* DVB-T be-all: tuning failed for 754mhz
@ 2014-07-09 10:28 Quentin Denis
2014-07-09 20:14 ` Quentin Denis
0 siblings, 1 reply; 2+ messages in thread
From: Quentin Denis @ 2014-07-09 10:28 UTC (permalink / raw)
To: linux-media
Hi all,
I am running a Terratec DVB Cinergy T stick MKII under openSUSE and cannot find
all the channels available in my region (Brussels). I have all the channels
from on 482Mhz but none on 754mh, whereas on Windows I receive both.
How can it be that it does not fully work under linux? Is there an
issue with the
driver? Neither kaffeine nor 'scan' will find it. The latter outputs a
tuning failure:
quentin@linux-v3k0:~> scan be-All.txt > channels.conf
scanning be-All.txt
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 754000000 0 3 9 1 1 3 0
initial transponder 482000000 0 1 9 3 1 3 0
initial transponder 506000000 0 1 9 3 1 3 0
initial transponder 666000000 0 3 9 1 1 3 0
initial transponder 834000000 0 3 9 1 1 3 0
>>> tune to:
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
Network Name 'VRTmux1'
0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running)
0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas (running)
0x0001 0x1030: pmt_pid 0x1030 VRT -- Ketnet op 12 (running)
0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)
0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)
0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running)
0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)
0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running)
0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara Continuo (running)
0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)
0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)
0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM Hits (running)
>>> tune to:
506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (12 services)
Done.
Best regards,
Quentin
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: DVB-T be-all: tuning failed for 754mhz
2014-07-09 10:28 DVB-T be-all: tuning failed for 754mhz Quentin Denis
@ 2014-07-09 20:14 ` Quentin Denis
0 siblings, 0 replies; 2+ messages in thread
From: Quentin Denis @ 2014-07-09 20:14 UTC (permalink / raw)
To: linux-media
I have the same issue with w_scan: http://pastebin.com/vCFD2972
On Wed, Jul 9, 2014 at 12:28 PM, Quentin Denis <quentin.denis@gmail.com> wrote:
> Hi all,
>
> I am running a Terratec DVB Cinergy T stick MKII under openSUSE and cannot find
> all the channels available in my region (Brussels). I have all the channels
> from on 482Mhz but none on 754mh, whereas on Windows I receive both.
>
> How can it be that it does not fully work under linux? Is there an
> issue with the
> driver? Neither kaffeine nor 'scan' will find it. The latter outputs a
> tuning failure:
>
> quentin@linux-v3k0:~> scan be-All.txt > channels.conf
> scanning be-All.txt
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 754000000 0 3 9 1 1 3 0
> initial transponder 482000000 0 1 9 3 1 3 0
> initial transponder 506000000 0 1 9 3 1 3 0
> initial transponder 666000000 0 3 9 1 1 3 0
> initial transponder 834000000 0 3 9 1 1 3 0
>>>> tune to:
> 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> (tuning failed)
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> Network Name 'VRTmux1'
> 0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running)
> 0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas (running)
> 0x0001 0x1030: pmt_pid 0x1030 VRT -- Ketnet op 12 (running)
> 0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)
> 0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)
> 0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running)
> 0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)
> 0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running)
> 0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara Continuo (running)
> 0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)
> 0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)
> 0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM Hits (running)
>>>> tune to:
> 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> (tuning failed)
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> (tuning failed)
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>>>> tune to:
> 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> (tuning failed)
> WARNING: >>> tuning failed!!!
> dumping lists (12 services)
> Done.
>
> Best regards,
> Quentin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-07-09 20:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-09 10:28 DVB-T be-all: tuning failed for 754mhz Quentin Denis
2014-07-09 20:14 ` Quentin Denis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.