* "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN]
@ 2020-12-23 8:32 Bruce Liu
0 siblings, 0 replies; 5+ messages in thread
From: Bruce Liu @ 2020-12-23 8:32 UTC (permalink / raw)
To: mkubecek, netdev; +Cc: shlei
Hi Michal Kubecek and Network dev team,
Good day! Hope you are doing well.
This is Bruce from China, and please allow me to cc Rudy from Cisco
Systems in China team.
We are facing a weird behavior about "master-slave configuration"
function in ethtool.
Please correct me if I am wrong....
As you know, start from ethtool 5.8, "master/slave configuration
support" added.
https://lwn.net/Articles/828044/
========================================================================
Appeal:
Confirm and discuss workaround
========================================================================
Issue description:
As we test in lab, no "master-slave" option supported.
========================================================================
Issue reproduce:
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
========================================================================
Environment:
debian-live-10.7.0-amd64-standard.iso
Kernel 5.4.79
ethtool 5.10
Source code: https://mirrors.edge.kernel.org/pub/software/network/ethtool/ethtool-5.10.tar.xz
========================================================================
Troubleshooting:
root@raspberrypi:~# ethtool -h
ethtool version 5.10
Usage:
ethtool [ FLAGS ] DEVNAME Display standard information
about device
ethtool [ FLAGS ] -s|--change DEVNAME Change generic options
[ speed %d ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre|da ]
[ mdix auto|on|off ]
[ autoneg on|off ]
[ advertise %x[/%x] | mode on|off ... [--] ]
[ phyad %d ]
[ xcvr internal|external ]
[ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]
[ sopass %x:%x:%x:%x:%x:%x ]
[ msglvl %d[/%d] | type on|off ... [--] ]
[ master-slave
master-preferred|slave-preferred|master-force|slave-force ]
root@raspberrypi:~# ethtool -s eth0 [double tab here]
advertise autoneg duplex mdix msglvl phyad port
speed wol xcvr
========================================
Review 5.10 source code:
ethtool.c line:5616
static const struct option args[] = {
{
.opts = "-s|--change",
.func = do_sset,
.nlfunc = nl_sset,
.help = "Change generic options",
.xhelp = " [ speed %d ]\n"
" [ duplex half|full ]\n"
" [ port tp|aui|bnc|mii|fibre|da ]\n"
" [ mdix auto|on|off ]\n"
" [ autoneg on|off ]\n"
" [ advertise %x[/%x] | mode on|off ... [--] ]\n"
" [ phyad %d ]\n"
" [ xcvr internal|external ]\n"
" [ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]\n"
" [ sopass %x:%x:%x:%x:%x:%x ]\n"
" [ msglvl %d[/%d] | type on|off ... [--] ]\n"
" [ master-slave master-preferred|slave-preferred|master-force|slave-force ]\n"
},
========================================
ethtool.c line:2912 do_sset function
There is NOT an "else if" to catch "master-slave" option, and the
options matched final else, and print an error message "ethtool: bad
command line argument(s)\n""For more information run ethtool -h\n""
ethtool.c line: 3069
} else {
exit_bad_args();
========================================
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
Look forward to your reply.
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN]
2020-12-27 9:46 ` Michal Kubecek
@ 2020-12-28 13:35 ` Rudy Lei (shlei)
0 siblings, 0 replies; 5+ messages in thread
From: Rudy Lei (shlei) @ 2020-12-28 13:35 UTC (permalink / raw)
To: Michal Kubecek, Bruce LIU; +Cc: netdev
Hi Michal,
Merry Christmas and thanks a lot for the prompt reply.
After upgraded the kernel to 5.10 and we did see the expected logs:
[root@shlei-dev-machine ~]# ethtool -s ens32 master-slave preferred-master
netlink error: master/slave configuration not supported by device (offset 36)
netlink error: Operation not supported
Best Regards,
Rudy
On 2020/12/27, 5:46 PM, "Michal Kubecek" <mkubecek@suse.cz> wrote:
On Sun, Dec 27, 2020 at 12:34:09PM +0800, Bruce LIU wrote:
> Hi Michal Kubecek and Network dev team,
>
> Good day! Hope you are doing well.
> This is Bruce from China, and please allow me to cc Rudy from Cisco Systems
> in China team.
>
> We are facing a weird behavior about "master-slave configuration" function
> in ethtool.
> Please correct me if I am wrong....
>
> As you know, start from ethtool 5.8, "master/slave configuration support"
> added.
> https://lwn.net/Articles/828044/
>
> ========================================================================
> Appeal:
> Confirm and discuss workaround
>
> ========================================================================
> Issue description:
> As we test in lab, no "master-slave" option supported.
>
> ========================================================================
> Issue reproduce:
> root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
> ethtool: bad command line argument(s)
> For more information run ethtool -h
>
> ========================================================================
> Environment:
> debian-live-10.7.0-amd64-standard.iso
> Kernel 5.4.79
This is the problem. Kernel support for this feature was added in
5.8-rc1 so that your kernel does not have it and there is no chance it
could possibly work. Newer ethtool has support for this feature but
kernel must support it as well for it to actually work.
But I agree that the error message is misleading. We handle subcommands
supported only in netlink with proper error message when ioctl fallback
is used but we don't do the same for new parameters of existing
subcommands which are generally supported by ioctl code. That's why the
command line parser used by ioctl code does not recognize the new
parameter and handles it as a syntax error.
We'll need to handle new parameters in ioctl parser so that it produces
more meaningful error for parameters only supported via netlink. Long
term, the proper solution would probably be using one parser for both
netlink and ioctl but that was something I wanted to avoid for now to
reduce the risk of introducing subtle changes in behaviour of existing
code.
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN]
2020-12-27 4:34 Bruce LIU
@ 2020-12-27 9:46 ` Michal Kubecek
2020-12-28 13:35 ` Rudy Lei (shlei)
0 siblings, 1 reply; 5+ messages in thread
From: Michal Kubecek @ 2020-12-27 9:46 UTC (permalink / raw)
To: Bruce LIU; +Cc: netdev, shlei
On Sun, Dec 27, 2020 at 12:34:09PM +0800, Bruce LIU wrote:
> Hi Michal Kubecek and Network dev team,
>
> Good day! Hope you are doing well.
> This is Bruce from China, and please allow me to cc Rudy from Cisco Systems
> in China team.
>
> We are facing a weird behavior about "master-slave configuration" function
> in ethtool.
> Please correct me if I am wrong....
>
> As you know, start from ethtool 5.8, "master/slave configuration support"
> added.
> https://lwn.net/Articles/828044/
>
> ========================================================================
> Appeal:
> Confirm and discuss workaround
>
> ========================================================================
> Issue description:
> As we test in lab, no "master-slave" option supported.
>
> ========================================================================
> Issue reproduce:
> root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
> ethtool: bad command line argument(s)
> For more information run ethtool -h
>
> ========================================================================
> Environment:
> debian-live-10.7.0-amd64-standard.iso
> Kernel 5.4.79
This is the problem. Kernel support for this feature was added in
5.8-rc1 so that your kernel does not have it and there is no chance it
could possibly work. Newer ethtool has support for this feature but
kernel must support it as well for it to actually work.
But I agree that the error message is misleading. We handle subcommands
supported only in netlink with proper error message when ioctl fallback
is used but we don't do the same for new parameters of existing
subcommands which are generally supported by ioctl code. That's why the
command line parser used by ioctl code does not recognize the new
parameter and handles it as a syntax error.
We'll need to handle new parameters in ioctl parser so that it produces
more meaningful error for parameters only supported via netlink. Long
term, the proper solution would probably be using one parser for both
netlink and ioctl but that was something I wanted to avoid for now to
reduce the risk of introducing subtle changes in behaviour of existing
code.
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN]
@ 2020-12-27 4:34 Bruce LIU
2020-12-27 9:46 ` Michal Kubecek
0 siblings, 1 reply; 5+ messages in thread
From: Bruce LIU @ 2020-12-27 4:34 UTC (permalink / raw)
To: mkubecek, netdev; +Cc: shlei
Hi Michal Kubecek and Network dev team,
Good day! Hope you are doing well.
This is Bruce from China, and please allow me to cc Rudy from Cisco
Systems in China team.
We are facing a weird behavior about "master-slave configuration"
function in ethtool.
Please correct me if I am wrong....
As you know, start from ethtool 5.8, "master/slave configuration
support" added.
https://lwn.net/Articles/828044/
========================================================================
Appeal:
Confirm and discuss workaround
========================================================================
Issue description:
As we test in lab, no "master-slave" option supported.
========================================================================
Issue reproduce:
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
========================================================================
Environment:
debian-live-10.7.0-amd64-standard.iso
Kernel 5.4.79
ethtool 5.10
Source code:
https://mirrors.edge.kernel.org/pub/software/network/ethtool/ethtool-5.10.tar.xz
========================================================================
Troubleshooting:
root@raspberrypi:~# ethtool -h
ethtool version 5.10
Usage:
ethtool [ FLAGS ] DEVNAME Display standard information
about device
ethtool [ FLAGS ] -s|--change DEVNAME Change generic options
[ speed %d ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre|da ]
[ mdix auto|on|off ]
[ autoneg on|off ]
[ advertise %x[/%x] | mode on|off ... [--] ]
[ phyad %d ]
[ xcvr internal|external ]
[ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]
[ sopass %x:%x:%x:%x:%x:%x ]
[ msglvl %d[/%d] | type on|off ... [--] ]
[ master-slave
master-preferred|slave-preferred|master-force|slave-force ]
root@raspberrypi:~# ethtool -s eth0 [double tab here]
advertise autoneg duplex mdix msglvl phyad port
speed wol xcvr
========================================
Review 5.10 source code:
ethtool.c line:5616
static const struct option args[] = {
{
.opts = "-s|--change",
.func = do_sset,
.nlfunc = nl_sset,
.help = "Change generic options",
.xhelp = " [ speed %d ]\n"
" [ duplex half|full ]\n"
" [ port tp|aui|bnc|mii|fibre|da ]\n"
" [ mdix auto|on|off ]\n"
" [ autoneg on|off ]\n"
" [ advertise %x[/%x] | mode on|off ... [--] ]\n"
" [ phyad %d ]\n"
" [ xcvr internal|external ]\n"
" [ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]\n"
" [ sopass %x:%x:%x:%x:%x:%x ]\n"
" [ msglvl %d[/%d] | type on|off ... [--] ]\n"
" [ master-slave
master-preferred|slave-preferred|master-force|slave-force ]\n"
},
========================================
ethtool.c line:2912 do_sset function
There is NOT an "else if" to catch "master-slave" option, and the
options matched final else, and print an error message "ethtool: bad
command line argument(s)\n""For more information run ethtool -h\n""
ethtool.c line: 3069
} else {
exit_bad_args();
========================================
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
Look forward to your reply.
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
--
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN]
[not found] <CAHZX3B_KBEzny0ejSP73q+1Y-n=f=39jTXjzBCDB8Lsrn5U2gg@mail.gmail.com>
@ 2020-12-23 8:31 ` Bruce Liu
0 siblings, 0 replies; 5+ messages in thread
From: Bruce Liu @ 2020-12-23 8:31 UTC (permalink / raw)
To: mkubecek, netdev; +Cc: shlei
Hi Michal Kubecek and Network dev team,
Good day! Hope you are doing well.
This is Bruce from China, and please allow me to cc Rudy from Cisco
Systems in China team.
We are facing a weird behavior about "master-slave configuration"
function in ethtool.
Please correct me if I am wrong....
As you know, start from ethtool 5.8, "master/slave configuration
support" added.
https://lwn.net/Articles/828044/
========================================================================
Appeal:
Confirm and discuss workaround
========================================================================
Issue description:
As we test in lab, no "master-slave" option supported.
========================================================================
Issue reproduce:
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
========================================================================
Environment:
debian-live-10.7.0-amd64-standard.iso
Kernel 5.4.79
ethtool 5.10
Source code: https://mirrors.edge.kernel.org/pub/software/network/ethtool/ethtool-5.10.tar.xz
========================================================================
Troubleshooting:
root@raspberrypi:~# ethtool -h
ethtool version 5.10
Usage:
ethtool [ FLAGS ] DEVNAME Display standard information
about device
ethtool [ FLAGS ] -s|--change DEVNAME Change generic options
[ speed %d ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre|da ]
[ mdix auto|on|off ]
[ autoneg on|off ]
[ advertise %x[/%x] | mode on|off ... [--] ]
[ phyad %d ]
[ xcvr internal|external ]
[ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]
[ sopass %x:%x:%x:%x:%x:%x ]
[ msglvl %d[/%d] | type on|off ... [--] ]
[ master-slave
master-preferred|slave-preferred|master-force|slave-force ]
root@raspberrypi:~# ethtool -s eth0 [double tab here]
advertise autoneg duplex mdix msglvl phyad port
speed wol xcvr
========================================
Review 5.10 source code:
ethtool.c line:5616
static const struct option args[] = {
{
.opts = "-s|--change",
.func = do_sset,
.nlfunc = nl_sset,
.help = "Change generic options",
.xhelp = " [ speed %d ]\n"
" [ duplex half|full ]\n"
" [ port tp|aui|bnc|mii|fibre|da ]\n"
" [ mdix auto|on|off ]\n"
" [ autoneg on|off ]\n"
" [ advertise %x[/%x] | mode on|off ... [--] ]\n"
" [ phyad %d ]\n"
" [ xcvr internal|external ]\n"
" [ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]\n"
" [ sopass %x:%x:%x:%x:%x:%x ]\n"
" [ msglvl %d[/%d] | type on|off ... [--] ]\n"
" [ master-slave master-preferred|slave-preferred|master-force|slave-force ]\n"
},
========================================
ethtool.c line:2912 do_sset function
There is NOT an "else if" to catch "master-slave" option, and the
options matched final else, and print an error message "ethtool: bad
command line argument(s)\n""For more information run ethtool -h\n""
ethtool.c line: 3069
} else {
exit_bad_args();
========================================
root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
ethtool: bad command line argument(s)
For more information run ethtool -h
Look forward to your reply.
