* [PULL v2 01/12] target/riscv: pmp: Fix some typos
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 02/12] target/riscv: csr: Remove redundant check in fp csr read/write routines Alistair Francis
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel
Cc: Bin Meng, Alistair Francis, Philippe Mathieu-Daudé
From: Bin Meng <bmeng.cn@gmail.com>
%s/CSP/CSR
%s/thie/the
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627115716.3552-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/pmp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
index 82ed020b10..54abf42583 100644
--- a/target/riscv/pmp.c
+++ b/target/riscv/pmp.c
@@ -456,7 +456,7 @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr,
}
/*
- * Handle a write to a pmpcfg CSP
+ * Handle a write to a pmpcfg CSR
*/
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
target_ulong val)
@@ -483,7 +483,7 @@ void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
/*
- * Handle a read from a pmpcfg CSP
+ * Handle a read from a pmpcfg CSR
*/
target_ulong pmpcfg_csr_read(CPURISCVState *env, uint32_t reg_index)
{
@@ -502,7 +502,7 @@ target_ulong pmpcfg_csr_read(CPURISCVState *env, uint32_t reg_index)
/*
- * Handle a write to a pmpaddr CSP
+ * Handle a write to a pmpaddr CSR
*/
void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index,
target_ulong val)
@@ -540,7 +540,7 @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index,
/*
- * Handle a read from a pmpaddr CSP
+ * Handle a read from a pmpaddr CSR
*/
target_ulong pmpaddr_csr_read(CPURISCVState *env, uint32_t addr_index)
{
@@ -593,7 +593,7 @@ target_ulong mseccfg_csr_read(CPURISCVState *env)
/*
* Calculate the TLB size if the start address or the end address of
- * PMP entry is presented in thie TLB page.
+ * PMP entry is presented in the TLB page.
*/
static target_ulong pmp_get_tlb_size(CPURISCVState *env, int pmp_index,
target_ulong tlb_sa, target_ulong tlb_ea)
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 02/12] target/riscv: csr: Remove redundant check in fp csr read/write routines
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
2021-07-15 7:16 ` [PULL v2 01/12] target/riscv: pmp: Fix some typos Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 03/12] docs/system: riscv: Fix CLINT name in the sifive_u doc Alistair Francis
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
The following check:
if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
return -RISCV_EXCP_ILLEGAL_INST;
}
is redundant in fflags/frm/fcsr read/write routines, as the check was
already done in fs().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627120604.11116-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/csr.c | 24 ------------------------
1 file changed, 24 deletions(-)
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index fe5628fea6..62b968326c 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -215,11 +215,6 @@ static RISCVException epmp(CPURISCVState *env, int csrno)
static RISCVException read_fflags(CPURISCVState *env, int csrno,
target_ulong *val)
{
-#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
-#endif
*val = riscv_cpu_get_fflags(env);
return RISCV_EXCP_NONE;
}
@@ -228,9 +223,6 @@ static RISCVException write_fflags(CPURISCVState *env, int csrno,
target_ulong val)
{
#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
env->mstatus |= MSTATUS_FS;
#endif
riscv_cpu_set_fflags(env, val & (FSR_AEXC >> FSR_AEXC_SHIFT));
@@ -240,11 +232,6 @@ static RISCVException write_fflags(CPURISCVState *env, int csrno,
static RISCVException read_frm(CPURISCVState *env, int csrno,
target_ulong *val)
{
-#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
-#endif
*val = env->frm;
return RISCV_EXCP_NONE;
}
@@ -253,9 +240,6 @@ static RISCVException write_frm(CPURISCVState *env, int csrno,
target_ulong val)
{
#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
env->mstatus |= MSTATUS_FS;
#endif
env->frm = val & (FSR_RD >> FSR_RD_SHIFT);
@@ -265,11 +249,6 @@ static RISCVException write_frm(CPURISCVState *env, int csrno,
static RISCVException read_fcsr(CPURISCVState *env, int csrno,
target_ulong *val)
{
-#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
-#endif
*val = (riscv_cpu_get_fflags(env) << FSR_AEXC_SHIFT)
| (env->frm << FSR_RD_SHIFT);
if (vs(env, csrno) >= 0) {
@@ -283,9 +262,6 @@ static RISCVException write_fcsr(CPURISCVState *env, int csrno,
target_ulong val)
{
#if !defined(CONFIG_USER_ONLY)
- if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
- return RISCV_EXCP_ILLEGAL_INST;
- }
env->mstatus |= MSTATUS_FS;
#endif
env->frm = (val & FSR_RD) >> FSR_RD_SHIFT;
