* [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
Hi,
This is an attempt at getting the main generic DT bindings for the ethernet
(and related) devices, and convert some DT bindings for the Allwinner DTs
to YAML as well.
This should provide some DT validation coverage.
Let me know if you have any questions,
Maxime
Changes from v3:
- Added a cover letter
- Dropped the phy-mode deprecation, and the DT changes moving to
phy-connection-type
- Fixed the mdio example node name
- Deprecated the fixed-link array property, in favor of the fixed-link
subnode
Changes from v2:
- Switched to the deprecated keyword to describe deprecated properties
- Deprecated phy-mode, phy and phy-handle
- Added patches to switch to phy-connection-type and phy-device for
Allwinner DTs
- Changed the A83t GMAC delays to use multipleOf instead of an enum
- Fix the snps,*pbl properties types
- Add a generic MDIO YAML schemas
Changes from v1:
- Move the DWMAC SoC specific bindings to separate documents
- Mark snps,reset-gpio (and related) as deprecated and fixed the
Allwinner DTs accordingly
- Restrict snps,tso to only a couple of compatibles
- Use an enum for the compatibles
- Add a custom select statement with the compatibles of all the generic
compatibles, including the deprecated ones. Remove the deprecated ones
from the valid compatible values to issue a warning when used.
- Add a patch to MAINTAINERS for the PHY YAML binding
- Add missing compatible options for the PHY, and missing phy speeds
- Add a custom select clause to make the PHY binding validate all phy
nodes, and not just the ones with a compatible
- Validate the fixed-link array elements
- Removed deprecated properties (phy-mode, phy, phy-device)
- Restrict the number of items under link-gpios to 1
Maxime Ripard (13):
dt-bindings: net: Add YAML schemas for the generic Ethernet options
dt-bindings: net: Add a YAML schemas for the generic PHY options
dt-bindings: net: Add a YAML schemas for the generic MDIO options
MAINTAINERS: Add Ethernet PHY YAML file
dt-bindings: net: phy: The interrupt property is not mandatory
dt-bindings: net: sun4i-emac: Convert the binding to a schemas
dt-bindings: net: sun4i-mdio: Convert the binding to a schemas
dt-bindings: net: stmmac: Convert the binding to a schemas
dt-bindings: net: sun7i-gmac: Convert the binding to a schemas
dt-bindings: net: sun8i-emac: Convert the binding to a schemas
dt-bindings: net: dwmac: Deprecate the PHY reset properties
ARM: dts: sunxi: Switch to the generic PHY properties
ARM: dts: sunxi: Switch from phy to phy-handle
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml | 55 ++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml | 70 ++++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt | 19 +---
Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt | 27 +-----
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt | 27 +-----
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml | 66 ++++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +-----------------------------------
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 204 ++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 178 +++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/ethernet.txt | 69 +------------
Documentation/devicetree/bindings/net/fixed-link.txt | 55 +----------
Documentation/devicetree/bindings/net/mdio.txt | 38 +-------
Documentation/devicetree/bindings/net/mdio.yaml | 51 +++++++++-
Documentation/devicetree/bindings/net/phy.txt | 80 +--------------
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 410 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/stmmac.txt | 179 +-------------------------------
MAINTAINERS | 1 +-
arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-colombus.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 8 +-
arch/arm/boot/dts/sun6i-a31-i7.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 8 +-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 11 +--
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 10 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
59 files changed, 1416 insertions(+), 746 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
create mode 100644 Documentation/devicetree/bindings/net/ethernet-controller.yaml
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
create mode 100644 Documentation/devicetree/bindings/net/snps,dwmac.yaml
base-commit: 8087b004bd099367c29d3a163950bc4b162ebc3c
--
git-series 0.9.1
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: devicetree, Florian Fainelli, Alexandre Torgue, Andrew Lunn,
Antoine Ténart, netdev, Maxime Chevallier, Maxime Coquelin,
linux-stm32, linux-arm-kernel, Heiner Kallweit
Hi,
This is an attempt at getting the main generic DT bindings for the ethernet
(and related) devices, and convert some DT bindings for the Allwinner DTs
to YAML as well.
This should provide some DT validation coverage.
Let me know if you have any questions,
Maxime
Changes from v3:
- Added a cover letter
- Dropped the phy-mode deprecation, and the DT changes moving to
phy-connection-type
- Fixed the mdio example node name
- Deprecated the fixed-link array property, in favor of the fixed-link
subnode
Changes from v2:
- Switched to the deprecated keyword to describe deprecated properties
- Deprecated phy-mode, phy and phy-handle
- Added patches to switch to phy-connection-type and phy-device for
Allwinner DTs
- Changed the A83t GMAC delays to use multipleOf instead of an enum
- Fix the snps,*pbl properties types
- Add a generic MDIO YAML schemas
Changes from v1:
- Move the DWMAC SoC specific bindings to separate documents
- Mark snps,reset-gpio (and related) as deprecated and fixed the
Allwinner DTs accordingly
- Restrict snps,tso to only a couple of compatibles
- Use an enum for the compatibles
- Add a custom select statement with the compatibles of all the generic
compatibles, including the deprecated ones. Remove the deprecated ones
from the valid compatible values to issue a warning when used.
- Add a patch to MAINTAINERS for the PHY YAML binding
- Add missing compatible options for the PHY, and missing phy speeds
- Add a custom select clause to make the PHY binding validate all phy
nodes, and not just the ones with a compatible
- Validate the fixed-link array elements
- Removed deprecated properties (phy-mode, phy, phy-device)
- Restrict the number of items under link-gpios to 1
Maxime Ripard (13):
dt-bindings: net: Add YAML schemas for the generic Ethernet options
dt-bindings: net: Add a YAML schemas for the generic PHY options
dt-bindings: net: Add a YAML schemas for the generic MDIO options
MAINTAINERS: Add Ethernet PHY YAML file
dt-bindings: net: phy: The interrupt property is not mandatory
dt-bindings: net: sun4i-emac: Convert the binding to a schemas
dt-bindings: net: sun4i-mdio: Convert the binding to a schemas
dt-bindings: net: stmmac: Convert the binding to a schemas
dt-bindings: net: sun7i-gmac: Convert the binding to a schemas
dt-bindings: net: sun8i-emac: Convert the binding to a schemas
dt-bindings: net: dwmac: Deprecate the PHY reset properties
ARM: dts: sunxi: Switch to the generic PHY properties
ARM: dts: sunxi: Switch from phy to phy-handle
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml | 55 ++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml | 70 ++++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt | 19 +---
Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt | 27 +-----
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt | 27 +-----
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml | 66 ++++++++++++-
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +-----------------------------------
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 204 ++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 178 +++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/ethernet.txt | 69 +------------
Documentation/devicetree/bindings/net/fixed-link.txt | 55 +----------
Documentation/devicetree/bindings/net/mdio.txt | 38 +-------
Documentation/devicetree/bindings/net/mdio.yaml | 51 +++++++++-
Documentation/devicetree/bindings/net/phy.txt | 80 +--------------
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 410 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/stmmac.txt | 179 +-------------------------------
MAINTAINERS | 1 +-
arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-colombus.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 8 +-
arch/arm/boot/dts/sun6i-a31-i7.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 8 +-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 11 +--
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 10 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
59 files changed, 1416 insertions(+), 746 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
create mode 100644 Documentation/devicetree/bindings/net/ethernet-controller.yaml
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
create mode 100644 Documentation/devicetree/bindings/net/snps,dwmac.yaml
base-commit: 8087b004bd099367c29d3a163950bc4b162ebc3c
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH v4 01/13] dt-bindings: net: Add YAML schemas for the generic Ethernet options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
The Ethernet controllers have a good number of generic options that can be
needed in a device tree. Add a YAML schemas for those.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 204 +++++++-
Documentation/devicetree/bindings/net/ethernet.txt | 69 +--
Documentation/devicetree/bindings/net/fixed-link.txt | 55 +--
3 files changed, 206 insertions(+), 122 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-controller.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
new file mode 100644
index 000000000000..77ee2aa5d29e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Controller Generic Binding
+
+maintainers:
+ - David S. Miller <davem@davemloft.net>
+
+properties:
+ $nodename:
+ pattern: "^ethernet(@.*)?$"
+
+ local-mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was assigned to the network device.
+
+ mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was last used by the boot
+ program; should be used in cases where the MAC address assigned
+ to the device by the boot program is different from the
+ local-mac-address property.
+
+ max-frame-size:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Maximum transfer unit (IEEE defined MTU), rather than the
+ maximum frame size (there\'s contradiction in the Devicetree
+ Specification).
+
+ max-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Specifies maximum speed in Mbit/s supported by the device.
+
+ nvmem-cells:
+ maxItems: 1
+ description:
+ Reference to an nvmem node for the MAC address
+
+ nvmem-cells-names:
+ const: mac-address
+
+ phy-connection-type:
+ description:
+ Operation mode of the PHY interface
+ enum:
+ # There is not a standard bus between the MAC and the PHY,
+ # something proprietary is being used to embed the PHY in the
+ # MAC.
+ - internal
+ - mii
+ - gmii
+ - sgmii
+ - qsgmii
+ - tbi
+ - rev-mii
+ - rmii
+
+ # RX and TX delays are added by the MAC when required
+ - rgmii
+
+ # RGMII with internal RX and TX delays provided by the PHY,
+ # the MAC should not add the RX or TX delays in this case
+ - rgmii-id
+
+ # RGMII with internal RX delay provided by the PHY, the MAC
+ # should not add an RX delay in this case
+ - rgmii-rxid
+
+ # RGMII with internal TX delay provided by the PHY, the MAC
+ # should not add an TX delay in this case
+ - rgmii-txid
+ - rtbi
+ - smii
+ - xgmii
+ - trgmii
+ - 1000base-x
+ - 2500base-x
+ - rxaui
+ - xaui
+
+ # 10GBASE-KR, XFI, SFI
+ - 10gbase-kr
+ - usxgmii
+
+ phy-mode:
+ $ref: "#/properties/phy-connection-type"
+
+ phy-handle:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference to a node representing a PHY device.
+
+ phy:
+ $ref: "#/properties/phy-handle"
+ deprecated: true
+
+ phy-device:
+ $ref: "#/properties/phy-handle"
+ deprecated: true
+
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s receive fifo in bytes. This is used
+ for components that can have configurable receive fifo sizes,
+ and is useful for determining certain configuration settings
+ such as flow control thresholds.
+
+ tx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s transmit fifo in bytes. This
+ is used for components that can have configurable fifo sizes.
+
+ managed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ - default: auto
+ enum:
+ - auto
+ - in-band-status
+ description:
+ Specifies the PHY management type. If auto is set and fixed-link
+ is not specified, it uses MDIO for management.
+
+ fixed-link:
+ allOf:
+ - if:
+ type: array
+ then:
+ deprecated: true
+ minItems: 1
+ maxItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
+
+
+ - if:
+ type: object
+ then:
+ properties:
+ speed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [10, 100, 1000]
+ description:
+ Link speed.
+
+ full-duplex:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that full-duplex is used. When absent, half
+ duplex is assumed.
+
+ asym-pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that asym_pause should be enabled.
+
+ link-gpios:
+ maxItems: 1
+ description:
+ GPIO to determine if the link is up
+
+ required:
+ - speed
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 5475682bf06e..5df413d01be2 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -1,68 +1 @@
-The following properties are common to the Ethernet controllers:
-
-NOTE: All 'phy*' properties documented below are Ethernet specific. For the
-generic PHY 'phys' property, see
-Documentation/devicetree/bindings/phy/phy-bindings.txt.
-
-- mac-address: array of 6 bytes, specifies the MAC address that was last used by
- the boot program; should be used in cases where the MAC address assigned to
- the device by the boot program is different from the "local-mac-address"
- property;
-- local-mac-address: array of 6 bytes, specifies the MAC address that was
- assigned to the network device;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
-- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
-- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
- the maximum frame size (there's contradiction in the Devicetree
- Specification).
-- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
- standard property; supported values are:
- * "internal" (Internal means there is not a standard bus between the MAC and
- the PHY, something proprietary is being used to embed the PHY in the MAC.)
- * "mii"
- * "gmii"
- * "sgmii"
- * "qsgmii"
- * "tbi"
- * "rev-mii"
- * "rmii"
- * "rgmii" (RX and TX delays are added by the MAC when required)
- * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
- MAC should not add the RX or TX delays in this case)
- * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
- should not add an RX delay in this case)
- * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
- should not add an TX delay in this case)
- * "rtbi"
- * "smii"
- * "xgmii"
- * "trgmii"
- * "1000base-x",
- * "2500base-x",
- * "rxaui"
- * "xaui"
- * "10gbase-kr" (10GBASE-KR, XFI, SFI)
- * "usxgmii"
-- phy-connection-type: the same as "phy-mode" property but described in the
- Devicetree Specification;
-- phy-handle: phandle, specifies a reference to a node representing a PHY
- device; this property is described in the Devicetree Specification and so
- preferred;
-- phy: the same as "phy-handle" property, not recommended for new bindings.
-- phy-device: the same as "phy-handle" property, not recommended for new
- bindings.
-- rx-fifo-depth: the size of the controller's receive fifo in bytes. This
- is used for components that can have configurable receive fifo sizes,
- and is useful for determining certain configuration settings such as
- flow control thresholds.
-- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
- is used for components that can have configurable fifo sizes.
-- managed: string, specifies the PHY management type. Supported values are:
- "auto", "in-band-status". "auto" is the default, it usess MDIO for
- management if fixed-link is not specified.
-
-Child nodes of the Ethernet controller are typically the individual PHY devices
-connected via the MDIO bus (sometimes the MDIO bus controller is separate).
-They are described in the phy.txt file in this same directory.
-For non-MDIO PHY management see fixed-link.txt.
+This file has moved to ethernet-controller.yaml.
diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt
index ec5d889fe3d8..5df413d01be2 100644
--- a/Documentation/devicetree/bindings/net/fixed-link.txt
+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
@@ -1,54 +1 @@
-Fixed link Device Tree binding
-------------------------------
-
-Some Ethernet MACs have a "fixed link", and are not connected to a
-normal MDIO-managed PHY device. For those situations, a Device Tree
-binding allows to describe a "fixed link".
-
-Such a fixed link situation is described by creating a 'fixed-link'
-sub-node of the Ethernet MAC device node, with the following
-properties:
-
-* 'speed' (integer, mandatory), to indicate the link speed. Accepted
- values are 10, 100 and 1000
-* 'full-duplex' (boolean, optional), to indicate that full duplex is
- used. When absent, half duplex is assumed.
-* 'pause' (boolean, optional), to indicate that pause should be
- enabled.
-* 'asym-pause' (boolean, optional), to indicate that asym_pause should
- be enabled.
-* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read
- to determine if the link is up.
-
-Old, deprecated 'fixed-link' binding:
-
-* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
- form <a b c d e> with the following accepted values:
- - a: emulated PHY ID, choose any but but unique to the all specified
- fixed-links, from 0 to 31
- - b: duplex configuration: 0 for half duplex, 1 for full duplex
- - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
- - d: pause configuration: 0 for no pause, 1 for pause
- - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
- asymmetric pause
-
-Examples:
-
-ethernet@0 {
- ...
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- ...
-};
-
-ethernet@1 {
- ...
- fixed-link {
- speed = <1000>;
- pause;
- link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- ...
-};
+This file has moved to ethernet-controller.yaml.
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 01/13] dt-bindings: net: Add YAML schemas for the generic Ethernet options
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
The Ethernet controllers have a good number of generic options that can be
needed in a device tree. Add a YAML schemas for those.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 204 +++++++-
Documentation/devicetree/bindings/net/ethernet.txt | 69 +--
Documentation/devicetree/bindings/net/fixed-link.txt | 55 +--
3 files changed, 206 insertions(+), 122 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-controller.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
new file mode 100644
index 000000000000..77ee2aa5d29e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Controller Generic Binding
+
+maintainers:
+ - David S. Miller <davem@davemloft.net>
+
+properties:
+ $nodename:
+ pattern: "^ethernet(@.*)?$"
+
+ local-mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was assigned to the network device.
+
+ mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was last used by the boot
+ program; should be used in cases where the MAC address assigned
+ to the device by the boot program is different from the
+ local-mac-address property.
+
+ max-frame-size:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Maximum transfer unit (IEEE defined MTU), rather than the
+ maximum frame size (there\'s contradiction in the Devicetree
+ Specification).
+
+ max-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Specifies maximum speed in Mbit/s supported by the device.
+
+ nvmem-cells:
+ maxItems: 1
+ description:
+ Reference to an nvmem node for the MAC address
+
+ nvmem-cells-names:
+ const: mac-address
+
+ phy-connection-type:
+ description:
+ Operation mode of the PHY interface
+ enum:
+ # There is not a standard bus between the MAC and the PHY,
+ # something proprietary is being used to embed the PHY in the
+ # MAC.
+ - internal
+ - mii
+ - gmii
+ - sgmii
+ - qsgmii
+ - tbi
+ - rev-mii
+ - rmii
+
+ # RX and TX delays are added by the MAC when required
+ - rgmii
+
+ # RGMII with internal RX and TX delays provided by the PHY,
+ # the MAC should not add the RX or TX delays in this case
+ - rgmii-id
+
+ # RGMII with internal RX delay provided by the PHY, the MAC
+ # should not add an RX delay in this case
+ - rgmii-rxid
+
+ # RGMII with internal TX delay provided by the PHY, the MAC
+ # should not add an TX delay in this case
+ - rgmii-txid
+ - rtbi
+ - smii
+ - xgmii
+ - trgmii
+ - 1000base-x
+ - 2500base-x
+ - rxaui
+ - xaui
+
+ # 10GBASE-KR, XFI, SFI
+ - 10gbase-kr
+ - usxgmii
+
+ phy-mode:
+ $ref: "#/properties/phy-connection-type"
+
+ phy-handle:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference to a node representing a PHY device.
+
+ phy:
+ $ref: "#/properties/phy-handle"
+ deprecated: true
+
+ phy-device:
+ $ref: "#/properties/phy-handle"
+ deprecated: true
+
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s receive fifo in bytes. This is used
+ for components that can have configurable receive fifo sizes,
+ and is useful for determining certain configuration settings
+ such as flow control thresholds.
+
+ tx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s transmit fifo in bytes. This
+ is used for components that can have configurable fifo sizes.
+
+ managed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ - default: auto
+ enum:
+ - auto
+ - in-band-status
+ description:
+ Specifies the PHY management type. If auto is set and fixed-link
+ is not specified, it uses MDIO for management.
+
+ fixed-link:
+ allOf:
+ - if:
+ type: array
+ then:
+ deprecated: true
+ minItems: 1
+ maxItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
+
+
+ - if:
+ type: object
+ then:
+ properties:
+ speed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [10, 100, 1000]
+ description:
+ Link speed.
+
+ full-duplex:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that full-duplex is used. When absent, half
+ duplex is assumed.
+
+ asym-pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that asym_pause should be enabled.
+
+ link-gpios:
+ maxItems: 1
+ description:
+ GPIO to determine if the link is up
+
+ required:
+ - speed
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 5475682bf06e..5df413d01be2 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -1,68 +1 @@
-The following properties are common to the Ethernet controllers:
-
-NOTE: All 'phy*' properties documented below are Ethernet specific. For the
-generic PHY 'phys' property, see
-Documentation/devicetree/bindings/phy/phy-bindings.txt.
-
-- mac-address: array of 6 bytes, specifies the MAC address that was last used by
- the boot program; should be used in cases where the MAC address assigned to
- the device by the boot program is different from the "local-mac-address"
- property;
-- local-mac-address: array of 6 bytes, specifies the MAC address that was
- assigned to the network device;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
-- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
-- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
- the maximum frame size (there's contradiction in the Devicetree
- Specification).
-- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
- standard property; supported values are:
- * "internal" (Internal means there is not a standard bus between the MAC and
- the PHY, something proprietary is being used to embed the PHY in the MAC.)
- * "mii"
- * "gmii"
- * "sgmii"
- * "qsgmii"
- * "tbi"
- * "rev-mii"
- * "rmii"
- * "rgmii" (RX and TX delays are added by the MAC when required)
- * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
- MAC should not add the RX or TX delays in this case)
- * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
- should not add an RX delay in this case)
- * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
- should not add an TX delay in this case)
- * "rtbi"
- * "smii"
- * "xgmii"
- * "trgmii"
- * "1000base-x",
- * "2500base-x",
- * "rxaui"
- * "xaui"
- * "10gbase-kr" (10GBASE-KR, XFI, SFI)
- * "usxgmii"
-- phy-connection-type: the same as "phy-mode" property but described in the
- Devicetree Specification;
-- phy-handle: phandle, specifies a reference to a node representing a PHY
- device; this property is described in the Devicetree Specification and so
- preferred;
-- phy: the same as "phy-handle" property, not recommended for new bindings.
-- phy-device: the same as "phy-handle" property, not recommended for new
- bindings.
-- rx-fifo-depth: the size of the controller's receive fifo in bytes. This
- is used for components that can have configurable receive fifo sizes,
- and is useful for determining certain configuration settings such as
- flow control thresholds.
-- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
- is used for components that can have configurable fifo sizes.
-- managed: string, specifies the PHY management type. Supported values are:
- "auto", "in-band-status". "auto" is the default, it usess MDIO for
- management if fixed-link is not specified.
-
-Child nodes of the Ethernet controller are typically the individual PHY devices
-connected via the MDIO bus (sometimes the MDIO bus controller is separate).
-They are described in the phy.txt file in this same directory.
-For non-MDIO PHY management see fixed-link.txt.
+This file has moved to ethernet-controller.yaml.
diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt
index ec5d889fe3d8..5df413d01be2 100644
--- a/Documentation/devicetree/bindings/net/fixed-link.txt
+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
@@ -1,54 +1 @@
-Fixed link Device Tree binding
-------------------------------
-
-Some Ethernet MACs have a "fixed link", and are not connected to a
-normal MDIO-managed PHY device. For those situations, a Device Tree
-binding allows to describe a "fixed link".
-
-Such a fixed link situation is described by creating a 'fixed-link'
-sub-node of the Ethernet MAC device node, with the following
-properties:
-
-* 'speed' (integer, mandatory), to indicate the link speed. Accepted
- values are 10, 100 and 1000
-* 'full-duplex' (boolean, optional), to indicate that full duplex is
- used. When absent, half duplex is assumed.
-* 'pause' (boolean, optional), to indicate that pause should be
- enabled.
-* 'asym-pause' (boolean, optional), to indicate that asym_pause should
- be enabled.
-* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read
- to determine if the link is up.
-
-Old, deprecated 'fixed-link' binding:
-
-* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
- form <a b c d e> with the following accepted values:
- - a: emulated PHY ID, choose any but but unique to the all specified
- fixed-links, from 0 to 31
- - b: duplex configuration: 0 for half duplex, 1 for full duplex
- - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
- - d: pause configuration: 0 for no pause, 1 for pause
- - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
- asymmetric pause
-
-Examples:
-
-ethernet@0 {
- ...
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- ...
-};
-
-ethernet@1 {
- ...
- fixed-link {
- speed = <1000>;
- pause;
- link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- ...
-};
+This file has moved to ethernet-controller.yaml.
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 02/13] dt-bindings: net: Add a YAML schemas for the generic PHY options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
The networking PHYs have a number of available device tree properties that
can be used in their device tree node. Add a YAML schemas for those.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 179 +++++++++-
Documentation/devicetree/bindings/net/phy.txt | 80 +----
2 files changed, 180 insertions(+), 79 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
new file mode 100644
index 000000000000..81d2016d7232
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Generic Binding
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+# The dt-schema tools will generate a select statement first by using
+# the compatible, and second by using the node name if any. In our
+# case, the node name is the one we want to match on, while the
+# compatible is optional.
+select:
+ properties:
+ $nodename:
+ pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+ required:
+ - $nodename
+
+properties:
+ $nodename:
+ pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+ compatible:
+ oneOf:
+ - const: ethernet-phy-ieee802.3-c22
+ description: PHYs that implement IEEE802.3 clause 22
+ - const: ethernet-phy-ieee802.3-c45
+ description: PHYs that implement IEEE802.3 clause 45
+ - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ description:
+ If the PHY reports an incorrect ID (or none at all) then the
+ compatible list may contain an entry with the correct PHY ID
+ in the above form.
+ The first group of digits is the 16 bit Phy Identifier 1
+ register, this is the chip vendor OUI bits 3:18. The
+ second group of digits is the Phy Identifier 2 register,
+ this is the chip vendor OUI bits 19:24, followed by 10
+ bits of a vendor specific ID.
+ - items:
+ - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - const: ethernet-phy-ieee802.3-c45
+
+ reg:
+ maxItems: 1
+ minimum: 0
+ maximum: 31
+ description:
+ The ID number for the PHY.
+
+ interrupts:
+ maxItems: 1
+
+ max-speed:
+ enum:
+ - 10
+ - 100
+ - 1000
+ - 2500
+ - 5000
+ - 10000
+ - 20000
+ - 25000
+ - 40000
+ - 50000
+ - 56000
+ - 100000
+ - 200000
+ description:
+ Maximum PHY supported speed in Mbits / seconds.
+
+ broken-turn-around:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates the PHY device does not correctly release
+ the turn around line low at the end of a MDIO transaction.
+
+ enet-phy-lane-swap:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates the PHY will swap the TX/RX lanes to
+ compensate for the board being designed with the lanes
+ swapped.
+
+ eee-broken-100tx:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-1000t:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gt:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-1000kx:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gkx4:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gkr:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ phy-is-integrated:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates that the PHY is integrated into the same
+ physical package as the Ethernet MAC. If needed, muxers
+ should be configured to ensure the integrated PHY is
+ used. The absence of this property indicates the muxers
+ should be configured so that the external PHY is used.
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ The GPIO phandle and specifier for the PHY reset signal.
+
+ reset-assert-us:
+ description:
+ Delay after the reset was asserted in microseconds. If this
+ property is missing the delay will be skipped.
+
+ reset-deassert-us:
+ description:
+ Delay after the reset was deasserted in microseconds. If
+ this property is missing the delay will be skipped.
+
+required:
+ - reg
+ - interrupts
+
+examples:
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&PIC>;
+ interrupts = <35 1>;
+ reg = <0>;
+
+ resets = <&rst 8>;
+ reset-names = "phy";
+ reset-gpios = <&gpio1 4 1>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <2000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 9b9e5b1765dd..2399ee60caed 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -1,79 +1 @@
-PHY nodes
-
-Required properties:
-
- - interrupts : interrupt specifier for the sole interrupt.
- - reg : The ID number for the phy, usually a small integer
-
-Optional Properties:
-
-- compatible: Compatible list, may contain
- "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
- PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
- specifications. If neither of these are specified, the default is to
- assume clause 22.
-
- If the PHY reports an incorrect ID (or none at all) then the
- "compatible" list may contain an entry with the correct PHY ID in the
- form: "ethernet-phy-idAAAA.BBBB" where
- AAAA - The value of the 16 bit Phy Identifier 1 register as
- 4 hex digits. This is the chip vendor OUI bits 3:18
- BBBB - The value of the 16 bit Phy Identifier 2 register as
- 4 hex digits. This is the chip vendor OUI bits 19:24,
- followed by 10 bits of a vendor specific ID.
-
- The compatible list should not contain other values than those
- listed here.
-
-- max-speed: Maximum PHY supported speed (10, 100, 1000...)
-
-- broken-turn-around: If set, indicates the PHY device does not correctly
- release the turn around line low at the end of a MDIO transaction.
-
-- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to
- compensate for the board being designed with the lanes swapped.
-
-- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the
- TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong
- bootstrap configuration caused by issues in PCB layout design.
-
-- eee-broken-100tx:
-- eee-broken-1000t:
-- eee-broken-10gt:
-- eee-broken-1000kx:
-- eee-broken-10gkx4:
-- eee-broken-10gkr:
- Mark the corresponding energy efficient ethernet mode as broken and
- request the ethernet to stop advertising it.
-
-- phy-is-integrated: If set, indicates that the PHY is integrated into the same
- physical package as the Ethernet MAC. If needed, muxers should be configured
- to ensure the integrated PHY is used. The absence of this property indicates
- the muxers should be configured so that the external PHY is used.
-
-- resets: The reset-controller phandle and specifier for the PHY reset signal.
-
-- reset-names: Must be "phy" for the PHY reset signal.
-
-- reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
-
-- reset-assert-us: Delay after the reset was asserted in microseconds.
- If this property is missing the delay will be skipped.
-
-- reset-deassert-us: Delay after the reset was deasserted in microseconds.
- If this property is missing the delay will be skipped.
-
-Example:
-
-ethernet-phy@0 {
- compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
- interrupt-parent = <&PIC>;
- interrupts = <35 IRQ_TYPE_EDGE_RISING>;
- reg = <0>;
-
- resets = <&rst 8>;
- reset-names = "phy";
- reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- reset-assert-us = <1000>;
- reset-deassert-us = <2000>;
-};
+This file has moved to ethernet-phy.yaml.
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 02/13] dt-bindings: net: Add a YAML schemas for the generic PHY options
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
The networking PHYs have a number of available device tree properties that
can be used in their device tree node. Add a YAML schemas for those.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 179 +++++++++-
Documentation/devicetree/bindings/net/phy.txt | 80 +----
2 files changed, 180 insertions(+), 79 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
new file mode 100644
index 000000000000..81d2016d7232
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Generic Binding
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+# The dt-schema tools will generate a select statement first by using
+# the compatible, and second by using the node name if any. In our
+# case, the node name is the one we want to match on, while the
+# compatible is optional.
+select:
+ properties:
+ $nodename:
+ pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+ required:
+ - $nodename
+
+properties:
+ $nodename:
+ pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+ compatible:
+ oneOf:
+ - const: ethernet-phy-ieee802.3-c22
+ description: PHYs that implement IEEE802.3 clause 22
+ - const: ethernet-phy-ieee802.3-c45
+ description: PHYs that implement IEEE802.3 clause 45
+ - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ description:
+ If the PHY reports an incorrect ID (or none at all) then the
+ compatible list may contain an entry with the correct PHY ID
+ in the above form.
+ The first group of digits is the 16 bit Phy Identifier 1
+ register, this is the chip vendor OUI bits 3:18. The
+ second group of digits is the Phy Identifier 2 register,
+ this is the chip vendor OUI bits 19:24, followed by 10
+ bits of a vendor specific ID.
+ - items:
+ - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - const: ethernet-phy-ieee802.3-c45
+
+ reg:
+ maxItems: 1
+ minimum: 0
+ maximum: 31
+ description:
+ The ID number for the PHY.
+
+ interrupts:
+ maxItems: 1
+
+ max-speed:
+ enum:
+ - 10
+ - 100
+ - 1000
+ - 2500
+ - 5000
+ - 10000
+ - 20000
+ - 25000
+ - 40000
+ - 50000
+ - 56000
+ - 100000
+ - 200000
+ description:
+ Maximum PHY supported speed in Mbits / seconds.
+
+ broken-turn-around:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates the PHY device does not correctly release
+ the turn around line low at the end of a MDIO transaction.
+
+ enet-phy-lane-swap:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates the PHY will swap the TX/RX lanes to
+ compensate for the board being designed with the lanes
+ swapped.
+
+ eee-broken-100tx:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-1000t:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gt:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-1000kx:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gkx4:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ eee-broken-10gkr:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Mark the corresponding energy efficient ethernet mode as
+ broken and request the ethernet to stop advertising it.
+
+ phy-is-integrated:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, indicates that the PHY is integrated into the same
+ physical package as the Ethernet MAC. If needed, muxers
+ should be configured to ensure the integrated PHY is
+ used. The absence of this property indicates the muxers
+ should be configured so that the external PHY is used.
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ The GPIO phandle and specifier for the PHY reset signal.
+
+ reset-assert-us:
+ description:
+ Delay after the reset was asserted in microseconds. If this
+ property is missing the delay will be skipped.
+
+ reset-deassert-us:
+ description:
+ Delay after the reset was deasserted in microseconds. If
+ this property is missing the delay will be skipped.
+
+required:
+ - reg
+ - interrupts
+
+examples:
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&PIC>;
+ interrupts = <35 1>;
+ reg = <0>;
+
+ resets = <&rst 8>;
+ reset-names = "phy";
+ reset-gpios = <&gpio1 4 1>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <2000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 9b9e5b1765dd..2399ee60caed 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -1,79 +1 @@
-PHY nodes
-
-Required properties:
-
- - interrupts : interrupt specifier for the sole interrupt.
- - reg : The ID number for the phy, usually a small integer
-
-Optional Properties:
-
-- compatible: Compatible list, may contain
- "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
- PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
- specifications. If neither of these are specified, the default is to
- assume clause 22.
-
- If the PHY reports an incorrect ID (or none at all) then the
- "compatible" list may contain an entry with the correct PHY ID in the
- form: "ethernet-phy-idAAAA.BBBB" where
- AAAA - The value of the 16 bit Phy Identifier 1 register as
- 4 hex digits. This is the chip vendor OUI bits 3:18
- BBBB - The value of the 16 bit Phy Identifier 2 register as
- 4 hex digits. This is the chip vendor OUI bits 19:24,
- followed by 10 bits of a vendor specific ID.
-
- The compatible list should not contain other values than those
- listed here.
-
-- max-speed: Maximum PHY supported speed (10, 100, 1000...)
-
-- broken-turn-around: If set, indicates the PHY device does not correctly
- release the turn around line low at the end of a MDIO transaction.
-
-- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to
- compensate for the board being designed with the lanes swapped.
-
-- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the
- TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong
- bootstrap configuration caused by issues in PCB layout design.
-
-- eee-broken-100tx:
-- eee-broken-1000t:
-- eee-broken-10gt:
-- eee-broken-1000kx:
-- eee-broken-10gkx4:
-- eee-broken-10gkr:
- Mark the corresponding energy efficient ethernet mode as broken and
- request the ethernet to stop advertising it.
-
-- phy-is-integrated: If set, indicates that the PHY is integrated into the same
- physical package as the Ethernet MAC. If needed, muxers should be configured
- to ensure the integrated PHY is used. The absence of this property indicates
- the muxers should be configured so that the external PHY is used.
-
-- resets: The reset-controller phandle and specifier for the PHY reset signal.
-
-- reset-names: Must be "phy" for the PHY reset signal.
-
-- reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
-
-- reset-assert-us: Delay after the reset was asserted in microseconds.
- If this property is missing the delay will be skipped.
-
-- reset-deassert-us: Delay after the reset was deasserted in microseconds.
- If this property is missing the delay will be skipped.
-
-Example:
-
-ethernet-phy@0 {
- compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
- interrupt-parent = <&PIC>;
- interrupts = <35 IRQ_TYPE_EDGE_RISING>;
- reg = <0>;
-
- resets = <&rst 8>;
- reset-names = "phy";
- reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- reset-assert-us = <1000>;
- reset-deassert-us = <2000>;
-};
+This file has moved to ethernet-phy.yaml.
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
The MDIO buses have a number of available device tree properties that can
be used in their device tree node. Add a YAML schemas for those.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
2 files changed, 52 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
index e3e1603f256c..cf8a0105488e 100644
--- a/Documentation/devicetree/bindings/net/mdio.txt
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -1,37 +1 @@
-Common MDIO bus properties.
-
-These are generic properties that can apply to any MDIO bus.
-
-Optional properties:
-- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO
- bus.
-- reset-delay-us: RESET pulse width in microseconds.
-
-A list of child nodes, one per device on the bus is expected. These
-should follow the generic phy.txt, or a device specific binding document.
-
-The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and
-applies to all PHY devices. It must therefore be appropriately determined based
-on all PHY requirements (maximum value of all per-PHY RESET pulse widths).
-
-Example :
-This example shows these optional properties, plus other properties
-required for the TI Davinci MDIO driver.
-
- davinci_mdio: ethernet@5c030000 {
- compatible = "ti,davinci_mdio";
- reg = <0x5c030000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2>;
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy1: ethernet-phy@3 {
- reg = <3>;
- };
- };
+This file has moved to mdio.yaml.
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
new file mode 100644
index 000000000000..b8fa8251c4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO Bus Generic Binding
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+ These are generic properties that can apply to any MDIO bus. Any
+ MDIO bus must have a list of child nodes, one per device on the
+ bus. These should follow the generic ethernet-phy.yaml document, or
+ a device specific binding document.
+
+properties:
+ reset-gpios:
+ maxItems: 1
+ description:
+ The phandle and specifier for the GPIO that controls the RESET
+ lines of all PHYs on that MDIO bus.
+
+ reset-delay-us:
+ description:
+ RESET pulse width in microseconds. It applies to all PHY devices
+ and must therefore be appropriately determined based on all PHY
+ requirements (maximum value of all per-PHY RESET pulse widths).
+
+examples:
+ - |
+ davinci_mdio: mdio@5c030000 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x5c030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio2 5 1>;
+ reset-delay-us = <2>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: devicetree, Florian Fainelli, Alexandre Torgue, Andrew Lunn,
Antoine Ténart, netdev, Maxime Chevallier, Maxime Coquelin,
linux-stm32, linux-arm-kernel, Heiner Kallweit
The MDIO buses have a number of available device tree properties that can
be used in their device tree node. Add a YAML schemas for those.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
2 files changed, 52 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
index e3e1603f256c..cf8a0105488e 100644
--- a/Documentation/devicetree/bindings/net/mdio.txt
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -1,37 +1 @@
-Common MDIO bus properties.
-
-These are generic properties that can apply to any MDIO bus.
-
-Optional properties:
-- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO
- bus.
-- reset-delay-us: RESET pulse width in microseconds.
-
-A list of child nodes, one per device on the bus is expected. These
-should follow the generic phy.txt, or a device specific binding document.
-
-The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and
-applies to all PHY devices. It must therefore be appropriately determined based
-on all PHY requirements (maximum value of all per-PHY RESET pulse widths).
-
-Example :
-This example shows these optional properties, plus other properties
-required for the TI Davinci MDIO driver.
-
- davinci_mdio: ethernet@5c030000 {
- compatible = "ti,davinci_mdio";
- reg = <0x5c030000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2>;
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy1: ethernet-phy@3 {
- reg = <3>;
- };
- };
+This file has moved to mdio.yaml.
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
new file mode 100644
index 000000000000..b8fa8251c4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO Bus Generic Binding
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+ These are generic properties that can apply to any MDIO bus. Any
+ MDIO bus must have a list of child nodes, one per device on the
+ bus. These should follow the generic ethernet-phy.yaml document, or
+ a device specific binding document.
+
+properties:
+ reset-gpios:
+ maxItems: 1
+ description:
+ The phandle and specifier for the GPIO that controls the RESET
+ lines of all PHYs on that MDIO bus.
+
+ reset-delay-us:
+ description:
+ RESET pulse width in microseconds. It applies to all PHY devices
+ and must therefore be appropriately determined based on all PHY
+ requirements (maximum value of all per-PHY RESET pulse widths).
+
+examples:
+ - |
+ davinci_mdio: mdio@5c030000 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x5c030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio2 5 1>;
+ reset-delay-us = <2>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 04/13] MAINTAINERS: Add Ethernet PHY YAML file
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
While the Ethernet PHY framework was marked as maintained, the device tree
bindings associated to that framework was not listed under the maintained
files. Fix that.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e3b9738f2e6..087821e507f6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6009,6 +6009,7 @@ M: Heiner Kallweit <hkallweit1@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-mdio
+F: Documentation/devicetree/bindings/net/ethernet-phy.yaml
F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/networking/phy.rst
F: drivers/net/phy/
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 04/13] MAINTAINERS: Add Ethernet PHY YAML file
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: devicetree, Florian Fainelli, Alexandre Torgue, Andrew Lunn,
Antoine Ténart, netdev, Maxime Chevallier, Maxime Coquelin,
linux-stm32, linux-arm-kernel, Heiner Kallweit
While the Ethernet PHY framework was marked as maintained, the device tree
bindings associated to that framework was not listed under the maintained
files. Fix that.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e3b9738f2e6..087821e507f6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6009,6 +6009,7 @@ M: Heiner Kallweit <hkallweit1@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-mdio
+F: Documentation/devicetree/bindings/net/ethernet-phy.yaml
F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/networking/phy.rst
F: drivers/net/phy/
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 05/13] dt-bindings: net: phy: The interrupt property is not mandatory
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Unlike what was initially claimed in the PHY binding, the interrupt
property of a PHY can be omitted, and the OS will turn to polling instead.
Document that.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 81d2016d7232..c77f97cbd54b 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -156,7 +156,6 @@ properties:
required:
- reg
- - interrupts
examples:
- |
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 05/13] dt-bindings: net: phy: The interrupt property is not mandatory
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Unlike what was initially claimed in the PHY binding, the interrupt
property of a PHY can be omitted, and the OS will turn to polling instead.
Document that.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 81d2016d7232..c77f97cbd54b 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -156,7 +156,6 @@ properties:
required:
- reg
- - interrupts
examples:
- |
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 06/13] dt-bindings: net: sun4i-emac: Convert the binding to a schemas
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Switch our Allwinner A10 EMAC controller binding to a YAML schema to enable
the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt | 19 -------------------
2 files changed, 55 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
new file mode 100644
index 000000000000..2ff9e605cd26
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ const: allwinner,sun4i-a10-emac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ allwinner,sram:
+ description: Phandle to the device SRAM
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - phy-handle
+ - allwinner,sram
+
+examples:
+ - |
+ emac: ethernet@1c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <55>;
+ clocks = <&ahb_gates 17>;
+ phy = <&phy0>;
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
deleted file mode 100644
index e98118aef5f6..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Allwinner EMAC ethernet controller
-
-Required properties:
-- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
- "allwinner,sun4i-emac")
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-- phy: see ethernet.txt file in the same directory.
-- clocks: A phandle to the reference clock for this device
-
-Example:
-
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
- interrupts = <55>;
- clocks = <&ahb_gates 17>;
- phy = <&phy0>;
-};
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 06/13] dt-bindings: net: sun4i-emac: Convert the binding to a schemas
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Switch our Allwinner A10 EMAC controller binding to a YAML schema to enable
the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt | 19 -------------------
2 files changed, 55 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
new file mode 100644
index 000000000000..2ff9e605cd26
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ const: allwinner,sun4i-a10-emac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ allwinner,sram:
+ description: Phandle to the device SRAM
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - phy-handle
+ - allwinner,sram
+
+examples:
+ - |
+ emac: ethernet@1c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <55>;
+ clocks = <&ahb_gates 17>;
+ phy = <&phy0>;
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
deleted file mode 100644
index e98118aef5f6..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Allwinner EMAC ethernet controller
-
-Required properties:
-- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
- "allwinner,sun4i-emac")
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-- phy: see ethernet.txt file in the same directory.
-- clocks: A phandle to the reference clock for this device
-
-Example:
-
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
- interrupts = <55>;
- clocks = <&ahb_gates 17>;
- phy = <&phy0>;
-};
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 07/13] dt-bindings: net: sun4i-mdio: Convert the binding to a schemas
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Switch our Allwinner A10 MDIO controller binding to a YAML schema to enable
the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt | 27 ---------------------------
2 files changed, 70 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
new file mode 100644
index 000000000000..df24d9d969f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MDIO Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+ - $ref: "mdio.yaml#"
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-mdio
+
+ # Deprecated
+ - allwinner,sun4i-mdio
+
+ required:
+ - compatible
+
+properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-mdio
+
+ reg:
+ maxItems: 1
+
+ phy-supply:
+ description: PHY regulator
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ mdio@1c0b080 {
+ compatible = "allwinner,sun4i-a10-mdio";
+ reg = <0x01c0b080 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-supply = <®_emac_3v3>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
deleted file mode 100644
index ab5b8613b0ef..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Allwinner A10 MDIO Ethernet Controller interface
-
-Required properties:
-- compatible: should be "allwinner,sun4i-a10-mdio"
- (Deprecated: "allwinner,sun4i-mdio").
-- reg: address and length of the register set for the device.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Example at the SoC level:
-mdio@1c0b080 {
- compatible = "allwinner,sun4i-a10-mdio";
- reg = <0x01c0b080 0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
-
-And at the board level:
-
-mdio@1c0b080 {
- phy-supply = <®_emac_3v3>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 07/13] dt-bindings: net: sun4i-mdio: Convert the binding to a schemas
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Switch our Allwinner A10 MDIO controller binding to a YAML schema to enable
the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt | 27 ---------------------------
2 files changed, 70 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
new file mode 100644
index 000000000000..df24d9d969f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MDIO Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+ - $ref: "mdio.yaml#"
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-mdio
+
+ # Deprecated
+ - allwinner,sun4i-mdio
+
+ required:
+ - compatible
+
+properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-mdio
+
+ reg:
+ maxItems: 1
+
+ phy-supply:
+ description: PHY regulator
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ mdio@1c0b080 {
+ compatible = "allwinner,sun4i-a10-mdio";
+ reg = <0x01c0b080 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-supply = <®_emac_3v3>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
deleted file mode 100644
index ab5b8613b0ef..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Allwinner A10 MDIO Ethernet Controller interface
-
-Required properties:
-- compatible: should be "allwinner,sun4i-a10-mdio"
- (Deprecated: "allwinner,sun4i-mdio").
-- reg: address and length of the register set for the device.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Example at the SoC level:
-mdio@1c0b080 {
- compatible = "allwinner,sun4i-a10-mdio";
- reg = <0x01c0b080 0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
-
-And at the board level:
-
-mdio@1c0b080 {
- phy-supply = <®_emac_3v3>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 08/13] dt-bindings: net: stmmac: Convert the binding to a schemas
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML
schema to enable the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 389 +++++++++++-
Documentation/devicetree/bindings/net/stmmac.txt | 179 +-----
2 files changed, 390 insertions(+), 178 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/snps,dwmac.yaml
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
new file mode 100644
index 000000000000..30e2ff7a2dcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MAC Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+ - Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ - Jose Abreu <joabreu@synopsys.com>
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ # Deprecated
+ - st,spear600-gmac
+
+ required:
+ - compatible
+
+properties:
+
+ # We need to include all the compatibles from schemas that will
+ # include that schemas, otherwise compatible won't validate for
+ # those.
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: Combined signal for various interrupt events
+ - description: The interrupt to manage the remote wake-up packet detection
+ - description: The interrupt that occurs when Rx exits the LPI state
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ - const: macirq
+ - const: eth_wake_irq
+ - const: eth_lpi
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: GMAC main clock
+ - description: Peripheral registers interface clock
+ - description:
+ PTP reference clock. This clock is used for programming the
+ Timestamp Addend Register. If not passed then the system
+ clock will be used and this is fine on some platforms.
+
+ clock-names:
+ additionalItems: true
+ contains:
+ enum:
+ - stmmaceth
+ - pclk
+ - ptp_ref
+
+ resets:
+ maxItems: 1
+ description:
+ MAC Reset signal.
+
+ reset-names:
+ const: stmmaceth
+
+ snps,axi-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ AXI BUS Mode parameters. Phandle to a node that can contain the
+ following properties
+ * snps,lpi_en, enable Low Power Interface
+ * snps,xit_frm, unlock on WoL
+ * snps,wr_osr_lmt, max write outstanding req. limit
+ * snps,rd_osr_lmt, max read outstanding req. limit
+ * snps,kbbe, do not cross 1KiB boundary.
+ * snps,blen, this is a vector of supported burst length.
+ * snps,fb, fixed-burst
+ * snps,mb, mixed-burst
+ * snps,rb, rebuild INCRx Burst
+
+ snps,mtl-rx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple RX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,rx-queues-to-use, number of RX queues to be used in the
+ driver
+ * Choose one of these RX scheduling algorithms
+ * snps,rx-sched-sp, Strict priority
+ * snps,rx-sched-wsp, Weighted Strict priority
+ * For each RX queue
+ * Choose one of these modes
+ * snps,dcb-algorithm, Queue to be enabled as DCB
+ * snps,avb-algorithm, Queue to be enabled as AVB
+ * snps,map-to-dma-channel, Channel to map
+ * Specifiy specific packet routing
+ * snps,route-avcp, AV Untagged Control packets
+ * snps,route-ptp, PTP Packets
+ * snps,route-dcbcp, DCB Control Packets
+ * snps,route-up, Untagged Packets
+ * snps,route-multi-broad, Multicast & Broadcast Packets
+ * snps,priority, RX queue priority (Range 0x0 to 0xF)
+
+ snps,mtl-tx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple TX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,tx-queues-to-use, number of TX queues to be used in the
+ driver
+ * Choose one of these TX scheduling algorithms
+ * snps,tx-sched-wrr, Weighted Round Robin
+ * snps,tx-sched-wfq, Weighted Fair Queuing
+ * snps,tx-sched-dwrr, Deficit Weighted Round Robin
+ * snps,tx-sched-sp, Strict priority
+ * For each TX queue
+ * snps,weight, TX queue weight (if using a DCB weight
+ algorithm)
+ * Choose one of these modes
+ * snps,dcb-algorithm, TX queue will be working in DCB
+ * snps,avb-algorithm, TX queue will be working in AVB
+ [Attention] Queue 0 is reserved for legacy traffic
+ and so no AVB is available in this queue.
+ * Configure Credit Base Shaper (if AVB Mode selected)
+ * snps,send_slope, enable Low Power Interface
+ * snps,idle_slope, unlock on WoL
+ * snps,high_credit, max write outstanding req. limit
+ * snps,low_credit, max read outstanding req. limit
+ * snps,priority, TX queue priority (Range 0x0 to 0xF)
+
+ snps,reset-gpio:
+ maxItems: 1
+ description:
+ PHY Reset GPIO
+
+ snps,reset-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that the PHY Reset is active low
+
+ snps,reset-delays-us:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - minItems: 3
+ maxItems: 3
+ description:
+ Triplet of delays. The 1st cell is reset pre-delay in micro
+ seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
+ cell is reset post-delay in micro seconds.
+
+ snps,aal:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Use Address-Aligned Beats
+
+ snps,fixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the fixed burst mode
+
+ snps,mixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the mixed burst mode
+
+ snps,force_thresh_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the threshold mode for both tx and rx
+
+ snps,force_sf_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the Store and Forward mode for both tx and
+ rx. This flag is ignored if force_thresh_dma_mode is set.
+
+ snps,en-tx-lpi-clockgating:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enable gating of the MAC TX clock during TX low-power mode
+
+ snps,multicast-filter-bins:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of multicast filter hash bins supported by this device
+ instance
+
+ snps,perfect-filter-entries:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of perfect filter entries supported by this device
+ instance
+
+ snps,ps-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Port selection speed that can be passed to the core when PCS
+ is supported. For example, this is used in case of SGMII and
+ MAC2MAC connection.
+
+ mdio:
+ type: object
+ description:
+ Creates and registers an MDIO bus.
+
+ properties:
+ compatible:
+ const: snps,dwmac-mdio
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - phy-connection-type
+
+dependencies:
+ snps,reset-active-low: ["snps,reset-gpio"]
+ snps,reset-delay-us: ["snps,reset-gpio"]
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ properties:
+ snps,pbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Programmable Burst Length (tx and rx)
+
+ snps,txpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Tx Programmable Burst Length. If set, DMA tx will use this
+ value rather than snps,pbl.
+
+ snps,rxpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Rx Programmable Burst Length. If set, DMA rx will use this
+ value rather than snps,pbl.
+
+ snps,no-pbl-x8:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
+ rev < 3.50, don\'t multiply the values by 4.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ snps,tso:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enables the TSO feature otherwise it will be managed by
+ MAC HW capability register.
+
+examples:
+ - |
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+
+ queue1 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ };
+
+ gmac0: ethernet@e0800000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
+ phy-connection-type = "gmii";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <16384>;
+ tx-fifo-depth = <16384>;
+ clocks = <&clock>;
+ clock-names = "stmmaceth";
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@0 {
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index cb694062afff..7d48782767cb 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -1,178 +1 @@
-* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC)
-
-Required properties:
-- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or
- "snps,dwxgmac-<ip_version>", "snps,dwxgmac".
- For backwards compatibility: "st,spear600-gmac" is also supported.
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the STMMAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Valid interrupt names are:
- - "macirq" (combined signal for various interrupt events)
- - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
- - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state)
-- phy-mode: See ethernet.txt file in the same directory.
-- snps,reset-gpio gpio number for phy reset.
-- snps,reset-active-low boolean flag to indicate if phy reset is active low.
-- snps,reset-delays-us is triplet of delays
- The 1st cell is reset pre-delay in micro seconds.
- The 2nd cell is reset pulse in micro seconds.
- The 3rd cell is reset post-delay in micro seconds.
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
- reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock and
- the second clock should be peripheral's register interface clock. Further
- clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
-- ptp_ref: this is the PTP reference clock; in case of the PTP is available
- this clock is used for programming the Timestamp Addend Register. If not
- passed then the system clock will be used and this is fine on some
- platforms.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
-- snps,pbl Programmable Burst Length (tx and rx)
-- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA tx will use this value rather than snps,pbl.
-- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA rx will use this value rather than snps,pbl.
-- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8.
- For core rev < 3.50, don't multiply the values by 4.
-- snps,aal Address-Aligned Beats
-- snps,fixed-burst Program the DMA to use the fixed burst mode
-- snps,mixed-burst Program the DMA to use the mixed burst mode
-- snps,force_thresh_dma_mode Force DMA to use the threshold mode for
- both tx and rx
-- snps,force_sf_dma_mode Force DMA to use the Store and Forward
- mode for both tx and rx. This flag is
- ignored if force_thresh_dma_mode is set.
-- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during
- TX low-power mode
-- snps,multicast-filter-bins: Number of multicast filter hash bins
- supported by this device instance
-- snps,perfect-filter-entries: Number of perfect filter entries supported
- by this device instance
-- snps,ps-speed: port selection speed that can be passed to the core when
- PCS is supported. For example, this is used in case of SGMII
- and MAC2MAC connection.
-- snps,tso: this enables the TSO feature otherwise it will be managed by
- MAC HW capability register. Only for GMAC4 and newer.
-- AXI BUS Mode parameters: below the list of all the parameters to program the
- AXI register inside the DMA module:
- - snps,lpi_en: enable Low Power Interface
- - snps,xit_frm: unlock on WoL
- - snps,wr_osr_lmt: max write outstanding req. limit
- - snps,rd_osr_lmt: max read outstanding req. limit
- - snps,kbbe: do not cross 1KiB boundary.
- - snps,blen: this is a vector of supported burst length.
- - snps,fb: fixed-burst
- - snps,mb: mixed-burst
- - snps,rb: rebuild INCRx Burst
-- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
-- Multiple RX Queues parameters: below the list of all the parameters to
- configure the multiple RX queues:
- - snps,rx-queues-to-use: number of RX queues to be used in the driver
- - Choose one of these RX scheduling algorithms:
- - snps,rx-sched-sp: Strict priority
- - snps,rx-sched-wsp: Weighted Strict priority
- - For each RX queue
- - Choose one of these modes:
- - snps,dcb-algorithm: Queue to be enabled as DCB
- - snps,avb-algorithm: Queue to be enabled as AVB
- - snps,map-to-dma-channel: Channel to map
- - Specifiy specific packet routing:
- - snps,route-avcp: AV Untagged Control packets
- - snps,route-ptp: PTP Packets
- - snps,route-dcbcp: DCB Control Packets
- - snps,route-up: Untagged Packets
- - snps,route-multi-broad: Multicast & Broadcast Packets
- - snps,priority: RX queue priority (Range: 0x0 to 0xF)
-- Multiple TX Queues parameters: below the list of all the parameters to
- configure the multiple TX queues:
- - snps,tx-queues-to-use: number of TX queues to be used in the driver
- - Choose one of these TX scheduling algorithms:
- - snps,tx-sched-wrr: Weighted Round Robin
- - snps,tx-sched-wfq: Weighted Fair Queuing
- - snps,tx-sched-dwrr: Deficit Weighted Round Robin
- - snps,tx-sched-sp: Strict priority
- - For each TX queue
- - snps,weight: TX queue weight (if using a DCB weight algorithm)
- - Choose one of these modes:
- - snps,dcb-algorithm: TX queue will be working in DCB
- - snps,avb-algorithm: TX queue will be working in AVB
- [Attention] Queue 0 is reserved for legacy traffic
- and so no AVB is available in this queue.
- - Configure Credit Base Shaper (if AVB Mode selected):
- - snps,send_slope: enable Low Power Interface
- - snps,idle_slope: unlock on WoL
- - snps,high_credit: max write outstanding req. limit
- - snps,low_credit: max read outstanding req. limit
- - snps,priority: TX queue priority (Range: 0x0 to 0xF)
-Examples:
-
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <0xf>;
- snps,rd_osr_lmt = <0xf>;
- snps,blen = <256 128 64 32 0 0 0>;
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <1>;
- snps,rx-sched-sp;
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,priority = <0x0>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- snps,tx-sched-wrr;
- queue0 {
- snps,weight = <0x10>;
- snps,dcb-algorithm;
- snps,priority = <0x0>;
- };
-
- queue1 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3E800>;
- snps,low_credit = <0xFFC18000>;
- snps,priority = <0x1>;
- };
- };
-
- gmac0: ethernet@e0800000 {
- compatible = "st,spear600-gmac";
- reg = <0xe0800000 0x8000>;
- interrupt-parent = <&vic1>;
- interrupts = <24 23 22>;
- interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- max-frame-size = <3800>;
- phy-mode = "gmii";
- snps,multicast-filter-bins = <256>;
- snps,perfect-filter-entries = <128>;
- rx-fifo-depth = <16384>;
- tx-fifo-depth = <16384>;
- clocks = <&clock>;
- clock-names = "stmmaceth";
- snps,axi-config = <&stmmac_axi_setup>;
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy1: ethernet-phy@0 {
- };
- };
- snps,mtl-rx-config = <&mtl_rx_setup>;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- };
+This file has moved to snps,dwmac.yaml.
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 08/13] dt-bindings: net: stmmac: Convert the binding to a schemas
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML
schema to enable the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 389 +++++++++++-
Documentation/devicetree/bindings/net/stmmac.txt | 179 +-----
2 files changed, 390 insertions(+), 178 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/snps,dwmac.yaml
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
new file mode 100644
index 000000000000..30e2ff7a2dcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MAC Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+ - Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ - Jose Abreu <joabreu@synopsys.com>
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ # Deprecated
+ - st,spear600-gmac
+
+ required:
+ - compatible
+
+properties:
+
+ # We need to include all the compatibles from schemas that will
+ # include that schemas, otherwise compatible won't validate for
+ # those.
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: Combined signal for various interrupt events
+ - description: The interrupt to manage the remote wake-up packet detection
+ - description: The interrupt that occurs when Rx exits the LPI state
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ - const: macirq
+ - const: eth_wake_irq
+ - const: eth_lpi
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: GMAC main clock
+ - description: Peripheral registers interface clock
+ - description:
+ PTP reference clock. This clock is used for programming the
+ Timestamp Addend Register. If not passed then the system
+ clock will be used and this is fine on some platforms.
+
+ clock-names:
+ additionalItems: true
+ contains:
+ enum:
+ - stmmaceth
+ - pclk
+ - ptp_ref
+
+ resets:
+ maxItems: 1
+ description:
+ MAC Reset signal.
+
+ reset-names:
+ const: stmmaceth
+
+ snps,axi-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ AXI BUS Mode parameters. Phandle to a node that can contain the
+ following properties
+ * snps,lpi_en, enable Low Power Interface
+ * snps,xit_frm, unlock on WoL
+ * snps,wr_osr_lmt, max write outstanding req. limit
+ * snps,rd_osr_lmt, max read outstanding req. limit
+ * snps,kbbe, do not cross 1KiB boundary.
+ * snps,blen, this is a vector of supported burst length.
+ * snps,fb, fixed-burst
+ * snps,mb, mixed-burst
+ * snps,rb, rebuild INCRx Burst
+
+ snps,mtl-rx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple RX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,rx-queues-to-use, number of RX queues to be used in the
+ driver
+ * Choose one of these RX scheduling algorithms
+ * snps,rx-sched-sp, Strict priority
+ * snps,rx-sched-wsp, Weighted Strict priority
+ * For each RX queue
+ * Choose one of these modes
+ * snps,dcb-algorithm, Queue to be enabled as DCB
+ * snps,avb-algorithm, Queue to be enabled as AVB
+ * snps,map-to-dma-channel, Channel to map
+ * Specifiy specific packet routing
+ * snps,route-avcp, AV Untagged Control packets
+ * snps,route-ptp, PTP Packets
+ * snps,route-dcbcp, DCB Control Packets
+ * snps,route-up, Untagged Packets
+ * snps,route-multi-broad, Multicast & Broadcast Packets
+ * snps,priority, RX queue priority (Range 0x0 to 0xF)
+
+ snps,mtl-tx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple TX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,tx-queues-to-use, number of TX queues to be used in the
+ driver
+ * Choose one of these TX scheduling algorithms
+ * snps,tx-sched-wrr, Weighted Round Robin
+ * snps,tx-sched-wfq, Weighted Fair Queuing
+ * snps,tx-sched-dwrr, Deficit Weighted Round Robin
+ * snps,tx-sched-sp, Strict priority
+ * For each TX queue
+ * snps,weight, TX queue weight (if using a DCB weight
+ algorithm)
+ * Choose one of these modes
+ * snps,dcb-algorithm, TX queue will be working in DCB
+ * snps,avb-algorithm, TX queue will be working in AVB
+ [Attention] Queue 0 is reserved for legacy traffic
+ and so no AVB is available in this queue.
+ * Configure Credit Base Shaper (if AVB Mode selected)
+ * snps,send_slope, enable Low Power Interface
+ * snps,idle_slope, unlock on WoL
+ * snps,high_credit, max write outstanding req. limit
+ * snps,low_credit, max read outstanding req. limit
+ * snps,priority, TX queue priority (Range 0x0 to 0xF)
+
+ snps,reset-gpio:
+ maxItems: 1
+ description:
+ PHY Reset GPIO
+
+ snps,reset-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that the PHY Reset is active low
+
+ snps,reset-delays-us:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - minItems: 3
+ maxItems: 3
+ description:
+ Triplet of delays. The 1st cell is reset pre-delay in micro
+ seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
+ cell is reset post-delay in micro seconds.
+
+ snps,aal:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Use Address-Aligned Beats
+
+ snps,fixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the fixed burst mode
+
+ snps,mixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the mixed burst mode
+
+ snps,force_thresh_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the threshold mode for both tx and rx
+
+ snps,force_sf_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the Store and Forward mode for both tx and
+ rx. This flag is ignored if force_thresh_dma_mode is set.
+
+ snps,en-tx-lpi-clockgating:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enable gating of the MAC TX clock during TX low-power mode
+
+ snps,multicast-filter-bins:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of multicast filter hash bins supported by this device
+ instance
+
+ snps,perfect-filter-entries:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of perfect filter entries supported by this device
+ instance
+
+ snps,ps-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Port selection speed that can be passed to the core when PCS
+ is supported. For example, this is used in case of SGMII and
+ MAC2MAC connection.
+
+ mdio:
+ type: object
+ description:
+ Creates and registers an MDIO bus.
+
+ properties:
+ compatible:
+ const: snps,dwmac-mdio
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - phy-connection-type
+
+dependencies:
+ snps,reset-active-low: ["snps,reset-gpio"]
+ snps,reset-delay-us: ["snps,reset-gpio"]
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ properties:
+ snps,pbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Programmable Burst Length (tx and rx)
+
+ snps,txpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Tx Programmable Burst Length. If set, DMA tx will use this
+ value rather than snps,pbl.
+
+ snps,rxpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [2, 4, 8]
+ description:
+ Rx Programmable Burst Length. If set, DMA rx will use this
+ value rather than snps,pbl.
+
+ snps,no-pbl-x8:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
+ rev < 3.50, don\'t multiply the values by 4.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ snps,tso:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enables the TSO feature otherwise it will be managed by
+ MAC HW capability register.
+
+examples:
+ - |
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+
+ queue1 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ };
+
+ gmac0: ethernet@e0800000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
+ phy-connection-type = "gmii";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <16384>;
+ tx-fifo-depth = <16384>;
+ clocks = <&clock>;
+ clock-names = "stmmaceth";
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@0 {
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index cb694062afff..7d48782767cb 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -1,178 +1 @@
-* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC)
-
-Required properties:
-- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or
- "snps,dwxgmac-<ip_version>", "snps,dwxgmac".
- For backwards compatibility: "st,spear600-gmac" is also supported.
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the STMMAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Valid interrupt names are:
- - "macirq" (combined signal for various interrupt events)
- - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
- - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state)
-- phy-mode: See ethernet.txt file in the same directory.
-- snps,reset-gpio gpio number for phy reset.
-- snps,reset-active-low boolean flag to indicate if phy reset is active low.
-- snps,reset-delays-us is triplet of delays
- The 1st cell is reset pre-delay in micro seconds.
- The 2nd cell is reset pulse in micro seconds.
- The 3rd cell is reset post-delay in micro seconds.
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
- reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock and
- the second clock should be peripheral's register interface clock. Further
- clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
-- ptp_ref: this is the PTP reference clock; in case of the PTP is available
- this clock is used for programming the Timestamp Addend Register. If not
- passed then the system clock will be used and this is fine on some
- platforms.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
-- snps,pbl Programmable Burst Length (tx and rx)
-- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA tx will use this value rather than snps,pbl.
-- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA rx will use this value rather than snps,pbl.
-- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8.
- For core rev < 3.50, don't multiply the values by 4.
-- snps,aal Address-Aligned Beats
-- snps,fixed-burst Program the DMA to use the fixed burst mode
-- snps,mixed-burst Program the DMA to use the mixed burst mode
-- snps,force_thresh_dma_mode Force DMA to use the threshold mode for
- both tx and rx
-- snps,force_sf_dma_mode Force DMA to use the Store and Forward
- mode for both tx and rx. This flag is
- ignored if force_thresh_dma_mode is set.
-- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during
- TX low-power mode
-- snps,multicast-filter-bins: Number of multicast filter hash bins
- supported by this device instance
-- snps,perfect-filter-entries: Number of perfect filter entries supported
- by this device instance
-- snps,ps-speed: port selection speed that can be passed to the core when
- PCS is supported. For example, this is used in case of SGMII
- and MAC2MAC connection.
-- snps,tso: this enables the TSO feature otherwise it will be managed by
- MAC HW capability register. Only for GMAC4 and newer.
-- AXI BUS Mode parameters: below the list of all the parameters to program the
- AXI register inside the DMA module:
- - snps,lpi_en: enable Low Power Interface
- - snps,xit_frm: unlock on WoL
- - snps,wr_osr_lmt: max write outstanding req. limit
- - snps,rd_osr_lmt: max read outstanding req. limit
- - snps,kbbe: do not cross 1KiB boundary.
- - snps,blen: this is a vector of supported burst length.
- - snps,fb: fixed-burst
- - snps,mb: mixed-burst
- - snps,rb: rebuild INCRx Burst
-- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
-- Multiple RX Queues parameters: below the list of all the parameters to
- configure the multiple RX queues:
- - snps,rx-queues-to-use: number of RX queues to be used in the driver
- - Choose one of these RX scheduling algorithms:
- - snps,rx-sched-sp: Strict priority
- - snps,rx-sched-wsp: Weighted Strict priority
- - For each RX queue
- - Choose one of these modes:
- - snps,dcb-algorithm: Queue to be enabled as DCB
- - snps,avb-algorithm: Queue to be enabled as AVB
- - snps,map-to-dma-channel: Channel to map
- - Specifiy specific packet routing:
- - snps,route-avcp: AV Untagged Control packets
- - snps,route-ptp: PTP Packets
- - snps,route-dcbcp: DCB Control Packets
- - snps,route-up: Untagged Packets
- - snps,route-multi-broad: Multicast & Broadcast Packets
- - snps,priority: RX queue priority (Range: 0x0 to 0xF)
-- Multiple TX Queues parameters: below the list of all the parameters to
- configure the multiple TX queues:
- - snps,tx-queues-to-use: number of TX queues to be used in the driver
- - Choose one of these TX scheduling algorithms:
- - snps,tx-sched-wrr: Weighted Round Robin
- - snps,tx-sched-wfq: Weighted Fair Queuing
- - snps,tx-sched-dwrr: Deficit Weighted Round Robin
- - snps,tx-sched-sp: Strict priority
- - For each TX queue
- - snps,weight: TX queue weight (if using a DCB weight algorithm)
- - Choose one of these modes:
- - snps,dcb-algorithm: TX queue will be working in DCB
- - snps,avb-algorithm: TX queue will be working in AVB
- [Attention] Queue 0 is reserved for legacy traffic
- and so no AVB is available in this queue.
- - Configure Credit Base Shaper (if AVB Mode selected):
- - snps,send_slope: enable Low Power Interface
- - snps,idle_slope: unlock on WoL
- - snps,high_credit: max write outstanding req. limit
- - snps,low_credit: max read outstanding req. limit
- - snps,priority: TX queue priority (Range: 0x0 to 0xF)
-Examples:
-
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <0xf>;
- snps,rd_osr_lmt = <0xf>;
- snps,blen = <256 128 64 32 0 0 0>;
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <1>;
- snps,rx-sched-sp;
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,priority = <0x0>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- snps,tx-sched-wrr;
- queue0 {
- snps,weight = <0x10>;
- snps,dcb-algorithm;
- snps,priority = <0x0>;
- };
-
- queue1 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3E800>;
- snps,low_credit = <0xFFC18000>;
- snps,priority = <0x1>;
- };
- };
-
- gmac0: ethernet@e0800000 {
- compatible = "st,spear600-gmac";
- reg = <0xe0800000 0x8000>;
- interrupt-parent = <&vic1>;
- interrupts = <24 23 22>;
- interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- max-frame-size = <3800>;
- phy-mode = "gmii";
- snps,multicast-filter-bins = <256>;
- snps,perfect-filter-entries = <128>;
- rx-fifo-depth = <16384>;
- tx-fifo-depth = <16384>;
- clocks = <&clock>;
- clock-names = "stmmaceth";
- snps,axi-config = <&stmmac_axi_setup>;
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy1: ethernet-phy@0 {
- };
- };
- snps,mtl-rx-config = <&mtl_rx_setup>;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- };
+This file has moved to snps,dwmac.yaml.
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 09/13] dt-bindings: net: sun7i-gmac: Convert the binding to a schemas
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Switch our Allwinner A20 GMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt | 27 ---------------------------
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
3 files changed, 69 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
deleted file mode 100644
index 8b3f953656e3..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Allwinner GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
- - compatible: Should be "allwinner,sun7i-a20-gmac"
- - clocks: Should contain the GMAC main clock, and tx clock
- The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
- - clock-names: Should contain the clock names "stmmaceth",
- and "allwinner_gmac_tx"
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Examples:
-
- gmac: ethernet@1c50000 {
- compatible = "allwinner,sun7i-a20-gmac";
- reg = <0x01c50000 0x10000>,
- <0x01c20164 0x4>;
- interrupts = <0 85 1>;
- interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx>;
- clock-names = "stmmaceth", "allwinner_gmac_tx";
- phy-mode = "mii";
- };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
new file mode 100644
index 000000000000..38f6a2a73f46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC Device Tree Bindings
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ const: allwinner,sun7i-a20-gmac
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: TX clock
+
+ clock-names:
+ items:
+ - const: stmmaceth
+ - const: allwinner_gmac_tx
+
+ phy-supply:
+ description:
+ PHY regulator
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phy-connection-type
+
+examples:
+ - |
+ gmac: ethernet@1c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>,
+ <0x01c20164 0x4>;
+ interrupts = <0 85 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ phy-connection-type = "mii";
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 30e2ff7a2dcb..fed623a81dcd 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -44,6 +44,7 @@ properties:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
@@ -265,6 +266,7 @@ allOf:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
@@ -305,6 +307,7 @@ allOf:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwxgmac
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 09/13] dt-bindings: net: sun7i-gmac: Convert the binding to a schemas
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Switch our Allwinner A20 GMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt | 27 ---------------------------
Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
3 files changed, 69 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
deleted file mode 100644
index 8b3f953656e3..000000000000
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Allwinner GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
- - compatible: Should be "allwinner,sun7i-a20-gmac"
- - clocks: Should contain the GMAC main clock, and tx clock
- The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
- - clock-names: Should contain the clock names "stmmaceth",
- and "allwinner_gmac_tx"
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Examples:
-
- gmac: ethernet@1c50000 {
- compatible = "allwinner,sun7i-a20-gmac";
- reg = <0x01c50000 0x10000>,
- <0x01c20164 0x4>;
- interrupts = <0 85 1>;
- interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx>;
- clock-names = "stmmaceth", "allwinner_gmac_tx";
- phy-mode = "mii";
- };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
new file mode 100644
index 000000000000..38f6a2a73f46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC Device Tree Bindings
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ const: allwinner,sun7i-a20-gmac
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: TX clock
+
+ clock-names:
+ items:
+ - const: stmmaceth
+ - const: allwinner_gmac_tx
+
+ phy-supply:
+ description:
+ PHY regulator
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phy-connection-type
+
+examples:
+ - |
+ gmac: ethernet@1c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>,
+ <0x01c20164 0x4>;
+ interrupts = <0 85 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ phy-connection-type = "mii";
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 30e2ff7a2dcb..fed623a81dcd 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -44,6 +44,7 @@ properties:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
@@ -265,6 +266,7 @@ allOf:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
@@ -305,6 +307,7 @@ allOf:
compatible:
contains:
enum:
+ - allwinner,sun7i-a20-gmac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwxgmac
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 10/13] dt-bindings: net: sun8i-emac: Convert the binding to a schemas
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit, Rob Herring
Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +---------------------------------------------
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 15 +++-
3 files changed, 336 insertions(+), 201 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
new file mode 100644
index 000000000000..6f68c7f5fc34
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -0,0 +1,321 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t EMAC Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-emac
+ - const: allwinner,sun8i-h3-emac
+ - const: allwinner,sun8i-r40-emac
+ - const: allwinner,sun8i-v3s-emac
+ - const: allwinner,sun50i-a64-emac
+ - items:
+ - const: allwinner,sun50i-h6-emac
+ - const: allwinner,sun50i-a64-emac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: stmmaceth
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to the device containing the EMAC or GMAC clock
+ register
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phy-connection-type
+ - phy-handle
+ - syscon
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
+
+ then:
+ properties:
+ allwinner,tx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 3100
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-r40-emac
+
+ then:
+ properties:
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+
+ then:
+ properties:
+ allwinner,leds-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ EPHY LEDs are active low.
+
+ mdio-mux:
+ type: object
+
+ properties:
+ compatible:
+ const: allwinner,sun8i-h3-mdio-mux
+
+ mdio-parent-bus:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to EMAC MDIO.
+
+ mdio@1:
+ type: object
+ description: Internal MDIO Bus
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun8i-h3-mdio-internal
+
+ reg:
+ const: 1
+
+ patternProperties:
+ "^ethernet-phy@[0-9a-f]$":
+ type: object
+ description:
+ Integrated PHY node
+
+ properties:
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+ - resets
+
+
+ mdio@2:
+ type: object
+ description: External MDIO Bus (H3 only)
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ const: 2
+
+ required:
+ - compatible
+ - mdio-parent-bus
+ - mdio@1
+
+examples:
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&int_mii_phy>;
+ phy-connection-type = "mii";
+ allwinner,leds-active-low;
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio1>;
+
+ int_mii_phy: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ phy-is-integrated;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&ext_rgmii_phy>;
+ phy-connection-type = "rgmii";
+ allwinner,leds-active-low;
+
+ mdio2: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio2>;
+
+ mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-a83t-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 13>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+ phy-handle = <&ext_rgmii_phy1>;
+ phy-connection-type = "rgmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
deleted file mode 100644
index 54c66d0611cb..000000000000
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ /dev/null
@@ -1,201 +0,0 @@
-* Allwinner sun8i GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
-- compatible: must be one of the following string:
- "allwinner,sun8i-a83t-emac"
- "allwinner,sun8i-h3-emac"
- "allwinner,sun8i-r40-gmac"
- "allwinner,sun8i-v3s-emac"
- "allwinner,sun50i-a64-emac"
- "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac"
-- reg: address and length of the register for the device.
-- interrupts: interrupt for the device
-- interrupt-names: must be "macirq"
-- clocks: A phandle to the reference clock for this device
-- clock-names: must be "stmmaceth"
-- resets: A phandle to the reset control for this device
-- reset-names: must be "stmmaceth"
-- phy-mode: See ethernet.txt
-- phy-handle: See ethernet.txt
-- syscon: A phandle to the device containing the EMAC or GMAC clock register
-
-Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps.
- Range is 0-700. Default is 0.
- Unavailable for allwinner,sun8i-r40-gmac
-- allwinner,rx-delay-ps: RX clock delay chain value in ps.
- Range is 0-3100. Default is 0.
- Range is 0-700 for allwinner,sun8i-r40-gmac
-Both delay properties need to be a multiple of 100. They control the
-clock delay for external RGMII PHY. They do not apply to the internal
-PHY or external non-RGMII PHYs.
-
-Optional properties for the following compatibles:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-- allwinner,leds-active-low: EPHY LEDs are active low
-
-Required child node of emac:
-- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio"
-
-Required properties of the mdio node:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-The device node referenced by "phy" or "phy-handle" must be a child node
-of the mdio node. See phy.txt for the generic PHY bindings.
-
-The following compatibles require that the emac node have a mdio-mux child
-node called "mdio-mux":
- - "allwinner,sun8i-h3-emac"
- - "allwinner,sun8i-v3s-emac":
-Required properties for the mdio-mux node:
- - compatible = "allwinner,sun8i-h3-mdio-mux"
- - mdio-parent-bus: a phandle to EMAC mdio
- - one child mdio for the integrated mdio with the compatible
- "allwinner,sun8i-h3-mdio-internal"
- - one child mdio for the external mdio if present (V3s have none)
-Required properties for the mdio-mux children node:
- - reg: 1 for internal MDIO bus, 2 for external MDIO bus
-
-The following compatibles require a PHY node representing the integrated
-PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-
-Additional information regarding generic multiplexer properties can be found
-at Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Required properties of the integrated phy node:
-- clocks: a phandle to the reference clock for the EPHY
-- resets: a phandle to the reset control for the EPHY
-- Must be a child of the integrated mdio
-
-Example with integrated PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- phy-is-integrated;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-Example with external PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- }:
- };
-};
-
-Example with SoC without integrated PHY
-
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-a83t-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index fed623a81dcd..956308806c33 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -45,6 +45,11 @@ properties:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
@@ -267,6 +272,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
@@ -308,6 +318,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwxgmac
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 10/13] dt-bindings: net: sun8i-emac: Convert the binding to a schemas
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Maxime Coquelin, linux-stm32, linux-arm-kernel, Heiner Kallweit
Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +---------------------------------------------
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 15 +++-
3 files changed, 336 insertions(+), 201 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
new file mode 100644
index 000000000000..6f68c7f5fc34
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -0,0 +1,321 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t EMAC Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-emac
+ - const: allwinner,sun8i-h3-emac
+ - const: allwinner,sun8i-r40-emac
+ - const: allwinner,sun8i-v3s-emac
+ - const: allwinner,sun50i-a64-emac
+ - items:
+ - const: allwinner,sun50i-h6-emac
+ - const: allwinner,sun50i-a64-emac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: stmmaceth
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to the device containing the EMAC or GMAC clock
+ register
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phy-connection-type
+ - phy-handle
+ - syscon
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
+
+ then:
+ properties:
+ allwinner,tx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 3100
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-r40-emac
+
+ then:
+ properties:
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+
+ then:
+ properties:
+ allwinner,leds-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ EPHY LEDs are active low.
+
+ mdio-mux:
+ type: object
+
+ properties:
+ compatible:
+ const: allwinner,sun8i-h3-mdio-mux
+
+ mdio-parent-bus:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to EMAC MDIO.
+
+ mdio@1:
+ type: object
+ description: Internal MDIO Bus
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun8i-h3-mdio-internal
+
+ reg:
+ const: 1
+
+ patternProperties:
+ "^ethernet-phy@[0-9a-f]$":
+ type: object
+ description:
+ Integrated PHY node
+
+ properties:
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+ - resets
+
+
+ mdio@2:
+ type: object
+ description: External MDIO Bus (H3 only)
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ const: 2
+
+ required:
+ - compatible
+ - mdio-parent-bus
+ - mdio@1
+
+examples:
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&int_mii_phy>;
+ phy-connection-type = "mii";
+ allwinner,leds-active-low;
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio1>;
+
+ int_mii_phy: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ phy-is-integrated;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&ext_rgmii_phy>;
+ phy-connection-type = "rgmii";
+ allwinner,leds-active-low;
+
+ mdio2: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio2>;
+
+ mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-a83t-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 13>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+ phy-handle = <&ext_rgmii_phy1>;
+ phy-connection-type = "rgmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
deleted file mode 100644
index 54c66d0611cb..000000000000
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ /dev/null
@@ -1,201 +0,0 @@
-* Allwinner sun8i GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
-- compatible: must be one of the following string:
- "allwinner,sun8i-a83t-emac"
- "allwinner,sun8i-h3-emac"
- "allwinner,sun8i-r40-gmac"
- "allwinner,sun8i-v3s-emac"
- "allwinner,sun50i-a64-emac"
- "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac"
-- reg: address and length of the register for the device.
-- interrupts: interrupt for the device
-- interrupt-names: must be "macirq"
-- clocks: A phandle to the reference clock for this device
-- clock-names: must be "stmmaceth"
-- resets: A phandle to the reset control for this device
-- reset-names: must be "stmmaceth"
-- phy-mode: See ethernet.txt
-- phy-handle: See ethernet.txt
-- syscon: A phandle to the device containing the EMAC or GMAC clock register
-
-Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps.
- Range is 0-700. Default is 0.
- Unavailable for allwinner,sun8i-r40-gmac
-- allwinner,rx-delay-ps: RX clock delay chain value in ps.
- Range is 0-3100. Default is 0.
- Range is 0-700 for allwinner,sun8i-r40-gmac
-Both delay properties need to be a multiple of 100. They control the
-clock delay for external RGMII PHY. They do not apply to the internal
-PHY or external non-RGMII PHYs.
-
-Optional properties for the following compatibles:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-- allwinner,leds-active-low: EPHY LEDs are active low
-
-Required child node of emac:
-- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio"
-
-Required properties of the mdio node:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-The device node referenced by "phy" or "phy-handle" must be a child node
-of the mdio node. See phy.txt for the generic PHY bindings.
-
-The following compatibles require that the emac node have a mdio-mux child
-node called "mdio-mux":
- - "allwinner,sun8i-h3-emac"
- - "allwinner,sun8i-v3s-emac":
-Required properties for the mdio-mux node:
- - compatible = "allwinner,sun8i-h3-mdio-mux"
- - mdio-parent-bus: a phandle to EMAC mdio
- - one child mdio for the integrated mdio with the compatible
- "allwinner,sun8i-h3-mdio-internal"
- - one child mdio for the external mdio if present (V3s have none)
-Required properties for the mdio-mux children node:
- - reg: 1 for internal MDIO bus, 2 for external MDIO bus
-
-The following compatibles require a PHY node representing the integrated
-PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-
-Additional information regarding generic multiplexer properties can be found
-at Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Required properties of the integrated phy node:
-- clocks: a phandle to the reference clock for the EPHY
-- resets: a phandle to the reset control for the EPHY
-- Must be a child of the integrated mdio
-
-Example with integrated PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- phy-is-integrated;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-Example with external PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- }:
- };
-};
-
-Example with SoC without integrated PHY
-
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-a83t-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index fed623a81dcd..956308806c33 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -45,6 +45,11 @@ properties:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
@@ -267,6 +272,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
@@ -308,6 +318,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwxgmac
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 11/13] dt-bindings: net: dwmac: Deprecate the PHY reset properties
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit,
Martin Blumenstingl, Rob Herring
Even though the DWMAC driver uses some driver specific properties, the PHY
core has a bunch of generic properties and can deal with them nicely.
Let's deprecate our specific properties.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 956308806c33..0bf322408500 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -172,16 +172,19 @@ properties:
* snps,priority, TX queue priority (Range 0x0 to 0xF)
snps,reset-gpio:
+ deprecated: true
maxItems: 1
description:
PHY Reset GPIO
snps,reset-active-low:
+ deprecated: true
$ref: /schemas/types.yaml#definitions/flag
description:
Indicates that the PHY Reset is active low
snps,reset-delays-us:
+ deprecated: true
allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array
- minItems: 3
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 11/13] dt-bindings: net: dwmac: Deprecate the PHY reset properties
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Rob Herring, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, Maxime Chevallier,
Martin Blumenstingl, Maxime Coquelin, linux-stm32,
linux-arm-kernel, Heiner Kallweit
Even though the DWMAC driver uses some driver specific properties, the PHY
core has a bunch of generic properties and can deal with them nicely.
Let's deprecate our specific properties.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 956308806c33..0bf322408500 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -172,16 +172,19 @@ properties:
* snps,priority, TX queue priority (Range 0x0 to 0xF)
snps,reset-gpio:
+ deprecated: true
maxItems: 1
description:
PHY Reset GPIO
snps,reset-active-low:
+ deprecated: true
$ref: /schemas/types.yaml#definitions/flag
description:
Indicates that the PHY Reset is active low
snps,reset-delays-us:
+ deprecated: true
allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array
- minItems: 3
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 12/13] ARM: dts: sunxi: Switch to the generic PHY properties
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
The DWMAC specific properties to manage the PHY have been superseeded by
the generic PHY properties. Let's move to it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 6 +++---
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 6 +++---
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 9 ++++-----
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 8 ++++----
4 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 09832b4e8fc8..2652d737fe7c 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -155,13 +155,13 @@
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
- snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 8e724c52feff..7899712400b2 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -95,13 +95,13 @@
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_dldo1>;
- snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index fd0153f65685..b01d91d025ec 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -103,15 +103,14 @@
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index c34a83f666c7..ca12cee27072 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -108,14 +108,14 @@
phy = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
-
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy3: ethernet-phy@3 {
reg = <3>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
};
};
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 12/13] ARM: dts: sunxi: Switch to the generic PHY properties
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: devicetree, Florian Fainelli, Alexandre Torgue, Andrew Lunn,
Antoine Ténart, netdev, Maxime Chevallier, Maxime Coquelin,
linux-stm32, linux-arm-kernel, Heiner Kallweit
The DWMAC specific properties to manage the PHY have been superseeded by
the generic PHY properties. Let's move to it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 6 +++---
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 6 +++---
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 9 ++++-----
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 8 ++++----
4 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 09832b4e8fc8..2652d737fe7c 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -155,13 +155,13 @@
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
- snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 8e724c52feff..7899712400b2 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -95,13 +95,13 @@
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_dldo1>;
- snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index fd0153f65685..b01d91d025ec 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -103,15 +103,14 @@
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index c34a83f666c7..ca12cee27072 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -108,14 +108,14 @@
phy = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
-
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy3: ethernet-phy@3 {
reg = <3>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
};
};
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:31 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
The phy device tree property has been deprecated in favor of phy-handle,
let's replace it.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-colombus.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-i7.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
41 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 6c254ec4c85b..8692b11a83c3 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -125,7 +125,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 38a2c4134952..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -68,7 +68,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 7306c65df88a..6ca02e824acc 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -114,7 +114,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index cc988ccd5ca7..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -80,7 +80,7 @@
};
&emac {
- phy = <&phy0>;
+ phy-handle = <&phy0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
index 80ecd78247ac..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -58,7 +58,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 247fa27ef717..8a7b4c53d278 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -94,7 +94,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 58ad2ad9041f..a843e57530ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -105,7 +105,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index a8e537fd4bd6..845f76824d57 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -112,7 +112,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 0f1e781069e9..83287b6c975e 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -110,7 +110,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 5340b4164df2..7033a123c9a3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -98,7 +98,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pa_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index b5ee8fb13a92..1f74ba1634cc 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -91,7 +91,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pd_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index c3d56dc93513..50092b0bd0fe 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -76,7 +76,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 2652d737fe7c..7c611ddbaf2f 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -153,7 +153,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 091eb2ac53b3..ebb0b4710afb 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -117,7 +117,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 6eafb6361a26..4910c6ccf2f7 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -84,7 +84,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index ca036f97923a..703e1c19b407 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -84,7 +84,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 72a02c045a38..6e9ec3f1695e 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -67,7 +67,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 4865c3271ab0..c92779bc8f85 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 7899712400b2..e993b2d8ddd0 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -92,7 +92,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index e2bfe0058830..c601ecf5ab35 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -129,7 +129,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 4df921632f7a..c5730b30a15d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -131,7 +131,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 0176e9de0180..86f4ebb77703 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -109,7 +109,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 08e5a5abf8cc..e322f0f06003 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 99f531b8d2a7..a8f7f63fdde1 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -150,7 +150,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index b01d91d025ec..322717cb0b9a 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -100,7 +100,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 5f1c4f573d3e..8a610dacb983 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
index 7449aac3f43b..a20e91c8dbe5 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -76,7 +76,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
index b90a7607d069..c27567c0b027 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -97,7 +97,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index b8a1aaaf3976..bde0ef783e71 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -82,7 +82,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index f0e6a96e5785..f419b9ee9d1e 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -111,7 +111,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index ca12cee27072..d3d03b7ffb1a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -105,7 +105,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy3>;
+ phy-handle = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index e40dd47df8ce..70a883276d34 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -106,7 +106,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 56f451c07f93..0fe657e062a7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -111,7 +111,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 0dcba070444a..559736961b54 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -118,7 +118,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 9628041bb3a3..a94ff50bcf73 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -120,7 +120,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 7b3532665c28..956579a10b5f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -96,7 +96,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 173b676436e9..993fb97d19df 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -114,7 +114,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 14a88aa16a97..02e321523d0e 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -122,7 +122,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index f8475a39777b..9dfe7e2a08cc 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -81,7 +81,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 18156ffa3ce9..650890b049e2 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -128,7 +128,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_cldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 2ed28d9e2787..03ad25534f20 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -123,7 +123,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_cldo1>;
status = "okay";
--
git-series 0.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
@ 2019-06-27 15:31 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:31 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Ripard
Cc: devicetree, Florian Fainelli, Alexandre Torgue, Andrew Lunn,
Antoine Ténart, netdev, Maxime Chevallier, Maxime Coquelin,
linux-stm32, linux-arm-kernel, Heiner Kallweit
The phy device tree property has been deprecated in favor of phy-handle,
let's replace it.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-colombus.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-i7.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 2 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
41 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 6c254ec4c85b..8692b11a83c3 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -125,7 +125,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 38a2c4134952..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -68,7 +68,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 7306c65df88a..6ca02e824acc 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -114,7 +114,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index cc988ccd5ca7..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -80,7 +80,7 @@
};
&emac {
- phy = <&phy0>;
+ phy-handle = <&phy0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
index 80ecd78247ac..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -58,7 +58,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 247fa27ef717..8a7b4c53d278 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -94,7 +94,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 58ad2ad9041f..a843e57530ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -105,7 +105,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index a8e537fd4bd6..845f76824d57 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -112,7 +112,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 0f1e781069e9..83287b6c975e 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -110,7 +110,7 @@
};
&emac {
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 5340b4164df2..7033a123c9a3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -98,7 +98,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pa_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index b5ee8fb13a92..1f74ba1634cc 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -91,7 +91,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pd_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index c3d56dc93513..50092b0bd0fe 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -76,7 +76,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 2652d737fe7c..7c611ddbaf2f 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -153,7 +153,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 091eb2ac53b3..ebb0b4710afb 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -117,7 +117,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 6eafb6361a26..4910c6ccf2f7 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -84,7 +84,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index ca036f97923a..703e1c19b407 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -84,7 +84,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 72a02c045a38..6e9ec3f1695e 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -67,7 +67,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 4865c3271ab0..c92779bc8f85 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 7899712400b2..e993b2d8ddd0 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -92,7 +92,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_dldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index e2bfe0058830..c601ecf5ab35 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -129,7 +129,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 4df921632f7a..c5730b30a15d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -131,7 +131,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 0176e9de0180..86f4ebb77703 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -109,7 +109,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 08e5a5abf8cc..e322f0f06003 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 99f531b8d2a7..a8f7f63fdde1 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -150,7 +150,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index b01d91d025ec..322717cb0b9a 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -100,7 +100,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 5f1c4f573d3e..8a610dacb983 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -115,7 +115,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
index 7449aac3f43b..a20e91c8dbe5 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -76,7 +76,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
index b90a7607d069..c27567c0b027 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -97,7 +97,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index b8a1aaaf3976..bde0ef783e71 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -82,7 +82,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index f0e6a96e5785..f419b9ee9d1e 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -111,7 +111,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index ca12cee27072..d3d03b7ffb1a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -105,7 +105,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy3>;
+ phy-handle = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index e40dd47df8ce..70a883276d34 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -106,7 +106,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 56f451c07f93..0fe657e062a7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -111,7 +111,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 0dcba070444a..559736961b54 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -118,7 +118,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 9628041bb3a3..a94ff50bcf73 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -120,7 +120,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 7b3532665c28..956579a10b5f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -96,7 +96,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 173b676436e9..993fb97d19df 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -114,7 +114,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 14a88aa16a97..02e321523d0e 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -122,7 +122,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index f8475a39777b..9dfe7e2a08cc 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -81,7 +81,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 18156ffa3ce9..650890b049e2 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -128,7 +128,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_cldo1>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 2ed28d9e2787..03ad25534f20 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -123,7 +123,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_cldo1>;
status = "okay";
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [PATCH v4 01/13] dt-bindings: net: Add YAML schemas for the generic Ethernet options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:37 ` Andrew Lunn
-1 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:37 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Coquelin, Alexandre Torgue, netdev,
linux-arm-kernel, devicetree, linux-stm32, Maxime Chevallier,
Antoine Ténart, Florian Fainelli, Heiner Kallweit,
Rob Herring
On Thu, Jun 27, 2019 at 05:31:43PM +0200, Maxime Ripard wrote:
> The Ethernet controllers have a good number of generic options that can be
> needed in a device tree. Add a YAML schemas for those.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 01/13] dt-bindings: net: Add YAML schemas for the generic Ethernet options
@ 2019-06-27 15:37 ` Andrew Lunn
0 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:37 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Rob Herring, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Rob Herring, Maxime Coquelin, Maxime Chevallier,
Frank Rowand, David S . Miller, linux-arm-kernel,
Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:43PM +0200, Maxime Ripard wrote:
> The Ethernet controllers have a good number of generic options that can be
> needed in a device tree. Add a YAML schemas for those.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:39 ` Andrew Lunn
-1 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:39 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Coquelin, Alexandre Torgue, netdev,
linux-arm-kernel, devicetree, linux-stm32, Maxime Chevallier,
Antoine Ténart, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:45PM +0200, Maxime Ripard wrote:
> The MDIO buses have a number of available device tree properties that can
> be used in their device tree node. Add a YAML schemas for those.
>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 15:39 ` Andrew Lunn
0 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:39 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Antoine Ténart, netdev, linux-stm32, Chen-Yu Tsai,
Rob Herring, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller, linux-arm-kernel, Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:45PM +0200, Maxime Ripard wrote:
> The MDIO buses have a number of available device tree properties that can
> be used in their device tree node. Add a YAML schemas for those.
>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 11/13] dt-bindings: net: dwmac: Deprecate the PHY reset properties
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:40 ` Andrew Lunn
-1 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:40 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Coquelin, Alexandre Torgue, netdev,
linux-arm-kernel, devicetree, linux-stm32, Maxime Chevallier,
Antoine Ténart, Florian Fainelli, Heiner Kallweit,
Martin Blumenstingl, Rob Herring
On Thu, Jun 27, 2019 at 05:31:53PM +0200, Maxime Ripard wrote:
> Even though the DWMAC driver uses some driver specific properties, the PHY
> core has a bunch of generic properties and can deal with them nicely.
>
> Let's deprecate our specific properties.
>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 11/13] dt-bindings: net: dwmac: Deprecate the PHY reset properties
@ 2019-06-27 15:40 ` Andrew Lunn
0 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:40 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Rob Herring, Antoine Ténart, netdev, linux-stm32,
Martin Blumenstingl, Chen-Yu Tsai, Rob Herring, Maxime Coquelin,
Maxime Chevallier, Frank Rowand, David S . Miller,
linux-arm-kernel, Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:53PM +0200, Maxime Ripard wrote:
> Even though the DWMAC driver uses some driver specific properties, the PHY
> core has a bunch of generic properties and can deal with them nicely.
>
> Let's deprecate our specific properties.
>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:41 ` Andrew Lunn
-1 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:41 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Chen-Yu Tsai, Maxime Coquelin, Alexandre Torgue, netdev,
linux-arm-kernel, devicetree, linux-stm32, Maxime Chevallier,
Antoine Ténart, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:55PM +0200, Maxime Ripard wrote:
> The phy device tree property has been deprecated in favor of phy-handle,
> let's replace it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
@ 2019-06-27 15:41 ` Andrew Lunn
0 siblings, 0 replies; 57+ messages in thread
From: Andrew Lunn @ 2019-06-27 15:41 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Antoine Ténart, netdev, linux-stm32, Chen-Yu Tsai,
Rob Herring, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller, linux-arm-kernel, Heiner Kallweit
On Thu, Jun 27, 2019 at 05:31:55PM +0200, Maxime Ripard wrote:
> The phy device tree property has been deprecated in favor of phy-handle,
> let's replace it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 15:48 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 15:48 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The MDIO buses have a number of available device tree properties that can
> be used in their device tree node. Add a YAML schemas for those.
>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> 2 files changed, 52 insertions(+), 37 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
However, some comments for a follow-up...
> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> new file mode 100644
> index 000000000000..b8fa8251c4bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mdio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MDIO Bus Generic Binding
> +
> +maintainers:
> + - Andrew Lunn <andrew@lunn.ch>
> + - Florian Fainelli <f.fainelli@gmail.com>
> + - Heiner Kallweit <hkallweit1@gmail.com>
> +
> +description:
> + These are generic properties that can apply to any MDIO bus. Any
> + MDIO bus must have a list of child nodes, one per device on the
> + bus. These should follow the generic ethernet-phy.yaml document, or
> + a device specific binding document.
> +
> +properties:
> + reset-gpios:
> + maxItems: 1
> + description:
> + The phandle and specifier for the GPIO that controls the RESET
> + lines of all PHYs on that MDIO bus.
> +
> + reset-delay-us:
> + description:
> + RESET pulse width in microseconds. It applies to all PHY devices
> + and must therefore be appropriately determined based on all PHY
> + requirements (maximum value of all per-PHY RESET pulse widths).
> +
> +examples:
> + - |
> + davinci_mdio: mdio@5c030000 {
Can we enforce nodename to be mdio? That may not work for muxes.
You'll probably have to implement it and see.
> + compatible = "ti,davinci_mdio";
> + reg = <0x5c030000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
These 2 should have a schema.
> +
> + reset-gpios = <&gpio2 5 1>;
> + reset-delay-us = <2>;
> +
> + ethphy0: ethernet-phy@1 {
> + reg = <1>;
Need a child node schema to validate the unit-address and reg property.
> + };
> +
> + ethphy1: ethernet-phy@3 {
> + reg = <3>;
> + };
> + };
> --
> git-series 0.9.1
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 15:48 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 15:48 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The MDIO buses have a number of available device tree properties that can
> be used in their device tree node. Add a YAML schemas for those.
>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> 2 files changed, 52 insertions(+), 37 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
However, some comments for a follow-up...
> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> new file mode 100644
> index 000000000000..b8fa8251c4bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mdio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MDIO Bus Generic Binding
> +
> +maintainers:
> + - Andrew Lunn <andrew@lunn.ch>
> + - Florian Fainelli <f.fainelli@gmail.com>
> + - Heiner Kallweit <hkallweit1@gmail.com>
> +
> +description:
> + These are generic properties that can apply to any MDIO bus. Any
> + MDIO bus must have a list of child nodes, one per device on the
> + bus. These should follow the generic ethernet-phy.yaml document, or
> + a device specific binding document.
> +
> +properties:
> + reset-gpios:
> + maxItems: 1
> + description:
> + The phandle and specifier for the GPIO that controls the RESET
> + lines of all PHYs on that MDIO bus.
> +
> + reset-delay-us:
> + description:
> + RESET pulse width in microseconds. It applies to all PHY devices
> + and must therefore be appropriately determined based on all PHY
> + requirements (maximum value of all per-PHY RESET pulse widths).
> +
> +examples:
> + - |
> + davinci_mdio: mdio@5c030000 {
Can we enforce nodename to be mdio? That may not work for muxes.
You'll probably have to implement it and see.
> + compatible = "ti,davinci_mdio";
> + reg = <0x5c030000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
These 2 should have a schema.
> +
> + reset-gpios = <&gpio2 5 1>;
> + reset-delay-us = <2>;
> +
> + ethphy0: ethernet-phy@1 {
> + reg = <1>;
Need a child node schema to validate the unit-address and reg property.
> + };
> +
> + ethphy1: ethernet-phy@3 {
> + reg = <3>;
> + };
> + };
> --
> git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 15:48 ` Rob Herring
(?)
@ 2019-06-27 15:57 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:57 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
[-- Attachment #1: Type: text/plain, Size: 3124 bytes --]
Hi Rob,
On Thu, Jun 27, 2019 at 09:48:06AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > The MDIO buses have a number of available device tree properties that can
> > be used in their device tree node. Add a YAML schemas for those.
> >
> > Suggested-by: Andrew Lunn <andrew@lunn.ch>
> > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> > Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> > 2 files changed, 52 insertions(+), 37 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> However, some comments for a follow-up...
>
> > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> > new file mode 100644
> > index 000000000000..b8fa8251c4bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> > @@ -0,0 +1,51 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/mdio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MDIO Bus Generic Binding
> > +
> > +maintainers:
> > + - Andrew Lunn <andrew@lunn.ch>
> > + - Florian Fainelli <f.fainelli@gmail.com>
> > + - Heiner Kallweit <hkallweit1@gmail.com>
> > +
> > +description:
> > + These are generic properties that can apply to any MDIO bus. Any
> > + MDIO bus must have a list of child nodes, one per device on the
> > + bus. These should follow the generic ethernet-phy.yaml document, or
> > + a device specific binding document.
> > +
> > +properties:
> > + reset-gpios:
> > + maxItems: 1
> > + description:
> > + The phandle and specifier for the GPIO that controls the RESET
> > + lines of all PHYs on that MDIO bus.
> > +
> > + reset-delay-us:
> > + description:
> > + RESET pulse width in microseconds. It applies to all PHY devices
> > + and must therefore be appropriately determined based on all PHY
> > + requirements (maximum value of all per-PHY RESET pulse widths).
> > +
> > +examples:
> > + - |
> > + davinci_mdio: mdio@5c030000 {
>
> Can we enforce nodename to be mdio? That may not work for muxes.
> You'll probably have to implement it and see.
Ok, I'll send a follow-up patch for this.
> > + compatible = "ti,davinci_mdio";
> > + reg = <0x5c030000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> These 2 should have a schema.
Indeed, I'll do it for that too.
> > +
> > + reset-gpios = <&gpio2 5 1>;
> > + reset-delay-us = <2>;
> > +
> > + ethphy0: ethernet-phy@1 {
> > + reg = <1>;
>
> Need a child node schema to validate the unit-address and reg property.
This should be already covered by the ethernet-phy.yaml schemas
earlier in this series.
Were you expecting something else?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 15:57 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:57 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
[-- Attachment #1: Type: text/plain, Size: 3038 bytes --]
Hi Rob,
On Thu, Jun 27, 2019 at 09:48:06AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > The MDIO buses have a number of available device tree properties that can
> > be used in their device tree node. Add a YAML schemas for those.
> >
> > Suggested-by: Andrew Lunn <andrew@lunn.ch>
> > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> > Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> > 2 files changed, 52 insertions(+), 37 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> However, some comments for a follow-up...
>
> > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> > new file mode 100644
> > index 000000000000..b8fa8251c4bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> > @@ -0,0 +1,51 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/mdio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MDIO Bus Generic Binding
> > +
> > +maintainers:
> > + - Andrew Lunn <andrew@lunn.ch>
> > + - Florian Fainelli <f.fainelli@gmail.com>
> > + - Heiner Kallweit <hkallweit1@gmail.com>
> > +
> > +description:
> > + These are generic properties that can apply to any MDIO bus. Any
> > + MDIO bus must have a list of child nodes, one per device on the
> > + bus. These should follow the generic ethernet-phy.yaml document, or
> > + a device specific binding document.
> > +
> > +properties:
> > + reset-gpios:
> > + maxItems: 1
> > + description:
> > + The phandle and specifier for the GPIO that controls the RESET
> > + lines of all PHYs on that MDIO bus.
> > +
> > + reset-delay-us:
> > + description:
> > + RESET pulse width in microseconds. It applies to all PHY devices
> > + and must therefore be appropriately determined based on all PHY
> > + requirements (maximum value of all per-PHY RESET pulse widths).
> > +
> > +examples:
> > + - |
> > + davinci_mdio: mdio@5c030000 {
>
> Can we enforce nodename to be mdio? That may not work for muxes.
> You'll probably have to implement it and see.
Ok, I'll send a follow-up patch for this.
> > + compatible = "ti,davinci_mdio";
> > + reg = <0x5c030000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> These 2 should have a schema.
Indeed, I'll do it for that too.
> > +
> > + reset-gpios = <&gpio2 5 1>;
> > + reset-delay-us = <2>;
> > +
> > + ethphy0: ethernet-phy@1 {
> > + reg = <1>;
>
> Need a child node schema to validate the unit-address and reg property.
This should be already covered by the ethernet-phy.yaml schemas
earlier in this series.
Were you expecting something else?
Maxime
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 15:57 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-27 15:57 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
[-- Attachment #1.1: Type: text/plain, Size: 3124 bytes --]
Hi Rob,
On Thu, Jun 27, 2019 at 09:48:06AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > The MDIO buses have a number of available device tree properties that can
> > be used in their device tree node. Add a YAML schemas for those.
> >
> > Suggested-by: Andrew Lunn <andrew@lunn.ch>
> > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> > Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> > 2 files changed, 52 insertions(+), 37 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> However, some comments for a follow-up...
>
> > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> > new file mode 100644
> > index 000000000000..b8fa8251c4bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> > @@ -0,0 +1,51 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/mdio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MDIO Bus Generic Binding
> > +
> > +maintainers:
> > + - Andrew Lunn <andrew@lunn.ch>
> > + - Florian Fainelli <f.fainelli@gmail.com>
> > + - Heiner Kallweit <hkallweit1@gmail.com>
> > +
> > +description:
> > + These are generic properties that can apply to any MDIO bus. Any
> > + MDIO bus must have a list of child nodes, one per device on the
> > + bus. These should follow the generic ethernet-phy.yaml document, or
> > + a device specific binding document.
> > +
> > +properties:
> > + reset-gpios:
> > + maxItems: 1
> > + description:
> > + The phandle and specifier for the GPIO that controls the RESET
> > + lines of all PHYs on that MDIO bus.
> > +
> > + reset-delay-us:
> > + description:
> > + RESET pulse width in microseconds. It applies to all PHY devices
> > + and must therefore be appropriately determined based on all PHY
> > + requirements (maximum value of all per-PHY RESET pulse widths).
> > +
> > +examples:
> > + - |
> > + davinci_mdio: mdio@5c030000 {
>
> Can we enforce nodename to be mdio? That may not work for muxes.
> You'll probably have to implement it and see.
Ok, I'll send a follow-up patch for this.
> > + compatible = "ti,davinci_mdio";
> > + reg = <0x5c030000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> These 2 should have a schema.
Indeed, I'll do it for that too.
> > +
> > + reset-gpios = <&gpio2 5 1>;
> > + reset-delay-us = <2>;
> > +
> > + ethphy0: ethernet-phy@1 {
> > + reg = <1>;
>
> Need a child node schema to validate the unit-address and reg property.
This should be already covered by the ethernet-phy.yaml schemas
earlier in this series.
Were you expecting something else?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 15:57 ` Maxime Ripard
@ 2019-06-27 16:06 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 16:06 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> Hi Rob,
>
> On Thu, Jun 27, 2019 at 09:48:06AM -0600, Rob Herring wrote:
> > On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > The MDIO buses have a number of available device tree properties that can
> > > be used in their device tree node. Add a YAML schemas for those.
> > >
> > > Suggested-by: Andrew Lunn <andrew@lunn.ch>
> > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > > ---
> > > Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> > > Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> > > 2 files changed, 52 insertions(+), 37 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > However, some comments for a follow-up...
> >
> > > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> > > new file mode 100644
> > > index 000000000000..b8fa8251c4bc
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> > > @@ -0,0 +1,51 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/mdio.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MDIO Bus Generic Binding
> > > +
> > > +maintainers:
> > > + - Andrew Lunn <andrew@lunn.ch>
> > > + - Florian Fainelli <f.fainelli@gmail.com>
> > > + - Heiner Kallweit <hkallweit1@gmail.com>
> > > +
> > > +description:
> > > + These are generic properties that can apply to any MDIO bus. Any
> > > + MDIO bus must have a list of child nodes, one per device on the
> > > + bus. These should follow the generic ethernet-phy.yaml document, or
> > > + a device specific binding document.
> > > +
> > > +properties:
> > > + reset-gpios:
> > > + maxItems: 1
> > > + description:
> > > + The phandle and specifier for the GPIO that controls the RESET
> > > + lines of all PHYs on that MDIO bus.
> > > +
> > > + reset-delay-us:
> > > + description:
> > > + RESET pulse width in microseconds. It applies to all PHY devices
> > > + and must therefore be appropriately determined based on all PHY
> > > + requirements (maximum value of all per-PHY RESET pulse widths).
> > > +
> > > +examples:
> > > + - |
> > > + davinci_mdio: mdio@5c030000 {
> >
> > Can we enforce nodename to be mdio? That may not work for muxes.
> > You'll probably have to implement it and see.
>
> Ok, I'll send a follow-up patch for this.
>
> > > + compatible = "ti,davinci_mdio";
> > > + reg = <0x5c030000 0x1000>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> >
> > These 2 should have a schema.
>
> Indeed, I'll do it for that too.
>
> > > +
> > > + reset-gpios = <&gpio2 5 1>;
> > > + reset-delay-us = <2>;
> > > +
> > > + ethphy0: ethernet-phy@1 {
> > > + reg = <1>;
> >
> > Need a child node schema to validate the unit-address and reg property.
>
> This should be already covered by the ethernet-phy.yaml schemas
> earlier in this series.
Partially, yes.
> Were you expecting something else?
That would not prevent having a child node such as 'foo {};' or
'foo@bad {};'. It would also not check valid nodes named something
other than 'ethernet-phy'.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-27 16:06 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 16:06 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> Hi Rob,
>
> On Thu, Jun 27, 2019 at 09:48:06AM -0600, Rob Herring wrote:
> > On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > The MDIO buses have a number of available device tree properties that can
> > > be used in their device tree node. Add a YAML schemas for those.
> > >
> > > Suggested-by: Andrew Lunn <andrew@lunn.ch>
> > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > > ---
> > > Documentation/devicetree/bindings/net/mdio.txt | 38 +-------------
> > > Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++-
> > > 2 files changed, 52 insertions(+), 37 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > However, some comments for a follow-up...
> >
> > > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> > > new file mode 100644
> > > index 000000000000..b8fa8251c4bc
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> > > @@ -0,0 +1,51 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/mdio.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MDIO Bus Generic Binding
> > > +
> > > +maintainers:
> > > + - Andrew Lunn <andrew@lunn.ch>
> > > + - Florian Fainelli <f.fainelli@gmail.com>
> > > + - Heiner Kallweit <hkallweit1@gmail.com>
> > > +
> > > +description:
> > > + These are generic properties that can apply to any MDIO bus. Any
> > > + MDIO bus must have a list of child nodes, one per device on the
> > > + bus. These should follow the generic ethernet-phy.yaml document, or
> > > + a device specific binding document.
> > > +
> > > +properties:
> > > + reset-gpios:
> > > + maxItems: 1
> > > + description:
> > > + The phandle and specifier for the GPIO that controls the RESET
> > > + lines of all PHYs on that MDIO bus.
> > > +
> > > + reset-delay-us:
> > > + description:
> > > + RESET pulse width in microseconds. It applies to all PHY devices
> > > + and must therefore be appropriately determined based on all PHY
> > > + requirements (maximum value of all per-PHY RESET pulse widths).
> > > +
> > > +examples:
> > > + - |
> > > + davinci_mdio: mdio@5c030000 {
> >
> > Can we enforce nodename to be mdio? That may not work for muxes.
> > You'll probably have to implement it and see.
>
> Ok, I'll send a follow-up patch for this.
>
> > > + compatible = "ti,davinci_mdio";
> > > + reg = <0x5c030000 0x1000>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> >
> > These 2 should have a schema.
>
> Indeed, I'll do it for that too.
>
> > > +
> > > + reset-gpios = <&gpio2 5 1>;
> > > + reset-delay-us = <2>;
> > > +
> > > + ethphy0: ethernet-phy@1 {
> > > + reg = <1>;
> >
> > Need a child node schema to validate the unit-address and reg property.
>
> This should be already covered by the ethernet-phy.yaml schemas
> earlier in this series.
Partially, yes.
> Were you expecting something else?
That would not prevent having a child node such as 'foo {};' or
'foo@bad {};'. It would also not check valid nodes named something
other than 'ethernet-phy'.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-27 17:22 ` David Miller
-1 siblings, 0 replies; 57+ messages in thread
From: David Miller @ 2019-06-27 17:22 UTC (permalink / raw)
To: maxime.ripard
Cc: mark.rutland, robh+dt, frowand.list, wens, mcoquelin.stm32,
alexandre.torgue, netdev, linux-arm-kernel, devicetree,
linux-stm32, maxime.chevallier, antoine.tenart, andrew,
f.fainelli, hkallweit1
From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Thu, 27 Jun 2019 17:31:42 +0200
> This is an attempt at getting the main generic DT bindings for the ethernet
> (and related) devices, and convert some DT bindings for the Allwinner DTs
> to YAML as well.
>
> This should provide some DT validation coverage.
I don't think this should go via my tree as it's all DT stuff.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
@ 2019-06-27 17:22 ` David Miller
0 siblings, 0 replies; 57+ messages in thread
From: David Miller @ 2019-06-27 17:22 UTC (permalink / raw)
To: maxime.ripard
Cc: mark.rutland, devicetree, f.fainelli, alexandre.torgue, andrew,
antoine.tenart, netdev, maxime.chevallier, wens, robh+dt,
mcoquelin.stm32, frowand.list, linux-stm32, linux-arm-kernel,
hkallweit1
From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Thu, 27 Jun 2019 17:31:42 +0200
> This is an attempt at getting the main generic DT bindings for the ethernet
> (and related) devices, and convert some DT bindings for the Allwinner DTs
> to YAML as well.
>
> This should provide some DT validation coverage.
I don't think this should go via my tree as it's all DT stuff.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
2019-06-27 17:22 ` David Miller
(?)
@ 2019-06-27 19:17 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 19:17 UTC (permalink / raw)
To: David Miller
Cc: Maxime Ripard, Mark Rutland, Frank Rowand, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Tenart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 11:22 AM David Miller <davem@davemloft.net> wrote:
>
> From: Maxime Ripard <maxime.ripard@bootlin.com>
> Date: Thu, 27 Jun 2019 17:31:42 +0200
>
> > This is an attempt at getting the main generic DT bindings for the ethernet
> > (and related) devices, and convert some DT bindings for the Allwinner DTs
> > to YAML as well.
> >
> > This should provide some DT validation coverage.
>
> I don't think this should go via my tree as it's all DT stuff.
That's fine. I can take it. There's one conflict with commit
79b647a0c0d5 ("dt-bindings: net: document new usxgmii phy mode"), but
that's easy enough to handle. Any other changes to the binding docs
will need to go thru me this cycle.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
@ 2019-06-27 19:17 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 19:17 UTC (permalink / raw)
To: David Miller
Cc: Maxime Ripard, Mark Rutland, Frank Rowand, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Tenart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 11:22 AM David Miller <davem@davemloft.net> wrote:
>
> From: Maxime Ripard <maxime.ripard@bootlin.com>
> Date: Thu, 27 Jun 2019 17:31:42 +0200
>
> > This is an attempt at getting the main generic DT bindings for the ethernet
> > (and related) devices, and convert some DT bindings for the Allwinner DTs
> > to YAML as well.
> >
> > This should provide some DT validation coverage.
>
> I don't think this should go via my tree as it's all DT stuff.
That's fine. I can take it. There's one conflict with commit
79b647a0c0d5 ("dt-bindings: net: document new usxgmii phy mode"), but
that's easy enough to handle. Any other changes to the binding docs
will need to go thru me this cycle.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings
@ 2019-06-27 19:17 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-27 19:17 UTC (permalink / raw)
To: David Miller
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Maxime Ripard, netdev, Maxime Chevallier,
Antoine Tenart, Chen-Yu Tsai, Maxime Coquelin, Frank Rowand,
linux-stm32,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
On Thu, Jun 27, 2019 at 11:22 AM David Miller <davem@davemloft.net> wrote:
>
> From: Maxime Ripard <maxime.ripard@bootlin.com>
> Date: Thu, 27 Jun 2019 17:31:42 +0200
>
> > This is an attempt at getting the main generic DT bindings for the ethernet
> > (and related) devices, and convert some DT bindings for the Allwinner DTs
> > to YAML as well.
> >
> > This should provide some DT validation coverage.
>
> I don't think this should go via my tree as it's all DT stuff.
That's fine. I can take it. There's one conflict with commit
79b647a0c0d5 ("dt-bindings: net: document new usxgmii phy mode"), but
that's easy enough to handle. Any other changes to the binding docs
will need to go thru me this cycle.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 02/13] dt-bindings: net: Add a YAML schemas for the generic PHY options
2019-06-27 15:31 ` Maxime Ripard
@ 2019-06-28 1:16 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-28 1:16 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The networking PHYs have a number of available device tree properties that
> can be used in their device tree node. Add a YAML schemas for those.
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> Documentation/devicetree/bindings/net/ethernet-phy.yaml | 179 +++++++++-
> Documentation/devicetree/bindings/net/phy.txt | 80 +----
> 2 files changed, 180 insertions(+), 79 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> new file mode 100644
> index 000000000000..81d2016d7232
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ethernet PHY Generic Binding
> +
> +maintainers:
> + - Andrew Lunn <andrew@lunn.ch>
> + - Florian Fainelli <f.fainelli@gmail.com>
> + - Heiner Kallweit <hkallweit1@gmail.com>
> +
> +# The dt-schema tools will generate a select statement first by using
> +# the compatible, and second by using the node name if any. In our
> +# case, the node name is the one we want to match on, while the
> +# compatible is optional.
> +select:
> + properties:
> + $nodename:
> + pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> +
> + required:
> + - $nodename
> +
> +properties:
> + $nodename:
> + pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> +
> + compatible:
> + oneOf:
> + - const: ethernet-phy-ieee802.3-c22
> + description: PHYs that implement IEEE802.3 clause 22
> + - const: ethernet-phy-ieee802.3-c45
> + description: PHYs that implement IEEE802.3 clause 45
> + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> + description:
> + If the PHY reports an incorrect ID (or none at all) then the
> + compatible list may contain an entry with the correct PHY ID
> + in the above form.
> + The first group of digits is the 16 bit Phy Identifier 1
> + register, this is the chip vendor OUI bits 3:18. The
> + second group of digits is the Phy Identifier 2 register,
> + this is the chip vendor OUI bits 19:24, followed by 10
> + bits of a vendor specific ID.
> + - items:
> + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> + - const: ethernet-phy-ieee802.3-c45
> +
> + reg:
> + maxItems: 1
> + minimum: 0
> + maximum: 31
> + description:
> + The ID number for the PHY.
Mixing array and scalar properties is something we shouldn't be doing,
so I dropped maxItems as that is implied. I have a meta-schema check
for this once a couple of occurrences are fixed in the tree.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 02/13] dt-bindings: net: Add a YAML schemas for the generic PHY options
@ 2019-06-28 1:16 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-28 1:16 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
On Thu, Jun 27, 2019 at 9:32 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The networking PHYs have a number of available device tree properties that
> can be used in their device tree node. Add a YAML schemas for those.
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> Documentation/devicetree/bindings/net/ethernet-phy.yaml | 179 +++++++++-
> Documentation/devicetree/bindings/net/phy.txt | 80 +----
> 2 files changed, 180 insertions(+), 79 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> new file mode 100644
> index 000000000000..81d2016d7232
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ethernet PHY Generic Binding
> +
> +maintainers:
> + - Andrew Lunn <andrew@lunn.ch>
> + - Florian Fainelli <f.fainelli@gmail.com>
> + - Heiner Kallweit <hkallweit1@gmail.com>
> +
> +# The dt-schema tools will generate a select statement first by using
> +# the compatible, and second by using the node name if any. In our
> +# case, the node name is the one we want to match on, while the
> +# compatible is optional.
> +select:
> + properties:
> + $nodename:
> + pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> +
> + required:
> + - $nodename
> +
> +properties:
> + $nodename:
> + pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> +
> + compatible:
> + oneOf:
> + - const: ethernet-phy-ieee802.3-c22
> + description: PHYs that implement IEEE802.3 clause 22
> + - const: ethernet-phy-ieee802.3-c45
> + description: PHYs that implement IEEE802.3 clause 45
> + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> + description:
> + If the PHY reports an incorrect ID (or none at all) then the
> + compatible list may contain an entry with the correct PHY ID
> + in the above form.
> + The first group of digits is the 16 bit Phy Identifier 1
> + register, this is the chip vendor OUI bits 3:18. The
> + second group of digits is the Phy Identifier 2 register,
> + this is the chip vendor OUI bits 19:24, followed by 10
> + bits of a vendor specific ID.
> + - items:
> + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> + - const: ethernet-phy-ieee802.3-c45
> +
> + reg:
> + maxItems: 1
> + minimum: 0
> + maximum: 31
> + description:
> + The ID number for the PHY.
Mixing array and scalar properties is something we shouldn't be doing,
so I dropped maxItems as that is implied. I have a meta-schema check
for this once a couple of occurrences are fixed in the tree.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-27 16:06 ` Rob Herring
(?)
@ 2019-06-28 13:45 ` Maxime Ripard
-1 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-28 13:45 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
[-- Attachment #1: Type: text/plain, Size: 1042 bytes --]
On Thu, Jun 27, 2019 at 10:06:57AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > +
> > > > + reset-gpios = <&gpio2 5 1>;
> > > > + reset-delay-us = <2>;
> > > > +
> > > > + ethphy0: ethernet-phy@1 {
> > > > + reg = <1>;
> > >
> > > Need a child node schema to validate the unit-address and reg property.
> >
> > This should be already covered by the ethernet-phy.yaml schemas
> > earlier in this series.
>
> Partially, yes.
>
> > Were you expecting something else?
>
> That would not prevent having a child node such as 'foo {};' or
> 'foo@bad {};'. It would also not check valid nodes named something
> other than 'ethernet-phy'.
Right, but listing the nodes won't either, since we can't enable
additionalProperties in that schema. So any node that wouldn't match
ethernet-phy@.* wouldn't be validated, but wouldn't generate a warning
either.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-28 13:45 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-28 13:45 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
[-- Attachment #1: Type: text/plain, Size: 956 bytes --]
On Thu, Jun 27, 2019 at 10:06:57AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > +
> > > > + reset-gpios = <&gpio2 5 1>;
> > > > + reset-delay-us = <2>;
> > > > +
> > > > + ethphy0: ethernet-phy@1 {
> > > > + reg = <1>;
> > >
> > > Need a child node schema to validate the unit-address and reg property.
> >
> > This should be already covered by the ethernet-phy.yaml schemas
> > earlier in this series.
>
> Partially, yes.
>
> > Were you expecting something else?
>
> That would not prevent having a child node such as 'foo {};' or
> 'foo@bad {};'. It would also not check valid nodes named something
> other than 'ethernet-phy'.
Right, but listing the nodes won't either, since we can't enable
additionalProperties in that schema. So any node that wouldn't match
ethernet-phy@.* wouldn't be validated, but wouldn't generate a warning
either.
Maxime
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-28 13:45 ` Maxime Ripard
0 siblings, 0 replies; 57+ messages in thread
From: Maxime Ripard @ 2019-06-28 13:45 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
[-- Attachment #1.1: Type: text/plain, Size: 1042 bytes --]
On Thu, Jun 27, 2019 at 10:06:57AM -0600, Rob Herring wrote:
> On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > +
> > > > + reset-gpios = <&gpio2 5 1>;
> > > > + reset-delay-us = <2>;
> > > > +
> > > > + ethphy0: ethernet-phy@1 {
> > > > + reg = <1>;
> > >
> > > Need a child node schema to validate the unit-address and reg property.
> >
> > This should be already covered by the ethernet-phy.yaml schemas
> > earlier in this series.
>
> Partially, yes.
>
> > Were you expecting something else?
>
> That would not prevent having a child node such as 'foo {};' or
> 'foo@bad {};'. It would also not check valid nodes named something
> other than 'ethernet-phy'.
Right, but listing the nodes won't either, since we can't enable
additionalProperties in that schema. So any node that wouldn't match
ethernet-phy@.* wouldn't be validated, but wouldn't generate a warning
either.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
2019-06-28 13:45 ` Maxime Ripard
@ 2019-06-28 18:17 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-28 18:17 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Frank Rowand, David S . Miller, Chen-Yu Tsai,
Maxime Coquelin, Alexandre Torgue, netdev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Fri, Jun 28, 2019 at 7:46 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Thu, Jun 27, 2019 at 10:06:57AM -0600, Rob Herring wrote:
> > On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > > +
> > > > > + reset-gpios = <&gpio2 5 1>;
> > > > > + reset-delay-us = <2>;
> > > > > +
> > > > > + ethphy0: ethernet-phy@1 {
> > > > > + reg = <1>;
> > > >
> > > > Need a child node schema to validate the unit-address and reg property.
> > >
> > > This should be already covered by the ethernet-phy.yaml schemas
> > > earlier in this series.
> >
> > Partially, yes.
> >
> > > Were you expecting something else?
> >
> > That would not prevent having a child node such as 'foo {};' or
> > 'foo@bad {};'. It would also not check valid nodes named something
> > other than 'ethernet-phy'.
>
> Right, but listing the nodes won't either, since we can't enable
> additionalProperties in that schema. So any node that wouldn't match
> ethernet-phy@.* wouldn't be validated, but wouldn't generate a warning
> either.
Perhaps I wasn't clear, but it was missing or incorrect 'reg' property
and unit-address format checks that I was thinking about. Just like we
have for SPI.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options
@ 2019-06-28 18:17 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2019-06-28 18:17 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Chen-Yu Tsai, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Heiner Kallweit
On Fri, Jun 28, 2019 at 7:46 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Thu, Jun 27, 2019 at 10:06:57AM -0600, Rob Herring wrote:
> > On Thu, Jun 27, 2019 at 9:57 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > > +
> > > > > + reset-gpios = <&gpio2 5 1>;
> > > > > + reset-delay-us = <2>;
> > > > > +
> > > > > + ethphy0: ethernet-phy@1 {
> > > > > + reg = <1>;
> > > >
> > > > Need a child node schema to validate the unit-address and reg property.
> > >
> > > This should be already covered by the ethernet-phy.yaml schemas
> > > earlier in this series.
> >
> > Partially, yes.
> >
> > > Were you expecting something else?
> >
> > That would not prevent having a child node such as 'foo {};' or
> > 'foo@bad {};'. It would also not check valid nodes named something
> > other than 'ethernet-phy'.
>
> Right, but listing the nodes won't either, since we can't enable
> additionalProperties in that schema. So any node that wouldn't match
> ethernet-phy@.* wouldn't be validated, but wouldn't generate a warning
> either.
Perhaps I wasn't clear, but it was missing or incorrect 'reg' property
and unit-address format checks that I was thinking about. Just like we
have for SPI.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
2019-06-27 15:31 ` Maxime Ripard
@ 2019-07-30 3:51 ` Chen-Yu Tsai
-1 siblings, 0 replies; 57+ messages in thread
From: Chen-Yu Tsai @ 2019-07-30 3:51 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, Rob Herring, Frank Rowand, David S . Miller,
Maxime Coquelin, Alexandre Torgue, netdev, linux-arm-kernel,
devicetree, linux-stm32, Maxime Chevallier, Antoine Ténart,
Andrew Lunn, Florian Fainelli, Heiner Kallweit
On Thu, Jun 27, 2019 at 11:32 PM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> The phy device tree property has been deprecated in favor of phy-handle,
> let's replace it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch breaks Ethernet on all my dwmac-sunxi, i.e. old GMAC, boards, with
the following error messages:
sun7i-dwmac 1c50000.ethernet eth0: no phy at addr -1
sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Cannot attach to
PHY (error: -19)
Reverting this patch fixes it.
It also breaks the A10/A10s, but that's probably because the sun4i-emac
driver doesn't recognize the "phy-handle" property.
ChenYu
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle
@ 2019-07-30 3:51 ` Chen-Yu Tsai
0 siblings, 0 replies; 57+ messages in thread
From: Chen-Yu Tsai @ 2019-07-30 3:51 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Florian Fainelli, Alexandre Torgue,
Andrew Lunn, Antoine Ténart, netdev, linux-stm32,
Rob Herring, Maxime Coquelin, Maxime Chevallier, Frank Rowand,
David S . Miller, linux-arm-kernel, Heiner Kallweit
On Thu, Jun 27, 2019 at 11:32 PM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> The phy device tree property has been deprecated in favor of phy-handle,
> let's replace it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch breaks Ethernet on all my dwmac-sunxi, i.e. old GMAC, boards, with
the following error messages:
sun7i-dwmac 1c50000.ethernet eth0: no phy at addr -1
sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Cannot attach to
PHY (error: -19)
Reverting this patch fixes it.
It also breaks the A10/A10s, but that's probably because the sun4i-emac
driver doesn't recognize the "phy-handle" property.
ChenYu
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2019-07-30 3:51 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 15:31 [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 01/13] dt-bindings: net: Add YAML schemas for the generic Ethernet options Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:37 ` Andrew Lunn
2019-06-27 15:37 ` Andrew Lunn
2019-06-27 15:31 ` [PATCH v4 02/13] dt-bindings: net: Add a YAML schemas for the generic PHY options Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-28 1:16 ` Rob Herring
2019-06-28 1:16 ` Rob Herring
2019-06-27 15:31 ` [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:39 ` Andrew Lunn
2019-06-27 15:39 ` Andrew Lunn
2019-06-27 15:48 ` Rob Herring
2019-06-27 15:48 ` Rob Herring
2019-06-27 15:57 ` Maxime Ripard
2019-06-27 15:57 ` Maxime Ripard
2019-06-27 15:57 ` Maxime Ripard
2019-06-27 16:06 ` Rob Herring
2019-06-27 16:06 ` Rob Herring
2019-06-28 13:45 ` Maxime Ripard
2019-06-28 13:45 ` Maxime Ripard
2019-06-28 13:45 ` Maxime Ripard
2019-06-28 18:17 ` Rob Herring
2019-06-28 18:17 ` Rob Herring
2019-06-27 15:31 ` [PATCH v4 04/13] MAINTAINERS: Add Ethernet PHY YAML file Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 05/13] dt-bindings: net: phy: The interrupt property is not mandatory Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 06/13] dt-bindings: net: sun4i-emac: Convert the binding to a schemas Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 07/13] dt-bindings: net: sun4i-mdio: " Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 08/13] dt-bindings: net: stmmac: " Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 09/13] dt-bindings: net: sun7i-gmac: " Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 10/13] dt-bindings: net: sun8i-emac: " Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 11/13] dt-bindings: net: dwmac: Deprecate the PHY reset properties Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:40 ` Andrew Lunn
2019-06-27 15:40 ` Andrew Lunn
2019-06-27 15:31 ` [PATCH v4 12/13] ARM: dts: sunxi: Switch to the generic PHY properties Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:31 ` [PATCH v4 13/13] ARM: dts: sunxi: Switch from phy to phy-handle Maxime Ripard
2019-06-27 15:31 ` Maxime Ripard
2019-06-27 15:41 ` Andrew Lunn
2019-06-27 15:41 ` Andrew Lunn
2019-07-30 3:51 ` Chen-Yu Tsai
2019-07-30 3:51 ` Chen-Yu Tsai
2019-06-27 17:22 ` [PATCH v4 00/13] net: Add generic and Allwinner YAML bindings David Miller
2019-06-27 17:22 ` David Miller
2019-06-27 19:17 ` Rob Herring
2019-06-27 19:17 ` Rob Herring
2019-06-27 19:17 ` Rob Herring
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.