* APEI: Can not request iomem region for GARs @ 2011-08-17 3:43 Pavel Ivanov 2011-08-19 21:48 ` Bjorn Helgaas 0 siblings, 1 reply; 27+ messages in thread From: Pavel Ivanov @ 2011-08-17 3:43 UTC (permalink / raw) To: linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 673 bytes --] Ever since I switched from kernel 2.6.38 to 3.0 and later versions I always get the following error message on each boot: [ 2.844242] APEI: Can not request iomem region <00000000bf7b522a-00000000bf7b522c> for GARs. If it was only in dmesg I wouldn't even notice it. But it's always printed on the console which is kind of annoying. I don't quite understand what this message is about and couldn't find anything on the internet. Does this message mean some error that I could fix? If no, is there any way I can suppress it (besides lowering the error level of messages printed on console, of course)? The full dmesg is in attachment if you need it. Thank you, Pavel [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 79571 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-rc2+ (pivanof@PavelComp) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #15 SMP PREEMPT Mon Aug 15 23:34:50 EDT 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc2+ root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/Z8NA-D6(C), BIOS 1002 06/28/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 0200000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 base 00BF800000 mask FFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 23fff6000-240000000 [ 0.000000] RAMDISK: 3484a000 - 3641d000 [ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf798540 00128 (v01 062810 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000bf798670 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79fcb0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: EINJ 00000000bf7986b0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000bf798840 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000bf798870 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000bf798a20 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] SRAT: Node 1 PXM 1 140000000-240000000 [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffe000 - 000000013fffffff] [ 0.000000] Initmem setup node 1 0000000140000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffe000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013be00000-ffff88013fdfffff] on node 0 [ 0.000000] [ffffea0005000000-ffffea0008ffffff] PMD -> [ffff88023b600000-ffff88023f5fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] 1: 0x00140000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 1046287 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 24 Processors exceeds NR_CPUS limit of 16 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000 [ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000 [ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s81088 r8192 d21312 u262144 [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2057994 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc2+ root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8138696k/9437184k available (6061k kernel code, 1057732k absent, 240756k reserved, 4938k data, 816k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1216 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2133.489 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.97 BogoMIPS (lpj=21334890) [ 0.000011] pid_max: default: 32768 minimum: 301 [ 0.000063] Security Framework initialized [ 0.000078] AppArmor: AppArmor initialized [ 0.000907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003368] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004331] Mount-cache hash table entries: 256 [ 0.004531] Initializing cgroup subsys cpuacct [ 0.004538] Initializing cgroup subsys memory [ 0.004564] Initializing cgroup subsys devices [ 0.004566] Initializing cgroup subsys freezer [ 0.004569] Initializing cgroup subsys net_cls [ 0.004571] Initializing cgroup subsys blkio [ 0.004617] CPU: Physical Processor ID: 0 [ 0.004619] CPU: Processor Core ID: 0 [ 0.004625] mce: CPU supports 9 MCE banks [ 0.004638] CPU0: Thermal monitoring enabled (TM1) [ 0.004648] using mwait in idle threads. [ 0.005743] ACPI: Core revision 20110623 [ 0.032724] ftrace: allocating 22978 entries in 91 pages [ 0.041966] Switched APIC routing to physical flat. [ 0.042425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.162612] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 0.278022] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.278030] ... version: 3 [ 0.278032] ... bit width: 48 [ 0.278033] ... generic registers: 4 [ 0.278035] ... value mask: 0000ffffffffffff [ 0.278036] ... max period: 000000007fffffff [ 0.278038] ... fixed-purpose events: 3 [ 0.278040] ... event mask: 000000070000000f [ 0.397789] Booting Node 0, Processors #1 [ 0.397793] smpboot cpu 1: start_ip = 9a000 [ 0.617342] #2 [ 0.617344] smpboot cpu 2: start_ip = 9a000 [ 0.836888] #3 [ 0.836890] smpboot cpu 3: start_ip = 9a000 [ 1.056451] Ok. [ 1.056455] Booting Node 1, Processors #4 [ 1.056458] smpboot cpu 4: start_ip = 9a000 [ 1.275987] #5 [ 1.275990] smpboot cpu 5: start_ip = 9a000 [ 1.495548] #6 [ 1.495550] smpboot cpu 6: start_ip = 9a000 [ 1.715095] #7 [ 1.715098] smpboot cpu 7: start_ip = 9a000 [ 1.894781] Brought up 8 CPUs [ 1.894785] Total of 8 processors activated (34134.29 BogoMIPS). [ 1.898835] devtmpfs: initialized [ 1.899038] PM: Registering ACPI NVS region at bf79e000 (204800 bytes) [ 1.899928] print_constraints: dummy: [ 1.899960] RTC time: 2:02:16, date: 08/17/11 [ 1.900007] NET: Registered protocol family 16 [ 1.900109] ACPI: bus type pci registered [ 1.900171] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.900174] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.940629] PCI: Using configuration type 1 for base access [ 1.941500] bio: create slab <bio-0> at 0 [ 1.941608] ACPI: Added _OSI(Module Device) [ 1.941610] ACPI: Added _OSI(Processor Device) [ 1.941612] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.941614] ACPI: Added _OSI(Processor Aggregator Device) [ 1.943246] ACPI: EC: Look up EC in DSDT [ 1.943525] \_SB_:_OSC evaluation returned wrong type [ 1.943527] _OSC request data:1 16 [ 1.945031] ACPI: Executed 1 blocks of module-level executable AML code [ 1.948028] ACPI: SSDT 00000000bf79e0c0 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.948537] ACPI: Dynamic OEM Table Load: [ 1.948540] ACPI: SSDT (null) 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.948638] ACPI: SSDT 00000000bf79f270 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 1.949082] ACPI: Dynamic OEM Table Load: [ 1.949085] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 1.949163] ACPI: SSDT 00000000bf79f8f0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 1.949627] ACPI: Dynamic OEM Table Load: [ 1.949630] ACPI: SSDT (null) 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 1.950182] ACPI: Interpreter enabled [ 1.950186] ACPI: (supports S0 S1 S4 S5) [ 1.950204] ACPI: Using IOAPIC for interrupt routing [ 1.957446] ACPI: No dock devices found. [ 1.957470] HEST: Table parsing has been initialized. [ 1.957474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.957559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.957717] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.957720] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.957723] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.957725] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 1.957727] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 1.957730] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 1.957746] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 1.957796] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.957800] pci 0000:00:00.0: PME# disabled [ 1.957826] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 1.957876] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.957879] pci 0000:00:01.0: PME# disabled [ 1.957902] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 1.957951] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.957954] pci 0000:00:02.0: PME# disabled [ 1.957976] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 1.958025] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.958028] pci 0000:00:03.0: PME# disabled [ 1.958054] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 1.958102] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.958106] pci 0000:00:07.0: PME# disabled [ 1.958128] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 1.958177] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 1.958180] pci 0000:00:08.0: PME# disabled [ 1.958202] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 1.958251] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.958255] pci 0000:00:09.0: PME# disabled [ 1.958277] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604 [ 1.958326] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.958329] pci 0000:00:0a.0: PME# disabled [ 1.958352] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 1.958420] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 1.958482] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 1.958547] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 1.958611] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 1.958678] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 1.958744] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 1.958807] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 1.958869] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 1.958883] pci 0000:00:16.0: reg 10: [mem 0xfbcd8000-0xfbcdbfff 64bit] [ 1.958950] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 1.958964] pci 0000:00:16.1: reg 10: [mem 0xfbcdc000-0xfbcdffff 64bit] [ 1.959030] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 1.959043] pci 0000:00:16.2: reg 10: [mem 0xfbce0000-0xfbce3fff 64bit] [ 1.959109] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 1.959122] pci 0000:00:16.3: reg 10: [mem 0xfbce4000-0xfbce7fff 64bit] [ 1.959188] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 1.959201] pci 0000:00:16.4: reg 10: [mem 0xfbce8000-0xfbcebfff 64bit] [ 1.959267] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 1.959281] pci 0000:00:16.5: reg 10: [mem 0xfbcec000-0xfbceffff 64bit] [ 1.959346] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 1.959360] pci 0000:00:16.6: reg 10: [mem 0xfbcf0000-0xfbcf3fff 64bit] [ 1.959425] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 1.959439] pci 0000:00:16.7: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] [ 1.959508] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 1.959552] pci 0000:00:1a.0: reg 20: [io 0xa400-0xa41f] [ 1.959600] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 1.959646] pci 0000:00:1a.1: reg 20: [io 0xa480-0xa49f] [ 1.959702] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 1.959724] pci 0000:00:1a.7: reg 10: [mem 0xfbcfd000-0xfbcfd3ff] [ 1.959800] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.959804] pci 0000:00:1a.7: PME# disabled [ 1.959828] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 1.959844] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] [ 1.959901] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.959905] pci 0000:00:1b.0: PME# disabled [ 1.959927] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 1.959971] pci 0000:00:1d.0: reg 20: [io 0xa800-0xa81f] [ 1.960017] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 1.960061] pci 0000:00:1d.1: reg 20: [io 0xa880-0xa89f] [ 1.960106] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 1.960151] pci 0000:00:1d.2: reg 20: [io 0xac00-0xac1f] [ 1.960196] pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03 [ 1.960241] pci 0000:00:1d.3: reg 20: [io 0xb000-0xb01f] [ 1.960295] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 1.960317] pci 0000:00:1d.7: reg 10: [mem 0xfbcfe000-0xfbcfe3ff] [ 1.960392] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.960397] pci 0000:00:1d.7: PME# disabled [ 1.960419] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 1.960477] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 1.960562] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003) [ 1.960567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003) [ 1.960603] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101 [ 1.960619] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07] [ 1.960627] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883] [ 1.960636] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807] [ 1.960644] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483] [ 1.960653] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb40f] [ 1.960661] pci 0000:00:1f.2: reg 24: [io 0xb080-0xb08f] [ 1.960699] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 1.960715] pci 0000:00:1f.3: reg 10: [mem 0xfbcff000-0xfbcff0ff 64bit] [ 1.960737] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 1.960771] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101 [ 1.960787] pci 0000:00:1f.5: reg 10: [io 0xcc00-0xcc07] [ 1.960795] pci 0000:00:1f.5: reg 14: [io 0xc880-0xc883] [ 1.960804] pci 0000:00:1f.5: reg 18: [io 0xc800-0xc807] [ 1.960812] pci 0000:00:1f.5: reg 1c: [io 0xc480-0xc483] [ 1.960820] pci 0000:00:1f.5: reg 20: [io 0xc400-0xc40f] [ 1.960829] pci 0000:00:1f.5: reg 24: [io 0xc080-0xc08f] [ 1.960915] pci 0000:08:00.0: [168c:002b] type 0 class 0x000280 [ 1.960934] pci 0000:08:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 1.961001] pci 0000:08:00.0: supports D1 [ 1.961003] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 1.961007] pci 0000:08:00.0: PME# disabled [ 1.974557] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 1.974564] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.974614] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 1.974666] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 1.974720] pci 0000:05:00.0: [1002:68f9] type 0 class 0x000300 [ 1.974735] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.974747] pci 0000:05:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit] [ 1.974755] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff] [ 1.974769] pci 0000:05:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref] [ 1.974789] pci 0000:05:00.0: supports D1 D2 [ 1.974810] pci 0000:05:00.1: [1002:aa68] type 0 class 0x000403 [ 1.974825] pci 0000:05:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 1.974874] pci 0000:05:00.1: supports D1 D2 [ 1.994517] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 1.994522] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 1.994526] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.994533] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.994579] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 1.994631] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 1.994676] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.994723] pci 0000:01:04.0: [1102:0007] type 0 class 0x000401 [ 1.994740] pci 0000:01:04.0: reg 10: [io 0xdc00-0xdc1f] [ 1.994808] pci 0000:01:04.0: supports D1 D2 [ 1.994850] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 1.994854] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 1.994862] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.994864] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.994867] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.994869] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 1.994872] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 1.994874] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 1.994907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.995108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.995198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 1.995225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT] [ 1.995250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 1.995282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 1.995307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE8._PRT] [ 1.995332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 1.995360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT] [ 1.995384] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.995388] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 1.995389] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.012829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.012875] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 2.012915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) [ 2.012959] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.013003] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.013048] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 2.013092] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 2.013136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15) [ 2.013268] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.013275] vgaarb: loaded [ 2.013277] vgaarb: bridge control possible 0000:05:00.0 [ 2.013432] SCSI subsystem initialized [ 2.013475] libata version 3.00 loaded. [ 2.013521] usbcore: registered new interface driver usbfs [ 2.013533] usbcore: registered new interface driver hub [ 2.013562] usbcore: registered new device driver usb [ 2.013671] wmi: Mapper loaded [ 2.013673] PCI: Using ACPI for IRQ routing [ 2.020038] PCI: Discovered peer bus fe [ 2.020077] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600 [ 2.020103] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600 [ 2.020130] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600 [ 2.020153] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600 [ 2.020177] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600 [ 2.020202] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600 [ 2.020227] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600 [ 2.020250] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600 [ 2.020273] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.020296] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.020321] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600 [ 2.020344] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600 [ 2.020367] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600 [ 2.020392] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600 [ 2.020418] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600 [ 2.020441] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600 [ 2.020464] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.020487] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.020513] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600 [ 2.020536] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600 [ 2.020559] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600 [ 2.020585] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600 [ 2.021067] PCI: Discovered peer bus ff [ 2.021089] pci 0000:ff:00.0: [8086:2c40] type 0 class 0x000600 [ 2.021111] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 2.021134] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 2.021155] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 2.021176] pci 0000:ff:02.4: [8086:2c14] type 0 class 0x000600 [ 2.021196] pci 0000:ff:02.5: [8086:2c15] type 0 class 0x000600 [ 2.021218] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 2.021241] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 2.021262] pci 0000:ff:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.021283] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.021305] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 2.021325] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 2.021345] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 2.021366] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 2.021388] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 2.021411] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 2.021431] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.021452] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.021475] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 2.021495] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 2.021516] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 2.021536] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 2.022031] PCI: pci_cache_line_size set to 64 bytes [ 2.022242] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 2.022244] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 2.022334] NetLabel: Initializing [ 2.022336] NetLabel: domain hash size = 128 [ 2.022338] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.022351] NetLabel: unlabeled traffic allowed by default [ 2.022404] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.022410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.022417] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.104428] Switching to clocksource hpet [ 2.112943] AppArmor: AppArmor Filesystem Enabled [ 2.112972] pnp: PnP ACPI init [ 2.112986] ACPI: bus type pnp registered [ 2.113105] pnp 00:00: [bus 00-ff] [ 2.113108] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.113111] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.113113] pnp 00:00: [io 0x0d00-0xffff window] [ 2.113115] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.113117] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.113120] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 2.113122] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 2.113205] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.113216] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 2.113218] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 2.113220] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 2.113222] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 2.113228] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 2.113230] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 2.113347] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 2.113350] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 2.113352] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 2.113355] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 2.113358] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 2.113361] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 2.113364] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.113399] pnp 00:02: [dma 4] [ 2.113402] pnp 00:02: [io 0x0000-0x000f] [ 2.113404] pnp 00:02: [io 0x0081-0x0083] [ 2.113405] pnp 00:02: [io 0x0087] [ 2.113407] pnp 00:02: [io 0x0089-0x008b] [ 2.113409] pnp 00:02: [io 0x008f] [ 2.113411] pnp 00:02: [io 0x00c0-0x00df] [ 2.113439] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.113450] pnp 00:03: [io 0x0070-0x0071] [ 2.113461] pnp 00:03: [irq 8] [ 2.113489] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.113497] pnp 00:04: [io 0x0061] [ 2.113524] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.113532] pnp 00:05: [io 0x00f0-0x00ff] [ 2.113538] pnp 00:05: [irq 13] [ 2.113569] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.113726] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.113728] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.113731] pnp 00:06: [io 0x0290-0x029f] [ 2.113814] system 00:06: [io 0x0290-0x029f] has been reserved [ 2.113818] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.113922] pnp 00:07: [io 0x0010-0x001f] [ 2.113924] pnp 00:07: [io 0x0022-0x003f] [ 2.113926] pnp 00:07: [io 0x0044-0x005f] [ 2.113927] pnp 00:07: [io 0x0062-0x0063] [ 2.113929] pnp 00:07: [io 0x0065-0x006f] [ 2.113931] pnp 00:07: [io 0x0072-0x007f] [ 2.113933] pnp 00:07: [io 0x0080] [ 2.113935] pnp 00:07: [io 0x0084-0x0086] [ 2.113936] pnp 00:07: [io 0x0088] [ 2.113938] pnp 00:07: [io 0x008c-0x008e] [ 2.113940] pnp 00:07: [io 0x0090-0x009f] [ 2.113942] pnp 00:07: [io 0x00a2-0x00bf] [ 2.113944] pnp 00:07: [io 0x00e0-0x00ef] [ 2.113946] pnp 00:07: [io 0x04d0-0x04d1] [ 2.113948] pnp 00:07: [io 0x0ca0-0x0caf] [ 2.113949] pnp 00:07: [io 0x0800-0x087f] [ 2.113952] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 2.113954] pnp 00:07: [io 0x0500-0x057f] [ 2.113956] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 2.113958] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 2.113960] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 2.114063] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 2.114066] system 00:07: [io 0x0ca0-0x0caf] has been reserved [ 2.114068] system 00:07: [io 0x0800-0x087f] has been reserved [ 2.114071] system 00:07: [io 0x0500-0x057f] has been reserved [ 2.114074] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.114077] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.114080] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 2.114083] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.114141] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 2.114174] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.114298] Switched to NOHz mode on CPU #0 [ 2.114360] Switched to NOHz mode on CPU #7 [ 2.114368] Switched to NOHz mode on CPU #1 [ 2.114377] Switched to NOHz mode on CPU #6 [ 2.114380] Switched to NOHz mode on CPU #2 [ 2.114391] Switched to NOHz mode on CPU #3 [ 2.114395] Switched to NOHz mode on CPU #4 [ 2.114402] Switched to NOHz mode on CPU #5 [ 2.114406] pnp 00:09: [io 0x03f8-0x03ff] [ 2.114414] pnp 00:09: [irq 4] [ 2.114416] pnp 00:09: [dma 0 disabled] [ 2.114506] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.114714] pnp 00:0a: [io 0x02f8-0x02ff] [ 2.114720] pnp 00:0a: [irq 3] [ 2.114722] pnp 00:0a: [dma 0 disabled] [ 2.114825] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.114895] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 2.114897] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 2.114982] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.114985] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.114988] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.115045] pnp 00:0c: [io 0x0060] [ 2.115047] pnp 00:0c: [io 0x0064] [ 2.115053] pnp 00:0c: [irq 12] [ 2.115095] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 2.115126] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 2.115210] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 2.115214] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.115372] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 2.115374] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 2.115376] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 2.115378] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 2.115380] pnp 00:0e: [mem 0xfed90000-0xffffffff] [ 2.115478] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.115481] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 2.115484] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.115486] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.115489] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 2.115493] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.115614] pnp: PnP ACPI: found 15 devices [ 2.115616] ACPI: ACPI bus type pnp unregistered [ 2.123534] PCI: max bus depth: 1 pci_try_num: 2 [ 2.123595] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.123600] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.123607] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.123617] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.123626] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.123629] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.123634] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.123638] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.123643] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.123653] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.123662] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.123671] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 2.123674] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.123693] pci 0000:00:01.0: setting latency timer to 64 [ 2.123700] pci 0000:00:02.0: setting latency timer to 64 [ 2.123706] pci 0000:00:03.0: setting latency timer to 64 [ 2.123713] pci 0000:00:07.0: setting latency timer to 64 [ 2.123720] pci 0000:00:08.0: setting latency timer to 64 [ 2.123726] pci 0000:00:09.0: setting latency timer to 64 [ 2.123733] pci 0000:00:0a.0: setting latency timer to 64 [ 2.123739] pci 0000:00:1e.0: setting latency timer to 64 [ 2.123744] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.123747] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.123749] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.123751] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 2.123753] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.123756] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.123758] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.123760] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.123763] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 2.123765] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.123768] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 2.123770] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 2.123773] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 2.123775] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 2.123777] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 2.123779] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.123781] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.123784] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 2.123786] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 2.123789] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 2.123791] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 2.123846] NET: Registered protocol family 2 [ 2.124091] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.125336] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.127362] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.127598] TCP: Hash tables configured (established 524288 bind 65536) [ 2.127600] TCP reno registered [ 2.127617] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.127663] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.127839] NET: Registered protocol family 1 [ 2.128058] pci 0000:05:00.0: Boot video device [ 2.128140] PCI: CLS 256 bytes, default 64 [ 2.128192] Trying to unpack rootfs image as initramfs... [ 2.743741] Freeing initrd memory: 28492k freed [ 2.750927] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.750933] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000 [ 2.750936] software IO TLB at phys 0xbb77b000 - 0xbf77b000 [ 2.752268] audit: initializing netlink socket (disabled) [ 2.752284] type=2000 audit(1313546536.550:1): initialized [ 2.791760] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.838717] VFS: Disk quotas dquot_6.5.2 [ 2.838799] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.839535] fuse init (API version 7.16) [ 2.839649] msgmni has been set to 15951 [ 2.839956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.839990] io scheduler noop registered [ 2.839992] io scheduler deadline registered [ 2.840037] io scheduler cfq registered (default) [ 2.840550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.840574] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.840675] intel_idle: MWAIT substates: 0x1120 [ 2.840691] intel_idle: v0.4 model 0x1A [ 2.840693] intel_idle: lapic_timer_reliable_states 0x2 [ 2.840836] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.840842] ACPI: Power Button [PWRB] [ 2.840878] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.840882] ACPI: Power Button [PWRF] [ 2.841090] ACPI: acpi_idle yielding to intel_idle [ 2.844242] APEI: Can not request iomem region <00000000bf7b522a-00000000bf7b522c> for GARs. [ 2.844340] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 2.844398] \_SB_:_OSC evaluation returned wrong type [ 2.844400] _OSC request data:1 0 0 [ 2.844404] GHES: Failed to enable APEI firmware first mode. [ 2.844487] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.864986] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.033061] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.741107] Refined TSC clocksource calibration: 2133.409 MHz. [ 3.741112] Switching to clocksource tsc [ 7.983072] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.142622] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.292053] Linux agpgart interface v0.103 [ 8.293378] brd: module loaded [ 8.294017] loop: module loaded [ 8.294217] ata_piix 0000:00:1f.2: version 2.13 [ 8.294245] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.294253] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 8.294304] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 8.294526] scsi0 : ata_piix [ 8.294619] scsi1 : ata_piix [ 8.295550] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23 [ 8.295556] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23 [ 8.295583] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.295588] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 8.295627] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 8.295801] scsi2 : ata_piix [ 8.295872] scsi3 : ata_piix [ 8.296631] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 8.296635] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 8.296975] Fixed MDIO Bus: probed [ 8.297003] PPP generic driver version 2.4.2 [ 8.297048] tun: Universal TUN/TAP device driver, 1.6 [ 8.297049] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.297136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.297165] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.297188] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.297192] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.297230] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 8.297262] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.301151] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 8.301166] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcfd000 [ 8.321696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.321842] hub 1-0:1.0: USB hub found [ 8.321847] hub 1-0:1.0: 4 ports detected [ 8.321948] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.321963] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.321966] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.322011] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 8.322036] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.325908] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 8.325914] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfe000 [ 8.341653] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.341775] hub 2-0:1.0: USB hub found [ 8.341780] hub 2-0:1.0: 8 ports detected [ 8.341881] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.341902] uhci_hcd: USB Universal Host Controller Interface driver [ 8.341935] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.341941] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.341945] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.341984] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.342018] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400 [ 8.342128] hub 3-0:1.0: USB hub found [ 8.342133] hub 3-0:1.0: 2 ports detected [ 8.342217] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.342223] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.342226] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.342274] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.342299] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480 [ 8.342413] hub 4-0:1.0: USB hub found [ 8.342417] hub 4-0:1.0: 2 ports detected [ 8.342498] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.342504] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.342508] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.342557] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.342586] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800 [ 8.342697] hub 5-0:1.0: USB hub found [ 8.342701] hub 5-0:1.0: 2 ports detected [ 8.342803] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.342809] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.342812] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.342850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.342884] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a880 [ 8.342995] hub 6-0:1.0: USB hub found [ 8.342999] hub 6-0:1.0: 2 ports detected [ 8.343093] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.343099] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.343102] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.343141] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 8.343165] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 [ 8.343277] hub 7-0:1.0: USB hub found [ 8.343282] hub 7-0:1.0: 2 ports detected [ 8.343362] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8.343367] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8.343371] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 8.343412] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 8.343437] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b000 [ 8.343547] hub 8-0:1.0: USB hub found [ 8.343552] hub 8-0:1.0: 2 ports detected [ 8.343689] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 8.343691] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 8.346351] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.346380] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.346501] mousedev: PS/2 mouse device common for all mice [ 8.346641] rtc_cmos 00:03: RTC can wake from S4 [ 8.346750] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.346776] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.346893] device-mapper: uevent: version 1.0.3 [ 8.346987] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 8.347059] device-mapper: multipath: version 1.3.0 loaded [ 8.347061] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.347340] cpuidle: using governor ladder [ 8.347623] cpuidle: using governor menu [ 8.347625] EFI Variables Facility v0.08 2004-May-17 [ 8.347895] TCP cubic registered [ 8.348035] NET: Registered protocol family 10 [ 8.348691] NET: Registered protocol family 17 [ 8.348708] Registering the dns_resolver key type [ 8.349020] PM: Hibernation image not present or could not be loaded. [ 8.349035] registered taskstats version 1 [ 8.372454] Magic number: 7:459:5 [ 8.372862] rtc_cmos 00:03: setting system clock to 2011-08-17 02:02:23 UTC (1313546543) [ 8.376489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.376491] EDD information not available. [ 8.652147] ata3: SATA link down (SStatus 0 SControl 300) [ 8.663101] ata4: SATA link down (SStatus 0 SControl 300) [ 8.721024] usb 2-2: new high speed USB device number 3 using ehci_hcd [ 9.150212] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.150228] ata2.01: SATA link down (SStatus 0 SControl 300) [ 9.150241] ata2.01: link offline, clearing class 3 to NONE [ 9.160132] usb 5-1: new low speed USB device number 2 using uhci_hcd [ 9.160200] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.160215] ata1.01: SATA link down (SStatus 0 SControl 300) [ 9.170367] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 [ 9.170849] ata1.00: ATA-8: ST31000524AS, JC45, max UDMA/133 [ 9.170854] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 9.210352] ata2.00: configured for UDMA/100 [ 9.210560] ata1.00: configured for UDMA/133 [ 9.210967] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5 [ 9.211300] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.211468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.211536] sd 0:0:0:0: [sda] Write Protect is off [ 9.211539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.211559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.213275] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 [ 9.215984] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.215989] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.216201] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.216466] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.247120] sda: sda1 sda2 < sda5 > [ 9.248129] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.250663] Freeing unused kernel memory: 816k freed [ 9.250843] Write protecting the kernel read-only data: 10240k [ 9.253449] Freeing unused kernel memory: 64k freed [ 9.260185] Freeing unused kernel memory: 1528k freed [ 9.285267] udev[96]: starting version 167 [ 9.335960] [drm] Initialized drm 1.1.0 20060810 [ 9.361892] [drm] radeon defaulting to kernel modesetting. [ 9.361895] [drm] radeon kernel modesetting enabled. [ 9.362006] radeon 0000:05:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 9.362012] radeon 0000:05:00.0: setting latency timer to 64 [ 9.362467] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340). [ 9.362514] [drm] register mmio base: 0xFBDC0000 [ 9.362516] [drm] register mmio size: 131072 [ 9.362677] ATOM BIOS: 113 [ 9.362754] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 9.362757] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 9.362764] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 9.362766] [drm] Detected VRAM RAM=1024M, BAR=256M [ 9.362768] [drm] RAM width 64bits DDR [ 9.363068] [TTM] Zone kernel: Available graphics memory: 4084798 kiB. [ 9.363072] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 9.363074] [TTM] Initializing pool allocator. [ 9.363101] [drm] radeon: 1024M of VRAM memory ready [ 9.363103] [drm] radeon: 512M of GTT memory ready. [ 9.363120] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.363122] [drm] Driver supports precise vblank timestamp query. [ 9.363168] radeon 0000:05:00.0: irq 64 for MSI/MSI-X [ 9.363175] radeon 0000:05:00.0: radeon: using MSI. [ 9.363214] [drm] radeon: irq initialized. [ 9.363220] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 9.363943] [drm] Loading CEDAR Microcode [ 9.372696] radeon 0000:05:00.0: WB enabled [ 9.388760] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 9.389016] generic-usb 0003:05D5:0624.0001: input,hidraw0: USB HID v1.10 Keyboard [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input0 [ 9.389619] [drm] ring test succeeded in 1 usecs [ 9.389749] [drm] radeon: ib pool ready. [ 9.389831] [drm] ib test succeeded in 0 usecs [ 9.389840] failed to evaluate ATIF got AE_BAD_PARAMETER [ 9.390099] [drm] Radeon Display Connectors [ 9.390101] [drm] Connector 0: [ 9.390103] [drm] HDMI-A [ 9.390104] [drm] HPD1 [ 9.390106] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 9.390108] [drm] Encoders: [ 9.390110] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.390112] [drm] Connector 1: [ 9.390113] [drm] DVI-I [ 9.390114] [drm] HPD4 [ 9.390116] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 9.390118] [drm] Encoders: [ 9.390120] [drm] DFP2: INTERNAL_UNIPHY [ 9.390122] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.390123] [drm] Connector 2: [ 9.390125] [drm] VGA [ 9.390127] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 9.390129] [drm] Encoders: [ 9.390130] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 9.400162] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 9.404673] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 [ 9.405033] generic-usb 0003:05D5:0624.0002: input,hidraw1: USB HID v1.10 Device [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input1 [ 9.405055] usbcore: registered new interface driver usbhid [ 9.405058] usbhid: USB HID core driver [ 9.453635] [drm] Radeon display connector DVI-I-1: Found valid EDID [ 9.463477] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 9.463501] [drm] Internal thermal controller with fan control [ 9.463545] [drm] radeon: power management initialized [ 9.464758] parse error at position 5 in video mode 'vesafb' [ 9.464760] parse error at position 5 in video mode 'vesafb' [ 9.464762] parse error at position 5 in video mode 'vesafb' [ 9.544712] [drm] fb mappable at 0xD0141000 [ 9.544715] [drm] vram apper at 0xD0000000 [ 9.544717] [drm] size 7299072 [ 9.544718] [drm] fb depth is 24 [ 9.544720] [drm] pitch is 6912 [ 9.544923] fbcon: radeondrmfb (fb0) is primary device [ 9.999581] Console: switching to colour frame buffer device 210x65 [ 10.003918] fb0: radeondrmfb frame buffer device [ 10.003920] drm: registered panic notifier [ 10.003927] [drm] Initialized radeon 2.11.0 20080528 for 0000:05:00.0 on minor 0 [ 10.453965] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.446891] udev[462]: starting version 167 [ 12.447386] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.630618] dca service started, version 1.12.1 [ 13.761577] cfg80211: Calling CRDA to update world regulatory domain [ 14.175097] EDAC MC: Ver: 2.1.0 [ 14.200114] Linux video capture interface: v2.00 [ 14.322792] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0 [ 14.322811] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED) [ 14.322847] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 14.322856] EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 14.322859] EDAC i7core: Driver loaded. [ 14.491688] lp: driver loaded but no devices found [ 14.552962] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 14.553033] ioatdma 0000:00:16.0: enabling device (0000 -> 0002) [ 14.553053] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 14.553084] ioatdma 0000:00:16.0: setting latency timer to 64 [ 14.553125] ioatdma 0000:00:16.0: irq 65 for MSI/MSI-X [ 14.553439] ioatdma 0000:00:16.1: enabling device (0000 -> 0002) [ 14.553452] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 14.553475] ioatdma 0000:00:16.1: setting latency timer to 64 [ 14.553512] ioatdma 0000:00:16.1: irq 66 for MSI/MSI-X [ 14.553733] ioatdma 0000:00:16.2: enabling device (0000 -> 0002) [ 14.553744] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 14.553764] ioatdma 0000:00:16.2: setting latency timer to 64 [ 14.553799] ioatdma 0000:00:16.2: irq 67 for MSI/MSI-X [ 14.554003] ioatdma 0000:00:16.3: enabling device (0000 -> 0002) [ 14.554014] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 14.554033] ioatdma 0000:00:16.3: setting latency timer to 64 [ 14.554069] ioatdma 0000:00:16.3: irq 68 for MSI/MSI-X [ 14.554264] ioatdma 0000:00:16.4: enabling device (0000 -> 0002) [ 14.554269] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 14.554289] ioatdma 0000:00:16.4: setting latency timer to 64 [ 14.554324] ioatdma 0000:00:16.4: irq 69 for MSI/MSI-X [ 14.554532] ioatdma 0000:00:16.5: enabling device (0000 -> 0002) [ 14.554537] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 14.554556] ioatdma 0000:00:16.5: setting latency timer to 64 [ 14.554592] ioatdma 0000:00:16.5: irq 70 for MSI/MSI-X [ 14.554793] ioatdma 0000:00:16.6: enabling device (0000 -> 0002) [ 14.554798] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 14.554818] ioatdma 0000:00:16.6: setting latency timer to 64 [ 14.554853] ioatdma 0000:00:16.6: irq 71 for MSI/MSI-X [ 14.555045] ioatdma 0000:00:16.7: enabling device (0000 -> 0002) [ 14.555051] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 14.555070] ioatdma 0000:00:16.7: setting latency timer to 64 [ 14.555105] ioatdma 0000:00:16.7: irq 72 for MSI/MSI-X [ 14.661408] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 14.663519] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input4 [ 14.663638] usbcore: registered new interface driver uvcvideo [ 14.663641] USB Video Class driver (1.1.1) [ 14.711071] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 14.852890] type=1400 audit(1313546549.980:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=753 comm="apparmor_parser" [ 14.852957] type=1400 audit(1313546549.980:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser" [ 14.853012] type=1400 audit(1313546549.980:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser" [ 15.060902] ipmi message handler version 39.2 [ 15.143907] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 15.198635] cfg80211: World regulatory domain updated: [ 15.198638] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.198642] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.198644] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.198647] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.198650] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.198652] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.360680] ipmi device interface [ 15.466389] IPMI System Interface driver. [ 15.466454] ipmi_si: probing via SMBIOS [ 15.466456] ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0 [ 15.466458] ipmi_si: Adding SMBIOS-specified kcs state machine [ 15.466462] ipmi_si: probing via SPMI [ 15.466464] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 15.466466] ipmi_si: Adding SPMI-specified kcs state machine [ 15.466469] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0 [ 15.466472] ipmi_si: Could not set up I/O space [ 15.498148] ath9k 0000:08:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 15.498158] ath9k 0000:08:00.0: setting latency timer to 64 [ 15.548373] ath: EEPROM regdomain: 0x809c [ 15.548375] ath: EEPROM indicates we should expect a country code [ 15.548377] ath: doing EEPROM country->regdmn map search [ 15.548379] ath: country maps to regdmn code: 0x52 [ 15.548381] ath: Country alpha2 being used: CN [ 15.548382] ath: Regpair used: 0x52 [ 15.548385] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 15.548388] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548390] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 15.548393] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548395] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 15.548397] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548399] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 15.548402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548404] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 15.548406] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548409] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 15.548411] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 15.548416] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548418] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 15.548420] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548422] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 15.548425] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548427] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 15.548430] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548432] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 15.548434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.548436] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 15.548439] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 15.548441] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 15.549967] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 15.549970] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549973] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 15.549975] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549978] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 15.549980] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549982] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 15.549985] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549987] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 15.549990] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549992] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 15.549994] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.549996] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 15.549999] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550001] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 15.550004] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550006] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 15.550008] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550011] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 15.550013] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550015] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 15.550018] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550020] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 15.550023] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550025] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 15.550027] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.550029] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 15.550032] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 15.567357] ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 15.567366] ipmi_si: Interface detection failed [ 15.596417] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 15.597321] cfg80211: Calling CRDA for country: CN [ 15.597393] Registered led device: ath9k-phy0 [ 15.597398] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011820000, irq=28 [ 15.601034] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 15.601038] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601041] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 15.601043] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601046] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 15.601048] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601051] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 15.601053] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601055] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 15.601058] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601060] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 15.601063] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601065] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 15.601067] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601069] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 15.601072] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601074] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 15.601077] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601079] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 15.601082] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601084] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 15.601086] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601088] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 15.601091] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601093] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 15.601096] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.601098] cfg80211: Disabling freq 2484 MHz [ 15.601101] cfg80211: Regulatory domain changed to country: CN [ 15.601102] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.601105] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 15.601107] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 15.957903] coretemp coretemp.0: TjMax is 97 C. [ 15.958105] coretemp coretemp.0: TjMax is 97 C. [ 15.958183] coretemp coretemp.0: TjMax is 97 C. [ 15.958332] coretemp coretemp.0: TjMax is 97 C. [ 15.958377] coretemp coretemp.4: TjMax is 97 C. [ 15.958390] coretemp coretemp.4: TjMax is 97 C. [ 15.958472] coretemp coretemp.4: TjMax is 97 C. [ 15.958559] coretemp coretemp.4: TjMax is 97 C. [ 16.088747] w83627ehf: Found W83667HG chip at 0x290 [ 16.505259] i2c i2c-8: Found w83795adg rev. B at 0x2f [ 16.670056] snd_ca0106 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.670075] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 16.754637] w83795 8-002f: PECI agent 1 Tbase temperature: 85 [ 16.774584] w83795 8-002f: PECI agent 2 Tbase temperature: 85 [ 16.832062] type=1400 audit(1313546551.960:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1027 comm="apparmor_parser" [ 16.879767] type=1400 audit(1313546552.010:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1032 comm="apparmor_parser" [ 17.014083] type=1400 audit(1313546552.140:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1028 comm="apparmor_parser" [ 17.014157] type=1400 audit(1313546552.150:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1028 comm="apparmor_parser" [ 17.014218] type=1400 audit(1313546552.150:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1028 comm="apparmor_parser" [ 17.165463] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 17.165534] snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X [ 17.165562] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 17.253644] hda-intel: no codecs found! [ 17.253726] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 17.253794] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 17.254132] snd_hda_intel 0000:05:00.1: irq 73 for MSI/MSI-X [ 17.254160] snd_hda_intel 0000:05:00.1: setting latency timer to 64 [ 17.267829] type=1400 audit(1313546552.400:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1031 comm="apparmor_parser" [ 17.268043] type=1400 audit(1313546552.400:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1031 comm="apparmor_parser" [ 17.495190] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 17.495638] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:07.0/0000:05:00.1/sound/card1/input6 [ 18.168995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.349963] ppdev: user-space parallel port driver [ 20.320613] Adding 19529724k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:19529724k [ 21.006581] wlan0: authenticate with 00:26:b8:18:ff:90 (try 1) [ 21.009971] wlan0: authenticated [ 21.010001] wlan0: associate with 00:26:b8:18:ff:90 (try 1) [ 21.013159] wlan0: RX AssocResp from 00:26:b8:18:ff:90 (capab=0x431 status=0 aid=3) [ 21.013163] wlan0: associated [ 21.014062] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.115873] cfg80211: Calling CRDA for country: US [ 21.119585] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.119590] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119593] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.119596] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119598] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.119601] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119603] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.119605] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119607] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.119610] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119612] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.119615] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119617] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.119620] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119622] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.119624] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119626] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.119629] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119631] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.119634] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119636] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.119638] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 21.119641] cfg80211: Disabling freq 2467 MHz [ 21.119642] cfg80211: Disabling freq 2472 MHz [ 21.119644] cfg80211: Disabling freq 2484 MHz [ 21.119648] cfg80211: Regulatory domain changed to country: US [ 21.119650] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.119652] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.119655] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 21.119657] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.119660] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.119662] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.119665] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 22.651419] audit_printk_skb: 6 callbacks suppressed [ 22.651422] type=1400 audit(1313546557.790:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1029 comm="apparmor_parser" [ 22.652639] type=1400 audit(1313546557.800:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1029 comm="apparmor_parser" [ 22.653018] type=1400 audit(1313546557.800:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1029 comm="apparmor_parser" [ 25.445869] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 27.935517] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-17 3:43 APEI: Can not request iomem region for GARs Pavel Ivanov @ 2011-08-19 21:48 ` Bjorn Helgaas 2011-08-22 5:43 ` Huang Ying 2011-08-22 7:12 ` Huang Ying 0 siblings, 2 replies; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-19 21:48 UTC (permalink / raw) To: Pavel Ivanov; +Cc: linux-kernel, linux-acpi, Huang Ying On Tue, Aug 16, 2011 at 9:43 PM, Pavel Ivanov <paivanof@gmail.com> wrote: > Ever since I switched from kernel 2.6.38 to 3.0 and later versions I > always get the following error message on each boot: > > [ 2.844242] APEI: Can not request iomem region > <00000000bf7b522a-00000000bf7b522c> for GARs. > > If it was only in dmesg I wouldn't even notice it. But it's always > printed on the console which is kind of annoying. > I don't quite understand what this message is about and couldn't find > anything on the internet. Does this message mean some error that I > could fix? If no, is there any way I can suppress it (besides lowering > the error level of messages printed on console, of course)? [+cc Huang Ying, APEI author] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) APEI: Can not request iomem region <00000000bf7b522a-00000000bf7b522c> for GARs. This register is in the ACPI NVS region, which is type E820_NVS (not E820_RESERVED), so e820_reserve_resources() reserves it as IORESOURCE_BUSY. My guess is that Huang tested this on machines where the EINJ/ERST registers are in "reserved" regions, not ACPI NVS regions. The "reserved" regions are not marked IORESOURCE_BUSY. Huang, when you fix this, please include something like the following (mangled) patch so the error message is more consistent with other resource messages. Could you also remove the ERST/EINJ/HEST "Table is not found" messages? As far as I can tell, these tables are optional, and printing the message is confusing to users, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/599715 Bjorn diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 8041248..6f97b59 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -460,9 +460,9 @@ int apei_resources_request(struct apei_resources *resources, desc); if (!r) { pr_err(APEI_PFX - "Can not request iomem region <%016llx-%016llx> for GARs.\n", + "can not request [mem %#010llx-%#010llx] for %s registers\n", (unsigned long long)res->start, - (unsigned long long)res->end); + (unsigned long long)res->end, desc); res_bak = res; goto err_unmap_iomem; } @@ -472,9 +472,9 @@ int apei_resources_request(struct apei_resources *resources, r = request_region(res->start, res->end - res->start, desc); if (!r) { pr_err(APEI_PFX - "Can not request ioport region <%016llx-%016llx> for GARs.\n", + "can not request [io %#06llx-%#06llx] for %s registers\n", (unsigned long long)res->start, - (unsigned long long)res->end); + (unsigned long long)res->end, desc); res_bak = res; goto err_unmap_ioport; } ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-19 21:48 ` Bjorn Helgaas @ 2011-08-22 5:43 ` Huang Ying 2011-08-22 7:12 ` Huang Ying 1 sibling, 0 replies; 27+ messages in thread From: Huang Ying @ 2011-08-22 5:43 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Pavel Ivanov, linux-kernel, linux-acpi On 08/20/2011 05:48 AM, Bjorn Helgaas wrote: > On Tue, Aug 16, 2011 at 9:43 PM, Pavel Ivanov <paivanof@gmail.com> wrote: >> Ever since I switched from kernel 2.6.38 to 3.0 and later versions I >> always get the following error message on each boot: >> >> [ 2.844242] APEI: Can not request iomem region >> <00000000bf7b522a-00000000bf7b522c> for GARs. >> >> If it was only in dmesg I wouldn't even notice it. But it's always >> printed on the console which is kind of annoying. >> I don't quite understand what this message is about and couldn't find >> anything on the internet. Does this message mean some error that I >> could fix? If no, is there any way I can suppress it (besides lowering >> the error level of messages printed on console, of course)? > > [+cc Huang Ying, APEI author] > > BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) > APEI: Can not request iomem region <00000000bf7b522a-00000000bf7b522c> for GARs. > > This register is in the ACPI NVS region, which is type E820_NVS (not > E820_RESERVED), so e820_reserve_resources() reserves it as > IORESOURCE_BUSY. My guess is that Huang tested this on machines where > the EINJ/ERST registers are in "reserved" regions, not ACPI NVS > regions. The "reserved" regions are not marked IORESOURCE_BUSY. > > Huang, when you fix this, please include something like the following > (mangled) patch so the error message is more consistent with other > resource messages. The patch looks good. Can you resubmit it with changelog? > Could you also remove the ERST/EINJ/HEST "Table is not found" > messages? As far as I can tell, these tables are optional, and > printing the message is confusing to users, e.g., > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/599715 Yes. This seems confusing to them. I will change this. Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-19 21:48 ` Bjorn Helgaas 2011-08-22 5:43 ` Huang Ying @ 2011-08-22 7:12 ` Huang Ying 2011-08-22 16:45 ` Bjorn Helgaas 2011-08-25 2:45 ` Pavel Ivanov 1 sibling, 2 replies; 27+ messages in thread From: Huang Ying @ 2011-08-22 7:12 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 129 bytes --] Hi, Pavel, Do you have time to try the patch attached with the mail? acpi_nvs.patch should go first. Best Regards, Huang Ying [-- Attachment #2: acpi_nvs.patch --] [-- Type: text/x-patch, Size: 4487 bytes --] Subject: [PATCH] ACPI, Record ACPI NVS regions Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mech. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch record ACPI NVS regions, so that we can avoid request resources for memory region inside it. Signed-off-by: Huang Ying <ying.huang@intel.com> --- arch/x86/kernel/e820.c | 4 ++-- drivers/acpi/Makefile | 3 ++- drivers/acpi/nvs.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/acpi.h | 20 ++++++++++++++------ 4 files changed, 64 insertions(+), 10 deletions(-) --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -713,7 +713,7 @@ void __init e820_mark_nosave_regions(uns } #endif -#ifdef CONFIG_HIBERNATION +#ifdef CONFIG_ACPI /** * Mark ACPI NVS memory region, so that we can save/restore it during * hibernation and the subsequent resume. @@ -726,7 +726,7 @@ static int __init e820_mark_nvs_memory(v struct e820entry *ei = &e820.map[i]; if (ei->type == E820_NVS) - suspend_nvs_register(ei->addr, ei->size); + acpi_nvs_register(ei->addr, ei->size); } return 0; --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -20,11 +20,12 @@ obj-y += acpi.o \ # All the builtin files are in the "acpi." module_param namespace. acpi-y += osl.o utils.o reboot.o acpi-y += atomicio.o +acpi-y += nvs.o # sleep related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_ACPI_SLEEP) += proc.o nvs.o +acpi-$(CONFIG_ACPI_SLEEP) += proc.o # --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -15,6 +15,50 @@ #include <linux/acpi_io.h> #include <acpi/acpiosxf.h> +/* ACPI NVS regions, APEI may use it */ + +struct nvs_region { + __u64 phys_start; + __u64 size; + struct list_head node; +}; + +static LIST_HEAD(nvs_region_list); + +#ifdef CONFIG_ACPI_SLEEP +static int suspend_nvs_register(unsigned long start, unsigned long size); +#else +static inline int suspend_nvs_register(unsigned long a, unsigned long b) +{ + return 0; +} +#endif + +int acpi_nvs_register(__u64 start, __u64 size) +{ + struct nvs_region *region; + + region = kmalloc(sizeof(*region), GFP_KERNEL); + if (region) + return -ENOMEM; + region->phys_start = start; + region->size = size; + list_add_tail(®ion->node, &nvs_region_list); + + return suspend_nvs_register(start, size); +} + +int acpi_nvs_for_each_region(int (*func)(__u64 start, __u64 size, void *data), + void *data) +{ + struct nvs_region *region; + + list_for_each_entry(region, &nvs_region_list, node) + func(region->phys_start, region->size, data); +} + + +#ifdef CONFIG_ACPI_SLEEP /* * Platforms, like ACPI, may want us to save some memory used by them during * suspend and to restore the contents of this memory during the subsequent @@ -41,7 +85,7 @@ static LIST_HEAD(nvs_list); * things so that the data from page-aligned addresses in this region will * be copied into separate RAM pages. */ -int suspend_nvs_register(unsigned long start, unsigned long size) +static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; @@ -159,3 +203,4 @@ void suspend_nvs_restore(void) if (entry->data) memcpy(entry->kaddr, entry->data, entry->size); } +#endif --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -306,6 +306,11 @@ extern acpi_status acpi_pci_osc_control_ u32 *mask, u32 req); extern void acpi_early_init(void); +extern int acpi_nvs_register(__u64 start, __u64 size); + +extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data); + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -348,15 +353,18 @@ static inline int acpi_table_parse(char { return -1; } -#endif /* !CONFIG_ACPI */ -#ifdef CONFIG_ACPI_SLEEP -int suspend_nvs_register(unsigned long start, unsigned long size); -#else -static inline int suspend_nvs_register(unsigned long a, unsigned long b) +static inline int acpi_nvs_register(__u64 start, __u64 size) { return 0; } -#endif + +static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data) +{ + return 0; +} + +#endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ [-- Attachment #3: nvs_exclude.patch --] [-- Type: text/x-patch, Size: 2521 bytes --] Subject: [BUGFIX] ACPI, APEI, Resolve false conflict between ACPI NVS and APEI Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mech. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch excludes ACPI NVS regions when APEI components request resources. So that they will not conflict with ACPI NVS regions. Reported-by: Pavel Ivanov <paivanof@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> --- drivers/acpi/apei/apei-base.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -449,8 +449,19 @@ int apei_resources_sub(struct apei_resou } EXPORT_SYMBOL_GPL(apei_resources_sub); +static int apei_get_nvs_callback(__u64 start, __u64 size, void *data) +{ + struct apei_resources *resources = data; + return apei_res_add(&resources->iomem, start, size); +} + +static int apei_get_nvs_resources(struct apei_resources *resources) +{ + return acpi_nvs_for_each_region(apei_get_nvs_callback, resources); +} + /* - * IO memory/port rersource management mechanism is used to check + * IO memory/port resource management mechanism is used to check * whether memory/port area used by GARs conflicts with normal memory * or IO memory/port of devices. */ @@ -459,12 +470,24 @@ int apei_resources_request(struct apei_r { struct apei_res *res, *res_bak = NULL; struct resource *r; + struct apei_resources nvs_resources; int rc; rc = apei_resources_sub(resources, &apei_resources_all); if (rc) return rc; + /* + * Some firmware uses ACPI NVS region, that has been marked as + * busy, so exclude it from APEI resources to avoid false + * conflict. + */ + apei_resources_init(&nvs_resources); + apei_get_nvs_resources(&nvs_resources); + rc = apei_resources_sub(resources, &nvs_resources); + if (rc) + goto res_fini; + rc = -EINVAL; list_for_each_entry(res, &resources->iomem, list) { r = request_mem_region(res->start, res->end - res->start, @@ -511,6 +534,8 @@ err_unmap_iomem: break; release_mem_region(res->start, res->end - res->start); } +res_fini: + apei_resources_fini(&nvs_resources); return rc; } EXPORT_SYMBOL_GPL(apei_resources_request); ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-22 7:12 ` Huang Ying @ 2011-08-22 16:45 ` Bjorn Helgaas 2011-08-22 21:04 ` Yinghai Lu 2011-08-25 2:45 ` Pavel Ivanov 1 sibling, 1 reply; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-22 16:45 UTC (permalink / raw) To: Huang Ying; +Cc: Pavel Ivanov, linux-kernel, linux-acpi, Yinghai Lu On Mon, Aug 22, 2011 at 1:12 AM, Huang Ying <ying.huang@intel.com> wrote: > Do you have time to try the patch attached with the mail? > acpi_nvs.patch should go first. I'm sure these patches make the messages go away, but I think this is the wrong way to fix the problem. We mark things "busy" in the resource trees as a mutual exclusion mechanism -- normally when a driver claims a resource and nothing else should be allowed to touch it. e820_reserve_resources() marks everything (except "reserved" regions) as busy. That probably makes sense for available RAM, since RAM is allocated and managed via other mechanisms. But I think it's wrong in this case because e820 is not a driver that is using the ACPI NVS region. In this case, we have an ACPI NVS region, and the APEI code is essentially a driver for some registers that reside there. APEI is the entity that manages those registers, and it needs to enforce mutual exclusion so nobody else touches them behind its back, so I think it makes sense for it to request the register regions and mark them busy. My proposal is to change e820 so it either leaves ACPI NVS out of the iomem_resource tree or puts it in but leaves it non-busy. Bjorn ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-22 16:45 ` Bjorn Helgaas @ 2011-08-22 21:04 ` Yinghai Lu 2011-08-23 0:32 ` Huang Ying 0 siblings, 1 reply; 27+ messages in thread From: Yinghai Lu @ 2011-08-22 21:04 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Huang Ying, Pavel Ivanov, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 963 bytes --] On Mon, Aug 22, 2011 at 9:45 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: > On Mon, Aug 22, 2011 at 1:12 AM, Huang Ying <ying.huang@intel.com> wrote: >> Do you have time to try the patch attached with the mail? >> acpi_nvs.patch should go first. > > In this case, we have an ACPI NVS region, and the APEI code is > essentially a driver for some registers that reside there. APEI is > the entity that manages those registers, and it needs to enforce > mutual exclusion so nobody else touches them behind its back, so I > think it makes sense for it to request the register regions and mark > them busy. > > My proposal is to change e820 so it either leaves ACPI NVS out of the > iomem_resource tree or puts it in but leaves it non-busy. assume Huang Ying only tested with UEFI native boot? i have one local patch for legacy mode booting, and it's similar to what Bjorn suggested. Please check the attached patch. Thanks Yinghai Lu [-- Attachment #2: apei_size_check_1.patch --] [-- Type: text/x-patch, Size: 737 bytes --] Subject: [PATCH] x86: allow NVS can be accessed by driver APEI related... Signed-off-by: Yinghai Lu <yinghai@kernel.org> --- arch/x86/kernel/e820.