Building xen image on yocto

Building xen image on yocto

[Pello Heriz]

[-- Attachment #1: Type: text/plain, Size: 166 bytes --]

Hi,

I have read that I need to include "xen" in the DISTRO_FEATURES variable,
is this necessary at all? If it is, where can I add this to my project?

Thanks,

[-- Attachment #2: Type: text/html, Size: 240 bytes --]

Re: Building xen image on yocto

[Doug Goldstein]

[-- Attachment #1.1: Type: text/plain, Size: 642 bytes --]

On 3/6/17 4:23 AM, Pello Heriz wrote:
> Hi,
> 
> I have read that I need to include "xen" in the DISTRO_FEATURES
> variable, is this necessary at all? If it is, where can I add this to my
> project?
> 
> Thanks,
> 
> 

So that's a pretty fundamental question when working with Yocto. I would
recommend reading through the Quick Start Guide [1] and then refer to
the Reference Manual [2] for more info about DISTRO_FEATURES.

[1]
http://www.yoctoproject.org/docs/2.2.1/yocto-project-qs/yocto-project-qs.html
[2]
https://www.yoctoproject.org/docs/2.2.1/ref-manual/ref-manual.html#ref-features-distro

-- 
Doug Goldstein


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 978 bytes --]

Re: Building xen image on yocto

[Doug Goldstein]

[-- Attachment #1.1: Type: text/plain, Size: 790 bytes --]

On 3/6/17 3:28 AM, Pello Heriz wrote:
> Hi all,
> 
> is it necessary to add meta-petalinux layer to build a xen image for
> zcu102 board using Yocto?
> 
> I have read this information in the next link: 
> http://www.wiki.xilinx.com/Xen+Hypervisor+through+Yocto+Flow
> 
> The think is that if I include this layer to my project, when I try
> bitbake, I get the next result:
> 
> Txertatutako irudia 1
> 
> What I have to do in order to solve the issue?
> 
> Thanks,
> Pello
> 
>  
> 
> 

I wouldn't use meta-petalinux for the target you are trying to build
for. I am fairly certain that patches for the zcu102 with Xen have not
been upstreamed into meta-virtualization. Patches are certainly welcome
(as is hardware that I can test with).

-- 
Doug Goldstein


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 978 bytes --]

Building xen image on yocto

[Pello Heriz]

[-- Attachment #1.1: Type: text/plain, Size: 426 bytes --]

Hi all,

is it necessary to add meta-petalinux layer to build a xen image for zcu102
board using Yocto?

I have read this information in the next link:
http://www.wiki.xilinx.com/Xen+Hypervisor+through+Yocto+Flow

The think is that if I include this layer to my project, when I try
bitbake, I get the next result:

[image: Txertatutako irudia 1]

What I have to do in order to solve the issue?

Thanks,
Pello

[-- Attachment #1.2: Type: text/html, Size: 761 bytes --]

[-- Attachment #2: image.png --]
[-- Type: image/png, Size: 21228 bytes --]