
> > > +
> > > +lane_cnt = ctrl->link->link_params.num_lanes;
> > > +for (lane = 0; lane < lane_cnt; lane++)
> > > +buf[lane] = voltage_swing_level | pre_emphasis_level |
> > > max_level_reached;
> > > +
> > > +DRM_DEBUG_DP("sink: p|v=0x%x\n", voltage_swing_level |
> > > pre_emphasis_level);
> > > +ret = drm_dp_dpcd_write(ctrl->aux->drm_aux, DP_TRAINING_LANE0_SET,
> > > buf, lane_cnt);
> > > +if (ret == lane_cnt)
> > > +ret = 0;
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static bool dp_ctrl_train_pattern_set(struct dp_ctrl_private *ctrl,
> > > +u8 pattern)
> > > +{
> > > +u8 buf;
> > > +int ret = 0;
> > > +
> > > +DRM_DEBUG_DP("sink: pattern=%x\n", pattern);
> > > +
> > > +buf = pattern;
> > > +ret = drm_dp_dpcd_writeb(ctrl->aux->drm_aux, DP_TRAINING_PATTERN_SET,
> > > buf);
> > > +return ret == 1;
> > > +}
> > > +
> > > +static int dp_ctrl_read_link_status(struct dp_ctrl_private *ctrl,
> > > +    u8 *link_status)
> > > +{
> > > +int len = 0;
> > > +u32 const offset = DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS;
> > > +u32 link_status_read_max_retries = 100;
> > > +
> > > +while (--link_status_read_max_retries) {
> > > +len = drm_dp_dpcd_read_link_status(ctrl->aux->drm_aux,
> > > +link_status);
> > > +if (len != DP_LINK_STATUS_SIZE) {
> > > +DRM_ERROR("DP link status read failed, err: %d\n", len);
> > > +return len;
> > > +}
> > > +
> > > +if (!(link_status[offset] & DP_LINK_STATUS_UPDATED))
> > > +return 0;
> > > +}
> > > +
> > > +return -ETIMEDOUT;
> > > +}
> > > +
> > > +static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int tries, old_v_level, ret = 0;
> > > +u8 link_status[DP_LINK_STATUS_SIZE];
> > > +int const maximum_retries = 5;
> > > +
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> > > +
> > > +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog,
> > > DP_TRAINING_PATTERN_1);
> > > +if (ret)
> > > +return ret;
> > > +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_1 |
> > > +DP_LINK_SCRAMBLING_DISABLE);
> > > +ret = dp_ctrl_update_vx_px(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +tries = 0;
> > > +old_v_level = ctrl->link->phy_params.v_level;
> > > +for (tries = 0; tries < maximum_retries; tries++) {
> > > +drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
> > > +
> > > +ret = dp_ctrl_read_link_status(ctrl, link_status);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +if (drm_dp_clock_recovery_ok(link_status,
> > > +ctrl->link->link_params.num_lanes)) {
> > > +return ret;
> > > +}
> > > +
> > > +if (ctrl->link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> > > +DRM_ERROR_RATELIMITED("max v_level reached\n");
> > > +return -EAGAIN;
> > > +}
> > > +
> > > +if (old_v_level != ctrl->link->phy_params.v_level) {
> > > +tries = 0;
> > > +old_v_level = ctrl->link->phy_params.v_level;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("clock recovery not done, adjusting vx px\n");
> > > +
> > > +dp_link_adjust_levels(ctrl->link, link_status);
> > > +ret = dp_ctrl_update_vx_px(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +}
> > > +
> > > +DRM_ERROR("max tries reached\n");
> > > +return -ETIMEDOUT;
> > > +}
> > > +
> > > +static int dp_ctrl_link_rate_down_shift(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int ret = 0;
> > > +
> > > +switch (ctrl->link->link_params.rate) {
> > > +case 810000:
> > > +ctrl->link->link_params.rate = 540000;
> > > +break;
> > > +case 540000:
> > > +ctrl->link->link_params.rate = 270000;
> > > +break;
> > > +case 270000:
> > > +case 162000:
> > > +default:
> > > +ctrl->link->link_params.rate = 162000;
> > > +break;
> > > +};
> > > +
> > > +DRM_DEBUG_DP("new rate=0x%x\n", ctrl->link->link_params.rate);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
> > > +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> > > +}
> > > +
> > > +static int dp_ctrl_link_training_2(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int tries = 0, ret = 0;
> > > +char pattern;
> > > +int const maximum_retries = 5;
> > > +u8 link_status[DP_LINK_STATUS_SIZE];
> > > +
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> > > +
> > > +if (drm_dp_tps3_supported(ctrl->panel->dpcd))
> > > +pattern = DP_TRAINING_PATTERN_3;
> > > +else
> > > +pattern = DP_TRAINING_PATTERN_2;
> > > +
> > > +ret = dp_ctrl_update_vx_px(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +ret = dp_catalog_ctrl_set_pattern(ctrl->catalog, pattern);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
> > > +
> > > +for (tries = 0; tries <= maximum_retries; tries++) {
> > > +drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
> > > +
> > > +ret = dp_ctrl_read_link_status(ctrl, link_status);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +if (drm_dp_channel_eq_ok(link_status,
> > > +ctrl->link->link_params.num_lanes))
> > > +return ret;
> > > +
> > > +dp_link_adjust_levels(ctrl->link, link_status);
> > > +ret = dp_ctrl_update_vx_px(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +}
> > > +
> > > +return -ETIMEDOUT;
> > > +}
> > > +
> > > +static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int ret = 0;
> > > +u8 encoding = DP_SET_ANSI_8B10B;
> > > +struct drm_dp_link link_info = {0};
> > > +
> > > +ctrl->link->phy_params.p_level = 0;
> > > +ctrl->link->phy_params.v_level = 0;
> > > +
> > > +dp_ctrl_config_ctrl(ctrl);
> > > +
> > > +ret = drm_dp_link_probe(ctrl->aux->drm_aux, &link_info);
> > > +if (ret < 0) {
> > > +DRM_ERROR("failed to retrieve link capabilities. ret=%d\n", ret);
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> > > +return ret;
> > > +}
> > > +
> > > +drm_dp_link_configure(ctrl->aux->drm_aux, &link_info);
> > > +drm_dp_dpcd_write(ctrl->aux->drm_aux,
> > > DP_MAIN_LINK_CHANNEL_CODING_SET,
> > > +&encoding, 1);
> > > +
> > > +ret = dp_ctrl_link_train_1(ctrl);
> > > +if (ret) {
> > > +DRM_ERROR("link training #1 failed. ret=%d\n", ret);
> > > +goto end;
> > > +}
> > > +
> > > +/* print success info as this is a result of user initiated action */
> > > +DRM_DEBUG_DP("link training #1 successful\n");
> > > +
> > > +ret = dp_ctrl_link_training_2(ctrl);
> > > +if (ret) {
> > > +DRM_ERROR("link training #2 failed. ret=%d\n", ret);
> > > +goto end;
> > > +}
> > > +
> > > +/* print success info as this is a result of user initiated action */
> > > +DRM_DEBUG_DP("link training #2 successful\n");
> > > +
> > > +end:
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, 0);
> > > +
> > > +dp_ctrl_clear_training_pattern(ctrl);
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl, bool
> > > train)
> > > +{
> > > +bool mainlink_ready = false;
> > > +int ret = 0;
> > > +
> > > +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, true);
> > > +
> > > +ret = dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, false);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> > > +return ret;
> > > +
> > > +if (train) {
> > > +/*
> > > + * As part of previous calls, DP controller state might have
> > > + * transitioned to PUSH_IDLE. In order to start transmitting a link
> > > + * training pattern, we have to first do a DP software reset.
> > > + */
> > > +dp_catalog_ctrl_reset(ctrl->catalog);
> > > +
> > > +ret = dp_ctrl_link_train(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +}
> > > +
> > > +/*
> > > + * Set up transfer unit values and set controller state to send
> > > + * video.
> > > + */
> > > +dp_ctrl_setup_tr_unit(ctrl);
> > > +dp_catalog_ctrl_state_ctrl(ctrl->catalog, DP_STATE_CTRL_SEND_VIDEO);
> > > +
> > > +ret = dp_ctrl_wait4video_ready(ctrl);
> > > +if (ret)
> > > +return ret;
> > > +
> > > +mainlink_ready = dp_catalog_ctrl_mainlink_ready(ctrl->catalog);
> > > +DRM_DEBUG_DP("mainlink %s\n", mainlink_ready ? "READY" : "NOT
> > > READY");
> > > +return ret;
> > > +}
> > > +
> > > +static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
> > > +   char *name, u32 rate)
> > > +{
> > > +u32 num = ctrl->parser->mp[DP_CTRL_PM].num_clk;
> > > +struct dss_clk *cfg = ctrl->parser->mp[DP_CTRL_PM].clk_config;
> > > +
> > > +while (num && strcmp(cfg->clk_name, name)) {
> > > +num--;
> > > +cfg++;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("setting rate=%d on clk=%s\n", rate, name);
> > > +
> > > +if (num)
> > > +cfg->rate = rate;
> > > +else
> > > +DRM_ERROR("%s clock could not be set with rate %d\n", name, rate);
> > > +}
> > > +
> > > +static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +int ret = 0;
> > > +
> > > +dp_power_set_link_clk_parent(ctrl->power);
> > > +dp_power_set_pixel_clk_parent(ctrl->power);
> > > +
> > > +dp_ctrl_set_clock_rate(ctrl, "ctrl_link_clk",
> > > ctrl->link->link_params.rate);
> > > +
> > > +dp_ctrl_set_clock_rate(ctrl, "ctrl_pixel_clk",
> > > ctrl->dp_ctrl.pixel_rate);
> > > +
> > > +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
> > > +if (ret)
> > > +DRM_ERROR("Unabled to start link clocks. ret=%d\n", ret);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +
> > > +if (!dp_ctrl) {
> > > +DRM_ERROR("Invalid input data\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +ctrl->dp_ctrl.orientation = flip;
> > > +
> > > +dp_catalog_ctrl_usb_reset(ctrl->catalog, flip);
> > > +dp_catalog_ctrl_phy_reset(ctrl->catalog);
> > > +dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +/**
> > > + * dp_ctrl_host_deinit() - Uninitialize DP controller
> > > + * @ctrl: Display Port Driver data
> > > + *
> > > + * Perform required steps to uninitialize DP controller
> > > + * and its resources.
> > > + */
> > > +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +
> > > +if (!dp_ctrl) {
> > > +DRM_ERROR("Invalid input data\n");
> > > +return;
> > > +}
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
> > > +
> > > +DRM_DEBUG_DP("Host deinitialized successfully\n");
> > > +}
> > > +
> > > +static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
> > > +{
> > > +u8 *dpcd = ctrl->panel->dpcd;
> > > +
> > > +/*
> > > + * For better interop experience, used a fixed NVID=0x8000
> > > + * whenever connected to a VGA dongle downstream.
> > > + */
> > > +if (drm_dp_is_branch(dpcd))
> > > +return (drm_dp_has_quirk(&ctrl->panel->desc,
> > > +DP_DPCD_QUIRK_CONSTANT_N));
> > > +
> > > +return false;
> > > +}
> > > +
> > > +static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +int ret = 0;
> > > +
> > > +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> > > +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> > > +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> > > +/*
> > > + * Disable and re-enable the mainlink clock since the
> > > + * link clock might have been adjusted as part of the
> > > + * link maintenance.
> > > + */
> > > +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> > > +if (ret) {
> > > +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> > > +return ret;
> > > +}
> > > +/* hw recommended delay before re-enabling clocks */
> > > +msleep(20);
> > > +
> > > +ret = dp_ctrl_enable_mainlink_clocks(ctrl);
> > > +if (ret) {
> > > +DRM_ERROR("Failed to enable mainlink clks. ret=%d\n", ret);
> > > +return ret;
> > > +}
> > > +
> > > +dp_ctrl_configure_source_params(ctrl);
> > > +dp_catalog_ctrl_config_msa(ctrl->catalog,
> > > +ctrl->link->link_params.rate,
> > > +ctrl->dp_ctrl.pixel_rate, dp_ctrl_use_fixed_nvid(ctrl));
> > > +reinit_completion(&ctrl->idle_comp);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
> > > +{
> > > +int ret = 0;
> > > +int tries, max_tries = 10;
> > > +
> > > +dp_ctrl_push_idle(&ctrl->dp_ctrl);
> > > +dp_catalog_ctrl_reset(ctrl->catalog);
> > > +
> > > +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> > > +
> > > +for (tries = 0; tries < max_tries; tries++) {
> > > +ret = dp_ctrl_reinitialize_mainlink(ctrl);
> > > +if (ret) {
> > > +DRM_ERROR("Failed to reinitialize mainlink. ret=%d\n", ret);
> > > +break;
> > > +}
> > > +
> > > +ret = dp_ctrl_setup_main_link(ctrl, true);
> > > +if (ret == -EAGAIN) /* try with lower link rate */
> > > +dp_ctrl_link_rate_down_shift(ctrl);
> > > +}
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +int ret = 0;
> > > +
> > > +if (!ctrl->link->phy_params.phy_test_pattern_sel) {
> > > +DRM_DEBUG_DP("no test pattern selected by sink\n");
> > > +return ret;
> > > +}
> > > +
> > > +dp_ctrl_push_idle(&ctrl->dp_ctrl);
> > > +/*
> > > + * The global reset will need DP link related clocks to be
> > > + * running. Add the global reset just before disabling the
> > > + * link clocks and core clocks.
> > > + */
> > > +dp_catalog_ctrl_reset(ctrl->catalog);
> > > +ret = dp_ctrl_off(&ctrl->dp_ctrl);
> > > +if (ret) {
> > > +DRM_ERROR("failed to disable DP controller\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_ctrl_on(&ctrl->dp_ctrl);
> > > +if (ret)
> > > +DRM_ERROR("failed to enable DP controller\n");
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static bool dp_ctrl_send_phy_test_pattern(struct dp_ctrl_private
> > > *ctrl)
> > > +{
> > > +bool success = false;
> > > +u32 pattern_sent = 0x0;
> > > +u32 pattern_requested = ctrl->link->phy_params.phy_test_pattern_sel;
> > > +
> > > +DRM_DEBUG_DP("request: 0x%x\n", pattern_requested);
> > > +
> > > +if (dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> > > +ctrl->link->phy_params.v_level,
> > > +ctrl->link->phy_params.p_level)) {
> > > +DRM_ERROR("Failed to set v/p levels\n");
> > > +return false;
> > > +}
> > > +dp_catalog_ctrl_send_phy_pattern(ctrl->catalog, pattern_requested);
> > > +dp_link_send_test_response(ctrl->link);
> > > +
> > > +pattern_sent = dp_catalog_ctrl_read_phy_pattern(ctrl->catalog);
> > > +
> > > +switch (pattern_sent) {
> > > +case MR_LINK_TRAINING1:
> > > +success = pattern_requested ==
> > > +DP_LINK_QUAL_PATTERN_D10_2;
> > > +break;
> > > +case MR_LINK_SYMBOL_ERM:
> > > +success = (pattern_requested ==
> > > +DP_LINK_QUAL_PATTERN_ERROR_RATE)
> > > +|| (pattern_requested ==
> > > +DP_LINK_QUAL_PATTERN_HBR2_EYE);
> > > +break;
> > > +case MR_LINK_PRBS7:
> > > +success = pattern_requested == DP_LINK_QUAL_PATTERN_PRBS7;
> > > +break;
> > > +case MR_LINK_CUSTOM80:
> > > +success = pattern_requested ==
> > > +DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
> > > +break;
> > > +default:
> > > +success = false;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("%s: test->0x%x\n", success ? "success" : "failed",
> > > +pattern_requested);
> > > +return success;
> > > +}
> > > +
> > > +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +u32 sink_request = 0x0;
> > > +
> > > +if (!dp_ctrl) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +sink_request = ctrl->link->sink_request;
> > > +
> > > +if (sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> > > +DRM_DEBUG_DP("PHY_TEST_PATTERN request\n");
> > > +if (dp_ctrl_process_phy_test_request(ctrl)) {
> > > +DRM_ERROR("process phy_test_req failed\n");
> > > +return;
> > > +}
> > > +}
> > > +
> > > +if (sink_request & DP_LINK_STATUS_UPDATED)
> > > +if (dp_ctrl_link_maintenance(ctrl)) {
> > > +DRM_ERROR("link_maintenance failed: STATUS_UPDATED\n");
> > > +return;
> > > +}
> > > +
> > > +
> > > +if (sink_request & DP_TEST_LINK_TRAINING) {
> > > +dp_link_send_test_response(ctrl->link);
> > > +if (dp_ctrl_link_maintenance(ctrl)) {
> > > +DRM_ERROR("link_maintenance failed: TEST_LINK_TRAINING\n");
> > > +return;
> > > +}
> > > +}
> > > +}
> > > +
> > > +int dp_ctrl_on(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +int rc = 0;
> > > +struct dp_ctrl_private *ctrl;
> > > +u32 rate = 0;
> > > +u32 link_train_max_retries = 10;
> > > +u32 const phy_cts_pixel_clk_khz = 148500;
> > > +
> > > +if (!dp_ctrl)
> > > +return -EINVAL;
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +rate = ctrl->panel->link_info.rate;
> > > +
> > > +dp_power_clk_enable(ctrl->power, DP_CORE_PM, true);
> > > +dp_catalog_ctrl_hpd_config(ctrl->catalog, true);
> > > +
> > > +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
> > > +DRM_DEBUG_DP("using phy test link parameters\n");
> > > +if (!ctrl->panel->dp_mode.drm_mode.clock)
> > > +ctrl->dp_ctrl.pixel_rate = phy_cts_pixel_clk_khz;
> > > +} else {
> > > +ctrl->link->link_params.rate = rate;
> > > +ctrl->link->link_params.num_lanes =
> > > +ctrl->panel->link_info.num_lanes;
> > > +ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
> > > +ctrl->link->link_params.rate,
> > > +ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
> > > +
> > > +dp_catalog_ctrl_phy_lane_cfg(ctrl->catalog,
> > > +ctrl->dp_ctrl.orientation, ctrl->link->link_params.num_lanes);
> > > +
> > > +rc = dp_ctrl_enable_mainlink_clocks(ctrl);
> > > +if (rc)
> > > +return rc;
> > > +
> > > +while (--link_train_max_retries &&
> > > !atomic_read(&ctrl->dp_ctrl.aborted)) {
> > > +rc = dp_ctrl_reinitialize_mainlink(ctrl);
> > > +if (rc) {
> > > +DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
> > > +break;
> > > +}
> > > +rc = dp_ctrl_setup_main_link(ctrl, true);
> > > +if (!rc)
> > > +break;
> > > +/* try with lower link rate */
> > > +dp_ctrl_link_rate_down_shift(ctrl);
> > > +}
> > > +
> > > +if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
> > > +dp_ctrl_send_phy_test_pattern(ctrl);
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +int ret = 0;
> > > +
> > > +if (!dp_ctrl)
> > > +return -EINVAL;
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
> > > +dp_catalog_ctrl_reset(ctrl->catalog);
> > > +ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
> > > +if (ret) {
> > > +DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
> > > +return ret;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("DP off done\n");
> > > +return ret;
> > > +}
> > > +
> > > +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +u32 isr;
> > > +
> > > +if (!dp_ctrl)
> > > +return;
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +isr = dp_catalog_ctrl_get_interrupt(ctrl->catalog);
> > > +
> > > +if (isr & DP_CTRL_INTR_READY_FOR_VIDEO) {
> > > +DRM_DEBUG_DP("dp_video_ready\n");
> > > +complete(&ctrl->video_comp);
> > > +}
> > > +
> > > +if (isr & DP_CTRL_INTR_IDLE_PATTERN_SENT) {
> > > +DRM_DEBUG_DP("idle_patterns_sent\n");
> > > +complete(&ctrl->idle_comp);
> > > +}
> > > +}
> > > +
> > > +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> > > struct dp_panel *panel,
> > > +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
> > > *catalog,
> > > +struct dp_parser *parser)
> > > +{
> > > +int rc = 0;
> > > +struct dp_ctrl_private *ctrl;
> > > +struct dp_ctrl *dp_ctrl;
> > > +
> > > +if (!dev || !panel || !aux ||
> > > +    !link || !catalog) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> > > +if (!ctrl) {
> > > +rc = -ENOMEM;
> > > +goto error;
> > > +}
> > > +
> > > +init_completion(&ctrl->idle_comp);
> > > +init_completion(&ctrl->video_comp);
> > > +mutex_init(&ctrl->push_idle_mutex);
> > > +
> > > +/* in parameters */
> > > +ctrl->parser   = parser;
> > > +ctrl->panel    = panel;
> > > +ctrl->power    = power;
> > > +ctrl->aux      = aux;
> > > +ctrl->link     = link;
> > > +ctrl->catalog  = catalog;
> > > +ctrl->dev      = dev;
> > > +
> > > +dp_ctrl = &ctrl->dp_ctrl;
> > > +
> > > +return dp_ctrl;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
> > > +{
> > > +struct dp_ctrl_private *ctrl;
> > > +
> > > +if (!dp_ctrl)
> > > +return;
> > > +
> > > +ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> > > +
> > > +mutex_destroy(&ctrl->push_idle_mutex);
> > > +
> > > +devm_kfree(ctrl->dev, ctrl);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h
> > > b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> > > new file mode 100644
> > > index 0000000..99ab4b2
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> > > @@ -0,0 +1,34 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_CTRL_H_
> > > +#define _DP_CTRL_H_
> > > +
> > > +#include "dp_aux.h"
> > > +#include "dp_panel.h"
> > > +#include "dp_link.h"
> > > +#include "dp_parser.h"
> > > +#include "dp_power.h"
> > > +#include "dp_catalog.h"
> > > +
> > > +struct dp_ctrl {
> > > +bool orientation;
> > > +atomic_t aborted;
> > > +u32 pixel_rate;
> > > +};
> > > +
> > > +int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip);
> > > +void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
> > > +int dp_ctrl_on(struct dp_ctrl *dp_ctrl);
> > > +int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
> > > +void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
> > > +void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
> > > +void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl);
> > > +struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> > > struct dp_panel *panel,
> > > +struct dp_aux *aux, struct dp_power *power, struct dp_catalog
> > > *catalog,
> > > +struct dp_parser *parser);
> > > +void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
> > > +
> > > +#endif /* _DP_CTRL_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> > > b/drivers/gpu/drm/msm/dp/dp_display.c
> > > new file mode 100644
> > > index 0000000..a893542
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> > > @@ -0,0 +1,949 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/uaccess.h>
> > > +#include <linux/debugfs.h>
> > > +#include <linux/component.h>
> > > +#include <linux/of_irq.h>
> > > +
> > > +#include "msm_drv.h"
> > > +#include "msm_kms.h"
> > > +#include "dp_extcon.h"
> > > +#include "dp_parser.h"
> > > +#include "dp_power.h"
> > > +#include "dp_catalog.h"
> > > +#include "dp_aux.h"
> > > +#include "dp_link.h"
> > > +#include "dp_panel.h"
> > > +#include "dp_ctrl.h"
> > > +#include "dp_display.h"
> > > +#include "dp_drm.h"
> > > +
> > > +static struct msm_dp *g_dp_display;
> > > +#define HPD_STRING_SIZE 30
> > > +
> > > +struct dp_display_private {
> > > +char *name;
> > > +int irq;
> > > +
> > > +/* state variables */
> > > +bool core_initialized;
> > > +bool power_on;
> > > +bool hpd_irq_on;
> > > +bool audio_supported;
> > > +
> > > +struct platform_device *pdev;
> > > +struct dentry *root;
> > > +struct completion notification_comp;
> > > +
> > > +struct dp_usbpd   *usbpd;
> > > +struct dp_parser  *parser;
> > > +struct dp_power   *power;
> > > +struct dp_catalog *catalog;
> > > +struct dp_aux     *aux;
> > > +struct dp_link    *link;
> > > +struct dp_panel   *panel;
> > > +struct dp_ctrl    *ctrl;
> > > +
> > > +struct dp_usbpd_cb usbpd_cb;
> > > +struct dp_display_mode dp_mode;
> > > +struct msm_dp dp_display;
> > > +};
> > > +
> > > +static const struct of_device_id dp_dt_match[] = {
> > > +{.compatible = "qcom,dp-display"},
> > > +{}
> > > +};
> > > +
> > > +static irqreturn_t dp_display_irq(int irq, void *dev_id)
> > > +{
> > > +struct dp_display_private *dp = dev_id;
> > > +
> > > +if (!dp) {
> > > +DRM_ERROR("invalid data\n");
> > > +return IRQ_NONE;
> > > +}
> > > +
> > > +/* DP controller isr */
> > > +dp_ctrl_isr(dp->ctrl);
> > > +
> > > +/* DP aux isr */
> > > +dp_aux_isr(dp->aux);
> > > +
> > > +return IRQ_HANDLED;
> > > +}
> > > +
> > > +static int dp_display_bind(struct device *dev, struct device *master,
> > > +   void *data)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +struct drm_device *drm;
> > > +struct msm_drm_private *priv;
> > > +struct platform_device *pdev = to_platform_device(dev);
> > > +
> > > +if (!dev || !pdev || !master) {
> > > +DRM_ERROR("invalid param(s), dev %pK, pdev %pK, master %pK\n",
> > > +dev, pdev, master);
> > > +rc = -EINVAL;
> > > +goto end;
> > > +}
> > > +
> > > +drm = dev_get_drvdata(master);
> > > +dp = platform_get_drvdata(pdev);
> > > +if (!drm || !dp) {
> > > +DRM_ERROR("invalid param(s), drm %pK, dp %pK\n",
> > > +drm, dp);
> > > +rc = -EINVAL;
> > > +goto end;
> > > +}
> > > +
> > > +dp->dp_display.drm_dev = drm;
> > > +priv = drm->dev_private;
> > > +priv->dp = &(dp->dp_display);
> > > +
> > > +rc = dp->parser->parse(dp->parser);
> > > +if (rc) {
> > > +DRM_ERROR("device tree parsing failed\n");
> > > +goto end;
> > > +}
> > > +
> > > +rc = dp_aux_register(dp->aux);
> > > +if (rc) {
> > > +DRM_ERROR("DRM DP AUX register failed\n");
> > > +goto end;
> > > +}
> > > +
> > > +rc = dp_power_client_init(dp->power);
> > > +if (rc) {
> > > +DRM_ERROR("Power client create failed\n");
> > > +goto end;
> > > +}
> > > +
> > > +end:
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_display_unbind(struct device *dev, struct device
> > > *master,
> > > +      void *data)
> > > +{
> > > +struct dp_display_private *dp;
> > > +struct platform_device *pdev = to_platform_device(dev);
> > > +struct drm_device *drm = dev_get_drvdata(master);
> > > +struct msm_drm_private *priv = drm->dev_private;
> > > +
> > > +if (!dev || !pdev) {
> > > +DRM_ERROR("invalid param(s)\n");
> > > +return;
> > > +}
> > > +
> > > +dp = platform_get_drvdata(pdev);
> > > +if (!dp) {
> > > +DRM_ERROR("Invalid params\n");
> > > +return;
> > > +}
> > > +
> > > +(void)dp_power_client_deinit(dp->power);
> > > +(void)dp_aux_unregister(dp->aux);
> > > +priv->dp = NULL;
> > > +}
> > > +
> > > +static const struct component_ops dp_display_comp_ops = {
> > > +.bind = dp_display_bind,
> > > +.unbind = dp_display_unbind,
> > > +};
> > > +
> > > +static bool dp_display_is_ds_bridge(struct dp_panel *panel)
> > > +{
> > > +return (panel->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > > +DP_DWN_STRM_PORT_PRESENT);
> > > +}
> > > +
> > > +static bool dp_display_is_sink_count_zero(struct dp_display_private
> > > *dp)
> > > +{
> > > +return dp_display_is_ds_bridge(dp->panel) &&
> > > +(dp->link->sink_count == 0);
> > > +}
> > > +
> > > +static void dp_display_send_hpd_event(struct msm_dp *dp_display)
> > > +{
> > > +struct dp_display_private *dp;
> > > +struct drm_connector *connector;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +connector = dp->dp_display.connector;
> > > +drm_helper_hpd_irq_event(connector->dev);
> > > +}
> > > +
> > > +static int dp_display_send_hpd_notification(struct dp_display_private
> > > *dp,
> > > +    bool hpd)
> > > +{
> > > +static bool encoder_mode_set = false;
> > > +struct msm_drm_private *priv = dp->dp_display.drm_dev->dev_private;
> > > +struct msm_kms *kms = priv->kms;
> > > +
> > > +mutex_lock(&dp->dp_display.connect_mutex);
> > > +if ((hpd && dp->dp_display.is_connected) ||
> > > +(!hpd && !dp->dp_display.is_connected)) {
> > > +DRM_DEBUG_DP("HPD already %s\n", (hpd ? "on" : "off"));
> > > +mutex_unlock(&dp->dp_display.connect_mutex);
> > > +return 0;
> > > +}
> > > +
> > > +/* reset video pattern flag on disconnect */
> > > +if (!hpd)
> > > +dp->panel->video_test = false;
> > > +
> > > +dp->dp_display.is_connected = hpd;
> > > +reinit_completion(&dp->notification_comp);
> > > +
> > > +if (dp->dp_display.is_connected && dp->dp_display.encoder
> > > +&& !encoder_mode_set
> > > +&& kms->funcs->set_encoder_mode) {
> > > +kms->funcs->set_encoder_mode(kms,
> > > +dp->dp_display.encoder, false);
> > > +DRM_DEBUG_DP("set_encoder_mode() Completed\n");
> > > +encoder_mode_set = true;
> > > +}
> > > +
> > > +dp_display_send_hpd_event(&dp->dp_display);
> > > +
> > > +if (!wait_for_completion_timeout(&dp->notification_comp, HZ * 2)) {
> > > +pr_warn("%s timeout\n", hpd ? "connect" : "disconnect");
> > > +mutex_unlock(&dp->dp_display.connect_mutex);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +mutex_unlock(&dp->dp_display.connect_mutex);
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_display_process_hpd_high(struct dp_display_private *dp)
> > > +{
> > > +int rc = 0;
> > > +struct edid *edid;
> > > +
> > > +dp_aux_init(dp->aux, dp->parser->aux_cfg);
> > > +
> > > +if (dp->link->psm_enabled)
> > > +goto notify;
> > > +
> > > +rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
> > > +if (rc)
> > > +goto notify;
> > > +
> > > +dp_link_process_request(dp->link);
> > > +
> > > +if (dp_display_is_sink_count_zero(dp)) {
> > > +DRM_DEBUG_DP("no downstream devices connected\n");
> > > +rc = -EINVAL;
> > > +goto end;
> > > +}
> > > +
> > > +edid = dp->panel->edid;
> > > +
> > > +dp->audio_supported = drm_detect_monitor_audio(edid);
> > > +
> > > +dp_panel_handle_sink_request(dp->panel);
> > > +
> > > +dp->dp_display.max_pclk_khz = dp->parser->max_pclk_khz;
> > > +notify:
> > > +dp_display_send_hpd_notification(dp, true);
> > > +
> > > +end:
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_display_host_init(struct dp_display_private *dp)
> > > +{
> > > +bool flip = false;
> > > +
> > > +if (dp->core_initialized) {
> > > +DRM_DEBUG_DP("DP core already initialized\n");
> > > +return;
> > > +}
> > > +
> > > +if (dp->usbpd->orientation == ORIENTATION_CC2)
> > > +flip = true;
> > > +
> > > +dp_power_init(dp->power, flip);
> > > +dp_ctrl_host_init(dp->ctrl, flip);
> > > +enable_irq(dp->irq);
> > > +dp->core_initialized = true;
> > > +}
> > > +
> > > +static void dp_display_host_deinit(struct dp_display_private *dp)
> > > +{
> > > +if (!dp->core_initialized) {
> > > +DRM_DEBUG_DP("DP core already off\n");
> > > +return;
> > > +}
> > > +
> > > +dp_ctrl_host_deinit(dp->ctrl);
> > > +dp_aux_deinit(dp->aux);
> > > +dp_power_deinit(dp->power);
> > > +disable_irq(dp->irq);
> > > +dp->core_initialized = false;
> > > +}
> > > +
> > > +static void dp_display_process_hpd_low(struct dp_display_private *dp)
> > > +{
> > > +dp_display_send_hpd_notification(dp, false);
> > > +
> > > +dp_aux_deinit(dp->aux);
> > > +}
> > > +
> > > +static int dp_display_usbpd_configure_cb(struct device *dev)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!dev) {
> > > +DRM_ERROR("invalid dev\n");
> > > +rc = -EINVAL;
> > > +goto end;
> > > +}
> > > +
> > > +dp = dev_get_drvdata(dev);
> > > +if (!dp) {
> > > +DRM_ERROR("no driver data found\n");
> > > +rc = -ENODEV;
> > > +goto end;
> > > +}
> > > +
> > > +dp_display_host_init(dp);
> > > +
> > > +if (dp->usbpd->hpd_high)
> > > +dp_display_process_hpd_high(dp);
> > > +end:
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_display_clean(struct dp_display_private *dp)
> > > +{
> > > +dp_ctrl_push_idle(dp->ctrl);
> > > +dp_ctrl_off(dp->ctrl);
> > > +}
> > > +
> > > +static int dp_display_usbpd_disconnect_cb(struct device *dev)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!dev) {
> > > +DRM_ERROR("invalid dev\n");
> > > +rc = -EINVAL;
> > > +goto end;
> > > +}
> > > +
> > > +dp = dev_get_drvdata(dev);
> > > +if (!dp) {
> > > +DRM_ERROR("no driver data found\n");
> > > +rc = -ENODEV;
> > > +goto end;
> > > +}
> > > +
> > > +rc = dp_display_send_hpd_notification(dp, false);
> > > +
> > > +/* if cable is disconnected, reset psm_enabled flag */
> > > +if (!dp->usbpd->alt_mode_cfg_done)
> > > +dp->link->psm_enabled = false;
> > > +
> > > +if ((rc < 0) && dp->power_on)
> > > +dp_display_clean(dp);
> > > +
> > > +dp_display_host_deinit(dp);
> > > +end:
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_display_handle_video_request(struct dp_display_private
> > > *dp)
> > > +{
> > > +if (dp->link->sink_request & DP_TEST_LINK_VIDEO_PATTERN) {
> > > +/* force disconnect followed by connect */
> > > +dp->usbpd->connect(dp->usbpd, false);
> > > +dp->panel->video_test = true;
> > > +dp->usbpd->connect(dp->usbpd, true);
> > > +dp_link_send_test_response(dp->link);
> > > +}
> > > +}
> > > +
> > > +static int dp_display_handle_hpd_irq(struct dp_display_private *dp)
> > > +{
> > > +if (dp->link->sink_request & DS_PORT_STATUS_CHANGED) {
> > > +dp_display_send_hpd_notification(dp, false);
> > > +
> > > +if (dp_display_is_sink_count_zero(dp)) {
> > > +DRM_DEBUG_DP("sink count is zero, nothing to do\n");
> > > +return 0;
> > > +}
> > > +
> > > +return dp_display_process_hpd_high(dp);
> > > +}
> > > +
> > > +dp_ctrl_handle_sink_request(dp->ctrl);
> > > +
> > > +dp_display_handle_video_request(dp);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_display_usbpd_attention_cb(struct device *dev)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!dev) {
> > > +DRM_ERROR("invalid dev\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +dp = dev_get_drvdata(dev);
> > > +if (!dp) {
> > > +DRM_ERROR("no driver data found\n");
> > > +return -ENODEV;
> > > +}
> > > +
> > > +if (dp->usbpd->hpd_irq) {
> > > +dp->hpd_irq_on = true;
> > > +
> > > +rc = dp_link_process_request(dp->link);
> > > +/* check for any test request issued by sink */
> > > +if (!rc)
> > > +dp_display_handle_hpd_irq(dp);
> > > +
> > > +dp->hpd_irq_on = false;
> > > +goto end;
> > > +}
> > > +
> > > +if (!dp->usbpd->hpd_high) {
> > > +dp_display_process_hpd_low(dp);
> > > +goto end;
> > > +}
> > > +
> > > +if (dp->usbpd->alt_mode_cfg_done)
> > > +dp_display_process_hpd_high(dp);
> > > +end:
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_display_deinit_sub_modules(struct dp_display_private
> > > *dp)
> > > +{
> > > +dp_ctrl_put(dp->ctrl);
> > > +dp_link_put(dp->link);
> > > +dp_panel_put(dp->panel);
> > > +dp_aux_put(dp->aux);
> > > +dp_power_put(dp->power);
> > > +dp_catalog_put(dp->catalog);
> > > +dp_parser_put(dp->parser);
> > > +}
> > > +
> > > +static int dp_init_sub_modules(struct dp_display_private *dp)
> > > +{
> > > +int rc = 0;
> > > +struct device *dev = &dp->pdev->dev;
> > > +struct dp_usbpd_cb *cb = &dp->usbpd_cb;
> > > +struct dp_panel_in panel_in = {
> > > +.dev = dev,
> > > +};
> > > +
> > > +/* Callback APIs used for cable status change event */
> > > +cb->configure  = dp_display_usbpd_configure_cb;
> > > +cb->disconnect = dp_display_usbpd_disconnect_cb;
> > > +cb->attention  = dp_display_usbpd_attention_cb;
> > > +
> > > +dp->parser = dp_parser_get(dp->pdev);
> > > +if (IS_ERR(dp->parser)) {
> > > +rc = PTR_ERR(dp->parser);
> > > +DRM_ERROR("failed to initialize parser, rc = %d\n", rc);
> > > +dp->parser = NULL;
> > > +goto error_parser;
> > > +}
> > > +
> > > +dp->catalog = dp_catalog_get(dev, &dp->parser->io);
> > > +if (IS_ERR(dp->catalog)) {
> > > +rc = PTR_ERR(dp->catalog);
> > > +DRM_ERROR("failed to initialize catalog, rc = %d\n", rc);
> > > +dp->catalog = NULL;
> > > +goto error_catalog;
> > > +}
> > > +
> > > +dp->power = dp_power_get(dp->parser);
> > > +if (IS_ERR(dp->power)) {
> > > +rc = PTR_ERR(dp->power);
> > > +DRM_ERROR("failed to initialize power, rc = %d\n", rc);
> > > +dp->power = NULL;
> > > +goto error_power;
> > > +}
> > > +
> > > +dp->aux = dp_aux_get(dev, dp->catalog, dp->parser->aux_cfg);
> > > +if (IS_ERR(dp->aux)) {
> > > +rc = PTR_ERR(dp->aux);
> > > +DRM_ERROR("failed to initialize aux, rc = %d\n", rc);
> > > +dp->aux = NULL;
> > > +goto error_aux;
> > > +}
> > > +
> > > +dp->link = dp_link_get(dev, dp->aux);
> > > +if (IS_ERR(dp->link)) {
> > > +rc = PTR_ERR(dp->link);
> > > +DRM_ERROR("failed to initialize link, rc = %d\n", rc);
> > > +dp->link = NULL;
> > > +goto error_link;
> > > +}
> > > +
> > > +panel_in.aux = dp->aux;
> > > +panel_in.catalog = dp->catalog;
> > > +panel_in.link = dp->link;
> > > +
> > > +dp->panel = dp_panel_get(&panel_in);
> > > +if (IS_ERR(dp->panel)) {
> > > +rc = PTR_ERR(dp->panel);
> > > +DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> > > +dp->panel = NULL;
> > > +goto error_panel;
> > > +}
> > > +
> > > +dp->ctrl = dp_ctrl_get(dev, dp->link, dp->panel, dp->aux,
> > > +       dp->power, dp->catalog, dp->parser);
> > > +if (IS_ERR(dp->ctrl)) {
> > > +rc = PTR_ERR(dp->ctrl);
> > > +DRM_ERROR("failed to initialize ctrl, rc = %d\n", rc);
> > > +dp->ctrl = NULL;
> > > +goto error_ctrl;
> > > +}
> > > +
> > > +return rc;
> > > +error_ctrl:
> > > +dp_panel_put(dp->panel);
> > > +error_panel:
> > > +dp_link_put(dp->link);
> > > +error_link:
> > > +dp_aux_put(dp->aux);
> > > +error_aux:
> > > +dp_power_put(dp->power);
> > > +error_power:
> > > +dp_catalog_put(dp->catalog);
> > > +error_catalog:
> > > +dp_parser_put(dp->parser);
> > > +error_parser:
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_set_mode(struct msm_dp *dp_display,
> > > +       struct dp_display_mode *mode)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +dp->panel->dp_mode.drm_mode = mode->drm_mode;
> > > +dp->panel->dp_mode.bpp = mode->bpp;
> > > +dp->panel->dp_mode.capabilities = mode->capabilities;
> > > +dp_panel_init_panel_info(dp->panel);
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_prepare(struct msm_dp *dp)
> > > +{
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_display_enable(struct msm_dp *dp_display)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +if (dp->power_on) {
> > > +DRM_DEBUG_DP("Link already setup, return\n");
> > > +return 0;
> > > +}
> > > +
> > > +dp_aux_init(dp->aux, dp->parser->aux_cfg);
> > > +
> > > +rc = dp_ctrl_on(dp->ctrl);
> > > +if (!rc)
> > > +dp->power_on = true;
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_post_enable(struct msm_dp *dp_display)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +complete_all(&dp->notification_comp);
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_pre_disable(struct msm_dp *dp_display)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +if (dp->usbpd->alt_mode_cfg_done)
> > > +dp_link_psm_config(dp->link, &dp->panel->link_info, true);
> > > +
> > > +dp_ctrl_push_idle(dp->ctrl);
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_disable(struct msm_dp *dp_display)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +if (!dp->power_on || !dp->core_initialized)
> > > +goto error;
> > > +
> > > +dp_ctrl_off(dp->ctrl);
> > > +
> > > +dp->power_on = false;
> > > +
> > > +complete_all(&dp->notification_comp);
> > > +error:
> > > +return rc;
> > > +}
> > > +
> > > +int dp_display_request_irq(struct msm_dp *dp_display)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!dp_display) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +dp = container_of(dp_display, struct dp_display_private, dp_display);
> > > +
> > > +dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> > > +if (dp->irq < 0) {
> > > +rc = dp->irq;
> > > +DRM_ERROR("failed to get irq: %d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = devm_request_irq(&dp->pdev->dev, dp->irq, dp_display_irq,
> > > +IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> > > +if (rc < 0) {
> > > +DRM_ERROR("failed to request IRQ%u: %d\n",
> > > +dp->irq, rc);
> > > +return rc;
> > > +}
> > > +disable_irq(dp->irq);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_display_unprepare(struct msm_dp *dp)
> > > +{
> > > +return 0;
> > > +}
> > > +
> > > +int dp_display_validate_mode(struct msm_dp *dp, u32 mode_pclk_khz)
> > > +{
> > > +const u32 num_components = 3, default_bpp = 24;
> > > +struct dp_display_private *dp_display;
> > > +struct drm_dp_link *link_info;
> > > +u32 mode_rate_khz = 0, supported_rate_khz = 0, mode_bpp = 0;
> > > +
> > > +if (!dp || !mode_pclk_khz || !dp->connector) {
> > > +DRM_ERROR("invalid params\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +link_info = &dp_display->panel->link_info;
> > > +
> > > +mode_bpp = dp->connector->display_info.bpc * num_components;
> > > +if (!mode_bpp)
> > > +mode_bpp = default_bpp;
> > > +
> > > +mode_bpp = dp_panel_get_mode_bpp(dp_display->panel,
> > > +mode_bpp, mode_pclk_khz);
> > > +
> > > +mode_rate_khz = mode_pclk_khz * mode_bpp;
> > > +supported_rate_khz = link_info->num_lanes * link_info->rate * 8;
> > > +
> > > +if (mode_rate_khz > supported_rate_khz)
> > > +return MODE_BAD;
> > > +
> > > +return MODE_OK;
> > > +}
> > > +
> > > +int dp_display_get_modes(struct msm_dp *dp,
> > > +struct dp_display_mode *dp_mode)
> > > +{
> > > +struct dp_display_private *dp_display;
> > > +int ret = 0;
> > > +
> > > +if (!dp) {
> > > +DRM_ERROR("invalid params\n");
> > > +return 0;
> > > +}
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +
> > > +ret = dp_panel_get_modes(dp_display->panel,
> > > +dp->connector, dp_mode);
> > > +if (dp_mode->drm_mode.clock)
> > > +dp->max_pclk_khz = dp_mode->drm_mode.clock;
> > > +return ret;
> > > +}
> > > +
> > > +bool dp_display_check_video_test(struct msm_dp *dp)
> > > +{
> > > +struct dp_display_private *dp_display;
> > > +
> > > +if (!dp) {
> > > +DRM_ERROR("invalid params\n");
> > > +return false;
> > > +}
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +
> > > +if (dp_display->panel->video_test)
> > > +return true;
> > > +
> > > +return false;
> > > +}
> > > +
> > > +int dp_display_get_test_bpp(struct msm_dp *dp)
> > > +{
> > > +struct dp_display_private *dp_display;
> > > +
> > > +if (!dp) {
> > > +DRM_ERROR("invalid params\n");
> > > +return 0;
> > > +}
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +
> > > +return dp_link_bit_depth_to_bpp(
> > > +dp_display->link->test_video.test_bit_depth);
> > > +}
> > > +
> > > +static int dp_display_probe(struct platform_device *pdev)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!pdev || !pdev->dev.of_node) {
> > > +DRM_ERROR("pdev not found\n");
> > > +return -ENODEV;
> > > +}
> > > +
> > > +dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
> > > +if (!dp)
> > > +return -ENOMEM;
> > > +
> > > +init_completion(&dp->notification_comp);
> > > +
> > > +dp->pdev = pdev;
> > > +dp->name = "drm_dp";
> > > +
> > > +rc = dp_init_sub_modules(dp);
> > > +if (rc) {
> > > +DRM_ERROR("init sub module failed\n");
> > > +devm_kfree(&pdev->dev, dp);
> > > +return -EPROBE_DEFER;
> > > +}
> > > +
> > > +platform_set_drvdata(pdev, dp);
> > > +
> > > +mutex_init(&dp->dp_display.connect_mutex);
> > > +g_dp_display = &dp->dp_display;
> > > +
> > > +rc = component_add(&pdev->dev, &dp_display_comp_ops);
> > > +if (rc) {
> > > +DRM_ERROR("component add failed, rc=%d\n", rc);
> > > +dp_display_deinit_sub_modules(dp);
> > > +devm_kfree(&pdev->dev, dp);
> > > +}
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +static int dp_display_remove(struct platform_device *pdev)
> > > +{
> > > +struct dp_display_private *dp;
> > > +
> > > +if (!pdev)
> > > +return -EINVAL;
> > > +
> > > +dp = platform_get_drvdata(pdev);
> > > +
> > > +dp_display_deinit_sub_modules(dp);
> > > +
> > > +platform_set_drvdata(pdev, NULL);
> > > +devm_kfree(&pdev->dev, dp);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static struct platform_driver dp_display_driver = {
> > > +.probe  = dp_display_probe,
> > > +.remove = dp_display_remove,
> > > +.driver = {
> > > +.name = "msm-dp-display",
> > > +.of_match_table = dp_dt_match,
> > > +},
> > > +};
> > > +
> > > +int __init msm_dp_register(void)
> > > +{
> > > +int ret;
> > > +
> > > +ret = platform_driver_register(&dp_display_driver);
> > > +if (ret) {
> > > +DRM_ERROR("driver register failed");
> > > +return ret;
> > > +}
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +void __exit msm_dp_unregister(void)
> > > +{
> > > +platform_driver_unregister(&dp_display_driver);
> > > +}
> > > +
> > > +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
> > > *dev,
> > > +struct drm_encoder *encoder)
> > > +{
> > > +struct msm_drm_private *priv;
> > > +int ret;
> > > +
> > > +if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
> > > +return -EINVAL;
> > > +
> > > +priv = dev->dev_private;
> > > +dp_display->drm_dev = dev;
> > > +
> > > +ret = dp_display_request_irq(dp_display);
> > > +if (ret) {
> > > +DRM_ERROR("request_irq failed, ret=%d\n", ret);
> > > +return ret;
> > > +}
> > > +
> > > +dp_display->encoder = encoder;
> > > +
> > > +dp_display->connector = dp_drm_connector_init(dp_display);
> > > +if (IS_ERR(dp_display->connector)) {
> > > +ret = PTR_ERR(dp_display->connector);
> > > +DRM_DEV_ERROR(dev->dev,
> > > +"failed to create dp connector: %d\n", ret);
> > > +dp_display->connector = NULL;
> > > +return ret;
> > > +}
> > > +
> > > +priv->connectors[priv->num_connectors++] = dp_display->connector;
> > > +return 0;
> > > +}
> > > +
> > > +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
> > > *encoder)
> > > +{
> > > +int rc = 0;
> > > +struct dp_display_private *dp_display;
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +if (!dp_display->dp_mode.drm_mode.clock) {
> > > +DRM_ERROR("invalid params\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +rc = dp_display_set_mode(dp, &dp_display->dp_mode);
> > > +if (rc) {
> > > +DRM_ERROR("Failed to perform a mode set, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_display_prepare(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display prepare failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_display_enable(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display enable failed, rc=%d\n", rc);
> > > +dp_display_unprepare(dp);
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_display_post_enable(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display post enable failed, rc=%d\n", rc);
> > > +dp_display_disable(dp);
> > > +dp_display_unprepare(dp);
> > > +}
> > > +return rc;
> > > +}
> > > +
> > > +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
> > > *encoder)
> > > +{
> > > +int rc = 0;
> > > +
> > > +rc = dp_display_pre_disable(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display pre disable failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_display_disable(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display disable failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_display_unprepare(dp);
> > > +if (rc) {
> > > +DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
> > > +}
> > > +return rc;
> > > +}
> > > +
> > > +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
> > > *encoder,
> > > +struct drm_display_mode *mode,
> > > +struct drm_display_mode *adjusted_mode)
> > > +{
> > > +struct dp_display_private *dp_display;
> > > +
> > > +dp_display = container_of(dp, struct dp_display_private, dp_display);
> > > +
> > > +memset(&dp_display->dp_mode, 0x0, sizeof(struct dp_display_mode));
> > > +
> > > +if (dp_display_check_video_test(dp))
> > > +dp_display->dp_mode.bpp = dp_display_get_test_bpp(dp);
> > > +else /* Default num_components per pixel = 3 */
> > > +dp_display->dp_mode.bpp = dp->connector->display_info.bpc * 3;
> > > +
> > > +if (!dp_display->dp_mode.bpp)
> > > +dp_display->dp_mode.bpp = 24; /* Default bpp */
> > > +
> > > +drm_mode_copy(&dp_display->dp_mode.drm_mode, adjusted_mode);
> > > +
> > > +dp_display->dp_mode.v_active_low =
> > > +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NVSYNC);
> > > +
> > > +dp_display->dp_mode.h_active_low =
> > > +!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_display.h
> > > b/drivers/gpu/drm/msm/dp/dp_display.h
> > > new file mode 100644
> > > index 0000000..c916408
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> > > @@ -0,0 +1,29 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_DISPLAY_H_
> > > +#define _DP_DISPLAY_H_
> > > +
> > > +#include <drm/drmP.h>
> > > +
> > > +#include "dp_panel.h"
> > > +
> > > +struct msm_dp {
> > > +struct drm_device *drm_dev;
> > > +struct drm_connector *connector;
> > > +struct drm_encoder *encoder;
> > > +bool is_connected;
> > > +struct mutex connect_mutex;
> > > +u32 max_pclk_khz;
> > > +};
> > > +
> > > +int dp_display_validate_mode(struct msm_dp *dp_display, u32
> > > mode_pclk_khz);
> > > +int dp_display_get_modes(struct msm_dp *dp_display,
> > > +struct dp_display_mode *dp_mode);
> > > +int dp_display_request_irq(struct msm_dp *dp_display);
> > > +bool dp_display_check_video_test(struct msm_dp *dp_display);
> > > +int dp_display_get_test_bpp(struct msm_dp *dp_display);
> > > +
> > > +#endif /* _DP_DISPLAY_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c
> > > b/drivers/gpu/drm/msm/dp/dp_drm.c
> > > new file mode 100644
> > > index 0000000..a72b0bb
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> > > @@ -0,0 +1,173 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp]: %s: " fmt, __func__
> > > +
> > > +#include <drm/drm_atomic_helper.h>
> > > +#include <drm/drm_atomic.h>
> > > +#include <drm/drm_crtc.h>
> > > +
> > > +#include "msm_drv.h"
> > > +#include "msm_kms.h"
> > > +#include "dp_drm.h"
> > > +
> > > +struct dp_connector {
> > > +struct drm_connector base;
> > > +struct msm_dp *dp_display;
> > > +};
> > > +#define to_dp_connector(x) container_of(x, struct dp_connector, base)
> > > +
> > > +/**
> > > + * dp_connector_detect - callback to determine if connector is
> > > connected
> > > + * @connector: Pointer to drm connector structure
> > > + * @force: Force detect setting from drm framework
> > > + * Returns: Connector 'is connected' status
> > > + */
> > > +static enum drm_connector_status dp_connector_detect(struct
> > > drm_connector *conn,
> > > +bool force)
> > > +{
> > > +struct msm_dp *dp;
> > > +
> > > +dp = to_dp_connector(conn)->dp_display;
> > > +
> > > +DRM_DEBUG_DP("is_connected = %s\n",
> > > +(dp->is_connected) ? "true" : "false");
> > > +
> > > +return (dp->is_connected) ? connector_status_connected :
> > > +connector_status_disconnected;
> > > +}
> > > +
> > > +/**
> > > + * dp_connector_get_modes - callback to add drm modes via
> > > drm_mode_probed_add()
> > > + * @connector: Pointer to drm connector structure
> > > + * Returns: Number of modes added
> > > + */
> > > +static int dp_connector_get_modes(struct drm_connector *connector)
> > > +{
> > > +int rc = 0;
> > > +struct msm_dp *dp;
> > > +struct dp_display_mode *dp_mode = NULL;
> > > +struct drm_display_mode *m, drm_mode;
> > > +
> > > +if (!connector)
> > > +return 0;
> > > +
> > > +dp = to_dp_connector(connector)->dp_display;
> > > +
> > > +dp_mode = kzalloc(sizeof(*dp_mode),  GFP_KERNEL);
> > > +if (!dp_mode)
> > > +return 0;
> > > +
> > > +mutex_lock(&dp->connect_mutex);
> > > +/* pluggable case assumes EDID is read when HPD */
> > > +if (dp->is_connected) {
> > > +/*
> > > + *The get_modes() function might return one mode that is stored
> > > + * in dp_mode when compliance test is in progress. If not, the
> > > + * return value is equal to the total number of modes supported
> > > + * by the sink
> > > + */
> > > +rc = dp_display_get_modes(dp, dp_mode);
> > > +if (rc <= 0) {
> > > +DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc);
> > > +mutex_unlock(&dp->connect_mutex);
> > > +return rc;
> > > +}
> > > +if (dp_mode->drm_mode.clock) { /* valid DP mode */
> > > +memset(&drm_mode, 0x0, sizeof(drm_mode));
> > > +drm_mode_copy(&drm_mode, &dp_mode->drm_mode);
> > > +m = drm_mode_duplicate(connector->dev, &drm_mode);
> > > +if (!m) {
> > > +DRM_ERROR("failed to add mode %ux%u\n",
> > > +       drm_mode.hdisplay,
> > > +       drm_mode.vdisplay);
> > > +kfree(dp_mode);
> > > +mutex_unlock(&dp->connect_mutex);
> > > +return 0;
> > > +}
> > > +drm_mode_probed_add(connector, m);
> > > +}
> > > +} else {
> > > +DRM_DEBUG_DP("No sink connected\n");
> > > +}
> > > +mutex_unlock(&dp->connect_mutex);
> > > +kfree(dp_mode);
> > > +return rc;
> > > +}
> > > +
> > > +/**
> > > + * dp_connector_mode_valid - callback to determine if specified mode
> > > is valid
> > > + * @connector: Pointer to drm connector structure
> > > + * @mode: Pointer to drm mode structure
> > > + * Returns: Validity status for specified mode
> > > + */
> > > +static enum drm_mode_status dp_connector_mode_valid(struct
> > > drm_connector *connector,
> > > +struct drm_display_mode *mode)
> > > +{
> > > +struct msm_dp *dp_disp;
> > > +
> > > +if (!mode || !connector) {
> > > +DRM_ERROR("invalid params\n");
> > > +return MODE_ERROR;
> > > +}
> > > +
> > > +dp_disp = to_dp_connector(connector)->dp_display;
> > > +
> > > +mode->vrefresh = drm_mode_vrefresh(mode);
> > > +
> > > +if ((dp_disp->max_pclk_khz <= 0) ||
> > > +(dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
> > > +(mode->clock > dp_disp->max_pclk_khz))
> > > +return MODE_BAD;
> > > +
> > > +return dp_display_validate_mode(dp_disp, mode->clock);
> > > +}
> > > +
> > > +static const struct drm_connector_funcs dp_connector_funcs = {
> > > +.detect = dp_connector_detect,
> > > +.fill_modes = drm_helper_probe_single_connector_modes,
> > > +.destroy = drm_connector_cleanup,
> > > +.reset = drm_atomic_helper_connector_reset,
> > > +.atomic_duplicate_state =
> > > drm_atomic_helper_connector_duplicate_state,
> > > +.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > > +};
> > > +
> > > +static const struct drm_connector_helper_funcs
> > > dp_connector_helper_funcs = {
> > > +.get_modes = dp_connector_get_modes,
> > > +.mode_valid = dp_connector_mode_valid,
> > > +};
> > > +
> > > +/* connector initialization */
> > > +struct drm_connector *dp_drm_connector_init(struct msm_dp
> > > *dp_display)
> > > +{
> > > +struct drm_connector *connector = NULL;
> > > +struct dp_connector *dp_connector;
> > > +int ret;
> > > +
> > > +dp_connector = devm_kzalloc(dp_display->drm_dev->dev,
> > > sizeof(*dp_connector),
> > > +    GFP_KERNEL);
> > > +if (!dp_connector)
> > > +return ERR_PTR(-ENOMEM);
> > > +
> > > +dp_connector->dp_display = dp_display;
> > > +
> > > +connector = &dp_connector->base;
> > > +
> > > +ret = drm_connector_init(dp_display->drm_dev, connector,
> > > &dp_connector_funcs,
> > > +DRM_MODE_CONNECTOR_DisplayPort);
> > > +if (ret)
> > > +return ERR_PTR(ret);
> > > +
> > > +drm_connector_helper_add(connector, &dp_connector_helper_funcs);
> > > +
> > > +/*
> > > + * Enable HPD to let hpd event is handled when cable is attached to
> > > the host.
> > > + */
> > > +connector->polled = DRM_CONNECTOR_POLL_HPD;
> > > +
> > > +drm_connector_attach_encoder(connector, dp_display->encoder);
> > > +
> > > +return connector;
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h
> > > b/drivers/gpu/drm/msm/dp/dp_drm.h
> > > new file mode 100644
> > > index 0000000..cf472c5
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> > > @@ -0,0 +1,20 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_DRM_H_
> > > +#define _DP_DRM_H_
> > > +
> > > +#include <linux/types.h>
> > > +#include <drm/drmP.h>
> > > +#include <drm/drm_crtc.h>
> > > +#include <drm/drm_crtc_helper.h>
> > > +
> > > +#include "msm_drv.h"
> > > +#include "dp_display.h"
> > > +
> > > +struct drm_connector *dp_drm_connector_init(struct msm_dp
> > > *dp_display);
> > > +
> > > +#endif /* _DP_DRM_H_ */
> > > +
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.c
> > > b/drivers/gpu/drm/msm/dp/dp_extcon.c
> > > new file mode 100644
> > > index 0000000..0fb34ef
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_extcon.c
> > > @@ -0,0 +1,216 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/slab.h>
> > > +#include <linux/device.h>
> > > +#include <linux/extcon.h>
> > > +#include <drm/drmP.h>
> > > +
> > > +#include "dp_extcon.h"
> > > +
> > > +/* DP specific VDM commands */
> > > +#define DP_USBPD_VDM_STATUS0x10
> > > +#define DP_USBPD_VDM_CONFIGURE0x11
> > > +
> > > +/* USBPD-TypeC specific Macros */
> > > +#define VDM_VERSION0x0
> > > +#define USB_C_DP_SID0xFF01
> > > +
> > > +struct dp_extcon_private {
> > > +u32 vdo;
> > > +struct device *dev;
> > > +struct notifier_block extcon_nb;
> > > +struct extcon_dev *extcon;
> > > +struct workqueue_struct *extcon_wq;
> > > +struct work_struct event_work;
> > > +struct usbpd *pd;
> > > +struct dp_usbpd_cb *dp_cb;
> > > +struct dp_usbpd dp_usbpd;
> > > +};
> > > +
> > > +static int dp_extcon_connect(struct dp_usbpd *dp_usbpd, bool hpd)
> > > +{
> > > +int rc = 0;
> > > +struct dp_extcon_private *extcon_priv;
> > > +
> > > +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
> > > dp_usbpd);
> > > +
> > > +dp_usbpd->hpd_high = hpd;
> > > +
> > > +if (!extcon_priv->dp_cb && !extcon_priv->dp_cb->configure
> > > +&& !extcon_priv->dp_cb->disconnect) {
> > > +DRM_ERROR("extcon dp_cb not initialized\n");
> > > +return -EINVAL;
> > > +}
> > > +if (hpd)
> > > +extcon_priv->dp_cb->configure(extcon_priv->dev);
> > > +else
> > > +extcon_priv->dp_cb->disconnect(extcon_priv->dev);
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +static void dp_extcon_event_work(struct work_struct *work)
> > > +{
> > > +struct dp_extcon_private *extcon_priv;
> > > +int dp_state, ret;
> > > +union extcon_property_value property;
> > > +
> > > +extcon_priv = container_of(work,
> > > +struct dp_extcon_private, event_work);
> > > +
> > > +if (!extcon_priv || !extcon_priv->extcon) {
> > > +DRM_ERROR("Invalid extcon device handler\n");
> > > +return;
> > > +}
> > > +
> > > +dp_state = extcon_get_state(extcon_priv->extcon, EXTCON_DISP_DP);
> > > +
> > > +if (dp_state > 0) {
> > > +ret = extcon_get_property(extcon_priv->extcon,
> > > +EXTCON_DISP_DP,
> > > +EXTCON_PROP_USB_TYPEC_POLARITY,
> > > +&property);
> > > +if (ret) {
> > > +DRM_ERROR("Get Polarity property failed\n");
> > > +return;
> > > +}
> > > +extcon_priv->dp_usbpd.orientation =
> > > +(property.intval) ? ORIENTATION_CC2 : ORIENTATION_CC1;
> > > +
> > > +extcon_get_property(extcon_priv->extcon,
> > > +EXTCON_DISP_DP,
> > > +EXTCON_PROP_USB_SS,
> > > +&property);
> > > +extcon_priv->dp_usbpd.multi_func =
> > > +((property.intval) ? true : false);
> > > +
> > > +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, true);
> > > +if (ret) {
> > > +DRM_ERROR("extcon_connect->true failed\n");
> > > +return;
> > > +}
> > > +} else {
> > > +ret = dp_extcon_connect(&extcon_priv->dp_usbpd, false);
> > > +if (ret) {
> > > +DRM_ERROR("extcon_connect->false failed\n");
> > > +return;
> > > +}
> > > +}
> > > +}
> > > +
> > > +static int dp_extcon_event_notify(struct notifier_block *nb,
> > > +  unsigned long event, void *priv)
> > > +{
> > > +struct dp_extcon_private *extcon_priv;
> > > +
> > > +extcon_priv = container_of(nb, struct dp_extcon_private,
> > > +extcon_nb);
> > > +
> > > +queue_work(extcon_priv->extcon_wq, &extcon_priv->event_work);
> > > +return NOTIFY_DONE;
> > > +}
> > > +
> > > +int dp_extcon_register(struct dp_usbpd *dp_usbpd)
> > > +{
> > > +struct dp_extcon_private *extcon_priv;
> > > +int ret = 0;
> > > +
> > > +if (!dp_usbpd)
> > > +return -EINVAL;
> > > +
> > > +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
> > > dp_usbpd);
> > > +
> > > +extcon_priv->extcon_nb.notifier_call = dp_extcon_event_notify;
> > > +ret = devm_extcon_register_notifier(extcon_priv->dev,
> > > extcon_priv->extcon,
> > > +    EXTCON_DISP_DP,
> > > +    &extcon_priv->extcon_nb);
> > > +if (ret) {
> > > +DRM_DEV_ERROR(extcon_priv->dev,
> > > +"register EXTCON_DISP_DP notifier err\n");
> > > +ret = -EINVAL;
> > > +return ret;
> > > +}
> > > +
> > > +extcon_priv->extcon_wq =
> > > create_singlethread_workqueue("drm_dp_extcon");
> > > +if (IS_ERR_OR_NULL(extcon_priv->extcon_wq)) {
> > > +DRM_ERROR("Failed to create workqueue\n");
> > > +dp_extcon_unregister(dp_usbpd);
> > > +return -EPERM;
> > > +}
> > > +
> > > +INIT_WORK(&extcon_priv->event_work, dp_extcon_event_work);
> > > +return ret;
> > > +}
> > > +
> > > +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd)
> > > +{
> > > +struct dp_extcon_private *extcon_priv;
> > > +
> > > +if (!dp_usbpd) {
> > > +DRM_ERROR("Invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +extcon_priv = container_of(dp_usbpd, struct dp_extcon_private,
> > > dp_usbpd);
> > > +
> > > +devm_extcon_unregister_notifier(extcon_priv->dev,
> > > extcon_priv->extcon,
> > > +    EXTCON_DISP_DP,
> > > +    &extcon_priv->extcon_nb);
> > > +
> > > +if (extcon_priv->extcon_wq)
> > > +destroy_workqueue(extcon_priv->extcon_wq);
> > > +
> > > +return;
> > > +}
> > > +
> > > +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
> > > *cb)
> > > +{
> > > +int rc = 0;
> > > +struct dp_extcon_private *dp_extcon;
> > > +struct dp_usbpd *dp_usbpd;
> > > +
> > > +if (!cb) {
> > > +DRM_ERROR("invalid cb data\n");
> > > +rc = -EINVAL;
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +dp_extcon = devm_kzalloc(dev, sizeof(*dp_extcon), GFP_KERNEL);
> > > +if (!dp_extcon) {
> > > +rc = -ENOMEM;
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +dp_extcon->extcon = extcon_get_edev_by_phandle(dev, 0);
> > > +if (!dp_extcon->extcon) {
> > > +DRM_ERROR("invalid extcon data\n");
> > > +rc = -EINVAL;
> > > +devm_kfree(dev, dp_extcon);
> > > +return ERR_PTR(rc);
> > > +        }
> > > +
> > > +dp_extcon->dev = dev;
> > > +dp_extcon->dp_cb = cb;
> > > +
> > > +dp_extcon->dp_usbpd.connect = dp_extcon_connect;
> > > +dp_usbpd = &dp_extcon->dp_usbpd;
> > > +
> > > +return dp_usbpd;
> > > +}
> > > +
> > > +void dp_extcon_put(struct dp_usbpd *dp_usbpd)
> > > +{
> > > +struct dp_extcon_private *extcon;
> > > +
> > > +if (!dp_usbpd)
> > > +return;
> > > +
> > > +extcon = container_of(dp_usbpd, struct dp_extcon_private, dp_usbpd);
> > > +
> > > +devm_kfree(extcon->dev, extcon);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_extcon.h
> > > b/drivers/gpu/drm/msm/dp/dp_extcon.h
> > > new file mode 100644
> > > index 0000000..c6c3051
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_extcon.h
> > > @@ -0,0 +1,84 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_EXTCON_H_
> > > +#define _DP_EXTCON_H_
> > > +
> > > +//#include <linux/usb/usbpd.h>
> > > +
> > > +#include <linux/types.h>
> > > +#include <linux/device.h>
> > > +
> > > +enum plug_orientation {
> > > +ORIENTATION_NONE,
> > > +ORIENTATION_CC1,
> > > +ORIENTATION_CC2,
> > > +};
> > > +
> > > +/**
> > > + * struct dp_usbpd - DisplayPort status
> > > + *
> > > + * @orientation: plug orientation configuration
> > > + * @low_pow_st: low power state
> > > + * @adaptor_dp_en: adaptor functionality enabled
> > > + * @multi_func: multi-function preferred
> > > + * @usb_config_req: request to switch to usb
> > > + * @exit_dp_mode: request exit from displayport mode
> > > + * @hpd_high: Hot Plug Detect signal is high.
> > > + * @hpd_irq: Change in the status since last message
> > > + * @alt_mode_cfg_done: bool to specify alt mode status
> > > + * @debug_en: bool to specify debug mode
> > > + * @connect: simulate disconnect or connect for debug mode
> > > + */
> > > +struct dp_usbpd {
> > > +enum plug_orientation orientation;
> > > +bool low_pow_st;
> > > +bool adaptor_dp_en;
> > > +bool multi_func;
> > > +bool usb_config_req;
> > > +bool exit_dp_mode;
> > > +bool hpd_high;
> > > +bool hpd_irq;
> > > +bool alt_mode_cfg_done;
> > > +bool debug_en;
> > > +
> > > +int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
> > > +};
> > > +
> > > +/**
> > > + * struct dp_usbpd_cb - callback functions provided by the client
> > > + *
> > > + * @configure: called by usbpd module when PD communication has
> > > + * been completed and the usb peripheral has been configured on
> > > + * dp mode.
> > > + * @disconnect: notify the cable disconnect issued by usb.
> > > + * @attention: notify any attention message issued by usb.
> > > + */
> > > +struct dp_usbpd_cb {
> > > +int (*configure)(struct device *dev);
> > > +int (*disconnect)(struct device *dev);
> > > +int (*attention)(struct device *dev);
> > > +};
> > > +
> > > +/**
> > > + * dp_extcon_get() - setup usbpd module
> > > + *
> > > + * @dev: device instance of the caller
> > > + * @cb: struct containing callback function pointers.
> > > + *
> > > + * This function allows the client to initialize the usbpd
> > > + * module. The module will communicate with usb driver and
> > > + * handles the power delivery (PD) communication with the
> > > + * sink/usb device. This module will notify the client using
> > > + * the callback functions about the connection and status.
> > > + */
> > > +struct dp_usbpd *dp_extcon_get(struct device *dev, struct dp_usbpd_cb
> > > *cb);
> > > +
> > > +void dp_extcon_put(struct dp_usbpd *pd);
> > > +
> > > +int dp_extcon_register(struct dp_usbpd *dp_usbpd);
> > > +void dp_extcon_unregister(struct dp_usbpd *dp_usbpd);
> > > +
> > > +#endif /* _DP_EXTCON_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_link.c
> > > b/drivers/gpu/drm/msm/dp/dp_link.c
> > > new file mode 100644
> > > index 0000000..9f5b7bc8
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> > > @@ -0,0 +1,1185 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include "dp_link.h"
> > > +#include "dp_panel.h"
> > > +
> > > +#define DP_TEST_REQUEST_MASK0x7F
> > > +
> > > +enum audio_sample_rate {
> > > +AUDIO_SAMPLE_RATE_32_KHZ= 0x00,
> > > +AUDIO_SAMPLE_RATE_44_1_KHZ= 0x01,
> > > +AUDIO_SAMPLE_RATE_48_KHZ= 0x02,
> > > +AUDIO_SAMPLE_RATE_88_2_KHZ= 0x03,
> > > +AUDIO_SAMPLE_RATE_96_KHZ= 0x04,
> > > +AUDIO_SAMPLE_RATE_176_4_KHZ= 0x05,
> > > +AUDIO_SAMPLE_RATE_192_KHZ= 0x06,
> > > +};
> > > +
> > > +enum audio_pattern_type {
> > > +AUDIO_TEST_PATTERN_OPERATOR_DEFINED= 0x00,
> > > +AUDIO_TEST_PATTERN_SAWTOOTH= 0x01,
> > > +};
> > > +
> > > +struct dp_link_request {
> > > +u32 test_requested;
> > > +u32 test_link_rate;
> > > +u32 test_lane_count;
> > > +};
> > > +
> > > +struct dp_link_private {
> > > +u32 prev_sink_count;
> > > +struct device *dev;
> > > +struct dp_aux *aux;
> > > +struct dp_link dp_link;
> > > +
> > > +struct dp_link_request request;
> > > +struct mutex test_response_mutex;
> > > +struct mutex psm_mutex;
> > > +u8 link_status[DP_LINK_STATUS_SIZE];
> > > +};
> > > +
> > > +static int dp_link_get_period(struct dp_link_private *link, int const
> > > addr)
> > > +{
> > > +int ret = 0;
> > > +u8 data;
> > > +u32 const max_audio_period = 0xA;
> > > +
> > > +/* TEST_AUDIO_PERIOD_CH_XX */
> > > +if (drm_dp_dpcd_readb(link->aux->drm_aux, addr, &data) < 0) {
> > > +DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr);
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +/* Period - Bits 3:0 */
> > > +data = data & 0xF;
> > > +if ((int)data > max_audio_period) {
> > > +DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data);
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +ret = data;
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_link_parse_audio_channel_period(struct dp_link_private
> > > *link)
> > > +{
> > > +int ret = 0;
> > > +struct dp_link_test_audio *req = &link->dp_link.test_audio;
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_1 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_1 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_2 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_2 = 0x%x\n", ret);
> > > +
> > > +/* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_3 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_3 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_4 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_4 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_5 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_5 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_6 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_6 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_7 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_7 = 0x%x\n", ret);
> > > +
> > > +ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8);
> > > +if (ret == -EINVAL)
> > > +goto exit;
> > > +
> > > +req->test_audio_period_ch_8 = ret;
> > > +DRM_DEBUG_DP("test_audio_period_ch_8 = 0x%x\n", ret);
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_link_parse_audio_pattern_type(struct dp_link_private
> > > *link)
> > > +{
> > > +int ret = 0;
> > > +u8 data;
> > > +ssize_t rlen;
> > > +int const max_audio_pattern_type = 0x1;
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> > > +DP_TEST_AUDIO_PATTERN_TYPE, &data);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +/* Audio Pattern Type - Bits 7:0 */
> > > +if ((int)data > max_audio_pattern_type) {
> > > +DRM_ERROR("invalid audio pattern type = 0x%x\n", data);
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +link->dp_link.test_audio.test_audio_pattern_type = data;
> > > +DRM_DEBUG_DP("audio pattern type = 0x%x\n", data);
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_link_parse_audio_mode(struct dp_link_private *link)
> > > +{
> > > +int ret = 0;
> > > +u8 data;
> > > +ssize_t rlen;
> > > +int const max_audio_sampling_rate = 0x6;
> > > +int const max_audio_channel_count = 0x8;
> > > +int sampling_rate = 0x0;
> > > +int channel_count = 0x0;
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_AUDIO_MODE,
> > > &data);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +/* Sampling Rate - Bits 3:0 */
> > > +sampling_rate = data & 0xF;
> > > +if (sampling_rate > max_audio_sampling_rate) {
> > > +DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n",
> > > +sampling_rate, max_audio_sampling_rate);
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +/* Channel Count - Bits 7:4 */
> > > +channel_count = ((data & 0xF0) >> 4) + 1;
> > > +if (channel_count > max_audio_channel_count) {
> > > +DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n",
> > > +channel_count, max_audio_channel_count);
> > > +ret = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate;
> > > +link->dp_link.test_audio.test_audio_channel_count = channel_count;
> > > +DRM_DEBUG_DP("sampling_rate = 0x%x, channel_count = 0x%x\n",
> > > +sampling_rate, channel_count);
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +/**
> > > + * dp_parse_audio_pattern_params() - parses audio pattern parameters
> > > from DPCD
> > > + * @link: Display Port Driver data
> > > + *
> > > + * Returns 0 if it successfully parses the audio link pattern
> > > parameters.
> > > + */
> > > +static int dp_link_parse_audio_pattern_params(struct dp_link_private
> > > *link)
> > > +{
> > > +int ret = 0;
> > > +
> > > +ret = dp_link_parse_audio_mode(link);
> > > +if (ret)
> > > +goto exit;
> > > +
> > > +ret = dp_link_parse_audio_pattern_type(link);
> > > +if (ret)
> > > +goto exit;
> > > +
> > > +ret = dp_link_parse_audio_channel_period(link);
> > > +
> > > +exit:
> > > +return ret;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_is_video_pattern_valid() - validates the video pattern
> > > + * @pattern: video pattern requested by the sink
> > > + *
> > > + * Returns true if the requested video pattern is supported.
> > > + */
> > > +static bool dp_link_is_video_pattern_valid(u32 pattern)
> > > +{
> > > +switch (pattern) {
> > > +case DP_NO_TEST_PATTERN:
> > > +case DP_COLOR_RAMP:
> > > +case DP_BLACK_AND_WHITE_VERTICAL_LINES:
> > > +case DP_COLOR_SQUARE:
> > > +return true;
> > > +default:
> > > +return false;
> > > +}
> > > +}
> > > +
> > > +/**
> > > + * dp_link_is_bit_depth_valid() - validates the bit depth requested
> > > + * @bit_depth: bit depth requested by the sink
> > > + *
> > > + * Returns true if the requested bit depth is supported.
> > > + */
> > > +static bool dp_link_is_bit_depth_valid(u32 tbd)
> > > +{
> > > +/* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */
> > > +switch (tbd) {
> > > +case DP_TEST_BIT_DEPTH_6:
> > > +case DP_TEST_BIT_DEPTH_8:
> > > +case DP_TEST_BIT_DEPTH_10:
> > > +return true;
> > > +default:
> > > +return false;
> > > +}
> > > +}
> > > +
> > > +static int dp_link_parse_timing_params1(struct dp_link_private *link,
> > > +int addr, int len, u32 *val)
> > > +{
> > > +u8 bp[2];
> > > +int rlen;
> > > +
> > > +if (len != 2)
> > > +return -EINVAL;
> > > +
> > > +/* Read the requested video link pattern (Byte 0x221). */
> > > +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> > > +if (rlen < len) {
> > > +DRM_ERROR("failed to read 0x%x\n", addr);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +*val = bp[1] | (bp[0] << 8);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_link_parse_timing_params2(struct dp_link_private *link,
> > > +int addr, int len,
> > > +u32 *val1, u32 *val2)
> > > +{
> > > +u8 bp[2];
> > > +int rlen;
> > > +
> > > +if (len != 2)
> > > +return -EINVAL;
> > > +
> > > +/* Read the requested video link pattern (Byte 0x221). */
> > > +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, bp, len);
> > > +if (rlen < len) {
> > > +DRM_ERROR("failed to read 0x%x\n", addr);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +*val1 = (bp[0] & BIT(7)) >> 7;
> > > +*val2 = bp[1] | ((bp[0] & 0x7F) << 8);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_link_parse_timing_params3(struct dp_link_private *link,
> > > +int addr, u32 *val)
> > > +{
> > > +u8 bp;
> > > +u32 len = 1;
> > > +int rlen;
> > > +
> > > +rlen = drm_dp_dpcd_read(link->aux->drm_aux, addr, &bp, len);
> > > +if (rlen < 1) {
> > > +DRM_ERROR("failed to read 0x%x\n", addr);
> > > +return -EINVAL;
> > > +}
> > > +*val = bp;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +/**
> > > + * dp_parse_video_pattern_params() - parses video pattern parameters
> > > from DPCD
> > > + * @link: Display Port Driver data
> > > + *
> > > + * Returns 0 if it successfully parses the video link pattern and the
> > > link
> > > + * bit depth requested by the sink and, and if the values parsed are
> > > valid.
> > > + */
> > > +static int dp_link_parse_video_pattern_params(struct dp_link_private
> > > *link)
> > > +{
> > > +int ret = 0;
> > > +ssize_t rlen;
> > > +u8 bp;
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PATTERN, &bp);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read link video pattern. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +if (!dp_link_is_video_pattern_valid(bp)) {
> > > +DRM_ERROR("invalid link video pattern = 0x%x\n", bp);
> > > +ret = -EINVAL;
> > > +return ret;
> > > +}
> > > +
> > > +link->dp_link.test_video.test_video_pattern = bp;
> > > +
> > > +/* Read the requested color bit depth and dynamic range (Byte 0x232)
> > > */
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_MISC0, &bp);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +/* Dynamic Range */
> > > +link->dp_link.test_video.test_dyn_range = (bp &
> > > DP_TEST_DYNAMIC_RANGE_CEA);
> > > +
> > > +/* Color bit depth */
> > > +bp &= DP_TEST_BIT_DEPTH_MASK;
> > > +if (!dp_link_is_bit_depth_valid(bp)) {
> > > +DRM_ERROR("invalid link bit depth = 0x%x\n", bp);
> > > +ret = -EINVAL;
> > > +return ret;
> > > +}
> > > +
> > > +link->dp_link.test_video.test_bit_depth = bp;
> > > +
> > > +/* resolution timing params */
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2,
> > > +&link->dp_link.test_video.test_h_total);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_h_total (DP_TEST_H_TOTAL_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2,
> > > +&link->dp_link.test_video.test_v_total);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_v_total (DP_TEST_V_TOTAL_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2,
> > > +&link->dp_link.test_video.test_h_start);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_h_start (DP_TEST_H_START_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2,
> > > +&link->dp_link.test_video.test_v_start);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_v_start (DP_TEST_V_START_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2,
> > > +&link->dp_link.test_video.test_hsync_pol,
> > > +&link->dp_link.test_video.test_hsync_width);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2,
> > > +&link->dp_link.test_video.test_vsync_pol,
> > > +&link->dp_link.test_video.test_vsync_width);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2,
> > > +&link->dp_link.test_video.test_h_width);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_h_width (DP_TEST_H_WIDTH_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2,
> > > +&link->dp_link.test_video.test_v_height);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_v_height (DP_TEST_V_HEIGHT_HI)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1,
> > > +&link->dp_link.test_video.test_rr_d);
> > > +link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR;
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n");
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_parse_timing_params3(link,
> > > DP_TEST_REFRESH_RATE_NUMERATOR,
> > > +&link->dp_link.test_video.test_rr_n);
> > > +if (ret) {
> > > +DRM_ERROR("failed to parse test_rr_n
> > > (DP_TEST_REFRESH_RATE_NUMERATOR)\n");
> > > +return ret;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("link video pattern = 0x%x\n" \
> > > +"link dynamic range = 0x%x\n" \
> > > +"link bit depth = 0x%x\n" \
> > > +"TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" \
> > > +"TEST_H_START = %d, TEST_V_START = %d\n" \
> > > +"TEST_HSYNC_POL = %d\n" \
> > > +"TEST_HSYNC_WIDTH = %d\n" \
> > > +"TEST_VSYNC_POL = %d\n" \
> > > +"TEST_VSYNC_WIDTH = %d\n" \
> > > +"TEST_H_WIDTH = %d\n" \
> > > +"TEST_V_HEIGHT = %d\n" \
> > > +"TEST_REFRESH_DENOMINATOR = %d\n" \
> > > + "TEST_REFRESH_NUMERATOR = %d\n",
> > > +link->dp_link.test_video.test_video_pattern,
> > > +link->dp_link.test_video.test_dyn_range,
> > > +link->dp_link.test_video.test_bit_depth,
> > > +link->dp_link.test_video.test_h_total,
> > > +link->dp_link.test_video.test_v_total,
> > > +link->dp_link.test_video.test_h_start,
> > > +link->dp_link.test_video.test_v_start,
> > > +link->dp_link.test_video.test_hsync_pol,
> > > +link->dp_link.test_video.test_hsync_width,
> > > +link->dp_link.test_video.test_vsync_pol,
> > > +link->dp_link.test_video.test_vsync_width,
> > > +link->dp_link.test_video.test_h_width,
> > > +link->dp_link.test_video.test_v_height,
> > > +link->dp_link.test_video.test_rr_d,
> > > +link->dp_link.test_video.test_rr_n);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_parse_link_training_params() - parses link training
> > > parameters from
> > > + * DPCD
> > > + * @link: Display Port Driver data
> > > + *
> > > + * Returns 0 if it successfully parses the link rate (Byte 0x219) and
> > > lane
> > > + * count (Byte 0x220), and if these values parse are valid.
> > > + */
> > > +static int dp_link_parse_link_training_params(struct dp_link_private
> > > *link)
> > > +{
> > > +u8 bp;
> > > +ssize_t rlen;
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LINK_RATE,&bp);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +if (!is_link_rate_valid(bp)) {
> > > +DRM_ERROR("invalid link rate = 0x%x\n", bp);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link->request.test_link_rate = bp;
> > > +DRM_DEBUG_DP("link rate = 0x%x\n", link->request.test_link_rate);
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_LANE_COUNT,
> > > &bp);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +bp &= DP_MAX_LANE_COUNT_MASK;
> > > +
> > > +if (!is_lane_count_valid(bp)) {
> > > +DRM_ERROR("invalid lane count = 0x%x\n", bp);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link->request.test_lane_count = bp;
> > > +DRM_DEBUG_DP("lane count = 0x%x\n", link->request.test_lane_count);
> > > +return 0;
> > > +}
> > > +
> > > +/**
> > > + * dp_parse_phy_test_params() - parses the phy link parameters
> > > + * @link: Display Port Driver data
> > > + *
> > > + * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is
> > > being
> > > + * requested.
> > > + */
> > > +static int dp_link_parse_phy_test_params(struct dp_link_private
> > > *link)
> > > +{
> > > +u8 data;
> > > +ssize_t rlen;
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_PHY_PATTERN,
> > > &data);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +link->dp_link.phy_params.phy_test_pattern_sel = data;
> > > +
> > > +DRM_DEBUG_DP("phy_test_pattern_sel = 0x%x\n", data);
> > > +
> > > +switch (data) {
> > > +case DP_LINK_QUAL_PATTERN_DISABLE:
> > > +case DP_LINK_QUAL_PATTERN_D10_2:
> > > +case DP_LINK_QUAL_PATTERN_ERROR_RATE:
> > > +case DP_LINK_QUAL_PATTERN_PRBS7:
> > > +case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
> > > +case DP_LINK_QUAL_PATTERN_HBR2_EYE:
> > > +return 0;
> > > +default:
> > > +return -EINVAL;
> > > +}
> > > +}
> > > +
> > > +/**
> > > + * dp_link_is_video_audio_test_requested() - checks for audio/video
> > > link request
> > > + * @link: link requested by the sink
> > > + *
> > > + * Returns true if the requested link is a permitted audio/video
> > > link.
> > > + */
> > > +static bool dp_link_is_video_audio_test_requested(u32 link)
> > > +{
> > > +u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN |
> > > +DP_TEST_LINK_AUDIO_PATTERN |
> > > +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> > > +
> > > +return ((link & video_audio_test) &&
> > > +!(link & ~video_audio_test));
> > > +}
> > > +
> > > +/**
> > > + * dp_link_parse_request() - parses link request parameters from sink
> > > + * @link: Display Port Driver data
> > > + *
> > > + * Parses the DPCD to check if an automated link is requested (Byte
> > > 0x201),
> > > + * and what type of link automation is being requested (Byte 0x218).
> > > + */
> > > +static int dp_link_parse_request(struct dp_link_private *link)
> > > +{
> > > +int ret = 0;
> > > +u8 data;
> > > +ssize_t rlen;
> > > +
> > > +/**
> > > + * Read the device service IRQ vector (Byte 0x201) to determine
> > > + * whether an automated link has been requested by the sink.
> > > + */
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux,
> > > +DP_DEVICE_SERVICE_IRQ_VECTOR, &data);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("device service irq vector = 0x%x\n", data);
> > > +
> > > +if (!(data & DP_AUTOMATED_TEST_REQUEST)) {
> > > +DRM_DEBUG_DP("no test requested\n");
> > > +return 0;
> > > +}
> > > +
> > > +/**
> > > + * Read the link request byte (Byte 0x218) to determine what type
> > > + * of automated link has been requested by the sink.
> > > + */
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_TEST_REQUEST, &data);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("aux read failed. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) {
> > > +DRM_DEBUG_DP("link 0x%x not supported\n", data);
> > > +goto end;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("Test:(0x%x) requested\n", data);
> > > +link->request.test_requested = data;
> > > +
> > > +if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) {
> > > +ret = dp_link_parse_phy_test_params(link);
> > > +if (ret)
> > > +goto end;
> > > +ret = dp_link_parse_link_training_params(link);
> > > +if (ret)
> > > +goto end;
> > > +}
> > > +
> > > +if (link->request.test_requested == DP_TEST_LINK_TRAINING) {
> > > +ret = dp_link_parse_link_training_params(link);
> > > +if (ret)
> > > +goto end;
> > > +}
> > > +
> > > +if (dp_link_is_video_audio_test_requested(
> > > +link->request.test_requested)) {
> > > +ret = dp_link_parse_video_pattern_params(link);
> > > +if (ret)
> > > +goto end;
> > > +
> > > +ret = dp_link_parse_audio_pattern_params(link);
> > > +}
> > > +end:
> > > +/*
> > > + * Send a DP_TEST_ACK if all link parameters are valid, otherwise
> > > send
> > > + * a DP_TEST_NAK.
> > > + */
> > > +if (ret) {
> > > +link->dp_link.test_response = DP_TEST_NAK;
> > > +} else {
> > > +if (link->request.test_requested != DP_TEST_LINK_EDID_READ)
> > > +link->dp_link.test_response = DP_TEST_ACK;
> > > +else
> > > +link->dp_link.test_response =
> > > +DP_TEST_EDID_CHECKSUM_WRITE;
> > > +}
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_parse_sink_count() - parses the sink count
> > > + *
> > > + * Parses the DPCD to check if there is an update to the sink count
> > > + * (Byte 0x200), and whether all the sink devices connected have
> > > Content
> > > + * Protection enabled.
> > > + */
> > > +static int dp_link_parse_sink_count(struct dp_link *dp_link)
> > > +{
> > > +ssize_t rlen;
> > > +bool cp_ready;
> > > +
> > > +struct dp_link_private *link = container_of(dp_link,
> > > +struct dp_link_private, dp_link);
> > > +
> > > +rlen = drm_dp_dpcd_readb(link->aux->drm_aux, DP_SINK_COUNT,
> > > + &link->dp_link.sink_count);
> > > +if (rlen < 0) {
> > > +DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
> > > +return rlen;
> > > +}
> > > +
> > > +cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
> > > +
> > > +link->dp_link.sink_count =
> > > +DP_GET_SINK_COUNT(link->dp_link.sink_count);
> > > +
> > > +DRM_DEBUG_DP("sink_count = 0x%x, cp_ready = 0x%x\n",
> > > +link->dp_link.sink_count, cp_ready);
> > > +return 0;
> > > +}
> > > +
> > > +static void dp_link_parse_sink_status_field(struct dp_link_private
> > > *link)
> > > +{
> > > +int len = 0;
> > > +
> > > +link->prev_sink_count = link->dp_link.sink_count;
> > > +dp_link_parse_sink_count(&link->dp_link);
> > > +
> > > +len = drm_dp_dpcd_read_link_status(link->aux->drm_aux,
> > > +link->link_status);
> > > +if (len < DP_LINK_STATUS_SIZE)
> > > +DRM_ERROR("DP link status read failed\n");
> > > +dp_link_parse_request(link);
> > > +}
> > > +
> > > +/**
> > > + * dp_link_process_link_training_request() - processes new training
> > > requests
> > > + * @link: Display Port link data
> > > + *
> > > + * This function will handle new link training requests that are
> > > initiated by
> > > + * the sink. In particular, it will update the requested lane count
> > > and link
> > > + * link rate, and then trigger the link retraining procedure.
> > > + *
> > > + * The function will return 0 if a link training request has been
> > > processed,
> > > + * otherwise it will return -EINVAL.
> > > + */
> > > +static int dp_link_process_link_training_request(struct
> > > dp_link_private *link)
> > > +{
> > > +if (link->request.test_requested != DP_TEST_LINK_TRAINING)
> > > +return -EINVAL;
> > > +
> > > +DRM_DEBUG_DP("Test:0x%x link rate = 0x%x, lane count = 0x%x\n",
> > > +DP_TEST_LINK_TRAINING,
> > > +link->request.test_link_rate,
> > > +link->request.test_lane_count);
> > > +
> > > +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> > > +link->dp_link.link_params.rate = link->request.test_link_rate;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +bool dp_link_send_test_response(struct dp_link *dp_link)
> > > +{
> > > +struct dp_link_private *link = NULL;
> > > +int ret = 0;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid input\n");
> > > +return false;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +mutex_lock(&link->test_response_mutex);
> > > +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_RESPONSE,
> > > +dp_link->test_response);
> > > +mutex_unlock(&link->test_response_mutex);
> > > +
> > > +return ret == 1;
> > > +}
> > > +
> > > +int dp_link_psm_config(struct dp_link *dp_link,
> > > +      struct drm_dp_link *link_info, bool enable)
> > > +{
> > > +struct dp_link_private *link = NULL;
> > > +int ret = 0;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid params\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +mutex_lock(&link->psm_mutex);
> > > +if (enable)
> > > +ret = drm_dp_link_power_down(link->aux->drm_aux, link_info);
> > > +else
> > > +ret = drm_dp_link_power_up(link->aux->drm_aux, link_info);
> > > +
> > > +if (ret)
> > > +DRM_ERROR("Failed to %s low power mode\n", enable ? "enter" :
> > > "exit");
> > > +else
> > > +dp_link->psm_enabled = enable;
> > > +
> > > +mutex_unlock(&link->psm_mutex);
> > > +return ret;
> > > +}
> > > +
> > > +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum)
> > > +{
> > > +struct dp_link_private *link = NULL;
> > > +int ret = 0;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid input\n");
> > > +return false;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +ret = drm_dp_dpcd_writeb(link->aux->drm_aux, DP_TEST_EDID_CHECKSUM,
> > > checksum);
> > > +return ret == 1;
> > > +}
> > > +
> > > +static int dp_link_parse_vx_px(struct dp_link_private *link)
> > > +{
> > > +int ret = 0;
> > > +
> > > +DRM_DEBUG_DP("vx: 0=%d, 1=%d, 2=%d, 3=%d\n",
> > > +drm_dp_get_adjust_request_voltage(link->link_status, 0),
> > > +drm_dp_get_adjust_request_voltage(link->link_status, 1),
> > > +drm_dp_get_adjust_request_voltage(link->link_status, 2),
> > > +drm_dp_get_adjust_request_voltage(link->link_status, 3));
> > > +
> > > +DRM_DEBUG_DP("px: 0=%d, 1=%d, 2=%d, 3=%d\n",
> > > +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0),
> > > +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1),
> > > +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2),
> > > +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3));
> > > +
> > > +/**
> > > + * Update the voltage and pre-emphasis levels as per DPCD request
> > > + * vector.
> > > + */
> > > +DRM_DEBUG_DP("Current: v_level = 0x%x, p_level = 0x%x\n",
> > > +link->dp_link.phy_params.v_level,
> > > +link->dp_link.phy_params.p_level);
> > > +link->dp_link.phy_params.v_level =
> > > +drm_dp_get_adjust_request_voltage(link->link_status, 0);
> > > +link->dp_link.phy_params.p_level =
> > > +drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0);
> > > +DRM_DEBUG_DP("Requested: v_level = 0x%x, p_level = 0x%x\n",
> > > +link->dp_link.phy_params.v_level,
> > > +link->dp_link.phy_params.p_level);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_process_phy_test_pattern_request() - process new phy link
> > > requests
> > > + * @link: Display Port Driver data
> > > + *
> > > + * This function will handle new phy link pattern requests that are
> > > initiated
> > > + * by the sink. The function will return 0 if a phy link pattern has
> > > been
> > > + * processed, otherwise it will return -EINVAL.
> > > + */
> > > +static int dp_link_process_phy_test_pattern_request(
> > > +struct dp_link_private *link)
> > > +{
> > > +int ret = 0;
> > > +
> > > +if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN))
> > > {
> > > +DRM_DEBUG_DP("no phy test\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +if (!is_link_rate_valid(link->request.test_link_rate) ||
> > > +!is_lane_count_valid(link->request.test_lane_count)) {
> > > +DRM_ERROR("Invalid params: link rate = 0x%x, lane count = 0x%x\n",
> > > +link->request.test_link_rate, link->request.test_lane_count);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("Current: rate = 0x%x, lane count = 0x%x\n",
> > > +link->dp_link.link_params.rate,
> > > +link->dp_link.link_params.num_lanes);
> > > +
> > > +DRM_DEBUG_DP("Requested: rate = 0x%x, lane count = 0x%x\n",
> > > +link->request.test_link_rate, link->request.test_lane_count);
> > > +
> > > +link->dp_link.link_params.num_lanes = link->request.test_lane_count;
> > > +link->dp_link.link_params.rate = link->request.test_link_rate;
> > > +
> > > +ret = dp_link_parse_vx_px(link);
> > > +if (ret)
> > > +  DRM_ERROR("parse_vx_px failed. ret=%d\n", ret);
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE],
> > > int r)
> > > +{
> > > +return link_status[r - DP_LANE0_1_STATUS];
> > > +}
> > > +
> > > +/**
> > > + * dp_link_process_link_status_update() - processes link status
> > > updates
> > > + * @link: Display Port link module data
> > > + *
> > > + * This function will check for changes in the link status, e.g.
> > > clock
> > > + * recovery done on all lanes, and trigger link training if there
> > > is a
> > > + * failure/error on the link.
> > > + *
> > > + * The function will return 0 if the a link status update has been
> > > processed,
> > > + * otherwise it will return -EINVAL.
> > > + */
> > > +static int dp_link_process_link_status_update(struct dp_link_private
> > > *link)
> > > +{
> > > +if (!(get_link_status(link->link_status,
> > > DP_LANE_ALIGN_STATUS_UPDATED) &
> > > +DP_LINK_STATUS_UPDATED) ||
> > > +(drm_dp_clock_recovery_ok(link->link_status,
> > > +link->dp_link.link_params.num_lanes) &&
> > > +drm_dp_channel_eq_ok(link->link_status,
> > > +link->dp_link.link_params.num_lanes)))
> > > +return -EINVAL;
> > > +
> > > +DRM_DEBUG_DP("channel_eq_done = %d, clock_recovery_done = %d\n",
> > > +drm_dp_clock_recovery_ok(link->link_status,
> > > +link->dp_link.link_params.num_lanes),
> > > +drm_dp_clock_recovery_ok(link->link_status,
> > > +link->dp_link.link_params.num_lanes));
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_process_downstream_port_status_change() - process port
> > > status changes
> > > + * @link: Display Port Driver data
> > > + *
> > > + * This function will handle downstream port updates that are
> > > initiated by
> > > + * the sink. If the downstream port status has changed, the EDID is
> > > read via
> > > + * AUX.
> > > + *
> > > + * The function will return 0 if a downstream port update has been
> > > + * processed, otherwise it will return -EINVAL.
> > > + */
> > > +static int dp_link_process_ds_port_status_change(struct
> > > dp_link_private *link)
> > > +{
> > > +if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED)
> > > &
> > > +DP_DOWNSTREAM_PORT_STATUS_CHANGED)
> > > +goto reset;
> > > +
> > > +if (link->prev_sink_count == link->dp_link.sink_count)
> > > +return -EINVAL;
> > > +
> > > +reset:
> > > +/* reset prev_sink_count */
> > > +link->prev_sink_count = link->dp_link.sink_count;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static bool dp_link_is_video_pattern_requested(struct dp_link_private
> > > *link)
> > > +{
> > > +return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN)
> > > +&& !(link->request.test_requested &
> > > +DP_TEST_LINK_AUDIO_DISABLED_VIDEO);
> > > +}
> > > +
> > > +static bool dp_link_is_audio_pattern_requested(struct dp_link_private
> > > *link)
> > > +{
> > > +return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN);
> > > +}
> > > +
> > > +static void dp_link_reset_data(struct dp_link_private *link)
> > > +{
> > > +link->request = (const struct dp_link_request){ 0 };
> > > +link->dp_link.test_video = (const struct dp_link_test_video){ 0 };
> > > +link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN;
> > > +link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 };
> > > +link->dp_link.phy_params.phy_test_pattern_sel = 0;
> > > +link->dp_link.sink_request = 0;
> > > +link->dp_link.test_response = 0;
> > > +}
> > > +
> > > +/**
> > > + * dp_link_process_request() - handle HPD IRQ transition to HIGH
> > > + * @link: pointer to link module data
> > > + *
> > > + * This function will handle the HPD IRQ state transitions from LOW
> > > to
> > > HIGH
> > > + * (including cases when there are back to back HPD IRQ HIGH)
> > > indicating
> > > + * the start of a new link training request or sink status update.
> > > + */
> > > +int dp_link_process_request(struct dp_link *dp_link)
> > > +{
> > > +int ret = 0;
> > > +struct dp_link_private *link;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +mutex_lock(&link->test_response_mutex);
> > > +dp_link_reset_data(link);
> > > +
> > > +dp_link_parse_sink_status_field(link);
> > > +mutex_unlock(&link->test_response_mutex);
> > > +
> > > +if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
> > > +dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_process_ds_port_status_change(link);
> > > +if (!ret) {
> > > +dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_process_link_training_request(link);
> > > +if (!ret) {
> > > +dp_link->sink_request |= DP_TEST_LINK_TRAINING;
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_process_phy_test_pattern_request(link);
> > > +if (!ret) {
> > > +dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
> > > +return ret;
> > > +}
> > > +
> > > +ret = dp_link_process_link_status_update(link);
> > > +if (!ret) {
> > > +dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
> > > +return ret;
> > > +}
> > > +
> > > +if (dp_link_is_video_pattern_requested(link)) {
> > > +dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
> > > +return -EINVAL;
> > > +}
> > > +
> > > +if (dp_link_is_audio_pattern_requested(link)) {
> > > +dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
> > > +return -EINVAL;
> > > +}
> > > +
> > > +return ret;
> > > +}
> > > +
> > > +int dp_link_get_colorimetry_config(struct dp_link *dp_link)
> > > +{
> > > +u32 cc;
> > > +struct dp_link_private *link;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +/*
> > > + * Unless a video pattern CTS test is ongoing, use RGB_VESA
> > > + * Only RGB_VESA and RGB_CEA supported for now
> > > + */
> > > +if (dp_link_is_video_pattern_requested(link))
> > > +cc = link->dp_link.test_video.test_dyn_range;
> > > +else
> > > +cc = DP_TEST_DYNAMIC_RANGE_VESA;
> > > +
> > > +return cc;
> > > +}
> > > +
> > > +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status)
> > > +{
> > > +int i;
> > > +int v_max = 0, p_max = 0;
> > > +struct dp_link_private *link;
> > > +
> > > +if (!dp_link) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +/* use the max level across lanes */
> > > +for (i = 0; i < dp_link->link_params.num_lanes; i++) {
> > > +u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i);
> > > +u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
> > > +DRM_DEBUG_DP("lane=%d req_voltage_swing=%d req_pre_emphasis=%d\n",
> > > +i, data_v, data_p);
> > > +if (v_max < data_v)
> > > +v_max = data_v;
> > > +if (p_max < data_p)
> > > +p_max = data_p;
> > > +}
> > > +
> > > +dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
> > > +dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
> > > +
> > > +/**
> > > + * Adjust the voltage swing and pre-emphasis level combination to
> > > within
> > > + * the allowable range.
> > > + */
> > > +if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) {
> > > +DRM_DEBUG_DP("Requested vSwingLevel=%d, change to %d\n",
> > > +dp_link->phy_params.v_level, DP_TRAIN_VOLTAGE_SWING_MAX);
> > > +dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX;
> > > +}
> > > +
> > > +if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) {
> > > +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> > > +dp_link->phy_params.p_level, DP_TRAIN_PRE_EMPHASIS_MAX);
> > > +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX;
> > > +}
> > > +
> > > +if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1)
> > > +&& (dp_link->phy_params.v_level == DP_TRAIN_VOLTAGE_SWING_LVL_2)) {
> > > +DRM_DEBUG_DP("Requested preEmphasisLevel=%d, change to %d\n",
> > > +dp_link->phy_params.p_level,
> > > +DP_TRAIN_PRE_EMPHASIS_LVL_1);
> > > +dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("adjusted: v_level=%d, p_level=%d\n",
> > > +dp_link->phy_params.v_level, dp_link->phy_params.p_level);
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp)
> > > +{
> > > +u32 tbd;
> > > +
> > > +/*
> > > + * Few simplistic rules and assumptions made here:
> > > + *    1. Test bit depth is bit depth per color component
> > > + *    2. Assume 3 color components
> > > + */
> > > +switch (bpp) {
> > > +case 18:
> > > +tbd = DP_TEST_BIT_DEPTH_6;
> > > +break;
> > > +case 24:
> > > +tbd = DP_TEST_BIT_DEPTH_8;
> > > +break;
> > > +case 30:
> > > +tbd = DP_TEST_BIT_DEPTH_10;
> > > +break;
> > > +default:
> > > +tbd = DP_TEST_BIT_DEPTH_UNKNOWN;
> > > +break;
> > > +}
> > > +
> > > +if (tbd != DP_TEST_BIT_DEPTH_UNKNOWN)
> > > +tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT);
> > > +
> > > +return tbd;
> > > +}
> > > +
> > > +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux)
> > > +{
> > > +int rc = 0;
> > > +struct dp_link_private *link;
> > > +struct dp_link *dp_link;
> > > +
> > > +if (!dev || !aux) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
> > > +if (!link) {
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +link->dev   = dev;
> > > +link->aux   = aux;
> > > +
> > > +mutex_init(&link->test_response_mutex);
> > > +mutex_init(&link->psm_mutex);
> > > +dp_link = &link->dp_link;
> > > +
> > > +return dp_link;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_link_put(struct dp_link *dp_link)
> > > +{
> > > +struct dp_link_private *link;
> > > +
> > > +if (!dp_link)
> > > +return;
> > > +
> > > +link = container_of(dp_link, struct dp_link_private, dp_link);
> > > +
> > > +devm_kfree(link->dev, link);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_link.h
> > > b/drivers/gpu/drm/msm/dp/dp_link.h
> > > new file mode 100644
> > > index 0000000..607904b
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_link.h
> > > @@ -0,0 +1,132 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_LINK_H_
> > > +#define _DP_LINK_H_
> > > +
> > > +#include "dp_aux.h"
> > > +
> > > +#define DS_PORT_STATUS_CHANGED 0x200
> > > +#define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
> > > +
> > > +enum dp_link_voltage_level {
> > > +DP_TRAIN_VOLTAGE_SWING_LVL_0= 0,
> > > +DP_TRAIN_VOLTAGE_SWING_LVL_1= 1,
> > > +DP_TRAIN_VOLTAGE_SWING_LVL_2= 2,
> > > +DP_TRAIN_VOLTAGE_SWING_MAX= DP_TRAIN_VOLTAGE_SWING_LVL_2,
> > > +};
> > > +
> > > +enum dp_link_preemaphasis_level {
> > > +DP_TRAIN_PRE_EMPHASIS_LVL_0= 0,
> > > +DP_TRAIN_PRE_EMPHASIS_LVL_1= 1,
> > > +DP_TRAIN_PRE_EMPHASIS_LVL_2= 2,
> > > +DP_TRAIN_PRE_EMPHASIS_MAX= DP_TRAIN_PRE_EMPHASIS_LVL_2,
> > > +};
> > > +
> > > +struct dp_link_test_video {
> > > +u32 test_video_pattern;
> > > +u32 test_bit_depth;
> > > +u32 test_dyn_range;
> > > +u32 test_h_total;
> > > +u32 test_v_total;
> > > +u32 test_h_start;
> > > +u32 test_v_start;
> > > +u32 test_hsync_pol;
> > > +u32 test_hsync_width;
> > > +u32 test_vsync_pol;
> > > +u32 test_vsync_width;
> > > +u32 test_h_width;
> > > +u32 test_v_height;
> > > +u32 test_rr_d;
> > > +u32 test_rr_n;
> > > +};
> > > +
> > > +struct dp_link_test_audio {
> > > +u32 test_audio_sampling_rate;
> > > +u32 test_audio_channel_count;
> > > +u32 test_audio_pattern_type;
> > > +u32 test_audio_period_ch_1;
> > > +u32 test_audio_period_ch_2;
> > > +u32 test_audio_period_ch_3;
> > > +u32 test_audio_period_ch_4;
> > > +u32 test_audio_period_ch_5;
> > > +u32 test_audio_period_ch_6;
> > > +u32 test_audio_period_ch_7;
> > > +u32 test_audio_period_ch_8;
> > > +};
> > > +
> > > +struct dp_link_phy_params {
> > > +u32 phy_test_pattern_sel;
> > > +u8 v_level;
> > > +u8 p_level;
> > > +};
> > > +
> > > +struct dp_link {
> > > +u32 sink_request;
> > > +u32 test_response;
> > > +bool psm_enabled;
> > > +
> > > +u8 sink_count;
> > > +struct dp_link_test_video test_video;
> > > +struct dp_link_test_audio test_audio;
> > > +struct dp_link_phy_params phy_params;
> > > +struct drm_dp_link link_params;
> > > +};
> > > +
> > > +/**
> > > + * mdss_dp_test_bit_depth_to_bpp() - convert test bit depth to bpp
> > > + * @tbd: test bit depth
> > > + *
> > > + * Returns the bits per pixel (bpp) to be used corresponding to the
> > > + * git bit depth value. This function assumes that bit depth has
> > > + * already been validated.
> > > + */
> > > +static inline u32 dp_link_bit_depth_to_bpp(u32 tbd)
> > > +{
> > > +/*
> > > + * Few simplistic rules and assumptions made here:
> > > + *    1. Bit depth is per color component
> > > + *    2. If bit depth is unknown return 0
> > > + *    3. Assume 3 color components
> > > + */
> > > +switch (tbd) {
> > > +case DP_TEST_BIT_DEPTH_6:
> > > +return 18;
> > > +case DP_TEST_BIT_DEPTH_8:
> > > +return 24;
> > > +case DP_TEST_BIT_DEPTH_10:
> > > +return 30;
> > > +case DP_TEST_BIT_DEPTH_UNKNOWN:
> > > +default:
> > > +return 0;
> > > +}
> > > +}
> > > +
> > > +u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp);
> > > +int dp_link_process_request(struct dp_link *dp_link);
> > > +int dp_link_get_colorimetry_config(struct dp_link *dp_link);
> > > +int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status);
> > > +bool dp_link_send_test_response(struct dp_link *dp_link);
> > > +int dp_link_psm_config(struct dp_link *dp_link,
> > > +struct drm_dp_link *link_info, bool enable);
> > > +bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8
> > > checksum);
> > > +
> > > +/**
> > > + * dp_link_get() - get the functionalities of dp test module
> > > + *
> > > + *
> > > + * return: a pointer to dp_link struct
> > > + */
> > > +struct dp_link *dp_link_get(struct device *dev, struct dp_aux *aux);
> > > +
> > > +/**
> > > + * dp_link_put() - releases the dp test module's resources
> > > + *
> > > + * @dp_link: an instance of dp_link module
> > > + *
> > > + */
> > > +void dp_link_put(struct dp_link *dp_link);
> > > +
> > > +#endif /* _DP_LINK_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c
> > > b/drivers/gpu/drm/msm/dp/dp_panel.c
> > > new file mode 100644
> > > index 0000000..a3150f4
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> > > @@ -0,0 +1,450 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include "dp_panel.h"
> > > +
> > > +#include <drm/drm_connector.h>
> > > +#include <drm/drm_edid.h>
> > > +
> > > +#define DP_MAX_DS_PORT_COUNT 1
> > > +
> > > +struct dp_panel_private {
> > > +struct device *dev;
> > > +struct dp_panel dp_panel;
> > > +struct dp_aux *aux;
> > > +struct dp_link *link;
> > > +struct dp_catalog *catalog;
> > > +bool panel_on;
> > > +bool aux_cfg_update_done;
> > > +};
> > > +
> > > +static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> > > +{
> > > +int rc = 0;
> > > +size_t rlen;
> > > +struct dp_panel_private *panel;
> > > +struct drm_dp_link *link_info;
> > > +u8 *dpcd, major = 0, minor = 0;
> > > +u32 dfp_count = 0;
> > > +
> > > +dpcd = dp_panel->dpcd;
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +link_info = &dp_panel->link_info;
> > > +rc = drm_dp_link_probe(panel->aux->drm_aux, link_info);
> > > +if (rc < 0) {
> > > +DRM_ERROR("drm_dp_link_probe call failed: rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +major = (link_info->revision >> 4) & 0x0f;
> > > +minor = link_info->revision & 0x0f;
> > > +DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> > > +DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> > > +DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> > > +
> > > +rlen = drm_dp_dpcd_read(panel->aux->drm_aux, DP_DPCD_REV,
> > > +dpcd, (DP_RECEIVER_CAP_SIZE + 1));
> > > +if (rlen < 0) {
> > > +DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +dfp_count = dpcd[DP_DOWN_STREAM_PORT_COUNT] &
> > > +DP_DOWN_STREAM_PORT_COUNT;
> > > +if (dfp_count > DP_MAX_DS_PORT_COUNT) {
> > > +DRM_ERROR("DS port count %d greater that max (%d) supported\n",
> > > +dfp_count, DP_MAX_DS_PORT_COUNT);
> > > +return -EINVAL;
> > > +}
> > > +return rc;
> > > +}
> > > +
> > > +static u32 dp_panel_get_supported_bpp(struct dp_panel *dp_panel,
> > > +u32 mode_edid_bpp, u32 mode_pclk_khz)
> > > +{
> > > +struct drm_dp_link *link_info;
> > > +const u32 max_supported_bpp = 30, min_supported_bpp = 18;
> > > +u32 bpp = 0, data_rate_khz = 0;
> > > +
> > > +bpp = min_t(u32, mode_edid_bpp, max_supported_bpp);
> > > +
> > > +link_info = &dp_panel->link_info;
> > > +data_rate_khz = link_info->num_lanes * link_info->rate * 8;
