* [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-15 11:51 ` Enric Balletbo i Serra
0 siblings, 0 replies; 11+ messages in thread
From: Enric Balletbo i Serra @ 2019-02-15 11:51 UTC (permalink / raw)
To: Heiko Stuebner
Cc: mark.rutland, devicetree, linux-kernel, linux-rockchip,
Rob Herring, kernel, linux-arm-kernel
In order to use earlycon, the stdout-path property needs to be set
in the chosen node.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index b54746df3661..8890967ed572 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -62,6 +62,10 @@
pwm-off-delay-ms = <10>;
};
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-15 11:51 ` Enric Balletbo i Serra
0 siblings, 0 replies; 11+ messages in thread
From: Enric Balletbo i Serra @ 2019-02-15 11:51 UTC (permalink / raw)
To: Heiko Stuebner
Cc: mark.rutland, devicetree, linux-kernel, linux-rockchip,
Rob Herring, kernel, linux-arm-kernel
In order to use earlycon, the stdout-path property needs to be set
in the chosen node.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index b54746df3661..8890967ed572 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -62,6 +62,10 @@
pwm-off-delay-ms = <10>;
};
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
2019-02-15 11:51 ` Enric Balletbo i Serra
@ 2019-02-15 23:08 ` Heiko Stübner
-1 siblings, 0 replies; 11+ messages in thread
From: Heiko Stübner @ 2019-02-15 23:08 UTC (permalink / raw)
To: Enric Balletbo i Serra, dianders
Cc: mark.rutland, devicetree, linux-kernel, linux-rockchip,
Rob Herring, kernel, linux-arm-kernel
Hi Enric,
Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> In order to use earlycon, the stdout-path property needs to be set
> in the chosen node.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
What's the reason for adding this only for the Chromebook variants?
Uart2 is pretty much the standard output for all devices, so I'd assume
at least all veyron boards should use uart2 as well, making this ideally
live in the rk3288-veyron.dtsi instead?
Heiko
> ---
>
> arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index
> b54746df3661..8890967ed572 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> @@ -62,6 +62,10 @@
> pwm-off-delay-ms = <10>;
> };
>
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> gpio-charger {
> compatible = "gpio-charger";
> charger-type = "mains";
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-15 23:08 ` Heiko Stübner
0 siblings, 0 replies; 11+ messages in thread
From: Heiko Stübner @ 2019-02-15 23:08 UTC (permalink / raw)
To: Enric Balletbo i Serra, dianders
Cc: mark.rutland, devicetree, linux-kernel, linux-rockchip,
Rob Herring, kernel, linux-arm-kernel
Hi Enric,
Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> In order to use earlycon, the stdout-path property needs to be set
> in the chosen node.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
What's the reason for adding this only for the Chromebook variants?
Uart2 is pretty much the standard output for all devices, so I'd assume
at least all veyron boards should use uart2 as well, making this ideally
live in the rk3288-veyron.dtsi instead?
Heiko
> ---
>
> arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index
> b54746df3661..8890967ed572 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> @@ -62,6 +62,10 @@
> pwm-off-delay-ms = <10>;
> };
>
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> gpio-charger {
> compatible = "gpio-charger";
> charger-type = "mains";
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
2019-02-15 23:08 ` Heiko Stübner
@ 2019-02-16 1:13 ` Alexandru M Stan
-1 siblings, 0 replies; 11+ messages in thread
From: Alexandru M Stan @ 2019-02-16 1:13 UTC (permalink / raw)
To: Heiko Stübner
Cc: Enric Balletbo i Serra, Doug Anderson, Mark Rutland, devicetree,
linux-kernel, open list:ARM/Rockchip SoC...,
Rob Herring, kernel, linux-arm-kernel
On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Hi Enric,
>
> Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > In order to use earlycon, the stdout-path property needs to be set
> > in the chosen node.
> >
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>
> What's the reason for adding this only for the Chromebook variants?
> Uart2 is pretty much the standard output for all devices, so I'd assume
> at least all veyron boards should use uart2 as well, making this ideally
> live in the rk3288-veyron.dtsi instead?
Yep, all veyriants use uart 2, even when they're not chromebooks.
Feel free to put it in the other file instead.
Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
while debugging.
The rk3288-veyron-chromebook.dtsi file is more for things that make
a chromebook portable. Ex: built in display, lid switch, cros-ec.
Note how we have no uart2 references either in our tree in the
chromebook specific dtsi:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
Alexandru Stan (amstan)
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-16 1:13 ` Alexandru M Stan
0 siblings, 0 replies; 11+ messages in thread
From: Alexandru M Stan @ 2019-02-16 1:13 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Rutland, devicetree, Doug Anderson, linux-kernel,
open list:ARM/Rockchip SoC...,
Rob Herring, Enric Balletbo i Serra, kernel, linux-arm-kernel
On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Hi Enric,
>
> Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > In order to use earlycon, the stdout-path property needs to be set
> > in the chosen node.
> >
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>
> What's the reason for adding this only for the Chromebook variants?
> Uart2 is pretty much the standard output for all devices, so I'd assume
> at least all veyron boards should use uart2 as well, making this ideally
> live in the rk3288-veyron.dtsi instead?
Yep, all veyriants use uart 2, even when they're not chromebooks.
Feel free to put it in the other file instead.
Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
while debugging.
The rk3288-veyron-chromebook.dtsi file is more for things that make
a chromebook portable. Ex: built in display, lid switch, cros-ec.
Note how we have no uart2 references either in our tree in the
chromebook specific dtsi:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
Alexandru Stan (amstan)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
2019-02-16 1:13 ` Alexandru M Stan
@ 2019-02-16 20:28 ` Heiko Stuebner
-1 siblings, 0 replies; 11+ messages in thread
From: Heiko Stuebner @ 2019-02-16 20:28 UTC (permalink / raw)
To: Alexandru M Stan
Cc: Enric Balletbo i Serra, Doug Anderson, Mark Rutland, devicetree,
linux-kernel, open list:ARM/Rockchip SoC...,
Rob Herring, kernel, linux-arm-kernel
Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> >
> > Hi Enric,
> >
> > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > In order to use earlycon, the stdout-path property needs to be set
> > > in the chosen node.
> > >
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >
> > What's the reason for adding this only for the Chromebook variants?
> > Uart2 is pretty much the standard output for all devices, so I'd assume
> > at least all veyron boards should use uart2 as well, making this ideally
> > live in the rk3288-veyron.dtsi instead?
>
> Yep, all veyriants use uart 2, even when they're not chromebooks.
> Feel free to put it in the other file instead.
>
> Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> while debugging.
>
> The rk3288-veyron-chromebook.dtsi file is more for things that make
> a chromebook portable. Ex: built in display, lid switch, cros-ec.
>
> Note how we have no uart2 references either in our tree in the
> chromebook specific dtsi:
> https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
thanks for the confirmation :-) .
I've moved the choosen node over to veyron.dtsi and applied the result
for 5.1
Thanks
Heiko
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-16 20:28 ` Heiko Stuebner
0 siblings, 0 replies; 11+ messages in thread
From: Heiko Stuebner @ 2019-02-16 20:28 UTC (permalink / raw)
To: Alexandru M Stan
Cc: Mark Rutland, devicetree, Doug Anderson, linux-kernel,
open list:ARM/Rockchip SoC...,
Rob Herring, Enric Balletbo i Serra, kernel, linux-arm-kernel
Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> >
> > Hi Enric,
> >
> > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > In order to use earlycon, the stdout-path property needs to be set
> > > in the chosen node.
> > >
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >
> > What's the reason for adding this only for the Chromebook variants?
> > Uart2 is pretty much the standard output for all devices, so I'd assume
> > at least all veyron boards should use uart2 as well, making this ideally
> > live in the rk3288-veyron.dtsi instead?
>
> Yep, all veyriants use uart 2, even when they're not chromebooks.
> Feel free to put it in the other file instead.
>
> Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> while debugging.
>
> The rk3288-veyron-chromebook.dtsi file is more for things that make
> a chromebook portable. Ex: built in display, lid switch, cros-ec.
>
> Note how we have no uart2 references either in our tree in the
> chromebook specific dtsi:
> https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
thanks for the confirmation :-) .
I've moved the choosen node over to veyron.dtsi and applied the result
for 5.1
Thanks
Heiko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
2019-02-16 20:28 ` Heiko Stuebner
(?)
@ 2019-02-17 20:38 ` Enric Balletbo Serra
-1 siblings, 0 replies; 11+ messages in thread
From: Enric Balletbo Serra @ 2019-02-17 20:38 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Alexandru M Stan, Mark Rutland, devicetree, Doug Anderson,
linux-kernel, open list:ARM/Rockchip SoC...,
Rob Herring, Enric Balletbo i Serra, kernel, Linux ARM
Hi,
Missatge de Heiko Stuebner <heiko@sntech.de> del dia ds., 16 de febr.
2019 a les 21:28:
>
> Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> > On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> > >
> > > Hi Enric,
> > >
> > > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > > In order to use earlycon, the stdout-path property needs to be set
> > > > in the chosen node.
> > > >
> > > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > >
> > > What's the reason for adding this only for the Chromebook variants?
> > > Uart2 is pretty much the standard output for all devices, so I'd assume
> > > at least all veyron boards should use uart2 as well, making this ideally
> > > live in the rk3288-veyron.dtsi instead?
> >
> > Yep, all veyriants use uart 2, even when they're not chromebooks.
> > Feel free to put it in the other file instead.
> >
> > Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> > Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> > while debugging.
> >
> > The rk3288-veyron-chromebook.dtsi file is more for things that make
> > a chromebook portable. Ex: built in display, lid switch, cros-ec.
> >
> > Note how we have no uart2 references either in our tree in the
> > chromebook specific dtsi:
> > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
>
> thanks for the confirmation :-) .
>
> I've moved the choosen node over to veyron.dtsi and applied the result
> for 5.1
>
Perfect thanks, I was unsure about the non-chromebooks devices.
> Thanks
> Heiko
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-17 20:38 ` Enric Balletbo Serra
0 siblings, 0 replies; 11+ messages in thread
From: Enric Balletbo Serra @ 2019-02-17 20:38 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA,
Alexandru M Stan, linux-kernel, Doug Anderson,
open list:ARM/Rockchip SoC...,
Rob Herring, Enric Balletbo i Serra,
kernel-ZGY8ohtN/8qB+jHODAdFcQ, Linux ARM
Hi,
Missatge de Heiko Stuebner <heiko@sntech.de> del dia ds., 16 de febr.
2019 a les 21:28:
>
> Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> > On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> > >
> > > Hi Enric,
> > >
> > > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > > In order to use earlycon, the stdout-path property needs to be set
> > > > in the chosen node.
> > > >
> > > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > >
> > > What's the reason for adding this only for the Chromebook variants?
> > > Uart2 is pretty much the standard output for all devices, so I'd assume
> > > at least all veyron boards should use uart2 as well, making this ideally
> > > live in the rk3288-veyron.dtsi instead?
> >
> > Yep, all veyriants use uart 2, even when they're not chromebooks.
> > Feel free to put it in the other file instead.
> >
> > Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> > Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> > while debugging.
> >
> > The rk3288-veyron-chromebook.dtsi file is more for things that make
> > a chromebook portable. Ex: built in display, lid switch, cros-ec.
> >
> > Note how we have no uart2 references either in our tree in the
> > chromebook specific dtsi:
> > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
>
> thanks for the confirmation :-) .
>
> I've moved the choosen node over to veyron.dtsi and applied the result
> for 5.1
>
Perfect thanks, I was unsure about the non-chromebooks devices.
> Thanks
> Heiko
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
@ 2019-02-17 20:38 ` Enric Balletbo Serra
0 siblings, 0 replies; 11+ messages in thread
From: Enric Balletbo Serra @ 2019-02-17 20:38 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Mark Rutland, devicetree, Alexandru M Stan, linux-kernel,
Doug Anderson, open list:ARM/Rockchip SoC...,
Rob Herring, Enric Balletbo i Serra, kernel, Linux ARM
Hi,
Missatge de Heiko Stuebner <heiko@sntech.de> del dia ds., 16 de febr.
2019 a les 21:28:
>
> Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> > On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> > >
> > > Hi Enric,
> > >
> > > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > > In order to use earlycon, the stdout-path property needs to be set
> > > > in the chosen node.
> > > >
> > > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > >
> > > What's the reason for adding this only for the Chromebook variants?
> > > Uart2 is pretty much the standard output for all devices, so I'd assume
> > > at least all veyron boards should use uart2 as well, making this ideally
> > > live in the rk3288-veyron.dtsi instead?
> >
> > Yep, all veyriants use uart 2, even when they're not chromebooks.
> > Feel free to put it in the other file instead.
> >
> > Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> > Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> > while debugging.
> >
> > The rk3288-veyron-chromebook.dtsi file is more for things that make
> > a chromebook portable. Ex: built in display, lid switch, cros-ec.
> >
> > Note how we have no uart2 references either in our tree in the
> > chromebook specific dtsi:
> > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
>
> thanks for the confirmation :-) .
>
> I've moved the choosen node over to veyron.dtsi and applied the result
> for 5.1
>
Perfect thanks, I was unsure about the non-chromebooks devices.
> Thanks
> Heiko
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-02-17 20:38 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-15 11:51 [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks Enric Balletbo i Serra
2019-02-15 11:51 ` Enric Balletbo i Serra
2019-02-15 23:08 ` Heiko Stübner
2019-02-15 23:08 ` Heiko Stübner
2019-02-16 1:13 ` Alexandru M Stan
2019-02-16 1:13 ` Alexandru M Stan
2019-02-16 20:28 ` Heiko Stuebner
2019-02-16 20:28 ` Heiko Stuebner
2019-02-17 20:38 ` Enric Balletbo Serra
2019-02-17 20:38 ` Enric Balletbo Serra
2019-02-17 20:38 ` Enric Balletbo Serra
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.