[PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Marc Zyngier]

Here's yet another stab at enabling QEMU on systems with
pathologically reduced IPA ranges such as the Apple M1 (previous
version at [1]). Eventually, we're able to run a KVM guest with more
than just 3GB of RAM on a system with a 36bit IPA space, and at most
123 vCPUs.

This also addresses some pathological QEMU behaviours, where the
highmem property is used as a flag allowing exposure of devices that
can't possibly fit in the PA space of the VM, resulting in a guest
failure.

In the end, we generalise the notion of PA space when exposing
individual devices in the expanded memory map, and treat highmem as
another flavour of PA space restriction.

This series does a few things:

- introduce new attributes to control the enabling of the highmem
  GICv3 redistributors and the highmem PCIe MMIO range

- correctly cap the PA range with highmem is off

- generalise the highmem behaviour to any PA range

- disable each highmem device region that doesn't fit in the PA range

- cleanup uses of highmem outside of virt_set_memmap()

This has been tested on an M1-based Mac-mini running Linux v5.16-rc6
with both KVM and TCG.

* From v4: [1]

  - Moved cpu_type_valid() check before we compute the memory map
  - Drop useless MAX() when computing highest_gpa
  - Fixed more deviations from the QEMU coding style
  - Collected Eric's RBs, with thanks

[1]: https://lore.kernel.org/r/20220107163324.2491209-1-maz@kernel.org

Marc Zyngier (6):
  hw/arm/virt: Add a control for the the highmem PCIe MMIO
  hw/arm/virt: Add a control for the the highmem redistributors
  hw/arm/virt: Honor highmem setting when computing the memory map
  hw/arm/virt: Use the PA range to compute the memory map
  hw/arm/virt: Disable highmem devices that don't fit in the PA range
  hw/arm/virt: Drop superfluous checks against highmem

 hw/arm/virt-acpi-build.c | 10 ++--
 hw/arm/virt.c            | 98 ++++++++++++++++++++++++++++++++++------
 include/hw/arm/virt.h    |  5 +-
 3 files changed, 91 insertions(+), 22 deletions(-)

-- 
2.30.2

[PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Marc Zyngier]

Here's yet another stab at enabling QEMU on systems with
pathologically reduced IPA ranges such as the Apple M1 (previous
version at [1]). Eventually, we're able to run a KVM guest with more
than just 3GB of RAM on a system with a 36bit IPA space, and at most
123 vCPUs.

This also addresses some pathological QEMU behaviours, where the
highmem property is used as a flag allowing exposure of devices that
can't possibly fit in the PA space of the VM, resulting in a guest
failure.

In the end, we generalise the notion of PA space when exposing
individual devices in the expanded memory map, and treat highmem as
another flavour of PA space restriction.

This series does a few things:

- introduce new attributes to control the enabling of the highmem
  GICv3 redistributors and the highmem PCIe MMIO range

- correctly cap the PA range with highmem is off

- generalise the highmem behaviour to any PA range

- disable each highmem device region that doesn't fit in the PA range

- cleanup uses of highmem outside of virt_set_memmap()

This has been tested on an M1-based Mac-mini running Linux v5.16-rc6
with both KVM and TCG.

* From v4: [1]

  - Moved cpu_type_valid() check before we compute the memory map
  - Drop useless MAX() when computing highest_gpa
  - Fixed more deviations from the QEMU coding style
  - Collected Eric's RBs, with thanks

[1]: https://lore.kernel.org/r/20220107163324.2491209-1-maz@kernel.org

Marc Zyngier (6):
  hw/arm/virt: Add a control for the the highmem PCIe MMIO
  hw/arm/virt: Add a control for the the highmem redistributors
  hw/arm/virt: Honor highmem setting when computing the memory map
  hw/arm/virt: Use the PA range to compute the memory map
  hw/arm/virt: Disable highmem devices that don't fit in the PA range
  hw/arm/virt: Drop superfluous checks against highmem

 hw/arm/virt-acpi-build.c | 10 ++--
 hw/arm/virt.c            | 98 ++++++++++++++++++++++++++++++++++------
 include/hw/arm/virt.h    |  5 +-
 3 files changed, 91 insertions(+), 22 deletions(-)

-- 
2.30.2

[PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Marc Zyngier]

Here's yet another stab at enabling QEMU on systems with
pathologically reduced IPA ranges such as the Apple M1 (previous
version at [1]). Eventually, we're able to run a KVM guest with more
than just 3GB of RAM on a system with a 36bit IPA space, and at most
123 vCPUs.

This also addresses some pathological QEMU behaviours, where the
highmem property is used as a flag allowing exposure of devices that
can't possibly fit in the PA space of the VM, resulting in a guest
failure.

In the end, we generalise the notion of PA space when exposing
individual devices in the expanded memory map, and treat highmem as
another flavour of PA space restriction.

This series does a few things:

- introduce new attributes to control the enabling of the highmem
  GICv3 redistributors and the highmem PCIe MMIO range

- correctly cap the PA range with highmem is off

- generalise the highmem behaviour to any PA range

- disable each highmem device region that doesn't fit in the PA range

- cleanup uses of highmem outside of virt_set_memmap()

This has been tested on an M1-based Mac-mini running Linux v5.16-rc6
with both KVM and TCG.

* From v4: [1]

  - Moved cpu_type_valid() check before we compute the memory map
  - Drop useless MAX() when computing highest_gpa
  - Fixed more deviations from the QEMU coding style
  - Collected Eric's RBs, with thanks

[1]: https://lore.kernel.org/r/20220107163324.2491209-1-maz@kernel.org

Marc Zyngier (6):
  hw/arm/virt: Add a control for the the highmem PCIe MMIO
  hw/arm/virt: Add a control for the the highmem redistributors
  hw/arm/virt: Honor highmem setting when computing the memory map
  hw/arm/virt: Use the PA range to compute the memory map
  hw/arm/virt: Disable highmem devices that don't fit in the PA range
  hw/arm/virt: Drop superfluous checks against highmem

 hw/arm/virt-acpi-build.c | 10 ++--
 hw/arm/virt.c            | 98 ++++++++++++++++++++++++++++++++++------
 include/hw/arm/virt.h    |  5 +-
 3 files changed, 91 insertions(+), 22 deletions(-)

-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe ECAM
region using highmem_ecam, let's add a control for the highmem
PCIe MMIO  region.

Similarily to highmem_ecam, this region is disabled when highmem
is off.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 10 ++++------
 hw/arm/virt.c            |  7 +++++--
 include/hw/arm/virt.h    |  1 +
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index f2514ce77c..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
 }
 
 static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
-                              uint32_t irq, bool use_highmem, bool highmem_ecam,
-                              VirtMachineState *vms)
+                              uint32_t irq, VirtMachineState *vms)
 {
-    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
+    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
     struct GPEXConfig cfg = {
         .mmio32 = memmap[VIRT_PCIE_MMIO],
         .pio    = memmap[VIRT_PCIE_PIO],
@@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
         .bus    = vms->bus,
     };
 
-    if (use_highmem) {
+    if (vms->highmem_mmio) {
         cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
     }
 
@@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
     acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
                     (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
-    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
-                      vms->highmem, vms->highmem_ecam, vms);
+    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
     if (vms->acpi_dev) {
         build_ged_aml(scope, "\\_SB."GED_DEVICE,
                       HOTPLUG_HANDLER(vms->acpi_dev),
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b45b52c90e..ed8ea96acc 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
                              mmio_reg, base_mmio, size_mmio);
     memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         /* Map high MMIO space */
         MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
 
@@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
     qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
                                  2, base_ecam, 2, size_ecam);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
                                      1, FDT_PCI_RANGE_IOPORT, 2, 0,
                                      2, base_pio, 2, size_pio,
@@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
+    vms->highmem_mmio &= vms->highmem;
+
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
     vms->gic_version = VIRT_GIC_VERSION_NOSEL;
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
+    vms->highmem_mmio = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index dc6b66ffc8..9c54acd10d 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -143,6 +143,7 @@ struct VirtMachineState {
     bool secure;
     bool highmem;
     bool highmem_ecam;
+    bool highmem_mmio;
     bool its;
     bool tcg_its;
     bool virt;
-- 
2.30.2

[PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe ECAM
region using highmem_ecam, let's add a control for the highmem
PCIe MMIO  region.

Similarily to highmem_ecam, this region is disabled when highmem
is off.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 10 ++++------
 hw/arm/virt.c            |  7 +++++--
 include/hw/arm/virt.h    |  1 +
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index f2514ce77c..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
 }
 
 static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
-                              uint32_t irq, bool use_highmem, bool highmem_ecam,
-                              VirtMachineState *vms)
+                              uint32_t irq, VirtMachineState *vms)
 {
-    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
+    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
     struct GPEXConfig cfg = {
         .mmio32 = memmap[VIRT_PCIE_MMIO],
         .pio    = memmap[VIRT_PCIE_PIO],
@@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
         .bus    = vms->bus,
     };
 
-    if (use_highmem) {
+    if (vms->highmem_mmio) {
         cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
     }
 
@@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
     acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
                     (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
-    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
-                      vms->highmem, vms->highmem_ecam, vms);
+    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
     if (vms->acpi_dev) {
         build_ged_aml(scope, "\\_SB."GED_DEVICE,
                       HOTPLUG_HANDLER(vms->acpi_dev),
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b45b52c90e..ed8ea96acc 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
                              mmio_reg, base_mmio, size_mmio);
     memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         /* Map high MMIO space */
         MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
 
@@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
     qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
                                  2, base_ecam, 2, size_ecam);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
                                      1, FDT_PCI_RANGE_IOPORT, 2, 0,
                                      2, base_pio, 2, size_pio,
@@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
+    vms->highmem_mmio &= vms->highmem;
+
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
     vms->gic_version = VIRT_GIC_VERSION_NOSEL;
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
+    vms->highmem_mmio = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index dc6b66ffc8..9c54acd10d 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -143,6 +143,7 @@ struct VirtMachineState {
     bool secure;
     bool highmem;
     bool highmem_ecam;
+    bool highmem_mmio;
     bool its;
     bool tcg_its;
     bool virt;
-- 
2.30.2

[PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe ECAM
region using highmem_ecam, let's add a control for the highmem
PCIe MMIO  region.

Similarily to highmem_ecam, this region is disabled when highmem
is off.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 10 ++++------
 hw/arm/virt.c            |  7 +++++--
 include/hw/arm/virt.h    |  1 +
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index f2514ce77c..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
 }
 
 static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
-                              uint32_t irq, bool use_highmem, bool highmem_ecam,
-                              VirtMachineState *vms)
+                              uint32_t irq, VirtMachineState *vms)
 {
-    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
+    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
     struct GPEXConfig cfg = {
         .mmio32 = memmap[VIRT_PCIE_MMIO],
         .pio    = memmap[VIRT_PCIE_PIO],
@@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
         .bus    = vms->bus,
     };
 
-    if (use_highmem) {
+    if (vms->highmem_mmio) {
         cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
     }
 
@@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
     acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
                     (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
-    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
-                      vms->highmem, vms->highmem_ecam, vms);
+    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
     if (vms->acpi_dev) {
         build_ged_aml(scope, "\\_SB."GED_DEVICE,
                       HOTPLUG_HANDLER(vms->acpi_dev),
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b45b52c90e..ed8ea96acc 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
                              mmio_reg, base_mmio, size_mmio);
     memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         /* Map high MMIO space */
         MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
 
@@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
     qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
                                  2, base_ecam, 2, size_ecam);
 
-    if (vms->highmem) {
+    if (vms->highmem_mmio) {
         qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
                                      1, FDT_PCI_RANGE_IOPORT, 2, 0,
                                      2, base_pio, 2, size_pio,
@@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
+    vms->highmem_mmio &= vms->highmem;
+
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
     vms->gic_version = VIRT_GIC_VERSION_NOSEL;
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
+    vms->highmem_mmio = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index dc6b66ffc8..9c54acd10d 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -143,6 +143,7 @@ struct VirtMachineState {
     bool secure;
     bool highmem;
     bool highmem_ecam;
+    bool highmem_mmio;
     bool its;
     bool tcg_its;
     bool virt;
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe ECAM
> region using highmem_ecam, let's add a control for the highmem
> PCIe MMIO  region.
>
> Similarily to highmem_ecam, this region is disabled when highmem
> is off.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 10 ++++------
>  hw/arm/virt.c            |  7 +++++--
>  include/hw/arm/virt.h    |  1 +
>  3 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index f2514ce77c..449fab0080 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
>  }
>  
>  static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
> -                              uint32_t irq, bool use_highmem, bool highmem_ecam,
> -                              VirtMachineState *vms)
> +                              uint32_t irq, VirtMachineState *vms)
>  {
> -    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
> +    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
>      struct GPEXConfig cfg = {
>          .mmio32 = memmap[VIRT_PCIE_MMIO],
>          .pio    = memmap[VIRT_PCIE_PIO],
> @@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
>          .bus    = vms->bus,
>      };
>  
> -    if (use_highmem) {
> +    if (vms->highmem_mmio) {
>          cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
>      }
>  
> @@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>      acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
>      acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
>                      (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
> -    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
> -                      vms->highmem, vms->highmem_ecam, vms);
> +    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
>      if (vms->acpi_dev) {
>          build_ged_aml(scope, "\\_SB."GED_DEVICE,
>                        HOTPLUG_HANDLER(vms->acpi_dev),
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index b45b52c90e..ed8ea96acc 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
>                               mmio_reg, base_mmio, size_mmio);
>      memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          /* Map high MMIO space */
>          MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
>  
> @@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
>      qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
>                                   2, base_ecam, 2, size_ecam);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
>                                       1, FDT_PCI_RANGE_IOPORT, 2, 0,
>                                       2, base_pio, 2, size_pio,
> @@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
>  
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
> +    vms->highmem_mmio &= vms->highmem;
> +
>      create_gic(vms, sysmem);
>  
>      virt_cpu_post_init(vms, sysmem);
> @@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
>      vms->gic_version = VIRT_GIC_VERSION_NOSEL;
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
> +    vms->highmem_mmio = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index dc6b66ffc8..9c54acd10d 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -143,6 +143,7 @@ struct VirtMachineState {
>      bool secure;
>      bool highmem;
>      bool highmem_ecam;
> +    bool highmem_mmio;
>      bool its;
>      bool tcg_its;
>      bool virt;

Re: [PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe ECAM
> region using highmem_ecam, let's add a control for the highmem
> PCIe MMIO  region.
>
> Similarily to highmem_ecam, this region is disabled when highmem
> is off.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 10 ++++------
>  hw/arm/virt.c            |  7 +++++--
>  include/hw/arm/virt.h    |  1 +
>  3 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index f2514ce77c..449fab0080 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
>  }
>  
>  static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
> -                              uint32_t irq, bool use_highmem, bool highmem_ecam,
> -                              VirtMachineState *vms)
> +                              uint32_t irq, VirtMachineState *vms)
>  {
> -    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
> +    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
>      struct GPEXConfig cfg = {
>          .mmio32 = memmap[VIRT_PCIE_MMIO],
>          .pio    = memmap[VIRT_PCIE_PIO],
> @@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
>          .bus    = vms->bus,
>      };
>  
> -    if (use_highmem) {
> +    if (vms->highmem_mmio) {
>          cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
>      }
>  
> @@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>      acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
>      acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
>                      (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
> -    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
> -                      vms->highmem, vms->highmem_ecam, vms);
> +    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
>      if (vms->acpi_dev) {
>          build_ged_aml(scope, "\\_SB."GED_DEVICE,
>                        HOTPLUG_HANDLER(vms->acpi_dev),
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index b45b52c90e..ed8ea96acc 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
>                               mmio_reg, base_mmio, size_mmio);
>      memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          /* Map high MMIO space */
>          MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
>  
> @@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
>      qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
>                                   2, base_ecam, 2, size_ecam);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
>                                       1, FDT_PCI_RANGE_IOPORT, 2, 0,
>                                       2, base_pio, 2, size_pio,
> @@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
>  
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
> +    vms->highmem_mmio &= vms->highmem;
> +
>      create_gic(vms, sysmem);
>  
>      virt_cpu_post_init(vms, sysmem);
> @@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
>      vms->gic_version = VIRT_GIC_VERSION_NOSEL;
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
> +    vms->highmem_mmio = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index dc6b66ffc8..9c54acd10d 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -143,6 +143,7 @@ struct VirtMachineState {
>      bool secure;
>      bool highmem;
>      bool highmem_ecam;
> +    bool highmem_mmio;
>      bool its;
>      bool tcg_its;
>      bool virt;

Re: [PATCH v5 1/6] hw/arm/virt: Add a control for the the highmem PCIe MMIO

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe ECAM
> region using highmem_ecam, let's add a control for the highmem
> PCIe MMIO  region.
>
> Similarily to highmem_ecam, this region is disabled when highmem
> is off.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 10 ++++------
>  hw/arm/virt.c            |  7 +++++--
>  include/hw/arm/virt.h    |  1 +
>  3 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index f2514ce77c..449fab0080 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -158,10 +158,9 @@ static void acpi_dsdt_add_virtio(Aml *scope,
>  }
>  
>  static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
> -                              uint32_t irq, bool use_highmem, bool highmem_ecam,
> -                              VirtMachineState *vms)
> +                              uint32_t irq, VirtMachineState *vms)
>  {
> -    int ecam_id = VIRT_ECAM_ID(highmem_ecam);
> +    int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
>      struct GPEXConfig cfg = {
>          .mmio32 = memmap[VIRT_PCIE_MMIO],
>          .pio    = memmap[VIRT_PCIE_PIO],
> @@ -170,7 +169,7 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
>          .bus    = vms->bus,
>      };
>  
> -    if (use_highmem) {
> +    if (vms->highmem_mmio) {
>          cfg.mmio64 = memmap[VIRT_HIGH_PCIE_MMIO];
>      }
>  
> @@ -869,8 +868,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>      acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]);
>      acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
>                      (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
> -    acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
> -                      vms->highmem, vms->highmem_ecam, vms);
> +    acpi_dsdt_add_pci(scope, memmap, irqmap[VIRT_PCIE] + ARM_SPI_BASE, vms);
>      if (vms->acpi_dev) {
>          build_ged_aml(scope, "\\_SB."GED_DEVICE,
>                        HOTPLUG_HANDLER(vms->acpi_dev),
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index b45b52c90e..ed8ea96acc 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1412,7 +1412,7 @@ static void create_pcie(VirtMachineState *vms)
>                               mmio_reg, base_mmio, size_mmio);
>      memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          /* Map high MMIO space */
>          MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);
>  
> @@ -1466,7 +1466,7 @@ static void create_pcie(VirtMachineState *vms)
>      qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
>                                   2, base_ecam, 2, size_ecam);
>  
> -    if (vms->highmem) {
> +    if (vms->highmem_mmio) {
>          qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "ranges",
>                                       1, FDT_PCI_RANGE_IOPORT, 2, 0,
>                                       2, base_pio, 2, size_pio,
> @@ -2105,6 +2105,8 @@ static void machvirt_init(MachineState *machine)
>  
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
> +    vms->highmem_mmio &= vms->highmem;
> +
>      create_gic(vms, sysmem);
>  
>      virt_cpu_post_init(vms, sysmem);
> @@ -2802,6 +2804,7 @@ static void virt_instance_init(Object *obj)
>      vms->gic_version = VIRT_GIC_VERSION_NOSEL;
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
> +    vms->highmem_mmio = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index dc6b66ffc8..9c54acd10d 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -143,6 +143,7 @@ struct VirtMachineState {
>      bool secure;
>      bool highmem;
>      bool highmem_ecam;
> +    bool highmem_mmio;
>      bool its;
>      bool tcg_its;
>      bool virt;

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe region
using highmem_ecam, let's add a control for the highmem GICv3
redistributor region.

Similarily to highmem_ecam, these redistributors are disabled when
highmem is off.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 ++
 hw/arm/virt.c            | 2 ++
 include/hw/arm/virt.h    | 4 +++-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..0757c28f69 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
+    vms->highmem_redists &= vms->highmem;
+
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ed8ea96acc..e734a75850 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
     vms->highmem_mmio &= vms->highmem;
+    vms->highmem_redists &= vms->highmem;
 
     create_gic(vms, sysmem);
 
@@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
     vms->highmem_mmio = true;
+    vms->highmem_redists = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 9c54acd10d..dc9fa26faa 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -144,6 +144,7 @@ struct VirtMachineState {
     bool highmem;
     bool highmem_ecam;
     bool highmem_mmio;
+    bool highmem_redists;
     bool its;
     bool tcg_its;
     bool virt;
@@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
 
     assert(vms->gic_version == VIRT_GIC_VERSION_3);
 
-    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
+    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
+            vms->highmem_redists) ? 2 : 1;
 }
 
 #endif /* QEMU_ARM_VIRT_H */
-- 
2.30.2

[PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe region
using highmem_ecam, let's add a control for the highmem GICv3
redistributor region.

Similarily to highmem_ecam, these redistributors are disabled when
highmem is off.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 ++
 hw/arm/virt.c            | 2 ++
 include/hw/arm/virt.h    | 4 +++-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..0757c28f69 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
+    vms->highmem_redists &= vms->highmem;
+
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ed8ea96acc..e734a75850 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
     vms->highmem_mmio &= vms->highmem;
+    vms->highmem_redists &= vms->highmem;
 
     create_gic(vms, sysmem);
 
@@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
     vms->highmem_mmio = true;
+    vms->highmem_redists = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 9c54acd10d..dc9fa26faa 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -144,6 +144,7 @@ struct VirtMachineState {
     bool highmem;
     bool highmem_ecam;
     bool highmem_mmio;
+    bool highmem_redists;
     bool its;
     bool tcg_its;
     bool virt;
@@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
 
     assert(vms->gic_version == VIRT_GIC_VERSION_3);
 
-    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
+    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
+            vms->highmem_redists) ? 2 : 1;
 }
 
 #endif /* QEMU_ARM_VIRT_H */
-- 
2.30.2

[PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Marc Zyngier]

Just like we can control the enablement of the highmem PCIe region
using highmem_ecam, let's add a control for the highmem GICv3
redistributor region.

Similarily to highmem_ecam, these redistributors are disabled when
highmem is off.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 ++
 hw/arm/virt.c            | 2 ++
 include/hw/arm/virt.h    | 4 +++-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..0757c28f69 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
+    vms->highmem_redists &= vms->highmem;
+
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ed8ea96acc..e734a75850 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
     vms->highmem_mmio &= vms->highmem;
+    vms->highmem_redists &= vms->highmem;
 
     create_gic(vms, sysmem);
 
@@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
 
     vms->highmem_ecam = !vmc->no_highmem_ecam;
     vms->highmem_mmio = true;
+    vms->highmem_redists = true;
 
     if (vmc->no_its) {
         vms->its = false;
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 9c54acd10d..dc9fa26faa 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -144,6 +144,7 @@ struct VirtMachineState {
     bool highmem;
     bool highmem_ecam;
     bool highmem_mmio;
+    bool highmem_redists;
     bool its;
     bool tcg_its;
     bool virt;
@@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
 
     assert(vms->gic_version == VIRT_GIC_VERSION_3);
 
-    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
+    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
+            vms->highmem_redists) ? 2 : 1;
 }
 
 #endif /* QEMU_ARM_VIRT_H */
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe region
> using highmem_ecam, let's add a control for the highmem GICv3
> redistributor region.
>
> Similarily to highmem_ecam, these redistributors are disabled when
> highmem is off.
>
> Reviewed-by: Andrew Jones <drjones@redhat.com>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 2 ++
>  hw/arm/virt.c            | 2 ++
>  include/hw/arm/virt.h    | 4 +++-
>  3 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 449fab0080..0757c28f69 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
>  
> +    vms->highmem_redists &= vms->highmem;
> +
>      acpi_add_table(table_offsets, tables_blob);
>      build_madt(tables_blob, tables->linker, vms);
>  
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ed8ea96acc..e734a75850 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
>      vms->highmem_mmio &= vms->highmem;
> +    vms->highmem_redists &= vms->highmem;
>  
>      create_gic(vms, sysmem);
>  
> @@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
>      vms->highmem_mmio = true;
> +    vms->highmem_redists = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 9c54acd10d..dc9fa26faa 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -144,6 +144,7 @@ struct VirtMachineState {
>      bool highmem;
>      bool highmem_ecam;
>      bool highmem_mmio;
> +    bool highmem_redists;
>      bool its;
>      bool tcg_its;
>      bool virt;
> @@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
>  
>      assert(vms->gic_version == VIRT_GIC_VERSION_3);
>  
> -    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
> +    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
> +            vms->highmem_redists) ? 2 : 1;
>  }
>  
>  #endif /* QEMU_ARM_VIRT_H */

Re: [PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe region
> using highmem_ecam, let's add a control for the highmem GICv3
> redistributor region.
>
> Similarily to highmem_ecam, these redistributors are disabled when
> highmem is off.
>
> Reviewed-by: Andrew Jones <drjones@redhat.com>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 2 ++
>  hw/arm/virt.c            | 2 ++
>  include/hw/arm/virt.h    | 4 +++-
>  3 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 449fab0080..0757c28f69 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
>  
> +    vms->highmem_redists &= vms->highmem;
> +
>      acpi_add_table(table_offsets, tables_blob);
>      build_madt(tables_blob, tables->linker, vms);
>  
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ed8ea96acc..e734a75850 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
>      vms->highmem_mmio &= vms->highmem;
> +    vms->highmem_redists &= vms->highmem;
>  
>      create_gic(vms, sysmem);
>  
> @@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
>      vms->highmem_mmio = true;
> +    vms->highmem_redists = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 9c54acd10d..dc9fa26faa 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -144,6 +144,7 @@ struct VirtMachineState {
>      bool highmem;
>      bool highmem_ecam;
>      bool highmem_mmio;
> +    bool highmem_redists;
>      bool its;
>      bool tcg_its;
>      bool virt;
> @@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
>  
>      assert(vms->gic_version == VIRT_GIC_VERSION_3);
>  
> -    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
> +    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
> +            vms->highmem_redists) ? 2 : 1;
>  }
>  
>  #endif /* QEMU_ARM_VIRT_H */

Re: [PATCH v5 2/6] hw/arm/virt: Add a control for the the highmem redistributors

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> Just like we can control the enablement of the highmem PCIe region
> using highmem_ecam, let's add a control for the highmem GICv3
> redistributor region.
>
> Similarily to highmem_ecam, these redistributors are disabled when
> highmem is off.
>
> Reviewed-by: Andrew Jones <drjones@redhat.com>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt-acpi-build.c | 2 ++
>  hw/arm/virt.c            | 2 ++
>  include/hw/arm/virt.h    | 4 +++-
>  3 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 449fab0080..0757c28f69 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -947,6 +947,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
>  
> +    vms->highmem_redists &= vms->highmem;
> +
>      acpi_add_table(table_offsets, tables_blob);
>      build_madt(tables_blob, tables->linker, vms);
>  
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ed8ea96acc..e734a75850 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -2106,6 +2106,7 @@ static void machvirt_init(MachineState *machine)
>      virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
>  
>      vms->highmem_mmio &= vms->highmem;
> +    vms->highmem_redists &= vms->highmem;
>  
>      create_gic(vms, sysmem);
>  
> @@ -2805,6 +2806,7 @@ static void virt_instance_init(Object *obj)
>  
>      vms->highmem_ecam = !vmc->no_highmem_ecam;
>      vms->highmem_mmio = true;
> +    vms->highmem_redists = true;
>  
>      if (vmc->no_its) {
>          vms->its = false;
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 9c54acd10d..dc9fa26faa 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -144,6 +144,7 @@ struct VirtMachineState {
>      bool highmem;
>      bool highmem_ecam;
>      bool highmem_mmio;
> +    bool highmem_redists;
>      bool its;
>      bool tcg_its;
>      bool virt;
> @@ -190,7 +191,8 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms)
>  
>      assert(vms->gic_version == VIRT_GIC_VERSION_3);
>  
> -    return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1;
> +    return (MACHINE(vms)->smp.cpus > redist0_capacity &&
> +            vms->highmem_redists) ? 2 : 1;
>  }
>  
>  #endif /* QEMU_ARM_VIRT_H */

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 3/6] hw/arm/virt: Honor highmem setting when computing the memory map

[Marc Zyngier]

Even when the VM is configured with highmem=off, the highest_gpa
field includes devices that are above the 4GiB limit.
Similarily, nothing seem to check that the memory is within
the limit set by the highmem=off option.

This leads to failures in virt_kvm_type() on systems that have
a crippled IPA range, as the reported IPA space is larger than
what it should be.

Instead, honor the user-specified limit to only use the devices
at the lowest end of the spectrum, and fail if we have memory
crossing the 4GiB limit.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index e734a75850..ecc3e3e5b0 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1663,7 +1663,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
 static void virt_set_memmap(VirtMachineState *vms)
 {
     MachineState *ms = MACHINE(vms);
-    hwaddr base, device_memory_base, device_memory_size;
+    hwaddr base, device_memory_base, device_memory_size, memtop;
     int i;
 
     vms->memmap = extended_memmap;
@@ -1690,7 +1690,11 @@ static void virt_set_memmap(VirtMachineState *vms)
     device_memory_size = ms->maxram_size - ms->ram_size + ms->ram_slots * GiB;
 
     /* Base address of the high IO region */
-    base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    if (!vms->highmem && memtop > 4 * GiB) {
+        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+        exit(EXIT_FAILURE);
+    }
     if (base < device_memory_base) {
         error_report("maxmem/slots too huge");
         exit(EXIT_FAILURE);
@@ -1707,7 +1711,7 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = base - 1;
+    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

[PATCH v5 3/6] hw/arm/virt: Honor highmem setting when computing the memory map

[Marc Zyngier]

Even when the VM is configured with highmem=off, the highest_gpa
field includes devices that are above the 4GiB limit.
Similarily, nothing seem to check that the memory is within
the limit set by the highmem=off option.

This leads to failures in virt_kvm_type() on systems that have
a crippled IPA range, as the reported IPA space is larger than
what it should be.

Instead, honor the user-specified limit to only use the devices
at the lowest end of the spectrum, and fail if we have memory
crossing the 4GiB limit.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index e734a75850..ecc3e3e5b0 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1663,7 +1663,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
 static void virt_set_memmap(VirtMachineState *vms)
 {
     MachineState *ms = MACHINE(vms);
-    hwaddr base, device_memory_base, device_memory_size;
+    hwaddr base, device_memory_base, device_memory_size, memtop;
     int i;
 
     vms->memmap = extended_memmap;
@@ -1690,7 +1690,11 @@ static void virt_set_memmap(VirtMachineState *vms)
     device_memory_size = ms->maxram_size - ms->ram_size + ms->ram_slots * GiB;
 
     /* Base address of the high IO region */
-    base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    if (!vms->highmem && memtop > 4 * GiB) {
+        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+        exit(EXIT_FAILURE);
+    }
     if (base < device_memory_base) {
         error_report("maxmem/slots too huge");
         exit(EXIT_FAILURE);
@@ -1707,7 +1711,7 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = base - 1;
+    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

[PATCH v5 3/6] hw/arm/virt: Honor highmem setting when computing the memory map

[Marc Zyngier]

Even when the VM is configured with highmem=off, the highest_gpa
field includes devices that are above the 4GiB limit.
Similarily, nothing seem to check that the memory is within
the limit set by the highmem=off option.

This leads to failures in virt_kvm_type() on systems that have
a crippled IPA range, as the reported IPA space is larger than
what it should be.

Instead, honor the user-specified limit to only use the devices
at the lowest end of the spectrum, and fail if we have memory
crossing the 4GiB limit.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index e734a75850..ecc3e3e5b0 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1663,7 +1663,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
 static void virt_set_memmap(VirtMachineState *vms)
 {
     MachineState *ms = MACHINE(vms);
-    hwaddr base, device_memory_base, device_memory_size;
+    hwaddr base, device_memory_base, device_memory_size, memtop;
     int i;
 
     vms->memmap = extended_memmap;
@@ -1690,7 +1690,11 @@ static void virt_set_memmap(VirtMachineState *vms)
     device_memory_size = ms->maxram_size - ms->ram_size + ms->ram_slots * GiB;
 
     /* Base address of the high IO region */
-    base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
+    if (!vms->highmem && memtop > 4 * GiB) {
+        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+        exit(EXIT_FAILURE);
+    }
     if (base < device_memory_base) {
         error_report("maxmem/slots too huge");
         exit(EXIT_FAILURE);
@@ -1707,7 +1711,7 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = base - 1;
+    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Marc Zyngier]

The highmem attribute is nothing but another way to express the
PA range of a VM. To support HW that has a smaller PA range then
what QEMU assumes, pass this PA range to the virt_set_memmap()
function, allowing it to correctly exclude highmem devices
if they are outside of the PA range.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 12 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ecc3e3e5b0..a427676b50 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
     return arm_cpu_mp_affinity(idx, clustersz);
 }
 
-static void virt_set_memmap(VirtMachineState *vms)
+static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
 {
     MachineState *ms = MACHINE(vms);
     hwaddr base, device_memory_base, device_memory_size, memtop;
@@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
         exit(EXIT_FAILURE);
     }
 
+    /*
+     * !highmem is exactly the same as limiting the PA space to 32bit,
+     * irrespective of the underlying capabilities of the HW.
+     */
+    if (!vms->highmem) {
+        pa_bits = 32;
+    }
+
     /*
      * We compute the base of the high IO region depending on the
      * amount of initial and device memory. The device memory start/size
@@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
 
     /* Base address of the high IO region */
     memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
-    if (!vms->highmem && memtop > 4 * GiB) {
-        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+    if (memtop > BIT_ULL(pa_bits)) {
+	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
+			 pa_bits, memtop - BIT_ULL(pa_bits));
         exit(EXIT_FAILURE);
     }
     if (base < device_memory_base) {
@@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
+
+    /*
+     * If base fits within pa_bits, all good. If it doesn't, limit it
+     * to the end of RAM, which is guaranteed to fit within pa_bits.
+     */
+    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
+
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
@@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
     unsigned int smp_cpus = machine->smp.cpus;
     unsigned int max_cpus = machine->smp.max_cpus;
 
+    if (!cpu_type_valid(machine->cpu_type)) {
+        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
+        exit(1);
+    }
+
+    possible_cpus = mc->possible_cpu_arch_ids(machine);
+
     /*
      * In accelerated mode, the memory map is computed earlier in kvm_type()
      * to create a VM with the right number of IPA bits.
      */
     if (!vms->memmap) {
-        virt_set_memmap(vms);
+        Object *cpuobj;
+        ARMCPU *armcpu;
+        int pa_bits;
+
+        /*
+         * Instanciate a temporary CPU object to find out about what
+         * we are about to deal with. Once this is done, get rid of
+         * the object.
+         */
+        cpuobj = object_new(possible_cpus->cpus[0].type);
+        armcpu = ARM_CPU(cpuobj);
+
+        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
+            pa_bits = arm_pamax(armcpu);
+        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
+            /* v7 with LPAE */
+            pa_bits = 40;
+        } else {
+            /* Anything else */
+            pa_bits = 32;
+        }
+
+        object_unref(cpuobj);
+
+        virt_set_memmap(vms, pa_bits);
     }
 
     /* We can probe only here because during property set
@@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
      */
     finalize_gic_version(vms);
 
-    if (!cpu_type_valid(machine->cpu_type)) {
-        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
-        exit(1);
-    }
-
     if (vms->secure) {
         /*
          * The Secure view of the world is the same as the NonSecure,
@@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
 
     create_fdt(vms);
 
