Anyone done a VAR-SOM-SOLO run-up?

Anyone done a VAR-SOM-SOLO run-up?

[Robin Gilks]

[-- Attachment #1: Type: text/plain, Size: 610 bytes --]

Greetings all

I'm having problems with the run-up of a Dizzy build on a VAR-SOM-SOLO. The
same image is OK with a quad core variant, its just the single core fails
so probably a DTB problem.

I can't find any info on getting into u-boot - not even which serial port
is used - so I can start debugging this.

Has anyone on the list experience of this SOM and its associated
VAR-MX6CustomBoard development/breakout board?

Thanks

-- 
*Robin Gilks*
Development

Delta Strike
Success through Delta Strike
phone:    +64 3 982 9892
skype:     robindeltastrike
web:       www.deltastrike.com

[-- Attachment #2: Type: text/html, Size: 2417 bytes --]

Re: Anyone done a VAR-SOM-SOLO run-up?

[Robin Gilks]

[-- Attachment #1: Type: text/plain, Size: 1131 bytes --]

OK thanks.

I've found the serial port now (not the 9 pin D type as expected but a
header) for the console and confirmed that a DTB file is totally missing
from the build!

Avagudweegend


On 17 July 2015 at 02:27, Leonardo Sandoval <
leonardo.sandoval.gonzalez@linux.intel.com> wrote:

> Robin,
> you may have better luck if you send your question to the meta-freescale
> mailing list.
>
> Leo
>
> On 07/15/2015 08:38 PM, Robin Gilks wrote:
>
>> Greetings all
>>
>> I'm having problems with the run-up of a Dizzy build on a VAR-SOM-SOLO.
>> The
>> same image is OK with a quad core variant, its just the single core fails
>> so probably a DTB problem.
>>
>> I can't find any info on getting into u-boot - not even which serial port
>> is used - so I can start debugging this.
>>
>> Has anyone on the list experience of this SOM and its associated
>> VAR-MX6CustomBoard development/breakout board?
>>
>> Thanks
>>
>>
>>
>>


-- 
*Robin Gilks*
Development

Delta Strike
Success through Delta Strike
phone:    +64 3 982 9892
skype:     robindeltastrike
web:       www.deltastrike.com

[-- Attachment #2: Type: text/html, Size: 3345 bytes --]