AP mode firmware crash on QCA9880-BR4A

AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hello,

I have two devices with chips that are supported by ath10k.
One uses a QCA9880-BR4A, the other has a QCA9558-AT4A.

The device with QCA9558-AT4A is working fine.
However, the other one is experiencing firmware crashes.
You can find the dmesg output below and here: [0].

Those crashes are firmware related. Here is what I have tested on QCA9880-BR4A:
- firmware-2.bin_10.1.467.bin is NOT crashing
- firmware-3.bin_10.2.2.39.bin is crashing
- firmware-4.bin_10.2.4.bin is also crashing
- firmware-5.bin_10.2.4.70-2 is crashing as well

As a side-note: Both devices are running OpenWrt.
I am pretty sure that my caldata is correct on both devices.
Also I am not the only one affected by this bug, see [1]

Please let me know if more information is required.


Regards,
Martin

[0] https://paste.kde.org/pzcauwdpb
[1] https://dev.openwrt.org/ticket/19167


[   11.544000] Loading modules backported from Linux version
master-2015-06-22-0-g4732c92
[   11.552000] Backport generated by backports.git backports-20150626-0-gc1a4168
[   11.724000] cfg80211: Calling CRDA to update world regulatory domain
[   11.732000] cfg80211: World regulatory domain updated:
[   11.736000] cfg80211:  DFS Master region: unset
[   11.740000] cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.748000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[   11.756000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[   11.764000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[   11.772000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.784000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.792000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[   11.800000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[   11.808000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000
KHz), (N/A, 0 mBm), (N/A)
[   12.392000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   12.396000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[   12.404000] ath10k_pci 0000:02:00.0: pci irq legacy interrupts 0
irq_mode 0 reset_mode 0
[   12.600000] ath10k_pci 0000:02:00.0: Direct firmware load for
ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[   12.608000] ath10k_pci 0000:02:00.0: Falling back to user helper
[   14.124000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[   14.132000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[   14.228000] ath: EEPROM regdomain: 0x833a
[   14.228000] ath: EEPROM indicates we should expect a country code
[   14.228000] ath: doing EEPROM country->regdmn map search
[   14.228000] ath: country maps to regdmn code: 0x37
[   14.228000] ath: Country alpha2 being used: GB
[   14.228000] ath: Regpair used: 0x37
...
[   28.952000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
adba4793-5d11-4002-b3ac-9be37592db2e)
[   28.960000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[   28.972000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[   28.992000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[   28.996000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[   29.004000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[   29.100000] ieee80211 phy0: Hardware restart was requested
[   29.304000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   29.308000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   29.428000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   29.432000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   29.556000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   29.560000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   29.976000] br-lan: port 2(wlan1) entered forwarding state
[   30.288000] br-lan: port 3(wlan0) entered forwarding state
[   31.128000] ath10k_pci 0000:02:00.0: device successfully recovered
[   31.776000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
405c7667-677e-4f3f-884c-32d6d379e41e)
[   31.784000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[   31.796000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[   31.816000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[   31.824000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[   31.832000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[   31.928000] ieee80211 phy0: Hardware restart was requested
[   33.460000] ath10k_pci 0000:02:00.0: device successfully recovered
[   34.108000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
5c29bde5-4bc1-4523-aa72-93674082f1e4)
[   34.116000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[   34.128000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[   34.148000] ath10k_warn: 6 callbacks suppressed
[   34.148000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[   34.156000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[   34.168000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[   34.264000] ieee80211 phy0: Hardware restart was requested
[   34.456000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   34.460000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   34.568000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   34.572000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   34.680000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[   34.684000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[   35.828000] ath10k_pci 0000:02:00.0: device successfully recovered
[   36.476000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
1b3f8e65-d7b3-4ad4-a243-da91b6903627)
[   36.484000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[   36.496000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[   36.516000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[   36.524000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[   36.532000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[   36.628000] ieee80211 phy0: Hardware restart was requested
[   38.160000] ath10k_pci 0000:02:00.0: device successfully recovered
...

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 12 July 2015 at 22:05, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hello,
>
> I have two devices with chips that are supported by ath10k.
> One uses a QCA9880-BR4A, the other has a QCA9558-AT4A.
>
> The device with QCA9558-AT4A is working fine.
> However, the other one is experiencing firmware crashes.
> You can find the dmesg output below and here: [0].
>
> Those crashes are firmware related. Here is what I have tested on QCA9880-BR4A:
> - firmware-2.bin_10.1.467.bin is NOT crashing
> - firmware-3.bin_10.2.2.39.bin is crashing
> - firmware-4.bin_10.2.4.bin is also crashing
> - firmware-5.bin_10.2.4.70-2 is crashing as well
>
> As a side-note: Both devices are running OpenWrt.
> I am pretty sure that my caldata is correct on both devices.
> Also I am not the only one affected by this bug, see [1]

Thanks for testing and reporting it back to upstream ;-) I rarely look
at OpenWRT buglist.


>
> Please let me know if more information is required.

It is always good to see either debugs or traces to know what happened
before a crash. Your build doesn't seem to contain either at the
moment though.


>
>
> Regards,
> Martin
>
> [0] https://paste.kde.org/pzcauwdpb
> [1] https://dev.openwrt.org/ticket/19167
>
>
> [   11.544000] Loading modules backported from Linux version
> master-2015-06-22-0-g4732c92
> [   11.552000] Backport generated by backports.git backports-20150626-0-gc1a4168

I see you're using a pretty recent openwrt snapshot.

By looking at SVN changesets I can see that otp bypass patch has been
removed[1] in favour of caldata approach[2]. With this OTP is not even
executed. If I assume the caldata extracted from flash partition isn't
complete then it could lead to firmware crash.

[1]: https://dev.openwrt.org/changeset/46245
[2]: https://dev.openwrt.org/changeset/46244

Can you please try do the following:

 cd /lib/firmware/ath10k/QCA988X/hw2.0/
 mv caldata.bin board.bin
 rmmod ath10k_pci
 echo 1 > /sys/module/ath10k_core/parameters/skip_otp
 modprobe ath10k_pci
 wifi

(not tested; could include typos/errors but should be enough for you
to get the idea)


[...]
> [   28.952000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
> adba4793-5d11-4002-b3ac-9be37592db2e)
> [   28.960000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
> 0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
> [   28.972000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
> dfs 1 testmode 1
> [   28.992000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100804: -16
> [   28.996000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
> address for firmware address 4: -16
> [   29.004000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
> [   29.100000] ieee80211 phy0: Hardware restart was requested
> [   29.304000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [   29.308000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [   29.428000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [   29.432000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [   29.556000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [   29.560000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16

This looks hairy. Device crashes so hard it's impossible to read out
the crash dump..


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

thanks for the quick reply :-)

On Mon, Jul 13, 2015 at 7:57 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> It is always good to see either debugs or traces to know what happened
> before a crash. Your build doesn't seem to contain either at the
> moment though.
This is what I enabled for the two new logs you can see below:
# cat /sys/module/ath10k_core/parameters/debug_mask
1074

> I see you're using a pretty recent openwrt snapshot.
Correct, it is a trunk build from yesterday afternoon.

> If I assume the caldata extracted from flash partition isn't
> complete then it could lead to firmware crash.
I can see that at least the country code ("GB") and mac address are
read correctly from dumped caldata.
That doesn't mean that it HAS to be correct, but it can't be total
garbage either.

>  cd /lib/firmware/ath10k/QCA988X/hw2.0/
>  mv caldata.bin board.bin
>  rmmod ath10k_pci
>  echo 1 > /sys/module/ath10k_core/parameters/skip_otp
>  modprobe ath10k_pci
>  wifi
The first log [0] you can see below has skip_otp at the default value
and it uses the caldata as supplied through the standard firmware
mechanism.
The second log [1] you can see below is with skip_otp set to 1 and
caldata moved to board.bin (mac address and country code were still
correct in that case).
Each log was produced with: wifi up && sleep 5s && wifi down && dmesg
(both have the mac address masked - everything else is untouched)

Please let me know if I need to change the debug mask or if you need
more information.

Regards,
Martin


[0] https://paste.kde.org/pj3ykduuq
[1] https://paste.kde.org/pyytzladl

Log #0 (no changes to caldata/board.bin, only debug enabled):
[  441.764000] ath10k_pci 0000:02:00.0: boot hif power up
[  441.764000] ath10k_pci 0000:02:00.0: boot 988x chip reset
[  441.764000] ath10k_pci 0000:02:00.0: boot warm reset
[  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  441.796000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  441.796000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  441.804000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  441.816000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  441.816000] ath10k_pci 0000:02:00.0: boot target initialised
[  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  441.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  441.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  441.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  441.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  441.852000] ath10k_pci 0000:02:00.0: boot target initialised
[  441.852000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  441.852000] ath10k_pci 0000:02:00.0: boot chip reset complete (warm)
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  441.864000] ath10k_pci 0000:02:00.0: bmi start
[  441.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
[  441.868000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
[  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
[  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
[  441.872000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
[  441.872000] ath10k_pci 0000:02:00.0: boot cal file downloaded
[  441.872000] ath10k_pci 0000:02:00.0: boot using calibration mode file
[  441.872000] ath10k_pci 0000:02:00.0: boot uploading firmware image
c03afc64 len 237784 mode normal
[  441.872000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc03afc64 length 237784
[  441.872000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[  441.872000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc03afc64
length 237784
[  442.896000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[  442.896000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
[  442.896000] ath10k_pci 0000:02:00.0: bmi done
[  442.896000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
[  442.896000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
[  442.896000] ath10k_pci 0000:02:00.0: boot hif start
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
pipe 0 dl pipe 1 eid 0 ready
[  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
0 TX flow control disabled
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
not allocate target credits
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
pipe 4 dl pipe 1 eid 1 ready
[  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
[  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
3 dl pipe 2 eid 2 ready
[  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
[  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
07 00 00 00 07 00 00 00 09 00 00 00  ................
[  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
0a 00 00 00 03 00 00 00 00 00 00 00  ................
[  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[  442.900000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
num_unit_info 2 unit size 440 actual units 145
[  442.900000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
[  442.900000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
[  442.900000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5c80000
[  442.900000] ath10k_pci 0000:02:00.0: wmi init 10.2
[  442.920000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
[  442.924000] ath10k_pci 0000:02:00.0: htt target version 2.1
[  442.924000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
[  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
[  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
[  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
[  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
maxpower 40 regpower 40 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
maxpower 54 regpower 54 antenna 0 mode 0
[  442.932000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
[  442.940000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
[  442.940000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
[  442.940000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
subtype 0 macaddr c8:pr:iv:at:e0:c1
[  442.940000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
[  442.940000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
[  442.940000] ath10k_pci 0000:02:00.0: mac txpower 0
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 0
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 0
[  442.940000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
[  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
[  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  442.940000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  442.944000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  442.948000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  442.956000] device wlan0 entered promiscuous mode
[  442.960000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  442.960000] ath10k_pci 0000:02:00.0: wmi 10x start scan
[  442.960000] ath10k_pci 0000:02:00.0: scan event started type 1
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
(1)
[  442.960000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
[  442.964000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
[  442.964000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
cmd_flags 0 noise_floor 0 rx_clear_count 1535798 cycle_count 4656037
[  443.112000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[  443.112000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
cmd_flags 1 noise_floor -102 rx_clear_count 1535798 cycle_count
17506798
[  443.116000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
[  443.116000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
cmd_flags 0 noise_floor 0 rx_clear_count 1536013 cycle_count 17859909
[  443.260000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[  443.260000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
cmd_flags 1 noise_floor -101 rx_clear_count 1543161 cycle_count
30710758
[  443.260000] ath10k_pci 0000:02:00.0: scan event completed type 2
reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[  443.772000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85d316b0
[  443.772000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  443.772000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85d316b0 vdev_id 0
[  443.772000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
5180 phymode 11ac-vht80
[  443.772000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
[  443.780000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
[  443.780000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[  443.780000] ath10k_pci 0000:02:00.0: mac txpower 20
[  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[  443.780000] ath10k_pci 0000:02:00.0: mac chanctx change freq 5180
width 3 ptr 85d316b0 changed 2
[  443.780000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
[  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
[  443.780000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
[  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
[  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
[  443.780000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
[  443.780000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
id 0 bssid c8:pr:iv:at:e0:c1
[  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 up
[  443.780000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[  443.780000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
[  443.780000] ath10k_pci 0000:02:00.0: mac txpower 20
[  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[  443.780000] br-lan: port 2(wlan0) entered forwarding state
[  443.784000] br-lan: port 2(wlan0) entered forwarding state
[  443.792000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
[  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
[  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
[  443.804000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  443.880000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  443.900000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
[  444.204000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
d6027db2-e965-469f-962c-9b70627c413d)
[  444.212000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
[  444.224000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[  444.244000] ath10k_warn: 2 callbacks suppressed
[  444.244000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[  444.252000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[  444.260000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[  444.268000] ath10k_pci 0000:02:00.0: boot hif stop
[  444.268000] ath10k_pci 0000:02:00.0: boot warm reset
[  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.300000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.300000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.308000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.320000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.320000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.336000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.336000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.344000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.356000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.356000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.356000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  444.356000] ieee80211 phy0: Hardware restart was requested
[  444.360000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[  444.360000] ath10k_pci 0000:02:00.0: boot hif stop
[  444.360000] ath10k_pci 0000:02:00.0: boot warm reset
[  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.392000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.392000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.400000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.412000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.412000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.428000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.428000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.436000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.448000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.448000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.448000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  444.448000] ath10k_pci 0000:02:00.0: boot hif power down
[  444.448000] ath10k_pci 0000:02:00.0: boot hif power up
[  444.448000] ath10k_pci 0000:02:00.0: boot 988x chip reset
[  444.448000] ath10k_pci 0000:02:00.0: boot warm reset
[  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.480000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.480000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.488000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.500000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.500000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.516000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.516000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.524000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.536000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.536000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.536000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.548000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[  444.552000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[  444.560000] ath10k_pci 0000:02:00.0: boot warm reset
[  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.592000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.592000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.600000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.612000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.612000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.628000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.628000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.636000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.648000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.648000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.648000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.660000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[  444.664000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[  444.672000] ath10k_pci 0000:02:00.0: boot warm reset
[  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.704000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.704000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.712000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.724000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.724000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.740000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.740000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.748000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.760000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.760000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.760000] ath10k_pci 0000:02:00.0: boot warm reset complete
[  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.772000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[  444.776000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[  444.784000] ath10k_pci 0000:02:00.0: boot cold reset
[  444.832000] ath10k_pci 0000:02:00.0: boot cold reset complete
[  444.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[  444.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
[  444.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
[  444.852000] ath10k_pci 0000:02:00.0: boot target initialised
[  444.852000] ath10k_pci 0000:02:00.0: boot qca988x chip reset complete (cold)
[  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a69f0000
[  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a687c000
[  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a69f1000
[  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f2000
[  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f3000
[  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a69f4000
[  444.860000] ath10k_pci 0000:02:00.0: bmi start
[  444.860000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
[  444.864000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
[  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
[  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
[  444.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
[  444.868000] ath10k_pci 0000:02:00.0: boot cal file downloaded
[  444.868000] ath10k_pci 0000:02:00.0: boot using calibration mode file
[  444.868000] ath10k_pci 0000:02:00.0: boot uploading firmware image
c03afc64 len 237784 mode normal
[  444.868000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc03afc64 length 237784
[  444.868000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[  444.868000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc03afc64
length 237784
[  445.788000] br-lan: port 2(wlan0) entered forwarding state
[  445.876000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[  445.880000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
[  445.880000] ath10k_pci 0000:02:00.0: bmi done
[  445.880000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
[  445.880000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
[  445.880000] ath10k_pci 0000:02:00.0: boot hif start
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
pipe 0 dl pipe 1 eid 0 ready
[  445.880000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
0 TX flow control disabled
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
not allocate target credits
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
pipe 4 dl pipe 1 eid 1 ready
[  445.880000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
[  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
3 dl pipe 2 eid 2 ready
[  445.884000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
[  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
07 00 00 00 07 00 00 00 09 00 00 00  ................
[  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
0a 00 00 00 03 00 00 00 00 00 00 00  ................
[  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[  445.884000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
num_unit_info 2 unit size 440 actual units 145
[  445.884000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
[  445.884000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
[  445.884000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x6300000
[  445.884000] ath10k_pci 0000:02:00.0: wmi init 10.2
[  445.904000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
[  445.908000] ath10k_pci 0000:02:00.0: htt target version 2.1
[  445.908000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
[  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
[  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
[  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
[  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
maxpower 40 regpower 40 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
maxpower 54 regpower 54 antenna 0 mode 0
[  445.916000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
[  445.924000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
[  445.924000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
[  445.924000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
subtype 0 macaddr c8:pr:iv:at:e0:c1
[  445.924000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
[  445.924000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
[  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
[  445.924000] ath10k_pci 0000:02:00.0: mac txpower 20
[  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[  445.924000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85d316b0
[  445.924000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  445.924000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85d316b0 vdev_id 0
[  445.924000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
5180 phymode 11ac-vht80
[  445.924000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
[  445.932000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[  445.932000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  445.932000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
[  445.932000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
[  445.932000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
id 0 bssid c8:pr:iv:at:e0:c1
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 up
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[  445.932000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
[  445.932000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[  445.932000] ath10k_pci 0000:02:00.0: mac txpower 20
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
[  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
[  445.932000] ath10k_pci 0000:02:00.0: device successfully recovered

Log #1 (caldata moved, skip_otp and debug are enabled):
[ 1265.708000] ath10k_pci 0000:02:00.0: boot hif power up
[ 1265.708000] ath10k_pci 0000:02:00.0: boot 988x chip reset
[ 1265.708000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1265.740000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1265.740000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1265.748000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1265.760000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1265.760000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1265.776000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1265.776000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1265.784000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1265.796000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1265.796000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1265.796000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot chip reset complete (warm)
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1265.808000] ath10k_pci 0000:02:00.0: bmi start
[ 1265.808000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: boot did not find a
calibration file, try DT next: -11
[ 1265.812000] ath10k_pci 0000:02:00.0: boot did not find DT entry,
try OTP next: -2
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
[ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
[ 1265.816000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
[ 1265.816000] ath10k_pci 0000:02:00.0: boot upload otp to 0x1234 len 7205
[ 1265.816000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc0bc9034 length 7205
[ 1265.816000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[ 1265.816000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bc9034
length 7204
[ 1265.840000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0x860d9cc0 length 4
[ 1265.840000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[ 1265.840000] ath10k_pci 0000:02:00.0: bmi execute address 0x1234 param 0x0
[ 1265.960000] ath10k_pci 0000:02:00.0: bmi execute result 0x2
[ 1265.960000] ath10k_pci 0000:02:00.0: boot otp execute result 2
[ 1265.960000] ath10k_pci 0000:02:00.0: boot using calibration mode otp
[ 1265.960000] ath10k_pci 0000:02:00.0: boot uploading firmware image
c0bcac64 len 237784 mode normal
[ 1265.960000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc0bcac64 length 237784
[ 1265.960000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[ 1265.960000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bcac64
length 237784
[ 1266.980000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[ 1266.984000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
[ 1266.984000] ath10k_pci 0000:02:00.0: bmi done
[ 1266.984000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
[ 1266.984000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
[ 1266.984000] ath10k_pci 0000:02:00.0: boot hif start
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
pipe 0 dl pipe 1 eid 0 ready
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
0 TX flow control disabled
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
not allocate target credits
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
pipe 4 dl pipe 1 eid 1 ready
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
3 dl pipe 2 eid 2 ready
[ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
07 00 00 00 07 00 00 00 09 00 00 00  ................
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
0a 00 00 00 03 00 00 00 00 00 00 00  ................
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
num_unit_info 2 unit size 440 actual units 145
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
[ 1266.988000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5cf0000
[ 1266.988000] ath10k_pci 0000:02:00.0: wmi init 10.2
[ 1267.008000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
[ 1267.012000] ath10k_pci 0000:02:00.0: htt target version 2.1
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
[ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
maxpower 40 regpower 40 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
maxpower 54 regpower 54 antenna 0 mode 0
[ 1267.020000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
[ 1267.028000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
[ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
[ 1267.028000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
subtype 0 macaddr c8:pr:iv:at:e0:c1
[ 1267.028000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
[ 1267.028000] ath10k_pci 0000:02:00.0: mac txpower 0
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 0
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 0
[ 1267.028000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
[ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.028000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.032000] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[ 1267.036000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.044000] device wlan3 entered promiscuous mode
[ 1267.048000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.052000] ath10k_pci 0000:02:00.0: wmi 10x start scan
[ 1267.052000] ath10k_pci 0000:02:00.0: scan event started type 1
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
(1)
[ 1267.052000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
[ 1267.056000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
[ 1267.056000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
cmd_flags 0 noise_floor 0 rx_clear_count 1529522 cycle_count 4629099
[ 1267.200000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[ 1267.200000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
cmd_flags 1 noise_floor -102 rx_clear_count 1529522 cycle_count
17479596
[ 1267.204000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
[ 1267.204000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
cmd_flags 0 noise_floor 0 rx_clear_count 1529952 cycle_count 17832531
[ 1267.352000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[ 1267.352000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
cmd_flags 1 noise_floor -102 rx_clear_count 1535112 cycle_count
30684260
[ 1267.352000] ath10k_pci 0000:02:00.0: scan event completed type 2
reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
[ 1267.860000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85d316b0
[ 1267.860000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.860000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85d316b0 vdev_id 0
[ 1267.860000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
5180 phymode 11ac-vht80
[ 1267.860000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
[ 1267.868000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
[ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[ 1267.868000] ath10k_pci 0000:02:00.0: mac txpower 20
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[ 1267.868000] ath10k_pci 0000:02:00.0: mac chanctx change freq 5180
width 3 ptr 85d316b0 changed 2
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
[ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
[ 1267.868000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
[ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
id 0 bssid c8:pr:iv:at:e0:c1
[ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 up
[ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[ 1267.868000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
[ 1267.868000] ath10k_pci 0000:02:00.0: mac txpower 20
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[ 1267.868000] br-lan: port 2(wlan3) entered forwarding state
[ 1267.872000] br-lan: port 2(wlan3) entered forwarding state
[ 1267.880000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
[ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
[ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
[ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
[ 1267.892000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1267.968000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1267.984000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
[ 1268.292000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
2b2c06d2-74c0-4c87-932c-7852173faa09)
[ 1268.300000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
[ 1268.312000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
[ 1268.332000] ath10k_warn: 6 callbacks suppressed
[ 1268.332000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100804: -16
[ 1268.340000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
[ 1268.352000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
[ 1268.360000] ath10k_pci 0000:02:00.0: boot hif stop
[ 1268.360000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.392000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.392000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.400000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.412000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.412000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.428000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.428000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.436000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.448000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.448000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.448000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1268.448000] ieee80211 phy3: Hardware restart was requested
[ 1268.452000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[ 1268.452000] ath10k_pci 0000:02:00.0: boot hif stop
[ 1268.452000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.484000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.484000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.492000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.504000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.504000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.520000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.520000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.528000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.540000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.540000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.540000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1268.540000] ath10k_pci 0000:02:00.0: boot hif power down
[ 1268.540000] ath10k_pci 0000:02:00.0: boot hif power up
[ 1268.540000] ath10k_pci 0000:02:00.0: boot 988x chip reset
[ 1268.540000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.572000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.572000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.580000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.592000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.592000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.608000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.608000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.616000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.628000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.628000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.628000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.640000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[ 1268.644000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[ 1268.652000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.684000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.684000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.692000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.704000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.704000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.720000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.720000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.728000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.740000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.740000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.740000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.752000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[ 1268.756000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[ 1268.764000] ath10k_pci 0000:02:00.0: boot warm reset
[ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.796000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.796000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.804000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.816000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.816000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.852000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.852000] ath10k_pci 0000:02:00.0: boot warm reset complete
[ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.864000] ath10k_pci 0000:02:00.0: failed to read diag value at
0x1c100800: -16
[ 1268.868000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
[ 1268.876000] ath10k_pci 0000:02:00.0: boot cold reset
[ 1268.924000] ath10k_pci 0000:02:00.0: boot cold reset complete
[ 1268.924000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
[ 1268.924000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.932000] ath10k_pci 0000:02:00.0: boot target indicator 0
[ 1268.944000] ath10k_pci 0000:02:00.0: boot target indicator 2
[ 1268.944000] ath10k_pci 0000:02:00.0: boot target initialised
[ 1268.944000] ath10k_pci 0000:02:00.0: boot qca988x chip reset complete (cold)
[ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a5ca0000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
512 base_addr a6918000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
128 base_addr a7864000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a69f7000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6810000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a69f4000
[ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
2 base_addr a6828000
[ 1268.952000] ath10k_pci 0000:02:00.0: bmi start
[ 1268.952000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: boot did not find a
calibration file, try DT next: -11
[ 1268.956000] ath10k_pci 0000:02:00.0: boot did not find DT entry,
try OTP next: -2
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
[ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
[ 1268.960000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
[ 1268.960000] ath10k_pci 0000:02:00.0: boot upload otp to 0x1234 len 7205
[ 1268.960000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc0bc9034 length 7205
[ 1268.960000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[ 1268.960000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bc9034
length 7204
[ 1268.984000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0x86937d70 length 4
[ 1268.984000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[ 1268.984000] ath10k_pci 0000:02:00.0: bmi execute address 0x1234 param 0x0
[ 1269.044000] ath10k_pci 0000:02:00.0: bmi execute result 0x2
[ 1269.044000] ath10k_pci 0000:02:00.0: boot otp execute result 2
[ 1269.044000] ath10k_pci 0000:02:00.0: boot using calibration mode otp
[ 1269.044000] ath10k_pci 0000:02:00.0: boot uploading firmware image
c0bcac64 len 237784 mode normal
[ 1269.044000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc0bcac64 length 237784
[ 1269.044000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
[ 1269.044000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bcac64
length 237784
[ 1269.876000] br-lan: port 2(wlan3) entered forwarding state
[ 1270.052000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
[ 1270.052000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
[ 1270.052000] ath10k_pci 0000:02:00.0: bmi done
[ 1270.052000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
[ 1270.052000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
[ 1270.052000] ath10k_pci 0000:02:00.0: boot hif start
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
pipe 0 dl pipe 1 eid 0 ready
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
0 TX flow control disabled
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
not allocate target credits
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
pipe 4 dl pipe 1 eid 1 ready
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
3 dl pipe 2 eid 2 ready
[ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
07 00 00 00 07 00 00 00 09 00 00 00  ................
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
0a 00 00 00 03 00 00 00 00 00 00 00  ................
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
num_unit_info 2 unit size 440 actual units 145
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
[ 1270.056000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5c60000
[ 1270.056000] ath10k_pci 0000:02:00.0: wmi init 10.2
[ 1270.076000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
[ 1270.080000] ath10k_pci 0000:02:00.0: htt target version 2.1
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi disable pktlog
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
[ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
maxpower 40 regpower 40 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
maxpower 54 regpower 54 antenna 0 mode 0
[ 1270.088000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
[ 1270.096000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
[ 1270.096000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
[ 1270.096000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
subtype 0 macaddr c8:pr:iv:at:e0:c1
[ 1270.096000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
[ 1270.096000] ath10k_pci 0000:02:00.0: mac txpower 20
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[ 1270.096000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85d316b0
[ 1270.096000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1270.096000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85d316b0 vdev_id 0
[ 1270.096000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
5180 phymode 11ac-vht80
[ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
[ 1270.104000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
[ 1270.104000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1270.104000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
[ 1270.104000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
id 0 bssid c8:pr:iv:at:e0:c1
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 up
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
[ 1270.104000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
[ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
[ 1270.104000] ath10k_pci 0000:02:00.0: mac txpower 20
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
[ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
[ 1270.104000] ath10k_pci 0000:02:00.0: device successfully recovered
[ 1270.112000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
needed? 0 allowed? 1

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Sebastian Gottschall]

you can reproduce this issue with a standard compex wle 600v card. its a 
on board eeprom card. so calibration issues will not occur.
but this card will also crash with recent firmwares on any platform. but 
(and now the big thing) it will only happen in ap mode.
if you initialize it in station mode, it will work

Sebastian

Am 13.07.2015 um 21:32 schrieb Martin Blumenstingl:
> Hi Michal,
>
> thanks for the quick reply :-)
>
> On Mon, Jul 13, 2015 at 7:57 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> It is always good to see either debugs or traces to know what happened
>> before a crash. Your build doesn't seem to contain either at the
>> moment though.
> This is what I enabled for the two new logs you can see below:
> # cat /sys/module/ath10k_core/parameters/debug_mask
> 1074
>
>> I see you're using a pretty recent openwrt snapshot.
> Correct, it is a trunk build from yesterday afternoon.
>
>> If I assume the caldata extracted from flash partition isn't
>> complete then it could lead to firmware crash.
> I can see that at least the country code ("GB") and mac address are
> read correctly from dumped caldata.
> That doesn't mean that it HAS to be correct, but it can't be total
> garbage either.
>
>>   cd /lib/firmware/ath10k/QCA988X/hw2.0/
>>   mv caldata.bin board.bin
>>   rmmod ath10k_pci
>>   echo 1 > /sys/module/ath10k_core/parameters/skip_otp
>>   modprobe ath10k_pci
>>   wifi
> The first log [0] you can see below has skip_otp at the default value
> and it uses the caldata as supplied through the standard firmware
> mechanism.
> The second log [1] you can see below is with skip_otp set to 1 and
> caldata moved to board.bin (mac address and country code were still
> correct in that case).
> Each log was produced with: wifi up && sleep 5s && wifi down && dmesg
> (both have the mac address masked - everything else is untouched)
>
> Please let me know if I need to change the debug mask or if you need
> more information.
>
> Regards,
> Martin
>
>
> [0] https://paste.kde.org/pj3ykduuq
> [1] https://paste.kde.org/pyytzladl
>
> Log #0 (no changes to caldata/board.bin, only debug enabled):
> [  441.764000] ath10k_pci 0000:02:00.0: boot hif power up
> [  441.764000] ath10k_pci 0000:02:00.0: boot 988x chip reset
> [  441.764000] ath10k_pci 0000:02:00.0: boot warm reset
> [  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  441.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  441.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  441.796000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  441.796000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  441.804000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  441.816000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  441.816000] ath10k_pci 0000:02:00.0: boot target initialised
> [  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  441.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  441.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  441.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  441.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  441.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  441.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  441.852000] ath10k_pci 0000:02:00.0: boot target initialised
> [  441.852000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  441.852000] ath10k_pci 0000:02:00.0: boot chip reset complete (warm)
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  441.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  441.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  441.864000] ath10k_pci 0000:02:00.0: bmi start
> [  441.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
> [  441.868000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
> [  441.868000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
> [  441.868000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
> [  441.872000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
> [  441.872000] ath10k_pci 0000:02:00.0: boot cal file downloaded
> [  441.872000] ath10k_pci 0000:02:00.0: boot using calibration mode file
> [  441.872000] ath10k_pci 0000:02:00.0: boot uploading firmware image
> c03afc64 len 237784 mode normal
> [  441.872000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc03afc64 length 237784
> [  441.872000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [  441.872000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc03afc64
> length 237784
> [  442.896000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [  442.896000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
> [  442.896000] ath10k_pci 0000:02:00.0: bmi done
> [  442.896000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
> [  442.896000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
> [  442.896000] ath10k_pci 0000:02:00.0: boot hif start
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
> pipe 0 dl pipe 1 eid 0 ready
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
> 0 TX flow control disabled
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
> not allocate target credits
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
> pipe 4 dl pipe 1 eid 1 ready
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
> eid 1 TX flow control disabled
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
> 3 dl pipe 2 eid 2 ready
> [  442.900000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
> [  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
> 07 00 00 00 07 00 00 00 09 00 00 00  ................
> [  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
> 0a 00 00 00 03 00 00 00 00 00 00 00  ................
> [  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [  442.900000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [  442.900000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
> num_unit_info 2 unit size 440 actual units 145
> [  442.900000] ath10k_pci 0000:02:00.0: wmi event service ready
> min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
> vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
> 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
> 0x0000833a num_mem_reqs 0x00000001
> [  442.900000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
> [  442.900000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
> requested, addr 0x5c80000
> [  442.900000] ath10k_pci 0000:02:00.0: wmi init 10.2
> [  442.920000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
> 1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
> [  442.924000] ath10k_pci 0000:02:00.0: htt target version 2.1
> [  442.924000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
> [  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
> [  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
> [  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
> [  442.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
> maxpower 40 regpower 40 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
> maxpower 54 regpower 54 antenna 0 mode 0
> [  442.932000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
> 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
> [  442.940000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
> [  442.940000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
> interface) type 1 subtype 0 bcnmode single-buf
> [  442.940000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
> subtype 0 macaddr c8:pr:iv:at:e0:c1
> [  442.940000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
> [  442.940000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
> peer_addr c8:pr:iv:at:e0:c1
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
> [  442.940000] ath10k_pci 0000:02:00.0: mac txpower 0
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 0
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 0
> [  442.940000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
> [  442.940000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
> [  442.940000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  442.940000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  442.940000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  442.944000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [  442.948000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  442.956000] device wlan0 entered promiscuous mode
> [  442.960000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  442.960000] ath10k_pci 0000:02:00.0: wmi 10x start scan
> [  442.960000] ath10k_pci 0000:02:00.0: scan event started type 1
> reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
> (1)
> [  442.960000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
> [  442.964000] ath10k_pci 0000:02:00.0: scan event foreign channel
> type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
> running (2)
> [  442.964000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
> cmd_flags 0 noise_floor 0 rx_clear_count 1535798 cycle_count 4656037
> [  443.112000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [  443.112000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
> cmd_flags 1 noise_floor -102 rx_clear_count 1535798 cycle_count
> 17506798
> [  443.116000] ath10k_pci 0000:02:00.0: scan event foreign channel
> type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
> running (2)
> [  443.116000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
> cmd_flags 0 noise_floor 0 rx_clear_count 1536013 cycle_count 17859909
> [  443.260000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [  443.260000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
> cmd_flags 1 noise_floor -101 rx_clear_count 1543161 cycle_count
> 30710758
> [  443.260000] ath10k_pci 0000:02:00.0: scan event completed type 2
> reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [  443.772000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
> width 3 ptr 85d316b0
> [  443.772000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  443.772000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
> 85d316b0 vdev_id 0
> [  443.772000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
> 5180 phymode 11ac-vht80
> [  443.772000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
> 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
> [  443.780000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
> [  443.780000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [  443.780000] ath10k_pci 0000:02:00.0: mac txpower 20
> [  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [  443.780000] ath10k_pci 0000:02:00.0: mac chanctx change freq 5180
> width 3 ptr 85d316b0 changed 2
> [  443.780000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
> [  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
> [  443.780000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
> [  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
> [  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
> [  443.780000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
> [  443.780000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
> id 0 bssid c8:pr:iv:at:e0:c1
> [  443.780000] ath10k_pci 0000:02:00.0: mac vdev 0 up
> [  443.780000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [  443.780000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
> [  443.780000] ath10k_pci 0000:02:00.0: mac txpower 20
> [  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [  443.780000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [  443.780000] br-lan: port 2(wlan0) entered forwarding state
> [  443.784000] br-lan: port 2(wlan0) entered forwarding state
> [  443.792000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
> [  443.800000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
> cipher 4 len 16
> [  443.800000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
> [  443.804000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  443.804000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  443.880000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  443.900000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
> [  444.204000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
> d6027db2-e965-469f-962c-9b70627c413d)
> [  444.212000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
> 0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
> [  444.224000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
> dfs 1 testmode 1
> [  444.244000] ath10k_warn: 2 callbacks suppressed
> [  444.244000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100804: -16
> [  444.252000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
> address for firmware address 4: -16
> [  444.260000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
> [  444.268000] ath10k_pci 0000:02:00.0: boot hif stop
> [  444.268000] ath10k_pci 0000:02:00.0: boot warm reset
> [  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.300000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.300000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.300000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.300000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.308000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.320000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.320000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.336000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.336000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.336000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.336000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.344000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.356000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.356000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.356000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  444.356000] ieee80211 phy0: Hardware restart was requested
> [  444.360000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [  444.360000] ath10k_pci 0000:02:00.0: boot hif stop
> [  444.360000] ath10k_pci 0000:02:00.0: boot warm reset
> [  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.392000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.392000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.400000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.412000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.412000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.428000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.428000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.436000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.448000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.448000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.448000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  444.448000] ath10k_pci 0000:02:00.0: boot hif power down
> [  444.448000] ath10k_pci 0000:02:00.0: boot hif power up
> [  444.448000] ath10k_pci 0000:02:00.0: boot 988x chip reset
> [  444.448000] ath10k_pci 0000:02:00.0: boot warm reset
> [  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.480000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.480000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.480000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.480000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.488000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.500000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.500000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.516000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.516000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.516000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.516000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.524000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.536000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.536000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.536000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.536000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.536000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.548000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [  444.552000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [  444.560000] ath10k_pci 0000:02:00.0: boot warm reset
> [  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.592000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.592000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.592000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.592000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.600000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.612000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.612000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.628000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.628000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.636000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.648000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.648000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.648000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.648000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.648000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.660000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [  444.664000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [  444.672000] ath10k_pci 0000:02:00.0: boot warm reset
> [  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.704000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.704000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.704000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.704000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.712000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.724000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.724000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.740000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.740000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.748000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.760000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.760000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.760000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.760000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.760000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.772000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [  444.776000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [  444.784000] ath10k_pci 0000:02:00.0: boot cold reset
> [  444.832000] ath10k_pci 0000:02:00.0: boot cold reset complete
> [  444.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [  444.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [  444.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [  444.852000] ath10k_pci 0000:02:00.0: boot target initialised
> [  444.852000] ath10k_pci 0000:02:00.0: boot qca988x chip reset complete (cold)
> [  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a69f0000
> [  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a687c000
> [  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a69f1000
> [  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f2000
> [  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [  444.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f3000
> [  444.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a69f4000
> [  444.860000] ath10k_pci 0000:02:00.0: bmi start
> [  444.860000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
> [  444.864000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
> [  444.864000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
> [  444.864000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
> [  444.868000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
> [  444.868000] ath10k_pci 0000:02:00.0: boot cal file downloaded
> [  444.868000] ath10k_pci 0000:02:00.0: boot using calibration mode file
> [  444.868000] ath10k_pci 0000:02:00.0: boot uploading firmware image
> c03afc64 len 237784 mode normal
> [  444.868000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc03afc64 length 237784
> [  444.868000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [  444.868000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc03afc64
> length 237784
> [  445.788000] br-lan: port 2(wlan0) entered forwarding state
> [  445.876000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [  445.880000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
> [  445.880000] ath10k_pci 0000:02:00.0: bmi done
> [  445.880000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
> [  445.880000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
> [  445.880000] ath10k_pci 0000:02:00.0: boot hif start
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
> pipe 0 dl pipe 1 eid 0 ready
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
> 0 TX flow control disabled
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
> not allocate target credits
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
> pipe 4 dl pipe 1 eid 1 ready
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
> eid 1 TX flow control disabled
> [  445.880000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
> 3 dl pipe 2 eid 2 ready
> [  445.884000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
> [  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
> 07 00 00 00 07 00 00 00 09 00 00 00  ................
> [  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
> 0a 00 00 00 03 00 00 00 00 00 00 00  ................
> [  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [  445.884000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [  445.884000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
> num_unit_info 2 unit size 440 actual units 145
> [  445.884000] ath10k_pci 0000:02:00.0: wmi event service ready
> min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
> vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
> 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
> 0x0000833a num_mem_reqs 0x00000001
> [  445.884000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
> [  445.884000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
> requested, addr 0x6300000
> [  445.884000] ath10k_pci 0000:02:00.0: wmi init 10.2
> [  445.904000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
> 1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
> [  445.908000] ath10k_pci 0000:02:00.0: htt target version 2.1
> [  445.908000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
> [  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
> [  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
> [  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
> [  445.908000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
> maxpower 40 regpower 40 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
> maxpower 54 regpower 54 antenna 0 mode 0
> [  445.916000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
> 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
> [  445.924000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
> [  445.924000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
> interface) type 1 subtype 0 bcnmode single-buf
> [  445.924000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
> subtype 0 macaddr c8:pr:iv:at:e0:c1
> [  445.924000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
> [  445.924000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
> peer_addr c8:pr:iv:at:e0:c1
> [  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
> [  445.924000] ath10k_pci 0000:02:00.0: mac txpower 20
> [  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [  445.924000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [  445.924000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
> width 3 ptr 85d316b0
> [  445.924000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  445.924000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
> 85d316b0 vdev_id 0
> [  445.924000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
> 5180 phymode 11ac-vht80
> [  445.924000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
> 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
> [  445.932000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [  445.932000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  445.932000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
> [  445.932000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
> [  445.932000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
> id 0 bssid c8:pr:iv:at:e0:c1
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 up
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [  445.932000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
> [  445.932000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [  445.932000] ath10k_pci 0000:02:00.0: mac txpower 20
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [  445.932000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
> cipher 4 len 16
> [  445.932000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
> [  445.932000] ath10k_pci 0000:02:00.0: device successfully recovered
>
> Log #1 (caldata moved, skip_otp and debug are enabled):
> [ 1265.708000] ath10k_pci 0000:02:00.0: boot hif power up
> [ 1265.708000] ath10k_pci 0000:02:00.0: boot 988x chip reset
> [ 1265.708000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1265.740000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1265.748000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1265.760000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1265.760000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1265.776000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1265.784000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot chip reset complete (warm)
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1265.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1265.808000] ath10k_pci 0000:02:00.0: bmi start
> [ 1265.808000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: boot did not find a
> calibration file, try DT next: -11
> [ 1265.812000] ath10k_pci 0000:02:00.0: boot did not find DT entry,
> try OTP next: -2
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
> [ 1265.812000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
> [ 1265.816000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
> [ 1265.816000] ath10k_pci 0000:02:00.0: boot upload otp to 0x1234 len 7205
> [ 1265.816000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc0bc9034 length 7205
> [ 1265.816000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [ 1265.816000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bc9034
> length 7204
> [ 1265.840000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0x860d9cc0 length 4
> [ 1265.840000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [ 1265.840000] ath10k_pci 0000:02:00.0: bmi execute address 0x1234 param 0x0
> [ 1265.960000] ath10k_pci 0000:02:00.0: bmi execute result 0x2
> [ 1265.960000] ath10k_pci 0000:02:00.0: boot otp execute result 2
> [ 1265.960000] ath10k_pci 0000:02:00.0: boot using calibration mode otp
> [ 1265.960000] ath10k_pci 0000:02:00.0: boot uploading firmware image
> c0bcac64 len 237784 mode normal
> [ 1265.960000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc0bcac64 length 237784
> [ 1265.960000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [ 1265.960000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bcac64
> length 237784
> [ 1266.980000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [ 1266.984000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
> [ 1266.984000] ath10k_pci 0000:02:00.0: bmi done
> [ 1266.984000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
> [ 1266.984000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot hif start
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
> pipe 0 dl pipe 1 eid 0 ready
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
> 0 TX flow control disabled
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
> not allocate target credits
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
> pipe 4 dl pipe 1 eid 1 ready
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
> eid 1 TX flow control disabled
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
> 3 dl pipe 2 eid 2 ready
> [ 1266.984000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
> 07 00 00 00 07 00 00 00 09 00 00 00  ................
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
> 0a 00 00 00 03 00 00 00 00 00 00 00  ................
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
> num_unit_info 2 unit size 440 actual units 145
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi event service ready
> min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
> vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
> 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
> 0x0000833a num_mem_reqs 0x00000001
> [ 1266.988000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
> requested, addr 0x5cf0000
> [ 1266.988000] ath10k_pci 0000:02:00.0: wmi init 10.2
> [ 1267.008000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
> 1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
> [ 1267.012000] ath10k_pci 0000:02:00.0: htt target version 2.1
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
> [ 1267.012000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1267.020000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
> 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
> interface) type 1 subtype 0 bcnmode single-buf
> [ 1267.028000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
> subtype 0 macaddr c8:pr:iv:at:e0:c1
> [ 1267.028000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
> peer_addr c8:pr:iv:at:e0:c1
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac txpower 0
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 0
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 0
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.028000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.028000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.032000] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
> [ 1267.036000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.044000] device wlan3 entered promiscuous mode
> [ 1267.048000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.052000] ath10k_pci 0000:02:00.0: wmi 10x start scan
> [ 1267.052000] ath10k_pci 0000:02:00.0: scan event started type 1
> reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
> (1)
> [ 1267.052000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
> [ 1267.056000] ath10k_pci 0000:02:00.0: scan event foreign channel
> type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
> running (2)
> [ 1267.056000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
> cmd_flags 0 noise_floor 0 rx_clear_count 1529522 cycle_count 4629099
> [ 1267.200000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [ 1267.200000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5180
> cmd_flags 1 noise_floor -102 rx_clear_count 1529522 cycle_count
> 17479596
> [ 1267.204000] ath10k_pci 0000:02:00.0: scan event foreign channel
> type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
> running (2)
> [ 1267.204000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
> cmd_flags 0 noise_floor 0 rx_clear_count 1529952 cycle_count 17832531
> [ 1267.352000] ath10k_pci 0000:02:00.0: scan event bss channel type 4
> reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [ 1267.352000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq 5200
> cmd_flags 1 noise_floor -102 rx_clear_count 1535112 cycle_count
> 30684260
> [ 1267.352000] ath10k_pci 0000:02:00.0: scan event completed type 2
> reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
> (2)
> [ 1267.860000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
> width 3 ptr 85d316b0
> [ 1267.860000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.860000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
> 85d316b0 vdev_id 0
> [ 1267.860000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
> 5180 phymode 11ac-vht80
> [ 1267.860000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
> 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
> [ 1267.868000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac txpower 20
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac chanctx change freq 5180
> width 3 ptr 85d316b0 changed 2
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
> [ 1267.868000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
> id 0 bssid c8:pr:iv:at:e0:c1
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev 0 up
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [ 1267.868000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
> [ 1267.868000] ath10k_pci 0000:02:00.0: mac txpower 20
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [ 1267.868000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [ 1267.868000] br-lan: port 2(wlan3) entered forwarding state
> [ 1267.872000] br-lan: port 2(wlan3) entered forwarding state
> [ 1267.880000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
> [ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
> [ 1267.888000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
> cipher 4 len 16
> [ 1267.888000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
> [ 1267.892000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.892000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1267.968000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1267.984000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
> [ 1268.292000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
> 2b2c06d2-74c0-4c87-932c-7852173faa09)
> [ 1268.300000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
> 0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
> [ 1268.312000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
> dfs 1 testmode 1
> [ 1268.332000] ath10k_warn: 6 callbacks suppressed
> [ 1268.332000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100804: -16
> [ 1268.340000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
> address for firmware address 4: -16
> [ 1268.352000] ath10k_pci 0000:02:00.0: failed to read firmware dump area: -16
> [ 1268.360000] ath10k_pci 0000:02:00.0: boot hif stop
> [ 1268.360000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.392000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.400000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.412000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.412000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.428000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.436000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.448000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.448000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.448000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1268.448000] ieee80211 phy3: Hardware restart was requested
> [ 1268.452000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [ 1268.452000] ath10k_pci 0000:02:00.0: boot hif stop
> [ 1268.452000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.484000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.492000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.504000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.504000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.520000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.528000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot hif power down
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot hif power up
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot 988x chip reset
> [ 1268.540000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.572000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.580000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.592000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.592000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.608000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.616000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.628000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.640000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [ 1268.644000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [ 1268.652000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.684000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.692000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.704000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.704000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.720000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.728000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.740000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.752000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [ 1268.756000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [ 1268.764000] ath10k_pci 0000:02:00.0: boot warm reset
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.796000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.804000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.816000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.816000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.832000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.840000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot warm reset complete
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.852000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.864000] ath10k_pci 0000:02:00.0: failed to read diag value at
> 0x1c100800: -16
> [ 1268.868000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
> [ 1268.876000] ath10k_pci 0000:02:00.0: boot cold reset
> [ 1268.924000] ath10k_pci 0000:02:00.0: boot cold reset complete
> [ 1268.924000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
> [ 1268.924000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.932000] ath10k_pci 0000:02:00.0: boot target indicator 0
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot target indicator 2
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot target initialised
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot qca988x chip reset complete (cold)
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
> entries 16 base_addr a5ca0000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1 entries
> 512 base_addr a6918000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2 entries
> 128 base_addr a7864000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
> entries 32 base_addr a69f7000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
> entries 4096 base_addr a6810000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
> entries 2 base_addr a69f4000
> [ 1268.944000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7 entries
> 2 base_addr a6828000
> [ 1268.952000] ath10k_pci 0000:02:00.0: bmi start
> [ 1268.952000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: boot did not find a
> calibration file, try DT next: -11
> [ 1268.956000] ath10k_pci 0000:02:00.0: boot did not find DT entry,
> try OTP next: -2
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: boot push board extended data addr 0x0
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
> [ 1268.956000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0 length 2116
> [ 1268.960000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
> [ 1268.960000] ath10k_pci 0000:02:00.0: boot upload otp to 0x1234 len 7205
> [ 1268.960000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc0bc9034 length 7205
> [ 1268.960000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [ 1268.960000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bc9034
> length 7204
> [ 1268.984000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0x86937d70 length 4
> [ 1268.984000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [ 1268.984000] ath10k_pci 0000:02:00.0: bmi execute address 0x1234 param 0x0
> [ 1269.044000] ath10k_pci 0000:02:00.0: bmi execute result 0x2
> [ 1269.044000] ath10k_pci 0000:02:00.0: boot otp execute result 2
> [ 1269.044000] ath10k_pci 0000:02:00.0: boot using calibration mode otp
> [ 1269.044000] ath10k_pci 0000:02:00.0: boot uploading firmware image
> c0bcac64 len 237784 mode normal
> [ 1269.044000] ath10k_pci 0000:02:00.0: bmi fast download address
> 0x1234 buffer 0xc0bcac64 length 237784
> [ 1269.044000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
> [ 1269.044000] ath10k_pci 0000:02:00.0: bmi lz data buffer 0xc0bcac64
> length 237784
> [ 1269.876000] br-lan: port 2(wlan3) entered forwarding state
> [ 1270.052000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
> [ 1270.052000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
> [ 1270.052000] ath10k_pci 0000:02:00.0: bmi done
> [ 1270.052000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
> [ 1270.052000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
> [ 1270.052000] ath10k_pci 0000:02:00.0: boot hif start
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'Control' ul
> pipe 0 dl pipe 1 eid 0 ready
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'Control' eid
> 0 TX flow control disabled
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service HTT Data does
> not allocate target credits
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data' ul
> pipe 4 dl pipe 1 eid 1 ready
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
> eid 1 TX flow control disabled
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul pipe
> 3 dl pipe 2 eid 2 ready
> [ 1270.056000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00 00
> 07 00 00 00 07 00 00 00 09 00 00 00  ................
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00 00
> 0a 00 00 00 03 00 00 00 00 00 00 00  ................
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00  ................
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units 0
> num_unit_info 2 unit size 440 actual units 145
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi event service ready
> min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
> vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
> 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
> 0x0000833a num_mem_reqs 0x00000001
> [ 1270.056000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
> requested, addr 0x5c60000
> [ 1270.056000] ath10k_pci 0000:02:00.0: wmi init 10.2
> [ 1270.076000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
> 1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
> [ 1270.080000] ath10k_pci 0000:02:00.0: htt target version 2.1
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi disable pktlog
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
> [ 1270.080000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq 5180
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq 5200
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq 5220
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq 5240
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq 5260
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq 5280
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq 5300
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq 5320
> maxpower 40 regpower 40 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq 5500
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq 5520
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq 5540
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq 5560
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq 5580
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq 5600
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq 5620
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq 5640
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq 5660
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq 5680
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq 5700
> maxpower 54 regpower 54 antenna 0 mode 0
> [ 1270.088000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37 rd2g
> 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
> interface) type 1 subtype 0 bcnmode single-buf
> [ 1270.096000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type 1
> subtype 0 macaddr c8:pr:iv:at:e0:c1
> [ 1270.096000] ath10k_pci 0000:02:00.0: vdev param 0 not supported by firmware
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
> peer_addr c8:pr:iv:at:e0:c1
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 38 value 3747
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 39 value 3895
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 40 value 3900
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac txpower 20
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
> width 3 ptr 85d316b0
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
> 85d316b0 vdev_id 0
> [ 1270.096000] ath10k_pci 0000:02:00.0: mac vdev 0 start center_freq
> 5180 phymode 11ac-vht80
> [ 1270.096000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0 flags:
> 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
> [ 1270.104000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
> [ 1270.104000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode to staggered
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0 assoc
> id 0 bssid c8:pr:iv:at:e0:c1
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 up
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
> [ 1270.104000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
> [ 1270.104000] ath10k_pci 0000:02:00.0: mac txpower 20
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
> cipher 4 len 16
> [ 1270.104000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
> [ 1270.104000] ath10k_pci 0000:02:00.0: device successfully recovered
> [ 1270.112000] ath10k_pci 0000:02:00.0: mac monitor recalc started? 0
> needed? 0 allowed? 1
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 13 July 2015 at 21:32, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hi Michal,
>
> thanks for the quick reply :-)
>
> On Mon, Jul 13, 2015 at 7:57 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> It is always good to see either debugs or traces to know what happened
>> before a crash. Your build doesn't seem to contain either at the
>> moment though.
> This is what I enabled for the two new logs you can see below:
> # cat /sys/module/ath10k_core/parameters/debug_mask
> 1074
>
>> I see you're using a pretty recent openwrt snapshot.
> Correct, it is a trunk build from yesterday afternoon.
>
>> If I assume the caldata extracted from flash partition isn't
>> complete then it could lead to firmware crash.
> I can see that at least the country code ("GB") and mac address are
> read correctly from dumped caldata.
> That doesn't mean that it HAS to be correct, but it can't be total
> garbage either.
>
>>  cd /lib/firmware/ath10k/QCA988X/hw2.0/
>>  mv caldata.bin board.bin
>>  rmmod ath10k_pci
>>  echo 1 > /sys/module/ath10k_core/parameters/skip_otp
>>  modprobe ath10k_pci
>>  wifi
> The first log [0] you can see below has skip_otp at the default value
> and it uses the caldata as supplied through the standard firmware
> mechanism.
> The second log [1] you can see below is with skip_otp set to 1 and
> caldata moved to board.bin (mac address and country code were still
> correct in that case).
> Each log was produced with: wifi up && sleep 5s && wifi down && dmesg
> (both have the mac address masked - everything else is untouched)
>
> Please let me know if I need to change the debug mask or if you need
> more information.

