* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-06 17:36 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-06 17:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
kishon-l0cyMroinI0, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Martin Blumenstingl
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the documentation
(devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/Kconfig | 4 ++--
drivers/phy/phy-meson8b-usb2.c | 5 +++--
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 005cadb7a3f8..0d3e5099ff6a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -507,8 +507,8 @@ config PHY_MESON8B_USB2
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
endmenu
diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c
index d75004e69b65..a8012bb1d1c5 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
*
@@ -285,6 +285,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -301,5 +302,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-06 17:36 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-06 17:36 UTC (permalink / raw)
To: linus-amlogic
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the documentation
(devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/Kconfig | 4 ++--
drivers/phy/phy-meson8b-usb2.c | 5 +++--
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 005cadb7a3f8..0d3e5099ff6a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -507,8 +507,8 @@ config PHY_MESON8B_USB2
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
endmenu
diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c
index d75004e69b65..a8012bb1d1c5 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
@@ -285,6 +285,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -301,5 +302,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.12.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-06 17:36 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-06 17:36 UTC (permalink / raw)
To: linux-arm-kernel
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the documentation
(devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/Kconfig | 4 ++--
drivers/phy/phy-meson8b-usb2.c | 5 +++--
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 005cadb7a3f8..0d3e5099ff6a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -507,8 +507,8 @@ config PHY_MESON8B_USB2
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
endmenu
diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c
index d75004e69b65..a8012bb1d1c5 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
@@ -285,6 +285,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -301,5 +302,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.12.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
2017-05-06 17:36 ` Martin Blumenstingl
(?)
@ 2017-05-08 12:10 ` Kishon Vijay Abraham I
-1 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-05-08 12:10 UTC (permalink / raw)
To: Martin Blumenstingl, robh+dt, mark.rutland, devicetree, linux-amlogic
Cc: carlo, khilman, johnyoun, linux-arm-kernel
Hi,
On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
> a new of_device_id to indicate this. Also update the documentation
> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/Kconfig | 4 ++--
> drivers/phy/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> index 5fa73b9d20f5..d81d73aea608 100644
> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> @@ -1,7 +1,8 @@
> -* Amlogic Meson8b and GXBB USB2 PHY
> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>
> Required properties:
> - compatible: Depending on the platform this should be one of:
> + "amlogic,meson8-usb2-phy"
> "amlogic,meson8b-usb2-phy"
> "amlogic,meson-gxbb-usb2-phy"
Please split the dt binding documentation into a separate patch.
Thanks
Kishon
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-08 12:10 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-05-08 12:10 UTC (permalink / raw)
To: linus-amlogic
Hi,
On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
> a new of_device_id to indicate this. Also update the documentation
> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/Kconfig | 4 ++--
> drivers/phy/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> index 5fa73b9d20f5..d81d73aea608 100644
> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> @@ -1,7 +1,8 @@
> -* Amlogic Meson8b and GXBB USB2 PHY
> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>
> Required properties:
> - compatible: Depending on the platform this should be one of:
> + "amlogic,meson8-usb2-phy"
> "amlogic,meson8b-usb2-phy"
> "amlogic,meson-gxbb-usb2-phy"
Please split the dt binding documentation into a separate patch.
Thanks
Kishon
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-08 12:10 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-05-08 12:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
> a new of_device_id to indicate this. Also update the documentation
> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/Kconfig | 4 ++--
> drivers/phy/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> index 5fa73b9d20f5..d81d73aea608 100644
> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
> @@ -1,7 +1,8 @@
> -* Amlogic Meson8b and GXBB USB2 PHY
> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>
> Required properties:
> - compatible: Depending on the platform this should be one of:
> + "amlogic,meson8-usb2-phy"
> "amlogic,meson8b-usb2-phy"
> "amlogic,meson-gxbb-usb2-phy"
Please split the dt binding documentation into a separate patch.
Thanks
Kishon
^ permalink raw reply [flat|nested] 27+ messages in thread
[parent not found: <950abc53-df2d-93dd-68d1-e9868445bb93-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
2017-05-08 12:10 ` Kishon Vijay Abraham I
(?)
@ 2017-05-08 20:02 ` Martin Blumenstingl
-1 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-08 20:02 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Mon, May 8, 2017 at 2:10 PM, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> wrote:
> Hi,
>
> On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
>> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
>> a new of_device_id to indicate this. Also update the documentation
>> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
>> ---
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/Kconfig | 4 ++--
>> drivers/phy/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> index 5fa73b9d20f5..d81d73aea608 100644
>> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> @@ -1,7 +1,8 @@
>> -* Amlogic Meson8b and GXBB USB2 PHY
>> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>>
>> Required properties:
>> - compatible: Depending on the platform this should be one of:
>> + "amlogic,meson8-usb2-phy"
>> "amlogic,meson8b-usb2-phy"
>> "amlogic,meson-gxbb-usb2-phy"
>
> Please split the dt binding documentation into a separate patch.
OK, however I guess I'll wait for a few days until that restructuring
patch is merged
thanks for reviewing this so quick!
Regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-08 20:02 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-08 20:02 UTC (permalink / raw)
To: linus-amlogic
On Mon, May 8, 2017 at 2:10 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
> Hi,
>
> On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
>> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
>> a new of_device_id to indicate this. Also update the documentation
>> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> ---
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/Kconfig | 4 ++--
>> drivers/phy/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> index 5fa73b9d20f5..d81d73aea608 100644
>> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> @@ -1,7 +1,8 @@
>> -* Amlogic Meson8b and GXBB USB2 PHY
>> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>>
>> Required properties:
>> - compatible: Depending on the platform this should be one of:
>> + "amlogic,meson8-usb2-phy"
>> "amlogic,meson8b-usb2-phy"
>> "amlogic,meson-gxbb-usb2-phy"
>
> Please split the dt binding documentation into a separate patch.
OK, however I guess I'll wait for a few days until that restructuring
patch is merged
thanks for reviewing this so quick!
Regards,
Martin
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-08 20:02 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-08 20:02 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 8, 2017 at 2:10 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
> Hi,
>
> On Saturday 06 May 2017 11:06 PM, Martin Blumenstingl wrote:
>> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
>> a new of_device_id to indicate this. Also update the documentation
>> (devicetree binding, Kconfig and MODULE_DESCRIPTION) accordingly.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> ---
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/Kconfig | 4 ++--
>> drivers/phy/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> index 5fa73b9d20f5..d81d73aea608 100644
>> --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
>> @@ -1,7 +1,8 @@
>> -* Amlogic Meson8b and GXBB USB2 PHY
>> +* Amlogic Meson8, Meson8b and GXBB USB2 PHY
>>
>> Required properties:
>> - compatible: Depending on the platform this should be one of:
>> + "amlogic,meson8-usb2-phy"
>> "amlogic,meson8b-usb2-phy"
>> "amlogic,meson-gxbb-usb2-phy"
>
> Please split the dt binding documentation into a separate patch.
OK, however I guess I'll wait for a few days until that restructuring
patch is merged
thanks for reviewing this so quick!
Regards,
Martin
^ permalink raw reply [flat|nested] 27+ messages in thread
[parent not found: <20170506173625.19501-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>]
* [PATCH v2 0/2] Meson8 USB PHY support
2017-05-06 17:36 ` Martin Blumenstingl
(?)
@ 2017-05-20 14:12 ` Martin Blumenstingl
-1 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
kishon-l0cyMroinI0, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Martin Blumenstingl
The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
and GXBB SoCs.
This series adds a new compatible string for Meson8 and adjusts the
Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
accordingly.
With some additional work the same driver could be used to add USB2
support to Meson6 SoCs as well. However, due to lack of a clock
controller driver for Meson6 and the lack of a board Meson6 support
is not part of this series (Meson6 uses internal mux and divider clocks
which are provided by the USB2 PHY registers, while the newer SoCs seem
to use an alternative clock called "clk_32k_altsel")
Changes since v1:
- split the dt-bindings and the driver changes into separate patches
- rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
(from [0]) which means that this also applies on top of "phy: Group
vendor specific phy drivers"
- also update the Kconfig option name (instead of just the description)
[0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
Martin Blumenstingl (2):
phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
3 files changed, 8 insertions(+), 6 deletions(-)
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linus-amlogic
The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
and GXBB SoCs.
This series adds a new compatible string for Meson8 and adjusts the
Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
accordingly.
With some additional work the same driver could be used to add USB2
support to Meson6 SoCs as well. However, due to lack of a clock
controller driver for Meson6 and the lack of a board Meson6 support
is not part of this series (Meson6 uses internal mux and divider clocks
which are provided by the USB2 PHY registers, while the newer SoCs seem
to use an alternative clock called "clk_32k_altsel")
Changes since v1:
- split the dt-bindings and the driver changes into separate patches
- rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
(from [0]) which means that this also applies on top of "phy: Group
vendor specific phy drivers"
- also update the Kconfig option name (instead of just the description)
[0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
Martin Blumenstingl (2):
phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
3 files changed, 8 insertions(+), 6 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linux-arm-kernel
The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
and GXBB SoCs.
