* [PATCH v2] arm64: dts: imx8mm: Add NOC node
@ 2021-11-03 13:53 ` Tommaso Merciai
0 siblings, 0 replies; 8+ messages in thread
From: Tommaso Merciai @ 2021-11-03 13:53 UTC (permalink / raw)
Cc: tomm.merciai, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, Joakim Zhang, Frieder Schrempf, Alice Guo, Peng Fan,
Adam Ford, devicetree, linux-arm-kernel, linux-kernel
Add support for dynamic frequency scaling of the main NOC configuration
on imx8mm.
References:
- i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
- f18e6d573b80 arm64: dts: imx8mq: Add NOC node
- 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
- https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
---
Changes since v1:
- Fix noc_opp_table frequencies taking NXP bsp as reference
- Add reference link to nxp imx8mm dtsi on commit body
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..1bcc5e361ca3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MM_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-150M {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+
+ opp-375M {
+ opp-hz = /bits/ 64 <375000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+ };
+
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2] arm64: dts: imx8mm: Add NOC node
@ 2021-11-03 13:53 ` Tommaso Merciai
0 siblings, 0 replies; 8+ messages in thread
From: Tommaso Merciai @ 2021-11-03 13:53 UTC (permalink / raw)
Cc: tomm.merciai, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, Joakim Zhang, Frieder Schrempf, Alice Guo, Peng Fan,
Adam Ford, devicetree, linux-arm-kernel, linux-kernel
Add support for dynamic frequency scaling of the main NOC configuration
on imx8mm.
References:
- i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
- f18e6d573b80 arm64: dts: imx8mq: Add NOC node
- 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
- https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
---
Changes since v1:
- Fix noc_opp_table frequencies taking NXP bsp as reference
- Add reference link to nxp imx8mm dtsi on commit body
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..1bcc5e361ca3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MM_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-150M {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+
+ opp-375M {
+ opp-hz = /bits/ 64 <375000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+ };
+
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
2021-11-03 13:53 ` Tommaso Merciai
@ 2021-11-03 18:55 ` Adam Ford
-1 siblings, 0 replies; 8+ messages in thread
From: Adam Ford @ 2021-11-03 18:55 UTC (permalink / raw)
To: Tommaso Merciai
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List
On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
>
> Add support for dynamic frequency scaling of the main NOC configuration
> on imx8mm.
>
> References:
> - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
>
You're missing the signed-off-by tag.
From what I can tell, the default NOC clock is 750MHz. With this
patch enabled, i can manually change the NOC clock to 150, 375 or 750,
but it's not clear to me what this impacts. In the 8MQ, there are a
couple peripherals that are linked to the NOC, but we don't have those
same peripherals enabled in the 8mm. The
dt-bindings/interconnect/imx8mq.h list more NOC references than are
used in the device tree, so it's unclear to me if and what we need to
reference anything in the 8MM based on
dt-bindings/interconnect/imx8mm.h
adam
> ---
> Changes since v1:
> - Fix noc_opp_table frequencies taking NXP bsp as reference
> - Add reference link to nxp imx8mm dtsi on commit body
>
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index c2f3f118f82e..1bcc5e361ca3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> };
> };
>
> + noc: interconnect@32700000 {
> + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MM_CLK_NOC>;
> + fsl,ddrc = <&ddrc>;
> + #interconnect-cells = <1>;
> + operating-points-v2 = <&noc_opp_table>;
> +
> + noc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-150M {
> + opp-hz = /bits/ 64 <150000000>;
> + };
> +
> + opp-375M {
> + opp-hz = /bits/ 64 <375000000>;
> + };
> +
> + opp-750M {
> + opp-hz = /bits/ 64 <750000000>;
> + };
> + };
> + };
> +
> aips2: bus@30400000 {
> compatible = "fsl,aips-bus", "simple-bus";
> reg = <0x30400000 0x400000>;
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
@ 2021-11-03 18:55 ` Adam Ford
0 siblings, 0 replies; 8+ messages in thread
From: Adam Ford @ 2021-11-03 18:55 UTC (permalink / raw)
To: Tommaso Merciai
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List
On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
>
> Add support for dynamic frequency scaling of the main NOC configuration
> on imx8mm.
>
> References:
> - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
>
You're missing the signed-off-by tag.