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
Cheers!
Bruce Liu (UTC +08)
Email: ccieliu@gmail.com
On Wed, Dec 23, 2020 at 3:49 PM Bruce Liu <ccieliu@gmail.com> wrote:
>
> Hi Michal Kubecek and Network dev team,
>
> Good day! Hope you are doing well.
> This is Bruce from China, and please allow me to cc Rudy from Cisco Systems in China team.
>
> We are facing a weird behavior about "master-slave configuration" function in ethtool.
> Please correct me if I am wrong....
>
> As you know, start from ethtool 5.8, "master/slave configuration support" added.
> https://lwn.net/Articles/828044/
>
> ========================================================================
> Appeal:
> Confirm and discuss workaround
>
> ========================================================================
> Issue description:
> As we test in lab, no "master-slave" option supported.
>
> ========================================================================
> Issue reproduce:
> root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
> ethtool: bad command line argument(s)
> For more information run ethtool -h
>
> ========================================================================
> Environment:
> debian-live-10.7.0-amd64-standard.iso
> Kernel 5.4.79
> ethtool 5.10
> Source code: https://mirrors.edge.kernel.org/pub/software/network/ethtool/ethtool-5.10.tar.xz
>
> ========================================================================
> Troubleshooting:
> root@raspberrypi:~# ethtool -h
> ethtool version 5.10
> Usage:
> ethtool [ FLAGS ] DEVNAME Display standard information about device
> ethtool [ FLAGS ] -s|--change DEVNAME Change generic options
> [ speed %d ]
> [ duplex half|full ]
> [ port tp|aui|bnc|mii|fibre|da ]
> [ mdix auto|on|off ]
> [ autoneg on|off ]
> [ advertise %x[/%x] | mode on|off ... [--] ]
> [ phyad %d ]
> [ xcvr internal|external ]
> [ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]
> [ sopass %x:%x:%x:%x:%x:%x ]
> [ msglvl %d[/%d] | type on|off ... [--] ]
> [ master-slave master-preferred|slave-preferred|master-force|slave-force ]
>
> root@raspberrypi:~# ethtool -s eth0 [double tab here]
> advertise autoneg duplex mdix msglvl phyad port speed wol xcvr
>
> ========================================
> Review 5.10 source code:
> ethtool.c line:5616
>
> static const struct option args[] = {
> {
> .opts = "-s|--change",
> .func = do_sset,
> .nlfunc = nl_sset,
> .help = "Change generic options",
> .xhelp = " [ speed %d ]\n"
> " [ duplex half|full ]\n"
> " [ port tp|aui|bnc|mii|fibre|da ]\n"
> " [ mdix auto|on|off ]\n"
> " [ autoneg on|off ]\n"
> " [ advertise %x[/%x] | mode on|off ... [--] ]\n"
> " [ phyad %d ]\n"
> " [ xcvr internal|external ]\n"
> " [ wol %d[/%d] | p|u|m|b|a|g|s|f|d... ]\n"
> " [ sopass %x:%x:%x:%x:%x:%x ]\n"
> " [ msglvl %d[/%d] | type on|off ... [--] ]\n"
> " [ master-slave master-preferred|slave-preferred|master-force|slave-force ]\n"
> },
>
> ========================================
> ethtool.c line:2912 do_sset function
> There is NOT an "else if" to catch "master-slave" option, and the options matched final else, and print an error message "ethtool: bad command line argument(s)\n""For more information run ethtool -h\n""
>
> ethtool.c line: 3069
>
> } else {
> exit_bad_args();
>
> ========================================
> root@raspberrypi:~# ethtool -s eth0 master-slave master-preferred
> ethtool: bad command line argument(s)
> For more information run ethtool -h
>
> Look forward to your reply.
>
> Cheers!
> Bruce Liu (UTC +08)
> Email: ccieliu@gmail.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-12-28 13:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-23 8:32 "ethtool" missing "master-slave" args in "do_sset" function.[TEXT/PLAIN] Bruce Liu
-- strict thread matches above, loose matches on Subject: below --
2020-12-27 4:34 Bruce LIU
2020-12-27 9:46 ` Michal Kubecek
2020-12-28 13:35 ` Rudy Lei (shlei)
[not found] <CAHZX3B_KBEzny0ejSP73q+1Y-n=f=39jTXjzBCDB8Lsrn5U2gg@mail.gmail.com>
2020-12-23 8:31 ` Bruce Liu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.