* [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 13:40 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mn and imx8mp have the same controller as the imx8mm which is slightly different than that of the imx7d. Using the fallback of the imx8mm enables the controllers to support HS400-ES which is not available on the imx7d. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 7dbbcae9485c..d6ea73d76bdd 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -39,14 +39,14 @@ properties: - items: - enum: - fsl,imx8mm-usdhc - - fsl,imx8mn-usdhc - - fsl,imx8mp-usdhc - fsl,imx8mq-usdhc - fsl,imx8qm-usdhc - fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc - items: - enum: + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc - fsl,imx93-usdhc - fsl,imx8ulp-usdhc - const: fsl,imx8mm-usdhc -- 2.34.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 13:40 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mn and imx8mp have the same controller as the imx8mm which is slightly different than that of the imx7d. Using the fallback of the imx8mm enables the controllers to support HS400-ES which is not available on the imx7d. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 7dbbcae9485c..d6ea73d76bdd 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -39,14 +39,14 @@ properties: - items: - enum: - fsl,imx8mm-usdhc - - fsl,imx8mn-usdhc - - fsl,imx8mp-usdhc - fsl,imx8mq-usdhc - fsl,imx8qm-usdhc - fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc - items: - enum: + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc - fsl,imx93-usdhc - fsl,imx8ulp-usdhc - const: fsl,imx8mm-usdhc -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/3] arm64: dts: imx8mn: Enable HS400-ES 2022-03-23 13:40 ` Adam Ford @ 2022-03-23 13:40 ` Adam Ford -1 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mn has the same controller as the imx8mm which supports HS400-ES. Change the compatible fallback to imx8mm to enable it. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 99f0f5026674..959285c3fee0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -933,7 +933,7 @@ mu: mailbox@30aa0000 { }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -947,7 +947,7 @@ usdhc1: mmc@30b40000 { }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -961,7 +961,7 @@ usdhc2: mmc@30b50000 { }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, -- 2.34.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/3] arm64: dts: imx8mn: Enable HS400-ES @ 2022-03-23 13:40 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mn has the same controller as the imx8mm which supports HS400-ES. Change the compatible fallback to imx8mm to enable it. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 99f0f5026674..959285c3fee0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -933,7 +933,7 @@ mu: mailbox@30aa0000 { }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -947,7 +947,7 @@ usdhc1: mmc@30b40000 { }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -961,7 +961,7 @@ usdhc2: mmc@30b50000 { }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/3] arm64: dts: imx8mp: Enable HS400-ES 2022-03-23 13:40 ` Adam Ford @ 2022-03-23 13:40 ` Adam Ford -1 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mp has the same controller as the imx8mm which supports HS400-ES. Change the compatible fallback to imx8mm to enable it. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 794d75173cf5..d5ee1520f1fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -769,7 +769,7 @@ i2c6: i2c@30ae0000 { }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -783,7 +783,7 @@ usdhc1: mmc@30b40000 { }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -797,7 +797,7 @@ usdhc2: mmc@30b50000 { }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, -- 2.34.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/3] arm64: dts: imx8mp: Enable HS400-ES @ 2022-03-23 13:40 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 13:40 UTC (permalink / raw) To: linux-arm-kernel Cc: aford, Adam Ford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel The SDHC controller in the imx8mp has the same controller as the imx8mm which supports HS400-ES. Change the compatible fallback to imx8mm to enable it. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 794d75173cf5..d5ee1520f1fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -769,7 +769,7 @@ i2c6: i2c@30ae0000 { }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -783,7 +783,7 @@ usdhc1: mmc@30b40000 { }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -797,7 +797,7 @@ usdhc2: mmc@30b50000 { }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback 2022-03-23 13:40 ` Adam Ford @ 2022-03-23 13:56 ` Krzysztof Kozlowski -1 siblings, 0 replies; 16+ messages in thread From: Krzysztof Kozlowski @ 2022-03-23 13:56 UTC (permalink / raw) To: Adam Ford, linux-arm-kernel Cc: aford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel On 23/03/2022 14:40, Adam Ford wrote: > The SDHC controller in the imx8mn and imx8mp have the same controller > as the imx8mm which is slightly different than that of the imx7d. > Using the fallback of the imx8mm enables the controllers to support > HS400-ES which is not available on the imx7d. > > Signed-off-by: Adam Ford <aford173@gmail.com> > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index 7dbbcae9485c..d6ea73d76bdd 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -39,14 +39,14 @@ properties: > - items: > - enum: > - fsl,imx8mm-usdhc Your change looks reasonable, but why imx8mm is compatible with imx7d? > - - fsl,imx8mn-usdhc > - - fsl,imx8mp-usdhc > - fsl,imx8mq-usdhc > - fsl,imx8qm-usdhc > - fsl,imx8qxp-usdhc > - const: fsl,imx7d-usdhc > - items: > - enum: > + - fsl,imx8mn-usdhc > + - fsl,imx8mp-usdhc > - fsl,imx93-usdhc > - fsl,imx8ulp-usdhc > - const: fsl,imx8mm-usdhc Best regards, Krzysztof ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 13:56 ` Krzysztof Kozlowski 0 siblings, 0 replies; 16+ messages in thread From: Krzysztof Kozlowski @ 2022-03-23 13:56 UTC (permalink / raw) To: Adam Ford, linux-arm-kernel Cc: aford, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, linux-kernel On 23/03/2022 14:40, Adam Ford wrote: > The SDHC controller in the imx8mn and imx8mp have the same controller > as the imx8mm which is slightly different than that of the imx7d. > Using the fallback of the imx8mm enables the controllers to support > HS400-ES which is not available on the imx7d. > > Signed-off-by: Adam Ford <aford173@gmail.com> > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index 7dbbcae9485c..d6ea73d76bdd 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -39,14 +39,14 @@ properties: > - items: > - enum: > - fsl,imx8mm-usdhc Your change looks reasonable, but why imx8mm is compatible with imx7d? > - - fsl,imx8mn-usdhc > - - fsl,imx8mp-usdhc > - fsl,imx8mq-usdhc > - fsl,imx8qm-usdhc > - fsl,imx8qxp-usdhc > - const: fsl,imx7d-usdhc > - items: > - enum: > + - fsl,imx8mn-usdhc > + - fsl,imx8mp-usdhc > - fsl,imx93-usdhc > - fsl,imx8ulp-usdhc > - const: fsl,imx8mm-usdhc Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback 2022-03-23 13:56 ` Krzysztof Kozlowski @ 2022-03-23 14:00 ` Adam Ford -1 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 14:00 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On 23/03/2022 14:40, Adam Ford wrote: > > The SDHC controller in the imx8mn and imx8mp have the same controller > > as the imx8mm which is slightly different than that of the imx7d. > > Using the fallback of the imx8mm enables the controllers to support > > HS400-ES which is not available on the imx7d. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > index 7dbbcae9485c..d6ea73d76bdd 100644 > > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > @@ -39,14 +39,14 @@ properties: > > - items: > > - enum: > > - fsl,imx8mm-usdhc > > Your change looks reasonable, but why imx8mm is compatible with imx7d? I saw that, and I wasn't sure the best way to go about fixing it. If I move the 8mm out of the imx7d category, do I need to add it to the enum list associated with the imx8mm, or can I just delete it from the enum leaving the const for imx8mm good enough? I am not very good with YAML files yet, so please forgive my ignorance. adam > > > - - fsl,imx8mn-usdhc > > - - fsl,imx8mp-usdhc > > - fsl,imx8mq-usdhc > > - fsl,imx8qm-usdhc > > - fsl,imx8qxp-usdhc > > - const: fsl,imx7d-usdhc > > - items: > > - enum: > > + - fsl,imx8mn-usdhc > > + - fsl,imx8mp-usdhc > > - fsl,imx93-usdhc > > - fsl,imx8ulp-usdhc > > - const: fsl,imx8mm-usdhc > > > Best regards, > Krzysztof ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 14:00 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 14:00 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On 23/03/2022 14:40, Adam Ford wrote: > > The SDHC controller in the imx8mn and imx8mp have the same controller > > as the imx8mm which is slightly different than that of the imx7d. > > Using the fallback of the imx8mm enables the controllers to support > > HS400-ES which is not available on the imx7d. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > index 7dbbcae9485c..d6ea73d76bdd 100644 > > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > @@ -39,14 +39,14 @@ properties: > > - items: > > - enum: > > - fsl,imx8mm-usdhc > > Your change looks reasonable, but why imx8mm is compatible with imx7d? I saw that, and I wasn't sure the best way to go about fixing it. If I move the 8mm out of the imx7d category, do I need to add it to the enum list associated with the imx8mm, or can I just delete it from the enum leaving the const for imx8mm good enough? I am not very good with YAML files yet, so please forgive my ignorance. adam > > > - - fsl,imx8mn-usdhc > > - - fsl,imx8mp-usdhc > > - fsl,imx8mq-usdhc > > - fsl,imx8qm-usdhc > > - fsl,imx8qxp-usdhc > > - const: fsl,imx7d-usdhc > > - items: > > - enum: > > + - fsl,imx8mn-usdhc > > + - fsl,imx8mp-usdhc > > - fsl,imx93-usdhc > > - fsl,imx8ulp-usdhc > > - const: fsl,imx8mm-usdhc > > > Best regards, > Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback 2022-03-23 14:00 ` Adam Ford @ 2022-03-23 14:11 ` Krzysztof Kozlowski -1 siblings, 0 replies; 16+ messages in thread From: Krzysztof Kozlowski @ 2022-03-23 14:11 UTC (permalink / raw) To: Adam Ford Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On 23/03/2022 15:00, Adam Ford wrote: > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: >> >> On 23/03/2022 14:40, Adam Ford wrote: >>> The SDHC controller in the imx8mn and imx8mp have the same controller >>> as the imx8mm which is slightly different than that of the imx7d. >>> Using the fallback of the imx8mm enables the controllers to support >>> HS400-ES which is not available on the imx7d. >>> >>> Signed-off-by: Adam Ford <aford173@gmail.com> >>> >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> index 7dbbcae9485c..d6ea73d76bdd 100644 >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> @@ -39,14 +39,14 @@ properties: >>> - items: >>> - enum: >>> - fsl,imx8mm-usdhc >> >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > I saw that, and I wasn't sure the best way to go about fixing it. If > I move the 8mm out of the imx7d category, do I need to add it to the > enum list associated with the imx8mm, or can I just delete it from the > enum leaving the const for imx8mm good enough? > The DTS is using: compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" which looks incorrect, based on what you wrote in commit description. Since fsl,imx8mm-usdhc has its own compatibility-group and defines the properties for entire family (imx8mm + imx8mn + imx8mp), then I would assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or everything is compatible with imx7d. IOW, DTS and bindings should be changed to one of following: 1. Everything compatible with imx7d: compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 2. A new group: compatible = "fsl,imx8mm-usdhc"; compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; Which one, I am not sure. My commit 80fd350b95 organized it in (1) approach, because also that time there was no new group for 8mm (added in commit 431fae8). I assume NXP engineer knows better, so the better solution would be (2). In such case, imx8mm has to be moved to the first enum and all DTS have to be adjusted. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 14:11 ` Krzysztof Kozlowski 0 siblings, 0 replies; 16+ messages in thread From: Krzysztof Kozlowski @ 2022-03-23 14:11 UTC (permalink / raw) To: Adam Ford Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On 23/03/2022 15:00, Adam Ford wrote: > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: >> >> On 23/03/2022 14:40, Adam Ford wrote: >>> The SDHC controller in the imx8mn and imx8mp have the same controller >>> as the imx8mm which is slightly different than that of the imx7d. >>> Using the fallback of the imx8mm enables the controllers to support >>> HS400-ES which is not available on the imx7d. >>> >>> Signed-off-by: Adam Ford <aford173@gmail.com> >>> >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> index 7dbbcae9485c..d6ea73d76bdd 100644 >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml >>> @@ -39,14 +39,14 @@ properties: >>> - items: >>> - enum: >>> - fsl,imx8mm-usdhc >> >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > I saw that, and I wasn't sure the best way to go about fixing it. If > I move the 8mm out of the imx7d category, do I need to add it to the > enum list associated with the imx8mm, or can I just delete it from the > enum leaving the const for imx8mm good enough? > The DTS is using: compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" which looks incorrect, based on what you wrote in commit description. Since fsl,imx8mm-usdhc has its own compatibility-group and defines the properties for entire family (imx8mm + imx8mn + imx8mp), then I would assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or everything is compatible with imx7d. IOW, DTS and bindings should be changed to one of following: 1. Everything compatible with imx7d: compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 2. A new group: compatible = "fsl,imx8mm-usdhc"; compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; Which one, I am not sure. My commit 80fd350b95 organized it in (1) approach, because also that time there was no new group for 8mm (added in commit 431fae8). I assume NXP engineer knows better, so the better solution would be (2). In such case, imx8mm has to be moved to the first enum and all DTS have to be adjusted. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback 2022-03-23 14:11 ` Krzysztof Kozlowski @ 2022-03-23 17:23 ` Adam Ford -1 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 17:23 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On 23/03/2022 15:00, Adam Ford wrote: > > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > >> > >> On 23/03/2022 14:40, Adam Ford wrote: > >>> The SDHC controller in the imx8mn and imx8mp have the same controller > >>> as the imx8mm which is slightly different than that of the imx7d. > >>> Using the fallback of the imx8mm enables the controllers to support > >>> HS400-ES which is not available on the imx7d. > >>> > >>> Signed-off-by: Adam Ford <aford173@gmail.com> > >>> > >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> index 7dbbcae9485c..d6ea73d76bdd 100644 > >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> @@ -39,14 +39,14 @@ properties: > >>> - items: > >>> - enum: > >>> - fsl,imx8mm-usdhc > >> > >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > > > I saw that, and I wasn't sure the best way to go about fixing it. If > > I move the 8mm out of the imx7d category, do I need to add it to the > > enum list associated with the imx8mm, or can I just delete it from the > > enum leaving the const for imx8mm good enough? > > > > The DTS is using: > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" > which looks incorrect, based on what you wrote in commit description. > Since fsl,imx8mm-usdhc has its own compatibility-group and defines the > properties for entire family (imx8mm + imx8mn + imx8mp), then I would > assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or > everything is compatible with imx7d. IOW, DTS and bindings should be > changed to one of following: > 1. Everything compatible with imx7d: > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > > 2. A new group: > compatible = "fsl,imx8mm-usdhc"; > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; > > Which one, I am not sure. My commit 80fd350b95 organized it in (1) > approach, because also that time there was no new group for 8mm (added > in commit 431fae8). I assume NXP engineer knows better, so the better > solution would be (2). In such case, imx8mm has to be moved to the first > enum and all DTS have to be adjusted. I pulled NXP's downtream kernel based on 5.15.y, and grepped the code for imx8mm-usdhc. It looks like the imx8mm, imx8mn, imx8mp, and imx8ulp use the imx8mm compatible flag. The imx8mq uses the older imx7d. I'll do a second revision later today or tomorrow. Looking inside the driver, it appears there are some other quirks that different between the imx7d and imx8mm beyond just support for HS400-ES, so I think your option 2 is appropriate. Hopefully someone from NXP can comment. adam > > > Best regards, > Krzysztof ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-23 17:23 ` Adam Ford 0 siblings, 0 replies; 16+ messages in thread From: Adam Ford @ 2022-03-23 17:23 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, linux-mmc, devicetree, Linux