From: Adam Ford <aford173@gmail.com> To: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org, Tony Lindgren <tony@atomide.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCHv2 15/15] clk: ti: convert to use proper register definition for all accesses Date: Wed, 17 Jan 2018 07:27:20 -0600 [thread overview] Message-ID: <CAHCN7x+oKEmXBpogy4VOB8UgmTd6+X5fBiP66yzUqXmvDWdqaw@mail.gmail.com> (raw) In-Reply-To: <1489236606-24023-16-git-send-email-t-kristo@ti.com> On Sat, Mar 11, 2017 at 6:50 AM, Tero Kristo <t-kristo@ti.com> wrote: > Currently, TI clock driver uses an encapsulated struct that is cast into > a void pointer to store all register addresses. This can be considered > as rather nasty hackery, and prevents from expanding the register > address field also. Instead, replace all the code to use proper struct > in place for this, which contains all the previously used data. > > This patch is rather large as it is touching multiple files, but this > can't be split up as we need to avoid any boot breakage. > I know it's late coming, but according to git bisect, this patch is causing some problems with Logic PD Torpedo 37xx Dev kit. It it is a DM3730 that has a WL1283 chipset attached to the SDIO interface on MMC3. The driver seems to load properly, but when loading wpa_supplicant to activate the WL1283, we get a giant crash. I checked kernel revisions starting at 4.14 and working back to when it worked, then used git bisect from there. I am hoping it might be a simple fix for something that just needs to get added or tweaked in the device tree. # wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf -B Successfully initialized wpa_supplicant rfkill: Cannot open RFKILL control device [ 14.674011] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa 0ad014 [ 14.682708] pgd = cc2ac000 [ 14.685607] [fa0ad014] *pgd=48011452(bad) [ 14.689941] Internal error: : 1028 [#1] SMP ARM [ 14.694732] Modules linked in: arc4 wl12xx wlcore mac80211 cfg80211 evdev joy dev snd_soc_omap_twl4030 omapfb cfbfillrect cfbimgblt leds_gpio cpufreq_dt cfbco pyarea led_class thermal_sys panel_dpi pwm_omap_dmtimer gpio_keys hwmon pwm_bl o map3_isp videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l 2_common snd_soc_omap_mcbsp snd_soc_omap omap_wdt videodev media omap_hdq wlcore _sdio wire cn phy_twl4030_usb omap2430 musb_hdrc udc_core twl4030_wdt rtc_twl sn d_soc_twl4030 ehci_omap snd_soc_core snd_pcm_dmaengine snd_pcm ehci_hcd snd_time r twl4030_pwrbutton ohci_omap3 twl4030_charger pwm_twl_led snd twl4030_keypad so undcore pwm_twl industrialio matrix_keymap ohci_hcd usbcore usb_common at24 tsc2 004 omap_ssi tsc200x_core nvmem_core hsi omapdss [ 14.766357] CPU: 0 PID: 174 Comm: wpa_supplicant Not tainted 4.11.0-rc1-00015 -g6c0afb5 #1 [ 14.774993] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 14.781646] task: cc8a8000 task.stack: cc8bc000 [ 14.786468] PC is at _wait_softreset_complete+0x70/0x114 [ 14.792083] LR is at _enable_sysc+0x30/0x238 [ 14.796630] pc : [<c011fe00>] lr : [<c0120ce0>] psr: 40010093 [ 14.796630] sp : cc8bdbd0 ip : c01288fc fp : 00000000 [ 14.808715] r10: cc8bc000 r9 : c0b0225c r8 : 00002710 [ 14.814239] r7 : 000346dc r6 : c0d20644 r5 : c0d202ac r4 : 00000000 [ 14.821136] r3 : fa0ad014 r2 : fa0ad000 r1 : 00000000 r0 : c0d202ac [ 14.828033] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment non e [ 14.835662] Control: 10c5387d Table: 8c2ac019 DAC: 00000051 [ 14.841735] Process wpa_supplicant (pid: 174, stack limit = 0xcc8bc218) [snip what appears to be just memory dump or a bunch of numbers] [ 15.147277] [<c011fe00>] (_wait_softreset_complete) from [<c0120ce0>] (_enabl e_sysc+0x30/0x238) [ 15.156463] [<c0120ce0>] (_enable_sysc) from [<c012101c>] (_enable+0x134/0x25 8) [ 15.164215] [<c012101c>] (_enable) from [<c012172c>] (omap_hwmod_enable+0x28/ 0x48) [ 15.172210] [<c012172c>] (omap_hwmod_enable) from [<c0122700>] (omap_device_e nable+0x3c/0x90) [ 15.181213] [<c0122700>] (omap_device_enable) from [<c0122764>] (_od_runtime_ resume+0x10/0x38) [ 15.190338] [<c0122764>] (_od_runtime_resume) from [<c057fd24>] (__rpm_callba ck+0xc0/0x214) [ 15.199157] [<c057fd24>] (__rpm_callback) from [<c057fec8>] (rpm_callback+0x5 0/0x80) [ 15.207366] [<c057fec8>] (rpm_callback) from [<c057f980>] (rpm_resume+0x4b8/0 x738) [ 15.215362] [<c057f980>] (rpm_resume) from [<c057fc4c>] (__pm_runtime_resume+ 0x4c/0x64) [ 15.223846] [<c057fc4c>] (__pm_runtime_resume) from [<c065f538>] (__mmc_claim _host+0x174/0x1b8) [ 15.233062] [<c065f538>] (__mmc_claim_host) from [<bf2ce1e8>] (wl12xx_sdio_ra w_write+0x34/0x130 [wlcore_sdio]) [ 15.243927] [<bf2ce1e8>] (wl12xx_sdio_raw_write [wlcore_sdio]) from [<bf604db 0>] (wlcore_set_partition+0xc4/0x4b0 [wlcore]) [ 15.256042] [<bf604db0>] (wlcore_set_partition [wlcore]) from [<bf5fb840>] (w l12xx_set_power_on+0x80/0x144 [wlcore]) [ 15.267517] [<bf5fb840>] (wl12xx_set_power_on [wlcore]) from [<bf5fed6c>] (wl 1271_op_add_interface+0x6ac/0x9c0 [wlcore]) [ 15.280303] [<bf5fed6c>] (wl1271_op_add_interface [wlcore]) from [<bf518cd0>] (drv_add_interface+0x80/0x31c [mac80211]) [ 15.293121] [<bf518cd0>] (drv_add_interface [mac80211]) from [<bf537690>] (ie ee80211_do_open+0x474/0x8d4 [mac80211]) [ 15.304931] [<bf537690>] (ieee80211_do_open [mac80211]) from [<c06b8124>] (__ dev_open+0xa8/0x110) [ 15.314300] [<c06b8124>] (__dev_open) from [<c06b83a8>] (__dev_change_flags+0 x88/0x14c) [ 15.322784] [<c06b83a8>] (__dev_change_flags) from [<c06b8484>] (dev_change_f lags+0x18/0x48) [ 15.331695] [<c06b8484>] (dev_change_flags) from [<c07334f4>] (devinet_ioctl+ 0x720/0x824) [ 15.340362] [<c07334f4>] (devinet_ioctl) from [<c0692d24>] (sock_ioctl+0x160/ 0x318) [ 15.348449] [<c0692d24>] (sock_ioctl) from [<c02c7d8c>] (do_vfs_ioctl+0x90/0x a10) [ 15.356384] [<c02c7d8c>] (do_vfs_ioctl) from [<c02c8778>] (SyS_ioctl+0x6c/0x7 c) [ 15.364105] [<c02c8778>] (SyS_ioctl) from [<c0107840>] (ret_fast_syscall+0x0/ 0x1c) [ 15.372131] Code: e3120c01 e595205c e6f23073 1affffef (e5933000) [ 15.378601] ---[ end trace 6966c05397661217 ]--- [ 15.383544] In-band Error seen by MPU at address 0 [snip] There is much more data to dump after this, but I don't want to dump a bunch of noise if it isn't helpful. > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Acked-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 3 +- > arch/arm/mach-omap2/clock.c | 2 +- > arch/arm/mach-omap2/clock.h | 2 ++ > arch/arm/mach-omap2/cm.h | 5 +-- > arch/arm/mach-omap2/cm2xxx.c | 9 ++--- > arch/arm/mach-omap2/cm3xxx.c | 10 ++---- > arch/arm/mach-omap2/cm_common.c | 2 +- > drivers/clk/ti/apll.c | 47 ++++++++++++------------- > drivers/clk/ti/autoidle.c | 18 +++++----- > drivers/clk/ti/clk-3xxx.c | 55 +++++++++++++++-------------- > drivers/clk/ti/clk.c | 47 ++++++++++++------------- > drivers/clk/ti/clkt_dflt.c | 61 ++++++++++++--------------------- > drivers/clk/ti/clkt_dpll.c | 6 ++-- > drivers/clk/ti/clkt_iclk.c | 29 ++++++++-------- > drivers/clk/ti/clock.h | 11 +++--- > drivers/clk/ti/clockdomain.c | 8 ----- > drivers/clk/ti/divider.c | 24 +++++++------ > drivers/clk/ti/dpll.c | 48 ++++++++++---------------- > drivers/clk/ti/dpll3xxx.c | 38 ++++++++++---------- > drivers/clk/ti/dpll44xx.c | 14 ++++---- > drivers/clk/ti/gate.c | 32 ++++++++--------- > drivers/clk/ti/interface.c | 22 ++++++------ > drivers/clk/ti/mux.c | 41 +++++++++------------- > include/linux/clk/ti.h | 46 +++++++++++++------------ > 24 files changed, 264 insertions(+), 316 deletions(-) > [ snip] > + s16 *prcm_inst, u8 *idlest_reg_id); > }; > > #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: aford173@gmail.com (Adam Ford) To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv2 15/15] clk: ti: convert to use proper register definition for all accesses Date: Wed, 17 Jan 2018 07:27:20 -0600 [thread overview] Message-ID: <CAHCN7x+oKEmXBpogy4VOB8UgmTd6+X5fBiP66yzUqXmvDWdqaw@mail.gmail.com> (raw) In-Reply-To: <1489236606-24023-16-git-send-email-t-kristo@ti.com> On Sat, Mar 11, 2017 at 6:50 AM, Tero Kristo <t-kristo@ti.com> wrote: > Currently, TI clock driver uses an encapsulated struct that is cast into > a void pointer to store all register addresses. This can be considered > as rather nasty hackery, and prevents from expanding the register > address field also. Instead, replace all the code to use proper struct > in place for this, which contains all the previously used data. > > This patch is rather large as it is touching multiple files, but this > can't be split up as we need to avoid any boot breakage. > I know it's late coming, but according to git bisect, this patch is causing some problems with Logic PD Torpedo 37xx Dev kit. It it is a DM3730 that has a WL1283 chipset attached to the SDIO interface on MMC3. The driver seems to load properly, but when loading wpa_supplicant to activate the WL1283, we get a giant crash. I checked kernel revisions starting at 4.14 and working back to when it worked, then used git bisect from there. I am hoping it might be a simple fix for something that just needs to get added or tweaked in the device tree. # wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf -B Successfully initialized wpa_supplicant rfkill: Cannot open RFKILL control device [ 14.674011] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa 0ad014 [ 14.682708] pgd = cc2ac000 [ 14.685607] [fa0ad014] *pgd=48011452(bad) [ 14.689941] Internal error: : 1028 [#1] SMP ARM [ 14.694732] Modules linked in: arc4 wl12xx wlcore mac80211 cfg80211 evdev joy dev snd_soc_omap_twl4030 omapfb cfbfillrect cfbimgblt leds_gpio cpufreq_dt cfbco pyarea led_class thermal_sys panel_dpi pwm_omap_dmtimer gpio_keys hwmon pwm_bl o map3_isp videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l 2_common snd_soc_omap_mcbsp snd_soc_omap omap_wdt videodev media omap_hdq wlcore _sdio wire cn phy_twl4030_usb omap2430 musb_hdrc udc_core twl4030_wdt rtc_twl sn d_soc_twl4030 ehci_omap snd_soc_core snd_pcm_dmaengine snd_pcm ehci_hcd snd_time r twl4030_pwrbutton ohci_omap3 twl4030_charger pwm_twl_led snd twl4030_keypad so undcore pwm_twl industrialio matrix_keymap ohci_hcd usbcore usb_common at24 tsc2 004 omap_ssi tsc200x_core nvmem_core hsi omapdss [ 14.766357] CPU: 0 PID: 174 Comm: wpa_supplicant Not tainted 4.11.0-rc1-00015 -g6c0afb5 #1 [ 14.774993] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 14.781646] task: cc8a8000 task.stack: cc8bc000 [ 14.786468] PC is at _wait_softreset_complete+0x70/0x114 [ 14.792083] LR is at _enable_sysc+0x30/0x238 [ 14.796630] pc : [<c011fe00>] lr : [<c0120ce0>] psr: 40010093 [ 14.796630] sp : cc8bdbd0 ip : c01288fc fp : 00000000 [ 14.808715] r10: cc8bc000 r9 : c0b0225c r8 : 00002710 [ 14.814239] r7 : 000346dc r6 : c0d20644 r5 : c0d202ac r4 : 00000000 [ 14.821136] r3 : fa0ad014 r2 : fa0ad000 r1 : 00000000 r0 : c0d202ac [ 14.828033] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment non e [ 14.835662] Control: 10c5387d Table: 8c2ac019 DAC: 00000051 [ 14.841735] Process wpa_supplicant (pid: 174, stack limit = 0xcc8bc218) [snip what appears to be just memory dump or a bunch of numbers] [ 15.147277] [<c011fe00>] (_wait_softreset_complete) from [<c0120ce0>] (_enabl e_sysc+0x30/0x238) [ 15.156463] [<c0120ce0>] (_enable_sysc) from [<c012101c>] (_enable+0x134/0x25 8) [ 15.164215] [<c012101c>] (_enable) from [<c012172c>] (omap_hwmod_enable+0x28/ 0x48) [ 15.172210] [<c012172c>] (omap_hwmod_enable) from [<c0122700>] (omap_device_e nable+0x3c/0x90) [ 15.181213] [<c0122700>] (omap_device_enable) from [<c0122764>] (_od_runtime_ resume+0x10/0x38) [ 15.190338] [<c0122764>] (_od_runtime_resume) from [<c057fd24>] (__rpm_callba ck+0xc0/0x214) [ 15.199157] [<c057fd24>] (__rpm_callback) from [<c057fec8>] (rpm_callback+0x5 0/0x80) [ 15.207366] [<c057fec8>] (rpm_callback) from [<c057f980>] (rpm_resume+0x4b8/0 x738) [ 15.215362] [<c057f980>] (rpm_resume) from [<c057fc4c>] (__pm_runtime_resume+ 0x4c/0x64) [ 15.223846] [<c057fc4c>] (__pm_runtime_resume) from [<c065f538>] (__mmc_claim _host+0x174/0x1b8) [ 15.233062] [<c065f538>] (__mmc_claim_host) from [<bf2ce1e8>] (wl12xx_sdio_ra w_write+0x34/0x130 [wlcore_sdio]) [ 15.243927] [<bf2ce1e8>] (wl12xx_sdio_raw_write [wlcore_sdio]) from [<bf604db 0>] (wlcore_set_partition+0xc4/0x4b0 [wlcore]) [ 15.256042] [<bf604db0>] (wlcore_set_partition [wlcore]) from [<bf5fb840>] (w l12xx_set_power_on+0x80/0x144 [wlcore]) [ 15.267517] [<bf5fb840>] (wl12xx_set_power_on [wlcore]) from [<bf5fed6c>] (wl 1271_op_add_interface+0x6ac/0x9c0 [wlcore]) [ 15.280303] [<bf5fed6c>] (wl1271_op_add_interface [wlcore]) from [<bf518cd0>] (drv_add_interface+0x80/0x31c [mac80211]) [ 15.293121] [<bf518cd0>] (drv_add_interface [mac80211]) from [<bf537690>] (ie ee80211_do_open+0x474/0x8d4 [mac80211]) [ 15.304931] [<bf537690>] (ieee80211_do_open [mac80211]) from [<c06b8124>] (__ dev_open+0xa8/0x110) [ 15.314300] [<c06b8124>] (__dev_open) from [<c06b83a8>] (__dev_change_flags+0 x88/0x14c) [ 15.322784] [<c06b83a8>] (__dev_change_flags) from [<c06b8484>] (dev_change_f lags+0x18/0x48) [ 15.331695] [<c06b8484>] (dev_change_flags) from [<c07334f4>] (devinet_ioctl+ 0x720/0x824) [ 15.340362] [<c07334f4>] (devinet_ioctl) from [<c0692d24>] (sock_ioctl+0x160/ 0x318) [ 15.348449] [<c0692d24>] (sock_ioctl) from [<c02c7d8c>] (do_vfs_ioctl+0x90/0x a10) [ 15.356384] [<c02c7d8c>] (do_vfs_ioctl) from [<c02c8778>] (SyS_ioctl+0x6c/0x7 c) [ 15.364105] [<c02c8778>] (SyS_ioctl) from [<c0107840>] (ret_fast_syscall+0x0/ 0x1c) [ 15.372131] Code: e3120c01 e595205c e6f23073 1affffef (e5933000) [ 15.378601] ---[ end trace 6966c05397661217 ]--- [ 15.383544] In-band Error seen by MPU at address 0 [snip] There is much more data to dump after this, but I don't want to dump a bunch of noise if it isn't helpful. > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Acked-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 3 +- > arch/arm/mach-omap2/clock.c | 2 +- > arch/arm/mach-omap2/clock.h | 2 ++ > arch/arm/mach-omap2/cm.h | 5 +-- > arch/arm/mach-omap2/cm2xxx.c | 9 ++--- > arch/arm/mach-omap2/cm3xxx.c | 10 ++---- > arch/arm/mach-omap2/cm_common.c | 2 +- > drivers/clk/ti/apll.c | 47 ++++++++++++------------- > drivers/clk/ti/autoidle.c | 18 +++++----- > drivers/clk/ti/clk-3xxx.c | 55 +++++++++++++++-------------- > drivers/clk/ti/clk.c | 47 ++++++++++++------------- > drivers/clk/ti/clkt_dflt.c | 61 ++++++++++++--------------------- > drivers/clk/ti/clkt_dpll.c | 6 ++-- > drivers/clk/ti/clkt_iclk.c | 29 ++++++++-------- > drivers/clk/ti/clock.h | 11 +++--- > drivers/clk/ti/clockdomain.c | 8 ----- > drivers/clk/ti/divider.c | 24 +++++++------ > drivers/clk/ti/dpll.c | 48 ++++++++++---------------- > drivers/clk/ti/dpll3xxx.c | 38 ++++++++++---------- > drivers/clk/ti/dpll44xx.c | 14 ++++---- > drivers/clk/ti/gate.c | 32 ++++++++--------- > drivers/clk/ti/interface.c | 22 ++++++------ > drivers/clk/ti/mux.c | 41 +++++++++------------- > include/linux/clk/ti.h | 46 +++++++++++++------------ > 24 files changed, 264 insertions(+), 316 deletions(-) > [ snip] > + s16 *prcm_inst, u8 *idlest_reg_id); > }; > > #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-17 13:27 UTC|newest] Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-11 12:49 [PATCHv2 00/15] clk: ti: cleanups for 4.12 merge window Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 01/15] clk: ti: remove un-used definitions from public clk_hw_omap struct Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 02/15] clk: ti: add support for automatic clock alias generation Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 03/15] clk: ti: add API for creating aliases automatically for simple clock types Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 04/15] clk: ti: use automatic clock alias generation framework Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 05/15] clk: ti: add clkdm_lookup to the exported functions Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 06/15] clk: ti: move omap2_init_clk_clkdm under TI clock driver Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 07/15] clk: ti: enforce const types on string arrays Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` [PATCHv2 08/15] clk: ti: omap4: cleanup unnecessary clock aliases Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:49 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 09/15] clk: ti: drop unnecessary MEMMAP_ADDRESSING flag Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 10/15] clk: ti: mux: convert TI mux clock to use its internal data representation Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 11/15] clk: ti: divider: convert TI divider clock to use its own " Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 12/15] clk: ti: divider: add driver internal API for parsing divider data Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 13/15] clk: ti: gate: export gate_clk_ops locally Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 14/15] clk: ti: dpll44xx: fix clksel register initialization Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` [PATCHv2 15/15] clk: ti: convert to use proper register definition for all accesses Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2017-03-11 12:50 ` Tero Kristo 2018-01-17 13:27 ` Adam Ford [this message] 2018-01-17 13:27 ` Adam Ford 2018-01-17 14:02 ` Tero Kristo 2018-01-17 14:02 ` Tero Kristo 2018-01-17 14:02 ` Tero Kristo 2018-01-17 15:15 ` Adam Ford 2018-01-17 15:15 ` Adam Ford 2018-01-17 15:15 ` Adam Ford 2018-01-17 15:33 ` Adam Ford 2018-01-17 15:33 ` Adam Ford 2018-01-17 21:19 ` Tony Lindgren 2018-01-17 21:19 ` Tony Lindgren 2018-01-17 21:44 ` Adam Ford 2018-01-17 21:44 ` Adam Ford 2018-01-18 7:34 ` Tero Kristo 2018-01-18 7:34 ` Tero Kristo 2018-01-18 7:34 ` Tero Kristo 2018-01-18 13:26 ` Adam Ford 2018-01-18 13:26 ` Adam Ford 2018-01-18 13:29 ` Tero Kristo 2018-01-18 13:29 ` Tero Kristo 2018-01-18 13:29 ` Tero Kristo 2018-01-18 14:12 ` Adam Ford 2018-01-18 14:12 ` Adam Ford 2018-01-19 9:42 ` Tero Kristo 2018-01-19 9:42 ` Tero Kristo 2018-01-19 9:42 ` Tero Kristo 2018-01-19 16:43 ` Adam Ford 2018-01-19 16:43 ` Adam Ford 2018-01-19 16:43 ` Adam Ford 2018-01-22 7:07 ` Tero Kristo 2018-01-22 7:07 ` Tero Kristo 2018-01-22 7:07 ` Tero Kristo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAHCN7x+oKEmXBpogy4VOB8UgmTd6+X5fBiP66yzUqXmvDWdqaw@mail.gmail.com \ --to=aford173@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=sboyd@codeaurora.org \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.