* Fetcher failure for URL
@ 2017-12-26 3:42 Hou, Yong
2017-12-26 8:50 ` Zoran Stojsavljevic
0 siblings, 1 reply; 6+ messages in thread
From: Hou, Yong @ 2017-12-26 3:42 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 4790 bytes --]
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available"
Inside the bb file, there are following descriptions for this URL:
SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git
myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master
I have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'
ERROR: Function failed: Fetcher failure for URL: 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt other sources if available
WARNING: Renaming /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks
SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
file://0008-Header-and-payload-logging-fixed.patch \
file://0009-Enabled-mutex-priority-inheritance.patch \
file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
file://10-tmp-dlt.conf \
"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
regards
Yong
[-- Attachment #2: Type: text/html, Size: 6039 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fetcher failure for URL
2017-12-26 3:42 Fetcher failure for URL Hou, Yong
@ 2017-12-26 8:50 ` Zoran Stojsavljevic
2017-12-28 3:13 ` 答复: " Hou, Yong
0 siblings, 1 reply; 6+ messages in thread
From: Zoran Stojsavljevic @ 2017-12-26 8:50 UTC (permalink / raw)
To: Hou, Yong; +Cc: yocto
> Inside the bb file, there are following descriptions for this URL:
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Interesting problem, for the sake of expertise/exercise I wanted to
reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer
on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example
[user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon
drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script
[user@localhost recipes-example]$ cd dlt-daemon/
[user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb
[user@localhost dlt-daemon]$
The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
And I did modify it, in order for disable some inheritance I do not
have. Concisely I know it will not configure, but the aim was just to
see if I can
download it via bitbake script.
With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
DEPENDS = "dbus zlib"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https"
S = "${WORKDIR}/git"
## inherit gzipnative autotools gettext cmake systemd
inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd"
SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service"
SYSTEMD_AUTO_ENABLE_${PN} = "enable"
SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
dlt-dbus.service \
dlt-adaptor-udp.service \
dlt-receive.service"
SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}
It did indeed downloaded (CLI follows below as proof), but failed to
configure (understandable, gzipnative does not exist in reference
poky):
[user@localhost 2.15.0-r0]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0
[user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS
-rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in
drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
-rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING
-rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc
drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples
drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git
-rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore
drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
-rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL
-rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--. 1 user user 2629 Dec 26 09:00 README
-rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests
drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
file://0002-Don-t-execute-processes-as-a-specific-user.patch \
file://0004-Modify-systemd-config-directory.patch \
"
S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI,
but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
On Tue, Dec 26, 2017 at 4:42 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
> Hello all,
>
>
> When i build the project based on yocto 2.0.2 using bitbake tool, i
> encountered one fetch error :
>
> "Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
> attempting MIRRORS if available"
>
>
> Inside the bb file, there are following descriptions for this URL:
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
>
> Then i tried to fetch it manually as below, source code can be downloaded
> successfully and commit id is also correct.
> myproject$git clone git://github.com/GENIVI/dlt-daemon.git
>
> myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
> e9a486a08fff6d3cc7133a350cec3ee10f463207
> * master
>
>
> I have no idea why such issue occurred for this URL when i use bitbake for
> build.
>
> Thanks for help.
>
>
> Following is the detail error log:
>
>
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
> NOTE: Running task 687 of 5699 (ID: 5344,
> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
> do_install)
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
> NOTE: Running task 688 of 5699 (ID: 5345,
> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
> do_populate_sysroot)
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
> Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
> Succeeded
> NOTE: Running task 689 of 5699 (ID: 569,
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
> do_fetch)
> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
> WARNING: Failed to fetch URL
> git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
> available
> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
> Cloning into bare repository
> '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
> fatal: Unable to find remote helper for 'https'
>
> ERROR: Function failed: Fetcher failure for URL:
> 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
> from any source.
