* kernel panic: audit: backlog limit exceeded
@ 2020-02-24 8:18 ` syzbot
0 siblings, 0 replies; 21+ messages in thread
From: syzbot @ 2020-02-24 8:18 UTC (permalink / raw)
To: a, b.a.t.m.a.n, dan.carpenter, davem, eparis, fzago, gregkh,
john.hammond, linux-audit, linux-kernel, mareklindner, netdev,
paul, sw, syzkaller-bugs
Hello,
syzbot found the following crash on:
HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re..
git tree: net
console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000
kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16
dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000
The bug was bisected to:
commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri Jul 28 14:42:27 2017 +0000
staging: lustre: lustre: Off by two in lmv_fid2path()
bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000
final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000
console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com
Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()")
audit: audit_backlog=13 > audit_backlog_limit=7
audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7
Kernel panic - not syncing: audit: backlog limit exceeded
CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
audit_panic.cold+0x32/0x32 kernel/audit.c:307
audit_log_lost kernel/audit.c:377 [inline]
audit_log_lost+0x8b/0x180 kernel/audit.c:349
audit_log_start kernel/audit.c:1788 [inline]
audit_log_start+0x70e/0x7c0 kernel/audit.c:1745
audit_log+0x95/0x120 kernel/audit.c:2345
xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413
__do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084
do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline]
ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933
tcp_setsockopt net/ipv4/tcp.c:3165 [inline]
tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159
sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149
__sys_setsockopt+0x261/0x4c0 net/socket.c:2130
__do_sys_setsockopt net/socket.c:2146 [inline]
__se_sys_setsockopt net/socket.c:2143 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x44720a
Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00
RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000
R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0
R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0
Kernel Offset: disabled
Rebooting in 86400 seconds..
---
This bug is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this bug report. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
For information about bisection process see: https://goo.gl/tpsmEJ#bisection
syzbot can test patches for this bug, for details see:
https://goo.gl/tpsmEJ#testing-patches
^ permalink raw reply [flat|nested] 21+ messages in thread* kernel panic: audit: backlog limit exceeded @ 2020-02-24 8:18 ` syzbot 0 siblings, 0 replies; 21+ messages in thread From: syzbot @ 2020-02-24 8:18 UTC (permalink / raw) To: a, b.a.t.m.a.n, dan.carpenter, davem, eparis, fzago, gregkh, john.hammond, linux-audit, linux-kernel, mareklindner, netdev, paul, sw, syzkaller-bugs Hello, syzbot found the following crash on: HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re.. git tree: net console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 compiler: gcc (GCC) 9.0.0 20181231 (experimental) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 The bug was bisected to: commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d Author: Dan Carpenter <dan.carpenter@oracle.com> Date: Fri Jul 28 14:42:27 2017 +0000 staging: lustre: lustre: Off by two in lmv_fid2path() bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()") audit: audit_backlog=13 > audit_backlog_limit=7 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 Kernel panic - not syncing: audit: backlog limit exceeded CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 audit_panic.cold+0x32/0x32 kernel/audit.c:307 audit_log_lost kernel/audit.c:377 [inline] audit_log_lost+0x8b/0x180 kernel/audit.c:349 audit_log_start kernel/audit.c:1788 [inline] audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 audit_log+0x95/0x120 kernel/audit.c:2345 xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 tcp_setsockopt net/ipv4/tcp.c:3165 [inline] tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44720a Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 Kernel Offset: disabled Rebooting in 86400 seconds.. --- This bug is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller@googlegroups.com. syzbot will keep track of this bug report. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. For information about bisection process see: https://goo.gl/tpsmEJ#bisection syzbot can test patches for this bug, for details see: https://goo.gl/tpsmEJ#testing-patches -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:38 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-24 22:38 UTC (permalink / raw) To: syzbot Cc: a, b.a.t.m.a.n, dan.carpenter, davem, Eric Paris, fzago, gregkh, john.hammond, linux-audit, linux-kernel, mareklindner, netdev, sw, syzkaller-bugs On Mon, Feb 24, 2020 at 3:18 AM syzbot <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > Hello, > > syzbot found the following crash on: > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re.. > git tree: net > console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > The bug was bisected to: > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > Author: Dan Carpenter <dan.carpenter@oracle.com> > Date: Fri Jul 28 14:42:27 2017 +0000 > > staging: lustre: lustre: Off by two in lmv_fid2path() > > bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > IMPORTANT: if you fix the bug, please add the following tag to the commit: > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()") > > audit: audit_backlog=13 > audit_backlog_limit=7 > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > Kernel panic - not syncing: audit: backlog limit exceeded > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 > Call Trace: > __dump_stack lib/dump_stack.c:77 [inline] > dump_stack+0x197/0x210 lib/dump_stack.c:118 > panic+0x2e3/0x75c kernel/panic.c:221 > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > audit_log_lost kernel/audit.c:377 [inline] > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > audit_log_start kernel/audit.c:1788 [inline] > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > audit_log+0x95/0x120 kernel/audit.c:2345 > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > __do_sys_setsockopt net/socket.c:2146 [inline] > __se_sys_setsockopt net/socket.c:2143 [inline] > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > RIP: 0033:0x44720a > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036 > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > Kernel Offset: disabled > Rebooting in 86400 seconds.. > > > --- > This bug is generated by a bot. It may contain errors. > See https://goo.gl/tpsmEJ for more information about syzbot. > syzbot engineers can be reached at syzkaller@googlegroups.com. > > syzbot will keep track of this bug report. See: > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > For information about bisection process see: https://goo.gl/tpsmEJ#bisection > syzbot can test patches for this bug, for details see: > https://goo.gl/tpsmEJ#testing-patches Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:38 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-24 22:38 UTC (permalink / raw) To: syzbot Cc: mareklindner, sw, gregkh, a, linux-kernel, syzkaller-bugs, b.a.t.m.a.n, linux-audit, netdev, john.hammond, fzago, davem, dan.carpenter On Mon, Feb 24, 2020 at 3:18 AM syzbot <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > Hello, > > syzbot found the following crash on: > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re.. > git tree: net > console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > The bug was bisected to: > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > Author: Dan Carpenter <dan.carpenter@oracle.com> > Date: Fri Jul 28 14:42:27 2017 +0000 > > staging: lustre: lustre: Off by two in lmv_fid2path() > > bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > IMPORTANT: if you fix the bug, please add the following tag to the commit: > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()") > > audit: audit_backlog=13 > audit_backlog_limit=7 > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > Kernel panic - not syncing: audit: backlog limit exceeded > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 > Call Trace: > __dump_stack lib/dump_stack.c:77 [inline] > dump_stack+0x197/0x210 lib/dump_stack.c:118 > panic+0x2e3/0x75c kernel/panic.c:221 > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > audit_log_lost kernel/audit.c:377 [inline] > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > audit_log_start kernel/audit.c:1788 [inline] > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > audit_log+0x95/0x120 kernel/audit.c:2345 > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > __do_sys_setsockopt net/socket.c:2146 [inline] > __se_sys_setsockopt net/socket.c:2143 [inline] > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > RIP: 0033:0x44720a > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036 > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > Kernel Offset: disabled > Rebooting in 86400 seconds.. > > > --- > This bug is generated by a bot. It may contain errors. > See https://goo.gl/tpsmEJ for more information about syzbot. > syzbot engineers can be reached at syzkaller@googlegroups.com. > > syzbot will keep track of this bug report. See: > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > For information about bisection process see: https://goo.gl/tpsmEJ#bisection > syzbot can test patches for this bug, for details see: > https://goo.gl/tpsmEJ#testing-patches Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. -- paul moore www.paul-moore.com -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-02-24 22:38 ` Paul Moore (?) @ 2020-02-24 22:43 ` Eric Paris -1 siblings, 0 replies; 21+ messages in thread From: Eric Paris @ 2020-02-24 22:43 UTC (permalink / raw) To: Paul Moore, syzbot Cc: a, b.a.t.m.a.n, dan.carpenter, davem, fzago, gregkh, john.hammond, linux-audit, linux-kernel, mareklindner, netdev, sw, syzkaller-bugs https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the reproducer listed) looks like it is literally fuzzing the AUDIT_SET. Which seems like this is working as designed if it is setting the failure mode to 2. On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > On Mon, Feb 24, 2020 at 3:18 AM syzbot > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > Hello, > > > > syzbot found the following crash on: > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > kdump-re.. > > git tree: net > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > kernel config: > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > dashboard link: > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > syz repro: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > C reproducer: > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > The bug was bisected to: > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > bisection log: > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > final crash: > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > commit: > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > lmv_fid2path()") > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > Kernel panic - not syncing: audit: backlog limit exceeded > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > syzkaller #0 > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > BIOS Google 01/01/2011 > > Call Trace: > > __dump_stack lib/dump_stack.c:77 [inline] > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > panic+0x2e3/0x75c kernel/panic.c:221 > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > audit_log_lost kernel/audit.c:377 [inline] > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > audit_log_start kernel/audit.c:1788 [inline] > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > audit_log+0x95/0x120 kernel/audit.c:2345 > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > __do_sys_setsockopt net/socket.c:2146 [inline] > > __se_sys_setsockopt net/socket.c:2143 [inline] > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > RIP: 0033:0x44720a > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > 0000000000000036 > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > Kernel Offset: disabled > > Rebooting in 86400 seconds.. > > > > > > --- > > This bug is generated by a bot. It may contain errors. > > See https://goo.gl/tpsmEJ for more information about syzbot. > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > syzbot will keep track of this bug report. See: > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > For information about bisection process see: > > https://goo.gl/tpsmEJ#bisection > > syzbot can test patches for this bug, for details see: > > https://goo.gl/tpsmEJ#testing-patches > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:43 ` Eric Paris 0 siblings, 0 replies; 21+ messages in thread From: Eric Paris @ 2020-02-24 22:43 UTC (permalink / raw) To: Paul Moore, syzbot Cc: mareklindner, sw, gregkh, a, linux-kernel, syzkaller-bugs, b.a.t.m.a.n, linux-audit, netdev, john.hammond, fzago, davem, dan.carpenter https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the reproducer listed) looks like it is literally fuzzing the AUDIT_SET. Which seems like this is working as designed if it is setting the failure mode to 2. On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > On Mon, Feb 24, 2020 at 3:18 AM syzbot > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > Hello, > > > > syzbot found the following crash on: > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > kdump-re.. > > git tree: net > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > kernel config: > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > dashboard link: > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > syz repro: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > C reproducer: > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > The bug was bisected to: > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > bisection log: > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > final crash: > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > commit: > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > lmv_fid2path()") > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > Kernel panic - not syncing: audit: backlog limit exceeded > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > syzkaller #0 > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > BIOS Google 01/01/2011 > > Call Trace: > > __dump_stack lib/dump_stack.c:77 [inline] > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > panic+0x2e3/0x75c kernel/panic.c:221 > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > audit_log_lost kernel/audit.c:377 [inline] > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > audit_log_start kernel/audit.c:1788 [inline] > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > audit_log+0x95/0x120 kernel/audit.c:2345 > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > __do_sys_setsockopt net/socket.c:2146 [inline] > > __se_sys_setsockopt net/socket.c:2143 [inline] > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > RIP: 0033:0x44720a > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > 0000000000000036 > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > Kernel Offset: disabled > > Rebooting in 86400 seconds.. > > > > > > --- > > This bug is generated by a bot. It may contain errors. > > See https://goo.gl/tpsmEJ for more information about syzbot. > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > syzbot will keep track of this bug report. See: > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > For information about bisection process see: > > https://goo.gl/tpsmEJ#bisection > > syzbot can test patches for this bug, for details see: > > https://goo.gl/tpsmEJ#testing-patches > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. > -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:43 ` Eric Paris 0 siblings, 0 replies; 21+ messages in thread From: Eric Paris @ 2020-02-24 22:43 UTC (permalink / raw) To: Paul Moore, syzbot Cc: mareklindner, sw, gregkh, a, linux-kernel, syzkaller-bugs, b.a.t.m.a.n, linux-audit, netdev, john.hammond, fzago, davem, dan.carpenter https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the