* [Qemu-devel] [PULL 00/31] Block layer patches
@ 2016-06-08 9:16 Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 01/31] block: split write_zeroes always Kevin Wolf
` (31 more replies)
0 siblings, 32 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
The following changes since commit 6ed5546fa7bf12c5b87ef76bafb86e1d77ed6e85:
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-06-07' into staging (2016-06-07 16:34:45 +0100)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git tags/for-upstream
for you to fetch changes up to 55d539c8f75abab70301a43d8c94b976f6ddc358:
qemu-img bench: Add --flush-interval (2016-06-08 10:21:09 +0200)
----------------------------------------------------------------
Block layer patches
----------------------------------------------------------------
Colin Lord (1):
blockdev: clean up error handling in do_open_tray
Denis V. Lunev (4):
block: split write_zeroes always
qcow2: simplify logic in qcow2_co_write_zeroes
qcow2: add tracepoints for qcow2_co_write_zeroes
qcow2: avoid extra flushes in qcow2
Eric Blake (15):
qemu-iotests: Test one more spot for optimizing write_zeroes
qcow2: Catch more unaligned write_zero into zero cluster
iscsi: Use block size as minimum zero/discard alignment
block: Track write zero limits in bytes
block: Add .bdrv_co_pwrite_zeroes()
block: Switch bdrv_write_zeroes() to byte interface
iscsi: Convert to bdrv_co_pwrite_zeroes()
qcow2: Convert to bdrv_co_pwrite_zeroes()
blkreplay: Convert to bdrv_co_pwrite_zeroes()
gluster: Convert to bdrv_co_pwrite_zeroes()
qed: Convert to bdrv_co_pwrite_zeroes()
raw-posix: Convert to bdrv_co_pwrite_zeroes()
raw_bsd: Convert to bdrv_co_pwrite_zeroes()
vmdk: Convert to bdrv_co_pwrite_zeroes()
block: Kill bdrv_co_write_zeroes()
Fam Zheng (1):
raw-posix: Fetch max sectors for host block device
Kevin Wolf (9):
migration/block: Convert load to BlockBackend
migration/block: Convert saving to BlockBackend
block: Fix bdrv_all_delete_snapshot() error handling
block: Don't emulate natively supported pwritev flags
qemu-img bench
qemu-img bench: Sequential writes
qemu-img bench: Make start offset configurable
qemu-img bench: Implement -S (step size)
qemu-img bench: Add --flush-interval
Peter Lieven (1):
block: assert that bs->request_alignment is a power of 2
block.c | 2 +-
block/blkreplay.c | 8 +-
block/gluster.c | 14 +-
block/io.c | 121 +++++++++--------
block/iscsi.c | 72 ++++++----
block/parallels.c | 4 +-
block/qcow2-cache.c | 11 +-
block/qcow2-cluster.c | 3 +-
block/qcow2.c | 91 ++++++-------
block/qcow2.h | 1 +
block/qed.c | 35 +++--
block/raw-posix.c | 58 +++++---
block/raw_bsd.c | 10 +-
block/snapshot.c | 3 -
block/vmdk.c | 18 ++-
blockdev.c | 46 ++++---
include/block/block.h | 10 +-
include/block/block_int.h | 16 ++-
migration/block.c | 147 ++++++++++++--------
qemu-img-cmds.hx | 6 +
qemu-img.c | 329 +++++++++++++++++++++++++++++++++++++++++++++
qemu-img.texi | 24 ++++
tests/qemu-iotests/034 | 2 +-
tests/qemu-iotests/154 | 42 +++++-
tests/qemu-iotests/154.out | 55 +++++++-
trace-events | 6 +-
26 files changed, 831 insertions(+), 303 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 01/31] block: split write_zeroes always
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 02/31] qcow2: simplify logic in qcow2_co_write_zeroes Kevin Wolf
` (30 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: "Denis V. Lunev" <den@openvz.org>
We should split requests even if they are less than write_zeroes_alignment.
For example we can have the following request:
offset 62k
size 4k
write_zeroes_alignment 64k
The original code sent 1 request covering 2 qcow2 clusters, and resulted
in both clusters being allocated. But by splitting the request, we can
cater to the case where one of the two clusters can be zeroed as a
whole, for only 1 cluster allocated after the operation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1463476543-3087-2-git-send-email-den@openvz.org>
[eblake: Avoid exceeding nb_sectors, hoist alignment checks out of
loop, and update testsuite to show that patch works]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 30 +++++++++++++++++-------------
tests/qemu-iotests/154.out | 18 ++++++++++++------
2 files changed, 29 insertions(+), 19 deletions(-)
diff --git a/block/io.c b/block/io.c
index 6070e77..c73be55 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1118,28 +1118,32 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
struct iovec iov = {0};
int ret = 0;
bool need_flush = false;
+ int head = 0;
+ int tail = 0;
int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes,
BDRV_REQUEST_MAX_SECTORS);
+ if (bs->bl.write_zeroes_alignment) {
+ assert(is_power_of_2(bs->bl.write_zeroes_alignment));
+ head = sector_num & (bs->bl.write_zeroes_alignment - 1);
+ tail = (sector_num + nb_sectors) & (bs->bl.write_zeroes_alignment - 1);
+ max_write_zeroes &= ~(bs->bl.write_zeroes_alignment - 1);
+ }
while (nb_sectors > 0 && !ret) {
int num = nb_sectors;
/* Align request. Block drivers can expect the "bulk" of the request
- * to be aligned.
+ * to be aligned, and that unaligned requests do not cross cluster
+ * boundaries.
*/
- if (bs->bl.write_zeroes_alignment
- && num > bs->bl.write_zeroes_alignment) {
- if (sector_num % bs->bl.write_zeroes_alignment != 0) {
- /* Make a small request up to the first aligned sector. */
- num = bs->bl.write_zeroes_alignment;
- num -= sector_num % bs->bl.write_zeroes_alignment;
- } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
- /* Shorten the request to the last aligned sector. num cannot
- * underflow because num > bs->bl.write_zeroes_alignment.
- */
- num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
- }
+ if (head) {
+ /* Make a small request up to the first aligned sector. */
+ num = MIN(nb_sectors, bs->bl.write_zeroes_alignment - head);
+ head = 0;
+ } else if (tail && num > bs->bl.write_zeroes_alignment) {
+ /* Shorten the request to the last aligned sector. */
+ num -= tail;
}
/* limit request size */
diff --git a/tests/qemu-iotests/154.out b/tests/qemu-iotests/154.out
index 8946b73..b9d27c5 100644
--- a/tests/qemu-iotests/154.out
+++ b/tests/qemu-iotests/154.out
@@ -106,11 +106,14 @@ read 1024/1024 bytes at offset 67584
read 5120/5120 bytes at offset 68608
5 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
[{ "start": 0, "length": 32768, "depth": 1, "zero": true, "data": false},
-{ "start": 32768, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 20480},
+{ "start": 32768, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 20480},
+{ "start": 36864, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 40960, "length": 8192, "depth": 1, "zero": true, "data": false},
-{ "start": 49152, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 28672},
+{ "start": 49152, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 24576},
+{ "start": 53248, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 57344, "length": 8192, "depth": 1, "zero": true, "data": false},
-{ "start": 65536, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 36864},
+{ "start": 65536, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 28672},
+{ "start": 69632, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 73728, "length": 134144000, "depth": 1, "zero": true, "data": false}]
== spanning two clusters, non-zero after request ==
@@ -145,11 +148,14 @@ read 7168/7168 bytes at offset 65536
read 1024/1024 bytes at offset 72704
1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
[{ "start": 0, "length": 32768, "depth": 1, "zero": true, "data": false},
-{ "start": 32768, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 20480},
+{ "start": 32768, "length": 4096, "depth": 0, "zero": true, "data": false},
+{ "start": 36864, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 20480},
{ "start": 40960, "length": 8192, "depth": 1, "zero": true, "data": false},
-{ "start": 49152, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 28672},
+{ "start": 49152, "length": 4096, "depth": 0, "zero": true, "data": false},
+{ "start": 53248, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 24576},
{ "start": 57344, "length": 8192, "depth": 1, "zero": true, "data": false},
-{ "start": 65536, "length": 8192, "depth": 0, "zero": false, "data": true, "offset": 36864},
+{ "start": 65536, "length": 4096, "depth": 0, "zero": true, "data": false},
+{ "start": 69632, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 28672},
{ "start": 73728, "length": 134144000, "depth": 1, "zero": true, "data": false}]
== spanning two clusters, partially overwriting backing file ==
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 02/31] qcow2: simplify logic in qcow2_co_write_zeroes
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 01/31] block: split write_zeroes always Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 03/31] qcow2: add tracepoints for qcow2_co_write_zeroes Kevin Wolf
` (29 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: "Denis V. Lunev" <den@openvz.org>
Unaligned requests will occupy only one cluster. This is true since the
previous commit. Simplify the code taking this consideration into
account.
In other words, the caller is now buggy if it ever passes us an unaligned
request that crosses cluster boundaries (the only requests that can cross
boundaries will be aligned).
There are no other changes so far.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1463476543-3087-3-git-send-email-den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.c | 23 +++++------------------
1 file changed, 5 insertions(+), 18 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index c9306a7..2f73201 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2438,33 +2438,20 @@ static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
int tail = (sector_num + nb_sectors) % s->cluster_sectors;
if (head != 0 || tail != 0) {
- int64_t cl_end = -1;
+ int64_t cl_start = sector_num - head;
- sector_num -= head;
- nb_sectors += head;
+ assert(cl_start + s->cluster_sectors >= sector_num + nb_sectors);
- if (tail != 0) {
- nb_sectors += s->cluster_sectors - tail;
- }
+ sector_num = cl_start;
+ nb_sectors = s->cluster_sectors;
if (!is_zero_cluster(bs, sector_num)) {
return -ENOTSUP;
}
- if (nb_sectors > s->cluster_sectors) {
- /* Technically the request can cover 2 clusters, f.e. 4k write
- at s->cluster_sectors - 2k offset. One of these cluster can
- be zeroed, one unallocated */
- cl_end = sector_num + nb_sectors - s->cluster_sectors;
- if (!is_zero_cluster(bs, cl_end)) {
- return -ENOTSUP;
- }
- }
-
qemu_co_mutex_lock(&s->lock);
/* We can have new write after previous check */
- if (!is_zero_cluster_top_locked(bs, sector_num) ||
- (cl_end > 0 && !is_zero_cluster_top_locked(bs, cl_end))) {
+ if (!is_zero_cluster_top_locked(bs, sector_num)) {
qemu_co_mutex_unlock(&s->lock);
return -ENOTSUP;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 03/31] qcow2: add tracepoints for qcow2_co_write_zeroes
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 01/31] block: split write_zeroes always Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 02/31] qcow2: simplify logic in qcow2_co_write_zeroes Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 04/31] qemu-iotests: Test one more spot for optimizing write_zeroes Kevin Wolf
` (28 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: "Denis V. Lunev" <den@openvz.org>
This patch follows guidelines of all other tracepoints in qcow2, like ones
in qcow2_co_writev. I think that they should dump values in the same
quantities or be changed all together.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1463476543-3087-4-git-send-email-den@openvz.org>
[eblake: typo fix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.c | 5 +++++
trace-events | 2 ++
2 files changed, 7 insertions(+)
diff --git a/block/qcow2.c b/block/qcow2.c
index 2f73201..105fd5e 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2437,6 +2437,9 @@ static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
int head = sector_num % s->cluster_sectors;
int tail = (sector_num + nb_sectors) % s->cluster_sectors;
+ trace_qcow2_write_zeroes_start_req(qemu_coroutine_self(), sector_num,
+ nb_sectors);
+
if (head != 0 || tail != 0) {
int64_t cl_start = sector_num - head;
@@ -2459,6 +2462,8 @@ static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
qemu_co_mutex_lock(&s->lock);
}
+ trace_qcow2_write_zeroes(qemu_coroutine_self(), sector_num, nb_sectors);
+
/* Whatever is left can use real zero clusters */
ret = qcow2_zero_clusters(bs, sector_num << BDRV_SECTOR_BITS, nb_sectors);
qemu_co_mutex_unlock(&s->lock);
diff --git a/trace-events b/trace-events
index c55d708..5f720d0 100644
--- a/trace-events
+++ b/trace-events
@@ -611,6 +611,8 @@ qcow2_writev_done_req(void *co, int ret) "co %p ret %d"
qcow2_writev_start_part(void *co) "co %p"
qcow2_writev_done_part(void *co, int cur_nr_sectors) "co %p cur_nr_sectors %d"
qcow2_writev_data(void *co, uint64_t offset) "co %p offset %" PRIx64
+qcow2_write_zeroes_start_req(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
+qcow2_write_zeroes(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
# block/qcow2-cluster.c
qcow2_alloc_clusters_offset(void *co, uint64_t offset, int num) "co %p offset %" PRIx64 " num %d"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 04/31] qemu-iotests: Test one more spot for optimizing write_zeroes
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (2 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 03/31] qcow2: add tracepoints for qcow2_co_write_zeroes Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 05/31] qcow2: Catch more unaligned write_zero into zero cluster Kevin Wolf
` (27 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Add another test to 154, showing that we currently allocate a
data cluster in the top layer if any sector of the backing file
was allocated. The next patch will optimize this case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/154 | 40 ++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/154.out | 37 +++++++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
diff --git a/tests/qemu-iotests/154 b/tests/qemu-iotests/154
index 23f1b3a..5905c55 100755
--- a/tests/qemu-iotests/154
+++ b/tests/qemu-iotests/154
@@ -115,6 +115,46 @@ $QEMU_IO -c "read -P 0 40k 3k" "$TEST_IMG" | _filter_qemu_io
$QEMU_IMG map --output=json "$TEST_IMG" | _filter_qemu_img_map
echo
+echo == write_zeroes covers non-zero data ==
+
+CLUSTER_SIZE=512 TEST_IMG="$TEST_IMG.base" _make_test_img $size
+_make_test_img -b "$TEST_IMG.base"
+
+# non-zero data at front of request
+# Backing file: -- XX -- --
+# Active layer: -- 00 00 --
+
+$QEMU_IO -c "write -P 0x11 5k 1k" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 5k 2k" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -P 0 4k 4k" "$TEST_IMG" | _filter_qemu_io
+
+# non-zero data at end of request
+# Backing file: -- -- XX --
+# Active layer: -- 00 00 --
+
+$QEMU_IO -c "write -P 0x11 14k 1k" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 13k 2k" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -P 0 12k 4k" "$TEST_IMG" | _filter_qemu_io
+
+# non-zero data matches size of request
+# Backing file: -- XX XX --
+# Active layer: -- 00 00 --
+
+$QEMU_IO -c "write -P 0x11 21k 2k" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 21k 2k" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -P 0 20k 4k" "$TEST_IMG" | _filter_qemu_io
+
+# non-zero data smaller than request
+# Backing file: -- -X X- --
+# Active layer: -- 00 00 --
+
+$QEMU_IO -c "write -P 0x11 30208 1k" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 29k 2k" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -P 0 28k 4k" "$TEST_IMG" | _filter_qemu_io
+
+$QEMU_IMG map --output=json "$TEST_IMG" | _filter_qemu_img_map
+
+echo
echo == spanning two clusters, non-zero before request ==
CLUSTER_SIZE=512 TEST_IMG="$TEST_IMG.base" _make_test_img $size
diff --git a/tests/qemu-iotests/154.out b/tests/qemu-iotests/154.out
index b9d27c5..531fd8c 100644
--- a/tests/qemu-iotests/154.out
+++ b/tests/qemu-iotests/154.out
@@ -74,6 +74,43 @@ read 3072/3072 bytes at offset 40960
{ "start": 40960, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 24576},
{ "start": 45056, "length": 134172672, "depth": 1, "zero": true, "data": false}]
+== write_zeroes covers non-zero data ==
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
+wrote 1024/1024 bytes at offset 5120
+1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2048/2048 bytes at offset 5120
+2 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 4096
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 1024/1024 bytes at offset 14336
+1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2048/2048 bytes at offset 13312
+2 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 12288
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2048/2048 bytes at offset 21504
+2 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2048/2048 bytes at offset 21504
+2 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 20480
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 1024/1024 bytes at offset 30208
+1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2048/2048 bytes at offset 29696
+2 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 28672
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+[{ "start": 0, "length": 4096, "depth": 1, "zero": true, "data": false},
+{ "start": 4096, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 20480},
+{ "start": 8192, "length": 4096, "depth": 1, "zero": true, "data": false},
+{ "start": 12288, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 24576},
+{ "start": 16384, "length": 4096, "depth": 1, "zero": true, "data": false},
+{ "start": 20480, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 28672},
+{ "start": 24576, "length": 4096, "depth": 1, "zero": true, "data": false},
+{ "start": 28672, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 32768},
+{ "start": 32768, "length": 134184960, "depth": 1, "zero": true, "data": false}]
+
== spanning two clusters, non-zero before request ==
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 05/31] qcow2: Catch more unaligned write_zero into zero cluster
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (3 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 04/31] qemu-iotests: Test one more spot for optimizing write_zeroes Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 06/31] iscsi: Use block size as minimum zero/discard alignment Kevin Wolf
` (26 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
is_zero_cluster() and is_zero_cluster_top_locked() are used only
by qcow2_co_write_zeroes(). The former is too broad (we don't
care if the sectors we are about to overwrite are non-zero, only
that all other sectors in the cluster are zero), so it needs to
be called up to twice but with smaller limits - rename it along
with adding the neeeded parameter. The latter can be inlined for
more compact code.
