* [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards
@ 2017-10-26 18:11 Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 01/11] arm-trusted-firmware: Build FIP for BL33 Jagan Teki
` (10 more replies)
0 siblings, 11 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
This patchset series drop 'sunxi64-post-build.sh'[1] for post-building
U-Boot proper instead it add U-Boot-bundles-ATF scenario.
All boards now use Mainline U-Boot, Linux and Nanaopi A64, A64-olinuxino
used linux-next patches since 4.13.7 have not been merged.
Tested on rea hardware.
Changes for v3:
- Added "arm-trusted-firmware: Build FIP for BL33" patch
- Added "uboot: Add U-Boot-bundles-ATF support" patch
- Droped sunxi64-post-build.sh config and script file
Changes for v3:
- Fixed Bananapi M1 comment on config file
- Add sunxi64-post-build.sh
- Add all sunxi64 boards
Changes for v2:
- Rebase on master
[1] https://www.mail-archive.com/linux-sunxi at googlegroups.com/msg24703.html
Jagan Teki (11):
arm-trusted-firmware: Build FIP for BL33
uboot: Add U-Boot-bundles-ATF support
board: Add Bananapi M64 support
board: Add Pine64 support
board: Add SoPine support
board: Add FriendlyARM Nanopi A64 support
board: Add FriendlyARM Nanopi NEO2 support
board: Add Olimex A64-OLinuXino support
board: Add Orangepi Win/Win Plus support
board: Add Orangepi Prime support
board: Add Orangepi Zero Plus2 support
.gitlab-ci.yml | 9 +
DEVELOPERS | 16 ++
board/bananapi/bananapi-m64/boot.cmd | 6 +
board/bananapi/bananapi-m64/genimage.cfg | 38 +++
board/bananapi/bananapi-m64/readme.txt | 37 +++
board/friendlyarm/nanopi-a64/boot.cmd | 6 +
board/friendlyarm/nanopi-a64/genimage.cfg | 38 +++
board/friendlyarm/nanopi-a64/linux_axp.fragment | 3 +
...nner-a64-add-NMI-R_INTC-controller-on-A64.patch | 41 ++++
...lwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch | 176 ++++++++++++++
...winner-a64-Add-initial-NanoPi-A64-support.patch | 254 +++++++++++++++++++++
board/friendlyarm/nanopi-a64/readme.txt | 37 +++
board/friendlyarm/nanopi-neo2/boot.cmd | 6 +
board/friendlyarm/nanopi-neo2/genimage.cfg | 38 +++
board/friendlyarm/nanopi-neo2/readme.txt | 37 +++
board/olimex/a64-olinuxino/boot.cmd | 6 +
board/olimex/a64-olinuxino/genimage.cfg | 38 +++
board/olimex/a64-olinuxino/linux_axp.fragment | 3 +
...nner-a64-add-NMI-R_INTC-controller-on-A64.patch | 41 ++++
...lwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch | 176 ++++++++++++++
...nner-a64-Add-A64-OLinuXino-initial-suppor.patch | 244 ++++++++++++++++++++
board/olimex/a64-olinuxino/readme.txt | 37 +++
board/orangepi/orangepi-prime/boot.cmd | 6 +
board/orangepi/orangepi-prime/genimage.cfg | 38 +++
board/orangepi/orangepi-prime/readme.txt | 37 +++
board/orangepi/orangepi-win/boot.cmd | 6 +
board/orangepi/orangepi-win/genimage.cfg | 38 +++
board/orangepi/orangepi-win/readme.txt | 37 +++
board/orangepi/orangepi-zero-plus2/boot.cmd | 6 +
board/orangepi/orangepi-zero-plus2/genimage.cfg | 38 +++
board/orangepi/orangepi-zero-plus2/readme.txt | 37 +++
board/pine64/pine64/boot.cmd | 6 +
board/pine64/pine64/genimage.cfg | 38 +++
board/pine64/pine64/readme.txt | 38 +++
board/pine64/sopine/boot.cmd | 6 +
board/pine64/sopine/genimage.cfg | 38 +++
board/pine64/sopine/readme.txt | 38 +++
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 12 +-
boot/uboot/Config.in | 10 +
boot/uboot/uboot.mk | 5 +
configs/bananapi_m64_defconfig | 47 ++++
configs/friendlyarm_nanopi_a64_defconfig | 51 +++++
configs/friendlyarm_nanopi_neo2_defconfig | 47 ++++
configs/olimex_a64_olinuxino_defconfig | 51 +++++
configs/orangepi_prime_defconfig | 47 ++++
configs/orangepi_win_defconfig | 47 ++++
configs/orangepi_zero_plus2_defconfig | 47 ++++
configs/pine64_defconfig | 47 ++++
configs/pine64_sopine_defconfig | 47 ++++
49 files changed, 2149 insertions(+), 3 deletions(-)
create mode 100644 board/bananapi/bananapi-m64/boot.cmd
create mode 100644 board/bananapi/bananapi-m64/genimage.cfg
create mode 100644 board/bananapi/bananapi-m64/readme.txt
create mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
create mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
create mode 100644 board/friendlyarm/nanopi-a64/linux_axp.fragment
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0003-arm64-allwinner-a64-Add-initial-NanoPi-A64-support.patch
create mode 100644 board/friendlyarm/nanopi-a64/readme.txt
create mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
create mode 100644 board/olimex/a64-olinuxino/boot.cmd
create mode 100644 board/olimex/a64-olinuxino/genimage.cfg
create mode 100644 board/olimex/a64-olinuxino/linux_axp.fragment
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0003-arm64-allwinner-a64-Add-A64-OLinuXino-initial-suppor.patch
create mode 100644 board/olimex/a64-olinuxino/readme.txt
create mode 100644 board/orangepi/orangepi-prime/boot.cmd
create mode 100644 board/orangepi/orangepi-prime/genimage.cfg
create mode 100644 board/orangepi/orangepi-prime/readme.txt
create mode 100644 board/orangepi/orangepi-win/boot.cmd
create mode 100644 board/orangepi/orangepi-win/genimage.cfg
create mode 100644 board/orangepi/orangepi-win/readme.txt
create mode 100644 board/orangepi/orangepi-zero-plus2/boot.cmd
create mode 100644 board/orangepi/orangepi-zero-plus2/genimage.cfg
create mode 100644 board/orangepi/orangepi-zero-plus2/readme.txt
create mode 100644 board/pine64/pine64/boot.cmd
create mode 100644 board/pine64/pine64/genimage.cfg
create mode 100644 board/pine64/pine64/readme.txt
create mode 100644 board/pine64/sopine/boot.cmd
create mode 100644 board/pine64/sopine/genimage.cfg
create mode 100644 board/pine64/sopine/readme.txt
create mode 100644 configs/bananapi_m64_defconfig
create mode 100644 configs/friendlyarm_nanopi_a64_defconfig
create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
create mode 100644 configs/olimex_a64_olinuxino_defconfig
create mode 100644 configs/orangepi_prime_defconfig
create mode 100644 configs/orangepi_win_defconfig
create mode 100644 configs/orangepi_zero_plus2_defconfig
create mode 100644 configs/pine64_defconfig
create mode 100644 configs/pine64_sopine_defconfig
--
1.9.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 01/11] arm-trusted-firmware: Build FIP for BL33
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 02/11] uboot: Add U-Boot-bundles-ATF support Jagan Teki
` (9 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
To build FIP for Juno, we need to set BL33 for non-BL33
there is no need to build the FIP, so this patch adjust
the make to handle both scenarios.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index 7b1cc6e..5b4e3b0 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -28,21 +28,25 @@ ARM_TRUSTED_FIRMWARE_INSTALL_IMAGES = YES
ARM_TRUSTED_FIRMWARE_PLATFORM = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM))
+ARM_TRUSTED_FIRMWARE_CMDS += all
+
ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \
CROSS_COMPILE="$(TARGET_CROSS)" \
- BL33=$(BINARIES_DIR)/u-boot.bin \
$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES)) \
PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM)
ifeq ($(BR2_TARGET_VEXPRESS_FIRMWARE),y)
-ARM_TRUSTED_FIRMWARE_MAKE_OPTS += SCP_BL2=$(BINARIES_DIR)/scp-fw.bin
ARM_TRUSTED_FIRMWARE_DEPENDENCIES += vexpress-firmware
+ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \
+ BL33=$(BINARIES_DIR)/u-boot.bin \
+ SCP_BL2=$(BINARIES_DIR)/scp-fw.bin
+ARM_TRUSTED_FIRMWARE_CMDS += fip
endif
define ARM_TRUSTED_FIRMWARE_BUILD_CMDS
$(TARGET_CONFIGURE_OPTS) \
$(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
- all fip
+ $(ARM_TRUSTED_FIRMWARE_CMDS)
endef
define ARM_TRUSTED_FIRMWARE_INSTALL_IMAGES_CMDS
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 02/11] uboot: Add U-Boot-bundles-ATF support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 01/11] arm-trusted-firmware: Build FIP for BL33 Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 03/11] board: Add Bananapi M64 support Jagan Teki
` (8 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
For building U-Boot proper in Allwinner A64/H5, ATF need
to build first and ATF binary need to be exported.
