* bogus alignment messages - PCIe reset
@ 2016-06-06 9:35 Muni Sekhar
2016-06-06 19:21 ` Bjorn Helgaas
0 siblings, 1 reply; 3+ messages in thread
From: Muni Sekhar @ 2016-06-06 9:35 UTC (permalink / raw)
To: linux-pci
Hi,
What are these “bogus alignment” debug messages? I observed these
messages on resetting the PCIe device.
[ 4703.629970] pci_bus 0000:02: Allocating resources
[ 4703.630002] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
has bogus alignment
[ 4703.633804] pci_bus 0000:02: Allocating resources
[ 4703.633828] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
has bogus alignment
[ 4703.635736] pci_bus 0000:02: Allocating resources
[ 4703.635755] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
has bogus alignment
[ 4703.637074] pci_bus 0000:02: Allocating resources
[ 4703.637085] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
has bogus alignment
--
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: bogus alignment messages - PCIe reset
2016-06-06 9:35 bogus alignment messages - PCIe reset Muni Sekhar
@ 2016-06-06 19:21 ` Bjorn Helgaas
2016-06-07 13:16 ` Muni Sekhar
0 siblings, 1 reply; 3+ messages in thread
From: Bjorn Helgaas @ 2016-06-06 19:21 UTC (permalink / raw)
To: Muni Sekhar; +Cc: linux-pci
Hi Muni,
On Mon, Jun 06, 2016 at 03:05:17PM +0530, Muni Sekhar wrote:
> Hi,
>
>
> What are these “bogus alignment” debug messages? I observed these
> messages on resetting the PCIe device.
>
>
>
> [ 4703.629970] pci_bus 0000:02: Allocating resources
>
> [ 4703.630002] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
> has bogus alignment
>
> [ 4703.633804] pci_bus 0000:02: Allocating resources
>
> [ 4703.633828] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
> has bogus alignment
>
> [ 4703.635736] pci_bus 0000:02: Allocating resources
>
> [ 4703.635755] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
> has bogus alignment
>
> [ 4703.637074] pci_bus 0000:02: Allocating resources
>
> [ 4703.637085] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
> has bogus alignment
What kernel is this on? Can you collect the entire dmesg log?
I thought I fixed this with this change:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=63e22924f5dc
which appeared in v4.6-rc1.
Bjorn
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: bogus alignment messages - PCIe reset
2016-06-06 19:21 ` Bjorn Helgaas
@ 2016-06-07 13:16 ` Muni Sekhar
0 siblings, 0 replies; 3+ messages in thread
From: Muni Sekhar @ 2016-06-07 13:16 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci
[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]
On Tue, Jun 7, 2016 at 12:51 AM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> Hi Muni,
>
> On Mon, Jun 06, 2016 at 03:05:17PM +0530, Muni Sekhar wrote:
>> Hi,
>>
>>
>> What are these “bogus alignment” debug messages? I observed these
>> messages on resetting the PCIe device.
>>
>>
>>
>> [ 4703.629970] pci_bus 0000:02: Allocating resources
>>
>> [ 4703.630002] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
>> has bogus alignment
>>
>> [ 4703.633804] pci_bus 0000:02: Allocating resources
>>
>> [ 4703.633828] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
>> has bogus alignment
>>
>> [ 4703.635736] pci_bus 0000:02: Allocating resources
>>
>> [ 4703.635755] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
>> has bogus alignment
>>
>> [ 4703.637074] pci_bus 0000:02: Allocating resources
>>
>> [ 4703.637085] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]
>> has bogus alignment
>
> What kernel is this on? Can you collect the entire dmesg log?
I tried it on 3.16.0-30-generic.
>
> I thought I fixed this with this change:
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=63e22924f5dc
>
> which appeared in v4.6-rc1.