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 03/12] docs/system: riscv: Fix CLINT name in the sifive_u doc
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
2021-07-15 7:16 ` [PULL v2 01/12] target/riscv: pmp: Fix some typos Alistair Francis
2021-07-15 7:16 ` [PULL v2 02/12] target/riscv: csr: Remove redundant check in fp csr read/write routines Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 04/12] docs/system: riscv: Add documentation for virt machine Alistair Francis
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
It's Core *Local* Interruptor, not 'Level'.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627142816.19789-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
docs/system/riscv/sifive_u.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index 32d0a1b85d..01108b5ecc 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -11,7 +11,7 @@ The ``sifive_u`` machine supports the following devices:
* 1 E51 / E31 core
* Up to 4 U54 / U34 cores
-* Core Level Interruptor (CLINT)
+* Core Local Interruptor (CLINT)
* Platform-Level Interrupt Controller (PLIC)
* Power, Reset, Clock, Interrupt (PRCI)
* L2 Loosely Integrated Memory (L2-LIM)
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 04/12] docs/system: riscv: Add documentation for virt machine
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (2 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 03/12] docs/system: riscv: Fix CLINT name in the sifive_u doc Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 05/12] target/riscv: hardwire bits in hideleg and hedeleg Alistair Francis
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
This adds detailed documentation for RISC-V `virt` machine,
including the following information:
- Supported devices
- Hardware configuration information
- Boot options
- Running Linux kernel
- Running U-Boot
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627142816.19789-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
docs/system/riscv/virt.rst | 138 +++++++++++++++++++++++++++++++++++
docs/system/target-riscv.rst | 1 +
2 files changed, 139 insertions(+)
create mode 100644 docs/system/riscv/virt.rst
diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst
new file mode 100644
index 0000000000..3709f05797
--- /dev/null
+++ b/docs/system/riscv/virt.rst
@@ -0,0 +1,138 @@
+'virt' Generic Virtual Platform (``virt``)
+==========================================
+
+The `virt` board is a platform which does not correspond to any real hardware;
+it is designed for use in virtual machines. It is the recommended board type
+if you simply want to run a guest such as Linux and do not care about
+reproducing the idiosyncrasies and limitations of a particular bit of
+real-world hardware.
+
+Supported devices
+-----------------
+
+The ``virt`` machine supports the following devices:
+
+* Up to 8 generic RV32GC/RV64GC cores, with optional extensions
+* Core Local Interruptor (CLINT)
+* Platform-Level Interrupt Controller (PLIC)
+* CFI parallel NOR flash memory
+* 1 NS16550 compatible UART
+* 1 Google Goldfish RTC
+* 1 SiFive Test device
+* 8 virtio-mmio transport devices
+* 1 generic PCIe host bridge
+* The fw_cfg device that allows a guest to obtain data from QEMU
+
+Note that the default CPU is a generic RV32GC/RV64GC. Optional extensions
+can be enabled via command line parameters, e.g.: ``-cpu rv64,x-h=true``
+enables the hypervisor extension for RV64.
+
+Hardware configuration information
+----------------------------------
+
+The ``virt`` machine automatically generates a device tree blob ("dtb")
+which it passes to the guest, if there is no ``-dtb`` option. This provides
+information about the addresses, interrupt lines and other configuration of
+the various devices in the system. Guest software should discover the devices
+that are present in the generated DTB.
+
+If users want to provide their own DTB, they can use the ``-dtb`` option.
+These DTBs should have the following requirements:
+
+* The number of subnodes of the /cpus node should match QEMU's ``-smp`` option
+* The /memory reg size should match QEMU’s selected ram_size via ``-m``
+* Should contain a node for the CLINT device with a compatible string
+ "riscv,clint0" if using with OpenSBI BIOS images
+
+Boot options
+------------
+
+The ``virt`` machine can start using the standard -kernel functionality
+for loading a Linux kernel, a VxWorks kernel, an S-mode U-Boot bootloader
+with the default OpenSBI firmware image as the -bios. It also supports
+the recommended RISC-V bootflow: U-Boot SPL (M-mode) loads OpenSBI fw_dynamic
+firmware and U-Boot proper (S-mode), using the standard -bios functionality.
