* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2019-06-17 14:33 Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 01/24] hw/arm/boot: Don't assume RAM starts at address zero Peter Maydell
` (24 more replies)
0 siblings, 25 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
Latest arm queue, half minor code cleanups and half minor
bug fixes.
-- PMM
The following changes since commit 5d0e5694470d2952b4f257bc985cac8c89b4fd92:
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2019-06-17 11:55:14 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190617
for you to fetch changes up to 1120827fa182f0e76226df7ffe7a86598d1df54f:
target/arm: Only implement doubles if the FPU supports them (2019-06-17 15:15:06 +0100)
----------------------------------------------------------------
target-arm queue:
* support large kernel images in bootloader (by avoiding
putting the initrd over the top of them)
* correctly disable FPU/DSP in the CPU for the mps2-an521, musca-a boards
* arm_gicv3: Fix decoding of ID register range
* arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
* some code cleanups following on from the VFP decodetree conversion
* Only implement doubles if the FPU supports them
(so we now correctly model Cortex-M4, -M33 as single precision only)
----------------------------------------------------------------
Peter Maydell (24):
hw/arm/boot: Don't assume RAM starts at address zero
hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM
hw/arm/boot: Avoid placing the initrd on top of the kernel
hw/arm/boot: Honour image size field in AArch64 Image format kernels
target/arm: Allow VFP and Neon to be disabled via a CPU property
target/arm: Allow M-profile CPUs to disable the DSP extension via CPU property
hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU
hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards
hw/intc/arm_gicv3: Fix decoding of ID register range
hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
target/arm: Move vfp_expand_imm() to translate.[ch]
target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm
target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F
target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F
target/arm: Stop using cpu_F0s for NEON_2RM_VRINT*
target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US]
target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F
target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT
target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops
target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32
target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16
target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d
target/arm: Fix typos in trans function prototypes
target/arm: Only implement doubles if the FPU supports them
include/hw/arm/armsse.h | 7 ++
include/hw/arm/armv7m.h | 4 +
target/arm/cpu.h | 12 +++
target/arm/translate-a64.h | 1 -
target/arm/translate.h | 7 ++
hw/arm/armsse.c | 58 +++++++---
hw/arm/armv7m.c | 18 ++++
hw/arm/boot.c | 83 ++++++++++----
hw/arm/musca.c | 8 ++
hw/intc/arm_gicv3_dist.c | 12 ++-
hw/intc/arm_gicv3_redist.c | 4 +-
target/arm/cpu.c | 179 ++++++++++++++++++++++++++++--
target/arm/translate-a64.c | 32 ------
target/arm/translate-vfp.inc.c | 173 ++++++++++++++++++++++-------
target/arm/translate.c | 240 ++++++++++++++---------------------------
target/arm/vfp.decode | 10 +-
16 files changed, 572 insertions(+), 276 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 01/24] hw/arm/boot: Don't assume RAM starts at address zero
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 02/24] hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM Peter Maydell
` (23 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
In the Arm kernel/initrd loading code, in some places we make the
incorrect assumption that info->ram_size can be treated as the
address of the end of RAM, as for instance when we calculate the
available space for the initrd using "info->ram_size - info->initrd_start".
This is wrong, because many Arm boards (including "virt") specify
a non-zero info->loader_start to indicate that their RAM area
starts at a non-zero physical address.
Correct the places which make this incorrect assumption.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190516144733.32399-2-peter.maydell@linaro.org
---
hw/arm/boot.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index 0261fdabab0..bb37a9383f3 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -977,6 +977,7 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
int elf_machine;
hwaddr entry;
static const ARMInsnFixup *primary_loader;
+ uint64_t ram_end = info->loader_start + info->ram_size;
if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
primary_loader = bootloader_aarch64;
@@ -1048,8 +1049,7 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
/* 32-bit ARM */
entry = info->loader_start + KERNEL_LOAD_ADDR;
kernel_size = load_image_targphys_as(info->kernel_filename, entry,
- info->ram_size - KERNEL_LOAD_ADDR,
- as);
+ ram_end - KERNEL_LOAD_ADDR, as);
is_linux = 1;
}
if (kernel_size < 0) {
@@ -1063,12 +1063,11 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
if (info->initrd_filename) {
initrd_size = load_ramdisk_as(info->initrd_filename,
info->initrd_start,
- info->ram_size - info->initrd_start,
- as);
+ ram_end - info->initrd_start, as);
if (initrd_size < 0) {
initrd_size = load_image_targphys_as(info->initrd_filename,
info->initrd_start,
- info->ram_size -
+ ram_end -
info->initrd_start,
as);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 02/24] hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 01/24] hw/arm/boot: Don't assume RAM starts at address zero Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 03/24] hw/arm/boot: Avoid placing the initrd on top of the kernel Peter Maydell
` (22 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
We calculate the locations in memory where we want to put the
initrd and the DTB based on the size of the kernel, since they
come after it. Add some explicit checks that these aren't off the
end of RAM entirely.
(At the moment the way we calculate the initrd_start means that
it can't ever be off the end of RAM, but that will change with
the next commit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190516144733.32399-3-peter.maydell@linaro.org
---
hw/arm/boot.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index bb37a9383f3..5ddba727d45 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -1056,11 +1056,25 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
error_report("could not load kernel '%s'", info->kernel_filename);
exit(1);
}
+
+ if (kernel_size > info->ram_size) {
+ error_report("kernel '%s' is too large to fit in RAM "
+ "(kernel size %d, RAM size %" PRId64 ")",
+ info->kernel_filename, kernel_size, info->ram_size);
+ exit(1);
+ }
+
info->entry = entry;
if (is_linux) {
uint32_t fixupcontext[FIXUP_MAX];
if (info->initrd_filename) {
+
+ if (info->initrd_start >= ram_end) {
+ error_report("not enough space after kernel to load initrd");
+ exit(1);
+ }
+
initrd_size = load_ramdisk_as(info->initrd_filename,
info->initrd_start,
ram_end - info->initrd_start, as);
@@ -1076,6 +1090,11 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
info->initrd_filename);
exit(1);
}
+ if (info->initrd_start + initrd_size > info->ram_size) {
+ error_report("could not load initrd '%s': "
+ "too big to fit into RAM after the kernel",
+ info->initrd_filename);
+ }
} else {
initrd_size = 0;
}
@@ -1111,6 +1130,10 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
/* Place the DTB after the initrd in memory with alignment. */
info->dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size,
align);
+ if (info->dtb_start >= ram_end) {
+ error_report("Not enough space for DTB after kernel/initrd");
+ exit(1);
+ }
fixupcontext[FIXUP_ARGPTR_LO] = info->dtb_start;
fixupcontext[FIXUP_ARGPTR_HI] = info->dtb_start >> 32;
} else {
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 03/24] hw/arm/boot: Avoid placing the initrd on top of the kernel
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 01/24] hw/arm/boot: Don't assume RAM starts at address zero Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 02/24] hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 04/24] hw/arm/boot: Honour image size field in AArch64 Image format kernels Peter Maydell
` (21 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
We currently put the initrd at the smaller of:
* 128MB into RAM
* halfway into the RAM
(with the dtb following it).
However for large kernels this might mean that the kernel
overlaps the initrd. For some kinds of kernel (self-decompressing
32-bit kernels, and ELF images with a BSS section at the end)
we don't know the exact size, but even there we have a
minimum size. Put the initrd at least further into RAM than
that. For image formats that can give us an exact kernel size, this
will mean that we definitely avoid overlaying kernel and initrd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190516144733.32399-4-peter.maydell@linaro.org
---
hw/arm/boot.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index 5ddba727d45..a0e1110719e 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -1000,20 +1000,6 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
if (info->nb_cpus == 0)
info->nb_cpus = 1;
- /*
- * We want to put the initrd far enough into RAM that when the
- * kernel is uncompressed it will not clobber the initrd. However
- * on boards without much RAM we must ensure that we still leave
- * enough room for a decent sized initrd, and on boards with large
- * amounts of RAM we must avoid the initrd being so far up in RAM
- * that it is outside lowmem and inaccessible to the kernel.
- * So for boards with less than 256MB of RAM we put the initrd
- * halfway into RAM, and for boards with 256MB of RAM or more we put
- * the initrd at 128MB.
- */
- info->initrd_start = info->loader_start +
- MIN(info->ram_size / 2, 128 * 1024 * 1024);
-
/* Assume that raw images are linux kernels, and ELF images are not. */
kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr,
&elf_high_addr, elf_machine, as);
@@ -1065,6 +1051,26 @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
}
info->entry = entry;
+
+ /*
+ * We want to put the initrd far enough into RAM that when the
+ * kernel is uncompressed it will not clobber the initrd. However
+ * on boards without much RAM we must ensure that we still leave
+ * enough room for a decent sized initrd, and on boards with large
+ * amounts of RAM we must avoid the initrd being so far up in RAM
+ * that it is outside lowmem and inaccessible to the kernel.
+ * So for boards with less than 256MB of RAM we put the initrd
+ * halfway into RAM, and for boards with 256MB of RAM or more we put
+ * the initrd at 128MB.
+ * We also refuse to put the initrd somewhere that will definitely
+ * overlay the kernel we just loaded, though for kernel formats which
+ * don't tell us their exact size (eg self-decompressing 32-bit kernels)
+ * we might still make a bad choice here.
+ */
+ info->initrd_start = info->loader_start +
+ MAX(MIN(info->ram_size / 2, 128 * 1024 * 1024), kernel_size);
+ info->initrd_start = TARGET_PAGE_ALIGN(info->initrd_start);
+
if (is_linux) {
uint32_t fixupcontext[FIXUP_MAX];
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 04/24] hw/arm/boot: Honour image size field in AArch64 Image format kernels
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 03/24] hw/arm/boot: Avoid placing the initrd on top of the kernel Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 05/24] target/arm: Allow VFP and Neon to be disabled via a CPU property Peter Maydell
` (20 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
Since Linux v3.17, the kernel's Image header includes a field image_size,
which gives the total size of the kernel including unpopulated data
sections such as the BSS). If this is present, then return it from
load_aarch64_image() as the true size of the kernel rather than
just using the size of the Image file itself. This allows the code
which calculates where to put the initrd to avoid putting it in
the kernel's BSS area.
This means that we should be able to reliably load kernel images
which are larger than 128MB without accidentally putting the
initrd or dtb in locations that clash with the kernel itself.
Fixes: https://bugs.launchpad.net/qemu/+bug/1823998
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190516144733.32399-5-peter.maydell@linaro.org
---
hw/arm/boot.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index a0e1110719e..b2f93f6beff 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -911,6 +911,7 @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base,
hwaddr *entry, AddressSpace *as)
{
hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR;
+ uint64_t kernel_size = 0;
uint8_t *buffer;
int size;
@@ -938,7 +939,10 @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base,
* is only valid if the image_size is non-zero.
*/
memcpy(&hdrvals, buffer + ARM64_TEXT_OFFSET_OFFSET, sizeof(hdrvals));
- if (hdrvals[1] != 0) {
+
+ kernel_size = le64_to_cpu(hdrvals[1]);
+
+ if (kernel_size != 0) {
kernel_load_offset = le64_to_cpu(hdrvals[0]);
/*
@@ -956,12 +960,21 @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base,
}
}
+ /*
+ * Kernels before v3.17 don't populate the image_size field, and
+ * raw images have no header. For those our best guess at the size
+ * is the size of the Image file itself.
+ */
+ if (kernel_size == 0) {
+ kernel_size = size;
+ }
+
*entry = mem_base + kernel_load_offset;
rom_add_blob_fixed_as(filename, buffer, size, *entry, as);
g_free(buffer);
- return size;
+ return kernel_size;
}
static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 05/24] target/arm: Allow VFP and Neon to be disabled via a CPU property
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 04/24] hw/arm/boot: Honour image size field in AArch64 Image format kernels Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 06/24] target/arm: Allow M-profile CPUs to disable the DSP extension via " Peter Maydell
` (19 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
Allow VFP and neon to be disabled via a CPU property. As with
the "pmu" property, we only allow these features to be removed
from CPUs which have it by default, not added to CPUs which
don't have it.
The primary motivation here is to be able to optionally
create Cortex-M33 CPUs with no FPU, but we provide switches
for both VFP and Neon because the two interact:
* AArch64 can't have one without the other
* Some ID register fields only change if both are disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-2-peter.maydell@linaro.org
---
target/arm/cpu.h | 4 ++
target/arm/cpu.c | 150 +++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 148 insertions(+), 6 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 92298624215..cf2496aeeec 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -786,6 +786,10 @@ struct ARMCPU {
bool has_el3;
/* CPU has PMU (Performance Monitor Unit) */
bool has_pmu;
+ /* CPU has VFP */
+ bool has_vfp;
+ /* CPU has Neon */
+ bool has_neon;
/* CPU has memory protection unit */
bool has_mpu;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 2335659a852..af879d5311e 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -763,6 +763,12 @@ static Property arm_cpu_cfgend_property =
static Property arm_cpu_has_pmu_property =
DEFINE_PROP_BOOL("pmu", ARMCPU, has_pmu, true);
+static Property arm_cpu_has_vfp_property =
+ DEFINE_PROP_BOOL("vfp", ARMCPU, has_vfp, true);
+
+static Property arm_cpu_has_neon_property =
+ DEFINE_PROP_BOOL("neon", ARMCPU, has_neon, true);
+
static Property arm_cpu_has_mpu_property =
DEFINE_PROP_BOOL("has-mpu", ARMCPU, has_mpu, true);
@@ -803,6 +809,13 @@ void arm_cpu_post_init(Object *obj)
if (arm_feature(&cpu->env, ARM_FEATURE_M)) {
set_feature(&cpu->env, ARM_FEATURE_PMSA);
}
+ /* Similarly for the VFP feature bits */
+ if (arm_feature(&cpu->env, ARM_FEATURE_VFP4)) {
+ set_feature(&cpu->env, ARM_FEATURE_VFP3);
+ }
+ if (arm_feature(&cpu->env, ARM_FEATURE_VFP3)) {
+ set_feature(&cpu->env, ARM_FEATURE_VFP);
+ }
if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) ||
arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) {
@@ -847,6 +860,27 @@ void arm_cpu_post_init(Object *obj)
&error_abort);
}
+ /*
+ * Allow user to turn off VFP and Neon support, but only for TCG --
+ * KVM does not currently allow us to lie to the guest about its
+ * ID/feature registers, so the guest always sees what the host has.
+ */
+ if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) {
+ cpu->has_vfp = true;
+ if (!kvm_enabled()) {
+ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_vfp_property,
+ &error_abort);
+ }
+ }
+
+ if (arm_feature(&cpu->env, ARM_FEATURE_NEON)) {
+ cpu->has_neon = true;
+ if (!kvm_enabled()) {
+ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_neon_property,
+ &error_abort);
+ }
+ }
+
if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) {
qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property,
&error_abort);
@@ -956,6 +990,116 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
return;
}
+ if (arm_feature(env, ARM_FEATURE_AARCH64) &&
+ cpu->has_vfp != cpu->has_neon) {
+ /*
+ * This is an architectural requirement for AArch64; AArch32 is
+ * more flexible and permits VFP-no-Neon and Neon-no-VFP.
+ */
+ error_setg(errp,
+ "AArch64 CPUs must have both VFP and Neon or neither");
+ return;
+ }
+
+ if (!cpu->has_vfp) {
+ uint64_t t;
+ uint32_t u;
+
+ unset_feature(env, ARM_FEATURE_VFP);
+ unset_feature(env, ARM_FEATURE_VFP3);
+ unset_feature(env, ARM_FEATURE_VFP4);
+
+ t = cpu->isar.id_aa64isar1;
+ t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 0);
+ cpu->isar.id_aa64isar1 = t;
+
+ t = cpu->isar.id_aa64pfr0;
+ t = FIELD_DP64(t, ID_AA64PFR0, FP, 0xf);
+ cpu->isar.id_aa64pfr0 = t;
+
+ u = cpu->isar.id_isar6;
+ u = FIELD_DP32(u, ID_ISAR6, JSCVT, 0);
+ cpu->isar.id_isar6 = u;
+
+ u = cpu->isar.mvfr0;
+ u = FIELD_DP32(u, MVFR0, FPSP, 0);
+ u = FIELD_DP32(u, MVFR0, FPDP, 0);
+ u = FIELD_DP32(u, MVFR0, FPTRAP, 0);
+ u = FIELD_DP32(u, MVFR0, FPDIVIDE, 0);
+ u = FIELD_DP32(u, MVFR0, FPSQRT, 0);
+ u = FIELD_DP32(u, MVFR0, FPSHVEC, 0);
+ u = FIELD_DP32(u, MVFR0, FPROUND, 0);
+ cpu->isar.mvfr0 = u;
+
+ u = cpu->isar.mvfr1;
+ u = FIELD_DP32(u, MVFR1, FPFTZ, 0);
+ u = FIELD_DP32(u, MVFR1, FPDNAN, 0);
+ u = FIELD_DP32(u, MVFR1, FPHP, 0);
+ cpu->isar.mvfr1 = u;
+
+ u = cpu->isar.mvfr2;
+ u = FIELD_DP32(u, MVFR2, FPMISC, 0);
+ cpu->isar.mvfr2 = u;
+ }
+
+ if (!cpu->has_neon) {
+ uint64_t t;
+ uint32_t u;
+
+ unset_feature(env, ARM_FEATURE_NEON);
+
+ t = cpu->isar.id_aa64isar0;
+ t = FIELD_DP64(t, ID_AA64ISAR0, DP, 0);
+ cpu->isar.id_aa64isar0 = t;
+
+ t = cpu->isar.id_aa64isar1;
+ t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 0);
+ cpu->isar.id_aa64isar1 = t;
+
+ t = cpu->isar.id_aa64pfr0;
+ t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 0xf);
+ cpu->isar.id_aa64pfr0 = t;
+
+ u = cpu->isar.id_isar5;
+ u = FIELD_DP32(u, ID_ISAR5, RDM, 0);
+ u = FIELD_DP32(u, ID_ISAR5, VCMA, 0);
+ cpu->isar.id_isar5 = u;
+
+ u = cpu->isar.id_isar6;
+ u = FIELD_DP32(u, ID_ISAR6, DP, 0);
+ u = FIELD_DP32(u, ID_ISAR6, FHM, 0);
+ cpu->isar.id_isar6 = u;
+
+ u = cpu->isar.mvfr1;
+ u = FIELD_DP32(u, MVFR1, SIMDLS, 0);
+ u = FIELD_DP32(u, MVFR1, SIMDINT, 0);
+ u = FIELD_DP32(u, MVFR1, SIMDSP, 0);
+ u = FIELD_DP32(u, MVFR1, SIMDHP, 0);
+ u = FIELD_DP32(u, MVFR1, SIMDFMAC, 0);
+ cpu->isar.mvfr1 = u;
+
+ u = cpu->isar.mvfr2;
+ u = FIELD_DP32(u, MVFR2, SIMDMISC, 0);
+ cpu->isar.mvfr2 = u;
+ }
+
+ if (!cpu->has_neon && !cpu->has_vfp) {
+ uint64_t t;
+ uint32_t u;
+
+ t = cpu->isar.id_aa64isar0;
+ t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 0);
+ cpu->isar.id_aa64isar0 = t;
+
+ t = cpu->isar.id_aa64isar1;
+ t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 0);
+ cpu->isar.id_aa64isar1 = t;
+
+ u = cpu->isar.mvfr0;
+ u = FIELD_DP32(u, MVFR0, SIMDREG, 0);
+ cpu->isar.mvfr0 = u;
+ }
+
/* Some features automatically imply others: */
if (arm_feature(env, ARM_FEATURE_V8)) {
if (arm_feature(env, ARM_FEATURE_M)) {
@@ -1016,12 +1160,6 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
if (arm_feature(env, ARM_FEATURE_V5)) {
set_feature(env, ARM_FEATURE_V4T);
}
- if (arm_feature(env, ARM_FEATURE_VFP4)) {
- set_feature(env, ARM_FEATURE_VFP3);
- }
- if (arm_feature(env, ARM_FEATURE_VFP3)) {
- set_feature(env, ARM_FEATURE_VFP);
- }
if (arm_feature(env, ARM_FEATURE_LPAE)) {
set_feature(env, ARM_FEATURE_V7MP);
set_feature(env, ARM_FEATURE_PXN);
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 06/24] target/arm: Allow M-profile CPUs to disable the DSP extension via CPU property
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 05/24] target/arm: Allow VFP and Neon to be disabled via a CPU property Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 07/24] hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU Peter Maydell
` (18 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
Allow the DSP extension to be disabled via a CPU property for
M-profile CPUs. (A and R-profile CPUs don't have this extension
as a defined separate optional architecture extension, so
they don't need the property.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-3-peter.maydell@linaro.org
---
target/arm/cpu.h | 2 ++
target/arm/cpu.c | 29 +++++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index cf2496aeeec..a98c45b1ff0 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -790,6 +790,8 @@ struct ARMCPU {
bool has_vfp;
/* CPU has Neon */
bool has_neon;
+ /* CPU has M-profile DSP extension */
+ bool has_dsp;
/* CPU has memory protection unit */
bool has_mpu;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index af879d5311e..376db154f00 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -769,6 +769,9 @@ static Property arm_cpu_has_vfp_property =
static Property arm_cpu_has_neon_property =
DEFINE_PROP_BOOL("neon", ARMCPU, has_neon, true);
+static Property arm_cpu_has_dsp_property =
+ DEFINE_PROP_BOOL("dsp", ARMCPU, has_dsp, true);
+
static Property arm_cpu_has_mpu_property =
DEFINE_PROP_BOOL("has-mpu", ARMCPU, has_mpu, true);
@@ -881,6 +884,12 @@ void arm_cpu_post_init(Object *obj)
}
}
+ if (arm_feature(&cpu->env, ARM_FEATURE_M) &&
+ arm_feature(&cpu->env, ARM_FEATURE_THUMB_DSP)) {
+ qdev_property_add_static(DEVICE(obj), &arm_cpu_has_dsp_property,
+ &error_abort);
+ }
+
if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) {
qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property,
&error_abort);
@@ -1100,6 +1109,26 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
cpu->isar.mvfr0 = u;
}
+ if (arm_feature(env, ARM_FEATURE_M) && !cpu->has_dsp) {
+ uint32_t u;
+
+ unset_feature(env, ARM_FEATURE_THUMB_DSP);
+
+ u = cpu->isar.id_isar1;
+ u = FIELD_DP32(u, ID_ISAR1, EXTEND, 1);
+ cpu->isar.id_isar1 = u;
+
+ u = cpu->isar.id_isar2;
+ u = FIELD_DP32(u, ID_ISAR2, MULTU, 1);
+ u = FIELD_DP32(u, ID_ISAR2, MULTS, 1);
+ cpu->isar.id_isar2 = u;
+
+ u = cpu->isar.id_isar3;
+ u = FIELD_DP32(u, ID_ISAR3, SIMD, 1);
+ u = FIELD_DP32(u, ID_ISAR3, SATURATE, 0);
+ cpu->isar.id_isar3 = u;
+ }
+
/* Some features automatically imply others: */
if (arm_feature(env, ARM_FEATURE_V8)) {
if (arm_feature(env, ARM_FEATURE_M)) {
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 07/24] hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 06/24] target/arm: Allow M-profile CPUs to disable the DSP extension via " Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 08/24] hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards Peter Maydell
` (17 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
Create "vfp" and "dsp" properties on the armv7m container object
which will be forwarded to its CPU object, so that SoCs can
configure whether the CPU has these features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-4-peter.maydell@linaro.org
---
include/hw/arm/armv7m.h | 4 ++++
hw/arm/armv7m.c | 18 ++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h
index e96a98f8093..d2c74d3872a 100644
--- a/include/hw/arm/armv7m.h
+++ b/include/hw/arm/armv7m.h
@@ -43,6 +43,8 @@ typedef struct {
* devices will be automatically layered on top of this view.)
* + Property "idau": IDAU interface (forwarded to CPU object)
* + Property "init-svtor": secure VTOR reset value (forwarded to CPU object)
+ * + Property "vfp": enable VFP (forwarded to CPU object)
+ * + Property "dsp": enable DSP (forwarded to CPU object)
* + Property "enable-bitband": expose bitbanded IO
*/
typedef struct ARMv7MState {
@@ -66,6 +68,8 @@ typedef struct ARMv7MState {
uint32_t init_svtor;
bool enable_bitband;
bool start_powered_off;
+ bool vfp;
+ bool dsp;
} ARMv7MState;
#endif
diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index 1a8a6c8bf92..b9efad6bac9 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -190,6 +190,22 @@ static void armv7m_realize(DeviceState *dev, Error **errp)
return;
}
}
+ if (object_property_find(OBJECT(s->cpu), "vfp", NULL)) {
+ object_property_set_bool(OBJECT(s->cpu), s->vfp,
+ "vfp", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ }
+ if (object_property_find(OBJECT(s->cpu), "dsp", NULL)) {
+ object_property_set_bool(OBJECT(s->cpu), s->dsp,
+ "dsp", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ }
/*
* Tell the CPU where the NVIC is; it will fail realize if it doesn't
@@ -260,6 +276,8 @@ static Property armv7m_properties[] = {
DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false),
DEFINE_PROP_BOOL("start-powered-off", ARMv7MState, start_powered_off,
false),
+ DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true),
+ DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true),
DEFINE_PROP_END_OF_LIST(),
};
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 08/24] hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 07/24] hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 09/24] hw/intc/arm_gicv3: Fix decoding of ID register range Peter Maydell
` (16 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
The SSE-200 hardware has configurable integration settings which
determine whether its two CPUs have the FPU and DSP:
* CPU0_FPU (default 0)
* CPU0_DSP (default 0)
* CPU1_FPU (default 1)
* CPU1_DSP (default 1)
Similarly, the IoTKit has settings for its single CPU:
* CPU0_FPU (default 1)
* CPU0_DSP (default 1)
Of our four boards that use either the IoTKit or the SSE-200:
* mps2-an505, mps2-an521 and musca-a use the default settings
* musca-b1 enables FPU and DSP on both CPUs
Currently QEMU models all these boards using CPUs with
both FPU and DSP enabled. This means that we are incorrect
for mps2-an521 and musca-a, which should not have FPU or DSP
on CPU0.
Create QOM properties on the ARMSSE devices corresponding to the
default h/w integration settings, and make the Musca-B1 board
enable FPU and DSP on both CPUs. This fixes the mps2-an521
and musca-a behaviour, and leaves the musca-b1 and mps2-an505
behaviour unchanged.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-5-peter.maydell@linaro.org
---
include/hw/arm/armsse.h | 7 +++++
hw/arm/armsse.c | 58 ++++++++++++++++++++++++++++++++---------
hw/arm/musca.c | 8 ++++++
3 files changed, 61 insertions(+), 12 deletions(-)
diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index 81e082cccf8..84080c22993 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -50,6 +50,11 @@
* address of each SRAM bank (and thus the total amount of internal SRAM)
* + QOM property "init-svtor" sets the initial value of the CPU SVTOR register
* (where it expects to load the PC and SP from the vector table on reset)
+ * + QOM properties "CPU0_FPU", "CPU0_DSP", "CPU1_FPU" and "CPU1_DSP" which
+ * set whether the CPUs have the FPU and DSP features present. The default
+ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an
+ * SSE-200 both are present; CPU0 in an SSE-200 has neither.
+ * Since the IoTKit has only one CPU, it does not have the CPU1_* properties.
* + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0,
* which are wired to its NVIC lines 32 .. n+32
* + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for
@@ -208,6 +213,8 @@ typedef struct ARMSSE {
uint32_t mainclk_frq;
uint32_t sram_addr_width;
uint32_t init_svtor;
+ bool cpu_fpu[SSE_MAX_CPUS];
+ bool cpu_dsp[SSE_MAX_CPUS];
} ARMSSE;
typedef struct ARMSSEInfo ARMSSEInfo;
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 47d13312dc1..b5c614cc3a1 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -38,6 +38,33 @@ struct ARMSSEInfo {
bool has_cachectrl;
bool has_cpusecctrl;
bool has_cpuid;
+ Property *props;
+};
+
+static Property iotkit_properties[] = {
+ DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
+ MemoryRegion *),
+ DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
+ DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0),
+ DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
+ DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
+ DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true),
+ DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static Property armsse_properties[] = {
+ DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
+ MemoryRegion *),
+ DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
+ DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0),
+ DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
+ DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
+ DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false),
+ DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false),
+ DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true),
+ DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true),
+ DEFINE_PROP_END_OF_LIST()
};
static const ARMSSEInfo armsse_variants[] = {
@@ -53,6 +80,7 @@ static const ARMSSEInfo armsse_variants[] = {
.has_cachectrl = false,
.has_cpusecctrl = false,
.has_cpuid = false,
+ .props = iotkit_properties,
},
{
.name = TYPE_SSE200,
@@ -66,6 +94,7 @@ static const ARMSSEInfo armsse_variants[] = {
.has_cachectrl = true,
.has_cpusecctrl = true,
.has_cpuid = true,
+ .props = armsse_properties,
},
};
@@ -533,6 +562,20 @@ static void armsse_realize(DeviceState *dev, Error **errp)
return;
}
}
+ if (!s->cpu_fpu[i]) {
+ object_property_set_bool(cpuobj, false, "vfp", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ }
+ if (!s->cpu_dsp[i]) {
+ object_property_set_bool(cpuobj, false, "dsp", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ }
if (i > 0) {
memory_region_add_subregion_overlap(&s->cpu_container[i], 0,
@@ -1222,16 +1265,6 @@ static const VMStateDescription armsse_vmstate = {
}
};
-static Property armsse_properties[] = {
- DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
- MemoryRegion *),
- DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
- DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0),
- DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
- DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
- DEFINE_PROP_END_OF_LIST()
-};
-
static void armsse_reset(DeviceState *dev)
{
ARMSSE *s = ARMSSE(dev);
@@ -1244,13 +1277,14 @@ static void armsse_class_init(ObjectClass *klass, void *data)
DeviceClass *dc = DEVICE_CLASS(klass);
IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass);
ARMSSEClass *asc = ARMSSE_CLASS(klass);
+ const ARMSSEInfo *info = data;
dc->realize = armsse_realize;
dc->vmsd = &armsse_vmstate;
- dc->props = armsse_properties;
+ dc->props = info->props;
dc->reset = armsse_reset;
iic->check = armsse_idau_check;
- asc->info = data;
+ asc->info = info;
}
static const TypeInfo armsse_info = {
diff --git a/hw/arm/musca.c b/hw/arm/musca.c
index 825d80e75a4..ddd8842732c 100644
--- a/hw/arm/musca.c
+++ b/hw/arm/musca.c
@@ -385,6 +385,14 @@ static void musca_init(MachineState *machine)
qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor);
qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ);
+ /*
+ * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for
+ * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0.
+ */
+ if (mmc->type == MUSCA_B1) {
+ qdev_prop_set_bit(ssedev, "CPU0_FPU", true);
+ qdev_prop_set_bit(ssedev, "CPU0_DSP", true);
+ }
object_property_set_bool(OBJECT(&mms->sse), true, "realized",
&error_fatal);
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 09/24] hw/intc/arm_gicv3: Fix decoding of ID register range
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 08/24] hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 10/24] hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1 Peter Maydell
` (15 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
The GIC ID registers cover an area 0x30 bytes in size
(12 registers, 4 bytes each). We were incorrectly decoding
only the first 0x20 bytes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190524124248.28394-2-peter.maydell@linaro.org
---
hw/intc/arm_gicv3_dist.c | 4 ++--
hw/intc/arm_gicv3_redist.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 53c55c57291..e6fe4905fd3 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -533,7 +533,7 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
}
return MEMTX_OK;
}
- case GICD_IDREGS ... GICD_IDREGS + 0x1f:
+ case GICD_IDREGS ... GICD_IDREGS + 0x2f:
/* ID registers */
*data = gicv3_idreg(offset - GICD_IDREGS);
return MEMTX_OK;
@@ -744,7 +744,7 @@ static MemTxResult gicd_writel(GICv3State *s, hwaddr offset,
gicd_write_irouter(s, attrs, irq, r);
return MEMTX_OK;
}
- case GICD_IDREGS ... GICD_IDREGS + 0x1f:
+ case GICD_IDREGS ... GICD_IDREGS + 0x2f:
case GICD_TYPER:
case GICD_IIDR:
/* RO registers, ignore the write */
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 3b0ba6de1ab..8645220d618 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -233,7 +233,7 @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset,
}
*data = cs->gicr_nsacr;
return MEMTX_OK;
- case GICR_IDREGS ... GICR_IDREGS + 0x1f:
+ case GICR_IDREGS ... GICR_IDREGS + 0x2f:
*data = gicv3_idreg(offset - GICR_IDREGS);
return MEMTX_OK;
default:
@@ -363,7 +363,7 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
return MEMTX_OK;
case GICR_IIDR:
case GICR_TYPER:
- case GICR_IDREGS ... GICR_IDREGS + 0x1f:
+ case GICR_IDREGS ... GICR_IDREGS + 0x2f:
/* RO registers, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 10/24] hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 09/24] hw/intc/arm_gicv3: Fix decoding of ID register range Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 11/24] target/arm: Move vfp_expand_imm() to translate.[ch] Peter Maydell
` (14 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
The GICv3 specification says that the GICD_TYPER.SecurityExtn bit
is RAZ if GICD_CTLR.DS is 1. We were incorrectly making it RAZ
if the security extension is unsupported. "Security extension
unsupported" always implies GICD_CTLR.DS == 1, but the guest can
also set DS on a GIC which does support the security extension.
Fix the condition to correctly check the GICD_CTLR.DS bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190524124248.28394-3-peter.maydell@linaro.org
---
hw/intc/arm_gicv3_dist.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index e6fe4905fd3..b65f56f9035 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -378,8 +378,14 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
* ITLinesNumber == (num external irqs / 32) - 1
*/
int itlinesnumber = ((s->num_irq - GIC_INTERNAL) / 32) - 1;
+ /*
+ * SecurityExtn must be RAZ if GICD_CTLR.DS == 1, and
+ * "security extensions not supported" always implies DS == 1,
+ * so we only need to check the DS bit.
+ */
+ bool sec_extn = !(s->gicd_ctlr & GICD_CTLR_DS);
- *data = (1 << 25) | (1 << 24) | (s->security_extn << 10) |
+ *data = (1 << 25) | (1 << 24) | (sec_extn << 10) |
(0xf << 19) | itlinesnumber;
return MEMTX_OK;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 11/24] target/arm: Move vfp_expand_imm() to translate.[ch]
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 10/24] hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1 Peter Maydell
@ 2019-06-17 14:33 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 12/24] target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm Peter Maydell
` (13 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:33 UTC (permalink / raw)
To: qemu-devel
We want to use vfp_expand_imm() in the AArch32 VFP decode;
move it from the a64-only header/source file to the
AArch32 one (which is always compiled even for AArch64).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-2-peter.maydell@linaro.org
---
target/arm/translate-a64.h | 1 -
target/arm/translate.h | 7 +++++++
target/arm/translate-a64.c | 32 --------------------------------
target/arm/translate-vfp.inc.c | 33 +++++++++++++++++++++++++++++++++
4 files changed, 40 insertions(+), 33 deletions(-)
diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h
index 9569bc5963d..9ab40872d85 100644
--- a/target/arm/translate-a64.h
+++ b/target/arm/translate-a64.h
@@ -39,7 +39,6 @@ void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v);
TCGv_ptr get_fpstatus_ptr(bool);
bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn,
unsigned int imms, unsigned int immr);
-uint64_t vfp_expand_imm(int size, uint8_t imm8);
bool sve_access_check(DisasContext *s);
/* We should have at some point before trying to access an FP register
diff --git a/target/arm/translate.h b/target/arm/translate.h
index dc06dce7675..bc1617809da 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -237,6 +237,13 @@ static inline void gen_ss_advance(DisasContext *s)
}
}
+/*
+ * Given a VFP floating point constant encoded into an 8 bit immediate in an
+ * instruction, expand it to the actual constant value of the specified
+ * size, as per the VFPExpandImm() pseudocode in the Arm ARM.
+ */
+uint64_t vfp_expand_imm(int size, uint8_t imm8);
+
/* Vector operations shared between ARM and AArch64. */
extern const GVecGen3 mla_op[4];
extern const GVecGen3 mls_op[4];
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index ae739f65756..97f4164fbbc 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -6380,38 +6380,6 @@ static void disas_fp_3src(DisasContext *s, uint32_t insn)
}
}
-/* The imm8 encodes the sign bit, enough bits to represent an exponent in
- * the range 01....1xx to 10....0xx, and the most significant 4 bits of
- * the mantissa; see VFPExpandImm() in the v8 ARM ARM.
- */
-uint64_t vfp_expand_imm(int size, uint8_t imm8)
-{
- uint64_t imm;
-
- switch (size) {
- case MO_64:
- imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
- (extract32(imm8, 6, 1) ? 0x3fc0 : 0x4000) |
- extract32(imm8, 0, 6);
- imm <<= 48;
- break;
- case MO_32:
- imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
- (extract32(imm8, 6, 1) ? 0x3e00 : 0x4000) |
- (extract32(imm8, 0, 6) << 3);
- imm <<= 16;
- break;
- case MO_16:
- imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
- (extract32(imm8, 6, 1) ? 0x3000 : 0x4000) |
- (extract32(imm8, 0, 6) << 6);
- break;
- default:
- g_assert_not_reached();
- }
- return imm;
-}
-
/* Floating point immediate
* 31 30 29 28 24 23 22 21 20 13 12 10 9 5 4 0
* +---+---+---+-----------+------+---+------------+-------+------+------+
diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c
index 709fc65374d..a66084f6e36 100644
--- a/target/arm/translate-vfp.inc.c
+++ b/target/arm/translate-vfp.inc.c
@@ -30,6 +30,39 @@
#include "decode-vfp.inc.c"
#include "decode-vfp-uncond.inc.c"
+/*
+ * The imm8 encodes the sign bit, enough bits to represent an exponent in
+ * the range 01....1xx to 10....0xx, and the most significant 4 bits of
+ * the mantissa; see VFPExpandImm() in the v8 ARM ARM.
+ */
+uint64_t vfp_expand_imm(int size, uint8_t imm8)
+{
+ uint64_t imm;
+
+ switch (size) {
+ case MO_64:
+ imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+ (extract32(imm8, 6, 1) ? 0x3fc0 : 0x4000) |
+ extract32(imm8, 0, 6);
+ imm <<= 48;
+ break;
+ case MO_32:
+ imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+ (extract32(imm8, 6, 1) ? 0x3e00 : 0x4000) |
+ (extract32(imm8, 0, 6) << 3);
+ imm <<= 16;
+ break;
+ case MO_16:
+ imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+ (extract32(imm8, 6, 1) ? 0x3000 : 0x4000) |
+ (extract32(imm8, 0, 6) << 6);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ return imm;
+}
+
/*
* Return the offset of a 16-bit half of the specified VFP single-precision
* register. If top is true, returns the top 16 bits; otherwise the bottom
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 12/24] target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2019-06-17 14:33 ` [Qemu-devel] [PULL 11/24] target/arm: Move vfp_expand_imm() to translate.[ch] Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 13/24] target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F Peter Maydell
` (12 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
The AArch32 VMOV (immediate) instruction uses the same VFP encoded
immediate format we already handle in vfp_expand_imm(). Use that
function rather than hand-decoding it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-3-peter.maydell@linaro.org
---
target/arm/translate-vfp.inc.c | 28 ++++------------------------
target/arm/vfp.decode | 10 ++++++----
2 files changed, 10 insertions(+), 28 deletions(-)
diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c
index a66084f6e36..8b732761f26 100644
--- a/target/arm/translate-vfp.inc.c
+++ b/target/arm/translate-vfp.inc.c
@@ -1842,7 +1842,7 @@ static bool trans_VMOV_imm_sp(DisasContext *s, arg_VMOV_imm_sp *a)
uint32_t delta_d = 0;
int veclen = s->vec_len;
TCGv_i32 fd;
- uint32_t n, i, vd;
+ uint32_t vd;
vd = a->vd;
@@ -1869,17 +1869,7 @@ static bool trans_VMOV_imm_sp(DisasContext *s, arg_VMOV_imm_sp *a)
}
}
- n = (a->imm4h << 28) & 0x80000000;
- i = ((a->imm4h << 4) & 0x70) | a->imm4l;
- if (i & 0x40) {
- i |= 0x780;
- } else {
- i |= 0x800;
- }
- n |= i << 19;
-
- fd = tcg_temp_new_i32();
- tcg_gen_movi_i32(fd, n);
+ fd = tcg_const_i32(vfp_expand_imm(MO_32, a->imm));
for (;;) {
neon_store_reg32(fd, vd);
@@ -1902,7 +1892,7 @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a)
uint32_t delta_d = 0;
int veclen = s->vec_len;
TCGv_i64 fd;
- uint32_t n, i, vd;
+ uint32_t vd;
vd = a->vd;
@@ -1934,17 +1924,7 @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a)
}
}
- n = (a->imm4h << 28) & 0x80000000;
- i = ((a->imm4h << 4) & 0x70) | a->imm4l;
- if (i & 0x40) {
- i |= 0x3f80;
- } else {
- i |= 0x4000;
- }
- n |= i << 16;
-
- fd = tcg_temp_new_i64();
- tcg_gen_movi_i64(fd, ((uint64_t)n) << 32);
+ fd = tcg_const_i64(vfp_expand_imm(MO_64, a->imm));
for (;;) {
neon_store_reg64(fd, vd);
diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode
index ea24365bb4c..a67b3f29ee5 100644
--- a/target/arm/vfp.decode
+++ b/target/arm/vfp.decode
@@ -44,6 +44,8 @@
%vmov_idx_b 21:1 5:2
%vmov_idx_h 21:1 6:1
+%vmov_imm 16:4 0:4
+
# VMOV scalar to general-purpose register; note that this does
# include some Neon cases.
VMOV_to_gp ---- 1110 u:1 1. 1 .... rt:4 1011 ... 1 0000 \
@@ -152,10 +154,10 @@ VFM_sp ---- 1110 1.10 .... .... 1010 . o2:1 . 0 .... \
VFM_dp ---- 1110 1.10 .... .... 1011 . o2:1 . 0 .... \
vm=%vm_dp vn=%vn_dp vd=%vd_dp o1=2
-VMOV_imm_sp ---- 1110 1.11 imm4h:4 .... 1010 0000 imm4l:4 \
- vd=%vd_sp
-VMOV_imm_dp ---- 1110 1.11 imm4h:4 .... 1011 0000 imm4l:4 \
- vd=%vd_dp
+VMOV_imm_sp ---- 1110 1.11 .... .... 1010 0000 .... \
+ vd=%vd_sp imm=%vmov_imm
+VMOV_imm_dp ---- 1110 1.11 .... .... 1011 0000 .... \
+ vd=%vd_dp imm=%vmov_imm
VMOV_reg_sp ---- 1110 1.11 0000 .... 1010 01.0 .... \
vd=%vd_sp vm=%vm_sp
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 13/24] target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 12/24] target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 14/24] target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F Peter Maydell
` (11 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Where Neon instructions are floating point operations, we
mostly use the old VFP utility functions like gen_vfp_abs()
which work on the TCG globals cpu_F0s and cpu_F1s. The
Neon for-each-element loop conditionally loads the inputs
into either a plain old TCG temporary for most operations
or into cpu_F0s for float operations, and similarly stores
back either cpu_F0s or the temporary.