>
> Bjorn
--
Thanks,
Sekhar
[-- Attachment #2: dmesg_log --]
[-- Type: application/octet-stream, Size: 51965 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-30-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #40~14.04.1-Ubuntu SMP Thu Jan 15 17:43:14 UTC 2015 (Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=24f4b5e4-7e62-4a16-b80b-e3bd19ccd2ea ro quiet slub_debug=FZ kmemcheck=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd5d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd5d6000-0x00000000bd5dfbff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd5dfc00-0x00000000bd5dffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd5e0000-0x00000000bddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb04000-0x00000000feb05fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: RadiSys Corporation CEGM45 /CEGM45T2-SL9-0 , BIOS 08.00.45 07/24/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 3 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbd5d6 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x0009bc90-0x0009bc9f] mapped at [ffff88000009bc90]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE
[ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
[ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbd5d5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbd3fffff] page 2M
[ 0.000000] [mem 0xbd400000-0xbd5d5fff] page 4k
[ 0.000000] RAMDISK: [mem 0x35a96000-0x36d42fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9920 000024 (v02 PTECH )
[ 0.000000] ACPI: XSDT 0x00000000BD5D8DCD 000054 (v01 PTECH OEM00001 00000001 MSFT 0FE60097)
[ 0.000000] ACPI: FACP 0x00000000BD5D6000 0000F4 (v04 PTECH OEM00001 00000001 MSFT 0FE60097)
[ 0.000000] ACPI: DSDT 0x00000000BD5D8E21 006B77 (v01 PTECH DSDT0001 00000001 MSFT 02000002)
[ 0.000000] ACPI: FACS 0x00000000BD5DFC00 000040
[ 0.000000] ACPI: SLIC 0x00000000BD5D7D27 000024 (v01 PTECH SLIC 00000001 MSFT 02000002)
[ 0.000000] ACPI: MCFG 0x00000000BD5D7D4B 00003C (v01 PTLTD MCFG 06040000 LPT 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BD5D7D87 0000F8 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: APIC 0x00000000BD5D8D0D 00005C (v02 PTECH OEM00001 00000001 MSFT 0FE60097)
[ 0.000000] ACPI: BOOT 0x00000000BD5D8D69 000028 (v01 PTECH OEM00001 00000001 MSFT 0FE60097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xbd5d5fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1037680
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12056 pages used for memmap
[ 0.000000] DMA32 zone: 771542 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd5d6000-0xbd5defff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd5df000-0xbd5dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd5e0000-0xbddfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfeb05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb06000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021443
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=24f4b5e4-7e62-4a16-b80b-e3bd19ccd2ea ro quiet slub_debug=FZ kmemcheck=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-lts-utopic-3.16.0/drivers/iommu/dmar.c:760 warn_invalid_dmar+0x81/0x93()
[ 0.000000] Your BIOS is broken; DMAR reported at address feb03000 returns all ones!
[ 0.000000] BIOS vendor: Phoenix Technologies Ltd.; Ver: 08.00.45; Product Version: No System Version
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-30-generic #40~14.04.1-Ubuntu
[ 0.000000] Hardware name: RadiSys Corporation CEGM45 /CEGM45T2-SL9-0 , BIOS 08.00.45 07/24/2012
[ 0.000000] 000000000000000b ffffffff81c03e00 ffffffff81762590 ffffffff81c03e48
[ 0.000000] ffffffff81c03e38 ffffffff8106dd2d ffffffff81fbd01c ffffffff81fbd07c
[ 0.000000] 00000000feb03000 0000000000000000 ffffffff81c03fb0 ffffffff81c03e98
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81762590>] dump_stack+0x45/0x56
[ 0.000000] [<ffffffff8106dd2d>] warn_slowpath_common+0x7d/0xa0
[ 0.000000] [<ffffffff8106dde4>] warn_slowpath_fmt_taint+0x44/0x50
[ 0.000000] [<ffffffff8143329c>] ? acpi_tb_acquire_table+0x3e/0x6c
[ 0.000000] [<ffffffff81765070>] warn_invalid_dmar+0x81/0x93
[ 0.000000] [<ffffffff81d8989d>] detect_intel_iommu+0xe9/0x172
[ 0.000000] [<ffffffff81d3c84f>] pci_iommu_alloc+0x4a/0x6c
[ 0.000000] [<ffffffff81d4cb4b>] mem_init+0x17/0x9c
[ 0.000000] [<ffffffff81d31e80>] start_kernel+0x23b/0x47d
[ 0.000000] [<ffffffff81d31a4e>] ? set_init_arg+0x53/0x53
[ 0.000000] [<ffffffff81d31120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff81d315ee>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff81d31733>] x86_64_start_kernel+0x143/0x152
[ 0.000000] ---[ end trace 2b764a10d54d2f46 ]---
[ 0.000000] Memory: 3983276K/4150720K available (7615K kernel code, 1131K rwdata, 3596K rodata, 1356K init, 1300K bss, 167444K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 1866.659 MHz processor
[ 0.016016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.31 BogoMIPS (lpj=7466636)
[ 0.016020] pid_max: default: 32768 minimum: 301
[ 0.016068] ACPI: Core revision 20140424
[ 0.056950] ACPI: All ACPI Tables successfully acquired
[ 0.057081] Security Framework initialized
[ 0.057126] AppArmor: AppArmor initialized
[ 0.057128] Yama: becoming mindful.
