From: Zhaoyang Huang <huangzhaoyang@gmail.com>
To: kernel test robot <oliver.sang@intel.com>
Cc: "zhaoyang.huang" <zhaoyang.huang@unisoc.com>,
lkp@lists.01.org, lkp@intel.com, linux-mm@kvack.org,
Andrew Morton <akpm@linux-foundation.org>,
Matthew Wilcox <willy@infradead.org>,
Vlastimil Babka <vbabka@suse.cz>,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
ke.wang@unisoc.com, steve.kang@unisoc.com
Subject: Re: [mm] 0e949320db: BUG:kernel_NULL_pointer_dereference,address
Date: Wed, 12 Oct 2022 15:36:54 +0800 [thread overview]
Message-ID: <CAGWkznHr-dOdq0MG0DTz6XwEU8LpxURK-7jmHw2+7K0PMSOk3A@mail.gmail.com> (raw)
In-Reply-To: <202210121406.d4ebc9bc-oliver.sang@intel.com>
This is introduced by a very early kmemleak_alloc before kmemleak_init
which gets an object from mem_pool, which could not be produced on my
v5.4 based environment, sorry for the disturbance. I would like to
send a fixup later.
On Wed, Oct 12, 2022 at 2:34 PM kernel test robot <oliver.sang@intel.com> wrote:
>
>
> Greeting,
>
> FYI, we noticed the following commit (built with gcc-11):
>
> commit: 0e949320dbee7ffe242b1a9b4fc59661e954e6e5 ("[Resend PATCH] mm: use stack_depot for recording kmemleak's backtrace")
> url: https://github.com/intel-lab-lkp/linux/commits/zhaoyang-huang/mm-use-stack_depot-for-recording-kmemleak-s-backtrace/20221011-091833
> base: https://git.kernel.org/cgit/linux/kernel/git/akpm/mm.git mm-everything
> patch link: https://lore.kernel.org/linux-mm/1665450964-27487-1-git-send-email-zhaoyang.huang@unisoc.com
> patch subject: [Resend PATCH] mm: use stack_depot for recording kmemleak's backtrace
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
> +---------------------------------------------+------------+------------+
> | | 029cc2b410 | 0e949320db |
> +---------------------------------------------+------------+------------+
> | boot_successes | 6 | 0 |
> | boot_failures | 0 | 6 |
> | BUG:kernel_NULL_pointer_dereference,address | 0 | 6 |
> | Oops:#[##] | 0 | 6 |
> | RIP:__stack_depot_save | 0 | 6 |
> | Kernel_panic-not_syncing:Fatal_exception | 0 | 6 |
> +---------------------------------------------+------------+------------+
>
>
> If you fix the issue, kindly add following tag
> | Reported-by: kernel test robot <oliver.sang@intel.com>
> | Link: https://lore.kernel.org/r/202210121406.d4ebc9bc-oliver.sang@intel.com
>
>
> [ 0.244585][ T0] BUG: kernel NULL pointer dereference, address: 0000000000000000
> [ 0.246464][ T0] #PF: supervisor read access in kernel mode
> [ 0.247823][ T0] #PF: error_code(0x0000) - not-present page
> [ 0.249179][ T0] PGD 0 P4D 0
> [ 0.249986][ T0] Oops: 0000 [#1] SMP PTI
> [ 0.251025][ T0] CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc3-00707-g0e949320dbee #4
> [ 0.252895][ T0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
> [ 0.255242][ T0] RIP: 0010:__stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:452)
> [ 0.256583][ T0] Code: 03 48 c7 c7 ec 17 b3 84 e8 91 e8 85 ff 44 89 e0 23 05 74 a8 01 03 48 8d 04 c3 48 89 c3 48 89 c7 48 89 44 24 28 e8 d4 f9 85 ff <4c> 8b 33 4d 85 f6 0f 84 b6 00 00 00 8b 04 24 83 e8 01 48 8d 04 c5
> All code
> ========
> 0: 03 48 c7 add -0x39(%rax),%ecx
> 3: c7 (bad)
> 4: ec in (%dx),%al
> 5: 17 (bad)
> 6: b3 84 mov $0x84,%bl
> 8: e8 91 e8 85 ff callq 0xffffffffff85e89e
> d: 44 89 e0 mov %r12d,%eax
> 10: 23 05 74 a8 01 03 and 0x301a874(%rip),%eax # 0x301a88a
> 16: 48 8d 04 c3 lea (%rbx,%rax,8),%rax
> 1a: 48 89 c3 mov %rax,%rbx
> 1d: 48 89 c7 mov %rax,%rdi
> 20: 48 89 44 24 28 mov %rax,0x28(%rsp)
> 25: e8 d4 f9 85 ff callq 0xffffffffff85f9fe
> 2a:* 4c 8b 33 mov (%rbx),%r14 <-- trapping instruction
> 2d: 4d 85 f6 test %r14,%r14
> 30: 0f 84 b6 00 00 00 je 0xec
> 36: 8b 04 24 mov (%rsp),%eax
> 39: 83 e8 01 sub $0x1,%eax
> 3c: 48 rex.W
> 3d: 8d .byte 0x8d
> 3e: 04 c5 add $0xc5,%al
>
> Code starting with the faulting instruction
> ===========================================
> 0: 4c 8b 33 mov (%rbx),%r14
> 3: 4d 85 f6 test %r14,%r14
> 6: 0f 84 b6 00 00 00 je 0xc2
> c: 8b 04 24 mov (%rsp),%eax
> f: 83 e8 01 sub $0x1,%eax
> 12: 48 rex.W
> 13: 8d .byte 0x8d
> 14: 04 c5 add $0xc5,%al
> [ 0.261023][ T0] RSP: 0000:ffffffff83603ca8 EFLAGS: 00010046
> [ 0.262337][ T0] RAX: ffffffff83613cd8 RBX: 0000000000000000 RCX: ffffffff81b16f8c
> [ 0.264139][ T0] RDX: 0000000000000b64 RSI: 0000000000000000 RDI: 0000000000000000
> [ 0.265948][ T0] RBP: 00000000c5a6b597 R08: ffffffff8479d118 R09: 0000000000000000
> [ 0.267668][ T0] R10: 0000000000000004 R11: 0001ffffffffffff R12: 0000000027b2cd0a
> [ 0.269492][ T0] R13: 0000000000000003 R14: 000000004954f68c R15: ffffffff83603d54
> [ 0.271315][ T0] FS: 0000000000000000(0000) GS:ffffffff842c9000(0000) knlGS:0000000000000000
> [ 0.273215][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.274736][ T0] CR2: 0000000000000000 CR3: 000000000360a000 CR4: 00000000000406b0
> [ 0.276558][ T0] Call Trace:
> [ 0.277339][ T0] <TASK>
> [ 0.278031][ T0] stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:534)
> [ 0.279163][ T0] set_track_prepare (kbuild/src/x86_64-2/mm/slub.c:752)
> [ 0.280296][ T0] ? memblock_alloc_range_nid (kbuild/src/x86_64-2/mm/memblock.c:1424)
> [ 0.281692][ T0] ? memblock_alloc_internal (kbuild/src/x86_64-2/mm/memblock.c:1514)
> [ 0.282985][ T0] ? memblock_alloc_try_nid (kbuild/src/x86_64-2/mm/memblock.c:1614 (discriminator 3))
> [ 0.286557][ T0] ? setup_command_line (kbuild/src/x86_64-2/init/main.c:631)
> [ 0.287706][ T0] ? start_kernel (kbuild/src/x86_64-2/init/main.c:965)
> [ 0.288803][ T0] ? secondary_startup_64_no_verify (kbuild/src/x86_64-2/arch/x86/kernel/head_64.S:358)
> [ 0.290257][ T0] ? __raw_callee_save___native_queued_spin_unlock (??:?)
> [ 0.291867][ T0] ? write_comp_data (kbuild/src/x86_64-2/kernel/kcov.c:236)
> [ 0.292883][ T0] ? strncpy (kbuild/src/x86_64-2/lib/string.c:115)
> [ 0.293763][ T0] __create_object (kbuild/src/x86_64-2/mm/kmemleak.c:681)
> [ 0.294761][ T0] kmemleak_alloc_phys (kbuild/src/x86_64-2/mm/kmemleak.c:1212)
> [ 0.295882][ T0] memblock_alloc_range_nid (kbuild/src/x86_64-2/mm/memblock.c:1424)
> [ 0.297105][ T0] memblock_alloc_internal (kbuild/src/x86_64-2/mm/memblock.c:1514)
> [ 0.298293][ T0] memblock_alloc_try_nid (kbuild/src/x86_64-2/mm/memblock.c:1614 (discriminator 3))
> [ 0.299516][ T0] setup_command_line (kbuild/src/x86_64-2/init/main.c:631)
> [ 0.300691][ T0] start_kernel (kbuild/src/x86_64-2/init/main.c:965)
> [ 0.301806][ T0] ? load_ucode_bsp (kbuild/src/x86_64-2/arch/x86/kernel/cpu/microcode/core.c:176)
> [ 0.302954][ T0] secondary_startup_64_no_verify (kbuild/src/x86_64-2/arch/x86/kernel/head_64.S:358)
> [ 0.304315][ T0] </TASK>
> [ 0.305039][ T0] Modules linked in:
> [ 0.305938][ T0] CR2: 0000000000000000
> [ 0.306882][ T0] ---[ end trace 0000000000000000 ]---
> [ 0.307913][ T0] RIP: 0010:__stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:452)
> [ 0.309033][ T0] Code: 03 48 c7 c7 ec 17 b3 84 e8 91 e8 85 ff 44 89 e0 23 05 74 a8 01 03 48 8d 04 c3 48 89 c3 48 89 c7 48 89 44 24 28 e8 d4 f9 85 ff <4c> 8b 33 4d 85 f6 0f 84 b6 00 00 00 8b 04 24 83 e8 01 48 8d 04 c5
> All code
> ========
> 0: 03 48 c7 add -0x39(%rax),%ecx
> 3: c7 (bad)
> 4: ec in (%dx),%al
> 5: 17 (bad)
> 6: b3 84 mov $0x84,%bl
> 8: e8 91 e8 85 ff callq 0xffffffffff85e89e
> d: 44 89 e0 mov %r12d,%eax
> 10: 23 05 74 a8 01 03 and 0x301a874(%rip),%eax # 0x301a88a
> 16: 48 8d 04 c3 lea (%rbx,%rax,8),%rax
> 1a: 48 89 c3 mov %rax,%rbx
> 1d: 48 89 c7 mov %rax,%rdi
> 20: 48 89 44 24 28 mov %rax,0x28(%rsp)
> 25: e8 d4 f9 85 ff callq 0xffffffffff85f9fe
> 2a:* 4c 8b 33 mov (%rbx),%r14 <-- trapping instruction
> 2d: 4d 85 f6 test %r14,%r14
> 30: 0f 84 b6 00 00 00 je 0xec
> 36: 8b 04 24 mov (%rsp),%eax
> 39: 83 e8 01 sub $0x1,%eax
> 3c: 48 rex.W
> 3d: 8d .byte 0x8d
> 3e: 04 c5 add $0xc5,%al
>
> Code starting with the faulting instruction
> ===========================================
> 0: 4c 8b 33 mov (%rbx),%r14
> 3: 4d 85 f6 test %r14,%r14
> 6: 0f 84 b6 00 00 00 je 0xc2
> c: 8b 04 24 mov (%rsp),%eax
> f: 83 e8 01 sub $0x1,%eax
> 12: 48 rex.W
> 13: 8d .byte 0x8d
> 14: 04 c5 add $0xc5,%al
>
>
> To reproduce:
>
> # build kernel
> cd linux
> cp config-6.0.0-rc3-00707-g0e949320dbee .config
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
>
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Zhaoyang Huang <huangzhaoyang@gmail.com>
To: lkp@lists.01.org
Subject: Re: [mm] 0e949320db: BUG:kernel_NULL_pointer_dereference, address
Date: Wed, 12 Oct 2022 15:36:54 +0800 [thread overview]
Message-ID: <CAGWkznHr-dOdq0MG0DTz6XwEU8LpxURK-7jmHw2+7K0PMSOk3A@mail.gmail.com> (raw)
In-Reply-To: <202210121406.d4ebc9bc-oliver.sang@intel.com>
[-- Attachment #1: Type: text/plain, Size: 10246 bytes --]
This is introduced by a very early kmemleak_alloc before kmemleak_init
which gets an object from mem_pool, which could not be produced on my
v5.4 based environment, sorry for the disturbance. I would like to
send a fixup later.
On Wed, Oct 12, 2022 at 2:34 PM kernel test robot <oliver.sang@intel.com> wrote:
>
>
> Greeting,
>
> FYI, we noticed the following commit (built with gcc-11):
>
> commit: 0e949320dbee7ffe242b1a9b4fc59661e954e6e5 ("[Resend PATCH] mm: use stack_depot for recording kmemleak's backtrace")
> url: https://github.com/intel-lab-lkp/linux/commits/zhaoyang-huang/mm-use-stack_depot-for-recording-kmemleak-s-backtrace/20221011-091833
> base: https://git.kernel.org/cgit/linux/kernel/git/akpm/mm.git mm-everything
> patch link: https://lore.kernel.org/linux-mm/1665450964-27487-1-git-send-email-zhaoyang.huang(a)unisoc.com
> patch subject: [Resend PATCH] mm: use stack_depot for recording kmemleak's backtrace
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
> +---------------------------------------------+------------+------------+
> | | 029cc2b410 | 0e949320db |
> +---------------------------------------------+------------+------------+
> | boot_successes | 6 | 0 |
> | boot_failures | 0 | 6 |
> | BUG:kernel_NULL_pointer_dereference,address | 0 | 6 |
> | Oops:#[##] | 0 | 6 |
> | RIP:__stack_depot_save | 0 | 6 |
> | Kernel_panic-not_syncing:Fatal_exception | 0 | 6 |
> +---------------------------------------------+------------+------------+
>
>
> If you fix the issue, kindly add following tag
> | Reported-by: kernel test robot <oliver.sang@intel.com>
> | Link: https://lore.kernel.org/r/202210121406.d4ebc9bc-oliver.sang(a)intel.com
>
>
> [ 0.244585][ T0] BUG: kernel NULL pointer dereference, address: 0000000000000000
> [ 0.246464][ T0] #PF: supervisor read access in kernel mode
> [ 0.247823][ T0] #PF: error_code(0x0000) - not-present page
> [ 0.249179][ T0] PGD 0 P4D 0
> [ 0.249986][ T0] Oops: 0000 [#1] SMP PTI
> [ 0.251025][ T0] CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc3-00707-g0e949320dbee #4
> [ 0.252895][ T0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
> [ 0.255242][ T0] RIP: 0010:__stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:452)
> [ 0.256583][ T0] Code: 03 48 c7 c7 ec 17 b3 84 e8 91 e8 85 ff 44 89 e0 23 05 74 a8 01 03 48 8d 04 c3 48 89 c3 48 89 c7 48 89 44 24 28 e8 d4 f9 85 ff <4c> 8b 33 4d 85 f6 0f 84 b6 00 00 00 8b 04 24 83 e8 01 48 8d 04 c5
> All code
> ========
> 0: 03 48 c7 add -0x39(%rax),%ecx
> 3: c7 (bad)
> 4: ec in (%dx),%al
> 5: 17 (bad)
> 6: b3 84 mov $0x84,%bl
> 8: e8 91 e8 85 ff callq 0xffffffffff85e89e
> d: 44 89 e0 mov %r12d,%eax
> 10: 23 05 74 a8 01 03 and 0x301a874(%rip),%eax # 0x301a88a
> 16: 48 8d 04 c3 lea (%rbx,%rax,8),%rax
> 1a: 48 89 c3 mov %rax,%rbx
> 1d: 48 89 c7 mov %rax,%rdi
> 20: 48 89 44 24 28 mov %rax,0x28(%rsp)
> 25: e8 d4 f9 85 ff callq 0xffffffffff85f9fe
> 2a:* 4c 8b 33 mov (%rbx),%r14 <-- trapping instruction
> 2d: 4d 85 f6 test %r14,%r14
> 30: 0f 84 b6 00 00 00 je 0xec
> 36: 8b 04 24 mov (%rsp),%eax
> 39: 83 e8 01 sub $0x1,%eax
> 3c: 48 rex.W
> 3d: 8d .byte 0x8d
> 3e: 04 c5 add $0xc5,%al
>
> Code starting with the faulting instruction
> ===========================================
> 0: 4c 8b 33 mov (%rbx),%r14
> 3: 4d 85 f6 test %r14,%r14
> 6: 0f 84 b6 00 00 00 je 0xc2
> c: 8b 04 24 mov (%rsp),%eax
> f: 83 e8 01 sub $0x1,%eax
> 12: 48 rex.W
> 13: 8d .byte 0x8d
> 14: 04 c5 add $0xc5,%al
> [ 0.261023][ T0] RSP: 0000:ffffffff83603ca8 EFLAGS: 00010046
> [ 0.262337][ T0] RAX: ffffffff83613cd8 RBX: 0000000000000000 RCX: ffffffff81b16f8c
> [ 0.264139][ T0] RDX: 0000000000000b64 RSI: 0000000000000000 RDI: 0000000000000000
> [ 0.265948][ T0] RBP: 00000000c5a6b597 R08: ffffffff8479d118 R09: 0000000000000000
> [ 0.267668][ T0] R10: 0000000000000004 R11: 0001ffffffffffff R12: 0000000027b2cd0a
> [ 0.269492][ T0] R13: 0000000000000003 R14: 000000004954f68c R15: ffffffff83603d54
> [ 0.271315][ T0] FS: 0000000000000000(0000) GS:ffffffff842c9000(0000) knlGS:0000000000000000
> [ 0.273215][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.274736][ T0] CR2: 0000000000000000 CR3: 000000000360a000 CR4: 00000000000406b0
> [ 0.276558][ T0] Call Trace:
> [ 0.277339][ T0] <TASK>
> [ 0.278031][ T0] stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:534)
> [ 0.279163][ T0] set_track_prepare (kbuild/src/x86_64-2/mm/slub.c:752)
> [ 0.280296][ T0] ? memblock_alloc_range_nid (kbuild/src/x86_64-2/mm/memblock.c:1424)
> [ 0.281692][ T0] ? memblock_alloc_internal (kbuild/src/x86_64-2/mm/memblock.c:1514)
> [ 0.282985][ T0] ? memblock_alloc_try_nid (kbuild/src/x86_64-2/mm/memblock.c:1614 (discriminator 3))
> [ 0.286557][ T0] ? setup_command_line (kbuild/src/x86_64-2/init/main.c:631)
> [ 0.287706][ T0] ? start_kernel (kbuild/src/x86_64-2/init/main.c:965)
> [ 0.288803][ T0] ? secondary_startup_64_no_verify (kbuild/src/x86_64-2/arch/x86/kernel/head_64.S:358)
> [ 0.290257][ T0] ? __raw_callee_save___native_queued_spin_unlock (??:?)
> [ 0.291867][ T0] ? write_comp_data (kbuild/src/x86_64-2/kernel/kcov.c:236)
> [ 0.292883][ T0] ? strncpy (kbuild/src/x86_64-2/lib/string.c:115)
> [ 0.293763][ T0] __create_object (kbuild/src/x86_64-2/mm/kmemleak.c:681)
> [ 0.294761][ T0] kmemleak_alloc_phys (kbuild/src/x86_64-2/mm/kmemleak.c:1212)
> [ 0.295882][ T0] memblock_alloc_range_nid (kbuild/src/x86_64-2/mm/memblock.c:1424)
> [ 0.297105][ T0] memblock_alloc_internal (kbuild/src/x86_64-2/mm/memblock.c:1514)
> [ 0.298293][ T0] memblock_alloc_try_nid (kbuild/src/x86_64-2/mm/memblock.c:1614 (discriminator 3))
> [ 0.299516][ T0] setup_command_line (kbuild/src/x86_64-2/init/main.c:631)
> [ 0.300691][ T0] start_kernel (kbuild/src/x86_64-2/init/main.c:965)
> [ 0.301806][ T0] ? load_ucode_bsp (kbuild/src/x86_64-2/arch/x86/kernel/cpu/microcode/core.c:176)
> [ 0.302954][ T0] secondary_startup_64_no_verify (kbuild/src/x86_64-2/arch/x86/kernel/head_64.S:358)
> [ 0.304315][ T0] </TASK>
> [ 0.305039][ T0] Modules linked in:
> [ 0.305938][ T0] CR2: 0000000000000000
> [ 0.306882][ T0] ---[ end trace 0000000000000000 ]---
> [ 0.307913][ T0] RIP: 0010:__stack_depot_save (kbuild/src/x86_64-2/lib/stackdepot.c:452)
> [ 0.309033][ T0] Code: 03 48 c7 c7 ec 17 b3 84 e8 91 e8 85 ff 44 89 e0 23 05 74 a8 01 03 48 8d 04 c3 48 89 c3 48 89 c7 48 89 44 24 28 e8 d4 f9 85 ff <4c> 8b 33 4d 85 f6 0f 84 b6 00 00 00 8b 04 24 83 e8 01 48 8d 04 c5
> All code
> ========
> 0: 03 48 c7 add -0x39(%rax),%ecx
> 3: c7 (bad)
> 4: ec in (%dx),%al
> 5: 17 (bad)
> 6: b3 84 mov $0x84,%bl
> 8: e8 91 e8 85 ff callq 0xffffffffff85e89e
> d: 44 89 e0 mov %r12d,%eax
> 10: 23 05 74 a8 01 03 and 0x301a874(%rip),%eax # 0x301a88a
> 16: 48 8d 04 c3 lea (%rbx,%rax,8),%rax
> 1a: 48 89 c3 mov %rax,%rbx
> 1d: 48 89 c7 mov %rax,%rdi
> 20: 48 89 44 24 28 mov %rax,0x28(%rsp)
> 25: e8 d4 f9 85 ff callq 0xffffffffff85f9fe
> 2a:* 4c 8b 33 mov (%rbx),%r14 <-- trapping instruction
> 2d: 4d 85 f6 test %r14,%r14
> 30: 0f 84 b6 00 00 00 je 0xec
> 36: 8b 04 24 mov (%rsp),%eax
> 39: 83 e8 01 sub $0x1,%eax
> 3c: 48 rex.W
> 3d: 8d .byte 0x8d
> 3e: 04 c5 add $0xc5,%al
>
> Code starting with the faulting instruction
> ===========================================
> 0: 4c 8b 33 mov (%rbx),%r14
> 3: 4d 85 f6 test %r14,%r14
> 6: 0f 84 b6 00 00 00 je 0xc2
> c: 8b 04 24 mov (%rsp),%eax
> f: 83 e8 01 sub $0x1,%eax
> 12: 48 rex.W
> 13: 8d .byte 0x8d
> 14: 04 c5 add $0xc5,%al
>
>
> To reproduce:
>
> # build kernel
> cd linux
> cp config-6.0.0-rc3-00707-g0e949320dbee .config
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
>
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
>
>
next prev parent reply other threads:[~2022-10-12 7:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 1:16 [Resend PATCH] mm: use stack_depot for recording kmemleak's backtrace zhaoyang.huang
2022-10-11 1:32 ` Zhaoyang Huang
2022-10-12 6:33 ` [mm] 0e949320db: BUG:kernel_NULL_pointer_dereference,address kernel test robot
2022-10-12 6:33 ` kernel test robot
2022-10-12 7:36 ` Zhaoyang Huang [this message]
2022-10-12 7:36 ` [mm] 0e949320db: BUG:kernel_NULL_pointer_dereference, address Zhaoyang Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGWkznHr-dOdq0MG0DTz6XwEU8LpxURK-7jmHw2+7K0PMSOk3A@mail.gmail.com \
--to=huangzhaoyang@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=ke.wang@unisoc.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lkp@intel.com \
--cc=lkp@lists.01.org \
--cc=oliver.sang@intel.com \
--cc=steve.kang@unisoc.com \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
--cc=zhaoyang.huang@unisoc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.