From: Romain Izard <romain.izard.pro@gmail.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Wenyou Yang <wenyou.yang@atmel.com>,
Josh Wu <rainyfeeling@outlook.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Thierry Reding <thierry.reding@gmail.com>,
Richard Genoud <richard.genoud@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-clk@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
linux-mtd <linux-mtd@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-serial@vger.kernel.org,
linux-usb@vger.kernel.org,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 8/9] atmel_flexcom: Support backup mode
Date: Wed, 20 Sep 2017 10:30:31 +0200 [thread overview]
Message-ID: <CAGkQfmM08UqpLoMegRGQwmamN=Z74fem9VWT5yGcSjkYdS5c=Q@mail.gmail.com> (raw)
In-Reply-To: <20170919152504.nhp5i734u75gb5gq@dell>
2017-09-19 17:25 GMT+02:00 Lee Jones <lee.jones@linaro.org>:
> On Tue, 19 Sep 2017, Nicolas Ferre wrote:
>
>> On 15/09/2017 at 16:04, Romain Izard wrote:
>> > The controller used by a flexcom module is configured at boot, and left
>> > alone after this. As the configuration will be lost after backup mode,
>> > restore the state of the flexcom driver on resume.
>> >
>> > Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
>>
>> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> On sama5d2 Xplained board (i2c0 from flexcom 4).
>> and obviously:
>> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>>
>> Thanks Romain!
>>
>> Regards,
>>
>> > ---
>> > drivers/mfd/atmel-flexcom.c | 65 ++++++++++++++++++++++++++++++++++-----------
>> > 1 file changed, 50 insertions(+), 15 deletions(-)
>
> This is the first time I've seen this patch. Why's that?
>
As the patchset covers many subsystems, get_maintainers.pl provided a
very long list of both developpers and mailing lists (28). I thought it
was a good idea to shorten it a little. Bad idea. Sorry.
Best regards,
--
Romain Izard
WARNING: multiple messages have this Message-ID (diff)
From: Romain Izard <romain.izard.pro@gmail.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Wenyou Yang <wenyou.yang@atmel.com>,
Josh Wu <rainyfeeling@outlook.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Thierry Reding <thierry.reding@gmail.com>,
Richard Genoud <richard.genoud@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-clk@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 8/9] atmel_flexcom: Support backup mode
Date: Wed, 20 Sep 2017 10:30:31 +0200 [thread overview]
Message-ID: <CAGkQfmM08UqpLoMegRGQwmamN=Z74fem9VWT5yGcSjkYdS5c=Q@mail.gmail.com> (raw)
In-Reply-To: <20170919152504.nhp5i734u75gb5gq@dell>
2017-09-19 17:25 GMT+02:00 Lee Jones <lee.jones@linaro.org>:
> On Tue, 19 Sep 2017, Nicolas Ferre wrote:
>
>> On 15/09/2017 at 16:04, Romain Izard wrote:
>> > The controller used by a flexcom module is configured at boot, and left
>> > alone after this. As the configuration will be lost after backup mode,
>> > restore the state of the flexcom driver on resume.
>> >
>> > Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
>>
>> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> On sama5d2 Xplained board (i2c0 from flexcom 4).
>> and obviously:
>> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>>
>> Thanks Romain!
>>
>> Regards,
>>
>> > ---
>> > drivers/mfd/atmel-flexcom.c | 65 ++++++++++++++++++++++++++++++++++-----------
>> > 1 file changed, 50 insertions(+), 15 deletions(-)
>
> This is the first time I've seen this patch. Why's that?
>
As the patchset covers many subsystems, get_maintainers.pl provided a
very long list of both developpers and mailing lists (28). I thought it
was a good idea to shorten it a little. Bad idea. Sorry.
Best regards,
--
Romain Izard
WARNING: multiple messages have this Message-ID (diff)
From: romain.izard.pro@gmail.com (Romain Izard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 8/9] atmel_flexcom: Support backup mode
Date: Wed, 20 Sep 2017 10:30:31 +0200 [thread overview]
Message-ID: <CAGkQfmM08UqpLoMegRGQwmamN=Z74fem9VWT5yGcSjkYdS5c=Q@mail.gmail.com> (raw)
In-Reply-To: <20170919152504.nhp5i734u75gb5gq@dell>
2017-09-19 17:25 GMT+02:00 Lee Jones <lee.jones@linaro.org>:
> On Tue, 19 Sep 2017, Nicolas Ferre wrote:
>
>> On 15/09/2017 at 16:04, Romain Izard wrote:
>> > The controller used by a flexcom module is configured at boot, and left
>> > alone after this. As the configuration will be lost after backup mode,
>> > restore the state of the flexcom driver on resume.
>> >
>> > Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
>>
>> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> On sama5d2 Xplained board (i2c0 from flexcom 4).
>> and obviously:
>> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>>
>> Thanks Romain!
>>
>> Regards,
>>
>> > ---
>> > drivers/mfd/atmel-flexcom.c | 65 ++++++++++++++++++++++++++++++++++-----------
>> > 1 file changed, 50 insertions(+), 15 deletions(-)
>
> This is the first time I've seen this patch. Why's that?
>
As the patchset covers many subsystems, get_maintainers.pl provided a
very long list of both developpers and mailing lists (28). I thought it
was a good idea to shorten it a little. Bad idea. Sorry.
Best regards,
--
Romain Izard
next prev parent reply other threads:[~2017-09-20 8:30 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-15 14:04 [PATCH v2 0/9] Various patches for SAMA5D2 backup mode Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-15 14:04 ` [PATCH v2 1/9] clk: at91: pmc: Wait for clocks when resuming Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-22 12:05 ` Ludovic Desroches
2017-09-22 12:05 ` Ludovic Desroches
2017-09-22 12:05 ` Ludovic Desroches
2017-09-22 12:13 ` Nicolas Ferre
2017-09-22 12:13 ` Nicolas Ferre
2017-09-22 12:13 ` Nicolas Ferre
2017-09-15 14:04 ` [PATCH v2 2/9] clk: at91: pmc: Save SCSR during suspend Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-15 14:04 ` [PATCH v2 3/9] clk: at91: pmc: Support backup for programmable clocks Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-22 10:31 ` Nicolas Ferre
2017-09-22 10:31 ` Nicolas Ferre
2017-09-22 10:31 ` Nicolas Ferre
2017-09-25 8:25 ` Romain Izard
2017-09-25 8:25 ` Romain Izard
2017-09-25 8:25 ` Romain Izard
2017-09-15 14:04 ` [PATCH v2 4/9] mtd: nand: atmel: Avoid ECC errors when leaving backup mode Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-18 9:50 ` Boris Brezillon
2017-09-18 9:50 ` Boris Brezillon
2017-09-18 9:50 ` Boris Brezillon
2017-09-15 14:04 ` [PATCH v2 5/9] mtd: nand: atmel: Report PMECC failures as errors Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-18 10:00 ` Boris Brezillon
2017-09-18 10:00 ` Boris Brezillon
2017-09-18 10:00 ` Boris Brezillon
2017-09-21 9:22 ` Romain Izard
2017-09-21 9:22 ` Romain Izard
2017-09-21 9:22 ` Romain Izard
2017-09-15 14:04 ` [PATCH v2 6/9] ehci-atmel: Power down during suspend is normal Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-22 12:40 ` Nicolas Ferre
2017-09-22 12:40 ` Nicolas Ferre
2017-09-22 12:40 ` Nicolas Ferre
2017-09-15 14:04 ` [PATCH v2 7/9] pwm: atmel-tcb: Support backup mode Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-22 12:42 ` Nicolas Ferre
2017-09-22 12:42 ` Nicolas Ferre
2017-09-22 12:42 ` Nicolas Ferre
2017-09-15 14:04 ` [PATCH v2 8/9] atmel_flexcom: " Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-19 9:29 ` Nicolas Ferre
2017-09-19 9:29 ` Nicolas Ferre
2017-09-19 9:29 ` Nicolas Ferre
2017-09-19 15:25 ` Lee Jones
2017-09-19 15:25 ` Lee Jones
2017-09-19 15:25 ` Lee Jones
2017-09-20 8:30 ` Romain Izard [this message]
2017-09-20 8:30 ` Romain Izard
2017-09-20 8:30 ` Romain Izard
2017-09-20 9:18 ` Alexandre Belloni
2017-09-20 9:18 ` Alexandre Belloni
2017-09-20 9:18 ` Alexandre Belloni
2017-09-15 14:04 ` [PATCH v2 9/9] tty/serial: atmel: Prevent a warning on suspend Romain Izard
2017-09-15 14:04 ` Romain Izard
2017-09-19 10:19 ` Nicolas Ferre
2017-09-19 10:19 ` Nicolas Ferre
2017-09-19 10:19 ` Nicolas Ferre
2017-09-20 14:35 ` Richard Genoud
2017-09-20 14:35 ` Richard Genoud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGkQfmM08UqpLoMegRGQwmamN=Z74fem9VWT5yGcSjkYdS5c=Q@mail.gmail.com' \
--to=romain.izard.pro@gmail.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=dwmw2@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=marek.vasut@gmail.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=rainyfeeling@outlook.com \
--cc=richard.genoud@gmail.com \
--cc=sboyd@codeaurora.org \
--cc=stern@rowland.harvard.edu \
--cc=thierry.reding@gmail.com \
--cc=wenyou.yang@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.