The testsuite change shows that we now have a sparser top file
when an unaligned write_zeroes overwrites the only portion of
the backing file with data.
Based on a patch proposal by Denis V. Lunev.
CC: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.c | 47 +++++++++++++++++++++++-----------------------
tests/qemu-iotests/154.out | 8 ++++----
2 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index 105fd5e..ecac399 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2406,26 +2406,19 @@ finish:
}
-static bool is_zero_cluster(BlockDriverState *bs, int64_t start)
+static bool is_zero_sectors(BlockDriverState *bs, int64_t start,
+ uint32_t count)
{
- BDRVQcow2State *s = bs->opaque;
int nr;
BlockDriverState *file;
- int64_t res = bdrv_get_block_status_above(bs, NULL, start,
- s->cluster_sectors, &nr, &file);
- return res >= 0 && (res & BDRV_BLOCK_ZERO) && nr == s->cluster_sectors;
-}
-
-static bool is_zero_cluster_top_locked(BlockDriverState *bs, int64_t start)
-{
- BDRVQcow2State *s = bs->opaque;
- int nr = s->cluster_sectors;
- uint64_t off;
- int ret;
+ int64_t res;
- ret = qcow2_get_cluster_offset(bs, start << BDRV_SECTOR_BITS, &nr, &off);
- assert(nr == s->cluster_sectors);
- return ret == QCOW2_CLUSTER_UNALLOCATED || ret == QCOW2_CLUSTER_ZERO;
+ if (!count) {
+ return true;
+ }
+ res = bdrv_get_block_status_above(bs, NULL, start, count,
+ &nr, &file);
+ return res >= 0 && (res & BDRV_BLOCK_ZERO) && nr == count;
}
static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
@@ -2434,27 +2427,33 @@ static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
int ret;
BDRVQcow2State *s = bs->opaque;
- int head = sector_num % s->cluster_sectors;
- int tail = (sector_num + nb_sectors) % s->cluster_sectors;
+ uint32_t head = sector_num % s->cluster_sectors;
+ uint32_t tail = (sector_num + nb_sectors) % s->cluster_sectors;
trace_qcow2_write_zeroes_start_req(qemu_coroutine_self(), sector_num,
nb_sectors);
- if (head != 0 || tail != 0) {
+ if (head || tail) {
int64_t cl_start = sector_num - head;
+ uint64_t off;
+ int nr;
assert(cl_start + s->cluster_sectors >= sector_num + nb_sectors);
- sector_num = cl_start;
- nb_sectors = s->cluster_sectors;
-
- if (!is_zero_cluster(bs, sector_num)) {
+ /* check whether remainder of cluster already reads as zero */
+ if (!(is_zero_sectors(bs, cl_start, head) &&
+ is_zero_sectors(bs, sector_num + nb_sectors,
+ -tail & (s->cluster_sectors - 1)))) {
return -ENOTSUP;
}
qemu_co_mutex_lock(&s->lock);
/* We can have new write after previous check */
- if (!is_zero_cluster_top_locked(bs, sector_num)) {
+ sector_num = cl_start;
+ nb_sectors = nr = s->cluster_sectors;
+ ret = qcow2_get_cluster_offset(bs, cl_start << BDRV_SECTOR_BITS,
+ &nr, &off);
+ if (ret != QCOW2_CLUSTER_UNALLOCATED && ret != QCOW2_CLUSTER_ZERO) {
qemu_co_mutex_unlock(&s->lock);
return -ENOTSUP;
}
diff --git a/tests/qemu-iotests/154.out b/tests/qemu-iotests/154.out
index 531fd8c..da9eabd 100644
--- a/tests/qemu-iotests/154.out
+++ b/tests/qemu-iotests/154.out
@@ -102,13 +102,13 @@ wrote 2048/2048 bytes at offset 29696
read 4096/4096 bytes at offset 28672
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
[{ "start": 0, "length": 4096, "depth": 1, "zero": true, "data": false},
-{ "start": 4096, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 20480},
+{ "start": 4096, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 8192, "length": 4096, "depth": 1, "zero": true, "data": false},
-{ "start": 12288, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 24576},
+{ "start": 12288, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 16384, "length": 4096, "depth": 1, "zero": true, "data": false},
-{ "start": 20480, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 28672},
+{ "start": 20480, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 24576, "length": 4096, "depth": 1, "zero": true, "data": false},
-{ "start": 28672, "length": 4096, "depth": 0, "zero": false, "data": true, "offset": 32768},
+{ "start": 28672, "length": 4096, "depth": 0, "zero": true, "data": false},
{ "start": 32768, "length": 134184960, "depth": 1, "zero": true, "data": false}]
== spanning two clusters, non-zero before request ==
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 06/31] iscsi: Use block size as minimum zero/discard alignment
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (4 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 05/31] qcow2: Catch more unaligned write_zero into zero cluster Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 07/31] block: Track write zero limits in bytes Kevin Wolf
` (25 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
If hardware does not advertise a minimum zero/discard
alignment, we still want to guarantee that the block layer
will align requests to our blocks, rather than the arbitrary
512-byte BDRV sector size.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/iscsi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/block/iscsi.c b/block/iscsi.c
index e7d5f7b..94f9974 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -1711,6 +1711,8 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
}
bs->bl.discard_alignment =
sector_limits_lun2qemu(iscsilun->bl.opt_unmap_gran, iscsilun);
+ } else {
+ bs->bl.discard_alignment = iscsilun->block_size >> BDRV_SECTOR_BITS;
}
if (iscsilun->bl.max_ws_len < 0xffffffff) {
@@ -1720,6 +1722,9 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
if (iscsilun->lbp.lbpws) {
bs->bl.write_zeroes_alignment =
sector_limits_lun2qemu(iscsilun->bl.opt_unmap_gran, iscsilun);
+ } else {
+ bs->bl.write_zeroes_alignment =
+ iscsilun->block_size >> BDRV_SECTOR_BITS;
}
bs->bl.opt_transfer_length =
sector_limits_lun2qemu(iscsilun->bl.opt_xfer_len, iscsilun);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 07/31] block: Track write zero limits in bytes
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (5 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 06/31] iscsi: Use block size as minimum zero/discard alignment Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 08/31] block: Add .bdrv_co_pwrite_zeroes() Kevin Wolf
` (24 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step towards removing sector-based interfaces: convert
the maximum write and minimum alignment values from sectors to
bytes. Rename the variables to let the compiler check that all
users are converted to the new semantics.
The maximum remains an int as long as BDRV_REQUEST_MAX_SECTORS
is constrained by INT_MAX (this means that we can't even
support a 2G write_zeroes, but just under it) - changing
operation lengths to unsigned or to 64-bits is a much bigger
audit, and debatable if we even want to do it (since at the
core, a 32-bit platform will still have ssize_t as its
underlying limit on write()).
Meanwhile, alignment is changed to 'uint32_t', since it makes no
sense to have an alignment larger than the maximum write, and
less painful to use an unsigned type with well-defined behavior
in bit operations than to have to worry about what happens if
a driver mistakenly supplies a negative alignment.
Add an assert that no one was trying to use sectors to get a
write zeroes larger than 2G, and therefore that a later conversion
to bytes won't be impacted by keeping the limit at 32 bits.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 22 +++++++++++++---------
block/iscsi.c | 13 ++++++-------
block/qcow2.c | 2 +-
block/qed.c | 2 +-
block/vmdk.c | 6 +++---
include/block/block_int.h | 10 ++++++----
6 files changed, 30 insertions(+), 25 deletions(-)
diff --git a/block/io.c b/block/io.c
index c73be55..1eda1b2 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1121,15 +1121,19 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
int head = 0;
int tail = 0;
- int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes,
- BDRV_REQUEST_MAX_SECTORS);
- if (bs->bl.write_zeroes_alignment) {
- assert(is_power_of_2(bs->bl.write_zeroes_alignment));
- head = sector_num & (bs->bl.write_zeroes_alignment - 1);
- tail = (sector_num + nb_sectors) & (bs->bl.write_zeroes_alignment - 1);
- max_write_zeroes &= ~(bs->bl.write_zeroes_alignment - 1);
+ int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_pwrite_zeroes, INT_MAX);
+ int write_zeroes_sector_align =
+ bs->bl.pwrite_zeroes_alignment >> BDRV_SECTOR_BITS;
+
+ max_write_zeroes >>= BDRV_SECTOR_BITS;
+ if (write_zeroes_sector_align) {
+ assert(is_power_of_2(bs->bl.pwrite_zeroes_alignment));
+ head = sector_num & (write_zeroes_sector_align - 1);
+ tail = (sector_num + nb_sectors) & (write_zeroes_sector_align - 1);
+ max_write_zeroes &= ~(write_zeroes_sector_align - 1);
}
+ assert(nb_sectors <= BDRV_REQUEST_MAX_SECTORS);
while (nb_sectors > 0 && !ret) {
int num = nb_sectors;
@@ -1139,9 +1143,9 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
*/
if (head) {
/* Make a small request up to the first aligned sector. */
- num = MIN(nb_sectors, bs->bl.write_zeroes_alignment - head);
+ num = MIN(nb_sectors, write_zeroes_sector_align - head);
head = 0;
- } else if (tail && num > bs->bl.write_zeroes_alignment) {
+ } else if (tail && num > write_zeroes_sector_align) {
/* Shorten the request to the last aligned sector. */
num -= tail;
}
diff --git a/block/iscsi.c b/block/iscsi.c
index 94f9974..52ea9d7 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -1715,16 +1715,15 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
bs->bl.discard_alignment = iscsilun->block_size >> BDRV_SECTOR_BITS;
}
- if (iscsilun->bl.max_ws_len < 0xffffffff) {
- bs->bl.max_write_zeroes =
- sector_limits_lun2qemu(iscsilun->bl.max_ws_len, iscsilun);
+ if (iscsilun->bl.max_ws_len < 0xffffffff / iscsilun->block_size) {
+ bs->bl.max_pwrite_zeroes =
+ iscsilun->bl.max_ws_len * iscsilun->block_size;
}
if (iscsilun->lbp.lbpws) {
- bs->bl.write_zeroes_alignment =
- sector_limits_lun2qemu(iscsilun->bl.opt_unmap_gran, iscsilun);
+ bs->bl.pwrite_zeroes_alignment =
+ iscsilun->bl.opt_unmap_gran * iscsilun->block_size;
} else {
- bs->bl.write_zeroes_alignment =
- iscsilun->block_size >> BDRV_SECTOR_BITS;
+ bs->bl.pwrite_zeroes_alignment = iscsilun->block_size;
}
bs->bl.opt_transfer_length =
sector_limits_lun2qemu(iscsilun->bl.opt_xfer_len, iscsilun);
diff --git a/block/qcow2.c b/block/qcow2.c
index ecac399..a6ea6cb 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1193,7 +1193,7 @@ static void qcow2_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVQcow2State *s = bs->opaque;
- bs->bl.write_zeroes_alignment = s->cluster_sectors;
+ bs->bl.pwrite_zeroes_alignment = s->cluster_size;
}
static int qcow2_set_key(BlockDriverState *bs, const char *key)
diff --git a/block/qed.c b/block/qed.c
index 0f62192..113b8e8 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -517,7 +517,7 @@ static void bdrv_qed_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVQEDState *s = bs->opaque;
- bs->bl.write_zeroes_alignment = s->header.cluster_size >> BDRV_SECTOR_BITS;
+ bs->bl.pwrite_zeroes_alignment = s->header.cluster_size;
}
/* We have nothing to do for QED reopen, stubs just return
diff --git a/block/vmdk.c b/block/vmdk.c
index 2205cc8..5a01e16 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -997,9 +997,9 @@ static void vmdk_refresh_limits(BlockDriverState *bs, Error **errp)
for (i = 0; i < s->num_extents; i++) {
if (!s->extents[i].flat) {
- bs->bl.write_zeroes_alignment =
- MAX(bs->bl.write_zeroes_alignment,
- s->extents[i].cluster_sectors);
+ bs->bl.pwrite_zeroes_alignment =
+ MAX(bs->bl.pwrite_zeroes_alignment,
+ s->extents[i].cluster_sectors << BDRV_SECTOR_BITS);
}
}
}
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 30a9717..2e9c81f 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -328,11 +328,13 @@ typedef struct BlockLimits {
/* optimal alignment for discard requests in sectors */
int64_t discard_alignment;
- /* maximum number of sectors that can zeroized at once */
- int max_write_zeroes;
+ /* maximum number of bytes that can zeroized at once (since it is
+ * signed, it must be < 2G, if set) */
+ int32_t max_pwrite_zeroes;
- /* optimal alignment for write zeroes requests in sectors */
- int64_t write_zeroes_alignment;
+ /* optimal alignment for write zeroes requests in bytes, must be
+ * power of 2, and less than max_pwrite_zeroes if that is set */
+ uint32_t pwrite_zeroes_alignment;
/* optimal transfer length in sectors */
int opt_transfer_length;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 08/31] block: Add .bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (6 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 07/31] block: Track write zero limits in bytes Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 09/31] block: Switch bdrv_write_zeroes() to byte interface Kevin Wolf
` (23 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Update bdrv_co_do_write_zeroes() to be byte-based, and select
between the new byte-based bdrv_co_pwrite_zeroes() or the old
bdrv_co_write_zeroes(). The next patches will convert drivers,
then remove the old interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 78 ++++++++++++++++++++++++++---------------------
include/block/block_int.h | 4 ++-
2 files changed, 46 insertions(+), 36 deletions(-)
diff --git a/block/io.c b/block/io.c
index 1eda1b2..91a2e23 100644
--- a/block/io.c
+++ b/block/io.c
@@ -42,8 +42,8 @@ static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
void *opaque,
bool is_write);
static void coroutine_fn bdrv_co_do_rw(void *opaque);
-static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
+static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags);
static void bdrv_parent_drained_begin(BlockDriverState *bs)
{
@@ -893,10 +893,12 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
goto err;
}
- if (drv->bdrv_co_write_zeroes &&
+ if ((drv->bdrv_co_write_zeroes || drv->bdrv_co_pwrite_zeroes) &&
buffer_is_zero(bounce_buffer, iov.iov_len)) {
- ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
- cluster_nb_sectors, 0);
+ ret = bdrv_co_do_pwrite_zeroes(bs,
+ cluster_sector_num * BDRV_SECTOR_SIZE,
+ cluster_nb_sectors * BDRV_SECTOR_SIZE,
+ 0);
} else {
/* This does not change the data on the disk, it is not necessary
* to flush even in cache=writethrough mode.
@@ -1110,8 +1112,8 @@ int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
#define MAX_WRITE_ZEROES_BOUNCE_BUFFER 32768
-static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
+static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags)
{
BlockDriver *drv = bs->drv;
QEMUIOVector qiov;
@@ -1122,20 +1124,16 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
int tail = 0;
int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_pwrite_zeroes, INT_MAX);
- int write_zeroes_sector_align =
- bs->bl.pwrite_zeroes_alignment >> BDRV_SECTOR_BITS;
+ int alignment = MAX(bs->bl.pwrite_zeroes_alignment ?: 1,
+ bs->request_alignment);
- max_write_zeroes >>= BDRV_SECTOR_BITS;
- if (write_zeroes_sector_align) {
- assert(is_power_of_2(bs->bl.pwrite_zeroes_alignment));
- head = sector_num & (write_zeroes_sector_align - 1);
- tail = (sector_num + nb_sectors) & (write_zeroes_sector_align - 1);
- max_write_zeroes &= ~(write_zeroes_sector_align - 1);
- }
+ assert(is_power_of_2(alignment));
+ head = offset & (alignment - 1);
+ tail = (offset + count) & (alignment - 1);
+ max_write_zeroes &= ~(alignment - 1);
- assert(nb_sectors <= BDRV_REQUEST_MAX_SECTORS);
- while (nb_sectors > 0 && !ret) {
- int num = nb_sectors;
+ while (count > 0 && !ret) {
+ int num = count;
/* Align request. Block drivers can expect the "bulk" of the request
* to be aligned, and that unaligned requests do not cross cluster
@@ -1143,9 +1141,9 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
*/
if (head) {
/* Make a small request up to the first aligned sector. */
- num = MIN(nb_sectors, write_zeroes_sector_align - head);
+ num = MIN(count, alignment - head);
head = 0;
- } else if (tail && num > write_zeroes_sector_align) {
+ } else if (tail && num > alignment) {
/* Shorten the request to the last aligned sector. */
num -= tail;
}
@@ -1157,8 +1155,18 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
ret = -ENOTSUP;
/* First try the efficient write zeroes operation */
- if (drv->bdrv_co_write_zeroes) {
- ret = drv->bdrv_co_write_zeroes(bs, sector_num, num,
+ if (drv->bdrv_co_pwrite_zeroes) {
+ ret = drv->bdrv_co_pwrite_zeroes(bs, offset, num,
+ flags & bs->supported_zero_flags);
+ if (ret != -ENOTSUP && (flags & BDRV_REQ_FUA) &&
+ !(bs->supported_zero_flags & BDRV_REQ_FUA)) {
+ need_flush = true;
+ }
+ } else if (drv->bdrv_co_write_zeroes) {
+ assert(offset % BDRV_SECTOR_SIZE == 0);
+ assert(count % BDRV_SECTOR_SIZE == 0);
+ ret = drv->bdrv_co_write_zeroes(bs, offset >> BDRV_SECTOR_BITS,
+ num >> BDRV_SECTOR_BITS,
flags & bs->supported_zero_flags);
if (ret != -ENOTSUP && (flags & BDRV_REQ_FUA) &&
!(bs->supported_zero_flags & BDRV_REQ_FUA)) {
@@ -1181,33 +1189,31 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
write_flags &= ~BDRV_REQ_FUA;
need_flush = true;
}
- num = MIN(num, max_xfer_len);
- iov.iov_len = num * BDRV_SECTOR_SIZE;
+ num = MIN(num, max_xfer_len << BDRV_SECTOR_BITS);
+ iov.iov_len = num;
if (iov.iov_base == NULL) {
- iov.iov_base = qemu_try_blockalign(bs, num * BDRV_SECTOR_SIZE);
+ iov.iov_base = qemu_try_blockalign(bs, num);
if (iov.iov_base == NULL) {
ret = -ENOMEM;
goto fail;
}
- memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
+ memset(iov.iov_base, 0, num);
}
qemu_iovec_init_external(&qiov, &iov, 1);
- ret = bdrv_driver_pwritev(bs, sector_num * BDRV_SECTOR_SIZE,
- num * BDRV_SECTOR_SIZE, &qiov,
- write_flags);
+ ret = bdrv_driver_pwritev(bs, offset, num, &qiov, write_flags);
/* Keep bounce buffer around if it is big enough for all
* all future requests.