U-Boot-bundles-ATF support export ATF binary and disable
U-Boot dependency in ATF becuase except U-Boot dependent
boards(like juno) ideally ATF will build prior to U-Boot.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 2 ++
boot/uboot/Config.in | 10 ++++++++++
boot/uboot/uboot.mk | 5 +++++
3 files changed, 17 insertions(+)
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index 5b4e3b0..c0af8e8 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -8,7 +8,9 @@ ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_V
ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause
ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst
+ifeq ($(BR2_TARGET_UBOOT_NEEDS_ATF),)
ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot
+endif
ifeq ($(ARM_TRUSTED_FIRMWARE_VERSION),custom)
# Handle custom ATF tarballs as specified by the configuration
diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index 8215912..4751593 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -158,6 +158,16 @@ config BR2_TARGET_UBOOT_NEEDS_OPENSSL
typically the case when the board configuration has
CONFIG_FIT_SIGNATURE enabled.
+config BR2_TARGET_UBOOT_NEEDS_ATF
+ bool "U-Boot needs ATF"
+ depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE
+ help
+ For building U-Boot proper in Allwinner A64/H5, ATF need
+ to build first and ATF binary need to be exported.
+ This config typically export ATF binary and disable
+ U-Boot dependency in ATF becuase except U-Boot dependent
+ boards(like juno) ideally ATF will build prior to U-Boot.
+
menu "U-Boot binary format"
config BR2_TARGET_UBOOT_FORMAT_AIS
diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
index fdacf16..cbd2225 100644
--- a/boot/uboot/uboot.mk
+++ b/boot/uboot/uboot.mk
@@ -134,6 +134,11 @@ UBOOT_MAKE_OPTS += \
HOSTCC="$(HOSTCC) $(HOST_CFLAGS)" \
HOSTLDFLAGS="$(HOST_LDFLAGS)"
+ifeq ($(BR2_TARGET_UBOOT_NEEDS_ATF),y)
+UBOOT_MAKE_OPTS += \
+ BL31=${BUILD_DIR}/arm-trusted-firmware-${BR2_TARGET_ARM_TRUSTED_FIRMWARE_VERSION}/build/${BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM}/release/${BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES}.bin
+endif
+
ifeq ($(BR2_TARGET_UBOOT_NEEDS_DTC),y)
UBOOT_DEPENDENCIES += host-dtc
endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 03/11] board: Add Bananapi M64 support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 01/11] arm-trusted-firmware: Build FIP for BL33 Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 02/11] uboot: Add U-Boot-bundles-ATF support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 04/11] board: Add Pine64 support Jagan Teki
` (7 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for bananapi M64 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei at banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 1 +
board/bananapi/bananapi-m64/boot.cmd | 6 ++++
board/bananapi/bananapi-m64/genimage.cfg | 38 ++++++++++++++++++++++++++
board/bananapi/bananapi-m64/readme.txt | 37 +++++++++++++++++++++++++
configs/bananapi_m64_defconfig | 47 ++++++++++++++++++++++++++++++++
6 files changed, 130 insertions(+)
create mode 100644 board/bananapi/bananapi-m64/boot.cmd
create mode 100644 board/bananapi/bananapi-m64/genimage.cfg
create mode 100644 board/bananapi/bananapi-m64/readme.txt
create mode 100644 configs/bananapi_m64_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index ebaac7a..3dd4f48 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -90,6 +90,7 @@ atmel_sama5d4_xplained_mmc_defconfig: *defconfig
atmel_sama5d4_xplained_mmc_dev_defconfig: *defconfig
bananapi_m1_defconfig: *defconfig
bananapi_m2_plus_defconfig: *defconfig
+bananapi_m64_defconfig: *defconfig
bananapro_defconfig: *defconfig
beagleboardx15_defconfig: *defconfig
beaglebone_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 51283f1..6521aad 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -729,6 +729,7 @@ N: Jagan Teki <jagan@amarulasolutions.com>
F: board/bananapi/
F: board/engicam/
F: configs/bananapi_m1_defconfig
+F: configs/bananapi_m64_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
diff --git a/board/bananapi/bananapi-m64/boot.cmd b/board/bananapi/bananapi-m64/boot.cmd
new file mode 100644
index 0000000..d35c9b0
--- /dev/null
+++ b/board/bananapi/bananapi-m64/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-bananapi-m64.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/bananapi/bananapi-m64/genimage.cfg b/board/bananapi/bananapi-m64/genimage.cfg
new file mode 100644
index 0000000..891217c
--- /dev/null
+++ b/board/bananapi/bananapi-m64/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-bananapi-m64.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/bananapi/bananapi-m64/readme.txt b/board/bananapi/bananapi-m64/readme.txt
new file mode 100644
index 0000000..0dec3e5
--- /dev/null
+++ b/board/bananapi/bananapi-m64/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Bananapi M64. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Bananapi M64 link:
+http://www.banana-pi.org/m64.html
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M64
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make bananapi_m64_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Bananapi M64 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
new file mode 100644
index 0000000..168c93e
--- /dev/null
+++ b/configs/bananapi_m64_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m64"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m64/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-bananapi-m64"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M64"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m64/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 04/11] board: Add Pine64 support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (2 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 03/11] board: Add Bananapi M64 support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
[not found] ` <b8d92229-8f0c-2edf-7451-13ad2393eb4b@arm.com>
2017-10-26 18:11 ` [Buildroot] [PATCH v4 05/11] board: Add SoPine support Jagan Teki
` (6 subsequent siblings)
10 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for Pine64 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/pine64/pine64/boot.cmd | 6 +++++
board/pine64/pine64/genimage.cfg | 38 ++++++++++++++++++++++++++++++++
board/pine64/pine64/readme.txt | 38 ++++++++++++++++++++++++++++++++
configs/pine64_defconfig | 47 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 132 insertions(+)
create mode 100644 board/pine64/pine64/boot.cmd
create mode 100644 board/pine64/pine64/genimage.cfg
create mode 100644 board/pine64/pine64/readme.txt
create mode 100644 configs/pine64_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 3dd4f48..44edc61 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -161,6 +161,7 @@ orangepi_zero_defconfig: *defconfig
pandaboard_defconfig: *defconfig
pc_x86_64_bios_defconfig: *defconfig
pc_x86_64_efi_defconfig: *defconfig
+pine64_defconfig: *defconfig
qemu_aarch64_virt_defconfig: *defconfig
qemu_arm_versatile_defconfig: *defconfig
qemu_arm_versatile_nommu_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 6521aad..780c674 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -728,8 +728,10 @@ F: package/keepalived/
N: Jagan Teki <jagan@amarulasolutions.com>
F: board/bananapi/
F: board/engicam/
+F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
+F: configs/pine64_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
diff --git a/board/pine64/pine64/boot.cmd b/board/pine64/pine64/boot.cmd
new file mode 100644
index 0000000..14f5610
--- /dev/null
+++ b/board/pine64/pine64/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-pine64.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/pine64/pine64/genimage.cfg b/board/pine64/pine64/genimage.cfg
new file mode 100644
index 0000000..8e12308
--- /dev/null
+++ b/board/pine64/pine64/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-pine64.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/pine64/pine64/readme.txt b/board/pine64/pine64/readme.txt
new file mode 100644
index 0000000..54e6f9c
--- /dev/null
+++ b/board/pine64/pine64/readme.txt
@@ -0,0 +1,38 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Pine64. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Pine64 link:
+https://www.pine64.org/?page_id=1194
+
+Wiki link:
+https://confluence.amarulasolutions.com/display/ODWIKI/Pine64
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make pine64_defconfig
+
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Pine64 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig
new file mode 100644
index 0000000..76d2d77
--- /dev/null
+++ b/configs/pine64_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_plus"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pine64/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 05/11] board: Add SoPine support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (3 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 04/11] board: Add Pine64 support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-31 1:28 ` André Przywara
2017-10-26 18:11 ` [Buildroot] [PATCH v4 06/11] board: Add FriendlyARM Nanopi A64 support Jagan Teki
` (5 subsequent siblings)
10 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for SoPine board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 1 +
board/pine64/sopine/boot.cmd | 6 +++++
board/pine64/sopine/genimage.cfg | 38 ++++++++++++++++++++++++++++++++
board/pine64/sopine/readme.txt | 38 ++++++++++++++++++++++++++++++++
configs/pine64_sopine_defconfig | 47 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/pine64/sopine/boot.cmd
create mode 100644 board/pine64/sopine/genimage.cfg
create mode 100644 board/pine64/sopine/readme.txt
create mode 100644 configs/pine64_sopine_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 44edc61..a690b17 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -162,6 +162,7 @@ pandaboard_defconfig: *defconfig
pc_x86_64_bios_defconfig: *defconfig
pc_x86_64_efi_defconfig: *defconfig
pine64_defconfig: *defconfig
+pine64_sopine_defconfig: *defconfig