+
+Running Linux kernel
+--------------------
+
+Linux mainline v5.12 release is tested at the time of writing. To build a
+Linux mainline kernel that can be booted by the ``virt`` machine in
+64-bit mode, simply configure the kernel using the defconfig configuration:
+
+.. code-block:: bash
+
+ $ export ARCH=riscv
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ make defconfig
+ $ make
+
+To boot the newly built Linux kernel in QEMU with the ``virt`` machine:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -M virt -smp 4 -m 2G \
+ -display none -serial stdio \
+ -kernel arch/riscv/boot/Image \
+ -initrd /path/to/rootfs.cpio \
+ -append "root=/dev/ram"
+
+To build a Linux mainline kernel that can be booted by the ``virt`` machine
+in 32-bit mode, use the rv32_defconfig configuration. A patch is required to
+fix the 32-bit boot issue for Linux kernel v5.12.
+
+.. code-block:: bash
+
+ $ export ARCH=riscv
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ curl https://patchwork.kernel.org/project/linux-riscv/patch/20210627135117.28641-1-bmeng.cn@gmail.com/mbox/ > riscv.patch
+ $ git am riscv.patch
+ $ make rv32_defconfig
+ $ make
+
+Replace ``qemu-system-riscv64`` with ``qemu-system-riscv32`` in the command
+line above to boot the 32-bit Linux kernel. A rootfs image containing 32-bit
+applications shall be used in order for kernel to boot to user space.
+
+Running U-Boot
+--------------
+
+U-Boot mainline v2021.04 release is tested at the time of writing. To build an
+S-mode U-Boot bootloader that can be booted by the ``virt`` machine, use
+the qemu-riscv64_smode_defconfig with similar commands as described above for Linux:
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ make qemu-riscv64_smode_defconfig
+
+Boot the 64-bit U-Boot S-mode image directly:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -M virt -smp 4 -m 2G \
+ -display none -serial stdio \
+ -kernel /path/to/u-boot.bin
+
+To test booting U-Boot SPL which in M-mode, which in turn loads a FIT image
+that bundles OpenSBI fw_dynamic firmware and U-Boot proper (S-mode) together,
+build the U-Boot images using riscv64_spl_defconfig:
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ export OPENSBI=/path/to/opensbi-riscv64-generic-fw_dynamic.bin
+ $ make qemu-riscv64_spl_defconfig
+
+The minimal QEMU commands to run U-Boot SPL are:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -M virt -smp 4 -m 2G \
+ -display none -serial stdio \
+ -bios /path/to/u-boot-spl \
+ -device loader,file=/path/to/u-boot.itb,addr=0x80200000
+
+To test 32-bit U-Boot images, switch to use qemu-riscv32_smode_defconfig and
+riscv32_spl_defconfig builds, and replace ``qemu-system-riscv64`` with
+``qemu-system-riscv32`` in the command lines above to boot the 32-bit U-Boot.
diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst
index a5cc06b726..89a866e4f4 100644
--- a/docs/system/target-riscv.rst
+++ b/docs/system/target-riscv.rst
@@ -69,6 +69,7 @@ undocumented; you can get a complete list by running
riscv/microchip-icicle-kit
riscv/shakti-c
riscv/sifive_u
+ riscv/virt
RISC-V CPU firmware
-------------------
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 05/12] target/riscv: hardwire bits in hideleg and hedeleg
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (3 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 04/12] docs/system: riscv: Add documentation for virt machine Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 06/12] docs/system: riscv: Update Microchip Icicle Kit for direct kernel boot Alistair Francis
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Jose Martins, Alistair Francis, LIU Zhiwei
From: Jose Martins <josemartins90@gmail.com>
The specification mandates for certain bits to be hardwired in the
hypervisor delegation registers. This was not being enforced.
Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210522155902.374439-1-josemartins90@gmail.com
[ Changes by AF:
- Improve indentation
- Convert delegable_excps to a #define to avoid failures with GCC 8
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/csr.c | 54 ++++++++++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 23 deletions(-)
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 62b968326c..9a4ed18ac5 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -411,28 +411,36 @@ static RISCVException read_timeh(CPURISCVState *env, int csrno,
static const target_ulong delegable_ints = S_MODE_INTERRUPTS |
VS_MODE_INTERRUPTS;
+static const target_ulong vs_delegable_ints = VS_MODE_INTERRUPTS;
static const target_ulong all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS |
VS_MODE_INTERRUPTS;
-static const target_ulong delegable_excps =
- (1ULL << (RISCV_EXCP_INST_ADDR_MIS)) |
- (1ULL << (RISCV_EXCP_INST_ACCESS_FAULT)) |
- (1ULL << (RISCV_EXCP_ILLEGAL_INST)) |
- (1ULL << (RISCV_EXCP_BREAKPOINT)) |
- (1ULL << (RISCV_EXCP_LOAD_ADDR_MIS)) |
- (1ULL << (RISCV_EXCP_LOAD_ACCESS_FAULT)) |
- (1ULL << (RISCV_EXCP_STORE_AMO_ADDR_MIS)) |
- (1ULL << (RISCV_EXCP_STORE_AMO_ACCESS_FAULT)) |
- (1ULL << (RISCV_EXCP_U_ECALL)) |
- (1ULL << (RISCV_EXCP_S_ECALL)) |
- (1ULL << (RISCV_EXCP_VS_ECALL)) |
- (1ULL << (RISCV_EXCP_M_ECALL)) |
- (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) |
- (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) |
- (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) |
- (1ULL << (RISCV_EXCP_INST_GUEST_PAGE_FAULT)) |
- (1ULL << (RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT)) |
- (1ULL << (RISCV_EXCP_VIRT_INSTRUCTION_FAULT)) |
- (1ULL << (RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT));
+#define DELEGABLE_EXCPS ((1ULL << (RISCV_EXCP_INST_ADDR_MIS)) | \
+ (1ULL << (RISCV_EXCP_INST_ACCESS_FAULT)) | \
+ (1ULL << (RISCV_EXCP_ILLEGAL_INST)) | \
+ (1ULL << (RISCV_EXCP_BREAKPOINT)) | \
+ (1ULL << (RISCV_EXCP_LOAD_ADDR_MIS)) | \
+ (1ULL << (RISCV_EXCP_LOAD_ACCESS_FAULT)) | \
+ (1ULL << (RISCV_EXCP_STORE_AMO_ADDR_MIS)) | \
+ (1ULL << (RISCV_EXCP_STORE_AMO_ACCESS_FAULT)) | \
+ (1ULL << (RISCV_EXCP_U_ECALL)) | \
+ (1ULL << (RISCV_EXCP_S_ECALL)) | \
+ (1ULL << (RISCV_EXCP_VS_ECALL)) | \
+ (1ULL << (RISCV_EXCP_M_ECALL)) | \
+ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \
+ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \
+ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \
+ (1ULL << (RISCV_EXCP_INST_GUEST_PAGE_FAULT)) | \
+ (1ULL << (RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT)) | \
+ (1ULL << (RISCV_EXCP_VIRT_INSTRUCTION_FAULT)) | \
+ (1ULL << (RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT)))
+static const target_ulong vs_delegable_excps = DELEGABLE_EXCPS &
+ ~((1ULL << (RISCV_EXCP_S_ECALL)) |
+ (1ULL << (RISCV_EXCP_VS_ECALL)) |
+ (1ULL << (RISCV_EXCP_M_ECALL)) |
+ (1ULL << (RISCV_EXCP_INST_GUEST_PAGE_FAULT)) |
+ (1ULL << (RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT)) |
+ (1ULL << (RISCV_EXCP_VIRT_INSTRUCTION_FAULT)) |
+ (1ULL << (RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT)));
static const target_ulong sstatus_v1_10_mask = SSTATUS_SIE | SSTATUS_SPIE |
SSTATUS_UIE | SSTATUS_UPIE | SSTATUS_SPP | SSTATUS_FS | SSTATUS_XS |
SSTATUS_SUM | SSTATUS_MXR;
@@ -620,7 +628,7 @@ static RISCVException read_medeleg(CPURISCVState *env, int csrno,
static RISCVException write_medeleg(CPURISCVState *env, int csrno,
target_ulong val)
{
- env->medeleg = (env->medeleg & ~delegable_excps) | (val & delegable_excps);
+ env->medeleg = (env->medeleg & ~DELEGABLE_EXCPS) | (val & DELEGABLE_EXCPS);
return RISCV_EXCP_NONE;
}
@@ -1039,7 +1047,7 @@ static RISCVException read_hedeleg(CPURISCVState *env, int csrno,
static RISCVException write_hedeleg(CPURISCVState *env, int csrno,
target_ulong val)
{
- env->hedeleg = val;
+ env->hedeleg = val & vs_delegable_excps;
return RISCV_EXCP_NONE;
}
@@ -1053,7 +1061,7 @@ static RISCVException read_hideleg(CPURISCVState *env, int csrno,
static RISCVException write_hideleg(CPURISCVState *env, int csrno,
target_ulong val)
{
- env->hideleg = val;
+ env->hideleg = val & vs_delegable_ints;
return RISCV_EXCP_NONE;
}
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 06/12] docs/system: riscv: Update Microchip Icicle Kit for direct kernel boot
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (4 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 05/12] target/riscv: hardwire bits in hideleg and hedeleg Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 07/12] hw/riscv: sifive_u: Correct the CLINT timebase frequency Alistair Francis
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bin.meng@windriver.com>
This adds a new section in the documentation to demonstrate how to
use the new direct kernel boot feature for Microchip Icicle Kit,
other than the HSS bootflow, using an upstream U-Boot v2021.07 image
as an example.
It also updates the truth table to have a new '-dtb' column which is
required by direct kernel boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210706095045.1917913-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
docs/system/riscv/microchip-icicle-kit.rst | 54 +++++++++++++++++++---
1 file changed, 47 insertions(+), 7 deletions(-)
diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
index 54ced661e3..817d2aec9c 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -47,13 +47,13 @@ The user provided DTB should have the following requirements:
QEMU follows below truth table to select which payload to execute:
-===== ========== =======
--bios -kernel payload
-===== ========== =======
- N N HSS
- Y don't care HSS
- N Y kernel
-===== ========== =======
+===== ========== ========== =======
+-bios -kernel -dtb payload
+===== ========== ========== =======
+ N N don't care HSS
+ Y don't care don't care HSS
+ N Y Y kernel
+===== ========== ========== =======
The memory is set to 1537 MiB by default which is the minimum required high
memory size by HSS. A sanity check on ram size is performed in the machine
@@ -106,4 +106,44 @@ HSS output is on the first serial port (stdio) and U-Boot outputs on the
second serial port. U-Boot will automatically load the Linux kernel from
the SD card image.
+Direct Kernel Boot
+------------------
+
+Sometimes we just want to test booting a new kernel, and transforming the
+kernel image to the format required by the HSS bootflow is tedious. We can
+use '-kernel' for direct kernel booting just like other RISC-V machines do.
+
+In this mode, the OpenSBI fw_dynamic BIOS image for 'generic' platform is
+used to boot an S-mode payload like U-Boot or OS kernel directly.
+
+For example, the following commands show building a U-Boot image from U-Boot
+mainline v2021.07 for the Microchip Icicle Kit board:
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ make microchip_mpfs_icicle_defconfig
+
+Then we can boot the machine by:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -M microchip-icicle-kit -smp 5 -m 2G \
+ -sd path/to/sdcard.img \
+ -nic user,model=cadence_gem \
+ -nic tap,ifname=tap,model=cadence_gem,script=no \
+ -display none -serial stdio \
+ -kernel path/to/u-boot/build/dir/u-boot.bin \
+ -dtb path/to/u-boot/build/dir/u-boot.dtb
+
+CAVEATS:
+
+* Check the "stdout-path" property in the /chosen node in the DTB to determine
+ which serial port is used for the serial console, e.g.: if the console is set
+ to the second serial port, change to use "-serial null -serial stdio".
+* The default U-Boot configuration uses CONFIG_OF_SEPARATE hence the ELF image
+ ``u-boot`` cannot be passed to "-kernel" as it does not contain the DTB hence
+ ``u-boot.bin`` has to be used which does contain one. To use the ELF image,
+ we need to change to CONFIG_OF_EMBED or CONFIG_OF_PRIOR_STAGE.
+
.. _HSS: https://github.com/polarfire-soc/hart-software-services
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 07/12] hw/riscv: sifive_u: Correct the CLINT timebase frequency
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (5 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 06/12] docs/system: riscv: Update Microchip Icicle Kit for direct kernel boot Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 08/12] hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned Alistair Francis
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bin.meng@windriver.com>
At present the CLINT timebase frequency is set to 10MHz on sifive_u,
but on the real hardware the timebase frequency is 1Mhz.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210706102616.1922469-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/sifive_u.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 273c86418c..e75ca38783 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -62,6 +62,9 @@
#include <libfdt.h>
+/* CLINT timebase frequency */
+#define CLINT_TIMEBASE_FREQ 1000000
+
static const MemMapEntry sifive_u_memmap[] = {
[SIFIVE_U_DEV_DEBUG] = { 0x0, 0x100 },
[SIFIVE_U_DEV_MROM] = { 0x1000, 0xf000 },
@@ -165,7 +168,7 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
qemu_fdt_add_subnode(fdt, "/cpus");
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
- SIFIVE_CLINT_TIMEBASE_FREQ);
+ CLINT_TIMEBASE_FREQ);
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
@@ -847,7 +850,7 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
sifive_clint_create(memmap[SIFIVE_U_DEV_CLINT].base,
memmap[SIFIVE_U_DEV_CLINT].size, 0, ms->smp.cpus,
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, false);
+ CLINT_TIMEBASE_FREQ, false);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
return;
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 08/12] hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (6 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 07/12] hw/riscv: sifive_u: Correct the CLINT timebase frequency Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 09/12] char: ibex_uart: Update the register layout Alistair Francis
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
Currently the firmware dynamic info (fw_dyn) is put right after
the reset vector, which is not 8-byte aligned on RV64. OpenSBI
fw_dynamic uses ld to read contents from 'struct fw_dynamic_info',
which expects fw_dyn to be on the 8-byte boundary, otherwise the
misaligned load exception may happen. Fortunately this does not
cause any issue on QEMU, as QEMU does support misaligned load.
RV32 does not have any issue as it is 4-byte aligned already.
Change to make sure it is 8-byte aligned which works for both
RV32 and RV64.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210708143319.10441-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/sifive_u.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index e75ca38783..87bbd10b21 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -602,10 +602,10 @@ static void sifive_u_machine_init(MachineState *machine)
}
/* reset vector */
- uint32_t reset_vec[11] = {
+ uint32_t reset_vec[12] = {
s->msel, /* MSEL pin state */
0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
- 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */
+ 0x02c28613, /* addi a2, t0, %pcrel_lo(1b) */
0xf1402573, /* csrr a0, mhartid */
0,
0,
@@ -613,6 +613,7 @@ static void sifive_u_machine_init(MachineState *machine)
start_addr, /* start: .dword */
start_addr_hi32,
fdt_load_addr, /* fdt_laddr: .dword */
+ 0x00000000,
0x00000000,
/* fw_dyn: */
};
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 09/12] char: ibex_uart: Update the register layout
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (7 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 08/12] hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 10/12] hw/riscv: opentitan: Add the unimplement rv_core_ibex_peri Alistair Francis