[ 0.057853] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.060145] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.061156] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.061171] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.061914] Initializing cgroup subsys memory
[ 0.062028] Initializing cgroup subsys devices
[ 0.062054] Initializing cgroup subsys freezer
[ 0.062060] Initializing cgroup subsys net_cls
[ 0.062073] Initializing cgroup subsys blkio
[ 0.062083] Initializing cgroup subsys perf_event
[ 0.062088] Initializing cgroup subsys net_prio
[ 0.062109] Initializing cgroup subsys hugetlb
[ 0.062174] CPU: Physical Processor ID: 0
[ 0.062175] CPU: Processor Core ID: 0
[ 0.062178] mce: CPU supports 6 MCE banks
[ 0.062188] CPU0: Thermal monitoring enabled (TM2)
[ 0.062197] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.062197] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.062197] tlb_flushall_shift: -1
[ 0.062336] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
[ 0.064260] ftrace: allocating 29209 entries in 115 pages
[ 0.076168] dmar: Host address width 36
[ 0.076171] dmar: DRHD base: 0x000000feb03000 flags: 0x0
[ 0.076196] dmar: IOMMU: failed to map dmar0
[ 0.076203] dmar: parse DMAR table failure.
[ 0.076606] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.117828] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 0a)
[ 0.120000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.120000] ... version: 2
[ 0.120000] ... bit width: 40
[ 0.120000] ... generic registers: 2
[ 0.120000] ... value mask: 000000ffffffffff
[ 0.120000] ... max period: 000000007fffffff
[ 0.120000] ... fixed-purpose events: 3
[ 0.120000] ... event mask: 0000000700000003
[ 0.120447] x86: Booting SMP configuration:
[ 0.120450] .... node #0, CPUs: #1
[ 0.144042] x86: Booted up 1 node, 2 CPUs
[ 0.144047] smpboot: Total of 2 processors activated (7466.63 BogoMIPS)
[ 0.144143] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.148213] devtmpfs: initialized
[ 0.157015] evm: security.selinux
[ 0.157018] evm: security.SMACK64
[ 0.157020] evm: security.SMACK64EXEC
[ 0.157021] evm: security.SMACK64TRANSMUTE
[ 0.157023] evm: security.SMACK64MMAP
[ 0.157024] evm: security.ima
[ 0.157026] evm: security.capability
[ 0.157084] PM: Registering ACPI NVS region [mem 0xbd5dfc00-0xbd5dffff] (1024 bytes)
[ 0.160357] pinctrl core: initialized pinctrl subsystem
[ 0.160730] regulator-dummy: no parameters
[ 0.160799] RTC time: 6:30:10, date: 06/07/16
[ 0.161042] NET: Registered protocol family 16
[ 0.162011] cpuidle: using governor ladder
[ 0.162018] cpuidle: using governor menu
[ 0.162132] ACPI: bus type PCI registered
[ 0.162135] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.162546] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.162549] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.163067] PCI: Using configuration type 1 for base access
[ 0.163919] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.163921] mtrr: probably your BIOS does not setup all CPUs.
[ 0.163922] mtrr: corrected configuration.
[ 0.172510] ACPI: Added _OSI(Module Device)
[ 0.172513] ACPI: Added _OSI(Processor Device)
[ 0.172515] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172517] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.208873] ACPI Error: [ECON] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 0.208888] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node ffff88013b0309d8), AE_NOT_FOUND (20140424/psparse-536)
[ 0.208922] ACPI : EC: Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[ 0.208927] ACPI: Interpreter enabled
[ 0.208956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.209007] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.209009] ACPI: Using IOAPIC for interrupt routing
[ 0.209150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.385020] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.385036] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.385084] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.387351] PCI host bridge to bus 0000:00
[ 0.387356] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.387363] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.387369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.387375] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.387382] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.387388] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.387394] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfdffffff]
[ 0.387412] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.387436] DMAR: Forcing write-buffer flush capability
[ 0.387438] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.387951] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.387967] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfd3fffff 64bit]
[ 0.387976] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.387982] pci 0000:00:02.0: reg 0x20: [io 0xe898-0xe89f]
[ 0.388514] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.388527] pci 0000:00:02.1: reg 0x10: [mem 0xfd600000-0xfd6fffff 64bit]
[ 0.389089] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.389109] pci 0000:00:19.0: reg 0x10: [mem 0xfd5e0000-0xfd5fffff]
[ 0.389118] pci 0000:00:19.0: reg 0x14: [mem 0xfd5d9000-0xfd5d9fff]
[ 0.389128] pci 0000:00:19.0: reg 0x18: [io 0xec20-0xec3f]
[ 0.389195] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.389620] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.389797] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.389842] pci 0000:00:1a.0: reg 0x20: [io 0xec40-0xec5f]
[ 0.390389] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.390578] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.391029] pci 0000:00:1a.7: reg 0x10: [mem 0xfd5da000-0xfd5da3ff]
[ 0.391124] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.391543] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.391720] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.391738] pci 0000:00:1b.0: reg 0x10: [mem 0xfd5dc000-0xfd5dffff 64bit]
[ 0.391819] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392344] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.392428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.393084] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.393130] pci 0000:00:1d.0: reg 0x20: [io 0xec60-0xec7f]
[ 0.393657] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.393829] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.393874] pci 0000:00:1d.1: reg 0x20: [io 0xec80-0xec9f]
[ 0.394400] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.394570] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.394615] pci 0000:00:1d.2: reg 0x20: [io 0xeca0-0xecbf]
[ 0.395133] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.395304] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.395350] pci 0000:00:1d.3: reg 0x20: [io 0xecc0-0xecdf]
[ 0.395869] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.396010] pci 0000:00:1d.7: reg 0x10: [mem 0xfd5db000-0xfd5db3ff]
[ 0.396105] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.396496] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.396660] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.397188] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.397774] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.397791] pci 0000:00:1f.2: reg 0x10: [io 0xe8a0-0xe8a7]
[ 0.397800] pci 0000:00:1f.2: reg 0x14: [io 0xe8a8-0xe8ab]
[ 0.397809] pci 0000:00:1f.2: reg 0x18: [io 0xe8b0-0xe8b7]
[ 0.397818] pci 0000:00:1f.2: reg 0x1c: [io 0xe8b8-0xe8bb]
[ 0.397827] pci 0000:00:1f.2: reg 0x20: [io 0xe8e0-0xe8ef]
[ 0.397836] pci 0000:00:1f.2: reg 0x24: [io 0xe8f0-0xe8ff]
[ 0.398347] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.398364] pci 0000:00:1f.3: reg 0x10: [mem 0xfd5d8000-0xfd5d80ff 64bit]
[ 0.398386] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
[ 0.398876] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.398893] pci 0000:00:1f.5: reg 0x10: [io 0xe8c0-0xe8c7]
[ 0.398902] pci 0000:00:1f.5: reg 0x14: [io 0xe8c8-0xe8cb]
[ 0.398911] pci 0000:00:1f.5: reg 0x18: [io 0xe8d0-0xe8d7]
[ 0.398920] pci 0000:00:1f.5: reg 0x1c: [io 0xe8d8-0xe8db]
[ 0.398929] pci 0000:00:1f.5: reg 0x20: [io 0xec00-0xec0f]
[ 0.398938] pci 0000:00:1f.5: reg 0x24: [io 0xec10-0xec1f]
[ 0.399673] pci 0000:02:00.0: [1556:5555] type 00 class 0x080501
[ 0.400018] pci 0000:02:00.0: reg 0x10: [mem 0xfd800000-0xfdbfffff]
[ 0.400033] pci 0000:02:00.0: reg 0x14: [mem 0xfdffe000-0xfdffe1ff]
[ 0.400098] pci 0000:02:00.0: reg 0x30: [mem 0xfde00000-0xfdefffff pref]
[ 0.400264] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.408021] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.408035] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.408624] pci 0000:03:08.0: [1095:0680] type 00 class 0x010185
[ 0.408641] pci 0000:03:08.0: reg 0x10: [io 0xfcd0-0xfcd7]
[ 0.408649] pci 0000:03:08.0: reg 0x14: [io 0xfcd8-0xfcdb]
[ 0.408658] pci 0000:03:08.0: reg 0x18: [io 0xfce0-0xfce7]
[ 0.408666] pci 0000:03:08.0: reg 0x1c: [io 0xfce8-0xfceb]
[ 0.408675] pci 0000:03:08.0: reg 0x20: [io 0xfcf0-0xfcff]
[ 0.408683] pci 0000:03:08.0: reg 0x24: [mem 0xfd77f000-0xfd77f0ff]
[ 0.408692] pci 0000:03:08.0: reg 0x30: [mem 0xfd780000-0xfd7fffff pref]
[ 0.408723] pci 0000:03:08.0: supports D1 D2
[ 0.408848] pci 0000:03:08.0: System wakeup disabled by ACPI
[ 0.409025] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.409030] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.409035] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.409045] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.409051] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.409057] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.409063] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.409069] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.409075] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfdffffff] (subtractive decode)
[ 0.410981] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.411800] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.412617] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.413433] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
[ 0.414247] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11)
[ 0.415061] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 *11)
[ 0.415706] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *5
[ 0.416519] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *9 10 11)
[ 0.488661] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.489277] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.489613] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.489613] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.489613] vgaarb: loaded
[ 0.489613] vgaarb: bridge control possible 0000:00:02.0
[ 0.489786] SCSI subsystem initialized
[ 0.489809] libata version 3.00 loaded.
[ 0.489809] ACPI: bus type USB registered
[ 0.489809] usbcore: registered new interface driver usbfs
[ 0.489809] usbcore: registered new interface driver hub
[ 0.489809] usbcore: registered new device driver usb
[ 0.492280] PCI: Using ACPI for IRQ routing
[ 0.498682] PCI: pci_cache_line_size set to 64 bytes
[ 0.498736] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 0.498743] e820: reserve RAM buffer [mem 0xbd5d6000-0xbfffffff]
[ 0.499222] NetLabel: Initializing
[ 0.499224] NetLabel: domain hash size = 128
[ 0.499226] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.499273] NetLabel: unlabeled traffic allowed by default
[ 0.499335] Switched to clocksource refined-jiffies
[ 0.524270] AppArmor: AppArmor Filesystem Enabled
[ 0.524369] pnp: PnP ACPI init
[ 0.524418] ACPI: bus type PNP registered
[ 0.524784] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.525340] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.592164] pnp: PnP ACPI: found 2 devices
[ 0.592166] ACPI: bus type PNP unregistered
[ 0.605956] Switched to clocksource acpi_pm
[ 0.605995] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.606002] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.606011] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.606014] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.606020] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.606029] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.606031] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.606034] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.606037] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.606039] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.606042] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfdffffff]
[ 0.606045] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfdffffff]
[ 0.606048] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.606051] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.606053] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.606056] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.606059] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.606061] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.606064] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.606066] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfdffffff]
[ 0.606173] NET: Registered protocol family 2
[ 0.606554] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.606715] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.606936] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.606989] TCP: reno registered
[ 0.607003] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.607049] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.607198] NET: Registered protocol family 1
[ 0.607236] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.610621] PCI: CLS 64 bytes, default 64
[ 0.610763] Trying to unpack rootfs image as initramfs...
[ 0.904772] pci_bus 0000:02: Allocating resources
[ 0.904794] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.904800] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.904805] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 0.904824] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.904828] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.904839] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.904843] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.904851] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.904855] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.904861] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.904865] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.904872] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.904876] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.904881] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.906003] pci_bus 0000:02: Allocating resources
[ 0.906016] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 0.906021] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.906025] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.906030] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.906035] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.906042] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.906045] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.906051] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.907162] pci_bus 0000:02: Allocating resources
[ 0.907175] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 0.907180] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.907184] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.907189] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.907194] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.907200] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.907204] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.907209] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.908334] pci_bus 0000:02: Allocating resources
[ 0.908347] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 0.908352] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.908356] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.908361] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfdffffff]
[ 0.908366] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.908372] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.908376] pci 0000:00:1e.0: bridge window [io 0xf000-0xffff]
[ 0.908381] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.069720] Freeing initrd memory: 19124K (ffff880035a96000 - ffff880036d43000)
[ 1.069800] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.069805] software IO TLB [mem 0xb95d6000-0xbd5d6000] (64MB) mapped at [ffff8800b95d6000-ffff8800bd5d5fff]
[ 1.069900] Simple Boot Flag at 0x34 set to 0x80
[ 1.070453] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 1.070470] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 1.070634] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.070743] Scanning for low memory corruption every 60 seconds
[ 1.071900] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.071944] Initialise system trusted keyring
[ 1.072052] audit: initializing netlink subsys (disabled)
[ 1.072113] audit: type=2000 audit(1465281011.072:1): initialized
[ 1.073529] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.090803] zpool: loaded
[ 1.090811] zbud: loaded
[ 1.092660] VFS: Disk quotas dquot_6.5.2
[ 1.092837] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.097133] fuse init (API version 7.23)
[ 1.097603] msgmni has been set to 7817
[ 1.097874] Key type big_key registered
[ 1.098837] Key type asymmetric registered
[ 1.098852] Asymmetric key parser 'x509' registered
[ 1.099049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.099165] io scheduler noop registered
[ 1.099179] io scheduler deadline registered (default)
[ 1.099635] io scheduler cfq registered
[ 1.100226] pcieport 0000:00:1c.0: enabling device (0006 -> 0007)
[ 1.100720] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.101043] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.101138] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.101425] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.101427] vesafb: scrolling: redraw
[ 1.101430] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.101454] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[ 1.128748] Console: switching to colour frame buffer device 128x48
[ 1.155928] fb0: VESA VGA frame buffer device
[ 1.156037] intel_idle: does not run on family 6 model 23
[ 1.156405] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.156413] ACPI: Power Button [PWRB]
[ 1.156671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.156676] ACPI: Power Button [PWRF]
[ 1.157143] Monitor-Mwait will be used to enter C-1 state
[ 1.157150] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.157160] ACPI: acpi_idle registered with cpuidle
[ 1.162677] ACPI Error: [CTYP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 1.162692] ACPI Error: Method parse/execution failed [\_TZ_.TZ00._SCP] (Node ffff88013b0242a0), AE_NOT_FOUND (20140424/psparse-536)
[ 1.164656] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.164659] ACPI: Thermal Zone [TZ00] (33 C)
[ 1.164763] GHES: HEST is not enabled!
[ 1.165189] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.172313] Linux agpgart interface v0.103
[ 1.172505] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.172533] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.174573] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.174830] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.182797] brd: module loaded
[ 1.186528] loop: module loaded
[ 1.187406] ata_piix 0000:00:1f.2: version 2.13
[ 1.187851] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.195067] scsi0 : ata_piix
[ 1.195728] scsi1 : ata_piix
[ 1.195978] ata1: SATA max UDMA/133 cmd 0xe8a0 ctl 0xe8a8 bmdma 0xe8e0 irq 17
[ 1.195982] ata2: SATA max UDMA/133 cmd 0xe8b0 ctl 0xe8b8 bmdma 0xe8e8 irq 17
[ 1.196445] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.202304] scsi2 : ata_piix
[ 1.202688] scsi3 : ata_piix
[ 1.202936] ata3: SATA max UDMA/133 cmd 0xe8c0 ctl 0xe8c8 bmdma 0xec00 irq 17
[ 1.202940] ata4: SATA max UDMA/133 cmd 0xe8d0 ctl 0xe8d8 bmdma 0xec08 irq 17
[ 1.203448] libphy: Fixed MDIO Bus: probed
[ 1.203460] tun: Universal TUN/TAP device driver, 1.6
[ 1.203462] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.203650] PPP generic driver version 2.4.2
[ 1.203867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.203883] ehci-pci: EHCI PCI platform driver
[ 1.204368] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.204386] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.204404] ehci-pci 0000:00:1a.7: debug port 1
[ 1.208331] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.208363] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfd5da000
[ 1.220486] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.220630] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.220633] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220636] usb usb1: Product: EHCI Host Controller
[ 1.220639] usb usb1: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
[ 1.220641] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.221122] hub 1-0:1.0: USB hub found
[ 1.221154] hub 1-0:1.0: 4 ports detected
[ 1.222115] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.222128] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.222143] ehci-pci 0000:00:1d.7: debug port 1
[ 1.226062] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.226092] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfd5db000
[ 1.236483] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.236631] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.236634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.236637] usb usb2: Product: EHCI Host Controller
[ 1.236639] usb usb2: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
[ 1.236642] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.237086] hub 2-0:1.0: USB hub found
[ 1.237111] hub 2-0:1.0: 8 ports detected
[ 1.237925] ehci-platform: EHCI generic platform driver
[ 1.237961] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.237974] ohci-pci: OHCI PCI platform driver
[ 1.238013] ohci-platform: OHCI generic platform driver
[ 1.238048] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.238602] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.238618] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.238629] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.238672] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ec40
[ 1.238882] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.238886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.238888] usb usb3: Product: UHCI Host Controller
[ 1.238891] usb usb3: Manufacturer: Linux 3.16.0-30-generic uhci_hcd
[ 1.238893] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.239434] hub 3-0:1.0: USB hub found
[ 1.239479] hub 3-0:1.0: 2 ports detected
[ 1.240997] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.241010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.241026] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.241050] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ec60
[ 1.241238] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.241242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.241244] usb usb4: Product: UHCI Host Controller
[ 1.241247] usb usb4: Manufacturer: Linux 3.16.0-30-generic uhci_hcd
[ 1.241249] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.241776] hub 4-0:1.0: USB hub found
[ 1.241816] hub 4-0:1.0: 2 ports detected
[ 1.242663] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.242680] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.242694] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.242739] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ec80
[ 1.242906] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.242909] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.242912] usb usb5: Product: UHCI Host Controller
[ 1.242914] usb usb5: Manufacturer: Linux 3.16.0-30-generic uhci_hcd
[ 1.242917] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.243408] hub 5-0:1.0: USB hub found
[ 1.243441] hub 5-0:1.0: 2 ports detected
[ 1.244261] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.244275] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.244288] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.244333] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000eca0
[ 1.244479] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.244482] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.244485] usb usb6: Product: UHCI Host Controller
[ 1.244487] usb usb6: Manufacturer: Linux 3.16.0-30-generic uhci_hcd
[ 1.244490] usb usb6: SerialNumber: 0000:00:1d.2
[ 1.244960] hub 6-0:1.0: USB hub found
[ 1.244988] hub 6-0:1.0: 2 ports detected
[ 1.245816] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.245828] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 1.245839] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.245884] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ecc0
[ 1.246071] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.246074] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246077] usb usb7: Product: UHCI Host Controller
[ 1.246080] usb usb7: Manufacturer: Linux 3.16.0-30-generic uhci_hcd
[ 1.246082] usb usb7: SerialNumber: 0000:00:1d.3
[ 1.246585] hub 7-0:1.0: USB hub found
[ 1.246623] hub 7-0:1.0: 2 ports detected
[ 1.247377] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.267512] i8042: No controller found
[ 2.277320] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.288121] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.288186] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.288303] mousedev: PS/2 mouse device common for all mice
[ 2.288886] rtc_cmos 00:01: RTC can wake from S4
[ 2.289182] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.289214] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram
[ 2.289750] device-mapper: uevent: version 1.0.3
[ 2.290302] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.290367] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.290786] TCP: cubic registered
[ 2.291884] NET: Registered protocol family 10
[ 2.292825] NET: Registered protocol family 17
[ 2.292871] Key type dns_resolver registered
[ 2.294277] Loading compiled-in X.509 certificates
[ 2.295751] Loaded X.509 cert 'Magrathea: Glacier signing key: 7be2a7200f17f00ca011f70e5a874c37e3e0f6be'
[ 2.295795] registered taskstats version 1
[ 2.299648] Key type trusted registered
[ 2.302963] Key type encrypted registered
[ 2.306181] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.306192] ima: No TPM chip found, activating TPM-bypass!
[ 2.306261] evm: HMAC attrs: 0x1
[ 2.307350] Magic number: 4:636:518
[ 2.307358] usb usb3-port1: hash matches
[ 2.307486] rtc_cmos 00:01: setting system clock to 2016-06-07 06:30:12 UTC (1465281012)
[ 2.309138] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.309140] EDD information not available.
[ 2.309453] PM: Hibernation image not present or could not be loaded.
[ 2.400535] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 2.432089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.456789] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[ 2.456793] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.472997] ata1.00: configured for UDMA/133
[ 2.473295] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[ 2.474048] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.474150] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.474263] sd 0:0:0:0: [sda] Write Protect is off
[ 2.474266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.474348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.475934] sda: sda1 sda2 < sda5 sda6 >
[ 2.477345] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.479176] Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000)
[ 2.479179] Write protecting the kernel read-only data: 12288k
[ 2.481423] Freeing unused kernel memory: 564K (ffff880001773000 - ffff880001800000)
[ 2.483385] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
[ 2.503865] systemd-udevd[113]: starting version 204
[ 2.531531] pps_core: LinuxPPS API ver. 1 registered
[ 2.531535] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.533522] usb 2-3: New USB device found, idVendor=0424, idProduct=2514
[ 2.533526] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.534190] hub 2-3:1.0: USB hub found
[ 2.534268] hub 2-3:1.0: 3 ports detected
[ 2.540315] PTP clock support registered
[ 2.547165] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.547168] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.548856] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.548884] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 2.566793] sdhci: Secure Digital Host Controller Interface driver
[ 2.566796] sdhci: Copyright(c) Pierre Ossman
[ 2.569081] sdhci-pci 0000:02:00.0: SDHCI controller found [1556:5555] (rev 0)
[ 2.569334] mmc0: no vqmmc regulator found
[ 2.569337] mmc0: no vmmc regulator found
[ 2.569677] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 2.574019] pata_sil680 0000:03:08.0: version 0.4.9
[ 2.574039] pata_sil680 0000:03:08.0: enabling device (0000 -> 0003)
[ 2.574429] sil680: 133MHz clock.
[ 2.576193] scsi4 : pata_sil680
[ 2.576561] scsi5 : pata_sil680
[ 2.576784] ata5: PATA max UDMA/133 cmd 0xfcd0 ctl 0xfcd8 bmdma 0xfcf0 irq 19
[ 2.576786] ata6: PATA max UDMA/133 cmd 0xfce0 ctl 0xfce8 bmdma 0xfcf8 irq 19
[ 2.644120] usb 2-8: new high-speed USB device number 3 using ehci-pci
[ 2.776458] usb 2-8: New USB device found, idVendor=0424, idProduct=2514
[ 2.776462] usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.777097] hub 2-8:1.0: USB hub found
[ 2.777305] hub 2-8:1.0: 4 ports detected
[ 2.778760] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:00:50:b8:7a:21
[ 2.778764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.778789] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 2.854247] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.015390] random: init urandom read with 37 bits of entropy available
[ 3.052774] init: plymouth-upstart-bridge main process (168) terminated with status 1
[ 3.052797] init: plymouth-upstart-bridge main process ended, respawning
[ 3.061657] usb 2-8.4: new low-speed USB device number 4 using ehci-pci
[ 3.065700] init: plymouth-upstart-bridge main process (178) terminated with status 1
[ 3.065725] init: plymouth-upstart-bridge main process ended, respawning
[ 3.074062] init: plymouth-upstart-bridge main process (181) terminated with status 1
[ 3.074086] init: plymouth-upstart-bridge main process ended, respawning
[ 3.173902] usb 2-8.4: New USB device found, idVendor=413c, idProduct=2003
[ 3.173907] usb 2-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.173910] usb 2-8.4: Product: Dell USB Keyboard
[ 3.173913] usb 2-8.4: Manufacturer: Dell
[ 3.327565] Adding 4655100k swap on /dev/sda6. Priority:-1 extents:1 across:4655100k SSFS
[ 3.556287] systemd-udevd[300]: starting version 204
[ 3.647121] lp: driver loaded but no devices found
[ 3.767044] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.825023] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.834473] audit: type=1400 audit(1465281014.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=354 comm="apparmor_parser"
[ 3.834484] audit: type=1400 audit(1465281014.023:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=354 comm="apparmor_parser"
[ 3.834493] audit: type=1400 audit(1465281014.023:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=354 comm="apparmor_parser"
[ 3.835090] audit: type=1400 audit(1465281014.023:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=354 comm="apparmor_parser"
[ 3.835103] audit: type=1400 audit(1465281014.023:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=354 comm="apparmor_parser"
[ 3.835527] audit: type=1400 audit(1465281014.023:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=354 comm="apparmor_parser"
[ 3.847895] audit: type=1400 audit(1465281014.035:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=358 comm="apparmor_parser"
[ 3.884292] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.914911] [drm] Initialized drm 1.1.0 20060810
[ 3.923774] usbcore: registered new interface driver usbhid
[ 3.923778] usbhid: USB HID core driver
[ 3.927722] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000105e (\PMIO) (20140424/utaddress-258)
[ 3.927731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.931958] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.938145] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.036569] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 4.140091] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 4.140267] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.223559] [drm] Memory usable by graphics device = 2048M
[ 4.223567] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 4.223570] fb: switching to inteldrmfb from VESA VGA
[ 4.223600] Console: switching to colour dummy device 80x25
[ 4.230964] [drm] Replacing VGA console driver
[ 4.254325] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 4.254356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.254358] [drm] Driver supports precise vblank timestamp query.
[ 4.254525] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.406941] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 4.422779] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8.4/2-8.4:1.0/0003:413C:2003.0001/input/input2
[ 4.438575] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-8.4/input0
[ 4.545860] fbcon: inteldrmfb (fb0) is primary device
[ 5.752133] Console: switching to colour frame buffer device 128x48
[ 5.754922] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.754925] i915 0000:00:02.0: registered panic notifier
[ 5.756137] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.817638] random: nonblocking pool is initialized
[ 6.560920] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.561057] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 99.053611] pci_bus 0000:02: Allocating resources
[ 99.053641] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 99.055933] pci_bus 0000:02: Allocating resources
[ 99.055953] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 99.057879] pci_bus 0000:02: Allocating resources
[ 99.057895] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 99.058877] pci_bus 0000:02: Allocating resources
[ 99.058887] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-06-07 13:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-06 9:35 bogus alignment messages - PCIe reset Muni Sekhar
2016-06-06 19:21 ` Bjorn Helgaas
2016-06-07 13:16 ` Muni Sekhar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.