[U-Boot] [PATCH] zynqmp: configs: Add single nand flash mini u-boot configuration

[U-Boot] [PATCH] zynqmp: configs: Add single nand flash mini u-boot configuration

[Michal Simek]

From: T Karthik Reddy <t.karthik.reddy@xilinx.com>

This patch adds configuration for single nand flash mini u-boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 .../xilinx_zynqmp_mini_nand_single_defconfig  | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 configs/xilinx_zynqmp_mini_nand_single_defconfig

diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig
new file mode 100644
index 000000000000..f2c2b175275d
--- /dev/null
+++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_nand"
+CONFIG_SYS_ICACHE_OFF=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_ENV_SIZE=0x80
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_CMD_ZYNQMP is not set
+CONFIG_FIT=y
+CONFIG_SUPPORT_RAW_INITRD=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+# CONFIG_AUTOBOOT is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_DM is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_MP is not set
+# CONFIG_PARTITIONS is not set
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
+# CONFIG_NET is not set
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_ARASAN=y
+# CONFIG_EFI_LOADER is not set
-- 
2.17.1

[U-Boot] [PATCH] zynqmp: configs: Add single nand flash mini u-boot configuration

[Michal Simek]

po 14. 10. 2019 v 15:01 odesílatel Michal Simek
<michal.simek@xilinx.com> napsal:
>
> From: T Karthik Reddy <t.karthik.reddy@xilinx.com>
>
> This patch adds configuration for single nand flash mini u-boot.
>
> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
>  .../xilinx_zynqmp_mini_nand_single_defconfig  | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 configs/xilinx_zynqmp_mini_nand_single_defconfig
>
> diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig
> new file mode 100644
> index 000000000000..f2c2b175275d
> --- /dev/null
> +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig
> @@ -0,0 +1,51 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_nand"
> +CONFIG_SYS_ICACHE_OFF=y
> +CONFIG_ARCH_ZYNQMP=y
> +CONFIG_SYS_TEXT_BASE=0x10000
> +CONFIG_ENV_SIZE=0x80
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_CMD_ZYNQMP is not set
> +CONFIG_FIT=y
> +CONFIG_SUPPORT_RAW_INITRD=y
> +# CONFIG_BOARD_LATE_INIT is not set
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_BOARD_EARLY_INIT_R=y
> +# CONFIG_CMDLINE_EDITING is not set
> +# CONFIG_AUTO_COMPLETE is not set
> +# CONFIG_SYS_LONGHELP is not set
> +# CONFIG_AUTOBOOT is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_CONSOLE is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_BOOTM is not set
> +# CONFIG_CMD_BOOTI is not set
> +# CONFIG_CMD_GO is not set
> +# CONFIG_CMD_RUN is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_EDITENV is not set
> +# CONFIG_CMD_SAVEENV is not set
> +# CONFIG_CMD_ENV_EXISTS is not set
> +# CONFIG_CMD_CRC32 is not set
> +# CONFIG_CMD_DM is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +# CONFIG_CMD_ECHO is not set
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SOURCE is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_MP is not set
> +# CONFIG_PARTITIONS is not set
> +CONFIG_OF_EMBED=y
> +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
> +# CONFIG_NET is not set
> +# CONFIG_DM_WARN is not set
> +# CONFIG_DM_DEVICE_REMOVE is not set
> +# CONFIG_MMC is not set
> +CONFIG_NAND=y
> +CONFIG_NAND_ARASAN=y
> +# CONFIG_EFI_LOADER is not set
> --
> 2.17.1
>

Applied.
M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs