* [PATCH] arm64: zynqmp: Switch zcu100 revC to use firmware clock driver
@ 2020-01-07 11:45 Michal Simek
2020-01-16 7:09 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Michal Simek @ 2020-01-07 11:45 UTC (permalink / raw)
To: u-boot
There is no issue with using firmware based driver instead of fixed clock
one.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zcu100-revC.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index d1b0dab1c6d5..c012f4c99b0e 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
--
2.24.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] arm64: zynqmp: Switch zcu100 revC to use firmware clock driver
2020-01-07 11:45 [PATCH] arm64: zynqmp: Switch zcu100 revC to use firmware clock driver Michal Simek
@ 2020-01-16 7:09 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2020-01-16 7:09 UTC (permalink / raw)
To: u-boot
út 7. 1. 2020 v 12:45 odesílatel Michal Simek <michal.simek@xilinx.com> napsal:
>
> There is no issue with using firmware based driver instead of fixed clock
> one.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/dts/zynqmp-zcu100-revC.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
> index d1b0dab1c6d5..c012f4c99b0e 100644
> --- a/arch/arm/dts/zynqmp-zcu100-revC.dts
> +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
> @@ -11,7 +11,7 @@
> /dts-v1/;
>
> #include "zynqmp.dtsi"
> -#include "zynqmp-clk.dtsi"
> +#include "zynqmp-clk-ccf.dtsi"
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/gpio/gpio.h>
> --
> 2.24.0
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-16 7:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-07 11:45 [PATCH] arm64: zynqmp: Switch zcu100 revC to use firmware clock driver Michal Simek
2020-01-16 7:09 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.