Thanks for the logs! I would've loved to get full traces or debugs
with dumps though (I can't see anything related to SWBA in the logs).

Anyway - it seems that device crashes after ~5 beacon intervals. Can
you confirm (with another device/sniffer) whether the ath10k AP sends
any beacons on the air before crashing, please?

Did the card ever work with any previous OpenWRT version?


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 14 July 2015 at 00:57, Sebastian Gottschall <s.gottschall@dd-wrt.com> wrote:
> you can reproduce this issue with a standard compex wle 600v card. its a on
> board eeprom card. so calibration issues will not occur.
> but this card will also crash with recent firmwares on any platform. but
> (and now the big thing) it will only happen in ap mode.
> if you initialize it in station mode, it will work

That's interesting. Did the card ever work as AP with ath10k for you?
By "any platform" you mean you tested on both little- and big- endian
machines?

My current guess is this could have something to do with AP beaconing
- if it was to get an invalid dma pointer it could crash the device so
hard as to effectively prevent host from accessing register dump
memory.


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

+ ath10k list back, martin

Make sure to reply to everyone next time and not just me, please ;-)

On 14 July 2015 at 12:18, Sebastian Gottschall <s.gottschall@dd-wrt.com> wrote:
> Am 14.07.2015 um 07:45 schrieb Michal Kazior:
>>
>> On 14 July 2015 at 00:57, Sebastian Gottschall <s.gottschall@dd-wrt.com>
>> wrote:
>>>
>>> you can reproduce this issue with a standard compex wle 600v card. its a
>>> on
>>> board eeprom card. so calibration issues will not occur.
>>> but this card will also crash with recent firmwares on any platform. but
>>> (and now the big thing) it will only happen in ap mode.
>>> if you initialize it in station mode, it will work
>>
>> That's interesting. Did the card ever work as AP with ath10k for you?
>> By "any platform" you mean you tested on both little- and big- endian
>> machines?
>
> yes. with older firmwares :-)

I assume it's the same as Martin.

Do you guys know if 10.2-00082[1] crashes as well?

[1]: https://github.com/kvalo/ath10k-firmware/blob/master/10.2/firmware-3.bin_10.2-00082-4-2


> tested on AR71XX (MIPS BE) , Gateworks Ventana ( ARM Little endian), and
> Gateworks Laguna ( ARM Little Endian)
>
> all 3 devices crash the firmware. , e

Thanks for the details.


>> My current guess is this could have something to do with AP beaconing
>> - if it was to get an invalid dma pointer it could crash the device so
>> hard as to effectively prevent host from accessing register dump
>> memory.
>
> but whats the difference? some cards work and some are not. so something in
> the otp must be likelly responsible for crashing the firmware.
> just a guess

I can imagine firmware could execute some code based on board data or
device specific bits which do extra preparations on beacon path and
which presence or lack of could prompt a crash. This is merely a
speculation on my part.

The OTP most likely isn't the problem because - as proven by Martin -
the crash occurs with caldata at apparently same spot as when
board+otp. When caldata is used driver does not execute OTP program at
all. Maybe caldata itself is misinterpreted by newer firmware?

If someone is brave enough with spare time one could attempt to
re-implement the old by-copy beaconing (which copies entire beacon
frame into WMI command instead of passing just dma pointer; see [2]
for reference) to see if it makes any difference. If that helps it
would imply the crash is indeed related to dma beaconing. If it
doesn't it would prove nothing though.

[2]: https://github.com/kvalo/ath/commit/748afc4735361e21ad655c0dc021ea3aaeeb3efd


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Sebastian Gottschall]

xo just revert that commit and test again. okay. i will do that that evening

Am 14.07.2015 um 12:50 schrieb Michal Kazior:
> + ath10k list back, martin
>
> Make sure to reply to everyone next time and not just me, please ;-)
>
> On 14 July 2015 at 12:18, Sebastian Gottschall <s.gottschall@dd-wrt.com> wrote:
>> Am 14.07.2015 um 07:45 schrieb Michal Kazior:
>>> On 14 July 2015 at 00:57, Sebastian Gottschall <s.gottschall@dd-wrt.com>
>>> wrote:
>>>> you can reproduce this issue with a standard compex wle 600v card. its a
>>>> on
>>>> board eeprom card. so calibration issues will not occur.
>>>> but this card will also crash with recent firmwares on any platform. but
>>>> (and now the big thing) it will only happen in ap mode.
>>>> if you initialize it in station mode, it will work
>>> That's interesting. Did the card ever work as AP with ath10k for you?
>>> By "any platform" you mean you tested on both little- and big- endian
>>> machines?
>> yes. with older firmwares :-)
> I assume it's the same as Martin.
>
> Do you guys know if 10.2-00082[1] crashes as well?
>
> [1]: https://github.com/kvalo/ath10k-firmware/blob/master/10.2/firmware-3.bin_10.2-00082-4-2
>
>
>> tested on AR71XX (MIPS BE) , Gateworks Ventana ( ARM Little endian), and
>> Gateworks Laguna ( ARM Little Endian)
>>
>> all 3 devices crash the firmware. , e
> Thanks for the details.
>
>
>>> My current guess is this could have something to do with AP beaconing
>>> - if it was to get an invalid dma pointer it could crash the device so
>>> hard as to effectively prevent host from accessing register dump
>>> memory.
>> but whats the difference? some cards work and some are not. so something in
>> the otp must be likelly responsible for crashing the firmware.
>> just a guess
> I can imagine firmware could execute some code based on board data or
> device specific bits which do extra preparations on beacon path and
> which presence or lack of could prompt a crash. This is merely a
> speculation on my part.
>
> The OTP most likely isn't the problem because - as proven by Martin -
> the crash occurs with caldata at apparently same spot as when
> board+otp. When caldata is used driver does not execute OTP program at
> all. Maybe caldata itself is misinterpreted by newer firmware?
>
> If someone is brave enough with spare time one could attempt to
> re-implement the old by-copy beaconing (which copies entire beacon
> frame into WMI command instead of passing just dma pointer; see [2]
> for reference) to see if it makes any difference. If that helps it
> would imply the crash is indeed related to dma beaconing. If it
> doesn't it would prove nothing though.
>
> [2]: https://github.com/kvalo/ath/commit/748afc4735361e21ad655c0dc021ea3aaeeb3efd
>
>
> Michał
>


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

On Tue, Jul 14, 2015 at 12:50 PM, Michal Kazior <michal.kazior@tieto.com> wrote:
> Do you guys know if 10.2-00082[1] crashes as well?
I just tested that firmware version and it crashes with the same symptoms.

And because you asked before: firmware-2.bin is the only firmware that
does not crash (and thus managed to get other devices to connect to
this AP).

> If someone is brave enough with spare time one could attempt to
> re-implement the old by-copy beaconing (which copies entire beacon
> frame into WMI command instead of passing just dma pointer; see [2]
> for reference) to see if it makes any difference. If that helps it
> would imply the crash is indeed related to dma beaconing. If it
> doesn't it would prove nothing though.
I have written this hack to make it use non-DMA beacon transfers: [0]
I am not sure whether it's correct or not, but it seems to suffer from
the same problem: [1]

You also requested a more detailed debug log - you can also find it here: [2].
(my hack is not applied here)
I chose debug mask 0xFFFFBFFF because I cannot read anything with
ATH10K_DBG_PCI_PS enabled.

As before: I have masked the MAC address, but apart from that the
logfile is unmodified.