Switch NEON_2RM_VABS_F away from using cpu_F0s, and
update neon_2rm_is_float_op() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-4-peter.maydell@linaro.org
---
target/arm/translate.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index c274c8b4602..a10fded1f39 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1374,14 +1374,6 @@ static TCGv_ptr get_fpstatus_ptr(int neon)
return statusptr;
}
-static inline void gen_vfp_abs(int dp)
-{
- if (dp)
- gen_helper_vfp_absd(cpu_F0d, cpu_F0d);
- else
- gen_helper_vfp_abss(cpu_F0s, cpu_F0s);
-}
-
static inline void gen_vfp_neg(int dp)
{
if (dp)
@@ -4191,8 +4183,13 @@ static const uint8_t neon_3r_sizes[] = {
static int neon_2rm_is_float_op(int op)
{
- /* Return true if this neon 2reg-misc op is float-to-float */
- return (op == NEON_2RM_VABS_F || op == NEON_2RM_VNEG_F ||
+ /*
+ * Return true if this neon 2reg-misc op is float-to-float.
+ * This is not a property of the operation but of our code --
+ * what we are asking here is "does the code for this case in
+ * the Neon for-each-pass loop use cpu_F0s?".
+ */
+ return (op == NEON_2RM_VNEG_F ||
(op >= NEON_2RM_VRINTN && op <= NEON_2RM_VRINTZ) ||
op == NEON_2RM_VRINTM ||
(op >= NEON_2RM_VRINTP && op <= NEON_2RM_VCVTMS) ||
@@ -6761,7 +6758,7 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
break;
}
case NEON_2RM_VABS_F:
- gen_vfp_abs(0);
+ gen_helper_vfp_abss(tmp, tmp);
break;
case NEON_2RM_VNEG_F:
gen_vfp_neg(0);
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 14/24] target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 13/24] target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 15/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRINT* Peter Maydell
` (10 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Switch NEON_2RM_VABS_F away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-5-peter.maydell@linaro.org
---
target/arm/translate.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index a10fded1f39..a006ab498e7 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1374,14 +1374,6 @@ static TCGv_ptr get_fpstatus_ptr(int neon)
return statusptr;
}
-static inline void gen_vfp_neg(int dp)
-{
- if (dp)
- gen_helper_vfp_negd(cpu_F0d, cpu_F0d);
- else
- gen_helper_vfp_negs(cpu_F0s, cpu_F0s);
-}
-
#define VFP_GEN_ITOF(name) \
static inline void gen_vfp_##name(int dp, int neon) \
{ \
@@ -4189,8 +4181,7 @@ static int neon_2rm_is_float_op(int op)
* what we are asking here is "does the code for this case in
* the Neon for-each-pass loop use cpu_F0s?".
*/
- return (op == NEON_2RM_VNEG_F ||
- (op >= NEON_2RM_VRINTN && op <= NEON_2RM_VRINTZ) ||
+ return ((op >= NEON_2RM_VRINTN && op <= NEON_2RM_VRINTZ) ||
op == NEON_2RM_VRINTM ||
(op >= NEON_2RM_VRINTP && op <= NEON_2RM_VCVTMS) ||
op >= NEON_2RM_VRECPE_F);
@@ -6761,7 +6752,7 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
gen_helper_vfp_abss(tmp, tmp);
break;
case NEON_2RM_VNEG_F:
- gen_vfp_neg(0);
+ gen_helper_vfp_negs(tmp, tmp);
break;
case NEON_2RM_VSWP:
tmp2 = neon_load_reg(rd, pass);
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 15/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRINT*
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 14/24] target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 16/24] target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US] Peter Maydell
` (9 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Switch NEON_2RM_VRINT* away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-6-peter.maydell@linaro.org
---
target/arm/translate.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index a006ab498e7..243dbee8357 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -4181,9 +4181,7 @@ static int neon_2rm_is_float_op(int op)
* what we are asking here is "does the code for this case in
* the Neon for-each-pass loop use cpu_F0s?".
*/
- return ((op >= NEON_2RM_VRINTN && op <= NEON_2RM_VRINTZ) ||
- op == NEON_2RM_VRINTM ||
- (op >= NEON_2RM_VRINTP && op <= NEON_2RM_VCVTMS) ||
+ return ((op >= NEON_2RM_VCVTAU && op <= NEON_2RM_VCVTMS) ||
op >= NEON_2RM_VRECPE_F);
}
@@ -6786,7 +6784,7 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode));
gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode,
cpu_env);
- gen_helper_rints(cpu_F0s, cpu_F0s, fpstatus);
+ gen_helper_rints(tmp, tmp, fpstatus);
gen_helper_set_neon_rmode(tcg_rmode, tcg_rmode,
cpu_env);
tcg_temp_free_ptr(fpstatus);
@@ -6796,7 +6794,7 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
case NEON_2RM_VRINTX:
{
TCGv_ptr fpstatus = get_fpstatus_ptr(1);
- gen_helper_rints_exact(cpu_F0s, cpu_F0s, fpstatus);
+ gen_helper_rints_exact(tmp, tmp, fpstatus);
tcg_temp_free_ptr(fpstatus);
break;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 16/24] target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US]
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 15/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRINT* Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 17/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F Peter Maydell
` (8 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Stop using cpu_F0s for the NEON_2RM_VCVT[ANPM][US] ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-7-peter.maydell@linaro.org
---
target/arm/translate.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 243dbee8357..124045a9ef6 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -4181,8 +4181,7 @@ static int neon_2rm_is_float_op(int op)
* what we are asking here is "does the code for this case in
* the Neon for-each-pass loop use cpu_F0s?".
*/
- return ((op >= NEON_2RM_VCVTAU && op <= NEON_2RM_VCVTMS) ||
- op >= NEON_2RM_VRECPE_F);
+ return op >= NEON_2RM_VRECPE_F;
}
static bool neon_2rm_is_v8_op(int op)
@@ -6818,10 +6817,10 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
cpu_env);
if (is_signed) {
- gen_helper_vfp_tosls(cpu_F0s, cpu_F0s,
+ gen_helper_vfp_tosls(tmp, tmp,
tcg_shift, fpst);
} else {
- gen_helper_vfp_touls(cpu_F0s, cpu_F0s,
+ gen_helper_vfp_touls(tmp, tmp,
tcg_shift, fpst);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 17/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 16/24] target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US] Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 18/24] target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT Peter Maydell
` (7 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-8-peter.maydell@linaro.org
---
target/arm/translate.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 124045a9ef6..75ed7cc7cb0 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -4181,7 +4181,7 @@ static int neon_2rm_is_float_op(int op)
* what we are asking here is "does the code for this case in
* the Neon for-each-pass loop use cpu_F0s?".
*/
- return op >= NEON_2RM_VRECPE_F;
+ return op >= NEON_2RM_VCVT_FS;
}
static bool neon_2rm_is_v8_op(int op)
@@ -6848,14 +6848,14 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
case NEON_2RM_VRECPE_F:
{
TCGv_ptr fpstatus = get_fpstatus_ptr(1);
- gen_helper_recpe_f32(cpu_F0s, cpu_F0s, fpstatus);
+ gen_helper_recpe_f32(tmp, tmp, fpstatus);
tcg_temp_free_ptr(fpstatus);
break;
}
case NEON_2RM_VRSQRTE_F:
{
TCGv_ptr fpstatus = get_fpstatus_ptr(1);
- gen_helper_rsqrte_f32(cpu_F0s, cpu_F0s, fpstatus);
+ gen_helper_rsqrte_f32(tmp, tmp, fpstatus);
tcg_temp_free_ptr(fpstatus);
break;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 18/24] target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 17/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 19/24] target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops Peter Maydell
` (6 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Stop using cpu_F0s for the Neon f32/s32 VCVT operations.
Since this is the last user of cpu_F0s in the Neon 2rm-op
loop, we can remove the handling code for it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-9-peter.maydell@linaro.org
---
target/arm/translate.c | 82 ++++++++++++------------------------------
1 file changed, 22 insertions(+), 60 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 75ed7cc7cb0..0fb94b777bf 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1374,38 +1374,6 @@ static TCGv_ptr get_fpstatus_ptr(int neon)
return statusptr;
}
-#define VFP_GEN_ITOF(name) \
-static inline void gen_vfp_##name(int dp, int neon) \
-{ \
- TCGv_ptr statusptr = get_fpstatus_ptr(neon); \
- if (dp) { \
- gen_helper_vfp_##name##d(cpu_F0d, cpu_F0s, statusptr); \
- } else { \
- gen_helper_vfp_##name##s(cpu_F0s, cpu_F0s, statusptr); \
- } \
- tcg_temp_free_ptr(statusptr); \
-}
-
-VFP_GEN_ITOF(uito)
-VFP_GEN_ITOF(sito)
-#undef VFP_GEN_ITOF
-
-#define VFP_GEN_FTOI(name) \
-static inline void gen_vfp_##name(int dp, int neon) \
-{ \
- TCGv_ptr statusptr = get_fpstatus_ptr(neon); \
- if (dp) { \
- gen_helper_vfp_##name##d(cpu_F0s, cpu_F0d, statusptr); \
- } else { \
- gen_helper_vfp_##name##s(cpu_F0s, cpu_F0s, statusptr); \
- } \
- tcg_temp_free_ptr(statusptr); \
-}
-
-VFP_GEN_FTOI(touiz)
-VFP_GEN_FTOI(tosiz)
-#undef VFP_GEN_FTOI
-
#define VFP_GEN_FIX(name, round) \
static inline void gen_vfp_##name(int dp, int shift, int neon) \
{ \
@@ -4173,17 +4141,6 @@ static const uint8_t neon_3r_sizes[] = {
#define NEON_2RM_VCVT_SF 62
#define NEON_2RM_VCVT_UF 63
-static int neon_2rm_is_float_op(int op)
-{
- /*
- * Return true if this neon 2reg-misc op is float-to-float.
- * This is not a property of the operation but of our code --
- * what we are asking here is "does the code for this case in
- * the Neon for-each-pass loop use cpu_F0s?".
- */
- return op >= NEON_2RM_VCVT_FS;
-}
-
static bool neon_2rm_is_v8_op(int op)
{
/* Return true if this neon 2reg-misc op is ARMv8 and up */
@@ -6599,13 +6556,7 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
default:
elementwise:
for (pass = 0; pass < (q ? 4 : 2); pass++) {
- if (neon_2rm_is_float_op(op)) {
- tcg_gen_ld_f32(cpu_F0s, cpu_env,
- neon_reg_offset(rm, pass));
- tmp = NULL;
- } else {
- tmp = neon_load_reg(rm, pass);
- }
+ tmp = neon_load_reg(rm, pass);
switch (op) {
case NEON_2RM_VREV32:
switch (size) {
@@ -6860,29 +6811,40 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
break;
}
case NEON_2RM_VCVT_FS: /* VCVT.F32.S32 */
- gen_vfp_sito(0, 1);
+ {
+ TCGv_ptr fpstatus = get_fpstatus_ptr(1);
+ gen_helper_vfp_sitos(tmp, tmp, fpstatus);
+ tcg_temp_free_ptr(fpstatus);
break;
+ }
case NEON_2RM_VCVT_FU: /* VCVT.F32.U32 */
- gen_vfp_uito(0, 1);
+ {
+ TCGv_ptr fpstatus = get_fpstatus_ptr(1);
+ gen_helper_vfp_uitos(tmp, tmp, fpstatus);
+ tcg_temp_free_ptr(fpstatus);
break;
+ }
case NEON_2RM_VCVT_SF: /* VCVT.S32.F32 */
- gen_vfp_tosiz(0, 1);
+ {
+ TCGv_ptr fpstatus = get_fpstatus_ptr(1);
+ gen_helper_vfp_tosizs(tmp, tmp, fpstatus);
+ tcg_temp_free_ptr(fpstatus);
break;
+ }
case NEON_2RM_VCVT_UF: /* VCVT.U32.F32 */
- gen_vfp_touiz(0, 1);
+ {
+ TCGv_ptr fpstatus = get_fpstatus_ptr(1);
+ gen_helper_vfp_touizs(tmp, tmp, fpstatus);
+ tcg_temp_free_ptr(fpstatus);
break;
+ }
default:
/* Reserved op values were caught by the
* neon_2rm_sizes[] check earlier.
*/
abort();
}
- if (neon_2rm_is_float_op(op)) {
- tcg_gen_st_f32(cpu_F0s, cpu_env,
- neon_reg_offset(rd, pass));
- } else {
- neon_store_reg(rd, pass, tmp);
- }
+ neon_store_reg(rd, pass, tmp);
}
break;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 19/24] target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 18/24] target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 20/24] target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32 Peter Maydell
` (5 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Stop using cpu_F0s in the Neon VCVT fixed-point operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-10-peter.maydell@linaro.org
---
target/arm/translate.c | 62 +++++++++++++++++++-----------------------
1 file changed, 28 insertions(+), 34 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 0fb94b777bf..d8b46130d42 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -80,6 +80,8 @@ static const char * const regnames[] =
/* Function prototypes for gen_ functions calling Neon helpers. */
typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32,
TCGv_i32, TCGv_i32);
+/* Function prototypes for gen_ functions for fix point conversions */
+typedef void VFPGenFixPointFn(TCGv_i32, TCGv_i32, TCGv_i32, TCGv_ptr);
/* initialize TCG globals. */
void arm_translate_init(void)
@@ -1374,27 +1376,6 @@ static TCGv_ptr get_fpstatus_ptr(int neon)
return statusptr;
}
-#define VFP_GEN_FIX(name, round) \
-static inline void gen_vfp_##name(int dp, int shift, int neon) \
-{ \
- TCGv_i32 tmp_shift = tcg_const_i32(shift); \
- TCGv_ptr statusptr = get_fpstatus_ptr(neon); \
- if (dp) { \
- gen_helper_vfp_##name##d##round(cpu_F0d, cpu_F0d, tmp_shift, \
- statusptr); \
- } else { \
- gen_helper_vfp_##name##s##round(cpu_F0s, cpu_F0s, tmp_shift, \
- statusptr); \
- } \
- tcg_temp_free_i32(tmp_shift); \
- tcg_temp_free_ptr(statusptr); \
-}
-VFP_GEN_FIX(tosl, _round_to_zero)
-VFP_GEN_FIX(toul, _round_to_zero)
-VFP_GEN_FIX(slto, )
-VFP_GEN_FIX(ulto, )
-#undef VFP_GEN_FIX
-
static inline long vfp_reg_offset(bool dp, unsigned reg)
{
if (dp) {
@@ -5721,28 +5702,41 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
}
} else if (op >= 14) {
/* VCVT fixed-point. */
+ TCGv_ptr fpst;
+ TCGv_i32 shiftv;
+ VFPGenFixPointFn *fn;
+
if (!(insn & (1 << 21)) || (q && ((rd | rm) & 1))) {
return 1;
}
+
+ if (!(op & 1)) {
+ if (u) {
+ fn = gen_helper_vfp_ultos;
+ } else {
+ fn = gen_helper_vfp_sltos;
+ }
+ } else {
+ if (u) {
+ fn = gen_helper_vfp_touls_round_to_zero;
+ } else {
+ fn = gen_helper_vfp_tosls_round_to_zero;
+ }
+ }
+
/* We have already masked out the must-be-1 top bit of imm6,
* hence this 32-shift where the ARM ARM has 64-imm6.
*/
shift = 32 - shift;
+ fpst = get_fpstatus_ptr(1);
+ shiftv = tcg_const_i32(shift);
for (pass = 0; pass < (q ? 4 : 2); pass++) {
- tcg_gen_ld_f32(cpu_F0s, cpu_env, neon_reg_offset(rm, pass));
- if (!(op & 1)) {
- if (u)
- gen_vfp_ulto(0, shift, 1);
- else
- gen_vfp_slto(0, shift, 1);
- } else {
- if (u)
- gen_vfp_toul(0, shift, 1);
- else
- gen_vfp_tosl(0, shift, 1);
- }
- tcg_gen_st_f32(cpu_F0s, cpu_env, neon_reg_offset(rd, pass));
+ TCGv_i32 tmpf = neon_load_reg(rm, pass);
+ fn(tmpf, tmpf, shiftv, fpst);
+ neon_store_reg(rd, pass, tmpf);
}
+ tcg_temp_free_ptr(fpst);
+ tcg_temp_free_i32(shiftv);
} else {
return 1;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 20/24] target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 19/24] target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 21/24] target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16 Peter Maydell
` (4 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Remove some old constructs from NEON_2RM_VCVT_F16_F32 code:
* don't use cpu_F0s
* don't use tcg_gen_ld_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-11-peter.maydell@linaro.org
---
target/arm/translate.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index d8b46130d42..2ba620ac1e1 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1542,7 +1542,6 @@ static TCGv_ptr vfp_reg_ptr(bool dp, int reg)
return ret;
}
-#define tcg_gen_ld_f32 tcg_gen_ld_i32
#define tcg_gen_st_f32 tcg_gen_st_i32
#define ARM_CP_RW_BIT (1 << 20)
@@ -6425,25 +6424,23 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
q || (rm & 1)) {
return 1;
}
- tmp = tcg_temp_new_i32();
- tmp2 = tcg_temp_new_i32();
fpst = get_fpstatus_ptr(true);
ahp = get_ahp_flag();
- tcg_gen_ld_f32(cpu_F0s, cpu_env, neon_reg_offset(rm, 0));
- gen_helper_vfp_fcvt_f32_to_f16(tmp, cpu_F0s, fpst, ahp);
- tcg_gen_ld_f32(cpu_F0s, cpu_env, neon_reg_offset(rm, 1));
- gen_helper_vfp_fcvt_f32_to_f16(tmp2, cpu_F0s, fpst, ahp);
+ tmp = neon_load_reg(rm, 0);
+ gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp);
+ tmp2 = neon_load_reg(rm, 1);
+ gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp);
tcg_gen_shli_i32(tmp2, tmp2, 16);
tcg_gen_or_i32(tmp2, tmp2, tmp);
- tcg_gen_ld_f32(cpu_F0s, cpu_env, neon_reg_offset(rm, 2));
- gen_helper_vfp_fcvt_f32_to_f16(tmp, cpu_F0s, fpst, ahp);
- tcg_gen_ld_f32(cpu_F0s, cpu_env, neon_reg_offset(rm, 3));
+ tcg_temp_free_i32(tmp);
+ tmp = neon_load_reg(rm, 2);
+ gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp);
+ tmp3 = neon_load_reg(rm, 3);
neon_store_reg(rd, 0, tmp2);
- tmp2 = tcg_temp_new_i32();
- gen_helper_vfp_fcvt_f32_to_f16(tmp2, cpu_F0s, fpst, ahp);
- tcg_gen_shli_i32(tmp2, tmp2, 16);
- tcg_gen_or_i32(tmp2, tmp2, tmp);
- neon_store_reg(rd, 1, tmp2);
+ gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp);
+ tcg_gen_shli_i32(tmp3, tmp3, 16);
+ tcg_gen_or_i32(tmp3, tmp3, tmp);
+ neon_store_reg(rd, 1, tmp3);
tcg_temp_free_i32(tmp);
tcg_temp_free_i32(ahp);
tcg_temp_free_ptr(fpst);
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 21/24] target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 20/24] target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32 Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 22/24] target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d Peter Maydell
` (3 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-12-peter.maydell@linaro.org
---
target/arm/translate.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 2ba620ac1e1..8f124a953b6 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1542,8 +1542,6 @@ static TCGv_ptr vfp_reg_ptr(bool dp, int reg)
return ret;
}
-#define tcg_gen_st_f32 tcg_gen_st_i32
-
#define ARM_CP_RW_BIT (1 << 20)
/* Include the VFP decoder */
@@ -6460,20 +6458,18 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
tmp = neon_load_reg(rm, 0);
tmp2 = neon_load_reg(rm, 1);
tcg_gen_ext16u_i32(tmp3, tmp);
- gen_helper_vfp_fcvt_f16_to_f32(cpu_F0s, tmp3, fpst, ahp);
- tcg_gen_st_f32(cpu_F0s, cpu_env, neon_reg_offset(rd, 0));
- tcg_gen_shri_i32(tmp3, tmp, 16);
- gen_helper_vfp_fcvt_f16_to_f32(cpu_F0s, tmp3, fpst, ahp);
- tcg_gen_st_f32(cpu_F0s, cpu_env, neon_reg_offset(rd, 1));
- tcg_temp_free_i32(tmp);
+ gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp);
+ neon_store_reg(rd, 0, tmp3);
+ tcg_gen_shri_i32(tmp, tmp, 16);
+ gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp);
+ neon_store_reg(rd, 1, tmp);
+ tmp3 = tcg_temp_new_i32();
tcg_gen_ext16u_i32(tmp3, tmp2);
- gen_helper_vfp_fcvt_f16_to_f32(cpu_F0s, tmp3, fpst, ahp);
- tcg_gen_st_f32(cpu_F0s, cpu_env, neon_reg_offset(rd, 2));
- tcg_gen_shri_i32(tmp3, tmp2, 16);
- gen_helper_vfp_fcvt_f16_to_f32(cpu_F0s, tmp3, fpst, ahp);
- tcg_gen_st_f32(cpu_F0s, cpu_env, neon_reg_offset(rd, 3));
- tcg_temp_free_i32(tmp2);
- tcg_temp_free_i32(tmp3);
+ gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp);
+ neon_store_reg(rd, 2, tmp3);
+ tcg_gen_shri_i32(tmp2, tmp2, 16);
+ gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp);
+ neon_store_reg(rd, 3, tmp2);
tcg_temp_free_i32(ahp);
tcg_temp_free_ptr(fpst);
break;
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 22/24] target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 21/24] target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16 Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 23/24] target/arm: Fix typos in trans function prototypes Peter Maydell
` (2 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-13-peter.maydell@linaro.org
---
target/arm/translate.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 8f124a953b6..4750b9fa1bb 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -67,10 +67,6 @@ TCGv_i32 cpu_CF, cpu_NF, cpu_VF, cpu_ZF;
TCGv_i64 cpu_exclusive_addr;
TCGv_i64 cpu_exclusive_val;
-/* FIXME: These should be removed. */
-static TCGv_i32 cpu_F0s, cpu_F1s;
-static TCGv_i64 cpu_F0d, cpu_F1d;
-
#include "exec/gen-icount.h"
static const char * const regnames[] =
@@ -11911,12 +11907,8 @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
dc->base.max_insns = MIN(dc->base.max_insns, bound);
}
- cpu_F0s = tcg_temp_new_i32();
- cpu_F1s = tcg_temp_new_i32();
- cpu_F0d = tcg_temp_new_i64();
- cpu_F1d = tcg_temp_new_i64();
- cpu_V0 = cpu_F0d;
- cpu_V1 = cpu_F1d;
+ cpu_V0 = tcg_temp_new_i64();
+ cpu_V1 = tcg_temp_new_i64();
/* FIXME: cpu_M0 can probably be the same as cpu_V0. */
cpu_M0 = tcg_temp_new_i64();
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 23/24] target/arm: Fix typos in trans function prototypes
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 22/24] target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 24/24] target/arm: Only implement doubles if the FPU supports them Peter Maydell
2019-06-17 15:41 ` [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190614104457.24703-2-peter.maydell@linaro.org
---
target/arm/translate-vfp.inc.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c
index 8b732761f26..390441a1104 100644
--- a/target/arm/translate-vfp.inc.c
+++ b/target/arm/translate-vfp.inc.c
@@ -868,7 +868,7 @@ static bool trans_VMOV_64_sp(DisasContext *s, arg_VMOV_64_sp *a)
return true;
}
-static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_sp *a)
+static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_dp *a)
{
TCGv_i32 tmp;
@@ -943,7 +943,7 @@ static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a)
return true;
}
-static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_sp *a)
+static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_dp *a)
{
uint32_t offset;
TCGv_i32 addr;
@@ -1533,7 +1533,7 @@ static void gen_VMLA_dp(TCGv_i64 vd, TCGv_i64 vn, TCGv_i64 vm, TCGv_ptr fpst)
tcg_temp_free_i64(tmp);
}
-static bool trans_VMLA_dp(DisasContext *s, arg_VMLA_sp *a)
+static bool trans_VMLA_dp(DisasContext *s, arg_VMLA_dp *a)
{
return do_vfp_3op_dp(s, gen_VMLA_dp, a->vd, a->vn, a->vm, true);
}
@@ -1571,7 +1571,7 @@ static void gen_VMLS_dp(TCGv_i64 vd, TCGv_i64 vn, TCGv_i64 vm, TCGv_ptr fpst)
tcg_temp_free_i64(tmp);
}
-static bool trans_VMLS_dp(DisasContext *s, arg_VMLS_sp *a)
+static bool trans_VMLS_dp(DisasContext *s, arg_VMLS_dp *a)
{
return do_vfp_3op_dp(s, gen_VMLS_dp, a->vd, a->vn, a->vm, true);
}
@@ -1613,7 +1613,7 @@ static void gen_VNMLS_dp(TCGv_i64 vd, TCGv_i64 vn, TCGv_i64 vm, TCGv_ptr fpst)
tcg_temp_free_i64(tmp);
}
-static bool trans_VNMLS_dp(DisasContext *s, arg_VNMLS_sp *a)
+static bool trans_VNMLS_dp(DisasContext *s, arg_VNMLS_dp *a)
{
return do_vfp_3op_dp(s, gen_VNMLS_dp, a->vd, a->vn, a->vm, true);
}
@@ -1647,7 +1647,7 @@ static void gen_VNMLA_dp(TCGv_i64 vd, TCGv_i64 vn, TCGv_i64 vm, TCGv_ptr fpst)
tcg_temp_free_i64(tmp);
}
-static bool trans_VNMLA_dp(DisasContext *s, arg_VNMLA_sp *a)
+static bool trans_VNMLA_dp(DisasContext *s, arg_VNMLA_dp *a)
{
return do_vfp_3op_dp(s, gen_VNMLA_dp, a->vd, a->vn, a->vm, true);
}
@@ -1657,7 +1657,7 @@ static bool trans_VMUL_sp(DisasContext *s, arg_VMUL_sp *a)
return do_vfp_3op_sp(s, gen_helper_vfp_muls, a->vd, a->vn, a->vm, false);
}
-static bool trans_VMUL_dp(DisasContext *s, arg_VMUL_sp *a)
+static bool trans_VMUL_dp(DisasContext *s, arg_VMUL_dp *a)
{
return do_vfp_3op_dp(s, gen_helper_vfp_muld, a->vd, a->vn, a->vm, false);
}
@@ -1681,7 +1681,7 @@ static void gen_VNMUL_dp(TCGv_i64 vd, TCGv_i64 vn, TCGv_i64 vm, TCGv_ptr fpst)
gen_helper_vfp_negd(vd, vd);
}
-static bool trans_VNMUL_dp(DisasContext *s, arg_VNMUL_sp *a)
+static bool trans_VNMUL_dp(DisasContext *s, arg_VNMUL_dp *a)
{
return do_vfp_3op_dp(s, gen_VNMUL_dp, a->vd, a->vn, a->vm, false);
}
@@ -1691,7 +1691,7 @@ static bool trans_VADD_sp(DisasContext *s, arg_VADD_sp *a)
return do_vfp_3op_sp(s, gen_helper_vfp_adds, a->vd, a->vn, a->vm, false);
}
-static bool trans_VADD_dp(DisasContext *s, arg_VADD_sp *a)
+static bool trans_VADD_dp(DisasContext *s, arg_VADD_dp *a)
{