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Index: linux-2.6/arch/x86/kernel/e820.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/e820.c +++ linux-2.6/arch/x86/kernel/e820.c @@ -995,7 +995,8 @@ void __init e820_reserve_resources(void) * pcibios_resource_survey() */ if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) { - res->flags |= IORESOURCE_BUSY; + if (e820.map[i].type != E820_NVS) + res->flags |= IORESOURCE_BUSY; insert_resource(&iomem_resource, res); } res++; ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-22 21:04 ` Yinghai Lu @ 2011-08-23 0:32 ` Huang Ying 0 siblings, 0 replies; 27+ messages in thread From: Huang Ying @ 2011-08-23 0:32 UTC (permalink / raw) To: Yinghai Lu; +Cc: Bjorn Helgaas, Pavel Ivanov, linux-kernel, linux-acpi, lenb On 08/23/2011 05:04 AM, Yinghai Lu wrote: > On Mon, Aug 22, 2011 at 9:45 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: >> On Mon, Aug 22, 2011 at 1:12 AM, Huang Ying <ying.huang@intel.com> wrote: >>> Do you have time to try the patch attached with the mail? >>> acpi_nvs.patch should go first. >> >> In this case, we have an ACPI NVS region, and the APEI code is >> essentially a driver for some registers that reside there. APEI is >> the entity that manages those registers, and it needs to enforce >> mutual exclusion so nobody else touches them behind its back, so I >> think it makes sense for it to request the register regions and mark >> them busy. >> >> My proposal is to change e820 so it either leaves ACPI NVS out of the >> iomem_resource tree or puts it in but leaves it non-busy. > > assume Huang Ying only tested with UEFI native boot? No. I tested it with legacy BIOS. But ACPI NVS is not used by APEI on my testing machine. > i have one local patch for legacy mode booting, and it's similar to > what Bjorn suggested. > > Please check the attached patch. I think we need help from ACPI guys on why ACPI NVS is marked as busy. If my understanding were correct, ACPI NVS should not be used by OS at all, so it is marked as busy. But for APEI, Linux interprets some code (instructions in ERST/EINJ table) from firmware. I think this is similar with AML code accessing ACPI NVS. Hi, Len, Do you think my understanding is correct? Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-22 7:12 ` Huang Ying 2011-08-22 16:45 ` Bjorn Helgaas @ 2011-08-25 2:45 ` Pavel Ivanov 2011-08-26 4:13 ` Huang Ying 1 sibling, 1 reply; 27+ messages in thread From: Pavel Ivanov @ 2011-08-25 2:45 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 322 bytes --] Huang, Applying of your patches didn't help. I'm attaching new dmesg in case if you need it. Pavel On Mon, Aug 22, 2011 at 3:12 AM, Huang Ying <ying.huang@intel.com> wrote: > Hi, Pavel, > > Do you have time to try the patch attached with the mail? > acpi_nvs.patch should go first. > > Best Regards, > Huang Ying > > [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 83054 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-rc2-mods (pivanof@PavelComp) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #7 SMP PREEMPT Wed Aug 24 22:31:05 EDT 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc2-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/Z8NA-D6(C), BIOS 1002 06/28/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 0200000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 base 00BF800000 mask FFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 23fff6000-240000000 [ 0.000000] RAMDISK: 338de000 - 35c67000 [ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf798540 00128 (v01 062810 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000bf798670 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79fcb0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: EINJ 00000000bf7986b0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000bf798840 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000bf798870 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000bf798a20 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] SRAT: Node 1 PXM 1 140000000-240000000 [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffe000 - 000000013fffffff] [ 0.000000] Initmem setup node 1 0000000140000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffe000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013be00000-ffff88013fdfffff] on node 0 [ 0.000000] [ffffea0005000000-ffffea0008ffffff] PMD -> [ffff88023b600000-ffff88023f5fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] 1: 0x00140000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 1046287 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 24 Processors exceeds NR_CPUS limit of 16 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000 [ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000 [ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s81664 r8192 d20736 u262144 [ 0.000000] pcpu-alloc: s81664 r8192 d20736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2057994 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc2-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8128716k/9437184k available (6328k kernel code, 1057732k absent, 250736k reserved, 6742k data, 824k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1216 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2132.972 MHz processor. [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4265.94 BogoMIPS (lpj=21329720) [ 0.000012] pid_max: default: 32768 minimum: 301 [ 0.000065] Security Framework initialized [ 0.000080] AppArmor: AppArmor initialized [ 0.000929] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003391] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004354] Mount-cache hash table entries: 256 [ 0.004562] Initializing cgroup subsys cpuacct [ 0.004568] Initializing cgroup subsys memory [ 0.004594] Initializing cgroup subsys devices [ 0.004597] Initializing cgroup subsys freezer [ 0.004599] Initializing cgroup subsys net_cls [ 0.004601] Initializing cgroup subsys blkio [ 0.004646] CPU: Physical Processor ID: 0 [ 0.004648] CPU: Processor Core ID: 0 [ 0.004654] mce: CPU supports 9 MCE banks [ 0.004668] CPU0: Thermal monitoring enabled (TM1) [ 0.004677] using mwait in idle threads. [ 0.005826] ACPI: Core revision 20110623 [ 0.032889] ftrace: allocating 23800 entries in 94 pages [ 0.063742] Switched APIC routing to physical flat. [ 0.064206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.164203] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 0.278605] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.278614] ... version: 3 [ 0.278615] ... bit width: 48 [ 0.278617] ... generic registers: 4 [ 0.278618] ... value mask: 0000ffffffffffff [ 0.278620] ... max period: 000000007fffffff [ 0.278621] ... fixed-purpose events: 3 [ 0.278623] ... event mask: 000000070000000f [ 0.339355] NMI watchdog enabled, takes one hw-pmu counter. [ 0.418621] Booting Node 0, Processors #1 [ 0.418624] smpboot cpu 1: start_ip = 9a000 [ 0.598699] NMI watchdog enabled, takes one hw-pmu counter. [ 0.658640] #2 [ 0.658642] smpboot cpu 2: start_ip = 9a000 [ 0.838751] NMI watchdog enabled, takes one hw-pmu counter. [ 0.898635] #3 [ 0.898637] smpboot cpu 3: start_ip = 9a000 [ 1.078700] NMI watchdog enabled, takes one hw-pmu counter. [ 1.138659] Ok. [ 1.138662] Booting Node 1, Processors #4 [ 1.138665] smpboot cpu 4: start_ip = 9a000 [ 1.318716] NMI watchdog enabled, takes one hw-pmu counter. [ 1.378667] #5 [ 1.378669] smpboot cpu 5: start_ip = 9a000 [ 1.558720] NMI watchdog enabled, takes one hw-pmu counter. [ 1.618687] #6 [ 1.618690] smpboot cpu 6: start_ip = 9a000 [ 1.798765] NMI watchdog enabled, takes one hw-pmu counter. [ 1.858709] #7 [ 1.858711] smpboot cpu 7: start_ip = 9a000 [ 2.038765] NMI watchdog enabled, takes one hw-pmu counter. [ 2.058693] Brought up 8 CPUs [ 2.058697] Total of 8 processors activated (34133.22 BogoMIPS). [ 2.062713] devtmpfs: initialized [ 2.063790] print_constraints: dummy: [ 2.063822] RTC time: 2:39:46, date: 08/25/11 [ 2.063867] NET: Registered protocol family 16 [ 2.063968] ACPI: bus type pci registered [ 2.064029] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.064033] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 2.105721] PCI: Using configuration type 1 for base access [ 2.106675] bio: create slab <bio-0> at 0 [ 2.106777] ACPI: Added _OSI(Module Device) [ 2.106779] ACPI: Added _OSI(Processor Device) [ 2.106782] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.106784] ACPI: Added _OSI(Processor Aggregator Device) [ 2.108437] ACPI: EC: Look up EC in DSDT [ 2.108724] \_SB_:_OSC evaluation returned wrong type [ 2.108726] _OSC request data:1 16 [ 2.110232] ACPI: Executed 1 blocks of module-level executable AML code [ 2.113268] ACPI: SSDT 00000000bf79e0c0 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.113782] ACPI: Dynamic OEM Table Load: [ 2.113785] ACPI: SSDT (null) 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.113884] ACPI: SSDT 00000000bf79f270 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.114326] ACPI: Dynamic OEM Table Load: [ 2.114330] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.114408] ACPI: SSDT 00000000bf79f8f0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.114874] ACPI: Dynamic OEM Table Load: [ 2.114877] ACPI: SSDT (null) 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.115435] ACPI: Interpreter enabled [ 2.115440] ACPI: (supports S0 S1 S4 S5) [ 2.115457] ACPI: Using IOAPIC for interrupt routing [ 2.122732] ACPI: No dock devices found. [ 2.122755] HEST: Table parsing has been initialized. [ 2.122759] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.122844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.123005] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 2.123008] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 2.123010] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.123013] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 2.123015] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 2.123017] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 2.123034] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 2.123084] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.123088] pci 0000:00:00.0: PME# disabled [ 2.123115] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 2.123165] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.123169] pci 0000:00:01.0: PME# disabled [ 2.123192] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 2.123241] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 2.123244] pci 0000:00:02.0: PME# disabled [ 2.123267] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 2.123316] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.123319] pci 0000:00:03.0: PME# disabled [ 2.123344] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 2.123393] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.123397] pci 0000:00:07.0: PME# disabled [ 2.123419] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 2.123468] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 2.123472] pci 0000:00:08.0: PME# disabled [ 2.123494] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 2.123543] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.123547] pci 0000:00:09.0: PME# disabled [ 2.123569] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604 [ 2.123618] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 2.123622] pci 0000:00:0a.0: PME# disabled [ 2.123645] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 2.123714] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 2.123777] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 2.123843] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 2.123907] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 2.123975] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 2.124041] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 2.124104] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 2.124167] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 2.124181] pci 0000:00:16.0: reg 10: [mem 0xfbcd8000-0xfbcdbfff 64bit] [ 2.124249] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 2.124263] pci 0000:00:16.1: reg 10: [mem 0xfbcdc000-0xfbcdffff 64bit] [ 2.124329] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 2.124343] pci 0000:00:16.2: reg 10: [mem 0xfbce0000-0xfbce3fff 64bit] [ 2.124409] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 2.124422] pci 0000:00:16.3: reg 10: [mem 0xfbce4000-0xfbce7fff 64bit] [ 2.124489] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 2.124502] pci 0000:00:16.4: reg 10: [mem 0xfbce8000-0xfbcebfff 64bit] [ 2.124569] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 2.124582] pci 0000:00:16.5: reg 10: [mem 0xfbcec000-0xfbceffff 64bit] [ 2.124648] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 2.124662] pci 0000:00:16.6: reg 10: [mem 0xfbcf0000-0xfbcf3fff 64bit] [ 2.124728] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 2.124742] pci 0000:00:16.7: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] [ 2.124811] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 2.124856] pci 0000:00:1a.0: reg 20: [io 0xa400-0xa41f] [ 2.124904] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 2.124949] pci 0000:00:1a.1: reg 20: [io 0xa480-0xa49f] [ 2.125006] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 2.125028] pci 0000:00:1a.7: reg 10: [mem 0xfbcfd000-0xfbcfd3ff] [ 2.125104] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.125109] pci 0000:00:1a.7: PME# disabled [ 2.125133] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 2.125149] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] [ 2.125206] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.125210] pci 0000:00:1b.0: PME# disabled [ 2.125233] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 2.125277] pci 0000:00:1d.0: reg 20: [io 0xa800-0xa81f] [ 2.125323] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 2.125368] pci 0000:00:1d.1: reg 20: [io 0xa880-0xa89f] [ 2.125414] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 2.125459] pci 0000:00:1d.2: reg 20: [io 0xac00-0xac1f] [ 2.125505] pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03 [ 2.125550] pci 0000:00:1d.3: reg 20: [io 0xb000-0xb01f] [ 2.125605] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 2.125627] pci 0000:00:1d.7: reg 10: [mem 0xfbcfe000-0xfbcfe3ff] [ 2.125703] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.125708] pci 0000:00:1d.7: PME# disabled [ 2.125730] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.125789] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 2.125875] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003) [ 2.125880] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003) [ 2.125916] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101 [ 2.125932] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07] [ 2.125941] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883] [ 2.125949] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807] [ 2.125958] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483] [ 2.125966] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb40f] [ 2.125975] pci 0000:00:1f.2: reg 24: [io 0xb080-0xb08f] [ 2.126014] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 2.126030] pci 0000:00:1f.3: reg 10: [mem 0xfbcff000-0xfbcff0ff 64bit] [ 2.126053] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 2.126086] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101 [ 2.126103] pci 0000:00:1f.5: reg 10: [io 0xcc00-0xcc07] [ 2.126111] pci 0000:00:1f.5: reg 14: [io 0xc880-0xc883] [ 2.126120] pci 0000:00:1f.5: reg 18: [io 0xc800-0xc807] [ 2.126128] pci 0000:00:1f.5: reg 1c: [io 0xc480-0xc483] [ 2.126137] pci 0000:00:1f.5: reg 20: [io 0xc400-0xc40f] [ 2.126145] pci 0000:00:1f.5: reg 24: [io 0xc080-0xc08f] [ 2.126232] pci 0000:08:00.0: [168c:002b] type 0 class 0x000280 [ 2.126250] pci 0000:08:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 2.126318] pci 0000:08:00.0: supports D1 [ 2.126320] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 2.126325] pci 0000:08:00.0: PME# disabled [ 2.138722] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.138729] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.138780] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.138832] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.138887] pci 0000:05:00.0: [1002:68f9] type 0 class 0x000300 [ 2.138902] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.138913] pci 0000:05:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit] [ 2.138922] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff] [ 2.138936] pci 0000:05:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref] [ 2.138956] pci 0000:05:00.0: supports D1 D2 [ 2.138977] pci 0000:05:00.1: [1002:aa68] type 0 class 0x000403 [ 2.138992] pci 0000:05:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 2.139041] pci 0000:05:00.1: supports D1 D2 [ 2.158722] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.158727] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.158732] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.158739] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.158785] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.158842] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.158888] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.158935] pci 0000:01:04.0: [1102:0007] type 0 class 0x000401 [ 2.158953] pci 0000:01:04.0: reg 10: [io 0xdc00-0xdc1f] [ 2.159021] pci 0000:01:04.0: supports D1 D2 [ 2.159062] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 2.159067] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.159075] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.159077] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.159080] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.159082] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 2.159085] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 2.159087] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 2.159120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.159321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.159411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 2.159438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT] [ 2.159463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 2.159495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 2.159521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE8._PRT] [ 2.159546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 2.159571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT] [ 2.159595] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.159598] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 2.159600] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.177198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.177244] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 2.177285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) [ 2.177329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.177373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.177418] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 2.177461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 2.177505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15) [ 2.177639] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.177643] vgaarb: loaded [ 2.177644] vgaarb: bridge control possible 0000:05:00.0 [ 2.177812] SCSI subsystem initialized [ 2.177856] libata version 3.00 loaded. [ 2.177897] usbcore: registered new interface driver usbfs [ 2.177910] usbcore: registered new interface driver hub [ 2.177938] usbcore: registered new device driver usb [ 2.178050] wmi: Mapper loaded [ 2.178051] PCI: Using ACPI for IRQ routing [ 2.184494] PCI: Discovered peer bus fe [ 2.184523] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600 [ 2.184549] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600 [ 2.184577] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600 [ 2.184600] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600 [ 2.184625] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600 [ 2.184651] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600 [ 2.184675] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600 [ 2.184698] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600 [ 2.184722] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.184746] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.184771] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600 [ 2.184794] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600 [ 2.184817] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600 [ 2.184842] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600 [ 2.184868] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600 [ 2.184891] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600 [ 2.184915] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.184938] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.184964] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600 [ 2.184987] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600 [ 2.185010] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600 [ 2.185035] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600 [ 2.185506] PCI: Discovered peer bus ff [ 2.185529] pci 0000:ff:00.0: [8086:2c40] type 0 class 0x000600 [ 2.185551] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 2.185574] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 2.185595] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 2.185617] pci 0000:ff:02.4: [8086:2c14] type 0 class 0x000600 [ 2.185637] pci 0000:ff:02.5: [8086:2c15] type 0 class 0x000600 [ 2.185659] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 2.185681] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 2.185702] pci 0000:ff:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.185723] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.185746] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 2.185766] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 2.185787] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 2.185807] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 2.185830] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 2.185853] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 2.185873] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.185894] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.185917] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 2.185938] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 2.185958] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 2.185979] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 2.186460] PCI: pci_cache_line_size set to 64 bytes [ 2.186671] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 2.186674] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 2.186766] NetLabel: Initializing [ 2.186768] NetLabel: domain hash size = 128 [ 2.186769] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.186783] NetLabel: unlabeled traffic allowed by default [ 2.186836] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.186842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.186847] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.258859] Switching to clocksource hpet [ 2.267953] AppArmor: AppArmor Filesystem Enabled [ 2.267983] pnp: PnP ACPI init [ 2.267997] ACPI: bus type pnp registered [ 2.268123] pnp 00:00: [bus 00-ff] [ 2.268126] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.268128] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.268131] pnp 00:00: [io 0x0d00-0xffff window] [ 2.268133] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.268140] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.268143] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 2.268145] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 2.268229] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.268240] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 2.268242] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 2.268244] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 2.268246] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 2.268248] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 2.268250] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 2.268362] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 2.268365] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 2.268368] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 2.268371] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 2.268374] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 2.268376] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 2.268380] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.268416] pnp 00:02: [dma 4] [ 2.268418] pnp 00:02: [io 0x0000-0x000f] [ 2.268420] pnp 00:02: [io 0x0081-0x0083] [ 2.268422] pnp 00:02: [io 0x0087] [ 2.268424] pnp 00:02: [io 0x0089-0x008b] [ 2.268425] pnp 00:02: [io 0x008f] [ 2.268427] pnp 00:02: [io 0x00c0-0x00df] [ 2.268456] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.268467] pnp 00:03: [io 0x0070-0x0071] [ 2.268478] pnp 00:03: [irq 8] [ 2.268505] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.268514] pnp 00:04: [io 0x0061] [ 2.268541] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.268549] pnp 00:05: [io 0x00f0-0x00ff] [ 2.268555] pnp 00:05: [irq 13] [ 2.268588] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.268756] Switched to NOHz mode on CPU #0 [ 2.268761] Switched to NOHz mode on CPU #4 [ 2.268767] Switched to NOHz mode on CPU #5 [ 2.268784] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.268787] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.268789] pnp 00:06: [io 0x0290-0x029f] [ 2.268808] Switched to NOHz mode on CPU #7 [ 2.268812] Switched to NOHz mode on CPU #6 [ 2.268824] Switched to NOHz mode on CPU #1 [ 2.268827] Switched to NOHz mode on CPU #3 [ 2.268874] Switched to NOHz mode on CPU #2 [ 2.268887] system 00:06: [io 0x0290-0x029f] has been reserved [ 2.268891] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.268997] pnp 00:07: [io 0x0010-0x001f] [ 2.268999] pnp 00:07: [io 0x0022-0x003f] [ 2.269001] pnp 00:07: [io 0x0044-0x005f] [ 2.269003] pnp 00:07: [io 0x0062-0x0063] [ 2.269005] pnp 00:07: [io 0x0065-0x006f] [ 2.269006] pnp 00:07: [io 0x0072-0x007f] [ 2.269008] pnp 00:07: [io 0x0080] [ 2.269010] pnp 00:07: [io 0x0084-0x0086] [ 2.269012] pnp 00:07: [io 0x0088] [ 2.269013] pnp 00:07: [io 0x008c-0x008e] [ 2.269015] pnp 00:07: [io 0x0090-0x009f] [ 2.269017] pnp 00:07: [io 0x00a2-0x00bf] [ 2.269019] pnp 00:07: [io 0x00e0-0x00ef] [ 2.269021] pnp 00:07: [io 0x04d0-0x04d1] [ 2.269023] pnp 00:07: [io 0x0ca0-0x0caf] [ 2.269024] pnp 00:07: [io 0x0800-0x087f] [ 2.269026] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 2.269028] pnp 00:07: [io 0x0500-0x057f] [ 2.269036] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 2.269038] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 2.269040] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 2.269144] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 2.269147] system 00:07: [io 0x0ca0-0x0caf] has been reserved [ 2.269149] system 00:07: [io 0x0800-0x087f] has been reserved [ 2.269152] system 00:07: [io 0x0500-0x057f] has been reserved [ 2.269155] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.269158] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.269161] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 2.269165] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.269225] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 2.269257] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.269459] pnp 00:09: [io 0x03f8-0x03ff] [ 2.269466] pnp 00:09: [irq 4] [ 2.269468] pnp 00:09: [dma 0 disabled] [ 2.269542] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.269747] pnp 00:0a: [io 0x02f8-0x02ff] [ 2.269754] pnp 00:0a: [irq 3] [ 2.269756] pnp 00:0a: [dma 0 disabled] [ 2.269857] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.269927] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 2.269930] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 2.270015] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.270018] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.270022] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.270079] pnp 00:0c: [io 0x0060] [ 2.270081] pnp 00:0c: [io 0x0064] [ 2.270087] pnp 00:0c: [irq 12] [ 2.270132] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 2.270174] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 2.270259] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 2.270263] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.270422] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 2.270425] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 2.270427] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 2.270429] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 2.270431] pnp 00:0e: [mem 0xfed90000-0xffffffff] [ 2.270530] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.270533] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 2.270536] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.270539] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.270542] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 2.270545] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.270670] pnp: PnP ACPI: found 15 devices [ 2.270671] ACPI: ACPI bus type pnp unregistered [ 2.278036] PCI: max bus depth: 1 pci_try_num: 2 [ 2.278098] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.278103] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.278110] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.278119] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.278129] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.278132] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.278137] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.278141] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.278146] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.278156] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.278165] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.278175] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 2.278178] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.278197] pci 0000:00:01.0: setting latency timer to 64 [ 2.278204] pci 0000:00:02.0: setting latency timer to 64 [ 2.278211] pci 0000:00:03.0: setting latency timer to 64 [ 2.278217] pci 0000:00:07.0: setting latency timer to 64 [ 2.278224] pci 0000:00:08.0: setting latency timer to 64 [ 2.278231] pci 0000:00:09.0: setting latency timer to 64 [ 2.278237] pci 0000:00:0a.0: setting latency timer to 64 [ 2.278244] pci 0000:00:1e.0: setting latency timer to 64 [ 2.278249] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.278251] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.278254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.278256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 2.278258] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.278261] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.278263] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.278266] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.278268] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 2.278270] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.278274] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 2.278276] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 2.278278] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 2.278280] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 2.278283] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 2.278285] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.278287] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.278290] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 2.278292] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 2.278295] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 2.278297] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 2.278343] NET: Registered protocol family 2 [ 2.278609] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.279874] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.281918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.282205] TCP: Hash tables configured (established 524288 bind 65536) [ 2.282208] TCP reno registered [ 2.282223] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.282277] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.282459] NET: Registered protocol family 1 [ 2.282678] pci 0000:05:00.0: Boot video device [ 2.282755] PCI: CLS 256 bytes, default 64 [ 2.282812] Trying to unpack rootfs image as initramfs... [ 3.075757] Freeing initrd memory: 36388k freed [ 3.084928] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.084934] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000 [ 3.084937] software IO TLB at phys 0xbb77b000 - 0xbf77b000 [ 3.086515] audit: initializing netlink socket (disabled) [ 3.086531] type=2000 audit(1314239986.870:1): initialized [ 3.127044] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.174137] VFS: Disk quotas dquot_6.5.2 [ 3.174219] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.174962] fuse init (API version 7.16) [ 3.175087] msgmni has been set to 15947 [ 3.175408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.175440] io scheduler noop registered [ 3.175442] io scheduler deadline registered [ 3.175488] io scheduler cfq registered (default) [ 3.176001] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.176032] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.176132] intel_idle: MWAIT substates: 0x1120 [ 3.176148] intel_idle: v0.4 model 0x1A [ 3.176150] intel_idle: lapic_timer_reliable_states 0x2 [ 3.176290] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.176296] ACPI: Power Button [PWRB] [ 3.176335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.176339] ACPI: Power Button [PWRF] [ 3.176560] ACPI: acpi_idle yielding to intel_idle [ 3.179713] APEI: Can not request iomem region <00000000bf7b522a-00000000bf7b522c> for GARs. [ 3.179811] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 3.179867] \_SB_:_OSC evaluation returned wrong type [ 3.179869] _OSC request data:1 0 0 [ 3.179873] GHES: Failed to enable APEI firmware first mode. [ 3.179957] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.200500] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.429436] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 4.078961] Refined TSC clocksource calibration: 2133.408 MHz. [ 4.078966] Switching to clocksource tsc [ 