-    possible_cpus = mc->possible_cpu_arch_ids(machine);
     assert(possible_cpus->len == max_cpus);
     for (n = 0; n < possible_cpus->len; n++) {
         Object *cpuobj;
@@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
     max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
 
     /* we freeze the memory map to compute the highest gpa */
-    virt_set_memmap(vms);
+    virt_set_memmap(vms, max_vm_pa_size);
 
     requested_pa_size = 64 - clz64(vms->highest_gpa);
 
-- 
2.30.2

[PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Marc Zyngier]

The highmem attribute is nothing but another way to express the
PA range of a VM. To support HW that has a smaller PA range then
what QEMU assumes, pass this PA range to the virt_set_memmap()
function, allowing it to correctly exclude highmem devices
if they are outside of the PA range.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 12 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ecc3e3e5b0..a427676b50 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
     return arm_cpu_mp_affinity(idx, clustersz);
 }
 
-static void virt_set_memmap(VirtMachineState *vms)
+static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
 {
     MachineState *ms = MACHINE(vms);
     hwaddr base, device_memory_base, device_memory_size, memtop;
@@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
         exit(EXIT_FAILURE);
     }
 
+    /*
+     * !highmem is exactly the same as limiting the PA space to 32bit,
+     * irrespective of the underlying capabilities of the HW.
+     */
+    if (!vms->highmem) {
+        pa_bits = 32;
+    }
+
     /*
      * We compute the base of the high IO region depending on the
      * amount of initial and device memory. The device memory start/size
@@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
 
     /* Base address of the high IO region */
     memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
-    if (!vms->highmem && memtop > 4 * GiB) {
-        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+    if (memtop > BIT_ULL(pa_bits)) {
+	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
+			 pa_bits, memtop - BIT_ULL(pa_bits));
         exit(EXIT_FAILURE);
     }
     if (base < device_memory_base) {
@@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
+
+    /*
+     * If base fits within pa_bits, all good. If it doesn't, limit it
+     * to the end of RAM, which is guaranteed to fit within pa_bits.
+     */
+    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
+
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
@@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
     unsigned int smp_cpus = machine->smp.cpus;
     unsigned int max_cpus = machine->smp.max_cpus;
 
+    if (!cpu_type_valid(machine->cpu_type)) {
+        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
+        exit(1);
+    }
+
+    possible_cpus = mc->possible_cpu_arch_ids(machine);
+
     /*
      * In accelerated mode, the memory map is computed earlier in kvm_type()
      * to create a VM with the right number of IPA bits.
      */
     if (!vms->memmap) {
-        virt_set_memmap(vms);
+        Object *cpuobj;
+        ARMCPU *armcpu;
+        int pa_bits;
+
+        /*
+         * Instanciate a temporary CPU object to find out about what
+         * we are about to deal with. Once this is done, get rid of
+         * the object.
+         */
+        cpuobj = object_new(possible_cpus->cpus[0].type);
+        armcpu = ARM_CPU(cpuobj);
+
+        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
+            pa_bits = arm_pamax(armcpu);
+        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
+            /* v7 with LPAE */
+            pa_bits = 40;
+        } else {
+            /* Anything else */
+            pa_bits = 32;
+        }
+
+        object_unref(cpuobj);
+
+        virt_set_memmap(vms, pa_bits);
     }
 
     /* We can probe only here because during property set
@@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
      */
     finalize_gic_version(vms);
 
-    if (!cpu_type_valid(machine->cpu_type)) {
-        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
-        exit(1);
-    }
-
     if (vms->secure) {
         /*
          * The Secure view of the world is the same as the NonSecure,
@@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
 
     create_fdt(vms);
 
-    possible_cpus = mc->possible_cpu_arch_ids(machine);
     assert(possible_cpus->len == max_cpus);
     for (n = 0; n < possible_cpus->len; n++) {
         Object *cpuobj;
@@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
     max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
 
     /* we freeze the memory map to compute the highest gpa */
-    virt_set_memmap(vms);
+    virt_set_memmap(vms, max_vm_pa_size);
 
     requested_pa_size = 64 - clz64(vms->highest_gpa);
 
-- 
2.30.2

[PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Marc Zyngier]

The highmem attribute is nothing but another way to express the
PA range of a VM. To support HW that has a smaller PA range then
what QEMU assumes, pass this PA range to the virt_set_memmap()
function, allowing it to correctly exclude highmem devices
if they are outside of the PA range.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 12 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ecc3e3e5b0..a427676b50 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
     return arm_cpu_mp_affinity(idx, clustersz);
 }
 
-static void virt_set_memmap(VirtMachineState *vms)
+static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
 {
     MachineState *ms = MACHINE(vms);
     hwaddr base, device_memory_base, device_memory_size, memtop;
@@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
         exit(EXIT_FAILURE);
     }
 
+    /*
+     * !highmem is exactly the same as limiting the PA space to 32bit,
+     * irrespective of the underlying capabilities of the HW.
+     */
+    if (!vms->highmem) {
+        pa_bits = 32;
+    }
+
     /*
      * We compute the base of the high IO region depending on the
      * amount of initial and device memory. The device memory start/size
@@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
 
     /* Base address of the high IO region */
     memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
-    if (!vms->highmem && memtop > 4 * GiB) {
-        error_report("highmem=off, but memory crosses the 4GiB limit\n");
+    if (memtop > BIT_ULL(pa_bits)) {
+	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
+			 pa_bits, memtop - BIT_ULL(pa_bits));
         exit(EXIT_FAILURE);
     }
     if (base < device_memory_base) {
@@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
         vms->memmap[i].size = size;
         base += size;
     }
-    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
+
+    /*
+     * If base fits within pa_bits, all good. If it doesn't, limit it
+     * to the end of RAM, which is guaranteed to fit within pa_bits.
+     */
+    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
+
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
@@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
     unsigned int smp_cpus = machine->smp.cpus;
     unsigned int max_cpus = machine->smp.max_cpus;
 
+    if (!cpu_type_valid(machine->cpu_type)) {
+        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
+        exit(1);
+    }
+
+    possible_cpus = mc->possible_cpu_arch_ids(machine);
+
     /*
      * In accelerated mode, the memory map is computed earlier in kvm_type()
      * to create a VM with the right number of IPA bits.
      */
     if (!vms->memmap) {
-        virt_set_memmap(vms);
+        Object *cpuobj;
+        ARMCPU *armcpu;
+        int pa_bits;
+
+        /*
+         * Instanciate a temporary CPU object to find out about what
+         * we are about to deal with. Once this is done, get rid of
+         * the object.
+         */
+        cpuobj = object_new(possible_cpus->cpus[0].type);
+        armcpu = ARM_CPU(cpuobj);
+
+        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
+            pa_bits = arm_pamax(armcpu);
+        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
+            /* v7 with LPAE */
+            pa_bits = 40;
+        } else {
+            /* Anything else */
+            pa_bits = 32;
+        }
+
+        object_unref(cpuobj);
+
+        virt_set_memmap(vms, pa_bits);
     }
 
     /* We can probe only here because during property set
@@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
      */
     finalize_gic_version(vms);
 
-    if (!cpu_type_valid(machine->cpu_type)) {
-        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
-        exit(1);
-    }
-
     if (vms->secure) {
         /*
          * The Secure view of the world is the same as the NonSecure,
@@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
 
     create_fdt(vms);
 
-    possible_cpus = mc->possible_cpu_arch_ids(machine);
     assert(possible_cpus->len == max_cpus);
     for (n = 0; n < possible_cpus->len; n++) {
         Object *cpuobj;
@@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
     max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
 
     /* we freeze the memory map to compute the highest gpa */
-    virt_set_memmap(vms);
+    virt_set_memmap(vms, max_vm_pa_size);
 
     requested_pa_size = 64 - clz64(vms->highest_gpa);
 
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Eric Auger]

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> The highmem attribute is nothing but another way to express the
> PA range of a VM. To support HW that has a smaller PA range then
> what QEMU assumes, pass this PA range to the virt_set_memmap()
> function, allowing it to correctly exclude highmem devices
> if they are outside of the PA range.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks

Eric
> ---
>  hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 52 insertions(+), 12 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ecc3e3e5b0..a427676b50 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
>      return arm_cpu_mp_affinity(idx, clustersz);
>  }
>  
> -static void virt_set_memmap(VirtMachineState *vms)
> +static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>  {
>      MachineState *ms = MACHINE(vms);
>      hwaddr base, device_memory_base, device_memory_size, memtop;
> @@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
>          exit(EXIT_FAILURE);
>      }
>  
> +    /*
> +     * !highmem is exactly the same as limiting the PA space to 32bit,
> +     * irrespective of the underlying capabilities of the HW.
> +     */
> +    if (!vms->highmem) {
> +        pa_bits = 32;
> +    }
> +
>      /*
>       * We compute the base of the high IO region depending on the
>       * amount of initial and device memory. The device memory start/size
> @@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
>  
>      /* Base address of the high IO region */
>      memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
> -    if (!vms->highmem && memtop > 4 * GiB) {
> -        error_report("highmem=off, but memory crosses the 4GiB limit\n");
> +    if (memtop > BIT_ULL(pa_bits)) {
> +	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
> +			 pa_bits, memtop - BIT_ULL(pa_bits));
>          exit(EXIT_FAILURE);
>      }
>      if (base < device_memory_base) {
> @@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
>          vms->memmap[i].size = size;
>          base += size;
>      }
> -    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
> +
> +    /*
> +     * If base fits within pa_bits, all good. If it doesn't, limit it
> +     * to the end of RAM, which is guaranteed to fit within pa_bits.
> +     */
> +    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> +
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;
> @@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
>      unsigned int smp_cpus = machine->smp.cpus;
>      unsigned int max_cpus = machine->smp.max_cpus;
>  
> +    if (!cpu_type_valid(machine->cpu_type)) {
> +        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> +        exit(1);
> +    }
> +
> +    possible_cpus = mc->possible_cpu_arch_ids(machine);
> +
>      /*
>       * In accelerated mode, the memory map is computed earlier in kvm_type()
>       * to create a VM with the right number of IPA bits.
>       */
>      if (!vms->memmap) {
> -        virt_set_memmap(vms);
> +        Object *cpuobj;
> +        ARMCPU *armcpu;
> +        int pa_bits;
> +
> +        /*
> +         * Instanciate a temporary CPU object to find out about what
> +         * we are about to deal with. Once this is done, get rid of
> +         * the object.
> +         */
> +        cpuobj = object_new(possible_cpus->cpus[0].type);
> +        armcpu = ARM_CPU(cpuobj);
> +
> +        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
> +            pa_bits = arm_pamax(armcpu);
> +        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
> +            /* v7 with LPAE */
> +            pa_bits = 40;
> +        } else {
> +            /* Anything else */
> +            pa_bits = 32;
> +        }
> +
> +        object_unref(cpuobj);
> +
> +        virt_set_memmap(vms, pa_bits);
>      }
>  
>      /* We can probe only here because during property set
> @@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
>       */
>      finalize_gic_version(vms);
>  
> -    if (!cpu_type_valid(machine->cpu_type)) {
> -        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> -        exit(1);
> -    }
> -
>      if (vms->secure) {
>          /*
>           * The Secure view of the world is the same as the NonSecure,
> @@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
>  
>      create_fdt(vms);
>  
> -    possible_cpus = mc->possible_cpu_arch_ids(machine);
>      assert(possible_cpus->len == max_cpus);
>      for (n = 0; n < possible_cpus->len; n++) {
>          Object *cpuobj;
> @@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
>      max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
>  
>      /* we freeze the memory map to compute the highest gpa */
> -    virt_set_memmap(vms);
> +    virt_set_memmap(vms, max_vm_pa_size);
>  
>      requested_pa_size = 64 - clz64(vms->highest_gpa);
>  

Re: [PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Eric Auger]

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> The highmem attribute is nothing but another way to express the
> PA range of a VM. To support HW that has a smaller PA range then
> what QEMU assumes, pass this PA range to the virt_set_memmap()
> function, allowing it to correctly exclude highmem devices
> if they are outside of the PA range.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks

Eric
> ---
>  hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 52 insertions(+), 12 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ecc3e3e5b0..a427676b50 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
>      return arm_cpu_mp_affinity(idx, clustersz);
>  }
>  
> -static void virt_set_memmap(VirtMachineState *vms)
> +static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>  {
>      MachineState *ms = MACHINE(vms);
>      hwaddr base, device_memory_base, device_memory_size, memtop;
> @@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
>          exit(EXIT_FAILURE);
>      }
>  
> +    /*
> +     * !highmem is exactly the same as limiting the PA space to 32bit,
> +     * irrespective of the underlying capabilities of the HW.
> +     */
> +    if (!vms->highmem) {
> +        pa_bits = 32;
> +    }
> +
>      /*
>       * We compute the base of the high IO region depending on the
>       * amount of initial and device memory. The device memory start/size
> @@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
>  
>      /* Base address of the high IO region */
>      memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
> -    if (!vms->highmem && memtop > 4 * GiB) {
> -        error_report("highmem=off, but memory crosses the 4GiB limit\n");
> +    if (memtop > BIT_ULL(pa_bits)) {
> +	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
> +			 pa_bits, memtop - BIT_ULL(pa_bits));
>          exit(EXIT_FAILURE);
>      }
>      if (base < device_memory_base) {
> @@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
>          vms->memmap[i].size = size;
>          base += size;
>      }
> -    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
> +
> +    /*
> +     * If base fits within pa_bits, all good. If it doesn't, limit it
> +     * to the end of RAM, which is guaranteed to fit within pa_bits.
> +     */
> +    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> +
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;
> @@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
>      unsigned int smp_cpus = machine->smp.cpus;
>      unsigned int max_cpus = machine->smp.max_cpus;
>  
> +    if (!cpu_type_valid(machine->cpu_type)) {
> +        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> +        exit(1);
> +    }
> +
> +    possible_cpus = mc->possible_cpu_arch_ids(machine);
> +
>      /*
>       * In accelerated mode, the memory map is computed earlier in kvm_type()
>       * to create a VM with the right number of IPA bits.
>       */
>      if (!vms->memmap) {
> -        virt_set_memmap(vms);
> +        Object *cpuobj;
> +        ARMCPU *armcpu;
> +        int pa_bits;
> +
> +        /*
> +         * Instanciate a temporary CPU object to find out about what
> +         * we are about to deal with. Once this is done, get rid of
> +         * the object.
> +         */
> +        cpuobj = object_new(possible_cpus->cpus[0].type);
> +        armcpu = ARM_CPU(cpuobj);
> +
> +        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
> +            pa_bits = arm_pamax(armcpu);
> +        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
> +            /* v7 with LPAE */
> +            pa_bits = 40;
> +        } else {
> +            /* Anything else */
> +            pa_bits = 32;
> +        }
> +
> +        object_unref(cpuobj);
> +
> +        virt_set_memmap(vms, pa_bits);
>      }
>  
>      /* We can probe only here because during property set
> @@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
>       */
>      finalize_gic_version(vms);
>  
> -    if (!cpu_type_valid(machine->cpu_type)) {
> -        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> -        exit(1);
> -    }
> -
>      if (vms->secure) {
>          /*
>           * The Secure view of the world is the same as the NonSecure,
> @@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
>  
>      create_fdt(vms);
>  
> -    possible_cpus = mc->possible_cpu_arch_ids(machine);
>      assert(possible_cpus->len == max_cpus);
>      for (n = 0; n < possible_cpus->len; n++) {
>          Object *cpuobj;
> @@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
>      max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
>  
>      /* we freeze the memory map to compute the highest gpa */
> -    virt_set_memmap(vms);
> +    virt_set_memmap(vms, max_vm_pa_size);
>  
>      requested_pa_size = 64 - clz64(vms->highest_gpa);
>  

Re: [PATCH v5 4/6] hw/arm/virt: Use the PA range to compute the memory map

[Eric Auger]

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> The highmem attribute is nothing but another way to express the
> PA range of a VM. To support HW that has a smaller PA range then
> what QEMU assumes, pass this PA range to the virt_set_memmap()
> function, allowing it to correctly exclude highmem devices
> if they are outside of the PA range.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks

Eric
> ---
>  hw/arm/virt.c | 64 +++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 52 insertions(+), 12 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index ecc3e3e5b0..a427676b50 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1660,7 +1660,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
>      return arm_cpu_mp_affinity(idx, clustersz);
>  }
>  
> -static void virt_set_memmap(VirtMachineState *vms)
> +static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>  {
>      MachineState *ms = MACHINE(vms);
>      hwaddr base, device_memory_base, device_memory_size, memtop;
> @@ -1678,6 +1678,14 @@ static void virt_set_memmap(VirtMachineState *vms)
>          exit(EXIT_FAILURE);
>      }
>  
> +    /*
> +     * !highmem is exactly the same as limiting the PA space to 32bit,
> +     * irrespective of the underlying capabilities of the HW.
> +     */
> +    if (!vms->highmem) {
> +        pa_bits = 32;
> +    }
> +
>      /*
>       * We compute the base of the high IO region depending on the
>       * amount of initial and device memory. The device memory start/size
> @@ -1691,8 +1699,9 @@ static void virt_set_memmap(VirtMachineState *vms)
>  
>      /* Base address of the high IO region */
>      memtop = base = device_memory_base + ROUND_UP(device_memory_size, GiB);
> -    if (!vms->highmem && memtop > 4 * GiB) {
> -        error_report("highmem=off, but memory crosses the 4GiB limit\n");
> +    if (memtop > BIT_ULL(pa_bits)) {
> +	    error_report("Addressing limited to %d bits, but memory exceeds it by %llu bytes\n",
> +			 pa_bits, memtop - BIT_ULL(pa_bits));
>          exit(EXIT_FAILURE);
>      }
>      if (base < device_memory_base) {
> @@ -1711,7 +1720,13 @@ static void virt_set_memmap(VirtMachineState *vms)
>          vms->memmap[i].size = size;
>          base += size;
>      }
> -    vms->highest_gpa = (vms->highmem ? base : memtop) - 1;
> +
> +    /*
> +     * If base fits within pa_bits, all good. If it doesn't, limit it
> +     * to the end of RAM, which is guaranteed to fit within pa_bits.
> +     */
> +    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> +
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;
> @@ -1902,12 +1917,43 @@ static void machvirt_init(MachineState *machine)
>      unsigned int smp_cpus = machine->smp.cpus;
>      unsigned int max_cpus = machine->smp.max_cpus;
>  
> +    if (!cpu_type_valid(machine->cpu_type)) {
> +        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> +        exit(1);
> +    }
> +
> +    possible_cpus = mc->possible_cpu_arch_ids(machine);
> +
>      /*
>       * In accelerated mode, the memory map is computed earlier in kvm_type()
>       * to create a VM with the right number of IPA bits.
>       */
>      if (!vms->memmap) {
> -        virt_set_memmap(vms);
> +        Object *cpuobj;
> +        ARMCPU *armcpu;
> +        int pa_bits;
> +
> +        /*
> +         * Instanciate a temporary CPU object to find out about what
> +         * we are about to deal with. Once this is done, get rid of
> +         * the object.
> +         */
> +        cpuobj = object_new(possible_cpus->cpus[0].type);
> +        armcpu = ARM_CPU(cpuobj);
> +
> +        if (object_property_get_bool(cpuobj, "aarch64", NULL)) {
> +            pa_bits = arm_pamax(armcpu);
> +        } else if (arm_feature(&armcpu->env, ARM_FEATURE_LPAE)) {
> +            /* v7 with LPAE */
> +            pa_bits = 40;
> +        } else {
> +            /* Anything else */
> +            pa_bits = 32;
> +        }
> +
> +        object_unref(cpuobj);
> +
> +        virt_set_memmap(vms, pa_bits);
>      }
>  
>      /* We can probe only here because during property set
> @@ -1915,11 +1961,6 @@ static void machvirt_init(MachineState *machine)
>       */
>      finalize_gic_version(vms);
>  
> -    if (!cpu_type_valid(machine->cpu_type)) {
> -        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
> -        exit(1);
> -    }
> -
>      if (vms->secure) {
>          /*
>           * The Secure view of the world is the same as the NonSecure,
> @@ -1989,7 +2030,6 @@ static void machvirt_init(MachineState *machine)
>  
>      create_fdt(vms);
>  
> -    possible_cpus = mc->possible_cpu_arch_ids(machine);
>      assert(possible_cpus->len == max_cpus);
>      for (n = 0; n < possible_cpus->len; n++) {
>          Object *cpuobj;
> @@ -2646,7 +2686,7 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)
>      max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms, &fixed_ipa);
>  
>      /* we freeze the memory map to compute the highest gpa */
> -    virt_set_memmap(vms);
> +    virt_set_memmap(vms, max_vm_pa_size);
>  
>      requested_pa_size = 64 - clz64(vms->highest_gpa);
>  

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Marc Zyngier]

In order to only keep the highmem devices that actually fit in
the PA range, check their location against the range and update
highest_gpa if they fit. If they don't, mark them as disabled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index a427676b50..053791cc44 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
         base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
     }
 
+    /* We know for sure that at least the memory fits in the PA space */
+    vms->highest_gpa = memtop - 1;
+
     for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
         hwaddr size = extended_memmap[i].size;
+        bool fits;
 
         base = ROUND_UP(base, size);
         vms->memmap[i].base = base;
         vms->memmap[i].size = size;
+
+        /*
+         * Check each device to see if they fit in the PA space,
+         * moving highest_gpa as we go.
+         *
+         * For each device that doesn't fit, disable it.
+         */
+        fits = (base + size) <= BIT_ULL(pa_bits);
+        if (fits) {
+            vms->highest_gpa = base + size - 1;
+        }
+
+        switch (i) {
+        case VIRT_HIGH_GIC_REDIST2:
+            vms->highmem_redists &= fits;
+            break;
+        case VIRT_HIGH_PCIE_ECAM:
+            vms->highmem_ecam &= fits;
+            break;
+        case VIRT_HIGH_PCIE_MMIO:
+            vms->highmem_mmio &= fits;
+            break;
+        }
+
         base += size;
     }
 
-    /*
-     * If base fits within pa_bits, all good. If it doesn't, limit it
-     * to the end of RAM, which is guaranteed to fit within pa_bits.
-     */
-    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
-
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

[PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Marc Zyngier]

In order to only keep the highmem devices that actually fit in
the PA range, check their location against the range and update
highest_gpa if they fit. If they don't, mark them as disabled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index a427676b50..053791cc44 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
         base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
     }
 
+    /* We know for sure that at least the memory fits in the PA space */
+    vms->highest_gpa = memtop - 1;
+
     for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
         hwaddr size = extended_memmap[i].size;
+        bool fits;
 
         base = ROUND_UP(base, size);
         vms->memmap[i].base = base;
         vms->memmap[i].size = size;
+
+        /*
+         * Check each device to see if they fit in the PA space,
+         * moving highest_gpa as we go.
+         *
+         * For each device that doesn't fit, disable it.
+         */
+        fits = (base + size) <= BIT_ULL(pa_bits);
+        if (fits) {
+            vms->highest_gpa = base + size - 1;
+        }
+
+        switch (i) {
+        case VIRT_HIGH_GIC_REDIST2:
+            vms->highmem_redists &= fits;
+            break;
+        case VIRT_HIGH_PCIE_ECAM:
+            vms->highmem_ecam &= fits;
+            break;
+        case VIRT_HIGH_PCIE_MMIO:
+            vms->highmem_mmio &= fits;
+            break;
+        }
+
         base += size;
     }
 
-    /*
-     * If base fits within pa_bits, all good. If it doesn't, limit it
-     * to the end of RAM, which is guaranteed to fit within pa_bits.
-     */
-    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
-
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

[PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Marc Zyngier]

In order to only keep the highmem devices that actually fit in
the PA range, check their location against the range and update
highest_gpa if they fit. If they don't, mark them as disabled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index a427676b50..053791cc44 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
         base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
     }
 
+    /* We know for sure that at least the memory fits in the PA space */
+    vms->highest_gpa = memtop - 1;
+
     for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
         hwaddr size = extended_memmap[i].size;
+        bool fits;
 
         base = ROUND_UP(base, size);
         vms->memmap[i].base = base;
         vms->memmap[i].size = size;
+
+        /*
+         * Check each device to see if they fit in the PA space,
+         * moving highest_gpa as we go.
+         *
+         * For each device that doesn't fit, disable it.
+         */
+        fits = (base + size) <= BIT_ULL(pa_bits);
+        if (fits) {
+            vms->highest_gpa = base + size - 1;
+        }
+
+        switch (i) {
+        case VIRT_HIGH_GIC_REDIST2:
+            vms->highmem_redists &= fits;
+            break;
+        case VIRT_HIGH_PCIE_ECAM:
+            vms->highmem_ecam &= fits;
+            break;
+        case VIRT_HIGH_PCIE_MMIO:
+            vms->highmem_mmio &= fits;
+            break;
+        }
+
         base += size;
     }
 
-    /*
-     * If base fits within pa_bits, all good. If it doesn't, limit it
-     * to the end of RAM, which is guaranteed to fit within pa_bits.
-     */
-    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
-
     if (device_memory_size > 0) {
         ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
         ms->device_memory->base = device_memory_base;
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> In order to only keep the highmem devices that actually fit in
> the PA range, check their location against the range and update
> highest_gpa if they fit. If they don't, mark them as disabled.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
>  1 file changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index a427676b50..053791cc44 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>          base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
>      }
>  
> +    /* We know for sure that at least the memory fits in the PA space */
> +    vms->highest_gpa = memtop - 1;
> +
>      for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
>          hwaddr size = extended_memmap[i].size;
> +        bool fits;
>  
>          base = ROUND_UP(base, size);
>          vms->memmap[i].base = base;
>          vms->memmap[i].size = size;
> +
> +        /*
> +         * Check each device to see if they fit in the PA space,
> +         * moving highest_gpa as we go.
> +         *
> +         * For each device that doesn't fit, disable it.
> +         */
> +        fits = (base + size) <= BIT_ULL(pa_bits);
> +        if (fits) {
> +            vms->highest_gpa = base + size - 1;
> +        }
> +
> +        switch (i) {
> +        case VIRT_HIGH_GIC_REDIST2:
> +            vms->highmem_redists &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_ECAM:
> +            vms->highmem_ecam &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_MMIO:
> +            vms->highmem_mmio &= fits;
> +            break;
> +        }
> +
>          base += size;
>      }
>  
> -    /*
> -     * If base fits within pa_bits, all good. If it doesn't, limit it
> -     * to the end of RAM, which is guaranteed to fit within pa_bits.
> -     */
> -    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> -
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;