*/
- if (num < max_xfer_len) {
+ if (num < max_xfer_len << BDRV_SECTOR_BITS) {
qemu_vfree(iov.iov_base);
iov.iov_base = NULL;
}
}
- sector_num += num;
- nb_sectors -= num;
+ offset += num;
+ count -= num;
}
fail:
@@ -1245,7 +1251,8 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
- !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
+ !(flags & BDRV_REQ_ZERO_WRITE) &&
+ (drv->bdrv_co_pwrite_zeroes || drv->bdrv_co_write_zeroes) &&
qemu_iovec_is_zero(qiov)) {
flags |= BDRV_REQ_ZERO_WRITE;
if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
@@ -1257,7 +1264,8 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
/* Do nothing, write notifier decided to fail this request */
} else if (flags & BDRV_REQ_ZERO_WRITE) {
bdrv_debug_event(bs, BLKDBG_PWRITEV_ZERO);
- ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
+ ret = bdrv_co_do_pwrite_zeroes(bs, sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS, flags);
} else {
bdrv_debug_event(bs, BLKDBG_PWRITEV);
ret = bdrv_driver_pwritev(bs, offset, bytes, qiov, flags);
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 2e9c81f..1dfdf92 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -165,6 +165,8 @@ struct BlockDriver {
*/
int coroutine_fn (*bdrv_co_write_zeroes)(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
+ int coroutine_fn (*bdrv_co_pwrite_zeroes)(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags);
int coroutine_fn (*bdrv_co_discard)(BlockDriverState *bs,
int64_t sector_num, int nb_sectors);
int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
@@ -456,7 +458,7 @@ struct BlockDriverState {
unsigned int request_alignment;
/* Flags honored during pwrite (so far: BDRV_REQ_FUA) */
unsigned int supported_write_flags;
- /* Flags honored during write_zeroes (so far: BDRV_REQ_FUA,
+ /* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA,
* BDRV_REQ_MAY_UNMAP) */
unsigned int supported_zero_flags;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 09/31] block: Switch bdrv_write_zeroes() to byte interface
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (7 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 08/31] block: Add .bdrv_co_pwrite_zeroes() Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 10/31] iscsi: Convert to bdrv_co_pwrite_zeroes() Kevin Wolf
` (22 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics. Do the same for bdrv_co_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/blkreplay.c | 4 +++-
block/io.c | 34 +++++++++++++++++++++-------------
block/parallels.c | 4 +++-
block/qcow2-cluster.c | 3 +--
block/qcow2.c | 9 ++++-----
block/raw_bsd.c | 3 ++-
include/block/block.h | 10 +++++-----
migration/block.c | 5 +++--
tests/qemu-iotests/034 | 2 +-
tests/qemu-iotests/154 | 2 +-
trace-events | 2 +-
11 files changed, 45 insertions(+), 33 deletions(-)
diff --git a/block/blkreplay.c b/block/blkreplay.c
index 42f1813..1a721ad 100755
--- a/block/blkreplay.c
+++ b/block/blkreplay.c
@@ -107,7 +107,9 @@ static int coroutine_fn blkreplay_co_write_zeroes(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
{
uint64_t reqid = request_id++;
- int ret = bdrv_co_write_zeroes(bs->file->bs, sector_num, nb_sectors, flags);
+ int ret = bdrv_co_pwrite_zeroes(bs->file->bs,
+ sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS, flags);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
diff --git a/block/io.c b/block/io.c
index 91a2e23..a426094 100644
--- a/block/io.c
+++ b/block/io.c
@@ -620,18 +620,25 @@ int bdrv_write(BlockDriverState *bs, int64_t sector_num,
return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
}
-int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags)
+int bdrv_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags)
{
- return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
- BDRV_REQ_ZERO_WRITE | flags);
+ QEMUIOVector qiov;
+ struct iovec iov = {
+ .iov_base = NULL,
+ .iov_len = count,
+ };
+
+ qemu_iovec_init_external(&qiov, &iov, 1);
+ return bdrv_prwv_co(bs, offset, &qiov, true,
+ BDRV_REQ_ZERO_WRITE | flags);
}
/*
- * Completely zero out a block device with the help of bdrv_write_zeroes.
+ * Completely zero out a block device with the help of bdrv_pwrite_zeroes.
* The operation is sped up by checking the block status and only writing
* zeroes to the device if they currently do not return zeroes. Optional
- * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP,
+ * flags are passed through to bdrv_pwrite_zeroes (e.g. BDRV_REQ_MAY_UNMAP,
* BDRV_REQ_FUA).
*
* Returns < 0 on error, 0 on success. For error codes see bdrv_write().
@@ -662,7 +669,8 @@ int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
sector_num += n;
continue;
}
- ret = bdrv_write_zeroes(bs, sector_num, n, flags);
+ ret = bdrv_pwrite_zeroes(bs, sector_num << BDRV_SECTOR_BITS,
+ n << BDRV_SECTOR_BITS, flags);
if (ret < 0) {
error_report("error writing zeroes at sector %" PRId64 ": %s",
sector_num, strerror(-ret));
@@ -1526,18 +1534,18 @@ int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
}
-int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- BdrvRequestFlags flags)
+int coroutine_fn bdrv_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count,
+ BdrvRequestFlags flags)
{
- trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
+ trace_bdrv_co_pwrite_zeroes(bs, offset, count, flags);
if (!(bs->open_flags & BDRV_O_UNMAP)) {
flags &= ~BDRV_REQ_MAY_UNMAP;
}
- return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
- BDRV_REQ_ZERO_WRITE | flags);
+ return bdrv_co_pwritev(bs, offset, count, NULL,
+ BDRV_REQ_ZERO_WRITE | flags);
}
typedef struct BdrvCoGetBlockStatusData {
diff --git a/block/parallels.c b/block/parallels.c
index b9b5c6d..d6a1a61 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -210,7 +210,9 @@ static int64_t allocate_clusters(BlockDriverState *bs, int64_t sector_num,
int ret;
space += s->prealloc_size;
if (s->prealloc_mode == PRL_PREALLOC_MODE_FALLOCATE) {
- ret = bdrv_write_zeroes(bs->file->bs, s->data_end, space, 0);
+ ret = bdrv_pwrite_zeroes(bs->file->bs,
+ s->data_end << BDRV_SECTOR_BITS,
+ space << BDRV_SECTOR_BITS, 0);
} else {
ret = bdrv_truncate(bs->file->bs,
(s->data_end + space) << BDRV_SECTOR_BITS);
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index c737973..b04bfaf 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1765,8 +1765,7 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
goto fail;
}
- ret = bdrv_write_zeroes(bs->file->bs, offset / BDRV_SECTOR_SIZE,
- s->cluster_sectors, 0);
+ ret = bdrv_pwrite_zeroes(bs->file->bs, offset, s->cluster_size, 0);
if (ret < 0) {
if (!preallocated) {
qcow2_free_clusters(bs, offset, s->cluster_size,
diff --git a/block/qcow2.c b/block/qcow2.c
index a6ea6cb..cc59efc 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2655,8 +2655,8 @@ static int make_completely_empty(BlockDriverState *bs)
/* After this call, neither the in-memory nor the on-disk refcount
* information accurately describe the actual references */
- ret = bdrv_write_zeroes(bs->file->bs, s->l1_table_offset / BDRV_SECTOR_SIZE,
- l1_clusters * s->cluster_sectors, 0);
+ ret = bdrv_pwrite_zeroes(bs->file->bs, s->l1_table_offset,
+ l1_clusters * s->cluster_size, 0);
if (ret < 0) {
goto fail_broken_refcounts;
}
@@ -2669,9 +2669,8 @@ static int make_completely_empty(BlockDriverState *bs)
* overwrite parts of the existing refcount and L1 table, which is not
* an issue because the dirty flag is set, complete data loss is in fact
* desired and partial data loss is consequently fine as well */
- ret = bdrv_write_zeroes(bs->file->bs, s->cluster_size / BDRV_SECTOR_SIZE,
- (2 + l1_clusters) * s->cluster_size /
- BDRV_SECTOR_SIZE, 0);
+ ret = bdrv_pwrite_zeroes(bs->file->bs, s->cluster_size,
+ (2 + l1_clusters) * s->cluster_size, 0);
/* This call (even if it failed overall) may have overwritten on-disk
* refcount structures; in that case, the in-memory refcount information
* will probably differ from the on-disk information which makes the BDS
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
index 3385ed4..d9adf90 100644
--- a/block/raw_bsd.c
+++ b/block/raw_bsd.c
@@ -131,7 +131,8 @@ static int coroutine_fn raw_co_write_zeroes(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
BdrvRequestFlags flags)
{
- return bdrv_co_write_zeroes(bs->file->bs, sector_num, nb_sectors, flags);
+ return bdrv_co_pwrite_zeroes(bs->file->bs, sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS, flags);
}
static int coroutine_fn raw_co_discard(BlockDriverState *bs,
diff --git a/include/block/block.h b/include/block/block.h
index 3fd5043..54cca28 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -33,7 +33,7 @@ typedef struct BlockDriverInfo {
* True if the driver can optimize writing zeroes by unmapping
* sectors. This is equivalent to the BLKDISCARDZEROES ioctl in Linux
* with the difference that in qemu a discard is allowed to silently
- * fail. Therefore we have to use bdrv_write_zeroes with the
+ * fail. Therefore we have to use bdrv_pwrite_zeroes with the
* BDRV_REQ_MAY_UNMAP flag for an optimized zero write with unmapping.
* After this call the driver has to guarantee that the contents read
* back as zero. It is additionally required that the block device is
@@ -227,8 +227,8 @@ int bdrv_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
-int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags);
+int bdrv_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags);
int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags);
int bdrv_pread(BlockDriverState *bs, int64_t offset,
void *buf, int count);
@@ -247,8 +247,8 @@ int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
* function is not suitable for zeroing the entire image in a single request
* because it may allocate memory for the entire region.
*/
-int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags);
+int coroutine_fn bdrv_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags);
BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
const char *backing_file);
int bdrv_get_backing_file_depth(BlockDriverState *bs);
diff --git a/migration/block.c b/migration/block.c
index e0628d1..16cc1f8 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -883,8 +883,9 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
}
if (flags & BLK_MIG_FLAG_ZERO_BLOCK) {
- ret = bdrv_write_zeroes(bs, addr, nr_sectors,
- BDRV_REQ_MAY_UNMAP);
+ ret = bdrv_pwrite_zeroes(bs, addr << BDRV_SECTOR_BITS,
+ nr_sectors << BDRV_SECTOR_BITS,
+ BDRV_REQ_MAY_UNMAP);
} else {
buf = g_malloc(BLOCK_SIZE);
qemu_get_buffer(f, buf, BLOCK_SIZE);
diff --git a/tests/qemu-iotests/034 b/tests/qemu-iotests/034
index c711cfc..1b28bda 100755
--- a/tests/qemu-iotests/034
+++ b/tests/qemu-iotests/034
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# Test bdrv_write_zeroes with backing files
+# Test bdrv_pwrite_zeroes with backing files (see also 154)
#
# Copyright (C) 2012 Red Hat, Inc.
#
diff --git a/tests/qemu-iotests/154 b/tests/qemu-iotests/154
index 5905c55..7ca7219 100755
--- a/tests/qemu-iotests/154
+++ b/tests/qemu-iotests/154
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# qcow2 specific bdrv_write_zeroes tests with backing files (complements 034)
+# qcow2 specific bdrv_pwrite_zeroes tests with backing files (complements 034)
#
# Copyright (C) 2016 Red Hat, Inc.
#
diff --git a/trace-events b/trace-events
index 5f720d0..cfb1886 100644
--- a/trace-events
+++ b/trace-events
@@ -72,7 +72,7 @@ bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %
bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
-bdrv_co_write_zeroes(void *bs, int64_t sector_num, int nb_sector, int flags) "bs %p sector_num %"PRId64" nb_sectors %d flags %#x"
+bdrv_co_pwrite_zeroes(void *bs, int64_t offset, int count, int flags) "bs %p offset %"PRId64" count %d flags %#x"
bdrv_co_do_copy_on_readv(void *bs, int64_t sector_num, int nb_sectors, int64_t cluster_sector_num, int cluster_nb_sectors) "bs %p sector_num %"PRId64" nb_sectors %d cluster_sector_num %"PRId64" cluster_nb_sectors %d"
# block/stream.c
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 10/31] iscsi: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (8 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 09/31] block: Switch bdrv_write_zeroes() to byte interface Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 11/31] qcow2: " Kevin Wolf
` (21 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
As this is the first byte-based iscsi interface, convert
is_request_lun_aligned() into two versions, one for sectors
and one for bytes. Also, change from outright -EINVAL failure
on an unaligned request, to instead failing with -ENOTSUP to
trigger a read-modify-write fallback, particularly since the
block layer should be honoring bs->request_alignment to avoid
-EINVAL on read/write requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/iscsi.c | 58 ++++++++++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 24 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 52ea9d7..7e78ade 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -401,18 +401,26 @@ static int64_t sector_qemu2lun(int64_t sector, IscsiLun *iscsilun)
return sector * BDRV_SECTOR_SIZE / iscsilun->block_size;
}
-static bool is_request_lun_aligned(int64_t sector_num, int nb_sectors,
- IscsiLun *iscsilun)
+static bool is_byte_request_lun_aligned(int64_t offset, int count,
+ IscsiLun *iscsilun)
{
- if ((sector_num * BDRV_SECTOR_SIZE) % iscsilun->block_size ||
- (nb_sectors * BDRV_SECTOR_SIZE) % iscsilun->block_size) {
- error_report("iSCSI misaligned request: "
- "iscsilun->block_size %u, sector_num %" PRIi64
- ", nb_sectors %d",
- iscsilun->block_size, sector_num, nb_sectors);
- return 0;
- }
- return 1;
+ if (offset % iscsilun->block_size || count % iscsilun->block_size) {
+ error_report("iSCSI misaligned request: "
+ "iscsilun->block_size %u, offset %" PRIi64
+ ", count %d",
+ iscsilun->block_size, offset, count);
+ return false;
+ }
+ return true;
+}
+
+static bool is_sector_request_lun_aligned(int64_t sector_num, int nb_sectors,
+ IscsiLun *iscsilun)
+{
+ assert(nb_sectors < BDRV_REQUEST_MAX_SECTORS);
+ return is_byte_request_lun_aligned(sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS,
+ iscsilun);
}
static unsigned long *iscsi_allocationmap_init(IscsiLun *iscsilun)
@@ -461,7 +469,7 @@ iscsi_co_writev_flags(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
if (fua) {
assert(iscsilun->dpofua);
}
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -541,7 +549,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
ret = -EINVAL;
goto out;
}
@@ -638,7 +646,7 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
uint64_t lba;
uint32_t num_sectors;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -926,7 +934,7 @@ coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
struct IscsiTask iTask;
struct unmap_list list;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -977,8 +985,8 @@ retry:
}
static int
-coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags)
+coroutine_fn iscsi_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
@@ -986,8 +994,8 @@ coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
uint32_t nb_blocks;
bool use_16_for_ws = iscsilun->use_16_for_rw;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
- return -EINVAL;
+ if (!is_byte_request_lun_aligned(offset, count, iscsilun)) {
+ return -ENOTSUP;
}
if (flags & BDRV_REQ_MAY_UNMAP) {
@@ -1008,8 +1016,8 @@ coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
return -ENOTSUP;
}
- lba = sector_qemu2lun(sector_num, iscsilun);
- nb_blocks = sector_qemu2lun(nb_sectors, iscsilun);
+ lba = offset / iscsilun->block_size;
+ nb_blocks = count / iscsilun->block_size;
if (iscsilun->zeroblock == NULL) {
iscsilun->zeroblock = g_try_malloc0(iscsilun->block_size);
@@ -1065,9 +1073,11 @@ retry:
}
if (flags & BDRV_REQ_MAY_UNMAP) {
- iscsi_allocationmap_clear(iscsilun, sector_num, nb_sectors);
+ iscsi_allocationmap_clear(iscsilun, offset >> BDRV_SECTOR_BITS,
+ count >> BDRV_SECTOR_BITS);
} else {
- iscsi_allocationmap_set(iscsilun, sector_num, nb_sectors);
+ iscsi_allocationmap_set(iscsilun, offset >> BDRV_SECTOR_BITS,
+ count >> BDRV_SECTOR_BITS);
}
return 0;
@@ -1856,7 +1866,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_co_get_block_status = iscsi_co_get_block_status,
.bdrv_co_discard = iscsi_co_discard,
- .bdrv_co_write_zeroes = iscsi_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev_flags = iscsi_co_writev_flags,
.bdrv_co_flush_to_disk = iscsi_co_flush,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 11/31] qcow2: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (9 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 10/31] iscsi: Convert to bdrv_co_pwrite_zeroes() Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 12/31] blkreplay: " Kevin Wolf
` (20 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.c | 37 +++++++++++++++++++------------------
trace-events | 4 ++--
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index cc59efc..5e26c3d 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2421,38 +2421,39 @@ static bool is_zero_sectors(BlockDriverState *bs, int64_t start,
return res >= 0 && (res & BDRV_BLOCK_ZERO) && nr == count;
}
-static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
+static coroutine_fn int qcow2_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags)
{
int ret;
BDRVQcow2State *s = bs->opaque;
- uint32_t head = sector_num % s->cluster_sectors;
- uint32_t tail = (sector_num + nb_sectors) % s->cluster_sectors;
+ uint32_t head = offset % s->cluster_size;
+ uint32_t tail = (offset + count) % s->cluster_size;
- trace_qcow2_write_zeroes_start_req(qemu_coroutine_self(), sector_num,
- nb_sectors);
+ trace_qcow2_pwrite_zeroes_start_req(qemu_coroutine_self(), offset, count);
if (head || tail) {
- int64_t cl_start = sector_num - head;
+ int64_t cl_start = (offset - head) >> BDRV_SECTOR_BITS;
uint64_t off;
int nr;
- assert(cl_start + s->cluster_sectors >= sector_num + nb_sectors);
+ assert(head + count <= s->cluster_size);
/* check whether remainder of cluster already reads as zero */
- if (!(is_zero_sectors(bs, cl_start, head) &&
- is_zero_sectors(bs, sector_num + nb_sectors,
- -tail & (s->cluster_sectors - 1)))) {
+ if (!(is_zero_sectors(bs, cl_start,
+ DIV_ROUND_UP(head, BDRV_SECTOR_SIZE)) &&
+ is_zero_sectors(bs, (offset + count) >> BDRV_SECTOR_BITS,
+ DIV_ROUND_UP(-tail & (s->cluster_size - 1),
+ BDRV_SECTOR_SIZE)))) {
return -ENOTSUP;
}
qemu_co_mutex_lock(&s->lock);
/* We can have new write after previous check */
- sector_num = cl_start;
- nb_sectors = nr = s->cluster_sectors;
- ret = qcow2_get_cluster_offset(bs, cl_start << BDRV_SECTOR_BITS,
- &nr, &off);
+ offset = cl_start << BDRV_SECTOR_BITS;
+ count = s->cluster_size;
+ nr = s->cluster_sectors;
+ ret = qcow2_get_cluster_offset(bs, offset, &nr, &off);
if (ret != QCOW2_CLUSTER_UNALLOCATED && ret != QCOW2_CLUSTER_ZERO) {
qemu_co_mutex_unlock(&s->lock);
return -ENOTSUP;
@@ -2461,10 +2462,10 @@ static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
qemu_co_mutex_lock(&s->lock);
}
- trace_qcow2_write_zeroes(qemu_coroutine_self(), sector_num, nb_sectors);
+ trace_qcow2_pwrite_zeroes(qemu_coroutine_self(), offset, count);
/* Whatever is left can use real zero clusters */
- ret = qcow2_zero_clusters(bs, sector_num << BDRV_SECTOR_BITS, nb_sectors);
+ ret = qcow2_zero_clusters(bs, offset, count >> BDRV_SECTOR_BITS);
qemu_co_mutex_unlock(&s->lock);
return ret;
@@ -3371,7 +3372,7 @@ BlockDriver bdrv_qcow2 = {
.bdrv_co_writev = qcow2_co_writev,
.bdrv_co_flush_to_os = qcow2_co_flush_to_os,
- .bdrv_co_write_zeroes = qcow2_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = qcow2_co_pwrite_zeroes,
.bdrv_co_discard = qcow2_co_discard,
.bdrv_truncate = qcow2_truncate,
.bdrv_write_compressed = qcow2_write_compressed,
diff --git a/trace-events b/trace-events
index cfb1886..b1ca05b 100644
--- a/trace-events
+++ b/trace-events
@@ -611,8 +611,8 @@ qcow2_writev_done_req(void *co, int ret) "co %p ret %d"
qcow2_writev_start_part(void *co) "co %p"
qcow2_writev_done_part(void *co, int cur_nr_sectors) "co %p cur_nr_sectors %d"
qcow2_writev_data(void *co, uint64_t offset) "co %p offset %" PRIx64
-qcow2_write_zeroes_start_req(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
-qcow2_write_zeroes(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
+qcow2_pwrite_zeroes_start_req(void *co, int64_t offset, int count) "co %p offset %" PRIx64 " count %d"
+qcow2_pwrite_zeroes(void *co, int64_t offset, int count) "co %p offset %" PRIx64 " count %d"
# block/qcow2-cluster.c
qcow2_alloc_clusters_offset(void *co, uint64_t offset, int num) "co %p offset %" PRIx64 " num %d"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 12/31] blkreplay: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (10 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 11/31] qcow2: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 13/31] gluster: " Kevin Wolf
` (19 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/blkreplay.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/block/blkreplay.c b/block/blkreplay.c
index 1a721ad..525c2d5 100755
--- a/block/blkreplay.c
+++ b/block/blkreplay.c
@@ -103,13 +103,11 @@ static int coroutine_fn blkreplay_co_writev(BlockDriverState *bs,
return ret;
}
-static int coroutine_fn blkreplay_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
+static int coroutine_fn blkreplay_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags)
{
uint64_t reqid = request_id++;
- int ret = bdrv_co_pwrite_zeroes(bs->file->bs,
- sector_num << BDRV_SECTOR_BITS,
- nb_sectors << BDRV_SECTOR_BITS, flags);
+ int ret = bdrv_co_pwrite_zeroes(bs->file->bs, offset, count, flags);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
@@ -149,7 +147,7 @@ static BlockDriver bdrv_blkreplay = {
.bdrv_co_readv = blkreplay_co_readv,
.bdrv_co_writev = blkreplay_co_writev,
- .bdrv_co_write_zeroes = blkreplay_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = blkreplay_co_pwrite_zeroes,
.bdrv_co_discard = blkreplay_co_discard,
.bdrv_co_flush = blkreplay_co_flush,
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 13/31] gluster: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (11 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 12/31] blkreplay: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 14/31] qed: " Kevin Wolf
` (18 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/gluster.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/block/gluster.c b/block/gluster.c
index a8aaacf..d361d8e 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -454,14 +454,12 @@ static void qemu_gluster_reopen_abort(BDRVReopenState *state)
}
#ifdef CONFIG_GLUSTERFS_ZEROFILL
-static coroutine_fn int qemu_gluster_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
+static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int size, BdrvRequestFlags flags)
{
int ret;
GlusterAIOCB acb;
BDRVGlusterState *s = bs->opaque;
- off_t size = nb_sectors * BDRV_SECTOR_SIZE;
- off_t offset = sector_num * BDRV_SECTOR_SIZE;
acb.size = size;
acb.ret = 0;
@@ -769,7 +767,7 @@ static BlockDriver bdrv_gluster = {
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
- .bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
};
@@ -796,7 +794,7 @@ static BlockDriver bdrv_gluster_tcp = {
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
- .bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
};
@@ -823,7 +821,7 @@ static BlockDriver bdrv_gluster_unix = {
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
- .bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
};
@@ -850,7 +848,7 @@ static BlockDriver bdrv_gluster_rdma = {
.bdrv_co_discard = qemu_gluster_co_discard,
#endif
#ifdef CONFIG_GLUSTERFS_ZEROFILL
- .bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.create_opts = &qemu_gluster_create_opts,
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 14/31] qed: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (12 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 13/31] gluster: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 15/31] raw-posix: " Kevin Wolf
` (17 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Kill an abuse of the comma operator while at it (fortunately,
the semantics were still right). Also, the test for requests
not aligned to clusters should be applied always, not just
when a backing file is present.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qed.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/block/qed.c b/block/qed.c
index 113b8e8..1206806 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -1418,7 +1418,7 @@ typedef struct {
bool done;
} QEDWriteZeroesCB;
-static void coroutine_fn qed_co_write_zeroes_cb(void *opaque, int ret)
+static void coroutine_fn qed_co_pwrite_zeroes_cb(void *opaque, int ret)
{
QEDWriteZeroesCB *cb = opaque;
@@ -1429,10 +1429,10 @@ static void coroutine_fn qed_co_write_zeroes_cb(void *opaque, int ret)
}
}
-static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- BdrvRequestFlags flags)
+static int coroutine_fn bdrv_qed_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset,
+ int count,
+ BdrvRequestFlags flags)
{
BlockAIOCB *blockacb;
BDRVQEDState *s = bs->opaque;
@@ -1440,25 +1440,22 @@ static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
QEMUIOVector qiov;
struct iovec iov;
- /* Refuse if there are untouched backing file sectors */
- if (bs->backing) {
- if (qed_offset_into_cluster(s, sector_num * BDRV_SECTOR_SIZE) != 0) {
- return -ENOTSUP;
- }
- if (qed_offset_into_cluster(s, nb_sectors * BDRV_SECTOR_SIZE) != 0) {
- return -ENOTSUP;
- }
+ /* Fall back if the request is not aligned */
+ if (qed_offset_into_cluster(s, offset) ||
+ qed_offset_into_cluster(s, count)) {
+ return -ENOTSUP;
}
/* Zero writes start without an I/O buffer. If a buffer becomes necessary
* then it will be allocated during request processing.
*/
- iov.iov_base = NULL,
- iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE,
+ iov.iov_base = NULL;
+ iov.iov_len = count;
qemu_iovec_init_external(&qiov, &iov, 1);
- blockacb = qed_aio_setup(bs, sector_num, &qiov, nb_sectors,
- qed_co_write_zeroes_cb, &cb,
+ blockacb = qed_aio_setup(bs, offset >> BDRV_SECTOR_BITS, &qiov,
+ count >> BDRV_SECTOR_BITS,
+ qed_co_pwrite_zeroes_cb, &cb,
QED_AIOCB_WRITE | QED_AIOCB_ZERO);
if (!blockacb) {
return -EIO;
@@ -1663,7 +1660,7 @@ static BlockDriver bdrv_qed = {
.bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
.bdrv_aio_readv = bdrv_qed_aio_readv,
.bdrv_aio_writev = bdrv_qed_aio_writev,
- .bdrv_co_write_zeroes = bdrv_qed_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = bdrv_qed_co_pwrite_zeroes,
.bdrv_truncate = bdrv_qed_truncate,
.bdrv_getlength = bdrv_qed_getlength,
.bdrv_get_info = bdrv_qed_get_info,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 15/31] raw-posix: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (13 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 14/31] qed: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 16/31] raw_bsd: " Kevin Wolf
` (16 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
[ kwolf: Fixed up trace_paio_submit_co() call for qiov == NULL ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/raw-posix.c | 34 +++++++++++++++++-----------------
trace-events | 2 +-
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index a4f5a1b..ce1cf14 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1252,8 +1252,8 @@ static int aio_worker(void *arg)
}
static int paio_submit_co(BlockDriverState *bs, int fd,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
- int type)
+ int64_t offset, QEMUIOVector *qiov,
+ int count, int type)
{
RawPosixAIOData *acb = g_new(RawPosixAIOData, 1);
ThreadPool *pool;
@@ -1262,16 +1262,16 @@ static int paio_submit_co(BlockDriverState *bs, int fd,
acb->aio_type = type;
acb->aio_fildes = fd;
- acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
- acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
+ acb->aio_nbytes = count;
+ acb->aio_offset = offset;
if (qiov) {
acb->aio_iov = qiov->iov;
acb->aio_niov = qiov->niov;
- assert(qiov->size == acb->aio_nbytes);
+ assert(qiov->size == count);
}
- trace_paio_submit_co(sector_num, nb_sectors, type);
+ trace_paio_submit_co(offset, count, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
return thread_pool_submit_co(pool, aio_worker, acb);
}
@@ -1868,17 +1868,17 @@ static coroutine_fn BlockAIOCB *raw_aio_discard(BlockDriverState *bs,
cb, opaque, QEMU_AIO_DISCARD);
}
-static int coroutine_fn raw_co_write_zeroes(
- BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags)
+static int coroutine_fn raw_co_pwrite_zeroes(
+ BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
- return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
+ return paio_submit_co(bs, s->fd, offset, NULL, count,
QEMU_AIO_WRITE_ZEROES);
} else if (s->discard_zeroes) {
- return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
+ return paio_submit_co(bs, s->fd, offset, NULL, count,
QEMU_AIO_DISCARD);
}
return -ENOTSUP;
@@ -1931,7 +1931,7 @@ BlockDriver bdrv_file = {
.bdrv_create = raw_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
.bdrv_co_get_block_status = raw_co_get_block_status,
- .bdrv_co_write_zeroes = raw_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = raw_co_pwrite_zeroes,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
@@ -2293,8 +2293,8 @@ static coroutine_fn BlockAIOCB *hdev_aio_discard(BlockDriverState *bs,
cb, opaque, QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
}
-static coroutine_fn int hdev_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
+static coroutine_fn int hdev_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
int rc;
@@ -2304,10 +2304,10 @@ static coroutine_fn int hdev_co_write_zeroes(BlockDriverState *bs,
return rc;
}
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
- return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
+ return paio_submit_co(bs, s->fd, offset, NULL, count,
QEMU_AIO_WRITE_ZEROES|QEMU_AIO_BLKDEV);
} else if (s->discard_zeroes) {
- return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
+ return paio_submit_co(bs, s->fd, offset, NULL, count,
QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
}
return -ENOTSUP;
@@ -2379,7 +2379,7 @@ static BlockDriver bdrv_host_device = {
.bdrv_reopen_abort = raw_reopen_abort,
.bdrv_create = hdev_create,
.create_opts = &raw_create_opts,
- .bdrv_co_write_zeroes = hdev_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
diff --git a/trace-events b/trace-events
index b1ca05b..421d89f 100644
--- a/trace-events
+++ b/trace-events
@@ -131,7 +131,7 @@ thread_pool_cancel(void *req, void *opaque) "req %p opaque %p"
# block/raw-win32.c
# block/raw-posix.c
-paio_submit_co(int64_t sector_num, int nb_sectors, int type) "sector_num %"PRId64" nb_sectors %d type %d"
+paio_submit_co(int64_t offset, int count, int type) "offset %"PRId64" count %d type %d"
paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d"
# ioport.c
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 16/31] raw_bsd: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (14 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 15/31] raw-posix: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 17/31] vmdk: " Kevin Wolf
` (15 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/raw_bsd.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
index d9adf90..b1d5237 100644
--- a/block/raw_bsd.c
+++ b/block/raw_bsd.c
@@ -127,12 +127,11 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
(sector_num << BDRV_SECTOR_BITS);
}
-static int coroutine_fn raw_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- BdrvRequestFlags flags)
+static int coroutine_fn raw_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count,
+ BdrvRequestFlags flags)
{
- return bdrv_co_pwrite_zeroes(bs->file->bs, sector_num << BDRV_SECTOR_BITS,
- nb_sectors << BDRV_SECTOR_BITS, flags);
+ return bdrv_co_pwrite_zeroes(bs->file->bs, offset, count, flags);
}
static int coroutine_fn raw_co_discard(BlockDriverState *bs,
@@ -253,7 +252,7 @@ BlockDriver bdrv_raw = {
.bdrv_create = &raw_create,
.bdrv_co_readv = &raw_co_readv,
.bdrv_co_writev_flags = &raw_co_writev_flags,
- .bdrv_co_write_zeroes = &raw_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = &raw_co_pwrite_zeroes,
.bdrv_co_discard = &raw_co_discard,
.bdrv_co_get_block_status = &raw_co_get_block_status,
.bdrv_truncate = &raw_truncate,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 17/31] vmdk: Convert to bdrv_co_pwrite_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (15 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 16/31] raw_bsd: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 18/31] block: Kill bdrv_co_write_zeroes() Kevin Wolf
` (14 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/vmdk.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/block/vmdk.c b/block/vmdk.c
index 5a01e16..ee09423 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1703,15 +1703,13 @@ static int vmdk_write_compressed(BlockDriverState *bs,
}
}
-static int coroutine_fn vmdk_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- BdrvRequestFlags flags)
+static int coroutine_fn vmdk_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset,
+ int bytes,
+ BdrvRequestFlags flags)
{
int ret;
BDRVVmdkState *s = bs->opaque;
- uint64_t offset = sector_num * BDRV_SECTOR_SIZE;
- uint64_t bytes = nb_sectors * BDRV_SECTOR_SIZE;
qemu_co_mutex_lock(&s->lock);
/* write zeroes could fail if sectors not aligned to cluster, test it with
@@ -2402,7 +2400,7 @@ static BlockDriver bdrv_vmdk = {
.bdrv_co_preadv = vmdk_co_preadv,
.bdrv_co_pwritev = vmdk_co_pwritev,
.bdrv_write_compressed = vmdk_write_compressed,
- .bdrv_co_write_zeroes = vmdk_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = vmdk_co_pwrite_zeroes,
.bdrv_close = vmdk_close,
.bdrv_create = vmdk_create,
.bdrv_co_flush_to_disk = vmdk_co_flush,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 18/31] block: Kill bdrv_co_write_zeroes()
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (16 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 17/31] vmdk: " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 19/31] migration/block: Convert load to BlockBackend Kevin Wolf
` (13 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
Now that all drivers have been converted to a byte interface,
we no longer need a sector interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 15 ++-------------
include/block/block_int.h | 2 --
2 files changed, 2 insertions(+), 15 deletions(-)
diff --git a/block/io.c b/block/io.c
index a426094..9dc265b 100644
--- a/block/io.c
+++ b/block/io.c
@@ -901,7 +901,7 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
goto err;
}
- if ((drv->bdrv_co_write_zeroes || drv->bdrv_co_pwrite_zeroes) &&
+ if (drv->bdrv_co_pwrite_zeroes &&
buffer_is_zero(bounce_buffer, iov.iov_len)) {
ret = bdrv_co_do_pwrite_zeroes(bs,
cluster_sector_num * BDRV_SECTOR_SIZE,
@@ -1170,16 +1170,6 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
!(bs->supported_zero_flags & BDRV_REQ_FUA)) {
need_flush = true;
}
- } else if (drv->bdrv_co_write_zeroes) {
- assert(offset % BDRV_SECTOR_SIZE == 0);
- assert(count % BDRV_SECTOR_SIZE == 0);
- ret = drv->bdrv_co_write_zeroes(bs, offset >> BDRV_SECTOR_BITS,
- num >> BDRV_SECTOR_BITS,
- flags & bs->supported_zero_flags);
- if (ret != -ENOTSUP && (flags & BDRV_REQ_FUA) &&
- !(bs->supported_zero_flags & BDRV_REQ_FUA)) {
- need_flush = true;
- }
} else {
assert(!bs->supported_zero_flags);
}
@@ -1259,8 +1249,7 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
- !(flags & BDRV_REQ_ZERO_WRITE) &&
- (drv->bdrv_co_pwrite_zeroes || drv->bdrv_co_write_zeroes) &&
+ !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_pwrite_zeroes &&
qemu_iovec_is_zero(qiov)) {
flags |= BDRV_REQ_ZERO_WRITE;
if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 1dfdf92..8a4963c 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -163,8 +163,6 @@ struct BlockDriver {
* function pointer may be NULL or return -ENOSUP and .bdrv_co_writev()
* will be called instead.
*/
- int coroutine_fn (*bdrv_co_write_zeroes)(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
int coroutine_fn (*bdrv_co_pwrite_zeroes)(BlockDriverState *bs,
int64_t offset, int count, BdrvRequestFlags flags);
int coroutine_fn (*bdrv_co_discard)(BlockDriverState *bs,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 19/31] migration/block: Convert load to BlockBackend
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (17 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 18/31] block: Kill bdrv_co_write_zeroes() Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 20/31] migration/block: Convert saving " Kevin Wolf
` (12 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This converts the loading part of block migration to use BlockBackend
interfaces rather than accessing the BlockDriverState directly.
Note that this takes a lazy shortcut. We should really use a separate
BlockBackend that is configured for the migration rather than for the
guest (e.g. writethrough caching is unnecessary) and holds its own
reference to the BlockDriverState, but the impact isn't that big and we
didn't have a separate migration reference before either, so it must be
good enough, I guess...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
migration/block.c | 26 ++++++++++----------------
1 file changed, 10 insertions(+), 16 deletions(-)
diff --git a/migration/block.c b/migration/block.c
index 16cc1f8..30af182 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -827,8 +827,7 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
int len, flags;
char device_name[256];
int64_t addr;
- BlockDriverState *bs, *bs_prev = NULL;
- BlockBackend *blk;
+ BlockBackend *blk, *blk_prev = NULL;;
Error *local_err = NULL;
uint8_t *buf;
int64_t total_sectors = 0;
@@ -853,23 +852,17 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
device_name);
return -EINVAL;
}
- bs = blk_bs(blk);
- if (!bs) {
- fprintf(stderr, "Block device %s has no medium\n",
- device_name);
- return -EINVAL;
- }
- if (bs != bs_prev) {
- bs_prev = bs;
- total_sectors = bdrv_nb_sectors(bs);
+ if (blk != blk_prev) {
+ blk_prev = blk;
+ total_sectors = blk_nb_sectors(blk);
if (total_sectors <= 0) {
error_report("Error getting length of block device %s",
device_name);
return -EINVAL;
}
- bdrv_invalidate_cache(bs, &local_err);
+ blk_invalidate_cache(blk, &local_err);
if (local_err) {
error_report_err(local_err);
return -EINVAL;
@@ -883,13 +876,14 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
}
if (flags & BLK_MIG_FLAG_ZERO_BLOCK) {
- ret = bdrv_pwrite_zeroes(bs, addr << BDRV_SECTOR_BITS,
- nr_sectors << BDRV_SECTOR_BITS,
- BDRV_REQ_MAY_UNMAP);
+ ret = blk_pwrite_zeroes(blk, addr * BDRV_SECTOR_SIZE,
+ nr_sectors * BDRV_SECTOR_SIZE,
+ BDRV_REQ_MAY_UNMAP);
} else {
buf = g_malloc(BLOCK_SIZE);
qemu_get_buffer(f, buf, BLOCK_SIZE);
- ret = bdrv_write(bs, addr, buf, nr_sectors);
+ ret = blk_pwrite(blk, addr * BDRV_SECTOR_SIZE, buf,
+ nr_sectors * BDRV_SECTOR_SIZE, 0);
g_free(buf);
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 20/31] migration/block: Convert saving to BlockBackend
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (18 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 19/31] migration/block: Convert load to BlockBackend Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 21/31] block: assert that bs->request_alignment is a power of 2 Kevin Wolf
` (11 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This creates a new BlockBackend for copying data from an images to the
migration stream on the source host. All I/O for block migration goes
through BlockBackend now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
migration/block.c | 124 ++++++++++++++++++++++++++++++++++--------------------
1 file changed, 79 insertions(+), 45 deletions(-)
diff --git a/migration/block.c b/migration/block.c
index 30af182..ebc10e6 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -52,7 +52,8 @@
typedef struct BlkMigDevState {
/* Written during setup phase. Can be read without a lock. */
- BlockDriverState *bs;
+ BlockBackend *blk;
+ char *blk_name;
int shared_base;
int64_t total_sectors;
QSIMPLEQ_ENTRY(BlkMigDevState) entry;
@@ -145,9 +146,9 @@ static void blk_send(QEMUFile *f, BlkMigBlock * blk)
| flags);
/* device name */
- len = strlen(bdrv_get_device_name(blk->bmds->bs));
+ len = strlen(blk->bmds->blk_name);
qemu_put_byte(f, len);
- qemu_put_buffer(f, (uint8_t *)bdrv_get_device_name(blk->bmds->bs), len);
+ qemu_put_buffer(f, (uint8_t *) blk->bmds->blk_name, len);
/* if a block is zero we need to flush here since the network
* bandwidth is now a lot higher than the storage device bandwidth.
@@ -201,7 +202,7 @@ static int bmds_aio_inflight(BlkMigDevState *bmds, int64_t sector)
{
int64_t chunk = sector / (int64_t)BDRV_SECTORS_PER_DIRTY_CHUNK;
- if (sector < bdrv_nb_sectors(bmds->bs)) {
+ if (sector < blk_nb_sectors(bmds->blk)) {
return !!(bmds->aio_bitmap[chunk / (sizeof(unsigned long) * 8)] &
(1UL << (chunk % (sizeof(unsigned long) * 8))));
} else {
@@ -235,10 +236,10 @@ static void bmds_set_aio_inflight(BlkMigDevState *bmds, int64_t sector_num,
static void alloc_aio_bitmap(BlkMigDevState *bmds)
{
- BlockDriverState *bs = bmds->bs;
+ BlockBackend *bb = bmds->blk;
int64_t bitmap_size;
- bitmap_size = bdrv_nb_sectors(bs) + BDRV_SECTORS_PER_DIRTY_CHUNK * 8 - 1;
+ bitmap_size = blk_nb_sectors(bb) + BDRV_SECTORS_PER_DIRTY_CHUNK * 8 - 1;
bitmap_size /= BDRV_SECTORS_PER_DIRTY_CHUNK * 8;
bmds->aio_bitmap = g_malloc0(bitmap_size);
@@ -268,19 +269,19 @@ static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
{
int64_t total_sectors = bmds->total_sectors;
int64_t cur_sector = bmds->cur_sector;
- BlockDriverState *bs = bmds->bs;
+ BlockBackend *bb = bmds->blk;
BlkMigBlock *blk;
int nr_sectors;
if (bmds->shared_base) {
qemu_mutex_lock_iothread();
- aio_context_acquire(bdrv_get_aio_context(bs));
+ aio_context_acquire(blk_get_aio_context(bb));
while (cur_sector < total_sectors &&
- !bdrv_is_allocated(bs, cur_sector, MAX_IS_ALLOCATED_SEARCH,
- &nr_sectors)) {
+ !bdrv_is_allocated(blk_bs(bb), cur_sector,
+ MAX_IS_ALLOCATED_SEARCH, &nr_sectors)) {
cur_sector += nr_sectors;
}
- aio_context_release(bdrv_get_aio_context(bs));
+ aio_context_release(blk_get_aio_context(bb));
qemu_mutex_unlock_iothread();
}
@@ -323,12 +324,12 @@ static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
* without the need to acquire the AioContext.
*/
qemu_mutex_lock_iothread();
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
- blk->aiocb = bdrv_aio_readv(bs, cur_sector, &blk->qiov,
- nr_sectors, blk_mig_read_cb, blk);
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
+ blk->aiocb = blk_aio_preadv(bb, cur_sector * BDRV_SECTOR_SIZE, &blk->qiov,
+ 0, blk_mig_read_cb, blk);
bdrv_reset_dirty_bitmap(bmds->dirty_bitmap, cur_sector, nr_sectors);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_release(blk_get_aio_context(bmds->blk));
qemu_mutex_unlock_iothread();
bmds->cur_sector = cur_sector + nr_sectors;
@@ -343,10 +344,10 @@ static int set_dirty_tracking(void)
int ret;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
- bmds->dirty_bitmap = bdrv_create_dirty_bitmap(bmds->bs, BLOCK_SIZE,
- NULL, NULL);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
+ bmds->dirty_bitmap = bdrv_create_dirty_bitmap(blk_bs(bmds->blk),
+ BLOCK_SIZE, NULL, NULL);
+ aio_context_release(blk_get_aio_context(bmds->blk));
if (!bmds->dirty_bitmap) {
ret = -errno;
goto fail;
@@ -357,9 +358,9 @@ static int set_dirty_tracking(void)
fail:
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
if (bmds->dirty_bitmap) {
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
- bdrv_release_dirty_bitmap(bmds->bs, bmds->dirty_bitmap);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
+ bdrv_release_dirty_bitmap(blk_bs(bmds->blk), bmds->dirty_bitmap);
+ aio_context_release(blk_get_aio_context(bmds->blk));
}
}
return ret;
@@ -372,9 +373,9 @@ static void unset_dirty_tracking(void)
BlkMigDevState *bmds;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
- bdrv_release_dirty_bitmap(bmds->bs, bmds->dirty_bitmap);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
+ bdrv_release_dirty_bitmap(blk_bs(bmds->blk), bmds->dirty_bitmap);
+ aio_context_release(blk_get_aio_context(bmds->blk));
}
}
@@ -384,6 +385,11 @@ static void init_blk_migration(QEMUFile *f)
BlkMigDevState *bmds;
int64_t sectors;
BdrvNextIterator it;
+ int i, num_bs = 0;
+ struct {
+ BlkMigDevState *bmds;
+ BlockDriverState *bs;
+ } *bmds_bs;
block_mig_state.submitted = 0;
block_mig_state.read_done = 0;
@@ -393,27 +399,32 @@ static void init_blk_migration(QEMUFile *f)
block_mig_state.bulk_completed = 0;
block_mig_state.zero_blocks = migrate_zero_blocks();
-
for (bs = bdrv_first(&it); bs; bs = bdrv_next(&it)) {
+ num_bs++;
+ }
+ bmds_bs = g_malloc0(num_bs * sizeof(*bmds_bs));
+
+ for (i = 0, bs = bdrv_first(&it); bs; bs = bdrv_next(&it), i++) {
if (bdrv_is_read_only(bs)) {
continue;
}
sectors = bdrv_nb_sectors(bs);
if (sectors <= 0) {
- return;
+ goto out;
}
bmds = g_new0(BlkMigDevState, 1);
- bmds->bs = bs;
+ bmds->blk = blk_new();
+ bmds->blk_name = g_strdup(bdrv_get_device_name(bs));
bmds->bulk_completed = 0;
bmds->total_sectors = sectors;
bmds->completed_sectors = 0;
bmds->shared_base = block_mig_state.shared_base;
- alloc_aio_bitmap(bmds);
- error_setg(&bmds->blocker, "block device is in use by migration");
- bdrv_op_block_all(bs, bmds->blocker);
- bdrv_ref(bs);
+
+ assert(i < num_bs);
+ bmds_bs[i].bmds = bmds;
+ bmds_bs[i].bs = bs;
block_mig_state.total_sector_sum += sectors;
@@ -426,6 +437,24 @@ static void init_blk_migration(QEMUFile *f)
QSIMPLEQ_INSERT_TAIL(&block_mig_state.bmds_list, bmds, entry);
}
+
+ /* Can only insert new BDSes now because doing so while iterating block
+ * devices may end up in a deadlock (iterating the new BDSes, too). */
+ for (i = 0; i < num_bs; i++) {
+ BlkMigDevState *bmds = bmds_bs[i].bmds;
+ BlockDriverState *bs = bmds_bs[i].bs;
+
+ if (bmds) {
+ blk_insert_bs(bmds->blk, bs);
+
+ alloc_aio_bitmap(bmds);
+ error_setg(&bmds->blocker, "block device is in use by migration");
+ bdrv_op_block_all(bs, bmds->blocker);
+ }
+ }
+
+out:
+ g_free(bmds_bs);
}
/* Called with no lock taken. */
@@ -482,6 +511,7 @@ static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
int is_async)
{
BlkMigBlock *blk;
+ BlockDriverState *bs = blk_bs(bmds->blk);
int64_t total_sectors = bmds->total_sectors;
int64_t sector;
int nr_sectors;
@@ -491,11 +521,11 @@ static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
blk_mig_lock();
if (bmds_aio_inflight(bmds, sector)) {
blk_mig_unlock();
- bdrv_drain(bmds->bs);
+ blk_drain(bmds->blk);
} else {
blk_mig_unlock();
}
- if (bdrv_get_dirty(bmds->bs, bmds->dirty_bitmap, sector)) {
+ if (bdrv_get_dirty(bs, bmds->dirty_bitmap, sector)) {
if (total_sectors - sector < BDRV_SECTORS_PER_DIRTY_CHUNK) {
nr_sectors = total_sectors - sector;
@@ -513,15 +543,18 @@ static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
blk->iov.iov_len = nr_sectors * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&blk->qiov, &blk->iov, 1);
- blk->aiocb = bdrv_aio_readv(bmds->bs, sector, &blk->qiov,
- nr_sectors, blk_mig_read_cb, blk);
+ blk->aiocb = blk_aio_preadv(bmds->blk,
+ sector * BDRV_SECTOR_SIZE,
+ &blk->qiov, 0, blk_mig_read_cb,
+ blk);
blk_mig_lock();
block_mig_state.submitted++;
bmds_set_aio_inflight(bmds, sector, nr_sectors, 1);
blk_mig_unlock();
} else {
- ret = bdrv_read(bmds->bs, sector, blk->buf, nr_sectors);
+ ret = blk_pread(bmds->blk, sector * BDRV_SECTOR_SIZE, blk->buf,
+ nr_sectors * BDRV_SECTOR_SIZE);
if (ret < 0) {
goto error;
}
@@ -559,9 +592,9 @@ static int blk_mig_save_dirty_block(QEMUFile *f, int is_async)
int ret = 1;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
ret = mig_save_device_dirty(f, bmds, is_async);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_release(blk_get_aio_context(bmds->blk));
if (ret <= 0) {
break;
}
@@ -619,9 +652,9 @@ static int64_t get_remaining_dirty(void)
int64_t dirty = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
- aio_context_acquire(bdrv_get_aio_context(bmds->bs));
+ aio_context_acquire(blk_get_aio_context(bmds->blk));
dirty += bdrv_get_dirty_count(bmds->dirty_bitmap);
- aio_context_release(bdrv_get_aio_context(bmds->bs));
+ aio_context_release(blk_get_aio_context(bmds->blk));
}
return dirty << BDRV_SECTOR_BITS;
@@ -641,15 +674,16 @@ static void block_migration_cleanup(void *opaque)
while ((bmds = QSIMPLEQ_FIRST(&block_mig_state.bmds_list)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&block_mig_state.bmds_list, entry);
- bdrv_op_unblock_all(bmds->bs, bmds->blocker);
+ bdrv_op_unblock_all(blk_bs(bmds->blk), bmds->blocker);
error_free(bmds->blocker);
- /* Save ctx, because bmds->bs can disappear during bdrv_unref. */
- ctx = bdrv_get_aio_context(bmds->bs);
+ /* Save ctx, because bmds->blk can disappear during blk_unref. */
+ ctx = blk_get_aio_context(bmds->blk);
aio_context_acquire(ctx);
- bdrv_unref(bmds->bs);
+ blk_unref(bmds->blk);
aio_context_release(ctx);
+ g_free(bmds->blk_name);
g_free(bmds->aio_bitmap);
g_free(bmds);
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 21/31] block: assert that bs->request_alignment is a power of 2
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (19 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 20/31] migration/block: Convert saving " Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 22/31] raw-posix: Fetch max sectors for host block device Kevin Wolf
` (10 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Peter Lieven <pl@kamp.de>
at least bdrv_co_preadv/pwritev expect this.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block.c b/block.c
index 736432f..f54bc25 100644
--- a/block.c
+++ b/block.c
@@ -1018,7 +1018,7 @@ static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
assert(bdrv_opt_mem_align(bs) != 0);
assert(bdrv_min_mem_align(bs) != 0);
- assert((bs->request_alignment != 0) || bdrv_is_sg(bs));
+ assert(is_power_of_2(bs->request_alignment) || bdrv_is_sg(bs));
qemu_opts_del(opts);
return 0;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 22/31] raw-posix: Fetch max sectors for host block device
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (20 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 21/31] block: assert that bs->request_alignment is a power of 2 Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 23/31] qcow2: avoid extra flushes in qcow2 Kevin Wolf
` (9 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Fam Zheng <famz@redhat.com>
This is sometimes a useful value we should count in.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/raw-posix.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index ce1cf14..ce2e20f 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -729,9 +729,33 @@ static void raw_reopen_abort(BDRVReopenState *state)
state->opaque = NULL;
}
+static int hdev_get_max_transfer_length(int fd)
+{
+#ifdef BLKSECTGET
+ int max_sectors = 0;
+ if (ioctl(fd, BLKSECTGET, &max_sectors) == 0) {
+ return max_sectors;
+ } else {
+ return -errno;
+ }
+#else
+ return -ENOSYS;
+#endif
+}
+
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVRawState *s = bs->opaque;
+ struct stat st;
+
+ if (!fstat(s->fd, &st)) {
+ if (S_ISBLK(st.st_mode)) {
+ int ret = hdev_get_max_transfer_length(s->fd);
+ if (ret >= 0) {
+ bs->bl.max_transfer_length = ret;
+ }
+ }
+ }
raw_probe_alignment(bs, s->fd, errp);
bs->bl.min_mem_alignment = s->buf_align;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 23/31] qcow2: avoid extra flushes in qcow2
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (21 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 22/31] raw-posix: Fetch max sectors for host block device Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 24/31] block: Fix bdrv_all_delete_snapshot() error handling Kevin Wolf
` (8 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: "Denis V. Lunev" <den@openvz.org>
The problem with excessive flushing was found by a couple of performance
tests:
- parallel directory tree creation (from 2 processes)
- 32 cached writes + fsync at the end in a loop
For the first one results improved from 2.6 loops/sec to 3.5 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
For the second one results improved from ~600 fsync/sec to ~1100
fsync/sec. Though, it was run on SSD so it probably won't show such
performance gain on rotational media.
qcow2_cache_flush() calls bdrv_flush() unconditionally after writing
cache entries of a particular cache. This can lead to as many as
2 additional fdatasyncs inside bdrv_flush.
We can simply skip all fdatasync calls inside qcow2_co_flush_to_os
as bdrv_flush for sure will do the job. These flushes are necessary to
keep the right order of writes to the different caches. Though this is
not necessary in the current code base as this ordering is ensured through
the flush in qcow2_cache_flush_dependency().
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Pavel Borzenkov <pborzenkov@virtuozzo.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2-cache.c | 11 +++++++++--
block/qcow2.c | 4 ++--
block/qcow2.h | 1 +
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/block/qcow2-cache.c b/block/qcow2-cache.c
index 0fe8eda..208a060 100644
--- a/block/qcow2-cache.c
+++ b/block/qcow2-cache.c
@@ -226,7 +226,7 @@ static int qcow2_cache_entry_flush(BlockDriverState *bs, Qcow2Cache *c, int i)
return 0;
}
-int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c)
+int qcow2_cache_write(BlockDriverState *bs, Qcow2Cache *c)
{
BDRVQcow2State *s = bs->opaque;
int result = 0;
@@ -242,8 +242,15 @@ int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c)
}
}
+ return result;
+}
+
+int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c)
+{
+ int result = qcow2_cache_write(bs, c);
+
if (result == 0) {
- ret = bdrv_flush(bs->file->bs);
+ int ret = bdrv_flush(bs->file->bs);
if (ret < 0) {
result = ret;
}
diff --git a/block/qcow2.c b/block/qcow2.c
index 5e26c3d..6f5fb81 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2813,14 +2813,14 @@ static coroutine_fn int qcow2_co_flush_to_os(BlockDriverState *bs)
int ret;
qemu_co_mutex_lock(&s->lock);
- ret = qcow2_cache_flush(bs, s->l2_table_cache);
+ ret = qcow2_cache_write(bs, s->l2_table_cache);
if (ret < 0) {
qemu_co_mutex_unlock(&s->lock);
return ret;
}
if (qcow2_need_accurate_refcounts(s)) {
- ret = qcow2_cache_flush(bs, s->refcount_block_cache);
+ ret = qcow2_cache_write(bs, s->refcount_block_cache);
if (ret < 0) {
qemu_co_mutex_unlock(&s->lock);
return ret;
diff --git a/block/qcow2.h b/block/qcow2.h
index a063a3c..7db9795 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -583,6 +583,7 @@ int qcow2_cache_destroy(BlockDriverState* bs, Qcow2Cache *c);
void qcow2_cache_entry_mark_dirty(BlockDriverState *bs, Qcow2Cache *c,
void *table);
int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c);
+int qcow2_cache_write(BlockDriverState *bs, Qcow2Cache *c);
int qcow2_cache_set_dependency(BlockDriverState *bs, Qcow2Cache *c,
Qcow2Cache *dependency);
void qcow2_cache_depends_on_flush(Qcow2Cache *c);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 24/31] block: Fix bdrv_all_delete_snapshot() error handling
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (22 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 23/31] qcow2: avoid extra flushes in qcow2 Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 25/31] blockdev: clean up error handling in do_open_tray Kevin Wolf
` (7 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
The code to exit the loop after bdrv_snapshot_delete_by_id_or_name()
returned failure was duplicated. The first copy of it was too early so
that the AioContext lock would not be freed. This patch removes it so
that only the second, correct copy remains.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/snapshot.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/block/snapshot.c b/block/snapshot.c
index 6e6e34f..da89d2b 100644
--- a/block/snapshot.c
+++ b/block/snapshot.c
@@ -409,9 +409,6 @@ int bdrv_all_delete_snapshot(const char *name, BlockDriverState **first_bad_bs,
if (bdrv_can_snapshot(bs) &&
bdrv_snapshot_find(bs, snapshot, name) >= 0) {
ret = bdrv_snapshot_delete_by_id_or_name(bs, name, err);
- if (ret < 0) {
- goto fail;
- }
}
aio_context_release(ctx);
if (ret < 0) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 25/31] blockdev: clean up error handling in do_open_tray
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (23 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 24/31] block: Fix bdrv_all_delete_snapshot() error handling Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 26/31] block: Don't emulate natively supported pwritev flags Kevin Wolf
` (6 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Colin Lord <clord@redhat.com>
Returns negative error codes and accompanying error messages in cases where
the device has no tray or the tray is locked and isn't forced open. This
extra information should result in better flexibility in functions that
call do_open_tray.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
blockdev.c | 46 ++++++++++++++++++++++++++++------------------
1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 6ccb8e1..7fd515a 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -56,6 +56,8 @@
static QTAILQ_HEAD(, BlockDriverState) monitor_bdrv_states =
QTAILQ_HEAD_INITIALIZER(monitor_bdrv_states);
+static int do_open_tray(const char *device, bool force, Error **errp);
+
static const char *const if_name[IF_COUNT] = {
[IF_NONE] = "none",
[IF_IDE] = "ide",
@@ -2274,8 +2276,6 @@ exit:
block_job_txn_unref(block_job_txn);
}
-static int do_open_tray(const char *device, bool force, Error **errp);
-
void qmp_eject(const char *device, bool has_force, bool force, Error **errp)
{
Error *local_err = NULL;
@@ -2286,16 +2286,11 @@ void qmp_eject(const char *device, bool has_force, bool force, Error **errp)
}
rc = do_open_tray(device, force, &local_err);
- if (local_err) {
+ if (rc && rc != -ENOSYS) {
error_propagate(errp, local_err);
return;
}
-
- if (rc == EINPROGRESS) {
- error_setg(errp, "Device '%s' is locked and force was not specified, "
- "wait for tray to open and try again", device);
- return;
- }
+ error_free(local_err);
qmp_x_blockdev_remove_medium(device, errp);
}
@@ -2324,11 +2319,16 @@ void qmp_block_passwd(bool has_device, const char *device,
aio_context_release(aio_context);
}
-/**
- * returns -errno on fatal error, +errno for non-fatal situations.
- * errp will always be set when the return code is negative.
- * May return +ENOSYS if the device has no tray,
- * or +EINPROGRESS if the tray is locked and the guest has been notified.
+/*
+ * Attempt to open the tray of @device.
+ * If @force, ignore its tray lock.
+ * Else, if the tray is locked, don't open it, but ask the guest to open it.
+ * On error, store an error through @errp and return -errno.
+ * If @device does not exist, return -ENODEV.
+ * If it has no removable media, return -ENOTSUP.
+ * If it has no tray, return -ENOSYS.
+ * If the guest was asked to open the tray, return -EINPROGRESS.
+ * Else, return 0.
*/
static int do_open_tray(const char *device, bool force, Error **errp)
{
@@ -2348,8 +2348,8 @@ static int do_open_tray(const char *device, bool force, Error **errp)
}
if (!blk_dev_has_tray(blk)) {
- /* Ignore this command on tray-less devices */
- return ENOSYS;
+ error_setg(errp, "Device '%s' does not have a tray", device);
+ return -ENOSYS;
}
if (blk_dev_is_tray_open(blk)) {
@@ -2366,7 +2366,9 @@ static int do_open_tray(const char *device, bool force, Error **errp)
}
if (locked && !force) {
- return EINPROGRESS;
+ error_setg(errp, "Device '%s' is locked and force was not specified, "
+ "wait for tray to open and try again", device);
+ return -EINPROGRESS;
}
return 0;
@@ -2375,10 +2377,18 @@ static int do_open_tray(const char *device, bool force, Error **errp)
void qmp_blockdev_open_tray(const char *device, bool has_force, bool force,
Error **errp)
{
+ Error *local_err = NULL;
+ int rc;
+
if (!has_force) {
force = false;
}
- do_open_tray(device, force, errp);
+ rc = do_open_tray(device, force, &local_err);
+ if (rc && rc != -ENOSYS && rc != -EINPROGRESS) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ error_free(local_err);
}
void qmp_blockdev_close_tray(const char *device, Error **errp)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 26/31] block: Don't emulate natively supported pwritev flags
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (24 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 25/31] blockdev: clean up error handling in do_open_tray Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 27/31] qemu-img bench Kevin Wolf
` (5 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
Drivers that implement .bdrv_co_pwritev() get the flags passed as an
argument to said function, but we also unconditionally emulate the flags
anyway. We shouldn't do that.
Fix this by clearing all flags that the driver supports natively after
it returns from .bdrv_co_pwritev().
Fixes: 4df863f3 ('block: Make supported_write_flags a per-bds property')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
block/io.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/io.c b/block/io.c
index 9dc265b..fb99a71 100644
--- a/block/io.c
+++ b/block/io.c
@@ -816,7 +816,9 @@ static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
int ret;
if (drv->bdrv_co_pwritev) {
- ret = drv->bdrv_co_pwritev(bs, offset, bytes, qiov, flags);
+ ret = drv->bdrv_co_pwritev(bs, offset, bytes, qiov,
+ flags & bs->supported_write_flags);
+ flags &= ~bs->supported_write_flags;
goto emulate_flags;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 27/31] qemu-img bench
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (25 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 26/31] block: Don't emulate natively supported pwritev flags Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 28/31] qemu-img bench: Sequential writes Kevin Wolf
` (4 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This adds a qemu-img command that allows doing some simple benchmarks
for the block layer without involving guest devices and a real VM.
For the start, this implements only a test of sequential reads.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
qemu-img-cmds.hx | 6 ++
qemu-img.c | 190 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
qemu-img.texi | 10 +++
3 files changed, 206 insertions(+)
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index e7cded6..f3bd546 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -9,6 +9,12 @@ STEXI
@table @option
ETEXI
+DEF("bench", img_bench,
+ "bench [-c count] [-d depth] [-f fmt] [-n] [-q] [-s buffer_size] [-t cache] filename")
+STEXI
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-q] [-s @var{buffer_size}] [-t @var{cache}] @var{filename}
+ETEXI
+
DEF("check", img_check,
"check [-q] [--object objectdef] [--image-opts] [-f fmt] [--output=ofmt] [-r [leaks | all]] [-T src_cache] filename")
STEXI
diff --git a/qemu-img.c b/qemu-img.c
index 4b56ad3..d471d10 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -3459,6 +3459,196 @@ out_no_progress:
return 0;
}
+typedef struct BenchData {
+ BlockBackend *blk;
+ uint64_t image_size;
+ int bufsize;
+ int nrreq;
+ int n;
+ uint8_t *buf;
+ QEMUIOVector *qiov;
+
+ int in_flight;
+ uint64_t offset;
+} BenchData;
+
+static void bench_cb(void *opaque, int ret)
+{
+ BenchData *b = opaque;
+ BlockAIOCB *acb;
+
+ if (ret < 0) {
+ error_report("Failed request: %s\n", strerror(-ret));
+ exit(EXIT_FAILURE);
+ }
+ if (b->in_flight > 0) {
+ b->n--;
+ b->in_flight--;
+ }
+
+ while (b->n > b->in_flight && b->in_flight < b->nrreq) {
+ acb = blk_aio_preadv(b->blk, b->offset, b->qiov, 0,
+ bench_cb, b);
+ if (!acb) {
+ error_report("Failed to issue request");
+ exit(EXIT_FAILURE);
+ }
+ b->in_flight++;
+ b->offset += b->bufsize;
+ b->offset %= b->image_size;
+ }
+}
+
+static int img_bench(int argc, char **argv)
+{
+ int c, ret = 0;
+ const char *fmt = NULL, *filename;
+ bool quiet = false;
+ bool image_opts = false;
+ int count = 75000;
+ int depth = 64;
+ size_t bufsize = 4096;
+ int64_t image_size;
+ BlockBackend *blk = NULL;
+ BenchData data = {};
+ int flags = 0;
+ bool writethrough;
+ struct timeval t1, t2;
+ int i;
+
+ for (;;) {
+ static const struct option long_options[] = {
+ {"help", no_argument, 0, 'h'},
+ {"image-opts", no_argument, 0, OPTION_IMAGE_OPTS},
+ {0, 0, 0, 0}
+ };
+ c = getopt_long(argc, argv, "hc:d:f:nqs:t:", long_options, NULL);
+ if (c == -1) {
+ break;
+ }
+
+ switch (c) {
+ case 'h':
+ case '?':
+ help();
+ break;
+ case 'c':
+ {
+ char *end;
+ errno = 0;
+ count = strtoul(optarg, &end, 0);
+ if (errno || *end || count > INT_MAX) {
+ error_report("Invalid request count specified");
+ return 1;
+ }
+ break;
+ }
+ case 'd':
+ {
+ char *end;
+ errno = 0;
+ depth = strtoul(optarg, &end, 0);
+ if (errno || *end || depth > INT_MAX) {
+ error_report("Invalid queue depth specified");
+ return 1;
+ }
+ break;
+ }
+ case 'f':
+ fmt = optarg;
+ break;
+ case 'n':
+ flags |= BDRV_O_NATIVE_AIO;
+ break;
+ case 'q':
+ quiet = true;
+ break;
+ case 's':
+ {
+ int64_t sval;
+ char *end;
+
+ sval = qemu_strtosz_suffix(optarg, &end, QEMU_STRTOSZ_DEFSUFFIX_B);
+ if (sval < 0 || sval > INT_MAX || *end) {
+ error_report("Invalid buffer size specified");
+ return 1;
+ }
+
+ bufsize = sval;
+ break;
+ }
+ case 't':
+ ret = bdrv_parse_cache_mode(optarg, &flags, &writethrough);
+ if (ret < 0) {
+ error_report("Invalid cache mode");
+ ret = -1;
+ goto out;
+ }
+ break;
+ case OPTION_IMAGE_OPTS:
+ image_opts = true;
+ break;
+ }
+ }
+
+ if (optind != argc - 1) {
+ error_exit("Expecting one image file name");
+ }
+ filename = argv[argc - 1];
+
+ blk = img_open(image_opts, filename, fmt, flags, writethrough, quiet);
+ if (!blk) {
+ ret = -1;
+ goto out;
+ }
+
+ image_size = blk_getlength(blk);
+ if (image_size < 0) {
+ ret = image_size;
+ goto out;
+ }
+
+ data = (BenchData) {
+ .blk = blk,
+ .image_size = image_size,
+ .bufsize = bufsize,
+ .nrreq = depth,
+ .n = count,
+ };
+ printf("Sending %d requests, %d bytes each, %d in parallel\n",
+ data.n, data.bufsize, data.nrreq);
+
+ data.buf = blk_blockalign(blk, data.nrreq * data.bufsize);
+ data.qiov = g_new(QEMUIOVector, data.nrreq);
+ for (i = 0; i < data.nrreq; i++) {
+ qemu_iovec_init(&data.qiov[i], 1);
+ qemu_iovec_add(&data.qiov[i],
+ data.buf + i * data.bufsize, data.bufsize);
+ }
+
+ gettimeofday(&t1, NULL);
+ bench_cb(&data, 0);
+
+ while (data.n > 0) {
+ main_loop_wait(false);
+ }
+ gettimeofday(&t2, NULL);
+
+ printf("Run completed in %3.3f seconds.\n",
+ (t2.tv_sec - t1.tv_sec)
+ + ((double)(t2.tv_usec - t1.tv_usec) / 1000000));
+
+out:
+ qemu_vfree(data.buf);
+ blk_unref(blk);
+
+ if (ret) {
+ return 1;
+ }
+ return 0;
+}
+
+
static const img_cmd_t img_cmds[] = {
#define DEF(option, callback, arg_string) \
{ option, callback },
diff --git a/qemu-img.texi b/qemu-img.texi
index afaebdd..b6b28e3 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -131,6 +131,16 @@ Skip the creation of the target volume
Command description:
@table @option
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-q] [-s @var{buffer_size}] [-t @var{cache}] @var{filename}
+
+Run a simple sequential read benchmark on the specified image. A total number
+of @var{count} I/O requests is performed, each @var{buffer_size} bytes in size,
+and with @var{depth} requests in parallel.
+
+If @code{-n} is specified, the native AIO backend is used if possible. On
+Linux, this option only works if @code{-t none} or @code{-t directsync} is
+specified as well.
+
@item check [-f @var{fmt}] [--output=@var{ofmt}] [-r [leaks | all]] [-T @var{src_cache}] @var{filename}
Perform a consistency check on the disk image @var{filename}. The command can
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 28/31] qemu-img bench: Sequential writes
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (26 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 27/31] qemu-img bench Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 29/31] qemu-img bench: Make start offset configurable Kevin Wolf
` (3 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This extends qemu-img bench with an option that makes it use sequential
writes instead of reads for the test run.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
qemu-img-cmds.hx | 4 ++--
qemu-img.c | 38 +++++++++++++++++++++++++++++++++-----
qemu-img.texi | 13 +++++++++----
3 files changed, 44 insertions(+), 11 deletions(-)
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index f3bd546..baca85e 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -10,9 +10,9 @@ STEXI
ETEXI
DEF("bench", img_bench,
- "bench [-c count] [-d depth] [-f fmt] [-n] [-q] [-s buffer_size] [-t cache] filename")
+ "bench [-c count] [-d depth] [-f fmt] [-n] [--pattern=pattern] [-q] [-s buffer_size] [-t cache] [-w] filename")
STEXI
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-q] [-s @var{buffer_size}] [-t @var{cache}] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
ETEXI
DEF("check", img_check,
diff --git a/qemu-img.c b/qemu-img.c
index d471d10..85d1353 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -53,6 +53,7 @@ enum {
OPTION_BACKING_CHAIN = 257,
OPTION_OBJECT = 258,
OPTION_IMAGE_OPTS = 259,
+ OPTION_PATTERN = 260,
};
typedef enum OutputFormat {
@@ -3462,6 +3463,7 @@ out_no_progress:
typedef struct BenchData {
BlockBackend *blk;
uint64_t image_size;
+ bool write;
int bufsize;
int nrreq;
int n;
@@ -3487,8 +3489,13 @@ static void bench_cb(void *opaque, int ret)
}
while (b->n > b->in_flight && b->in_flight < b->nrreq) {
- acb = blk_aio_preadv(b->blk, b->offset, b->qiov, 0,
- bench_cb, b);
+ if (b->write) {
+ acb = blk_aio_pwritev(b->blk, b->offset, b->qiov, 0,
+ bench_cb, b);
+ } else {
+ acb = blk_aio_preadv(b->blk, b->offset, b->qiov, 0,
+ bench_cb, b);
+ }
if (!acb) {
error_report("Failed to issue request");
exit(EXIT_FAILURE);
@@ -3505,9 +3512,11 @@ static int img_bench(int argc, char **argv)
const char *fmt = NULL, *filename;
bool quiet = false;
bool image_opts = false;
+ bool is_write = false;
int count = 75000;
int depth = 64;
size_t bufsize = 4096;
+ int pattern = 0;
int64_t image_size;
BlockBackend *blk = NULL;
BenchData data = {};
@@ -3520,9 +3529,10 @@ static int img_bench(int argc, char **argv)
static const struct option long_options[] = {
{"help", no_argument, 0, 'h'},
{"image-opts", no_argument, 0, OPTION_IMAGE_OPTS},
+ {"pattern", required_argument, 0, OPTION_PATTERN},
{0, 0, 0, 0}
};
- c = getopt_long(argc, argv, "hc:d:f:nqs:t:", long_options, NULL);
+ c = getopt_long(argc, argv, "hc:d:f:nqs:t:w", long_options, NULL);
if (c == -1) {
break;
}
@@ -3585,6 +3595,21 @@ static int img_bench(int argc, char **argv)
goto out;
}
break;
+ case 'w':
+ flags |= BDRV_O_RDWR;
+ is_write = true;
+ break;
+ case OPTION_PATTERN:
+ {
+ char *end;
+ errno = 0;
+ pattern = strtoul(optarg, &end, 0);
+ if (errno || *end || pattern > 0xff) {
+ error_report("Invalid pattern byte specified");
+ return 1;
+ }
+ break;
+ }
case OPTION_IMAGE_OPTS:
image_opts = true;
break;
@@ -3614,11 +3639,14 @@ static int img_bench(int argc, char **argv)
.bufsize = bufsize,
.nrreq = depth,
.n = count,
+ .write = is_write,
};
- printf("Sending %d requests, %d bytes each, %d in parallel\n",
- data.n, data.bufsize, data.nrreq);
+ printf("Sending %d %s requests, %d bytes each, %d in parallel\n",
+ data.n, data.write ? "write" : "read", data.bufsize, data.nrreq);
data.buf = blk_blockalign(blk, data.nrreq * data.bufsize);
+ memset(data.buf, pattern, data.nrreq * data.bufsize);
+
data.qiov = g_new(QEMUIOVector, data.nrreq);
for (i = 0; i < data.nrreq; i++) {
qemu_iovec_init(&data.qiov[i], 1);
diff --git a/qemu-img.texi b/qemu-img.texi
index b6b28e3..c477fbf 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -131,16 +131,21 @@ Skip the creation of the target volume
Command description:
@table @option
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-q] [-s @var{buffer_size}] [-t @var{cache}] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
-Run a simple sequential read benchmark on the specified image. A total number
-of @var{count} I/O requests is performed, each @var{buffer_size} bytes in size,
-and with @var{depth} requests in parallel.
+Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
+specified, a write test is performed, otherwise a read test is performed.
+
+A total number of @var{count} I/O requests is performed, each @var{buffer_size}
+bytes in size, and with @var{depth} requests in parallel.
If @code{-n} is specified, the native AIO backend is used if possible. On
Linux, this option only works if @code{-t none} or @code{-t directsync} is
specified as well.
+For write tests, by default a buffer filled with zeros is written. This can be
+overridden with a pattern byte specified by @var{pattern}.
+
@item check [-f @var{fmt}] [--output=@var{ofmt}] [-r [leaks | all]] [-T @var{src_cache}] @var{filename}
Perform a consistency check on the disk image @var{filename}. The command can
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 29/31] qemu-img bench: Make start offset configurable
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (27 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 28/31] qemu-img bench: Sequential writes Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 30/31] qemu-img bench: Implement -S (step size) Kevin Wolf
` (2 subsequent siblings)
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This patch adds an option the specify the offset of the first request
made by qemu-img bench. This allows to benchmark misaligned requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
qemu-img-cmds.hx | 4 ++--
qemu-img.c | 23 ++++++++++++++++++++---
qemu-img.texi | 5 +++--
3 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index baca85e..117d0f9 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -10,9 +10,9 @@ STEXI
ETEXI
DEF("bench", img_bench,
- "bench [-c count] [-d depth] [-f fmt] [-n] [--pattern=pattern] [-q] [-s buffer_size] [-t cache] [-w] filename")
+ "bench [-c count] [-d depth] [-f fmt] [-n] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-t cache] [-w] filename")
STEXI
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
ETEXI
DEF("check", img_check,
diff --git a/qemu-img.c b/qemu-img.c
index 85d1353..480ef8d 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -3515,6 +3515,7 @@ static int img_bench(int argc, char **argv)
bool is_write = false;
int count = 75000;
int depth = 64;
+ int64_t offset = 0;
size_t bufsize = 4096;
int pattern = 0;
int64_t image_size;
@@ -3532,7 +3533,7 @@ static int img_bench(int argc, char **argv)
{"pattern", required_argument, 0, OPTION_PATTERN},
{0, 0, 0, 0}
};
- c = getopt_long(argc, argv, "hc:d:f:nqs:t:w", long_options, NULL);
+ c = getopt_long(argc, argv, "hc:d:f:no:qs:t:w", long_options, NULL);
if (c == -1) {
break;
}
@@ -3570,6 +3571,19 @@ static int img_bench(int argc, char **argv)
case 'n':
flags |= BDRV_O_NATIVE_AIO;
break;
+ case 'o':
+ {
+ char *end;
+ errno = 0;
+ offset = qemu_strtosz_suffix(optarg, &end,
+ QEMU_STRTOSZ_DEFSUFFIX_B);
+ if (offset < 0|| *end) {
+ error_report("Invalid offset specified");
+ return 1;
+ }
+ break;
+ }
+ break;
case 'q':
quiet = true;
break;
@@ -3639,10 +3653,13 @@ static int img_bench(int argc, char **argv)
.bufsize = bufsize,
.nrreq = depth,
.n = count,
+ .offset = offset,
.write = is_write,
};
- printf("Sending %d %s requests, %d bytes each, %d in parallel\n",
- data.n, data.write ? "write" : "read", data.bufsize, data.nrreq);
+ printf("Sending %d %s requests, %d bytes each, %d in parallel "
+ "(starting at offset %" PRId64 ")\n",
+ data.n, data.write ? "write" : "read", data.bufsize, data.nrreq,
+ data.offset);
data.buf = blk_blockalign(blk, data.nrreq * data.bufsize);
memset(data.buf, pattern, data.nrreq * data.bufsize);
diff --git a/qemu-img.texi b/qemu-img.texi
index c477fbf..9bffad2 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -131,13 +131,14 @@ Skip the creation of the target volume
Command description:
@table @option
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
specified, a write test is performed, otherwise a read test is performed.
A total number of @var{count} I/O requests is performed, each @var{buffer_size}
-bytes in size, and with @var{depth} requests in parallel.
+bytes in size, and with @var{depth} requests in parallel. The first request
+starts at the position given by @var{offset}.
If @code{-n} is specified, the native AIO backend is used if possible. On
Linux, this option only works if @code{-t none} or @code{-t directsync} is
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 30/31] qemu-img bench: Implement -S (step size)
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (28 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 29/31] qemu-img bench: Make start offset configurable Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 31/31] qemu-img bench: Add --flush-interval Kevin Wolf
2016-06-08 17:27 ` [Qemu-devel] [PULL 00/31] Block layer patches Peter Maydell
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
With this new option, qemu-img bench can be told to advance the current
offset after each request by a different value than the buffer size.
This is useful for controlling the conditions for cluster allocation in
image formats (e.g. qcow2 cluster allocation with COW in front of the
request, or COW areas that aren't overwritten immediately).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
qemu-img-cmds.hx | 4 ++--
qemu-img.c | 25 +++++++++++++++++++++----
qemu-img.texi | 6 ++++--
3 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index 117d0f9..05a2991 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -10,9 +10,9 @@ STEXI
ETEXI
DEF("bench", img_bench,
- "bench [-c count] [-d depth] [-f fmt] [-n] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-t cache] [-w] filename")
+ "bench [-c count] [-d depth] [-f fmt] [-n] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-S step_size] [-t cache] [-w] filename")
STEXI
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
ETEXI
DEF("check", img_check,
diff --git a/qemu-img.c b/qemu-img.c
index 480ef8d..c5e2638 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -3465,6 +3465,7 @@ typedef struct BenchData {
uint64_t image_size;
bool write;
int bufsize;
+ int step;
int nrreq;
int n;
uint8_t *buf;
@@ -3501,7 +3502,7 @@ static void bench_cb(void *opaque, int ret)
exit(EXIT_FAILURE);
}
b->in_flight++;
- b->offset += b->bufsize;
+ b->offset += b->step;
b->offset %= b->image_size;
}
}
@@ -3518,6 +3519,7 @@ static int img_bench(int argc, char **argv)
int64_t offset = 0;
size_t bufsize = 4096;
int pattern = 0;
+ size_t step = 0;
int64_t image_size;
BlockBackend *blk = NULL;
BenchData data = {};
@@ -3533,7 +3535,7 @@ static int img_bench(int argc, char **argv)
{"pattern", required_argument, 0, OPTION_PATTERN},
{0, 0, 0, 0}
};
- c = getopt_long(argc, argv, "hc:d:f:no:qs:t:w", long_options, NULL);
+ c = getopt_long(argc, argv, "hc:d:f:no:qs:S:t:w", long_options, NULL);
if (c == -1) {
break;
}
@@ -3601,6 +3603,20 @@ static int img_bench(int argc, char **argv)
bufsize = sval;
break;
}
+ case 'S':
+ {
+ int64_t sval;
+ char *end;
+
+ sval = qemu_strtosz_suffix(optarg, &end, QEMU_STRTOSZ_DEFSUFFIX_B);
+ if (sval < 0 || sval > INT_MAX || *end) {
+ error_report("Invalid step size specified");
+ return 1;
+ }
+
+ step = sval;
+ break;
+ }
case 't':
ret = bdrv_parse_cache_mode(optarg, &flags, &writethrough);
if (ret < 0) {
@@ -3651,15 +3667,16 @@ static int img_bench(int argc, char **argv)
.blk = blk,
.image_size = image_size,
.bufsize = bufsize,
+ .step = step ?: bufsize,
.nrreq = depth,
.n = count,
.offset = offset,
.write = is_write,
};
printf("Sending %d %s requests, %d bytes each, %d in parallel "
- "(starting at offset %" PRId64 ")\n",
+ "(starting at offset %" PRId64 ", step size %d)\n",
data.n, data.write ? "write" : "read", data.bufsize, data.nrreq,
- data.offset);
+ data.offset, data.step);
data.buf = blk_blockalign(blk, data.nrreq * data.bufsize);
memset(data.buf, pattern, data.nrreq * data.bufsize);
diff --git a/qemu-img.texi b/qemu-img.texi
index 9bffad2..ccc0b51 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -131,14 +131,16 @@ Skip the creation of the target volume
Command description:
@table @option
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
specified, a write test is performed, otherwise a read test is performed.
A total number of @var{count} I/O requests is performed, each @var{buffer_size}
bytes in size, and with @var{depth} requests in parallel. The first request
-starts at the position given by @var{offset}.
+starts at the position given by @var{offset}, each following request increases
+the current position by @var{step_size}. If @var{step_size} is not given,
+@var{buffer_size} is used for its value.
