* [PULL] nvme updates @ 2020-08-19 19:22 Keith Busch 2020-08-23 13:56 ` Peter Maydell 0 siblings, 1 reply; 6+ messages in thread From: Keith Busch @ 2020-08-19 19:22 UTC (permalink / raw) To: qemu-devel, Kevin Wolf, Klaus Jensen; +Cc: Klaus Jensen We're trying our first nvme pull request from a dedicated development tree containing various fixes, cleanups, spec compliance, and welcoming Klaus Jensen to maintaining the emulated nvme device development. The following changes since commit d0ed6a69d399ae193959225cdeaa9382746c91cc: Update version for v5.1.0 release (2020-08-11 17:07:03 +0100) are available in the Git repository at: git://git.infradead.org/qemu-nvme.git nvme-next for you to fetch changes up to 9257c77e4f0feaefb76f02fff3dc8d60b420ea4d: hw/block/nvme: remove explicit qsg/iov parameters (2020-08-17 08:40:54 +0200) ---------------------------------------------------------------- Keith Busch (1): MAINTAINERS: update nvme entry Klaus Jensen (34): hw/block/nvme: bump spec data structures to v1.3 hw/block/nvme: fix missing endian conversion hw/block/nvme: additional tracing hw/block/nvme: add support for the abort command hw/block/nvme: add temperature threshold feature hw/block/nvme: mark fw slot 1 as read-only hw/block/nvme: add support for the get log page command hw/block/nvme: add support for the asynchronous event request command hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h hw/block/nvme: flush write cache when disabled hw/block/nvme: add remaining mandatory controller parameters hw/block/nvme: support the get/set features select and save fields hw/block/nvme: make sure ncqr and nsqr is valid hw/block/nvme: support identify namespace descriptor list hw/block/nvme: reject invalid nsid values in active namespace id list hw/block/nvme: enforce valid queue creation sequence hw/block/nvme: provide the mandatory subnqn field hw/block/nvme: bump supported version to v1.3 hw/block/nvme: memset preallocated requests structures hw/block/nvme: add mapping helpers hw/block/nvme: replace dma_acct with blk_acct equivalent hw/block/nvme: remove redundant has_sg member hw/block/nvme: destroy request iov before reuse hw/block/nvme: refactor dma read/write hw/block/nvme: add tracing to nvme_map_prp hw/block/nvme: add request mapping helper hw/block/nvme: verify validity of prp lists in the cmb hw/block/nvme: refactor request bounds checking hw/block/nvme: add check for mdts hw/block/nvme: be consistent about zeros vs zeroes hw/block/nvme: add ns/cmd references in NvmeRequest hw/block/nvme: consolidate qsg/iov clearing hw/block/nvme: use preallocated qsg/iov in nvme_dma_prp hw/block/nvme: remove explicit qsg/iov parameters Philippe Mathieu-Daudé (4): hw/block/nvme: Update specification URL hw/block/nvme: Use QEMU_PACKED on hardware/packet structures hw/block/nvme: Fix pmrmsc register size hw/block/nvme: Align I/O BAR to 4 KiB MAINTAINERS | 2 + block/nvme.c | 22 +- hw/block/nvme.c | 1136 +++++++++++++++++++++++++++++++++++++++++-------- hw/block/nvme.h | 26 +- hw/block/trace-events | 31 +- include/block/nvme.h | 271 +++++++++--- 6 files changed, 1248 insertions(+), 240 deletions(-) ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PULL] nvme updates 2020-08-19 19:22 [PULL] nvme updates Keith Busch @ 2020-08-23 13:56 ` Peter Maydell 2020-08-25 20:12 ` Keith Busch 0 siblings, 1 reply; 6+ messages in thread From: Peter Maydell @ 2020-08-23 13:56 UTC (permalink / raw) To: Keith Busch; +Cc: Kevin Wolf, Klaus Jensen, QEMU Developers, Klaus Jensen On Wed, 19 Aug 2020 at 20:23, Keith Busch <kbusch@kernel.org> wrote: > > We're trying our first nvme pull request from a dedicated development > tree containing various fixes, cleanups, spec compliance, and welcoming > Klaus Jensen to maintaining the emulated nvme device development. > > The following changes since commit d0ed6a69d399ae193959225cdeaa9382746c91cc: > > Update version for v5.1.0 release (2020-08-11 17:07:03 +0100) > > are available in the Git repository at: > > git://git.infradead.org/qemu-nvme.git nvme-next Hi; it looks like this isn't a gpg-signed tag? error: remotes/nvme/nvme-next: cannot verify a non-tag object of type commit. thanks -- PMM ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PULL] nvme updates 2020-08-23 13:56 ` Peter Maydell @ 2020-08-25 20:12 ` Keith Busch 2020-08-25 21:43 ` Peter Maydell 0 siblings, 1 reply; 6+ messages in thread From: Keith Busch @ 2020-08-25 20:12 UTC (permalink / raw) To: Peter Maydell; +Cc: Kevin Wolf, Klaus Jensen, QEMU Developers, Klaus Jensen On Sun, Aug 23, 2020 at 02:56:12PM +0100, Peter Maydell wrote: > On Wed, 19 Aug 2020 at 20:23, Keith Busch <kbusch@kernel.org> wrote: > > > > We're trying our first nvme pull request from a dedicated development > > tree containing various fixes, cleanups, spec compliance, and welcoming > > Klaus Jensen to maintaining the emulated nvme device development. > > > > The following changes since commit d0ed6a69d399ae193959225cdeaa9382746c91cc: > > > > Update version for v5.1.0 release (2020-08-11 17:07:03 +0100) > > > > are available in the Git repository at: > > > > git://git.infradead.org/qemu-nvme.git nvme-next > > Hi; it looks like this isn't a gpg-signed tag? > > error: remotes/nvme/nvme-next: cannot verify a non-tag object of type commit. Oops, sorry I forgot about that part of the procedure here. The repo should have a signed tag now: The following changes since commit d0ed6a69d399ae193959225cdeaa9382746c91cc: Update version for v5.1.0 release (2020-08-11 17:07:03 +0100) are available in the Git repository at: git://git.infradead.org/qemu-nvme.git tags/for-upstream for you to fetch changes up to 9257c77e4f0feaefb76f02fff3dc8d60b420ea4d: hw/block/nvme: remove explicit qsg/iov parameters (2020-08-17 08:40:54 +0200) ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PULL] nvme updates 2020-08-25 20:12 ` Keith Busch @ 2020-08-25 21:43 ` Peter Maydell 2020-08-25 22:28 ` Keith Busch 0 siblings, 1 reply; 6+ messages in thread From: Peter Maydell @ 2020-08-25 21:43 UTC (permalink / raw) To: Keith Busch; +Cc: Kevin Wolf, Klaus Jensen, QEMU Developers, Klaus Jensen On Tue, 25 Aug 2020 at 21:12, Keith Busch <kbusch@kernel.org> wrote: > > On Sun, Aug 23, 2020 at 02:56:12PM +0100, Peter Maydell wrote: > > Hi; it looks like this isn't a gpg-signed tag? > > > > error: remotes/nvme/nvme-next: cannot verify a non-tag object of type commit. > > Oops, sorry I forgot about that part of the procedure here. The repo should > have a signed tag now: Thanks; the gpg key setup looks ok. I notice that all the commits in the repo have Klaus's signed-off-by. Usually the expectation is that the person who sends the pull req is the one who's curated the tree and added their signed-off-by, but are you doing a jointly-administered tree here ? The build has a format string issue that shows up on OSX, Windows, and 32-bit builds: In file included from ../../hw/block/trace.h:1:0, from ../../hw/block/fdc.c:48: ./trace/trace-hw_block.h: In function '_nocheck__trace_pci_nvme_err_mdts': ./trace/trace-hw_block.h:2162:18: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type 'size_t {aka unsigned int}' [-Werror=format=] qemu_log("%d@%zu.%06zu:pci_nvme_err_mdts " "cid %"PRIu16" len %"PRIu64"" "\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ thanks -- PMM ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PULL] nvme updates 2020-08-25 21:43 ` Peter Maydell @ 2020-08-25 22:28 ` Keith Busch 2020-08-26 5:51 ` Klaus Jensen 0 siblings, 1 reply; 6+ messages in thread From: Keith Busch @ 2020-08-25 22:28 UTC (permalink / raw) To: Peter Maydell; +Cc: Kevin Wolf, Klaus Jensen, QEMU Developers, Klaus Jensen On Tue, Aug 25, 2020 at 10:43:23PM +0100, Peter Maydell wrote: > On Tue, 25 Aug 2020 at 21:12, Keith Busch <kbusch@kernel.org> wrote: > > > > On Sun, Aug 23, 2020 at 02:56:12PM +0100, Peter Maydell wrote: > > > Hi; it looks like this isn't a gpg-signed tag? > > > > > > error: remotes/nvme/nvme-next: cannot verify a non-tag object of type commit. > > > > Oops, sorry I forgot about that part of the procedure here. The repo should > > have a signed tag now: > > Thanks; the gpg key setup looks ok. > > I notice that all the commits in the repo have Klaus's signed-off-by. > Usually the expectation is that the person who sends the pull req > is the one who's curated the tree and added their signed-off-by, > but are you doing a jointly-administered tree here ? Right, Klaus is the primary committer for our joint repository, and I added his info to the MAINTAINERS file in the first commit of this pull. Since he's not currently listed upstream, I thought it made sense to make the introduction here. We'll coordinate pull requests as you've described going forward. > The build has a format string issue that shows up on OSX, Windows, > and 32-bit builds: Sorry about that, we'll fix it up ASAP. > In file included from ../../hw/block/trace.h:1:0, > from ../../hw/block/fdc.c:48: > ./trace/trace-hw_block.h: In function '_nocheck__trace_pci_nvme_err_mdts': > ./trace/trace-hw_block.h:2162:18: error: format '%llu' expects > argument of type 'long long unsigned int', but argument 6 has type > 'size_t {aka unsigned int}' [-Werror=format=] > qemu_log("%d@%zu.%06zu:pci_nvme_err_mdts " "cid %"PRIu16" len > %"PRIu64"" "\n", > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > thanks > -- PMM ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PULL] nvme updates 2020-08-25 22:28 ` Keith Busch @ 2020-08-26 5:51 ` Klaus Jensen 0 siblings, 0 replies; 6+ messages in thread From: Klaus Jensen @ 2020-08-26 5:51 UTC (permalink / raw) To: Keith Busch; +Cc: Kevin Wolf, Peter Maydell, QEMU Developers, Klaus Jensen [-- Attachment #1: Type: text/plain, Size: 2015 bytes --] On Aug 26 07:28, Keith Busch wrote: > On Tue, Aug 25, 2020 at 10:43:23PM +0100, Peter Maydell wrote: > > On Tue, 25 Aug 2020 at 21:12, Keith Busch <kbusch@kernel.org> wrote: > > > > > > On Sun, Aug 23, 2020 at 02:56:12PM +0100, Peter Maydell wrote: > > > > Hi; it looks like this isn't a gpg-signed tag? > > > > > > > > error: remotes/nvme/nvme-next: cannot verify a non-tag object of type commit. > > > > > > Oops, sorry I forgot about that part of the procedure here. The repo should > > > have a signed tag now: > > > > Thanks; the gpg key setup looks ok. > > > > I notice that all the commits in the repo have Klaus's signed-off-by. > > Usually the expectation is that the person who sends the pull req > > is the one who's curated the tree and added their signed-off-by, > > but are you doing a jointly-administered tree here ? > > Right, Klaus is the primary committer for our joint repository, and I > added his info to the MAINTAINERS file in the first commit of this pull. > Since he's not currently listed upstream, I thought it made sense to > make the introduction here. We'll coordinate pull requests as you've > described going forward. > > > The build has a format string issue that shows up on OSX, Windows, > > and 32-bit builds: > > Sorry about that, we'll fix it up ASAP. > > > In file included from ../../hw/block/trace.h:1:0, > > from ../../hw/block/fdc.c:48: > > ./trace/trace-hw_block.h: In function '_nocheck__trace_pci_nvme_err_mdts': > > ./trace/trace-hw_block.h:2162:18: error: format '%llu' expects > > argument of type 'long long unsigned int', but argument 6 has type > > 'size_t {aka unsigned int}' [-Werror=format=] > > qemu_log("%d@%zu.%06zu:pci_nvme_err_mdts " "cid %"PRIu16" len > > %"PRIu64"" "\n", > > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > That's on me. Keith, fixed in our tree now. Peter, this doesn't seem to get picked up by, say, `make docker-test-mingw@fedora`. Should it? [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-08-26 5:52 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-19 19:22 [PULL] nvme updates Keith Busch 2020-08-23 13:56 ` Peter Maydell 2020-08-25 20:12 ` Keith Busch 2020-08-25 21:43 ` Peter Maydell 2020-08-25 22:28 ` Keith Busch 2020-08-26 5:51 ` Klaus Jensen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.