This series adds a new compatible string for Meson8 and adjusts the
Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
accordingly.
With some additional work the same driver could be used to add USB2
support to Meson6 SoCs as well. However, due to lack of a clock
controller driver for Meson6 and the lack of a board Meson6 support
is not part of this series (Meson6 uses internal mux and divider clocks
which are provided by the USB2 PHY registers, while the newer SoCs seem
to use an alternative clock called "clk_32k_altsel")
Changes since v1:
- split the dt-bindings and the driver changes into separate patches
- rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
(from [0]) which means that this also applies on top of "phy: Group
vendor specific phy drivers"
- also update the Kconfig option name (instead of just the description)
[0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
Martin Blumenstingl (2):
phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
3 files changed, 8 insertions(+), 6 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 27+ messages in thread
[parent not found: <20170520141250.27388-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>]
* [PATCH v2 1/2] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
2017-05-20 14:12 ` Martin Blumenstingl
(?)
@ 2017-05-20 14:12 ` Martin Blumenstingl
-1 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
kishon-l0cyMroinI0, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Martin Blumenstingl
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the Kconfig option and
MODULE_DESCRIPTION accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 2044211c5b86..cb8f4501652b 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -2,15 +2,15 @@
# Phy drivers for Amlogic platforms
#
config PHY_MESON8B_USB2
- tristate "Meson8b and GXBB USB2 PHY driver"
+ tristate "Meson8, Meson8b and GXBB USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
config PHY_MESON_GXL_USB2
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 30f56a6a411f..9c01b7e19b06 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
*
@@ -266,6 +266,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -282,5 +283,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 1/2] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linus-amlogic
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the Kconfig option and
MODULE_DESCRIPTION accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 2044211c5b86..cb8f4501652b 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -2,15 +2,15 @@
# Phy drivers for Amlogic platforms
#
config PHY_MESON8B_USB2
- tristate "Meson8b and GXBB USB2 PHY driver"
+ tristate "Meson8, Meson8b and GXBB USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
config PHY_MESON_GXL_USB2
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 30f56a6a411f..9c01b7e19b06 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
@@ -266,6 +266,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -282,5 +283,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.13.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 1/2] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the Kconfig option and
MODULE_DESCRIPTION accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/phy/amlogic/Kconfig | 6 +++---
drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 2044211c5b86..cb8f4501652b 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -2,15 +2,15 @@
# Phy drivers for Amlogic platforms
#
config PHY_MESON8B_USB2
- tristate "Meson8b and GXBB USB2 PHY driver"
+ tristate "Meson8, Meson8b and GXBB USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
If unsure, say N.
config PHY_MESON_GXL_USB2
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 30f56a6a411f..9c01b7e19b06 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
@@ -266,6 +266,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -282,5 +283,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
--
2.13.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
2017-05-20 14:12 ` Martin Blumenstingl
(?)
@ 2017-05-20 14:12 ` Martin Blumenstingl
-1 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
kishon-l0cyMroinI0, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Martin Blumenstingl
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
adds a new compatible string to indicate that this binding also supports
the Meson8 SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linus-amlogic
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
adds a new compatible string to indicate that this binding also supports
the Meson8 SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
--
2.13.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
@ 2017-05-20 14:12 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-05-20 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
adds a new compatible string to indicate that this binding also supports
the Meson8 SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9d20f5..d81d73aea608 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
--
2.13.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
[parent not found: <20170520141250.27388-3-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
2017-05-20 14:12 ` Martin Blumenstingl
(?)
@ 2017-05-30 22:51 ` Rob Herring
-1 siblings, 0 replies; 27+ messages in thread
From: Rob Herring @ 2017-05-30 22:51 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: mark.rutland-5wv7dgnIgG8, kishon-l0cyMroinI0,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Sat, May 20, 2017 at 04:12:50PM +0200, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
> adds a new compatible string to indicate that this binding also supports
> the Meson8 SoCs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
@ 2017-05-30 22:51 ` Rob Herring
0 siblings, 0 replies; 27+ messages in thread
From: Rob Herring @ 2017-05-30 22:51 UTC (permalink / raw)
To: linus-amlogic
On Sat, May 20, 2017 at 04:12:50PM +0200, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
> adds a new compatible string to indicate that this binding also supports
> the Meson8 SoCs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
@ 2017-05-30 22:51 ` Rob Herring
0 siblings, 0 replies; 27+ messages in thread
From: Rob Herring @ 2017-05-30 22:51 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, May 20, 2017 at 04:12:50PM +0200, Martin Blumenstingl wrote:
> Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. This
> adds a new compatible string to indicate that this binding also supports
> the Meson8 SoCs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 0/2] Meson8 USB PHY support
2017-05-20 14:12 ` Martin Blumenstingl
(?)