If @code{-n} is specified, the native AIO backend is used if possible. On
Linux, this option only works if @code{-t none} or @code{-t directsync} is
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 31/31] qemu-img bench: Add --flush-interval
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (29 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 30/31] qemu-img bench: Implement -S (step size) Kevin Wolf
@ 2016-06-08 9:16 ` Kevin Wolf
2016-06-08 17:27 ` [Qemu-devel] [PULL 00/31] Block layer patches Peter Maydell
31 siblings, 0 replies; 37+ messages in thread
From: Kevin Wolf @ 2016-06-08 9:16 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
This options allows to flush the image periodically during write tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
qemu-img-cmds.hx | 4 +--
qemu-img.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++------
qemu-img.texi | 8 ++++-
3 files changed, 95 insertions(+), 12 deletions(-)
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index 05a2991..7e95b2d 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -10,9 +10,9 @@ STEXI
ETEXI
DEF("bench", img_bench,
- "bench [-c count] [-d depth] [-f fmt] [-n] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-S step_size] [-t cache] [-w] filename")
+ "bench [-c count] [-d depth] [-f fmt] [--flush-interval=flush_interval] [-n] [--no-drain] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-S step_size] [-t cache] [-w] filename")
STEXI
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
ETEXI
DEF("check", img_check,
diff --git a/qemu-img.c b/qemu-img.c
index c5e2638..04cddab 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -54,6 +54,8 @@ enum {
OPTION_OBJECT = 258,
OPTION_IMAGE_OPTS = 259,
OPTION_PATTERN = 260,
+ OPTION_FLUSH_INTERVAL = 261,
+ OPTION_NO_DRAIN = 262,
};
typedef enum OutputFormat {
@@ -3468,13 +3470,24 @@ typedef struct BenchData {
int step;
int nrreq;
int n;
+ int flush_interval;
+ bool drain_on_flush;
uint8_t *buf;
QEMUIOVector *qiov;
int in_flight;
+ bool in_flush;
uint64_t offset;
} BenchData;
+static void bench_undrained_flush_cb(void *opaque, int ret)
+{
+ if (ret < 0) {
+ error_report("Failed flush request: %s\n", strerror(-ret));
+ exit(EXIT_FAILURE);
+ }
+}
+
static void bench_cb(void *opaque, int ret)
{
BenchData *b = opaque;
@@ -3484,9 +3497,39 @@ static void bench_cb(void *opaque, int ret)
error_report("Failed request: %s\n", strerror(-ret));
exit(EXIT_FAILURE);
}
- if (b->in_flight > 0) {
+
+ if (b->in_flush) {
+ /* Just finished a flush with drained queue: Start next requests */
+ assert(b->in_flight == 0);
+ b->in_flush = false;
+ } else if (b->in_flight > 0) {
+ int remaining = b->n - b->in_flight;
+
b->n--;
b->in_flight--;
+
+ /* Time for flush? Drain queue if requested, then flush */
+ if (b->flush_interval && remaining % b->flush_interval == 0) {
+ if (!b->in_flight || !b->drain_on_flush) {
+ BlockCompletionFunc *cb;
+
+ if (b->drain_on_flush) {
+ b->in_flush = true;
+ cb = bench_cb;
+ } else {
+ cb = bench_undrained_flush_cb;
+ }
+
+ acb = blk_aio_flush(b->blk, cb, b);
+ if (!acb) {
+ error_report("Failed to issue flush request");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (b->drain_on_flush) {
+ return;
+ }
+ }
}
while (b->n > b->in_flight && b->in_flight < b->nrreq) {
@@ -3520,6 +3563,8 @@ static int img_bench(int argc, char **argv)
size_t bufsize = 4096;
int pattern = 0;
size_t step = 0;
+ int flush_interval = 0;
+ bool drain_on_flush = true;
int64_t image_size;
BlockBackend *blk = NULL;
BenchData data = {};
@@ -3531,8 +3576,10 @@ static int img_bench(int argc, char **argv)
for (;;) {
static const struct option long_options[] = {
{"help", no_argument, 0, 'h'},
+ {"flush-interval", required_argument, 0, OPTION_FLUSH_INTERVAL},
{"image-opts", no_argument, 0, OPTION_IMAGE_OPTS},
{"pattern", required_argument, 0, OPTION_PATTERN},
+ {"no-drain", no_argument, 0, OPTION_NO_DRAIN},
{0, 0, 0, 0}
};
c = getopt_long(argc, argv, "hc:d:f:no:qs:S:t:w", long_options, NULL);
@@ -3640,6 +3687,20 @@ static int img_bench(int argc, char **argv)
}
break;
}
+ case OPTION_FLUSH_INTERVAL:
+ {
+ char *end;
+ errno = 0;
+ flush_interval = strtoul(optarg, &end, 0);
+ if (errno || *end || flush_interval > INT_MAX) {
+ error_report("Invalid flush interval specified");
+ return 1;
+ }
+ break;
+ }
+ case OPTION_NO_DRAIN:
+ drain_on_flush = false;
+ break;
case OPTION_IMAGE_OPTS:
image_opts = true;
break;
@@ -3651,6 +3712,17 @@ static int img_bench(int argc, char **argv)
}
filename = argv[argc - 1];
+ if (!is_write && flush_interval) {
+ error_report("--flush-interval is only available in write tests");
+ ret = -1;
+ goto out;
+ }
+ if (flush_interval && flush_interval < depth) {
+ error_report("Flush interval can't be smaller than depth");
+ ret = -1;
+ goto out;
+ }
+
blk = img_open(image_opts, filename, fmt, flags, writethrough, quiet);
if (!blk) {
ret = -1;
@@ -3664,19 +3736,24 @@ static int img_bench(int argc, char **argv)
}
data = (BenchData) {
- .blk = blk,
- .image_size = image_size,
- .bufsize = bufsize,
- .step = step ?: bufsize,
- .nrreq = depth,
- .n = count,
- .offset = offset,
- .write = is_write,
+ .blk = blk,
+ .image_size = image_size,
+ .bufsize = bufsize,
+ .step = step ?: bufsize,
+ .nrreq = depth,
+ .n = count,
+ .offset = offset,
+ .write = is_write,
+ .flush_interval = flush_interval,
+ .drain_on_flush = drain_on_flush,
};
printf("Sending %d %s requests, %d bytes each, %d in parallel "
"(starting at offset %" PRId64 ", step size %d)\n",
data.n, data.write ? "write" : "read", data.bufsize, data.nrreq,
data.offset, data.step);
+ if (flush_interval) {
+ printf("Sending flush every %d requests\n", flush_interval);
+ }
data.buf = blk_blockalign(blk, data.nrreq * data.bufsize);
memset(data.buf, pattern, data.nrreq * data.bufsize);
diff --git a/qemu-img.texi b/qemu-img.texi
index ccc0b51..cbe50e9 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -131,7 +131,7 @@ Skip the creation of the target volume
Command description:
@table @option
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [-n] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
specified, a write test is performed, otherwise a read test is performed.
@@ -142,6 +142,12 @@ starts at the position given by @var{offset}, each following request increases
the current position by @var{step_size}. If @var{step_size} is not given,
@var{buffer_size} is used for its value.
+If @var{flush_interval} is specified for a write test, the request queue is
+drained and a flush is issued before new writes are made whenever the number of
+remaining requests is a multiple of @var{flush_interval}. If additionally
+@code{--no-drain} is specified, a flush is issued without draining the request
+queue first.
+
If @code{-n} is specified, the native AIO backend is used if possible. On
Linux, this option only works if @code{-t none} or @code{-t directsync} is
specified as well.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/31] Block layer patches
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
` (30 preceding siblings ...)
2016-06-08 9:16 ` [Qemu-devel] [PULL 31/31] qemu-img bench: Add --flush-interval Kevin Wolf
@ 2016-06-08 17:27 ` Peter Maydell
31 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2016-06-08 17:27 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Qemu-block, QEMU Developers
On 8 June 2016 at 10:16, Kevin Wolf <kwolf@redhat.com> wrote:
> The following changes since commit 6ed5546fa7bf12c5b87ef76bafb86e1d77ed6e85:
>
> Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-06-07' into staging (2016-06-07 16:34:45 +0100)
>
> are available in the git repository at:
>
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to 55d539c8f75abab70301a43d8c94b976f6ddc358:
>
> qemu-img bench: Add --flush-interval (2016-06-08 10:21:09 +0200)
>
> ----------------------------------------------------------------
> Block layer patches
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/31] Block layer patches
2016-05-25 17:39 Kevin Wolf
@ 2016-05-26 14:06 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2016-05-26 14:06 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Qemu-block, QEMU Developers
On 25 May 2016 at 18:39, Kevin Wolf <kwolf@redhat.com> wrote:
> The following changes since commit 287db79df8af8e31f18e262feb5e05103a09e4d4:
>
> Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2016-05-24 13:06:33 +0100)
>
> are available in the git repository at:
>
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to b75536c9fa742f887304769d0608557bb8e3a27f:
>
> blockjob: Remove BlockJob.bs (2016-05-25 19:04:21 +0200)
>
> ----------------------------------------------------------------
> Block layer patches
>
> ----------------------------------------------------------------
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/31] Block layer patches
@ 2016-05-25 17:39 Kevin Wolf
2016-05-26 14:06 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Kevin Wolf @ 2016-05-25 17:39 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
The following changes since commit 287db79df8af8e31f18e262feb5e05103a09e4d4:
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2016-05-24 13:06:33 +0100)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git tags/for-upstream
for you to fetch changes up to b75536c9fa742f887304769d0608557bb8e3a27f:
blockjob: Remove BlockJob.bs (2016-05-25 19:04:21 +0200)
----------------------------------------------------------------
Block layer patches
----------------------------------------------------------------
Alberto Garcia (1):
block: keep a list of block jobs
Eric Blake (1):
block: Rename blk_write_zeroes()
John Snow (1):
backup: Pack Notifier within BackupBlockJob
Kevin Wolf (17):
block: Fix bdrv_next() memory leak
block: Introduce bdrv_replace_child()
block: Make bdrv_drain() use bdrv_drained_begin/end()
block: Fix reconfiguring graph with drained nodes
block: Propagate .drained_begin/end callbacks
block: Cancel jobs first in bdrv_close_all()
block: Default to enabled write cache in blk_new()
block: Convert block job core to BlockBackend
block: Make blk_co_preadv/pwritev() public
stream: Use BlockBackend for I/O
mirror: Allow target that already has a BlockBackend
mirror: Use BlockBackend for I/O
backup: Don't leak BackupBlockJob in error path
backup: Remove bs parameter from backup_do_cow()
backup: Use BlockBackend for I/O
commit: Use BlockBackend for I/O
blockjob: Remove BlockJob.bs
Max Reitz (9):
block: Drop useless bdrv_new() call
block: Let bdrv_open_inherit() return the snapshot
tests: Drop BDS from test-throttle.c
block: Drop blk_new_with_bs()
block: Drop bdrv_new_root()
block: Make bdrv_open() return a BDS
block: Assert !bs->refcnt in bdrv_close()
block: Drop bdrv_parent_cb_...() from bdrv_close()
block: Drop errp parameter from blk_new()
Paolo Bonzini (2):
dma-helpers: change interface to byte-based
dma-helpers: change BlockBackend to opaque value in DMAIOFunc
block.c | 245 ++++++++++++++++++++---------------------
block/backup.c | 71 ++++++------
block/block-backend.c | 123 +++++++++------------
block/commit.c | 53 +++++----
block/io.c | 97 +++++++---------
block/mirror.c | 100 ++++++++---------
block/parallels.c | 4 +-
block/snapshot.c | 55 ++++++---
block/stream.c | 15 ++-
block/vvfat.c | 8 +-
blockdev.c | 60 ++++------
blockjob.c | 62 ++++++++---
dma-helpers.c | 54 ++++++---
hw/block/nvme.c | 6 +-
hw/ide/ahci.c | 6 +-
hw/ide/core.c | 20 ++--
hw/ide/internal.h | 6 +-
hw/ide/macio.c | 2 +-
hw/scsi/scsi-disk.c | 8 +-
include/block/block.h | 24 ++--
include/block/block_int.h | 3 +-
include/block/blockjob.h | 23 +++-
include/sysemu/block-backend.h | 23 ++--
include/sysemu/dma.h | 20 ++--
migration/block.c | 4 +-
monitor.c | 4 +-
qemu-img.c | 6 +-
qemu-io-cmds.c | 22 ++--
qmp.c | 5 +-
tests/qemu-iotests/041 | 27 -----
tests/qemu-iotests/041.out | 4 +-
tests/test-blockjob-txn.c | 3 +-
tests/test-throttle.c | 6 +-
trace-events | 8 +-
34 files changed, 603 insertions(+), 574 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/31] Block layer patches
2016-05-19 15:21 Kevin Wolf
@ 2016-05-19 16:40 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2016-05-19 16:40 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Qemu-block, QEMU Developers
On 19 May 2016 at 16:21, Kevin Wolf <kwolf@redhat.com> wrote:
> The following changes since commit 8ec4fe0a4bed4fa27e6f28a746bcf77b27cd05a3:
>
> Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-05-18' into staging (2016-05-19 09:27:28 +0100)
>
> are available in the git repository at:
>
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to 7753da2351e0b0ff6825d080aff58d73c994ff47:
>
> Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-05-19' into queue-block (2016-05-19 16:59:46 +0200)
>
> ----------------------------------------------------------------
>
> Block layer patches
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/31] Block layer patches
@ 2016-05-19 15:21 Kevin Wolf
2016-05-19 16:40 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Kevin Wolf @ 2016-05-19 15:21 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
The following changes since commit 8ec4fe0a4bed4fa27e6f28a746bcf77b27cd05a3:
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-05-18' into staging (2016-05-19 09:27:28 +0100)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git tags/for-upstream
for you to fetch changes up to 7753da2351e0b0ff6825d080aff58d73c994ff47:
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-05-19' into queue-block (2016-05-19 16:59:46 +0200)
----------------------------------------------------------------
Block layer patches
----------------------------------------------------------------
Denis V. Lunev (1):
qcow2: fix condition in is_zero_cluster
Eric Blake (3):
qemu-io: Fix recent UI updates
qemu-iotests: Simplify 109 with unaligned qemu-img compare
qemu-iotests: Fix regression in 136 on aio_read invalid
John Snow (1):
block: clarify error message for qmp-eject
Kevin Wolf (26):
block: Make sure throttled BDSes always have a BB
block: Introduce BlockBackendPublic
block: throttle-groups: Use BlockBackend pointers internally
block: Convert throttle_group_get_name() to BlockBackend
block: Move throttling fields from BDS to BB
block: Move actual I/O throttling to BlockBackend
block: Move I/O throttling configuration functions to BlockBackend
block: Introduce BdrvChild.opaque
block: Drain throttling queue with BdrvChild callback
block/io: Quiesce parents between drained_begin/end
block: Decouple throttling from BlockDriverState
block: Remove bdrv_move_feature_fields()
Revert "block: Forbid I/O throttling on nodes with multiple parents for 2.6"
block: Don't check throttled reqs in bdrv_requests_pending()
block: Use BdrvChild callbacks for change_media/resize
block: User BdrvChild callback for device name
blockjob: Don't set iostatus of target
blockjob: Don't touch BDS iostatus
block: Remove bdrv_aio_multiwrite()
block: Add bdrv_has_blk()
block: Avoid bs->blk in bdrv_next()
block: Don't return throttling info in query-named-block-nodes
block: Remove BlockDriverState.blk
qcow2: Fix write_zeroes with partially allocated backing file cluster
qemu-iotests: Some more write_zeroes tests
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-05-19' into queue-block
Max Reitz (1):
block: Propagate AioContext change to all children
block.c | 181 +++++++++----------------
block/backup.c | 34 +----
block/blkverify.c | 19 ---
block/block-backend.c | 251 +++++++++++++++++++++++++---------
block/commit.c | 7 -
block/io.c | 293 ++++------------------------------------
block/mirror.c | 38 +-----
block/qapi.c | 6 +-
block/qcow2.c | 3 +-
block/quorum.c | 24 ----
block/snapshot.c | 30 ++--
block/stream.c | 10 +-
block/throttle-groups.c | 244 +++++++++++++++++----------------
block/vmdk.c | 23 ----
blockdev.c | 120 ++++++++--------
blockjob.c | 6 +-
include/block/block.h | 14 +-
include/block/block_int.h | 47 +++----
include/block/blockjob.h | 4 +-
include/block/throttle-groups.h | 14 +-
include/sysemu/block-backend.h | 30 +++-
migration/block.c | 4 +-
monitor.c | 6 +-
qemu-io-cmds.c | 226 +++----------------------------
qmp.c | 5 +-
tests/qemu-iotests/096 | 3 +-
tests/qemu-iotests/100 | 152 ---------------------
tests/qemu-iotests/100.out | 103 --------------
tests/qemu-iotests/109 | 2 -
tests/qemu-iotests/109.out | 4 -
tests/qemu-iotests/136 | 35 ++---
tests/qemu-iotests/136.out | 4 +-
tests/qemu-iotests/154 | 265 ++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/154.out | 242 +++++++++++++++++++++++++++++++++
tests/qemu-iotests/group | 3 +-
tests/test-throttle.c | 62 +++++----
trace-events | 2 -
37 files changed, 1155 insertions(+), 1361 deletions(-)
delete mode 100755 tests/qemu-iotests/100
delete mode 100644 tests/qemu-iotests/100.out
create mode 100755 tests/qemu-iotests/154
create mode 100644 tests/qemu-iotests/154.out
^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2016-06-08 17:27 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 01/31] block: split write_zeroes always Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 02/31] qcow2: simplify logic in qcow2_co_write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 03/31] qcow2: add tracepoints for qcow2_co_write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 04/31] qemu-iotests: Test one more spot for optimizing write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 05/31] qcow2: Catch more unaligned write_zero into zero cluster Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 06/31] iscsi: Use block size as minimum zero/discard alignment Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 07/31] block: Track write zero limits in bytes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 08/31] block: Add .bdrv_co_pwrite_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 09/31] block: Switch bdrv_write_zeroes() to byte interface Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 10/31] iscsi: Convert to bdrv_co_pwrite_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 11/31] qcow2: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 12/31] blkreplay: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 13/31] gluster: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 14/31] qed: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 15/31] raw-posix: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 16/31] raw_bsd: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 17/31] vmdk: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 18/31] block: Kill bdrv_co_write_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 19/31] migration/block: Convert load to BlockBackend Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 20/31] migration/block: Convert saving " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 21/31] block: assert that bs->request_alignment is a power of 2 Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 22/31] raw-posix: Fetch max sectors for host block device Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 23/31] qcow2: avoid extra flushes in qcow2 Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 24/31] block: Fix bdrv_all_delete_snapshot() error handling Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 25/31] blockdev: clean up error handling in do_open_tray Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 26/31] block: Don't emulate natively supported pwritev flags Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 27/31] qemu-img bench Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 28/31] qemu-img bench: Sequential writes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 29/31] qemu-img bench: Make start offset configurable Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 30/31] qemu-img bench: Implement -S (step size) Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 31/31] qemu-img bench: Add --flush-interval Kevin Wolf
2016-06-08 17:27 ` [Qemu-devel] [PULL 00/31] Block layer patches Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2016-05-25 17:39 Kevin Wolf
2016-05-26 14:06 ` Peter Maydell
2016-05-19 15:21 Kevin Wolf
2016-05-19 16:40 ` Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.