All of lore.kernel.org
 help / color / mirror / Atom feed
* [Xenomai] rt_e1000e is not getting loaded : e1000e: rteth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
@ 2018-07-17 13:01 Ashok kumar
  0 siblings, 0 replies; 2+ messages in thread
From: Ashok kumar @ 2018-07-17 13:01 UTC (permalink / raw)
  To: Xenomai@xenomai.org

Hi,

I am starting rtnet and using dmesg I get this output

e1000e: rteth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 2141.574339] rt_e1000e: 10/100 speed: disabling TSO

rt_e1000e is not getting loaded in rteth0

e1000e: rteth0 NIC Link is Up 100 Mbps, e1000e is only getting loaded
instead of rt_e1000e

I don’t find any difference in eth0 and rteth0,

I am using SOEM ethercat protocol for controlling servo drive and *EL5101*
| Incremental *encoder* interface

and I am using xenomai-3.07 with linux 4.9.90 patch

can you help to to get load the rt_e1000e.

Thank you

^ permalink raw reply	[flat|nested] 2+ messages in thread
* [Xenomai] rt_e1000e is not getting loaded : e1000e: rteth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
@ 2018-07-17 12:59 Ashok kumar
  0 siblings, 0 replies; 2+ messages in thread
From: Ashok kumar @ 2018-07-17 12:59 UTC (permalink / raw)
  To: Xenomai@xenomai.org

Hi,

I am starting rtnet and using dmesg I get this output

e1000e: rteth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 2141.574339] rt_e1000e: 10/100 speed: disabling TSO

rt_e1000e is not getting loaded in rteth0

e1000e: rteth0 NIC Link is Up 100 Mbps, e1000e is only getting loaded
instead of rt_e1000e

I don’t find any difference in eth0 and rteth0,

I am using SOEM ethercat protocol for controlling servo drive and *EL5101*
| Incremental *encoder* interface

can you help to to get load the rt_e1000e.

Thank you
Ashok

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-07-17 13:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-17 13:01 [Xenomai] rt_e1000e is not getting loaded : e1000e: rteth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None Ashok kumar
  -- strict thread matches above, loose matches on Subject: below --
2018-07-17 12:59 Ashok kumar

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.