Regards,
Martin


[0] https://paste.kde.org/px7uzinki
[1] https://paste.kde.org/poa7lwadh
[2] https://paste.kde.org/p1p9d3vle


debug log with my "non DMA beacon transfer" hack:
<7>[  158.220000] ath10k_pci 0000:02:00.0: boot hif power up
<7>[  158.220000] ath10k_pci 0000:02:00.0: boot 988x chip reset
<7>[  158.220000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  158.252000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  158.260000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  158.272000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  158.272000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: boot push board extended
data addr 0x0
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
<7>[  158.324000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0
length 2116
<7>[  158.328000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
<7>[  158.328000] ath10k_pci 0000:02:00.0: boot cal file downloaded
<7>[  158.328000] ath10k_pci 0000:02:00.0: boot using calibration mode file
<7>[  158.328000] ath10k_pci 0000:02:00.0: boot uploading firmware
image c03afc64 len 237784 mode normal
<7>[  158.328000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc03afc64 length 237784
<7>[  158.328000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
<7>[  158.328000] ath10k_pci 0000:02:00.0: bmi lz data buffer
0xc03afc64 length 237784
<7>[  159.348000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
<7>[  159.352000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
<7>[  159.352000] ath10k_pci 0000:02:00.0: bmi done
<7>[  159.352000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
<7>[  159.352000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
<7>[  159.352000] ath10k_pci 0000:02:00.0: boot hif start
<7>[  159.352000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
ul pipe 0 dl pipe 1 eid 0 ready
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
eid 0 TX flow control disabled
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc service HTT Data
does not allocate target credits
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
ul pipe 4 dl pipe 1 eid 1 ready
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul
pipe 3 dl pipe 2 eid 2 ready
<7>[  159.356000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00
00 07 00 00 00 07 00 00 00 09 00 00 00  ................
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00
00 0a 00 00 00 03 00 00 00 00 00 00 00  ................
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units
0 num_unit_info 2 unit size 440 actual units 145
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
<7>[  159.356000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x6270000
<7>[  159.356000] ath10k_pci 0000:02:00.0: wmi init 10.2
<7>[  159.376000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
<7>[  159.380000] ath10k_pci 0000:02:00.0: htt target version 2.1
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
<7>[  159.380000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq
5180 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq
5200 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq
5220 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq
5240 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq
5260 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq
5280 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq
5300 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq
5320 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq
5500 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq
5520 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq
5540 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq
5560 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq
5580 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq
5600 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq
5620 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq
5640 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq
5660 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq
5680 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq
5700 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  159.388000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37
rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
<7>[  159.392000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
<7>[  159.396000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type
1 subtype 0 macaddr c8:pr:iv:at:e0:c1
<7>[  159.396000] ath10k_pci 0000:02:00.0: vdev param 0 not supported
by firmware
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
38 value 3747
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
39 value 3895
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
40 value 3900
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac txpower 0
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 0
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 0
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  159.396000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  159.396000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<6>[  159.396000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[  159.404000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<6>[  159.408000] device wlan0 entered promiscuous mode
<7>[  159.412000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  159.416000] ath10k_pci 0000:02:00.0: wmi 10x start scan
<7>[  159.416000] ath10k_pci 0000:02:00.0: scan event started type 1
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
(1)
<7>[  159.416000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
<7>[  159.420000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[  159.420000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5180 cmd_flags 0 noise_floor 0 rx_clear_count 1547947 cycle_count
4641948
<7>[  159.568000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[  159.568000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5180 cmd_flags 1 noise_floor -103 rx_clear_count 1570011 cycle_count
17492709
<7>[  159.572000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[  159.572000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5200 cmd_flags 0 noise_floor 0 rx_clear_count 1570656 cycle_count
17845908
<7>[  159.716000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[  159.716000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5200 cmd_flags 1 noise_floor -103 rx_clear_count 1572146 cycle_count
30697549
<7>[  159.716000] ath10k_pci 0000:02:00.0: scan event completed type 2
reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
<7>[  160.228000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85cac130
<7>[  160.228000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  160.228000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85cac130 vdev_id 0
<7>[  160.228000] ath10k_pci 0000:02:00.0: mac vdev 0 start
center_freq 5180 phymode 11ac-vht80
<7>[  160.228000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0
flags: 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
<7>[  160.236000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac chanctx change freq
5180 width 3 ptr 85cac130 changed 2
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
<7>[  160.236000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode
to staggered
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0
assoc id 0 bssid c8:pr:iv:at:e0:c1
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac vdev 0 up
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[  160.236000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
<7>[  160.236000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  160.236000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<6>[  160.236000] br-lan: port 2(wlan0) entered forwarding state
<6>[  160.240000] br-lan: port 2(wlan0) entered forwarding state
<6>[  160.244000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[  160.332000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  160.356000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
<7>[  161.784000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<6>[  162.244000] br-lan: port 2(wlan0) entered forwarding state
<3>[  169.976000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
729b2c24-3e8d-4a7c-9013-79562a0ad00d)
<6>[  169.984000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
<6>[  169.996000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
<4>[  170.016000] ath10k_pci 0000:02:00.0: failed to read diag value
at 0x1c100804: -16
<4>[  170.024000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
<3>[  170.032000] ath10k_pci 0000:02:00.0: failed to read firmware
dump area: -16
<7>[  170.040000] ath10k_pci 0000:02:00.0: boot hif stop
<7>[  170.040000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  170.108000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.116000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.128000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  170.128000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  170.128000] ath10k_pci 0000:02:00.0: boot warm reset complete
<6>[  170.128000] ieee80211 phy0: Hardware restart was requested
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  170.200000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.208000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot hif power down
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot hif power up
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot 988x chip reset
<7>[  170.220000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  170.288000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.296000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.308000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<4>[  170.320000] ath10k_pci 0000:02:00.0: failed to read diag value
at 0x1c100800: -16
<4>[  170.324000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
<7>[  170.332000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  170.400000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.408000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.420000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<4>[  170.432000] ath10k_pci 0000:02:00.0: failed to read diag value
at 0x1c100800: -16
<4>[  170.436000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
<7>[  170.444000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  170.512000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.520000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  170.532000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<4>[  170.544000] ath10k_pci 0000:02:00.0: failed to read diag value
at 0x1c100800: -16
<4>[  170.548000] ath10k_pci 0000:02:00.0: failed to poke copy engine: -16
<7>[  170.556000] ath10k_pci 0000:02:00.0: boot cold reset
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: boot push board extended
data addr 0x0
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
<7>[  170.636000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0
length 2116
<7>[  170.640000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
<7>[  170.640000] ath10k_pci 0000:02:00.0: boot cal file downloaded
<7>[  170.640000] ath10k_pci 0000:02:00.0: boot using calibration mode file
<7>[  170.640000] ath10k_pci 0000:02:00.0: boot uploading firmware
image c03afc64 len 237784 mode normal
<7>[  170.640000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc03afc64 length 237784
<7>[  170.640000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
<7>[  170.640000] ath10k_pci 0000:02:00.0: bmi lz data buffer
0xc03afc64 length 237784
<7>[  171.644000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
<7>[  171.644000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
<7>[  171.644000] ath10k_pci 0000:02:00.0: bmi done
<7>[  171.644000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
<7>[  171.644000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
<7>[  171.644000] ath10k_pci 0000:02:00.0: boot hif start
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
ul pipe 0 dl pipe 1 eid 0 ready
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
eid 0 TX flow control disabled
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service HTT Data
does not allocate target credits
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
ul pipe 4 dl pipe 1 eid 1 ready
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul
pipe 3 dl pipe 2 eid 2 ready
<7>[  171.648000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00
00 07 00 00 00 07 00 00 00 09 00 00 00  ................
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00
00 0a 00 00 00 03 00 00 00 00 00 00 00  ................
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units
0 num_unit_info 2 unit size 440 actual units 145
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
<7>[  171.648000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5de0000
<7>[  171.648000] ath10k_pci 0000:02:00.0: wmi init 10.2
<7>[  171.668000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
<7>[  171.672000] ath10k_pci 0000:02:00.0: htt target version 2.1
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
<7>[  171.672000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq
5180 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq
5200 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq
5220 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq
5240 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq
5260 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq
5280 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq
5300 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq
5320 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq
5500 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq
5520 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq
5540 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq
5560 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq
5580 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq
5600 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq
5620 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq
5640 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq
5660 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq
5680 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq
5700 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  171.680000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37
rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
<7>[  171.688000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type
1 subtype 0 macaddr c8:pr:iv:at:e0:c1
<7>[  171.688000] ath10k_pci 0000:02:00.0: vdev param 0 not supported
by firmware
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
38 value 3747
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
39 value 3895
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
40 value 3900
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85cac130
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85cac130 vdev_id 0
<7>[  171.688000] ath10k_pci 0000:02:00.0: mac vdev 0 start
center_freq 5180 phymode 11ac-vht80
<7>[  171.688000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0
flags: 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
<7>[  171.696000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
<7>[  171.696000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode
to staggered
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0
assoc id 0 bssid c8:pr:iv:at:e0:c1
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 up
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
<7>[  171.696000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[  171.696000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
<7>[  171.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
<6>[  171.696000] ath10k_pci 0000:02:00.0: device successfully recovered
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.116000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.124000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.136000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.136000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.152000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.160000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.172000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.172000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.172000] ath10k_pci 0000:02:00.0: boot warm reset complete
<6>[  172.172000] ieee80211 phy0: Hardware restart was requested
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.208000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.216000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.228000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.228000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.244000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.252000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot hif power down
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot hif power up
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot 988x chip reset
<7>[  172.264000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.296000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.304000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.316000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.316000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.396000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.404000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.416000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.416000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.496000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.504000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.516000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.516000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.612000] ath10k_pci 0000:02:00.0: boot cold reset complete
<7>[  172.612000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[  172.612000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.620000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot qca988x chip reset
complete (cold)
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6818000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6834000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6819000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a681a000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6990000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a681b000
<7>[  172.632000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a681c000
<7>[  172.640000] ath10k_pci 0000:02:00.0: bmi start
<7>[  172.640000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
<7>[  173.652000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
<7>[  173.652000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
<7>[  173.652000] ath10k_pci 0000:02:00.0: bmi done
<7>[  173.652000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
<7>[  173.652000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
<7>[  173.652000] ath10k_pci 0000:02:00.0: boot hif start
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
ul pipe 0 dl pipe 1 eid 0 ready
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
eid 0 TX flow control disabled
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service HTT Data
does not allocate target credits
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
ul pipe 4 dl pipe 1 eid 1 ready
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul
pipe 3 dl pipe 2 eid 2 ready
<7>[  173.656000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00
00 07 00 00 00 07 00 00 00 09 00 00 00  ................
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00
00 0a 00 00 00 03 00 00 00 00 00 00 00  ................
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units
0 num_unit_info 2 unit size 440 actual units 145
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
<7>[  173.656000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5de0000
<7>[  173.656000] ath10k_pci 0000:02:00.0: wmi init 10.2
<7>[  173.676000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
<7>[  173.680000] ath10k_pci 0000:02:00.0: htt target version 2.1
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
<7>[  173.680000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq
5180 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq
5200 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq
5220 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq
5240 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq
5260 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq
5280 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq
5300 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq
5320 maxpower 40 regpower 40 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq
5500 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq
5520 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq
5540 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq
5560 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq
5580 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq
5600 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq
5620 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq
5640 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq
5660 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq
5680 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq
5700 maxpower 54 regpower 54 antenna 0 mode 0
<7>[  173.688000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37
rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
<7>[  173.696000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type
1 subtype 0 macaddr c8:pr:iv:at:e0:c1
<7>[  173.696000] ath10k_pci 0000:02:00.0: vdev param 0 not supported
by firmware
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
38 value 3747
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
39 value 3895
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
40 value 3900
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 1 value -1
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 2 value -1
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85cac130
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85cac130 vdev_id 0
<7>[  173.696000] ath10k_pci 0000:02:00.0: mac vdev 0 start
center_freq 5180 phymode 11ac-vht80
<7>[  173.696000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0
flags: 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
<7>[  173.704000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
<7>[  173.704000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode
to staggered
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0
assoc id 0 bssid c8:pr:iv:at:e0:c1
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 up
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
<7>[  173.704000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[  173.704000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
<7>[  173.704000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
<6>[  173.704000] ath10k_pci 0000:02:00.0: device successfully recovered
<7>[  174.656000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232


debug log (0xFFFFBFFF) without my hack applied:
<7>[   88.140000] ath10k_pci 0000:02:00.0: boot hif power up
<7>[   88.140000] ath10k_pci 0000:02:00.0: boot 988x chip reset
<7>[   88.140000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[   88.208000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   88.216000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot chip reset complete (warm)
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   88.228000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   88.240000] ath10k_pci 0000:02:00.0: bmi start
<7>[   88.240000] ath10k_pci 0000:02:00.0: bmi write address 0x400800 length 4
<7>[   89.268000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
<7>[   89.272000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
<7>[   89.272000] ath10k_pci 0000:02:00.0: pci hif set callbacks
<7>[   89.272000] ath10k_pci 0000:02:00.0: pci hif get default pipe
<7>[   89.272000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   89.272000] ath10k_pci 0000:02:00.0: bmi done
<7>[   89.272000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
<7>[   89.272000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
<7>[   89.272000] ath10k_pci 0000:02:00.0: boot hif start
<7>[   89.272000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   89.272000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 00 00 00 01 00 02 00 00 07 16 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00                                      ....
<7>[   89.276000] ath10k_pci 0000:02:00.0: Target ready! transmit
resources: 2 size:1792
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
ul pipe 0 dl pipe 1 eid 0 ready
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
eid 0 TX flow control disabled
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service HTT Data
does not allocate target credits
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x062719ac len 16 n_items 1
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 08 00 00 03 00 00 02 00 00 03 08 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 01 00 00 03 00 00 03 00 01 d0 07  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00                                      ....
<7>[   89.276000] ath10k_pci 0000:02:00.0: HTC Service HTT Data
connect response: status: 0x0, assigned ep: 0x1
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
ul pipe 4 dl pipe 1 eid 1 ready
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x062724cc len 16 n_items 1
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 08 00 00 04 ff ff 02 00 00 01 00 02 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 02 00 00 03 00 00 01 00 02 b4 06  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00                                      ....
<7>[   89.276000] ath10k_pci 0000:02:00.0: HTC Service WMI connect
response: status: 0x0, assigned ep: 0x2
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul
pipe 3 dl pipe 2 eid 2 ready
<7>[   89.276000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: HTC is using TX credit flow control
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06272fec len 20 n_items 1
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 0c 00 00 05 00 00 05 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef39e0
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 180
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 ac
00 00 03 00 00 00 80 00 00 46 00 00 41  ............F..A
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00 01 00 00 00 00 00 00 00 0e 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 07 00 00
00 07 00 00 00 09 00 00 00 0f 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 0a 00 00
00 03 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 03 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 5b 08 00
00 b2 01 80 33 ea ff 00 00 3f 00 00 00  [......3....?...
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 3f 00 00
00 3a 83 00 00 1f 00 00 00 07 00 00 00  ?...:...........
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000080: c0 0b 00
00 01 90 1f 00 08 09 00 00 ac 0a 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 00000090: 2e 13 00
00 d4 17 00 00 00 00 00 00 04 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 000000a0: 01 00 00
00 01 00 00 00 b8 01 00 00 02 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci rx: 000000b0: 00 00 00
00                                      ....
<7>[   89.276000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dcc20
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00
00 07 00 00 00 07 00 00 00 09 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00
00 0a 00 00 00 03 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units
0 num_unit_info 2 unit size 440 actual units 145
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
<7>[   89.276000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x6280000
<7>[   89.276000] ath10k_pci 0000:02:00.0: wmi init 10.2
<7>[   89.276000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06273b00 len 176 n_items 1
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 a8 00 00 04 00 00 00 a0 00 00 10 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 90
00 00 00 02 00 00 00 00 01 00 00 80 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 07
00 00 00 07 00 00 00 64 00 00 00 64 00 00 00  ........d...d...
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 64
00 00 00 28 00 00 00 01 00 00 00 04 00 00 00  d...(...........
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 02
00 00 00 02 00 00 00 08 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 04 00 00 20 00 00 00  ............ ...
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 01
00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 90
05 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 00000090: 01
00 00 00 01 00 00 00 01 00 00 00 00 00 28 06  ..............(.
<7>[   89.276000] ath10k_pci 0000:02:00.0: pci tx data: 000000a0: 38
f9 00 00 00 00 00 00 00 00 00 00 00 00 00 00  8...............
<7>[   89.276000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef39e0
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 140
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 84
00 00 04 00 00 10 90 00 00 50 20 31 34  ............P 14
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 35 20 56
20 31 36 20 54 20 34 34 33 0a 00 00 00  5 V 16 T 443....
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000080: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   89.288000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dcb60
<7>[   89.288000] ath10k_pci 0000:02:00.0: wmi print 'P 145 V 16 T 443'
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 140
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 84
00 00 05 00 00 10 90 00 00 5f 77 6c 61  ............_wla
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 6e 5f 72
74 74 5f 65 6e 61 62 6c 65 00 00 00 00  n_rtt_enable....
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.288000] ath10k_pci 0000:02:00.0: pci rx: 00000080: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   89.288000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dcaa0
<7>[   89.288000] ath10k_pci 0000:02:00.0: wmi print '_wlan_rtt_enable'
<7>[   89.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 07 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.296000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 32
<7>[   89.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 18
00 00 06 00 00 01 80 00 00 46 00 00 41  ............F..A
<7>[   89.296000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00 c8 pr iv at e0 c1 00 00 00 00 00 00  .......U........
<7>[   89.296000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc9e0
<7>[   89.296000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfbca0 len 12 n_items 1
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 01
01 04 00 00 02 00 00 00 00 00 00              ............
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 04
00 00 08 00 00 00 01 02 00              ............
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   89.300000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 1 skb 85cac020
<7>[   89.300000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 8677e260
<7>[   89.300000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x0
<7>[   89.300000] ath10k_pci 0000:02:00.0: htt target version 2.1
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfce20 len 48 n_items 1
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 01
01 28 00 00 03 00 00 02 01 00 00 00 e0 0d 06  ..(.............
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
60 0f 06 00 08 80 07 ff ff ff 03 2f 00 3f 00  .`........../.?.
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 0f
00 19 00 03 00 0e 00 06 00 09 00 01 00 02 00  ................
<7>[   89.300000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[   89.300000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfd6c0 len 12 n_items 1
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 04 00 86 05 da 40 08 90 00 00              .......@....
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 09 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.300000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.300000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef3020
<7>[   89.300000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
<7>[   89.300000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfe0e0 len 20 n_items 1
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 06 00 00 06 90 00 00 1e 00 00 00  ................
<7>[   89.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0a 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.304000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.304000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef3020
<7>[   89.304000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
<7>[   89.304000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfe200 len 20 n_items 1
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 07 00 00 06 90 00 00 0a 00 00 00  ................
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0b 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.304000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.304000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 85cade60
<7>[   89.304000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
<7>[   89.304000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cfec20 len 20 n_items 1
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 08 00 00 06 90 00 00 29 00 00 00  ............)...
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   89.304000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef3020
<7>[   89.304000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
<7>[   89.304000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cff640 len 20 n_items 1
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 09 00 00 06 90 00 00 1f 00 00 00  ................
<7>[   89.304000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   89.304000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 85cade60
<7>[   89.304000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
<7>[   89.308000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.308000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0c 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.308000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   89.308000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.308000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0d 00 00 01 04 00 00 02 01 00 00  ................
<7>[   89.308000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.308000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05cff760 len 20 n_items 1
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 0a 00 00 06 90 00 00 21 00 00 00  ............!...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   89.312000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef3020
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq
5180 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq
5200 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq
5220 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq
5240 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq
5260 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq
5280 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq
5300 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq
5320 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq
5500 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq
5520 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq
5540 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq
5560 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq
5580 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq
5600 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq
5620 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq
5640 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq
5660 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq
5680 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq
5700 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   89.312000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d02fc0 len 472 n_items 1
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 d0 01 00 0b 00 00 02 90 00 00 13 00 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3c
14 00 00 3c 14 00 00 00 00 00 00 40 19 00 00  <...<.......@...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
28 28 00 00 00 00 00 50 14 00 00 50 14 00 00  .((.....P...P...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 40 19 00 00 00 28 28 00 00 00 00 00  ....@....((.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 64
14 00 00 64 14 00 00 00 00 00 00 40 19 00 00  d...d.......@...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
28 28 00 00 00 00 00 78 14 00 00 78 14 00 00  .((.....x...x...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 40 19 00 00 00 28 28 00 00 00 00 00  ....@....((.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 8c
14 00 00 8c 14 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
28 28 00 00 00 00 00 a0 14 00 00 a0 14 00 00  .((.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000090: 00
00 00 00 c0 1c 00 00 00 28 28 00 00 00 00 00  .........((.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000a0: b4
14 00 00 b4 14 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000b0: 00
28 28 00 00 00 00 00 c8 14 00 00 c8 14 00 00  .((.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000c0: 00
00 00 00 80 1c 00 00 00 28 28 00 00 00 00 00  .........((.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000d0: 7c
15 00 00 7c 15 00 00 00 00 00 00 c0 1c 00 00  |...|...........
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000e0: 00
36 36 00 00 00 00 00 90 15 00 00 90 15 00 00  .66.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000000f0: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000100: a4
15 00 00 a4 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000110: 00
36 36 00 00 00 00 00 b8 15 00 00 b8 15 00 00  .66.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000120: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000130: cc
15 00 00 cc 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000140: 00
36 36 00 00 00 00 00 e0 15 00 00 e0 15 00 00  .66.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000150: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000160: f4
15 00 00 f4 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000170: 00
36 36 00 00 00 00 00 08 16 00 00 08 16 00 00  .66.............
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000180: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 00000190: 1c
16 00 00 1c 16 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000001a0: 00
36 36 00 00 00 00 00 30 16 00 00 30 16 00 00  .66.....0...0...
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000001b0: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000001c0: 44
16 00 00 44 16 00 00 00 00 00 00 80 1c 00 00  D...D...........
<7>[   89.312000] ath10k_pci 0000:02:00.0: pci tx data: 000001d0: 00
36 36 00 00 00 00 00                          .66.....
<7>[   89.312000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37
rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
<7>[   89.312000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef3020
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0e 00 00 01 04 00 00 02 01 00 00  ................
<7>[   89.316000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0f 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.316000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.316000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d032a0 len 36 n_items 1
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 1c 00 00 0c 00 00 04 90 00 00 37 00 00 00  ............7...
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 37
00 00 00 37 00 00 00 30 00 00 00 30 00 00 00  7...7...0...0...
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 02
00 00 00                                      ....
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.316000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 10 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.316000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.316000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef4c20
<7>[   89.316000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
<7>[   89.316000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
<7>[   89.316000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type
1 subtype 0 macaddr c8:pr:iv:at:e0:c1
<7>[   89.316000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06f19240 len 32 n_items 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 18 00 00 0d 00 00 10 90 00 00 00 00 00 00  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00 00 00 00 00 c8 pr iv at e0 c1 00 00  ...........U....
<7>[   89.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef4c20
<7>[   89.320000] ath10k_pci 0000:02:00.0: vdev param 0 not supported
by firmware
<7>[   89.320000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06f19360 len 24 n_items 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 ff 0e ff ff 1c 90 00 00 00 00 00 00  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c8
pr iv at e0 c1 00 00                          ...U....
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 11 00 00 03 00 9a 00 c8 91 f9 55  ...............U
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 8c c1 00
00                                      ....
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   89.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 1 skb 86ef30e0
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 86ef2e60
<7>[   89.320000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x3
<7>[   89.320000] ath10k_pci 0000:02:00.0: htt peer map vdev 0 peer
c8:pr:iv:at:e0:c1 id 154
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 12 00 00 03 00 8a 00 c8 91 f9 55  ...............U
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 8c c1 00
00                                      ....
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 860589e0
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06109240 len 24 n_items 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 08 17 00 00 19 90 00 00 00 00 00 00  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 2b
00 00 00 11 00 00 00                          +.......
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 1d 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef4c20
<7>[   89.320000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06109360 len 24 n_items 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 18 00 00 19 90 00 00 00 00 00 00  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 18
00 00 00 00 00 00 00                          ........
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 1e 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef30e0
<7>[   89.320000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610a680 len 24 n_items 1
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 19 00 00 19 90 00 00 00 00 00 00  ................
<7>[   89.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 07
00 00 00 01 00 00 00                          ........
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 1f 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef30e0
<7>[   89.324000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 1n
<7>[   89.324000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 1
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610b0a0 len 24 n_items 1
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 65 1a 31 0a 19 90 00 00 00 00 00 00  ....e.1.........
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 08
00 00 00 01 00 00 00                          ........
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 20 00 00 01 04 00 01 02 01 b4 06  ..... ..........
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef30e0
<7>[   89.324000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610bac0 len 108 n_items 1
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 6b 1b 20 31 09 90 00 00 00 00 00 00  ..d.k. 1........
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 23 00 00 01 04 00 01 02 01 b4 06  .....#..........
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610d140 len 108 n_items 1
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 08 1e 00 00 09 90 00 00 0f 00 00 00  ..d.............
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: ff
03 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 02 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 02 00 00 00  ................
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   89.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef4c20
<7>[   89.324000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.324000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 24 00 00 01 04 00 01 02 01 b4 06  .....$..........
<7>[   89.324000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<6>[   89.324000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[   89.336000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<6>[   89.344000] device wlan0 entered promiscuous mode
<7>[   89.348000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   89.348000] ath10k_pci 0000:02:00.0: wmi 10x start scan
<7>[   89.348000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d087a0 len 164 n_items 1
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 9c 00 00 1f 00 00 00 90 00 00 00 a0 00 00  ................
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
a0 00 00 00 00 00 00 01 00 00 00 1f 00 00 00  ................
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 32
00 00 00 96 00 00 00 32 00 00 00 f4 01 00 00  2.......2.......
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 20 4e 00 00  ............ N..
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 05
00 00 00 1d 00 00 00 01 00 00 00 02 00 00 00  ................
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 3c
14 00 00 50 14 00 00 03 00 00 00 01 00 00 00  <...P...........
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: ff
ff ff ff ff ff 00 00 04 00 00 00 34 00 00 00  ............4...
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 01
08 0c 12 18 24 30 48 60 6c 2d 1a e3 19 1b ff  .....$0H`l-.....
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: ff
ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00  ................
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 00000090: 00
00 00 00 00 00 bf 0c b2 01 80 33 ea ff 00 00  ...........3....
<7>[   89.348000] ath10k_pci 0000:02:00.0: pci tx data: 000000a0: ea
ff 00 00                                      ....
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 25 00 00 00 90 00 00 01 00 00 00  .....%..........
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 00 00 00 00 01 a0 00 00 00 a0 00 00  ................
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.352000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc920
<7>[   89.352000] ath10k_pci 0000:02:00.0: scan event started type 1
reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state starting
(1)
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 26 00 00 00 90 00 00 04 00 00 00  .....&..........
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 00 00 00 00 01 a0 00 00 00 a0 00 00  ................
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.352000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc860
<7>[   89.352000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 0 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
<7>[   89.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 85cad9e0
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 27 00 00 01 04 00 01 02 01 b4 06  .....'..........
<7>[   89.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 28
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 14
00 00 28 00 00 0f 00 00 00 3c 14 00 00  .....(......<...
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 3c 14 00
00 00 00 00 00 00 00 00 00              <...........
<7>[   89.352000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   89.352000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 8656f7a0
<7>[   89.352000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xF
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 29 00 00 00 90 00 00 08 00 00 00  .....)..........
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 3c 14 00 00 01 a0 00 00 00 a0 00 00  ....<...........
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.356000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc7a0
<7>[   89.356000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 40
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 20
00 00 2a 00 00 0c 90 00 00 00 00 00 00  .. ..*..........
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 3c 14 00
00 00 00 00 00 00 00 00 00 76 62 17 00  <...........vb..
<7>[   89.356000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 8b c1 56
00 d8 00 00 00                          ..V.....
<7>[   89.356000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc6e0
<7>[   89.356000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5180 cmd_flags 0 noise_floor 0 rx_clear_count 1532534 cycle_count
5685643
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 2b 00 00 00 90 00 00 04 00 00 00  .....+..........
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 3c 14 00 00 01 a0 00 00 00 a0 00 00  ....<...........
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.500000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc620
<7>[   89.500000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 5180 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 40
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 20
00 00 2c 00 00 0c 90 00 00 00 00 00 00  .. ..,..........
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 3c 14 00
00 01 00 00 00 9a ff ff ff 76 62 17 00  <...........vb..
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000020: d4 d9 1a
01 d8 00 00 00                          ........
<7>[   89.500000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc560
<7>[   89.500000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5180 cmd_flags 1 noise_floor -102 rx_clear_count 1532534 cycle_count
18536916
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 28
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 14
00 00 2d 00 00 0f 00 00 00 50 14 00 00  .....-......P...
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 50 14 00
00 00 00 00 00 00 00 00 00              P...........
<7>[   89.500000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   89.500000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 8656f6e0
<7>[   89.500000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xF
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 2e 00 00 00 90 00 00 08 00 00 00  ................
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 50 14 00 00 01 a0 00 00 00 a0 00 00  ....P...........
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.504000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc4a0
<7>[   89.504000] ath10k_pci 0000:02:00.0: scan event foreign channel
type 8 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 40
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 20
00 00 2f 00 00 0c 90 00 00 00 00 00 00  .. ../..........
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 50 14 00
00 00 00 00 00 00 00 00 00 4d 63 17 00  P...........Mc..
<7>[   89.504000] ath10k_pci 0000:02:00.0: pci rx: 00000020: d3 3c 20
01 b0 01 00 00                          .< .....
<7>[   89.504000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc3e0
<7>[   89.504000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5200 cmd_flags 0 noise_floor 0 rx_clear_count 1532749 cycle_count
18889939
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 30 00 00 00 90 00 00 04 00 00 00  .....0..........
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 03 00 00
00 50 14 00 00 01 a0 00 00 00 a0 00 00  ....P...........
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.652000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc320
<7>[   89.652000] ath10k_pci 0000:02:00.0: scan event bss channel type
4 reason 3 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state
running (2)
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 40
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 20
00 00 31 00 00 0c 90 00 00 00 00 00 00  .. ..1..........
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 50 14 00
00 01 00 00 00 9a ff ff ff 57 68 17 00  P...........Wh..
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 7c 54 e4
01 c0 06 00 00                          |T......
<7>[   89.652000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc260
<7>[   89.652000] ath10k_pci 0000:02:00.0: chan info err_code 0 freq
5200 cmd_flags 1 noise_floor -102 rx_clear_count 1534039 cycle_count
31741052
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 36
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 1c
00 00 32 00 00 00 90 00 00 02 00 00 00  .....2..........
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 50 14 00 00 01 a0 00 00 00 a0 00 00  ....P...........
<7>[   89.652000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   89.652000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc1a0
<7>[   89.652000] ath10k_pci 0000:02:00.0: scan event completed type 2
reason 0 freq 5200 req_id 40961 scan_id 40960 vdev_id 0 state running
(2)
<7>[   90.160000] ath10k_pci 0000:02:00.0: mac chanctx add freq 5180
width 3 ptr 85caf930
<7>[   90.160000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   90.160000] ath10k_pci 0000:02:00.0: mac chanctx assign ptr
85caf930 vdev_id 0
<7>[   90.160000] ath10k_pci 0000:02:00.0: mac vdev 0 start
center_freq 5180 phymode 11ac-vht80
<7>[   90.160000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0
flags: 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
<7>[   90.160000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06229800 len 140 n_items 1
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 84 00 00 20 00 00 12 90 00 00 3c 14 00 00  ..... ......<...
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 5a
14 00 00 00 00 00 00 0a 00 00 00 00 28 28 00  Z............((.
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.160000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
00 00 00 00 00 00 00 00 00 00 00              ............
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 33 00 00 01 04 00 01 02 01 b4 06  .....3..........
<7>[   90.164000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.164000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef26e0
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 28
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 14
00 00 34 00 00 0f 00 00 00 3c 14 00 00  .....4......<...
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 5a 14 00
00 00 00 00 00 0a 00 00 00              Z...........
<7>[   90.164000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   90.164000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 8656f560
<7>[   90.164000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xF
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 28
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 14
00 00 35 00 00 04 90 00 00 00 00 00 00  .....5..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dc0e0
<7>[   90.172000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
<7>[   90.172000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[   90.172000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[   90.172000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0622cac0 len 20 n_items 1
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 21 00 00 06 90 00 00 03 00 00 00  .....!..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 28
00 00 00                                      (...
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 36 00 00 01 04 00 01 02 01 b4 06  .....6..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.172000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef24a0
<7>[   90.172000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0622cbe0 len 20 n_items 1
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 22 00 00 06 90 00 00 04 00 00 00  ....."..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 28
00 00 00                                      (...
<7>[   90.172000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef2ce0
<7>[   90.172000] ath10k_pci 0000:02:00.0: mac chanctx change freq
5180 width 3 ptr 85caf930 changed 2
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 37 00 00 01 04 00 01 02 01 b4 06  .....7..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.172000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0622d600 len 24 n_items 1
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 23 00 00 19 90 00 00 00 00 00 00  .....#..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 03
00 00 00 64 00 00 00                          ....d...
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 38 00 00 01 04 00 01 02 01 b4 06  .....8..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.172000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef2ce0
<7>[   90.172000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
<7>[   90.172000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode
to staggered
<7>[   90.172000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
<7>[   90.172000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0622e920 len 20 n_items 1
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 24 00 00 06 90 00 00 07 00 00 00  .....$..........
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   90.172000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 ff 2e ff ff 19 90 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 1f
00 00 00 01 00 00 00                          ........
<7>[   90.204000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef2620
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 06 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.204000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   90.204000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06119920 len 108 n_items 1
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 00 2f 00 00 09 90 00 00 0f 00 00 00  ..d../..........
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: ff
03 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 02 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   90.204000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780dda0
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 07 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.204000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611a3a0 len 108 n_items 1
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 ff 30 ff ff 09 90 00 00 0f 00 00 00  ..d..0..........
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: ff
03 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   90.204000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 85cadc20
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 08 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.204000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611ae20 len 108 n_items 1
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 ff 31 ff ff 09 90 00 00 0f 00 00 00  ..d..1..........
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3f
00 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ?...............
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   90.204000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780dda0
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 09 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.204000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   90.204000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611b8a0 len 108 n_items 1
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 ff 32 ff ff 09 90 00 00 0f 00 00 00  ..d..2..........
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3f
00 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ?...............
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   90.204000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   90.208000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.208000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0a 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.208000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.208000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 85cadc20
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 244
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 ec
00 00 0b 00 00 02 80 00 00 00 00 00 00  ................
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 39 64 01
00 2f 4c fc 17 03 00 00 00 1e 00 00 00  9d../L..........
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 60 04 00
00 60 04 00 00 00 00 00 00 39 64 01 00  `...`.......9d..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 2f 4c fc
17 12 00 00 00 1e 00 00 00 60 04 00 00  /L..........`...
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 60 04 00
00 00 00 00 00 39 64 01 00 2f 4c fc 17  `.......9d../L..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 45 00 00
00 1e 00 00 00 60 04 00 00 60 04 00 00  E.......`...`...
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 00 00 00
00 39 64 01 00 2f 4c fc 17 67 00 00 00  ....9d../L..g...
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 1e 00 00
00 60 04 00 00 60 04 00 00 00 00 00 00  ....`...`.......
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000080: 3e 64 01
00 10 0c fc 0b 8a 29 10 01 03 00 00 00  >d.......)......
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 00000090: 3e 64 01
00 13 0c fc 03 45 64 01 00 23 4c fc 0f  >d......Ed..#L..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000a0: 01 00 00
00 01 00 00 00 01 00 00 00 52 64 01 00  ............Rd..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000b0: 23 4c fc
0f 01 00 00 00 01 00 00 00 01 00 00 00  #L..............
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000c0: 52 64 01
00 0c 64 fc 07 01 00 00 00 59 64 01 00  Rd...d......Yd..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000d0: 23 4c fc
0f 01 00 00 00 01 00 00 00 01 00 00 00  #L..............
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000e0: df 67 01
00 1e 4c fc 03 df 67 01 00 1d 4c fc 07  .g...L...g...L..
<7>[   90.276000] ath10k_pci 0000:02:00.0: pci rx: 000000f0: 01 00 00
00                                      ....
<7>[   90.276000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860ddf20
<7>[   90.276000] ath10k_pci 0000:02:00.0: wmi event debug mesg len 232
<7>[   90.292000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 48
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 28
00 00 0c 00 00 09 90 00 00 01 00 00 00  ..(.............
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.400000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860dde60
<7>[   90.400000] ath10k_pci 0000:02:00.0: mgmt swba vdev_map 0x1
<7>[   90.400000] ath10k_pci 0000:02:00.0: mgmt event bcn_info 0
tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap
0x00000000000000000000000000000000
<7>[   90.400000] ath10k_pci 0000:02:00.0: dtim 1/2 mcast 0 pvmlen 1
<7>[   90.400000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d61940 len 40 n_items 1
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 20 00 00 33 00 00 57 90 00 00 00 00 00 00  .. ..3..W.......
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c3
00 00 00 00 e0 ca 05 00 00 00 00 80 00 00 00  ................
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00                          ........
<7>[   90.400000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef39e0
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   90.400000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0d 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   90.400000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 48
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 28
00 00 0e 00 00 09 90 00 00 01 00 00 00  ..(.............
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   90.504000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860ddda0
<7>[   90.504000] ath10k_pci 0000:02:00.0: mgmt swba vdev_map 0x1
<7>[   90.504000] ath10k_pci 0000:02:00.0: mgmt event bcn_info 0
tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap
0x00000000000000000000000000000000
<7>[   90.504000] ath10k_pci 0000:02:00.0: dtim 0/2 mcast 0 pvmlen 1
<7>[   90.504000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d63e20 len 40 n_items 1
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 20 00 00 34 00 00 57 90 00 00 00 00 00 00  .. ..4..W.......
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c3
00 00 00 00 e0 ca 05 00 00 00 00 80 00 00 00  ................
<7>[   90.504000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 01
00 00 00 00 00 00 00                          ........
<3>[   90.580000] ath10k_pci 0000:02:00.0: firmware crashed! (uuid
de6277f0-b8e9-488c-a1a7-9f4e41f54752)
<6>[   90.588000] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal file max_sta 128
<6>[   90.600000] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0
dfs 1 testmode 1
<4>[   90.620000] ath10k_pci 0000:02:00.0: failed to read diag value
at 0x1c100804: -16
<4>[   90.624000] ath10k_pci 0000:02:00.0: failed to get memcpy hi
address for firmware address 4: -16
<3>[   90.632000] ath10k_pci 0000:02:00.0: failed to read firmware
dump area: -16
<7>[   90.640000] ath10k_pci 0000:02:00.0: boot hif stop
<7>[   90.640000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[   90.708000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.716000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.728000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.736000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.748000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.756000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.768000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.776000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.788000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.796000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.808000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.816000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.828000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.836000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.848000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.856000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.868000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.876000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.888000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.896000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.908000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.920000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.928000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.940000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.948000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.960000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.968000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.980000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   90.988000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.000000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.008000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.020000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.028000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.040000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.048000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.060000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.068000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.080000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.088000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.100000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.108000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.120000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.128000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.140000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.148000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.160000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.168000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.180000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   91.192000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi read address 0x400810 length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi write address 0x400810 length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi write address 0x400844 length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi write address 0x400904 length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi read address 0x4008ac length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: boot push board extended