> > > +
> > > +while (bpp > min_supported_bpp) {
> > > +if (mode_pclk_khz * bpp <= data_rate_khz)
> > > +break;
> > > +bpp -= 6;
> > > +}
> > > +
> > > +return bpp;
> > > +}
> > > +
> > > +static void dp_panel_set_test_mode(struct dp_panel_private *panel,
> > > +struct dp_display_mode *mode)
> > > +{
> > > +struct drm_display_mode *drm_mode = NULL;
> > > +struct dp_link_test_video *test_info = NULL;
> > > +
> > > +drm_mode = &mode->drm_mode;
> > > +test_info = &panel->link->test_video;
> > > +
> > > +drm_mode->hdisplay = test_info->test_h_width;
> > > +drm_mode->hsync_start = drm_mode->hdisplay + test_info->test_h_total
> > > -
> > > +(test_info->test_h_start + test_info->test_h_width);
> > > +drm_mode->hsync_end = drm_mode->hsync_start +
> > > test_info->test_hsync_width;
> > > +drm_mode->htotal = drm_mode->hsync_end + test_info->test_h_start -
> > > +test_info->test_hsync_width;
> > > +
> > > +drm_mode->vdisplay = test_info->test_v_height;
> > > +drm_mode->vsync_start = drm_mode->vdisplay + test_info->test_v_total
> > > -
> > > +(test_info->test_v_start + test_info->test_v_height);
> > > +drm_mode->vsync_end = drm_mode->vsync_start +
> > > test_info->test_vsync_width;
> > > +drm_mode->vtotal = drm_mode->vsync_end + test_info->test_v_start -
> > > +test_info->test_vsync_width;
> > > +
> > > +drm_mode->vrefresh = test_info->test_rr_n;
> > > +drm_mode->clock = test_info->test_h_total *
> > > +test_info->test_v_total * drm_mode->vrefresh;
> > > +
> > > +drm_mode->type = 0x48;
> > > +drm_mode_set_name(drm_mode);
> > > +
> > > +if (test_info->test_rr_d == 0)
> > > +drm_mode->clock /= 1000;
> > > +else
> > > +drm_mode->clock /= 1001;
> > > +
> > > +if (test_info->test_h_width == 640)
> > > +drm_mode->clock = 25170;
> > > +}
> > > +
> > > +static int dp_panel_update_modes(struct drm_connector *connector,
> > > +struct edid *edid)
> > > +{
> > > +int rc = 0;
> > > +
> > > +if (edid) {
> > > +rc = drm_connector_update_edid_property(connector, edid);
> > > +if (rc) {
> > > +DRM_ERROR("failed to update edid property %d\n", rc);
> > > +return rc;
> > > +}
> > > +rc = drm_add_edid_modes(connector, edid);
> > > +DRM_DEBUG_DP("%s -", __func__);
> > > +return rc;
> > > +}
> > > +
> > > +rc = drm_connector_update_edid_property(connector, NULL);
> > > +if (rc)
> > > +DRM_ERROR("failed to update edid property %d\n", rc);
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> > > +struct drm_connector *connector)
> > > +{
> > > +int rc = 0, bw_code;
> > > +struct dp_panel_private *panel;
> > > +
> > > +if (!dp_panel || !connector) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +
> > > +rc = dp_panel_read_dpcd(dp_panel);
> > > +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> > > +if (rc || !is_link_rate_valid(bw_code) ||
> > > +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> > > +(bw_code > dp_panel->max_bw_code)) {
> > > +DRM_ERROR("read dpcd failed %d\n", rc);
> > > +return rc;
> > > +}
> > > +rc = drm_dp_read_desc(panel->aux->drm_aux, &dp_panel->desc,
> > > +      drm_dp_is_branch(dp_panel->dpcd));
> > > +if (rc) {
> > > +DRM_ERROR("read sink/branch descriptor failed %d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +
> > > +kfree(dp_panel->edid);
> > > +dp_panel->edid = drm_get_edid(connector,
> > > +      &panel->aux->drm_aux->ddc);
> > > +if (!dp_panel->edid) {
> > > +DRM_ERROR("panel edid read failed\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +if (panel->aux_cfg_update_done) {
> > > +DRM_DEBUG_DP("read DPCD with updated AUX config\n");
> > > +rc = dp_panel_read_dpcd(dp_panel);
> > > +bw_code = drm_dp_link_rate_to_bw_code(dp_panel->link_info.rate);
> > > +if (rc || !is_link_rate_valid(bw_code) ||
> > > +!is_lane_count_valid(dp_panel->link_info.num_lanes) ||
> > > +(bw_code > dp_panel->max_bw_code)) {
> > > +DRM_ERROR("read dpcd failed %d\n", rc);
> > > +return rc;
> > > +}
> > > +panel->aux_cfg_update_done = false;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel,
> > > +u32 mode_edid_bpp, u32 mode_pclk_khz)
> > > +{
> > > +struct dp_panel_private *panel;
> > > +u32 bpp = mode_edid_bpp;
> > > +
> > > +if (!dp_panel || !mode_edid_bpp || !mode_pclk_khz) {
> > > +DRM_ERROR("invalid input\n");
> > > +return 0;
> > > +}
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +
> > > +if (dp_panel->video_test)
> > > +bpp = dp_link_bit_depth_to_bpp(
> > > +panel->link->test_video.test_bit_depth);
> > > +else
> > > +bpp = dp_panel_get_supported_bpp(dp_panel, mode_edid_bpp,
> > > +mode_pclk_khz);
> > > +
> > > +return bpp;
> > > +}
> > > +
> > > +int dp_panel_get_modes(struct dp_panel *dp_panel,
> > > +struct drm_connector *connector, struct dp_display_mode *mode)
> > > +{
> > > +struct dp_panel_private *panel;
> > > +
> > > +if (!dp_panel) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +
> > > +if (dp_panel->video_test) {
> > > +dp_panel_set_test_mode(panel, mode);
> > > +return 1;
> > > +} else if (dp_panel->edid) {
> > > +return dp_panel_update_modes(connector, dp_panel->edid);
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +u8 dp_panel_get_edid_checksum(struct edid *edid)
> > > +{
> > > +struct edid *last_block;
> > > +u8 *raw_edid;
> > > +bool is_edid_corrupt;
> > > +
> > > +if (!edid) {
> > > +DRM_ERROR("invalid edid input\n");
> > > +return 0;
> > > +}
> > > +
> > > +raw_edid = (u8 *)edid;
> > > +raw_edid += (edid->extensions * EDID_LENGTH);
> > > +last_block = (struct edid *)raw_edid;
> > > +
> > > +/* block type extension */
> > > +drm_edid_block_valid(raw_edid, 1, false, &is_edid_corrupt);
> > > +if (!is_edid_corrupt)
> > > +return last_block->checksum;
> > > +
> > > +DRM_ERROR("Invalid block, no checksum\n");
> > > +return 0;
> > > +}
> > > +
> > > +void dp_panel_handle_sink_request(struct dp_panel *dp_panel)
> > > +{
> > > +struct dp_panel_private *panel;
> > > +
> > > +if (!dp_panel) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +
> > > +if (panel->link->sink_request & DP_TEST_LINK_EDID_READ) {
> > > +u8 checksum = dp_panel_get_edid_checksum(dp_panel->edid);
> > > +
> > > +dp_link_send_edid_checksum(panel->link, checksum);
> > > +dp_link_send_test_response(panel->link);
> > > +}
> > > +}
> > > +
> > > +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable)
> > > +{
> > > +struct dp_catalog *catalog;
> > > +struct dp_panel_private *panel;
> > > +
> > > +if (!dp_panel) {
> > > +DRM_ERROR("invalid input\n");
> > > +return;
> > > +}
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +catalog = panel->catalog;
> > > +
> > > +if (!panel->panel_on) {
> > > +DRM_DEBUG_DP("DP panel not enabled, handle TPG on next panel on\n");
> > > +return;
> > > +}
> > > +
> > > +if (!enable) {
> > > +dp_catalog_panel_tpg_disable(catalog);
> > > +return;
> > > +}
> > > +
> > > +DRM_DEBUG_DP("%s: calling catalog tpg_enable\n", __func__);
> > > +dp_catalog_panel_tpg_enable(catalog,
> > > &panel->dp_panel.dp_mode.drm_mode);
> > > +}
> > > +
> > > +int dp_panel_timing_cfg(struct dp_panel *dp_panel)
> > > +{
> > > +int rc = 0;
> > > +u32 data, total_ver, total_hor;
> > > +struct dp_catalog *catalog;
> > > +struct dp_panel_private *panel;
> > > +struct drm_display_mode *drm_mode;
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +catalog = panel->catalog;
> > > +drm_mode = &panel->dp_panel.dp_mode.drm_mode;
> > > +
> > > +DRM_DEBUG_DP("width=%d hporch= %d %d %d\n",
> > > +drm_mode->hdisplay, drm_mode->htotal - drm_mode->hsync_end,
> > > +drm_mode->hsync_start - drm_mode->hdisplay,
> > > +drm_mode->hsync_end - drm_mode->hsync_start);
> > > +
> > > +DRM_DEBUG_DP("height=%d vporch= %d %d %d\n",
> > > +drm_mode->vdisplay, drm_mode->vtotal - drm_mode->vsync_end,
> > > +drm_mode->vsync_start - drm_mode->vdisplay,
> > > +drm_mode->vsync_end - drm_mode->vsync_start);
> > > +
> > > +total_hor = drm_mode->htotal;
> > > +
> > > +total_ver = drm_mode->vtotal;
> > > +
> > > +data = total_ver;
> > > +data <<= 16;
> > > +data |= total_hor;
> > > +
> > > +catalog->total = data;
> > > +
> > > +data = (drm_mode->vtotal - drm_mode->vsync_start);
> > > +data <<= 16;
> > > +data |= (drm_mode->htotal - drm_mode->hsync_start);
> > > +
> > > +catalog->sync_start = data;
> > > +
> > > +data = drm_mode->vsync_end - drm_mode->vsync_start;
> > > +data <<= 16;
> > > +data |= (panel->dp_panel.dp_mode.v_active_low << 31);
> > > +data |= drm_mode->hsync_end - drm_mode->hsync_start;
> > > +data |= (panel->dp_panel.dp_mode.h_active_low << 15);
> > > +
> > > +catalog->width_blanking = data;
> > > +
> > > +data = drm_mode->vdisplay;
> > > +data <<= 16;
> > > +data |= drm_mode->hdisplay;
> > > +
> > > +catalog->dp_active = data;
> > > +
> > > +dp_catalog_panel_timing_cfg(catalog);
> > > +panel->panel_on = true;
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +int dp_panel_init_panel_info(struct dp_panel *dp_panel)
> > > +{
> > > +int rc = 0;
> > > +struct drm_display_mode *drm_mode;
> > > +
> > > +drm_mode = &dp_panel->dp_mode.drm_mode;
> > > +
> > > +/*
> > > + * print resolution info as this is a result
> > > + * of user initiated action of cable connection
> > > + */
> > > +DRM_DEBUG_DP("SET NEW RESOLUTION:\n");
> > > +DRM_DEBUG_DP("%dx%d@%dfps\n", drm_mode->hdisplay,
> > > +drm_mode->vdisplay, drm_mode->vrefresh);
> > > +DRM_DEBUG_DP("h_porches(back|front|width) = (%d|%d|%d)\n",
> > > +drm_mode->htotal - drm_mode->hsync_end,
> > > +drm_mode->hsync_start - drm_mode->hdisplay,
> > > +drm_mode->hsync_end - drm_mode->hsync_start);
> > > +DRM_DEBUG_DP("v_porches(back|front|width) = (%d|%d|%d)\n",
> > > +drm_mode->vtotal - drm_mode->vsync_end,
> > > +drm_mode->vsync_start - drm_mode->vdisplay,
> > > +drm_mode->vsync_end - drm_mode->vsync_start);
> > > +DRM_DEBUG_DP("pixel clock (KHz)=(%d)\n", drm_mode->clock);
> > > +DRM_DEBUG_DP("bpp = %d\n", dp_panel->dp_mode.bpp);
> > > +
> > > +dp_panel->dp_mode.bpp = max_t(u32, 18, min_t(u32,
> > > dp_panel->dp_mode.bpp, 30));
> > > +DRM_DEBUG_DP("updated bpp = %d\n", dp_panel->dp_mode.bpp);
> > > +
> > > +return rc;
> > > +}
> > > +
> > > +struct dp_panel *dp_panel_get(struct dp_panel_in *in)
> > > +{
> > > +int rc = 0;
> > > +struct dp_panel_private *panel;
> > > +struct dp_panel *dp_panel;
> > > +
> > > +if (!in->dev || !in->catalog || !in->aux || !in->link) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +panel = devm_kzalloc(in->dev, sizeof(*panel), GFP_KERNEL);
> > > +if (!panel) {
> > > +rc = -ENOMEM;
> > > +goto error;
> > > +}
> > > +
> > > +panel->dev = in->dev;
> > > +panel->aux = in->aux;
> > > +panel->catalog = in->catalog;
> > > +panel->link = in->link;
> > > +
> > > +dp_panel = &panel->dp_panel;
> > > +dp_panel->max_bw_code = DP_LINK_BW_8_1;
> > > +panel->aux_cfg_update_done = false;
> > > +
> > > +return dp_panel;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_panel_put(struct dp_panel *dp_panel)
> > > +{
> > > +struct dp_panel_private *panel;
> > > +
> > > +if (!dp_panel)
> > > +return;
> > > +
> > > +panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
> > > +
> > > +kfree(dp_panel->edid);
> > > +dp_panel->edid = NULL;
> > > +devm_kfree(panel->dev, panel);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h
> > > b/drivers/gpu/drm/msm/dp/dp_panel.h
> > > new file mode 100644
> > > index 0000000..68c5650
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
> > > @@ -0,0 +1,92 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_PANEL_H_
> > > +#define _DP_PANEL_H_
> > > +
> > > +#include <drm/msm_drm.h>
> > > +
> > > +#include "dp_aux.h"
> > > +#include "dp_link.h"
> > > +#include "dp_extcon.h"
> > > +
> > > +struct edid;
> > > +
> > > +#define DP_MAX_DOWNSTREAM_PORTS 0x10
> > > +
> > > +struct dp_display_mode {
> > > +struct drm_display_mode drm_mode;
> > > +u32 capabilities;
> > > +u32 bpp;
> > > +u32 h_active_low;
> > > +u32 v_active_low;
> > > +};
> > > +
> > > +struct dp_panel_in {
> > > +struct device *dev;
> > > +struct dp_aux *aux;
> > > +struct dp_link *link;
> > > +struct dp_catalog *catalog;
> > > +};
> > > +
> > > +struct dp_panel {
> > > +/* dpcd raw data */
> > > +u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
> > > +
> > > +struct drm_dp_link link_info;
> > > +struct drm_dp_desc desc;
> > > +struct edid *edid;
> > > +struct drm_connector *connector;
> > > +struct dp_display_mode dp_mode;
> > > +bool video_test;
> > > +
> > > +u32 vic;
> > > +u32 max_pclk_khz;
> > > +
> > > +u32 max_bw_code;
> > > +};
> > > +
> > > +int dp_panel_init_panel_info(struct dp_panel *dp_panel);
> > > +int dp_panel_deinit(struct dp_panel *dp_panel);
> > > +int dp_panel_timing_cfg(struct dp_panel *dp_panel);
> > > +int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> > > +struct drm_connector *connector);
> > > +u32 dp_panel_get_mode_bpp(struct dp_panel *dp_panel, u32
> > > mode_max_bpp,
> > > +u32 mode_pclk_khz);
> > > +int dp_panel_get_modes(struct dp_panel *dp_panel,
> > > +struct drm_connector *connector, struct dp_display_mode *mode);
> > > +void dp_panel_handle_sink_request(struct dp_panel *dp_panel);
> > > +void dp_panel_tpg_config(struct dp_panel *dp_panel, bool enable);
> > > +
> > > +/**
> > > + * is_link_rate_valid() - validates the link rate
> > > + * @lane_rate: link rate requested by the sink
> > > + *
> > > + * Returns true if the requested link rate is supported.
> > > + */
> > > +static inline bool is_link_rate_valid(u32 bw_code)
> > > +{
> > > +return (bw_code == DP_LINK_BW_1_62 ||
> > > +bw_code == DP_LINK_BW_2_7 ||
> > > +bw_code == DP_LINK_BW_5_4 ||
> > > +bw_code == DP_LINK_BW_8_1);
> > > +}
> > > +
> > > +/**
> > > + * dp_link_is_lane_count_valid() - validates the lane count
> > > + * @lane_count: lane count requested by the sink
> > > + *
> > > + * Returns true if the requested lane count is supported.
> > > + */
> > > +static inline bool is_lane_count_valid(u32 lane_count)
> > > +{
> > > +return (lane_count == 1 ||
> > > +lane_count == 2 ||
> > > +lane_count == 4);
> > > +}
> > > +
> > > +struct dp_panel *dp_panel_get(struct dp_panel_in *in);
> > > +void dp_panel_put(struct dp_panel *dp_panel);
> > > +#endif /* _DP_PANEL_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
> > > b/drivers/gpu/drm/msm/dp/dp_parser.c
> > > new file mode 100644
> > > index 0000000..3fa2a1f
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> > > @@ -0,0 +1,496 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/of_gpio.h>
> > > +
> > > +#include "dp_parser.h"
> > > +
> > > +static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
> > > +.num = 2,
> > > +.regs = {
> > > +{"vdda-1p2", 21800, 4 },/* 1.2 V */
> > > +{"vdda-0p9", 36000, 32 },/* 0.9 V */
> > > +},
> > > +};
> > > +
> > > +static int msm_dss_ioremap_byname(struct platform_device *pdev,
> > > +   struct dss_io_data *io_data, const char *name)
> > > +{
> > > +struct resource *res = NULL;
> > > +
> > > +if (!io_data) {
> > > +DRM_ERROR("%pS->%s: invalid input\n",
> > > +__builtin_return_address(0), __func__);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
> > > +if (!res) {
> > > +DRM_ERROR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
> > > +__builtin_return_address(0), __func__, name);
> > > +return -ENODEV;
> > > +}
> > > +
> > > +io_data->len = (u32)resource_size(res);
> > > +io_data->base = ioremap(res->start, io_data->len);
> > > +if (!io_data->base) {
> > > +DRM_ERROR("%pS->%s: '%s' ioremap failed\n",
> > > +__builtin_return_address(0), __func__, name);
> > > +return -EIO;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static void msm_dss_iounmap(struct dss_io_data *io_data)
> > > +{
> > > +if (!io_data) {
> > > +DRM_ERROR("%pS->%s: invalid input\n",
> > > +__builtin_return_address(0), __func__);
> > > +return;
> > > +}
> > > +
> > > +if (io_data->base) {
> > > +iounmap(io_data->base);
> > > +io_data->base = NULL;
> > > +}
> > > +io_data->len = 0;
> > > +}
> > > +
> > > +static void dp_parser_unmap_io_resources(struct dp_parser *parser)
> > > +{
> > > +struct dp_io *io = &parser->io;
> > > +
> > > +msm_dss_iounmap(&io->dp_ahb);
> > > +msm_dss_iounmap(&io->dp_aux);
> > > +msm_dss_iounmap(&io->dp_link);
> > > +msm_dss_iounmap(&io->dp_p0);
> > > +msm_dss_iounmap(&io->phy_io);
> > > +msm_dss_iounmap(&io->ln_tx0_io);
> > > +msm_dss_iounmap(&io->ln_tx0_io);
> > > +msm_dss_iounmap(&io->dp_pll_io);
> > > +msm_dss_iounmap(&io->dp_cc_io);
> > > +msm_dss_iounmap(&io->usb3_dp_com);
> > > +msm_dss_iounmap(&io->qfprom_io);
> > > +}
> > > +
> > > +static int dp_parser_ctrl_res(struct dp_parser *parser)
> > > +{
> > > +int rc = 0;
> > > +u32 index;
> > > +struct platform_device *pdev = parser->pdev;
> > > +struct device_node *of_node = parser->pdev->dev.of_node;
> > > +struct dp_io *io = &parser->io;
> > > +
> > > +rc = of_property_read_u32(of_node, "cell-index", &index);
> > > +if (rc) {
> > > +DRM_ERROR("cell-index not specified, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_ahb, "dp_ahb");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_aux, "dp_aux");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_link, "dp_link");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_p0, "dp_p0");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp io resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->phy_io, "dp_phy");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp PHY resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx0_io, "dp_ln_tx0");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp TX0 resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->ln_tx1_io, "dp_ln_tx1");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp TX1 resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_pll_io, "dp_pll");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap DP PLL resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->usb3_dp_com, "usb3_dp_com");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap USB3 DP com resources, rc=%d\n", rc);
> > > +goto err;
> > > +}
> > > +
> > > +rc = msm_dss_ioremap_byname(pdev, &io->dp_cc_io, "dp_mmss_cc");
> > > +if (rc) {
> > > +DRM_ERROR("unable to remap dp MMSS_CC resources\n");
> > > +goto err;
> > > +}
> > > +
> > > +if (msm_dss_ioremap_byname(pdev, &io->qfprom_io, "qfprom_physical"))
> > > +pr_warn("unable to remap dp qfprom resources\n");
> > > +
> > > +return 0;
> > > +err:
> > > +dp_parser_unmap_io_resources(parser);
> > > +return rc;
> > > +}
> > > +
> > > +static const char *dp_get_phy_aux_config_property(u32 cfg_type)
> > > +{
> > > +switch (cfg_type) {
> > > +case PHY_AUX_CFG0:
> > > +return "qcom,aux-cfg0-settings";
> > > +case PHY_AUX_CFG1:
> > > +return "qcom,aux-cfg1-settings";
> > > +case PHY_AUX_CFG2:
> > > +return "qcom,aux-cfg2-settings";
> > > +case PHY_AUX_CFG3:
> > > +return "qcom,aux-cfg3-settings";
> > > +case PHY_AUX_CFG4:
> > > +return "qcom,aux-cfg4-settings";
> > > +case PHY_AUX_CFG5:
> > > +return "qcom,aux-cfg5-settings";
> > > +case PHY_AUX_CFG6:
> > > +return "qcom,aux-cfg6-settings";
> > > +case PHY_AUX_CFG7:
> > > +return "qcom,aux-cfg7-settings";
> > > +case PHY_AUX_CFG8:
> > > +return "qcom,aux-cfg8-settings";
> > > +case PHY_AUX_CFG9:
> > > +return "qcom,aux-cfg9-settings";
> > > +default:
> > > +return "unknown";
> > > +}
> > > +}
> > > +
> > > +static int dp_parser_aux(struct dp_parser *parser)
> > > +{
> > > +struct device_node *of_node = parser->pdev->dev.of_node;
> > > +int len = 0, i = 0, j = 0, config_count = 0;
> > > +const char *data;
> > > +
> > > +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> > > +const char *property = dp_get_phy_aux_config_property(i);
> > > +
> > > +data = of_get_property(of_node, property, &len);
> > > +if (!data) {
> > > +DRM_ERROR("Unable to read %s\n", property);
> > > +goto error;
> > > +}
> > > +
> > > +config_count = len - 1;
> > > +if (config_count < 1 || /* minimum config count = 1 */
> > > +config_count > DP_AUX_CFG_MAX_VALUE_CNT) {
> > > +DRM_ERROR("Invalid config count (%d) configs for %s\n",
> > > +config_count, property);
> > > +goto error;
> > > +}
> > > +
> > > +parser->aux_cfg[i].offset = data[0];
> > > +parser->aux_cfg[i].cfg_cnt = config_count;
> > > +DRM_DEBUG_DP("%s offset=0x%x, cfg_cnt=%d\n",
> > > +property,
> > > +parser->aux_cfg[i].offset,
> > > +parser->aux_cfg[i].cfg_cnt);
> > > +for (j = 1; j < len; j++) {
> > > +parser->aux_cfg[i].lut[j - 1] = data[j];
> > > +DRM_DEBUG_DP("%s lut[%d]=0x%x\n",
> > > +property,
> > > +i,
> > > +parser->aux_cfg[i].lut[j - 1]);
> > > +}
> > > +}
> > > +return 0;
> > > +
> > > +error:
> > > +for (i = 0; i < PHY_AUX_CFG_MAX; i++) {
> > > +parser->aux_cfg[i] = (const struct dp_aux_cfg){ 0 };
> > > +}
> > > +return -EINVAL;
> > > +}
> > > +
> > > +static int dp_parser_misc(struct dp_parser *parser)
> > > +{
> > > +int rc = 0;
> > > +struct device_node *of_node = parser->pdev->dev.of_node;
> > > +
> > > +rc = of_property_read_u32(of_node,
> > > +"qcom,max-pclk-frequency-khz", &parser->max_pclk_khz);
> > > +if (rc)
> > > +parser->max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_parser_pinctrl(struct dp_parser *parser)
> > > +{
> > > +struct dp_pinctrl *pinctrl = &parser->pinctrl;
> > > +
> > > +pinctrl->pin = devm_pinctrl_get(&parser->pdev->dev);
> > > +
> > > +if (IS_ERR_OR_NULL(pinctrl->pin)) {
> > > +DRM_ERROR("failed to get pinctrl, rc=%d\n",
> > > +PTR_ERR_OR_ZERO(pinctrl->pin));
> > > +return -EINVAL;
> > > +}
> > > +
> > > +pinctrl->state_active = pinctrl_lookup_state(pinctrl->pin,
> > > +"mdss_dp_active");
> > > +if (IS_ERR_OR_NULL(pinctrl->state_active)) {
> > > +DRM_ERROR("failed to get pinctrl active state, %d\n",
> > > +PTR_ERR_OR_ZERO(pinctrl->state_active));
> > > +return -EINVAL;
> > > +}
> > > +
> > > +pinctrl->state_suspend = pinctrl_lookup_state(pinctrl->pin,
> > > +"mdss_dp_sleep");
> > > +if (IS_ERR_OR_NULL(pinctrl->state_suspend)) {
> > > +DRM_ERROR("failed to get pinctrl suspend state, %d\n",
> > > +PTR_ERR_OR_ZERO(pinctrl->state_suspend));
> > > +return -EINVAL;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_parser_gpio(struct dp_parser *parser)
> > > +{
> > > +struct device *dev = &parser->pdev->dev;
> > > +struct device_node *of_node = dev->of_node;
> > > +
> > > +parser->usbplug_cc_gpio = of_get_named_gpio(of_node,
> > > "qcom,usbplug-cc-gpio", 0);
> > > +if (!gpio_is_valid(parser->usbplug_cc_gpio)) {
> > > +DRM_ERROR("usbplug-cc-gpio not specified\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +parser->aux_en_gpio = of_get_named_gpio(of_node, "qcom,aux-en-gpio",
> > > 0);
> > > +if (!gpio_is_valid(parser->aux_en_gpio)) {
> > > +DRM_ERROR("aux-en-gpio not specified\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +parser->aux_sel_gpio = of_get_named_gpio(of_node,
> > > "qcom,aux-sel-gpio", 0);
> > > +if (!gpio_is_valid(parser->aux_sel_gpio)) {
> > > +DRM_ERROR("aux-sel-gpio not specified\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static inline bool dp_parser_check_prefix(const char *clk_prefix,
> > > const char *clk_name)
> > > +{
> > > +return !strncmp(clk_prefix, clk_name, strlen(clk_prefix));
> > > +}
> > > +
> > > +static int dp_parser_init_clk_data(struct dp_parser *parser)
> > > +{
> > > +int num_clk = 0, i = 0, rc = 0;
> > > +int core_clk_count = 0, ctrl_clk_count = 0;
> > > +const char *clk_name;
> > > +struct device *dev = &parser->pdev->dev;
> > > +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> > > +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> > > +
> > > +num_clk = of_property_count_strings(dev->of_node, "clock-names");
> > > +if (num_clk <= 0) {
> > > +DRM_ERROR("no clocks are defined\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +for (i = 0; i < num_clk; i++) {
> > > +rc = of_property_read_string_index(dev->of_node,
> > > +"clock-names", i, &clk_name);
> > > +if (rc) {
> > > +DRM_ERROR("error reading clock-names %d\n", rc);
> > > +return rc;
> > > +}
> > > +
> > > +if (dp_parser_check_prefix("core", clk_name))
> > > +core_clk_count++;
> > > +
> > > +if (dp_parser_check_prefix("ctrl", clk_name))
> > > +ctrl_clk_count++;
> > > +}
> > > +
> > > +/* Initialize the CORE power module */
> > > +if (core_clk_count == 0) {
> > > +DRM_ERROR("no core clocks are defined\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +core_power->num_clk = core_clk_count;
> > > +core_power->clk_config = devm_kzalloc(dev,
> > > +sizeof(struct dss_clk) * core_power->num_clk,
> > > +GFP_KERNEL);
> > > +if (!core_power->clk_config) {
> > > +return -EINVAL;
> > > +}
> > > +
> > > +/* Initialize the CTRL power module */
> > > +if (ctrl_clk_count == 0) {
> > > +DRM_ERROR("no ctrl clocks are defined\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +ctrl_power->num_clk = ctrl_clk_count;
> > > +ctrl_power->clk_config = devm_kzalloc(dev,
> > > +sizeof(struct dss_clk) * ctrl_power->num_clk,
> > > +GFP_KERNEL);
> > > +if (!ctrl_power->clk_config) {
> > > +ctrl_power->num_clk = 0;
> > > +return -EINVAL;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_parser_clock(struct dp_parser *parser)
> > > +{
> > > +int rc = 0, i = 0;
> > > +int num_clk = 0;
> > > +int core_clk_index = 0, ctrl_clk_index = 0;
> > > +int core_clk_count = 0, ctrl_clk_count = 0;
> > > +const char *clk_name;
> > > +struct device *dev = &parser->pdev->dev;
> > > +struct dss_module_power *core_power = &parser->mp[DP_CORE_PM];
> > > +struct dss_module_power *ctrl_power = &parser->mp[DP_CTRL_PM];
> > > +
> > > +core_power = &parser->mp[DP_CORE_PM];
> > > +ctrl_power = &parser->mp[DP_CTRL_PM];
> > > +
> > > +rc =  dp_parser_init_clk_data(parser);
> > > +if (rc) {
> > > +DRM_ERROR("failed to initialize power data %d\n", rc);
> > > +return -EINVAL;
> > > +}
> > > +
> > > +core_clk_count = core_power->num_clk;
> > > +ctrl_clk_count = ctrl_power->num_clk;
> > > +
> > > +num_clk = core_clk_count + ctrl_clk_count;
> > > +
> > > +for (i = 0; i < num_clk; i++) {
> > > +rc = of_property_read_string_index(dev->of_node, "clock-names",
> > > +i, &clk_name);
> > > +if (rc) {
> > > + DRM_ERROR("error reading clock-names %d\n", rc);
> > > +return rc;
> > > +}
> > > +if (dp_parser_check_prefix("core", clk_name) &&
> > > +core_clk_index < core_clk_count) {
> > > +struct dss_clk *clk =
> > > +&core_power->clk_config[core_clk_index];
> > > +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> > > +clk->type = DSS_CLK_AHB;
> > > +core_clk_index++;
> > > +} else if (dp_parser_check_prefix("ctrl", clk_name) &&
> > > +   ctrl_clk_index < ctrl_clk_count) {
> > > +struct dss_clk *clk =