8.389782] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.549665] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.689405] Linux agpgart interface v0.103 [ 8.690730] brd: module loaded [ 8.691376] loop: module loaded [ 8.691578] ata_piix 0000:00:1f.2: version 2.13 [ 8.691607] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.691615] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 8.691666] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 8.691894] scsi0 : ata_piix [ 8.691988] scsi1 : ata_piix [ 8.692927] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23 [ 8.692933] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23 [ 8.692961] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.692966] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 8.693005] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 8.693175] scsi2 : ata_piix [ 8.693256] scsi3 : ata_piix [ 8.694013] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 8.694018] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 8.694350] Fixed MDIO Bus: probed [ 8.694384] PPP generic driver version 2.4.2 [ 8.694428] tun: Universal TUN/TAP device driver, 1.6 [ 8.694429] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.694515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.694544] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.694567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.694570] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.694609] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 8.694641] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.698535] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 8.698550] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcfd000 [ 8.719110] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.719246] hub 1-0:1.0: USB hub found [ 8.719251] hub 1-0:1.0: 4 ports detected [ 8.719358] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.719372] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.719375] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.719419] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 8.719444] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.723316] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 8.723321] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfe000 [ 8.739111] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.739229] hub 2-0:1.0: USB hub found [ 8.739233] hub 2-0:1.0: 8 ports detected [ 8.739336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.739358] uhci_hcd: USB Universal Host Controller Interface driver [ 8.739391] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.739397] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.739400] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.739439] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.739473] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400 [ 8.739583] hub 3-0:1.0: USB hub found [ 8.739592] hub 3-0:1.0: 2 ports detected [ 8.739676] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.739682] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.739686] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.739737] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.739762] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480 [ 8.739872] hub 4-0:1.0: USB hub found [ 8.739877] hub 4-0:1.0: 2 ports detected [ 8.739958] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.739964] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.739967] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.740010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.740038] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800 [ 8.740148] hub 5-0:1.0: USB hub found [ 8.740151] hub 5-0:1.0: 2 ports detected [ 8.740241] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.740247] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.740250] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.740287] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.740320] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a880 [ 8.740431] hub 6-0:1.0: USB hub found [ 8.740434] hub 6-0:1.0: 2 ports detected [ 8.740518] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.740524] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.740527] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.740563] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 8.740587] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 [ 8.740694] hub 7-0:1.0: USB hub found [ 8.740698] hub 7-0:1.0: 2 ports detected [ 8.740779] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8.740785] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8.740788] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 8.740827] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 8.740856] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b000 [ 8.740968] hub 8-0:1.0: USB hub found [ 8.740972] hub 8-0:1.0: 2 ports detected [ 8.741109] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 8.741112] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 8.743764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.743793] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.743908] mousedev: PS/2 mouse device common for all mice [ 8.744053] rtc_cmos 00:03: RTC can wake from S4 [ 8.744156] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.744182] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.744301] device-mapper: uevent: version 1.0.3 [ 8.744388] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 8.744466] device-mapper: multipath: version 1.3.0 loaded [ 8.744468] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.744755] cpuidle: using governor ladder [ 8.745046] cpuidle: using governor menu [ 8.745048] EFI Variables Facility v0.08 2004-May-17 [ 8.745318] TCP cubic registered [ 8.745468] NET: Registered protocol family 10 [ 8.746122] NET: Registered protocol family 17 [ 8.746139] Registering the dns_resolver key type [ 8.746566] PM: Hibernation image not present or could not be loaded. [ 8.746582] registered taskstats version 1 [ 8.770074] Magic number: 7:233:663 [ 8.770179] processor LNXCPU:12: hash matches [ 8.770406] rtc_cmos 00:03: setting system clock to 2011-08-25 02:39:52 UTC (1314239992) [ 8.774004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.774006] EDD information not available. [ 9.050255] ata4: SATA link down (SStatus 0 SControl 300) [ 9.061173] ata3: SATA link down (SStatus 0 SControl 300) [ 9.119286] usb 2-2: new high speed USB device number 3 using ehci_hcd [ 9.559349] usb 5-1: new low speed USB device number 2 using uhci_hcd [ 9.559357] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.559375] ata2.01: SATA link down (SStatus 0 SControl 300) [ 9.559388] ata2.01: link offline, clearing class 3 to NONE [ 9.559513] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.559525] ata1.01: SATA link down (SStatus 0 SControl 300) [ 9.579686] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 [ 9.579933] ata1.00: ATA-8: ST31000524AS, JC45, max UDMA/133 [ 9.579938] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 9.619609] ata2.00: configured for UDMA/100 [ 9.619828] ata1.00: configured for UDMA/133 [ 9.620241] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5 [ 9.620636] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.620710] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.620767] sd 0:0:0:0: [sda] Write Protect is off [ 9.620770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.620790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.622471] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 [ 9.625077] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.625082] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.625288] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.625564] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.663045] sda: sda1 sda2 < sda5 > [ 9.664248] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.666886] Freeing unused kernel memory: 824k freed [ 9.667067] Write protecting the kernel read-only data: 12288k [ 9.675944] Freeing unused kernel memory: 1840k freed [ 9.682638] Freeing unused kernel memory: 1380k freed [ 9.707389] udev[104]: starting version 167 [ 9.746374] [drm] Initialized drm 1.1.0 20060810 [ 9.774272] [drm] radeon defaulting to kernel modesetting. [ 9.774276] [drm] radeon kernel modesetting enabled. [ 9.774391] radeon 0000:05:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 9.774397] radeon 0000:05:00.0: setting latency timer to 64 [ 9.774803] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340). [ 9.774850] [drm] register mmio base: 0xFBDC0000 [ 9.774852] [drm] register mmio size: 131072 [ 9.775015] ATOM BIOS: 113 [ 9.775091] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 9.775094] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 9.775101] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 9.775103] [drm] Detected VRAM RAM=1024M, BAR=256M [ 9.775105] [drm] RAM width 64bits DDR [ 9.775436] [TTM] Zone kernel: Available graphics memory: 4084574 kiB. [ 9.775438] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 9.775440] [TTM] Initializing pool allocator. [ 9.775464] [drm] radeon: 1024M of VRAM memory ready [ 9.775466] [drm] radeon: 512M of GTT memory ready. [ 9.775479] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.775481] [drm] Driver supports precise vblank timestamp query. [ 9.775520] radeon 0000:05:00.0: irq 64 for MSI/MSI-X [ 9.775526] radeon 0000:05:00.0: radeon: using MSI. [ 9.775562] [drm] radeon: irq initialized. [ 9.775567] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 9.776309] [drm] Loading CEDAR Microcode [ 9.784540] radeon 0000:05:00.0: WB enabled [ 9.801366] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 9.801418] [drm] ring test succeeded in 1 usecs [ 9.801564] [drm] radeon: ib pool ready. [ 9.801716] [drm] ib test succeeded in 0 usecs [ 9.801724] failed to evaluate ATIF got AE_BAD_PARAMETER [ 9.801826] generic-usb 0003:05D5:0624.0001: input,hidraw0: USB HID v1.10 Keyboard [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input0 [ 9.801999] [drm] Radeon Display Connectors [ 9.802001] [drm] Connector 0: [ 9.802003] [drm] HDMI-A [ 9.802004] [drm] HPD1 [ 9.802006] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 9.802008] [drm] Encoders: [ 9.802009] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.802011] [drm] Connector 1: [ 9.802012] [drm] DVI-I [ 9.802013] [drm] HPD4 [ 9.802015] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 9.802017] [drm] Encoders: [ 9.802018] [drm] DFP2: INTERNAL_UNIPHY [ 9.802020] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.802021] [drm] Connector 2: [ 9.802023] [drm] VGA [ 9.802025] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 9.802026] [drm] Encoders: [ 9.802028] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 9.812110] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 9.817362] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 [ 9.817662] generic-usb 0003:05D5:0624.0002: input,hidraw1: USB HID v1.10 Device [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input1 [ 9.817676] usbcore: registered new interface driver usbhid [ 9.817678] usbhid: USB HID core driver [ 9.866563] [drm] Radeon display connector DVI-I-1: Found valid EDID [ 9.876425] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 9.876449] [drm] Internal thermal controller with fan control [ 9.876496] [drm] radeon: power management initialized [ 9.889478] parse error at position 5 in video mode 'vesafb' [ 9.889480] parse error at position 5 in video mode 'vesafb' [ 9.889482] parse error at position 5 in video mode 'vesafb' [ 9.964580] [drm] fb mappable at 0xD0141000 [ 9.964582] [drm] vram apper at 0xD0000000 [ 9.964583] [drm] size 7299072 [ 9.964585] [drm] fb depth is 24 [ 9.964586] [drm] pitch is 6912 [ 9.964740] fbcon: radeondrmfb (fb0) is primary device [ 10.440506] Console: switching to colour frame buffer device 210x65 [ 10.444852] fb0: radeondrmfb frame buffer device [ 10.444854] drm: registered panic notifier [ 10.444860] [drm] Initialized radeon 2.11.0 20080528 for 0000:05:00.0 on minor 0 [ 10.848150] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.928559] udev[429]: starting version 167 [ 13.059896] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.061842] type=1400 audit(1314239997.784:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=738 comm="apparmor_parser" [ 14.061906] type=1400 audit(1314239997.784:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser" [ 14.061961] type=1400 audit(1314239997.784:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser" [ 14.112169] dca service started, version 1.12.1 [ 14.359243] EDAC MC: Ver: 2.1.0 [ 14.486362] Linux video capture interface: v2.00 [ 14.787629] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0 [ 14.787648] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED) [ 14.787687] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 14.787696] EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 14.787699] EDAC i7core: Driver loaded. [ 14.805234] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 14.807046] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input4 [ 14.807212] usbcore: registered new interface driver uvcvideo [ 14.807215] USB Video Class driver (1.1.1) [ 14.887745] cfg80211: Calling CRDA to update world regulatory domain [ 15.192969] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 15.193048] ioatdma 0000:00:16.0: enabling device (0000 -> 0002) [ 15.193070] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 15.193103] ioatdma 0000:00:16.0: setting latency timer to 64 [ 15.193145] ioatdma 0000:00:16.0: irq 65 for MSI/MSI-X [ 15.193576] ioatdma 0000:00:16.1: enabling device (0000 -> 0002) [ 15.193595] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 15.193632] ioatdma 0000:00:16.1: setting latency timer to 64 [ 15.193674] ioatdma 0000:00:16.1: irq 66 for MSI/MSI-X [ 15.193989] ioatdma 0000:00:16.2: enabling device (0000 -> 0002) [ 15.194000] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 15.194020] ioatdma 0000:00:16.2: setting latency timer to 64 [ 15.194056] ioatdma 0000:00:16.2: irq 67 for MSI/MSI-X [ 15.194289] ioatdma 0000:00:16.3: enabling device (0000 -> 0002) [ 15.194300] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 15.194320] ioatdma 0000:00:16.3: setting latency timer to 64 [ 15.194355] ioatdma 0000:00:16.3: irq 68 for MSI/MSI-X [ 15.194613] ioatdma 0000:00:16.4: enabling device (0000 -> 0002) [ 15.194618] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 15.194638] ioatdma 0000:00:16.4: setting latency timer to 64 [ 15.194674] ioatdma 0000:00:16.4: irq 69 for MSI/MSI-X [ 15.194899] ioatdma 0000:00:16.5: enabling device (0000 -> 0002) [ 15.194904] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 15.194924] ioatdma 0000:00:16.5: setting latency timer to 64 [ 15.194960] ioatdma 0000:00:16.5: irq 70 for MSI/MSI-X [ 15.195182] ioatdma 0000:00:16.6: enabling device (0000 -> 0002) [ 15.195188] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 15.195207] ioatdma 0000:00:16.6: setting latency timer to 64 [ 15.195243] ioatdma 0000:00:16.6: irq 71 for MSI/MSI-X [ 15.195471] ioatdma 0000:00:16.7: enabling device (0000 -> 0002) [ 15.195476] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 15.195497] ioatdma 0000:00:16.7: setting latency timer to 64 [ 15.195536] ioatdma 0000:00:16.7: irq 72 for MSI/MSI-X [ 15.350721] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 15.895672] lp: driver loaded but no devices found [ 16.206286] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 16.332808] ipmi message handler version 39.2 [ 16.379829] ipmi device interface [ 16.552578] IPMI System Interface driver. [ 16.552641] ipmi_si: probing via SMBIOS [ 16.552644] ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0 [ 16.552646] ipmi_si: Adding SMBIOS-specified kcs state machine [ 16.552650] ipmi_si: probing via SPMI [ 16.552652] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 16.552654] ipmi_si: Adding SPMI-specified kcs state machine [ 16.552657] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0 [ 16.552661] ipmi_si: Could not set up I/O space [ 16.594869] snd_ca0106 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.594889] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 16.629777] ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 16.629787] ipmi_si: Interface detection failed [ 16.848439] ath9k 0000:08:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 16.848450] ath9k 0000:08:00.0: setting latency timer to 64 [ 16.898263] ath: EEPROM regdomain: 0x809c [ 16.898266] ath: EEPROM indicates we should expect a country code [ 16.898268] ath: doing EEPROM country->regdmn map search [ 16.898270] ath: country maps to regdmn code: 0x52 [ 16.898272] ath: Country alpha2 being used: CN [ 16.898273] ath: Regpair used: 0x52 [ 16.898276] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 16.898279] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898281] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 16.898284] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898286] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 16.898289] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898291] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 16.898293] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898295] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 16.898298] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898300] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 16.898303] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898305] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 16.898307] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898309] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 16.898312] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898314] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 16.898317] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898319] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 16.898321] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898323] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 16.898326] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 16.898328] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 16.898330] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 16.898333] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 16.900242] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 16.900245] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900247] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 16.900250] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900252] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 16.900255] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900257] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 16.900260] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900262] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 16.900264] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900267] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 16.900269] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900271] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 16.900274] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900276] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 16.900279] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900281] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 16.900283] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900285] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 16.900288] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900290] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 16.900293] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900295] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 16.900298] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900300] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 16.900302] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 16.900305] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 16.900307] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.032580] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 17.033286] Registered led device: ath9k-phy0 [ 17.033291] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011920000, irq=28 [ 17.034752] cfg80211: Pending regulatory request, waiting for it to be processed... [ 17.141690] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.141694] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141697] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.141699] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141702] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.141704] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141706] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.141709] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141711] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.141714] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141716] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.141719] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141721] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.141723] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141725] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.141728] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141730] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.141733] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141735] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.141738] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141740] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.141742] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141744] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.141747] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141749] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.141752] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141754] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 17.141756] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.141760] cfg80211: World regulatory domain updated: [ 17.141761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.141764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.141767] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.141769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.141771] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.141774] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.141790] cfg80211: Calling CRDA for country: CN [ 17.145822] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.145826] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145829] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.145831] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145834] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.145836] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145838] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.145841] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145843] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.145845] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145847] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.145850] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145852] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.145855] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145857] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.145859] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145862] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.145864] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145866] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.145869] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145871] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.145874] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145876] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.145878] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145880] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.145883] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.145885] cfg80211: Disabling freq 2484 MHz [ 17.145888] cfg80211: Regulatory domain changed to country: CN [ 17.145889] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.145892] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 17.145894] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 17.540112] coretemp coretemp.0: TjMax is 97 C. [ 17.540325] coretemp coretemp.0: TjMax is 97 C. [ 17.540430] coretemp coretemp.0: TjMax is 97 C. [ 17.540552] coretemp coretemp.0: TjMax is 97 C. [ 17.540612] coretemp coretemp.4: TjMax is 97 C. [ 17.540648] coretemp coretemp.4: TjMax is 97 C. [ 17.540667] coretemp coretemp.4: TjMax is 97 C. [ 17.540885] coretemp coretemp.4: TjMax is 97 C. [ 17.665032] w83627ehf: Found W83667HG chip at 0x290 [ 17.813595] type=1400 audit(1314240001.534:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1045 comm="apparmor_parser" [ 17.868999] type=1400 audit(1314240001.584:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1052 comm="apparmor_parser" [ 17.899483] i2c i2c-8: Found w83795adg rev. B at 0x2f [ 17.954498] type=1400 audit(1314240001.674:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1051 comm="apparmor_parser" [ 17.964095] type=1400 audit(1314240001.684:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1046 comm="apparmor_parser" [ 17.964164] type=1400 audit(1314240001.684:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" [ 17.964221] type=1400 audit(1314240001.684:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1046 comm="apparmor_parser" [ 18.029531] type=1400 audit(1314240001.744:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1049 comm="apparmor_parser" [ 18.159619] w83795 8-002f: PECI agent 1 Tbase temperature: 85 [ 18.179605] w83795 8-002f: PECI agent 2 Tbase temperature: 85 [ 18.652543] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 18.652617] snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X [ 18.652648] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 18.729527] hda-intel: no codecs found! [ 18.729614] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 18.729683] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 18.730239] snd_hda_intel 0000:05:00.1: irq 73 for MSI/MSI-X [ 18.730268] snd_hda_intel 0000:05:00.1: setting latency timer to 64 [ 18.901195] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 18.901648] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:07.0/0000:05:00.1/sound/card1/input6 [ 19.749969] ppdev: user-space parallel port driver [ 20.371271] audit_printk_skb: 6 callbacks suppressed [ 20.371274] type=1400 audit(1314240004.094:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1106 comm="apparmor_parser" [ 20.371408] type=1400 audit(1314240004.094:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1106 comm="apparmor_parser" [ 20.451043] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.749025] Adding 19529724k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:19529724k [ 23.072159] wlan0: authenticate with 00:26:b8:18:ff:90 (try 1) [ 23.074171] wlan0: authenticated [ 23.074197] wlan0: associate with 00:26:b8:18:ff:90 (try 1) [ 23.078339] wlan0: RX AssocResp from 00:26:b8:18:ff:90 (capab=0x431 status=0 aid=3) [ 23.078343] wlan0: associated [ 23.079230] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 23.280067] cfg80211: Calling CRDA for country: US [ 23.284023] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.284027] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284030] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.284033] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284035] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.284038] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284040] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.284042] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284044] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.284047] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284049] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.284052] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284054] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.284056] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284058] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.284061] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284063] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.284066] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284068] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.284070] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284073] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.284075] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.284077] cfg80211: Disabling freq 2467 MHz [ 23.284079] cfg80211: Disabling freq 2472 MHz [ 23.284080] cfg80211: Disabling freq 2484 MHz [ 23.284083] cfg80211: Regulatory domain changed to country: US [ 23.284085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.284088] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.284090] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 23.284092] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.284095] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.284097] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.284100] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 23.620473] type=1400 audit(1314240007.344:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1047 comm="apparmor_parser" [ 23.621328] type=1400 audit(1314240007.344:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1047 comm="apparmor_parser" [ 23.621708] type=1400 audit(1314240007.344:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1047 comm="apparmor_parser" ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-25 2:45 ` Pavel Ivanov @ 2011-08-26 4:13 ` Huang Ying 2011-08-26 13:43 ` Bjorn Helgaas 2011-08-27 3:28 ` Pavel Ivanov 0 siblings, 2 replies; 27+ messages in thread From: Huang Ying @ 2011-08-26 4:13 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 535 bytes --] Hi, Pavel, Sorry, there is a minor issue in the patch. Do you have time to try the updated version attached. Best Regards, Haung Ying On 08/25/2011 10:45 AM, Pavel Ivanov wrote: > Huang, > > Applying of your patches didn't help. I'm attaching new dmesg in case > if you need it. > > > Pavel > > > On Mon, Aug 22, 2011 at 3:12 AM, Huang Ying <ying.huang@intel.com> wrote: >> Hi, Pavel, >> >> Do you have time to try the patch attached with the mail? >> acpi_nvs.patch should go first. >> >> Best Regards, >> Huang Ying >> >> [-- Attachment #2: acpi_nvs.patch --] [-- Type: text/x-patch, Size: 4552 bytes --] Subject: [PATCH] ACPI, Record ACPI NVS regions Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mechanism. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch record ACPI NVS regions, so that we can avoid request resources for memory region inside it. Signed-off-by: Huang Ying <ying.huang@intel.com> --- arch/x86/kernel/e820.c | 4 +-- drivers/acpi/Makefile | 3 +- drivers/acpi/nvs.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++- include/linux/acpi.h | 20 ++++++++++++------ 4 files changed, 70 insertions(+), 10 deletions(-) --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -713,7 +713,7 @@ void __init e820_mark_nosave_regions(uns } #endif -#ifdef CONFIG_HIBERNATION +#ifdef CONFIG_ACPI /** * Mark ACPI NVS memory region, so that we can save/restore it during * hibernation and the subsequent resume. @@ -726,7 +726,7 @@ static int __init e820_mark_nvs_memory(v struct e820entry *ei = &e820.map[i]; if (ei->type == E820_NVS) - suspend_nvs_register(ei->addr, ei->size); + acpi_nvs_register(ei->addr, ei->size); } return 0; --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -20,11 +20,12 @@ obj-y += acpi.o \ # All the builtin files are in the "acpi." module_param namespace. acpi-y += osl.o utils.o reboot.o acpi-y += atomicio.o +acpi-y += nvs.o # sleep related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_ACPI_SLEEP) += proc.o nvs.o +acpi-$(CONFIG_ACPI_SLEEP) += proc.o # --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -15,6 +15,56 @@ #include <linux/acpi_io.h> #include <acpi/acpiosxf.h> +/* ACPI NVS regions, APEI may use it */ + +struct nvs_region { + __u64 phys_start; + __u64 size; + struct list_head node; +}; + +static LIST_HEAD(nvs_region_list); + +#ifdef CONFIG_ACPI_SLEEP +static int suspend_nvs_register(unsigned long start, unsigned long size); +#else +static inline int suspend_nvs_register(unsigned long a, unsigned long b) +{ + return 0; +} +#endif + +int acpi_nvs_register(__u64 start, __u64 size) +{ + struct nvs_region *region; + + region = kmalloc(sizeof(*region), GFP_KERNEL); + if (!region) + return -ENOMEM; + region->phys_start = start; + region->size = size; + list_add_tail(®ion->node, &nvs_region_list); + + return suspend_nvs_register(start, size); +} + +int acpi_nvs_for_each_region(int (*func)(__u64 start, __u64 size, void *data), + void *data) +{ + int rc; + struct nvs_region *region; + + list_for_each_entry(region, &nvs_region_list, node) { + rc = func(region->phys_start, region->size, data); + if (rc) + return rc; + } + + return 0; +} + + +#ifdef CONFIG_ACPI_SLEEP /* * Platforms, like ACPI, may want us to save some memory used by them during * suspend and to restore the contents of this memory during the subsequent @@ -41,7 +91,7 @@ static LIST_HEAD(nvs_list); * things so that the data from page-aligned addresses in this region will * be copied into separate RAM pages. */ -int suspend_nvs_register(unsigned long start, unsigned long size) +static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; @@ -159,3 +209,4 @@ void suspend_nvs_restore(void) if (entry->data) memcpy(entry->kaddr, entry->data, entry->size); } +#endif --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -306,6 +306,11 @@ extern acpi_status acpi_pci_osc_control_ u32 *mask, u32 req); extern void acpi_early_init(void); +extern int acpi_nvs_register(__u64 start, __u64 size); + +extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data); + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -348,15 +353,18 @@ static inline int acpi_table_parse(char { return -1; } -#endif /* !CONFIG_ACPI */ -#ifdef CONFIG_ACPI_SLEEP -int suspend_nvs_register(unsigned long start, unsigned long size); -#else -static inline int suspend_nvs_register(unsigned long a, unsigned long b) +static inline int acpi_nvs_register(__u64 start, __u64 size) { return 0; } -#endif + +static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data) +{ + return 0; +} + +#endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ [-- Attachment #3: nvs_exclude.patch --] [-- Type: text/x-patch, Size: 2556 bytes --] Subject: [BUGFIX] ACPI, APEI, Resolve false conflict between ACPI NVS and APEI Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mech. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch excludes ACPI NVS regions when APEI components request resources. So that they will not conflict with ACPI NVS regions. Reported-by: Pavel Ivanov <paivanof@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> --- drivers/acpi/apei/apei-base.