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
Update the register layout to match the latest OpenTitan bitstream.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 25c8377d32f3e0f0a1a862c8a5092f8a9e3f9928.1625801868.git.alistair.francis@wdc.com
---
hw/char/ibex_uart.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/hw/char/ibex_uart.c b/hw/char/ibex_uart.c
index fe4b6c3c9e..6b0c9330bf 100644
--- a/hw/char/ibex_uart.c
+++ b/hw/char/ibex_uart.c
@@ -42,7 +42,8 @@ REG32(INTR_STATE, 0x00)
FIELD(INTR_STATE, RX_OVERFLOW, 3, 1)
REG32(INTR_ENABLE, 0x04)
REG32(INTR_TEST, 0x08)
-REG32(CTRL, 0x0C)
+REG32(ALERT_TEST, 0x0C)
+REG32(CTRL, 0x10)
FIELD(CTRL, TX_ENABLE, 0, 1)
FIELD(CTRL, RX_ENABLE, 1, 1)
FIELD(CTRL, NF, 2, 1)
@@ -52,25 +53,25 @@ REG32(CTRL, 0x0C)
FIELD(CTRL, PARITY_ODD, 7, 1)
FIELD(CTRL, RXBLVL, 8, 2)
FIELD(CTRL, NCO, 16, 16)
-REG32(STATUS, 0x10)
+REG32(STATUS, 0x14)
FIELD(STATUS, TXFULL, 0, 1)
FIELD(STATUS, RXFULL, 1, 1)
FIELD(STATUS, TXEMPTY, 2, 1)
FIELD(STATUS, RXIDLE, 4, 1)
FIELD(STATUS, RXEMPTY, 5, 1)
-REG32(RDATA, 0x14)
-REG32(WDATA, 0x18)
-REG32(FIFO_CTRL, 0x1c)
+REG32(RDATA, 0x18)
+REG32(WDATA, 0x1C)
+REG32(FIFO_CTRL, 0x20)
FIELD(FIFO_CTRL, RXRST, 0, 1)
FIELD(FIFO_CTRL, TXRST, 1, 1)
FIELD(FIFO_CTRL, RXILVL, 2, 3)
FIELD(FIFO_CTRL, TXILVL, 5, 2)
-REG32(FIFO_STATUS, 0x20)
+REG32(FIFO_STATUS, 0x24)
FIELD(FIFO_STATUS, TXLVL, 0, 5)
FIELD(FIFO_STATUS, RXLVL, 16, 5)
-REG32(OVRD, 0x24)
-REG32(VAL, 0x28)
-REG32(TIMEOUT_CTRL, 0x2c)
+REG32(OVRD, 0x28)
+REG32(VAL, 0x2C)
+REG32(TIMEOUT_CTRL, 0x30)
static void ibex_uart_update_irqs(IbexUartState *s)
{
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 10/12] hw/riscv: opentitan: Add the unimplement rv_core_ibex_peri
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (8 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 09/12] char: ibex_uart: Update the register layout Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 11/12] hw/riscv: opentitan: Add the flash alias Alistair Francis
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: ed707782e84118e1b06a32fd79b70fecfb54ff82.1625801868.git.alistair.francis@wdc.com
---
include/hw/riscv/opentitan.h | 1 +
hw/riscv/opentitan.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index 86cceef698..a488f5e8ec 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -81,6 +81,7 @@ enum {
IBEX_DEV_ALERT_HANDLER,
IBEX_DEV_NMI_GEN,
IBEX_DEV_OTBN,
+ IBEX_DEV_PERI,
};
enum {
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index c5a7e3bacb..933c211b11 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -58,6 +58,7 @@ static const MemMapEntry ibex_memmap[] = {
[IBEX_DEV_ALERT_HANDLER] = { 0x411b0000, 0x1000 },
[IBEX_DEV_NMI_GEN] = { 0x411c0000, 0x1000 },
[IBEX_DEV_OTBN] = { 0x411d0000, 0x10000 },
+ [IBEX_DEV_PERI] = { 0x411f0000, 0x10000 },
};
static void opentitan_board_init(MachineState *machine)
@@ -217,6 +218,8 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
memmap[IBEX_DEV_NMI_GEN].base, memmap[IBEX_DEV_NMI_GEN].size);
create_unimplemented_device("riscv.lowrisc.ibex.otbn",
memmap[IBEX_DEV_OTBN].base, memmap[IBEX_DEV_OTBN].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.peri",
+ memmap[IBEX_DEV_PERI].base, memmap[IBEX_DEV_PERI].size);
}
static void lowrisc_ibex_soc_class_init(ObjectClass *oc, void *data)
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 11/12] hw/riscv: opentitan: Add the flash alias
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (9 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 10/12] hw/riscv: opentitan: Add the unimplement rv_core_ibex_peri Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-15 7:16 ` [PULL v2 12/12] hw/riscv/boot: Check the error of fdt_pack() Alistair Francis
2021-07-16 9:55 ` [PULL v2 00/12] riscv-to-apply queue Peter Maydell
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
OpenTitan has an alias of flash avaliable which is called virtual flash.
