* Please pull u-boot-net/next
@ 2021-11-03 9:13 Ramon Fried
0 siblings, 0 replies; 16+ messages in thread
From: Ramon Fried @ 2021-11-03 9:13 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
Hi Tom,
This PR includes the following net changes for next:
- Various DSA additions
- bootp: fix for VCI string
- tsec: support for promiscuous mode
- macb: Fix for random MAC address not saved to the environment.
The following changes since commit aafc378a6caef453a40f2f9f3d6bef69e592c28d:
Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
(2021-10-28 07:57:54 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/
for you to fetch changes up to 373a96001df2efd84c8d2eecfa31971fa43a066a:
net: uclass: Save ethernet MAC address when generated (2021-11-03
09:06:15 +0200)
----------------------------------------------------------------
Bin Meng (3):
net: dsa: Use true instead of 1 in the set_promisc() call
net: fec_mxc: Declare 'promisc' as bool
net: tsec: Make redundant_init() static
Michal Simek (1):
net: uclass: Save ethernet MAC address when generated
Peter Hoyes (1):
cmd: pxe_utils: Check fdtcontroladdr in label_boot
Samuel Holland (1):
net: phy: realtek: Add tx/rx delay config for 8211e
Vladimir Oltean (11):
net: phy: mscc: add support for VSC8502 in dual RGMII mode
net: tsec: add support for promiscuous mode
include: import if_vlan.h from Linux
net: dsa: allow drivers to get the port OF node
net: introduce a helper to determine whether to use in-band autoneg
net: dsa: felix: configure the in-band autoneg property based on
OF node info
net: dsa: add driver for NXP SJA1105 L2 switch
net: dsa: sja1105: add support for SGMII
arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings
configs: ls1021a-tsn: enable sja1105 switch driver
configs: ls1021a-tsn: enable the generation of random Ethernet
MAC addresses
Walter Stoll (1):
net: bootp: Correct VCI string transmission
arch/arm/dts/ls1021a-tsn.dts | 103 +
cmd/pxe_utils.c | 8 +-
configs/ls1021atsn_qspi_defconfig | 3 +
configs/ls1021atsn_sdcard_defconfig | 3 +
configs/pine64_plus_defconfig | 1 -
drivers/core/of_extra.c | 12 +
drivers/net/Kconfig | 16 +
drivers/net/Makefile | 1 +
drivers/net/fec_mxc.h | 2 +-
drivers/net/mscc_eswitch/felix_switch.c | 10 +-
drivers/net/phy/Kconfig | 10 -
drivers/net/phy/mscc.c | 56 +
drivers/net/phy/realtek.c | 69 +-
drivers/net/sja1105.c | 3376 +++++++++++++++++++++++++++++++
drivers/net/tsec.c | 22 +-
include/dm/of_extra.h | 14 +
include/linux/if_vlan.h | 26 +
include/net/dsa.h | 12 +
include/tsec.h | 2 +
net/bootp.c | 2 +-
net/dsa-uclass.c | 22 +-
net/eth-uclass.c | 2 +
22 files changed, 3720 insertions(+), 52 deletions(-)
create mode 100644 drivers/net/sja1105.c
create mode 100644 include/linux/if_vlan.h
Thanks,
Ramon.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2022-04-13 15:10 Ramon Fried
2022-04-13 22:57 ` Tom Rini
@ 2022-04-15 15:47 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2022-04-15 15:47 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 860 bytes --]
On Wed, Apr 13, 2022 at 06:10:40PM +0300, Ramon Fried wrote:
> Hi Tom,
> Please pull the latest changes from u-boot-net/next branch which include:
>
> * DM9000 DM support
> * tftp server bug fix
> * mdio ofnode support functions
> * Various phy fixes and improvements.
>
> The following changes since commit 8221c52d88fbe84ca9692dc23827e21403c952e8:
>
> Merge tag 'u-boot-at91-2022.07-a' of
> https://source.denx.de/u-boot/custodians/u-boot-at91 into next
> (2022-04-04 08:26:55 -0400)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/next
>
> for you to fetch changes up to 0154e6de37e8bbaac837939391f6d4a8f0b3fd18:
>
> configs: net: dm9000: Move new Kconfig option to board configs
> (2022-04-13 15:14:31 +0300)
>
Applied to u-boot/master, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2022-04-13 15:10 Ramon Fried
@ 2022-04-13 22:57 ` Tom Rini
2022-04-15 15:47 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2022-04-13 22:57 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 1098 bytes --]
On Wed, Apr 13, 2022 at 06:10:40PM +0300, Ramon Fried wrote:
> Hi Tom,
> Please pull the latest changes from u-boot-net/next branch which include:
>
> * DM9000 DM support
> * tftp server bug fix
> * mdio ofnode support functions
> * Various phy fixes and improvements.
>
> The following changes since commit 8221c52d88fbe84ca9692dc23827e21403c952e8:
>
> Merge tag 'u-boot-at91-2022.07-a' of
> https://source.denx.de/u-boot/custodians/u-boot-at91 into next
> (2022-04-04 08:26:55 -0400)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/next
>
> for you to fetch changes up to 0154e6de37e8bbaac837939391f6d4a8f0b3fd18:
>
> configs: net: dm9000: Move new Kconfig option to board configs
> (2022-04-13 15:14:31 +0300)
>
To follow-up to myself from
https://patchwork.ozlabs.org/project/uboot/patch/20220406223308.9833-4-kabel@kernel.org/
this doesn't pass CI currently, after I fixed the merge conflicts. It's
possible I did that wrong, or something else is now being exposed in
sandbox.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Please pull u-boot-net/next
@ 2022-04-13 15:10 Ramon Fried
2022-04-13 22:57 ` Tom Rini
2022-04-15 15:47 ` Tom Rini
0 siblings, 2 replies; 16+ messages in thread
From: Ramon Fried @ 2022-04-13 15:10 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
Hi Tom,
Please pull the latest changes from u-boot-net/next branch which include:
* DM9000 DM support
* tftp server bug fix
* mdio ofnode support functions
* Various phy fixes and improvements.
The following changes since commit 8221c52d88fbe84ca9692dc23827e21403c952e8:
Merge tag 'u-boot-at91-2022.07-a' of
https://source.denx.de/u-boot/custodians/u-boot-at91 into next
(2022-04-04 08:26:55 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/next
for you to fetch changes up to 0154e6de37e8bbaac837939391f6d4a8f0b3fd18:
configs: net: dm9000: Move new Kconfig option to board configs
(2022-04-13 15:14:31 +0300)
----------------------------------------------------------------
Arjan Minzinga Zijlstra (1):
net: tftp: fix tftp server initialization
Haolin Li (1):
net: phy: dp83867: Fix a never true comparison
Marek Behún (17):
net: mdio-uclass: fix type for phy_mode_str and phy_handle_str
net: mdio-uclass: use ARRAY_SIZE()
net: introduce helpers to get PHY ofnode from MAC
net: mdio-uclass: add wrappers for read/write/reset operations
treewide: use dm_mdio_read/write/reset() wrappers
net: phy: fix parsing wrong property
net: introduce helpers to get PHY interface mode from a device/ofnode
treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA
phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition
net: phy: xilinx: Check interface type in ->config(), not ->probe()
net: phy: use ->is_c45 instead of is_10g_interface()
bcmgenet, sun8i_emac: Don't connect PHY two times
net: phy: don't require PHY interface mode during PHY creation
driver: net: ti: keystone_net: Deduplicate code
driver: net: ti: keystone_net: Convert to ofnode functions
driver: net: ti: keystone_net: Change priv member type
Marek Vasut (17):
net: dm9000: Make accessor names lowercase
net: dm9000: Replace DM9000_DBG() with debug()
net: dm9000: Make RxLen and RxStatus lowercase
net: dm9000: Drop unused dump_regs()
net: dm9000: Turn DM9000_DMP_PACKET() into a function
net: dm9000: Drop volatiles
net: dm9000: Checkpatch cleanup
net: dm9000: Reorder and staticize
net: dm9000: Rename board_info to dm9000_priv
net: dm9000: Drop static device private data
net: dm9000: Drop dm9000.h and staticize SROM access
net: dm9000: Pass private data around for IO
net: dm9000: Split non-DM specific bits from common code
net: dm9000: Receive one packet per recv call
net: dm9000: Add DM support
net: dm9000: Add Kconfig entry
configs: net: dm9000: Move new Kconfig option to board configs
Nate Drude (1):
phy: adin: add driver for Analog Devices ADIN1300 PHY
Tim Harvey (2):
net: fec: prevent undesired de-assertion of phy-reset on request
net: eth-phy: prevent undesired de-assertion of phy-reset on request
Vladimir Oltean (2):
net: phy: dp83867: avoid error in dp83867_of_init() when PHY has
no OF node
net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node
arch/sandbox/dts/test.dts | 14 ++++
board/CZ.NIC/turris_mox/turris_mox.c | 2 +-
board/boundary/nitrogen6x/nitrogen6x.c | 2 +-
board/freescale/corenet_ds/eth_hydra.c | 2 +-
board/freescale/corenet_ds/eth_superhydra.c | 4 +-
board/freescale/t104xrdb/eth.c | 4 +-
board/gdsys/a38x/controlcenterdc.c | 7 +-
board/gdsys/a38x/ihs_phys.c | 6 +-
board/st/stm32f746-disco/stm32f746-disco.c | 13 ++-
configs/M5253DEMO_defconfig | 1 +
configs/at91sam9261ek_dataflash_cs0_defconfig | 1 +
configs/at91sam9261ek_dataflash_cs3_defconfig | 1 +
configs/at91sam9261ek_nandflash_defconfig | 1 +
configs/ci20_mmc_defconfig | 1 +
configs/colibri_pxa270_defconfig | 1 +
configs/devkit8000_defconfig | 1 +
doc/device-tree-bindings/net/phy/adin.txt | 26 ++++++
drivers/core/ofnode.c | 44 ++++++++++
drivers/core/read.c | 10 +++
drivers/net/Kconfig | 5 ++
drivers/net/ag7xxx.c | 9 +-
drivers/net/altera_tse.c | 17 ++--
drivers/net/bcm6348-eth.c | 8 +-
drivers/net/bcmgenet.c | 12 +--
drivers/net/designware.c | 10 +--
drivers/net/dm9000x.c | 827
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------
drivers/net/dwc_eth_qos.c | 40 ++-------
drivers/net/eth-phy-uclass.c | 2 +-
drivers/net/ethoc.c | 4 +-
drivers/net/fec_mxc.c | 13 +--
drivers/net/fm/b4860.c | 8 +-
drivers/net/fm/eth.c | 13 +--
drivers/net/fm/init.c | 8 +-
drivers/net/fm/ls1043.c | 6 +-
drivers/net/fm/ls1046.c | 8 +-
drivers/net/fm/p1023.c | 4 +-
drivers/net/fm/p4080.c | 6 +-
drivers/net/fm/p5020.c | 6 +-
drivers/net/fm/p5040.c | 6 +-
drivers/net/fm/t1024.c | 4 +-
drivers/net/fm/t1040.c | 4 +-
drivers/net/fm/t2080.c | 6 +-
drivers/net/fm/t4240.c | 6 +-
drivers/net/fsl_enetc.c | 13 +--
drivers/net/ftgmac100.c | 11 +--
drivers/net/higmacv300.c | 9 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 28 ++-----
drivers/net/ldpaa_eth/ldpaa_wriop.c | 10 +--
drivers/net/ldpaa_eth/ls1088a.c | 4 +-
drivers/net/ldpaa_eth/ls2080a.c | 4 +-
drivers/net/ldpaa_eth/lx2160a.c | 4 +-
drivers/net/macb.c | 10 +--
drivers/net/mdio_mux_sandbox.c | 6 +-
drivers/net/mscc_eswitch/jr2_switch.c | 2 +-
drivers/net/mscc_eswitch/luton_switch.c | 2 +-
drivers/net/mscc_eswitch/ocelot_switch.c | 2 +-
drivers/net/mscc_eswitch/serval_switch.c | 2 +-
drivers/net/mscc_eswitch/servalt_switch.c | 2 +-
drivers/net/mt7620-eth.c | 45 ++++------
drivers/net/mtk_eth.c | 8 +-
drivers/net/mvgbe.c | 7 +-
drivers/net/mvneta.c | 11 +--
drivers/net/mvpp2.c | 9 +-
drivers/net/pch_gbe.c | 4 +-
drivers/net/phy/Kconfig | 5 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/adin.c | 228
++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/aquantia.c | 2 +-
drivers/net/phy/atheros.c | 2 +-
drivers/net/phy/dp83867.c | 9 +-
drivers/net/phy/ethernet_id.c | 5 +-
drivers/net/phy/phy.c | 120 ++++++++++----------------
drivers/net/phy/xilinx_gmii2rgmii.c | 14 ++--
drivers/net/pic32_eth.c | 11 +--
drivers/net/qe/dm_qe_uec.c | 11 +--
drivers/net/ravb.c | 19 ++---
drivers/net/sh_eth.c | 19 ++---
drivers/net/sni_ave.c | 16 ++--
drivers/net/sni_netsec.c | 10 +--
drivers/net/sun8i_emac.c | 13 +--
drivers/net/sunxi_emac.c | 5 +-
drivers/net/ti/am65-cpsw-nuss.c | 15 +---
drivers/net/ti/cpsw.c | 10 +--
drivers/net/ti/keystone_net.c | 194
+++++++++++++++++++-----------------------
drivers/net/tsec.c | 9 +-
drivers/net/xilinx_axi_emac.c | 10 +--
drivers/net/zynq_gem.c | 9 +-
include/_exports.h | 3 +-
include/configs/M5253DEMO.h | 1 -
include/configs/at91sam9261ek.h | 1 -
include/configs/ci20.h | 1 -
include/configs/colibri_pxa270.h | 1 -
include/configs/devkit8000.h | 1 -
include/dm/ofnode.h | 27 ++++++
include/dm/read.h | 36 ++++++++
include/dm9000.h | 16 ----
include/exports.h | 3 +-
include/fm_eth.h | 2 +-
include/miiphy.h | 31 +++++++
include/phy.h | 41 +++------
include/phy_interface.h | 11 ++-
include/vsc9953.h | 2 +-
net/mdio-mux-uclass.c | 16 +---
net/mdio-uclass.c | 96 ++++++++++-----------
net/tftp.c | 2 +
test/dm/mdio.c | 18 ++--
test/dm/mdio_mux.c | 16 ++--
test/dm/ofnode.c | 22 +++++
108 files changed, 1337 insertions(+), 1113 deletions(-)
create mode 100644 doc/device-tree-bindings/net/phy/adin.txt
create mode 100644 drivers/net/phy/adin.c
delete mode 100644 include/dm9000.h
Thanks,
Ramon
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2022-01-15 20:01 Ramon Fried
@ 2022-01-17 16:11 ` Tom Rini
0 siblings, 0 replies; 16+ messages in thread
From: Tom Rini @ 2022-01-17 16:11 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 849 bytes --]
On Sat, Jan 15, 2022 at 10:01:42PM +0200, Ramon Fried wrote:
> Hi Tom,
> Please pull the latest changes from u-boot-net/next branch which include:
> * PXE label override support
> * Fastboot UDP configurable port
> * new phy driver: TI DP83869HM
> * and few minor fixes to dsa.
>
> The following changes since commit 0dadad6d7c5769d6258baeaf1b8db843b0dfa01f:
>
> Merge tag 'u-boot-amlogic-20220107' of
> https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
> (2022-01-09 07:56:31 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/
>
> for you to fetch changes up to 046bf8d4c512ad6501fe9e77508bbe1292a29fef:
>
> net: fastboot: make UDP port net: configurable (2022-01-15 18:54:21 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Please pull u-boot-net/next
@ 2022-01-15 20:01 Ramon Fried
2022-01-17 16:11 ` Tom Rini
0 siblings, 1 reply; 16+ messages in thread
From: Ramon Fried @ 2022-01-15 20:01 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
Hi Tom,
Please pull the latest changes from u-boot-net/next branch which include:
* PXE label override support
* Fastboot UDP configurable port
* new phy driver: TI DP83869HM
* and few minor fixes to dsa.
The following changes since commit 0dadad6d7c5769d6258baeaf1b8db843b0dfa01f:
Merge tag 'u-boot-amlogic-20220107' of
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
(2022-01-09 07:56:31 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/
for you to fetch changes up to 046bf8d4c512ad6501fe9e77508bbe1292a29fef:
net: fastboot: make UDP port net: configurable (2022-01-15 18:54:21 +0200)
----------------------------------------------------------------
Amjad Ouled-Ameur (1):
cmd: pxe_utils: sysboot: add label override support
Christian Gmeiner (1):
net: fastboot: make UDP port net: configurable
Dominic Rath (1):
net: phy: add TI DP83869HM ethernet driver
Marek Vasut (1):
net: eth-phy: Demote missing phy-handle log message to debug
Markus Koch (1):
net: fsl: Fix busy flag polling register
Vladimir Oltean (2):
net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY
net: dsa: sja1105: fix device id detection
boot/pxe_utils.c | 15 ++
doc/README.pxe | 6 +
drivers/fastboot/Kconfig | 7 +
drivers/net/eth-phy-uclass.c | 2 +-
drivers/net/fm/memac_phy.c | 2 +-
drivers/net/fsl_ls_mdio.c | 4 +-
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83869.c | 507 +++++++++++++++++++++++++++++++++++
drivers/net/phy/ti_phy_init.c | 4 +
drivers/net/phy/ti_phy_init.h | 1 +
drivers/net/sja1105.c | 6 -
include/dt-bindings/net/ti-dp83869.h | 60 +++++
include/fsl_memac.h | 1 -
net/dsa-uclass.c | 11 +
net/fastboot.c | 5 +-
16 files changed, 623 insertions(+), 15 deletions(-)
create mode 100644 drivers/net/phy/dp83869.c
create mode 100644 include/dt-bindings/net/ti-dp83869.h
Thanks,
Ramon
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-12-02 8:25 Ramon Fried
@ 2021-12-02 14:57 ` Tom Rini
0 siblings, 0 replies; 16+ messages in thread
From: Tom Rini @ 2021-12-02 14:57 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 713 bytes --]
On Thu, Dec 02, 2021 at 10:25:19AM +0200, Ramon Fried wrote:
> Hi Tom,
> This pull request contains:
> * New Broadcom NetXtreme driver
> * Support for socat for netconsole
> * Felix switch soft reset fix
>
> The following changes since commit fc47dbb26e9d86a688e69e198b2ed0749db16756:
>
> Merge branch '2021-12-01-Kconfig-migrations' into next (2021-12-01
> 13:32:35 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/
>
> for you to fetch changes up to 300761b68da14fc77f3e236f35c459fb1a6769ce:
>
> board: brcm-ns3: Load netXtreme firmware (2021-12-02 08:34:01 +0200)
>
Applied to u-boot/next, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Please pull u-boot-net/next
@ 2021-12-02 8:25 Ramon Fried
2021-12-02 14:57 ` Tom Rini
0 siblings, 1 reply; 16+ messages in thread
From: Ramon Fried @ 2021-12-02 8:25 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
Hi Tom,
This pull request contains:
* New Broadcom NetXtreme driver
* Support for socat for netconsole
* Felix switch soft reset fix
The following changes since commit fc47dbb26e9d86a688e69e198b2ed0749db16756:
Merge branch '2021-12-01-Kconfig-migrations' into next (2021-12-01
13:32:35 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/
for you to fetch changes up to 300761b68da14fc77f3e236f35c459fb1a6769ce:
board: brcm-ns3: Load netXtreme firmware (2021-12-02 08:34:01 +0200)
----------------------------------------------------------------
Andy Shevchenko (1):
tools/netconsole: Add support for socat
Bharat Gooty (2):
net: brcm: netXtreme driver
board: brcm-ns3: Load netXtreme firmware
Radu Bulie (1):
drivers: net: Soft reset felix switch core
Ramon Fried (1):
driver: net: Makefile: order file alphabetically
board/broadcom/bcmns3/ns3.c | 5 +-
drivers/net/Kconfig | 1 +
drivers/net/Makefile | 79 +-
drivers/net/bnxt/Kconfig | 7 +
drivers/net/bnxt/Makefile | 5 +
drivers/net/bnxt/bnxt.c | 1708 +++++++++++++++++++++++++++++++
drivers/net/bnxt/bnxt.h | 390 +++++++
drivers/net/bnxt/bnxt_dbg.h | 536 ++++++++++
drivers/net/bnxt/bnxt_hsi.h | 889 ++++++++++++++++
drivers/net/mscc_eswitch/felix_switch.c | 13 +-
include/pci_ids.h | 3 +
tools/netconsole | 12 +-
12 files changed, 3605 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/bnxt/Kconfig
create mode 100644 drivers/net/bnxt/Makefile
create mode 100644 drivers/net/bnxt/bnxt.c
create mode 100644 drivers/net/bnxt/bnxt.h
create mode 100644 drivers/net/bnxt/bnxt_dbg.h
create mode 100644 drivers/net/bnxt/bnxt_hsi.h
Thanks,
Ramon
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-23 3:27 ` Tom Rini
@ 2021-11-23 8:12 ` Ramon Fried
0 siblings, 0 replies; 16+ messages in thread
From: Ramon Fried @ 2021-11-23 8:12 UTC (permalink / raw)
To: Tom Rini; +Cc: U-Boot Mailing List
On Tue, Nov 23, 2021 at 5:27 AM Tom Rini <trini@konsulko.com> wrote:
>
> On Tue, Nov 23, 2021 at 05:25:27AM +0200, Ramon Fried wrote:
>
> > this PR includes the following net changes for next:
> >
> > - Various DSA additions
> > - bootp: fix for VCI string
> > - tsec: support for promiscuous mode
> > - add Aspeed MDIO driver
> > The following changes since commit 2ad8d0cb950da2233a2ec030533f4e54c6d04126:
> >
> > Merge branch 'efi-2022-01' of
> > https://source.denx.de/u-boot/custodians/u-boot-efi (2021-11-20
> > 09:36:37 -0500)
> >
> > are available in the Git repository at:
> >
> > https://source.denx.de/u-boot/custodians/u-boot-net.git/
> >
> > for you to fetch changes up to 8fc7def2838f40298ba2d86447dc8974de94a243:
> >
> > net: phy: realtek: Add tx/rx delay config for 8211e (2021-11-21
> > 21:32:32 +0200)
>
> Since this is for next please make it based on -next and not master,
> thanks!
>
> --
> Tom
Will do.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-23 3:25 Ramon Fried
@ 2021-11-23 3:27 ` Tom Rini
2021-11-23 8:12 ` Ramon Fried
0 siblings, 1 reply; 16+ messages in thread
From: Tom Rini @ 2021-11-23 3:27 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 833 bytes --]
On Tue, Nov 23, 2021 at 05:25:27AM +0200, Ramon Fried wrote:
> this PR includes the following net changes for next:
>
> - Various DSA additions
> - bootp: fix for VCI string
> - tsec: support for promiscuous mode
> - add Aspeed MDIO driver
> The following changes since commit 2ad8d0cb950da2233a2ec030533f4e54c6d04126:
>
> Merge branch 'efi-2022-01' of
> https://source.denx.de/u-boot/custodians/u-boot-efi (2021-11-20
> 09:36:37 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/
>
> for you to fetch changes up to 8fc7def2838f40298ba2d86447dc8974de94a243:
>
> net: phy: realtek: Add tx/rx delay config for 8211e (2021-11-21
> 21:32:32 +0200)
Since this is for next please make it based on -next and not master,
thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Please pull u-boot-net/next
@ 2021-11-23 3:25 Ramon Fried
2021-11-23 3:27 ` Tom Rini
0 siblings, 1 reply; 16+ messages in thread
From: Ramon Fried @ 2021-11-23 3:25 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
this PR includes the following net changes for next:
- Various DSA additions
- bootp: fix for VCI string
- tsec: support for promiscuous mode
- add Aspeed MDIO driver
The following changes since commit 2ad8d0cb950da2233a2ec030533f4e54c6d04126:
Merge branch 'efi-2022-01' of
https://source.denx.de/u-boot/custodians/u-boot-efi (2021-11-20
09:36:37 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/
for you to fetch changes up to 8fc7def2838f40298ba2d86447dc8974de94a243:
net: phy: realtek: Add tx/rx delay config for 8211e (2021-11-21
21:32:32 +0200)
----------------------------------------------------------------
Bin Meng (3):
net: dsa: Use true instead of 1 in the set_promisc() call
net: fec_mxc: Declare 'promisc' as bool
net: tsec: Make redundant_init() static
Dylan Hung (1):
drivers: net: add Aspeed MDIO driver
Peter Hoyes (1):
cmd: pxe_utils: Check fdtcontroladdr in label_boot
Samuel Holland (1):
net: phy: realtek: Add tx/rx delay config for 8211e
Vladimir Oltean (11):
net: phy: mscc: add support for VSC8502 in dual RGMII mode
net: tsec: add support for promiscuous mode
include: import if_vlan.h from Linux
net: dsa: allow drivers to get the port OF node
net: introduce a helper to determine whether to use in-band autoneg
net: dsa: felix: configure the in-band autoneg property based on
OF node info
net: dsa: add driver for NXP SJA1105 L2 switch
net: dsa: sja1105: add support for SGMII
arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings
configs: ls1021a-tsn: enable sja1105 switch driver
configs: ls1021a-tsn: enable the generation of random Ethernet
MAC addresses
Walter Stoll (1):
net: bootp: Correct VCI string transmission
arch/arm/dts/ls1021a-tsn.dts | 103 +
boot/pxe_utils.c | 8 +-
configs/ls1021atsn_qspi_defconfig | 3 +
configs/ls1021atsn_sdcard_defconfig | 3 +
configs/pine64_plus_defconfig | 1 -
drivers/core/of_extra.c | 12 +
drivers/net/Kconfig | 23 +
drivers/net/Makefile | 2 +
drivers/net/aspeed_mdio.c | 128 ++
drivers/net/fec_mxc.h | 2 +-
drivers/net/mscc_eswitch/felix_switch.c | 10 +-
drivers/net/phy/Kconfig | 10 -
drivers/net/phy/mscc.c | 56 +
drivers/net/phy/realtek.c | 69 +-
drivers/net/sja1105.c | 3376 +++++++++++++++++++++++++++++++
drivers/net/tsec.c | 22 +-
include/dm/of_extra.h | 14 +
include/linux/if_vlan.h | 26 +
include/net/dsa.h | 12 +
include/tsec.h | 2 +
net/bootp.c | 2 +-
net/dsa-uclass.c | 22 +-
22 files changed, 3854 insertions(+), 52 deletions(-)
create mode 100644 drivers/net/aspeed_mdio.c
create mode 100644 drivers/net/sja1105.c
create mode 100644 include/linux/if_vlan.h
Thanks,
Ramon
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-17 14:09 ` Tom Rini
@ 2021-11-23 3:24 ` Ramon Fried
0 siblings, 0 replies; 16+ messages in thread
From: Ramon Fried @ 2021-11-23 3:24 UTC (permalink / raw)
To: Tom Rini; +Cc: U-Boot Mailing List
On Wed, Nov 17, 2021 at 4:09 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Tue, Nov 16, 2021 at 08:08:36AM +0200, Ramon Fried wrote:
> > On Mon, Nov 15, 2021 at 7:37 PM Tom Rini <trini@konsulko.com> wrote:
> > >
> > > On Wed, Nov 10, 2021 at 07:58:42PM +0200, Ramon Fried wrote:
> > >
> > > > his PR includes the following net changes for next:
> > > >
> > > > - Various DSA additions
> > > > - bootp: fix for VCI string
> > > > - tsec: support for promiscuous mode
> > > > - macb: Fix for random MAC address not saved to the environment.
> > > > The following changes since commit e8e9c6f48400989c5fc54467576f8d535bd713e6:
> > > >
> > > > Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
> > > > (2021-11-09 15:05:33 -0500)
> > > >
> > > > are available in the Git repository at:
> > > >
> > > > https://source.denx.de/u-boot/custodians/u-boot-net.git/
> > > >
> > > > for you to fetch changes up to 23a438b2d05db54c95315094fe9ac8fe0c46213e:
> > > >
> > > > net: uclass: Save ethernet MAC address when generated (2021-11-10
> > > > 19:55:01 +0200)
> > >
> > > As it seems we're still actively discussing the implications of:
> > >
> > > > Michal Simek (1):
> > > > net: uclass: Save ethernet MAC address when generated
> > >
> > > Can you please re-spin with that dropped? Thanks!
> >
> > I sure can, but I'm against that. the patch should stay IMO.
> > I saw the thread, it actually started in IRC, where I already gave my opinion.
>
> I'm cycling back to this again because setting aside that I'm not
> convinced yet this is the right path, it's also an incomplete patch
> because the help text for NET_RANDOM_ETHADDR specifically says the
> environment is not updated, which is no longer true after that patch and
> needs to be corrected.
>
> --
> Tom
Sending a new one in a new thread.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-16 6:08 ` Ramon Fried
@ 2021-11-17 14:09 ` Tom Rini
2021-11-23 3:24 ` Ramon Fried
0 siblings, 1 reply; 16+ messages in thread
From: Tom Rini @ 2021-11-17 14:09 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 1668 bytes --]
On Tue, Nov 16, 2021 at 08:08:36AM +0200, Ramon Fried wrote:
> On Mon, Nov 15, 2021 at 7:37 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Wed, Nov 10, 2021 at 07:58:42PM +0200, Ramon Fried wrote:
> >
> > > his PR includes the following net changes for next:
> > >
> > > - Various DSA additions
> > > - bootp: fix for VCI string
> > > - tsec: support for promiscuous mode
> > > - macb: Fix for random MAC address not saved to the environment.
> > > The following changes since commit e8e9c6f48400989c5fc54467576f8d535bd713e6:
> > >
> > > Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
> > > (2021-11-09 15:05:33 -0500)
> > >
> > > are available in the Git repository at:
> > >
> > > https://source.denx.de/u-boot/custodians/u-boot-net.git/
> > >
> > > for you to fetch changes up to 23a438b2d05db54c95315094fe9ac8fe0c46213e:
> > >
> > > net: uclass: Save ethernet MAC address when generated (2021-11-10
> > > 19:55:01 +0200)
> >
> > As it seems we're still actively discussing the implications of:
> >
> > > Michal Simek (1):
> > > net: uclass: Save ethernet MAC address when generated
> >
> > Can you please re-spin with that dropped? Thanks!
>
> I sure can, but I'm against that. the patch should stay IMO.
> I saw the thread, it actually started in IRC, where I already gave my opinion.
I'm cycling back to this again because setting aside that I'm not
convinced yet this is the right path, it's also an incomplete patch
because the help text for NET_RANDOM_ETHADDR specifically says the
environment is not updated, which is no longer true after that patch and
needs to be corrected.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-15 17:37 ` Tom Rini
@ 2021-11-16 6:08 ` Ramon Fried
2021-11-17 14:09 ` Tom Rini
0 siblings, 1 reply; 16+ messages in thread
From: Ramon Fried @ 2021-11-16 6:08 UTC (permalink / raw)
To: Tom Rini; +Cc: U-Boot Mailing List
On Mon, Nov 15, 2021 at 7:37 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Wed, Nov 10, 2021 at 07:58:42PM +0200, Ramon Fried wrote:
>
> > his PR includes the following net changes for next:
> >
> > - Various DSA additions
> > - bootp: fix for VCI string
> > - tsec: support for promiscuous mode
> > - macb: Fix for random MAC address not saved to the environment.
> > The following changes since commit e8e9c6f48400989c5fc54467576f8d535bd713e6:
> >
> > Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
> > (2021-11-09 15:05:33 -0500)
> >
> > are available in the Git repository at:
> >
> > https://source.denx.de/u-boot/custodians/u-boot-net.git/
> >
> > for you to fetch changes up to 23a438b2d05db54c95315094fe9ac8fe0c46213e:
> >
> > net: uclass: Save ethernet MAC address when generated (2021-11-10
> > 19:55:01 +0200)
>
> As it seems we're still actively discussing the implications of:
>
> > Michal Simek (1):
> > net: uclass: Save ethernet MAC address when generated
>
> Can you please re-spin with that dropped? Thanks!
>
> --
> Tom
I sure can, but I'm against that. the patch should stay IMO.
I saw the thread, it actually started in IRC, where I already gave my opinion.
Thanks,
Ramon.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Please pull u-boot-net/next
2021-11-10 17:58 Ramon Fried
@ 2021-11-15 17:37 ` Tom Rini
2021-11-16 6:08 ` Ramon Fried
0 siblings, 1 reply; 16+ messages in thread
From: Tom Rini @ 2021-11-15 17:37 UTC (permalink / raw)
To: Ramon Fried; +Cc: U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 974 bytes --]
On Wed, Nov 10, 2021 at 07:58:42PM +0200, Ramon Fried wrote:
> his PR includes the following net changes for next:
>
> - Various DSA additions
> - bootp: fix for VCI string
> - tsec: support for promiscuous mode
> - macb: Fix for random MAC address not saved to the environment.
> The following changes since commit e8e9c6f48400989c5fc54467576f8d535bd713e6:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
> (2021-11-09 15:05:33 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-net.git/
>
> for you to fetch changes up to 23a438b2d05db54c95315094fe9ac8fe0c46213e:
>
> net: uclass: Save ethernet MAC address when generated (2021-11-10
> 19:55:01 +0200)
As it seems we're still actively discussing the implications of:
> Michal Simek (1):
> net: uclass: Save ethernet MAC address when generated
Can you please re-spin with that dropped? Thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Please pull u-boot-net/next
@ 2021-11-10 17:58 Ramon Fried
2021-11-15 17:37 ` Tom Rini
0 siblings, 1 reply; 16+ messages in thread
From: Ramon Fried @ 2021-11-10 17:58 UTC (permalink / raw)
To: Tom Rini, U-Boot Mailing List
his PR includes the following net changes for next:
- Various DSA additions
- bootp: fix for VCI string
- tsec: support for promiscuous mode
- macb: Fix for random MAC address not saved to the environment.
The following changes since commit e8e9c6f48400989c5fc54467576f8d535bd713e6:
Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
(2021-11-09 15:05:33 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-net.git/
for you to fetch changes up to 23a438b2d05db54c95315094fe9ac8fe0c46213e:
net: uclass: Save ethernet MAC address when generated (2021-11-10
19:55:01 +0200)
----------------------------------------------------------------
Bin Meng (3):
net: dsa: Use true instead of 1 in the set_promisc() call
net: fec_mxc: Declare 'promisc' as bool
net: tsec: Make redundant_init() static
Michal Simek (1):
net: uclass: Save ethernet MAC address when generated
Peter Hoyes (1):
cmd: pxe_utils: Check fdtcontroladdr in label_boot
Vladimir Oltean (11):
net: phy: mscc: add support for VSC8502 in dual RGMII mode
net: tsec: add support for promiscuous mode
include: import if_vlan.h from Linux
net: dsa: allow drivers to get the port OF node
net: introduce a helper to determine whether to use in-band autoneg
net: dsa: felix: configure the in-band autoneg property based on
OF node info
net: dsa: add driver for NXP SJA1105 L2 switch
net: dsa: sja1105: add support for SGMII
arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings
configs: ls1021a-tsn: enable sja1105 switch driver
configs: ls1021a-tsn: enable the generation of random Ethernet
MAC addresses
Walter Stoll (1):
net: bootp: Correct VCI string transmission
arch/arm/dts/ls1021a-tsn.dts | 103 +
cmd/pxe_utils.c | 8 +-
configs/ls1021atsn_qspi_defconfig | 3 +
configs/ls1021atsn_sdcard_defconfig | 3 +
drivers/core/of_extra.c | 12 +
drivers/net/Kconfig | 16 +
drivers/net/Makefile | 1 +
drivers/net/fec_mxc.h | 2 +-
drivers/net/mscc_eswitch/felix_switch.c | 10 +-
drivers/net/phy/mscc.c | 56 +
drivers/net/sja1105.c | 3376 +++++++++++++++++++++++++++++++
drivers/net/tsec.c | 22 +-
include/dm/of_extra.h | 14 +
include/linux/if_vlan.h | 26 +
include/net/dsa.h | 12 +
include/tsec.h | 2 +
net/bootp.c | 2 +-
net/dsa-uclass.c | 22 +-
net/eth-uclass.c | 2 +
19 files changed, 3677 insertions(+), 15 deletions(-)
create mode 100644 drivers/net/sja1105.c
create mode 100644 include/linux/if_vlan.h
Thanks,
Ramon.
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2022-04-15 15:47 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-03 9:13 Please pull u-boot-net/next Ramon Fried
2021-11-10 17:58 Ramon Fried
2021-11-15 17:37 ` Tom Rini
2021-11-16 6:08 ` Ramon Fried
2021-11-17 14:09 ` Tom Rini
2021-11-23 3:24 ` Ramon Fried
2021-11-23 3:25 Ramon Fried
2021-11-23 3:27 ` Tom Rini
2021-11-23 8:12 ` Ramon Fried
2021-12-02 8:25 Ramon Fried
2021-12-02 14:57 ` Tom Rini
2022-01-15 20:01 Ramon Fried
2022-01-17 16:11 ` Tom Rini
2022-04-13 15:10 Ramon Fried
2022-04-13 22:57 ` Tom Rini
2022-04-15 15:47 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.