From: Kevin Tang <kevin3.tang@gmail.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
pony1.wu@gmail.com, Orson Zhai <orsonzhai@gmail.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
"Linux-Kernel@Vger. Kernel. Org" <linux-kernel@vger.kernel.org>,
ML dri-devel <dri-devel@lists.freedesktop.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v6 4/6] drm/sprd: add Unisoc's drm display controller driver
Date: Sun, 26 Sep 2021 21:44:01 +0800 [thread overview]
Message-ID: <CAFPSGXbLb3sjdtCa9zC7N37WHHU1WjhS6V=+kJC7Kt+wPSNqwQ@mail.gmail.com> (raw)
In-Reply-To: <20210917145818.znqcgwii5s6b6a2n@gilmour>
Maxime Ripard <maxime@cerno.tech> 于2021年9月17日周五 下午10:58写道：
>
> Hi,
>
> On Fri, Aug 13, 2021 at 10:53:00PM +0800, Kevin Tang wrote:
> > Adds DPU(Display Processor Unit) support for the Unisoc's display
> > subsystem.
> > It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
> >
> > v2:
> > - Use drm_xxx to replace all DRM_XXX.
> > - Use kzalloc to replace devm_kzalloc for sprd_dpu structure init.
> >
> > v3:
> > - Remove dpu_layer stuff layer and commit layers by aotmic_update
> >
> > v4:
> > - Use drmm_helpers to allocate crtc and planes.
> > - Move rotation enum definitions to crtc layer reg bitfields.
> > - Move allocate crtc and planes to bind function.
> >
> > v5:
> > - Fix the checkpatch warnings.
> > - Use mode_set_nofb instead of mode_valid callback.
> > - Follow the OF-Graph bindings, use of_graph_get_port_by_id
> > instead of of_parse_phandle.
> > - Use zpos to represent the layer position.
> > - Rebase to last drm misc branch.
> >
> > v6:
> > - Disable and clear interrupts before register dpu IRQ
> > - Init dpi config used by crtc_state->adjusted_mode on mode_set_nofb
> > - Remove enable_irq and disable_irq function call.
> > - Remove drm_format_info function call.
> >
> > Cc: Orson Zhai <orsonzhai@gmail.com>
> > Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> > Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
> > ---
> > drivers/gpu/drm/sprd/Kconfig | 1 +
> > drivers/gpu/drm/sprd/Makefile | 3 +-
> > drivers/gpu/drm/sprd/sprd_dpu.c | 937 ++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/sprd/sprd_dpu.h | 109 ++++
> > drivers/gpu/drm/sprd/sprd_drm.c | 1 +
> > drivers/gpu/drm/sprd/sprd_drm.h | 2 +
> > 6 files changed, 1052 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c
> > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h
> >
> > diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig
> > index 726c3e76d..37762c333 100644
> > --- a/drivers/gpu/drm/sprd/Kconfig
> > +++ b/drivers/gpu/drm/sprd/Kconfig
> > @@ -5,6 +5,7 @@ config DRM_SPRD
> > select DRM_GEM_CMA_HELPER
> > select DRM_KMS_CMA_HELPER
> > select DRM_KMS_HELPER
> > + select VIDEOMODE_HELPERS
> > help
> > Choose this option if you have a Unisoc chipset.
> > If M is selected the module will be called sprd_drm.
> > diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
> > index 9850f00b8..ab12b95e6 100644
> > --- a/drivers/gpu/drm/sprd/Makefile
> > +++ b/drivers/gpu/drm/sprd/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0
> >
> > -obj-y := sprd_drm.o
> > +obj-y := sprd_drm.o \
> > + sprd_dpu.o
> > diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c
> > new file mode 100644
> > index 000000000..448dd4fb6
> > --- /dev/null
> > +++ b/drivers/gpu/drm/sprd/sprd_dpu.c
> > @@ -0,0 +1,937 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2020 Unisoc Inc.
> > + */
> > +
> > +#include <linux/component.h>
> > +#include <linux/delay.h>
> > +#include <linux/dma-buf.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/wait.h>
> > +#include <linux/workqueue.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_fb_cma_helper.h>
> > +#include <drm/drm_gem_cma_helper.h>
> > +#include <drm/drm_gem_framebuffer_helper.h>
> > +#include <drm/drm_plane_helper.h>
> > +
> > +#include "sprd_drm.h"
> > +#include "sprd_dpu.h"
> > +
> > +/* Global control registers */
> > +#define REG_DPU_CTRL 0x04
> > +#define REG_DPU_CFG0 0x08
> > +#define REG_PANEL_SIZE 0x20
> > +#define REG_BLEND_SIZE 0x24
> > +#define REG_BG_COLOR 0x2C
> > +
> > +/* Layer0 control registers */
> > +#define REG_LAY_BASE_ADDR0 0x30
> > +#define REG_LAY_BASE_ADDR1 0x34
> > +#define REG_LAY_BASE_ADDR2 0x38
> > +#define REG_LAY_CTRL 0x40
> > +#define REG_LAY_SIZE 0x44
> > +#define REG_LAY_PITCH 0x48
> > +#define REG_LAY_POS 0x4C
> > +#define REG_LAY_ALPHA 0x50
> > +#define REG_LAY_CROP_START 0x5C
> > +
> > +/* Interrupt control registers */
> > +#define REG_DPU_INT_EN 0x1E0
> > +#define REG_DPU_INT_CLR 0x1E4
> > +#define REG_DPU_INT_STS 0x1E8
> > +
> > +/* DPI control registers */
> > +#define REG_DPI_CTRL 0x1F0
> > +#define REG_DPI_H_TIMING 0x1F4
> > +#define REG_DPI_V_TIMING 0x1F8
> > +
> > +/* MMU control registers */
> > +#define REG_MMU_EN 0x800
> > +#define REG_MMU_VPN_RANGE 0x80C
> > +#define REG_MMU_VAOR_ADDR_RD 0x818
> > +#define REG_MMU_VAOR_ADDR_WR 0x81C
> > +#define REG_MMU_INV_ADDR_RD 0x820
> > +#define REG_MMU_INV_ADDR_WR 0x824
> > +#define REG_MMU_PPN1 0x83C
> > +#define REG_MMU_RANGE1 0x840
> > +#define REG_MMU_PPN2 0x844
> > +#define REG_MMU_RANGE2 0x848
> > +
> > +/* Global control bits */
> > +#define BIT_DPU_RUN BIT(0)
> > +#define BIT_DPU_STOP BIT(1)
> > +#define BIT_DPU_REG_UPDATE BIT(2)
> > +#define BIT_DPU_IF_EDPI BIT(0)
> > +
> > +/* Layer control bits */
> > +#define BIT_DPU_LAY_EN BIT(0)
> > +#define BIT_DPU_LAY_LAYER_ALPHA (0x01 << 2)
> > +#define BIT_DPU_LAY_COMBO_ALPHA (0x02 << 2)
> > +#define BIT_DPU_LAY_FORMAT_YUV422_2PLANE (0x00 << 4)
> > +#define BIT_DPU_LAY_FORMAT_YUV420_2PLANE (0x01 << 4)
> > +#define BIT_DPU_LAY_FORMAT_YUV420_3PLANE (0x02 << 4)
> > +#define BIT_DPU_LAY_FORMAT_ARGB8888 (0x03 << 4)
> > +#define BIT_DPU_LAY_FORMAT_RGB565 (0x04 << 4)
> > +#define BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3 (0x00 << 8)
> > +#define BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0 (0x01 << 8)
> > +#define BIT_DPU_LAY_NO_SWITCH (0x00 << 10)
> > +#define BIT_DPU_LAY_RB_OR_UV_SWITCH (0x01 << 10)
> > +#define BIT_DPU_LAY_MODE_BLEND_NORMAL (0x00 << 16)
> > +#define BIT_DPU_LAY_MODE_BLEND_PREMULT (0x01 << 16)
> > +#define BIT_DPU_LAY_ROTATION_0 (0x00 << 20)
> > +#define BIT_DPU_LAY_ROTATION_90 (0x01 << 20)
> > +#define BIT_DPU_LAY_ROTATION_180 (0x02 << 20)
> > +#define BIT_DPU_LAY_ROTATION_270 (0x03 << 20)