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -438,8 +438,19 @@ int apei_resources_sub(struct apei_resou } EXPORT_SYMBOL_GPL(apei_resources_sub); +static int apei_get_nvs_callback(__u64 start, __u64 size, void *data) +{ + struct apei_resources *resources = data; + return apei_res_add(&resources->iomem, start, size); +} + +static int apei_get_nvs_resources(struct apei_resources *resources) +{ + return acpi_nvs_for_each_region(apei_get_nvs_callback, resources); +} + /* - * IO memory/port rersource management mechanism is used to check + * IO memory/port resource management mechanism is used to check * whether memory/port area used by GARs conflicts with normal memory * or IO memory/port of devices. */ @@ -448,12 +459,26 @@ int apei_resources_request(struct apei_r { struct apei_res *res, *res_bak = NULL; struct resource *r; + struct apei_resources nvs_resources; int rc; rc = apei_resources_sub(resources, &apei_resources_all); if (rc) return rc; + /* + * Some firmware uses ACPI NVS region, that has been marked as + * busy, so exclude it from APEI resources to avoid false + * conflict. + */ + apei_resources_init(&nvs_resources); + rc = apei_get_nvs_resources(&nvs_resources); + if (rc) + goto res_fini; + rc = apei_resources_sub(resources, &nvs_resources); + if (rc) + goto res_fini; + rc = -EINVAL; list_for_each_entry(res, &resources->iomem, list) { r = request_mem_region(res->start, res->end - res->start, @@ -500,6 +525,8 @@ err_unmap_iomem: break; release_mem_region(res->start, res->end - res->start); } +res_fini: + apei_resources_fini(&nvs_resources); return rc; } EXPORT_SYMBOL_GPL(apei_resources_request); ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-26 4:13 ` Huang Ying @ 2011-08-26 13:43 ` Bjorn Helgaas 2011-08-27 3:28 ` Pavel Ivanov 1 sibling, 0 replies; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-26 13:43 UTC (permalink / raw) To: Huang Ying; +Cc: Pavel Ivanov, linux-kernel, linux-acpi On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: > Hi, Pavel, > > Sorry, there is a minor issue in the patch. Do you have time to try > the updated version attached. I think Yinghai's patch is a better approach (though it needs a changelog). The ACPI NVS space should not be marked as "busy" by the e820 code in the iomem_resource tree. It's way too complicated to mess around with registering NVS space and trying to deal with it specially in APEI. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs @ 2011-08-26 13:43 ` Bjorn Helgaas 0 siblings, 0 replies; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-26 13:43 UTC (permalink / raw) To: Huang Ying; +Cc: Pavel Ivanov, linux-kernel, linux-acpi On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: > Hi, Pavel, > > Sorry, there is a minor issue in the patch. Do you have time to try > the updated version attached. I think Yinghai's patch is a better approach (though it needs a changelog). The ACPI NVS space should not be marked as "busy" by the e820 code in the iomem_resource tree. It's way too complicated to mess around with registering NVS space and trying to deal with it specially in APEI. Bjorn ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-26 13:43 ` Bjorn Helgaas (?) @ 2011-08-29 1:27 ` Huang Ying 2011-08-29 14:48 ` Bjorn Helgaas -1 siblings, 1 reply; 27+ messages in thread From: Huang Ying @ 2011-08-29 1:27 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Pavel Ivanov, linux-kernel, linux-acpi, Brown, Len On 08/26/2011 09:43 PM, Bjorn Helgaas wrote: > On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: >> Hi, Pavel, >> >> Sorry, there is a minor issue in the patch. Do you have time to try >> the updated version attached. > > I think Yinghai's patch is a better approach (though it needs a changelog). > > The ACPI NVS space should not be marked as "busy" by the e820 code in > the iomem_resource tree. > > It's way too complicated to mess around with registering NVS space and > trying to deal with it specially in APEI. ACPI NVS is different, it can be used only by firmware, and its interpreter, such as ACPI AML interpreter and APEI interpreter. It can not be used by ordinary driver. If my understanding is correct, this is why ACPI NVS is marked as busy. Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 1:27 ` Huang Ying @ 2011-08-29 14:48 ` Bjorn Helgaas 0 siblings, 0 replies; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-29 14:48 UTC (permalink / raw) To: Huang Ying; +Cc: Pavel Ivanov, linux-kernel, linux-acpi, Brown, Len On Sun, Aug 28, 2011 at 7:27 PM, Huang Ying <ying.huang@intel.com> wrote: > On 08/26/2011 09:43 PM, Bjorn Helgaas wrote: >> On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: >>> Hi, Pavel, >>> >>> Sorry, there is a minor issue in the patch. Do you have time to try >>> the updated version attached. >> >> I think Yinghai's patch is a better approach (though it needs a changelog). >> >> The ACPI NVS space should not be marked as "busy" by the e820 code in >> the iomem_resource tree. >> >> It's way too complicated to mess around with registering NVS space and >> trying to deal with it specially in APEI. > > ACPI NVS is different, it can be used only by firmware, and its > interpreter, such as ACPI AML interpreter and APEI interpreter. It can > not be used by ordinary driver. If my understanding is correct, this is > why ACPI NVS is marked as busy. I don't understand why ACPI NVS is different. If we reserve it in iomem_resource (without marking it busy), it's already unavailable to anything else unless you know something connected to the NVS region. The only way to allocate space inside NVS is to first discover the ACPI NVS resource, so you could pass it to request_resource() or allocate_resource() as the "root" to allocate from. There's no mechanism for locating that resource, so it's already protected in that sense. To use request_mem_region() (which marks the region busy), you all you need is an address. The only way for a driver to learn an address inside NVS is from the ACPI tables. So I think it's effectively limited to APEI there, too. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs @ 2011-08-29 14:48 ` Bjorn Helgaas 0 siblings, 0 replies; 27+ messages in thread From: Bjorn Helgaas @ 2011-08-29 14:48 UTC (permalink / raw) To: Huang Ying; +Cc: Pavel Ivanov, linux-kernel, linux-acpi, Brown, Len On Sun, Aug 28, 2011 at 7:27 PM, Huang Ying <ying.huang@intel.com> wrote: > On 08/26/2011 09:43 PM, Bjorn Helgaas wrote: >> On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: >>> Hi, Pavel, >>> >>> Sorry, there is a minor issue in the patch. Do you have time to try >>> the updated version attached. >> >> I think Yinghai's patch is a better approach (though it needs a changelog). >> >> The ACPI NVS space should not be marked as "busy" by the e820 code in >> the iomem_resource tree. >> >> It's way too complicated to mess around with registering NVS space and >> trying to deal with it specially in APEI. > > ACPI NVS is different, it can be used only by firmware, and its > interpreter, such as ACPI AML interpreter and APEI interpreter. It can > not be used by ordinary driver. If my understanding is correct, this is > why ACPI NVS is marked as busy. I don't understand why ACPI NVS is different. If we reserve it in iomem_resource (without marking it busy), it's already unavailable to anything else unless you know something connected to the NVS region. The only way to allocate space inside NVS is to first discover the ACPI NVS resource, so you could pass it to request_resource() or allocate_resource() as the "root" to allocate from. There's no mechanism for locating that resource, so it's already protected in that sense. To use request_mem_region() (which marks the region busy), you all you need is an address. The only way for a driver to learn an address inside NVS is from the ACPI tables. So I think it's effectively limited to APEI there, too. Bjorn ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 14:48 ` Bjorn Helgaas (?) @ 2011-08-30 0:57 ` Huang Ying -1 siblings, 0 replies; 27+ messages in thread From: Huang Ying @ 2011-08-30 0:57 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Pavel Ivanov, linux-kernel, linux-acpi, Brown, Len On 08/29/2011 10:48 PM, Bjorn Helgaas wrote: > On Sun, Aug 28, 2011 at 7:27 PM, Huang Ying <ying.huang@intel.com> wrote: >> On 08/26/2011 09:43 PM, Bjorn Helgaas wrote: >>> On Thu, Aug 25, 2011 at 10:13 PM, Huang Ying <ying.huang@intel.com> wrote: >>>> Hi, Pavel, >>>> >>>> Sorry, there is a minor issue in the patch. Do you have time to try >>>> the updated version attached. >>> >>> I think Yinghai's patch is a better approach (though it needs a changelog). >>> >>> The ACPI NVS space should not be marked as "busy" by the e820 code in >>> the iomem_resource tree. >>> >>> It's way too complicated to mess around with registering NVS space and >>> trying to deal with it specially in APEI. >> >> ACPI NVS is different, it can be used only by firmware, and its >> interpreter, such as ACPI AML interpreter and APEI interpreter. It can >> not be used by ordinary driver. If my understanding is correct, this is >> why ACPI NVS is marked as busy. > > I don't understand why ACPI NVS is different. If we reserve it in > iomem_resource (without marking it busy), it's already unavailable to > anything else unless you know something connected to the NVS region. I think ACPI NVS can be seen as reserved by ACPI or firmware interpreter. So that, all other drivers should not access it. Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-26 4:13 ` Huang Ying 2011-08-26 13:43 ` Bjorn Helgaas @ 2011-08-27 3:28 ` Pavel Ivanov 2011-08-29 1:15 ` Huang Ying 2011-08-29 5:37 ` Huang Ying 1 sibling, 2 replies; 27+ messages in thread From: Pavel Ivanov @ 2011-08-27 3:28 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 1087 bytes --] Huang, I can confirm that new patch got rid of the old error message but introduced a new one: ERST: Failed to get Error Log Address Range Also I noticed there's another suspicious message in dmesg and it was there earlier too (although it's not shown on console): GHES: Failed to enable APEI firmware first mode Is it bad? What does it mean? I'm attaching new dmesg for you. Pavel On Fri, Aug 26, 2011 at 12:13 AM, Huang Ying <ying.huang@intel.com> wrote: > Hi, Pavel, > > Sorry, there is a minor issue in the patch. Do you have time to try > the updated version attached. > > Best Regards, > Haung Ying > > On 08/25/2011 10:45 AM, Pavel Ivanov wrote: >> Huang, >> >> Applying of your patches didn't help. I'm attaching new dmesg in case >> if you need it. >> >> >> Pavel >> >> >> On Mon, Aug 22, 2011 at 3:12 AM, Huang Ying <ying.huang@intel.com> wrote: >>> Hi, Pavel, >>> >>> Do you have time to try the patch attached with the mail? >>> acpi_nvs.patch should go first. >>> >>> Best Regards, >>> Huang Ying >>> >>> > > [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 81667 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-rc3-mods (pivanof@PavelComp) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #9 SMP PREEMPT Fri Aug 26 22:55:07 EDT 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/Z8NA-D6(C), BIOS 1002 06/28/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 0200000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 base 00BF800000 mask FFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 23fff6000-240000000 [ 0.000000] RAMDISK: 338be000 - 35c57000 [ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf798540 00128 (v01 062810 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000bf798670 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79fcb0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: EINJ 00000000bf7986b0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000bf798840 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000bf798870 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000bf798a20 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] SRAT: Node 1 PXM 1 140000000-240000000 [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffe000 - 000000013fffffff] [ 0.000000] Initmem setup node 1 0000000140000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffe000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013be00000-ffff88013fdfffff] on node 0 [ 0.000000] [ffffea0005000000-ffffea0008ffffff] PMD -> [ffff88023b600000-ffff88023f5fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] 1: 0x00140000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 1046287 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 24 Processors exceeds NR_CPUS limit of 16 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000 [ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000 [ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s81664 r8192 d20736 u262144 [ 0.000000] pcpu-alloc: s81664 r8192 d20736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2057994 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8128652k/9437184k available (6332k kernel code, 1057732k absent, 250800k reserved, 6738k data, 824k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1216 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2133.786 MHz processor. [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4267.57 BogoMIPS (lpj=21337860) [ 0.000012] pid_max: default: 32768 minimum: 301 [ 0.000064] Security Framework initialized [ 0.000079] AppArmor: AppArmor initialized [ 0.000920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003388] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004344] Mount-cache hash table entries: 256 [ 0.004544] Initializing cgroup subsys cpuacct [ 0.004550] Initializing cgroup subsys memory [ 0.004577] Initializing cgroup subsys devices [ 0.004579] Initializing cgroup subsys freezer [ 0.004581] Initializing cgroup subsys net_cls [ 0.004583] Initializing cgroup subsys blkio [ 0.004628] CPU: Physical Processor ID: 0 [ 0.004630] CPU: Processor Core ID: 0 [ 0.004635] mce: CPU supports 9 MCE banks [ 0.004648] CPU0: Thermal monitoring enabled (TM1) [ 0.004658] using mwait in idle threads. [ 0.005804] ACPI: Core revision 20110623 [ 0.032829] ftrace: allocating 23820 entries in 94 pages [ 0.042423] Switched APIC routing to physical flat. [ 0.042888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142713] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 0.278232] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.278234] APIC delta adjusted to PM-Timer: 833361 (1000032) [ 0.278240] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.278249] ... version: 3 [ 0.278251] ... bit width: 48 [ 0.278252] ... generic registers: 4 [ 0.278254] ... value mask: 0000ffffffffffff [ 0.278256] ... max period: 000000007fffffff [ 0.278257] ... fixed-purpose events: 3 [ 0.278259] ... event mask: 000000070000000f [ 0.338852] NMI watchdog enabled, takes one hw-pmu counter. [ 0.417967] Booting Node 0, Processors #1 [ 0.417970] smpboot cpu 1: start_ip = 9a000 [ 0.597666] NMI watchdog enabled, takes one hw-pmu counter. [ 0.657489] #2 [ 0.657491] smpboot cpu 2: start_ip = 9a000 [ 0.837214] NMI watchdog enabled, takes one hw-pmu counter. [ 0.896985] #3 [ 0.896987] smpboot cpu 3: start_ip = 9a000 [ 1.076667] NMI watchdog enabled, takes one hw-pmu counter. [ 1.136514] Ok. [ 1.136516] Booting Node 1, Processors #4 [ 1.136520] smpboot cpu 4: start_ip = 9a000 [ 1.316207] NMI watchdog enabled, takes one hw-pmu counter. [ 1.376011] #5 [ 1.376014] smpboot cpu 5: start_ip = 9a000 [ 1.555763] NMI watchdog enabled, takes one hw-pmu counter. [ 1.615518] #6 [ 1.615521] smpboot cpu 6: start_ip = 9a000 [ 1.795211] NMI watchdog enabled, takes one hw-pmu counter. [ 1.855032] #7 [ 1.855034] smpboot cpu 7: start_ip = 9a000 [ 2.034764] NMI watchdog enabled, takes one hw-pmu counter. [ 2.054605] Brought up 8 CPUs [ 2.054609] Total of 8 processors activated (34135.24 BogoMIPS). [ 2.058607] devtmpfs: initialized [ 2.058799] PM: Registering ACPI NVS region at bf79e000 (204800 bytes) [ 2.059688] print_constraints: dummy: [ 2.059719] RTC time: 3:07:49, date: 08/27/11 [ 2.059764] NET: Registered protocol family 16 [ 2.059866] ACPI: bus type pci registered [ 2.059924] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.059927] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 2.100377] PCI: Using configuration type 1 for base access [ 2.101326] bio: create slab <bio-0> at 0 [ 2.101429] ACPI: Added _OSI(Module Device) [ 2.101431] ACPI: Added _OSI(Processor Device) [ 2.101433] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.101435] ACPI: Added _OSI(Processor Aggregator Device) [ 2.103090] ACPI: EC: Look up EC in DSDT [ 2.103369] \_SB_:_OSC evaluation returned wrong type [ 2.103372] _OSC request data:1 16 [ 2.104881] ACPI: Executed 1 blocks of module-level executable AML code [ 2.107908] ACPI: SSDT 00000000bf79e0c0 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.108423] ACPI: Dynamic OEM Table Load: [ 2.108426] ACPI: SSDT (null) 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.108528] ACPI: SSDT 00000000bf79f270 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.108970] ACPI: Dynamic OEM Table Load: [ 2.108973] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.109052] ACPI: SSDT 00000000bf79f8f0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.109520] ACPI: Dynamic OEM Table Load: [ 2.109523] ACPI: SSDT (null) 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.110082] ACPI: Interpreter enabled [ 2.110085] ACPI: (supports S0 S1 S4 S5) [ 2.110103] ACPI: Using IOAPIC for interrupt routing [ 2.117367] ACPI: No dock devices found. [ 2.117394] HEST: Table parsing has been initialized. [ 2.117398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.117483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.117641] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 2.117643] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 2.117646] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.117648] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 2.117651] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 2.117653] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 2.117670] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 2.117720] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.117724] pci 0000:00:00.0: PME# disabled [ 2.117753] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 2.117803] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.117806] pci 0000:00:01.0: PME# disabled [ 2.117830] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 2.117879] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 2.117883] pci 0000:00:02.0: PME# disabled [ 2.117905] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 2.117954] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.117958] pci 0000:00:03.0: PME# disabled [ 2.117983] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 2.118032] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.118036] pci 0000:00:07.0: PME# disabled [ 2.118059] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 2.118108] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 2.118112] pci 0000:00:08.0: PME# disabled [ 2.118135] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 2.118184] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.118187] pci 0000:00:09.0: PME# disabled [ 2.118210] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604 [ 2.118259] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 2.118263] pci 0000:00:0a.0: PME# disabled [ 2.118285] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 2.118354] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 2.118417] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 2.118483] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 2.118548] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 2.118617] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 2.118683] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 2.118747] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 2.118811] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 2.118825] pci 0000:00:16.0: reg 10: [mem 0xfbcd8000-0xfbcdbfff 64bit] [ 2.118895] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 2.118909] pci 0000:00:16.1: reg 10: [mem 0xfbcdc000-0xfbcdffff 64bit] [ 2.118976] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 2.118990] pci 0000:00:16.2: reg 10: [mem 0xfbce0000-0xfbce3fff 64bit] [ 2.119057] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 2.119070] pci 0000:00:16.3: reg 10: [mem 0xfbce4000-0xfbce7fff 64bit] [ 2.119137] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 2.119151] pci 0000:00:16.4: reg 10: [mem 0xfbce8000-0xfbcebfff 64bit] [ 2.119218] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 2.119231] pci 0000:00:16.5: reg 10: [mem 0xfbcec000-0xfbceffff 64bit] [ 2.119298] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 2.119312] pci 0000:00:16.6: reg 10: [mem 0xfbcf0000-0xfbcf3fff 64bit] [ 2.119379] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 2.119392] pci 0000:00:16.7: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] [ 2.119462] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 2.119507] pci 0000:00:1a.0: reg 20: [io 0xa400-0xa41f] [ 2.119555] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 2.119600] pci 0000:00:1a.1: reg 20: [io 0xa480-0xa49f] [ 2.119659] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 2.119681] pci 0000:00:1a.7: reg 10: [mem 0xfbcfd000-0xfbcfd3ff] [ 2.119757] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.119761] pci 0000:00:1a.7: PME# disabled [ 2.119786] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 2.119802] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] [ 2.119859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.119863] pci 0000:00:1b.0: PME# disabled [ 2.119885] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 2.119930] pci 0000:00:1d.0: reg 20: [io 0xa800-0xa81f] [ 2.119976] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 2.120021] pci 0000:00:1d.1: reg 20: [io 0xa880-0xa89f] [ 2.120066] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 2.120111] pci 0000:00:1d.2: reg 20: [io 0xac00-0xac1f] [ 2.120157] pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03 [ 2.120201] pci 0000:00:1d.3: reg 20: [io 0xb000-0xb01f] [ 2.120256] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 2.120277] pci 0000:00:1d.7: reg 10: [mem 0xfbcfe000-0xfbcfe3ff] [ 2.120353] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.120358] pci 0000:00:1d.7: PME# disabled [ 2.120380] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.120439] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 2.120525] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003) [ 2.120530] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003) [ 2.120566] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101 [ 2.120583] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07] [ 2.120591] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883] [ 2.120600] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807] [ 2.120608] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483] [ 2.120617] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb40f] [ 2.120625] pci 0000:00:1f.2: reg 24: [io 0xb080-0xb08f] [ 2.120664] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 2.120680] pci 0000:00:1f.3: reg 10: [mem 0xfbcff000-0xfbcff0ff 64bit] [ 2.120702] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 2.120736] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101 [ 2.120753] pci 0000:00:1f.5: reg 10: [io 0xcc00-0xcc07] [ 2.120761] pci 0000:00:1f.5: reg 14: [io 0xc880-0xc883] [ 2.120770] pci 0000:00:1f.5: reg 18: [io 0xc800-0xc807] [ 2.120778] pci 0000:00:1f.5: reg 1c: [io 0xc480-0xc483] [ 2.120786] pci 0000:00:1f.5: reg 20: [io 0xc400-0xc40f] [ 2.120795] pci 0000:00:1f.5: reg 24: [io 0xc080-0xc08f] [ 2.120883] pci 0000:08:00.0: [168c:002b] type 0 class 0x000280 [ 2.120902] pci 0000:08:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 2.120970] pci 0000:08:00.0: supports D1 [ 2.120972] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 2.120976] pci 0000:08:00.0: PME# disabled [ 2.134463] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.134470] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.134521] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.134574] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.134629] pci 0000:05:00.0: [1002:68f9] type 0 class 0x000300 [ 2.134644] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.134656] pci 0000:05:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit] [ 2.134664] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff] [ 2.134678] pci 0000:05:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref] [ 2.134698] pci 0000:05:00.0: supports D1 D2 [ 2.134721] pci 0000:05:00.1: [1002:aa68] type 0 class 0x000403 [ 2.134735] pci 0000:05:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 2.134784] pci 0000:05:00.1: supports D1 D2 [ 2.154423] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.154427] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.154432] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.154439] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.154485] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.154543] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.154589] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.154636] pci 0000:01:04.0: [1102:0007] type 0 class 0x000401 [ 2.154654] pci 0000:01:04.0: reg 10: [io 0xdc00-0xdc1f] [ 2.154722] pci 0000:01:04.0: supports D1 D2 [ 2.154763] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 2.154767] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.154775] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.154778] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.154780] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.154783] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 2.154785] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 2.154788] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 2.154820] pci 0000:00:01.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154829] pci 0000:00:01.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154834] pci 0000:08:00.0: Dev MPS 128 MPSS 128 MRRS 512 [ 2.154836] pci 0000:08:00.0: MPS configured higher than maximum supported by the device. If a bus issue occurs, try running with pci=pcie_bus_safe. [ 2.154852] pci 0000:08:00.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154856] pci 0000:00:02.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154864] pci 0000:00:02.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154868] pci 0000:00:03.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154876] pci 0000:00:03.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154880] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154887] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154891] pci 0000:05:00.0: Dev MPS 256 MPSS 256 MRRS 512 [ 2.154902] pci 0000:05:00.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154906] pci 0000:05:00.1: Dev MPS 256 MPSS 256 MRRS 512 [ 2.154916] pci 0000:05:00.1: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154920] pci 0000:00:08.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154929] pci 0000:00:08.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154932] pci 0000:00:09.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154941] pci 0000:00:09.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154945] pci 0000:00:0a.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.154953] pci 0000:00:0a.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.154957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.155164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.155251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 2.155278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT] [ 2.155303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 2.155338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 2.155364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE8._PRT] [ 2.155389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 2.155414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT] [ 2.155438] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.155441] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 2.155443] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.173044] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.173090] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 2.173130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) [ 2.173174] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.173217] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.173262] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 2.173306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 2.173350] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15) [ 2.173482] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.173486] vgaarb: loaded [ 2.173487] vgaarb: bridge control possible 0000:05:00.0 [ 2.173653] SCSI subsystem initialized [ 2.173697] libata version 3.00 loaded. [ 2.173740] usbcore: registered new interface driver usbfs [ 2.173750] usbcore: registered new interface driver hub [ 2.173778] usbcore: registered new device driver usb [ 2.173894] wmi: Mapper loaded [ 2.173896] PCI: Using ACPI for IRQ routing [ 2.180322] PCI: Discovered peer bus fe [ 2.180348] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600 [ 2.180374] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600 [ 2.180401] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600 [ 2.180425] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600 [ 2.180449] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600 [ 2.180475] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600 [ 2.180499] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600 [ 2.180522] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600 [ 2.180545] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.180569] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.180594] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600 [ 2.180617] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600 [ 2.180640] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600 [ 2.180665] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600 [ 2.180691] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600 [ 2.180714] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600 [ 2.180737] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.180760] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.180786] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600 [ 2.180809] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600 [ 2.180832] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600 [ 2.180857] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600 [ 2.181323] PCI: Discovered peer bus ff [ 2.181350] pci 0000:ff:00.0: [8086:2c40] type 0 class 0x000600 [ 2.181371] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 2.181395] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 2.181415] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 2.181436] pci 0000:ff:02.4: [8086:2c14] type 0 class 0x000600 [ 2.181457] pci 0000:ff:02.5: [8086:2c15] type 0 class 0x000600 [ 2.181478] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 2.181501] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 2.181522] pci 0000:ff:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.181543] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.181565] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 2.181585] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 2.181606] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 2.181626] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 2.181649] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 2.181672] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 2.181693] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.181713] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.181736] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 2.181756] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 2.181777] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 2.181797] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 2.182281] PCI: pci_cache_line_size set to 64 bytes [ 2.182494] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 2.182496] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 2.182587] NetLabel: Initializing [ 2.182589] NetLabel: domain hash size = 128 [ 2.182590] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.182604] NetLabel: unlabeled traffic allowed by default [ 2.182656] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.182661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.182666] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.264394] Switching to clocksource hpet [ 2.273410] AppArmor: AppArmor Filesystem Enabled [ 2.273439] pnp: PnP ACPI init [ 2.273457] ACPI: bus type pnp registered [ 2.273586] pnp 00:00: [bus 00-ff] [ 2.273589] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.273591] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.273593] pnp 00:00: [io 0x0d00-0xffff window] [ 2.273595] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.273601] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.273603] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 2.273605] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 2.273689] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.273700] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 2.273702] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 2.273704] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 2.273706] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 2.273708] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 2.273710] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 2.273829] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 2.273832] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 2.273835] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 2.273838] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 2.273841] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 2.273844] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 2.273847] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.273883] pnp 00:02: [dma 4] [ 2.273885] pnp 00:02: [io 0x0000-0x000f] [ 2.273887] pnp 00:02: [io 0x0081-0x0083] [ 2.273889] pnp 00:02: [io 0x0087] [ 2.273891] pnp 00:02: [io 0x0089-0x008b] [ 2.273893] pnp 00:02: [io 0x008f] [ 2.273894] pnp 00:02: [io 0x00c0-0x00df] [ 2.273923] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.273934] pnp 00:03: [io 0x0070-0x0071] [ 2.273946] pnp 00:03: [irq 8] [ 2.273977] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.273986] pnp 00:04: [io 0x0061] [ 2.274013] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.274022] pnp 00:05: [io 0x00f0-0x00ff] [ 2.274028] pnp 00:05: [irq 13] [ 2.274055] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.274212] Switched to NOHz mode on CPU #0 [ 2.274250] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.274253] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.274255] pnp 00:06: [io 0x0290-0x029f] [ 2.274269] Switched to NOHz mode on CPU #3 [ 2.274272] Switched to NOHz mode on CPU #1 [ 2.274278] Switched to NOHz mode on CPU #4 [ 2.274284] Switched to NOHz mode on CPU #6 [ 2.274310] Switched to NOHz mode on CPU #2 [ 2.274326] Switched to NOHz mode on CPU #7 [ 2.274334] Switched to NOHz mode on CPU #5 [ 2.274341] system 00:06: [io 0x0290-0x029f] has been reserved [ 2.274345] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.274464] pnp 00:07: [io 0x0010-0x001f] [ 2.274466] pnp 00:07: [io 0x0022-0x003f] [ 2.274468] pnp 00:07: [io 0x0044-0x005f] [ 2.274470] pnp 00:07: [io 0x0062-0x0063] [ 2.274472] pnp 00:07: [io 0x0065-0x006f] [ 2.274473] pnp 00:07: [io 0x0072-0x007f] [ 2.274475] pnp 00:07: [io 0x0080] [ 2.274477] pnp 00:07: [io 0x0084-0x0086] [ 2.274478] pnp 00:07: [io 0x0088] [ 2.274480] pnp 00:07: [io 0x008c-0x008e] [ 2.274482] pnp 00:07: [io 0x0090-0x009f] [ 2.274484] pnp 00:07: [io 0x00a2-0x00bf] [ 2.274485] pnp 00:07: [io 0x00e0-0x00ef] [ 2.274487] pnp 00:07: [io 0x04d0-0x04d1] [ 2.274489] pnp 00:07: [io 0x0ca0-0x0caf] [ 2.274491] pnp 00:07: [io 0x0800-0x087f] [ 2.274493] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 2.274495] pnp 00:07: [io 0x0500-0x057f] [ 2.274501] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 2.274503] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 2.274505] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 2.274611] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 2.274614] system 00:07: [io 0x0ca0-0x0caf] has been reserved [ 2.274616] system 00:07: [io 0x0800-0x087f] has been reserved [ 2.274619] system 00:07: [io 0x0500-0x057f] has been reserved [ 2.274622] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.274625] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.274627] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 2.274631] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.274685] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 2.274717] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.274927] pnp 00:09: [io 0x03f8-0x03ff] [ 2.274934] pnp 00:09: [irq 4] [ 2.274936] pnp 00:09: [dma 0 disabled] [ 2.275009] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.275220] pnp 00:0a: [io 0x02f8-0x02ff] [ 2.275227] pnp 00:0a: [irq 3] [ 2.275229] pnp 00:0a: [dma 0 disabled] [ 2.275328] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.275400] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 2.275402] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 2.275488] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.275491] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.275494] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.275559] pnp 00:0c: [io 0x0060] [ 2.275561] pnp 00:0c: [io 0x0064] [ 2.275567] pnp 00:0c: [irq 12] [ 2.275610] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 2.275647] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 2.275732] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 2.275736] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.275897] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 2.275899] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 2.275901] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 2.275903] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 2.275905] pnp 00:0e: [mem 0xfed90000-0xffffffff] [ 2.276009] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.276012] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 2.276015] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.276017] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.276020] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 2.276024] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.276148] pnp: PnP ACPI: found 15 devices [ 2.276149] ACPI: ACPI bus type pnp unregistered [ 2.283503] PCI: max bus depth: 1 pci_try_num: 2 [ 2.283564] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.283569] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.283576] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.283586] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.283595] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.283598] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.283603] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.283607] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.283612] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.283621] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.283631] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.283640] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 2.283643] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.283662] pci 0000:00:01.0: setting latency timer to 64 [ 2.283669] pci 0000:00:02.0: setting latency timer to 64 [ 2.283676] pci 0000:00:03.0: setting latency timer to 64 [ 2.283682] pci 0000:00:07.0: setting latency timer to 64 [ 2.283689] pci 0000:00:08.0: setting latency timer to 64 [ 2.283696] pci 0000:00:09.0: setting latency timer to 64 [ 2.283702] pci 0000:00:0a.0: setting latency timer to 64 [ 2.283709] pci 0000:00:1e.0: setting latency timer to 64 [ 2.283714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.283716] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.283719] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.283721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 2.283723] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.283725] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.283728] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.283730] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.283733] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 2.283735] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.283738] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 2.283741] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 2.283743] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 2.283745] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 2.283747] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 2.283750] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.283752] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.283754] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 2.283756] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 2.283759] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 2.283762] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 2.283807] NET: Registered protocol family 2 [ 2.284070] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.285339] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.287391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.287634] TCP: Hash tables configured (established 524288 bind 65536) [ 2.287637] TCP reno registered [ 2.287653] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.287698] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.287868] NET: Registered protocol family 1 [ 2.288095] pci 0000:05:00.0: Boot video device [ 2.288177] PCI: CLS 256 bytes, default 64 [ 2.288238] Trying to unpack rootfs image as initramfs... [ 3.073011] Freeing initrd memory: 36452k freed [ 3.082152] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.082159] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000 [ 3.082161] software IO TLB at phys 0xbb77b000 - 0xbf77b000 [ 3.083798] audit: initializing netlink socket (disabled) [ 3.083816] type=2000 audit(1314414469.880:1): initialized [ 3.124265] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.171191] VFS: Disk quotas dquot_6.5.2 [ 3.171272] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.171991] fuse init (API version 7.17) [ 3.172094] msgmni has been set to 15947 [ 3.172394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.172429] io scheduler noop registered [ 3.172431] io scheduler deadline registered [ 3.172474] io scheduler cfq registered (default) [ 3.173009] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.173034] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.173136] intel_idle: MWAIT substates: 0x1120 [ 3.173152] intel_idle: v0.4 model 0x1A [ 3.173153] intel_idle: lapic_timer_reliable_states 0x2 [ 3.173291] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.173297] ACPI: Power Button [PWRB] [ 3.173333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.173336] ACPI: Power Button [PWRF] [ 3.173551] ACPI: acpi_idle yielding to intel_idle [ 3.176686] ERST: Failed to get Error Log Address Range. [ 3.342263] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 3.342334] \_SB_:_OSC evaluation returned wrong type [ 3.342336] _OSC request data:1 0 0 [ 3.342341] GHES: Failed to enable APEI firmware first mode. [ 3.342421] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.362922] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.512372] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 4.070724] Refined TSC clocksource calibration: 2133.408 MHz. [ 4.070730] Switching to clocksource tsc [ 8.622056] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.781605] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.921050] Linux agpgart interface v0.103 [ 8.922380] brd: module loaded [ 8.923068] loop: module loaded [ 8.923271] ata_piix 0000:00:1f.2: version 2.13 [ 8.923299] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.923308] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 8.923360] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 8.923599] scsi0 : ata_piix [ 8.923687] scsi1 : ata_piix [ 8.924641] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23 [ 8.924647] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23 [ 8.924674] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.924679] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 8.924719] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 8.924886] scsi2 : ata_piix [ 8.924961] scsi3 : ata_piix [ 8.925729] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 8.925733] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 8.926064] Fixed MDIO Bus: probed [ 8.926100] PPP generic driver version 2.4.2 [ 8.926143] tun: Universal TUN/TAP device driver, 1.6 [ 8.926145] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.926230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.926258] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.926279] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.926283] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.926324] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 8.926355] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.930221] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 8.930236] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcfd000 [ 8.950695] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.950830] hub 1-0:1.0: USB hub found [ 8.950834] hub 1-0:1.0: 4 ports detected [ 8.950936] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.950950] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.950953] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.950999] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 8.951023] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.954889] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 8.954894] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfe000 [ 8.970654] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.970771] hub 2-0:1.0: USB hub found [ 8.970776] hub 2-0:1.0: 8 ports detected [ 8.970875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.970897] uhci_hcd: USB Universal Host Controller Interface driver [ 8.970933] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.970939] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.970942] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.970980] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.971014] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400 [ 8.971133] hub 3-0:1.0: USB hub found [ 8.971138] hub 3-0:1.0: 2 ports detected [ 8.971222] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.971228] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.971231] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.971274] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.971298] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480 [ 8.971411] hub 4-0:1.0: USB hub found [ 8.971414] hub 4-0:1.0: 2 ports detected [ 8.971498] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.971504] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.971507] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.971550] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.971577] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800 [ 8.971683] hub 5-0:1.0: USB hub found [ 8.971687] hub 5-0:1.0: 2 ports detected [ 8.971776] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.971783] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.971786] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.971827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.971860] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a880 [ 8.971967] hub 6-0:1.0: USB hub found [ 8.971971] hub 6-0:1.0: 2 ports detected [ 8.972053] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.972059] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.972062] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.972099] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 8.972124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 [ 8.972232] hub 7-0:1.0: USB hub found [ 8.972236] hub 7-0:1.0: 2 ports detected [ 8.972318] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8.972324] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8.972327] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 8.972369] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 8.972393] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b000 [ 8.972501] hub 8-0:1.0: USB hub found [ 8.972505] hub 8-0:1.0: 2 ports detected [ 8.972641] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 8.972643] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 8.975302] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.975331] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.975439] mousedev: PS/2 mouse device common for all mice [ 8.975596] rtc_cmos 00:03: RTC can wake from S4 [ 8.975698] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.975724] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.975836] device-mapper: uevent: version 1.0.3 [ 8.975922] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 8.976000] device-mapper: multipath: version 1.3.0 loaded [ 8.976003] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.976282] cpuidle: using governor ladder [ 8.976572] cpuidle: using governor menu [ 8.976574] EFI Variables Facility v0.08 2004-May-17 [ 8.976843] TCP cubic registered [ 8.976986] NET: Registered protocol family 10 [ 8.977627] NET: Registered protocol family 17 [ 8.977649] Registering the dns_resolver key type [ 8.978085] PM: Hibernation image not present or could not be loaded. [ 8.978102] registered taskstats version 1 [ 9.001463] Magic number: 7:421:109 [ 9.001478] usbmon usbmon5: hash matches [ 9.001898] rtc_cmos 00:03: setting system clock to 2011-08-27 03:07:56 UTC (1314414476) [ 9.005550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 9.005552] EDD information not available. [ 9.281137] ata4: SATA link down (SStatus 0 SControl 300) [ 9.292019] ata3: SATA link down (SStatus 0 SControl 300) [ 9.350099] usb 2-2: new high speed USB device number 3 using ehci_hcd [ 9.789181] usb 5-1: new low speed USB device number 2 using uhci_hcd [ 9.789189] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.789206] ata2.01: SATA link down (SStatus 0 SControl 300) [ 9.789220] ata2.01: link offline, clearing class 3 to NONE [ 9.789344] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.789356] ata1.01: SATA link down (SStatus 0 SControl 300) [ 9.809465] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 [ 9.809720] ata1.00: ATA-8: ST31000524AS, JC45, max UDMA/133 [ 9.809726] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 9.849317] ata2.00: configured for UDMA/100 [ 9.849533] ata1.00: configured for UDMA/133 [ 9.850004] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5 [ 9.850341] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.850442] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.850501] sd 0:0:0:0: [sda] Write Protect is off [ 9.850505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.850530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.852213] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 [ 9.854832] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.854837] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.855045] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.855304] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.888222] sda: sda1 sda2 < sda5 > [ 9.889259] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.891869] Freeing unused kernel memory: 824k freed [ 9.892051] Write protecting the kernel read-only data: 12288k [ 9.901000] Freeing unused kernel memory: 1836k freed [ 9.907693] Freeing unused kernel memory: 1380k freed [ 9.931869] udev[104]: starting version 167 [ 9.969987] [drm] Initialized drm 1.1.0 20060810 [ 9.995100] [drm] radeon defaulting to kernel modesetting. [ 9.995103] [drm] radeon kernel modesetting enabled. [ 9.995218] radeon 0000:05:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 9.995224] radeon 0000:05:00.0: setting latency timer to 64 [ 9.996118] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340). [ 9.996164] [drm] register mmio base: 0xFBDC0000 [ 9.996166] [drm] register mmio size: 131072 [ 9.996330] ATOM BIOS: 113 [ 9.996409] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 9.996412] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 9.996418] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 9.996421] [drm] Detected VRAM RAM=1024M, BAR=256M [ 9.996422] [drm] RAM width 64bits DDR [ 9.996616] [TTM] Zone kernel: Available graphics memory: 4084572 kiB. [ 9.996618] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 9.996620] [TTM] Initializing pool allocator. [ 9.996643] [drm] radeon: 1024M of VRAM memory ready [ 9.996645] [drm] radeon: 512M of GTT memory ready. [ 9.996664] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.996666] [drm] Driver supports precise vblank timestamp query. [ 9.996706] radeon 0000:05:00.0: irq 64 for MSI/MSI-X [ 9.996712] radeon 0000:05:00.0: radeon: using MSI. [ 9.996749] [drm] radeon: irq initialized. [ 9.996753] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 9.997485] [drm] Loading CEDAR Microcode [ 10.012926] radeon 0000:05:00.0: WB enabled [ 10.025716] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 10.026029] generic-usb 0003:05D5:0624.0001: input,hidraw0: USB HID v1.10 Keyboard [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input0 [ 10.029757] [drm] ring test succeeded in 1 usecs [ 10.029885] [drm] radeon: ib pool ready. [ 10.030020] [drm] ib test succeeded in 0 usecs [ 10.030029] failed to evaluate ATIF got AE_BAD_PARAMETER [ 10.030269] [drm] Radeon Display Connectors [ 10.030271] [drm] Connector 0: [ 10.030273] [drm] HDMI-A [ 10.030274] [drm] HPD1 [ 10.030276] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 10.030278] [drm] Encoders: [ 10.030279] [drm] DFP1: INTERNAL_UNIPHY1 [ 10.030281] [drm] Connector 1: [ 10.030282] [drm] DVI-I [ 10.030283] [drm] HPD4 [ 10.030285] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 10.030287] [drm] Encoders: [ 10.030288] [drm] DFP2: INTERNAL_UNIPHY [ 10.030290] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 10.030291] [drm] Connector 2: [ 10.030292] [drm] VGA [ 10.030294] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 10.030296] [drm] Encoders: [ 10.030298] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 10.040153] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 10.041624] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 [ 10.042017] generic-usb 0003:05D5:0624.0002: input,hidraw1: USB HID v1.10 Device [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input1 [ 10.042044] usbcore: registered new interface driver usbhid [ 10.042047] usbhid: USB HID core driver [ 10.093561] [drm] Radeon display connector DVI-I-1: Found valid EDID [ 10.103404] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 10.103428] [drm] Internal thermal controller with fan control [ 10.103470] [drm] radeon: power management initialized [ 10.105037] parse error at position 5 in video mode 'vesafb' [ 10.105039] parse error at position 5 in video mode 'vesafb' [ 10.105041] parse error at position 5 in video mode 'vesafb' [ 10.183698] [drm] fb mappable at 0xD0141000 [ 10.183700] [drm] vram apper at 0xD0000000 [ 10.183702] [drm] size 7299072 [ 10.183703] [drm] fb depth is 24 [ 10.183705] [drm] pitch is 6912 [ 10.183909] fbcon: radeondrmfb (fb0) is primary device [ 10.638719] Console: switching to colour frame buffer device 210x65 [ 10.643057] fb0: radeondrmfb frame buffer device [ 10.643059] drm: registered panic notifier [ 10.643065] [drm] Initialized radeon 2.11.0 20080528 for 0000:05:00.0 on minor 0 [ 11.062295] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.864681] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.219771] udev[424]: starting version 167 [ 14.538971] dca service started, version 1.12.1 [ 14.739586] lp: driver loaded but no devices found [ 14.910858] EDAC MC: Ver: 2.1.0 [ 14.959221] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 14.959300] ioatdma 0000:00:16.0: enabling device (0000 -> 0002) [ 14.959320] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 14.959350] ioatdma 0000:00:16.0: setting latency timer to 64 [ 14.959389] ioatdma 0000:00:16.0: irq 65 for MSI/MSI-X [ 14.959674] ioatdma 0000:00:16.1: enabling device (0000 -> 0002) [ 14.959687] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 14.959711] ioatdma 0000:00:16.1: setting latency timer to 64 [ 14.959748] ioatdma 0000:00:16.1: irq 66 for MSI/MSI-X [ 14.959948] ioatdma 0000:00:16.2: enabling device (0000 -> 0002) [ 14.959959] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 14.959978] ioatdma 0000:00:16.2: setting latency timer to 64 [ 14.960013] ioatdma 0000:00:16.2: irq 67 for MSI/MSI-X [ 14.960208] ioatdma 0000:00:16.3: enabling device (0000 -> 0002) [ 14.960218] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 14.960238] ioatdma 0000:00:16.3: setting latency timer to 64 [ 14.960273] ioatdma 0000:00:16.3: irq 68 for MSI/MSI-X [ 14.960460] ioatdma 0000:00:16.4: enabling device (0000 -> 0002) [ 14.960464] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 14.960484] ioatdma 0000:00:16.4: setting latency timer to 64 [ 14.960518] ioatdma 0000:00:16.4: irq 69 for MSI/MSI-X [ 14.960709] ioatdma 0000:00:16.5: enabling device (0000 -> 0002) [ 14.960714] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 14.960734] ioatdma 0000:00:16.5: setting latency timer to 64 [ 14.960769] ioatdma 0000:00:16.5: irq 70 for MSI/MSI-X [ 14.960960] ioatdma 0000:00:16.6: enabling device (0000 -> 0002) [ 14.960964] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 14.960986] ioatdma 0000:00:16.6: setting latency timer to 64 [ 14.961022] ioatdma 0000:00:16.6: irq 71 for MSI/MSI-X [ 14.961261] ioatdma 0000:00:16.7: enabling device (0000 -> 0002) [ 14.961266] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 14.961285] ioatdma 0000:00:16.7: setting latency timer to 64 [ 14.961320] ioatdma 0000:00:16.7: irq 72 for MSI/MSI-X [ 14.985069] Linux video capture interface: v2.00 [ 15.018623] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0 [ 15.018643] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED) [ 15.018678] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 15.018687] EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 15.018690] EDAC i7core: Driver loaded. [ 15.026271] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 15.134994] ipmi message handler version 39.2 [ 15.151784] ipmi device interface [ 15.305242] IPMI System Interface driver. [ 15.305302] ipmi_si: probing via SMBIOS [ 15.305304] ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0 [ 15.305306] ipmi_si: Adding SMBIOS-specified kcs state machine [ 15.305310] ipmi_si: probing via SPMI [ 15.305312] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 15.305314] ipmi_si: Adding SPMI-specified kcs state machine [ 15.305317] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0 [ 15.305320] ipmi_si: Could not set up I/O space [ 15.367805] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 15.370371] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input4 [ 15.370726] usbcore: registered new interface driver uvcvideo [ 15.370728] USB Video Class driver (1.1.1) [ 15.377779] ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 15.377786] ipmi_si: Interface detection failed [ 15.470818] coretemp coretemp.0: TjMax is 97 C. [ 15.470831] coretemp coretemp.0: TjMax is 97 C. [ 15.470892] coretemp coretemp.0: TjMax is 97 C. [ 15.471103] coretemp coretemp.0: TjMax is 97 C. [ 15.471192] coretemp coretemp.4: TjMax is 97 C. [ 15.471369] coretemp coretemp.4: TjMax is 97 C. [ 15.471591] coretemp coretemp.4: TjMax is 97 C. [ 15.471777] coretemp coretemp.4: TjMax is 97 C. [ 15.758427] type=1400 audit(1314414483.267:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=706 comm="apparmor_parser" [ 15.758490] type=1400 audit(1314414483.267:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser" [ 15.758545] type=1400 audit(1314414483.267:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser" [ 15.915736] cfg80211: Calling CRDA to update world regulatory domain [ 15.932936] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 16.021899] w83627ehf: Found W83667HG chip at 0x290 [ 16.379332] cfg80211: World regulatory domain updated: [ 16.379336] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.379339] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.379342] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.379344] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.379347] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.379349] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.615162] i2c i2c-8: Found w83795adg rev. B at 0x2f [ 16.714655] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.714726] snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X [ 16.714881] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 16.804994] hda-intel: no codecs found! [ 16.805080] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 16.805150] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 16.805707] snd_hda_intel 0000:05:00.1: irq 73 for MSI/MSI-X [ 16.805735] snd_hda_intel 0000:05:00.1: setting latency timer to 64 [ 16.854851] w83795 8-002f: PECI agent 1 Tbase temperature: 85 [ 16.874822] w83795 8-002f: PECI agent 2 Tbase temperature: 85 [ 17.117500] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 17.118024] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:07.0/0000:05:00.1/sound/card0/input6 [ 17.504835] ath9k 0000:08:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 17.504846] ath9k 0000:08:00.0: setting latency timer to 64 [ 17.553543] ath: EEPROM regdomain: 0x809c [ 17.553545] ath: EEPROM indicates we should expect a country code [ 17.553548] ath: doing EEPROM country->regdmn map search [ 17.553549] ath: country maps to regdmn code: 0x52 [ 17.553551] ath: Country alpha2 being used: CN [ 17.553553] ath: Regpair used: 0x52 [ 17.553556] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.553559] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553561] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.553564] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553566] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.553568] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553570] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.553573] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553575] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.553577] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553579] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.553582] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553584] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.553587] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553589] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.553591] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553593] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.553596] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553598] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.553601] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553603] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.553605] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.553607] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 17.553610] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 17.553612] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 17.555216] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.555219] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555222] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.555224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555227] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.555229] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555231] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.555234] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555236] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.555239] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555241] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.555244] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555246] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.555249] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555251] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.555253] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555255] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.555258] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555260] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.555263] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555265] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.555268] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555270] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.555272] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555274] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.555277] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.555279] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 17.555282] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.592915] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 17.593759] cfg80211: Calling CRDA for country: CN [ 17.593923] Registered led device: ath9k-phy0 [ 17.593928] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011a20000, irq=28 [ 17.597378] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.597382] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597385] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.597388] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597390] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.597393] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597395] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.597397] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597399] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.597402] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597404] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.597407] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597409] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.597411] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597414] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.597416] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597418] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.597421] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597423] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.597426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597428] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.597431] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597433] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.597435] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597437] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.597440] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 17.597442] cfg80211: Disabling freq 2484 MHz [ 17.597446] cfg80211: Regulatory domain changed to country: CN [ 17.597448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.597451] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 17.597453] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 17.686797] snd_ca0106 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.686818] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 18.657404] type=1400 audit(1314414486.167:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1073 comm="apparmor_parser" [ 18.698192] type=1400 audit(1314414486.207:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1067 comm="apparmor_parser" [ 18.709065] type=1400 audit(1314414486.217:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1068 comm="apparmor_parser" [ 18.709135] type=1400 audit(1314414486.217:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 18.709196] type=1400 audit(1314414486.217:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 18.749052] type=1400 audit(1314414486.257:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1074 comm="apparmor_parser" [ 18.788046] type=1400 audit(1314414486.297:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1071 comm="apparmor_parser" [ 19.050269] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.460125] ppdev: user-space parallel port driver [ 21.579607] Adding 19529724k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:19529724k [ 22.046194] wlan0: authenticate with 00:26:b8:18:ff:90 (try 1) [ 22.048136] wlan0: authenticated [ 22.048165] wlan0: associate with 00:26:b8:18:ff:90 (try 1) [ 22.051299] wlan0: RX AssocResp from 00:26:b8:18:ff:90 (capab=0x431 status=0 aid=3) [ 22.051304] wlan0: associated [ 22.052225] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.173979] cfg80211: Calling CRDA for country: US [ 22.177720] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 22.177725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177728] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 22.177730] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177733] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 22.177736] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177738] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 22.177741] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177743] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 22.177745] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177748] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 22.177750] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177752] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 22.177755] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177757] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 22.177760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177762] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 22.177764] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177767] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 22.177769] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177771] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 22.177774] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 22.177776] cfg80211: Disabling freq 2467 MHz [ 22.177778] cfg80211: Disabling freq 2472 MHz [ 22.177779] cfg80211: Disabling freq 2484 MHz [ 22.177783] cfg80211: Regulatory domain changed to country: US [ 22.177784] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.177787] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 22.177790] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 22.177792] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.177795] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.177797] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.177799] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 24.214100] audit_printk_skb: 12 callbacks suppressed [ 24.214103] type=1400 audit(1314414491.737:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1069 comm="apparmor_parser" [ 24.215225] type=1400 audit(1314414491.737:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1069 comm="apparmor_parser" [ 24.215595] type=1400 audit(1314414491.737:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1069 comm="apparmor_parser" [ 26.229917] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 28.939041] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-27 3:28 ` Pavel Ivanov @ 2011-08-29 1:15 ` Huang Ying 2011-08-29 4:10 ` Pavel Ivanov 2011-08-29 5:37 ` Huang Ying 1 sibling, 1 reply; 27+ messages in thread From: Huang Ying @ 2011-08-29 1:15 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 625 bytes --] Hi, Pavel, On 08/27/2011 11:28 AM, Pavel Ivanov wrote: > Huang, > > I can confirm that new patch got rid of the old error message but > introduced a new one: > > ERST: Failed to get Error Log Address Range Please try the attached patch to find why there is the error message. > Also I noticed there's another suspicious message in dmesg and it was > there earlier too (although it's not shown on console): > > GHES: Failed to enable APEI firmware first mode > > Is it bad? What does it mean? It means you may receive a unknown NMI without GHES error record for some detected hardware error. Best Regards, Huang Ying [-- Attachment #2: dbg_erst_erange.patch --] [-- Type: text/x-patch, Size: 767 bytes --] --- drivers/acpi/apei/erst.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -387,14 +387,17 @@ static int erst_get_erange(struct erst_e erst_exec_ctx_init(&ctx); rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_RANGE); + pr_info(ERST_PFX "get erange: %d\n", rc); if (rc) return rc; range->base = apei_exec_ctx_get_output(&ctx); rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_LENGTH); + pr_info(ERST_PFX "get erange length: %d\n", rc); if (rc) return rc; range->size = apei_exec_ctx_get_output(&ctx); rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_ATTRIBUTES); + pr_info(ERST_PFX "get erange attributes: %d\n", rc); if (rc) return rc; range->attr = apei_exec_ctx_get_output(&ctx); ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 1:15 ` Huang Ying @ 2011-08-29 4:10 ` Pavel Ivanov 2011-08-29 5:22 ` Huang Ying 0 siblings, 1 reply; 27+ messages in thread From: Pavel Ivanov @ 2011-08-29 4:10 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi [-- Attachment #1: Type: text/plain, Size: 415 bytes --] On Sun, Aug 28, 2011 at 9:15 PM, Huang Ying <ying.huang@intel.com> wrote: > Hi, Pavel, > > On 08/27/2011 11:28 AM, Pavel Ivanov wrote: >> Huang, >> >> I can confirm that new patch got rid of the old error message but >> introduced a new one: >> >> ERST: Failed to get Error Log Address Range > > Please try the attached patch to find why there is the error message. dmesg after the patch is in attachment. Pavel [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 81713 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-rc3-mods (pivanof@PavelComp) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #13 SMP PREEMPT Sun Aug 28 23:53:40 EDT 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/Z8NA-D6(C), BIOS 1002 06/28/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 0200000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 base 00BF800000 mask FFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 23fff6000-240000000 [ 0.000000] RAMDISK: 33470000 - 35a30000 [ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf798540 00128 (v01 062810 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000bf798670 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79fcb0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: EINJ 00000000bf7986b0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000bf798840 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000bf798870 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000bf798a20 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] SRAT: Node 1 PXM 1 140000000-240000000 [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffe000 - 000000013fffffff] [ 0.000000] Initmem setup node 1 0000000140000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffe000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013be00000-ffff88013fdfffff] on node 0 [ 0.000000] [ffffea0005000000-ffffea0008ffffff] PMD -> [ffff88023b600000-ffff88023f5fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] 1: 0x00140000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 1046287 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 24 Processors exceeds NR_CPUS limit of 16 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000 [ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000 [ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s81664 r8192 d20736 u262144 [ 0.000000] pcpu-alloc: s81664 r8192 d20736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2057994 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3-mods root=UUID=a6d88530-6469-4ea2-91b9-410e088b4eff ro quiet splash video=vesafb vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8126448k/9437184k available (6332k kernel code, 1057732k absent, 253004k reserved, 6738k data, 824k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1216 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.010000] TSC: PIT calibration matches HPET. 1 loops [ 0.010000] Detected 2133.403 MHz processor. [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.80 BogoMIPS (lpj=21334030) [ 0.000012] pid_max: default: 32768 minimum: 301 [ 0.000064] Security Framework initialized [ 0.000080] AppArmor: AppArmor initialized [ 0.000920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003397] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004355] Mount-cache hash table entries: 256 [ 0.004555] Initializing cgroup subsys cpuacct [ 0.004561] Initializing cgroup subsys memory [ 0.004588] Initializing cgroup subsys devices [ 0.004591] Initializing cgroup subsys freezer [ 0.004593] Initializing cgroup subsys net_cls [ 0.004595] Initializing cgroup subsys blkio [ 0.004640] CPU: Physical Processor ID: 0 [ 0.004642] CPU: Processor Core ID: 0 [ 0.004647] mce: CPU supports 9 MCE banks [ 0.004661] CPU0: Thermal monitoring enabled (TM1) [ 0.004670] using mwait in idle threads. [ 0.005817] ACPI: Core revision 20110623 [ 0.032816] ftrace: allocating 23820 entries in 94 pages [ 0.042407] Switched APIC routing to physical flat. [ 0.042870] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142675] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 0.270923] APIC calibration not consistent with PM-Timer: 110ms instead of 100ms [ 0.270925] APIC delta adjusted to PM-Timer: 833360 (916698) [ 0.270931] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.270940] ... version: 3 [ 0.270942] ... bit width: 48 [ 0.270943] ... generic registers: 4 [ 0.270945] ... value mask: 0000ffffffffffff [ 0.270946] ... max period: 000000007fffffff [ 0.270948] ... fixed-purpose events: 3 [ 0.270950] ... event mask: 000000070000000f [ 0.331545] NMI watchdog enabled, takes one hw-pmu counter. [ 0.410658] Booting Node 0, Processors #1 [ 0.410661] smpboot cpu 1: start_ip = 9a000 [ 0.590425] NMI watchdog enabled, takes one hw-pmu counter. [ 0.650180] #2 [ 0.650182] smpboot cpu 2: start_ip = 9a000 [ 0.829875] NMI watchdog enabled, takes one hw-pmu counter. [ 0.889676] #3 [ 0.889678] smpboot cpu 3: start_ip = 9a000 [ 1.069425] NMI watchdog enabled, takes one hw-pmu counter. [ 1.129200] Ok. [ 1.129202] Booting Node 1, Processors #4 [ 1.129206] smpboot cpu 4: start_ip = 9a000 [ 1.308866] NMI watchdog enabled, takes one hw-pmu counter. [ 1.368702] #5 [ 1.368704] smpboot cpu 5: start_ip = 9a000 [ 1.548419] NMI watchdog enabled, takes one hw-pmu counter. [ 1.608213] #6 [ 1.608215] smpboot cpu 6: start_ip = 9a000 [ 1.787893] NMI watchdog enabled, takes one hw-pmu counter. [ 1.847731] #7 [ 1.847733] smpboot cpu 7: start_ip = 9a000 [ 2.027424] NMI watchdog enabled, takes one hw-pmu counter. [ 2.047308] Brought up 8 CPUs [ 2.047312] Total of 8 processors activated (34094.03 BogoMIPS). [ 2.051314] devtmpfs: initialized [ 2.051506] PM: Registering ACPI NVS region at bf79e000 (204800 bytes) [ 2.052400] print_constraints: dummy: [ 2.052431] RTC time: 4:05:28, date: 08/29/11 [ 2.052478] NET: Registered protocol family 16 [ 2.052582] ACPI: bus type pci registered [ 2.052641] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.052645] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 2.093092] PCI: Using configuration type 1 for base access [ 2.094046] bio: create slab <bio-0> at 0 [ 2.094151] ACPI: Added _OSI(Module Device) [ 2.094154] ACPI: Added _OSI(Processor Device) [ 2.094156] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.094158] ACPI: Added _OSI(Processor Aggregator Device) [ 2.095805] ACPI: EC: Look up EC in DSDT [ 2.096088] \_SB_:_OSC evaluation returned wrong type [ 2.096090] _OSC request data:1 16 [ 2.097599] ACPI: Executed 1 blocks of module-level executable AML code [ 2.100590] ACPI: SSDT 00000000bf79e0c0 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.101103] ACPI: Dynamic OEM Table Load: [ 2.101106] ACPI: SSDT (null) 011A4 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.101208] ACPI: SSDT 00000000bf79f270 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.101651] ACPI: Dynamic OEM Table Load: [ 2.101654] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.101733] ACPI: SSDT 00000000bf79f8f0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.102199] ACPI: Dynamic OEM Table Load: [ 2.102202] ACPI: SSDT (null) 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20060113) [ 2.102760] ACPI: Interpreter enabled [ 2.102764] ACPI: (supports S0 S1 S4 S5) [ 2.102782] ACPI: Using IOAPIC for interrupt routing [ 2.110044] ACPI: No dock devices found. [ 2.110068] HEST: Table parsing has been initialized. [ 2.110072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.110157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.110320] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 2.110323] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 2.110325] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.110328] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 2.110330] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 2.110332] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 2.110349] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 2.110400] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.110404] pci 0000:00:00.0: PME# disabled [ 2.110432] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 2.110482] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.110486] pci 0000:00:01.0: PME# disabled [ 2.110510] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 2.110559] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 2.110562] pci 0000:00:02.0: PME# disabled [ 2.110585] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 2.110634] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.110638] pci 0000:00:03.0: PME# disabled [ 2.110663] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 2.110712] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.110716] pci 0000:00:07.0: PME# disabled [ 2.110740] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 2.110788] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 2.110792] pci 0000:00:08.0: PME# disabled [ 2.110815] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 2.110864] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.110868] pci 0000:00:09.0: PME# disabled [ 2.110891] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604 [ 2.110940] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 2.110943] pci 0000:00:0a.0: PME# disabled [ 2.110966] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 2.111036] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 2.111098] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 2.111165] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 2.111229] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 2.111297] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 2.111364] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 2.111427] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 2.111491] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 2.111505] pci 0000:00:16.0: reg 10: [mem 0xfbcd8000-0xfbcdbfff 64bit] [ 2.111575] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 2.111588] pci 0000:00:16.1: reg 10: [mem 0xfbcdc000-0xfbcdffff 64bit] [ 2.111655] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 2.111669] pci 0000:00:16.2: reg 10: [mem 0xfbce0000-0xfbce3fff 64bit] [ 2.111736] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 2.111750] pci 0000:00:16.3: reg 10: [mem 0xfbce4000-0xfbce7fff 64bit] [ 2.111817] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 2.111830] pci 0000:00:16.4: reg 10: [mem 0xfbce8000-0xfbcebfff 64bit] [ 2.111898] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 2.111911] pci 0000:00:16.5: reg 10: [mem 0xfbcec000-0xfbceffff 64bit] [ 2.111978] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 2.111992] pci 0000:00:16.6: reg 10: [mem 0xfbcf0000-0xfbcf3fff 64bit] [ 2.112060] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 2.112073] pci 0000:00:16.7: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] [ 2.112143] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 2.112187] pci 0000:00:1a.0: reg 20: [io 0xa400-0xa41f] [ 2.112235] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 2.112280] pci 0000:00:1a.1: reg 20: [io 0xa480-0xa49f] [ 2.112336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 2.112358] pci 0000:00:1a.7: reg 10: [mem 0xfbcfd000-0xfbcfd3ff] [ 2.112434] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.112438] pci 0000:00:1a.7: PME# disabled [ 2.112464] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 2.112479] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] [ 2.112536] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.112540] pci 0000:00:1b.0: PME# disabled [ 2.112562] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 2.112606] pci 0000:00:1d.0: reg 20: [io 0xa800-0xa81f] [ 2.112652] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 2.112696] pci 0000:00:1d.1: reg 20: [io 0xa880-0xa89f] [ 2.112742] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 2.112786] pci 0000:00:1d.2: reg 20: [io 0xac00-0xac1f] [ 2.112832] pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03 [ 2.112876] pci 0000:00:1d.3: reg 20: [io 0xb000-0xb01f] [ 2.112930] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 2.112952] pci 0000:00:1d.7: reg 10: [mem 0xfbcfe000-0xfbcfe3ff] [ 2.113028] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.113032] pci 0000:00:1d.7: PME# disabled [ 2.113055] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.113113] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 2.113198] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003) [ 2.113203] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003) [ 2.113239] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101 [ 2.113255] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07] [ 2.113264] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883] [ 2.113272] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807] [ 2.113281] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483] [ 2.113289] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb40f] [ 2.113298] pci 0000:00:1f.2: reg 24: [io 0xb080-0xb08f] [ 2.113336] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 2.113352] pci 0000:00:1f.3: reg 10: [mem 0xfbcff000-0xfbcff0ff 64bit] [ 2.113374] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 2.113408] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101 [ 2.113424] pci 0000:00:1f.5: reg 10: [io 0xcc00-0xcc07] [ 2.113432] pci 0000:00:1f.5: reg 14: [io 0xc880-0xc883] [ 2.113441] pci 0000:00:1f.5: reg 18: [io 0xc800-0xc807] [ 2.113449] pci 0000:00:1f.5: reg 1c: [io 0xc480-0xc483] [ 2.113458] pci 0000:00:1f.5: reg 20: [io 0xc400-0xc40f] [ 2.113466] pci 0000:00:1f.5: reg 24: [io 0xc080-0xc08f] [ 2.113553] pci 0000:08:00.0: [168c:002b] type 0 class 0x000280 [ 2.113572] pci 0000:08:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 2.113639] pci 0000:08:00.0: supports D1 [ 2.113641] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 2.113646] pci 0000:08:00.0: PME# disabled [ 2.127167] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.127173] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.127224] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.127275] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.127331] pci 0000:05:00.0: [1002:68f9] type 0 class 0x000300 [ 2.127346] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.127357] pci 0000:05:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit] [ 2.127365] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff] [ 2.127380] pci 0000:05:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref] [ 2.127399] pci 0000:05:00.0: supports D1 D2 [ 2.127422] pci 0000:05:00.1: [1002:aa68] type 0 class 0x000403 [ 2.127437] pci 0000:05:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 2.127486] pci 0000:05:00.1: supports D1 D2 [ 2.147126] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.147130] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.147135] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.147142] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.147188] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.147246] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.147291] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.147338] pci 0000:01:04.0: [1102:0007] type 0 class 0x000401 [ 2.147356] pci 0000:01:04.0: reg 10: [io 0xdc00-0xdc1f] [ 2.147424] pci 0000:01:04.0: supports D1 D2 [ 2.147465] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 2.147469] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.147477] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.147479] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.147482] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.147484] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 2.147487] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 2.147489] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 2.147522] pci 0000:00:01.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147531] pci 0000:00:01.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147535] pci 0000:08:00.0: Dev MPS 128 MPSS 128 MRRS 512 [ 2.147537] pci 0000:08:00.0: MPS configured higher than maximum supported by the device. If a bus issue occurs, try running with pci=pcie_bus_safe. [ 2.147553] pci 0000:08:00.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147557] pci 0000:00:02.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147565] pci 0000:00:02.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147569] pci 0000:00:03.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147578] pci 0000:00:03.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147581] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147589] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147593] pci 0000:05:00.0: Dev MPS 256 MPSS 256 MRRS 512 [ 2.147603] pci 0000:05:00.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147607] pci 0000:05:00.1: Dev MPS 256 MPSS 256 MRRS 512 [ 2.147618] pci 0000:05:00.1: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147622] pci 0000:00:08.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147630] pci 0000:00:08.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147634] pci 0000:00:09.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147642] pci 0000:00:09.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147646] pci 0000:00:0a.0: Dev MPS 128 MPSS 256 MRRS 128 [ 2.147654] pci 0000:00:0a.0: Dev MPS 256 MPSS 256 MRRS 128 [ 2.147658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.147864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.147952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 2.147978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT] [ 2.148004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 2.148036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 2.148067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE8._PRT] [ 2.148093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 2.148118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT] [ 2.148142] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.148145] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 2.148147] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.165823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.165869] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 2.165910] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) [ 2.165954] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.165998] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.166042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 2.166086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 2.166130] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15) [ 2.166259] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.166267] vgaarb: loaded [ 2.166268] vgaarb: bridge control possible 0000:05:00.0 [ 2.166444] SCSI subsystem initialized [ 2.166489] libata version 3.00 loaded. [ 2.166529] usbcore: registered new interface driver usbfs [ 2.166538] usbcore: registered new interface driver hub [ 2.166566] usbcore: registered new device driver usb [ 2.166683] wmi: Mapper loaded [ 2.166685] PCI: Using ACPI for IRQ routing [ 2.173080] PCI: Discovered peer bus fe [ 2.173107] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600 [ 2.173133] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600 [ 2.173160] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600 [ 2.173184] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600 [ 2.173209] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600 [ 2.173235] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600 [ 2.173260] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600 [ 2.173283] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600 [ 2.173307] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.173331] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.173356] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600 [ 2.173379] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600 [ 2.173403] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600 [ 2.173428] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600 [ 2.173454] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600 [ 2.173478] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600 [ 2.173501] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.173525] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.173551] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600 [ 2.173574] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600 [ 2.173598] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600 [ 2.173624] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600 [ 2.174090] PCI: Discovered peer bus ff [ 2.174116] pci 0000:ff:00.0: [8086:2c40] type 0 class 0x000600 [ 2.174137] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 2.174161] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 2.174182] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 2.174203] pci 0000:ff:02.4: [8086:2c14] type 0 class 0x000600 [ 2.174224] pci 0000:ff:02.5: [8086:2c15] type 0 class 0x000600 [ 2.174246] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 2.174269] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 2.174290] pci 0000:ff:03.2: [8086:2c1a] type 0 class 0x000600 [ 2.174311] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.174333] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 2.174353] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 2.174374] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 2.174395] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 2.174418] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 2.174441] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 2.174462] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.174482] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.174505] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 2.174526] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 2.174546] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 2.174567] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 2.175050] PCI: pci_cache_line_size set to 64 bytes [ 2.175264] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 2.175267] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 2.175358] NetLabel: Initializing [ 2.175360] NetLabel: domain hash size = 128 [ 2.175362] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.175375] NetLabel: unlabeled traffic allowed by default [ 2.175435] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.175441] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.175448] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.257034] Switching to clocksource hpet [ 2.265984] AppArmor: AppArmor Filesystem Enabled [ 2.266014] pnp: PnP ACPI init [ 2.266028] ACPI: bus type pnp registered [ 2.266152] pnp 00:00: [bus 00-ff] [ 2.266155] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.266157] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.266159] pnp 00:00: [io 0x0d00-0xffff window] [ 2.266161] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.266169] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.266171] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 2.266173] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 2.266261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.266272] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 2.266274] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 2.266276] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 2.266278] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 2.266280] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 2.266282] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 2.266406] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 2.266410] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 2.266412] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 2.266415] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 2.266426] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 2.266428] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 2.266432] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.266468] pnp 00:02: [dma 4] [ 2.266470] pnp 00:02: [io 0x0000-0x000f] [ 2.266473] pnp 00:02: [io 0x0081-0x0083] [ 2.266474] pnp 00:02: [io 0x0087] [ 2.266476] pnp 00:02: [io 0x0089-0x008b] [ 2.266478] pnp 00:02: [io 0x008f] [ 2.266479] pnp 00:02: [io 0x00c0-0x00df] [ 2.266513] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.266524] pnp 00:03: [io 0x0070-0x0071] [ 2.266536] pnp 00:03: [irq 8] [ 2.266564] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.266573] pnp 00:04: [io 0x0061] [ 2.266600] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.266609] pnp 00:05: [io 0x00f0-0x00ff] [ 2.266615] pnp 00:05: [irq 13] [ 2.266647] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.266804] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.266807] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 2.266809] pnp 00:06: [io 0x0290-0x029f] [ 2.266907] Switched to NOHz mode on CPU #0 [ 2.266916] Switched to NOHz mode on CPU #4 [ 2.266929] system 00:06: [io 0x0290-0x029f] has been reserved [ 2.266933] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.266943] Switched to NOHz mode on CPU #6 [ 2.266968] Switched to NOHz mode on CPU #7 [ 2.266974] Switched to NOHz mode on CPU #5 [ 2.266978] Switched to NOHz mode on CPU #2 [ 2.267030] Switched to NOHz mode on CPU #3 [ 2.267033] Switched to NOHz mode on CPU #1 [ 2.267048] pnp 00:07: [io 0x0010-0x001f] [ 2.267050] pnp 00:07: [io 0x0022-0x003f] [ 2.267052] pnp 00:07: [io 0x0044-0x005f] [ 2.267053] pnp 00:07: [io 0x0062-0x0063] [ 2.267055] pnp 00:07: [io 0x0065-0x006f] [ 2.267057] pnp 00:07: [io 0x0072-0x007f] [ 2.267059] pnp 00:07: [io 0x0080] [ 2.267060] pnp 00:07: [io 0x0084-0x0086] [ 2.267062] pnp 00:07: [io 0x0088] [ 2.267064] pnp 00:07: [io 0x008c-0x008e] [ 2.267066] pnp 00:07: [io 0x0090-0x009f] [ 2.267067] pnp 00:07: [io 0x00a2-0x00bf] [ 2.267069] pnp 00:07: [io 0x00e0-0x00ef] [ 2.267071] pnp 00:07: [io 0x04d0-0x04d1] [ 2.267073] pnp 00:07: [io 0x0ca0-0x0caf] [ 2.267074] pnp 00:07: [io 0x0800-0x087f] [ 2.267076] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 2.267078] pnp 00:07: [io 0x0500-0x057f] [ 2.267086] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 2.267088] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 2.267090] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 2.267198] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 2.267201] system 00:07: [io 0x0ca0-0x0caf] has been reserved [ 2.267204] system 00:07: [io 0x0800-0x087f] has been reserved [ 2.267206] system 00:07: [io 0x0500-0x057f] has been reserved [ 2.267210] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.267212] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.267215] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 2.267219] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.267273] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 2.267306] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.267515] pnp 00:09: [io 0x03f8-0x03ff] [ 2.267522] pnp 00:09: [irq 4] [ 2.267524] pnp 00:09: [dma 0 disabled] [ 2.267599] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.267805] pnp 00:0a: [io 0x02f8-0x02ff] [ 2.267812] pnp 00:0a: [irq 3] [ 2.267813] pnp 00:0a: [dma 0 disabled] [ 2.267915] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.267985] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 2.267987] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 2.268074] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.268077] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.268081] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.268138] pnp 00:0c: [io 0x0060] [ 2.268140] pnp 00:0c: [io 0x0064] [ 2.268146] pnp 00:0c: [irq 12] [ 2.268193] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 2.268230] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 2.268320] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 2.268324] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.268483] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 2.268486] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 2.268488] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 2.268490] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 2.268492] pnp 00:0e: [mem 0xfed90000-0xffffffff] [ 2.268593] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.268596] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 2.268599] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.268601] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.268604] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 2.268608] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.268730] pnp: PnP ACPI: found 15 devices [ 2.268732] ACPI: ACPI bus type pnp unregistered [ 2.276120] PCI: max bus depth: 1 pci_try_num: 2 [ 2.276181] pci 0000:00:01.0: PCI bridge to [bus 08-08] [ 2.276186] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.276193] pci 0000:00:02.0: PCI bridge to [bus 07-07] [ 2.276203] pci 0000:00:03.0: PCI bridge to [bus 06-06] [ 2.276212] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 2.276215] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 2.276220] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.276224] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.276230] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 2.276239] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 2.276248] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 2.276258] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 2.276261] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.276280] pci 0000:00:01.0: setting latency timer to 64 [ 2.276287] pci 0000:00:02.0: setting latency timer to 64 [ 2.276294] pci 0000:00:03.0: setting latency timer to 64 [ 2.276301] pci 0000:00:07.0: setting latency timer to 64 [ 2.276308] pci 0000:00:08.0: setting latency timer to 64 [ 2.276314] pci 0000:00:09.0: setting latency timer to 64 [ 2.276321] pci 0000:00:0a.0: setting latency timer to 64 [ 2.276328] pci 0000:00:1e.0: setting latency timer to 64 [ 2.276333] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.276335] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.276338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.276340] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 2.276342] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.276344] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.276347] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.276349] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.276351] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 2.276354] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.276357] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 2.276359] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 2.276362] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 2.276364] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 2.276366] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 2.276368] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.276370] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.276373] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 2.276375] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 2.276378] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 2.276380] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 2.276426] NET: Registered protocol family 2 [ 2.276692] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.277949] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.279952] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.280203] TCP: Hash tables configured (established 524288 bind 65536) [ 2.280205] TCP reno registered [ 2.280222] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.280269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.280446] NET: Registered protocol family 1 [ 2.280675] pci 0000:05:00.0: Boot video device [ 2.280764] PCI: CLS 256 bytes, default 64 [ 2.280822] Trying to unpack rootfs image as initramfs... [ 3.114688] Freeing initrd memory: 38656k freed [ 3.124415] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.124421] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000 [ 3.124423] software IO TLB at phys 0xbb77b000 - 0xbf77b000 [ 3.126013] audit: initializing netlink socket (disabled) [ 3.126030] type=2000 audit(1314590728.930:1): initialized [ 3.166366] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.213285] VFS: Disk quotas dquot_6.5.2 [ 3.213365] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.214070] fuse init (API version 7.17) [ 3.214185] msgmni has been set to 15947 [ 3.214496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.214530] io scheduler noop registered [ 3.214531] io scheduler deadline registered [ 3.214572] io scheduler cfq registered (default) [ 3.215126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.215150] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.215252] intel_idle: MWAIT substates: 0x1120 [ 3.215267] intel_idle: v0.4 model 0x1A [ 3.215269] intel_idle: lapic_timer_reliable_states 0x2 [ 3.215411] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.215417] ACPI: Power Button [PWRB] [ 3.215453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.215456] ACPI: Power Button [PWRF] [ 3.215671] ACPI: acpi_idle yielding to intel_idle [ 3.218788] ERST: get erange: -2 [ 3.218790] ERST: Failed to get Error Log Address Range. [ 3.324922] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 3.324994] \_SB_:_OSC evaluation returned wrong type [ 3.324996] _OSC request data:1 0 0 [ 3.325000] GHES: Failed to enable APEI firmware first mode. [ 3.325081] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.345583] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.584852] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 4.113262] Refined TSC clocksource calibration: 2133.408 MHz. [ 4.113268] Switching to clocksource tsc [ 8.534859] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.694409] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.843837] Linux agpgart interface v0.103 [ 8.845183] brd: module loaded [ 8.845846] loop: module loaded [ 8.846041] ata_piix 0000:00:1f.2: version 2.13 [ 8.846070] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.846079] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 8.846131] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 8.846362] scsi0 : ata_piix [ 8.846459] scsi1 : ata_piix [ 8.847413] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23 [ 8.847419] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23 [ 8.847446] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.847450] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 8.847490] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 8.847657] scsi2 : ata_piix [ 8.847731] scsi3 : ata_piix [ 8.848497] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 8.848501] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 8.848840] Fixed MDIO Bus: probed [ 8.848873] PPP generic driver version 2.4.2 [ 8.848917] tun: Universal TUN/TAP device driver, 1.6 [ 8.848919] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.849004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.849031] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.849052] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.849057] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.849100] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 8.849132] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.853026] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 8.853045] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcfd000 [ 8.873481] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.873618] hub 1-0:1.0: USB hub found [ 8.873623] hub 1-0:1.0: 4 ports detected [ 8.873725] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.873739] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.873743] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.873788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 8.873813] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.877693] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 8.877698] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfe000 [ 8.893441] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.893557] hub 2-0:1.0: USB hub found [ 8.893561] hub 2-0:1.0: 8 ports detected [ 8.893662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.893683] uhci_hcd: USB Universal Host Controller Interface driver [ 8.893719] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.893725] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.893729] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.893768] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.893802] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400 [ 8.893912] hub 3-0:1.0: USB hub found [ 8.893916] hub 3-0:1.0: 2 ports detected [ 8.894003] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.894009] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.894012] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.894060] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.894084] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480 [ 8.894196] hub 4-0:1.0: USB hub found [ 8.894200] hub 4-0:1.0: 2 ports detected [ 8.894288] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.894294] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.894298] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.894341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.894368] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800 [ 8.894475] hub 5-0:1.0: USB hub found [ 8.894479] hub 5-0:1.0: 2 ports detected [ 8.894570] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.894576] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.894579] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.894620] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.894652] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a880 [ 8.894759] hub 6-0:1.0: USB hub found [ 8.894763] hub 6-0:1.0: 2 ports detected [ 8.894846] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.894852] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.894855] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.894897] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 8.894921] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 [ 8.895026] hub 7-0:1.0: USB hub found [ 8.895030] hub 7-0:1.0: 2 ports detected [ 8.895115] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8.895121] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8.895124] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 8.895160] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 8.895184] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b000 [ 8.895296] hub 8-0:1.0: USB hub found [ 8.895300] hub 8-0:1.0: 2 ports detected [ 8.895438] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 8.895441] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 8.898101] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.898129] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.898247] mousedev: PS/2 mouse device common for all mice [ 8.898392] rtc_cmos 00:03: RTC can wake from S4 [ 8.898499] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.898524] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.898637] device-mapper: uevent: version 1.0.3 [ 8.898720] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 8.898800] device-mapper: multipath: version 1.3.0 loaded [ 8.898802] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.899073] cpuidle: using governor ladder [ 8.899353] cpuidle: using governor menu [ 8.899355] EFI Variables Facility v0.08 2004-May-17 [ 8.899625] TCP cubic registered [ 8.899770] NET: Registered protocol family 10 [ 8.900427] NET: Registered protocol family 17 [ 8.900445] Registering the dns_resolver key type [ 8.900813] PM: Hibernation image not present or could not be loaded. [ 8.900838] registered taskstats version 1 [ 8.924293] Magic number: 7:127:61 [ 8.924651] rtc_cmos 00:03: setting system clock to 2011-08-29 04:05:35 UTC (1314590735) [ 8.928285] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.928287] EDD information not available. [ 9.203911] ata3: SATA link down (SStatus 0 SControl 300) [ 9.214789] ata4: SATA link down (SStatus 0 SControl 300) [ 9.272824] usb 2-2: new high speed USB device number 3 using ehci_hcd [ 9.702008] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.702025] ata1.01: SATA link down (SStatus 0 SControl 300) [ 9.702204] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.702217] ata2.01: SATA link down (SStatus 0 SControl 300) [ 9.702229] ata2.01: link offline, clearing class 3 to NONE [ 9.711978] usb 5-1: new low speed USB device number 2 using uhci_hcd [ 9.722107] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 [ 9.722577] ata1.00: ATA-8: ST31000524AS, JC45, max UDMA/133 [ 9.722583] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 9.742429] ata1.00: configured for UDMA/133 [ 9.742824] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5 [ 9.743195] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.743344] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.743403] sd 0:0:0:0: [sda] Write Protect is off [ 9.743407] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.743432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.762034] ata2.00: configured for UDMA/100 [ 9.764297] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 [ 9.766915] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.766921] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.767129] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.767348] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.776998] sda: sda1 sda2 < sda5 > [ 9.778176] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.780742] Freeing unused kernel memory: 824k freed [ 9.780926] Write protecting the kernel read-only data: 12288k [ 9.789913] Freeing unused kernel memory: 1836k freed [ 9.796570] Freeing unused kernel memory: 1380k freed [ 9.821453] udev[105]: starting version 167 [ 9.859074] [drm] Initialized drm 1.1.0 20060810 [ 9.883544] [drm] radeon defaulting to kernel modesetting. [ 9.883547] [drm] radeon kernel modesetting enabled. [ 9.883668] radeon 0000:05:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 9.883673] radeon 0000:05:00.0: setting latency timer to 64 [ 9.883924] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340). [ 9.883975] [drm] register mmio base: 0xFBDC0000 [ 9.883977] [drm] register mmio size: 131072 [ 9.884153] ATOM BIOS: 113 [ 9.884230] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 9.884233] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 9.884238] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 9.884240] [drm] Detected VRAM RAM=1024M, BAR=256M [ 9.884242] [drm] RAM width 64bits DDR [ 9.884386] [TTM] Zone kernel: Available graphics memory: 4084572 kiB. [ 9.884390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 9.884393] [TTM] Initializing pool allocator. [ 9.884437] [drm] radeon: 1024M of VRAM memory ready [ 9.884440] [drm] radeon: 512M of GTT memory ready. [ 9.884456] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.884458] [drm] Driver supports precise vblank timestamp query. [ 9.884500] radeon 0000:05:00.0: irq 64 for MSI/MSI-X [ 9.884506] radeon 0000:05:00.0: radeon: using MSI. [ 9.884541] [drm] radeon: irq initialized. [ 9.884546] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 9.885338] [drm] Loading CEDAR Microcode [ 9.892762] radeon 0000:05:00.0: WB enabled [ 9.909592] [drm] ring test succeeded in 1 usecs [ 9.909728] [drm] radeon: ib pool ready. [ 9.909804] [drm] ib test succeeded in 0 usecs [ 9.909811] failed to evaluate ATIF got AE_BAD_PARAMETER [ 9.910061] [drm] Radeon Display Connectors [ 9.910062] [drm] Connector 0: [ 9.910064] [drm] HDMI-A [ 9.910065] [drm] HPD1 [ 9.910067] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 9.910069] [drm] Encoders: [ 9.910071] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.910072] [drm] Connector 1: [ 9.910074] [drm] DVI-I [ 9.910075] [drm] HPD4 [ 9.910077] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 9.910079] [drm] Encoders: [ 9.910080] [drm] DFP2: INTERNAL_UNIPHY [ 9.910082] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.910083] [drm] Connector 2: [ 9.910084] [drm] VGA [ 9.910086] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 9.910088] [drm] Encoders: [ 9.910089] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 9.920221] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 9.923534] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 9.923833] generic-usb 0003:05D5:0624.0001: input,hidraw0: USB HID v1.10 Keyboard [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input0 [ 9.939481] input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 [ 9.939763] generic-usb 0003:05D5:0624.0002: input,hidraw1: USB HID v1.10 Device [KB Multimedia keyboard ] on usb-0000:00:1d.0-1/input1 [ 9.939780] usbcore: registered new interface driver usbhid [ 9.939783] usbhid: USB HID core driver [ 9.973679] [drm] Radeon display connector DVI-I-1: Found valid EDID [ 9.983519] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 9.983544] [drm] Internal thermal controller with fan control [ 9.983592] [drm] radeon: power management initialized [ 9.984397] parse error at position 5 in video mode 'vesafb' [ 9.984399] parse error at position 5 in video mode 'vesafb' [ 9.984401] parse error at position 5 in video mode 'vesafb' [ 10.076379] [drm] fb mappable at 0xD0141000 [ 10.076382] [drm] vram apper at 0xD0000000 [ 10.076384] [drm] size 7299072 [ 10.076385] [drm] fb depth is 24 [ 10.076386] [drm] pitch is 6912 [ 10.076583] fbcon: radeondrmfb (fb0) is primary device [ 10.551356] Console: switching to colour frame buffer device 210x65 [ 10.555695] fb0: radeondrmfb frame buffer device [ 10.555697] drm: registered panic notifier [ 10.555703] [drm] Initialized radeon 2.11.0 20080528 for 0000:05:00.0 on minor 0 [ 10.951035] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 19.054009] udev[455]: starting version 167 [ 19.119813] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 19.410026] EDAC MC: Ver: 2.1.0 [ 19.441747] dca service started, version 1.12.1 [ 19.471164] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 19.471243] ioatdma 0000:00:16.0: enabling device (0000 -> 0002) [ 19.471265] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 19.471297] ioatdma 0000:00:16.0: setting latency timer to 64 [ 19.471339] ioatdma 0000:00:16.0: irq 65 for MSI/MSI-X [ 19.471549] ioatdma 0000:00:16.1: enabling device (0000 -> 0002) [ 19.471561] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 19.471580] ioatdma 0000:00:16.1: setting latency timer to 64 [ 19.471617] ioatdma 0000:00:16.1: irq 66 for MSI/MSI-X [ 19.471799] ioatdma 0000:00:16.2: enabling device (0000 -> 0002) [ 19.471810] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 19.471830] ioatdma 0000:00:16.2: setting latency timer to 64 [ 19.471865] ioatdma 0000:00:16.2: irq 67 for MSI/MSI-X [ 19.472143] ioatdma 0000:00:16.3: enabling device (0000 -> 0002) [ 19.472162] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 19.472206] ioatdma 0000:00:16.3: setting latency timer to 64 [ 19.472244] ioatdma 0000:00:16.3: irq 68 for MSI/MSI-X [ 19.472488] ioatdma 0000:00:16.4: enabling device (0000 -> 0002) [ 19.472493] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 19.472512] ioatdma 0000:00:16.4: setting latency timer to 64 [ 19.472547] ioatdma 0000:00:16.4: irq 69 for MSI/MSI-X [ 19.472759] ioatdma 0000:00:16.5: enabling device (0000 -> 0002) [ 19.472764] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 19.472783] ioatdma 0000:00:16.5: setting latency timer to 64 [ 19.472818] ioatdma 0000:00:16.5: irq 70 for MSI/MSI-X [ 19.473029] ioatdma 0000:00:16.6: enabling device (0000 -> 0002) [ 19.473034] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 19.473053] ioatdma 0000:00:16.6: setting latency timer to 64 [ 19.473089] ioatdma 0000:00:16.6: irq 71 for MSI/MSI-X [ 19.473299] ioatdma 0000:00:16.7: enabling device (0000 -> 0002) [ 19.473304] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 19.473325] ioatdma 0000:00:16.7: setting latency timer to 64 [ 19.473362] ioatdma 0000:00:16.7: irq 72 for MSI/MSI-X [ 19.536762] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0 [ 19.536787] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED) [ 19.536831] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 19.536844] EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 19.536847] EDAC i7core: Driver loaded. [ 19.546191] type=1400 audit(1314590746.129:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=798 comm="apparmor_parser" [ 19.546257] type=1400 audit(1314590746.129:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser" [ 19.546314] type=1400 audit(1314590746.129:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser" [ 19.995318] lp: driver loaded but no devices found [ 20.012629] type=1400 audit(1314590746.599:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1056 comm="apparmor_parser" [ 20.016398] type=1400 audit(1314590746.599:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1049 comm="apparmor_parser" [ 20.025575] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 20.043968] ipmi message handler version 39.2 [ 20.054317] ipmi device interface [ 20.075897] type=1400 audit(1314590746.659:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1057 comm="apparmor_parser" [ 20.105783] type=1400 audit(1314590746.689:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1053 comm="apparmor_parser" [ 20.125351] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.125414] snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X [ 20.125443] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.200523] hda-intel: no codecs found! [ 20.200602] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 20.200655] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 20.200968] snd_hda_intel 0000:05:00.1: irq 73 for MSI/MSI-X [ 20.200993] snd_hda_intel 0000:05:00.1: setting latency timer to 64 [ 20.225968] Linux video capture interface: v2.00 [ 20.251754] type=1400 audit(1314590746.839:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1050 comm="apparmor_parser" [ 20.251826] type=1400 audit(1314590746.839:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1050 comm="apparmor_parser" [ 20.251884] type=1400 audit(1314590746.839:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1050 comm="apparmor_parser" [ 20.288240] IPMI System Interface driver. [ 20.288304] ipmi_si: probing via SMBIOS [ 20.288307] ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0 [ 20.288309] ipmi_si: Adding SMBIOS-specified kcs state machine [ 20.288313] ipmi_si: probing via SPMI [ 20.288315] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 20.288317] ipmi_si: Adding SPMI-specified kcs state machine [ 20.288320] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0 [ 20.288324] ipmi_si: Could not set up I/O space [ 20.303982] cfg80211: Calling CRDA to update world regulatory domain [ 20.309255] cfg80211: World regulatory domain updated: [ 20.309258] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.309262] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.309264] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.309267] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.309269] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.309272] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.320261] ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 20.320274] ipmi_si: Interface detection failed [ 20.363132] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.363579] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:07.0/0000:05:00.1/sound/card0/input4 [ 20.552441] coretemp coretemp.0: TjMax is 97 C. [ 20.552500] coretemp coretemp.0: TjMax is 97 C. [ 20.552691] coretemp coretemp.0: TjMax is 97 C. [ 20.552714] coretemp coretemp.0: TjMax is 97 C. [ 20.552842] coretemp coretemp.4: TjMax is 97 C. [ 20.552859] coretemp coretemp.4: TjMax is 97 C. [ 20.552873] coretemp coretemp.4: TjMax is 97 C. [ 20.552887] coretemp coretemp.4: TjMax is 97 C. [ 20.646509] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 20.691963] w83627ehf: Found W83667HG chip at 0x290 [ 21.034841] ath9k 0000:08:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 21.034853] ath9k 0000:08:00.0: setting latency timer to 64 [ 21.061010] snd_ca0106 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.061031] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 21.084035] ath: EEPROM regdomain: 0x809c [ 21.084039] ath: EEPROM indicates we should expect a country code [ 21.084041] ath: doing EEPROM country->regdmn map search [ 21.084043] ath: country maps to regdmn code: 0x52 [ 21.084045] ath: Country alpha2 being used: CN [ 21.084047] ath: Regpair used: 0x52 [ 21.084050] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.084053] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084055] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.084058] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084060] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.084063] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084065] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.084068] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084070] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.084072] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084074] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.084077] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084079] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.084082] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084084] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.084086] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084088] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.084091] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084093] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.084095] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084097] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.084100] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.084102] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.084104] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.084107] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.085659] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.085662] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085664] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.085667] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085669] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.085672] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085674] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.085676] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085679] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.085681] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085683] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.085686] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085688] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.085690] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085692] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.085695] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085697] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.085700] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085702] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.085704] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085706] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.085709] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085711] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 21.085714] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085716] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 21.085718] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.085721] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 21.085723] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 21.088605] i2c i2c-8: Found w83795adg rev. B at 0x2f [ 21.116038] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 21.118157] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input6 [ 21.118320] usbcore: registered new interface driver uvcvideo [ 21.118323] USB Video Class driver (1.1.1) [ 21.126399] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 21.127147] cfg80211: Calling CRDA for country: CN [ 21.127311] Registered led device: ath9k-phy0 [ 21.127316] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011820000, irq=28 [ 21.130589] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.130593] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130596] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.130599] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130601] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.130604] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130606] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.130609] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130611] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.130614] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130616] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.130618] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130620] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.130623] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130625] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.130628] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130630] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.130632] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130634] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.130637] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130639] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.130642] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130644] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 21.130646] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130648] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 21.130651] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 21.130653] cfg80211: Disabling freq 2484 MHz [ 21.130657] cfg80211: Regulatory domain changed to country: CN [ 21.130659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.130661] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.130664] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 21.180154] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.283006] ppdev: user-space parallel port driver [ 21.348107] w83795 8-002f: PECI agent 1 Tbase temperature: 85 [ 21.358276] w83795 8-002f: PECI agent 2 Tbase temperature: 85 [ 21.676717] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 21.890750] Adding 19529724k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:19529724k [ 22.979494] wlan0: authenticate with 00:26:b8:18:ff:90 (try 1) [ 22.981434] wlan0: authenticated [ 23.002175] wlan0: associate with 00:26:b8:18:ff:90 (try 1) [ 23.005229] wlan0: RX AssocResp from 00:26:b8:18:ff:90 (capab=0x431 status=0 aid=3) [ 23.005233] wlan0: associated [ 23.006252] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 23.184668] cfg80211: Calling CRDA for country: US [ 23.188506] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.188510] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188513] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.188516] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188518] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.188521] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188523] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.188526] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188528] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.188530] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188532] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.188535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188537] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.188540] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188542] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.188545] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188547] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.188549] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188551] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.188554] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188556] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.188559] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 23.188561] cfg80211: Disabling freq 2467 MHz [ 23.188562] cfg80211: Disabling freq 2472 MHz [ 23.188564] cfg80211: Disabling freq 2484 MHz [ 23.188568] cfg80211: Regulatory domain changed to country: US [ 23.188570] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.188572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.188575] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 23.188577] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.188580] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.188582] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.188584] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 24.124729] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.854960] audit_printk_skb: 12 callbacks suppressed [ 25.854963] type=1400 audit(1314590752.449:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1051 comm="apparmor_parser" [ 25.856015] type=1400 audit(1314590752.449:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1051 comm="apparmor_parser" [ 25.856385] type=1400 audit(1314590752.449:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1051 comm="apparmor_parser" ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 4:10 ` Pavel Ivanov @ 2011-08-29 5:22 ` Huang Ying 2011-08-29 14:43 ` Pavel Ivanov 0 siblings, 1 reply; 27+ messages in thread From: Huang Ying @ 2011-08-29 5:22 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On 08/29/2011 12:10 PM, Pavel Ivanov wrote: > On Sun, Aug 28, 2011 at 9:15 PM, Huang Ying <ying.huang@intel.com> wrote: >> Hi, Pavel, >> >> On 08/27/2011 11:28 AM, Pavel Ivanov wrote: >>> Huang, >>> >>> I can confirm that new patch got rid of the old error message but >>> introduced a new one: >>> >>> ERST: Failed to get Error Log Address Range >> >> Please try the attached patch to find why there is the error message. > > dmesg after the patch is in attachment. -ENOENT is returned for apei_exec_run(, ACPI_ERST_GET_ERROR_RANGE). That is there is no instructions for mandatory action ACPI_ERST_GET_ERROR_RANGE. It should be a firmware bug, try raise it to firmware vendor? Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 5:22 ` Huang Ying @ 2011-08-29 14:43 ` Pavel Ivanov 0 siblings, 0 replies; 27+ messages in thread From: Pavel Ivanov @ 2011-08-29 14:43 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On Mon, Aug 29, 2011 at 1:22 AM, Huang Ying <ying.huang@intel.com> wrote: > -ENOENT is returned for apei_exec_run(, ACPI_ERST_GET_ERROR_RANGE). > That is there is no instructions for mandatory action > ACPI_ERST_GET_ERROR_RANGE. It should be a firmware bug, try raise it to > firmware vendor? Could you please advise me on how should I do that? Do I need to report this issue to my motherboard vendor (which is Asus)? If yes then should it be via the standard technical support channel (like http://vip.asus.com/eservice/techserv.aspx) or something more special? Thank you, Pavel -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs @ 2011-08-29 14:43 ` Pavel Ivanov 0 siblings, 0 replies; 27+ messages in thread From: Pavel Ivanov @ 2011-08-29 14:43 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On Mon, Aug 29, 2011 at 1:22 AM, Huang Ying <ying.huang@intel.com> wrote: > -ENOENT is returned for apei_exec_run(, ACPI_ERST_GET_ERROR_RANGE). > That is there is no instructions for mandatory action > ACPI_ERST_GET_ERROR_RANGE. It should be a firmware bug, try raise it to > firmware vendor? Could you please advise me on how should I do that? Do I need to report this issue to my motherboard vendor (which is Asus)? If yes then should it be via the standard technical support channel (like http://vip.asus.com/eservice/techserv.aspx) or something more special? Thank you, Pavel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 14:43 ` Pavel Ivanov (?) @ 2011-08-30 0:55 ` Huang Ying -1 siblings, 0 replies; 27+ messages in thread From: Huang Ying @ 2011-08-30 0:55 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On 08/29/2011 10:43 PM, Pavel Ivanov wrote: > On Mon, Aug 29, 2011 at 1:22 AM, Huang Ying <ying.huang@intel.com> wrote: >> -ENOENT is returned for apei_exec_run(, ACPI_ERST_GET_ERROR_RANGE). >> That is there is no instructions for mandatory action >> ACPI_ERST_GET_ERROR_RANGE. It should be a firmware bug, try raise it to >> firmware vendor? > > Could you please advise me on how should I do that? Do I need to > report this issue to my motherboard vendor (which is Asus)? If yes > then should it be via the standard technical support channel (like > http://vip.asus.com/eservice/techserv.aspx) or something more special? Sorry, I don't know how to do that too. Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-27 3:28 ` Pavel Ivanov 2011-08-29 1:15 ` Huang Ying @ 2011-08-29 5:37 ` Huang Ying 2011-09-03 2:44 ` Pavel Ivanov 1 sibling, 1 reply; 27+ messages in thread From: Huang Ying @ 2011-08-29 5:37 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On 08/27/2011 11:28 AM, Pavel Ivanov wrote: > Huang, > > I can confirm that new patch got rid of the old error message but > introduced a new one: > > ERST: Failed to get Error Log Address Range > > Also I noticed there's another suspicious message in dmesg and it was > there earlier too (although it's not shown on console): > > GHES: Failed to enable APEI firmware first mode > > Is it bad? What does it mean? Maybe this has been fixed, please this patch, https://lkml.org/lkml/2011/8/11/297 Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-08-29 5:37 ` Huang Ying @ 2011-09-03 2:44 ` Pavel Ivanov 2011-09-05 2:05 ` Huang Ying 0 siblings, 1 reply; 27+ messages in thread From: Pavel Ivanov @ 2011-09-03 2:44 UTC (permalink / raw) To: Huang Ying; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On Mon, Aug 29, 2011 at 1:37 AM, Huang Ying <ying.huang@intel.com> wrote: > On 08/27/2011 11:28 AM, Pavel Ivanov wrote: >> Also I noticed there's another suspicious message in dmesg and it was >> there earlier too (although it's not shown on console): >> >> GHES: Failed to enable APEI firmware first mode >> >> Is it bad? What does it mean? > > Maybe this has been fixed, please this patch, > > https://lkml.org/lkml/2011/8/11/297 Yes, this patch indeed fixed this failure message. It's now replaced by GHES: APEI firmware first mode is enabled by WHEA _OSC. Can I ask you another question: what does the following message mean? [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. Pavel P.S. No word from Asus yet on the ERST issue. ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2011-09-03 2:44 ` Pavel Ivanov @ 2011-09-05 2:05 ` Huang Ying 0 siblings, 0 replies; 27+ messages in thread From: Huang Ying @ 2011-09-05 2:05 UTC (permalink / raw) To: Pavel Ivanov; +Cc: Bjorn Helgaas, linux-kernel, linux-acpi On 09/03/2011 10:44 AM, Pavel Ivanov wrote: > On Mon, Aug 29, 2011 at 1:37 AM, Huang Ying <ying.huang@intel.com> wrote: >> On 08/27/2011 11:28 AM, Pavel Ivanov wrote: >>> Also I noticed there's another suspicious message in dmesg and it was >>> there earlier too (although it's not shown on console): >>> >>> GHES: Failed to enable APEI firmware first mode >>> >>> Is it bad? What does it mean? >> >> Maybe this has been fixed, please this patch, >> >> https://lkml.org/lkml/2011/8/11/297 > > Yes, this patch indeed fixed this failure message. It's now replaced by > > GHES: APEI firmware first mode is enabled by WHEA _OSC. > > Can I ask you another question: what does the following message mean? > > [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error > source: 1, disabled. This means: The generic hardware error source with ID 1 is notified by poll, that is, Linux should poll the specified address to check whether there is hardware error report from hardware. But the poll interval specified by firmware is "0". I think this should be a firmware error, and disabled it. I think maybe you can contact firmware vendor to fix this. Best Regards, Huang Ying ^ permalink raw reply [flat|nested] 27+ messages in thread
[parent not found: <fa.VBW83nzmCUJkL7i8PnQCE+XJLbw@ifi.uio.no>]
[parent not found: <fa.tJPpWxTvpszc3I1v45J3M2ECj9E@ifi.uio.no>]
[parent not found: <fa.tL8DWu2lMG0ACwU85eZnSJgwW4c@ifi.uio.no>]
[parent not found: <fa.ND4Vxr1bDKbI4wO4Neh3v3LnNi8@ifi.uio.no>]
[parent not found: <fa.ujRlmAar6Re/yHHbpRR2c1B+waM@ifi.uio.no>]
[parent not found: <fa.Wg29YXcB/Uo8sZJfJS4lt54jnMc@ifi.uio.no>]
* Re: APEI: Can not request iomem region for GARs [not found] ` <fa.Wg29YXcB/Uo8sZJfJS4lt54jnMc@ifi.uio.no> @ 2012-01-18 16:20 ` lucas.gary 2012-01-18 17:03 ` Bjorn Helgaas 0 siblings, 1 reply; 27+ messages in thread From: lucas.gary @ 2012-01-18 16:20 UTC (permalink / raw) To: fa.linux.kernel; +Cc: linux-acpi Hi, I'm just googling this problem. I've just ran a preupgrade on my box (Supermicro 7046A) and I'm now getting this on boot: Loading Linux 3.1.9-1.fc16.x86_64 ... Loading initial ramdisk ... [2.135273] APEI: Can not request iomem region region <00000000bf795eba-00000000bf795ebc> for GARS It always ran this message but now on reboot it's halting at the message. I realize this isn't a kernel support forum but it's the only place I've seen the message being discussed. Does anyone know of kernel arguments I could pass in to disable the request (based on what I understand this has never worked so presumably there's no impact to disabling the function). Or if there's some bios setting that would allow the function to succeed. I'm going to post this in the FC16 support forum as well as the supermicro support forum and if I find anything interesting I'll follow up from there if anyone is interested? ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: APEI: Can not request iomem region for GARs 2012-01-18 16:20 ` lucas.gary @ 2012-01-18 17:03 ` Bjorn Helgaas 0 siblings, 0 replies; 27+ messages in thread From: Bjorn Helgaas @ 2012-01-18 17:03 UTC (permalink / raw) To: fa.linux.kernel; +Cc: linux-acpi, lucas.gary, Huang Ying On Wed, Jan 18, 2012 at 9:20 AM, <lucas.gary@gmail.com> wrote: > I've just ran a preupgrade on my box (Supermicro 7046A) and I'm now getting this on boot: > > Loading Linux 3.1.9-1.fc16.x86_64 ... > Loading initial ramdisk ... > [2.135273] APEI: Can not request iomem region region <00000000bf795eba-00000000bf795ebc> for GARS > > It always ran this message but now on reboot it's halting at the message. I'd be surprised if we actually halted right at that message. I think it's just that most console output is suppressed by default, this particular message is KERN_ERR so it is not suppressed, and we hung somewhere later. Can you boot with "ignore_loglevel" and collect the entire console output? If you have a previous working kernel still installed, a corresponding log from it might also be useful. Bjorn ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2012-01-18 17:03 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-17 3:43 APEI: Can not request iomem region for GARs Pavel Ivanov
2011-08-19 21:48 ` Bjorn Helgaas
2011-08-22 5:43 ` Huang Ying
2011-08-22 7:12 ` Huang Ying
2011-08-22 16:45 ` Bjorn Helgaas
2011-08-22 21:04 ` Yinghai Lu
2011-08-23 0:32 ` Huang Ying
2011-08-25 2:45 ` Pavel Ivanov
2011-08-26 4:13 ` Huang Ying
2011-08-26 13:43 ` Bjorn Helgaas
2011-08-26 13:43 ` Bjorn Helgaas
2011-08-29 1:27 ` Huang Ying
2011-08-29 14:48 ` Bjorn Helgaas
2011-08-29 14:48 ` Bjorn Helgaas
2011-08-30 0:57 ` Huang Ying
2011-08-27 3:28 ` Pavel Ivanov
2011-08-29 1:15 ` Huang Ying
2011-08-29 4:10 ` Pavel Ivanov
2011-08-29 5:22 ` Huang Ying
2011-08-29 14:43 ` Pavel Ivanov
2011-08-29 14:43 ` Pavel Ivanov
2011-08-30 0:55 ` Huang Ying
2011-08-29 5:37 ` Huang Ying
2011-09-03 2:44 ` Pavel Ivanov
2011-09-05 2:05 ` Huang Ying
[not found] <fa.VBW83nzmCUJkL7i8PnQCE+XJLbw@ifi.uio.no>
[not found] ` <fa.tJPpWxTvpszc3I1v45J3M2ECj9E@ifi.uio.no>
[not found] ` <fa.tL8DWu2lMG0ACwU85eZnSJgwW4c@ifi.uio.no>
[not found] ` <fa.ND4Vxr1bDKbI4wO4Neh3v3LnNi8@ifi.uio.no>
[not found] ` <fa.ujRlmAar6Re/yHHbpRR2c1B+waM@ifi.uio.no>
[not found] ` <fa.Wg29YXcB/Uo8sZJfJS4lt54jnMc@ifi.uio.no>
2012-01-18 16:20 ` lucas.gary
2012-01-18 17:03 ` Bjorn Helgaas
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.