qemu_aarch64_virt_defconfig: *defconfig
qemu_arm_versatile_defconfig: *defconfig
qemu_arm_versatile_nommu_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 780c674..106d793 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -732,6 +732,7 @@ F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/pine64_defconfig
+F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
diff --git a/board/pine64/sopine/boot.cmd b/board/pine64/sopine/boot.cmd
new file mode 100644
index 0000000..79ac4d0
--- /dev/null
+++ b/board/pine64/sopine/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-pine64-plus.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/pine64/sopine/genimage.cfg b/board/pine64/sopine/genimage.cfg
new file mode 100644
index 0000000..c1d77c7
--- /dev/null
+++ b/board/pine64/sopine/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-pine64-plus.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/pine64/sopine/readme.txt b/board/pine64/sopine/readme.txt
new file mode 100644
index 0000000..05d26ee
--- /dev/null
+++ b/board/pine64/sopine/readme.txt
@@ -0,0 +1,38 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the SoPine. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+SoPINE link:
+https://www.pine64.org/?page_id=1491
+
+Wiki link:
+https://confluence.amarulasolutions.com/display/ODWIKI/Pine64+SoPine
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make pine64_sopine_defconfig
+
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your SoPine and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/pine64_sopine_defconfig b/configs/pine64_sopine_defconfig
new file mode 100644
index 0000000..3850c8e
--- /dev/null
+++ b/configs/pine64_sopine_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sopine_baseboard"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/pine64/sopine/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64-plus"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64 SOPINE"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/sopine/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 06/11] board: Add FriendlyARM Nanopi A64 support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (4 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 05/11] board: Add SoPine support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 07/11] board: Add FriendlyARM Nanopi NEO2 support Jagan Teki
` (4 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for FriendlyARM Nanopi A64 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 +
board/friendlyarm/nanopi-a64/boot.cmd | 6 +
board/friendlyarm/nanopi-a64/genimage.cfg | 38 +++
board/friendlyarm/nanopi-a64/linux_axp.fragment | 3 +
...nner-a64-add-NMI-R_INTC-controller-on-A64.patch | 41 ++++
...lwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch | 176 ++++++++++++++
...winner-a64-Add-initial-NanoPi-A64-support.patch | 254 +++++++++++++++++++++
board/friendlyarm/nanopi-a64/readme.txt | 37 +++
configs/friendlyarm_nanopi_a64_defconfig | 51 +++++
10 files changed, 609 insertions(+)
create mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
create mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
create mode 100644 board/friendlyarm/nanopi-a64/linux_axp.fragment
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
create mode 100644 board/friendlyarm/nanopi-a64/patches/linux/linux-0003-arm64-allwinner-a64-Add-initial-NanoPi-A64-support.patch
create mode 100644 board/friendlyarm/nanopi-a64/readme.txt
create mode 100644 configs/friendlyarm_nanopi_a64_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index a690b17..9e566de 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -119,6 +119,7 @@ freescale_imx6ulevk_defconfig: *defconfig
freescale_imx7dsabresd_defconfig: *defconfig
freescale_mpc8315erdb_defconfig: *defconfig
freescale_p1010rdb_pa_defconfig: *defconfig
+friendlyarm_nanopi_a64_defconfig: *defconfig
galileo_defconfig: *defconfig
gdb_bfin_bf512_defconfig: *defconfig
grinn_chiliboard_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 106d793..cae3730 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -728,9 +728,11 @@ F: package/keepalived/
N: Jagan Teki <jagan@amarulasolutions.com>
F: board/bananapi/
F: board/engicam/
+F: board/friendlyarm/nanopi-a64/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
+F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
diff --git a/board/friendlyarm/nanopi-a64/boot.cmd b/board/friendlyarm/nanopi-a64/boot.cmd
new file mode 100644
index 0000000..446bd85
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-nanopi-a64.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-a64/genimage.cfg b/board/friendlyarm/nanopi-a64/genimage.cfg
new file mode 100644
index 0000000..edfb52d
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-nanopi-a64.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-a64/linux_axp.fragment b/board/friendlyarm/nanopi-a64/linux_axp.fragment
new file mode 100644
index 0000000..b19bc65
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/linux_axp.fragment
@@ -0,0 +1,3 @@
+CONFIG_SUNXI_RSB=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_REGULATOR_AXP20X=y
diff --git a/board/friendlyarm/nanopi-a64/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch b/board/friendlyarm/nanopi-a64/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
new file mode 100644
index 0000000..ccbaec5
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
@@ -0,0 +1,41 @@
+From 535ca50858e2d8bf1618ace056cd96f0b3d01133 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Tue, 6 Jun 2017 13:59:32 +0800
+Subject: [PATCH] arm64: allwinner: a64: add NMI (R_INTC) controller on A64
+
+Allwinner A64 SoC features a R_INTC controller, which controls the NMI
+line, and this interrupt line is usually connected to the AXP PMIC.
+
+Add support for it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+[wens at csie.org: Add fallback sun6i-a31-r-intc compatible]
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+index 9d00622..78c7c9d 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -487,6 +487,15 @@
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ r_intc: interrupt-controller at 1f00c00 {
++ compatible = "allwinner,sun50i-a64-r-intc",
++ "allwinner,sun6i-a31-r-intc";
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ reg = <0x01f00c00 0x400>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
+ r_ccu: clock at 1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+--
+2.7.4
+
diff --git a/board/friendlyarm/nanopi-a64/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch b/board/friendlyarm/nanopi-a64/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
new file mode 100644
index 0000000..3a6a9ef
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
@@ -0,0 +1,176 @@
+From 4c0a84757b5a0365a5dde82e732972eda80a32b1 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Thu, 18 May 2017 15:16:51 +0800
+Subject: [PATCH] arm64: allwinner: a64: add DTSI file for AXP803 PMIC
+
+As nearly all A64 boards are using AXP803 PMIC, add a DTSI file for it,
+like the old DTSI files for AXP20x/22x, for the common parts of the
+PMIC.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Acked-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/axp803.dtsi | 150 ++++++++++++++++++++++++++++++
+ 1 file changed, 150 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/axp803.dtsi
+
+diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
+new file mode 100644
+index 0000000..ff8af52
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
+@@ -0,0 +1,150 @@
++/*
++ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/*
++ * AXP803 Integrated Power Management Chip
++ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
++ */
++
++&axp803 {
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ regulators {
++ /* Default work frequency for buck regulators */
++ x-powers,dcdc-freq = <3000>;
++
++ reg_aldo1: aldo1 {
++ regulator-name = "aldo1";
++ };
++
++ reg_aldo2: aldo2 {
++ regulator-name = "aldo2";
++ };
++
++ reg_aldo3: aldo3 {
++ regulator-name = "aldo3";
++ };
++
++ reg_dc1sw: dc1sw {
++ regulator-name = "dc1sw";
++ };
++
++ reg_dcdc1: dcdc1 {
++ regulator-name = "dcdc1";
++ };
++
++ reg_dcdc2: dcdc2 {
++ regulator-name = "dcdc2";
++ };
++
++ reg_dcdc3: dcdc3 {
++ regulator-name = "dcdc3";
++ };
++
++ reg_dcdc4: dcdc4 {
++ regulator-name = "dcdc4";
++ };
++
++ reg_dcdc5: dcdc5 {
++ regulator-name = "dcdc5";
++ };
++
++ reg_dcdc6: dcdc6 {
++ regulator-name = "dcdc6";
++ };
++
++ reg_dldo1: dldo1 {
++ regulator-name = "dldo1";
++ };
++
++ reg_dldo2: dldo2 {
++ regulator-name = "dldo2";
++ };
++
++ reg_dldo3: dldo3 {
++ regulator-name = "dldo3";
++ };
++
++ reg_dldo4: dldo4 {
++ regulator-name = "dldo4";
++ };
++
++ reg_eldo1: eldo1 {
++ regulator-name = "eldo1";
++ };
++
++ reg_eldo2: eldo2 {
++ regulator-name = "eldo2";
++ };
++
++ reg_eldo3: eldo3 {
++ regulator-name = "eldo3";
++ };
++
++ reg_fldo1: fldo1 {
++ regulator-name = "fldo1";
++ };
++
++ reg_fldo2: fldo2 {
++ regulator-name = "fldo2";
++ };
++
++ reg_ldo_io0: ldo-io0 {
++ regulator-name = "ldo-io0";
++ status = "disabled";
++ };
++
++ reg_ldo_io1: ldo-io1 {
++ regulator-name = "ldo-io1";
++ status = "disabled";
++ };
++
++ reg_rtc_ldo: rtc-ldo {
++ /* RTC_LDO is a fixed, always-on regulator */
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "rtc-ldo";
++ };
++ };
++};
+--
+2.7.4
+
diff --git a/board/friendlyarm/nanopi-a64/patches/linux/linux-0003-arm64-allwinner-a64-Add-initial-NanoPi-A64-support.patch b/board/friendlyarm/nanopi-a64/patches/linux/linux-0003-arm64-allwinner-a64-Add-initial-NanoPi-A64-support.patch
new file mode 100644
index 0000000..c7eb4bf
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/patches/linux/linux-0003-arm64-allwinner-a64-Add-initial-NanoPi-A64-support.patch
@@ -0,0 +1,254 @@
+From bf397214530ee5c873dac7b12126b250afd3831f Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 14 Aug 2017 16:06:53 +0530
+Subject: [PATCH] arm64: allwinner: a64: Add initial NanoPi A64 support
+
+NanoPi A64 is a new board of high performance with low cost
+designed by FriendlyElec., using the Allwinner A64 SOC.