> > +#define BIT_DPU_LAY_ROTATION_0_M (0x04 << 20)
> > +#define BIT_DPU_LAY_ROTATION_90_M (0x05 << 20)
> > +#define BIT_DPU_LAY_ROTATION_180_M (0x06 << 20)
> > +#define BIT_DPU_LAY_ROTATION_270_M (0x07 << 20)
> > +
> > +/* Interrupt control & status bits */
> > +#define BIT_DPU_INT_DONE BIT(0)
> > +#define BIT_DPU_INT_TE BIT(1)
> > +#define BIT_DPU_INT_ERR BIT(2)
> > +#define BIT_DPU_INT_UPDATE_DONE BIT(4)
> > +#define BIT_DPU_INT_VSYNC BIT(5)
> > +#define BIT_DPU_INT_MMU_VAOR_RD BIT(16)
> > +#define BIT_DPU_INT_MMU_VAOR_WR BIT(17)
> > +#define BIT_DPU_INT_MMU_INV_RD BIT(18)
> > +#define BIT_DPU_INT_MMU_INV_WR BIT(19)
> > +
> > +/* DPI control bits */
> > +#define BIT_DPU_EDPI_TE_EN BIT(8)
> > +#define BIT_DPU_EDPI_FROM_EXTERNAL_PAD BIT(10)
> > +#define BIT_DPU_DPI_HALT_EN BIT(16)
> > +
> > +static const u32 layer_fmts[] = {
> > + DRM_FORMAT_XRGB8888,
> > + DRM_FORMAT_XBGR8888,
> > + DRM_FORMAT_ARGB8888,
> > + DRM_FORMAT_ABGR8888,
> > + DRM_FORMAT_RGBA8888,
> > + DRM_FORMAT_BGRA8888,
> > + DRM_FORMAT_RGBX8888,
> > + DRM_FORMAT_RGB565,
> > + DRM_FORMAT_BGR565,
> > + DRM_FORMAT_NV12,
> > + DRM_FORMAT_NV21,
> > + DRM_FORMAT_NV16,
> > + DRM_FORMAT_NV61,
> > + DRM_FORMAT_YUV420,
> > + DRM_FORMAT_YVU420,
> > +};
> > +
> > +struct sprd_plane {
> > + struct drm_plane base;
> > +};
> > +
> > +static u32 check_mmu_isr(struct sprd_dpu *dpu, u32 reg_val)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + u32 mmu_mask = BIT_DPU_INT_MMU_VAOR_RD |
> > + BIT_DPU_INT_MMU_VAOR_WR |
> > + BIT_DPU_INT_MMU_INV_RD |
> > + BIT_DPU_INT_MMU_INV_WR;
> > + u32 val = reg_val & mmu_mask;
> > + int i;
> > +
> > + if (val) {
> > + drm_err(dpu->drm, "--- iommu interrupt err: 0x%04x ---\n", val);
> > +
> > + if (val & BIT_DPU_INT_MMU_INV_RD)
> > + drm_err(dpu->drm, "iommu invalid read error, addr: 0x%08x\n",
> > + readl(ctx->base + REG_MMU_INV_ADDR_RD));
> > + if (val & BIT_DPU_INT_MMU_INV_WR)
> > + drm_err(dpu->drm, "iommu invalid write error, addr: 0x%08x\n",
> > + readl(ctx->base + REG_MMU_INV_ADDR_WR));
> > + if (val & BIT_DPU_INT_MMU_VAOR_RD)
> > + drm_err(dpu->drm, "iommu va out of range read error, addr: 0x%08x\n",
> > + readl(ctx->base + REG_MMU_VAOR_ADDR_RD));
> > + if (val & BIT_DPU_INT_MMU_VAOR_WR)
> > + drm_err(dpu->drm, "iommu va out of range write error, addr: 0x%08x\n",
> > + readl(ctx->base + REG_MMU_VAOR_ADDR_WR));
> > +
> > + for (i = 0; i < 8; i++) {
> > + reg_val = layer_reg_rd(ctx, REG_LAY_CTRL, i);
> > + if (reg_val & 0x1)
> > + drm_info(dpu->drm, "layer%d: 0x%x 0x%x 0x%x ctrl: 0x%x\n", i,
> > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR0, i),
> > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR1, i),
> > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR2, i),
> > + layer_reg_rd(ctx, REG_LAY_CTRL, i));
> > + }
> > + }
> > +
> > + return val;
> > +}
>
> We'll still want an Acked-by from one of the IOMMU maintainers. Last
> time they commented they were against that.
