All of lore.kernel.org
 help / color / mirror / Atom feed
* Question about max frequency in ad2s90
@ 2018-11-06  1:11 Matheus Tavares Bernardino
  2018-11-06 12:34 ` Ardelean, Alexandru
  0 siblings, 1 reply; 6+ messages in thread
From: Matheus Tavares Bernardino @ 2018-11-06  1:11 UTC (permalink / raw)
  To: linux-iio, graf.yang, jic23, Michael Hennerich; +Cc: kernel-usp, Victor Colombo

Hello everyone,

While working on the ad2s90 driver, I had a question about the maximum
frequency set. Any feedback will be much appreciated.

The ad2s90 driver sets its maximum speed to 830000hz (or 0.83Mhz), but
the datasheet [1] specifies a maximum of 2Mhz. Above the max_speed_hz
setup, there's a commentary saying  "need 600ns between CS and the
first falling edge of SCLK", which is also said in the datasheet.

Is max_speed_hz set to 0.83Mhz, not 2Mhz, due to the required minimum
delay of 600ns, somehow? If not:
  1) is 0.83Mhz really correct? and
  2) is the minimum delay of 600ns being respected?

Thanks,
Matheus.

[1] https://www.analog.com/media/en/technical-documentation/data-sheets/AD2S90.pdf

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2018-11-08  7:23 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-06  1:11 Question about max frequency in ad2s90 Matheus Tavares Bernardino
2018-11-06 12:34 ` Ardelean, Alexandru
2018-11-06 15:12   ` Matheus Tavares Bernardino
2018-11-07  8:31     ` Ardelean, Alexandru
2018-11-07 18:05   ` Matheus Tavares Bernardino
2018-11-08  7:23     ` Ardelean, Alexandru

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.