data addr 0x0
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi read address 0x400854 length 4
<7>[   94.284000] ath10k_pci 0000:02:00.0: bmi write address 0x401cc0
length 2116
<7>[   94.288000] ath10k_pci 0000:02:00.0: bmi write address 0x400858 length 4
<7>[   94.288000] ath10k_pci 0000:02:00.0: boot cal file downloaded
<7>[   94.288000] ath10k_pci 0000:02:00.0: boot using calibration mode file
<7>[   94.288000] ath10k_pci 0000:02:00.0: boot uploading firmware
image c03afc64 len 237784 mode normal
<7>[   94.288000] ath10k_pci 0000:02:00.0: bmi fast download address
0x1234 buffer 0xc03afc64 length 237784
<7>[   94.288000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x1234
<7>[   94.288000] ath10k_pci 0000:02:00.0: bmi lz data buffer
0xc03afc64 length 237784
<7>[   95.292000] ath10k_pci 0000:02:00.0: bmi lz stream start address 0x0
<7>[   95.292000] ath10k_pci 0000:02:00.0: bmi write address 0x400814 length 4
<7>[   95.292000] ath10k_pci 0000:02:00.0: pci hif set callbacks
<7>[   95.292000] ath10k_pci 0000:02:00.0: pci hif get default pipe
<7>[   95.292000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   95.292000] ath10k_pci 0000:02:00.0: bmi done
<7>[   95.292000] ath10k_pci 0000:02:00.0: htt tx max num pending tx 1424
<7>[   95.292000] ath10k_pci 0000:02:00.0: htt rx ring size 2048 fill_level 1023
<7>[   95.292000] ath10k_pci 0000:02:00.0: boot hif start
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 00 00 00 01 00 02 00 00 07 16 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00                                      ....
<7>[   95.296000] ath10k_pci 0000:02:00.0: Target ready! transmit
resources: 2 size:1792
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
ul pipe 0 dl pipe 1 eid 0 ready
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc ep 0 ul polled 0 dl polled 0
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service 'Control'
eid 0 TX flow control disabled
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service HTT Data
does not allocate target credits
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05c07cac len 16 n_items 1
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 08 00 00 06 02 00 02 00 00 03 08 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 01 00 00 03 00 00 03 00 01 d0 07  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00                                      ....
<7>[   95.296000] ath10k_pci 0000:02:00.0: HTC Service HTT Data
connect response: status: 0x0, assigned ep: 0x1
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
ul pipe 4 dl pipe 1 eid 1 ready
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc ep 1 ul polled 1 dl polled 0
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service 'HTT Data'
eid 1 TX flow control disabled
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05c0894c len 16 n_items 1
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 08 00 ff 07 ff ff 02 00 00 01 00 02 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 0c
00 00 02 00 00 03 00 00 01 00 02 b4 06  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00                                      ....
<7>[   95.296000] ath10k_pci 0000:02:00.0: HTC Service WMI connect
response: status: 0x0, assigned ep: 0x2
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci hif map service
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc service 'WMI' ul
pipe 3 dl pipe 2 eid 2 ready
<7>[   95.296000] ath10k_pci 0000:02:00.0: boot htc ep 2 ul polled 0 dl polled 0
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_build_tx_ctrl_skb: skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: HTC is using TX credit flow control
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05c0946c len 20 n_items 1
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 00
01 0c 00 00 08 00 00 05 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   95.296000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 0 skb 86ef4e60
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 180
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 ac
00 00 03 00 00 00 80 00 00 46 00 00 41  ............F..A
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00 01 00 00 00 0a 00 00 00 0e 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 07 00 00
00 07 00 00 00 09 00 00 00 0f 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 0a 00 00
00 03 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 03 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 5b 08 00
00 b2 01 80 33 ea ff 00 00 3f 00 00 00  [......3....?...
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 3f 00 00
00 3a 83 00 00 1f 00 00 00 07 00 00 00  ?...:...........
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000080: c0 0b 00
00 01 90 1f 00 08 09 00 00 ac 0a 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 00000090: 2e 13 00
00 d4 17 00 00 00 00 00 00 04 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 000000a0: 01 00 00
00 01 00 00 00 b8 01 00 00 02 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci rx: 000000b0: 00 00 00
00                                      ....
<7>[   95.296000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f4920
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi svc: 00000000: 0e 00 00
00 07 00 00 00 07 00 00 00 09 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi svc: 00000010: 0f 00 00
00 0a 00 00 00 03 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi svc: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi svc: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi mem_req_id 1 num_units
0 num_unit_info 2 unit size 440 actual units 145
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi event service ready
min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b
vht_cap 0x338001b2 sw_ver0 0x41000046 sw_ver1 0x00000000 fw_build
0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000003 eeprom_rd
0x0000833a num_mem_reqs 0x00000001
<7>[   95.296000] ath10k_pci 0000:02:00.0: firmware 10.2.4.70-2 booted
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi chunk 0 len 63800
requested, addr 0x5c10000
<7>[   95.296000] ath10k_pci 0000:02:00.0: wmi init 10.2
<7>[   95.296000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05c09f80 len 176 n_items 1
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 a8 00 ff 36 ff ff 00 a0 00 00 10 00 00 00  .....6..........
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 90
00 00 00 02 00 00 00 00 01 00 00 80 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 07
00 00 00 07 00 00 00 64 00 00 00 64 00 00 00  ........d...d...
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 64
00 00 00 28 00 00 00 01 00 00 00 04 00 00 00  d...(...........
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 02
00 00 00 02 00 00 00 08 00 00 00 00 00 00 00  ................
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 04 00 00 20 00 00 00  ............ ...
<7>[   95.296000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 01
00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
<7>[   95.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 90
05 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.300000] ath10k_pci 0000:02:00.0: pci tx data: 00000090: 01
00 00 00 01 00 00 00 01 00 00 00 00 00 c1 05  ................
<7>[   95.300000] ath10k_pci 0000:02:00.0: pci tx data: 000000a0: 38
f9 00 00 00 00 00 00 00 00 00 00 00 00 00 00  8...............
<7>[   95.300000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef4e60
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 140
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 84
00 00 04 00 00 10 90 00 00 50 20 31 34  ............P 14
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 35 20 56
20 31 36 20 54 20 34 34 33 0a 00 00 00  5 V 16 T 443....
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000080: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   95.308000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f4860
<7>[   95.308000] ath10k_pci 0000:02:00.0: wmi print 'P 145 V 16 T 443'
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 140
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 84
00 00 05 00 00 10 90 00 00 5f 77 6c 61  ............_wla
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 6e 5f 72
74 74 5f 65 6e 61 62 6c 65 00 00 00 00  n_rtt_enable....
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000050: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000060: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000070: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.308000] ath10k_pci 0000:02:00.0: pci rx: 00000080: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   95.308000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f47a0
<7>[   95.308000] ath10k_pci 0000:02:00.0: wmi print '_wlan_rtt_enable'
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 07 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 32
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 18
00 00 06 00 00 01 80 00 00 46 00 00 41  ............F..A
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 01 00 00
00 c8 pr iv at e0 c1 00 00 00 00 00 00  .......U........
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f46e0
<7>[   95.320000] ath10k_pci 0000:02:00.0: wmi event ready sw_version
1090519110 abi_version 1 mac_addr c8:pr:iv:at:e0:c1 status 0
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637a2c0 len 12 n_items 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 01
01 04 00 ff 04 ff ff 00 ff ff ff              ............
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 04
00 00 08 00 00 00 01 02 00              ............
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 1 skb 86348ce0
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85cac3e0
<7>[   95.320000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x0
<7>[   95.320000] ath10k_pci 0000:02:00.0: htt target version 2.1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637ace0 len 48 n_items 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 01
01 28 00 00 05 a4 00 02 01 43 5e 00 e0 0d 06  ..(.......C^....
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
a0 0e 06 00 08 80 07 ff ff ff 03 2f 00 3f 00  ............/.?.
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 0f
00 19 00 03 00 0e 00 06 00 09 00 01 00 02 00  ................
<7>[   95.320000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637ae20 len 12 n_items 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 04 00 ff 37 ff ff 08 90 00 00              .....7......
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 09 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348c20
<7>[   95.320000] ath10k_pci 0000:02:00.0: wmi pdev set param 30 value 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637af40 len 20 n_items 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 65 38 57 72 06 90 00 00 1e 00 00 00  ....e8Wr........
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0a 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.320000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348c20
<7>[   95.320000] ath10k_pci 0000:02:00.0: wmi pdev set param 10 value 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637b960 len 20 n_items 1
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 ff 39 ff ff 06 90 00 00 0a 00 00 00  .....9..........
<7>[   95.320000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   95.324000] ath10k_pci 0000:02:00.0: wmi pdev set param 41 value 0
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0b 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.324000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348b60
<7>[   95.324000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637c380 len 20 n_items 1
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 b2 3a 80 33 06 90 00 00 29 00 00 00  .....:.3....)...
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   95.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348c20
<7>[   95.324000] ath10k_pci 0000:02:00.0: wmi pdev set param 31 value 0
<7>[   95.324000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637cda0 len 20 n_items 1
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 ff 3b ff ff 06 90 00 00 1f 00 00 00  .....;..........
<7>[   95.324000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   95.324000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348b60
<7>[   95.324000] ath10k_pci 0000:02:00.0: wmi pdev set param 33 value 1
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0c 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.328000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0d 00 00 01 04 00 00 02 01 00 00  ................
<7>[   95.328000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.328000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0637cec0 len 20 n_items 1
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 ff 3c ff ff 06 90 00 00 21 00 00 00  .....<......!...
<7>[   95.328000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00                                      ....
<7>[   95.328000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348c20
<7>[   95.328000] ath10k_pci 0000:02:00.0: mac channel [0/19] freq
5180 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.328000] ath10k_pci 0000:02:00.0: mac channel [1/19] freq
5200 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.328000] ath10k_pci 0000:02:00.0: mac channel [2/19] freq
5220 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [3/19] freq
5240 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [4/19] freq
5260 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [5/19] freq
5280 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [6/19] freq
5300 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [7/19] freq
5320 maxpower 40 regpower 40 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [8/19] freq
5500 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [9/19] freq
5520 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [10/19] freq
5540 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [11/19] freq
5560 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [12/19] freq
5580 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [13/19] freq
5600 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [14/19] freq
5620 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [15/19] freq
5640 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [16/19] freq
5660 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [17/19] freq
5680 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: mac channel [18/19] freq
5700 maxpower 54 regpower 54 antenna 0 mode 0
<7>[   95.332000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06108940 len 472 n_items 1
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 d0 01 08 3d 00 00 02 90 00 00 13 00 00 00  .....=..........
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3c
14 00 00 3c 14 00 00 00 00 00 00 40 19 00 00  <...<.......@...
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
28 28 00 00 00 00 00 50 14 00 00 50 14 00 00  .((.....P...P...
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 40 19 00 00 00 28 28 00 00 00 00 00  ....@....((.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 64
14 00 00 64 14 00 00 00 00 00 00 40 19 00 00  d...d.......@...
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
28 28 00 00 00 00 00 78 14 00 00 78 14 00 00  .((.....x...x...
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 40 19 00 00 00 28 28 00 00 00 00 00  ....@....((.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 8c
14 00 00 8c 14 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
28 28 00 00 00 00 00 a0 14 00 00 a0 14 00 00  .((.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000090: 00
00 00 00 c0 1c 00 00 00 28 28 00 00 00 00 00  .........((.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000a0: b4
14 00 00 b4 14 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000b0: 00
28 28 00 00 00 00 00 c8 14 00 00 c8 14 00 00  .((.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000c0: 00
00 00 00 80 1c 00 00 00 28 28 00 00 00 00 00  .........((.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000d0: 7c
15 00 00 7c 15 00 00 00 00 00 00 c0 1c 00 00  |...|...........
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000e0: 00
36 36 00 00 00 00 00 90 15 00 00 90 15 00 00  .66.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000000f0: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000100: a4
15 00 00 a4 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000110: 00
36 36 00 00 00 00 00 b8 15 00 00 b8 15 00 00  .66.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000120: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000130: cc
15 00 00 cc 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000140: 00
36 36 00 00 00 00 00 e0 15 00 00 e0 15 00 00  .66.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000150: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000160: f4
15 00 00 f4 15 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000170: 00
36 36 00 00 00 00 00 08 16 00 00 08 16 00 00  .66.............
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000180: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 00000190: 1c
16 00 00 1c 16 00 00 00 00 00 00 c0 1c 00 00  ................
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000001a0: 00
36 36 00 00 00 00 00 30 16 00 00 30 16 00 00  .66.....0...0...
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000001b0: 00
00 00 00 c0 1c 00 00 00 36 36 00 00 00 00 00  .........66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000001c0: 44
16 00 00 44 16 00 00 00 00 00 00 80 1c 00 00  D...D...........
<7>[   95.332000] ath10k_pci 0000:02:00.0: pci tx data: 000001d0: 00
36 36 00 00 00 00 00                          .66.....
<7>[   95.332000] ath10k_pci 0000:02:00.0: wmi pdev regdomain rd 37
rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 2
<7>[   95.332000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348c20
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0e 00 00 01 04 00 00 02 01 00 00  ................
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 0f 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06108c20 len 36 n_items 1
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 1c 00 74 3e 30 20 04 90 00 00 37 00 00 00  ....t>0 ....7...
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 37
00 00 00 37 00 00 00 30 00 00 00 30 00 00 00  7...7...0...0...
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 02
00 00 00                                      ....
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 10 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.336000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.336000] ath10k_pci 0000:02:00.0: mac create vdev 0 map ffff
<7>[   95.336000] ath10k_pci 0000:02:00.0: mac vdev create 0 (add
interface) type 1 subtype 0 bcnmode single-buf
<7>[   95.336000] ath10k_pci 0000:02:00.0: WMI vdev create: id 0 type
1 subtype 0 macaddr c8:pr:iv:at:e0:c1
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610d4a0 len 32 n_items 1
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 18 00 80 3f 10 00 10 90 00 00 00 00 00 00  .....?..........
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 01
00 00 00 00 00 00 00 c8 pr iv at e0 c1 00 00  ...........U....
<7>[   95.336000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.336000] ath10k_pci 0000:02:00.0: vdev param 0 not supported
by firmware
<7>[   95.336000] ath10k_pci 0000:02:00.0: wmi peer create vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[   95.336000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 0)
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610d5c0 len 24 n_items 1
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 80 40 10 00 1c 90 00 00 00 00 00 00  .....@..........
<7>[   95.336000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c8
pr iv at e0 c1 00 00                          ...U....
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 11 00 00 03 00 9a 00 c8 91 f9 55  ...............U
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 8c c1 00
00                                      ....
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 1 skb 86348ce0
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85cacaa0
<7>[   95.340000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x3
<7>[   95.340000] ath10k_pci 0000:02:00.0: htt peer map vdev 0 peer
c8:pr:iv:at:e0:c1 id 154
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 12 00 00 03 00 8a 00 c8 91 f9 55  ...............U
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 8c c1 00
00                                      ....
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85cacb60
<7>[   95.340000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x3
<7>[   95.340000] ath10k_pci 0000:02:00.0: htt peer map vdev 0 peer
c8:pr:iv:at:e0:c1 id 138
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 13 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 14 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.340000] ath10k_pci 0000:02:00.0: wmi pdev set param 13 value 320
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610fae0 len 20 n_items 1
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 07 41 59 40 06 90 00 00 0d 00 00 00  .....AY@........
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 40
01 00 00                                      @...
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 15 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.340000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
38 value 3747
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0610fc00 len 24 n_items 1
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 42 00 38 19 90 00 00 00 00 00 00  .....B.8........
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 26
00 00 00 a3 0e 00 00                          &.......
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.340000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
39 value 3895
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 16 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d08940 len 24 n_items 1
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 43 00 00 19 90 00 00 00 00 00 00  .....C..........
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 27
00 00 00 37 0f 00 00                          '...7...
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 17 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.340000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param
40 value 3900
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d09360 len 24 n_items 1
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 44 00 00 19 90 00 00 00 00 00 00  .....D..........
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 28
00 00 00 3c 0f 00 00                          (...<...
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.340000] ath10k_pci 0000:02:00.0: mac vdev 0 start
center_freq 5180 phymode 11ac-vht80
<7>[   95.340000] ath10k_pci 0000:02:00.0: wmi vdev start id 0x0
flags: 0x0, freq 5180, mode 10, ch_flags: 0xA000000, max_power: 40
<7>[   95.340000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d0cf00 len 140 n_items 1
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 84 00 00 49 00 00 12 90 00 00 3c 14 00 00  .....I......<...
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 5a
14 00 00 00 00 00 00 0a 00 00 00 00 28 28 00  Z............((.
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.340000] ath10k_pci 0000:02:00.0: pci tx data: 00000080: 00
00 00 00 00 00 00 00 00 00 00 00              ............
<7>[   95.340000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 8780df20
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 1d 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.344000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 28
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 14
00 00 1e 00 00 0f 00 00 00 3c 14 00 00  ............<...
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 5a 14 00
00 00 00 00 00 0a 00 00 00              Z...........
<7>[   95.344000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.344000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85cab4a0
<7>[   95.344000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xF
<7>[   95.348000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 28
<7>[   95.348000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 14
00 00 1f 00 00 04 90 00 00 00 00 00 00  ................
<7>[   95.348000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00              ............
<7>[   95.348000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f4620
<7>[   95.348000] ath10k_pci 0000:02:00.0: WMI_VDEV_START_RESP_EVENTID
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca1800 len 108 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 00 4a 00 00 09 90 00 00 00 00 00 00  ..d..J..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 20 00 00 01 04 00 01 02 01 b4 06  ..... ..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca2280 len 108 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 00 4b 00 00 09 90 00 00 00 00 00 00  ..d..K..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 21 00 00 01 04 00 01 02 01 b4 06  .....!..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca2400 len 108 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 00 4c 00 00 09 90 00 00 0f 00 00 00  ..d..L..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3f
00 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ?...............
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 22 00 00 01 04 00 01 02 01 b4 06  ....."..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi pdev set wmm params
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca2e80 len 108 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 64 00 00 4d 00 00 09 90 00 00 0f 00 00 00  ..d..M..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 3f
00 00 00 03 00 00 00 00 00 00 00 00 00 00 00  ?...............
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 0f 00 00 00 ff 03 00 00 07 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 0f
00 00 00 01 00 00 00 c0 0b 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 03 00 00 00 07 00 00 00 01 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: e0
05 00 00 00 00 00 00 00 00 00 00              ............
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 23 00 00 01 04 00 01 02 01 b4 06  .....#..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 3 value 100
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca4200 len 24 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 4e 00 00 19 90 00 00 00 00 00 00  .....N..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 03
00 00 00 64 00 00 00                          ....d...
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 24 00 00 01 04 00 01 02 01 b4 06  .....$..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac vdev 0 beacon_interval 100
<7>[   95.352000] ath10k_pci 0000:02:00.0: vdev 0 set beacon tx mode
to staggered
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi pdev set param 7 value 0
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca4c20 len 20 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 00 4f 00 00 06 90 00 00 07 00 00 00  .....O..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00                                      ....
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 25 00 00 01 04 00 01 02 01 b4 06  .....%..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac vdev 0 dtim_period 2
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 13 value 2
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca5640 len 24 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 50 00 00 19 90 00 00 00 00 00 00  .....P..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 0d
00 00 00 02 00 00 00                          ........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 26 00 00 01 04 00 01 02 01 b4 06  .....&..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi mgmt vdev up id 0x0
assoc id 0 bssid c8:pr:iv:at:e0:c1
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca5760 len 28 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 14 00 00 51 00 00 14 90 00 00 00 00 00 00  .....Q..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00 c8 pr iv at e0 c1 00 00              .......U....
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac vdev 0 up
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 80
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 48
00 00 27 00 00 0a 90 00 00 01 00 00 00  ..H..'..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000030: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000040: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f4560
<7>[   95.352000] ath10k_pci 0000:02:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 28 00 00 01 04 00 01 02 01 b4 06  .....(..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac vdev 0 cts_prot 0
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 43 value 17
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca7380 len 24 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 52 00 00 19 90 00 00 00 00 00 00  .....R..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 2b
00 00 00 11 00 00 00                          +.......
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 29 00 00 01 04 00 01 02 01 b4 06  .....)..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 24 value 0
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05ca74a0 len 24 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 53 00 00 19 90 00 00 00 00 00 00  .....S..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 18
00 00 00 00 00 00 00                          ........
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 2a 00 00 01 04 00 01 02 01 b4 06  .....*..........
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.352000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.352000] ath10k_pci 0000:02:00.0: mac vdev 0 slot_time 2
<7>[   95.352000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 7 value 2
<7>[   95.352000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06380940 len 24 n_items 1
<7>[   95.352000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 ff 54 ff ff 19 90 00 00 00 00 00 00  .....T..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 07
00 00 00 02 00 00 00                          ........
<7>[   95.356000] ath10k_pci 0000:02:00.0: mac vdev 0 preamble 2n
<7>[   95.356000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 8 value 2
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 2b 00 00 01 04 00 01 02 01 b4 06  .....+..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.356000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06380a60 len 24 n_items 1
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 ff 55 ff ff 19 90 00 00 00 00 00 00  .....U..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 08
00 00 00 02 00 00 00                          ........
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 2c 00 00 01 04 00 01 02 01 b4 06  .....,..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.356000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.356000] ath10k_pci 0000:02:00.0: mac vdev_id 0 txpower 20
<7>[   95.356000] ath10k_pci 0000:02:00.0: mac txpower 20
<7>[   95.356000] ath10k_pci 0000:02:00.0: wmi pdev set param 3 value 40
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06381d80 len 20 n_items 1
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 ff 56 ff ff 06 90 00 00 03 00 00 00  .....V..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 28
00 00 00                                      (...
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 2d 00 00 01 04 00 01 02 01 b4 06  .....-..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.356000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86348ce0
<7>[   95.356000] ath10k_pci 0000:02:00.0: wmi pdev set param 4 value 40
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06381ea0 len 20 n_items 1
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 0c 00 ff 57 ff ff 06 90 00 00 04 00 00 00  .....W..........
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 28
00 00 00                                      (...
<7>[   95.356000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86805320
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.356000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 2e 00 00 01 04 00 01 02 01 b4 06  ................
<7>[   95.356000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.364000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 4 len 16
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d50f00 len 120 n_items 1
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 70 00 00 58 00 00 1a 90 00 00 00 00 00 00  ..p..X..........
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c8
pr iv at e0 c1 00 00 01 00 00 00 01 00 00 00  ...U............
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 04
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 00 00 00 10 00 00 00  ................
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 00 00 00 00 ff be 68 a1 33 51 af 0c  ..........h.3Q..
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 23
6c 60 d3 69 8e 7a ee                          #l`.i.z.
<7>[   95.364000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef20e0
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 2f 00 00 03 00 aa 00 c8 91 f9 55  ...../.........U
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 8c c1 00
00                                      ....
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa020
<7>[   95.364000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x3
<7>[   95.364000] ath10k_pci 0000:02:00.0: htt peer map vdev 0 peer
c8:pr:iv:at:e0:c1 id 170
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 36
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 1c
00 00 30 00 00 0b 06 aa 00 00 00 00 00  .....0..........
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 00 00 00
00                                      ....
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa0e0
<7>[   95.364000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xB
<7>[   95.364000] ath10k_pci 0000:02:00.0: sec ind peer_id 170 unicast 0 type 6
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 31 00 00 01 04 00 01 02 01 b4 06  .....1..........
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.364000] ath10k_pci 0000:02:00.0: wmi vdev id 0x0 set param 31 value 1
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d52b80 len 24 n_items 1
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 00 59 00 00 19 90 00 00 00 00 00 00  .....Y..........
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 1f
00 00 00 01 00 00 00                          ........
<7>[   95.364000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86ef20e0
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.364000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 32 00 00 01 04 00 01 02 01 b4 06  .....2..........
<7>[   95.364000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<6>[   95.364000] ath10k_pci 0000:02:00.0: device successfully recovered
<7>[   95.368000] ath10k_pci 0000:02:00.0: htt tx alloc msdu_id 0
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05d536c0 len 60 n_items 1
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 01
01 34 00 00 06 00 00 07 d5 36 c8 a0 35 d5 05  ..4.......6..5..
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: 00
00 00 00 1a 00 00 00 00 00 00 00 c0 00 00 00  ................
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: ff
ff ff ff ff ff c8 pr iv at e0 c1 c8 91 f9 55  .........U.....U
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 8c
c1 10 10 03 00 00 00 85 d5 36 f8              ..........6.
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 20
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 0c
00 00 33 00 00 13 00 00 00 00 00 00 00  .....3..........
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci rx: 00000010: 00 00 00
00                                      ....
<7>[   95.368000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.368000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 1 skb 86ef3560
<7>[   95.368000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa320
<7>[   95.368000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x13
<7>[   95.368000] ath10k_pci 0000:02:00.0: htt tx completion msdu_id 0
discard 0 no_ack 0 success 1
<7>[   95.368000] ath10k_pci 0000:02:00.0: htt tx free msdu_id 0
<6>[   95.376000] device wlan0 left promiscuous mode
<6>[   95.376000] br-lan: port 2(wlan0) entered disabled state
<7>[   95.384000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: wmi mgmt vdev down id 0x0
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06118f00 len 16 n_items 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 08 00 ff 5a ff ff 16 90 00 00 00 00 00 00  .....Z..........
<7>[   95.392000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 863489e0
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 34 00 00 01 04 00 01 02 01 b4 06  .....4..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.392000] ath10k_pci 0000:02:00.0: mac chanctx unassign ptr
85caf930 vdev_id 0
<7>[   95.392000] ath10k_pci 0000:02:00.0: wmi vdev stop id 0x0
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x06119920 len 16 n_items 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 08 00 00 5b 00 00 15 90 00 00 00 00 00 00  .....[..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 2 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 02 00 08
00 00 35 00 00 07 90 00 00 00 00 00 00  .....5..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc rx completion ep 2 skb 860f44a0
<7>[   95.392000] ath10k_pci 0000:02:00.0: WMI_VDEV_STOPPED_EVENTID
<7>[   95.392000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 863489e0
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 36 00 00 01 04 00 01 02 01 b4 06  .....6..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.392000] ath10k_pci 0000:02:00.0: mac chanctx remove freq
5180 width 3 ptr 85caf930
<7>[   95.392000] ath10k_pci 0000:02:00.0: mac monitor recalc started?
0 needed? 0 allowed? 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: wmi vdev install key idx 1
cipher 0 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611ac40 len 120 n_items 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 70 00 00 5c 00 00 1a 90 00 00 00 00 00 00  ..p..\..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c8
pr iv at e0 c1 00 00 01 00 00 00 01 00 00 00  ...U............
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000020: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000030: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000040: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000050: 00
00 00 00 00 00 00 00 00 00 00 00 10 00 00 00  ................
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000060: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000070: 00
00 00 00 00 00 00 00                          ........
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 36
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 1c
00 00 37 00 00 0b 00 aa 00 04 00 00 00  .....7..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000010: ff ff ff
ff 38 00 00 00 00 00 00 00 20 52 41 00  ....8....... RA.
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000020: 1c 00 00
01                                      ....
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa560
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0xB
<7>[   95.392000] ath10k_pci 0000:02:00.0: sec ind peer_id 170 unicast 0 type 0
<7>[   95.392000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86058260
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 38 00 00 01 04 00 01 02 01 b4 06  .....8..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.392000] ath10k_pci 0000:02:00.0: wmi peer delete vdev_id 0
peer_addr c8:pr:iv:at:e0:c1
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611bfc0 len 24 n_items 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 10 00 ff 5d ff ff 1d 90 00 00 00 00 00 00  .....]..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000010: c8
pr iv at e0 c1 00 00                          ...U....
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 39 00 00 01 04 00 01 02 01 b4 06  .....9..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.392000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86058260
<7>[   95.392000] ath10k_pci 0000:02:00.0: mac vdev 0 delete (remove interface)
<7>[   95.392000] ath10k_pci 0000:02:00.0: WMI vdev delete id 0
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611c9e0 len 16 n_items 1
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 08 00 b2 5e 80 33 11 90 00 00 00 00 00 00  .....^.3........
<7>[   95.392000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86058260
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 04
00 00 3a 00 00 04 00 9a 00              .....:......
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa7a0
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x4
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt peer unmap vdev 0 peer
c8:pr:iv:at:e0:c1 id 154
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 04
00 00 3b 00 00 04 00 8a 00              .....;......
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa860
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x4
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt peer unmap vdev 0 peer
c8:pr:iv:at:e0:c1 id 138
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 01 00 04
00 00 3c 00 00 04 00 aa 00              .....<......
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci hif send complete check
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc rx completion ep 1 skb 85caa920
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt rx, msg_type: 0x4
<7>[   95.392000] ath10k_pci 0000:02:00.0: htt peer unmap vdev 0 peer
c8:pr:iv:at:e0:c1 id 170
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 3d 00 00 01 04 00 01 02 01 b4 06  .....=..........
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.392000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.392000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x0611ef00 len 16 n_items 1
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 08 00 ff 5f ff ff 4b 90 00 00 01 00 00 00  ....._..K.......
<7>[   95.396000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86058260
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 16
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 02 08
00 08 3e 00 00 01 04 00 01 02 01 b4 06  .....>..........
<7>[   95.396000] ath10k_pci 0000:02:00.0: htc ep 2 got 1 credits (total 2)
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci rx ce pipe 1 len 12
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci rx: 00000000: 00 00 04
00 00 3f 00 00 06 00 00 01              .....?......
<7>[   95.396000] ath10k_pci 0000:02:00.0: boot suspend complete
<7>[   95.396000] ath10k_pci 0000:02:00.0: wmi disable pktlog
<7>[   95.396000] ath10k_pci 0000:02:00.0: htc ep 2 consumed 1 credits (total 1)
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci tx item 0 paddr
0x05c40940 len 12 n_items 1
<7>[   95.396000] ath10k_pci 0000:02:00.0: pci tx data: 00000000: 02
01 04 00 08 60 00 00 08 90 00 00              .....`......
<7>[   95.396000] ath10k_pci 0000:02:00.0:
ath10k_htc_notify_tx_completion: ep 2 skb 86058260
<7>[   95.396000] ath10k_pci 0000:02:00.0: boot hif stop
<7>[   95.396000] ath10k_pci 0000:02:00.0: boot warm reset
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[   95.428000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   95.436000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   95.448000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[   95.448000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot init ce src ring id 0
entries 16 base_addr a6828000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot ce dest ring id 1
entries 512 base_addr a6822000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot ce dest ring id 2
entries 128 base_addr a6829000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot init ce src ring id 3
entries 32 base_addr a682a000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot init ce src ring id 4
entries 4096 base_addr a6a00000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot init ce src ring id 7
entries 2 base_addr a682b000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot ce dest ring id 7
entries 2 base_addr a682c000
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot waiting target to initialise
<7>[   95.464000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   95.472000] ath10k_pci 0000:02:00.0: boot target indicator 0
<7>[   95.484000] ath10k_pci 0000:02:00.0: boot target indicator 2
<7>[   95.484000] ath10k_pci 0000:02:00.0: boot target initialised
<7>[   95.484000] ath10k_pci 0000:02:00.0: boot warm reset complete
<7>[   95.484000] ath10k_pci 0000:02:00.0: boot hif power down

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 18 July 2015 at 13:53, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hi Michal,
>
> On Tue, Jul 14, 2015 at 12:50 PM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> Do you guys know if 10.2-00082[1] crashes as well?
> I just tested that firmware version and it crashes with the same symptoms.
>
> And because you asked before: firmware-2.bin is the only firmware that
> does not crash (and thus managed to get other devices to connect to
> this AP).

Firmware file names aren't versions and don't use them as such. The
naming serves only for backward compatibility between firmware and
driver releases.

Use firmware version strings, please. I.e. 10.1.467-xxx.


>> If someone is brave enough with spare time one could attempt to
>> re-implement the old by-copy beaconing (which copies entire beacon
>> frame into WMI command instead of passing just dma pointer; see [2]
>> for reference) to see if it makes any difference. If that helps it
>> would imply the crash is indeed related to dma beaconing. If it
>> doesn't it would prove nothing though.
> I have written this hack to make it use non-DMA beacon transfers: [0]
> I am not sure whether it's correct or not, but it seems to suffer from
> the same problem: [1]

The patch looks good.

Can you post contents of your
/sys/kernel/debug/ieee80211/phy*/ath10k/wmi_services, please?

(for both 10.1.467 and any of 10.2 that crashes)


> You also requested a more detailed debug log - you can also find it here: [2].
> (my hack is not applied here)
> I chose debug mask 0xFFFFBFFF because I cannot read anything with
> ATH10K_DBG_PCI_PS enabled.

I'd recommend using traces[1] instead as they won't suffer from this
problem. Kernel log buffer isn't big enough to debug everything with
mere prints.

[1]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#tracing


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

On Mon, Jul 20, 2015 at 1:41 PM, Michal Kazior <michal.kazior@tieto.com> wrote:
> Firmware file names aren't versions and don't use them as such. The
> naming serves only for backward compatibility between firmware and
> driver releases.
>
> Use firmware version strings, please. I.e. 10.1.467-xxx.
I totally forgot about that, sorry.
The one that is working is firmware-2.bin_10.1.467.bin

I also misread one of your last emails. You asked about version "10.2-00082":
This version crashes as well (same symptoms).

> Can you post contents of your
> /sys/kernel/debug/ieee80211/phy*/ath10k/wmi_services, please?
>
> (for both 10.1.467 and any of 10.2 that crashes)
You can find the output with 10.1.467.2-1 here and at the end of this email: [0]
And the output with 10.2.4.70-2 can be found here: [1]
T
> I'd recommend using traces[1] instead as they won't suffer from this
> problem. Kernel log buffer isn't big enough to debug everything with
> mere prints.
Okay, I will do this tonight. Do you want trace-logs of the crashing
firmware (I will simply use 10.2.4.70-2 from now on) or also the
output on the working (10.1.467.2-1) one?


Regards,
Martin


[0] https://paste.kde.org/pp7qowsge
[1] https://paste.kde.org/p14zlrxtf


wmi_services with firmware 10.1.467.2-1:
WMI_SERVICE_BEACON_OFFLOAD               -
WMI_SERVICE_SCAN_OFFLOAD                 enabled
WMI_SERVICE_ROAM_OFFLOAD                 enabled
WMI_SERVICE_BCN_MISS_OFFLOAD             enabled
WMI_SERVICE_STA_PWRSAVE                  enabled
WMI_SERVICE_STA_ADVANCED_PWRSAVE         enabled
WMI_SERVICE_AP_UAPSD                     enabled
WMI_SERVICE_AP_DFS                       -
WMI_SERVICE_11AC                         enabled
WMI_SERVICE_BLOCKACK                     enabled
WMI_SERVICE_PHYERR                       enabled
WMI_SERVICE_BCN_FILTER                   enabled
WMI_SERVICE_RTT                          enabled
WMI_SERVICE_RATECTRL                     -
WMI_SERVICE_WOW                          enabled
WMI_SERVICE_RATECTRL_CACHE               enabled
WMI_SERVICE_IRAM_TIDS                    enabled
WMI_SERVICE_ARPNS_OFFLOAD                -
WMI_SERVICE_NLO                          -
WMI_SERVICE_GTK_OFFLOAD                  -
WMI_SERVICE_SCAN_SCH                     -
WMI_SERVICE_CSA_OFFLOAD                  -
WMI_SERVICE_CHATTER                      -
WMI_SERVICE_COEX_FREQAVOID               -
WMI_SERVICE_PACKET_POWER_SAVE            -
WMI_SERVICE_FORCE_FW_HANG                -
WMI_SERVICE_GPIO                         -
WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM   -
WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG    -
WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG      -
WMI_SERVICE_STA_KEEP_ALIVE               -
WMI_SERVICE_TX_ENCAP                     -
WMI_SERVICE_BURST                        -
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT     -
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT     -
WMI_SERVICE_ROAM_SCAN_OFFLOAD            -
WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC     -
WMI_SERVICE_EARLY_RX                     -
WMI_SERVICE_STA_SMPS                     -
WMI_SERVICE_FWTEST                       -
WMI_SERVICE_STA_WMMAC                    -
WMI_SERVICE_TDLS                         -
WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE      -
WMI_SERVICE_ADAPTIVE_OCS                 -
WMI_SERVICE_BA_SSN_SUPPORT               -
WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE    -
WMI_SERVICE_WLAN_HB                      -
WMI_SERVICE_LTE_ANT_SHARE_SUPPORT        -
WMI_SERVICE_BATCH_SCAN                   -
WMI_SERVICE_QPOWER                       -
WMI_SERVICE_PLMREQ                       -
WMI_SERVICE_THERMAL_MGMT                 -
WMI_SERVICE_RMC                          -
WMI_SERVICE_MHF_OFFLOAD                  -
WMI_SERVICE_COEX_SAR                     -
WMI_SERVICE_BCN_TXRATE_OVERRIDE          -
WMI_SERVICE_NAN                          -
WMI_SERVICE_L1SS_STAT                    -
WMI_SERVICE_ESTIMATE_LINKSPEED           -
WMI_SERVICE_OBSS_SCAN                    -
WMI_SERVICE_TDLS_OFFCHAN                 -
WMI_SERVICE_TDLS_UAPSD_BUFFER_STA        -
WMI_SERVICE_TDLS_UAPSD_SLEEP_STA         -
WMI_SERVICE_IBSS_PWRSAVE                 -
WMI_SERVICE_LPASS                        -
WMI_SERVICE_EXTSCAN                      -
WMI_SERVICE_D0WOW                        -
WMI_SERVICE_HSOFFLOAD                    -
WMI_SERVICE_ROAM_HO_OFFLOAD              -
WMI_SERVICE_RX_FULL_REORDER              -
WMI_SERVICE_DHCP_OFFLOAD                 -
WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT   -
WMI_SERVICE_MDNS_OFFLOAD                 -
WMI_SERVICE_SAP_AUTH_OFFLOAD             -
WMI_SERVICE_ATF                          -
WMI_SERVICE_COEX_GPIO                    -


wmi_services with firmware 10.2.4.70-2:

WMI_SERVICE_BEACON_OFFLOAD               -
WMI_SERVICE_SCAN_OFFLOAD                 enabled
WMI_SERVICE_ROAM_OFFLOAD                 enabled
WMI_SERVICE_BCN_MISS_OFFLOAD             enabled
WMI_SERVICE_STA_PWRSAVE                  enabled
WMI_SERVICE_STA_ADVANCED_PWRSAVE         enabled
WMI_SERVICE_AP_UAPSD                     enabled
WMI_SERVICE_AP_DFS                       -
WMI_SERVICE_11AC                         enabled
WMI_SERVICE_BLOCKACK                     enabled
WMI_SERVICE_PHYERR                       enabled
WMI_SERVICE_BCN_FILTER                   -
WMI_SERVICE_RTT                          enabled
WMI_SERVICE_RATECTRL                     -
WMI_SERVICE_WOW                          -
WMI_SERVICE_RATECTRL_CACHE               enabled
WMI_SERVICE_IRAM_TIDS                    enabled
WMI_SERVICE_ARPNS_OFFLOAD                -
WMI_SERVICE_NLO                          -
WMI_SERVICE_GTK_OFFLOAD                  -
WMI_SERVICE_SCAN_SCH                     -
WMI_SERVICE_CSA_OFFLOAD                  -
WMI_SERVICE_CHATTER                      -
WMI_SERVICE_COEX_FREQAVOID               -
WMI_SERVICE_PACKET_POWER_SAVE            -
WMI_SERVICE_FORCE_FW_HANG                enabled
WMI_SERVICE_GPIO                         -
WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM   -
WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG    -
WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG      -
WMI_SERVICE_STA_KEEP_ALIVE               -
WMI_SERVICE_TX_ENCAP                     -
WMI_SERVICE_BURST                        enabled
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT     enabled
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT     -
WMI_SERVICE_ROAM_SCAN_OFFLOAD            -
WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC     -
WMI_SERVICE_EARLY_RX                     -
WMI_SERVICE_STA_SMPS                     -
WMI_SERVICE_FWTEST                       -
WMI_SERVICE_STA_WMMAC                    -
WMI_SERVICE_TDLS                         -
WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE      -
WMI_SERVICE_ADAPTIVE_OCS                 -
WMI_SERVICE_BA_SSN_SUPPORT               -
WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE    -
WMI_SERVICE_WLAN_HB                      -
WMI_SERVICE_LTE_ANT_SHARE_SUPPORT        -
WMI_SERVICE_BATCH_SCAN                   -
WMI_SERVICE_QPOWER                       -
WMI_SERVICE_PLMREQ                       -
WMI_SERVICE_THERMAL_MGMT                 -
WMI_SERVICE_RMC                          -
WMI_SERVICE_MHF_OFFLOAD                  -
WMI_SERVICE_COEX_SAR                     -
WMI_SERVICE_BCN_TXRATE_OVERRIDE          -
WMI_SERVICE_NAN                          -
WMI_SERVICE_L1SS_STAT                    -
WMI_SERVICE_ESTIMATE_LINKSPEED           -
WMI_SERVICE_OBSS_SCAN                    -
WMI_SERVICE_TDLS_OFFCHAN                 -
WMI_SERVICE_TDLS_UAPSD_BUFFER_STA        -
WMI_SERVICE_TDLS_UAPSD_SLEEP_STA         -
WMI_SERVICE_IBSS_PWRSAVE                 -
WMI_SERVICE_LPASS                        -
WMI_SERVICE_EXTSCAN                      -
WMI_SERVICE_D0WOW                        -
WMI_SERVICE_HSOFFLOAD                    -
WMI_SERVICE_ROAM_HO_OFFLOAD              -
WMI_SERVICE_RX_FULL_REORDER              -
WMI_SERVICE_DHCP_OFFLOAD                 -
WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT   -
WMI_SERVICE_MDNS_OFFLOAD                 -
WMI_SERVICE_SAP_AUTH_OFFLOAD             -
WMI_SERVICE_ATF                          enabled
WMI_SERVICE_COEX_GPIO                    -

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

On Mon, Jul 20, 2015 at 2:06 PM, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>> I'd recommend using traces[1] instead as they won't suffer from this
>> problem. Kernel log buffer isn't big enough to debug everything with
>> mere prints.
I managed to get a trace earlier. The output is quite big so I am not
attaching it to this email.
You can find the result with firmware 10.2.4.70-2 here: [0]


Regards,
Martin

[0] https://dl.dropboxusercontent.com/u/26940713/tmp/ath10k-trace-fw-10.2.4.70-2.tar.xz

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 20 July 2015 at 15:36, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> On Mon, Jul 20, 2015 at 2:06 PM, Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
>>> I'd recommend using traces[1] instead as they won't suffer from this
>>> problem. Kernel log buffer isn't big enough to debug everything with
>>> mere prints.
> I managed to get a trace earlier. The output is quite big so I am not
> attaching it to this email.
> You can find the result with firmware 10.2.4.70-2 here: [0]

Thanks.

Note: It's better to post trace.dat. It contains more useful data -
`trace-cmd report` doesn't decode, e.g. hexdumps unless you have extra
plugins.

Anyway, I'm running out of ideas. You could make ath10k ignore SWBA
events (i.e. not send beacon commands) and see what happens.


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

On Wed, Jul 22, 2015 at 9:47 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> Note: It's better to post trace.dat. It contains more useful data -
> `trace-cmd report` doesn't decode, e.g. hexdumps unless you have extra
> plugins.
OK, noted. Do you still need trace.dat (I forgot to save that, but I
can obtain a new trace if required)?

> Anyway, I'm running out of ideas. You could make ath10k ignore SWBA
> events (i.e. not send beacon commands) and see what happens.
First of all: thanks for looking into this!
Can you be a bit more specific regarding ignoring SWBA events? Can I
simply make ath10k_wmi_event_host_swba a no-op?


Regards,
Martin

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 22 July 2015 at 16:53, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hi Michal,
>
> On Wed, Jul 22, 2015 at 9:47 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> Note: It's better to post trace.dat. It contains more useful data -
>> `trace-cmd report` doesn't decode, e.g. hexdumps unless you have extra
>> plugins.
> OK, noted. Do you still need trace.dat (I forgot to save that, but I
> can obtain a new trace if required)?

No need for traces now, thanks ;-) We're back to guesswork.


>> Anyway, I'm running out of ideas. You could make ath10k ignore SWBA
>> events (i.e. not send beacon commands) and see what happens.
> First of all: thanks for looking into this!
> Can you be a bit more specific regarding ignoring SWBA events? Can I
> simply make ath10k_wmi_event_host_swba a no-op?

Yes, this should be enough. You'll want to add/keep a print to know
how many SWBA event come in though. Perhaps not submitting beacons
will prevent the crash or it'll postpone it until after more SWBA
events are delivered than before.


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

sorry for the delay, I was very busy for the past week.
But now I am back with news.
To keep it simple, all of my new findings below are with ath10k
firmware 10.2.4.70-2.
The wireless drivers were also updated in OpenWrt: "Loading modules
backported from Linux version master-2015-07-21-0-g47cd203"

On Thu, Jul 23, 2015 at 7:50 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> Yes, this should be enough. You'll want to add/keep a print to know
> how many SWBA event come in though.
I have used this patch [0] to make ath10k_wmi_event_host_swba only do
printk("%s()\n", __func__);
Result: firmware is not crashing - kernel log can be seen here: [1]

> Perhaps not submitting beacons will prevent the crash or it'll postpone it until
> after more SWBA events are delivered than before.
I also tried that by #if 0'ing everything starting at "if
(!arvif->beacon_buf)" until "trace_ath10k_tx_payload(ar, bcn->data,
bcn->len);". The patch for this can be seen here: [2]
The result: firmware is still not crashing - kernel log can be seen here: [3]

Without any patches at all (only a printk at the start of
ath10k_wmi_event_host_swba), this is the result the same as with old
wireless driver versions: firmware crashes, see [5]

Let me know what the next steps are - I'm sure we can fix this nasty bug! :-)


Regards,
Martin

[0] https://paste.kde.org/p7osjjjys
[1] https://paste.kde.org/pevltyu4z
[2] https://paste.kde.org/pexn9n4ao
[3] https://paste.kde.org/pgjf9xv4w
[5] https://paste.kde.org/p2xxmpoiz

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 29 July 2015 at 02:04, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hi Michal,
>
> sorry for the delay, I was very busy for the past week.
> But now I am back with news.
> To keep it simple, all of my new findings below are with ath10k
> firmware 10.2.4.70-2.
> The wireless drivers were also updated in OpenWrt: "Loading modules
> backported from Linux version master-2015-07-21-0-g47cd203"
>
> On Thu, Jul 23, 2015 at 7:50 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> Yes, this should be enough. You'll want to add/keep a print to know
>> how many SWBA event come in though.
> I have used this patch [0] to make ath10k_wmi_event_host_swba only do
> printk("%s()\n", __func__);
> Result: firmware is not crashing - kernel log can be seen here: [1]
>
>> Perhaps not submitting beacons will prevent the crash or it'll postpone it until
>> after more SWBA events are delivered than before.
> I also tried that by #if 0'ing everything starting at "if
> (!arvif->beacon_buf)" until "trace_ath10k_tx_payload(ar, bcn->data,
> bcn->len);". The patch for this can be seen here: [2]
> The result: firmware is still not crashing - kernel log can be seen here: [3]
>
> Without any patches at all (only a printk at the start of
> ath10k_wmi_event_host_swba), this is the result the same as with old
> wireless driver versions: firmware crashes, see [5]
>
> Let me know what the next steps are - I'm sure we can fix this nasty bug! :-)

Awesome report, thanks!

It's good we narrowed the problem down to beacon transmission.

I can't get smart antenna out of my head at this point - it wasn't
supported in 10.1 firmware (which works with your device). However
10.2 seems to report that your hardware itself isn't capable of it so
it shouldn't be a problem (in theory).

I guess you could try playing with the WMI_BCN_TX_REF_DEF_ANTENNA in
the driver and try things like: 0x1, 0x7, 0xf, 0xff, 0xff00, 0xffff,
0xff0000, 0xffffff.

I doubt it'll help though. I guess other management frames would crash
firmware as well but I don't think they do. Can you verify that by
running scan from any station around to see if the ath10k AP responds
with a Probe Response and is hence visible in station's scan results,
please?


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

On Wed, Jul 29, 2015 at 9:38 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> I can't get smart antenna out of my head at this point - it wasn't
> supported in 10.1 firmware (which works with your device). However
> 10.2 seems to report that your hardware itself isn't capable of it so
> it shouldn't be a problem (in theory).
>
> I guess you could try playing with the WMI_BCN_TX_REF_DEF_ANTENNA in
> the driver and try things like: 0x1, 0x7, 0xf, 0xff, 0xff00, 0xffff,
> 0xff0000, 0xffffff.
I have tested the following values (while there were NO changes in
ath10k_wmi_event_host_swba = my patch was reverted) and it's still
crashing with all of them:
0x1, 0x3, 0x7, 0xf, 0xff, 0xff00, 0xffff, 0xff0000 and 0xffffff

> I doubt it'll help though. I guess other management frames would crash
> firmware as well but I don't think they do. Can you verify that by
> running scan from any station around to see if the ath10k AP responds
> with a Probe Response and is hence visible in station's scan results,
> please?
I did that with my second patch applied (that skips sending beacons)
and WMI_BCN_TX_REF_DEF_ANTENNA = 0. In this case the AP is *not*
visible to other devices (I checked with two android phones, since
those are the only other 5G ready devices I have at the moment).


Regards,
Martin

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 29 July 2015 at 11:18, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> On Wed, Jul 29, 2015 at 9:38 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> I can't get smart antenna out of my head at this point - it wasn't
>> supported in 10.1 firmware (which works with your device). However
>> 10.2 seems to report that your hardware itself isn't capable of it so
>> it shouldn't be a problem (in theory).
>>
>> I guess you could try playing with the WMI_BCN_TX_REF_DEF_ANTENNA in
>> the driver and try things like: 0x1, 0x7, 0xf, 0xff, 0xff00, 0xffff,
>> 0xff0000, 0xffffff.
> I have tested the following values (while there were NO changes in
> ath10k_wmi_event_host_swba = my patch was reverted) and it's still
> crashing with all of them:
> 0x1, 0x3, 0x7, 0xf, 0xff, 0xff00, 0xffff, 0xff0000 and 0xffffff

Thanks for testing.


>> I doubt it'll help though. I guess other management frames would crash
>> firmware as well but I don't think they do. Can you verify that by
>> running scan from any station around to see if the ath10k AP responds
>> with a Probe Response and is hence visible in station's scan results,
>> please?
> I did that with my second patch applied (that skips sending beacons)
> and WMI_BCN_TX_REF_DEF_ANTENNA = 0. In this case the AP is *not*
> visible to other devices (I checked with two android phones, since
> those are the only other 5G ready devices I have at the moment).

It could be that your devices are not transmitting Probe Requests and
scan passively 5GHz channels due to their regulatory restrictions. Can
you try getting traces to confirm this, please?


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

On Tue, Aug 4, 2015 at 7:19 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> It could be that your devices are not transmitting Probe Requests and
> scan passively 5GHz channels due to their regulatory restrictions. Can
> you try getting traces to confirm this, please?
I have just tried it again and today I *can* see the AP on one of my
Android devices (I haven't tried the second one, but that should also
see it).

During my testing I found out that ath10k_wmi_beacon_send_ref_nowait()
is the command that makes it crash.
I re-enabled everything in ath10k_wmi_event_host_swba() and it started
crashing again.
A few tests later I found that removing the following line "fixes" the
crashes (but it will obviously break other things!):
    arvif->beacon_state = ATH10K_BEACON_SCHEDULED;

Thus I came to the conclusion that I should try disabling
"pdev_send_bcn_cmdid" to the device.

I made two traces (with firmware 10.2.4.70-2), you can find them both
in this tarball: [0]
trace.192.168.1.3:41579.dat was recorded without any ath10k patches
trace.192.168.1.3:43752.dat was recorded with
ath10k_wmi_beacon_send_ref_nowait that has ath10k_wmi_cmd_send_nowait
removed (see [1])


Regards,
Martin


[0] https://dl.dropboxusercontent.com/u/26940713/tmp/ath10k-trace-with-and-without-pdev_send_bcn_cmdid.tar.xz
[1] https://paste.kde.org/pxshmoesw

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 8 August 2015 at 23:06, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Hi Michal,

Hi,

Sorry for my late reply.


> On Tue, Aug 4, 2015 at 7:19 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
>> It could be that your devices are not transmitting Probe Requests and
>> scan passively 5GHz channels due to their regulatory restrictions. Can
>> you try getting traces to confirm this, please?
> I have just tried it again and today I *can* see the AP on one of my
> Android devices (I haven't tried the second one, but that should also
> see it).
>
> During my testing I found out that ath10k_wmi_beacon_send_ref_nowait()
> is the command that makes it crash.
> I re-enabled everything in ath10k_wmi_event_host_swba() and it started
> crashing again.
> A few tests later I found that removing the following line "fixes" the
> crashes (but it will obviously break other things!):
>     arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
>
> Thus I came to the conclusion that I should try disabling
> "pdev_send_bcn_cmdid" to the device.

Hardly a solution, obviously.


>
> I made two traces (with firmware 10.2.4.70-2), you can find them both
> in this tarball: [0]
> trace.192.168.1.3:41579.dat was recorded without any ath10k patches
> trace.192.168.1.3:43752.dat was recorded with
> ath10k_wmi_beacon_send_ref_nowait that has ath10k_wmi_cmd_send_nowait
> removed (see [1])

I'm out of ideas for now. Apparently the device can Tx as it can send
out Probe Responses but for some reason it doesn't like beaconing..


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

Hi Michal,

first of all I'd like to say thank you (for helping to solve this issue) :-)

On Mon, Aug 17, 2015 at 7:46 AM, Michal Kazior <michal.kazior@tieto.com> wrote:
> I'm out of ideas for now. Apparently the device can Tx as it can send
> out Probe Responses but for some reason it doesn't like beaconing..
Is there anything else we can do? Or do we have to wait for someone
with deeper insight into the firmware (aka a QCA employee)?


Regards,
Martin

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Martin Blumenstingl]

On Sat, Aug 22, 2015 at 8:38 PM, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> Is there anything else we can do? Or do we have to wait for someone
> with deeper insight into the firmware (aka a QCA employee)?
I have seen that Felix posted a patch this week: [0] ("ath10k: fix DMA
related firmware crashes on multiple devices").
For what I can say so far this fixes the crashes and firmware
10.2.4.70-2 is now running fine for 10 minutes.

So thanks to everyone who helped investigating and fixing this!


Regards,
Martin


[0] http://lists.infradead.org/pipermail/ath10k/2015-September/006024.html

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

RE: AP mode firmware crash on QCA9880-BR4A

[Mercer, Karl]

> Hmm.. The crash coincides with dtim beacon submission. Can you change dtim period to 1 and 10 (2 tests) and see how many SWBA events it takes before it crashes respectively, please?

The crash still occurs after the 2nd SWBA event for both dtim_period=1 and dtim_period=10.  Here are the logs:

Log for dtim_period=1:
[  179.410000] br-lan: port 3(wlan0) entered forwarding state
[  179.460000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  179.460000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 810dd740
[  179.460000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  179.460000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ded2c0
[  179.460000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  179.460000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 810dd740
[  179.460000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.460000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  179.460000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ded2c0
[  179.540000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 81191a80
[  179.540000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  179.540000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  179.540000] ath10k_pci 0000:04:00.0: dtim 0/1 mcast 0 pvmlen 1
[  179.540000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.540000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  179.540000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 810dd440
[  179.570000] ath10k_pci 0000:04:00.0: mac monitor recalc started? 0 needed? 0 allowed? 1
[  179.640000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 811919c0
[  179.640000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  179.640000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  179.640000] ath10k_pci 0000:04:00.0: dtim 0/1 mcast 0 pvmlen 1
[  179.640000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  179.710000] ath10k_pci 0000:04:00.0: firmware crashed! (uuid bf96f9b3-caa6-4090-84db-4c9cee275fca)
[  179.760000] ath10k_pci 0000:04:00.0: qca988x hw2.0 (0x4100016c, 0x043222ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
[  179.830000] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1
[  179.890000] ath10k_pci 0000:04:00.0: failed to read diag value at 0x1c100804: -16
[  179.920000] ath10k_pci 0000:04:00.0: failed to get memcpy hi address for firmware address 4: -16
[  179.970000] ath10k_pci 0000:04:00.0: failed to read firmware dump area: -16
[  180.020000] ath10k_pci 0000:04:00.0: boot hif stop

Log for dtim_period=10:
[  344.070000] br-lan: port 3(wlan0) entered forwarding state
[  344.120000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  344.120000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 81fee320
[  344.120000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  344.120000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 81fee260
[  344.120000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  344.120000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 81fee320
[  344.120000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.120000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  344.120000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 81fee260
[  344.230000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810dfa60
[  344.230000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  344.230000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  344.230000] ath10k_pci 0000:04:00.0: dtim 9/10 mcast 0 pvmlen 1
[  344.230000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.230000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  344.230000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 810897a0
[  344.290000] ath10k_pci 0000:04:00.0: mac monitor recalc started? 0 needed? 0 allowed? 1
[  344.330000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810df9a0
[  344.330000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  344.330000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  344.330000] ath10k_pci 0000:04:00.0: dtim 8/10 mcast 0 pvmlen 1
[  344.330000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  344.410000] ath10k_pci 0000:04:00.0: firmware crashed! (uuid 7d2379f1-54ea-4419-84a7-909a1f592158)
[  344.460000] ath10k_pci 0000:04:00.0: qca988x hw2.0 (0x4100016c, 0x043222ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
[  344.530000] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1
[  344.580000] ath10k_pci 0000:04:00.0: failed to read diag value at 0x1c100804: -16
[  344.620000] ath10k_pci 0000:04:00.0: failed to get memcpy hi address for firmware address 4: -16
[  344.670000] ath10k_pci 0000:04:00.0: failed to read firmware dump area: -16
[  344.710000] ath10k_pci 0000:04:00.0: boot hif stop

I also tried changing the beacon interval from 100ms to 500ms.  You can see that the crash is still after the 2nd SWBA event, but the spacing of SWBA events is now 500ms:
[  226.290000] br-lan: port 3(wlan0) entered forwarding state
[  226.370000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  226.370000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80e29d80
[  226.370000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  226.370000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 811a0780
[  226.370000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  226.370000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80e29d80
[  226.370000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  226.370000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  226.370000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 811a0780
[  226.510000] ath10k_pci 0000:04:00.0: mac monitor recalc started? 0 needed? 0 allowed? 1
[  227.020000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810eea40
[  227.020000] ath10k_pci 0000:04:00.0: wmi event debug mesg len 212
[  227.560000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810ee980
[  227.560000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  227.560000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  227.560000] ath10k_pci 0000:04:00.0: dtim 1/2 mcast 0 pvmlen 1
[  227.560000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  227.560000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  227.560000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 811a0780
[  228.020000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810ee8c0
[  228.020000] ath10k_pci 0000:04:00.0: wmi event debug mesg len 48
[  228.070000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 810ee800
[  228.070000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  228.070000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  228.070000] ath10k_pci 0000:04:00.0: dtim 0/2 mcast 0 pvmlen 1
[  228.070000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  228.150000] ath10k_pci 0000:04:00.0: firmware crashed! (uuid 9bf5b96c-bc00-4ef3-8f4d-b463293077e3)
[  228.190000] ath10k_pci 0000:04:00.0: qca988x hw2.0 (0x4100016c, 0x043222ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
[  228.260000] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1
[  228.320000] ath10k_pci 0000:04:00.0: failed to read diag value at 0x1c100804: -16
[  228.350000] ath10k_pci 0000:04:00.0: failed to get memcpy hi address for firmware address 4: -16
[  228.410000] ath10k_pci 0000:04:00.0: failed to read firmware dump area: -16
[  228.450000] ath10k_pci 0000:04:00.0: boot hif stop



________________________________
- CONFIDENTIAL-

This email and any files transmitted with it are confidential, and may also be legally privileged. If you are not the intended recipient, you may not review, use, copy, or distribute this message. If you receive this email in error, please notify the sender immediately by reply email and then delete this email.
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Michal Kazior]

On 17 July 2015 at 00:11, Mercer, Karl <karlmercer@zebra.com> wrote:
> Hi Michal et al,
>
> I am seeing the exact same problem as Martin reported.  I am using ath10k code from openwrt rev 46287 to drive a QCA9882 in AP mode.
> QCA988X firmware version 10.2.4.70-2 crashes, however swapping out this for version 10.1.467.2-1 "fixes" the crash.
> I set the debug_mask to 16182, which gives slightly more verbose debugging.  Unfortunately, I haven't managed to turn on tracing as it causes an unrelated kernel Oops.
> You will see from the following log, there are 2 swba events which result in 2 beacons being sent out (using ath10k_wmi_beacon_send_ref_nowait).  It is after the 2nd beacon is sent that the firmware crashes - this is 100% reproducible.
[...]

Hmm.. The crash coincides with dtim beacon submission. Can you change
dtim period to 1 and 10 (2 tests) and see how many SWBA events it
takes before it crashes respectively, please?


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: AP mode firmware crash on QCA9880-BR4A

[Mercer, Karl]

Hi Michal et al,

I am seeing the exact same problem as Martin reported.  I am using ath10k code from openwrt rev 46287 to drive a QCA9882 in AP mode.
QCA988X firmware version 10.2.4.70-2 crashes, however swapping out this for version 10.1.467.2-1 "fixes" the crash.
I set the debug_mask to 16182, which gives slightly more verbose debugging.  Unfortunately, I haven't managed to turn on tracing as it causes an unrelated kernel Oops.
You will see from the following log, there are 2 swba events which result in 2 beacons being sent out (using ath10k_wmi_beacon_send_ref_nowait).  It is after the 2nd beacon is sent that the firmware crashes - this is 100% reproducible.
I'm not sure if either beacon appears in the air, but will investigate this.
I saw your suggestion about re-implementing the old by-copy beaconing - I'll try and figure out how to do this.  Please let me know if there's any other information I can give you.

This is the log for fw version 10.2.4.70-2 - I've cut it down to a minimum to show the essential bits:
lspci
...
04:00.0 Network controller: Qualcomm Atheros QCA988x 802.11ac Wireless Network Adapter
...
root@(none):/etc/config# cat /sys/module/ath10k_core/parameters/debug_mask
16182
...
root@(none):/etc/config# dmesg -c
...
[   24.100000] ath10k_pci 0000:04:00.0: bmi get target info
[   24.100000] ath10k_pci 0000:04:00.0: Hardware name qca988x hw2.0 version 0x4100016c
[   24.130000] ath10k_pci 0000:04:00.0: trying fw api 5
[   24.130000] ath10k_pci 0000:04:00.0: found fw version 10.2.4.70-2
[   24.130000] ath10k_pci 0000:04:00.0: found fw timestamp 1433440353
[   24.130000] ath10k_pci 0000:04:00.0: found otp image ie (7205 B)
[   24.130000] ath10k_pci 0000:04:00.0: found fw image ie (237784 B)
[   24.130000] ath10k_pci 0000:04:00.0: found firmware features ie (1 B)
[   24.130000] ath10k_pci 0000:04:00.0: Enabling feature bit: 3
[   24.130000] ath10k_pci 0000:04:00.0: features
[   24.130000] ath10k_pci 0000:04:00.0: 00000000: 00 00 00 08                                      ....
[   24.130000] ath10k_pci 0000:04:00.0: found fw ie wmi op version 5
[   24.130000] ath10k_pci 0000:04:00.0: found fw ie htt op version 2
[   24.130000] ath10k_pci 0000:04:00.0: using fw api 5
...
root@(none):/etc/config# wifi up
...
root@(none):/etc/config# dmesg -c
...
[  502.970000] br-lan: port 3(wlan0) entered forwarding state
[  503.000000] br-lan: port 3(wlan0) entered forwarding state
[  503.060000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  503.060000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ccbcc0
[  503.060000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  503.060000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ccbc00
[  503.060000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  503.060000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ccbcc0
[  503.060000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.060000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  503.060000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ccbc00
[  503.190000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 80c45c80
[  503.190000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  503.190000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  503.190000] ath10k_pci 0000:04:00.0: dtim 1/2 mcast 0 pvmlen 1
[  503.190000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.190000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  503.190000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80ccb480
[  503.190000] ath10k_pci 0000:04:00.0: mac monitor recalc started? 0 needed? 0 allowed? 1
[  503.290000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 80c45bc0
[  503.290000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  503.290000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  503.290000] ath10k_pci 0000:04:00.0: dtim 0/2 mcast 0 pvmlen 1
[  503.290000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  503.360000] ath10k_pci 0000:04:00.0: firmware crashed! (uuid 93afcd06-9fbd-4d9a-80c0-de810c0e26c5)
[  503.410000] ath10k_pci 0000:04:00.0: qca988x hw2.0 (0x4100016c, 0x043222ff) fw 10.2.4.70-2 api 5 htt 2.1 wmi 5 cal otp max_sta 128
[  503.480000] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1
[  503.540000] ath10k_pci 0000:04:00.0: failed to read diag value at 0x1c100804: -16
[  503.570000] ath10k_pci 0000:04:00.0: failed to get memcpy hi address for firmware address 4: -16
[  503.620000] ath10k_pci 0000:04:00.0: failed to read firmware dump area: -16
[  503.690000] ath10k_pci 0000:04:00.0: boot hif stop
[  503.690000] ath10k_pci 0000:04:00.0: boot warm reset
...

And here is the log for fw version 10.1.467.2-1 - there are multiple swba events:
root@(none):/# dmesg -c
...
[   24.110000] ath10k_pci 0000:04:00.0: bmi get target info
[   24.110000] ath10k_pci 0000:04:00.0: Hardware name qca988x hw2.0 version 0x4100016c
[   24.140000] ath10k_pci 0000:04:00.0: trying fw api 5
[   24.170000] ath10k_pci 0000:04:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-5.bin': -2
[   24.220000] ath10k_pci 0000:04:00.0: trying fw api 4
[   24.250000] ath10k_pci 0000:04:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-4.bin': -2
[   24.300000] ath10k_pci 0000:04:00.0: trying fw api 3
[   24.350000] ath10k_pci 0000:04:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-3.bin': -2
[   24.400000] ath10k_pci 0000:04:00.0: trying fw api 2
[   24.440000] ath10k_pci 0000:04:00.0: found fw version 10.1.467.2-1
[   24.440000] ath10k_pci 0000:04:00.0: found fw timestamp 1391440175
[   24.440000] ath10k_pci 0000:04:00.0: found otp image ie (6917 B)
[   24.440000] ath10k_pci 0000:04:00.0: found fw image ie (190250 B)
[   24.440000] ath10k_pci 0000:04:00.0: found firmware features ie (1 B)
[   24.440000] ath10k_pci 0000:04:00.0: Enabling feature bit: 1
[   24.440000] ath10k_pci 0000:04:00.0: Enabling feature bit: 2
[   24.440000] ath10k_pci 0000:04:00.0: features
[   24.440000] ath10k_pci 0000:04:00.0: 00000000: 00 00 00 06                                      ....
[   24.440000] ath10k_pci 0000:04:00.0: using fw api 2
...
root@(none):/# wifi up
...
root@(none):/# dmesg -c
...
[  288.540000] br-lan: port 3(wlan0) entered forwarding state
[  288.580000] br-lan: port 3(wlan0) entered forwarding state
[  288.740000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.740000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2bc0
[  288.740000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.740000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2800
[  288.740000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.740000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2bc0
[  288.740000] ath10k_pci 0000:04:00.0: wmi pdev set wmm params
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.740000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.740000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2800
[  288.770000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 813f0e40
[  288.770000] ath10k_pci 0000:04:00.0: testmode event wmi cmd_id 36874 skb 813f0e40 skb->len 36
[  288.770000] ath10k_pci 0000:04:00.0: 00000000: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.770000] ath10k_pci 0000:04:00.0: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.770000] ath10k_pci 0000:04:00.0: 00000020: 00 00 00 00                                      ....
[  288.770000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  288.770000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  288.770000] ath10k_pci 0000:04:00.0: dtim 1/2 mcast 0 pvmlen 1
[  288.770000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.780000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.780000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2c80
[  288.870000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 813f0d80
[  288.870000] ath10k_pci 0000:04:00.0: testmode event wmi cmd_id 36874 skb 813f0d80 skb->len 36
[  288.870000] ath10k_pci 0000:04:00.0: 00000000: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.870000] ath10k_pci 0000:04:00.0: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.870000] ath10k_pci 0000:04:00.0: 00000020: 00 00 00 00                                      ....
[  288.870000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  288.870000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  288.870000] ath10k_pci 0000:04:00.0: dtim 0/2 mcast 0 pvmlen 1
[  288.870000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.870000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.870000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd2800
[  288.890000] ath10k_pci 0000:04:00.0: mac monitor recalc started? 0 needed? 0 allowed? 1
[  288.970000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 813f0cc0
[  288.970000] ath10k_pci 0000:04:00.0: testmode event wmi cmd_id 36874 skb 813f0cc0 skb->len 36
[  288.970000] ath10k_pci 0000:04:00.0: 00000000: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.970000] ath10k_pci 0000:04:00.0: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  288.970000] ath10k_pci 0000:04:00.0: 00000020: 00 00 00 00                                      ....
[  288.970000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  288.970000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  288.970000] ath10k_pci 0000:04:00.0: dtim 1/2 mcast 0 pvmlen 1
[  288.970000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  288.970000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  288.970000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 80cd25c0
[  289.070000] ath10k_pci 0000:04:00.0: htc rx completion ep 2 skb 813f0c00
[  289.070000] ath10k_pci 0000:04:00.0: testmode event wmi cmd_id 36874 skb 813f0c00 skb->len 36
[  289.070000] ath10k_pci 0000:04:00.0: 00000000: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  289.070000] ath10k_pci 0000:04:00.0: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  289.070000] ath10k_pci 0000:04:00.0: 00000020: 00 00 00 00                                      ....
[  289.070000] ath10k_pci 0000:04:00.0: mgmt swba vdev_map 0x1
[  289.070000] ath10k_pci 0000:04:00.0: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitmap 0x00000000000000000000000000000000
[  289.070000] ath10k_pci 0000:04:00.0: dtim 0/2 mcast 0 pvmlen 1
[  289.070000] ath10k_pci 0000:04:00.0: htc ep 2 consumed 1 credits (total 1)
[  289.070000] ath10k_pci 0000:04:00.0: htc ep 2 got 1 credits (total 2)
[  289.070000] ath10k_pci 0000:04:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 85826d40
...

Regards,
Karl


________________________________
- CONFIDENTIAL-

This email and any files transmitted with it are confidential, and may also be legally privileged. If you are not the intended recipient, you may not review, use, copy, or distribute this message. If you receive this email in error, please notify the sender immediately by reply email and then delete this email.

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k