> ERROR: Logfile of failure stored in:
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
> ERROR: Task 569
> (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
> do_fetch) failed with exit code '1'
> NOTE: Running task 690 of 5699 (ID: 3025,
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,
> do_fetch)
> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
> WARNING: Checksum failure encountered with download of
> http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
> other sources if available
> WARNING: Renaming
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
> to
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
> NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
> NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
> NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
> NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
> NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
> NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
> NOTE: Sending SIGTERM to remaining 1 tasks
>
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
> file://0004-Modify-systemd-config-directory.patch \
>
> file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
> file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
>
> file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
> file://0008-Header-and-payload-logging-fixed.patch \
> file://0009-Enabled-mutex-priority-inheritance.patch \
> file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
> file://10-tmp-dlt.conf \
> "
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
>
> regards
>
> Yong
>
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* 答复: Fetcher failure for URL
2017-12-26 8:50 ` Zoran Stojsavljevic
@ 2017-12-28 3:13 ` Hou, Yong
2017-12-28 4:38 ` Zoran Stojsavljevic
0 siblings, 1 reply; 6+ messages in thread
From: Hou, Yong @ 2017-12-28 3:13 UTC (permalink / raw)
To: Zoran Stojsavljevic; +Cc: yocto
hello Zoran,
thanks for your reply. I tried with your bb file, but there is still same problem.
I suspect error may be caused by the "protocol=https", then I changed to
"git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.
Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al
total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..
-rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS
-rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in
-rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in
-rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.in
drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
-rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt
-rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING
-rw-r--r-- 1 yong yong 426 12月 28 10:55 distfiles
drwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc
drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples
drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git
-rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignore
drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0
drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
-rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL
-rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSE
drwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches
drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc
-rw-r--r-- 1 yong yong 2629 12月 28 10:55 README
-rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
drwxr-xr-x 15 yong yong 4096 12月 28 10:55 src
drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd
drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests
drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts
________________________________________
发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: yocto@yoctoproject.org
主题: Re: [yocto] Fetcher failure for URL
> Inside the bb file, there are following descriptions for this URL:
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Interesting problem, for the sake of expertise/exercise I wanted to
reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer
on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example
[user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon
drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script
[user@localhost recipes-example]$ cd dlt-daemon/
[user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb
[user@localhost dlt-daemon]$
The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
And I did modify it, in order for disable some inheritance I do not
have. Concisely I know it will not configure, but the aim was just to
see if I can
download it via bitbake script.
With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
DEPENDS = "dbus zlib"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https"
S = "${WORKDIR}/git"
## inherit gzipnative autotools gettext cmake systemd
inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd"
SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service"
SYSTEMD_AUTO_ENABLE_${PN} = "enable"
SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
dlt-dbus.service \
dlt-adaptor-udp.service \
dlt-receive.service"
SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}
It did indeed downloaded (CLI follows below as proof), but failed to
configure (understandable, gzipnative does not exist in reference
poky):
[user@localhost 2.15.0-r0]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0
[user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS
-rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in
drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
-rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING
-rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc
drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples
drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git
-rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore
drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
-rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL
-rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--. 1 user user 2629 Dec 26 09:00 README
-rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd
drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests
drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
file://0002-Don-t-execute-processes-as-a-specific-user.patch \
file://0004-Modify-systemd-config-directory.patch \
"
S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI,
but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
On Tue, Dec 26, 2017 at 4:42 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
> Hello all,
>
>
> When i build the project based on yocto 2.0.2 using bitbake tool, i
> encountered one fetch error :
>
> "Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
> attempting MIRRORS if available"
>
>
> Inside the bb file, there are following descriptions for this URL:
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
>
> Then i tried to fetch it manually as below, source code can be downloaded
> successfully and commit id is also correct.
> myproject$git clone git://github.com/GENIVI/dlt-daemon.git
>
> myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
> e9a486a08fff6d3cc7133a350cec3ee10f463207
> * master
>
>
> I have no idea why such issue occurred for this URL when i use bitbake for
> build.
>
> Thanks for help.
>
>
> Following is the detail error log:
>
>
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
> NOTE: Running task 687 of 5699 (ID: 5344,
> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
> do_install)
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
> NOTE: Running task 688 of 5699 (ID: 5345,
> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
> do_populate_sysroot)
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
> Started
> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
> Succeeded
> NOTE: Running task 689 of 5699 (ID: 569,
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
> do_fetch)
> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
> WARNING: Failed to fetch URL
> git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
> available
> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
> Cloning into bare repository
> '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
> fatal: Unable to find remote helper for 'https'
>
> ERROR: Function failed: Fetcher failure for URL:
> 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
> from any source.
> ERROR: Logfile of failure stored in:
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
> ERROR: Task 569
> (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
> do_fetch) failed with exit code '1'
> NOTE: Running task 690 of 5699 (ID: 3025,
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,
> do_fetch)
> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
> WARNING: Checksum failure encountered with download of
> http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
> other sources if available
> WARNING: Renaming
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
> to
> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
> NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
> NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
> NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
> NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
> NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
> NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
> NOTE: Sending SIGTERM to remaining 1 tasks
>
>
> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
> file://0004-Modify-systemd-config-directory.patch \
>
> file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
> file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
>
> file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
> file://0008-Header-and-payload-logging-fixed.patch \
> file://0009-Enabled-mutex-priority-inheritance.patch \
> file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
> file://10-tmp-dlt.conf \
> "
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
>
> regards
>
> Yong
>
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 答复: Fetcher failure for URL
2017-12-28 3:13 ` 答复: " Hou, Yong
@ 2017-12-28 4:38 ` Zoran Stojsavljevic
2017-12-28 5:15 ` 答复: " Hou, Yong
0 siblings, 1 reply; 6+ messages in thread
From: Zoran Stojsavljevic @ 2017-12-28 4:38 UTC (permalink / raw)
To: Hou, Yong; +Cc: yocto
> I suspect error may be caused by the "protocol=https", then I changed to
> "git://github.com/GENIVI/dlt-daemon.git;branch=master"...
Good observation. I use clones as close as to the latest HEAD (span
from few days to several weeks).
Which does not explain what are the differences between poky distro
2.0.2 (used by you) and latest 2.4. In most cases, developers are
using much more stable releases. So this mystery is still unsolved.
With respect to the Real World out there.
Zoran
On Thu, Dec 28, 2017 at 4:13 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
> hello Zoran,
>
> thanks for your reply. I tried with your bb file, but there is still same problem.
> I suspect error may be caused by the "protocol=https", then I changed to
> "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
> Fortunately there is no problem any more . Following is the result by using this change:
> But i do not know the real root cause, if some one can let me understand it it will be very nice.
>
> Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al
> total 156
> drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
> drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..
> -rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS
> -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in
> -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in
> -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.in
> drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
> -rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt
> -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING
> -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfiles
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc
> drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples
> drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git
> -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignore
> drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
> -rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL
> -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSE
> drwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches
> drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc
> -rw-r--r-- 1 yong yong 2629 12月 28 10:55 README
> -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
> drwxr-xr-x 15 yong yong 4096 12月 28 10:55 src
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests
> drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts
>
> ________________________________________
> 发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
> 发送时间: 2017年12月26日 16:50
> 收件人: Hou, Yong
> 抄送: yocto@yoctoproject.org
> 主题: Re: [yocto] Fetcher failure for URL
>
>> Inside the bb file, there are following descriptions for this URL:
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
> Interesting problem, for the sake of expertise/exercise I wanted to
> reproduce it in poky/referent YOCTO Project distro.
>
> So I did create the dlp-daemon entry in my meta-mylayer, added layer
> on the top of poky 3 layers for such of the experiment:
>
> user@localhost recipes-example]$ pwd
> /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example
> [user@localhost recipes-example]$ ls -al
> total 16
> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
> drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon
> drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script
> [user@localhost recipes-example]$ cd dlt-daemon/
> [user@localhost dlt-daemon]$ ls -al
> total 16
> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
> -rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb
> [user@localhost dlt-daemon]$
>
> The bb recipe I took from:
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
>
> And I did modify it, in order for disable some inheritance I do not
> have. Concisely I know it will not configure, but the aim was just to
> see if I can
> download it via bitbake script.
>
> With the following in my modified recipe:
>
> HOMEPAGE = "https://www.genivi.org/"
> SECTION = "console/utils"
> LICENSE = "MPLv2"
> LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
>
> DEPENDS = "dbus zlib"
>
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https"
> S = "${WORKDIR}/git"
>
> ## inherit gzipnative autotools gettext cmake systemd
> inherit autotools gettext cmake systemd
>
> PACKAGES += "${PN}-systemd"
> SYSTEMD_PACKAGES = "${PN} ${PN}-systemd"
> SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service"
> SYSTEMD_AUTO_ENABLE_${PN} = "enable"
> SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
> dlt-dbus.service \
> dlt-adaptor-udp.service \
> dlt-receive.service"
> SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
>
> EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
>
> FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
>
> do_install_append() {
> rm -f ${D}${bindir}/dlt-test-*
> }
>
> It did indeed downloaded (CLI follows below as proof), but failed to
> configure (understandable, gzipnative does not exist in reference
> poky):
>
> [user@localhost 2.15.0-r0]$ pwd
> /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0
> [user@localhost 2.15.0-r0]$ cd git
> [user@localhost git]$ ls -al
> total 148
> drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
> drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
> -rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS
> -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in
> -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in
> -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in
> drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
> -rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt
> -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING
> -rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc
> drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples
> drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git
> -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore
> drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
> -rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL
> -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE
> -rw-r--r--. 1 user user 2629 Dec 26 09:00 README
> -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
> drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests
> drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
> [user@localhost git]$
>
> The download problem become visible with the original master recipe:
>
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
> file://0002-Don-t-execute-processes-as-a-specific-user.patch \
> file://0004-Modify-systemd-config-directory.patch \
> "
> S = "${WORKDIR}/git"
>
> Patch 0002 did not download. The same as you had for the original URI,
> but, in my case, it was just a 0002. ... .patch.
>
> Hope this helps.
>
> Zoran
>
> On Tue, Dec 26, 2017 at 4:42 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
>> Hello all,
>>
>>
>> When i build the project based on yocto 2.0.2 using bitbake tool, i
>> encountered one fetch error :
>>
>> "Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
>> attempting MIRRORS if available"
>>
>>
>> Inside the bb file, there are following descriptions for this URL:
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>
>>
>> Then i tried to fetch it manually as below, source code can be downloaded
>> successfully and commit id is also correct.
>> myproject$git clone git://github.com/GENIVI/dlt-daemon.git
>>
>> myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
>> e9a486a08fff6d3cc7133a350cec3ee10f463207
>> * master
>>
>>
>> I have no idea why such issue occurred for this URL when i use bitbake for
>> build.
>>
>> Thanks for help.
>>
>>
>> Following is the detail error log:
>>
>>
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
>> NOTE: Running task 687 of 5699 (ID: 5344,
>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>> do_install)
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
>> NOTE: Running task 688 of 5699 (ID: 5345,
>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>> do_populate_sysroot)
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>> Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>> Succeeded
>> NOTE: Running task 689 of 5699 (ID: 569,
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>> do_fetch)
>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
>> WARNING: Failed to fetch URL
>> git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
>> available
>> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
>> Cloning into bare repository
>> '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
>> fatal: Unable to find remote helper for 'https'
>>
>> ERROR: Function failed: Fetcher failure for URL:
>> 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
>> from any source.
>> ERROR: Logfile of failure stored in:
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
>> ERROR: Task 569
>> (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>> do_fetch) failed with exit code '1'
>> NOTE: Running task 690 of 5699 (ID: 3025,
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,
>> do_fetch)
>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
>> WARNING: Checksum failure encountered with download of
>> http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
>> other sources if available
>> WARNING: Renaming
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
>> to
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
>> NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
>> NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
>> NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
>> NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
>> NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
>> NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
>> NOTE: Sending SIGTERM to remaining 1 tasks
>>
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
>> file://0004-Modify-systemd-config-directory.patch \
>>
>> file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
>> file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
>>
>> file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
>> file://0008-Header-and-payload-logging-fixed.patch \
>> file://0009-Enabled-mutex-priority-inheritance.patch \
>> file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
>> file://10-tmp-dlt.conf \
>> "
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>
>>
>> regards
>>
>> Yong
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* 答复: 答复: Fetcher failure for URL
2017-12-28 4:38 ` Zoran Stojsavljevic
@ 2017-12-28 5:15 ` Hou, Yong
2017-12-28 7:10 ` Zoran Stojsavljevic
0 siblings, 1 reply; 6+ messages in thread
From: Hou, Yong @ 2017-12-28 5:15 UTC (permalink / raw)
To: Zoran Stojsavljevic; +Cc: yocto
I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
"PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
and the issue is resolved completely.
so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.
regards
Yong
________________________________________
发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
发送时间: 2017年12月28日 12:38
收件人: Hou, Yong
抄送: yocto@yoctoproject.org
主题: Re: 答复: [yocto] Fetcher failure for URL
> I suspect error may be caused by the "protocol=https", then I changed to
> "git://github.com/GENIVI/dlt-daemon.git;branch=master"...
Good observation. I use clones as close as to the latest HEAD (span
from few days to several weeks).
Which does not explain what are the differences between poky distro
2.0.2 (used by you) and latest 2.4. In most cases, developers are
using much more stable releases. So this mystery is still unsolved.
With respect to the Real World out there.
Zoran
On Thu, Dec 28, 2017 at 4:13 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
> hello Zoran,
>
> thanks for your reply. I tried with your bb file, but there is still same problem.
> I suspect error may be caused by the "protocol=https", then I changed to
> "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
> Fortunately there is no problem any more . Following is the result by using this change:
> But i do not know the real root cause, if some one can let me understand it it will be very nice.
>
> Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al
> total 156
> drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
> drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..
> -rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS
> -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in
> -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in
> -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.in
> drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
> -rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt
> -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING
> -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfiles
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc
> drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples
> drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git
> -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignore
> drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
> -rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL
> -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSE
> drwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches
> drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc
> -rw-r--r-- 1 yong yong 2629 12月 28 10:55 README
> -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
> drwxr-xr-x 15 yong yong 4096 12月 28 10:55 src
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd
> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests
> drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts
>
> ________________________________________
> 发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
> 发送时间: 2017年12月26日 16:50
> 收件人: Hou, Yong
> 抄送: yocto@yoctoproject.org
> 主题: Re: [yocto] Fetcher failure for URL
>
>> Inside the bb file, there are following descriptions for this URL:
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>
> Interesting problem, for the sake of expertise/exercise I wanted to
> reproduce it in poky/referent YOCTO Project distro.
>
> So I did create the dlp-daemon entry in my meta-mylayer, added layer
> on the top of poky 3 layers for such of the experiment:
>
> user@localhost recipes-example]$ pwd
> /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example
> [user@localhost recipes-example]$ ls -al
> total 16
> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
> drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon
> drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script
> [user@localhost recipes-example]$ cd dlt-daemon/
> [user@localhost dlt-daemon]$ ls -al
> total 16
> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
> -rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb
> [user@localhost dlt-daemon]$
>
> The bb recipe I took from:
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
>
> And I did modify it, in order for disable some inheritance I do not
> have. Concisely I know it will not configure, but the aim was just to
> see if I can
> download it via bitbake script.
>
> With the following in my modified recipe:
>
> HOMEPAGE = "https://www.genivi.org/"
> SECTION = "console/utils"
> LICENSE = "MPLv2"
> LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
>
> DEPENDS = "dbus zlib"
>
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https"
> S = "${WORKDIR}/git"
>
> ## inherit gzipnative autotools gettext cmake systemd
> inherit autotools gettext cmake systemd
>
> PACKAGES += "${PN}-systemd"
> SYSTEMD_PACKAGES = "${PN} ${PN}-systemd"
> SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service"
> SYSTEMD_AUTO_ENABLE_${PN} = "enable"
> SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
> dlt-dbus.service \
> dlt-adaptor-udp.service \
> dlt-receive.service"
> SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
>
> EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
>
> FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
>
> do_install_append() {
> rm -f ${D}${bindir}/dlt-test-*
> }
>
> It did indeed downloaded (CLI follows below as proof), but failed to
> configure (understandable, gzipnative does not exist in reference
> poky):
>
> [user@localhost 2.15.0-r0]$ pwd
> /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0
> [user@localhost 2.15.0-r0]$ cd git
> [user@localhost git]$ ls -al
> total 148
> drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
> drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
> -rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS
> -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in
> -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in
> -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in
> drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
> -rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt
> -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING
> -rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc
> drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples
> drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git
> -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore
> drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
> -rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL
> -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE
> -rw-r--r--. 1 user user 2629 Dec 26 09:00 README
> -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
> drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd
> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests
> drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
> [user@localhost git]$
>
> The download problem become visible with the original master recipe:
>
> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
> file://0002-Don-t-execute-processes-as-a-specific-user.patch \
> file://0004-Modify-systemd-config-directory.patch \
> "
> S = "${WORKDIR}/git"
>
> Patch 0002 did not download. The same as you had for the original URI,
> but, in my case, it was just a 0002. ... .patch.
>
> Hope this helps.
>
> Zoran
>
> On Tue, Dec 26, 2017 at 4:42 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
>> Hello all,
>>
>>
>> When i build the project based on yocto 2.0.2 using bitbake tool, i
>> encountered one fetch error :
>>
>> "Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
>> attempting MIRRORS if available"
>>
>>
>> Inside the bb file, there are following descriptions for this URL:
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>
>>
>> Then i tried to fetch it manually as below, source code can be downloaded
>> successfully and commit id is also correct.
>> myproject$git clone git://github.com/GENIVI/dlt-daemon.git
>>
>> myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
>> e9a486a08fff6d3cc7133a350cec3ee10f463207
>> * master
>>
>>
>> I have no idea why such issue occurred for this URL when i use bitbake for
>> build.
>>
>> Thanks for help.
>>
>>
>> Following is the detail error log:
>>
>>
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
>> NOTE: Running task 687 of 5699 (ID: 5344,
>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>> do_install)
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
>> NOTE: Running task 688 of 5699 (ID: 5345,
>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>> do_populate_sysroot)
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>> Started
>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>> Succeeded
>> NOTE: Running task 689 of 5699 (ID: 569,
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>> do_fetch)
>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
>> WARNING: Failed to fetch URL
>> git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
>> available
>> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
>> Cloning into bare repository
>> '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
>> fatal: Unable to find remote helper for 'https'
>>
>> ERROR: Function failed: Fetcher failure for URL:
>> 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
>> from any source.
>> ERROR: Logfile of failure stored in:
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
>> ERROR: Task 569
>> (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>> do_fetch) failed with exit code '1'
>> NOTE: Running task 690 of 5699 (ID: 3025,
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,
>> do_fetch)
>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
>> WARNING: Checksum failure encountered with download of
>> http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
>> other sources if available
>> WARNING: Renaming
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
>> to
>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
>> NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
>> NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
>> NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
>> NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
>> NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
>> NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
>> NOTE: Sending SIGTERM to remaining 1 tasks
>>
>>
>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
>> file://0004-Modify-systemd-config-directory.patch \
>>
>> file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
>> file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
>>
>> file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
>> file://0008-Header-and-payload-logging-fixed.patch \
>> file://0009-Enabled-mutex-priority-inheritance.patch \
>> file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
>> file://10-tmp-dlt.conf \
>> "
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>
>>
>> regards
>>
>> Yong
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 答复: 答复: Fetcher failure for URL
2017-12-28 5:15 ` 答复: " Hou, Yong
@ 2017-12-28 7:10 ` Zoran Stojsavljevic
0 siblings, 0 replies; 6+ messages in thread
From: Zoran Stojsavljevic @ 2017-12-28 7:10 UTC (permalink / raw)
To: Hou, Yong; +Cc: yocto
> I think i got the root cause that in my environment "https protocol"
> does not link to git-remote-https tool , I edit my bash profile file in\
> ~/.bash_profile : "PATH=$PATH:/usr/lib/git-core" where the
> git-remote-https installed. and the issue is resolved completely.
Interesting... ?! I use Fedora 27 as a host, and git-core/ is not in
my PATH variable either.
[user@localhost bin]$ uname -r
4.14.8-300.fc27.x86_64
[user@localhost bin]$ echo $PATH
/usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin
[user@localhost usr]$ find . -name git-remote-https
./libexec/git-core/git-remote-https
[user@localhost usr]$ which git-remote-https
/usr/bin/which: no git-remote-https in
(/usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin)
[user@localhost usr]$
But for me initial method works.
Anyway, thank you for sharing your solution (one more thing to consider).
Zoran
_______
On Thu, Dec 28, 2017 at 6:15 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
> I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
> "PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
> and the issue is resolved completely.
>
> so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.
>
> regards
> Yong
>
> ________________________________________
> 发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
> 发送时间: 2017年12月28日 12:38
> 收件人: Hou, Yong
> 抄送: yocto@yoctoproject.org
> 主题: Re: 答复: [yocto] Fetcher failure for URL
>
>> I suspect error may be caused by the "protocol=https", then I changed to
>> "git://github.com/GENIVI/dlt-daemon.git;branch=master"...
>
> Good observation. I use clones as close as to the latest HEAD (span
> from few days to several weeks).
>
> Which does not explain what are the differences between poky distro
> 2.0.2 (used by you) and latest 2.4. In most cases, developers are
> using much more stable releases. So this mystery is still unsolved.
> With respect to the Real World out there.
>
> Zoran
>
> On Thu, Dec 28, 2017 at 4:13 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
>> hello Zoran,
>>
>> thanks for your reply. I tried with your bb file, but there is still same problem.
>> I suspect error may be caused by the "protocol=https", then I changed to
>> "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
>> Fortunately there is no problem any more . Following is the result by using this change:
>> But i do not know the real root cause, if some one can let me understand it it will be very nice.
>>
>> Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al
>> total 156
>> drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
>> drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..
>> -rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS
>> -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in
>> -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in
>> -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.in
>> drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
>> -rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt
>> -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING
>> -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfiles
>> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc
>> drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples
>> drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git
>> -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignore
>> drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0
>> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
>> -rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL
>> -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSE
>> drwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches
>> drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc
>> -rw-r--r-- 1 yong yong 2629 12月 28 10:55 README
>> -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
>> drwxr-xr-x 15 yong yong 4096 12月 28 10:55 src
>> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd
>> drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests
>> drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts
>>
>> ________________________________________
>> 发件人: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
>> 发送时间: 2017年12月26日 16:50
>> 收件人: Hou, Yong
>> 抄送: yocto@yoctoproject.org
>> 主题: Re: [yocto] Fetcher failure for URL
>>
>>> Inside the bb file, there are following descriptions for this URL:
>>>
>>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>
>> Interesting problem, for the sake of expertise/exercise I wanted to
>> reproduce it in poky/referent YOCTO Project distro.
>>
>> So I did create the dlp-daemon entry in my meta-mylayer, added layer
>> on the top of poky 3 layers for such of the experiment:
>>
>> user@localhost recipes-example]$ pwd
>> /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example
>> [user@localhost recipes-example]$ ls -al
>> total 16
>> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
>> drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
>> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon
>> drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script
>> [user@localhost recipes-example]$ cd dlt-daemon/
>> [user@localhost dlt-daemon]$ ls -al
>> total 16
>> drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
>> drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
>> -rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb
>> [user@localhost dlt-daemon]$
>>
>> The bb recipe I took from:
>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
>>
>> And I did modify it, in order for disable some inheritance I do not
>> have. Concisely I know it will not configure, but the aim was just to
>> see if I can
>> download it via bitbake script.
>>
>> With the following in my modified recipe:
>>
>> HOMEPAGE = "https://www.genivi.org/"
>> SECTION = "console/utils"
>> LICENSE = "MPLv2"
>> LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
>>
>> DEPENDS = "dbus zlib"
>>
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https"
>> S = "${WORKDIR}/git"
>>
>> ## inherit gzipnative autotools gettext cmake systemd
>> inherit autotools gettext cmake systemd
>>
>> PACKAGES += "${PN}-systemd"
>> SYSTEMD_PACKAGES = "${PN} ${PN}-systemd"
>> SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service"
>> SYSTEMD_AUTO_ENABLE_${PN} = "enable"
>> SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
>> dlt-dbus.service \
>> dlt-adaptor-udp.service \
>> dlt-receive.service"
>> SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
>>
>> EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
>>
>> FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
>>
>> do_install_append() {
>> rm -f ${D}${bindir}/dlt-test-*
>> }
>>
>> It did indeed downloaded (CLI follows below as proof), but failed to
>> configure (understandable, gzipnative does not exist in reference
>> poky):
>>
>> [user@localhost 2.15.0-r0]$ pwd
>> /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0
>> [user@localhost 2.15.0-r0]$ cd git
>> [user@localhost git]$ ls -al
>> total 148
>> drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
>> drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
>> -rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS
>> -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in
>> -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in
>> -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in
>> drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
>> -rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt
>> -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING
>> -rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles
>> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc
>> drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples
>> drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git
>> -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore
>> drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0
>> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
>> -rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL
>> -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE
>> -rw-r--r--. 1 user user 2629 Dec 26 09:00 README
>> -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
>> drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src
>> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd
>> drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests
>> drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
>> [user@localhost git]$
>>
>> The download problem become visible with the original master recipe:
>>
>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>> SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
>> file://0002-Don-t-execute-processes-as-a-specific-user.patch \
>> file://0004-Modify-systemd-config-directory.patch \
>> "
>> S = "${WORKDIR}/git"
>>
>> Patch 0002 did not download. The same as you had for the original URI,
>> but, in my case, it was just a 0002. ... .patch.
>>
>> Hope this helps.
>>
>> Zoran
>>
>> On Tue, Dec 26, 2017 at 4:42 AM, Hou, Yong <Yong_Hou@mentor.com> wrote:
>>> Hello all,
>>>
>>>
>>> When i build the project based on yocto 2.0.2 using bitbake tool, i
>>> encountered one fetch error :
>>>
>>> "Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
>>> attempting MIRRORS if available"
>>>
>>>
>>> Inside the bb file, there are following descriptions for this URL:
>>>
>>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https"
>>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>>
>>>
>>> Then i tried to fetch it manually as below, source code can be downloaded
>>> successfully and commit id is also correct.
>>> myproject$git clone git://github.com/GENIVI/dlt-daemon.git
>>>
>>> myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
>>> e9a486a08fff6d3cc7133a350cec3ee10f463207
>>> * master
>>>
>>>
>>> I have no idea why such issue occurred for this URL when i use bitbake for
>>> build.
>>>
>>> Thanks for help.
>>>
>>>
>>> Following is the detail error log:
>>>
>>>
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
>>> NOTE: Running task 687 of 5699 (ID: 5344,
>>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>>> do_install)
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
>>> NOTE: Running task 688 of 5699 (ID: 5345,
>>> virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,
>>> do_populate_sysroot)
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>>> Started
>>> NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
>>> Succeeded
>>> NOTE: Running task 689 of 5699 (ID: 569,
>>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>>> do_fetch)
>>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
>>> WARNING: Failed to fetch URL
>>> git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
>>> available
>>> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
>>> Cloning into bare repository
>>> '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
>>> fatal: Unable to find remote helper for 'https'
>>>
>>> ERROR: Function failed: Fetcher failure for URL:
>>> 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
>>> from any source.
>>> ERROR: Logfile of failure stored in:
>>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
>>> NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
>>> ERROR: Task 569
>>> (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,
>>> do_fetch) failed with exit code '1'
>>> NOTE: Running task 690 of 5699 (ID: 3025,
>>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,
>>> do_fetch)
>>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
>>> NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
>>> WARNING: Checksum failure encountered with download of
>>> http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
>>> other sources if available
>>> WARNING: Renaming
>>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
>>> to
>>> /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
>>> NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
>>> NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
>>> NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
>>> NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
>>> NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
>>> NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
>>> NOTE: Sending SIGTERM to remaining 1 tasks
>>>
>>>
>>> SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
>>> file://0004-Modify-systemd-config-directory.patch \
>>>
>>> file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
>>> file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
>>>
>>> file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
>>> file://0008-Header-and-payload-logging-fixed.patch \
>>> file://0009-Enabled-mutex-priority-inheritance.patch \
>>> file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
>>> file://10-tmp-dlt.conf \
>>> "
>>> SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
>>>
>>>
>>> regards
>>>
>>> Yong
>>>
>>>
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-12-28 7:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-26 3:42 Fetcher failure for URL Hou, Yong
2017-12-26 8:50 ` Zoran Stojsavljevic
2017-12-28 3:13 ` 答复: " Hou, Yong
2017-12-28 4:38 ` Zoran Stojsavljevic
2017-12-28 5:15 ` 答复: " Hou, Yong
2017-12-28 7:10 ` Zoran Stojsavljevic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.