@ 2017-06-01 13:12 ` Kishon Vijay Abraham I
-1 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-06-01 13:12 UTC (permalink / raw)
To: Martin Blumenstingl, robh+dt, mark.rutland, devicetree, linux-amlogic
Cc: carlo, khilman, johnyoun, linux-arm-kernel
On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
> and GXBB SoCs.
> This series adds a new compatible string for Meson8 and adjusts the
> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
> accordingly.
>
> With some additional work the same driver could be used to add USB2
> support to Meson6 SoCs as well. However, due to lack of a clock
> controller driver for Meson6 and the lack of a board Meson6 support
> is not part of this series (Meson6 uses internal mux and divider clocks
> which are provided by the USB2 PHY registers, while the newer SoCs seem
> to use an alternative clock called "clk_32k_altsel")
merged, thanks.
-Kishon
>
>
> Changes since v1:
> - split the dt-bindings and the driver changes into separate patches
> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
> (from [0]) which means that this also applies on top of "phy: Group
> vendor specific phy drivers"
> - also update the Kconfig option name (instead of just the description)
>
>
> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>
>
> Martin Blumenstingl (2):
> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/amlogic/Kconfig | 6 +++---
> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 8 insertions(+), 6 deletions(-)
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-06-01 13:12 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-06-01 13:12 UTC (permalink / raw)
To: linus-amlogic
On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
> and GXBB SoCs.
> This series adds a new compatible string for Meson8 and adjusts the
> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
> accordingly.
>
> With some additional work the same driver could be used to add USB2
> support to Meson6 SoCs as well. However, due to lack of a clock
> controller driver for Meson6 and the lack of a board Meson6 support
> is not part of this series (Meson6 uses internal mux and divider clocks
> which are provided by the USB2 PHY registers, while the newer SoCs seem
> to use an alternative clock called "clk_32k_altsel")
merged, thanks.
-Kishon
>
>
> Changes since v1:
> - split the dt-bindings and the driver changes into separate patches
> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
> (from [0]) which means that this also applies on top of "phy: Group
> vendor specific phy drivers"
> - also update the Kconfig option name (instead of just the description)
>
>
> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>
>
> Martin Blumenstingl (2):
> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/amlogic/Kconfig | 6 +++---
> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 8 insertions(+), 6 deletions(-)
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-06-01 13:12 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 27+ messages in thread
From: Kishon Vijay Abraham I @ 2017-06-01 13:12 UTC (permalink / raw)
To: linux-arm-kernel
On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
> and GXBB SoCs.
> This series adds a new compatible string for Meson8 and adjusts the
> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
> accordingly.
>
> With some additional work the same driver could be used to add USB2
> support to Meson6 SoCs as well. However, due to lack of a clock
> controller driver for Meson6 and the lack of a board Meson6 support
> is not part of this series (Meson6 uses internal mux and divider clocks
> which are provided by the USB2 PHY registers, while the newer SoCs seem
> to use an alternative clock called "clk_32k_altsel")
merged, thanks.
-Kishon
>
>
> Changes since v1:
> - split the dt-bindings and the driver changes into separate patches
> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
> (from [0]) which means that this also applies on top of "phy: Group
> vendor specific phy drivers"
> - also update the Kconfig option name (instead of just the description)
>
>
> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>
>
> Martin Blumenstingl (2):
> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>
> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
> drivers/phy/amlogic/Kconfig | 6 +++---
> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
> 3 files changed, 8 insertions(+), 6 deletions(-)
>
^ permalink raw reply [flat|nested] 27+ messages in thread
[parent not found: <02656f9a-33d8-c009-7785-a6bd7d4b2617-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH v2 0/2] Meson8 USB PHY support
2017-06-01 13:12 ` Kishon Vijay Abraham I
(?)
@ 2017-06-02 19:14 ` Martin Blumenstingl
-1 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-06-02 19:14 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w,
johnyoun-HKixBCOQz3hWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Hi Kishon,
On Thu, Jun 1, 2017 at 3:12 PM, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> wrote:
>
>
> On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
>> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
>> and GXBB SoCs.
>> This series adds a new compatible string for Meson8 and adjusts the
>> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
>> accordingly.
>>
>> With some additional work the same driver could be used to add USB2
>> support to Meson6 SoCs as well. However, due to lack of a clock
>> controller driver for Meson6 and the lack of a board Meson6 support
>> is not part of this series (Meson6 uses internal mux and divider clocks
>> which are provided by the USB2 PHY registers, while the newer SoCs seem
>> to use an alternative clock called "clk_32k_altsel")
>
> merged, thanks.
thank you!
I have one question though:
you merged two of my patches, both from different series though!
currently part of your tree are:
- "Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY" [0]
- "phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs" [1]
the dt-bindings patch is for a new driver, while the meson8b-usb2
patch updates an existing driver.
still missing are the following two patches:
- "phy: meson: add USB2 PHY support for Meson GXL and GXM" [2] (the
actual driver for the dt-bindings from patch [0])
- "dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8
SoCs" [3] (the dt-bindings update related to meson8b-usb2 driver / the
patch from [1])
taking the dt-bindings patch for the meson8b-usb2-phy driver should be trivial.
you also reviewed the new GXL and GXM PHY driver and gave your "OK" on
v3 (I linked v4 below because that one is rebased so it applies after
the phy driver restructuring), see [4]
> -Kishon
>>
>>
>> Changes since v1:
>> - split the dt-bindings and the driver changes into separate patches
>> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
>> (from [0]) which means that this also applies on top of "phy: Group
>> vendor specific phy drivers"
>> - also update the Kconfig option name (instead of just the description)
>>
>>
>> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>>
>>
>> Martin Blumenstingl (2):
>> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
>> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>>
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/amlogic/Kconfig | 6 +++---
>> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 8 insertions(+), 6 deletions(-)
>>
Regards,
Martin
[0] https://patchwork.kernel.org/patch/9738625/
[1] https://patchwork.kernel.org/patch/9738635/
[2] https://patchwork.kernel.org/patch/9738631/
[3] https://patchwork.kernel.org/patch/9738637/
[4] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003500.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-06-02 19:14 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-06-02 19:14 UTC (permalink / raw)
To: linus-amlogic
Hi Kishon,
On Thu, Jun 1, 2017 at 3:12 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
>
> On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
>> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
>> and GXBB SoCs.
>> This series adds a new compatible string for Meson8 and adjusts the
>> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
>> accordingly.
>>
>> With some additional work the same driver could be used to add USB2
>> support to Meson6 SoCs as well. However, due to lack of a clock
>> controller driver for Meson6 and the lack of a board Meson6 support
>> is not part of this series (Meson6 uses internal mux and divider clocks
>> which are provided by the USB2 PHY registers, while the newer SoCs seem
>> to use an alternative clock called "clk_32k_altsel")
>
> merged, thanks.
thank you!
I have one question though:
you merged two of my patches, both from different series though!
currently part of your tree are:
- "Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY" [0]
- "phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs" [1]
the dt-bindings patch is for a new driver, while the meson8b-usb2
patch updates an existing driver.
still missing are the following two patches:
- "phy: meson: add USB2 PHY support for Meson GXL and GXM" [2] (the
actual driver for the dt-bindings from patch [0])
- "dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8
SoCs" [3] (the dt-bindings update related to meson8b-usb2 driver / the
patch from [1])
taking the dt-bindings patch for the meson8b-usb2-phy driver should be trivial.
you also reviewed the new GXL and GXM PHY driver and gave your "OK" on
v3 (I linked v4 below because that one is rebased so it applies after
the phy driver restructuring), see [4]
> -Kishon
>>
>>
>> Changes since v1:
>> - split the dt-bindings and the driver changes into separate patches
>> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
>> (from [0]) which means that this also applies on top of "phy: Group
>> vendor specific phy drivers"
>> - also update the Kconfig option name (instead of just the description)
>>
>>
>> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>>
>>
>> Martin Blumenstingl (2):
>> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
>> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>>
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/amlogic/Kconfig | 6 +++---
>> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 8 insertions(+), 6 deletions(-)
>>
Regards,
Martin
[0] https://patchwork.kernel.org/patch/9738625/
[1] https://patchwork.kernel.org/patch/9738635/
[2] https://patchwork.kernel.org/patch/9738631/
[3] https://patchwork.kernel.org/patch/9738637/
[4] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003500.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/2] Meson8 USB PHY support
@ 2017-06-02 19:14 ` Martin Blumenstingl
0 siblings, 0 replies; 27+ messages in thread
From: Martin Blumenstingl @ 2017-06-02 19:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kishon,
On Thu, Jun 1, 2017 at 3:12 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
>
> On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote:
>> The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b
>> and GXBB SoCs.
>> This series adds a new compatible string for Meson8 and adjusts the
>> Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings
>> accordingly.
>>
>> With some additional work the same driver could be used to add USB2
>> support to Meson6 SoCs as well. However, due to lack of a clock
>> controller driver for Meson6 and the lack of a board Meson6 support
>> is not part of this series (Meson6 uses internal mux and divider clocks
>> which are provided by the USB2 PHY registers, while the newer SoCs seem
>> to use an alternative clock called "clk_32k_altsel")
>
> merged, thanks.
thank you!
I have one question though:
you merged two of my patches, both from different series though!
currently part of your tree are:
- "Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY" [0]
- "phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs" [1]
the dt-bindings patch is for a new driver, while the meson8b-usb2
patch updates an existing driver.
still missing are the following two patches:
- "phy: meson: add USB2 PHY support for Meson GXL and GXM" [2] (the
actual driver for the dt-bindings from patch [0])
- "dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8
SoCs" [3] (the dt-bindings update related to meson8b-usb2 driver / the
patch from [1])
taking the dt-bindings patch for the meson8b-usb2-phy driver should be trivial.
you also reviewed the new GXL and GXM PHY driver and gave your "OK" on
v3 (I linked v4 below because that one is rebased so it applies after
the phy driver restructuring), see [4]
> -Kishon
>>
>>
>> Changes since v1:
>> - split the dt-bindings and the driver changes into separate patches
>> - rebased to apply on top of my other series "Meson GXL USB2 PHY driver"
>> (from [0]) which means that this also applies on top of "phy: Group
>> vendor specific phy drivers"
>> - also update the Kconfig option name (instead of just the description)
>>
>>
>> [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html
>>
>>
>> Martin Blumenstingl (2):
>> phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
>> dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs
>>
>> Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++-
>> drivers/phy/amlogic/Kconfig | 6 +++---
>> drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++--
>> 3 files changed, 8 insertions(+), 6 deletions(-)
>>
Regards,
Martin
[0] https://patchwork.kernel.org/patch/9738625/
[1] https://patchwork.kernel.org/patch/9738635/
[2] https://patchwork.kernel.org/patch/9738631/
[3] https://patchwork.kernel.org/patch/9738637/
[4] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003500.html
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2017-06-02 19:14 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-06 17:36 [PATCH] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs Martin Blumenstingl
2017-05-06 17:36 ` Martin Blumenstingl
2017-05-06 17:36 ` Martin Blumenstingl
2017-05-08 12:10 ` Kishon Vijay Abraham I
2017-05-08 12:10 ` Kishon Vijay Abraham I
2017-05-08 12:10 ` Kishon Vijay Abraham I
[not found] ` <950abc53-df2d-93dd-68d1-e9868445bb93-l0cyMroinI0@public.gmane.org>
2017-05-08 20:02 ` Martin Blumenstingl
2017-05-08 20:02 ` Martin Blumenstingl
2017-05-08 20:02 ` Martin Blumenstingl
[not found] ` <20170506173625.19501-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-05-20 14:12 ` [PATCH v2 0/2] Meson8 USB PHY support Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
[not found] ` <20170520141250.27388-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-05-20 14:12 ` [PATCH v2 1/2] phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
2017-05-20 14:12 ` [PATCH v2 2/2] dt-bindings: phy: meson8b-usb2-phy: add support for the " Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
2017-05-20 14:12 ` Martin Blumenstingl
[not found] ` <20170520141250.27388-3-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-05-30 22:51 ` Rob Herring
2017-05-30 22:51 ` Rob Herring
2017-05-30 22:51 ` Rob Herring
2017-06-01 13:12 ` [PATCH v2 0/2] Meson8 USB PHY support Kishon Vijay Abraham I
2017-06-01 13:12 ` Kishon Vijay Abraham I
2017-06-01 13:12 ` Kishon Vijay Abraham I
[not found] ` <02656f9a-33d8-c009-7785-a6bd7d4b2617-l0cyMroinI0@public.gmane.org>
2017-06-02 19:14 ` Martin Blumenstingl
2017-06-02 19:14 ` Martin Blumenstingl
2017-06-02 19:14 ` Martin Blumenstingl
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.