reproducer listed) looks like it is literally fuzzing the AUDIT_SET. Which seems like this is working as designed if it is setting the failure mode to 2. On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > On Mon, Feb 24, 2020 at 3:18 AM syzbot > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > Hello, > > > > syzbot found the following crash on: > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > kdump-re.. > > git tree: net > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > kernel config: > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > dashboard link: > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > syz repro: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > C reproducer: > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > The bug was bisected to: > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > bisection log: > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > final crash: > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > console output: > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > commit: > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > lmv_fid2path()") > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > Kernel panic - not syncing: audit: backlog limit exceeded > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > syzkaller #0 > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > BIOS Google 01/01/2011 > > Call Trace: > > __dump_stack lib/dump_stack.c:77 [inline] > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > panic+0x2e3/0x75c kernel/panic.c:221 > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > audit_log_lost kernel/audit.c:377 [inline] > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > audit_log_start kernel/audit.c:1788 [inline] > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > audit_log+0x95/0x120 kernel/audit.c:2345 > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > __do_sys_setsockopt net/socket.c:2146 [inline] > > __se_sys_setsockopt net/socket.c:2143 [inline] > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > RIP: 0033:0x44720a > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > 0000000000000036 > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > Kernel Offset: disabled > > Rebooting in 86400 seconds.. > > > > > > --- > > This bug is generated by a bot. It may contain errors. > > See https://goo.gl/tpsmEJ for more information about syzbot. > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > syzbot will keep track of this bug report. See: > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > For information about bisection process see: > > https://goo.gl/tpsmEJ#bisection > > syzbot can test patches for this bug, for details see: > > https://goo.gl/tpsmEJ#testing-patches > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:46 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-24 22:46 UTC (permalink / raw) To: Eric Paris Cc: syzbot, a, b.a.t.m.a.n, dan.carpenter, davem, fzago, gregkh, john.hammond, linux-audit, linux-kernel, mareklindner, netdev, sw, syzkaller-bugs On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > Which seems like this is working as designed if it is setting the > failure mode to 2. So it is, good catch :) I saw the panic and instinctively chalked that up to a mistaken config, not expecting that it was what was being tested. > On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > > On Mon, Feb 24, 2020 at 3:18 AM syzbot > > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > > Hello, > > > > > > syzbot found the following crash on: > > > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > > kdump-re.. > > > git tree: net > > > console output: > > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > > kernel config: > > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > > dashboard link: > > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > > syz repro: > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > > C reproducer: > > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > > > The bug was bisected to: > > > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > > > bisection log: > > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > > final crash: > > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > > console output: > > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > > commit: > > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > > lmv_fid2path()") > > > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > > Kernel panic - not syncing: audit: backlog limit exceeded > > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > > syzkaller #0 > > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > > BIOS Google 01/01/2011 > > > Call Trace: > > > __dump_stack lib/dump_stack.c:77 [inline] > > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > > panic+0x2e3/0x75c kernel/panic.c:221 > > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > > audit_log_lost kernel/audit.c:377 [inline] > > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > > audit_log_start kernel/audit.c:1788 [inline] > > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > > audit_log+0x95/0x120 kernel/audit.c:2345 > > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > > __do_sys_setsockopt net/socket.c:2146 [inline] > > > __se_sys_setsockopt net/socket.c:2143 [inline] > > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > > RIP: 0033:0x44720a > > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > > 0000000000000036 > > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > > Kernel Offset: disabled > > > Rebooting in 86400 seconds.. > > > > > > > > > --- > > > This bug is generated by a bot. It may contain errors. > > > See https://goo.gl/tpsmEJ for more information about syzbot. > > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > > > syzbot will keep track of this bug report. See: > > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > For information about bisection process see: > > > https://goo.gl/tpsmEJ#bisection > > > syzbot can test patches for this bug, for details see: > > > https://goo.gl/tpsmEJ#testing-patches > > > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. > > > -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-24 22:46 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-24 22:46 UTC (permalink / raw) To: Eric Paris Cc: mareklindner, sw, gregkh, a, linux-kernel, davem, syzkaller-bugs, b.a.t.m.a.n, linux-audit, netdev, john.hammond, fzago, syzbot, dan.carpenter On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > Which seems like this is working as designed if it is setting the > failure mode to 2. So it is, good catch :) I saw the panic and instinctively chalked that up to a mistaken config, not expecting that it was what was being tested. > On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > > On Mon, Feb 24, 2020 at 3:18 AM syzbot > > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > > Hello, > > > > > > syzbot found the following crash on: > > > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > > kdump-re.. > > > git tree: net > > > console output: > > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > > kernel config: > > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > > dashboard link: > > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > > syz repro: > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > > C reproducer: > > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > > > The bug was bisected to: > > > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > > > bisection log: > > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > > final crash: > > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > > console output: > > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > > commit: > > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > > lmv_fid2path()") > > > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > > Kernel panic - not syncing: audit: backlog limit exceeded > > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > > syzkaller #0 > > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > > BIOS Google 01/01/2011 > > > Call Trace: > > > __dump_stack lib/dump_stack.c:77 [inline] > > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > > panic+0x2e3/0x75c kernel/panic.c:221 > > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > > audit_log_lost kernel/audit.c:377 [inline] > > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > > audit_log_start kernel/audit.c:1788 [inline] > > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > > audit_log+0x95/0x120 kernel/audit.c:2345 > > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > > __do_sys_setsockopt net/socket.c:2146 [inline] > > > __se_sys_setsockopt net/socket.c:2143 [inline] > > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > > RIP: 0033:0x44720a > > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > > 0000000000000036 > > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > > Kernel Offset: disabled > > > Rebooting in 86400 seconds.. > > > > > > > > > --- > > > This bug is generated by a bot. It may contain errors. > > > See https://goo.gl/tpsmEJ for more information about syzbot. > > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > > > syzbot will keep track of this bug report. See: > > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > For information about bisection process see: > > > https://goo.gl/tpsmEJ#bisection > > > syzbot can test patches for this bug, for details see: > > > https://goo.gl/tpsmEJ#testing-patches > > > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. > > > -- paul moore www.paul-moore.com -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
[parent not found: <CAHC9VhQnbdJprbdTa_XcgUJaiwhzbnGMWJqHczU54UMk0AFCtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* (unknown) [not found] ` <CAHC9VhQnbdJprbdTa_XcgUJaiwhzbnGMWJqHczU54UMk0AFCtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2020-02-27 15:39 ` Dmitry Vyukov via B.A.T.M.A.N 0 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov via B.A.T.M.A.N @ 2020-02-27 15:39 UTC (permalink / raw) To: Paul Moore, Tetsuo Handa Cc: Dmitry Vyukov, mareklindner-rVWd3aGhH2z5bpWLKbzFeg, Greg Kroah-Hartman, b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r, a, LKML, Eric Paris, David Miller, syzkaller-bugs, linux-audit-H+wXaHxf7aLQT0dZR+AlfA, syzkaller, netdev, john.hammond-ral2JQCrhuEAvxtiuMwx3w, fzago-WVYJKLFxKCc, syzbot, Dan Carpenter [-- Attachment #1: Type: text/plain, Size: 243 bytes --] The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. [-- Attachment #2: Type: message/rfc822, Size: 11958 bytes --] From: Dmitry Vyukov <dvyukov-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> To: Paul Moore <paul-r2n+y4ga6xFZroRs9YW3xA@public.gmane.org>, Tetsuo Handa <penguin-kernel-1yMVhJb1mP/7nzcFbJAaVXf5DAMn2ifp@public.gmane.org> Cc: Eric Paris <eparis-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>, syzbot <syzbot+9a5e789e4725b9ef1316-Pl5Pbv+GP7P466ipTTIvnc23WoclnBCfAL8bYrjMMd8@public.gmane.org>, a@unstable.cc, b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r@public.gmane.org, Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>, David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>, fzago-WVYJKLFxKCc@public.gmane.org, Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>, john.hammond-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, linux-audit-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org, LKML <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, mareklindner-rVWd3aGhH2z5bpWLKbzFeg@public.gmane.org, netdev <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org, syzkaller-bugs <syzkaller-bugs-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>, syzkaller <syzkaller-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org> Subject: Re: kernel panic: audit: backlog limit exceeded Date: Thu, 27 Feb 2020 16:39:59 +0100 Message-ID: <CACT4Y+azQXLcPqtJG9zbj8hxqw4jE3dcwUj5T06bdL3uMaZk+Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul-r2n+y4ga6xFZroRs9YW3xA@public.gmane.org> wrote: > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > Which seems like this is working as designed if it is setting the > > failure mode to 2. > > So it is, good catch :) I saw the panic and instinctively chalked > that up to a mistaken config, not expecting that it was what was being > tested. Yes, this audit failure mode is quite unpleasant for fuzzing. And since this is not a top-level syscall argument value, it's effectively impossible to filter out in the fuzzer. Maybe another use case for the "fuzer lockdown" feature +Tetsuo proposed. With the current state of the things, I think we only have an option to disable fuzzing of audit. Which is pity because it has found 5 or so real bugs in audit too. But this happened anyway because audit is only reachable from init pid namespace and syzkaller always unshares pid namespace for sandboxing reasons, that was removed accidentally and that's how it managed to find the bugs. But the unshare is restored now: https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c As a side effect all other real bugs in audit will be auto-obsoleted in future if not fixed because they will stop happening. #syz invalid > > On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > > > On Mon, Feb 24, 2020 at 3:18 AM syzbot > > > <syzbot+9a5e789e4725b9ef1316-Pl5Pbv+GP7P466ipTTIvnc23WoclnBCfAL8bYrjMMd8@public.gmane.org> wrote: > > > > Hello, > > > > > > > > syzbot found the following crash on: > > > > > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > > > kdump-re.. > > > > git tree: net > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > > > kernel config: > > > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > > > dashboard link: > > > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > > > syz repro: > > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > > > C reproducer: > > > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > > > > > The bug was bisected to: > > > > > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > > > Author: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> > > > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > > > > > bisection log: > > > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > > > final crash: > > > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > > > commit: > > > > Reported-by: syzbot+9a5e789e4725b9ef1316-Pl5Pbv+GP7P466ipTTIvnc23WoclnBCfAL8bYrjMMd8@public.gmane.org > > > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > > > lmv_fid2path()") > > > > > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > > > Kernel panic - not syncing: audit: backlog limit exceeded > > > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > > > syzkaller #0 > > > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > > > BIOS Google 01/01/2011 > > > > Call Trace: > > > > __dump_stack lib/dump_stack.c:77 [inline] > > > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > > > panic+0x2e3/0x75c kernel/panic.c:221 > > > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > > > audit_log_lost kernel/audit.c:377 [inline] > > > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > > > audit_log_start kernel/audit.c:1788 [inline] > > > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > > > audit_log+0x95/0x120 kernel/audit.c:2345 > > > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > > > __do_sys_setsockopt net/socket.c:2146 [inline] > > > > __se_sys_setsockopt net/socket.c:2143 [inline] > > > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > > > RIP: 0033:0x44720a > > > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > > > 0000000000000036 > > > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > > > Kernel Offset: disabled > > > > Rebooting in 86400 seconds.. > > > > > > > > > > > > --- > > > > This bug is generated by a bot. It may contain errors. > > > > See https://goo.gl/tpsmEJ for more information about syzbot. > > > > syzbot engineers can be reached at syzkaller-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org > > > > > > > > syzbot will keep track of this bug report. See: > > > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > > For information about bisection process see: > > > > https://goo.gl/tpsmEJ#bisection > > > > syzbot can test patches for this bug, for details see: > > > > https://goo.gl/tpsmEJ#testing-patches > > > > > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-27 15:39 ` Dmitry Vyukov 0 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov @ 2020-02-27 15:39 UTC (permalink / raw) To: Paul Moore, Tetsuo Handa Cc: Eric Paris, syzbot, a, b.a.t.m.a.n, Dan Carpenter, David Miller, fzago, Greg Kroah-Hartman, john.hammond, linux-audit, LKML, mareklindner, netdev, sw, syzkaller-bugs, syzkaller On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > Which seems like this is working as designed if it is setting the > > failure mode to 2. > > So it is, good catch :) I saw the panic and instinctively chalked > that up to a mistaken config, not expecting that it was what was being > tested. Yes, this audit failure mode is quite unpleasant for fuzzing. And since this is not a top-level syscall argument value, it's effectively impossible to filter out in the fuzzer. Maybe another use case for the "fuzer lockdown" feature +Tetsuo proposed. With the current state of the things, I think we only have an option to disable fuzzing of audit. Which is pity because it has found 5 or so real bugs in audit too. But this happened anyway because audit is only reachable from init pid namespace and syzkaller always unshares pid namespace for sandboxing reasons, that was removed accidentally and that's how it managed to find the bugs. But the unshare is restored now: https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c As a side effect all other real bugs in audit will be auto-obsoleted in future if not fixed because they will stop happening. #syz invalid > > On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > > > On Mon, Feb 24, 2020 at 3:18 AM syzbot > > > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > > > Hello, > > > > > > > > syzbot found the following crash on: > > > > > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > > > kdump-re.. > > > > git tree: net > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > > > kernel config: > > > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > > > dashboard link: > > > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > > > syz repro: > > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > > > C reproducer: > > > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > > > > > The bug was bisected to: > > > > > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > > > > > bisection log: > > > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > > > final crash: > > > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > > > commit: > > > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > > > lmv_fid2path()") > > > > > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > > > Kernel panic - not syncing: audit: backlog limit exceeded > > > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > > > syzkaller #0 > > > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > > > BIOS Google 01/01/2011 > > > > Call Trace: > > > > __dump_stack lib/dump_stack.c:77 [inline] > > > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > > > panic+0x2e3/0x75c kernel/panic.c:221 > > > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > > > audit_log_lost kernel/audit.c:377 [inline] > > > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > > > audit_log_start kernel/audit.c:1788 [inline] > > > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > > > audit_log+0x95/0x120 kernel/audit.c:2345 > > > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > > > __do_sys_setsockopt net/socket.c:2146 [inline] > > > > __se_sys_setsockopt net/socket.c:2143 [inline] > > > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > > > RIP: 0033:0x44720a > > > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > > > 0000000000000036 > > > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > > > Kernel Offset: disabled > > > > Rebooting in 86400 seconds.. > > > > > > > > > > > > --- > > > > This bug is generated by a bot. It may contain errors. > > > > See https://goo.gl/tpsmEJ for more information about syzbot. > > > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > > > > > syzbot will keep track of this bug report. See: > > > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > > For information about bisection process see: > > > > https://goo.gl/tpsmEJ#bisection > > > > syzbot can test patches for this bug, for details see: > > > > https://goo.gl/tpsmEJ#testing-patches > > > > > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-27 15:39 ` Dmitry Vyukov 0 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov @ 2020-02-27 15:39 UTC (permalink / raw) To: Paul Moore, Tetsuo Handa Cc: mareklindner, sw, Greg Kroah-Hartman, a, LKML, David Miller, syzkaller-bugs, b.a.t.m.a.n, linux-audit, syzkaller, netdev, john.hammond, fzago, syzbot, Dan Carpenter On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > Which seems like this is working as designed if it is setting the > > failure mode to 2. > > So it is, good catch :) I saw the panic and instinctively chalked > that up to a mistaken config, not expecting that it was what was being > tested. Yes, this audit failure mode is quite unpleasant for fuzzing. And since this is not a top-level syscall argument value, it's effectively impossible to filter out in the fuzzer. Maybe another use case for the "fuzer lockdown" feature +Tetsuo proposed. With the current state of the things, I think we only have an option to disable fuzzing of audit. Which is pity because it has found 5 or so real bugs in audit too. But this happened anyway because audit is only reachable from init pid namespace and syzkaller always unshares pid namespace for sandboxing reasons, that was removed accidentally and that's how it managed to find the bugs. But the unshare is restored now: https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c As a side effect all other real bugs in audit will be auto-obsoleted in future if not fixed because they will stop happening. #syz invalid > > On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote: > > > On Mon, Feb 24, 2020 at 3:18 AM syzbot > > > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote: > > > > Hello, > > > > > > > > syzbot found the following crash on: > > > > > > > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec- > > > > kdump-re.. > > > > git tree: net > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000 > > > > kernel config: > > > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16 > > > > dashboard link: > > > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316 > > > > compiler: gcc (GCC) 9.0.0 20181231 (experimental) > > > > syz repro: > > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 > > > > C reproducer: > > > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000 > > > > > > > > The bug was bisected to: > > > > > > > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d > > > > Author: Dan Carpenter <dan.carpenter@oracle.com> > > > > Date: Fri Jul 28 14:42:27 2017 +0000 > > > > > > > > staging: lustre: lustre: Off by two in lmv_fid2path() > > > > > > > > bisection log: > > > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000 > > > > final crash: > > > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000 > > > > console output: > > > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000 > > > > > > > > IMPORTANT: if you fix the bug, please add the following tag to the > > > > commit: > > > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com > > > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in > > > > lmv_fid2path()") > > > > > > > > audit: audit_backlog=13 > audit_backlog_limit=7 > > > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7 > > > > Kernel panic - not syncing: audit: backlog limit exceeded > > > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1- > > > > syzkaller #0 > > > > Hardware name: Google Google Compute Engine/Google Compute Engine, > > > > BIOS Google 01/01/2011 > > > > Call Trace: > > > > __dump_stack lib/dump_stack.c:77 [inline] > > > > dump_stack+0x197/0x210 lib/dump_stack.c:118 > > > > panic+0x2e3/0x75c kernel/panic.c:221 > > > > audit_panic.cold+0x32/0x32 kernel/audit.c:307 > > > > audit_log_lost kernel/audit.c:377 [inline] > > > > audit_log_lost+0x8b/0x180 kernel/audit.c:349 > > > > audit_log_start kernel/audit.c:1788 [inline] > > > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745 > > > > audit_log+0x95/0x120 kernel/audit.c:2345 > > > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413 > > > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084 > > > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] > > > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681 > > > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] > > > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115 > > > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline] > > > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933 > > > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline] > > > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159 > > > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 > > > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 > > > > __do_sys_setsockopt net/socket.c:2146 [inline] > > > > __se_sys_setsockopt net/socket.c:2143 [inline] > > > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 > > > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 > > > > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > > > RIP: 0033:0x44720a > > > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 > > > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 > > > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00 > > > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: > > > > 0000000000000036 > > > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a > > > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 > > > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000 > > > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0 > > > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0 > > > > Kernel Offset: disabled > > > > Rebooting in 86400 seconds.. > > > > > > > > > > > > --- > > > > This bug is generated by a bot. It may contain errors. > > > > See https://goo.gl/tpsmEJ for more information about syzbot. > > > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > > > > > syzbot will keep track of this bug report. See: > > > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > > For information about bisection process see: > > > > https://goo.gl/tpsmEJ#bisection > > > > syzbot can test patches for this bug, for details see: > > > > https://goo.gl/tpsmEJ#testing-patches > > > > > > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there. -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-28 0:14 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-28 0:14 UTC (permalink / raw) To: Dmitry Vyukov Cc: Tetsuo Handa, Eric Paris, syzbot, a, b.a.t.m.a.n, Dan Carpenter, David Miller, fzago, Greg Kroah-Hartman, john.hammond, linux-audit, LKML, mareklindner, netdev, sw, syzkaller-bugs, syzkaller On Thu, Feb 27, 2020 at 10:40 AM Dmitry Vyukov <dvyukov@google.com> wrote: > On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > > Which seems like this is working as designed if it is setting the > > > failure mode to 2. > > > > So it is, good catch :) I saw the panic and instinctively chalked > > that up to a mistaken config, not expecting that it was what was being > > tested. > > Yes, this audit failure mode is quite unpleasant for fuzzing. And > since this is not a top-level syscall argument value, it's effectively > impossible to filter out in the fuzzer. Maybe another use case for the > "fuzer lockdown" feature +Tetsuo proposed. > With the current state of the things, I think we only have an option > to disable fuzzing of audit. Which is pity because it has found 5 or > so real bugs in audit too. > But this happened anyway because audit is only reachable from init pid > namespace and syzkaller always unshares pid namespace for sandboxing > reasons, that was removed accidentally and that's how it managed to > find the bugs. But the unshare is restored now: > https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c > > As a side effect all other real bugs in audit will be auto-obsoleted > in future if not fixed because they will stop happening. On the plus side, I did submit fixes for the other real audit bugs that syzbot found recently and Linus pulled them into the tree today so at least we have that small victory. We could consider adding a fuzz-friendly build time config which would disable the panic failsafe, but it probably isn't worth it at the moment considering the syzbot's pid namespace limitations. -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-02-28 0:14 ` Paul Moore 0 siblings, 0 replies; 21+ messages in thread From: Paul Moore @ 2020-02-28 0:14 UTC (permalink / raw) To: Dmitry Vyukov Cc: mareklindner, sw, Greg Kroah-Hartman, a, LKML, David Miller, syzkaller-bugs, b.a.t.m.a.n, linux-audit, syzkaller, netdev, john.hammond, fzago, syzbot, Dan Carpenter On Thu, Feb 27, 2020 at 10:40 AM Dmitry Vyukov <dvyukov@google.com> wrote: > On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > > Which seems like this is working as designed if it is setting the > > > failure mode to 2. > > > > So it is, good catch :) I saw the panic and instinctively chalked > > that up to a mistaken config, not expecting that it was what was being > > tested. > > Yes, this audit failure mode is quite unpleasant for fuzzing. And > since this is not a top-level syscall argument value, it's effectively > impossible to filter out in the fuzzer. Maybe another use case for the > "fuzer lockdown" feature +Tetsuo proposed. > With the current state of the things, I think we only have an option > to disable fuzzing of audit. Which is pity because it has found 5 or > so real bugs in audit too. > But this happened anyway because audit is only reachable from init pid > namespace and syzkaller always unshares pid namespace for sandboxing > reasons, that was removed accidentally and that's how it managed to > find the bugs. But the unshare is restored now: > https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c > > As a side effect all other real bugs in audit will be auto-obsoleted > in future if not fixed because they will stop happening. On the plus side, I did submit fixes for the other real audit bugs that syzbot found recently and Linus pulled them into the tree today so at least we have that small victory. We could consider adding a fuzz-friendly build time config which would disable the panic failsafe, but it probably isn't worth it at the moment considering the syzbot's pid namespace limitations. -- paul moore www.paul-moore.com -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-02-28 0:14 ` Paul Moore (?) @ 2020-02-28 10:03 ` Tetsuo Handa 2020-02-28 13:08 ` Paul Moore -1 siblings, 1 reply; 21+ messages in thread From: Tetsuo Handa @ 2020-02-28 10:03 UTC (permalink / raw) To: Paul Moore; +Cc: Dmitry Vyukov, syzbot, LKML, syzkaller-bugs, syzkaller On 2020/02/28 9:14, Paul Moore wrote: > We could consider adding a fuzz-friendly build time config which would > disable the panic failsafe, but it probably isn't worth it at the > moment considering the syzbot's pid namespace limitations. > I think adding a fuzz-friendly build time config does worth. For example, we have locations where printk() emits "BUG:" or "WARNING:" and fuzzer misunderstands that a crash occurred. PID namespace is irrelevant. I proposed one at https://lkml.kernel.org/r/20191216095955.9886-1-penguin-kernel@I-love.SAKURA.ne.jp . I appreciate your response. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-02-28 10:03 ` Tetsuo Handa @ 2020-02-28 13:08 ` Paul Moore 2020-03-02 8:47 ` Dmitry Vyukov 0 siblings, 1 reply; 21+ messages in thread From: Paul Moore @ 2020-02-28 13:08 UTC (permalink / raw) To: Tetsuo Handa; +Cc: Dmitry Vyukov, syzbot, LKML, syzkaller-bugs, syzkaller On Fri, Feb 28, 2020 at 5:03 AM Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > On 2020/02/28 9:14, Paul Moore wrote: > > We could consider adding a fuzz-friendly build time config which would > > disable the panic failsafe, but it probably isn't worth it at the > > moment considering the syzbot's pid namespace limitations. > > I think adding a fuzz-friendly build time config does worth. For example, > we have locations where printk() emits "BUG:" or "WARNING:" and fuzzer > misunderstands that a crash occurred. PID namespace is irrelevant. > I proposed one at > https://lkml.kernel.org/r/20191216095955.9886-1-penguin-kernel@I-love.SAKURA.ne.jp . > I appreciate your response. To be clear, I was talking specifically about the intentional panic in audit_panic(). It is different from every other panic I've ever seen (perhaps there are others?) in that it doesn't indicate a serious error condition in the kernel, it indicates that audit records were dropped. It seems extreme to most people, but some use cases require that the system panic rather than lose audit records. My suggestion was that we could introduce a Kconfig build flag that syzbot (and other fuzzers) could use to make the AUDIT_FAIL_PANIC case in audit_panic() less panicky. However, as syzbot isn't currently able to test the kernel's audit code due to it's pid namespace restrictions, it doesn't make much sense to add this capability. If syzbot removes that restriction, or when we get to the point that we support multiple audit daemons, we can revisit this. -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-02-28 13:08 ` Paul Moore @ 2020-03-02 8:47 ` Dmitry Vyukov 2020-03-02 13:43 ` Paul Moore 0 siblings, 1 reply; 21+ messages in thread From: Dmitry Vyukov @ 2020-03-02 8:47 UTC (permalink / raw) To: Paul Moore; +Cc: Tetsuo Handa, syzbot, LKML, syzkaller-bugs, syzkaller On Fri, Feb 28, 2020 at 2:09 PM Paul Moore <paul@paul-moore.com> wrote: > > On Fri, Feb 28, 2020 at 5:03 AM Tetsuo Handa > <penguin-kernel@i-love.sakura.ne.jp> wrote: > > On 2020/02/28 9:14, Paul Moore wrote: > > > We could consider adding a fuzz-friendly build time config which would > > > disable the panic failsafe, but it probably isn't worth it at the > > > moment considering the syzbot's pid namespace limitations. > > > > I think adding a fuzz-friendly build time config does worth. For example, > > we have locations where printk() emits "BUG:" or "WARNING:" and fuzzer > > misunderstands that a crash occurred. PID namespace is irrelevant. > > I proposed one at > > https://lkml.kernel.org/r/20191216095955.9886-1-penguin-kernel@I-love.SAKURA.ne.jp . > > I appreciate your response. > > To be clear, I was talking specifically about the intentional panic in > audit_panic(). It is different from every other panic I've ever seen > (perhaps there are others?) in that it doesn't indicate a serious > error condition in the kernel, it indicates that audit records were > dropped. It seems extreme to most people, but some use cases require > that the system panic rather than lose audit records. > > My suggestion was that we could introduce a Kconfig build flag that > syzbot (and other fuzzers) could use to make the AUDIT_FAIL_PANIC case > in audit_panic() less panicky. However, as syzbot isn't currently > able to test the kernel's audit code due to it's pid namespace > restrictions, it doesn't make much sense to add this capability. If > syzbot removes that restriction, or when we get to the point that we > support multiple audit daemons, we can revisit this. Yes, we need some story for both panic and pid ns. We also use a separate net ns, but allow fuzzer to create some sockets in the init net ns to overcome similar limitations. This is done using a pseudo-syscall hack: https://github.com/google/syzkaller/blob/4a4e0509de520c7139ca2b5606712cbadc550db2/executor/common_linux.h#L1546-L1562 But the pid ns is different and looks a bit harder as we need it during send of netlink messages. As a strawman proposal: the comment there says "for now": /* Only support auditd and auditctl in initial pid namespace * for now. */ if (task_active_pid_ns(current) != &init_pid_ns) return -EPERM; What does that mean? Is it a kind of TODO? I mean if removing that limitation is useful for other reasons, then maybe we could kill 2 birds with 1 stone. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-03-02 8:47 ` Dmitry Vyukov @ 2020-03-02 13:43 ` Paul Moore 2020-03-02 14:25 ` Dmitry Vyukov 0 siblings, 1 reply; 21+ messages in thread From: Paul Moore @ 2020-03-02 13:43 UTC (permalink / raw) To: Dmitry Vyukov; +Cc: Tetsuo Handa, syzbot, LKML, syzkaller-bugs, syzkaller On Mon, Mar 2, 2020 at 3:47 AM Dmitry Vyukov <dvyukov@google.com> wrote: > On Fri, Feb 28, 2020 at 2:09 PM Paul Moore <paul@paul-moore.com> wrote: > > On Fri, Feb 28, 2020 at 5:03 AM Tetsuo Handa > > <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > On 2020/02/28 9:14, Paul Moore wrote: > > > > We could consider adding a fuzz-friendly build time config which would > > > > disable the panic failsafe, but it probably isn't worth it at the > > > > moment considering the syzbot's pid namespace limitations. > > > > > > I think adding a fuzz-friendly build time config does worth. For example, > > > we have locations where printk() emits "BUG:" or "WARNING:" and fuzzer > > > misunderstands that a crash occurred. PID namespace is irrelevant. > > > I proposed one at > > > https://lkml.kernel.org/r/20191216095955.9886-1-penguin-kernel@I-love.SAKURA.ne.jp . > > > I appreciate your response. > > > > To be clear, I was talking specifically about the intentional panic in > > audit_panic(). It is different from every other panic I've ever seen > > (perhaps there are others?) in that it doesn't indicate a serious > > error condition in the kernel, it indicates that audit records were > > dropped. It seems extreme to most people, but some use cases require > > that the system panic rather than lose audit records. > > > > My suggestion was that we could introduce a Kconfig build flag that > > syzbot (and other fuzzers) could use to make the AUDIT_FAIL_PANIC case > > in audit_panic() less panicky. However, as syzbot isn't currently > > able to test the kernel's audit code due to it's pid namespace > > restrictions, it doesn't make much sense to add this capability. If > > syzbot removes that restriction, or when we get to the point that we > > support multiple audit daemons, we can revisit this. > > Yes, we need some story for both panic and pid ns. > > We also use a separate net ns, but allow fuzzer to create some sockets > in the init net ns to overcome similar limitations. This is done using > a pseudo-syscall hack: > https://github.com/google/syzkaller/blob/4a4e0509de520c7139ca2b5606712cbadc550db2/executor/common_linux.h#L1546-L1562 > > But the pid ns is different and looks a bit harder as we need it > during send of netlink messages. > > As a strawman proposal: the comment there says "for now": > > /* Only support auditd and auditctl in initial pid namespace > * for now. */ > if (task_active_pid_ns(current) != &init_pid_ns) > return -EPERM; > > What does that mean? Is it a kind of TODO? I mean if removing that > limitation is useful for other reasons, then maybe we could kill 2 > birds with 1 stone. Long story made short - the audit subsystem doesn't handle namespaces or containers as well as it should. Work is ongoing to add the necessary support, but it isn't there yet and I don't want us to just start removing restrictions until we have the proper support in place (this what I alluded to with my "... when we get to the point that we support multiple audit daemons, we can revisit this"). -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-03-02 13:43 ` Paul Moore @ 2020-03-02 14:25 ` Dmitry Vyukov 0 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov @ 2020-03-02 14:25 UTC (permalink / raw) To: Paul Moore; +Cc: Tetsuo Handa, syzbot, LKML, syzkaller-bugs, syzkaller On Mon, Mar 2, 2020 at 2:43 PM Paul Moore <paul@paul-moore.com> wrote: > > On Mon, Mar 2, 2020 at 3:47 AM Dmitry Vyukov <dvyukov@google.com> wrote: > > On Fri, Feb 28, 2020 at 2:09 PM Paul Moore <paul@paul-moore.com> wrote: > > > On Fri, Feb 28, 2020 at 5:03 AM Tetsuo Handa > > > <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > > On 2020/02/28 9:14, Paul Moore wrote: > > > > > We could consider adding a fuzz-friendly build time config which would > > > > > disable the panic failsafe, but it probably isn't worth it at the > > > > > moment considering the syzbot's pid namespace limitations. > > > > > > > > I think adding a fuzz-friendly build time config does worth. For example, > > > > we have locations where printk() emits "BUG:" or "WARNING:" and fuzzer > > > > misunderstands that a crash occurred. PID namespace is irrelevant. > > > > I proposed one at > > > > https://lkml.kernel.org/r/20191216095955.9886-1-penguin-kernel@I-love.SAKURA.ne.jp . > > > > I appreciate your response. > > > > > > To be clear, I was talking specifically about the intentional panic in > > > audit_panic(). It is different from every other panic I've ever seen > > > (perhaps there are others?) in that it doesn't indicate a serious > > > error condition in the kernel, it indicates that audit records were > > > dropped. It seems extreme to most people, but some use cases require > > > that the system panic rather than lose audit records. > > > > > > My suggestion was that we could introduce a Kconfig build flag that > > > syzbot (and other fuzzers) could use to make the AUDIT_FAIL_PANIC case > > > in audit_panic() less panicky. However, as syzbot isn't currently > > > able to test the kernel's audit code due to it's pid namespace > > > restrictions, it doesn't make much sense to add this capability. If > > > syzbot removes that restriction, or when we get to the point that we > > > support multiple audit daemons, we can revisit this. > > > > Yes, we need some story for both panic and pid ns. > > > > We also use a separate net ns, but allow fuzzer to create some sockets > > in the init net ns to overcome similar limitations. This is done using > > a pseudo-syscall hack: > > https://github.com/google/syzkaller/blob/4a4e0509de520c7139ca2b5606712cbadc550db2/executor/common_linux.h#L1546-L1562 > > > > But the pid ns is different and looks a bit harder as we need it > > during send of netlink messages. > > > > As a strawman proposal: the comment there says "for now": > > > > /* Only support auditd and auditctl in initial pid namespace > > * for now. */ > > if (task_active_pid_ns(current) != &init_pid_ns) > > return -EPERM; > > > > What does that mean? Is it a kind of TODO? I mean if removing that > > limitation is useful for other reasons, then maybe we could kill 2 > > birds with 1 stone. > > Long story made short - the audit subsystem doesn't handle namespaces > or containers as well as it should. Work is ongoing to add the > necessary support, but it isn't there yet and I don't want us to just > start removing restrictions until we have the proper support in place > (this what I alluded to with my "... when we get to the point that we > support multiple audit daemons, we can revisit this"). I see. Thanks for context. FTR we've started collecting such cases (panic-but-working-as-intended-and-hard-to-selectively-filter-out) in https://github.com/google/syzkaller/issues/1622. So that they are not lost in future. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded 2020-02-28 0:14 ` Paul Moore @ 2020-03-02 8:42 ` Dmitry Vyukov -1 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov @ 2020-03-02 8:42 UTC (permalink / raw) To: Paul Moore Cc: Tetsuo Handa, Eric Paris, syzbot, a, b.a.t.m.a.n, Dan Carpenter, David Miller, fzago, Greg Kroah-Hartman, john.hammond, linux-audit, LKML, mareklindner, netdev, sw, syzkaller-bugs, syzkaller On Fri, Feb 28, 2020 at 1:14 AM Paul Moore <paul@paul-moore.com> wrote: > > On Thu, Feb 27, 2020 at 10:40 AM Dmitry Vyukov <dvyukov@google.com> wrote: > > On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > > > Which seems like this is working as designed if it is setting the > > > > failure mode to 2. > > > > > > So it is, good catch :) I saw the panic and instinctively chalked > > > that up to a mistaken config, not expecting that it was what was being > > > tested. > > > > Yes, this audit failure mode is quite unpleasant for fuzzing. And > > since this is not a top-level syscall argument value, it's effectively > > impossible to filter out in the fuzzer. Maybe another use case for the > > "fuzer lockdown" feature +Tetsuo proposed. > > With the current state of the things, I think we only have an option > > to disable fuzzing of audit. Which is pity because it has found 5 or > > so real bugs in audit too. > > But this happened anyway because audit is only reachable from init pid > > namespace and syzkaller always unshares pid namespace for sandboxing > > reasons, that was removed accidentally and that's how it managed to > > find the bugs. But the unshare is restored now: > > https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c > > > > As a side effect all other real bugs in audit will be auto-obsoleted > > in future if not fixed because they will stop happening. > > On the plus side, I did submit fixes for the other real audit bugs > that syzbot found recently and Linus pulled them into the tree today > so at least we have that small victory. +1! > We could consider adding a fuzz-friendly build time config which would > disable the panic failsafe, but it probably isn't worth it at the > moment considering the syzbot's pid namespace limitations. > > -- > paul moore > www.paul-moore.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: kernel panic: audit: backlog limit exceeded @ 2020-03-02 8:42 ` Dmitry Vyukov 0 siblings, 0 replies; 21+ messages in thread From: Dmitry Vyukov @ 2020-03-02 8:42 UTC (permalink / raw) To: Paul Moore Cc: mareklindner, sw, Greg Kroah-Hartman, a, LKML, David Miller, syzkaller-bugs, b.a.t.m.a.n, linux-audit, syzkaller, netdev, john.hammond, fzago, syzbot, Dan Carpenter On Fri, Feb 28, 2020 at 1:14 AM Paul Moore <paul@paul-moore.com> wrote: > > On Thu, Feb 27, 2020 at 10:40 AM Dmitry Vyukov <dvyukov@google.com> wrote: > > On Mon, Feb 24, 2020 at 11:47 PM Paul Moore <paul@paul-moore.com> wrote: > > > On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote: > > > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the > > > > reproducer listed) looks like it is literally fuzzing the AUDIT_SET. > > > > Which seems like this is working as designed if it is setting the > > > > failure mode to 2. > > > > > > So it is, good catch :) I saw the panic and instinctively chalked > > > that up to a mistaken config, not expecting that it was what was being > > > tested. > > > > Yes, this audit failure mode is quite unpleasant for fuzzing. And > > since this is not a top-level syscall argument value, it's effectively > > impossible to filter out in the fuzzer. Maybe another use case for the > > "fuzer lockdown" feature +Tetsuo proposed. > > With the current state of the things, I think we only have an option > > to disable fuzzing of audit. Which is pity because it has found 5 or > > so real bugs in audit too. > > But this happened anyway because audit is only reachable from init pid > > namespace and syzkaller always unshares pid namespace for sandboxing > > reasons, that was removed accidentally and that's how it managed to > > find the bugs. But the unshare is restored now: > > https://github.com/google/syzkaller/commit/5e0e1d1450d7c3497338082fc28912fdd7f93a3c > > > > As a side effect all other real bugs in audit will be auto-obsoleted > > in future if not fixed because they will stop happening. > > On the plus side, I did submit fixes for the other real audit bugs > that syzbot found recently and Linus pulled them into the tree today > so at least we have that small victory. +1! > We could consider adding a fuzz-friendly build time config which would > disable the panic failsafe, but it probably isn't worth it at the > moment considering the syzbot's pid namespace limitations. > > -- > paul moore > www.paul-moore.com -- Linux-audit mailing list Linux-audit@redhat.com https://www.redhat.com/mailman/listinfo/linux-audit ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2020-03-02 14:25 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-24 8:18 kernel panic: audit: backlog limit exceeded syzbot
2020-02-24 8:18 ` syzbot
2020-02-24 22:38 ` Paul Moore
2020-02-24 22:38 ` Paul Moore
2020-02-24 22:43 ` Eric Paris
2020-02-24 22:43 ` Eric Paris
2020-02-24 22:43 ` Eric Paris
2020-02-24 22:46 ` Paul Moore
2020-02-24 22:46 ` Paul Moore
[not found] ` <CAHC9VhQnbdJprbdTa_XcgUJaiwhzbnGMWJqHczU54UMk0AFCtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-27 15:39 ` (unknown) Dmitry Vyukov via B.A.T.M.A.N
2020-02-27 15:39 ` kernel panic: audit: backlog limit exceeded Dmitry Vyukov
2020-02-27 15:39 ` Dmitry Vyukov
2020-02-28 0:14 ` Paul Moore
2020-02-28 0:14 ` Paul Moore
2020-02-28 10:03 ` Tetsuo Handa
2020-02-28 13:08 ` Paul Moore
2020-03-02 8:47 ` Dmitry Vyukov
2020-03-02 13:43 ` Paul Moore
2020-03-02 14:25 ` Dmitry Vyukov
2020-03-02 8:42 ` Dmitry Vyukov
2020-03-02 8:42 ` Dmitry Vyukov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.