From what I can tell, the default NOC clock is 750MHz. With this
patch enabled, i can manually change the NOC clock to 150, 375 or 750,
but it's not clear to me what this impacts. In the 8MQ, there are a
couple peripherals that are linked to the NOC, but we don't have those
same peripherals enabled in the 8mm. The
dt-bindings/interconnect/imx8mq.h list more NOC references than are
used in the device tree, so it's unclear to me if and what we need to
reference anything in the 8MM based on
dt-bindings/interconnect/imx8mm.h
adam
> ---
> Changes since v1:
> - Fix noc_opp_table frequencies taking NXP bsp as reference
> - Add reference link to nxp imx8mm dtsi on commit body
>
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index c2f3f118f82e..1bcc5e361ca3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> };
> };
>
> + noc: interconnect@32700000 {
> + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MM_CLK_NOC>;
> + fsl,ddrc = <&ddrc>;
> + #interconnect-cells = <1>;
> + operating-points-v2 = <&noc_opp_table>;
> +
> + noc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-150M {
> + opp-hz = /bits/ 64 <150000000>;
> + };
> +
> + opp-375M {
> + opp-hz = /bits/ 64 <375000000>;
> + };
> +
> + opp-750M {
> + opp-hz = /bits/ 64 <750000000>;
> + };
> + };
> + };
> +
> aips2: bus@30400000 {
> compatible = "fsl,aips-bus", "simple-bus";
> reg = <0x30400000 0x400000>;
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
2021-11-03 18:55 ` Adam Ford
@ 2021-11-03 23:08 ` Tommaso Merciai
-1 siblings, 0 replies; 8+ messages in thread
From: Tommaso Merciai @ 2021-11-03 23:08 UTC (permalink / raw)
To: Adam Ford
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List
On Wed, Nov 03, 2021 at 01:55:54PM -0500, Adam Ford wrote:
> On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
> >
> > Add support for dynamic frequency scaling of the main NOC configuration
> > on imx8mm.
> >
> > References:
> > - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> > - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> > - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> > - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> > arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
> >
>
> You're missing the signed-off-by tag.
Yes, sorry.
>
> From what I can tell, the default NOC clock is 750MHz. With this
> patch enabled, i can manually change the NOC clock to 150, 375 or 750,
> but it's not clear to me what this impacts. In the 8MQ, there are a
> couple peripherals that are linked to the NOC, but we don't have those
> same peripherals enabled in the 8mm. The
> dt-bindings/interconnect/imx8mq.h list more NOC references than are
> used in the device tree, so it's unclear to me if and what we need to
> reference anything in the 8MM based on
> dt-bindings/interconnect/imx8mm.h
>
> adam
Hi Adam,
Yes you are right, you mean that NOC is using default frequencies than
this this node at the moment is only a duplicate. But on the other
side, maybe in the future someone will need to modify default table and
use it. What do you think about? Let me know.
Thanks,
Tommaso
>
> > ---
> > Changes since v1:
> > - Fix noc_opp_table frequencies taking NXP bsp as reference
> > - Add reference link to nxp imx8mm dtsi on commit body
> >
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index c2f3f118f82e..1bcc5e361ca3 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> > };
> > };
> >
> > + noc: interconnect@32700000 {
> > + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> > + reg = <0x32700000 0x100000>;
> > + clocks = <&clk IMX8MM_CLK_NOC>;
> > + fsl,ddrc = <&ddrc>;
> > + #interconnect-cells = <1>;
> > + operating-points-v2 = <&noc_opp_table>;
> > +
> > + noc_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-150M {
> > + opp-hz = /bits/ 64 <150000000>;
> > + };
> > +
> > + opp-375M {
> > + opp-hz = /bits/ 64 <375000000>;
> > + };
> > +
> > + opp-750M {
> > + opp-hz = /bits/ 64 <750000000>;
> > + };
> > + };
> > + };
> > +
> > aips2: bus@30400000 {
> > compatible = "fsl,aips-bus", "simple-bus";
> > reg = <0x30400000 0x400000>;
> > --
> > 2.25.1
> >
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
@ 2021-11-03 23:08 ` Tommaso Merciai
0 siblings, 0 replies; 8+ messages in thread
From: Tommaso Merciai @ 2021-11-03 23:08 UTC (permalink / raw)
To: Adam Ford
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List
On Wed, Nov 03, 2021 at 01:55:54PM -0500, Adam Ford wrote:
> On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
> >
> > Add support for dynamic frequency scaling of the main NOC configuration
> > on imx8mm.
> >
> > References:
> > - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> > - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> > - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> > - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> > arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
> >
>
> You're missing the signed-off-by tag.
Yes, sorry.
>
> From what I can tell, the default NOC clock is 750MHz. With this
> patch enabled, i can manually change the NOC clock to 150, 375 or 750,
> but it's not clear to me what this impacts. In the 8MQ, there are a
> couple peripherals that are linked to the NOC, but we don't have those
> same peripherals enabled in the 8mm. The
> dt-bindings/interconnect/imx8mq.h list more NOC references than are
> used in the device tree, so it's unclear to me if and what we need to
> reference anything in the 8MM based on
> dt-bindings/interconnect/imx8mm.h
>
> adam
Hi Adam,
Yes you are right, you mean that NOC is using default frequencies than
this this node at the moment is only a duplicate. But on the other
side, maybe in the future someone will need to modify default table and
use it. What do you think about? Let me know.
Thanks,
Tommaso
>
> > ---
> > Changes since v1:
> > - Fix noc_opp_table frequencies taking NXP bsp as reference
> > - Add reference link to nxp imx8mm dtsi on commit body
> >
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index c2f3f118f82e..1bcc5e361ca3 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> > };
> > };
> >
> > + noc: interconnect@32700000 {
> > + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> > + reg = <0x32700000 0x100000>;
> > + clocks = <&clk IMX8MM_CLK_NOC>;
> > + fsl,ddrc = <&ddrc>;
> > + #interconnect-cells = <1>;
> > + operating-points-v2 = <&noc_opp_table>;
> > +
> > + noc_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-150M {
> > + opp-hz = /bits/ 64 <150000000>;
> > + };
> > +
> > + opp-375M {
> > + opp-hz = /bits/ 64 <375000000>;
> > + };
> > +
> > + opp-750M {
> > + opp-hz = /bits/ 64 <750000000>;
> > + };
> > + };
> > + };
> > +
> > aips2: bus@30400000 {
> > compatible = "fsl,aips-bus", "simple-bus";
> > reg = <0x30400000 0x400000>;
> > --
> > 2.25.1
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
2021-11-03 23:08 ` Tommaso Merciai
@ 2021-11-03 23:21 ` Adam Ford
-1 siblings, 0 replies; 8+ messages in thread
From: Adam Ford @ 2021-11-03 23:21 UTC (permalink / raw)
To: Tommaso Merciai
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List, Abel Vesa
On Wed, Nov 3, 2021 at 6:08 PM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
>
> On Wed, Nov 03, 2021 at 01:55:54PM -0500, Adam Ford wrote:
> > On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
> > >
> > > Add support for dynamic frequency scaling of the main NOC configuration
> > > on imx8mm.
> > >
> > > References:
> > > - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> > > - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> > > - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> > > - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> > > arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
> > >
> >
> > You're missing the signed-off-by tag.
>
> Yes, sorry.
> >
> > From what I can tell, the default NOC clock is 750MHz. With this
> > patch enabled, i can manually change the NOC clock to 150, 375 or 750,
> > but it's not clear to me what this impacts. In the 8MQ, there are a
> > couple peripherals that are linked to the NOC, but we don't have those
> > same peripherals enabled in the 8mm. The
> > dt-bindings/interconnect/imx8mq.h list more NOC references than are
> > used in the device tree, so it's unclear to me if and what we need to
> > reference anything in the 8MM based on
> > dt-bindings/interconnect/imx8mm.h
> >
> > adam
>
+ Abel
> Hi Adam,
> Yes you are right, you mean that NOC is using default frequencies than
> this this node at the moment is only a duplicate. But on the other
> side, maybe in the future someone will need to modify default table and
> use it. What do you think about? Let me know.
There is some discussion with Abel at [1]. I would defer to him to
see what he wants to do. At a minimum, I would resubmit the patch
with the s-o-b tag enabled, but I'd wait to see if there is any
objection.
[1] - https://lkml.org/lkml/2021/10/25/259
adam
>
> Thanks,
> Tommaso
> >
> > > ---
> > > Changes since v1:
> > > - Fix noc_opp_table frequencies taking NXP bsp as reference
> > > - Add reference link to nxp imx8mm dtsi on commit body
> > >
> > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> > > 1 file changed, 25 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > index c2f3f118f82e..1bcc5e361ca3 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> > > };
> > > };
> > >
> > > + noc: interconnect@32700000 {
> > > + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> > > + reg = <0x32700000 0x100000>;
> > > + clocks = <&clk IMX8MM_CLK_NOC>;
> > > + fsl,ddrc = <&ddrc>;
> > > + #interconnect-cells = <1>;
> > > + operating-points-v2 = <&noc_opp_table>;
> > > +
> > > + noc_opp_table: opp-table {
> > > + compatible = "operating-points-v2";
> > > +
> > > + opp-150M {
> > > + opp-hz = /bits/ 64 <150000000>;
> > > + };
> > > +
> > > + opp-375M {
> > > + opp-hz = /bits/ 64 <375000000>;
> > > + };
> > > +
> > > + opp-750M {
> > > + opp-hz = /bits/ 64 <750000000>;
> > > + };
> > > + };
> > > + };
> > > +
> > > aips2: bus@30400000 {
> > > compatible = "fsl,aips-bus", "simple-bus";
> > > reg = <0x30400000 0x400000>;
> > > --
> > > 2.25.1
> > >
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm: Add NOC node
@ 2021-11-03 23:21 ` Adam Ford
0 siblings, 0 replies; 8+ messages in thread
From: Adam Ford @ 2021-11-03 23:21 UTC (permalink / raw)
To: Tommaso Merciai
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Lucas Stach, Joakim Zhang,
Frieder Schrempf, Alice Guo, Peng Fan, devicetree, arm-soc,
Linux Kernel Mailing List, Abel Vesa
On Wed, Nov 3, 2021 at 6:08 PM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
>
> On Wed, Nov 03, 2021 at 01:55:54PM -0500, Adam Ford wrote:
> > On Wed, Nov 3, 2021 at 8:53 AM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
> > >
> > > Add support for dynamic frequency scaling of the main NOC configuration
> > > on imx8mm.
> > >
> > > References:
> > > - i.MX 8M Mini Applications Processor RM, Rev. 3, 11/2020
> > > - f18e6d573b80 arm64: dts: imx8mq: Add NOC node
> > > - 912b9dacf3f0 arm64: dts: imx8mq: increase NOC clock to 800 MHz
> > > - https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ \
> > > arm64/boot/dts/freescale/imx8mm.dtsi?h=lf-5.10.y
> > >
> >
> > You're missing the signed-off-by tag.
>
> Yes, sorry.
> >
> > From what I can tell, the default NOC clock is 750MHz. With this
> > patch enabled, i can manually change the NOC clock to 150, 375 or 750,
> > but it's not clear to me what this impacts. In the 8MQ, there are a
> > couple peripherals that are linked to the NOC, but we don't have those
> > same peripherals enabled in the 8mm. The
> > dt-bindings/interconnect/imx8mq.h list more NOC references than are
> > used in the device tree, so it's unclear to me if and what we need to
> > reference anything in the 8MM based on
> > dt-bindings/interconnect/imx8mm.h
> >
> > adam
>
+ Abel
> Hi Adam,
> Yes you are right, you mean that NOC is using default frequencies than
> this this node at the moment is only a duplicate. But on the other
> side, maybe in the future someone will need to modify default table and
> use it. What do you think about? Let me know.
There is some discussion with Abel at [1]. I would defer to him to
see what he wants to do. At a minimum, I would resubmit the patch
with the s-o-b tag enabled, but I'd wait to see if there is any
objection.
[1] - https://lkml.org/lkml/2021/10/25/259
adam
>
> Thanks,
> Tommaso
> >
> > > ---
> > > Changes since v1:
> > > - Fix noc_opp_table frequencies taking NXP bsp as reference
> > > - Add reference link to nxp imx8mm dtsi on commit body
> > >
> > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 25 +++++++++++++++++++++++
> > > 1 file changed, 25 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > index c2f3f118f82e..1bcc5e361ca3 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > @@ -719,6 +719,31 @@ pgc_mipi: power-domain@11 {
> > > };
> > > };
> > >
> > > + noc: interconnect@32700000 {
> > > + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> > > + reg = <0x32700000 0x100000>;
> > > + clocks = <&clk IMX8MM_CLK_NOC>;
> > > + fsl,ddrc = <&ddrc>;
> > > + #interconnect-cells = <1>;
> > > + operating-points-v2 = <&noc_opp_table>;
> > > +
> > > + noc_opp_table: opp-table {
> > > + compatible = "operating-points-v2";
> > > +
> > > + opp-150M {
> > > + opp-hz = /bits/ 64 <150000000>;
> > > + };
> > > +
> > > + opp-375M {
> > > + opp-hz = /bits/ 64 <375000000>;
> > > + };
> > > +
> > > + opp-750M {
> > > + opp-hz = /bits/ 64 <750000000>;
> > > + };
> > > + };
> > > + };
> > > +
> > > aips2: bus@30400000 {
> > > compatible = "fsl,aips-bus", "simple-bus";
> > > reg = <0x30400000 0x400000>;
> > > --
> > > 2.25.1
> > >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-11-03 23:36 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-03 13:53 [PATCH v2] arm64: dts: imx8mm: Add NOC node Tommaso Merciai
2021-11-03 13:53 ` Tommaso Merciai
2021-11-03 18:55 ` Adam Ford
2021-11-03 18:55 ` Adam Ford
2021-11-03 23:08 ` Tommaso Merciai
2021-11-03 23:08 ` Tommaso Merciai
2021-11-03 23:21 ` Adam Ford
2021-11-03 23:21 ` Adam Ford
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.