> > > +&ctrl_power->clk_config[ctrl_clk_index];
> > > +strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
> > > +ctrl_clk_index++;
> > > +
> > > +if (!strncmp(clk_name, "ctrl_link_clk", strlen("ctrl_link_clk")) ||
> > > +  !strncmp(clk_name, "ctrl_pixel_clk", strlen("ctrl_pixel_clk")))
> > > +clk->type = DSS_CLK_PCLK;
> > > +else
> > > +clk->type = DSS_CLK_AHB;
> > > +}
> > > +}
> > > +
> > > +DRM_DEBUG_DP("clock parsing successful\n");
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_parser_parse(struct dp_parser *parser)
> > > +{
> > > +int rc = 0;
> > > +
> > > +if (!parser) {
> > > +DRM_ERROR("invalid input\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +/* Default: We assume that PHY is shared between USB and DP (Combo
> > > phy) */
> > > +parser->combo_phy_en = true;
> > > +
> > > +rc = dp_parser_ctrl_res(parser);
> > > +if (rc)
> > > +return rc;
> > > +
> > > +rc = dp_parser_aux(parser);
> > > +if (rc)
> > > +return rc;
> > > +
> > > +rc = dp_parser_misc(parser);
> > > +if (rc)
> > > +return rc;
> > > +
> > > +rc = dp_parser_clock(parser);
> > > +if (rc)
> > > +return rc;
> > > +
> > > +/* Map the corresponding regulator information according to
> > > + * version. Currently, since we only have one supported platform,
> > > + * mapping the regulator directly.
> > > + */
> > > +parser->regulator_cfg = &sdm845_dp_reg_cfg;
> > > +
> > > +rc = dp_parser_gpio(parser);
> > > +if (rc) {
> > > +DRM_ERROR("unable to parse GPIOs. Assuming Combo-Phy is
> > > disabled\n");
> > > +parser->combo_phy_en = false;
> > > +return rc;
> > > +}
> > > +
> > > +rc = dp_parser_pinctrl(parser);
> > > +return rc;
> > > +}
> > > +
> > > +struct dp_parser *dp_parser_get(struct platform_device *pdev)
> > > +{
> > > +struct dp_parser *parser;
> > > +
> > > +parser = devm_kzalloc(&pdev->dev, sizeof(*parser), GFP_KERNEL);
> > > +if (!parser)
> > > +return ERR_PTR(-ENOMEM);
> > > +
> > > +parser->parse = dp_parser_parse;
> > > +parser->pdev = pdev;
> > > +
> > > +return parser;
> > > +}
> > > +
> > > +void dp_parser_put(struct dp_parser *parser)
> > > +{
> > > +
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h
> > > b/drivers/gpu/drm/msm/dp/dp_parser.h
> > > new file mode 100644
> > > index 0000000..b606b40
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
> > > @@ -0,0 +1,222 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_PARSER_H_
> > > +#define _DP_PARSER_H_
> > > +
> > > +#define DP_LABEL "MDSS DP DISPLAY"
> > > +#define AUX_CFG_LEN10
> > > +#define DP_MAX_PIXEL_CLK_KHZ675000
> > > +
> > > +enum dp_pm_type {
> > > +DP_CORE_PM,
> > > +DP_CTRL_PM,
> > > +DP_PHY_PM,
> > > +DP_MAX_PM
> > > +};
> > > +
> > > +struct dss_io_data {
> > > +u32 len;
> > > +void __iomem *base;
> > > +};
> > > +
> > > +static inline const char *dp_parser_pm_name(enum dp_pm_type module)
> > > +{
> > > +switch (module) {
> > > +case DP_CORE_PM:return "DP_CORE_PM";
> > > +case DP_CTRL_PM:return "DP_CTRL_PM";
> > > +case DP_PHY_PM:return "DP_PHY_PM";
> > > +default:return "???";
> > > +}
> > > +}
> > > +
> > > +/**
> > > + * struct dp_display_data  - display related device tree data.
> > > + *
> > > + * @ctrl_node: referece to controller device
> > > + * @phy_node:  reference to phy device
> > > + * @is_active: is the controller currently active
> > > + * @name: name of the display
> > > + * @display_type: type of the display
> > > + */
> > > +struct dp_display_data {
> > > +struct device_node *ctrl_node;
> > > +struct device_node *phy_node;
> > > +bool is_active;
> > > +const char *name;
> > > +const char *display_type;
> > > +};
> > > +
> > > +/**
> > > + * struct dp_ctrl_resource - controller's IO related data
> > > + *
> > > + * @dp_ahb: controller's ahb mapped memory address
> > > + * @dp_aux: controller's aux mapped memory address
> > > + * @dp_link: controller's link mapped memory address
> > > + * @dp_p0: controller's p0 mapped memory address
> > > + * @phy_io: phy's mapped memory address
> > > + * @ln_tx0_io: USB-DP lane TX0's mapped memory address
> > > + * @ln_tx1_io: USB-DP lane TX1's mapped memory address
> > > + * @dp_cc_io: DP cc's mapped memory address
> > > + * @qfprom_io: qfprom's mapped memory address
> > > + * @dp_pll_io: DP PLL mapped memory address
> > > + * @usb3_dp_com: USB3 DP PHY combo mapped memory address
> > > + */
> > > +struct dp_io {
> > > +struct dss_io_data ctrl_io;
> > > +struct dss_io_data dp_ahb;
> > > +struct dss_io_data dp_aux;
> > > +struct dss_io_data dp_link;
> > > +struct dss_io_data dp_p0;
> > > +struct dss_io_data phy_io;
> > > +struct dss_io_data ln_tx0_io;
> > > +struct dss_io_data ln_tx1_io;
> > > +struct dss_io_data dp_cc_io;
> > > +struct dss_io_data qfprom_io;
> > > +struct dss_io_data dp_pll_io;
> > > +struct dss_io_data usb3_dp_com;
> > > +};
> > > +
> > > +/**
> > > + * struct dp_pinctrl - DP's pin control
> > > + *
> > > + * @pin: pin-controller's instance
> > > + * @state_active: active state pin control
> > > + * @state_hpd_active: hpd active state pin control
> > > + * @state_suspend: suspend state pin control
> > > + */
> > > +struct dp_pinctrl {
> > > +struct pinctrl *pin;
> > > +struct pinctrl_state *state_active;
> > > +struct pinctrl_state *state_hpd_active;
> > > +struct pinctrl_state *state_suspend;
> > > +};
> > > +
> > > +#define DP_ENUM_STR(x)#x
> > > +#define DP_AUX_CFG_MAX_VALUE_CNT 3
> > > +/**
> > > + * struct dp_aux_cfg - DP's AUX configuration settings
> > > + *
> > > + * @cfg_cnt: count of the configurable settings for the AUX register
> > > + * @current_index: current index of the AUX config lut
> > > + * @offset: register offset of the AUX config register
> > > + * @lut: look up table for the AUX config values for this register
> > > + */
> > > +struct dp_aux_cfg {
> > > +u32 cfg_cnt;
> > > +u32 current_index;
> > > +u32 offset;
> > > +u32 lut[DP_AUX_CFG_MAX_VALUE_CNT];
> > > +};
> > > +
> > > +/* PHY AUX config registers */
> > > +enum dp_phy_aux_config_type {
> > > +PHY_AUX_CFG0,
> > > +PHY_AUX_CFG1,
> > > +PHY_AUX_CFG2,
> > > +PHY_AUX_CFG3,
> > > +PHY_AUX_CFG4,
> > > +PHY_AUX_CFG5,
> > > +PHY_AUX_CFG6,
> > > +PHY_AUX_CFG7,
> > > +PHY_AUX_CFG8,
> > > +PHY_AUX_CFG9,
> > > +PHY_AUX_CFG_MAX,
> > > +};
> > > +
> > > +#define DP_DEV_REGULATOR_MAX4
> > > +
> > > +/* Regulators for DP devices */
> > > +struct dp_reg_entry {
> > > +char name[32];
> > > +int enable_load;
> > > +int disable_load;
> > > +};
> > > +
> > > +struct dp_regulator_cfg {
> > > +int num;
> > > +struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
> > > +};
> > > +
> > > +
> > > +static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
> > > +{
> > > +switch (cfg_type) {
> > > +case PHY_AUX_CFG0:
> > > +return DP_ENUM_STR(PHY_AUX_CFG0);
> > > +case PHY_AUX_CFG1:
> > > +return DP_ENUM_STR(PHY_AUX_CFG1);
> > > +case PHY_AUX_CFG2:
> > > +return DP_ENUM_STR(PHY_AUX_CFG2);
> > > +case PHY_AUX_CFG3:
> > > +return DP_ENUM_STR(PHY_AUX_CFG3);
> > > +case PHY_AUX_CFG4:
> > > +return DP_ENUM_STR(PHY_AUX_CFG4);
> > > +case PHY_AUX_CFG5:
> > > +return DP_ENUM_STR(PHY_AUX_CFG5);
> > > +case PHY_AUX_CFG6:
> > > +return DP_ENUM_STR(PHY_AUX_CFG6);
> > > +case PHY_AUX_CFG7:
> > > +return DP_ENUM_STR(PHY_AUX_CFG7);
> > > +case PHY_AUX_CFG8:
> > > +return DP_ENUM_STR(PHY_AUX_CFG8);
> > > +case PHY_AUX_CFG9:
> > > +return DP_ENUM_STR(PHY_AUX_CFG9);
> > > +default:
> > > +return "unknown";
> > > +}
> > > +}
> > > +
> > > +/**
> > > + * struct dp_parser - DP parser's data exposed to clients
> > > + *
> > > + * @pdev: platform data of the client
> > > + * @mp: gpio, regulator and clock related data
> > > + * @pinctrl: pin-control related data
> > > + * @aux_en_gpio: GPIO to control AUX data when using combo PHY
> > > + * @aux_sel_gpio: GPIO to control plug orientation when using combo
> > > PHY
> > > + * @usbplug_cc_gpio: GPIO to route DP/USB lanes when using combo PHY
> > > + * @combo_phy_en: Boolean to check whether combo PHY is used
> > > + * @disp_data: controller's display related data
> > > + * @parse: function to be called by client to parse device tree.
> > > + */
> > > +struct dp_parser {
> > > +struct platform_device *pdev;
> > > +struct dss_module_power mp[DP_MAX_PM];
> > > +struct dp_pinctrl pinctrl;
> > > +unsigned int aux_en_gpio;
> > > +unsigned int aux_sel_gpio;
> > > +unsigned int usbplug_cc_gpio;
> > > +bool combo_phy_en;
> > > +struct dp_io io;
> > > +struct dp_display_data disp_data;
> > > +const struct dp_regulator_cfg *regulator_cfg;
> > > +u8 l_map[4];
> > > +struct dp_aux_cfg aux_cfg[AUX_CFG_LEN];
> > > +u32 max_pclk_khz;
> > > +
> > > +int (*parse)(struct dp_parser *parser);
> > > +};
> > > +
> > > +/**
> > > + * dp_parser_get() - get the DP's device tree parser module
> > > + *
> > > + * @pdev: platform data of the client
> > > + * return: pointer to dp_parser structure.
> > > + *
> > > + * This function provides client capability to parse the
> > > + * device tree and populate the data structures. The data
> > > + * related to clock, regulators, pin-control and other
> > > + * can be parsed using this module.
> > > + */
> > > +struct dp_parser *dp_parser_get(struct platform_device *pdev);
> > > +
> > > +/**
> > > + * dp_parser_put() - cleans the dp_parser module
> > > + *
> > > + * @parser: pointer to the parser's data.
> > > + */
> > > +void dp_parser_put(struct dp_parser *parser);
> > > +#endif
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_power.c
> > > b/drivers/gpu/drm/msm/dp/dp_power.c
> > > new file mode 100644
> > > index 0000000..3fa4c9b
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> > > @@ -0,0 +1,558 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#define pr_fmt(fmt)"[drm-dp] %s: " fmt, __func__
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/regulator/consumer.h>
> > > +#include <linux/of_gpio.h>
> > > +#include "dp_power.h"
> > > +
> > > +struct dp_power_private {
> > > +struct dp_parser *parser;
> > > +struct platform_device *pdev;
> > > +struct clk *pixel_clk_rcg;
> > > +struct clk *link_clk_src;
> > > +struct clk *pixel_provider;
> > > +struct clk *link_provider;
> > > +struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
> > > +
> > > +struct dp_power dp_power;
> > > +};
> > > +
> > > +static void dp_power_regulator_disable(struct dp_power_private
> > > *power)
> > > +{
> > > +struct regulator_bulk_data *s = power->supplies;
> > > +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> > > +int num = power->parser->regulator_cfg->num;
> > > +int i;
> > > +
> > > +DBG("");
> > > +for (i = num - 1; i >= 0; i--)
> > > +if (regs[i].disable_load >= 0)
> > > +regulator_set_load(s[i].consumer,
> > > +   regs[i].disable_load);
> > > +
> > > +regulator_bulk_disable(num, s);
> > > +}
> > > +
> > > +static int dp_power_regulator_enable(struct dp_power_private *power)
> > > +{
> > > +struct regulator_bulk_data *s = power->supplies;
> > > +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> > > +int num = power->parser->regulator_cfg->num;
> > > +int ret, i;
> > > +
> > > +DBG("");
> > > +for (i = 0; i < num; i++) {
> > > +if (regs[i].enable_load >= 0) {
> > > +ret = regulator_set_load(s[i].consumer,
> > > + regs[i].enable_load);
> > > +if (ret < 0) {
> > > +pr_err("regulator %d set op mode failed, %d\n",
> > > +i, ret);
> > > +goto fail;
> > > +}
> > > +}
> > > +}
> > > +
> > > +ret = regulator_bulk_enable(num, s);
> > > +if (ret < 0) {
> > > +pr_err("regulator enable failed, %d\n", ret);
> > > +goto fail;
> > > +}
> > > +
> > > +return 0;
> > > +
> > > +fail:
> > > +for (i--; i >= 0; i--)
> > > +regulator_set_load(s[i].consumer, regs[i].disable_load);
> > > +return ret;
> > > +}
> > > +
> > > +static int dp_power_regulator_init(struct dp_power_private *power)
> > > +{
> > > +struct regulator_bulk_data *s = power->supplies;
> > > +const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
> > > +struct platform_device *pdev = power->pdev;
> > > +int num = power->parser->regulator_cfg->num;
> > > +int i, ret;
> > > +
> > > +for (i = 0; i < num; i++)
> > > +s[i].supply = regs[i].name;
> > > +
> > > +ret = devm_regulator_bulk_get(&pdev->dev, num, s);
> > > +if (ret < 0) {
> > > +pr_err("%s: failed to init regulator, ret=%d\n",
> > > +__func__, ret);
> > > +return ret;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_power_pinctrl_set(struct dp_power_private *power, bool
> > > active)
> > > +{
> > > +int rc = -EFAULT;
> > > +struct pinctrl_state *pin_state;
> > > +struct dp_parser *parser = power->parser;
> > > +
> > > +if (!parser->combo_phy_en)
> > > +return 0;
> > > +
> > > +pin_state = active ? parser->pinctrl.state_active
> > > +: parser->pinctrl.state_suspend;
> > > +
> > > +rc = pinctrl_select_state(parser->pinctrl.pin, pin_state);
> > > +if (rc) {
> > > +DRM_ERROR("can not set %s pins\n",
> > > +active ? "dp_active" : "dp_sleep");
> > > +return rc;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_power_clk_init(struct dp_power_private *power)
> > > +{
> > > +int rc = 0;
> > > +struct dss_module_power *core, *ctrl;
> > > +struct device *dev = &power->pdev->dev;
> > > +
> > > +core = &power->parser->mp[DP_CORE_PM];
> > > +ctrl = &power->parser->mp[DP_CTRL_PM];
> > > +
> > > +if (power->parser->pll && power->parser->pll->get_provider) {
> > > +rc = power->parser->pll->get_provider(power->parser->pll,
> > > +&power->link_provider, &power->pixel_provider);
> > > +if (rc) {
> > > +pr_info("%s: can't get provider from pll, don't set parent\n",
> > > +__func__);
> > > +return 0;
> > > +}
> > > +}
> > > +
> > > +rc = msm_dss_get_clk(dev, core->clk_config, core->num_clk);
> > > +if (rc) {
> > > +DRM_ERROR("failed to get %s clk. err=%d\n",
> > > +dp_parser_pm_name(DP_CORE_PM), rc);
> > > +return rc;
> > > +}
> > > +
> > > +rc = msm_dss_get_clk(dev, ctrl->clk_config, ctrl->num_clk);
> > > +if (rc) {
> > > +DRM_ERROR("failed to get %s clk. err=%d\n",
> > > +dp_parser_pm_name(DP_CTRL_PM), rc);
> > > +msm_dss_put_clk(core->clk_config, core->num_clk);
> > > +return -ENODEV;
> > > +}
> > > +
> > > +power->pixel_clk_rcg = devm_clk_get(dev, "pixel_clk_rcg");
> > > +if (IS_ERR(power->pixel_clk_rcg)) {
> > > +DRM_DEBUG_DP("Unable to get DP pixel clk RCG\n");
> > > +power->pixel_clk_rcg = NULL;
> > > +msm_dss_put_clk(core->clk_config, core->num_clk);
> > > +return -ENODEV;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_power_clk_deinit(struct dp_power_private *power)
> > > +{
> > > +struct dss_module_power *core, *ctrl;
> > > +
> > > +core = &power->parser->mp[DP_CORE_PM];
> > > +ctrl = &power->parser->mp[DP_CTRL_PM];
> > > +
> > > +if (!core || !ctrl) {
> > > +DRM_ERROR("invalid power_data\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +msm_dss_put_clk(ctrl->clk_config, ctrl->num_clk);
> > > +msm_dss_put_clk(core->clk_config, core->num_clk);
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_power_clk_set_rate(struct dp_power_private *power,
> > > +enum dp_pm_type module, bool enable)
> > > +{
> > > +int rc = 0;
> > > +struct dss_module_power *mp = &power->parser->mp[module];
> > > +
> > > +if (enable) {
> > > +rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> > > +if (rc) {
> > > +DRM_ERROR("failed to set clks rate.\n");
> > > +return rc;
> > > +}
> > > +}
> > > +
> > > +rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
> > > +if (rc) {
> > > +DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
> > > +return rc;
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +int dp_power_clk_enable(struct dp_power *dp_power,
> > > +enum dp_pm_type pm_type, bool enable)
> > > +{
> > > +int rc = 0;
> > > +struct dss_module_power *mp;
> > > +struct dp_power_private *power;
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +mp = &power->parser->mp[pm_type];
> > > +
> > > +if (pm_type != DP_CORE_PM && pm_type != DP_CTRL_PM) {
> > > +DRM_ERROR("unsupported power module: %s\n",
> > > +dp_parser_pm_name(pm_type));
> > > +return -EINVAL;
> > > +}
> > > +
> > > +if (enable) {
> > > +if (pm_type == DP_CORE_PM && dp_power->core_clks_on) {
> > > +DRM_DEBUG_DP("core clks already enabled\n");
> > > +return 0;
> > > +}
> > > +
> > > +if (pm_type == DP_CTRL_PM && dp_power->link_clks_on) {
> > > +DRM_DEBUG_DP("links clks already enabled\n");
> > > +return 0;
> > > +}
> > > +
> > > +if ((pm_type == DP_CTRL_PM) && (!dp_power->core_clks_on)) {
> > > +DRM_DEBUG_DP("Need to enable core clks before link clks\n");
> > > +
> > > +rc = dp_power_clk_set_rate(power, DP_CORE_PM, enable);
> > > +if (rc) {
> > > +DRM_ERROR("failed to enable clks: %s. err=%d\n",
> > > +dp_parser_pm_name(DP_CORE_PM), rc);
> > > +return rc;
> > > +}
> > > +dp_power->core_clks_on = true;
> > > +}
> > > +}
> > > +
> > > +rc = dp_power_clk_set_rate(power, pm_type, enable);
> > > +if (rc) {
> > > +DRM_ERROR("failed to '%s' clks for: %s. err=%d\n",
> > > +enable ? "enable" : "disable",
> > > +dp_parser_pm_name(pm_type), rc);
> > > +return rc;
> > > +}
> > > +
> > > +if (pm_type == DP_CORE_PM)
> > > +dp_power->core_clks_on = enable;
> > > +else
> > > +dp_power->link_clks_on = enable;
> > > +
> > > +DRM_DEBUG_DP("%s clocks for %s\n",
> > > +enable ? "enable" : "disable",
> > > +dp_parser_pm_name(pm_type));
> > > +DRM_DEBUG_DP("link_clks:%s core_clks:%s\n",
> > > +dp_power->link_clks_on ? "on" : "off",
> > > +dp_power->core_clks_on ? "on" : "off");
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static int dp_power_request_gpios(struct dp_power_private *power)
> > > +{
> > > +int rc = 0;
> > > +struct device *dev = &power->pdev->dev;
> > > +struct dp_parser *parser = power->parser;
> > > +
> > > +if (gpio_is_valid(parser->aux_en_gpio)) {
> > > +rc = devm_gpio_request(dev, parser->aux_en_gpio, "aux_enable");
> > > +if (rc) {
> > > +DRM_ERROR("request aux_enable gpio failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +}
> > > +if (gpio_is_valid(parser->aux_sel_gpio)) {
> > > +rc = devm_gpio_request(dev, parser->aux_sel_gpio, "aux_sel");
> > > +if (rc) {
> > > +DRM_ERROR("request aux_sel gpio failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +}
> > > +if (gpio_is_valid(parser->usbplug_cc_gpio)) {
> > > +rc = devm_gpio_request(dev, parser->usbplug_cc_gpio, "usbplug_cc");
> > > +if (rc) {
> > > +DRM_ERROR("request usbplug_cc gpio failed, rc=%d\n", rc);
> > > +return rc;
> > > +}
> > > +}
> > > +return 0;
> > > +}
> > > +
> > > +static void dp_power_set_gpio(struct dp_power_private *power, bool
> > > flip)
> > > +{
> > > +struct dp_parser *parser = power->parser;
> > > +
> > > +if (gpio_is_valid(parser->aux_sel_gpio))
> > > +gpio_direction_output(parser->aux_sel_gpio, flip);
> > > +
> > > +if (gpio_is_valid(parser->aux_en_gpio))
> > > +gpio_direction_output(parser->aux_en_gpio, 0);
> > > +
> > > +if (gpio_is_valid(parser->usbplug_cc_gpio))
> > > +gpio_set_value(parser->usbplug_cc_gpio, 0);
> > > +}
> > > +
> > > +static int dp_power_config_gpios(struct dp_power_private *power, bool
> > > flip)
> > > +{
> > > +int rc = 0;
> > > +struct dp_parser *parser = power->parser;
> > > +
> > > +if (!parser->combo_phy_en)
> > > +return rc;
> > > +
> > > +rc = dp_power_request_gpios(power);
> > > +if (rc) {
> > > +DRM_ERROR("gpio request failed\n");
> > > +return rc;
> > > +}
> > > +
> > > +dp_power_set_gpio(power, flip);
> > > +return 0;
> > > +}
> > > +
> > > +static void dp_power_disable_gpios(struct dp_power_private *power)
> > > +{
> > > +struct dp_parser *parser = power->parser;
> > > +
> > > +if (!parser->combo_phy_en)
> > > +return;
> > > +
> > > +gpio_set_value(parser->aux_sel_gpio, 0);
> > > +gpio_set_value(parser->aux_en_gpio, 0);
> > > +gpio_set_value(parser->usbplug_cc_gpio, 0);
> > > +gpio_free(parser->aux_sel_gpio);
> > > +gpio_free(parser->aux_en_gpio);
> > > +gpio_free(parser->usbplug_cc_gpio);
> > > +}
> > > +
> > > +int dp_power_client_init(struct dp_power *dp_power)
> > > +{
> > > +int rc = 0;
> > > +struct dp_power_private *power;
> > > +
> > > +if (!dp_power) {
> > > +DRM_ERROR("invalid power data\n");
> > > +return -EINVAL;
> > > +}
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +pm_runtime_enable(&power->pdev->dev);
> > > +
> > > +rc = dp_power_regulator_init(power);
> > > +if (rc) {
> > > +DRM_ERROR("failed to init regulators %d\n", rc);
> > > +goto error;
> > > +}
> > > +
> > > +rc = dp_power_clk_init(power);
> > > +if (rc) {
> > > +DRM_ERROR("failed to init clocks %d\n", rc);
> > > +goto error;
> > > +}
> > > +return 0;
> > > +
> > > +error:
> > > +pm_runtime_disable(&power->pdev->dev);
> > > +return rc;
> > > +}
> > > +
> > > +void dp_power_client_deinit(struct dp_power *dp_power)
> > > +{
> > > +struct dp_power_private *power;
> > > +
> > > +if (!dp_power) {
> > > +DRM_ERROR("invalid power data\n");
> > > +return;
> > > +}
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +dp_power_clk_deinit(power);
> > > +pm_runtime_disable(&power->pdev->dev);
> > > +
> > > +}
> > > +
> > > +int dp_power_set_link_clk_parent(struct dp_power *dp_power)
> > > +{
> > > +int rc = 0;
> > > +struct dp_power_private *power;
> > > +u32 num;
> > > +struct dss_clk *cfg;
> > > +char *name = "ctrl_link_clk";
> > > +
> > > +if (!dp_power) {
> > > +DRM_ERROR("invalid power data\n");
> > > +rc = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +num = power->parser->mp[DP_CTRL_PM].num_clk;
> > > +cfg = power->parser->mp[DP_CTRL_PM].clk_config;
> > > +
> > > +while (num && strcmp(cfg->clk_name, name)) {
> > > +num--;
> > > +cfg++;
> > > +}
> > > +
> > > +if (num && power->link_provider) {
> > > +power->link_clk_src = clk_get_parent(cfg->clk);
> > > +if (power->link_clk_src) {
> > > +clk_set_parent(power->link_clk_src, power->link_provider);
> > > +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> > > +__clk_get_name(power->link_provider),
> > > +__clk_get_name(power->link_clk_src));
> > > +} else {
> > > +DRM_ERROR("couldn't get parent for clk=%s\n", name);
> > > +rc = -EINVAL;
> > > +}
> > > +} else {
> > > +DRM_ERROR("%s clock could not be set parent\n", name);
> > > +rc = -EINVAL;
> > > +}
> > > +exit:
> > > +return rc;
> > > +}
> > > +
> > > +int dp_power_set_pixel_clk_parent(struct dp_power *dp_power)
> > > +{
> > > +int rc = 0;
> > > +struct dp_power_private *power;
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +if (power->pixel_clk_rcg && power->pixel_provider) {
> > > +rc = clk_set_parent(power->pixel_clk_rcg, power->pixel_provider);
> > > +if (rc) {
> > > +DRM_ERROR("failed to set parent clk src, %d\n", rc);
> > > +return rc;
> > > +}
> > > +DRM_DEBUG_DP("%s: is the parent of clk=%s\n",
> > > +__clk_get_name(power->pixel_provider),
> > > +__clk_get_name(power->pixel_clk_rcg));
> > > +}
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +int dp_power_init(struct dp_power *dp_power, bool flip)
> > > +{
> > > +int rc = 0;
> > > +struct dp_power_private *power;
> > > +
> > > +if (!dp_power) {
> > > +DRM_ERROR("invalid power data\n");
> > > +rc = -EINVAL;
> > > +goto exit;
> > > +}
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +pm_runtime_get_sync(&power->pdev->dev);
> > > +rc = dp_power_regulator_enable(power);
> > > +if (rc) {
> > > +DRM_ERROR("failed to enable regulators, %d\n", rc);
> > > +goto exit;
> > > +}
> > > +
> > > +rc = dp_power_pinctrl_set(power, true);
> > > +if (rc) {
> > > +DRM_ERROR("failed to set pinctrl state, %d\n", rc);
> > > +goto err_pinctrl;
> > > +}
> > > +
> > > +rc = dp_power_config_gpios(power, flip);
> > > +if (rc) {
> > > +DRM_ERROR("failed to enable gpios, %d\n", rc);
> > > +goto err_gpio;
> > > +}
> > > +
> > > +rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> > > +if (rc) {
> > > +DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
> > > +goto err_clk;
> > > +}
> > > +
> > > +return 0;
> > > +
> > > +err_clk:
> > > +dp_power_disable_gpios(power);
> > > +err_gpio:
> > > +dp_power_pinctrl_set(power, false);
> > > +err_pinctrl:
> > > +dp_power_regulator_disable(power);
> > > +exit:
> > > +pm_runtime_put_sync(&power->pdev->dev);
> > > +return rc;
> > > +}
> > > +
> > > +int dp_power_deinit(struct dp_power *dp_power)
> > > +{
> > > +struct dp_power_private *power;
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> > > +dp_power_disable_gpios(power);
> > > +dp_power_pinctrl_set(power, false);
> > > +dp_power_regulator_disable(power);
> > > +pm_runtime_put_sync(&power->pdev->dev);
> > > +return 0;
> > > +}
> > > +
> > > +struct dp_power *dp_power_get(struct dp_parser *parser)
> > > +{
> > > +int rc = 0;
> > > +struct dp_power_private *power;
> > > +struct dp_power *dp_power;
> > > +
> > > +if (!parser) {
> > > +DRM_ERROR("invalid input\n");
> > > +rc = -EINVAL;
> > > +goto error;
> > > +}
> > > +
> > > +power = devm_kzalloc(&parser->pdev->dev, sizeof(*power), GFP_KERNEL);
> > > +if (!power) {
> > > +rc = -ENOMEM;
> > > +goto error;
> > > +}
> > > +
> > > +power->parser = parser;
> > > +power->pdev = parser->pdev;
> > > +
> > > +dp_power = &power->dp_power;
> > > +
> > > +return dp_power;
> > > +error:
> > > +return ERR_PTR(rc);
> > > +}
> > > +
> > > +void dp_power_put(struct dp_power *dp_power)
> > > +{
> > > +struct dp_power_private *power = NULL;
> > > +
> > > +if (!dp_power)
> > > +return;
> > > +
> > > +power = container_of(dp_power, struct dp_power_private, dp_power);
> > > +
> > > +devm_kfree(&power->pdev->dev, power);
> > > +}
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_power.h
> > > b/drivers/gpu/drm/msm/dp/dp_power.h
> > > new file mode 100644
> > > index 0000000..40d7e73
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_power.h
> > > @@ -0,0 +1,52 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2012-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_POWER_H_
> > > +#define _DP_POWER_H_
> > > +
> > > +#include "dp_parser.h"
> > > +
> > > +/**
> > > + * sruct dp_power - DisplayPort's power related data
> > > + *
> > > + * @init: initializes the regulators/core clocks/GPIOs/pinctrl
> > > + * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
> > > + * @clk_enable: enable/disable the DP clocks
> > > + * @set_link_clk_parent: set the parent of DP link clock
> > > + * @set_pixel_clk_parent: set the parent of DP pixel clock
> > > + */
> > > +struct dp_power {
> > > +bool core_clks_on;
> > > +bool link_clks_on;
> > > +};
> > > +
> > > +int dp_power_init(struct dp_power *power, bool flip);
> > > +int dp_power_deinit(struct dp_power *power);
> > > +int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type