Add support for that in the QEMU model.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: c9cfbd2dd840fd0076877b8ea4d6dcfce60db5e9.1625801868.git.alistair.francis@wdc.com
---
include/hw/riscv/opentitan.h | 2 ++
hw/riscv/opentitan.c | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index a488f5e8ec..9f93bebdac 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -40,6 +40,7 @@ struct LowRISCIbexSoCState {
MemoryRegion flash_mem;
MemoryRegion rom;
+ MemoryRegion flash_alias;
};
typedef struct OpenTitanState {
@@ -54,6 +55,7 @@ enum {
IBEX_DEV_ROM,
IBEX_DEV_RAM,
IBEX_DEV_FLASH,
+ IBEX_DEV_FLASH_VIRTUAL,
IBEX_DEV_UART,
IBEX_DEV_GPIO,
IBEX_DEV_SPI,
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 933c211b11..36a41c8b5b 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -59,6 +59,7 @@ static const MemMapEntry ibex_memmap[] = {
[IBEX_DEV_NMI_GEN] = { 0x411c0000, 0x1000 },
[IBEX_DEV_OTBN] = { 0x411d0000, 0x10000 },
[IBEX_DEV_PERI] = { 0x411f0000, 0x10000 },
+ [IBEX_DEV_FLASH_VIRTUAL] = { 0x80000000, 0x80000 },
};
static void opentitan_board_init(MachineState *machine)
@@ -134,8 +135,13 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
/* Flash memory */
memory_region_init_rom(&s->flash_mem, OBJECT(dev_soc), "riscv.lowrisc.ibex.flash",
memmap[IBEX_DEV_FLASH].size, &error_fatal);
+ memory_region_init_alias(&s->flash_alias, OBJECT(dev_soc),
+ "riscv.lowrisc.ibex.flash_virtual", &s->flash_mem, 0,
+ memmap[IBEX_DEV_FLASH_VIRTUAL].size);
memory_region_add_subregion(sys_mem, memmap[IBEX_DEV_FLASH].base,
&s->flash_mem);
+ memory_region_add_subregion(sys_mem, memmap[IBEX_DEV_FLASH_VIRTUAL].base,
+ &s->flash_alias);
/* PLIC */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->plic), errp)) {
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL v2 12/12] hw/riscv/boot: Check the error of fdt_pack()
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (10 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 11/12] hw/riscv: opentitan: Add the flash alias Alistair Francis
@ 2021-07-15 7:16 ` Alistair Francis
2021-07-16 9:55 ` [PULL v2 00/12] riscv-to-apply queue Peter Maydell
12 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2021-07-15 7:16 UTC (permalink / raw)
To: peter.maydell, qemu-devel; +Cc: Bin Meng, Alistair Francis
Coverity reports that we don't check the error result of fdt_pack(), so
let's save the result and assert that it is 0.
Fixes: Coverity CID 1458136
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 07325315b49d5555269f76094e4bc5296e0643b9.1626303527.git.alistair.francis@wdc.com
---
hw/riscv/boot.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 0d38bb7426..993bf89064 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -182,7 +182,7 @@ uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
{
uint32_t temp, fdt_addr;
hwaddr dram_end = dram_base + mem_size;
- int fdtsize = fdt_totalsize(fdt);
+ int ret, fdtsize = fdt_totalsize(fdt);
if (fdtsize <= 0) {
error_report("invalid device-tree");
@@ -198,7 +198,9 @@ uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
temp = MIN(dram_end, 3072 * MiB);
fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB);
- fdt_pack(fdt);
+ ret = fdt_pack(fdt);
+ /* Should only fail if we've built a corrupted tree */
+ g_assert(ret == 0);
/* copy in the device tree */
qemu_fdt_dumpdtb(fdt, fdtsize);
--
2.31.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PULL v2 00/12] riscv-to-apply queue
2021-07-15 7:16 [PULL v2 00/12] riscv-to-apply queue Alistair Francis
` (11 preceding siblings ...)
2021-07-15 7:16 ` [PULL v2 12/12] hw/riscv/boot: Check the error of fdt_pack() Alistair Francis
@ 2021-07-16 9:55 ` Peter Maydell
12 siblings, 0 replies; 14+ messages in thread
From: Peter Maydell @ 2021-07-16 9:55 UTC (permalink / raw)
To: Alistair Francis; +Cc: QEMU Developers
On Thu, 15 Jul 2021 at 08:16, Alistair Francis <alistair.francis@wdc.com> wrote:
>
> The following changes since commit a9649a719a44894b81f38dc1c5c1888ee684acef:
>
> Merge remote-tracking branch 'remotes/cleber-gitlab/tags/python-next-pull-request' into staging (2021-07-14 18:09:09 +0100)
>
> are available in the Git repository at:
>
> git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20210715
>
> for you to fetch changes up to b3d8aa20692b1baed299790f4a65d6b0cfb1a0bc:
>
> hw/riscv/boot: Check the error of fdt_pack() (2021-07-15 09:35:46 +1000)
>
> ----------------------------------------------------------------
> Fourth RISC-V PR for 6.1 release
>
> - Code cleanups
> - Documentation improvements
> - Hypervisor extension improvements with hideleg and hedeleg
> - sifive_u fixes
> - OpenTitan register layout updates
> - Fix coverity issue
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread