From: Koen Beel <koen.beel.barco@gmail.com> To: "Lothar Waßmann" <LW@karo-electronics.de> Cc: arnd@arndb.de, dedekind1@gmail.com, Wolfram Sang <w.sang@pengutronix.de>, Huang Shijie <b32955@freescale.com>, linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, shijie8@gmail.com, Shawn Guo <shawn.guo@freescale.com> Subject: Re: [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Date: Fri, 29 Jul 2011 17:00:48 +0200 [thread overview] Message-ID: <CAHMSPgPXnDVO630P9fnogQ0XvPSrwz0MYzXfXZLJoJNRf1gifA@mail.gmail.com> (raw) In-Reply-To: <20018.43621.688990.319528@ipc1.ka-ro> On Fri, Jul 29, 2011 at 2:41 PM, Lothar Waßmann <LW@karo-electronics.de> wrote: > Hi, > > Koen Beel writes: >> Hi, >> >> On Fri, Jul 29, 2011 at 9:20 AM, Lothar Waßmann <LW@karo-electronics.de> wrote: >> > Hi, >> > >> > Koen Beel writes: >> >> Hi, >> >> >> >> I have test on mx23evk board. Still see the same issues. >> >> >> >> On Wed, Jul 27, 2011 at 3:53 AM, Huang Shijie <b32955@freescale.com> wrote: >> >> > Hi, >> >> > >> >> > Thanks for your test. >> >> > >> >> >> Hi, >> >> >> >> >> >> It's not really working for me. >> >> >> I've applied all gpmi-nand driver patches and the dma driver patches. >> >> >> >> >> >> I have added following kernel parameters: >> >> >> mtdparts=gpmi-nand:20m(boot),-(user) ubi.mtd=1 root=ubi0:rootfs0 >> >> >> rootfstype=ubifs gpmi_debug_init >> >> >> >> >> >> During boot I get already get DMA timeout: >> >> >> [ 2.560000] [ start_dma_without_bch_irq : 392 ] DMA timeout, last DMA >> >> >> :1 >> >> >> [ 3.560000] [ start_dma_with_bch_irq : 427 ] bch timeout!!! >> >> >> ... >> >> >> (see log file in attach line 89) >> >> >> >> I still see this DMA timeout when booting. >> >> What kernel parameters do you use? I still use same as above. >> >> >> > Do you have an SD card in the system? I'm getting the same error when >> > accessing an SD card. Without SD card I can use the flash without any >> > errors. >> >> No SD card in the system. At least not on my mx23evk board. >> My real target hardware has a SDIO wifi chip. >> >> Are you also testing on the mx23evk board? Really strange it is not >> reproducible here then. >> Anyone using mx23evk please give: >> - revision number of board (I have tested on rev C1) >> - kernel parameter used (see previous mail for mine) >> > It's getting ever more strange. I only have problems with concurrent > access to the flash and SD-card when I do file system based accessed > to the SD card. > A 'dd if=/dev/mmcblk0 of=/dev/null' while excessively using the flash > works well, while mounting the SD card and doing an 'ls' produces > immediate BCH DMA timeouts. > > Perhaps someone can make anything out of that. I have checked and the function dma_irq_callback is never called during my tests. This means the DMA transfer does not even works once. Also no clue here ... > > > Lothar Waßmann > -- > ___________________________________________________________ > > Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen > Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 > Geschäftsführer: Matthias Kaussen > Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 > > www.karo-electronics.de | info@karo-electronics.de > ___________________________________________________________ >
WARNING: multiple messages have this Message-ID (diff)
From: koen.beel.barco@gmail.com (Koen Beel) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Date: Fri, 29 Jul 2011 17:00:48 +0200 [thread overview] Message-ID: <CAHMSPgPXnDVO630P9fnogQ0XvPSrwz0MYzXfXZLJoJNRf1gifA@mail.gmail.com> (raw) In-Reply-To: <20018.43621.688990.319528@ipc1.ka-ro> On Fri, Jul 29, 2011 at 2:41 PM, Lothar Wa?mann <LW@karo-electronics.de> wrote: > Hi, > > Koen Beel writes: >> Hi, >> >> On Fri, Jul 29, 2011 at 9:20 AM, Lothar Wa?mann <LW@karo-electronics.de> wrote: >> > Hi, >> > >> > Koen Beel writes: >> >> Hi, >> >> >> >> I have test on mx23evk board. Still see the same issues. >> >> >> >> On Wed, Jul 27, 2011 at 3:53 AM, Huang Shijie <b32955@freescale.com> wrote: >> >> > Hi, >> >> > >> >> > Thanks for your test. >> >> > >> >> >> Hi, >> >> >> >> >> >> It's not really working for me. >> >> >> I've applied all gpmi-nand driver patches and the dma driver patches. >> >> >> >> >> >> I have added following kernel parameters: >> >> >> mtdparts=gpmi-nand:20m(boot),-(user) ubi.mtd=1 root=ubi0:rootfs0 >> >> >> rootfstype=ubifs gpmi_debug_init >> >> >> >> >> >> During boot I get already get DMA timeout: >> >> >> [ ? ?2.560000] [ start_dma_without_bch_irq : 392 ] DMA timeout, last DMA >> >> >> :1 >> >> >> [ ? ?3.560000] [ start_dma_with_bch_irq : 427 ] bch timeout!!! >> >> >> ... >> >> >> (see log file in attach line 89) >> >> >> >> I still see this DMA timeout when booting. >> >> What kernel parameters do you use? I still use same as above. >> >> >> > Do you have an SD card in the system? I'm getting the same error when >> > accessing an SD card. Without SD card I can use the flash without any >> > errors. >> >> No SD card in the system. At least not on my mx23evk board. >> My real target hardware has a SDIO wifi chip. >> >> Are you also testing on the mx23evk board? Really strange it is not >> reproducible here then. >> Anyone using mx23evk please give: >> - revision number of board (I have tested on rev C1) >> - kernel parameter used (see previous mail for mine) >> > It's getting ever more strange. I only have problems with concurrent > access to the flash and SD-card when I do file system based accessed > to the SD card. > A 'dd if=/dev/mmcblk0 of=/dev/null' while excessively using the flash > works well, while mounting the SD card and doing an 'ls' produces > immediate BCH DMA timeouts. > > Perhaps someone can make anything out of that. I have checked and the function dma_irq_callback is never called during my tests. This means the DMA transfer does not even works once. Also no clue here ... > > > Lothar Wa?mann > -- > ___________________________________________________________ > > Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen > Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 > Gesch?ftsf?hrer: Matthias Kaussen > Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 > > www.karo-electronics.de | info at karo-electronics.de > ___________________________________________________________ >
next prev parent reply other threads:[~2011-07-29 15:00 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-07-21 6:47 [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Huang Shijie 2011-07-21 6:47 ` Huang Shijie 2011-07-21 6:47 ` [PATCH v8 1/3] MTD : add the common code for GPMI-NAND controller driver Huang Shijie 2011-07-21 6:47 ` Huang Shijie 2011-07-21 6:47 ` [PATCH v8 2/3] MTD : add helper functions library and header files for GPMI NAND driver Huang Shijie 2011-07-21 6:47 ` Huang Shijie 2011-07-21 6:47 ` [PATCH v8 3/3] MTD : add GPMI-NAND driver in the config and Makefile Huang Shijie 2011-07-21 6:47 ` Huang Shijie 2011-07-21 21:50 ` [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Wolfram Sang 2011-07-21 21:50 ` Wolfram Sang 2011-07-22 3:30 ` Huang Shijie 2011-07-22 3:30 ` Huang Shijie 2011-07-22 5:57 ` Shawn Guo 2011-07-22 5:57 ` Shawn Guo 2011-07-22 8:07 ` Huang Shijie 2011-07-22 8:07 ` Huang Shijie 2011-07-26 14:29 ` Koen Beel 2011-07-26 14:29 ` Koen Beel 2011-07-27 1:53 ` Huang Shijie 2011-07-27 1:53 ` Huang Shijie 2011-07-28 9:38 ` Koen Beel 2011-07-28 9:38 ` Koen Beel 2011-07-29 7:20 ` Lothar Waßmann 2011-07-29 7:20 ` Lothar Waßmann 2011-07-29 7:40 ` Koen Beel 2011-07-29 7:40 ` Koen Beel 2011-07-29 7:49 ` Lothar Waßmann 2011-07-29 7:49 ` Lothar Waßmann 2011-07-29 9:49 ` Huang Shijie 2011-07-29 9:49 ` Huang Shijie 2011-07-29 11:48 ` Koen Beel 2011-07-29 11:48 ` Koen Beel 2011-08-02 6:19 ` Huang Shijie 2011-08-02 6:19 ` Huang Shijie 2011-08-02 7:16 ` Shawn Guo 2011-08-02 7:16 ` Shawn Guo 2011-08-02 8:11 ` Shawn Guo 2011-08-02 8:11 ` Shawn Guo 2011-08-02 8:12 ` Shawn Guo 2011-08-02 8:12 ` Shawn Guo 2011-08-02 8:22 ` Huang Shijie 2011-08-02 8:22 ` Huang Shijie 2011-07-29 12:41 ` Lothar Waßmann 2011-07-29 12:41 ` Lothar Waßmann 2011-07-29 15:00 ` Koen Beel [this message] 2011-07-29 15:00 ` Koen Beel 2011-07-31 13:51 ` Marek Vasut 2011-07-31 13:51 ` Marek Vasut 2011-08-01 15:14 ` Koen Beel 2011-08-01 15:14 ` Koen Beel 2011-08-02 6:37 ` Huang Shijie 2011-08-02 6:37 ` Huang Shijie 2011-08-02 7:33 ` Koen Beel 2011-08-02 7:33 ` Koen Beel 2011-08-02 7:44 ` Huang Shijie 2011-08-02 7:44 ` Huang Shijie 2011-08-02 8:55 ` Koen Beel 2011-08-02 8:55 ` Koen Beel 2011-08-02 8:49 ` Huang Shijie 2011-08-02 8:49 ` Huang Shijie 2011-08-02 9:29 ` Koen Beel 2011-08-02 9:29 ` Koen Beel 2011-08-02 10:37 ` Huang Shijie 2011-08-02 10:37 ` Huang Shijie 2011-08-02 12:32 ` Koen Beel 2011-08-02 12:32 ` Koen Beel 2011-08-02 6:21 ` Huang Shijie 2011-08-02 6:21 ` Huang Shijie 2011-08-03 10:37 ` Wolfram Sang 2011-08-03 10:37 ` Wolfram Sang 2011-08-03 12:00 ` Koen Beel 2011-08-03 12:00 ` Koen Beel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAHMSPgPXnDVO630P9fnogQ0XvPSrwz0MYzXfXZLJoJNRf1gifA@mail.gmail.com \ --to=koen.beel.barco@gmail.com \ --cc=LW@karo-electronics.de \ --cc=arnd@arndb.de \ --cc=b32955@freescale.com \ --cc=dedekind1@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mtd@lists.infradead.org \ --cc=shawn.guo@freescale.com \ --cc=shijie8@gmail.com \ --cc=w.sang@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.