* [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM @ 2013-12-13 1:04 Peter Bartoli 2013-12-23 23:50 ` Peter Maydell ` (3 more replies) 0 siblings, 4 replies; 8+ messages in thread From: Peter Bartoli @ 2013-12-13 1:04 UTC (permalink / raw) To: qemu-devel Public bug reported: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. ** Affects: qemu Importance: Undecided Status: New ** Attachment added: "qemu.tcx.png" https://bugs.launchpad.net/bugs/1260555/+attachment/3928423/+files/qemu.tcx.png -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Status in QEMU: New Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM 2013-12-13 1:04 [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Peter Bartoli @ 2013-12-23 23:50 ` Peter Maydell 2013-12-24 0:08 ` Peter Bartoli 2013-12-24 14:28 ` Mark Cave-Ayland 2013-12-24 2:43 ` [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM Peter Maydell ` (2 subsequent siblings) 3 siblings, 2 replies; 8+ messages in thread From: Peter Maydell @ 2013-12-23 23:50 UTC (permalink / raw) To: Bug 1260555; +Cc: QEMU Developers On 13 December 2013 01:04, Peter Bartoli <peter@bartoli.org> wrote: > Public bug reported: > > > The 32-bit SPARC emulator's TCX emulation seems to work with > OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa This is actually two separate issues. (1) This SS-5 ROM doesn't boot on QEMU. You can see this if you try it on a Linux host : the display stays black. (2) The Cocoa UI frontend doesn't black the screen on startup (or on resize) the way the SDL frontend does, so if the guest hasn't tried to display anything to the screen post-resize you get the old garbage of the window decoration displayed. We should probably fix (2), though it's only a cosmetic issue and you won't even see it if you have a functioning guest. I expect you care more about (1) and you'll do better with a bug report that's clear that it's a generic SPARC guest issue. thanks -- PMM ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM 2013-12-23 23:50 ` Peter Maydell @ 2013-12-24 0:08 ` Peter Bartoli 2013-12-24 14:28 ` Mark Cave-Ayland 1 sibling, 0 replies; 8+ messages in thread From: Peter Bartoli @ 2013-12-24 0:08 UTC (permalink / raw) To: qemu-devel On Dec 23, 2013, at 3:50 PM, Peter Maydell <peter.maydell@linaro.org> wrote: > On 13 December 2013 01:04, Peter Bartoli <peter@bartoli.org> wrote: >> Public bug reported: >> >> >> The 32-bit SPARC emulator's TCX emulation seems to work with >> OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa > > This is actually two separate issues. > > (1) This SS-5 ROM doesn't boot on QEMU. You can see this if > you try it on a Linux host : the display stays black. > > (2) The Cocoa UI frontend doesn't black the screen on startup > (or on resize) the way the SDL frontend does, so if the guest > hasn't tried to display anything to the screen post-resize you > get the old garbage of the window decoration displayed. > > We should probably fix (2), though it's only a cosmetic issue > and you won't even see it if you have a functioning guest. > I expect you care more about (1) and you'll do better with a > bug report that's clear that it's a generic SPARC guest issue. > > thanks > -- PMM > > > ** Summary changed: > > - qemu-system-sparc UI doesn't work with Cocoa and Sun ROM > + SS-5 emulation doesn't work with Sun boot ROM > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1260555 > > Title: > SS-5 emulation doesn't work with Sun boot ROM > > Status in QEMU: > New > > Bug description: > > The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. > > The following is my Qemu command: > > sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ > -g 1024x768x24 \ > -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ > -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ > -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ > -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ > -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown > > Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS > X, and config.log is not helpful to figure out why, but this is > another issue. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions Please accept my apology if I'm missing something, but I don't understand what you mean by #1; this ROM actually *does* boot on QEMU. Just not without the "-nographic" option. -peter -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: SS-5 emulation doesn't work with Sun boot ROM Status in QEMU: New Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM 2013-12-23 23:50 ` Peter Maydell 2013-12-24 0:08 ` Peter Bartoli @ 2013-12-24 14:28 ` Mark Cave-Ayland 1 sibling, 0 replies; 8+ messages in thread From: Mark Cave-Ayland @ 2013-12-24 14:28 UTC (permalink / raw) To: Bug 1260555; +Cc: Peter Maydell, qemu-devel On 23/12/13 23:50, Peter Maydell wrote: >> The 32-bit SPARC emulator's TCX emulation seems to work with >> OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa > > This is actually two separate issues. > > (1) This SS-5 ROM doesn't boot on QEMU. You can see this if > you try it on a Linux host : the display stays black. FWIW this should now work if you replace the QEMU,tcx.bin file from QEMU 1.7/master with the one uploaded to this bug: https://bugs.launchpad.net/qemu/+bug/1262081. As OpenBIOS doesn't have its own git infrastructure, I need to get the git.qemu.org git-svn mirror updated by Anthony in order to send a pull request with updated binaries (Blue Swirl set up OpenBIOS to build as a git submodule from the git.qemu.org mirror). I'll try and get them updated as soon as I can. ATB, Mark. ^ permalink raw reply [flat|nested] 8+ messages in thread
* [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM 2013-12-13 1:04 [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Peter Bartoli 2013-12-23 23:50 ` Peter Maydell @ 2013-12-24 2:43 ` Peter Maydell 2013-12-24 23:32 ` [Qemu-devel] [Bug 1260555] " Peter Bartoli 2013-12-24 10:35 ` [Qemu-devel] [Bug 1260555] " Peter Maydell 2016-06-14 19:46 ` T. Huth 3 siblings, 1 reply; 8+ messages in thread From: Peter Maydell @ 2013-12-24 2:43 UTC (permalink / raw) To: qemu-devel Ah, I hadn't tried -nographic. However, my general point still stands: whether you run this on MacOS or Linux, you get the same behaviour. Experimenting I see that all that's happening here is that '-nographic' gives you a serial console, which the ROM outputs to. You can also specify that with '-serial stdio' instead, in which case you get ROM output to the terminal and a blank display. So the two parts of this bug are: (1) no graphics output with this ROM (2) cocoa UI doesn't properly show a black window if there is no graphics output from the guest I have some patches which fix (2). (If you have a bug which is a general QEMU emulation bug, it's a really bad idea to describe it using phrases like"on Cocoa" or "on MacOS" which suggest that it's a MacOS host specific bug, because this will mean that it will get ignored by almost all the developers, most of whom use Linux. If you have access to a suitable machine it's definitely helpful to try reproducing on a Linux box before reporting a bug. If you've only been able to test on Mac you should say so somewhere in the bug report, though.) -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: SS-5 emulation doesn't work with Sun boot ROM Status in QEMU: New Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [Bug 1260555] SS-5 emulation doesn't work with Sun boot ROM 2013-12-24 2:43 ` [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM Peter Maydell @ 2013-12-24 23:32 ` Peter Bartoli 0 siblings, 0 replies; 8+ messages in thread From: Peter Bartoli @ 2013-12-24 23:32 UTC (permalink / raw) To: qemu-devel Thanks, Peter ... will do, definitely have Linux and can use it to test in the future before reporting other bugs. That said, I think you can close this one. -peter On Dec 23, 2013, at 6:43 PM, Peter Maydell <peter.maydell@linaro.org> wrote: > Ah, I hadn't tried -nographic. However, my general point still stands: > whether you run this on MacOS or Linux, you get the same behaviour. > > Experimenting I see that all that's happening here is that '-nographic' > gives you a serial console, which the ROM outputs to. You can also > specify that with '-serial stdio' instead, in which case you get ROM > output to the terminal and a blank display. So the two parts of this bug > are: > > (1) no graphics output with this ROM > (2) cocoa UI doesn't properly show a black window if there is no graphics output from the guest > > I have some patches which fix (2). > > (If you have a bug which is a general QEMU emulation bug, it's a really > bad idea to describe it using phrases like"on Cocoa" or "on MacOS" which > suggest that it's a MacOS host specific bug, because this will mean that > it will get ignored by almost all the developers, most of whom use > Linux. If you have access to a suitable machine it's definitely helpful > to try reproducing on a Linux box before reporting a bug. If you've only > been able to test on Mac you should say so somewhere in the bug report, > though.) > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1260555 > > Title: > SS-5 emulation doesn't work with Sun boot ROM > > Status in QEMU: > New > > Bug description: > > The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. > > The following is my Qemu command: > > sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ > -g 1024x768x24 \ > -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ > -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ > -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ > -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ > -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown > > Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS > X, and config.log is not helpful to figure out why, but this is > another issue. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: SS-5 emulation doesn't work with Sun boot ROM Status in QEMU: New Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
* [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM 2013-12-13 1:04 [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Peter Bartoli 2013-12-23 23:50 ` Peter Maydell 2013-12-24 2:43 ` [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM Peter Maydell @ 2013-12-24 10:35 ` Peter Maydell 2016-06-14 19:46 ` T. Huth 3 siblings, 0 replies; 8+ messages in thread From: Peter Maydell @ 2013-12-24 10:35 UTC (permalink / raw) To: qemu-devel These two patches for the Cocoa UI: http://patchwork.ozlabs.org/patch/304879/ http://patchwork.ozlabs.org/patch/304878/ fix issue (2) so Cocoa now also displays a plain black window for this guest, like the SDL frontend does on Linux. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: SS-5 emulation doesn't work with Sun boot ROM Status in QEMU: New Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
* [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM 2013-12-13 1:04 [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Peter Bartoli ` (2 preceding siblings ...) 2013-12-24 10:35 ` [Qemu-devel] [Bug 1260555] " Peter Maydell @ 2016-06-14 19:46 ` T. Huth 3 siblings, 0 replies; 8+ messages in thread From: T. Huth @ 2016-06-14 19:46 UTC (permalink / raw) To: qemu-devel ** Changed in: qemu Status: New => Fix Released -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1260555 Title: SS-5 emulation doesn't work with Sun boot ROM Status in QEMU: Fix Released Bug description: The 32-bit SPARC emulator's TCX emulation seems to work with OpenBIOS, but doesn't work with a SparcStation ROM on Cocoa. Screenshot attached. Using version 1.7.0 on Mac OS X 10.9 via MacPorts and compiled directly from source, though this problem has carried over from Mac OS X 10.8 and many earlier versions of Qemu. The following is my Qemu command: sudo qemu-system-sparc -m 256 -M SS-5 -bios /home/img/ROMs/sun/ss5-170.bin \ -g 1024x768x24 \ -drive file=/home/doc/VMs/slagheap/sd0.raw,if=scsi,bus=0,unit=3 \ -drive file=/home/doc/VMs/slagheap/sd1.raw,if=scsi,bus=0,unit=1 \ -drive file=/home/doc/VMs/slagheap/sd2.raw,if=scsi,bus=0,unit=2 \ -net nic,macaddr=DE:EE:DD:FF:EE:DD,model=lance \ -net tap,ifname=tap0,script=/home/doc/VMs/slagheap/ifup,downscript=/home/doc/VMs/slagheap/ifdown Note: also can't compile Qemu w/ SDL support from MacPorts on Mac OS X, and config.log is not helpful to figure out why, but this is another issue. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1260555/+subscriptions ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-06-14 19:56 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-12-13 1:04 [Qemu-devel] [Bug 1260555] [NEW] qemu-system-sparc UI doesn't work with Cocoa and Sun ROM Peter Bartoli 2013-12-23 23:50 ` Peter Maydell 2013-12-24 0:08 ` Peter Bartoli 2013-12-24 14:28 ` Mark Cave-Ayland 2013-12-24 2:43 ` [Qemu-devel] [Bug 1260555] Re: SS-5 emulation doesn't work with Sun boot ROM Peter Maydell 2013-12-24 23:32 ` [Qemu-devel] [Bug 1260555] " Peter Bartoli 2013-12-24 10:35 ` [Qemu-devel] [Bug 1260555] " Peter Maydell 2016-06-14 19:46 ` T. Huth
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.