All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
@ 2021-02-10  6:59 huangxuesen
  2021-02-10 14:50 ` Willem de Bruijn
  0 siblings, 1 reply; 5+ messages in thread
From: huangxuesen @ 2021-02-10  6:59 UTC (permalink / raw)
  To: willemdebruijn.kernel
  Cc: davem, bpf, daniel, netdev, linux-kernel, huangxuesen,
	Willem de Bruijn, chengzhiyong, wangli

From: huangxuesen <huangxuesen@kuaishou.com>

bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
encapsulation. But that is not appropriate when pushing Ethernet header.

Add an option to further specify encap L2 type and set the inner_protocol
as ETH_P_TEB.

Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: huangxuesen <huangxuesen@kuaishou.com>
Signed-off-by: chengzhiyong <chengzhiyong@kuaishou.com>
Signed-off-by: wangli <wangli09@kuaishou.com>
---
 include/uapi/linux/bpf.h       |  5 +++++
 net/core/filter.c              | 11 ++++++++++-
 tools/include/uapi/linux/bpf.h |  5 +++++
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
  *		  Use with ENCAP_L3/L4 flags to further specify the tunnel
  *		  type; *len* is the length of the inner MAC header.
  *
+ *		* **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ *		  Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ *		  L2 type as Ethernet.
+ *
  * 		A call to this helper is susceptible to change the underlying
  * 		packet buffer. Therefore, at load time, all checks on pointers
  * 		previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
 	BPF_F_ADJ_ROOM_ENCAP_L4_GRE	= (1ULL << 3),
 	BPF_F_ADJ_ROOM_ENCAP_L4_UDP	= (1ULL << 4),
 	BPF_F_ADJ_ROOM_NO_CSUM_RESET	= (1ULL << 5),
+	BPF_F_ADJ_ROOM_ENCAP_L2_ETH	= (1ULL << 6),
 };
 
 enum {
diff --git a/net/core/filter.c b/net/core/filter.c
index 255aeee..8d1fb61 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3412,6 +3412,7 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb)
 					 BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \
 					 BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \
 					 BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \
+					 BPF_F_ADJ_ROOM_ENCAP_L2_ETH | \
 					 BPF_F_ADJ_ROOM_ENCAP_L2( \
 					  BPF_ADJ_ROOM_ENCAP_L2_MASK))
 
@@ -3448,6 +3449,10 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 		    flags & BPF_F_ADJ_ROOM_ENCAP_L4_UDP)
 			return -EINVAL;
 
+		if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH &&
+		    inner_mac_len < ETH_HLEN)
+			return -EINVAL;
+
 		if (skb->encapsulation)
 			return -EALREADY;
 
@@ -3466,7 +3471,11 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 		skb->inner_mac_header = inner_net - inner_mac_len;
 		skb->inner_network_header = inner_net;
 		skb->inner_transport_header = inner_trans;
-		skb_set_inner_protocol(skb, skb->protocol);
+
+		if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH)
+			skb_set_inner_protocol(skb, htons(ETH_P_TEB));
+		else
+			skb_set_inner_protocol(skb, skb->protocol);
 
 		skb->encapsulation = 1;
 		skb_set_network_header(skb, mac_len);
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
  *		  Use with ENCAP_L3/L4 flags to further specify the tunnel
  *		  type; *len* is the length of the inner MAC header.
  *
+ *		* **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ *		  Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ *		  L2 type as Ethernet.
+ *
  * 		A call to this helper is susceptible to change the underlying
  * 		packet buffer. Therefore, at load time, all checks on pointers
  * 		previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
 	BPF_F_ADJ_ROOM_ENCAP_L4_GRE	= (1ULL << 3),
 	BPF_F_ADJ_ROOM_ENCAP_L4_UDP	= (1ULL << 4),
 	BPF_F_ADJ_ROOM_NO_CSUM_RESET	= (1ULL << 5),
+	BPF_F_ADJ_ROOM_ENCAP_L2_ETH	= (1ULL << 6),
 };
 
 enum {
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
  2021-02-10  6:59 [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH huangxuesen
@ 2021-02-10 14:50 ` Willem de Bruijn
  2021-02-11 15:26   ` Daniel Borkmann
  0 siblings, 1 reply; 5+ messages in thread
From: Willem de Bruijn @ 2021-02-10 14:50 UTC (permalink / raw)
  To: huangxuesen
  Cc: David Miller, bpf, Daniel Borkmann, Network Development, LKML,
	huangxuesen, Willem de Bruijn, chengzhiyong, wangli,
	Alan Maguire

On Wed, Feb 10, 2021 at 1:59 AM huangxuesen <hxseverything@gmail.com> wrote:
>
> From: huangxuesen <huangxuesen@kuaishou.com>
>
> bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
> encapsulation. But that is not appropriate when pushing Ethernet header.
>
> Add an option to further specify encap L2 type and set the inner_protocol
> as ETH_P_TEB.
>
> Suggested-by: Willem de Bruijn <willemb@google.com>
> Signed-off-by: huangxuesen <huangxuesen@kuaishou.com>
> Signed-off-by: chengzhiyong <chengzhiyong@kuaishou.com>
> Signed-off-by: wangli <wangli09@kuaishou.com>

Thanks, this is exactly what I meant.

Acked-by: Willem de Bruijn <willemb@google.com>

One small point regarding Signed-off-by: It is customary to capitalize
family and given names.

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
  2021-02-10 14:50 ` Willem de Bruijn
@ 2021-02-11 15:26   ` Daniel Borkmann
  2021-02-18 16:35     ` 黄学森
  0 siblings, 1 reply; 5+ messages in thread
From: Daniel Borkmann @ 2021-02-11 15:26 UTC (permalink / raw)
  To: Willem de Bruijn, huangxuesen
  Cc: David Miller, bpf, Network Development, LKML, huangxuesen,
	Willem de Bruijn, chengzhiyong, wangli, Alan Maguire

On 2/10/21 3:50 PM, Willem de Bruijn wrote:
> On Wed, Feb 10, 2021 at 1:59 AM huangxuesen <hxseverything@gmail.com> wrote:
>>
>> From: huangxuesen <huangxuesen@kuaishou.com>
>>
>> bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
>> encapsulation. But that is not appropriate when pushing Ethernet header.
>>
>> Add an option to further specify encap L2 type and set the inner_protocol
>> as ETH_P_TEB.
>>
>> Suggested-by: Willem de Bruijn <willemb@google.com>
>> Signed-off-by: huangxuesen <huangxuesen@kuaishou.com>
>> Signed-off-by: chengzhiyong <chengzhiyong@kuaishou.com>
>> Signed-off-by: wangli <wangli09@kuaishou.com>
> 
> Thanks, this is exactly what I meant.
> 
> Acked-by: Willem de Bruijn <willemb@google.com>
> 
> One small point regarding Signed-off-by: It is customary to capitalize
> family and given names.

+1, huangxuesen, would be great if you could resubmit with capitalized names in
your SoB as well as From (both seem affected).

Thanks,
Daniel

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
  2021-02-11 15:26   ` Daniel Borkmann
@ 2021-02-18 16:35     ` 黄学森
  0 siblings, 0 replies; 5+ messages in thread
From: 黄学森 @ 2021-02-18 16:35 UTC (permalink / raw)
  To: Daniel Borkmann
  Cc: Willem de Bruijn, David Miller, bpf, Network Development, LKML,
	Willem de Bruijn, chengzhiyong, wangli, Alan Maguire

Thanks Daniel and Willem!

So sorry to reply to you late for I just took the Chinese Spring Festival vacation.

I will resubmit this patch.

Thanks again!

> 2021年2月11日 下午11:26，Daniel Borkmann <daniel@iogearbox.net> 写道：
> 
> On 2/10/21 3:50 PM, Willem de Bruijn wrote:
>> On Wed, Feb 10, 2021 at 1:59 AM huangxuesen <hxseverything@gmail.com> wrote:
>>> 
>>> From: huangxuesen <huangxuesen@kuaishou.com>
>>> 
>>> bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
>>> encapsulation. But that is not appropriate when pushing Ethernet header.
>>> 
>>> Add an option to further specify encap L2 type and set the inner_protocol
>>> as ETH_P_TEB.
>>> 
>>> Suggested-by: Willem de Bruijn <willemb@google.com>
>>> Signed-off-by: huangxuesen <huangxuesen@kuaishou.com>
>>> Signed-off-by: chengzhiyong <chengzhiyong@kuaishou.com>
>>> Signed-off-by: wangli <wangli09@kuaishou.com>
>> Thanks, this is exactly what I meant.
>> Acked-by: Willem de Bruijn <willemb@google.com>
>> One small point regarding Signed-off-by: It is customary to capitalize
>> family and given names.
> 
> +1, huangxuesen, would be great if you could resubmit with capitalized names in
> your SoB as well as From (both seem affected).
> 
> Thanks,
> Daniel


^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
@ 2021-02-18 16:39 Xuesen Huang
  0 siblings, 0 replies; 5+ messages in thread
From: Xuesen Huang @ 2021-02-18 16:39 UTC (permalink / raw)
  To: willemdebruijn.kernel
  Cc: davem, bpf, daniel, netdev, linux-kernel, Xuesen Huang,
	Willem de Bruijn, Zhiyong Cheng, Li Wang

From: Xuesen Huang <huangxuesen@kuaishou.com>

bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
encapsulation. But that is not appropriate when pushing Ethernet header.

Add an option to further specify encap L2 type and set the inner_protocol
as ETH_P_TEB.

Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xuesen Huang <huangxuesen@kuaishou.com>
Signed-off-by: Zhiyong Cheng <chengzhiyong@kuaishou.com>
Signed-off-by: Li Wang <wangli09@kuaishou.com>
---
 include/uapi/linux/bpf.h       |  5 +++++
 net/core/filter.c              | 11 ++++++++++-
 tools/include/uapi/linux/bpf.h |  5 +++++
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
  *		  Use with ENCAP_L3/L4 flags to further specify the tunnel
  *		  type; *len* is the length of the inner MAC header.
  *
+ *		* **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ *		  Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ *		  L2 type as Ethernet.
+ *
  * 		A call to this helper is susceptible to change the underlying
  * 		packet buffer. Therefore, at load time, all checks on pointers
  * 		previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
 	BPF_F_ADJ_ROOM_ENCAP_L4_GRE	= (1ULL << 3),
 	BPF_F_ADJ_ROOM_ENCAP_L4_UDP	= (1ULL << 4),
 	BPF_F_ADJ_ROOM_NO_CSUM_RESET	= (1ULL << 5),
+	BPF_F_ADJ_ROOM_ENCAP_L2_ETH	= (1ULL << 6),
 };
 
 enum {
diff --git a/net/core/filter.c b/net/core/filter.c
index 255aeee..8d1fb61 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3412,6 +3412,7 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb)
 					 BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \
 					 BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \
 					 BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \
+					 BPF_F_ADJ_ROOM_ENCAP_L2_ETH | \
 					 BPF_F_ADJ_ROOM_ENCAP_L2( \
 					  BPF_ADJ_ROOM_ENCAP_L2_MASK))
 
@@ -3448,6 +3449,10 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 		    flags & BPF_F_ADJ_ROOM_ENCAP_L4_UDP)
 			return -EINVAL;
 
+		if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH &&
+		    inner_mac_len < ETH_HLEN)
+			return -EINVAL;
+
 		if (skb->encapsulation)
 			return -EALREADY;
 
@@ -3466,7 +3471,11 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 		skb->inner_mac_header = inner_net - inner_mac_len;
 		skb->inner_network_header = inner_net;
 		skb->inner_transport_header = inner_trans;
-		skb_set_inner_protocol(skb, skb->protocol);
+
+		if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH)
+			skb_set_inner_protocol(skb, htons(ETH_P_TEB));
+		else
+			skb_set_inner_protocol(skb, skb->protocol);
 
 		skb->encapsulation = 1;
 		skb_set_network_header(skb, mac_len);
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
  *		  Use with ENCAP_L3/L4 flags to further specify the tunnel
  *		  type; *len* is the length of the inner MAC header.
  *
+ *		* **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ *		  Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ *		  L2 type as Ethernet.
+ *
  * 		A call to this helper is susceptible to change the underlying
  * 		packet buffer. Therefore, at load time, all checks on pointers
  * 		previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
 	BPF_F_ADJ_ROOM_ENCAP_L4_GRE	= (1ULL << 3),
 	BPF_F_ADJ_ROOM_ENCAP_L4_UDP	= (1ULL << 4),
 	BPF_F_ADJ_ROOM_NO_CSUM_RESET	= (1ULL << 5),
+	BPF_F_ADJ_ROOM_ENCAP_L2_ETH	= (1ULL << 6),
 };
 
 enum {
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-02-18 18:50 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-10  6:59 [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH huangxuesen
2021-02-10 14:50 ` Willem de Bruijn
2021-02-11 15:26   ` Daniel Borkmann
2021-02-18 16:35     ` 黄学森
2021-02-18 16:39 Xuesen Huang

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.