* BCM4313 troubles and backtrace
@ 2012-01-14 19:02 Джонатан Вашингтон
2012-01-14 21:36 ` Джонатан Вашингтон
0 siblings, 1 reply; 2+ messages in thread
From: Джонатан Вашингтон @ 2012-01-14 19:02 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 3274 bytes --]
I have a BCM4313 wireless card (14e4:4727) in an Acer Aspire One 722
(dual core, 64bit).
With my kernel's default brcmsmac driver, the system freezes after
associating with an AP. With the wl driver, the card is not detected.
With a bleeding edge brcmsmac driver, the system doesn't freeze, but
connectivity drops out (while staying associated with the AP)
frequently for long periods of time, allowing only a few KB of traffic
with the network at a time.
I get a number of warnings in dmesg and an *occasional* kernel
backtrace. Below is a backtrace, and attached is a full dmesg, I
believe from the same boot. You can see by the dmesg that I've tried
a number of things; please ignore parts irrelevant to this issue.
WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.2~rc7/debian/build/source_amd64_none/net/wireless/mlme.c:366
cfg80211_send_assoc_timeout+0x103/0x105 [cfg80211]()
Hardware name: AO722
Modules linked in: cryptd aes_x86_64 aes_generic bcma(O) powernow_k8
mperf cpufreq_powersave cpufreq_userspace cpufreq_conservative
cpufreq_stats parport_pc ppdev lp parport binfmt_misc uinput fuse nfsd
nfs lockd fscache auth_rpcgss nfs_acl sunrpc xfs ext2 loop joydev
snd_hda_codec_conexant snd_hda_codec_hdmi uvcvideo videodev media
v4l2_compat_ioctl32 ums_realtek usb_storage uas arc4 snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device
radeon ttm sp5100_tco drm_kms_helper brcmsmac i2c_piix4 mac80211 drm
acer_wmi brcmutil sparse_keymap ohci_hcd cfg80211 snd psmouse crc8
ehci_hcd usbcore soundcore pcspkr cordic usb_common i2c_algo_bit
serio_raw i2c_core k10temp evdev ac rfkill snd_page_alloc battery
power_supply wmi button video processor thermal_sys ext4 mbcache jbd2
crc16 sd_mod crc_t10dif ahci libahci libata scsi_mod [last unloaded:
atl1c]
Pid: 17725, comm: kworker/u:2 Tainted: G W O 3.2.0-rc7-amd64 #1
Call Trace:
[<ffffffff810457ed>] ? warn_slowpath_common+0x78/0x8c
[<ffffffffa0204882>] ? cfg80211_send_assoc_timeout+0x103/0x105 [cfg80211]
[<ffffffff81338d69>] ? __mutex_unlock_slowpath+0x29/0x2f
[<ffffffffa0268244>] ? ieee80211_assoc_done+0x47/0x1a4 [mac80211]
[<ffffffff8103f908>] ? select_task_rq_fair+0x39f/0x67e
[<ffffffff810506e7>] ? usleep_range+0x3e/0x3e
[<ffffffff8133984b>] ? _raw_spin_lock_bh+0xe/0x1c
[<ffffffff81013509>] ? paravirt_read_tsc+0x5/0x8
[<ffffffff81013965>] ? native_sched_clock+0x27/0x2f
[<ffffffff81013972>] ? sched_clock+0x5/0x8
[<ffffffff81062608>] ? sched_clock_local+0xd/0x6f
[<ffffffff81026990>] ? _flat_send_IPI_mask+0x68/0x78
[<ffffffff8103e3d3>] ? try_to_wake_up+0x187/0x197
[<ffffffffa026a6ad>] ? ieee80211_work_work+0x1006/0x1065 [mac80211]
[<ffffffff81036e14>] ? set_next_entity+0x32/0x55
[<ffffffff8100d027>] ? load_TLS+0x7/0xa
[<ffffffff8100d617>] ? __switch_to+0xc1/0x20e
[<ffffffffa02696a7>] ? free_work+0xe/0xe [mac80211]
[<ffffffff81059d95>] ? process_one_work+0x163/0x284
[<ffffffff8105ad5d>] ? worker_thread+0xc2/0x145
[<ffffffff8105ac9b>] ? manage_workers.isra.23+0x15b/0x15b
[<ffffffff8105de99>] ? kthread+0x76/0x7e
[<ffffffff813407f4>] ? kernel_thread_helper+0x4/0x10
[<ffffffff8105de23>] ? kthread_worker_fn+0x139/0x139
[<ffffffff813407f0>] ? gs_change+0x13/0x13
---[ end trace efce98d16f124c84 ]---
--
Jonathan
[-- Attachment #2: dmesg.2012-01-14.txt --]
[-- Type: text/plain, Size: 85663 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc7-amd64 (Debian 3.2~rc7-1~experimental.1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP Wed Dec 28 14:29:59 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-rc7-amd64 root=UUID=32923385-5ab5-4d4e-ba2d-8b74ec88393c ro quiet radeon.modeset=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000de639000 (usable)
[ 0.000000] BIOS-e820: 00000000de639000 - 00000000de839000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000de839000 - 00000000dfd3f000 (usable)
[ 0.000000] BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
[ 0.000000] BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000010f000000 (usable)
[ 0.000000] BIOS-e820: 000000010f000000 - 000000011f000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Acer AO722/JE10-BZ, BIOS V1.05 08/24/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x10f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFEBD000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dff00000 page 4k
[ 0.000000] kernel direct mapping tables up to dff00000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000010f000000
[ 0.000000] 0100000000 - 010f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10f000000 @ dfefe000-dff00000
[ 0.000000] RAMDISK: 37b0e000 - 37d7f000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000dfef5120 00064 (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000dfef4000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: DSDT 00000000dfee8000 089F9 (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
[ 0.000000] ACPI: FACS 00000000dfe97000 00040
[ 0.000000] ACPI: HPET 00000000dfef3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 00000000dfef2000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 00000000dfef1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT 00000000dfee7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 00000000dfee6000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000dfee5000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dfee3000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000010f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000010f000000
[ 0.000000] NODE_DATA [000000010effb000 - 000000010effffff]
[ 0.000000] [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff88010aa00000-ffff88010dffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0010f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000de639
[ 0.000000] 0: 0x000de839 -> 0x000dfd3f
[ 0.000000] 0: 0x000dfef6 -> 0x000dff00
[ 0.000000] 0: 0x00100000 -> 0x0010f000
[ 0.000000] On node 0 totalpages: 977624
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 897921 pages, LIFO batch:31
[ 0.000000] Normal zone: 840 pages used for memmap
[ 0.000000] Normal zone: 60600 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000de639000 - 00000000de839000
[ 0.000000] PM: Registered nosave memory: 00000000dfd3f000 - 00000000dfdbf000
[ 0.000000] PM: Registered nosave memory: 00000000dfdbf000 - 00000000dfebf000
[ 0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88010ec00000 s82112 r8192 d24384 u524288
[ 0.000000] pcpu-alloc: s82112 r8192 d24384 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962443
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-rc7-amd64 root=UUID=32923385-5ab5-4d4e-ba2d-8b74ec88393c ro quiet radeon.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3777696k/4440064k available (3339k kernel code, 529568k absent, 132800k reserved, 3388k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.466 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.93 BogoMIPS (lpj=3989864)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004164] Security Framework initialized
[ 0.004178] AppArmor: AppArmor disabled by boot time parameter
[ 0.008377] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012449] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014414] Mount-cache hash table entries: 256
[ 0.014766] Initializing cgroup subsys cpuacct
[ 0.014783] Initializing cgroup subsys memory
[ 0.014821] Initializing cgroup subsys devices
[ 0.014832] Initializing cgroup subsys freezer
[ 0.014838] Initializing cgroup subsys net_cls
[ 0.014844] Initializing cgroup subsys blkio
[ 0.014937] tseg: 00dff00000
[ 0.014943] CPU: Physical Processor ID: 0
[ 0.014947] CPU: Processor Core ID: 0
[ 0.014953] mce: CPU supports 6 MCE banks
[ 0.016189] ACPI: Core revision 20110623
[ 0.032711] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072891] CPU0: AMD C-60 APU with Radeon(tm) HD Graphics stepping 00
[ 0.076004] Performance Events: AMD PMU driver.
[ 0.076004] ... version: 0
[ 0.076004] ... bit width: 48
[ 0.076004] ... generic registers: 4
[ 0.076004] ... value mask: 0000ffffffffffff
[ 0.076004] ... max period: 00007fffffffffff
[ 0.076004] ... fixed-purpose events: 0
[ 0.076004] ... event mask: 000000000000000f
[ 0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.076004] Booting Node 0, Processors #1
[ 0.076004] smpboot cpu 1: start_ip = 9a000
[ 0.164068] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164131] Brought up 2 CPUs
[ 0.164138] Total of 2 processors activated (3989.93 BogoMIPS).
[ 0.165004] devtmpfs: initialized
[ 0.176591] PM: Registering ACPI NVS region at de639000 (2097152 bytes)
[ 0.176591] PM: Registering ACPI NVS region at dfdbf000 (1048576 bytes)
[ 0.177051] print_constraints: dummy:
[ 0.177296] NET: Registered protocol family 16
[ 0.177767] Extended Config Space enabled on 0 nodes
[ 0.177824] ACPI: bus type pci registered
[ 0.178114] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.178124] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.203110] PCI: Using configuration type 1 for base access
[ 0.204903] bio: create slab <bio-0> at 0
[ 0.204903] ACPI: Added _OSI(Module Device)
[ 0.204903] ACPI: Added _OSI(Processor Device)
[ 0.204903] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204903] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.209555] ACPI: EC: Look up EC in DSDT
[ 0.213135] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.222512] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.241410] ACPI: Interpreter enabled
[ 0.241424] ACPI: (supports S0 S3 S4 S5)
[ 0.241494] ACPI: Using IOAPIC for interrupt routing
[ 0.396983] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.397357] ACPI: No dock devices found.
[ 0.397362] HEST: Table not found.
[ 0.397370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.397724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.398197] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.398203] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.398209] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.398215] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.398221] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.398226] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.398232] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.398237] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.398242] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.398247] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.398253] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.398258] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.398263] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.398268] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.398273] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.398279] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.398284] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff]
[ 0.398300] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.398327] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.398396] pci 0000:00:01.0: [1002:9807] type 0 class 0x000300
[ 0.398413] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.398425] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.398437] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 0.398492] pci 0000:00:01.0: supports D1 D2
[ 0.398523] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.398538] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 0.398604] pci 0000:00:01.1: supports D1 D2
[ 0.398737] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.398766] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.398784] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.398802] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.398820] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.398838] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.398856] pci 0000:00:11.0: reg 24: [mem 0xf044c000-0xf044c3ff]
[ 0.398937] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.398962] pci 0000:00:12.0: reg 10: [mem 0xf044b000-0xf044bfff]
[ 0.399079] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.399777] pci 0000:00:12.2: reg 10: [mem 0xf044a000-0xf044a0ff]
[ 0.403123] pci 0000:00:12.2: supports D1 D2
[ 0.403136] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.403150] pci 0000:00:12.2: PME# disabled
[ 0.403217] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.403248] pci 0000:00:13.0: reg 10: [mem 0xf0449000-0xf0449fff]
[ 0.403373] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.404061] pci 0000:00:13.2: reg 10: [mem 0xf0448000-0xf04480ff]
[ 0.407268] pci 0000:00:13.2: supports D1 D2
[ 0.407282] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.407296] pci 0000:00:13.2: PME# disabled
[ 0.407365] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.407500] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.407542] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.407635] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.407645] pci 0000:00:14.2: PME# disabled
[ 0.407676] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.407799] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.407889] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.407991] pci 0000:00:15.0: supports D1 D2
[ 0.408088] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.408185] pci 0000:00:15.2: supports D1 D2
[ 0.408236] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.408337] pci 0000:00:15.3: supports D1 D2
[ 0.408391] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.408457] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.408522] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.408587] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.408661] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.408728] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.408789] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.408849] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.409075] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.409096] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.409105] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.409114] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.409123] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.409131] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.409140] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.409148] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.409156] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.409164] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.409173] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.409181] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.409189] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.409197] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.409206] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.409214] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.409222] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
[ 0.409319] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.409332] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.409342] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.409356] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.409477] pci 0000:06:00.0: [1969:2062] type 0 class 0x000200
[ 0.409517] pci 0000:06:00.0: reg 10: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.409540] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
[ 0.409664] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409675] pci 0000:06:00.0: PME# disabled
[ 0.416173] pci 0000:00:15.2: PCI bridge to [bus 06-06]
[ 0.416191] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.416200] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.416374] pci 0000:07:00.0: [14e4:4727] type 0 class 0x000280
[ 0.416415] pci 0000:07:00.0: reg 10: [mem 0xf0100000-0xf0103fff 64bit]
[ 0.416557] pci 0000:07:00.0: supports D1 D2
[ 0.416562] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.416573] pci 0000:07:00.0: PME# disabled
[ 0.424206] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.424227] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.424286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.424677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.424779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
[ 0.424908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT]
[ 0.425086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.425237] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.425246] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.425250] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.454018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.454342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.454699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.455021] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.455274] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.455484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.455763] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.456014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.456557] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.456557] vgaarb: loaded
[ 0.456557] vgaarb: bridge control possible 0000:00:01.0
[ 0.456557] PCI: Using ACPI for IRQ routing
[ 0.459324] PCI: pci_cache_line_size set to 64 bytes
[ 0.459548] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.459556] reserve RAM buffer: 00000000de639000 - 00000000dfffffff
[ 0.460052] reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff
[ 0.460062] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
[ 0.460069] reserve RAM buffer: 000000010f000000 - 000000010fffffff
[ 0.460486] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.460499] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.462553] Switching to clocksource hpet
[ 0.465565] pnp: PnP ACPI init
[ 0.465620] ACPI: bus type pnp registered
[ 0.466046] pnp 00:00: [bus 00-ff]
[ 0.466055] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.466063] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.466071] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.466079] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.466086] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.466098] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.466105] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.466112] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.466120] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.466127] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.466134] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.466141] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.466148] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.466155] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.466162] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.466170] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.466177] pnp 00:00: [mem 0xfc000000-0xffffffff window]
[ 0.466184] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.466352] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.466540] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.466548] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.466714] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.466724] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.466734] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467223] pnp 00:02: [irq 0 disabled]
[ 0.467313] pnp 00:02: [irq 8]
[ 0.467320] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.467414] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.467649] pnp 00:03: [io 0x0000-0x000f]
[ 0.467657] pnp 00:03: [io 0x0081-0x008f]
[ 0.467664] pnp 00:03: [io 0x00c0-0x00df]
[ 0.467671] pnp 00:03: [dma 4]
[ 0.467777] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.467809] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.467893] pnp 00:04: [irq 13]
[ 0.467995] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.468301] pnp 00:05: [io 0x0070-0x0071]
[ 0.468404] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.468435] pnp 00:06: [io 0x0061]
[ 0.468547] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.468639] pnp 00:07: [io 0x0060]
[ 0.468646] pnp 00:07: [io 0x0064]
[ 0.468731] pnp 00:07: [irq 1]
[ 0.468838] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.469315] pnp 00:08: [irq 12]
[ 0.469422] pnp 00:08: Plug and Play ACPI device, IDs ETD0500 ETD0001 PNP0f13 (active)
[ 0.469521] pnp 00:09: [io 0x0010-0x001f]
[ 0.469528] pnp 00:09: [io 0x002e-0x002f]
[ 0.469535] pnp 00:09: [io 0x0072-0x0073]
[ 0.469541] pnp 00:09: [io 0x0080]
[ 0.469548] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.469554] pnp 00:09: [io 0x0092]
[ 0.469560] pnp 00:09: [io 0x0400-0x04cf]
[ 0.469567] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.469573] pnp 00:09: [io 0x04d6]
[ 0.469579] pnp 00:09: [io 0x0680-0x06ff]
[ 0.469585] pnp 00:09: [io 0x077a]
[ 0.469591] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.469597] pnp 00:09: [io 0x0c14]
[ 0.469603] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.469610] pnp 00:09: [io 0x0c6c]
[ 0.469615] pnp 00:09: [io 0x0c6f]
[ 0.469622] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.469809] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.469818] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.469827] system 00:09: [io 0x04d6] has been reserved
[ 0.469836] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.469844] system 00:09: [io 0x077a] has been reserved
[ 0.469853] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.469861] system 00:09: [io 0x0c14] has been reserved
[ 0.469870] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.469878] system 00:09: [io 0x0c6c] has been reserved
[ 0.469886] system 00:09: [io 0x0c6f] has been reserved
[ 0.469895] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.469905] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470074] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.470082] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.470248] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.470258] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.470268] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.532181] pnp: PnP ACPI: found 11 devices
[ 0.532191] ACPI: ACPI bus type pnp unregistered
[ 0.551597] PCI: max bus depth: 1 pci_try_num: 2
[ 0.551705] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.551729] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.551740] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.551752] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.551764] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.551779] pci 0000:00:15.2: PCI bridge to [bus 06-06]
[ 0.551787] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.551798] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.551815] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.551826] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.551898] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.551910] pci 0000:00:15.0: setting latency timer to 64
[ 0.551925] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.551935] pci 0000:00:15.2: setting latency timer to 64
[ 0.551950] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.551960] pci 0000:00:15.3: setting latency timer to 64
[ 0.551972] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.551979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.551985] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.551993] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.552000] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.552026] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.552033] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.552040] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.552047] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.552054] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.552061] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.552067] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.552074] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.552081] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.552087] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.552094] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
[ 0.552102] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.552109] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.552115] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.552123] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.552129] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.552136] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.552142] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.552149] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.552156] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.552162] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.552169] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.552176] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.552182] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.552189] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.552196] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.552203] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
[ 0.552210] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.552216] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.552223] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.552230] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.552237] pci_bus 0000:06: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.552244] pci_bus 0000:07: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.552495] NET: Registered protocol family 2
[ 0.553137] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.556797] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.563416] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.564320] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.564328] TCP reno registered
[ 0.564379] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.564460] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.565059] NET: Registered protocol family 1
[ 0.565102] pci 0000:00:01.0: Boot video device
[ 0.740446] PCI: CLS 64 bytes, default 64
[ 0.740593] Unpacking initramfs...
[ 0.890230] Freeing initrd memory: 2500k freed
[ 0.892173] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.892186] Placing 64MB software IO TLB between ffff8800da639000 - ffff8800de639000
[ 0.892194] software IO TLB at phys 0xda639000 - 0xde639000
[ 0.892327] Simple Boot Flag at 0x44 set to 0x1
[ 0.893479] perf: AMD IBS detected (0x000000ff)
[ 0.894523] audit: initializing netlink socket (disabled)
[ 0.894558] type=2000 audit(1326518391.892:1): initialized
[ 0.949063] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.990540] VFS: Disk quotas dquot_6.5.2
[ 0.990710] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.990983] msgmni has been set to 7383
[ 0.992121] alg: No test for stdrng (krng)
[ 0.992261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.992274] io scheduler noop registered
[ 0.992280] io scheduler deadline registered
[ 0.992404] io scheduler cfq registered (default)
[ 0.993364] ERST: Table is not found!
[ 0.993369] GHES: HEST is not enabled!
[ 0.993771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.054253] Linux agpgart interface v0.103
[ 1.054561] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 1.101495] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.101517] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.102310] mousedev: PS/2 mouse device common for all mice
[ 1.103460] rtc_cmos 00:05: RTC can wake from S4
[ 1.104270] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.104387] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.104423] cpuidle: using governor ladder
[ 1.104430] cpuidle: using governor menu
[ 1.105078] TCP cubic registered
[ 1.105377] NET: Registered protocol family 10
[ 1.106967] Mobile IPv6
[ 1.106975] NET: Registered protocol family 17
[ 1.106989] Registering the dns_resolver key type
[ 1.108298] PM: Hibernation image not present or could not be loaded.
[ 1.108364] registered taskstats version 1
[ 1.128501] rtc_cmos 00:05: setting system clock to 2012-01-14 05:19:52 UTC (1326518392)
[ 1.128717] Initializing network drop monitor service
[ 1.132670] Freeing unused kernel memory: 560k freed
[ 1.133050] Write protecting the kernel read-only data: 6144k
[ 1.142807] Freeing unused kernel memory: 740k freed
[ 1.152186] Freeing unused kernel memory: 696k freed
[ 1.168406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.206987] udevd[49]: starting version 175
[ 1.295291] SCSI subsystem initialized
[ 1.323687] libata version 3.00 loaded.
[ 1.325831] ahci 0000:00:11.0: version 3.0
[ 1.325951] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.326158] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.326170] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.328494] scsi0 : ahci
[ 1.328876] ata1: SATA max UDMA/133 abar m1024@0xf044c000 port 0xf044c100 irq 19
[ 1.828482] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.831870] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
[ 1.831880] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.835005] ata1.00: configured for UDMA/133
[ 1.835653] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5
[ 1.845912] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.845924] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.846100] sd 0:0:0:0: [sda] Write Protect is off
[ 1.846110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.846189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.892401] Refined TSC clocksource calibration: 997.502 MHz.
[ 1.892417] Switching to clocksource tsc
[ 1.903391] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.905369] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.590963] PM: Starting manual resume from disk
[ 2.590976] PM: Hibernation image partition 8:3 present
[ 2.590981] PM: Looking for hibernation image.
[ 2.591557] PM: Image not found (code -22)
[ 2.591567] PM: Hibernation image not present or could not be loaded.
[ 2.654798] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.487472] udevd[244]: starting version 175
[ 5.370631] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.370650] ACPI: Power Button [PWRB]
[ 5.370849] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.370861] ACPI: Sleep Button [SLPB]
[ 5.371100] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.371269] ACPI: Lid Switch [LID]
[ 5.371451] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.371461] ACPI: Power Button [PWRF]
[ 5.418082] wmi: Mapper loaded
[ 5.427388] ACPI: acpi_idle registered with cpuidle
[ 5.464402] ACPI: AC Adapter [ACAD] (on-line)
[ 5.496469] acpi device:01: registered as cooling_device2
[ 5.496720] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 5.496737] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.733432] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.772489] Disabling lock debugging due to kernel taint
[ 5.773582] bcma-pci-bridge 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.773663] bcma-pci-bridge 0000:07:00.0: setting latency timer to 64
[ 5.773860] Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 5.773890] Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 5.773970] Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 5.806796] Bus registered
[ 5.834027] usbcore: registered new interface driver usbfs
[ 5.834102] usbcore: registered new interface driver hub
[ 5.834242] usbcore: registered new device driver usb
[ 5.845376] atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.845399] atl1c 0000:06:00.0: setting latency timer to 64
[ 5.861934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.862084] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.862197] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 5.862205] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.862273] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 5.862363] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.862413] QUIRK: Enable AMD PLL fix
[ 5.862501] ehci_hcd 0000:00:12.2: debug port 1
[ 5.862547] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf044a000
[ 5.872277] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.872351] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.872357] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.872363] usb usb1: Product: EHCI Host Controller
[ 5.872367] usb usb1: Manufacturer: Linux 3.2.0-rc7-amd64 ehci_hcd
[ 5.872372] usb usb1: SerialNumber: 0000:00:12.2
[ 5.872934] hub 1-0:1.0: USB hub found
[ 5.872950] hub 1-0:1.0: 5 ports detected
[ 5.873283] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.873411] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 5.873419] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.873439] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 5.873459] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.873504] ehci_hcd 0000:00:13.2: debug port 1
[ 5.873532] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0448000
[ 5.884383] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.884778] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.884784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.884790] usb usb2: Product: EHCI Host Controller
[ 5.884795] usb usb2: Manufacturer: Linux 3.2.0-rc7-amd64 ehci_hcd
[ 5.884799] usb usb2: SerialNumber: 0000:00:13.2
[ 5.885252] hub 2-0:1.0: USB hub found
[ 5.885269] hub 2-0:1.0: 5 ports detected
[ 5.973471] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 6.196260] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 6.208374] ACPI: Battery Slot [BAT1] (battery present)
[ 6.239961] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.240123] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.240248] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 6.240256] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 6.240289] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 6.240428] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044b000
[ 6.289320] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.289352] acer_wmi: Function bitmap for Communication Button: 0x1
[ 6.289361] acer_wmi: Brightness must be controlled by generic video driver
[ 6.290661] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 6.295953] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[ 6.301211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.301220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.301225] usb usb3: Product: OHCI Host Controller
[ 6.301230] usb usb3: Manufacturer: Linux 3.2.0-rc7-amd64 ohci_hcd
[ 6.301235] usb usb3: SerialNumber: 0000:00:12.0
[ 6.301950] hub 3-0:1.0: USB hub found
[ 6.302007] hub 3-0:1.0: 5 ports detected
[ 6.302885] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.303016] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 6.303068] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 6.303160] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 6.303223] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0449000
[ 6.306798] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 6.360076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.360089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.360097] usb usb4: Product: OHCI Host Controller
[ 6.360103] usb usb4: Manufacturer: Linux 3.2.0-rc7-amd64 ohci_hcd
[ 6.360109] usb usb4: SerialNumber: 0000:00:13.0
[ 6.360578] hub 4-0:1.0: USB hub found
[ 6.360596] hub 4-0:1.0: 5 ports detected
[ 6.438476] usb 2-1: New USB device found, idVendor=064e, idProduct=d214
[ 6.438488] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=4
[ 6.438496] usb 2-1: Product: WebCam
[ 6.438502] usb 2-1: Manufacturer: SuYin
[ 6.438508] usb 2-1: SerialNumber: HF0319-M08C-OV01-VA-R01.00.00
[ 6.446473] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.447412] lib80211: common routines for IEEE802.11 drivers
[ 6.447423] lib80211_crypt: registered algorithm 'NULL'
[ 6.468143] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.468390] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 6.602519] [drm] Initialized drm 1.1.0 20060810
[ 6.933274] wl: module license 'MIXED/Proprietary' taints kernel.
[ 6.972500] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.972625] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X
[ 6.972688] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 6.994237] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[ 7.031207] [drm] radeon kernel modesetting enabled.
[ 7.106058] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[ 7.193544] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.193815] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 7.194282] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.194486] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 7.355242] Linux media interface: v0.10
[ 7.378046] Linux video capture interface: v2.00
[ 7.389396] hda_codec: CX20588: BIOS auto-probing.
[ 7.390433] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 7.393310] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.393331] radeon 0000:00:01.0: setting latency timer to 64
[ 7.393846] [drm] initializing kernel modesetting (PALM 0x1002:0x9807 0x1025:0x0598).
[ 7.394015] [drm] register mmio base: 0xF0400000
[ 7.394021] [drm] register mmio size: 262144
[ 7.403215] ATOM BIOS: Acer
[ 7.403300] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 7.403309] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 7.403658] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.403668] [drm] RAM width 32bits DDR
[ 7.404805] [TTM] Zone kernel: Available graphics memory: 1891096 kiB.
[ 7.404813] [TTM] Initializing pool allocator.
[ 7.404892] [drm] radeon: 256M of VRAM memory ready
[ 7.404899] [drm] radeon: 512M of GTT memory ready.
[ 7.404944] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.404950] [drm] Driver supports precise vblank timestamp query.
[ 7.405029] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
[ 7.405042] radeon 0000:00:01.0: radeon: using MSI.
[ 7.405104] [drm] radeon: irq initialized.
[ 7.405118] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.407701] [drm] Loading PALM Microcode
[ 7.448186] uvcvideo: Found UVC 1.00 device WebCam (064e:d214)
[ 7.452350] input: WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input10
[ 7.452728] usbcore: registered new interface driver uvcvideo
[ 7.452733] USB Video Class driver (1.1.1)
[ 7.500274] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 7.603130] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 7.605502] radeon 0000:00:01.0: WB enabled
[ 7.622326] [drm] ring test succeeded in 1 usecs
[ 7.622668] [drm] radeon: ib pool ready.
[ 7.622838] [drm] ib test succeeded in 0 usecs
[ 7.625613] [drm] Radeon Display Connectors
[ 7.625622] [drm] Connector 0:
[ 7.625626] [drm] LVDS
[ 7.625630] [drm] HPD1
[ 7.625637] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.625643] [drm] Encoders:
[ 7.625648] [drm] LCD1: INTERNAL_UNIPHY
[ 7.625653] [drm] Connector 1:
[ 7.625656] [drm] HDMI-A
[ 7.625660] [drm] HPD2
[ 7.625666] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.625671] [drm] Encoders:
[ 7.625675] [drm] DFP1: INTERNAL_UNIPHY
[ 7.625679] [drm] Connector 2:
[ 7.625682] [drm] VGA
[ 7.625688] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 7.625693] [drm] Encoders:
[ 7.625697] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.625755] [drm] Internal thermal controller without fan control
[ 7.625868] [drm] radeon: power management initialized
[ 8.026865] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 8.095170] [drm] fb mappable at 0xE0142000
[ 8.095179] [drm] vram apper at 0xE0000000
[ 8.095184] [drm] size 4325376
[ 8.095188] [drm] fb depth is 24
[ 8.095192] [drm] pitch is 5632
[ 8.095676] fbcon: radeondrmfb (fb0) is primary device
[ 8.645894] Console: switching to colour frame buffer device 170x48
[ 8.655799] fb0: radeondrmfb frame buffer device
[ 8.655804] drm: registered panic notifier
[ 8.655823] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
[ 8.728319] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 9.454830] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 9.747854] Adding 5859324k swap on /dev/sda3. Priority:-1 extents:1 across:5859324k
[ 9.759847] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.230638] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.353036] loop: module loaded
[ 11.465175] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 11.467022] SGI XFS Quota Management subsystem
[ 11.468821] XFS (sda5): Mounting Filesystem
[ 11.717133] XFS (sda5): Ending clean mount
[ 12.811586] RPC: Registered named UNIX socket transport module.
[ 12.811597] RPC: Registered udp transport module.
[ 12.811602] RPC: Registered tcp transport module.
[ 12.811607] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.879565] FS-Cache: Loaded
[ 12.916106] FS-Cache: Netfs 'nfs' registered for caching
[ 12.928379] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.214272] fuse init (API version 7.17)
[ 16.172246] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 18.345347] Bluetooth: Core ver 2.16
[ 18.345412] NET: Registered protocol family 31
[ 18.345418] Bluetooth: HCI device and connection manager initialized
[ 18.345428] Bluetooth: HCI socket layer initialized
[ 18.345433] Bluetooth: L2CAP socket layer initialized
[ 18.345455] Bluetooth: SCO socket layer initialized
[ 18.470007] Bluetooth: RFCOMM TTY layer initialized
[ 18.470019] Bluetooth: RFCOMM socket layer initialized
[ 18.470024] Bluetooth: RFCOMM ver 1.11
[ 19.498170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.498177] Bluetooth: BNEP filters: protocol multicast
[ 19.508993] powernow-k8: Found 1 AMD C-60 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 19.509018] powernow-k8: Core Performance Boosting: on.
[ 19.509104] powernow-k8: 0 : pstate 0 (1000 MHz)
[ 19.509108] powernow-k8: 1 : pstate 1 (800 MHz)
[ 21.334578] lp: driver loaded but no devices found
[ 21.399272] ppdev: user-space parallel port driver
[ 29.948697] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.044515] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 33.137507] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 151.980349] lib80211_crypt: unregistered algorithm 'NULL'
[ 154.670090] lib80211: common routines for IEEE802.11 drivers
[ 154.670104] lib80211_crypt: registered algorithm 'NULL'
[ 175.256431] lib80211_crypt: unregistered algorithm 'NULL'
[ 180.664811] wl: Unknown symbol lib80211_get_crypto_ops (err 0)
[ 195.965029] lib80211: common routines for IEEE802.11 drivers
[ 195.965041] lib80211_crypt: registered algorithm 'NULL'
[ 2407.375669] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 2407.377372] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2417.576042] eth0: no IPv6 routers present
[ 3021.044313] lib80211_crypt: unregistered algorithm 'NULL'
[ 3021.332423] NET: Unregistered protocol family 31
[ 3021.496294] atl1c 0000:06:00.0: PCI INT A disabled
[ 3054.765938] cfg80211: Calling CRDA to update world regulatory domain
[ 3054.830939] brcmsmac: disagrees about version of symbol bcma_core_disable
[ 3054.830952] brcmsmac: Unknown symbol bcma_core_disable (err -22)
[ 3054.831092] brcmsmac: disagrees about version of symbol bcma_driver_unregister
[ 3054.831098] brcmsmac: Unknown symbol bcma_driver_unregister (err -22)
[ 3054.831139] brcmsmac: disagrees about version of symbol bcma_core_enable
[ 3054.831144] brcmsmac: Unknown symbol bcma_core_enable (err -22)
[ 3054.831172] brcmsmac: disagrees about version of symbol bcma_core_is_enabled
[ 3054.831178] brcmsmac: Unknown symbol bcma_core_is_enabled (err -22)
[ 3054.831233] brcmsmac: disagrees about version of symbol __bcma_driver_register
[ 3054.831238] brcmsmac: Unknown symbol __bcma_driver_register (err -22)
[ 3151.131225] atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3151.131332] atl1c 0000:06:00.0: setting latency timer to 64
[ 3151.260280] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 3158.561253] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 3158.561508] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3169.560032] eth0: no IPv6 routers present
[ 4234.193573] brcmsmac: disagrees about version of symbol bcma_core_disable
[ 4234.193589] brcmsmac: Unknown symbol bcma_core_disable (err -22)
[ 4234.193775] brcmsmac: disagrees about version of symbol bcma_driver_unregister
[ 4234.193783] brcmsmac: Unknown symbol bcma_driver_unregister (err -22)
[ 4234.193837] brcmsmac: disagrees about version of symbol bcma_core_enable
[ 4234.193844] brcmsmac: Unknown symbol bcma_core_enable (err -22)
[ 4234.193882] brcmsmac: disagrees about version of symbol bcma_core_is_enabled
[ 4234.193889] brcmsmac: Unknown symbol bcma_core_is_enabled (err -22)
[ 4234.193962] brcmsmac: disagrees about version of symbol __bcma_driver_register
[ 4234.193969] brcmsmac: Unknown symbol __bcma_driver_register (err -22)
[ 4279.791193] brcmsmac: disagrees about version of symbol bcma_core_disable
[ 4279.791206] brcmsmac: Unknown symbol bcma_core_disable (err -22)
[ 4279.791352] brcmsmac: disagrees about version of symbol bcma_driver_unregister
[ 4279.791357] brcmsmac: Unknown symbol bcma_driver_unregister (err -22)
[ 4279.791398] brcmsmac: disagrees about version of symbol bcma_core_enable
[ 4279.791404] brcmsmac: Unknown symbol bcma_core_enable (err -22)
[ 4279.791432] brcmsmac: disagrees about version of symbol bcma_core_is_enabled
[ 4279.791437] brcmsmac: Unknown symbol bcma_core_is_enabled (err -22)
[ 4279.791493] brcmsmac: disagrees about version of symbol __bcma_driver_register
[ 4279.791498] brcmsmac: Unknown symbol __bcma_driver_register (err -22)
[ 8323.521213] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 19
[ 8323.890969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8323.893772] brcms_module_init: register returned 0
[ 8349.669312] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8349.671206] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8349.674954] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8356.614521] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8356.620630] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8356.625291] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8357.568485] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8357.568595] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8358.313183] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8358.317260] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8358.321638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8361.647201] wlan0: authenticate with 00:1c:df:ef:41:65 (try 1)
[ 8361.671806] wlan0: authenticated
[ 8361.671916] wlan0: associate with 00:1c:df:ef:41:65 (try 1)
[ 8361.698497] wlan0: RX AssocResp from 00:1c:df:ef:41:65 (capab=0x411 status=0 aid=4)
[ 8361.698512] wlan0: associated
[ 8361.698527] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8361.698534] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8361.698542] wlan0: moving STA 00:1c:df:ef:41:65 to state 3
[ 8361.699132] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 8361.704366] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 8361.707075] ieee80211 phy0: changing basic rates failed: -22
[ 8361.709797] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8361.714081] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8361.718067] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8362.780535] Intel AES-NI instructions are not detected.
[ 8362.969461] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 8365.350777] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8365.359893] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8365.375729] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8367.864154] eth0: no IPv6 routers present
[ 8371.952321] wlan0: no IPv6 routers present
[ 8429.187204] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Down
[ 8507.205549] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8507.291003] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8591.277627] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8591.341979] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8591.342010] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 8591.342024] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[ 8591.342038] wlan0: deauthenticating from 00:1c:df:ef:41:65 by local choice (reason=3)
[ 8591.372508] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8591.372522] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8591.372529] wlan0: moving STA 00:1c:df:ef:41:65 to state 0
[ 8591.372908] cfg80211: Calling CRDA for country: XV
[ 8591.460836] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8591.460856] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8591.465085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8591.845151] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8591.930724] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8593.816590] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8593.816617] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8593.821352] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8593.923087] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8593.923107] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8593.927061] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8594.260829] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8594.346704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8594.758059] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8594.758081] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8594.762780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8597.073755] wlan0: authenticate with 00:1c:df:ef:41:65 (try 1)
[ 8597.075787] wlan0: authenticated
[ 8597.076099] wlan0: associate with 00:1c:df:ef:41:65 (try 1)
[ 8597.078946] wlan0: RX AssocResp from 00:1c:df:ef:41:65 (capab=0x411 status=0 aid=4)
[ 8597.078962] wlan0: associated
[ 8597.078976] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8597.078983] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8597.078991] wlan0: moving STA 00:1c:df:ef:41:65 to state 3
[ 8597.081197] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 8597.081224] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 8597.081238] ieee80211 phy0: changing basic rates failed: -22
[ 8597.081249] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8597.082885] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8599.686734] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 8604.228556] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8604.229614] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8604.233919] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8607.800050] wlan0: no IPv6 routers present
[ 8632.739368] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8632.793574] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8632.793605] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 8632.793620] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[ 8632.793634] wlan0: deauthenticating from 00:1c:df:ef:41:65 by local choice (reason=3)
[ 8632.828152] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8632.828165] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8632.828173] wlan0: moving STA 00:1c:df:ef:41:65 to state 0
[ 8632.840798] cfg80211: Calling CRDA to update world regulatory domain
[ 8632.931297] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8632.931320] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8632.935722] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8633.324896] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8633.410816] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8635.868906] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8635.868934] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8635.874243] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8635.978774] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8635.978800] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8635.983502] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8636.344661] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8636.430700] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8636.830922] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8636.830946] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8636.835627] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8639.013230] wlan0: authenticate with 00:16:cb:02:cf:ae (try 1)
[ 8639.014879] wlan0: authenticated
[ 8639.014994] wlan0: associate with 00:16:cb:02:cf:ae (try 1)
[ 8639.016794] wlan0: RX AssocResp from 00:16:cb:02:cf:ae (capab=0x401 status=0 aid=4)
[ 8639.016809] wlan0: associated
[ 8639.016822] wlan0: moving STA 00:16:cb:02:cf:ae to state 1
[ 8639.016830] wlan0: moving STA 00:16:cb:02:cf:ae to state 2
[ 8639.016838] wlan0: moving STA 00:16:cb:02:cf:ae to state 3
[ 8639.017966] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 8639.017981] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 8639.017994] ieee80211 phy0: changing basic rates failed: -22
[ 8639.018005] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8639.019766] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8648.692467] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 8649.232316] wlan0: no IPv6 routers present
[ 8695.918628] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8695.918654] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 8695.918669] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 8695.918690] wlan0: moving STA 00:16:cb:02:cf:ae to state 2
[ 8695.918697] wlan0: moving STA 00:16:cb:02:cf:ae to state 1
[ 8695.918705] wlan0: moving STA 00:16:cb:02:cf:ae to state 0
[ 8695.924599] cfg80211: Calling CRDA to update world regulatory domain
[ 8697.473587] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8697.473610] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8697.478155] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8697.896849] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8697.982484] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8703.488989] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8703.490608] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8704.726555] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8704.726583] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8704.731259] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8705.096247] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8705.096352] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8705.467100] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8705.467125] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8705.471883] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8707.790710] wlan0: authenticate with 00:1c:df:ef:41:65 (try 1)
[ 8707.799695] wlan0: authenticated
[ 8707.799829] wlan0: associate with 00:1c:df:ef:41:65 (try 1)
[ 8707.802819] wlan0: RX AssocResp from 00:1c:df:ef:41:65 (capab=0x411 status=0 aid=4)
[ 8707.802834] wlan0: associated
[ 8707.802849] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8707.802856] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8707.802864] wlan0: moving STA 00:1c:df:ef:41:65 to state 3
[ 8707.803427] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 8707.803453] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 8707.803467] ieee80211 phy0: changing basic rates failed: -22
[ 8707.803478] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8707.805192] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8708.854408] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 8715.312097] eth0: no IPv6 routers present
[ 8718.640304] wlan0: no IPv6 routers present
[ 8724.012075] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8724.014405] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8724.015779] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8740.017857] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8740.025144] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8740.078928] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 8762.532952] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8762.607888] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8762.607919] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 8762.607934] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[ 8762.607949] wlan0: deauthenticating from 00:1c:df:ef:41:65 by local choice (reason=3)
[ 8762.640093] wlan0: moving STA 00:1c:df:ef:41:65 to state 2
[ 8762.640106] wlan0: moving STA 00:1c:df:ef:41:65 to state 1
[ 8762.640114] wlan0: moving STA 00:1c:df:ef:41:65 to state 0
[ 8762.656768] cfg80211: Calling CRDA for country: XB
[ 8762.740068] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8762.740092] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8762.744847] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8763.272635] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8763.272740] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8765.575828] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8765.575849] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8765.580459] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8765.685634] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8765.685660] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8765.690284] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8766.171516] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8766.171633] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8766.634827] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8766.634853] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8766.640585] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8768.819662] wlan0: authenticate with 00:16:cb:02:cf:ae (try 1)
[ 8768.821180] wlan0: authenticated
[ 8768.821297] wlan0: associate with 00:16:cb:02:cf:ae (try 1)
[ 8768.823368] wlan0: RX AssocResp from 00:16:cb:02:cf:ae (capab=0x401 status=0 aid=4)
[ 8768.823384] wlan0: associated
[ 8768.823398] wlan0: moving STA 00:16:cb:02:cf:ae to state 1
[ 8768.823406] wlan0: moving STA 00:16:cb:02:cf:ae to state 2
[ 8768.823414] wlan0: moving STA 00:16:cb:02:cf:ae to state 3
[ 8768.824673] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 8768.824689] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 8768.824703] ieee80211 phy0: changing basic rates failed: -22
[ 8768.824714] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8768.826359] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8772.688141] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 8776.272187] eth0: no IPv6 routers present
[ 8779.744175] wlan0: no IPv6 routers present
[ 8841.587737] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 8841.642819] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8841.642840] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 8841.642856] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[ 8841.642871] wlan0: deauthenticating from 00:16:cb:02:cf:ae by local choice (reason=3)
[ 8841.642998] wlan0: moving STA 00:16:cb:02:cf:ae to state 2
[ 8841.643007] wlan0: moving STA 00:16:cb:02:cf:ae to state 1
[ 8841.643015] wlan0: moving STA 00:16:cb:02:cf:ae to state 0
[ 8841.668336] cfg80211: Calling CRDA to update world regulatory domain
[ 8841.761996] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8841.762015] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8841.766633] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8842.165439] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8842.165554] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8844.707072] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8844.707098] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 8844.711793] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8845.065979] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8845.067030] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8845.473369] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[ 8845.473485] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 8855.984058] eth0: no IPv6 routers present
[17095.488239] lxappearance[13726]: segfault at c ip 00007f0865dbdd10 sp 00007fff6b4d8ba0 error 4 in libgtk-x11-2.0.so.0.2400.8[7f0865ca3000+435000]
[17096.828987] lxappearance[13728]: segfault at c ip 00007f23b0a94d10 sp 00007fffb2995b40 error 4 in libgtk-x11-2.0.so.0.2400.8[7f23b097a000+435000]
[17099.848974] lxappearance[13729]: segfault at c ip 00007f996af91d10 sp 00007fff5cdf6a40 error 4 in libgtk-x11-2.0.so.0.2400.8[7f996ae77000+435000]
[17696.161323] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[17697.211332] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[17697.211351] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[17697.215361] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17697.686606] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[17697.686756] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17698.076358] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[17698.076381] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[17698.081091] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17698.441950] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[17698.442069] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17699.164922] PM: Syncing filesystems ... done.
[17699.217277] PM: Preparing system for mem sleep
[17699.305609] Freezing user space processes ... (elapsed 0.01 seconds) done.
[17699.320212] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[17699.336217] PM: Entering mem sleep
[17699.336872] Suspending console(s) (use no_console_suspend to debug)
[17699.343412] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[17699.344218] sd 0:0:0:0: [sda] Stopping disk
[17699.386516] bcma-pci-bridge 0000:07:00.0: PCI INT A disabled
[17699.386537] ACPI handle has no context!
[17699.387612] ehci_hcd 0000:00:13.2: PCI INT B disabled
[17699.388146] ehci_hcd 0000:00:12.2: PCI INT B disabled
[17699.416445] ohci_hcd 0000:00:13.0: PCI INT A disabled
[17699.420444] ohci_hcd 0000:00:12.0: PCI INT A disabled
[17699.493273] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[17699.493393] snd_hda_intel 0000:00:01.1: PCI INT B disabled
[17699.493433] ACPI handle has no context!
[17699.965320] ahci 0000:00:11.0: PCI INT A disabled
[17699.965388] PM: suspend of devices complete after 628.262 msecs
[17699.980623] ehci_hcd 0000:00:13.2: PME# enabled
[17699.996329] ehci_hcd 0000:00:12.2: PME# enabled
[17699.996359] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[17700.012309] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[17700.012368] PM: late suspend of devices complete after 46.972 msecs
[17700.012413] ACPI: Preparing to enter system sleep state S3
[17700.060649] PM: Saving platform NVS memory
[17700.114210] Disabling non-boot CPUs ...
[17700.117107] CPU 1 is now offline
[17700.118289] ACPI: Low-level resume complete
[17700.118289] PM: Restoring platform NVS memory
[17700.118289] Enabling non-boot CPUs ...
[17700.118289] Booting Node 0 Processor 1 APIC 0x1
[17700.118289] smpboot cpu 1: start_ip = 9a000
[17700.130013] Calibrating delay loop (skipped) already calibrated this CPU
[17700.151249] NMI watchdog enabled, takes one hw-pmu counter.
[17700.152266] CPU1 is up
[17700.155666] ACPI: Waking up from system sleep state S3
[17700.156398] radeon 0000:00:01.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[17700.156578] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)
[17700.156642] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[17700.172403] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf044a000-0xf044a0ff] (PCI address [0xf044a000-0xf044a0ff])
[17700.172451] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[17700.172498] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[17700.172507] ehci_hcd 0000:00:12.2: PME# disabled
[17700.188403] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf0448000-0xf04480ff] (PCI address [0xf0448000-0xf04480ff])
[17700.188452] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[17700.188482] ehci_hcd 0000:00:13.2: PME# disabled
[17700.188658] pcieport 0000:00:15.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[17700.188728] pcieport 0000:00:15.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[17700.188796] pcieport 0000:00:15.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[17700.189063] atl1c 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[17700.189095] atl1c 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[17700.189106] atl1c 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[17700.189200] bcma-pci-bridge 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[17700.189230] bcma-pci-bridge 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0100004)
[17700.189240] bcma-pci-bridge 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[17700.189252] bcma-pci-bridge 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[17700.189391] PM: early resume of devices complete after 33.094 msecs
[17700.189639] radeon 0000:00:01.0: setting latency timer to 64
[17700.189935] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[17700.189947] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[17700.190032] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X
[17700.190168] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[17700.190216] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[17700.190251] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[17700.190344] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[17700.190374] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[17700.190423] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[17700.190525] bcma-pci-bridge 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[17700.190568] sd 0:0:0:0: [sda] Starting disk
[17700.218453] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[17700.218755] radeon 0000:00:01.0: WB enabled
[17700.235107] [drm] ring test succeeded in 1 usecs
[17700.235136] [drm] ib test succeeded in 0 usecs
[17700.301182] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[17701.949078] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17702.424337] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[17702.696412] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17702.733991] ata1.00: configured for UDMA/133
[17702.755133] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[17703.958856] ieee80211 phy0: wl0: wlc_coreinit: ucode did not self-suspend!
[17704.105249] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.105262] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000001, psm_brc 0x0000
[17704.205020] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.205032] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17704.304804] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.304816] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000031, psm_brc 0x0000
[17704.404587] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.404599] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17704.425666] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[17704.512040] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.512057] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17704.618834] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.618848] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000031, psm_brc 0x0000
[17704.725580] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.725594] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17704.832371] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.832384] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17704.832438] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[17704.938901] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17704.938914] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17705.045912] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17705.045925] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17705.048106] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[17705.048119] ieee80211 phy0: brcms_ops_bss_info_changed: cqm change: threshold 0, hys 0 (implement)
[17705.048124] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[17705.048129] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[17705.048212] PM: resume of devices complete after 4858.707 msecs
[17705.051362] PM: Finishing wakeup.
[17705.051366] Restarting tasks ...
[17705.051959] usb 2-1: USB disconnect, device number 2
[17705.095166] done.
[17705.095185] video LNXVIDEO:00: Restoring backlight state
[17705.132095] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[17705.220156] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[17705.460775] usb 2-1: New USB device found, idVendor=064e, idProduct=d214
[17705.460788] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=4
[17705.460796] usb 2-1: Product: WebCam
[17705.460802] usb 2-1: Manufacturer: SuYin
[17705.460807] usb 2-1: SerialNumber: HF0319-M08C-OV01-VA-R01.00.00
[17705.469649] uvcvideo: Found UVC 1.00 device WebCam (064e:d214)
[17705.473399] input: WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input13
[17705.584164] usb 2-2: new high-speed USB device number 4 using ehci_hcd
[17705.734313] usb 2-2: New USB device found, idVendor=0bda, idProduct=0138
[17705.734327] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17705.734335] usb 2-2: Product: USB2.0-CRW
[17705.734341] usb 2-2: Manufacturer: Generic
[17705.734347] usb 2-2: SerialNumber: 20090516388200000
[17705.902344] usbcore: registered new interface driver uas
[17705.919327] Initializing USB Mass Storage driver...
[17705.919727] usbcore: registered new interface driver usb-storage
[17705.919734] USB Mass Storage support registered.
[17705.983391] usb 2-2: USB disconnect, device number 4
[17705.996080] scsi1 : usb-storage 2-2:1.0
[17705.998748] usbcore: registered new interface driver ums-realtek
[17708.918157] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17708.921948] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17709.416093] eth0: no IPv6 routers present
[17709.617016] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[17710.157791] ieee80211 phy0: wl0: wlc_coreinit: ucode did not self-suspend!
[17710.308369] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.310406] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000001, psm_brc 0x0000
[17710.413433] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.415657] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17710.518878] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.521286] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000031, psm_brc 0x0000
[17710.624622] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.627169] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17710.738591] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.741319] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17710.851695] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.854571] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17710.964871] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17710.967901] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17711.078537] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17711.081777] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000031, psm_brc 0x0000
[17711.085126] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[17711.088604] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[17711.199507] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17711.203034] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17711.314350] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[17711.318044] ieee80211 phy0: wl0: psmdebug 0x00ff84a8, phydebug 0x00000000, psm_brc 0x0000
[17711.325889] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17711.870662] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[17711.873311] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17712.403339] atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
[17712.405925] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17723.080316] eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: BCM4313 troubles and backtrace
2012-01-14 19:02 BCM4313 troubles and backtrace Джонатан Вашингтон
@ 2012-01-14 21:36 ` Джонатан Вашингтон
0 siblings, 0 replies; 2+ messages in thread
From: Джонатан Вашингтон @ 2012-01-14 21:36 UTC (permalink / raw)
To: linux-wireless
Here's a quick follow-up with some extra information.
The brcmsmac driver was working fairly well for a while. I began
transferring a large file over the connection (with rsync), and after
about 9MB, I got the following error:
ieee80211 phy0: brcms_c_prec_enq_head: No where to go, prec == 4
(repeated another 11 times)
at which point it claimed to transfer another ~200KB, but then I got:
ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
(repeated once more)
And nothing more was transferred and the connection was hung.
However, it maintained association to the AP and everything else about
the connection looked fine. The network mostly did not respond after
that, though I could occasionally get a ping through to other local
computers.
--
Jonathan
On 14 January 2012 14:02, Джонатан Вашингтон <dzhonw@mail.ru> wrote:
> I have a BCM4313 wireless card (14e4:4727) in an Acer Aspire One 722
> (dual core, 64bit).
>
> With my kernel's default brcmsmac driver, the system freezes after
> associating with an AP. With the wl driver, the card is not detected.
> With a bleeding edge brcmsmac driver, the system doesn't freeze, but
> connectivity drops out (while staying associated with the AP)
> frequently for long periods of time, allowing only a few KB of traffic
> with the network at a time.
>
> I get a number of warnings in dmesg and an *occasional* kernel
> backtrace. Below is a backtrace, and attached is a full dmesg, I
> believe from the same boot. You can see by the dmesg that I've tried
> a number of things; please ignore parts irrelevant to this issue.
>
>
>
> WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.2~rc7/debian/build/source_amd64_none/net/wireless/mlme.c:366
> cfg80211_send_assoc_timeout+0x103/0x105 [cfg80211]()
> Hardware name: AO722
> Modules linked in: cryptd aes_x86_64 aes_generic bcma(O) powernow_k8
> mperf cpufreq_powersave cpufreq_userspace cpufreq_conservative
> cpufreq_stats parport_pc ppdev lp parport binfmt_misc uinput fuse nfsd
> nfs lockd fscache auth_rpcgss nfs_acl sunrpc xfs ext2 loop joydev
> snd_hda_codec_conexant snd_hda_codec_hdmi uvcvideo videodev media
> v4l2_compat_ioctl32 ums_realtek usb_storage uas arc4 snd_hda_intel
> snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device
> radeon ttm sp5100_tco drm_kms_helper brcmsmac i2c_piix4 mac80211 drm
> acer_wmi brcmutil sparse_keymap ohci_hcd cfg80211 snd psmouse crc8
> ehci_hcd usbcore soundcore pcspkr cordic usb_common i2c_algo_bit
> serio_raw i2c_core k10temp evdev ac rfkill snd_page_alloc battery
> power_supply wmi button video processor thermal_sys ext4 mbcache jbd2
> crc16 sd_mod crc_t10dif ahci libahci libata scsi_mod [last unloaded:
> atl1c]
> Pid: 17725, comm: kworker/u:2 Tainted: G W O 3.2.0-rc7-amd64 #1
> Call Trace:
> [<ffffffff810457ed>] ? warn_slowpath_common+0x78/0x8c
> [<ffffffffa0204882>] ? cfg80211_send_assoc_timeout+0x103/0x105 [cfg80211]
> [<ffffffff81338d69>] ? __mutex_unlock_slowpath+0x29/0x2f
> [<ffffffffa0268244>] ? ieee80211_assoc_done+0x47/0x1a4 [mac80211]
> [<ffffffff8103f908>] ? select_task_rq_fair+0x39f/0x67e
> [<ffffffff810506e7>] ? usleep_range+0x3e/0x3e
> [<ffffffff8133984b>] ? _raw_spin_lock_bh+0xe/0x1c
> [<ffffffff81013509>] ? paravirt_read_tsc+0x5/0x8
> [<ffffffff81013965>] ? native_sched_clock+0x27/0x2f
> [<ffffffff81013972>] ? sched_clock+0x5/0x8
> [<ffffffff81062608>] ? sched_clock_local+0xd/0x6f
> [<ffffffff81026990>] ? _flat_send_IPI_mask+0x68/0x78
> [<ffffffff8103e3d3>] ? try_to_wake_up+0x187/0x197
> [<ffffffffa026a6ad>] ? ieee80211_work_work+0x1006/0x1065 [mac80211]
> [<ffffffff81036e14>] ? set_next_entity+0x32/0x55
> [<ffffffff8100d027>] ? load_TLS+0x7/0xa
> [<ffffffff8100d617>] ? __switch_to+0xc1/0x20e
> [<ffffffffa02696a7>] ? free_work+0xe/0xe [mac80211]
> [<ffffffff81059d95>] ? process_one_work+0x163/0x284
> [<ffffffff8105ad5d>] ? worker_thread+0xc2/0x145
> [<ffffffff8105ac9b>] ? manage_workers.isra.23+0x15b/0x15b
> [<ffffffff8105de99>] ? kthread+0x76/0x7e
> [<ffffffff813407f4>] ? kernel_thread_helper+0x4/0x10
> [<ffffffff8105de23>] ? kthread_worker_fn+0x139/0x139
> [<ffffffff813407f0>] ? gs_change+0x13/0x13
> ---[ end trace efce98d16f124c84 ]---
>
>
> --
> Jonathan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-01-14 21:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-14 19:02 BCM4313 troubles and backtrace Джонатан Вашингтон
2012-01-14 21:36 ` Джонатан Вашингтон
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.