From: Amit Kucheria <amit.kucheria@verdurent.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Markus Mayer <mmayer@broadcom.com>,
"maintainer:BROADCOM STB AVS TMON DRIVER"
<bcm-kernel-feedback-list@broadcom.com>,
Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"open list:BROADCOM STB AVS TMON DRIVER"
<linux-pm@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters
Date: Wed, 4 Dec 2019 14:13:06 +0530 [thread overview]
Message-ID: <CAHLCerMCLDo90Lq2Pwb6OgPxzk=r1aR86BFEXm7hm=viaCPUXA@mail.gmail.com> (raw)
In-Reply-To: <20191030182132.25763-5-f.fainelli@gmail.com>
On Wed, Oct 30, 2019 at 11:52 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> Match the 7216 compatible string in order to derive the correct 16nm
> process thermal parameters to obtain correct readings.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> drivers/thermal/broadcom/brcmstb_thermal.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 2ad4eeb79f9c..41d4a142707c 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -283,12 +283,18 @@ static const struct thermal_zone_of_device_ops of_ops = {
> .set_trips = brcmstb_set_trips,
> };
>
> +static const struct brcmstb_thermal_params brcmstb_16nm_params = {
> + .offset = 457829,
> + .mult = 557,
> +};
> +
> static const struct brcmstb_thermal_params brcmstb_28nm_params = {
> .offset = 410040,
> .mult = 487,
> };
>
> static const struct of_device_id brcmstb_thermal_id_table[] = {
> + { .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params },
> { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
> {},
> };
> --
> 2.17.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Amit Kucheria <amit.kucheria@verdurent.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:BROADCOM STB AVS TMON DRIVER"
<linux-pm@vger.kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
LKML <linux-kernel@vger.kernel.org>,
Eduardo Valentin <edubezval@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
"maintainer:BROADCOM STB AVS TMON DRIVER"
<bcm-kernel-feedback-list@broadcom.com>,
Markus Mayer <mmayer@broadcom.com>,
Zhang Rui <rui.zhang@intel.com>,
"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters
Date: Wed, 4 Dec 2019 14:13:06 +0530 [thread overview]
Message-ID: <CAHLCerMCLDo90Lq2Pwb6OgPxzk=r1aR86BFEXm7hm=viaCPUXA@mail.gmail.com> (raw)
In-Reply-To: <20191030182132.25763-5-f.fainelli@gmail.com>
On Wed, Oct 30, 2019 at 11:52 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> Match the 7216 compatible string in order to derive the correct 16nm
> process thermal parameters to obtain correct readings.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> drivers/thermal/broadcom/brcmstb_thermal.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 2ad4eeb79f9c..41d4a142707c 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -283,12 +283,18 @@ static const struct thermal_zone_of_device_ops of_ops = {
> .set_trips = brcmstb_set_trips,
> };
>
> +static const struct brcmstb_thermal_params brcmstb_16nm_params = {
> + .offset = 457829,
> + .mult = 557,
> +};
> +
> static const struct brcmstb_thermal_params brcmstb_28nm_params = {
> .offset = 410040,
> .mult = 487,
> };
>
> static const struct of_device_id brcmstb_thermal_id_table[] = {
> + { .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params },
> { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
> {},
> };
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-04 8:43 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-30 18:21 [PATCH 0/6] brcmstb_thermal updates for new processes Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-10-30 18:21 ` [PATCH 1/6] thermal: brcmstb_thermal: Do not use DT coefficients Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-12-04 8:41 ` Amit Kucheria
2019-12-04 8:41 ` Amit Kucheria
2019-12-04 17:41 ` Florian Fainelli
2019-12-04 17:41 ` Florian Fainelli
2019-12-04 19:01 ` Amit Kucheria
2019-12-04 19:01 ` Amit Kucheria
2019-10-30 18:21 ` [PATCH 2/6] thermal: brcmstb_thermal: Prepare to support a different process Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-10-30 18:21 ` [PATCH 3/6] dt-bindings: thermal: Define BCM7216 thermal sensor compatible Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-11-06 3:55 ` Rob Herring
2019-11-06 3:55 ` Rob Herring
2019-10-30 18:21 ` [PATCH 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-12-04 8:43 ` Amit Kucheria [this message]
2019-12-04 8:43 ` Amit Kucheria
2019-10-30 18:21 ` [PATCH 5/6] thermal: brcmstb_thermal: Restructure interrupt registration Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-12-04 9:38 ` Amit Kucheria
2019-12-04 9:38 ` Amit Kucheria
2019-10-30 18:21 ` [PATCH 6/6] thermal: brcmstb_thermal: Register different ops per process Florian Fainelli
2019-10-30 18:21 ` Florian Fainelli
2019-12-04 9:38 ` Amit Kucheria
2019-12-04 9:38 ` Amit Kucheria
2019-11-20 18:43 ` [PATCH 0/6] brcmstb_thermal updates for new processes Florian Fainelli
2019-11-20 18:43 ` Florian Fainelli
2019-12-04 4:50 ` Florian Fainelli
2019-12-04 4:50 ` Florian Fainelli
2019-12-09 9:04 ` Daniel Lezcano
2019-12-09 9:04 ` Daniel Lezcano
2019-12-09 17:36 ` Florian Fainelli
2019-12-09 17:36 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHLCerMCLDo90Lq2Pwb6OgPxzk=r1aR86BFEXm7hm=viaCPUXA@mail.gmail.com' \
--to=amit.kucheria@verdurent.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mmayer@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.