return do_vfp_3op_dp(s, gen_helper_vfp_addd, a->vd, a->vn, a->vm, false);
}
@@ -1701,7 +1701,7 @@ static bool trans_VSUB_sp(DisasContext *s, arg_VSUB_sp *a)
return do_vfp_3op_sp(s, gen_helper_vfp_subs, a->vd, a->vn, a->vm, false);
}
-static bool trans_VSUB_dp(DisasContext *s, arg_VSUB_sp *a)
+static bool trans_VSUB_dp(DisasContext *s, arg_VSUB_dp *a)
{
return do_vfp_3op_dp(s, gen_helper_vfp_subd, a->vd, a->vn, a->vm, false);
}
@@ -1711,7 +1711,7 @@ static bool trans_VDIV_sp(DisasContext *s, arg_VDIV_sp *a)
return do_vfp_3op_sp(s, gen_helper_vfp_divs, a->vd, a->vn, a->vm, false);
}
-static bool trans_VDIV_dp(DisasContext *s, arg_VDIV_sp *a)
+static bool trans_VDIV_dp(DisasContext *s, arg_VDIV_dp *a)
{
return do_vfp_3op_dp(s, gen_helper_vfp_divd, a->vd, a->vn, a->vm, false);
}
@@ -1774,7 +1774,7 @@ static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a)
return true;
}
-static bool trans_VFM_dp(DisasContext *s, arg_VFM_sp *a)
+static bool trans_VFM_dp(DisasContext *s, arg_VFM_dp *a)
{
/*
* VFNMA : fd = muladd(-fd, fn, fm)
@@ -2214,7 +2214,7 @@ static bool trans_VRINTR_sp(DisasContext *s, arg_VRINTR_sp *a)
return true;
}
-static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_sp *a)
+static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a)
{
TCGv_ptr fpst;
TCGv_i64 tmp;
@@ -2270,7 +2270,7 @@ static bool trans_VRINTZ_sp(DisasContext *s, arg_VRINTZ_sp *a)
return true;
}
-static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_sp *a)
+static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a)
{
TCGv_ptr fpst;
TCGv_i64 tmp;
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 24/24] target/arm: Only implement doubles if the FPU supports them
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 23/24] target/arm: Fix typos in trans function prototypes Peter Maydell
@ 2019-06-17 14:34 ` Peter Maydell
2019-06-17 15:41 ` [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 14:34 UTC (permalink / raw)
To: qemu-devel
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190614104457.24703-3-peter.maydell@linaro.org
---
target/arm/cpu.h | 6 +++
target/arm/translate-vfp.inc.c | 84 ++++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a98c45b1ff0..f9da672be57 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -3388,6 +3388,12 @@ static inline bool isar_feature_aa32_fpshvec(const ARMISARegisters *id)
return FIELD_EX64(id->mvfr0, MVFR0, FPSHVEC) > 0;
}
+static inline bool isar_feature_aa32_fpdp(const ARMISARegisters *id)
+{
+ /* Return true if CPU supports double precision floating point */
+ return FIELD_EX64(id->mvfr0, MVFR0, FPDP) > 0;
+}
+
/*
* We always set the FP and SIMD FP16 fields to indicate identical
* levels of support (assuming SIMD is implemented at all), so
diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c
index 390441a1104..348173d6026 100644
--- a/target/arm/translate-vfp.inc.c
+++ b/target/arm/translate-vfp.inc.c
@@ -206,6 +206,11 @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a)
((a->vm | a->vn | a->vd) & 0x10)) {
return false;
}
+
+ if (dp && !dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
rd = a->vd;
rn = a->vn;
rm = a->vm;
@@ -334,6 +339,11 @@ static bool trans_VMINMAXNM(DisasContext *s, arg_VMINMAXNM *a)
((a->vm | a->vn | a->vd) & 0x10)) {
return false;
}
+
+ if (dp && !dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
rd = a->vd;
rn = a->vn;
rm = a->vm;
@@ -415,6 +425,11 @@ static bool trans_VRINT(DisasContext *s, arg_VRINT *a)
((a->vm | a->vd) & 0x10)) {
return false;
}
+
+ if (dp && !dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
rd = a->vd;
rm = a->vm;
@@ -473,6 +488,11 @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a)
if (dp && !dc_isar_feature(aa32_fp_d32, s) && (a->vm & 0x10)) {
return false;
}
+
+ if (dp && !dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
rd = a->vd;
rm = a->vm;
@@ -1301,6 +1321,10 @@ static bool do_vfp_3op_dp(DisasContext *s, VFPGen3OpDPFn *fn,
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!dc_isar_feature(aa32_fpshvec, s) &&
(veclen != 0 || s->vec_stride != 0)) {
return false;
@@ -1446,6 +1470,10 @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!dc_isar_feature(aa32_fpshvec, s) &&
(veclen != 0 || s->vec_stride != 0)) {
return false;
@@ -1743,6 +1771,10 @@ static bool trans_VFM_sp(DisasContext *s, arg_VFM_sp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -1901,6 +1933,10 @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!dc_isar_feature(aa32_fpshvec, s) &&
(veclen != 0 || s->vec_stride != 0)) {
return false;
@@ -2041,6 +2077,10 @@ static bool trans_VCMP_dp(DisasContext *s, arg_VCMP_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2110,6 +2150,10 @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2172,6 +2216,10 @@ static bool trans_VCVT_f16_f64(DisasContext *s, arg_VCVT_f16_f64 *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2228,6 +2276,10 @@ static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2285,6 +2337,10 @@ static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2340,6 +2396,10 @@ static bool trans_VRINTX_dp(DisasContext *s, arg_VRINTX_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2364,6 +2424,10 @@ static bool trans_VCVT_sp(DisasContext *s, arg_VCVT_sp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2388,6 +2452,10 @@ static bool trans_VCVT_dp(DisasContext *s, arg_VCVT_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2438,6 +2506,10 @@ static bool trans_VCVT_int_dp(DisasContext *s, arg_VCVT_int_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2474,6 +2546,10 @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2563,6 +2639,10 @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
@@ -2655,6 +2735,10 @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a)
return false;
}
+ if (!dc_isar_feature(aa32_fpdp, s)) {
+ return false;
+ }
+
if (!vfp_access_check(s)) {
return true;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2019-06-17 14:34 ` [Qemu-devel] [PULL 24/24] target/arm: Only implement doubles if the FPU supports them Peter Maydell
@ 2019-06-17 15:41 ` Peter Maydell
24 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2019-06-17 15:41 UTC (permalink / raw)
To: QEMU Developers
On Mon, 17 Jun 2019 at 15:34, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Latest arm queue, half minor code cleanups and half minor
> bug fixes.
>
> -- PMM
>
> The following changes since commit 5d0e5694470d2952b4f257bc985cac8c89b4fd92:
>
> Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2019-06-17 11:55:14 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190617
>
> for you to fetch changes up to 1120827fa182f0e76226df7ffe7a86598d1df54f:
>
> target/arm: Only implement doubles if the FPU supports them (2019-06-17 15:15:06 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * support large kernel images in bootloader (by avoiding
> putting the initrd over the top of them)
> * correctly disable FPU/DSP in the CPU for the mps2-an521, musca-a boards
> * arm_gicv3: Fix decoding of ID register range
> * arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
> * some code cleanups following on from the VFP decodetree conversion
> * Only implement doubles if the FPU supports them
> (so we now correctly model Cortex-M4, -M33 as single precision only)
>
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2018-05-04 17:55 Peter Maydell
@ 2018-05-08 9:50 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2018-05-08 9:50 UTC (permalink / raw)
To: QEMU Developers
On 4 May 2018 at 18:55, Peter Maydell <peter.maydell@linaro.org> wrote:
> v2: fixed format string errors in trace messages.
>
> -- PMM
>
> The following changes since commit c8b7e627b4269a3bc3ae41d9f420547a47e6d9b9:
>
> Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-05-04' into staging (2018-05-04 14:42:46 +0100)
>
> are available in the Git repository at:
>
> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180504-1
>
> for you to fetch changes up to e24e3454829579eb815ec95d7b3679b0f65845b4:
>
> hw/arm/virt: Introduce the iommu option (2018-05-04 18:52:58 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
> if the commandline includes "-machine iommu=smmuv3"
> * target/arm: Implement v8M VLLDM and VLSTM
> * hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
> * Some fixes to silence Coverity false-positives
> * arm: boot: set boot_info starting from first_cpu
> (fixes a technical bug not visible in practice)
> * hw/net/smc91c111: Convert away from old_mmio
> * hw/usb/tusb6010: Convert away from old_mmio
> * hw/char/cmsdk-apb-uart.c: Accept more input after character read
> * target/arm: Make MPUIR write-ignored on OMAP, StrongARM
> * hw/arm/virt: Add linux,pci-domain property
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2018-05-04 17:58 ` Peter Maydell
@ 2018-05-06 16:00 ` Auger Eric
0 siblings, 0 replies; 37+ messages in thread
From: Auger Eric @ 2018-05-06 16:00 UTC (permalink / raw)
To: Peter Maydell, QEMU Developers
Hi Peter,
On 05/04/2018 07:58 PM, Peter Maydell wrote:
> On 4 May 2018 at 18:15, Peter Maydell <peter.maydell@linaro.org> wrote:
>> target-arm queue: Eric's SMMUv3 patchset, and an array
>> of minor bugfixes and improvements from various others.
>>
>> thanks
>> -- PMM
>>
>> The following changes since commit c8b7e627b4269a3bc3ae41d9f420547a47e6d9b9:
>>
>> Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-05-04' into staging (2018-05-04 14:42:46 +0100)
>>
>> are available in the Git repository at:
>>
>> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180504
>>
>> for you to fetch changes up to 5680740c92993e9b3f3e011f2a2c394070e33f56:
>>
>> hw/arm/virt: Introduce the iommu option (2018-05-04 18:05:52 +0100)
>>
>> ----------------------------------------------------------------
>> target-arm queue:
>> * Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
>> if the commandline includes "-machine iommu=smmuv3"
>> * target/arm: Implement v8M VLLDM and VLSTM
>> * hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
>> * Some fixes to silence Coverity false-positives
>> * arm: boot: set boot_info starting from first_cpu
>> (fixes a technical bug not visible in practice)
>> * hw/net/smc91c111: Convert away from old_mmio
>> * hw/usb/tusb6010: Convert away from old_mmio
>> * hw/char/cmsdk-apb-uart.c: Accept more input after character read
>> * target/arm: Make MPUIR write-ignored on OMAP, StrongARM
>> * hw/arm/virt: Add linux,pci-domain property
>
> Oops, 32-bit compile failures for format string issues;
>
> hw/arm/trace.h: In function ‘_nocheck__trace_smmu_ptw_level’:
> hw/arm/trace.h:215:18: error: format ‘%lx’ expects argument of type
> ‘long unsigned int’, but argument 7 has type ‘size_t {aka unsigned
> int}’ [-Werror=format=]
> qemu_log("%d@%zd.%06zd:smmu_ptw_level " "level=%d
> iova=0x%"PRIx64" subpage_sz=0x%lx baseaddr=0x%"PRIx64" offset=%d =>
> pte=0x%"PRIx64 "\n",
> ^
> hw/arm/trace.h: In function ‘_nocheck__trace_smmuv3_write_mmio_idr’:
> hw/arm/trace.h:606:18: error: format ‘%lx’ expects argument of type
> ‘long unsigned int’, but argument 5 has type ‘uint64_t {aka long long
> unsigned int}’ [-Werror=format=]
> qemu_log("%d@%zd.%06zd:smmuv3_write_mmio_idr " "write to
> RO/Unimpl reg 0x%lx val64:0x%lx" "\n",
> ^
> hw/arm/trace.h:606:18: error: format ‘%lx’ expects argument of type
> ‘long unsigned int’, but argument 6 has type ‘uint64_t {aka long long
> unsigned int}’ [-Werror=format=]
> hw/arm/trace.h: In function ‘_nocheck__trace_smmuv3_find_ste_2lvl’:
> hw/arm/trace.h:721:18: error: format ‘%lx’ expects argument of type
> ‘long unsigned int’, but argument 5 has type ‘uint64_t {aka long long
> unsigned int}’ [-Werror=format=]
> qemu_log("%d@%zd.%06zd:smmuv3_find_ste_2lvl "
> "strtab_base:0x%lx l1ptr:0x%"PRIx64" l1_off:0x%x, l2ptr:0x%"PRIx64"
> l2_off:0x%x max_l2_ste:%d" "\n",
> ^
>
> size_t arguments need %zx, not %lx, and uint64_t arguments need
> %"PRIx64", not %lx. I'll squash in the changes to the relevant patches.
OK. Thank you for taking this in charge!
Eric
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2018-05-04 17:15 Peter Maydell
@ 2018-05-04 17:58 ` Peter Maydell
2018-05-06 16:00 ` Auger Eric
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2018-05-04 17:58 UTC (permalink / raw)
To: QEMU Developers, Eric Auger
On 4 May 2018 at 18:15, Peter Maydell <peter.maydell@linaro.org> wrote:
> target-arm queue: Eric's SMMUv3 patchset, and an array
> of minor bugfixes and improvements from various others.
>
> thanks
> -- PMM
>
> The following changes since commit c8b7e627b4269a3bc3ae41d9f420547a47e6d9b9:
>
> Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-05-04' into staging (2018-05-04 14:42:46 +0100)
>
> are available in the Git repository at:
>
> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180504
>
> for you to fetch changes up to 5680740c92993e9b3f3e011f2a2c394070e33f56:
>
> hw/arm/virt: Introduce the iommu option (2018-05-04 18:05:52 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
> if the commandline includes "-machine iommu=smmuv3"
> * target/arm: Implement v8M VLLDM and VLSTM
> * hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
> * Some fixes to silence Coverity false-positives
> * arm: boot: set boot_info starting from first_cpu
> (fixes a technical bug not visible in practice)
> * hw/net/smc91c111: Convert away from old_mmio
> * hw/usb/tusb6010: Convert away from old_mmio
> * hw/char/cmsdk-apb-uart.c: Accept more input after character read
> * target/arm: Make MPUIR write-ignored on OMAP, StrongARM
> * hw/arm/virt: Add linux,pci-domain property
Oops, 32-bit compile failures for format string issues;
hw/arm/trace.h: In function ‘_nocheck__trace_smmu_ptw_level’:
hw/arm/trace.h:215:18: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 7 has type ‘size_t {aka unsigned
int}’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:smmu_ptw_level " "level=%d
iova=0x%"PRIx64" subpage_sz=0x%lx baseaddr=0x%"PRIx64" offset=%d =>
pte=0x%"PRIx64 "\n",
^
hw/arm/trace.h: In function ‘_nocheck__trace_smmuv3_write_mmio_idr’:
hw/arm/trace.h:606:18: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 5 has type ‘uint64_t {aka long long
unsigned int}’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:smmuv3_write_mmio_idr " "write to
RO/Unimpl reg 0x%lx val64:0x%lx" "\n",
^
hw/arm/trace.h:606:18: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 6 has type ‘uint64_t {aka long long
unsigned int}’ [-Werror=format=]
hw/arm/trace.h: In function ‘_nocheck__trace_smmuv3_find_ste_2lvl’:
hw/arm/trace.h:721:18: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 5 has type ‘uint64_t {aka long long
unsigned int}’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:smmuv3_find_ste_2lvl "
"strtab_base:0x%lx l1ptr:0x%"PRIx64" l1_off:0x%x, l2ptr:0x%"PRIx64"
l2_off:0x%x max_l2_ste:%d" "\n",
^
size_t arguments need %zx, not %lx, and uint64_t arguments need
%"PRIx64", not %lx. I'll squash in the changes to the relevant patches.
thanks
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2018-05-04 17:55 Peter Maydell
2018-05-08 9:50 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2018-05-04 17:55 UTC (permalink / raw)
To: qemu-devel
v2: fixed format string errors in trace messages.
-- PMM
The following changes since commit c8b7e627b4269a3bc3ae41d9f420547a47e6d9b9:
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-05-04' into staging (2018-05-04 14:42:46 +0100)
are available in the Git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180504-1
for you to fetch changes up to e24e3454829579eb815ec95d7b3679b0f65845b4:
hw/arm/virt: Introduce the iommu option (2018-05-04 18:52:58 +0100)
----------------------------------------------------------------
target-arm queue:
* Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
if the commandline includes "-machine iommu=smmuv3"
* target/arm: Implement v8M VLLDM and VLSTM
* hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
* Some fixes to silence Coverity false-positives
* arm: boot: set boot_info starting from first_cpu
(fixes a technical bug not visible in practice)
* hw/net/smc91c111: Convert away from old_mmio
* hw/usb/tusb6010: Convert away from old_mmio
* hw/char/cmsdk-apb-uart.c: Accept more input after character read
* target/arm: Make MPUIR write-ignored on OMAP, StrongARM
* hw/arm/virt: Add linux,pci-domain property
----------------------------------------------------------------
Eric Auger (11):
hw/arm/smmu-common: smmu base device and datatypes
hw/arm/smmu-common: IOMMU memory region and address space setup
hw/arm/smmu-common: VMSAv8-64 page table walk
hw/arm/smmuv3: Wired IRQ and GERROR helpers
hw/arm/smmuv3: Queue helpers
hw/arm/smmuv3: Implement MMIO write operations
hw/arm/smmuv3: Event queue recording helper
hw/arm/smmuv3: Implement translate callback
hw/arm/smmuv3: Abort on vfio or vhost case
target/arm/kvm: Translate the MSI doorbell in kvm_arch_fixup_msi_route
hw/arm/virt: Introduce the iommu option
Igor Mammedov (1):
arm: boot: set boot_info starting from first_cpu
Jan Kiszka (1):
hw/arm/virt: Add linux,pci-domain property
Mathew Maidment (1):
target/arm: Correct MPUIR privilege level in register_cp_regs_for_features() conditional case
Patrick Oppenlander (1):
hw/char/cmsdk-apb-uart.c: Accept more input after character read
Peter Maydell (3):
hw/usb/tusb6010: Convert away from old_mmio
hw/net/smc91c111: Convert away from old_mmio
target/arm: Implement v8M VLLDM and VLSTM
Prem Mallappa (3):
hw/arm/smmuv3: Skeleton
hw/arm/virt: Add SMMUv3 to the virt board
hw/arm/virt-acpi-build: Add smmuv3 node in IORT table
Richard Henderson (2):
target/arm: Tidy conditions in handle_vec_simd_shri
target/arm: Tidy condition in disas_simd_two_reg_misc
Thomas Huth (1):
hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
hw/arm/Makefile.objs | 1 +
hw/arm/smmu-internal.h | 99 +++
hw/arm/smmuv3-internal.h | 621 ++++++++++++++++++
include/hw/acpi/acpi-defs.h | 15 +
include/hw/arm/smmu-common.h | 145 +++++
include/hw/arm/smmuv3.h | 87 +++
include/hw/arm/virt.h | 10 +
hw/arm/boot.c | 2 +-
hw/arm/omap1.c | 8 +-
hw/arm/omap2.c | 8 +-
hw/arm/pxa2xx.c | 15 +-
hw/arm/smmu-common.c | 372 +++++++++++
hw/arm/smmuv3.c | 1191 +++++++++++++++++++++++++++++++++++
hw/arm/virt-acpi-build.c | 55 +-
hw/arm/virt.c | 101 ++-
hw/char/cmsdk-apb-uart.c | 1 +
hw/net/smc91c111.c | 54 +-
hw/usb/tusb6010.c | 40 +-
target/arm/helper.c | 2 +-
target/arm/kvm.c | 38 +-
target/arm/translate-a64.c | 12 +-
target/arm/translate.c | 17 +-
default-configs/aarch64-softmmu.mak | 1 +
hw/arm/trace-events | 37 ++
target/arm/trace-events | 3 +
25 files changed, 2868 insertions(+), 67 deletions(-)
create mode 100644 hw/arm/smmu-internal.h
create mode 100644 hw/arm/smmuv3-internal.h
create mode 100644 include/hw/arm/smmu-common.h
create mode 100644 include/hw/arm/smmuv3.h
create mode 100644 hw/arm/smmu-common.c
create mode 100644 hw/arm/smmuv3.c
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2018-05-04 17:15 Peter Maydell
2018-05-04 17:58 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2018-05-04 17:15 UTC (permalink / raw)
To: qemu-devel
target-arm queue: Eric's SMMUv3 patchset, and an array
of minor bugfixes and improvements from various others.
thanks
-- PMM
The following changes since commit c8b7e627b4269a3bc3ae41d9f420547a47e6d9b9:
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-05-04' into staging (2018-05-04 14:42:46 +0100)
are available in the Git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180504
for you to fetch changes up to 5680740c92993e9b3f3e011f2a2c394070e33f56:
hw/arm/virt: Introduce the iommu option (2018-05-04 18:05:52 +0100)
----------------------------------------------------------------
target-arm queue:
* Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
if the commandline includes "-machine iommu=smmuv3"
* target/arm: Implement v8M VLLDM and VLSTM
* hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
* Some fixes to silence Coverity false-positives
* arm: boot: set boot_info starting from first_cpu
(fixes a technical bug not visible in practice)
* hw/net/smc91c111: Convert away from old_mmio
* hw/usb/tusb6010: Convert away from old_mmio
* hw/char/cmsdk-apb-uart.c: Accept more input after character read
* target/arm: Make MPUIR write-ignored on OMAP, StrongARM
* hw/arm/virt: Add linux,pci-domain property
----------------------------------------------------------------
Eric Auger (11):
hw/arm/smmu-common: smmu base device and datatypes
hw/arm/smmu-common: IOMMU memory region and address space setup
hw/arm/smmu-common: VMSAv8-64 page table walk
hw/arm/smmuv3: Wired IRQ and GERROR helpers
hw/arm/smmuv3: Queue helpers
hw/arm/smmuv3: Implement MMIO write operations
hw/arm/smmuv3: Event queue recording helper
hw/arm/smmuv3: Implement translate callback
hw/arm/smmuv3: Abort on vfio or vhost case
target/arm/kvm: Translate the MSI doorbell in kvm_arch_fixup_msi_route
hw/arm/virt: Introduce the iommu option
Igor Mammedov (1):
arm: boot: set boot_info starting from first_cpu
Jan Kiszka (1):
hw/arm/virt: Add linux,pci-domain property
Mathew Maidment (1):
target/arm: Correct MPUIR privilege level in register_cp_regs_for_features() conditional case
Patrick Oppenlander (1):
hw/char/cmsdk-apb-uart.c: Accept more input after character read
Peter Maydell (3):
hw/usb/tusb6010: Convert away from old_mmio
hw/net/smc91c111: Convert away from old_mmio
target/arm: Implement v8M VLLDM and VLSTM
Prem Mallappa (3):
hw/arm/smmuv3: Skeleton
hw/arm/virt: Add SMMUv3 to the virt board
hw/arm/virt-acpi-build: Add smmuv3 node in IORT table
Richard Henderson (2):
target/arm: Tidy conditions in handle_vec_simd_shri
target/arm: Tidy condition in disas_simd_two_reg_misc
Thomas Huth (1):
hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
hw/arm/Makefile.objs | 1 +
hw/arm/smmu-internal.h | 99 +++
hw/arm/smmuv3-internal.h | 621 ++++++++++++++++++
include/hw/acpi/acpi-defs.h | 15 +
include/hw/arm/smmu-common.h | 145 +++++
include/hw/arm/smmuv3.h | 87 +++
include/hw/arm/virt.h | 10 +
hw/arm/boot.c | 2 +-
hw/arm/omap1.c | 8 +-
hw/arm/omap2.c | 8 +-
hw/arm/pxa2xx.c | 15 +-
hw/arm/smmu-common.c | 372 +++++++++++
hw/arm/smmuv3.c | 1191 +++++++++++++++++++++++++++++++++++
hw/arm/virt-acpi-build.c | 55 +-
hw/arm/virt.c | 101 ++-
hw/char/cmsdk-apb-uart.c | 1 +
hw/net/smc91c111.c | 54 +-
hw/usb/tusb6010.c | 40 +-
target/arm/helper.c | 2 +-
target/arm/kvm.c | 38 +-
target/arm/translate-a64.c | 12 +-
target/arm/translate.c | 17 +-
default-configs/aarch64-softmmu.mak | 1 +
hw/arm/trace-events | 37 ++
target/arm/trace-events | 3 +
25 files changed, 2868 insertions(+), 67 deletions(-)
create mode 100644 hw/arm/smmu-internal.h
create mode 100644 hw/arm/smmuv3-internal.h
create mode 100644 include/hw/arm/smmu-common.h
create mode 100644 include/hw/arm/smmuv3.h
create mode 100644 hw/arm/smmu-common.c
create mode 100644 hw/arm/smmuv3.c
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2018-01-16 13:33 Peter Maydell
@ 2018-01-16 15:44 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2018-01-16 15:44 UTC (permalink / raw)
To: QEMU Developers
On 16 January 2018 at 13:33, Peter Maydell <peter.maydell@linaro.org> wrote:
> More arm patches (mostly the SDHCI ones from Philippe)
>
> thanks
> -- PMM
>
> The following changes since commit f521eeee3bd060b460c99e605472b7e03967db43:
>
> Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180115' into staging (2018-01-15 13:17:47 +0000)
>
> are available in the git repository at:
>
> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180116
>
> for you to fetch changes up to 60765b6ceeb4998a0d4220b3a53f1f185061da77:
>
> sdhci: add a 'dma' property to the sysbus devices (2018-01-16 13:28:21 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * SDHCI: cleanups and minor bug fixes
> * target/arm: minor refactor preparatory to fp16 support
> * omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
> card on controller reset (fixes migration failures)
> * target/arm: Handle page table walk load failures correctly
> * hw/arm/virt: Add virt-2.12 machine type
> * get_phys_addr_pmsav7: Support AP=0b111 for v7M
> * hw/intc/armv7m: Support byte and halfword accesses to CFSR
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2018-01-16 13:33 Peter Maydell
2018-01-16 15:44 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2018-01-16 13:33 UTC (permalink / raw)
To: qemu-devel
More arm patches (mostly the SDHCI ones from Philippe)
thanks
-- PMM
The following changes since commit f521eeee3bd060b460c99e605472b7e03967db43:
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180115' into staging (2018-01-15 13:17:47 +0000)
are available in the git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180116
for you to fetch changes up to 60765b6ceeb4998a0d4220b3a53f1f185061da77:
sdhci: add a 'dma' property to the sysbus devices (2018-01-16 13:28:21 +0000)
----------------------------------------------------------------
target-arm queue:
* SDHCI: cleanups and minor bug fixes
* target/arm: minor refactor preparatory to fp16 support
* omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
card on controller reset (fixes migration failures)
* target/arm: Handle page table walk load failures correctly
* hw/arm/virt: Add virt-2.12 machine type
* get_phys_addr_pmsav7: Support AP=0b111 for v7M
* hw/intc/armv7m: Support byte and halfword accesses to CFSR
----------------------------------------------------------------
Andrey Smirnov (1):
sdhci: Implement write method of ACMD12ERRSTS register
Peter Maydell (8):
hw/intc/armv7m: Support byte and halfword accesses to CFSR
get_phys_addr_pmsav7: Support AP=0b111 for v7M
hw/arm/virt: Add virt-2.12 machine type
target/arm: Handle page table walk load failures correctly
hw/sd/pl181: Reset SD card on controller reset
hw/sd/milkymist-memcard: Reset SD card on controller reset
hw/sd/ssi-sd: Reset SD card on controller reset
hw/sd/omap_mmc: Reset SD card on controller reset
Philippe Mathieu-Daudé (13):
sdhci: clean up includes
sdhci: remove dead code
sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci properties
sdhci: refactor common sysbus/pci class_init() into sdhci_common_class_init()
sdhci: refactor common sysbus/pci realize() into sdhci_common_realize()
sdhci: refactor common sysbus/pci unrealize() into sdhci_common_unrealize()
sdhci: use qemu_log_mask(UNIMP) instead of fprintf()
sdhci: convert the DPRINT() calls into trace events
sdhci: move MASK_TRNMOD with other SDHC_TRN* defines in "sd-internal.h"
sdhci: rename the SDHC_CAPAB register
sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only
sdhci: fix the PCI device, using the PCI address space for DMA
sdhci: add a 'dma' property to the sysbus devices
Richard Henderson (2):
target/arm: Split out vfp_expand_imm
target/arm: Add fp16 support to vfp_expand_imm
hw/sd/sdhci-internal.h | 7 +-
include/hw/sd/sdhci.h | 19 +++-
target/arm/internals.h | 10 ++
hw/arm/virt.c | 19 +++-
hw/intc/armv7m_nvic.c | 38 ++++---
hw/sd/milkymist-memcard.c | 4 +
hw/sd/omap_mmc.c | 14 ++-
hw/sd/pl181.c | 4 +
hw/sd/sdhci.c | 266 +++++++++++++++++++++++++++------------------
hw/sd/ssi-sd.c | 25 ++++-
target/arm/helper.c | 53 ++++++++-
target/arm/op_helper.c | 7 +-
target/arm/translate-a64.c | 49 ++++++---
hw/sd/trace-events | 14 +++
14 files changed, 362 insertions(+), 167 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2017-04-20 16:40 Peter Maydell
@ 2017-04-20 17:30 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2017-04-20 17:30 UTC (permalink / raw)
To: QEMU Developers
On 20 April 2017 at 17:40, Peter Maydell <peter.maydell@linaro.org> wrote:
> First ARM pullreq of the 2.10 cycle...
>
> thanks
> -- PMM
>
> The following changes since commit 64c8ed97cceabac4fafe17fca8d88ef08183f439:
>
> Open 2.10 development tree (2017-04-20 15:42:31 +0100)
>
> are available in the git repository at:
>
> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170420
>
> for you to fetch changes up to f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa:
>
> arm: Remove workarounds for old M-profile exception return implementation (2017-04-20 17:39:17 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * implement M profile exception return properly
> * cadence GEM: fix multiqueue handling bugs
> * pxa2xx.c: QOMify a device
> * arm/kvm: Remove trailing newlines from error_report()
> * stellaris: Don't hw_error() on bad register accesses
> * Add assertion about FSC format for syndrome registers
> * Move excnames[] array into arm_log_exceptions()
> * exynos: minor code cleanups
> * hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
> * Fix APSR writes via M profile MSR
>
> ----------------------------------------------------------------
> Alistair Francis (5):
> cadence_gem: Read the correct queue descriptor
> cadence_gem: Correct the multi-queue can rx logic
> cadence_gem: Correct the interupt logic
> cadence_gem: Make the revision a property
> xlnx-zynqmp: Set the Cadence GEM revision
>
> Ard Biesheuvel (1):
> hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
>
> Ishani Chugh (1):
> arm/kvm: Remove trailing newlines from error_report()
>
> Krzysztof Kozlowski (3):
> hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report
> hw/char/exynos4210_uart: Constify static array and few arguments
> hw/misc/exynos4210_pmu: Reorder local variables for readability
>
> Peter Maydell (13):
> target/arm: Add missing entries to excnames[] for log strings
> arm: Move excnames[] array into arm_log_exceptions()
> target/arm: Add assertion about FSC format for syndrome registers
> stellaris: Don't hw_error() on bad register accesses
> arm: Don't implement BXJ on M-profile CPUs
> arm: Thumb shift operations should not permit interworking branches
> arm: Factor out "generate right kind of step exception"
> arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
> arm: Move condition-failed codepath generation out of if()
> arm: Abstract out "are we singlestepping" test to utility function
> arm: Track M profile handler mode state in TB flags
> arm: Implement M profile exception return properly
> arm: Remove workarounds for old M-profile exception return implementation
>
> Suramya Shah (1):
> hw/arm: Qomify pxa2xx.c
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2017-04-20 16:40 Peter Maydell
2017-04-20 17:30 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2017-04-20 16:40 UTC (permalink / raw)
To: qemu-devel
First ARM pullreq of the 2.10 cycle...
thanks
-- PMM
The following changes since commit 64c8ed97cceabac4fafe17fca8d88ef08183f439:
Open 2.10 development tree (2017-04-20 15:42:31 +0100)
are available in the git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170420
for you to fetch changes up to f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa:
arm: Remove workarounds for old M-profile exception return implementation (2017-04-20 17:39:17 +0100)
----------------------------------------------------------------
target-arm queue:
* implement M profile exception return properly
* cadence GEM: fix multiqueue handling bugs
* pxa2xx.c: QOMify a device
* arm/kvm: Remove trailing newlines from error_report()
* stellaris: Don't hw_error() on bad register accesses
* Add assertion about FSC format for syndrome registers
* Move excnames[] array into arm_log_exceptions()
* exynos: minor code cleanups
* hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
* Fix APSR writes via M profile MSR
----------------------------------------------------------------
Alistair Francis (5):
cadence_gem: Read the correct queue descriptor
cadence_gem: Correct the multi-queue can rx logic
cadence_gem: Correct the interupt logic
cadence_gem: Make the revision a property
xlnx-zynqmp: Set the Cadence GEM revision
Ard Biesheuvel (1):
hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
Ishani Chugh (1):
arm/kvm: Remove trailing newlines from error_report()
Krzysztof Kozlowski (3):
hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report
hw/char/exynos4210_uart: Constify static array and few arguments
hw/misc/exynos4210_pmu: Reorder local variables for readability
Peter Maydell (13):
target/arm: Add missing entries to excnames[] for log strings
arm: Move excnames[] array into arm_log_exceptions()
target/arm: Add assertion about FSC format for syndrome registers
stellaris: Don't hw_error() on bad register accesses
arm: Don't implement BXJ on M-profile CPUs
arm: Thumb shift operations should not permit interworking branches
arm: Factor out "generate right kind of step exception"
arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
arm: Move condition-failed codepath generation out of if()
arm: Abstract out "are we singlestepping" test to utility function
arm: Track M profile handler mode state in TB flags
arm: Implement M profile exception return properly
arm: Remove workarounds for old M-profile exception return implementation
Suramya Shah (1):
hw/arm: Qomify pxa2xx.c
include/hw/net/cadence_gem.h | 1 +
target/arm/cpu.h | 10 +++
target/arm/internals.h | 21 -----
target/arm/translate.h | 5 ++
hw/arm/boot.c | 64 ++++++++++++---
hw/arm/exynos4_boards.c | 7 +-
hw/arm/pxa2xx.c | 14 ++--
hw/arm/stellaris.c | 60 ++++++++------
hw/arm/xlnx-zynqmp.c | 6 +-
hw/char/exynos4210_uart.c | 8 +-
hw/misc/exynos4210_pmu.c | 4 +-
hw/net/cadence_gem.c | 45 +++++++----
hw/timer/exynos4210_mct.c | 6 +-
hw/timer/exynos4210_pwm.c | 13 ++--
hw/timer/exynos4210_rtc.c | 19 ++---
target/arm/cpu.c | 43 +---------
target/arm/helper.c | 19 +++++
target/arm/kvm64.c | 4 +-
target/arm/op_helper.c | 23 ++++--
target/arm/translate.c | 181 +++++++++++++++++++++++++++++--------------
20 files changed, 341 insertions(+), 212 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Qemu-devel] [PULL 00/24] target-arm queue
2015-09-14 13:52 Peter Maydell
@ 2015-09-14 15:12 ` Peter Maydell
0 siblings, 0 replies; 37+ messages in thread
From: Peter Maydell @ 2015-09-14 15:12 UTC (permalink / raw)
To: QEMU Developers
On 14 September 2015 at 14:52, Peter Maydell <peter.maydell@linaro.org> wrote:
> More target-arm patches from various people.
>
> -- PMM
>
> The following changes since commit 2b750d9d261bda7f75b39dfc1e1e5f22502929d5:
>
> Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-20150913' into staging (2015-09-14 10:46:38 +0100)
>
> are available in the git repository at:
>
>
> git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150914
>
> for you to fetch changes up to f0d574d63f4603ec431f16ad535a555bf7548b94:
>
> target-arm: Add VMPIDR_EL2 (2015-09-14 14:39:51 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * fix GIC region size in xlnx-zynqmp
> * xlnx-zynqmp: Remove unnecessary brackets
> * improve A64 generated TCG code
> * add GPIO devices to i.MX25 and i.MX31
> * more missing pieces for EL2 support
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* [Qemu-devel] [PULL 00/24] target-arm queue
@ 2015-09-14 13:52 Peter Maydell
2015-09-14 15:12 ` Peter Maydell
0 siblings, 1 reply; 37+ messages in thread
From: Peter Maydell @ 2015-09-14 13:52 UTC (permalink / raw)
To: qemu-devel
More target-arm patches from various people.
-- PMM
The following changes since commit 2b750d9d261bda7f75b39dfc1e1e5f22502929d5:
Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-20150913' into staging (2015-09-14 10:46:38 +0100)
are available in the git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150914
for you to fetch changes up to f0d574d63f4603ec431f16ad535a555bf7548b94:
target-arm: Add VMPIDR_EL2 (2015-09-14 14:39:51 +0100)
----------------------------------------------------------------
target-arm queue:
* fix GIC region size in xlnx-zynqmp
* xlnx-zynqmp: Remove unnecessary brackets
* improve A64 generated TCG code
* add GPIO devices to i.MX25 and i.MX31
* more missing pieces for EL2 support
----------------------------------------------------------------
Alistair Francis (1):
xlnx-zynqmp: Remove unnecessary brackets around error messages
Edgar E. Iglesias (8):
hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully
target-arm: Add VTCR_EL2
target-arm: Add VTTBR_EL2
target-arm: Suppress TBI for S2 translations
target-arm: Suppress EPD for S2, EL2 and EL3 translations
target-arm: Add VPIDR_EL2
target-arm: Break out mpidr_read_val()
target-arm: Add VMPIDR_EL2
Jean-Christophe Dubois (3):
i.MX: Add GPIO device
i.MX: Add GPIO devices to i.MX31 SOC
i.MX: Add GPIO devices to i.MX25 SOC
Nathan Rossi (1):
arm: xlnx-zynqmp: Fix up GIC region size
Richard Henderson (11):
target-arm: Share all common TCG temporaries
target-arm: Introduce DisasCompare
target-arm: Handle always condition codes within arm_test_cc
target-arm: Use setcond and movcond for csel
target-arm: Implement ccmp branchless
target-arm: Implement fcsel with movcond
target-arm: Recognize SXTB, SXTH, SXTW, ASR
target-arm: Recognize UXTB, UXTH, LSR, LSL
target-arm: Eliminate unnecessary zero-extend in disas_bitfield
target-arm: Recognize ROR
target-arm: Use tcg_gen_extrh_i64_i32
hw/arm/fsl-imx25.c | 29 ++++
hw/arm/fsl-imx31.c | 30 ++++
hw/arm/xlnx-zynqmp.c | 10 +-
hw/cpu/a15mpcore.c | 2 +-
hw/cpu/a9mpcore.c | 2 +-
hw/gpio/Makefile.objs | 1 +
hw/gpio/imx_gpio.c | 340 +++++++++++++++++++++++++++++++++++++++++++
include/hw/arm/fsl-imx25.h | 15 ++
include/hw/arm/fsl-imx31.h | 12 ++
include/hw/arm/xlnx-zynqmp.h | 2 +-
include/hw/gpio/imx_gpio.h | 62 ++++++++
target-arm/cpu.h | 4 +
target-arm/helper.c | 158 ++++++++++++++++++--
target-arm/translate-a64.c | 340 +++++++++++++++++++++++++------------------
target-arm/translate.c | 134 ++++++++++-------
target-arm/translate.h | 17 +++
16 files changed, 949 insertions(+), 209 deletions(-)
create mode 100644 hw/gpio/imx_gpio.c
create mode 100644 include/hw/gpio/imx_gpio.h
^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2019-06-17 15:47 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17 14:33 [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 01/24] hw/arm/boot: Don't assume RAM starts at address zero Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 02/24] hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 03/24] hw/arm/boot: Avoid placing the initrd on top of the kernel Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 04/24] hw/arm/boot: Honour image size field in AArch64 Image format kernels Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 05/24] target/arm: Allow VFP and Neon to be disabled via a CPU property Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 06/24] target/arm: Allow M-profile CPUs to disable the DSP extension via " Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 07/24] hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 08/24] hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 09/24] hw/intc/arm_gicv3: Fix decoding of ID register range Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 10/24] hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1 Peter Maydell
2019-06-17 14:33 ` [Qemu-devel] [PULL 11/24] target/arm: Move vfp_expand_imm() to translate.[ch] Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 12/24] target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 13/24] target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 14/24] target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 15/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRINT* Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 16/24] target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US] Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 17/24] target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 18/24] target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 19/24] target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 20/24] target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32 Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 21/24] target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16 Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 22/24] target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 23/24] target/arm: Fix typos in trans function prototypes Peter Maydell
2019-06-17 14:34 ` [Qemu-devel] [PULL 24/24] target/arm: Only implement doubles if the FPU supports them Peter Maydell
2019-06-17 15:41 ` [Qemu-devel] [PULL 00/24] target-arm queue Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2018-05-04 17:55 Peter Maydell
2018-05-08 9:50 ` Peter Maydell
2018-05-04 17:15 Peter Maydell
2018-05-04 17:58 ` Peter Maydell
2018-05-06 16:00 ` Auger Eric
2018-01-16 13:33 Peter Maydell
2018-01-16 15:44 ` Peter Maydell
2017-04-20 16:40 Peter Maydell
2017-04-20 17:30 ` Peter Maydell
2015-09-14 13:52 Peter Maydell
2015-09-14 15:12 ` Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.