+
+Nanopi A64 features
+- Allwinner A64, 64-bit Quad-core Cortex-A53 at 648MHz to 1.152GHz, DVFS
+- 1GB DDR3 RAM
+- MicroSD
+- Gigabit Ethernet (RTL8211E)
+- Wi-Fi 802.11b/g/n
+- IR receiver
+- Audio In/Out
+- Video In/Out
+- Serial Debug Port
+- microUSB 5V 2A DC power-supply
+
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/Makefile | 1 +
+ .../boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 207 +++++++++++++++++++++
+ 2 files changed, 208 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+
+diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
+index 108f12c..c997b5c 100644
+--- a/arch/arm64/boot/dts/allwinner/Makefile
++++ b/arch/arm64/boot/dts/allwinner/Makefile
+@@ -1,4 +1,5 @@
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+new file mode 100644
+index 0000000..2beef9e
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+@@ -0,0 +1,207 @@
++/*
++ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "sun50i-a64.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ model = "FriendlyARM NanoPi A64";
++ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++/* i2c1 connected with gpio headers like pine64, bananapi */
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
++ status = "disabled";
++};
++
++&i2c1_pins {
++ bias-pull-up;
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins>;
++ vmmc-supply = <®_dcdc1>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
++ cd-inverted;
++ disable-wp;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&r_rsb {
++ status = "okay";
++
++ axp803: pmic at 3a3 {
++ compatible = "x-powers,axp803";
++ reg = <0x3a3>;
++ interrupt-parent = <&r_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++#include "axp803.dtsi"
++
++®_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pl";
++};
++
++®_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++®_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v";
++};
++
++®_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1040000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++®_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++®_dcdc6 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-sys";
++};
++
++®_dldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-hdmi-dsi";
++};
++
++®_dldo4 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-pg-wifi-io";
++};
++
++®_eldo1 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "cpvdd";
++};
++
++®_fldo1 {
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "vcc-1v2-hsic";
++};
++
++/*
++ * The A64 chip cannot work without this regulator off, although
++ * it seems to be only driving the AR100 core.
++ * Maybe we don't still know well about CPUs domain.
++ */
++®_fldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-cpus";
++};
++
++®_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usbphy {
++ status = "okay";
++};
+--
+2.7.4
+
diff --git a/board/friendlyarm/nanopi-a64/readme.txt b/board/friendlyarm/nanopi-a64/readme.txt
new file mode 100644
index 0000000..77a5167
--- /dev/null
+++ b/board/friendlyarm/nanopi-a64/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi A64. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi A64 link:
+http://nanopi.io/nanopi-a64.html
+
+Wiki link:
+https://confluence.amarulasolutions.com/display/ODWIKI/FriendlyARM+Nanopi+A64
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make friendlyarm_nanopi_a64_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Nanopi A64 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/friendlyarm_nanopi_a64_defconfig b/configs/friendlyarm_nanopi_a64_defconfig
new file mode 100644
index 0000000..59d381a
--- /dev/null
+++ b/configs/friendlyarm_nanopi_a64_defconfig
@@ -0,0 +1,51 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Patch dir
+BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-a64/patches"
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_a64"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-a64/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-nanopi-a64"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-a64/linux_axp.fragment"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi A64"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-a64/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 07/11] board: Add FriendlyARM Nanopi NEO2 support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (5 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 06/11] board: Add FriendlyARM Nanopi A64 support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 08/11] board: Add Olimex A64-OLinuXino support Jagan Teki
` (3 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/friendlyarm/nanopi-neo2/boot.cmd | 6 ++++
board/friendlyarm/nanopi-neo2/genimage.cfg | 38 ++++++++++++++++++++++++
board/friendlyarm/nanopi-neo2/readme.txt | 37 +++++++++++++++++++++++
configs/friendlyarm_nanopi_neo2_defconfig | 47 ++++++++++++++++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 9e566de..f09c8da 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -120,6 +120,7 @@ freescale_imx7dsabresd_defconfig: *defconfig
freescale_mpc8315erdb_defconfig: *defconfig
freescale_p1010rdb_pa_defconfig: *defconfig
friendlyarm_nanopi_a64_defconfig: *defconfig
+friendlyarm_nanopi_neo2_defconfig: *defconfig
galileo_defconfig: *defconfig
gdb_bfin_bf512_defconfig: *defconfig
grinn_chiliboard_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index cae3730..1832310 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -729,10 +729,12 @@ N: Jagan Teki <jagan@amarulasolutions.com>
F: board/bananapi/
F: board/engicam/
F: board/friendlyarm/nanopi-a64/
+F: board/friendlyarm/nanopi-neo2/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
+F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
diff --git a/board/friendlyarm/nanopi-neo2/boot.cmd b/board/friendlyarm/nanopi-neo2/boot.cmd
new file mode 100644
index 0000000..9a39f4a
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo2.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg
new file mode 100644
index 0000000..a1156a4
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h5-nanopi-neo2.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt
new file mode 100644
index 0000000..0f445e2
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi NEO2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi NEO2 link:
+http://nanopi.io/nanopi-neo2.html
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+NanoPi+NEO2
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make friendlyarm_nanopi_neo2_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Nanopi NEO2 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig
new file mode 100644
index 0000000..4842c3e
--- /dev/null
+++ b/configs/friendlyarm_nanopi_neo2_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo2/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 08/11] board: Add Olimex A64-OLinuXino support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (6 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 07/11] board: Add FriendlyARM Nanopi NEO2 support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 09/11] board: Add Orangepi Win/Win Plus support Jagan Teki
` (2 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for Olimex A64-OLinuXino board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 +
board/olimex/a64-olinuxino/boot.cmd | 6 +
board/olimex/a64-olinuxino/genimage.cfg | 38 ++++
board/olimex/a64-olinuxino/linux_axp.fragment | 3 +
...nner-a64-add-NMI-R_INTC-controller-on-A64.patch | 41 ++++
...lwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch | 176 +++++++++++++++
...nner-a64-Add-A64-OLinuXino-initial-suppor.patch | 244 +++++++++++++++++++++
board/olimex/a64-olinuxino/readme.txt | 37 ++++
configs/olimex_a64_olinuxino_defconfig | 51 +++++
10 files changed, 599 insertions(+)
create mode 100644 board/olimex/a64-olinuxino/boot.cmd
create mode 100644 board/olimex/a64-olinuxino/genimage.cfg
create mode 100644 board/olimex/a64-olinuxino/linux_axp.fragment
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
create mode 100644 board/olimex/a64-olinuxino/patches/linux/linux-0003-arm64-allwinner-a64-Add-A64-OLinuXino-initial-suppor.patch
create mode 100644 board/olimex/a64-olinuxino/readme.txt
create mode 100644 configs/olimex_a64_olinuxino_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index f09c8da..8c6d2b3 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -154,6 +154,7 @@ olimex_a20_olinuxino_lime2_defconfig: *defconfig
olimex_a20_olinuxino_lime_defconfig: *defconfig
olimex_a20_olinuxino_lime_mali_defconfig: *defconfig
olimex_a20_olinuxino_micro_defconfig: *defconfig
+olimex_a64_olinuxino_defconfig: *defconfig
olimex_imx233_olinuxino_defconfig: *defconfig
openblocks_a6_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 1832310..1ae83f2 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -730,11 +730,13 @@ F: board/bananapi/
F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
+F: board/olimex/a64-olinuxino/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
+F: configs/olimex_a64_olinuxino_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
diff --git a/board/olimex/a64-olinuxino/boot.cmd b/board/olimex/a64-olinuxino/boot.cmd
new file mode 100644
index 0000000..28ed6d9
--- /dev/null
+++ b/board/olimex/a64-olinuxino/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-olinuxino.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/olimex/a64-olinuxino/genimage.cfg b/board/olimex/a64-olinuxino/genimage.cfg
new file mode 100644
index 0000000..a365bfe
--- /dev/null
+++ b/board/olimex/a64-olinuxino/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-olinuxino.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/olimex/a64-olinuxino/linux_axp.fragment b/board/olimex/a64-olinuxino/linux_axp.fragment
new file mode 100644
index 0000000..b19bc65
--- /dev/null
+++ b/board/olimex/a64-olinuxino/linux_axp.fragment
@@ -0,0 +1,3 @@
+CONFIG_SUNXI_RSB=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_REGULATOR_AXP20X=y
diff --git a/board/olimex/a64-olinuxino/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch b/board/olimex/a64-olinuxino/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
new file mode 100644
index 0000000..ccbaec5
--- /dev/null
+++ b/board/olimex/a64-olinuxino/patches/linux/linux-0001-arm64-allwinner-a64-add-NMI-R_INTC-controller-on-A64.patch
@@ -0,0 +1,41 @@
+From 535ca50858e2d8bf1618ace056cd96f0b3d01133 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Tue, 6 Jun 2017 13:59:32 +0800
+Subject: [PATCH] arm64: allwinner: a64: add NMI (R_INTC) controller on A64
+
+Allwinner A64 SoC features a R_INTC controller, which controls the NMI
+line, and this interrupt line is usually connected to the AXP PMIC.