> > > pm_type,
> > > +bool enable);
> > > +int dp_power_set_link_clk_parent(struct dp_power *power);
> > > +int dp_power_set_pixel_clk_parent(struct dp_power *power);
> > > +int dp_power_client_init(struct dp_power *power);
> > > +void dp_power_client_deinit(struct dp_power *power);
> > > +
> > > +/**
> > > + * dp_power_get() - configure and get the DisplayPort power module
> > > data
> > > + *
> > > + * @parser: instance of parser module
> > > + * return: pointer to allocated power module data
> > > + *
> > > + * This API will configure the DisplayPort's power module and
> > > provides
> > > + * methods to be called by the client to configure the power related
> > > + * modueles.
> > > + */
> > > +struct dp_power *dp_power_get(struct dp_parser *parser);
> > > +
> > > +/**
> > > + * dp_power_put() - release the power related resources
> > > + *
> > > + * @power: pointer to the power module's data
> > > + */
> > > +void dp_power_put(struct dp_power *power);
> > > +#endif /* _DP_POWER_H_ */
> > > diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h
> > > b/drivers/gpu/drm/msm/dp/dp_reg.h
> > > new file mode 100644
> > > index 0000000..5468f7b
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
> > > @@ -0,0 +1,488 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2017-2019, The Linux Foundation. All rights
> > > reserved.
> > > + */
> > > +
> > > +#ifndef _DP_REG_H_
> > > +#define _DP_REG_H_
> > > +
> > > +/* DP_TX Registers */
> > > +#define REG_DP_HW_VERSION(0x00000000)
> > > +
> > > +#define REG_DP_SW_RESET(0x00000010)
> > > +#define DP_SW_RESET(0x00000001)
> > > +
> > > +#define REG_DP_PHY_CTRL(0x00000014)
> > > +#define DP_PHY_CTRL_SW_RESET_PLL(0x00000001)
> > > +#define DP_PHY_CTRL_SW_RESET(0x00000004)
> > > +
> > > +#define REG_DP_CLK_CTRL(0x00000018)
> > > +#define REG_DP_CLK_ACTIVE(0x0000001C)
> > > +#define REG_DP_INTR_STATUS(0x00000020)
> > > +#define REG_DP_INTR_STATUS2(0x00000024)
> > > +#define REG_DP_INTR_STATUS3(0x00000028)
> > > +
> > > +#define REG_DP_DP_HPD_CTRL(0x00000000)
> > > +#define DP_DP_HPD_CTRL_HPD_EN(0x00000001)
> > > +
> > > +#define REG_DP_DP_HPD_INT_STATUS(0x00000004)
> > > +
> > > +#define REG_DP_DP_HPD_INT_ACK(0x00000008)
> > > +#define DP_DP_HPD_PLUG_INT_ACK(0x00000001)
> > > +#define DP_DP_IRQ_HPD_INT_ACK(0x00000002)
> > > +#define DP_DP_HPD_REPLUG_INT_ACK(0x00000004)
> > > +#define DP_DP_HPD_UNPLUG_INT_ACK(0x00000008)
> > > +
> > > +#define REG_DP_DP_HPD_INT_MASK(0x0000000C)
> > > +#define DP_DP_HPD_PLUG_INT_MASK(0x00000001)
> > > +#define DP_DP_IRQ_HPD_INT_MASK(0x00000002)
> > > +#define DP_DP_HPD_REPLUG_INT_MASK(0x00000004)
> > > +#define DP_DP_HPD_UNPLUG_INT_MASK(0x00000008)
> > > +
> > > +#define REG_DP_DP_HPD_REFTIMER(0x00000018)
> > > +#define REG_DP_DP_HPD_EVENT_TIME_0(0x0000001C)
> > > +#define REG_DP_DP_HPD_EVENT_TIME_1(0x00000020)
> > > +
> > > +#define REG_DP_AUX_CTRL(0x00000030)
> > > +#define DP_AUX_CTRL_ENABLE(0x00000001)
> > > +#define DP_AUX_CTRL_RESET(0x00000002)
> > > +
> > > +#define REG_DP_AUX_DATA(0x00000034)
> > > +#define DP_AUX_DATA_READ(0x00000001)
> > > +#define DP_AUX_DATA_WRITE(0x00000000)
> > > +#define DP_AUX_DATA_OFFSET(0x00000008)
> > > +#define DP_AUX_DATA_INDEX_OFFSET(0x00000010)
> > > +#define DP_AUX_DATA_MASK(0x0000ff00)
> > > +#define DP_AUX_DATA_INDEX_WRITE(0x80000000)
> > > +
> > > +#define REG_DP_AUX_TRANS_CTRL(0x00000038)
> > > +#define DP_AUX_TRANS_CTRL_I2C(0x00000100)
> > > +#define DP_AUX_TRANS_CTRL_GO(0x00000200)
> > > +#define DP_AUX_TRANS_CTRL_NO_SEND_ADDR(0x00000400)
> > > +#define DP_AUX_TRANS_CTRL_NO_SEND_STOP(0x00000800)
> > > +
> > > +#define REG_DP_TIMEOUT_COUNT(0x0000003C)
> > > +#define REG_DP_AUX_LIMITS(0x00000040)
> > > +#define REG_DP_AUX_STATUS(0x00000044)
> > > +
> > > +#define DP_DPCD_CP_IRQ(0x201)
> > > +#define DP_DPCD_RXSTATUS(0x69493)
> > > +
> > > +#define DP_INTERRUPT_TRANS_NUM(0x000000A0)
> > > +
> > > +#define REG_DP_MAINLINK_CTRL(0x00000000)
> > > +#define DP_MAINLINK_CTRL_ENABLE(0x00000001)
> > > +#define DP_MAINLINK_CTRL_RESET(0x00000002)
> > > +#define DP_MAINLINK_FB_BOUNDARY_SEL(0x02000000)
> > > +
> > > +#define REG_DP_STATE_CTRL(0x00000004)
> > > +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN1(0x00000001)
> > > +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN2(0x00000002)
> > > +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN3(0x00000004)
> > > +#define DP_STATE_CTRL_LINK_TRAINING_PATTERN4(0x00000008)
> > > +#define DP_STATE_CTRL_LINK_SYMBOL_ERR_MEASURE(0x00000010)
> > > +#define DP_STATE_CTRL_LINK_PRBS7(0x00000020)
> > > +#define DP_STATE_CTRL_LINK_TEST_CUSTOM_PATTERN(0x00000040)
> > > +#define DP_STATE_CTRL_SEND_VIDEO(0x00000080)
> > > +#define DP_STATE_CTRL_PUSH_IDLE (0x00000100)
> > > +
> > > +#define REG_DP_CONFIGURATION_CTRL(0x00000008)
> > > +#define DP_CONFIGURATION_CTRL_SYNC_ASYNC_CLK(0x00000001)
> > > +#define DP_CONFIGURATION_CTRL_STATIC_DYNAMIC_CN (0x00000002)
> > > +#define DP_CONFIGURATION_CTRL_P_INTERLACED(0x00000004)
> > > +#define DP_CONFIGURATION_CTRL_INTERLACED_BTF(0x00000008)
> > > +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES(0x00000010)
> > > +#define DP_CONFIGURATION_CTRL_ENHANCED_FRAMING(0x00000040)
> > > +#define DP_CONFIGURATION_CTRL_SEND_VSC(0x00000080)
> > > +#define DP_CONFIGURATION_CTRL_BPC(0x00000100)
> > > +#define DP_CONFIGURATION_CTRL_ASSR(0x00000400)
> > > +#define DP_CONFIGURATION_CTRL_RGB_YUV(0x00000800)
> > > +#define DP_CONFIGURATION_CTRL_LSCLK_DIV(0x00002000)
> > > +#define DP_CONFIGURATION_CTRL_NUM_OF_LANES_SHIFT      (0x04)
> > > +#define DP_CONFIGURATION_CTRL_BPC_SHIFT       (0x08)
> > > +#define DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT      (0x0D)
> > > +
> > > +#define REG_DP_SOFTWARE_MVID(0x00000010)
> > > +#define REG_DP_SOFTWARE_NVID(0x00000018)
> > > +#define REG_DP_TOTAL_HOR_VER(0x0000001C)
> > > +#define REG_DP_START_HOR_VER_FROM_SYNC(0x00000020)
> > > +#define REG_DP_HSYNC_VSYNC_WIDTH_POLARITY(0x00000024)
> > > +#define REG_DP_ACTIVE_HOR_VER(0x00000028)
> > > +
> > > +#define REG_DP_MISC1_MISC0(0x0000002C)
> > > +#define DP_MISC0_SYNCHRONOUS_CLK(0x00000001)
> > > +#define DP_MISC0_COLORIMETRY_CFG_SHIFT(0x00000001)
> > > +#define DP_MISC0_TEST_BITS_DEPTH_SHIFT(0x00000005)
> > > +
> > > +#define REG_DP_VALID_BOUNDARY(0x00000030)
> > > +#define REG_DP_VALID_BOUNDARY_2(0x00000034)
> > > +
> > > +#define REG_DP_LOGICAL2PHYSICAL_LANE_MAPPING(0x00000038)
> > > +#define LANE0_MAPPING_SHIFT(0x00000000)
> > > +#define LANE1_MAPPING_SHIFT(0x00000002)
> > > +#define LANE2_MAPPING_SHIFT(0x00000004)
> > > +#define LANE3_MAPPING_SHIFT(0x00000006)
> > > +
> > > +#define REG_DP_MAINLINK_READY(0x00000040)
> > > +#define DP_MAINLINK_READY_FOR_VIDEO(0x00000001)
> > > +#define DP_MAINLINK_READY_LINK_TRAINING_SHIFT(0x00000003)
> > > +
> > > +#define REG_DP_MAINLINK_LEVELS(0x00000044)
> > > +#define DP_MAINLINK_SAFE_TO_EXIT_LEVEL_2(0x00000002)
> > > +
> > > +
> > > +#define REG_DP_TU(0x0000004C)
> > > +
> > > +#define REG_DP_HBR2_COMPLIANCE_SCRAMBLER_RESET(0x00000054)
> > > +#define DP_HBR2_ERM_PATTERN(0x00010000)
> > > +
> > > +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG0(0x000000C0)
> > > +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG1(0x000000C4)
> > > +#define REG_DP_TEST_80BIT_CUSTOM_PATTERN_REG2(0x000000C8)
> > > +
> > > +#define MMSS_DP_MISC1_MISC0(0x0000002C)
> > > +#define MMSS_DP_AUDIO_TIMING_GEN(0x00000080)
> > > +#define MMSS_DP_AUDIO_TIMING_RBR_32(0x00000084)
> > > +#define MMSS_DP_AUDIO_TIMING_HBR_32(0x00000088)
> > > +#define MMSS_DP_AUDIO_TIMING_RBR_44(0x0000008C)
> > > +#define MMSS_DP_AUDIO_TIMING_HBR_44(0x00000090)
> > > +#define MMSS_DP_AUDIO_TIMING_RBR_48(0x00000094)
> > > +#define MMSS_DP_AUDIO_TIMING_HBR_48(0x00000098)
> > > +
> > > +#define MMSS_DP_PSR_CRC_RG(0x00000154)
> > > +#define MMSS_DP_PSR_CRC_B(0x00000158)
> > > +
> > > +#define REG_DP_COMPRESSION_MODE_CTRL(0x00000180)
> > > +
> > > +#define MMSS_DP_AUDIO_CFG(0x00000200)
> > > +#define MMSS_DP_AUDIO_STATUS(0x00000204)
> > > +#define MMSS_DP_AUDIO_PKT_CTRL(0x00000208)
> > > +#define MMSS_DP_AUDIO_PKT_CTRL2(0x0000020C)
> > > +#define MMSS_DP_AUDIO_ACR_CTRL(0x00000210)
> > > +#define MMSS_DP_AUDIO_CTRL_RESET(0x00000214)
> > > +
> > > +#define MMSS_DP_SDP_CFG(0x00000228)
> > > +#define MMSS_DP_SDP_CFG2(0x0000022C)
> > > +#define MMSS_DP_AUDIO_TIMESTAMP_0(0x00000230)
> > > +#define MMSS_DP_AUDIO_TIMESTAMP_1(0x00000234)
> > > +
> > > +#define MMSS_DP_AUDIO_STREAM_0(0x00000240)
> > > +#define MMSS_DP_AUDIO_STREAM_1(0x00000244)
> > > +
> > > +#define MMSS_DP_EXTENSION_0(0x00000250)
> > > +#define MMSS_DP_EXTENSION_1(0x00000254)
> > > +#define MMSS_DP_EXTENSION_2(0x00000258)
> > > +#define MMSS_DP_EXTENSION_3(0x0000025C)
> > > +#define MMSS_DP_EXTENSION_4(0x00000260)
> > > +#define MMSS_DP_EXTENSION_5(0x00000264)
> > > +#define MMSS_DP_EXTENSION_6(0x00000268)
> > > +#define MMSS_DP_EXTENSION_7(0x0000026C)
> > > +#define MMSS_DP_EXTENSION_8(0x00000270)
> > > +#define MMSS_DP_EXTENSION_9(0x00000274)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_0(0x00000278)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_1(0x0000027C)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_2(0x00000280)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_3(0x00000284)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_4(0x00000288)
> > > +#define MMSS_DP_AUDIO_COPYMANAGEMENT_5(0x0000028C)
> > > +#define MMSS_DP_AUDIO_ISRC_0(0x00000290)
> > > +#define MMSS_DP_AUDIO_ISRC_1(0x00000294)
> > > +#define MMSS_DP_AUDIO_ISRC_2(0x00000298)
> > > +#define MMSS_DP_AUDIO_ISRC_3(0x0000029C)
> > > +#define MMSS_DP_AUDIO_ISRC_4(0x000002A0)
> > > +#define MMSS_DP_AUDIO_ISRC_5(0x000002A4)
> > > +#define MMSS_DP_AUDIO_INFOFRAME_0(0x000002A8)
> > > +#define MMSS_DP_AUDIO_INFOFRAME_1(0x000002AC)
> > > +#define MMSS_DP_AUDIO_INFOFRAME_2(0x000002B0)
> > > +
> > > +#define MMSS_DP_GENERIC0_0(0x00000300)
> > > +#define MMSS_DP_GENERIC0_1(0x00000304)
> > > +#define MMSS_DP_GENERIC0_2(0x00000308)
> > > +#define MMSS_DP_GENERIC0_3(0x0000030C)
> > > +#define MMSS_DP_GENERIC0_4(0x00000310)
> > > +#define MMSS_DP_GENERIC0_5(0x00000314)
> > > +#define MMSS_DP_GENERIC0_6(0x00000318)
> > > +#define MMSS_DP_GENERIC0_7(0x0000031C)
> > > +#define MMSS_DP_GENERIC0_8(0x00000320)
> > > +#define MMSS_DP_GENERIC0_9(0x00000324)
> > > +#define MMSS_DP_GENERIC1_0(0x00000328)
> > > +#define MMSS_DP_GENERIC1_1(0x0000032C)
> > > +#define MMSS_DP_GENERIC1_2(0x00000330)
> > > +#define MMSS_DP_GENERIC1_3(0x00000334)
> > > +#define MMSS_DP_GENERIC1_4(0x00000338)
> > > +#define MMSS_DP_GENERIC1_5(0x0000033C)
> > > +#define MMSS_DP_GENERIC1_6(0x00000340)
> > > +#define MMSS_DP_GENERIC1_7(0x00000344)
> > > +#define MMSS_DP_GENERIC1_8(0x00000348)
> > > +#define MMSS_DP_GENERIC1_9(0x0000034C)
> > > +
> > > +#define MMSS_DP_VSCEXT_0(0x000002D0)
> > > +#define MMSS_DP_VSCEXT_1(0x000002D4)
> > > +#define MMSS_DP_VSCEXT_2(0x000002D8)
> > > +#define MMSS_DP_VSCEXT_3(0x000002DC)
> > > +#define MMSS_DP_VSCEXT_4(0x000002E0)
> > > +#define MMSS_DP_VSCEXT_5(0x000002E4)
> > > +#define MMSS_DP_VSCEXT_6(0x000002E8)
> > > +#define MMSS_DP_VSCEXT_7(0x000002EC)
> > > +#define MMSS_DP_VSCEXT_8(0x000002F0)
> > > +#define MMSS_DP_VSCEXT_9(0x000002F4)
> > > +
> > > +#define MMSS_DP_BIST_ENABLE(0x00000000)
> > > +#define DP_BIST_ENABLE_DPBIST_EN(0x00000001)
> > > +
> > > +#define MMSS_DP_TIMING_ENGINE_EN(0x00000010)
> > > +#define DP_TIMING_ENGINE_EN_EN(0x00000001)
> > > +
> > > +#define MMSS_DP_INTF_CONFIG(0x00000014)
> > > +#define MMSS_DP_INTF_HSYNC_CTL(0x00000018)
> > > +#define MMSS_DP_INTF_VSYNC_PERIOD_F0(0x0000001C)
> > > +#define MMSS_DP_INTF_VSYNC_PERIOD_F1(0x00000020)
> > > +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F0(0x00000024)
> > > +#define MMSS_DP_INTF_VSYNC_PULSE_WIDTH_F1(0x00000028)
> > > +#define MMSS_INTF_DISPLAY_V_START_F0(0x0000002C)
> > > +#define MMSS_INTF_DISPLAY_V_START_F1(0x00000030)
> > > +#define MMSS_DP_INTF_DISPLAY_V_END_F0(0x00000034)
> > > +#define MMSS_DP_INTF_DISPLAY_V_END_F1(0x00000038)
> > > +#define MMSS_DP_INTF_ACTIVE_V_START_F0(0x0000003C)
> > > +#define MMSS_DP_INTF_ACTIVE_V_START_F1(0x00000040)
> > > +#define MMSS_DP_INTF_ACTIVE_V_END_F0(0x00000044)
> > > +#define MMSS_DP_INTF_ACTIVE_V_END_F1(0x00000048)
> > > +#define MMSS_DP_INTF_DISPLAY_HCTL(0x0000004C)
> > > +#define MMSS_DP_INTF_ACTIVE_HCTL(0x00000050)
> > > +#define MMSS_DP_INTF_POLARITY_CTL(0x00000058)
> > > +
> > > +#define MMSS_DP_TPG_MAIN_CONTROL(0x00000060)
> > > +#define DP_TPG_CHECKERED_RECT_PATTERN(0x00000100)
> > > +
> > > +#define MMSS_DP_TPG_VIDEO_CONFIG(0x00000064)
> > > +#define DP_TPG_VIDEO_CONFIG_BPP_8BIT(0x00000001)
> > > +#define DP_TPG_VIDEO_CONFIG_RGB(0x00000004)
> > > +
> > > +#define MMSS_DP_ASYNC_FIFO_CONFIG(0x00000088)
> > > +
> > > +/*DP PHY Register offsets */
> > > +#define REG_DP_PHY_REVISION_ID0                 (0x00000000)
> > > +#define REG_DP_PHY_REVISION_ID1                 (0x00000004)
> > > +#define REG_DP_PHY_REVISION_ID2                 (0x00000008)
> > > +#define REG_DP_PHY_REVISION_ID3                 (0x0000000C)
> > > +
> > > +#define REG_DP_PHY_CFG                          (0x00000010)
> > > +
> > > +#define REG_DP_PHY_PD_CTL                       (0x00000018)
> > > +#define DP_PHY_PD_CTL_PWRDN                     (0x00000001)
> > > +#define DP_PHY_PD_CTL_PSR_PWRDN(0x00000002)
> > > +#define DP_PHY_PD_CTL_AUX_PWRDN(0x00000004)
> > > +#define DP_PHY_PD_CTL_LANE_0_1_PWRDN(0x00000008)
> > > +#define DP_PHY_PD_CTL_LANE_2_3_PWRDN(0x00000010)
> > > +#define DP_PHY_PD_CTL_PLL_PWRDN(0x00000020)
> > > +#define DP_PHY_PD_CTL_DP_CLAMP_EN(0x00000040)
> > > +
> > > +#define REG_DP_PHY_MODE                         (0x0000001C)
> > > +
> > > +#define REG_DP_PHY_AUX_CFG0                     (0x00000020)
> > > +#define REG_DP_PHY_AUX_CFG1                     (0x00000024)
> > > +#define REG_DP_PHY_AUX_CFG2                     (0x00000028)
> > > +#define REG_DP_PHY_AUX_CFG3                     (0x0000002C)
> > > +#define REG_DP_PHY_AUX_CFG4                     (0x00000030)
> > > +#define REG_DP_PHY_AUX_CFG5                     (0x00000034)
> > > +#define REG_DP_PHY_AUX_CFG6                     (0x00000038)
> > > +#define REG_DP_PHY_AUX_CFG7                     (0x0000003C)
> > > +#define REG_DP_PHY_AUX_CFG8                     (0x00000040)
> > > +#define REG_DP_PHY_AUX_CFG9                     (0x00000044)
> > > +
> > > +#define REG_DP_PHY_AUX_INTERRUPT_MASK           (0x00000048)
> > > +#define PHY_AUX_STOP_ERR_MASK                   (0x00000001)
> > > +#define PHY_AUX_DEC_ERR_MASK                    (0x00000002)
> > > +#define PHY_AUX_SYNC_ERR_MASK                   (0x00000004)
> > > +#define PHY_AUX_ALIGN_ERR_MASK                  (0x00000008)
> > > +#define PHY_AUX_REQ_ERR_MASK                    (0x00000010)
> > > +
> > > +
> > > +#define REG_DP_PHY_AUX_INTERRUPT_CLEAR          (0x0000004C)
> > > +#define REG_DP_PHY_AUX_BIST_CFG(0x00000050)
> > > +
> > > +#define REG_DP_PHY_VCO_DIV0x0064
> > > +#define REG_DP_PHY_TX0_TX1_LANE_CTL0x006C
> > > +#define REG_DP_PHY_TX2_TX3_LANE_CTL0x0088
> > > +
> > > +#define REG_DP_PHY_SPARE0(0x00AC)
> > > +#define DP_PHY_SPARE0_MASK(0x000F)
> > > +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT(0x0004);
> > > +
> > > +#define REG_DP_PHY_STATUS(0x00C0)
> > > +
> > > +/* Tx registers */
> > > +#define REG_DP_PHY_TXn_BIST_MODE_LANENO0x0000
> > > +#define REG_DP_PHY_TXn_CLKBUF_ENABLE0x0008
> > > +
> > > +#define REG_DP_PHY_TXn_TX_EMP_POST1_LVL0x000C
> > > +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK0x001F
> > > +#define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN0x0020
> > > +
> > > +#define REG_DP_PHY_TXn_TX_DRV_LVL0x001C
> > > +#define DP_PHY_TXn_TX_DRV_LVL_MASK0x001F
> > > +#define DP_PHY_TXn_TX_DRV_LVL_MUX_EN0x0020
> > > +
> > > +#define REG_DP_PHY_TXn_RESET_TSYNC_EN0x0024
> > > +#define REG_DP_PHY_TXn_PRE_STALL_LDO_BOOST_EN0x0028
> > > +#define REG_DP_PHY_TXn_TX_BAND0x002C
> > > +#define REG_DP_PHY_TXn_SLEW_CNTL0x0030
> > > +#define REG_DP_PHY_TXn_INTERFACE_SELECT0x0034
> > > +
> > > +#define REG_DP_PHY_TXn_RES_CODE_LANE_TX0x003C
> > > +#define REG_DP_PHY_TXn_RES_CODE_LANE_RX0x0040
> > > +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_TX0x0044
> > > +#define REG_DP_PHY_TXn_RES_CODE_LANE_OFFSET_RX0x0048
> > > +
> > > +#define REG_DP_PHY_TXn_DEBUG_BUS_SEL0x0058
> > > +#define REG_DP_PHY_TXn_TRANSCEIVER_BIAS_EN0x005C
> > > +#define REG_DP_PHY_TXn_HIGHZ_DRVR_EN0x0060
> > > +#define REG_DP_PHY_TXn_TX_POL_INV0x0064
> > > +#define REG_DP_PHY_TXn_PARRATE_REC_DETECT_IDLE_EN 0x0068
> > > +
> > > +#define REG_DP_PHY_TXn_LANE_MODE_10x008C
> > > +
> > > +#define REG_DP_PHY_TXn_TRAN_DRVR_EMP_EN0x00C0
> > > +#define REG_DP_PHY_TXn_TX_INTERFACE_MODE0x00C4
> > > +
> > > +#define REG_DP_PHY_TXn_VMODE_CTRL10x00F0
> > > +
> > > +/* PLL register offset */
> > > +#define QSERDES_COM_ATB_SEL10x0000
> > > +#define QSERDES_COM_ATB_SEL20x0004
> > > +#define QSERDES_COM_FREQ_UPDATE0x0008
> > > +#define QSERDES_COM_BG_TIMER0x000C
> > > +#define QSERDES_COM_SSC_EN_CENTER0x0010
> > > +#define QSERDES_COM_SSC_ADJ_PER10x0014
> > > +#define QSERDES_COM_SSC_ADJ_PER20x0018
> > > +#define QSERDES_COM_SSC_PER10x001C
> > > +#define QSERDES_COM_SSC_PER20x0020
> > > +#define QSERDES_COM_SSC_STEP_SIZE10x0024
> > > +#define QSERDES_COM_SSC_STEP_SIZE20x0028
> > > +#define QSERDES_COM_POST_DIV0x002C
> > > +#define QSERDES_COM_POST_DIV_MUX0x0030
> > > +
> > > +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN0x0034
> > > +#define QSERDES_COM_BIAS_EN0x0001
> > > +#define QSERDES_COM_BIAS_EN_MUX0x0002
> > > +#define QSERDES_COM_CLKBUF_R_EN0x0004
> > > +#define QSERDES_COM_CLKBUF_L_EN0x0008
> > > +#define QSERDES_COM_EN_SYSCLK_TX_SEL0x0010
> > > +#define QSERDES_COM_CLKBUF_RX_DRIVE_L0x0020
> > > +#define QSERDES_COM_CLKBUF_RX_DRIVE_R0x0040
> > > +
> > > +#define QSERDES_COM_CLK_ENABLE10x0038
> > > +#define QSERDES_COM_SYS_CLK_CTRL0x003C
> > > +#define QSERDES_COM_SYSCLK_BUF_ENABLE0x0040
> > > +#define QSERDES_COM_PLL_EN0x0044
> > > +#define QSERDES_COM_PLL_IVCO0x0048
> > > +#define QSERDES_COM_CMN_IETRIM0x004C
> > > +#define QSERDES_COM_CMN_IPTRIM0x0050
> > > +
> > > +#define QSERDES_COM_CP_CTRL_MODE00x0060
> > > +#define QSERDES_COM_CP_CTRL_MODE10x0064
> > > +#define QSERDES_COM_PLL_RCTRL_MODE00x0068
> > > +#define QSERDES_COM_PLL_RCTRL_MODE10x006C
> > > +#define QSERDES_COM_PLL_CCTRL_MODE00x0070
> > > +#define QSERDES_COM_PLL_CCTRL_MODE10x0074
> > > +#define QSERDES_COM_PLL_CNTRL0x0078
> > > +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM0x007C
> > > +#define QSERDES_COM_SYSCLK_EN_SEL0x0080
> > > +#define QSERDES_COM_CML_SYSCLK_SEL0x0084
> > > +#define QSERDES_COM_RESETSM_CNTRL0x0088
> > > +#define QSERDES_COM_RESETSM_CNTRL20x008C
> > > +#define QSERDES_COM_LOCK_CMP_EN0x0090
> > > +#define QSERDES_COM_LOCK_CMP_CFG0x0094
> > > +#define QSERDES_COM_LOCK_CMP1_MODE00x0098
> > > +#define QSERDES_COM_LOCK_CMP2_MODE00x009C
> > > +#define QSERDES_COM_LOCK_CMP3_MODE00x00A0
> > > +
> > > +#define QSERDES_COM_DEC_START_MODE00x00B0
> > > +#define QSERDES_COM_DEC_START_MODE10x00B4
> > > +#define QSERDES_COM_DIV_FRAC_START1_MODE00x00B8
> > > +#define QSERDES_COM_DIV_FRAC_START2_MODE00x00BC
> > > +#define QSERDES_COM_DIV_FRAC_START3_MODE00x00C0
> > > +#define QSERDES_COM_DIV_FRAC_START1_MODE10x00C4
> > > +#define QSERDES_COM_DIV_FRAC_START2_MODE10x00C8
> > > +#define QSERDES_COM_DIV_FRAC_START3_MODE10x00CC
> > > +#define QSERDES_COM_INTEGLOOP_INITVAL0x00D0
> > > +#define QSERDES_COM_INTEGLOOP_EN0x00D4
> > > +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE00x00D8
> > > +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE00x00DC
> > > +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE10x00E0
> > > +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE10x00E4
> > > +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL0x00E8
> > > +#define QSERDES_COM_VCO_TUNE_CTRL0x00EC
> > > +#define QSERDES_COM_VCO_TUNE_MAP0x00F0
> > > +
> > > +#define QSERDES_COM_CMN_STATUS0x0124
> > > +#define QSERDES_COM_RESET_SM_STATUS0x0128
> > > +
> > > +#define QSERDES_COM_CLK_SEL0x0138
> > > +#define QSERDES_COM_HSCLK_SEL0x013C
> > > +
> > > +#define QSERDES_COM_CORECLK_DIV_MODE00x0148
> > > +
> > > +#define QSERDES_COM_SW_RESET0x0150
> > > +#define QSERDES_COM_CORE_CLK_EN0x0154
> > > +#define QSERDES_COM_C_READY_STATUS0x0158
> > > +#define QSERDES_COM_CMN_CONFIG0x015C
> > > +
> > > +#define QSERDES_COM_SVS_MODE_CLK_SEL0x0164
> > > +
> > > +/* DP MMSS_CC registers */
> > > +#define MMSS_DP_LINK_CMD_RCGR(0x0138)
> > > +#define MMSS_DP_LINK_CFG_RCGR(0x013C)
> > > +#define MMSS_DP_PIXEL_M(0x0174)
> > > +#define MMSS_DP_PIXEL_N(0x0178)
> > > +
> > > +/* DP HDCP 1.3 registers */
> > > +#define DP_HDCP_CTRL                                   (0x0A0)
> > > +#define DP_HDCP_STATUS                                 (0x0A4)
> > > +#define DP_HDCP_SW_UPPER_AKSV                          (0x098)
> > > +#define DP_HDCP_SW_LOWER_AKSV                          (0x09C)
> > > +#define DP_HDCP_ENTROPY_CTRL0                          (0x350)
> > > +#define DP_HDCP_ENTROPY_CTRL1                          (0x35C)
> > > +#define DP_HDCP_SHA_STATUS                             (0x0C8)
> > > +#define DP_HDCP_RCVPORT_DATA2_0                        (0x0B0)
> > > +#define DP_HDCP_RCVPORT_DATA3                          (0x0A4)
> > > +#define DP_HDCP_RCVPORT_DATA4                          (0x0A8)
> > > +#define DP_HDCP_RCVPORT_DATA5                          (0x0C0)
> > > +#define DP_HDCP_RCVPORT_DATA6                          (0x0C4)
> > > +
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_CTRL           (0x024)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_SHA_DATA           (0x028)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0      (0x004)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1      (0x008)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA7      (0x00C)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA8      (0x010)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA9      (0x014)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA10     (0x018)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA11     (0x01C)
> > > +#define HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12     (0x020)
> > > +
> > > +/* USB3 DP COM registers */
> > > +#define REG_USB3_DP_COM_RESET_OVRD_CTRL(0x1C)
> > > +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET(0x01)
> > > +#define USB3_DP_COM_OVRD_CTRL_SW_DPPHY_RESET_MUX(0x02)
> > > +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET(0x04)
> > > +#define USB3_DP_COM_OVRD_CTRL_SW_USB3PHY_RESET_MUX(0x08)
> > > +
> > > +#define REG_USB3_DP_COM_PHY_MODE_CTRL(0x00)
> > > +#define USB3_DP_COM_PHY_MODE_DP(0x02)
> > > +
> > > +#define REG_USB3_DP_COM_SW_RESET(0x04)
> > > +#define USB3_DP_COM_SW_RESET_SET(0x01)
> > > +
> > > +#define REG_USB3_DP_COM_TYPEC_CTRL(0x10)
> > > +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL(0x01)
> > > +#define USB3_DP_COM_TYPEC_CTRL_PORTSEL_MUX(0x02)
> > > +
> > > +#define REG_USB3_DP_COM_SWI_CTRL(0x0c)
> > > +
> > > +#define REG_USB3_DP_COM_POWER_DOWN_CTRL(0x08)
> > > +#define USB3_DP_COM_POWER_DOWN_CTRL_SW_PWRDN(0x01)
> > > +
> > > +
> > > +
> > > +#endif /* _DP_REG_H_ */
> > > diff --git a/drivers/gpu/drm/msm/msm_drv.c
> > > b/drivers/gpu/drm/msm/msm_drv.c
> > > index c84f0a8..e5e93e3 100644
> > > --- a/drivers/gpu/drm/msm/msm_drv.c
> > > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > > @@ -1342,6 +1342,7 @@ static int __init msm_drm_register(void)
> > >  msm_dsi_register();
> > >  msm_edp_register();
> > >  msm_hdmi_register();
> > > +msm_dp_register();
> > >  adreno_register();
> > >  return platform_driver_register(&msm_platform_driver);
> > >  }
> > > @@ -1350,6 +1351,7 @@ static void __exit msm_drm_unregister(void)
> > >  {
> > >  DBG("fini");
> > >  platform_driver_unregister(&msm_platform_driver);
> > > +msm_dp_unregister();
> > >  msm_hdmi_unregister();
> > >  adreno_unregister();
> > >  msm_edp_unregister();
> > > diff --git a/drivers/gpu/drm/msm/msm_drv.h
> > > b/drivers/gpu/drm/msm/msm_drv.h
> > > index 71547e7..8b068ec 100644
> > > --- a/drivers/gpu/drm/msm/msm_drv.h
> > > +++ b/drivers/gpu/drm/msm/msm_drv.h
> > > @@ -159,6 +159,8 @@ struct msm_drm_private {
> > >  /* DSI is shared by mdp4 and mdp5 */
> > >  struct msm_dsi *dsi[2];
> > > 
> > > +struct msm_dp *dp;
> > > +
> > >  /* when we have more than one 'msm_gpu' these need to be an array: */
> > >  struct msm_gpu *gpu;
> > >  struct msm_file_private *lastctx;
> > > @@ -375,6 +377,46 @@ static inline int msm_dsi_modeset_init(struct
> > > msm_dsi *msm_dsi,
> > >  }
> > >  #endif
> > > 
> > > +#ifdef CONFIG_DRM_MSM_DP
> > > +int __init msm_dp_register(void);
> > > +void __exit msm_dp_unregister(void);
> > > +int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
> > > *dev,
> > > + struct drm_encoder *encoder);
> > > +int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder
> > > *encoder);
> > > +int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder
> > > *encoder);
> > > +void msm_dp_display_mode_set(struct msm_dp *dp, struct drm_encoder
> > > *encoder,
> > > +struct drm_display_mode *mode,
> > > +struct drm_display_mode *adjusted_mode);
> > > +
> > > +#else
> > > +static inline int __init msm_dp_register(void)
> > > +{
> > > +return -EINVAL;
> > > +}
> > > +static inline void __exit msm_dp_unregister(void)
> > > +{
> > > +}
> > > +static inline int msm_dp_modeset_init(struct msm_dp *dp_display,
> > > +       struct drm_device *dev,
> > > +       struct drm_encoder *encoder)
> > > +{
> > > +return -EINVAL;
> > > +}
> > > +static inline int msm_dp_display_enable(struct msm_dp *dp, struct
> > > drm_encoder *encoder)
> > > +{
> > > +return -EINVAL;
> > > +}
> > > +static inline int msm_dp_display_disable(struct msm_dp *dp, struct
> > > drm_encoder *encoder)
> > > +{
> > > +return -EINVAL;
> > > +}
> > > +static inline void msm_dp_display_mode_set(struct msm_dp *dp, struct
> > > drm_encoder *encoder,
> > > +struct drm_display_mode *mode,
> > > +struct drm_display_mode *adjusted_mode)
> > > +{
> > > +}
> > > +#endif
> > > +
> > >  void __init msm_mdp_register(void);
> > >  void __exit msm_mdp_unregister(void);
> > >  void __init msm_dpu_register(void);
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Rob Clark]

On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add the needed displayPort files to enable DP driver
> on msm target.
>
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
>
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
>
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---

[snip]

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f96e142..29ac7d3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>
>         trace_dpu_enc_mode_set(DRMID(drm_enc));
>
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
> +               msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
> +

for better or for worse, DSI and HDMI backends create an internal
drm_bridge object to avoid all of these shunts over from the encoder.
We might be still the only driver to do this, but IMHO it is better
than making each encoder know about each backend, so we might as well
stick with that.

(same goes for the other 'if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS)'s)

BR,
-R


>         list_for_each_entry(conn_iter, connector_list, head)
>                 if (conn_iter->encoder == drm_enc)
>                         conn = conn_iter;

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Rob Clark]

On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add the needed displayPort files to enable DP driver
> on msm target.
>
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
>
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
>
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---

[snip]

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f96e142..29ac7d3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>
>         trace_dpu_enc_mode_set(DRMID(drm_enc));
>
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && priv->dp)
> +               msm_dp_display_mode_set(priv->dp, drm_enc, mode, adj_mode);
> +

for better or for worse, DSI and HDMI backends create an internal
drm_bridge object to avoid all of these shunts over from the encoder.
We might be still the only driver to do this, but IMHO it is better
than making each encoder know about each backend, so we might as well
stick with that.

(same goes for the other 'if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS)'s)

BR,
-R


>         list_for_each_entry(conn_iter, connector_list, head)
>                 if (conn_iter->encoder == drm_enc)
>                         conn = conn_iter;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[chandanu]

Hello Rob,
We removed the bridge object for DisplayPort due to review comments in 
patch set 1.

Added more details below.

> -------- Original Message --------
> Subject: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver 
> support
> Date: 2019-12-02 08:48
> From: Rob Clark <robdclark@gmail.com>
> To: Chandan Uddaraju <chandanu@codeaurora.org>
> Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
> <devicetree@vger.kernel.org>, linux-arm-msm
> <linux-arm-msm@vger.kernel.org>, Abhinav Kumar
> <abhinavk@codeaurora.org>, Sean Paul <seanpaul@chromium.org>,
> dri-devel <dri-devel@lists.freedesktop.org>, "Kristian H. Kristensen"
> <hoegsberg@google.com>, freedreno <freedreno@lists.freedesktop.org>
> 
> On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju 
> <chandanu@codeaurora.org> wrote:
>> 
>> Add the needed displayPort files to enable DP driver
>> on msm target.
>> 
>> "dp_display" module is the main module that calls into
>> other sub-modules. "dp_drm" file represents the interface
>> between DRM framework and DP driver.
>> 
>> changes in v2:
>> -- Update copyright markings on all relevant files.
>> -- Change pr_err() to DRM_ERROR()
>> -- Use APIs directly instead of function pointers.
>> -- Use drm_display_mode structure to store link parameters in the 
>> driver.
>> -- Use macros for register definitions instead of hardcoded values.
>> -- Replace writel_relaxed/readl_relaxed with writel/readl
>>    and remove memory barriers.
>> -- Remove unnecessary NULL checks.
>> -- Use drm helper functions for dpcd read/write.
>> -- Use DRM_DEBUG_DP for debug msgs.
>> 
>> changes in V3:
>> -- Removed changes in dpu_io_util.[ch]
>> -- Added locking around "is_connected" flag and removed atomic_set()
>> -- Removed the argument validation checks in all the static functions
>>    except initialization functions and few API calls across msm/dp 
>> files
>> -- Removed hardcoded values for register reads/writes
>> -- Removed vreg related generic structures.
>> -- Added return values where ever necessary.
>> -- Updated dp_ctrl_on function.
>> -- Calling the ctrl specific catalog functions directly instead of
>>    function pointers.
>> -- Added seperate change that adds standard value in drm_dp_helper 
>> file.
>> -- Added separate change in this list that is used to initialize
>>    displayport in DPU driver.
>> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>> 
>> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
>> ---
> 
> [snip]
> 
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index f96e142..29ac7d3 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct 
>> drm_encoder *drm_enc,
>> 
>>         trace_dpu_enc_mode_set(DRMID(drm_enc));
>> 
>> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && 
>> priv->dp)
>> +               msm_dp_display_mode_set(priv->dp, drm_enc, mode, 
>> adj_mode);
>> +
> 
> for better or for worse, DSI and HDMI backends create an internal
> drm_bridge object to avoid all of these shunts over from the encoder.
> We might be still the only driver to do this, but IMHO it is better
> than making each encoder know about each backend, so we might as well
> stick with that.
> 
> (same goes for the other 'if (drm_enc->encoder_type == 
> DRM_MODE_ENCODER_TMDS)'s)
> 

We had the below comments from Sean Paul to remove the bridge object in 
patch set 1 of this change.

**********  ******************
> +static const struct drm_bridge_funcs dp_bridge_ops = {
> +	.mode_fixup   = dp_bridge_mode_fixup,
> +	.pre_enable   = dp_bridge_pre_enable,
> +	.enable       = dp_bridge_enable,
> +	.disable      = dp_bridge_disable,
> +	.post_disable = dp_bridge_post_disable,
> +	.mode_set     = dp_bridge_mode_set,
> +};

I'm not convinced you need any of this. The only advantage a bridge gets 
you is
to be involved in modeset. However the only thing you do in modeset is 
save the
mode (which is only used in enable). So why not just use the mode from 
the
crtc's state when encoder->enable is called?

That allows you to delete all of the bridge stuff here.

> +
> +int dp_connector_post_init(struct drm_connector *connector, void 
> *display)
> +{
> +	struct msm_dp *dp_display = display;
> +
> +	if (!dp_display)
> +		return -EINVAL;

*******************************  ****************

thanks
Chandan

> BR,
> -R
> 
> 
>>         list_for_each_entry(conn_iter, connector_list, head)
>>                 if (conn_iter->encoder == drm_enc)
>>                         conn = conn_iter;
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[chandanu]

Hello Rob,
We removed the bridge object for DisplayPort due to review comments in 
patch set 1.

Added more details below.

> -------- Original Message --------
> Subject: Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver 
> support
> Date: 2019-12-02 08:48
> From: Rob Clark <robdclark@gmail.com>
> To: Chandan Uddaraju <chandanu@codeaurora.org>
> Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
> <devicetree@vger.kernel.org>, linux-arm-msm
> <linux-arm-msm@vger.kernel.org>, Abhinav Kumar
> <abhinavk@codeaurora.org>, Sean Paul <seanpaul@chromium.org>,
> dri-devel <dri-devel@lists.freedesktop.org>, "Kristian H. Kristensen"
> <hoegsberg@google.com>, freedreno <freedreno@lists.freedesktop.org>
> 
> On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju 
> <chandanu@codeaurora.org> wrote:
>> 
>> Add the needed displayPort files to enable DP driver
>> on msm target.
>> 
>> "dp_display" module is the main module that calls into
>> other sub-modules. "dp_drm" file represents the interface
>> between DRM framework and DP driver.
>> 
>> changes in v2:
>> -- Update copyright markings on all relevant files.
>> -- Change pr_err() to DRM_ERROR()
>> -- Use APIs directly instead of function pointers.
>> -- Use drm_display_mode structure to store link parameters in the 
>> driver.
>> -- Use macros for register definitions instead of hardcoded values.
>> -- Replace writel_relaxed/readl_relaxed with writel/readl
>>    and remove memory barriers.
>> -- Remove unnecessary NULL checks.
>> -- Use drm helper functions for dpcd read/write.
>> -- Use DRM_DEBUG_DP for debug msgs.
>> 
>> changes in V3:
>> -- Removed changes in dpu_io_util.[ch]
>> -- Added locking around "is_connected" flag and removed atomic_set()
>> -- Removed the argument validation checks in all the static functions
>>    except initialization functions and few API calls across msm/dp 
>> files
>> -- Removed hardcoded values for register reads/writes
>> -- Removed vreg related generic structures.
>> -- Added return values where ever necessary.
>> -- Updated dp_ctrl_on function.
>> -- Calling the ctrl specific catalog functions directly instead of
>>    function pointers.
>> -- Added seperate change that adds standard value in drm_dp_helper 
>> file.
>> -- Added separate change in this list that is used to initialize
>>    displayport in DPU driver.
>> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>> 
>> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
>> ---
> 
> [snip]
> 
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index f96e142..29ac7d3 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -967,6 +967,9 @@ static void dpu_encoder_virt_mode_set(struct 
>> drm_encoder *drm_enc,
>> 
>>         trace_dpu_enc_mode_set(DRMID(drm_enc));
>> 
>> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && 
>> priv->dp)
>> +               msm_dp_display_mode_set(priv->dp, drm_enc, mode, 
>> adj_mode);
>> +
> 
> for better or for worse, DSI and HDMI backends create an internal
> drm_bridge object to avoid all of these shunts over from the encoder.
> We might be still the only driver to do this, but IMHO it is better
> than making each encoder know about each backend, so we might as well
> stick with that.
> 
> (same goes for the other 'if (drm_enc->encoder_type == 
> DRM_MODE_ENCODER_TMDS)'s)
> 

We had the below comments from Sean Paul to remove the bridge object in 
patch set 1 of this change.

**********  ******************
> +static const struct drm_bridge_funcs dp_bridge_ops = {
> +	.mode_fixup   = dp_bridge_mode_fixup,
> +	.pre_enable   = dp_bridge_pre_enable,
> +	.enable       = dp_bridge_enable,
> +	.disable      = dp_bridge_disable,
> +	.post_disable = dp_bridge_post_disable,
> +	.mode_set     = dp_bridge_mode_set,
> +};

I'm not convinced you need any of this. The only advantage a bridge gets 
you is
to be involved in modeset. However the only thing you do in modeset is 
save the
mode (which is only used in enable). So why not just use the mode from 
the
crtc's state when encoder->enable is called?

That allows you to delete all of the bridge stuff here.

> +
> +int dp_connector_post_init(struct drm_connector *connector, void 
> *display)
> +{
> +	struct msm_dp *dp_display = display;
> +
> +	if (!dp_display)
> +		return -EINVAL;

*******************************  ****************

thanks
Chandan

> BR,
> -R
> 
> 
>>         list_for_each_entry(conn_iter, connector_list, head)
>>                 if (conn_iter->encoder == drm_enc)
>>                         conn = conn_iter;
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Rob Clark]

On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add the needed displayPort files to enable DP driver
> on msm target.
>
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
>
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
>
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---

[snip]

> +
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
> +                                       u32 rate, u32 stream_rate_khz,
> +                                       bool fixed_nvid)
> +{
> +       u32 pixel_m, pixel_n;
> +       u32 mvid, nvid;
> +       u64 mvid_calc;
> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
> +                               struct dp_catalog_private, dp_catalog);
> +
> +       if (fixed_nvid) {
> +               nvid = DP_LINK_CONSTANT_N_VALUE;
> +               DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
> +
> +               /*
> +                * For intermediate results, use 64 bit arithmetic to avoid
> +                * loss of precision.
> +                */
> +               mvid_calc = (u64) stream_rate_khz * nvid;
> +               mvid_calc = div_u64(mvid_calc, rate);
> +
> +               /*
> +                * truncate back to 32 bits as this final divided value will
> +                * always be within the range of a 32 bit unsigned int.
> +                */
> +               mvid = (u32) mvid_calc;
> +               DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
> +                       rate, stream_rate_khz);
> +       } else {
> +               pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
> +               pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);

Can we just calculate m/n from the rate instead.  That gets rid of
having to ioremap() the dispcc region, which is really ugly.

BR,
-R

> +               DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
> +
> +               mvid = (pixel_m & 0xFFFF) * 5;
> +               nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
> +
> +               DRM_DEBUG_DP("rate = %d\n", rate);
> +
> +               switch (drm_dp_link_rate_to_bw_code(rate)) {
> +               case DP_LINK_BW_5_4:
> +                       nvid *= 2;
> +                       break;
> +               case DP_LINK_BW_8_1:
> +                       nvid *= 3;
> +                       break;
> +               default:
> +                       break;
> +               }
> +       }
> +
> +       DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
> +       dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
> +       dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
> +}

Re: [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[Rob Clark]

On Mon, Dec 2, 2019 at 5:48 AM Chandan Uddaraju <chandanu@codeaurora.org> wrote:
>
> Add the needed displayPort files to enable DP driver
> on msm target.
>
> "dp_display" module is the main module that calls into
> other sub-modules. "dp_drm" file represents the interface
> between DRM framework and DP driver.
>
> changes in v2:
> -- Update copyright markings on all relevant files.
> -- Change pr_err() to DRM_ERROR()
> -- Use APIs directly instead of function pointers.
> -- Use drm_display_mode structure to store link parameters in the driver.
> -- Use macros for register definitions instead of hardcoded values.
> -- Replace writel_relaxed/readl_relaxed with writel/readl
>    and remove memory barriers.
> -- Remove unnecessary NULL checks.
> -- Use drm helper functions for dpcd read/write.
> -- Use DRM_DEBUG_DP for debug msgs.
>
> changes in V3:
> -- Removed changes in dpu_io_util.[ch]
> -- Added locking around "is_connected" flag and removed atomic_set()
> -- Removed the argument validation checks in all the static functions
>    except initialization functions and few API calls across msm/dp files
> -- Removed hardcoded values for register reads/writes
> -- Removed vreg related generic structures.
> -- Added return values where ever necessary.
> -- Updated dp_ctrl_on function.
> -- Calling the ctrl specific catalog functions directly instead of
>    function pointers.
> -- Added seperate change that adds standard value in drm_dp_helper file.
> -- Added separate change in this list that is used to initialize
>    displayport in DPU driver.
> -- Added change to use drm_dp_get_adjust_request_voltage() function.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> ---

[snip]

> +
> +void dp_catalog_ctrl_config_msa(struct dp_catalog *dp_catalog,
> +                                       u32 rate, u32 stream_rate_khz,
> +                                       bool fixed_nvid)
> +{
> +       u32 pixel_m, pixel_n;
> +       u32 mvid, nvid;
> +       u64 mvid_calc;
> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
> +                               struct dp_catalog_private, dp_catalog);
> +
> +       if (fixed_nvid) {
> +               nvid = DP_LINK_CONSTANT_N_VALUE;
> +               DRM_DEBUG_DP("use fixed NVID=0x%x\n", nvid);
> +
> +               /*
> +                * For intermediate results, use 64 bit arithmetic to avoid
> +                * loss of precision.
> +                */
> +               mvid_calc = (u64) stream_rate_khz * nvid;
> +               mvid_calc = div_u64(mvid_calc, rate);
> +
> +               /*
> +                * truncate back to 32 bits as this final divided value will
> +                * always be within the range of a 32 bit unsigned int.
> +                */
> +               mvid = (u32) mvid_calc;
> +               DRM_DEBUG_DP("link rate=%dkbps, stream_rate_khz=%uKhz",
> +                       rate, stream_rate_khz);
> +       } else {
> +               pixel_m = dp_read_cc(catalog, MMSS_DP_PIXEL_M);
> +               pixel_n = dp_read_cc(catalog, MMSS_DP_PIXEL_N);

Can we just calculate m/n from the rate instead.  That gets rid of
having to ioremap() the dispcc region, which is really ugly.

BR,
-R

> +               DRM_DEBUG_DP("pixel_m=0x%x, pixel_n=0x%x\n", pixel_m, pixel_n);
> +
> +               mvid = (pixel_m & 0xFFFF) * 5;
> +               nvid = (0xFFFF & (~pixel_n)) + (pixel_m & 0xFFFF);
> +
> +               DRM_DEBUG_DP("rate = %d\n", rate);
> +
> +               switch (drm_dp_link_rate_to_bw_code(rate)) {
> +               case DP_LINK_BW_5_4:
> +                       nvid *= 2;
> +                       break;
> +               case DP_LINK_BW_8_1:
> +                       nvid *= 3;
> +                       break;
> +               default:
> +                       break;
> +               }
> +       }
> +
> +       DRM_DEBUG_DP("mvid=0x%x, nvid=0x%x\n", mvid, nvid);
> +       dp_write_link(catalog, REG_DP_SOFTWARE_MVID, mvid);
> +       dp_write_link(catalog, REG_DP_SOFTWARE_NVID, nvid);
> +}
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel