From: Chen-Yu Tsai <wens@csie.org>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-sunxi <linux-sunxi@googlegroups.com>
Subject: Re: [linux-sunxi] [PATCH v2 0/9] Allwinner H6 USB support
Date: Mon, 9 Jul 2018 10:52:00 +0800 [thread overview]
Message-ID: <CAGb2v6613vcxaA0J5L_bm=ZCU_bkCkeK-icrq_y7Mmd1+MMrHQ@mail.gmail.com> (raw)
In-Reply-To: <20180706153805.25842-1-icenowy@aosc.io>
On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> This patchset introduces support for the USB ports (both USB2 and USB3)
> on the Allwinner H6 SoC.
>
> This revision adds the USB2 support, and places it before the USB3
> support. So only the USB3 part will have changelog in this revision.
>
> The first 5 PATCHes are the USB2 part, and the latter 4 PATCHes are the
> USB3 part.
>
> PATCH 1, 2, 6, 7 should go through the PHY tree, and the remaining
> patches should go through the armsoc tree via sunxi tree.
>
> Icenowy Zheng (9):
> phy: sun4i-usb: add support for missing USB PHY index
> phy: sun4i-usb: add support for H6 USB2 PHY
> arm64: allwinner: dts: h6: add USB2-related device nodes
> arm64: allwinner: dts: h6: add USB Vbus regulator
> arm64: allwinner: dts: h6: enable USB2 on Pine H64
> dt-bindings: phy: add binding for Allwinner USB3 PHY
> phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
> arm64: allwinner: dts: h6: add USB3 device nodes
> arm64: allwinner: dts: h6: enable USB3 port on Pine H64
Apart from my comments in a few patches, this series is
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
linux-kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
Subject: Re: [PATCH v2 0/9] Allwinner H6 USB support
Date: Mon, 9 Jul 2018 10:52:00 +0800 [thread overview]
Message-ID: <CAGb2v6613vcxaA0J5L_bm=ZCU_bkCkeK-icrq_y7Mmd1+MMrHQ@mail.gmail.com> (raw)
In-Reply-To: <20180706153805.25842-1-icenowy-h8G6r0blFSE@public.gmane.org>
On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org> wrote:
> This patchset introduces support for the USB ports (both USB2 and USB3)
> on the Allwinner H6 SoC.
>
> This revision adds the USB2 support, and places it before the USB3
> support. So only the USB3 part will have changelog in this revision.
>
> The first 5 PATCHes are the USB2 part, and the latter 4 PATCHes are the
> USB3 part.
>
> PATCH 1, 2, 6, 7 should go through the PHY tree, and the remaining
> patches should go through the armsoc tree via sunxi tree.
>
> Icenowy Zheng (9):
> phy: sun4i-usb: add support for missing USB PHY index
> phy: sun4i-usb: add support for H6 USB2 PHY
> arm64: allwinner: dts: h6: add USB2-related device nodes
> arm64: allwinner: dts: h6: add USB Vbus regulator
> arm64: allwinner: dts: h6: enable USB2 on Pine H64
> dt-bindings: phy: add binding for Allwinner USB3 PHY
> phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
> arm64: allwinner: dts: h6: add USB3 device nodes
> arm64: allwinner: dts: h6: enable USB3 port on Pine H64
Apart from my comments in a few patches, this series is
Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH v2 0/9] Allwinner H6 USB support
Date: Mon, 9 Jul 2018 10:52:00 +0800 [thread overview]
Message-ID: <CAGb2v6613vcxaA0J5L_bm=ZCU_bkCkeK-icrq_y7Mmd1+MMrHQ@mail.gmail.com> (raw)
In-Reply-To: <20180706153805.25842-1-icenowy@aosc.io>
On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> This patchset introduces support for the USB ports (both USB2 and USB3)
> on the Allwinner H6 SoC.
>
> This revision adds the USB2 support, and places it before the USB3
> support. So only the USB3 part will have changelog in this revision.
>
> The first 5 PATCHes are the USB2 part, and the latter 4 PATCHes are the
> USB3 part.
>
> PATCH 1, 2, 6, 7 should go through the PHY tree, and the remaining
> patches should go through the armsoc tree via sunxi tree.
>
> Icenowy Zheng (9):
> phy: sun4i-usb: add support for missing USB PHY index
> phy: sun4i-usb: add support for H6 USB2 PHY
> arm64: allwinner: dts: h6: add USB2-related device nodes
> arm64: allwinner: dts: h6: add USB Vbus regulator
> arm64: allwinner: dts: h6: enable USB2 on Pine H64
> dt-bindings: phy: add binding for Allwinner USB3 PHY
> phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
> arm64: allwinner: dts: h6: add USB3 device nodes
> arm64: allwinner: dts: h6: enable USB3 port on Pine H64
Apart from my comments in a few patches, this series is
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
next prev parent reply other threads:[~2018-07-09 2:52 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 15:37 [PATCH v2 0/9] Allwinner H6 USB support Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` [PATCH v2 1/9] phy: sun4i-usb: add support for missing USB PHY index Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` [PATCH v2 2/9] phy: sun4i-usb: add support for H6 USB2 PHY Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` [PATCH v2 3/9] arm64: allwinner: dts: h6: add USB2-related device nodes Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-06 15:37 ` Icenowy Zheng
2018-07-07 3:31 ` [linux-sunxi] " Chen-Yu Tsai
2018-07-07 3:31 ` Chen-Yu Tsai
2018-07-07 3:31 ` Chen-Yu Tsai
2018-07-07 3:33 ` [linux-sunxi] " Icenowy Zheng
2018-07-07 3:33 ` Icenowy Zheng
2018-07-07 3:33 ` Icenowy Zheng
2018-07-06 15:38 ` [PATCH v2 4/9] arm64: allwinner: dts: h6: add USB Vbus regulator Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` [PATCH v2 5/9] arm64: allwinner: dts: h6: enable USB2 on Pine H64 Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-07 3:38 ` [linux-sunxi] " Chen-Yu Tsai
2018-07-07 3:38 ` Chen-Yu Tsai
2018-07-07 3:38 ` Chen-Yu Tsai
2018-07-06 15:38 ` [PATCH v2 6/9] dt-bindings: phy: add binding for Allwinner USB3 PHY Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-11 16:13 ` Rob Herring
2018-07-11 16:13 ` Rob Herring
2018-07-11 16:13 ` Rob Herring
2018-07-11 16:19 ` Icenowy Zheng
2018-07-11 16:19 ` Icenowy Zheng
2018-07-11 16:19 ` Icenowy Zheng
2018-07-11 17:39 ` Rob Herring
2018-07-11 17:39 ` Rob Herring
2018-07-11 17:39 ` Rob Herring
2018-07-06 15:38 ` [PATCH v2 7/9] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-09 4:31 ` Kishon Vijay Abraham I
2018-07-09 4:31 ` Kishon Vijay Abraham I
2018-07-09 4:31 ` 'Kishon Vijay Abraham I' via linux-sunxi
2018-07-09 4:36 ` Chen-Yu Tsai
2018-07-09 4:36 ` Chen-Yu Tsai
2018-07-09 4:36 ` Chen-Yu Tsai
2018-07-09 4:40 ` [linux-sunxi] " Icenowy Zheng
2018-07-09 4:40 ` Icenowy Zheng
2018-07-09 4:40 ` Icenowy Zheng
2018-07-06 15:38 ` [PATCH v2 8/9] arm64: allwinner: dts: h6: add USB3 device nodes Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-07 3:35 ` [linux-sunxi] " Chen-Yu Tsai
2018-07-07 3:35 ` Chen-Yu Tsai
2018-07-07 3:35 ` Chen-Yu Tsai
2018-07-07 3:37 ` [linux-sunxi] " Icenowy Zheng
2018-07-07 3:37 ` Icenowy Zheng
2018-07-07 3:37 ` Icenowy Zheng
2018-07-06 15:38 ` [PATCH v2 9/9] arm64: allwinner: dts: h6: enable USB3 port on Pine H64 Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-06 15:38 ` Icenowy Zheng
2018-07-09 2:52 ` Chen-Yu Tsai [this message]
2018-07-09 2:52 ` [linux-sunxi] [PATCH v2 0/9] Allwinner H6 USB support Chen-Yu Tsai
2018-07-09 2:52 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGb2v6613vcxaA0J5L_bm=ZCU_bkCkeK-icrq_y7Mmd1+MMrHQ@mail.gmail.com' \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.