Kernel Mailing List On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On 23/03/2022 15:00, Adam Ford wrote: > > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote: > >> > >> On 23/03/2022 14:40, Adam Ford wrote: > >>> The SDHC controller in the imx8mn and imx8mp have the same controller > >>> as the imx8mm which is slightly different than that of the imx7d. > >>> Using the fallback of the imx8mm enables the controllers to support > >>> HS400-ES which is not available on the imx7d. > >>> > >>> Signed-off-by: Adam Ford <aford173@gmail.com> > >>> > >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> index 7dbbcae9485c..d6ea73d76bdd 100644 > >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > >>> @@ -39,14 +39,14 @@ properties: > >>> - items: > >>> - enum: > >>> - fsl,imx8mm-usdhc > >> > >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > > > I saw that, and I wasn't sure the best way to go about fixing it. If > > I move the 8mm out of the imx7d category, do I need to add it to the > > enum list associated with the imx8mm, or can I just delete it from the > > enum leaving the const for imx8mm good enough? > > > > The DTS is using: > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" > which looks incorrect, based on what you wrote in commit description. > Since fsl,imx8mm-usdhc has its own compatibility-group and defines the > properties for entire family (imx8mm + imx8mn + imx8mp), then I would > assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or > everything is compatible with imx7d. IOW, DTS and bindings should be > changed to one of following: > 1. Everything compatible with imx7d: > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > > 2. A new group: > compatible = "fsl,imx8mm-usdhc"; > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; > > Which one, I am not sure. My commit 80fd350b95 organized it in (1) > approach, because also that time there was no new group for 8mm (added > in commit 431fae8). I assume NXP engineer knows better, so the better > solution would be (2). In such case, imx8mm has to be moved to the first > enum and all DTS have to be adjusted. I pulled NXP's downtream kernel based on 5.15.y, and grepped the code for imx8mm-usdhc. It looks like the imx8mm, imx8mn, imx8mp, and imx8ulp use the imx8mm compatible flag. The imx8mq uses the older imx7d. I'll do a second revision later today or tomorrow. Looking inside the driver, it appears there are some other quirks that different between the imx7d and imx8mm beyond just support for HS400-ES, so I think your option 2 is appropriate. Hopefully someone from NXP can comment. adam > > > Best regards, > Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback 2022-03-23 17:23 ` Adam Ford @ 2022-03-24 2:54 ` Bough Chen -1 siblings, 0 replies; 16+ messages in thread From: Bough Chen @ 2022-03-24 2:54 UTC (permalink / raw) To: Adam Ford, Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, linux-mmc, devicetree, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 5074 bytes --] > -----Original Message----- > From: Adam Ford [mailto:aford173@gmail.com] > Sent: 2022年3月24日 1:23 > To: Krzysztof Kozlowski <krzk@kernel.org> > Cc: arm-soc <linux-arm-kernel@lists.infradead.org>; Adam Ford-BE > <aford@beaconembedded.com>; Ulf Hansson <ulf.hansson@linaro.org>; Rob > Herring <robh+dt@kernel.org>; Krzysztof Kozlowski <krzk+dt@kernel.org>; > Shawn Guo <shawnguo@kernel.org>; Sascha Hauer > <s.hauer@pengutronix.de>; Pengutronix Kernel Team > <kernel@pengutronix.de>; Fabio Estevam <festevam@gmail.com>; > dl-linux-imx <linux-imx@nxp.com>; linux-mmc <linux-mmc@vger.kernel.org>; > devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List > <linux-kernel@vger.kernel.org> > Subject: Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and > imx8mp compatible fallback > > On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org> > wrote: > > > > On 23/03/2022 15:00, Adam Ford wrote: > > > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> > wrote: > > >> > > >> On 23/03/2022 14:40, Adam Ford wrote: > > >>> The SDHC controller in the imx8mn and imx8mp have the same > > >>> controller as the imx8mm which is slightly different than that of the > imx7d. > > >>> Using the fallback of the imx8mm enables the controllers to > > >>> support HS400-ES which is not available on the imx7d. > > >>> > > >>> Signed-off-by: Adam Ford <aford173@gmail.com> > > >>> > > >>> diff --git > > >>> a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> index 7dbbcae9485c..d6ea73d76bdd 100644 > > >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> @@ -39,14 +39,14 @@ properties: > > >>> - items: > > >>> - enum: > > >>> - fsl,imx8mm-usdhc > > >> > > >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > > > > > I saw that, and I wasn't sure the best way to go about fixing it. > > > If I move the 8mm out of the imx7d category, do I need to add it to > > > the enum list associated with the imx8mm, or can I just delete it > > > from the enum leaving the const for imx8mm good enough? > > > > > > > The DTS is using: > > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" > > which looks incorrect, based on what you wrote in commit description. > > Since fsl,imx8mm-usdhc has its own compatibility-group and defines the > > properties for entire family (imx8mm + imx8mn + imx8mp), then I would > > assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or > > everything is compatible with imx7d. IOW, DTS and bindings should be > > changed to one of following: > > 1. Everything compatible with imx7d: > > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", > > "fsl,imx7d-usdhc"; > > > > 2. A new group: > > compatible = "fsl,imx8mm-usdhc"; > > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; > > > > Which one, I am not sure. My commit 80fd350b95 organized it in (1) > > approach, because also that time there was no new group for 8mm (added > > in commit 431fae8). I assume NXP engineer knows better, so the better > > solution would be (2). In such case, imx8mm has to be moved to the > > first enum and all DTS have to be adjusted. > > I pulled NXP's downtream kernel based on 5.15.y, and grepped the code for > imx8mm-usdhc. It looks like the imx8mm, imx8mn, imx8mp, and imx8ulp use > the imx8mm compatible flag. > The imx8mq uses the older imx7d. I'll do a second revision later today or > tomorrow. Looking inside the driver, it appears there are some other quirks > that different between the imx7d and imx8mm beyond just support for > HS400-ES, so I think your option 2 is appropriate. > Hopefully someone from NXP can comment. > I think better to change like this, and dts need change accordingly. compatible: oneOf: - enum: - fsl,imx25-esdhc - fsl,imx35-esdhc - fsl,imx51-esdhc - fsl,imx53-esdhc - fsl,imx6q-usdhc - fsl,imx6sl-usdhc - fsl,imx6sll-usdhc - fsl,imx6sx-usdhc - fsl,imx6ull-usdhc - fsl,imx7d-usdhc - fsl,imx7ulp-usdhc - fsl,imxrt1050-usdhc - fsl,imx8mm-usdhc - fsl,imx8qxp-usdhc - nxp,s32g2-usdhc - items: - enum: - fsl,imx8mq-usdhc - const: fsl,imx7d-usdhc - items: - enum: - fsl,imx93-usdhc - fsl,imx8ulp-usdhc - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - const: fsl,imx8mm-usdhc - items: - enum: - fsl,imx8qm-usdhc - const: fsl,imx8qxp-usdhc Best Regards Haibo Chen > adam > > > > > > Best regards, > > Krzysztof [-- Attachment #2: smime.p7s --] [-- Type: application/pkcs7-signature, Size: 9551 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback @ 2022-03-24 2:54 ` Bough Chen 0 siblings, 0 replies; 16+ messages in thread From: Bough Chen @ 2022-03-24 2:54 UTC (permalink / raw) To: Adam Ford, Krzysztof Kozlowski Cc: arm-soc, Adam Ford-BE, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, linux-mmc, devicetree, Linux Kernel Mailing List [-- Attachment #1.1: Type: text/plain, Size: 5074 bytes --] > -----Original Message----- > From: Adam Ford [mailto:aford173@gmail.com] > Sent: 2022年3月24日 1:23 > To: Krzysztof Kozlowski <krzk@kernel.org> > Cc: arm-soc <linux-arm-kernel@lists.infradead.org>; Adam Ford-BE > <aford@beaconembedded.com>; Ulf Hansson <ulf.hansson@linaro.org>; Rob > Herring <robh+dt@kernel.org>; Krzysztof Kozlowski <krzk+dt@kernel.org>; > Shawn Guo <shawnguo@kernel.org>; Sascha Hauer > <s.hauer@pengutronix.de>; Pengutronix Kernel Team > <kernel@pengutronix.de>; Fabio Estevam <festevam@gmail.com>; > dl-linux-imx <linux-imx@nxp.com>; linux-mmc <linux-mmc@vger.kernel.org>; > devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List > <linux-kernel@vger.kernel.org> > Subject: Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and > imx8mp compatible fallback > > On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org> > wrote: > > > > On 23/03/2022 15:00, Adam Ford wrote: > > > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> > wrote: > > >> > > >> On 23/03/2022 14:40, Adam Ford wrote: > > >>> The SDHC controller in the imx8mn and imx8mp have the same > > >>> controller as the imx8mm which is slightly different than that of the > imx7d. > > >>> Using the fallback of the imx8mm enables the controllers to > > >>> support HS400-ES which is not available on the imx7d. > > >>> > > >>> Signed-off-by: Adam Ford <aford173@gmail.com> > > >>> > > >>> diff --git > > >>> a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> index 7dbbcae9485c..d6ea73d76bdd 100644 > > >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > > >>> @@ -39,14 +39,14 @@ properties: > > >>> - items: > > >>> - enum: > > >>> - fsl,imx8mm-usdhc > > >> > > >> Your change looks reasonable, but why imx8mm is compatible with imx7d? > > > > > > I saw that, and I wasn't sure the best way to go about fixing it. > > > If I move the 8mm out of the imx7d category, do I need to add it to > > > the enum list associated with the imx8mm, or can I just delete it > > > from the enum leaving the const for imx8mm good enough? > > > > > > > The DTS is using: > > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc" > > which looks incorrect, based on what you wrote in commit description. > > Since fsl,imx8mm-usdhc has its own compatibility-group and defines the > > properties for entire family (imx8mm + imx8mn + imx8mp), then I would > > assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or > > everything is compatible with imx7d. IOW, DTS and bindings should be > > changed to one of following: > > 1. Everything compatible with imx7d: > > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; > > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", > > "fsl,imx7d-usdhc"; > > > > 2. A new group: > > compatible = "fsl,imx8mm-usdhc"; > > compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc"; > > > > Which one, I am not sure. My commit 80fd350b95 organized it in (1) > > approach, because also that time there was no new group for 8mm (added > > in commit 431fae8). I assume NXP engineer knows better, so the better > > solution would be (2). In such case, imx8mm has to be moved to the > > first enum and all DTS have to be adjusted. > > I pulled NXP's downtream kernel based on 5.15.y, and grepped the code for > imx8mm-usdhc. It looks like the imx8mm, imx8mn, imx8mp, and imx8ulp use > the imx8mm compatible flag. > The imx8mq uses the older imx7d. I'll do a second revision later today or > tomorrow. Looking inside the driver, it appears there are some other quirks > that different between the imx7d and imx8mm beyond just support for > HS400-ES, so I think your option 2 is appropriate. > Hopefully someone from NXP can comment. > I think better to change like this, and dts need change accordingly. compatible: oneOf: - enum: - fsl,imx25-esdhc - fsl,imx35-esdhc - fsl,imx51-esdhc - fsl,imx53-esdhc - fsl,imx6q-usdhc - fsl,imx6sl-usdhc - fsl,imx6sll-usdhc - fsl,imx6sx-usdhc - fsl,imx6ull-usdhc - fsl,imx7d-usdhc - fsl,imx7ulp-usdhc - fsl,imxrt1050-usdhc - fsl,imx8mm-usdhc - fsl,imx8qxp-usdhc - nxp,s32g2-usdhc - items: - enum: - fsl,imx8mq-usdhc - const: fsl,imx7d-usdhc - items: - enum: - fsl,imx93-usdhc - fsl,imx8ulp-usdhc - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - const: fsl,imx8mm-usdhc - items: - enum: - fsl,imx8qm-usdhc - const: fsl,imx8qxp-usdhc Best Regards Haibo Chen > adam > > > > > > Best regards, > > Krzysztof [-- Attachment #1.2: smime.p7s --] [-- Type: application/pkcs7-signature, Size: 9551 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2022-03-24 2:55 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-03-23 13:40 [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback Adam Ford 2022-03-23 13:40 ` Adam Ford 2022-03-23 13:40 ` [PATCH 2/3] arm64: dts: imx8mn: Enable HS400-ES Adam Ford 2022-03-23 13:40 ` Adam Ford 2022-03-23 13:40 ` [PATCH 3/3] arm64: dts: imx8mp: " Adam Ford 2022-03-23 13:40 ` Adam Ford 2022-03-23 13:56 ` [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback Krzysztof Kozlowski 2022-03-23 13:56 ` Krzysztof Kozlowski 2022-03-23 14:00 ` Adam Ford 2022-03-23 14:00 ` Adam Ford 2022-03-23 14:11 ` Krzysztof Kozlowski 2022-03-23 14:11 ` Krzysztof Kozlowski 2022-03-23 17:23 ` Adam Ford 2022-03-23 17:23 ` Adam Ford 2022-03-24 2:54 ` Bough Chen 2022-03-24 2:54 ` Bough Chen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.