>
> > +static int dpu_wait_stop_done(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + int rc;
> > +
> > + if (ctx->stopped)
> > + return 0;
> > +
> > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_stop,
> > + msecs_to_jiffies(500));
> > + ctx->evt_stop = false;
> > +
> > + ctx->stopped = true;
> > +
> > + if (!rc) {
> > + drm_err(dpu->drm, "dpu wait for stop done time out!\n");
> > + return -ETIMEDOUT;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dpu_wait_update_done(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + int rc;
> > +
> > + ctx->evt_update = false;
> > +
> > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_update,
> > + msecs_to_jiffies(500));
> > +
> > + if (!rc) {
> > + drm_err(dpu->drm, "dpu wait for reg update done time out!\n");
> > + return -ETIMEDOUT;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static u32 drm_format_to_dpu(struct drm_framebuffer *fb)
> > +{
> > + u32 format = 0;
> > +
> > + switch (fb->format->format) {
> > + case DRM_FORMAT_BGRA8888:
> > + /* BGRA8888 -> ARGB8888 */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0;
> > + format |= BIT_DPU_LAY_FORMAT_ARGB8888;
> > + break;
> > + case DRM_FORMAT_RGBX8888:
> > + case DRM_FORMAT_RGBA8888:
> > + /* RGBA8888 -> ABGR8888 */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0;
> > + fallthrough;
> > + case DRM_FORMAT_ABGR8888:
> > + /* RB switch */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + fallthrough;
> > + case DRM_FORMAT_ARGB8888:
> > + format |= BIT_DPU_LAY_FORMAT_ARGB8888;
> > + break;
> > + case DRM_FORMAT_XBGR8888:
> > + /* RB switch */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + fallthrough;
> > + case DRM_FORMAT_XRGB8888:
> > + format |= BIT_DPU_LAY_FORMAT_ARGB8888;
> > + break;
> > + case DRM_FORMAT_BGR565:
> > + /* RB switch */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + fallthrough;
> > + case DRM_FORMAT_RGB565:
> > + format |= BIT_DPU_LAY_FORMAT_RGB565;
> > + break;
> > + case DRM_FORMAT_NV12:
> > + /* 2-Lane: Yuv420 */
> > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_NO_SWITCH;
> > + break;
> > + case DRM_FORMAT_NV21:
> > + /* 2-Lane: Yuv420 */
> > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + break;
> > + case DRM_FORMAT_NV16:
> > + /* 2-Lane: Yuv422 */
> > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + break;
> > + case DRM_FORMAT_NV61:
> > + /* 2-Lane: Yuv422 */
> > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_NO_SWITCH;
> > + break;
> > + case DRM_FORMAT_YUV420:
> > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_NO_SWITCH;
> > + break;
> > + case DRM_FORMAT_YVU420:
> > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE;
> > + /* Y endian */
> > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3;
> > + /* UV endian */
> > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH;
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + return format;
> > +}
> > +
> > +static u32 drm_rotation_to_dpu(struct drm_plane_state *state)
> > +{
> > + u32 rotation = 0;
> > +
> > + switch (state->rotation) {
> > + default:
> > + case DRM_MODE_ROTATE_0:
> > + rotation = BIT_DPU_LAY_ROTATION_0;
> > + break;
> > + case DRM_MODE_ROTATE_90:
> > + rotation = BIT_DPU_LAY_ROTATION_90;
> > + break;
> > + case DRM_MODE_ROTATE_180:
> > + rotation = BIT_DPU_LAY_ROTATION_180;
> > + break;
> > + case DRM_MODE_ROTATE_270:
> > + rotation = BIT_DPU_LAY_ROTATION_270;
> > + break;
> > + case DRM_MODE_REFLECT_Y:
> > + rotation = BIT_DPU_LAY_ROTATION_180_M;
> > + break;
> > + case (DRM_MODE_REFLECT_Y | DRM_MODE_ROTATE_90):
> > + rotation = BIT_DPU_LAY_ROTATION_90_M;
> > + break;
> > + case DRM_MODE_REFLECT_X:
> > + rotation = BIT_DPU_LAY_ROTATION_0_M;
> > + break;
> > + case (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90):
> > + rotation = BIT_DPU_LAY_ROTATION_270_M;
> > + break;
> > + }
> > +
> > + return rotation;
> > +}
> > +
> > +static u32 drm_blend_to_dpu(struct drm_plane_state *state)
> > +{
> > + u32 blend = 0;
> > +
> > + switch (state->pixel_blend_mode) {
> > + case DRM_MODE_BLEND_COVERAGE:
> > + /* alpha mode select - combo alpha */
> > + blend |= BIT_DPU_LAY_COMBO_ALPHA;
> > + /* Normal mode */
> > + blend |= BIT_DPU_LAY_MODE_BLEND_NORMAL;
> > + break;
> > + case DRM_MODE_BLEND_PREMULTI:
> > + /* alpha mode select - combo alpha */
> > + blend |= BIT_DPU_LAY_COMBO_ALPHA;
> > + /* Pre-mult mode */
> > + blend |= BIT_DPU_LAY_MODE_BLEND_PREMULT;
> > + break;
> > + case DRM_MODE_BLEND_PIXEL_NONE:
> > + default:
> > + /* don't do blending, maybe RGBX */
> > + /* alpha mode select - layer alpha */
> > + blend |= BIT_DPU_LAY_LAYER_ALPHA;
> > + break;
> > + }
> > +
> > + return blend;
> > +}
> > +
> > +static void sprd_dpu_layer(struct sprd_dpu *dpu, struct drm_plane_state *state)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + struct drm_gem_cma_object *cma_obj;
> > + struct drm_framebuffer *fb = state->fb;
> > + u32 addr, size, offset, pitch, blend, format, rotation;
> > + u32 src_x = state->src_x >> 16;
> > + u32 src_y = state->src_y >> 16;
> > + u32 src_w = state->src_w >> 16;
> > + u32 src_h = state->src_h >> 16;
> > + u32 dst_x = state->crtc_x;
> > + u32 dst_y = state->crtc_y;
> > + u32 alpha = state->alpha;
> > + u32 index = state->zpos;
> > + int i;
> > +
> > + offset = (dst_x & 0xffff) | (dst_y << 16);
> > + size = (src_w & 0xffff) | (src_h << 16);
> > +
> > + for (i = 0; i < fb->format->num_planes; i++) {
> > + cma_obj = drm_fb_cma_get_gem_obj(fb, i);
> > + addr = cma_obj->paddr + fb->offsets[i];
> > +
> > + if (i == 0)
> > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR0, addr, index);
> > + else if (i == 1)
> > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR1, addr, index);
> > + else
> > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR2, addr, index);
> > + }
> > +
> > + if (fb->format->num_planes == 3) {
> > + /* UV pitch is 1/2 of Y pitch */
> > + pitch = (fb->pitches[0] / fb->format->cpp[0]) |
> > + (fb->pitches[0] / fb->format->cpp[0] << 15);
> > + } else {
> > + pitch = fb->pitches[0] / fb->format->cpp[0];
> > + }
> > +
> > + layer_reg_wr(ctx, REG_LAY_POS, offset, index);
> > + layer_reg_wr(ctx, REG_LAY_SIZE, size, index);
> > + layer_reg_wr(ctx, REG_LAY_CROP_START,
> > + src_y << 16 | src_x, index);
> > + layer_reg_wr(ctx, REG_LAY_ALPHA, alpha, index);
> > + layer_reg_wr(ctx, REG_LAY_PITCH, pitch, index);
> > +
> > + format = drm_format_to_dpu(fb);
> > + blend = drm_blend_to_dpu(state);
> > + rotation = drm_rotation_to_dpu(state);
> > +
> > + layer_reg_wr(ctx, REG_LAY_CTRL, BIT_DPU_LAY_EN |
> > + format |
> > + blend |
> > + rotation,
> > + index);
> > +}
> > +
> > +static void sprd_dpu_flip(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + u32 reg_val;
> > +
> > + /*
> > + * Make sure the dpu is in stop status. DPU has no shadow
> > + * registers in EDPI mode. So the config registers can only be
> > + * updated in the rising edge of DPU_RUN bit.
> > + */
> > + if (ctx->if_type == SPRD_DPU_IF_EDPI)
> > + dpu_wait_stop_done(dpu);
> > +
> > + /* update trigger and wait */
> > + if (ctx->if_type == SPRD_DPU_IF_DPI) {
> > + if (!ctx->stopped) {
> > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_REG_UPDATE);
> > + dpu_wait_update_done(dpu);
> > + }
> > +
> > + dpu_reg_set(ctx, REG_DPU_INT_EN, BIT_DPU_INT_ERR);
> > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) {
> > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN);
> > +
> > + ctx->stopped = false;
> > + }
> > +
> > + /*
> > + * If the following interrupt was disabled in isr,
> > + * re-enable it.
> > + */
> > + reg_val = BIT_DPU_INT_MMU_VAOR_RD |
> > + BIT_DPU_INT_MMU_VAOR_WR |
> > + BIT_DPU_INT_MMU_INV_RD |
> > + BIT_DPU_INT_MMU_INV_WR;
> > + dpu_reg_set(ctx, REG_DPU_INT_EN, reg_val);
> > +}
> > +
> > +static void sprd_dpu_init(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + u32 int_mask = 0;
> > +
> > + writel(0x00, ctx->base + REG_BG_COLOR);
> > + writel(0x00, ctx->base + REG_MMU_EN);
> > + writel(0x00, ctx->base + REG_MMU_PPN1);
> > + writel(0xffff, ctx->base + REG_MMU_RANGE1);
> > + writel(0x00, ctx->base + REG_MMU_PPN2);
> > + writel(0xffff, ctx->base + REG_MMU_RANGE2);
> > + writel(0x1ffff, ctx->base + REG_MMU_VPN_RANGE);
> > +
> > + if (ctx->if_type == SPRD_DPU_IF_DPI) {
> > + /* use dpi as interface */
> > + dpu_reg_clr(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI);
> > + /* disable Halt function for SPRD DSI */
> > + dpu_reg_clr(ctx, REG_DPI_CTRL, BIT_DPU_DPI_HALT_EN);
> > + /* select te from external pad */
> > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD);
> > +
> > + /* enable dpu update done INT */
> > + int_mask |= BIT_DPU_INT_UPDATE_DONE;
> > + /* enable dpu done INT */
> > + int_mask |= BIT_DPU_INT_DONE;
> > + /* enable dpu dpi vsync */
> > + int_mask |= BIT_DPU_INT_VSYNC;
> > + /* enable dpu TE INT */
> > + int_mask |= BIT_DPU_INT_TE;
> > + /* enable underflow err INT */
> > + int_mask |= BIT_DPU_INT_ERR;
> > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) {
> > + /* use edpi as interface */
> > + dpu_reg_set(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI);
> > + /* use external te */
> > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD);
> > + /* enable te */
> > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_TE_EN);
> > +
> > + /* enable stop done INT */
> > + int_mask |= BIT_DPU_INT_DONE;
> > + /* enable TE INT */
> > + int_mask |= BIT_DPU_INT_TE;
> > + }
> > +
> > + /* enable iommu va out of range read error INT */
> > + int_mask |= BIT_DPU_INT_MMU_VAOR_RD;
> > + /* enable iommu va out of range write error INT */
> > + int_mask |= BIT_DPU_INT_MMU_VAOR_WR;
> > + /* enable iommu invalid read error INT */
> > + int_mask |= BIT_DPU_INT_MMU_INV_RD;
> > + /* enable iommu invalid write error INT */
> > + int_mask |= BIT_DPU_INT_MMU_INV_WR;
> > +
> > + writel(int_mask, ctx->base + REG_DPU_INT_EN);
> > +}
> > +
> > +static void sprd_dpu_fini(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > +
> > + writel(0x00, ctx->base + REG_DPU_INT_EN);
> > + writel(0xff, ctx->base + REG_DPU_INT_CLR);
> > +}
> > +
> > +static void sprd_dpi_init(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > + u32 reg_val;
> > + u32 size;
> > +
> > + size = (ctx->vm.vactive << 16) | ctx->vm.hactive;
> > + writel(size, ctx->base + REG_PANEL_SIZE);
> > + writel(size, ctx->base + REG_BLEND_SIZE);
> > +
> > + if (ctx->if_type == SPRD_DPU_IF_DPI) {
> > + /* set dpi timing */
> > + reg_val = ctx->vm.hsync_len << 0 |
> > + ctx->vm.hback_porch << 8 |
> > + ctx->vm.hfront_porch << 20;
> > + writel(reg_val, ctx->base + REG_DPI_H_TIMING);
> > +
> > + reg_val = ctx->vm.vsync_len << 0 |
> > + ctx->vm.vback_porch << 8 |
> > + ctx->vm.vfront_porch << 20;
> > + writel(reg_val, ctx->base + REG_DPI_V_TIMING);
> > + }
> > +}
> > +
> > +void sprd_dpu_run(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > +
> > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN);
> > +
> > + ctx->stopped = false;
> > +}
> > +
> > +void sprd_dpu_stop(struct sprd_dpu *dpu)
> > +{
> > + struct dpu_context *ctx = &dpu->ctx;
> > +
> > + if (ctx->if_type == SPRD_DPU_IF_DPI)
> > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_STOP);
> > +
> > + dpu_wait_stop_done(dpu);
> > +}
> > +
> > +static int sprd_plane_atomic_check(struct drm_plane *plane,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state,
> > + plane);
> > + struct drm_crtc_state *crtc_state;
> > + u32 fmt;
> > +
> > + if (!plane_state->fb || !plane_state->crtc)
> > + return 0;
> > +
> > + fmt = drm_format_to_dpu(plane_state->fb);
> > + if (!fmt)
> > + return -EINVAL;
> > +
> > + crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc);
> > + if (IS_ERR(crtc_state))
> > + return PTR_ERR(crtc_state);
> > +
> > + return drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> > + DRM_PLANE_HELPER_NO_SCALING,
> > + DRM_PLANE_HELPER_NO_SCALING,
> > + true, true);
> > +}
> > +
> > +static void sprd_plane_atomic_update(struct drm_plane *drm_plane,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
> > + drm_plane);
> > + struct sprd_dpu *dpu = to_sprd_crtc(new_state->crtc);
> > +
> > + /* start configure dpu layers */
> > + sprd_dpu_layer(dpu, new_state);
> > +}
> > +
> > +static void sprd_plane_atomic_disable(struct drm_plane *drm_plane,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
> > + drm_plane);
> > + struct sprd_dpu *dpu = to_sprd_crtc(old_state->crtc);
> > +
> > + layer_reg_wr(&dpu->ctx, REG_LAY_CTRL, 0x00, old_state->zpos);
> > +}
> > +
> > +static void sprd_plane_create_properties(struct sprd_plane *plane, int index)
> > +{
> > + unsigned int supported_modes = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> > + BIT(DRM_MODE_BLEND_PREMULTI) |
> > + BIT(DRM_MODE_BLEND_COVERAGE);
> > +
> > + /* create rotation property */
> > + drm_plane_create_rotation_property(&plane->base,
> > + DRM_MODE_ROTATE_0,
> > + DRM_MODE_ROTATE_MASK |
> > + DRM_MODE_REFLECT_MASK);
> > +
> > + /* create alpha property */
> > + drm_plane_create_alpha_property(&plane->base);
> > +
> > + /* create blend mode property */
> > + drm_plane_create_blend_mode_property(&plane->base, supported_modes);
> > +
> > + /* create zpos property */
> > + drm_plane_create_zpos_immutable_property(&plane->base, index);
> > +}
> > +
> > +static const struct drm_plane_helper_funcs sprd_plane_helper_funcs = {
> > + .atomic_check = sprd_plane_atomic_check,
> > + .atomic_update = sprd_plane_atomic_update,
> > + .atomic_disable = sprd_plane_atomic_disable,
> > +};
> > +
> > +static const struct drm_plane_funcs sprd_plane_funcs = {
> > + .update_plane = drm_atomic_helper_update_plane,
> > + .disable_plane = drm_atomic_helper_disable_plane,
> > + .destroy = drm_plane_cleanup,
> > + .reset = drm_atomic_helper_plane_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> > +};
> > +
> > +static struct sprd_plane *sprd_planes_init(struct drm_device *drm)
> > +{
> > + struct sprd_plane *plane, *primary;
> > + enum drm_plane_type plane_type;
> > + int i;
> > +
> > + for (i = 0; i < 6; i++) {
> > + plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
> > + DRM_PLANE_TYPE_OVERLAY;
> > +
> > + plane = drmm_universal_plane_alloc(drm, struct sprd_plane, base,
> > + 1, &sprd_plane_funcs,
> > + layer_fmts, ARRAY_SIZE(layer_fmts),
> > + NULL, plane_type, NULL);
> > + if (IS_ERR(plane)) {
> > + drm_err(drm, "failed to init drm plane: %d\n", i);
> > + return plane;
> > + }
> > +
> > + drm_plane_helper_add(&plane->base, &sprd_plane_helper_funcs);
> > +
> > + sprd_plane_create_properties(plane, i);
> > +
> > + if (i == 0)
> > + primary = plane;
> > + }
> > +
> > + return primary;
> > +}
> > +
> > +static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc)
> > +{
> > + struct sprd_dpu *dpu = to_sprd_crtc(crtc);
> > + struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> > +
> > + drm_display_mode_to_videomode(mode, &dpu->ctx.vm);
>
> You don't need to store the videomode into you dpu structure, just pass
> adjusted_mode to sprd_dpi_init.
I get it, thks.
>
> > + sprd_dpi_init(dpu);
> > +}
> > +
> > +static void sprd_crtc_atomic_enable(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct sprd_dpu *dpu = to_sprd_crtc(crtc);
> > +
> > + sprd_dpu_init(dpu);
>
> Do you need to do it on both mode_set_nofb and atomic_enable?
mode_set_nofb is sprd_dpi_init, but atomic_enable is sprd_dpu_init,
not the same interface.
>
> Maxime
next prev parent reply other threads:[~2021-09-26 13:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-13 14:52 [PATCH v6 0/6] Add Unisoc's drm kms module Kevin Tang
2021-08-13 14:52 ` [PATCH v6 1/6] dt-bindings: display: add Unisoc's drm master bindings Kevin Tang
2021-08-13 14:52 ` [PATCH v6 2/6] drm/sprd: add Unisoc's drm kms master Kevin Tang
2021-08-13 14:52 ` [PATCH v6 3/6] dt-bindings: display: add Unisoc's dpu bindings Kevin Tang
2021-08-13 14:53 ` [PATCH v6 4/6] drm/sprd: add Unisoc's drm display controller driver Kevin Tang
2021-09-17 14:58 ` Maxime Ripard
2021-09-26 13:44 ` Kevin Tang [this message]
2021-09-26 13:44 ` Kevin Tang
2021-08-13 14:53 ` [PATCH v6 5/6] dt-bindings: display: add Unisoc's mipi dsi controller bindings Kevin Tang
2021-08-13 14:53 ` [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver Kevin Tang
2021-09-17 15:40 ` Maxime Ripard
2021-09-26 14:31 ` Kevin Tang
2021-09-26 14:31 ` Kevin Tang
2021-09-26 16:33 ` Sam Ravnborg
2021-10-06 18:25 ` Kevin Tang
2021-09-28 9:28 ` Maxime Ripard
2021-10-06 17:54 ` Kevin Tang
2021-10-20 10:09 ` Kevin Tang
2021-10-21 8:00 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFPSGXbLb3sjdtCa9zC7N37WHHU1WjhS6V=+kJC7Kt+wPSNqwQ@mail.gmail.com' \
--to=kevin3.tang@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mark.rutland@arm.com \
--cc=maxime@cerno.tech \
--cc=orsonzhai@gmail.com \
--cc=pony1.wu@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.