+
+Add support for it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+[wens at csie.org: Add fallback sun6i-a31-r-intc compatible]
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+index 9d00622..78c7c9d 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -487,6 +487,15 @@
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ r_intc: interrupt-controller at 1f00c00 {
++ compatible = "allwinner,sun50i-a64-r-intc",
++ "allwinner,sun6i-a31-r-intc";
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ reg = <0x01f00c00 0x400>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
+ r_ccu: clock at 1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+--
+2.7.4
+
diff --git a/board/olimex/a64-olinuxino/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch b/board/olimex/a64-olinuxino/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
new file mode 100644
index 0000000..3a6a9ef
--- /dev/null
+++ b/board/olimex/a64-olinuxino/patches/linux/linux-0002-arm64-allwinner-a64-add-DTSI-file-for-AXP803-PMIC.patch
@@ -0,0 +1,176 @@
+From 4c0a84757b5a0365a5dde82e732972eda80a32b1 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Thu, 18 May 2017 15:16:51 +0800
+Subject: [PATCH] arm64: allwinner: a64: add DTSI file for AXP803 PMIC
+
+As nearly all A64 boards are using AXP803 PMIC, add a DTSI file for it,
+like the old DTSI files for AXP20x/22x, for the common parts of the
+PMIC.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Acked-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/axp803.dtsi | 150 ++++++++++++++++++++++++++++++
+ 1 file changed, 150 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/axp803.dtsi
+
+diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
+new file mode 100644
+index 0000000..ff8af52
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
+@@ -0,0 +1,150 @@
++/*
++ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/*
++ * AXP803 Integrated Power Management Chip
++ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
++ */
++
++&axp803 {
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ regulators {
++ /* Default work frequency for buck regulators */
++ x-powers,dcdc-freq = <3000>;
++
++ reg_aldo1: aldo1 {
++ regulator-name = "aldo1";
++ };
++
++ reg_aldo2: aldo2 {
++ regulator-name = "aldo2";
++ };
++
++ reg_aldo3: aldo3 {
++ regulator-name = "aldo3";
++ };
++
++ reg_dc1sw: dc1sw {
++ regulator-name = "dc1sw";
++ };
++
++ reg_dcdc1: dcdc1 {
++ regulator-name = "dcdc1";
++ };
++
++ reg_dcdc2: dcdc2 {
++ regulator-name = "dcdc2";
++ };
++
++ reg_dcdc3: dcdc3 {
++ regulator-name = "dcdc3";
++ };
++
++ reg_dcdc4: dcdc4 {
++ regulator-name = "dcdc4";
++ };
++
++ reg_dcdc5: dcdc5 {
++ regulator-name = "dcdc5";
++ };
++
++ reg_dcdc6: dcdc6 {
++ regulator-name = "dcdc6";
++ };
++
++ reg_dldo1: dldo1 {
++ regulator-name = "dldo1";
++ };
++
++ reg_dldo2: dldo2 {
++ regulator-name = "dldo2";
++ };
++
++ reg_dldo3: dldo3 {
++ regulator-name = "dldo3";
++ };
++
++ reg_dldo4: dldo4 {
++ regulator-name = "dldo4";
++ };
++
++ reg_eldo1: eldo1 {
++ regulator-name = "eldo1";
++ };
++
++ reg_eldo2: eldo2 {
++ regulator-name = "eldo2";
++ };
++
++ reg_eldo3: eldo3 {
++ regulator-name = "eldo3";
++ };
++
++ reg_fldo1: fldo1 {
++ regulator-name = "fldo1";
++ };
++
++ reg_fldo2: fldo2 {
++ regulator-name = "fldo2";
++ };
++
++ reg_ldo_io0: ldo-io0 {
++ regulator-name = "ldo-io0";
++ status = "disabled";
++ };
++
++ reg_ldo_io1: ldo-io1 {
++ regulator-name = "ldo-io1";
++ status = "disabled";
++ };
++
++ reg_rtc_ldo: rtc-ldo {
++ /* RTC_LDO is a fixed, always-on regulator */
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "rtc-ldo";
++ };
++ };
++};
+--
+2.7.4
+
diff --git a/board/olimex/a64-olinuxino/patches/linux/linux-0003-arm64-allwinner-a64-Add-A64-OLinuXino-initial-suppor.patch b/board/olimex/a64-olinuxino/patches/linux/linux-0003-arm64-allwinner-a64-Add-A64-OLinuXino-initial-suppor.patch
new file mode 100644
index 0000000..774636e
--- /dev/null
+++ b/board/olimex/a64-olinuxino/patches/linux/linux-0003-arm64-allwinner-a64-Add-A64-OLinuXino-initial-suppor.patch
@@ -0,0 +1,244 @@
+From 4eb9df9f809343b4dc47085807d8168acfa0d17a Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 14 Aug 2017 16:16:04 +0530
+Subject: [PATCH] arm64: allwinner: a64: Add A64-OLinuXino initial support
+
+OLimex A64-OLinuXino is an open-source hardware board
+using the Allwinner A64 SOC.
+
+OLimex A64-OLinuXino has
+- A64 Quad-core Cortex-A53 64bit
+- 1GB or 2GB RAM DDR3L @ 672Mhz
+- microSD slot and 4/8/16GB eMMC
+- Debug TTL UART
+- HDMI
+- LCD
+- IR receiver
+- 5V DC power supply
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+---
+ arch/arm64/boot/dts/allwinner/Makefile | 1 +
+ .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 199 +++++++++++++++++++++
+ 2 files changed, 200 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+
+diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
+index 108f12c..bd2d3f0 100644
+--- a/arch/arm64/boot/dts/allwinner/Makefile
++++ b/arch/arm64/boot/dts/allwinner/Makefile
+@@ -1,4 +1,5 @@
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+new file mode 100644
+index 0000000..338e7861
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+@@ -0,0 +1,199 @@
++/*
++ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "sun50i-a64.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ model = "Olimex A64-Olinuxino";
++ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins>;
++ vmmc-supply = <®_dcdc1>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
++ cd-inverted;
++ disable-wp;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&r_rsb {
++ status = "okay";
++
++ axp803: pmic at 3a3 {
++ compatible = "x-powers,axp803";
++ reg = <0x3a3>;
++ interrupt-parent = <&r_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++#include "axp803.dtsi"
++
++®_aldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "vcc-pe";
++};
++
++®_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pl";
++};
++
++®_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++®_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-3v3";
++};
++
++®_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1040000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++®_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-ddr3";
++};
++
++®_dcdc6 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-sys";
++};
++
++®_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-hdmi";
++};
++
++®_dldo2 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-mipi";
++};
++
++®_dldo3 {
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "vcc-avdd-csi";
++};
++
++®_dldo4 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi-io";
++};
++
++®_eldo1 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "cpvdd";
++};
++
++®_eldo2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc-dvdd-csi";
++};
++
++®_fldo1 {
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "vcc-1v2-hsic";
++};
++
++/*
++ * The A64 chip cannot work without this regulator off, although
++ * it seems to be only driving the AR100 core.
++ * Maybe we don't still know well about CPUs domain.
++ */
++®_fldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-cpus";
++};
++
++®_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
+--
+2.7.4
+
diff --git a/board/olimex/a64-olinuxino/readme.txt b/board/olimex/a64-olinuxino/readme.txt
new file mode 100644
index 0000000..342bdc7
--- /dev/null
+++ b/board/olimex/a64-olinuxino/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the A64-OLinuXino. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+A64-OLinuXino link:
+https://www.olimex.com/Products/OLinuXino/A64/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Olimex+A64-Olinuxino
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make olimex_a64_olinuxino_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your A64-OLinuXino and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/olimex_a64_olinuxino_defconfig b/configs/olimex_a64_olinuxino_defconfig
new file mode 100644
index 0000000..631f806
--- /dev/null
+++ b/configs/olimex_a64_olinuxino_defconfig
@@ -0,0 +1,51 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Patch dir
+BR2_GLOBAL_PATCH_DIR="board/olimex/a64-olinuxino/patches"
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="a64-olinuxino"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a64-olinuxino/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-olinuxino"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a64-olinuxino/linux_axp.fragment"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Olimex A64-OLinuXino"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a64-olinuxino/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 09/11] board: Add Orangepi Win/Win Plus support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (7 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 08/11] board: Add Olimex A64-OLinuXino support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 10/11] board: Add Orangepi Prime support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support Jagan Teki
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for Orangepi Win/Win Plus board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/orangepi/orangepi-win/boot.cmd | 6 ++++
board/orangepi/orangepi-win/genimage.cfg | 38 ++++++++++++++++++++++++++
board/orangepi/orangepi-win/readme.txt | 37 +++++++++++++++++++++++++
configs/orangepi_win_defconfig | 47 ++++++++++++++++++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/orangepi/orangepi-win/boot.cmd
create mode 100644 board/orangepi/orangepi-win/genimage.cfg
create mode 100644 board/orangepi/orangepi-win/readme.txt
create mode 100644 configs/orangepi_win_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 8c6d2b3..8cf4ae2 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -160,6 +160,7 @@ openblocks_a6_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
orangepi_pc_defconfig: *defconfig
orangepi_plus_defconfig: *defconfig
+orangepi_win_defconfig: *defconfig
orangepi_zero_defconfig: *defconfig
pandaboard_defconfig: *defconfig
pc_x86_64_bios_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 1ae83f2..123e444 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -731,12 +731,14 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-win/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_win_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
diff --git a/board/orangepi/orangepi-win/boot.cmd b/board/orangepi/orangepi-win/boot.cmd
new file mode 100644
index 0000000..2ddb769
--- /dev/null
+++ b/board/orangepi/orangepi-win/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-orangepi-win.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-win/genimage.cfg b/board/orangepi/orangepi-win/genimage.cfg
new file mode 100644
index 0000000..36955d3
--- /dev/null
+++ b/board/orangepi/orangepi-win/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-orangepi-win.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/orangepi/orangepi-win/readme.txt b/board/orangepi/orangepi-win/readme.txt
new file mode 100644
index 0000000..93adddd
--- /dev/null
+++ b/board/orangepi/orangepi-win/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Win/Win Plus. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Win/Win Plus link:
+http://www.orangepi.org/OrangePiWin_WinPlus/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Win
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make orangepi_win_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Win/Win Plus and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
new file mode 100644
index 0000000..d88f1b6
--- /dev/null
+++ b/configs/orangepi_win_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_win"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-win/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-orangepi-win"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Win/Win Plus"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-win/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 10/11] board: Add Orangepi Prime support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (8 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 09/11] board: Add Orangepi Win/Win Plus support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support Jagan Teki
10 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for Orangepi Prime board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/orangepi/orangepi-prime/boot.cmd | 6 ++++
board/orangepi/orangepi-prime/genimage.cfg | 38 ++++++++++++++++++++++++
board/orangepi/orangepi-prime/readme.txt | 37 +++++++++++++++++++++++
configs/orangepi_prime_defconfig | 47 ++++++++++++++++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/orangepi/orangepi-prime/boot.cmd
create mode 100644 board/orangepi/orangepi-prime/genimage.cfg
create mode 100644 board/orangepi/orangepi-prime/readme.txt
create mode 100644 configs/orangepi_prime_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 8cf4ae2..ef4fa10 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -160,6 +160,7 @@ openblocks_a6_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
orangepi_pc_defconfig: *defconfig
orangepi_plus_defconfig: *defconfig
+orangepi_prime_defconfig: *defconfig
orangepi_win_defconfig: *defconfig
orangepi_zero_defconfig: *defconfig
pandaboard_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 123e444..40b9fd7 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -731,6 +731,7 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
F: board/pine64/
F: configs/bananapi_m1_defconfig
@@ -738,6 +739,7 @@ F: configs/bananapi_m64_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
diff --git a/board/orangepi/orangepi-prime/boot.cmd b/board/orangepi/orangepi-prime/boot.cmd
new file mode 100644
index 0000000..3488788
--- /dev/null
+++ b/board/orangepi/orangepi-prime/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-prime.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-prime/genimage.cfg b/board/orangepi/orangepi-prime/genimage.cfg
new file mode 100644
index 0000000..b973b02
--- /dev/null
+++ b/board/orangepi/orangepi-prime/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h5-orangepi-prime.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/orangepi/orangepi-prime/readme.txt b/board/orangepi/orangepi-prime/readme.txt
new file mode 100644
index 0000000..5811884
--- /dev/null
+++ b/board/orangepi/orangepi-prime/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Prime. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Prime link:
+http://www.orangepi.org/OrangePiPrime/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make orangepi_prime_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Prime and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
new file mode 100644
index 0000000..53ad5f4
--- /dev/null
+++ b/configs/orangepi_prime_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Prime"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-prime/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
` (9 preceding siblings ...)
2017-10-26 18:11 ` [Buildroot] [PATCH v4 10/11] board: Add Orangepi Prime support Jagan Teki
@ 2017-10-26 18:11 ` Jagan Teki
2017-10-29 21:07 ` Sergey Matyukevich
10 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2017-10-26 18:11 UTC (permalink / raw)
To: buildroot
Add initial support for Orangepi Zero Plus2 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/orangepi/orangepi-zero-plus2/boot.cmd | 6 ++++
board/orangepi/orangepi-zero-plus2/genimage.cfg | 38 ++++++++++++++++++++
board/orangepi/orangepi-zero-plus2/readme.txt | 37 +++++++++++++++++++
configs/orangepi_zero_plus2_defconfig | 47 +++++++++++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/orangepi/orangepi-zero-plus2/boot.cmd
create mode 100644 board/orangepi/orangepi-zero-plus2/genimage.cfg
create mode 100644 board/orangepi/orangepi-zero-plus2/readme.txt
create mode 100644 configs/orangepi_zero_plus2_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index ef4fa10..630cab1 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -163,6 +163,7 @@ orangepi_plus_defconfig: *defconfig
orangepi_prime_defconfig: *defconfig
orangepi_win_defconfig: *defconfig
orangepi_zero_defconfig: *defconfig
+orangepi_zero_plus2_defconfig: *defconfig
pandaboard_defconfig: *defconfig
pc_x86_64_bios_defconfig: *defconfig
pc_x86_64_efi_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 40b9fd7..f683c25 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -733,6 +733,7 @@ F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
+F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
@@ -741,6 +742,7 @@ F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
+F: configs/orangepi_zero_plus2_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
diff --git a/board/orangepi/orangepi-zero-plus2/boot.cmd b/board/orangepi/orangepi-zero-plus2/boot.cmd
new file mode 100644
index 0000000..4772a9b
--- /dev/null
+++ b/board/orangepi/orangepi-zero-plus2/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-zero-plus2.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-zero-plus2/genimage.cfg b/board/orangepi/orangepi-zero-plus2/genimage.cfg
new file mode 100644
index 0000000..0fe219e
--- /dev/null
+++ b/board/orangepi/orangepi-zero-plus2/genimage.cfg
@@ -0,0 +1,38 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h5-orangepi-zero-plus2.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/orangepi/orangepi-zero-plus2/readme.txt b/board/orangepi/orangepi-zero-plus2/readme.txt
new file mode 100644
index 0000000..322ba0e
--- /dev/null
+++ b/board/orangepi/orangepi-zero-plus2/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Zero Plus2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Zero Plus2 link:
+http://www.orangepi.org/OrangePiZeroPlus2/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Zero+Plus2
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make orangepi_zero_plus2_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Zero Plus2 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig
new file mode 100644
index 0000000..575053c
--- /dev/null
+++ b/configs/orangepi_zero_plus2_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="bl31"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-plus2/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-zero-plus2/genimage.cfg"
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support
2017-10-26 18:11 ` [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support Jagan Teki
@ 2017-10-29 21:07 ` Sergey Matyukevich
2017-10-29 21:32 ` Sergey Matyukevich
0 siblings, 1 reply; 20+ messages in thread
From: Sergey Matyukevich @ 2017-10-29 21:07 UTC (permalink / raw)
To: buildroot
Hi,
Add initial support for Orangepi Zero Plus2 board with below features:
> - U-Boot 2017.09
> - Linux 4.13.7
> - Default packages from buildroot
I applied the whole patch series on top of the current buildroot and tried
orange-pi-zero-plus2. Build is ok, booting u-boot and kernel from SD card
is ok as well.
However later on kernel is not able detect SD card, while eMMC is properly
detected. As a result, boot never completes. I guess SD cards in use should
not be a problem since my other boards (orange-pi-[zero|one]) work fine
with the same cards. s there anything I could miss ? Any DTS fixup maybe ?
Regards,
Sergey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171030/9b380e57/attachment.html>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support
2017-10-29 21:07 ` Sergey Matyukevich
@ 2017-10-29 21:32 ` Sergey Matyukevich
2017-10-30 7:19 ` Jagan Teki
0 siblings, 1 reply; 20+ messages in thread
From: Sergey Matyukevich @ 2017-10-29 21:32 UTC (permalink / raw)
To: buildroot
> Add initial support for Orangepi Zero Plus2 board with below features:
>> - U-Boot 2017.09
>> - Linux 4.13.7
>> - Default packages from buildroot
>
>
> I applied the whole patch series on top of the current buildroot and tried
> orange-pi-zero-plus2. Build is ok, booting u-boot and kernel from SD card
> is ok as well.
> However later on kernel is not able detect SD card, while eMMC is properly
> detected. As a result, boot never completes. I guess SD cards in use should
> not be a problem since my other boards (orange-pi-[zero|one]) work fine
> with the same cards. s there anything I could miss ? Any DTS fixup maybe ?
>
I stopped being lazy and did a bit more hacking around... With mmc debug
enabled the following message appears in dmesg when I try to _remove_ card
from the slot:
mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
Which brings us to the following dts fixup:
diff --git
a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index b6b7a561df8c..a42fd79a62a3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -71,7 +71,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
With this fix applied orange-pi-zero-plus2 boots fine.
Regards,
Sergey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171030/be116cd0/attachment.html>
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support
2017-10-29 21:32 ` Sergey Matyukevich
@ 2017-10-30 7:19 ` Jagan Teki
0 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-30 7:19 UTC (permalink / raw)
To: buildroot
On Mon, Oct 30, 2017 at 3:02 AM, Sergey Matyukevich <geomatsi@gmail.com> wrote:
>
>
>>>
>>> Add initial support for Orangepi Zero Plus2 board with below features:
>>> - U-Boot 2017.09
>>> - Linux 4.13.7
>>> - Default packages from buildroot
>>
>>
>> I applied the whole patch series on top of the current buildroot and tried
>> orange-pi-zero-plus2. Build is ok, booting u-boot and kernel from SD card is
>> ok as well.
>> However later on kernel is not able detect SD card, while eMMC is properly
>> detected. As a result, boot never completes. I guess SD cards in use should
>> not be a problem since my other boards (orange-pi-[zero|one]) work fine
>> with the same cards. s there anything I could miss ? Any DTS fixup maybe ?
>
>
> I stopped being lazy and did a bit more hacking around... With mmc debug
> enabled the following message appears in dmesg when I try to _remove_ card
> from the slot:
> mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
>
> Which brings us to the following dts fixup:
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> index b6b7a561df8c..a42fd79a62a3 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> @@ -71,7 +71,7 @@
> pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
>
> With this fix applied orange-pi-zero-plus2 boots fine.
Thanks, will investigate on this further and send the change to Linux.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 04/11] board: Add Pine64 support
[not found] ` <b8d92229-8f0c-2edf-7451-13ad2393eb4b@arm.com>
@ 2017-10-30 10:18 ` Jagan Teki
2017-10-30 10:29 ` Thomas Petazzoni
1 sibling, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-30 10:18 UTC (permalink / raw)
To: buildroot
On Mon, Oct 30, 2017 at 3:26 PM, Andre Przywara <andre.przywara@arm.com> wrote:
> Hi,
>
> On 26/10/17 19:11, Jagan Teki wrote:
>> Add initial support for Pine64 board with below features:
>> - U-Boot 2017.09
>> - Linux 4.13.7
>> - Default packages from buildroot
>>
>> Cc: TL Lim <tllim@pine64.org>
>> Cc: Andre Przywara <andre.przywara@arm.com>
>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>> ---
>> .gitlab-ci.yml | 1 +
>> DEVELOPERS | 2 ++
>> board/pine64/pine64/boot.cmd | 6 +++++
>> board/pine64/pine64/genimage.cfg | 38 ++++++++++++++++++++++++++++++++
>> board/pine64/pine64/readme.txt | 38 ++++++++++++++++++++++++++++++++
>> configs/pine64_defconfig | 47 ++++++++++++++++++++++++++++++++++++++++
>> 6 files changed, 132 insertions(+)
>> create mode 100644 board/pine64/pine64/boot.cmd
>> create mode 100644 board/pine64/pine64/genimage.cfg
>> create mode 100644 board/pine64/pine64/readme.txt
>> create mode 100644 configs/pine64_defconfig
>>
>> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
>> index 3dd4f48..44edc61 100644
>> --- a/.gitlab-ci.yml
>> +++ b/.gitlab-ci.yml
>> @@ -161,6 +161,7 @@ orangepi_zero_defconfig: *defconfig
>> pandaboard_defconfig: *defconfig
>> pc_x86_64_bios_defconfig: *defconfig
>> pc_x86_64_efi_defconfig: *defconfig
>> +pine64_defconfig: *defconfig
>> qemu_aarch64_virt_defconfig: *defconfig
>> qemu_arm_versatile_defconfig: *defconfig
>> qemu_arm_versatile_nommu_defconfig: *defconfig
>> diff --git a/DEVELOPERS b/DEVELOPERS
>> index 6521aad..780c674 100644
>> --- a/DEVELOPERS
>> +++ b/DEVELOPERS
>> @@ -728,8 +728,10 @@ F: package/keepalived/
>> N: Jagan Teki <jagan@amarulasolutions.com>
>> F: board/bananapi/
>> F: board/engicam/
>> +F: board/pine64/
>> F: configs/bananapi_m1_defconfig
>> F: configs/bananapi_m64_defconfig
>> +F: configs/pine64_defconfig
>> F: configs/engicam_imx6qdl_icore_defconfig
>> F: configs/engicam_imx6qdl_icore_qt5_defconfig
>> F: configs/engicam_imx6qdl_icore_rqs_defconfig
>> diff --git a/board/pine64/pine64/boot.cmd b/board/pine64/pine64/boot.cmd
>> new file mode 100644
>> index 0000000..14f5610
>> --- /dev/null
>> +++ b/board/pine64/pine64/boot.cmd
>> @@ -0,0 +1,6 @@
>> +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
>> +
>> +fatload mmc 0 $kernel_addr_r Image
>> +fatload mmc 0 $fdt_addr_r sun50i-a64-pine64.dtb
>> +
>> +booti $kernel_addr_r - $fdt_addr_r
>> diff --git a/board/pine64/pine64/genimage.cfg b/board/pine64/pine64/genimage.cfg
>> new file mode 100644
>> index 0000000..8e12308
>> --- /dev/null
>> +++ b/board/pine64/pine64/genimage.cfg
>> @@ -0,0 +1,38 @@
>> +image boot.vfat {
>> + vfat {
>> + files = {
>> + "Image",
>> + "sun50i-a64-pine64.dtb",
>> + "boot.scr"
>> + }
>> + }
>> + size = 64M
>> +}
>> +
>> +image sdcard.img {
>> + hdimage {
>> + }
>> +
>> + partition spl {
>> + in-partition-table = "no"
>> + image = "sunxi-spl.bin"
>> + offset = 8192
>> + }
>> +
>> + partition u-boot {
>> + in-partition-table = "no"
>> + image = "u-boot.itb"
>> + offset = 40K
>> + }
>> +
>> + partition boot {
>> + partition-type = 0xC
>> + bootable = "true"
>> + image = "boot.vfat"
>> + }
>> +
>> + partition rootfs {
>> + partition-type = 0x83
>> + image = "rootfs.ext4"
>> + }
>> +}
>> diff --git a/board/pine64/pine64/readme.txt b/board/pine64/pine64/readme.txt
>> new file mode 100644
>> index 0000000..54e6f9c
>> --- /dev/null
>> +++ b/board/pine64/pine64/readme.txt
>> @@ -0,0 +1,38 @@
>> +Intro
>> +=====
>> +
>> +This default configuration will allow you to start experimenting with the
>> +buildroot environment for the Pine64. With the current configuration
>> +it will bring-up the board, and allow access through the serial console.
>> +
>> +Pine64 link:
>> +https://www.pine64.org/?page_id=1194
>> +
>> +Wiki link:
>> +https://confluence.amarulasolutions.com/display/ODWIKI/Pine64
>> +
>> +This configuration uses U-Boot mainline and kernel mainline.
>> +
>> +How to build
>> +============
>> +
>> + $ make pine64_defconfig
>> +
>> + $ make
>> +
>> +Note: you will need access to the internet to download the required
>> +sources.
>> +
>> +How to write the SD card
>> +========================
>> +
>> +Once the build process is finished you will have an image called "sdcard.img"
>> +in the output/images/ directory.
>> +
>> +Copy the bootable "sdcard.img" onto an SD card with "dd":
>> +
>> + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
>> + $ sudo sync
>> +
>> +Insert the micro SDcard in your Pine64 and power it up. The console
>> +is on the serial line, 115200 8N1.
>> diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig
>> new file mode 100644
>> index 0000000..76d2d77
>> --- /dev/null
>> +++ b/configs/pine64_defconfig
>> @@ -0,0 +1,47 @@
>> +BR2_aarch64=y
>> +BR2_cortex_a53=y
>> +BR2_ARM_FPU_VFPV4=y
>> +
>> +# Linux headers same as kernel, a 4.13 series
>> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
>> +
>> +# Firmware
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
>
> So how stable shall this recipe be, in general? I see a lot of fixed
> versions (ATF, U-Boot, kernel) in here, which means it needs constant
> updating (to benefit from security fixes, for instance)?
> Is that intended? That looks a bit maintenance-heavy to me.
>
> And do you have to specify a certain commit ID here?
> I have some bugfixes on the "allwinner" branch, and am thinking about
> pulling the allwinner-stable branch to the same commit.
> So I strongly recommend to upgrade to the allwinner branch, which fixes
> immediate crashes on CPU off/onlining, among other issues.
I've used "allwinner" branch in first version set instead of commit,
but the Thomas opposed it. Is it possible to create tag for the stable
version? it would be good to use tag rather branch from maintenance
point-of-view.
thanks!
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 04/11] board: Add Pine64 support
[not found] ` <b8d92229-8f0c-2edf-7451-13ad2393eb4b@arm.com>
2017-10-30 10:18 ` Jagan Teki
@ 2017-10-30 10:29 ` Thomas Petazzoni
1 sibling, 0 replies; 20+ messages in thread
From: Thomas Petazzoni @ 2017-10-30 10:29 UTC (permalink / raw)
To: buildroot
Hello,
On Mon, 30 Oct 2017 09:56:04 +0000, Andre Przywara wrote:
> So how stable shall this recipe be, in general? I see a lot of fixed
> versions (ATF, U-Boot, kernel) in here, which means it needs constant
> updating (to benefit from security fixes, for instance)?
> Is that intended? That looks a bit maintenance-heavy to me.
>
> And do you have to specify a certain commit ID here?
> I have some bugfixes on the "allwinner" branch, and am thinking about
> pulling the allwinner-stable branch to the same commit.
> So I strongly recommend to upgrade to the allwinner branch, which fixes
> immediate crashes on CPU off/onlining, among other issues.
We do not want to use branch names, for two reasons:
1. A branch constantly changes, which means that the defconfig doesn't
build the same bootloader/kernel version for everyone. So while the
defconfig may work when it is submitted, it might stop to work later
on. Therefore, we want to use fixed versions.
2. When fetching from Git, Buildroot creates a local tarball named
"<package>-<version>.tar.gz". Once the tarball exists, Buildroot
doesn't fetch again from upstream. So, if you specify a branch name, a
tarball with this branch name is created once for all, and Buildroot
will never re-fetch from that location, unless you manually remove the
tarball from the download cache.
So, want Jagan does is what we ask to do for all defconfigs. Yes, it is
a bit heavy on maintenance, but that is the most reasonable trade-off
we have.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 05/11] board: Add SoPine support
2017-10-26 18:11 ` [Buildroot] [PATCH v4 05/11] board: Add SoPine support Jagan Teki
@ 2017-10-31 1:28 ` André Przywara
2017-10-31 6:51 ` Jagan Teki
0 siblings, 1 reply; 20+ messages in thread
From: André Przywara @ 2017-10-31 1:28 UTC (permalink / raw)
To: buildroot
On 26/10/17 19:11, Jagan Teki wrote:
> Add initial support for SoPine board with below features:
> - U-Boot 2017.09
> - Linux 4.13.7
> - Default packages from buildroot
....
> diff --git a/board/pine64/sopine/readme.txt b/board/pine64/sopine/readme.txt
> new file mode 100644
> index 0000000..05d26ee
> --- /dev/null
> +++ b/board/pine64/sopine/readme.txt
> @@ -0,0 +1,38 @@
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the SoPine. With the current configuration
> +it will bring-up the board, and allow access through the serial console.
> +
> +SoPINE link:
> +https://www.pine64.org/?page_id=1491
> +
> +Wiki link:
> +https://confluence.amarulasolutions.com/display/ODWIKI/Pine64+SoPine
Is that supposed to be externally accessible? The name doesn't resolve
for me. But even if, how stable is that link anyway?
I guess you want to point to the linux-sunxi.org Wiki instead.
Cheers,
Andre.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 05/11] board: Add SoPine support
2017-10-31 1:28 ` André Przywara
@ 2017-10-31 6:51 ` Jagan Teki
2017-10-31 6:55 ` Jagan Teki
0 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2017-10-31 6:51 UTC (permalink / raw)
To: buildroot
On Tue, Oct 31, 2017 at 6:58 AM, Andr? Przywara <andre.przywara@arm.com> wrote:
> On 26/10/17 19:11, Jagan Teki wrote:
>> Add initial support for SoPine board with below features:
>> - U-Boot 2017.09
>> - Linux 4.13.7
>> - Default packages from buildroot
>
> ....
>
>> diff --git a/board/pine64/sopine/readme.txt b/board/pine64/sopine/readme.txt
>> new file mode 100644
>> index 0000000..05d26ee
>> --- /dev/null
>> +++ b/board/pine64/sopine/readme.txt
>> @@ -0,0 +1,38 @@
>> +Intro
>> +=====
>> +
>> +This default configuration will allow you to start experimenting with the
>> +buildroot environment for the SoPine. With the current configuration
>> +it will bring-up the board, and allow access through the serial console.
>> +
>> +SoPINE link:
>> +https://www.pine64.org/?page_id=1491
>> +
>> +Wiki link:
>> +https://confluence.amarulasolutions.com/display/ODWIKI/Pine64+SoPine
>
> Is that supposed to be externally accessible? The name doesn't resolve
> for me. But even if, how stable is that link anyway?
> I guess you want to point to the linux-sunxi.org Wiki instead.
Yes, we're maintaining these as stable as possible, in fact the
content doesn't have redundant details with linux-sunxi.org and we
show only Mainline details which we supported and used the same in
buildroot. Even we link the linux-sunxi at the first point.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v4 05/11] board: Add SoPine support
2017-10-31 6:51 ` Jagan Teki
@ 2017-10-31 6:55 ` Jagan Teki
0 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2017-10-31 6:55 UTC (permalink / raw)
To: buildroot
On Tue, Oct 31, 2017 at 12:21 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> On Tue, Oct 31, 2017 at 6:58 AM, Andr? Przywara <andre.przywara@arm.com> wrote:
>> On 26/10/17 19:11, Jagan Teki wrote:
>>> Add initial support for SoPine board with below features:
>>> - U-Boot 2017.09
>>> - Linux 4.13.7
>>> - Default packages from buildroot
>>
>> ....
>>
>>> diff --git a/board/pine64/sopine/readme.txt b/board/pine64/sopine/readme.txt
>>> new file mode 100644
>>> index 0000000..05d26ee
>>> --- /dev/null
>>> +++ b/board/pine64/sopine/readme.txt
>>> @@ -0,0 +1,38 @@
>>> +Intro
>>> +=====
>>> +
>>> +This default configuration will allow you to start experimenting with the
>>> +buildroot environment for the SoPine. With the current configuration
>>> +it will bring-up the board, and allow access through the serial console.
>>> +
>>> +SoPINE link:
>>> +https://www.pine64.org/?page_id=1491
>>> +
>>> +Wiki link:
>>> +https://confluence.amarulasolutions.com/display/ODWIKI/Pine64+SoPine
OK, I need to correct this, [1] is accessible.
[1] https://openedev.amarulasolutions.com/display/ODWIKI/Pine64+SoPine
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2017-10-31 6:55 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-26 18:11 [Buildroot] [PATCH v4 00/11] board: Add Allwinner A64/H5 boards Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 01/11] arm-trusted-firmware: Build FIP for BL33 Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 02/11] uboot: Add U-Boot-bundles-ATF support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 03/11] board: Add Bananapi M64 support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 04/11] board: Add Pine64 support Jagan Teki
[not found] ` <b8d92229-8f0c-2edf-7451-13ad2393eb4b@arm.com>
2017-10-30 10:18 ` Jagan Teki
2017-10-30 10:29 ` Thomas Petazzoni
2017-10-26 18:11 ` [Buildroot] [PATCH v4 05/11] board: Add SoPine support Jagan Teki
2017-10-31 1:28 ` André Przywara
2017-10-31 6:51 ` Jagan Teki
2017-10-31 6:55 ` Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 06/11] board: Add FriendlyARM Nanopi A64 support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 07/11] board: Add FriendlyARM Nanopi NEO2 support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 08/11] board: Add Olimex A64-OLinuXino support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 09/11] board: Add Orangepi Win/Win Plus support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 10/11] board: Add Orangepi Prime support Jagan Teki
2017-10-26 18:11 ` [Buildroot] [PATCH v4 11/11] board: Add Orangepi Zero Plus2 support Jagan Teki
2017-10-29 21:07 ` Sergey Matyukevich
2017-10-29 21:32 ` Sergey Matyukevich
2017-10-30 7:19 ` Jagan Teki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.