Re: [PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> In order to only keep the highmem devices that actually fit in
> the PA range, check their location against the range and update
> highest_gpa if they fit. If they don't, mark them as disabled.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
>  1 file changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index a427676b50..053791cc44 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>          base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
>      }
>  
> +    /* We know for sure that at least the memory fits in the PA space */
> +    vms->highest_gpa = memtop - 1;
> +
>      for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
>          hwaddr size = extended_memmap[i].size;
> +        bool fits;
>  
>          base = ROUND_UP(base, size);
>          vms->memmap[i].base = base;
>          vms->memmap[i].size = size;
> +
> +        /*
> +         * Check each device to see if they fit in the PA space,
> +         * moving highest_gpa as we go.
> +         *
> +         * For each device that doesn't fit, disable it.
> +         */
> +        fits = (base + size) <= BIT_ULL(pa_bits);
> +        if (fits) {
> +            vms->highest_gpa = base + size - 1;
> +        }
> +
> +        switch (i) {
> +        case VIRT_HIGH_GIC_REDIST2:
> +            vms->highmem_redists &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_ECAM:
> +            vms->highmem_ecam &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_MMIO:
> +            vms->highmem_mmio &= fits;
> +            break;
> +        }
> +
>          base += size;
>      }
>  
> -    /*
> -     * If base fits within pa_bits, all good. If it doesn't, limit it
> -     * to the end of RAM, which is guaranteed to fit within pa_bits.
> -     */
> -    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> -
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;

Re: [PATCH v5 5/6] hw/arm/virt: Disable highmem devices that don't fit in the PA range

[Eric Auger]

Hi Marc,

On 1/14/22 3:07 PM, Marc Zyngier wrote:
> In order to only keep the highmem devices that actually fit in
> the PA range, check their location against the range and update
> highest_gpa if they fit. If they don't, mark them as disabled.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
> ---
>  hw/arm/virt.c | 34 ++++++++++++++++++++++++++++------
>  1 file changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index a427676b50..053791cc44 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1712,21 +1712,43 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
>          base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
>      }
>  
> +    /* We know for sure that at least the memory fits in the PA space */
> +    vms->highest_gpa = memtop - 1;
> +
>      for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
>          hwaddr size = extended_memmap[i].size;
> +        bool fits;
>  
>          base = ROUND_UP(base, size);
>          vms->memmap[i].base = base;
>          vms->memmap[i].size = size;
> +
> +        /*
> +         * Check each device to see if they fit in the PA space,
> +         * moving highest_gpa as we go.
> +         *
> +         * For each device that doesn't fit, disable it.
> +         */
> +        fits = (base + size) <= BIT_ULL(pa_bits);
> +        if (fits) {
> +            vms->highest_gpa = base + size - 1;
> +        }
> +
> +        switch (i) {
> +        case VIRT_HIGH_GIC_REDIST2:
> +            vms->highmem_redists &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_ECAM:
> +            vms->highmem_ecam &= fits;
> +            break;
> +        case VIRT_HIGH_PCIE_MMIO:
> +            vms->highmem_mmio &= fits;
> +            break;
> +        }
> +
>          base += size;
>      }
>  
> -    /*
> -     * If base fits within pa_bits, all good. If it doesn't, limit it
> -     * to the end of RAM, which is guaranteed to fit within pa_bits.
> -     */
> -    vms->highest_gpa = (base <= BIT_ULL(pa_bits) ? base : memtop) - 1;
> -
>      if (device_memory_size > 0) {
>          ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
>          ms->device_memory->base = device_memory_base;

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v5 6/6] hw/arm/virt: Drop superfluous checks against highmem

[Marc Zyngier]

Now that the devices present in the extended memory map are checked
against the available PA space and disabled when they don't fit,
there is no need to keep the same checks against highmem, as
highmem really is a shortcut for the PA space being 32bit.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 --
 hw/arm/virt.c            | 5 +----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 0757c28f69..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,8 +947,6 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
-    vms->highmem_redists &= vms->highmem;
-
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 053791cc44..4524f3807d 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2171,9 +2171,6 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
-    vms->highmem_mmio &= vms->highmem;
-    vms->highmem_redists &= vms->highmem;
-
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2192,7 +2189,7 @@ static void machvirt_init(MachineState *machine)
                        machine->ram_size, "mach-virt.tag");
     }
 
-    vms->highmem_ecam &= vms->highmem && (!firmware_loaded || aarch64);
+    vms->highmem_ecam &= (!firmware_loaded || aarch64);
 
     create_rtc(vms);
 
-- 
2.30.2

[PATCH v5 6/6] hw/arm/virt: Drop superfluous checks against highmem

[Marc Zyngier]

Now that the devices present in the extended memory map are checked
against the available PA space and disabled when they don't fit,
there is no need to keep the same checks against highmem, as
highmem really is a shortcut for the PA space being 32bit.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 --
 hw/arm/virt.c            | 5 +----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 0757c28f69..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,8 +947,6 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
-    vms->highmem_redists &= vms->highmem;
-
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 053791cc44..4524f3807d 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2171,9 +2171,6 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
-    vms->highmem_mmio &= vms->highmem;
-    vms->highmem_redists &= vms->highmem;
-
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2192,7 +2189,7 @@ static void machvirt_init(MachineState *machine)
                        machine->ram_size, "mach-virt.tag");
     }
 
-    vms->highmem_ecam &= vms->highmem && (!firmware_loaded || aarch64);
+    vms->highmem_ecam &= (!firmware_loaded || aarch64);
 
     create_rtc(vms);
 
-- 
2.30.2

[PATCH v5 6/6] hw/arm/virt: Drop superfluous checks against highmem

[Marc Zyngier]

Now that the devices present in the extended memory map are checked
against the available PA space and disabled when they don't fit,
there is no need to keep the same checks against highmem, as
highmem really is a shortcut for the PA space being 32bit.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 hw/arm/virt-acpi-build.c | 2 --
 hw/arm/virt.c            | 5 +----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 0757c28f69..449fab0080 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -947,8 +947,6 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
 
-    vms->highmem_redists &= vms->highmem;
-
     acpi_add_table(table_offsets, tables_blob);
     build_madt(tables_blob, tables->linker, vms);
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 053791cc44..4524f3807d 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2171,9 +2171,6 @@ static void machvirt_init(MachineState *machine)
 
     virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
 
-    vms->highmem_mmio &= vms->highmem;
-    vms->highmem_redists &= vms->highmem;
-
     create_gic(vms, sysmem);
 
     virt_cpu_post_init(vms, sysmem);
@@ -2192,7 +2189,7 @@ static void machvirt_init(MachineState *machine)
                        machine->ram_size, "mach-virt.tag");
     }
 
-    vms->highmem_ecam &= vms->highmem && (!firmware_loaded || aarch64);
+    vms->highmem_ecam &= (!firmware_loaded || aarch64);
 
     create_rtc(vms);
 
-- 
2.30.2

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Peter Maydell]

On Fri, 14 Jan 2022 at 14:08, Marc Zyngier <maz@kernel.org> wrote:
>
> Here's yet another stab at enabling QEMU on systems with
> pathologically reduced IPA ranges such as the Apple M1 (previous
> version at [1]). Eventually, we're able to run a KVM guest with more
> than just 3GB of RAM on a system with a 36bit IPA space, and at most
> 123 vCPUs.
>
> This also addresses some pathological QEMU behaviours, where the
> highmem property is used as a flag allowing exposure of devices that
> can't possibly fit in the PA space of the VM, resulting in a guest
> failure.
>
> In the end, we generalise the notion of PA space when exposing
> individual devices in the expanded memory map, and treat highmem as
> another flavour of PA space restriction.



Applied to target-arm.next, thanks.

-- PMM

Re: [PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Peter Maydell]

On Fri, 14 Jan 2022 at 14:08, Marc Zyngier <maz@kernel.org> wrote:
>
> Here's yet another stab at enabling QEMU on systems with
> pathologically reduced IPA ranges such as the Apple M1 (previous
> version at [1]). Eventually, we're able to run a KVM guest with more
> than just 3GB of RAM on a system with a 36bit IPA space, and at most
> 123 vCPUs.
>
> This also addresses some pathological QEMU behaviours, where the
> highmem property is used as a flag allowing exposure of devices that
> can't possibly fit in the PA space of the VM, resulting in a guest
> failure.
>
> In the end, we generalise the notion of PA space when exposing
> individual devices in the expanded memory map, and treat highmem as
> another flavour of PA space restriction.



Applied to target-arm.next, thanks.

-- PMM

Re: [PATCH v5 0/6] target/arm: Reduced-IPA space and highmem fixes

[Peter Maydell]

On Fri, 14 Jan 2022 at 14:08, Marc Zyngier <maz@kernel.org> wrote:
>
> Here's yet another stab at enabling QEMU on systems with
> pathologically reduced IPA ranges such as the Apple M1 (previous
> version at [1]). Eventually, we're able to run a KVM guest with more
> than just 3GB of RAM on a system with a 36bit IPA space, and at most
> 123 vCPUs.
>
> This also addresses some pathological QEMU behaviours, where the
> highmem property is used as a flag allowing exposure of devices that
> can't possibly fit in the PA space of the VM, resulting in a guest
> failure.
>
> In the end, we generalise the notion of PA space when exposing
> individual devices in the expanded memory map, and treat highmem as
> another flavour of PA space restriction.



Applied to target-arm.next, thanks.

-- PMM
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm